Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- martctl 7.5 2025-04-30 r5714 [x86_64-linux-6.18.18-gentoo-dist] (local build)
- Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Model Family: Toshiba P300 (CMR)
- Device Model: TOSHIBA HDWD120
- Serial Number: 000
- LU WWN Device Id: 000
- Firmware Version: MX4OACF0
- User Capacity: 2 000 398 934 016 bytes [2,00 TB]
- Sector Sizes: 512 bytes logical, 4096 bytes physical
- Rotation Rate: 7200 rpm
- Form Factor: 3.5 inches
- Device is: In smartctl database 7.5/5706
- ATA Version is: ATA8-ACS T13/1699-D revision 4
- SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
- Local Time is: Sun Apr 19 10:13:56 2026 MSK
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- AAM feature is: Unavailable
- APM feature is: Disabled
- Rd look-ahead is: Enabled
- Write cache is: Enabled
- DSN feature is: Unavailable
- ATA Security is: Disabled, NOT FROZEN [SEC1]
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x84) Offline data collection activity
- was suspended by an interrupting command from host.
- Auto Offline Data Collection: Enabled.
- Self-test execution status: ( 25) The self-test routine was aborted by
- the host.
- Total time to complete Offline
- data collection: (14535) seconds.
- Offline data collection
- capabilities: (0x5b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- No Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 1) minutes.
- Extended self-test routine
- recommended polling time: ( 243) minutes.
- SCT capabilities: (0x003d) SCT Status supported.
- SCT Error Recovery Control supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 16
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
- 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0
- 2 Throughput_Performance P-S--- 141 141 054 - 65
- 3 Spin_Up_Time POS--- 127 127 024 - 299 (Average 296)
- 4 Start_Stop_Count -O--C- 097 097 000 - 13740
- 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0
- 7 Seek_Error_Rate PO-R-- 100 100 067 - 0
- 8 Seek_Time_Performance P-S--- 126 126 020 - 32
- 9 Power_On_Hours -O--C- 097 097 000 - 22398
- 10 Spin_Retry_Count PO--C- 100 100 060 - 0
- 12 Power_Cycle_Count -O--CK 100 100 000 - 3856
- 192 Power-Off_Retract_Count -O--CK 089 089 000 - 13919
- 193 Load_Cycle_Count -O--C- 089 089 000 - 13919
- 194 Temperature_Celsius -O---- 153 153 000 - 39 (Min/Max 16/53)
- 196 Reallocated_Event_Count -O--CK 100 100 000 - 0
- 197 Current_Pending_Sector -O---K 100 100 000 - 0
- 198 Offline_Uncorrectable ---R-- 100 100 000 - 0
- 199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 2
- ||||||_ K auto-keep
- |||||__ C event count
- ||||___ R error rate
- |||____ S speed/performance
- ||_____ O updated online
- |______ P prefailure warning
- General Purpose Log Directory Version 1
- SMART Log Directory Version 1 [multi-sector log support]
- Address Access R/W Size Description
- 0x00 GPL,SL R/O 1 Log Directory
- 0x01 SL R/O 1 Summary SMART error log
- 0x03 GPL R/O 1 Ext. Comprehensive SMART error log
- 0x04 GPL R/O 7 Device Statistics log
- 0x06 SL R/O 1 SMART self-test log
- 0x07 GPL R/O 1 Extended self-test log
- 0x08 GPL R/O 2 Power Conditions log
- 0x09 SL R/W 1 Selective self-test log
- 0x10 GPL R/O 1 NCQ Command Error log
- 0x11 GPL R/O 1 SATA Phy Event Counters log
- 0x20 GPL R/O 1 Streaming performance log
- 0x21 GPL R/O 1 Write stream error log
- 0x22 GPL R/O 1 Read stream error log
- 0x80-0x9f GPL,SL R/W 16 Host vendor specific log
- 0xe0 GPL,SL R/W 1 SCT Command/Status
- 0xe1 GPL,SL R/W 1 SCT Data Transfer
- SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
- Device Error Count: 2
- CR = Command Register
- FEATR = Features Register
- COUNT = Count (was: Sector Count) Register
- LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
- LH = LBA High (was: Cylinder High) Register ] LBA
- LM = LBA Mid (was: Cylinder Low) Register ] Register
- LL = LBA Low (was: Sector Number) Register ]
- DV = Device (was: Device/Head) Register
- DC = Device Control Register
- ER = Error register
- ST = Status register
- Powered_Up_Time is measured from power on, and printed as
- DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
- SS=sec, and sss=millisec. It "wraps" after 49.710 days.
- Error 2 [1] occurred at disk power-on lifetime: 12459 hours (519 days + 3 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 84 -- 51 00 01 00 00 9c b3 00 5f 0c 00 Error: ABRT
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 2f 00 00 00 01 00 00 00 00 00 10 e0 00 15:32:54.322 READ LOG EXT
- 61 00 08 00 e8 00 00 9c b3 00 58 40 00 15:32:54.322 WRITE FPDMA QUEUED
- b0 00 d0 00 00 00 00 00 c2 4f 00 a1 00 15:32:50.894 SMART READ DATA
- b0 00 da 00 00 00 00 00 c2 4f 00 a0 00 15:32:50.728 SMART RETURN STATUS
- 61 00 08 00 d0 00 00 50 93 e8 70 40 00 15:32:49.754 WRITE FPDMA QUEUED
- Error 1 [0] occurred at disk power-on lifetime: 12290 hours (512 days + 2 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 84 -- 51 00 10 00 00 9c b4 eb 28 0c 00 Error: ICRC, ABRT at LBA = 0x9cb4eb28 = 2629102376
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 61 00 20 00 e8 00 00 9c b4 eb 18 40 00 03:06:12.131 WRITE FPDMA QUEUED
- 61 00 08 00 e0 00 00 50 93 e8 70 40 00 03:06:07.001 WRITE FPDMA QUEUED
- 61 00 08 00 d8 00 00 63 90 da 40 40 00 03:06:07.001 WRITE FPDMA QUEUED
- 61 00 08 00 d0 00 00 50 85 78 28 40 00 03:06:07.000 WRITE FPDMA QUEUED
- 61 00 08 00 c8 00 00 7c 75 cc 78 40 00 03:06:07.000 WRITE FPDMA QUEUED
- SMART Extended Self-test Log Version: 1 (1 sectors)
- Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
- # 1 Extended offline Aborted by host 90% 22398 -
- # 2 Extended offline Completed without error 00% 22390 -
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
- SCT Status Version: 3
- SCT Version (vendor specific): 256 (0x0100)
- Device State: SMART Off-line Data Collection executing in background (4)
- Current Temperature: 40 Celsius
- Power Cycle Min/Max Temperature: 35/41 Celsius
- Lifetime Min/Max Temperature: 16/53 Celsius
- Under/Over Temperature Limit Count: 0/0
- SCT Temperature History Version: 2
- Temperature Sampling Period: 1 minute
- Temperature Logging Interval: 1 minute
- Min/Max recommended Temperature: 0/60 Celsius
- Min/Max Temperature Limit: -40/70 Celsius
- Temperature History Size (Index): 128 (14)
- Index Estimated Time Temperature Celsius
- 15 2026-04-19 08:06 37 ******************
- ... ..( 29 skipped). .. ******************
- 45 2026-04-19 08:36 37 ******************
- 46 2026-04-19 08:37 36 *****************
- ... ..( 16 skipped). .. *****************
- 63 2026-04-19 08:54 36 *****************
- 64 2026-04-19 08:55 35 ****************
- ... ..( 43 skipped). .. ****************
- 108 2026-04-19 09:39 35 ****************
- 109 2026-04-19 09:40 36 *****************
- 110 2026-04-19 09:41 35 ****************
- 111 2026-04-19 09:42 35 ****************
- 112 2026-04-19 09:43 36 *****************
- ... ..( 7 skipped). .. *****************
- 120 2026-04-19 09:51 36 *****************
- 121 2026-04-19 09:52 37 ******************
- ... ..( 5 skipped). .. ******************
- 127 2026-04-19 09:58 37 ******************
- 0 2026-04-19 09:59 38 *******************
- ... ..( 5 skipped). .. *******************
- 6 2026-04-19 10:05 38 *******************
- 7 2026-04-19 10:06 39 ********************
- 8 2026-04-19 10:07 38 *******************
- 9 2026-04-19 10:08 39 ********************
- ... ..( 4 skipped). .. ********************
- 14 2026-04-19 10:13 39 ********************
- SCT Error Recovery Control:
- Read: Disabled
- Write: Disabled
- Device Statistics (GP Log 0x04)
- Page Offset Size Value Flags Description
- 0x01 ===== = = === == General Statistics (rev 1) ==
- 0x01 0x008 4 3856 --- Lifetime Power-On Resets
- 0x01 0x010 4 22398 --- Power-on Hours
- 0x01 0x018 6 28729913589 --- Logical Sectors Written
- 0x01 0x020 6 162932209 --- Number of Write Commands
- 0x01 0x028 6 44092590897 --- Logical Sectors Read
- 0x01 0x030 6 268270411 --- Number of Read Commands
- 0x03 ===== = = === == Rotating Media Statistics (rev 1) ==
- 0x03 0x008 4 17041 --- Spindle Motor Power-on Hours
- 0x03 0x010 4 17041 --- Head Flying Hours
- 0x03 0x018 4 13919 --- Head Load Events
- 0x03 0x020 4 0 --- Number of Reallocated Logical Sectors
- 0x03 0x028 4 8 --- Read Recovery Attempts
- 0x03 0x030 4 12 --- Number of Mechanical Start Failures
- 0x04 ===== = = === == General Errors Statistics (rev 1) ==
- 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
- 0x04 0x010 4 4 --- Resets Between Cmd Acceptance and Completion
- 0x05 ===== = = === == Temperature Statistics (rev 1) ==
- 0x05 0x008 1 40 --- Current Temperature
- 0x05 0x010 1 39 N-- Average Short Term Temperature
- 0x05 0x018 1 35 N-- Average Long Term Temperature
- 0x05 0x020 1 53 --- Highest Temperature
- 0x05 0x028 1 16 --- Lowest Temperature
- 0x05 0x030 1 43 N-- Highest Average Short Term Temperature
- 0x05 0x038 1 25 N-- Lowest Average Short Term Temperature
- 0x05 0x040 1 41 N-- Highest Average Long Term Temperature
- 0x05 0x048 1 25 N-- Lowest Average Long Term Temperature
- 0x05 0x050 4 0 --- Time in Over-Temperature
- 0x05 0x058 1 60 --- Specified Maximum Operating Temperature
- 0x05 0x060 4 0 --- Time in Under-Temperature
- 0x05 0x068 1 0 --- Specified Minimum Operating Temperature
- 0x06 ===== = = === == Transport Statistics (rev 1) ==
- 0x06 0x008 4 36072 --- Number of Hardware Resets
- 0x06 0x010 4 18760 --- Number of ASR Events
- 0x06 0x018 4 2 --- Number of Interface CRC Errors
- |||_ C monitored condition met
- ||__ D supports DSN
- |___ N normalized value
- Pending Defects log (GP Log 0x0c) not supported
- SATA Phy Event Counters (GP Log 0x11)
- ID Size Value Description
- 0x0001 2 0 Command failed due to ICRC error
- 0x0002 2 0 R_ERR response for data FIS
- 0x0003 2 0 R_ERR response for device-to-host data FIS
- 0x0004 2 0 R_ERR response for host-to-device data FIS
- 0x0005 2 0 R_ERR response for non-data FIS
- 0x0006 2 0 R_ERR response for device-to-host non-data FIS
- 0x0007 2 0 R_ERR response for host-to-device non-data FIS
- 0x0009 2 876 Transition from drive PhyRdy to drive PhyNRdy
- 0x000a 2 0 Device-to-host register FISes sent due to a COMRESET
- 0x000b 2 0 CRC errors within host-to-device FIS
- 0x000d 2 0 Non-CRC errors within host-to-device FIS
Advertisement
Add Comment
Please, Sign In to add comment
