Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] Initializing cgroup subsys cpuset
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Linux version 3.2.0-0.bpo.4-686-pae (debian-kernel@lists.debian.org) (gcc version 4.4.5 (Debian 4.4.5-8) ) #1 SMP Debian 3.2.46-1~bpo60+1
- [ 0.000000] BIOS-provided physical RAM map:
- [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
- [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
- [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
- [ 0.000000] BIOS-e820: 0000000000100000 - 0000000066b3f000 (usable)
- [ 0.000000] BIOS-e820: 0000000066b3f000 - 0000000066bbf000 (reserved)
- [ 0.000000] BIOS-e820: 0000000066bbf000 - 0000000066ebf000 (ACPI NVS)
- [ 0.000000] BIOS-e820: 0000000066ebf000 - 0000000066ef5000 (ACPI data)
- [ 0.000000] BIOS-e820: 0000000066ef5000 - 0000000066f00000 (usable)
- [ 0.000000] BIOS-e820: 0000000066f00000 - 000000007f000000 (reserved)
- [ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
- [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
- [ 0.000000] BIOS-e820: 00000000fec10000 - 00000000fec11000 (reserved)
- [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
- [ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
- [ 0.000000] NX (Execute Disable) protection: active
- [ 0.000000] SMBIOS 2.7 present.
- [ 0.000000] DMI: Hewlett-Packard HP 635 Notebook PC /3577, BIOS F.34 07/27/2011
- [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
- [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
- [ 0.000000] last_pfn = 0x66f00 max_arch_pfn = 0x1000000
- [ 0.000000] MTRR default type: uncachable
- [ 0.000000] MTRR fixed ranges enabled:
- [ 0.000000] 00000-9FFFF write-back
- [ 0.000000] A0000-BFFFF uncachable
- [ 0.000000] C0000-FFFFF write-through
- [ 0.000000] MTRR variable ranges enabled:
- [ 0.000000] 0 base 000000000 mask FC0000000 write-back
- [ 0.000000] 1 base 040000000 mask FE0000000 write-back
- [ 0.000000] 2 base 060000000 mask FF8000000 write-back
- [ 0.000000] 3 base 066EBD000 mask FFFFFF000 uncachable
- [ 0.000000] 4 base 0FFE00000 mask FFFE00000 write-protect
- [ 0.000000] 5 disabled
- [ 0.000000] 6 disabled
- [ 0.000000] 7 disabled
- [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
- [ 0.000000] found SMP MP-table at [c00fe1b0] fe1b0
- [ 0.000000] initial memory mapped : 0 - 01a00000
- [ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
- [ 0.000000] init_memory_mapping: 0000000000000000-00000000379fe000
- [ 0.000000] 0000000000 - 0000200000 page 4k
- [ 0.000000] 0000200000 - 0037800000 page 2M
- [ 0.000000] 0037800000 - 00379fe000 page 4k
- [ 0.000000] kernel direct mapping tables up to 379fe000 @ 19f9000-1a00000
- [ 0.000000] RAMDISK: 370dc000 - 37ff0000
- [ 0.000000] Allocated new RAMDISK: 361c8000 - 370db7fe
- [ 0.000000] Move RAMDISK from 00000000370dc000 - 0000000037fef7fd to 361c8000 - 370db7fd
- [ 0.000000] ACPI: RSDP 000fe020 00024 (v02 HPQOEM)
- [ 0.000000] ACPI: XSDT 66ef4120 00074 (v01 HPQOEM SLIC-MPC 00000001 01000013)
- [ 0.000000] ACPI: FACP 66ef3000 000F4 (v04 HPQOEM SLIC-MPC 00000001 ACPI 00040000)
- [ 0.000000] ACPI: DSDT 66ee0000 0E509 (v01 HP INSYDE F0000000 ACPI 00040000)
- [ 0.000000] ACPI: FACS 66c96000 00040
- [ 0.000000] ACPI: HPET 66ef2000 00038 (v01 HP INSYDE 00000001 ACPI 00040000)
- [ 0.000000] ACPI: APIC 66ef1000 00084 (v02 HP INSYDE 00000001 ACPI 00040000)
- [ 0.000000] ACPI: MCFG 66ef0000 0003C (v01 HP INSYDE 00000001 ACPI 00040000)
- [ 0.000000] ACPI: ASF! 66eef000 000A5 (v32 HP INSYDE 00000001 ACPI 00040000)
- [ 0.000000] ACPI: BOOT 66edf000 00028 (v01 HP INSYDE 00000001 ACPI 00040000)
- [ 0.000000] ACPI: SLIC 66ede000 00176 (v01 HPQOEM SLIC-MPC 00000001 ACPI 00040000)
- [ 0.000000] ACPI: MSDM 66edd000 00055 (v03 HP INSYDE 00000001 ACPI 00040000)
- [ 0.000000] ACPI: SSDT 66edc000 003DE (v01 HP INSYDE 00000001 AMD 00000001)
- [ 0.000000] ACPI: SSDT 66eda000 0168E (v02 HP INSYDE 00000001 MSFT 04000000)
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] 757MB HIGHMEM available.
- [ 0.000000] 889MB LOWMEM available.
- [ 0.000000] mapped low ram: 0 - 379fe000
- [ 0.000000] low ram: 0 - 379fe000
- [ 0.000000] Zone PFN ranges:
- [ 0.000000] DMA 0x00000010 -> 0x00001000
- [ 0.000000] Normal 0x00001000 -> 0x000379fe
- [ 0.000000] HighMem 0x000379fe -> 0x00066f00
- [ 0.000000] Movable zone start PFN for each node
- [ 0.000000] early_node_map[3] active PFN ranges
- [ 0.000000] 0: 0x00000010 -> 0x0000009f
- [ 0.000000] 0: 0x00000100 -> 0x00066b3f
- [ 0.000000] 0: 0x00066ef5 -> 0x00066f00
- [ 0.000000] On node 0 totalpages: 420569
- [ 0.000000] free_area_init_node: node 0, pgdat c1420a00, node_mem_map f54e8200
- [ 0.000000] DMA zone: 32 pages used for memmap
- [ 0.000000] DMA zone: 0 pages reserved
- [ 0.000000] DMA zone: 3951 pages, LIFO batch:0
- [ 0.000000] Normal zone: 1748 pages used for memmap
- [ 0.000000] Normal zone: 221994 pages, LIFO batch:31
- [ 0.000000] HighMem zone: 1515 pages used for memmap
- [ 0.000000] HighMem zone: 191329 pages, LIFO batch:31
- [ 0.000000] Using APIC driver default
- [ 0.000000] ACPI: PM-Timer IO Port: 0x408
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] disabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
- [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
- [ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
- [ 0.000000] ACPI: IRQ0 used by override.
- [ 0.000000] ACPI: IRQ2 used by override.
- [ 0.000000] ACPI: IRQ9 used by override.
- [ 0.000000] Using ACPI (MADT) for SMP configuration information
- [ 0.000000] ACPI: HPET id: 0x43538210 base: 0xfed00000
- [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
- [ 0.000000] nr_irqs_gsi: 40
- [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
- [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
- [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
- [ 0.000000] Allocating PCI resources starting at 7f000000 (gap: 7f000000:79000000)
- [ 0.000000] Booting paravirtualized kernel on bare hardware
- [ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1
- [ 0.000000] PERCPU: Embedded 14 pages/cpu @f79bc000 s33344 r0 d24000 u57344
- [ 0.000000] pcpu-alloc: s33344 r0 d24000 u57344 alloc=14*4096
- [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 417274
- [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-0.bpo.4-686-pae root=UUID=f50b5158-410c-4dcb-91ca-2f1f42be099a ro quiet splash
- [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
- [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
- [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.000000] Initializing CPU#0
- [ 0.000000] Initializing HighMem for node 0 (000379fe:00066f00)
- [ 0.000000] Memory: 1647268k/1686528k available (2935k kernel code, 35008k reserved, 1321k data, 444k init, 771376k highmem)
- [ 0.000000] virtual kernel memory layout:
- [ 0.000000] fixmap : 0xffd36000 - 0xfffff000 (2852 kB)
- [ 0.000000] pkmap : 0xffa00000 - 0xffc00000 (2048 kB)
- [ 0.000000] vmalloc : 0xf81fe000 - 0xff9fe000 ( 120 MB)
- [ 0.000000] lowmem : 0xc0000000 - 0xf79fe000 ( 889 MB)
- [ 0.000000] .init : 0xc1429000 - 0xc1498000 ( 444 kB)
- [ 0.000000] .data : 0xc12ddec1 - 0xc14283c0 (1321 kB)
- [ 0.000000] .text : 0xc1000000 - 0xc12ddec1 (2935 kB)
- [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
- [ 0.000000] Hierarchical RCU implementation.
- [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
- [ 0.000000] NR_IRQS:2304 nr_irqs:712 16
- [ 0.000000] CPU 0 irqstacks, hard=f7406000 soft=f7408000
- [ 0.000000] spurious 8259A interrupt: IRQ7.
- [ 0.000000] Console: colour VGA+ 80x25
- [ 0.000000] console [tty0] enabled
- [ 0.000000] hpet clockevent registered
- [ 0.000000] Fast TSC calibration using PIT
- [ 0.000000] Detected 1297.282 MHz processor.
- [ 0.004006] Calibrating delay loop (skipped), value calculated using timer frequency.. 2594.56 BogoMIPS (lpj=5189128)
- [ 0.004016] pid_max: default: 32768 minimum: 301
- [ 0.004088] Security Framework initialized
- [ 0.004098] AppArmor: AppArmor disabled by boot time parameter
- [ 0.004129] Mount-cache hash table entries: 512
- [ 0.004345] Initializing cgroup subsys cpuacct
- [ 0.004356] Initializing cgroup subsys memory
- [ 0.004371] Initializing cgroup subsys devices
- [ 0.004376] Initializing cgroup subsys freezer
- [ 0.004381] Initializing cgroup subsys net_cls
- [ 0.004385] Initializing cgroup subsys blkio
- [ 0.004398] Initializing cgroup subsys perf_event
- [ 0.004452] CPU: Physical Processor ID: 0
- [ 0.004456] CPU: Processor Core ID: 0
- [ 0.004462] mce: CPU supports 6 MCE banks
- [ 0.008911] ACPI: Core revision 20110623
- [ 0.020113] Enabling APIC mode: Flat. Using 1 I/O APICs
- [ 0.020540] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
- [ 0.063647] CPU0: AMD E-300 APU with Radeon(tm) HD Graphics stepping 00
- [ 0.064003] Performance Events: AMD PMU driver.
- [ 0.064003] ... version: 0
- [ 0.064003] ... bit width: 48
- [ 0.064003] ... generic registers: 4
- [ 0.064003] ... value mask: 0000ffffffffffff
- [ 0.064003] ... max period: 00007fffffffffff
- [ 0.064003] ... fixed-purpose events: 0
- [ 0.064003] ... event mask: 000000000000000f
- [ 0.064003] NMI watchdog enabled, takes one hw-pmu counter.
- [ 0.064003] CPU 1 irqstacks, hard=f74b2000 soft=f74b4000
- [ 0.064003] Booting Node 0, Processors #1
- [ 0.064003] smpboot cpu 1: start_ip = 9b000
- [ 0.008000] Initializing CPU#1
- [ 0.152045] NMI watchdog enabled, takes one hw-pmu counter.
- [ 0.152091] Brought up 2 CPUs
- [ 0.152097] Total of 2 processors activated (5189.04 BogoMIPS).
- [ 0.152746] devtmpfs: initialized
- [ 0.152746] PM: Registering ACPI NVS region at 66bbf000 (3145728 bytes)
- [ 0.152746] print_constraints: dummy:
- [ 0.152746] NET: Registered protocol family 16
- [ 0.152977] Extended Config Space enabled on 0 nodes
- [ 0.153016] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
- [ 0.153022] ACPI: bus type pci registered
- [ 0.153174] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
- [ 0.153182] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
- [ 0.153187] PCI: Using MMCONFIG for extended config space
- [ 0.153192] PCI: Using configuration type 1 for base access
- [ 0.156146] bio: create slab <bio-0> at 0
- [ 0.156234] ACPI: Added _OSI(Module Device)
- [ 0.156234] ACPI: Added _OSI(Processor Device)
- [ 0.156234] ACPI: Added _OSI(3.0 _SCP Extensions)
- [ 0.156234] ACPI: Added _OSI(Processor Aggregator Device)
- [ 0.160164] ACPI: EC: Look up EC in DSDT
- [ 0.163387] ACPI: Executed 1 blocks of module-level executable AML code
- [ 0.170565] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
- [ 0.228389] ACPI: Interpreter enabled
- [ 0.228411] ACPI: (supports S0 S3 S4 S5)
- [ 0.228460] ACPI: Using IOAPIC for interrupt routing
- [ 0.274000] ACPI: EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62
- [ 0.274403] ACPI: No dock devices found.
- [ 0.274408] HEST: Table not found.
- [ 0.274419] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
- [ 0.274895] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
- [ 0.275264] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
- [ 0.275271] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
- [ 0.275278] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
- [ 0.275285] pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000c3fff]
- [ 0.275291] pci_root PNP0A08:00: host bridge window [mem 0x000c4000-0x000c7fff]
- [ 0.275297] pci_root PNP0A08:00: host bridge window [mem 0x000c8000-0x000cbfff]
- [ 0.275303] pci_root PNP0A08:00: host bridge window [mem 0x000cc000-0x000cffff]
- [ 0.275308] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
- [ 0.275314] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
- [ 0.275320] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
- [ 0.275326] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
- [ 0.275332] pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
- [ 0.275337] pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff]
- [ 0.275343] pci_root PNP0A08:00: host bridge window [mem 0x000e8000-0x000ebfff]
- [ 0.275349] pci_root PNP0A08:00: host bridge window [mem 0x000ec000-0x000effff]
- [ 0.275355] pci_root PNP0A08:00: host bridge window [mem 0x7f000000-0xf7ffffff]
- [ 0.275360] pci_root PNP0A08:00: host bridge window [mem 0xfc000000-0xfed3ffff]
- [ 0.275366] pci_root PNP0A08:00: host bridge window [mem 0xfed45000-0xffffffff]
- [ 0.275385] pci_root PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff] (conflicts with Video ROM [mem 0x000c0000-0x000ce5ff])
- [ 0.275412] pci 0000:00:00.0: [1022:1510] type 0 class 0x000600
- [ 0.275480] pci 0000:00:01.0: [1002:9802] type 0 class 0x000300
- [ 0.275498] pci 0000:00:01.0: reg 10: [mem 0x80000000-0x8fffffff pref]
- [ 0.275511] pci 0000:00:01.0: reg 14: [io 0x4000-0x40ff]
- [ 0.275524] pci 0000:00:01.0: reg 18: [mem 0x90400000-0x9043ffff]
- [ 0.275594] pci 0000:00:01.0: supports D1 D2
- [ 0.275624] pci 0000:00:01.1: [1002:1314] type 0 class 0x000403
- [ 0.275640] pci 0000:00:01.1: reg 10: [mem 0x90444000-0x90447fff]
- [ 0.275722] pci 0000:00:01.1: supports D1 D2
- [ 0.275853] pci 0000:00:11.0: [1002:4391] type 0 class 0x000106
- [ 0.275883] pci 0000:00:11.0: reg 10: [io 0x4118-0x411f]
- [ 0.275899] pci 0000:00:11.0: reg 14: [io 0x4124-0x4127]
- [ 0.275915] pci 0000:00:11.0: reg 18: [io 0x4110-0x4117]
- [ 0.275932] pci 0000:00:11.0: reg 1c: [io 0x4120-0x4123]
- [ 0.275948] pci 0000:00:11.0: reg 20: [io 0x4100-0x410f]
- [ 0.275964] pci 0000:00:11.0: reg 24: [mem 0x9044d000-0x9044d3ff]
- [ 0.276073] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03
- [ 0.276095] pci 0000:00:12.0: reg 10: [mem 0x9044c000-0x9044cfff]
- [ 0.276200] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03
- [ 0.276962] pci 0000:00:12.2: reg 10: [mem 0x9044b000-0x9044b0ff]
- [ 0.280763] pci 0000:00:12.2: supports D1 D2
- [ 0.280775] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
- [ 0.280836] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
- [ 0.280955] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403
- [ 0.280990] pci 0000:00:14.2: reg 10: [mem 0x90440000-0x90443fff 64bit]
- [ 0.281086] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
- [ 0.281113] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601
- [ 0.281225] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
- [ 0.281291] pci 0000:00:14.5: [1002:4399] type 0 class 0x000c03
- [ 0.281313] pci 0000:00:14.5: reg 10: [mem 0x9044a000-0x9044afff]
- [ 0.281421] pci 0000:00:15.0: [1002:43a0] type 1 class 0x000604
- [ 0.281540] pci 0000:00:15.0: supports D1 D2
- [ 0.281583] pci 0000:00:15.1: [1002:43a1] type 1 class 0x000604
- [ 0.281698] pci 0000:00:15.1: supports D1 D2
- [ 0.281741] pci 0000:00:15.3: [1002:43a3] type 1 class 0x000604
- [ 0.281856] pci 0000:00:15.3: supports D1 D2
- [ 0.281897] pci 0000:00:16.0: [1002:4397] type 0 class 0x000c03
- [ 0.281919] pci 0000:00:16.0: reg 10: [mem 0x90449000-0x90449fff]
- [ 0.282025] pci 0000:00:16.2: [1002:4396] type 0 class 0x000c03
- [ 0.282715] pci 0000:00:16.2: reg 10: [mem 0x90448000-0x904480ff]
- [ 0.286635] pci 0000:00:16.2: supports D1 D2
- [ 0.286647] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
- [ 0.286711] pci 0000:00:18.0: [1022:1700] type 0 class 0x000600
- [ 0.286772] pci 0000:00:18.1: [1022:1701] type 0 class 0x000600
- [ 0.286824] pci 0000:00:18.2: [1022:1702] type 0 class 0x000600
- [ 0.286878] pci 0000:00:18.3: [1022:1703] type 0 class 0x000600
- [ 0.286945] pci 0000:00:18.4: [1022:1704] type 0 class 0x000600
- [ 0.286995] pci 0000:00:18.5: [1022:1718] type 0 class 0x000600
- [ 0.287046] pci 0000:00:18.6: [1022:1716] type 0 class 0x000600
- [ 0.287096] pci 0000:00:18.7: [1022:1719] type 0 class 0x000600
- [ 0.287237] pci 0000:00:14.4: PCI bridge to [bus 01-01] (subtractive decode)
- [ 0.287258] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
- [ 0.287265] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
- [ 0.287271] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
- [ 0.287280] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000c3fff] (subtractive decode)
- [ 0.287287] pci 0000:00:14.4: bridge window [mem 0x000c4000-0x000c7fff] (subtractive decode)
- [ 0.287294] pci 0000:00:14.4: bridge window [mem 0x000c8000-0x000cbfff] (subtractive decode)
- [ 0.287300] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
- [ 0.287306] pci 0000:00:14.4: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
- [ 0.287312] pci 0000:00:14.4: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
- [ 0.287319] pci 0000:00:14.4: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
- [ 0.287325] pci 0000:00:14.4: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
- [ 0.287331] pci 0000:00:14.4: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
- [ 0.287337] pci 0000:00:14.4: bridge window [mem 0x000e8000-0x000ebfff] (subtractive decode)
- [ 0.287344] pci 0000:00:14.4: bridge window [mem 0x000ec000-0x000effff] (subtractive decode)
- [ 0.287350] pci 0000:00:14.4: bridge window [mem 0x7f000000-0xf7ffffff] (subtractive decode)
- [ 0.287356] pci 0000:00:14.4: bridge window [mem 0xfc000000-0xfed3ffff] (subtractive decode)
- [ 0.287363] pci 0000:00:14.4: bridge window [mem 0xfed45000-0xffffffff] (subtractive decode)
- [ 0.287513] pci 0000:02:00.0: [10ec:5209] type 0 class 0x00ff00
- [ 0.287542] pci 0000:02:00.0: reg 10: [mem 0x90300000-0x90300fff]
- [ 0.287716] pci 0000:02:00.0: supports D1 D2
- [ 0.287720] pci 0000:02:00.0: PME# supported from D1 D2 D3hot
- [ 0.296118] pci 0000:00:15.0: PCI bridge to [bus 02-05]
- [ 0.296139] pci 0000:00:15.0: bridge window [io 0x3000-0x3fff]
- [ 0.296149] pci 0000:00:15.0: bridge window [mem 0x90300000-0x903fffff]
- [ 0.296161] pci 0000:00:15.0: bridge window [mem 0x90000000-0x900fffff 64bit pref]
- [ 0.296278] pci 0000:06:00.0: [10ec:8136] type 0 class 0x000200
- [ 0.296314] pci 0000:06:00.0: reg 10: [io 0x2000-0x20ff]
- [ 0.296357] pci 0000:06:00.0: reg 18: [mem 0x90104000-0x90104fff 64bit pref]
- [ 0.296386] pci 0000:06:00.0: reg 20: [mem 0x90100000-0x90103fff 64bit pref]
- [ 0.296502] pci 0000:06:00.0: supports D1 D2
- [ 0.296507] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.304117] pci 0000:00:15.1: PCI bridge to [bus 06-06]
- [ 0.304138] pci 0000:00:15.1: bridge window [io 0x2000-0x2fff]
- [ 0.304154] pci 0000:00:15.1: bridge window [mem 0x90100000-0x901fffff 64bit pref]
- [ 0.304281] pci 0000:07:00.0: [168c:002b] type 0 class 0x000280
- [ 0.304322] pci 0000:07:00.0: reg 10: [mem 0x90200000-0x9020ffff 64bit]
- [ 0.304481] pci 0000:07:00.0: supports D1
- [ 0.304486] pci 0000:07:00.0: PME# supported from D0 D1 D3hot
- [ 0.312102] pci 0000:00:15.3: PCI bridge to [bus 07-07]
- [ 0.312130] pci 0000:00:15.3: bridge window [mem 0x90200000-0x902fffff]
- [ 0.312174] pci_bus 0000:00: on NUMA node 0
- [ 0.312190] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
- [ 0.312501] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SPB0._PRT]
- [ 0.312584] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SPB1._PRT]
- [ 0.312668] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SPB3._PRT]
- [ 0.312822] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
- [ 0.313144] pci0000:00: Requesting ACPI _OSC control (0x1d)
- [ 0.313541] pci0000:00: ACPI _OSC control (0x1d) granted
- [ 0.330898] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0
- [ 0.331062] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0
- [ 0.331232] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0
- [ 0.331399] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0
- [ 0.331541] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0
- [ 0.331720] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0
- [ 0.331902] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0
- [ 0.332045] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0
- [ 0.332364] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
- [ 0.332364] vgaarb: loaded
- [ 0.332364] vgaarb: bridge control possible 0000:00:01.0
- [ 0.332364] PCI: Using ACPI for IRQ routing
- [ 0.335070] PCI: pci_cache_line_size set to 64 bytes
- [ 0.335227] reserve RAM buffer: 000000000009f800 - 000000000009ffff
- [ 0.335233] reserve RAM buffer: 0000000066b3f000 - 0000000067ffffff
- [ 0.335240] reserve RAM buffer: 0000000066f00000 - 0000000067ffffff
- [ 0.335509] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
- [ 0.335519] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
- [ 0.337060] Switching to clocksource hpet
- [ 0.339113] pnp: PnP ACPI init
- [ 0.339156] ACPI: bus type pnp registered
- [ 0.339421] pnp 00:00: [bus 00-ff]
- [ 0.339428] pnp 00:00: [io 0x0000-0x0cf7 window]
- [ 0.339434] pnp 00:00: [io 0x0d00-0xffff window]
- [ 0.339440] pnp 00:00: [mem 0x000a0000-0x000bffff window]
- [ 0.339446] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
- [ 0.339451] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
- [ 0.339457] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
- [ 0.339462] pnp 00:00: [mem 0x000cc000-0x000cffff window]
- [ 0.339467] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
- [ 0.339473] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
- [ 0.339478] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
- [ 0.339483] pnp 00:00: [mem 0x000dc000-0x000dffff window]
- [ 0.339488] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
- [ 0.339493] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
- [ 0.339499] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
- [ 0.339504] pnp 00:00: [mem 0x000ec000-0x000effff window]
- [ 0.339509] pnp 00:00: [mem 0x7f000000-0xf7ffffff window]
- [ 0.339515] pnp 00:00: [mem 0xfc000000-0xfed3ffff window]
- [ 0.339520] pnp 00:00: [mem 0xfed45000-0xffffffff window]
- [ 0.339525] pnp 00:00: [io 0x0cf8-0x0cff]
- [ 0.339655] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
- [ 0.339769] pnp 00:01: [mem 0xfec00000-0xfec00fff]
- [ 0.339775] pnp 00:01: [mem 0xfee00000-0xfee00fff]
- [ 0.339885] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
- [ 0.339892] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
- [ 0.339900] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.340228] pnp 00:02: [irq 0 disabled]
- [ 0.340250] pnp 00:02: [irq 8]
- [ 0.340255] pnp 00:02: [mem 0xfed00000-0xfed003ff]
- [ 0.340325] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
- [ 0.340410] pnp 00:03: [io 0x0000-0x000f]
- [ 0.340415] pnp 00:03: [io 0x0081-0x008f]
- [ 0.340420] pnp 00:03: [io 0x00c0-0x00df]
- [ 0.340425] pnp 00:03: [dma 4]
- [ 0.340494] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
- [ 0.340516] pnp 00:04: [io 0x00f0-0x00fe]
- [ 0.340564] pnp 00:04: [irq 13]
- [ 0.340636] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
- [ 0.340750] pnp 00:05: [io 0x0070-0x0071]
- [ 0.340823] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
- [ 0.340844] pnp 00:06: [io 0x0061]
- [ 0.340913] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
- [ 0.340942] pnp 00:07: [io 0x0010-0x001f]
- [ 0.340950] pnp 00:07: [io 0x002e-0x002f]
- [ 0.340955] pnp 00:07: [io 0x0072-0x0073]
- [ 0.340959] pnp 00:07: [io 0x0080]
- [ 0.340963] pnp 00:07: [io 0x00b0-0x00b1]
- [ 0.340968] pnp 00:07: [io 0x0092]
- [ 0.340972] pnp 00:07: [io 0x0400-0x04cf]
- [ 0.340977] pnp 00:07: [io 0x04d0-0x04d1]
- [ 0.340981] pnp 00:07: [io 0x04d6]
- [ 0.340985] pnp 00:07: [io 0x0680-0x06ff]
- [ 0.340989] pnp 00:07: [io 0x077a]
- [ 0.340993] pnp 00:07: [io 0x0c00-0x0c01]
- [ 0.340997] pnp 00:07: [io 0x0c14]
- [ 0.341002] pnp 00:07: [io 0x0c50-0x0c52]
- [ 0.341006] pnp 00:07: [io 0x0c6c]
- [ 0.341010] pnp 00:07: [io 0x0c6f]
- [ 0.341014] pnp 00:07: [io 0x0cd0-0x0cdb]
- [ 0.341140] system 00:07: [io 0x0400-0x04cf] has been reserved
- [ 0.341147] system 00:07: [io 0x04d0-0x04d1] has been reserved
- [ 0.341153] system 00:07: [io 0x04d6] has been reserved
- [ 0.341159] system 00:07: [io 0x0680-0x06ff] has been reserved
- [ 0.341165] system 00:07: [io 0x077a] has been reserved
- [ 0.341172] system 00:07: [io 0x0c00-0x0c01] has been reserved
- [ 0.341178] system 00:07: [io 0x0c14] has been reserved
- [ 0.341184] system 00:07: [io 0x0c50-0x0c52] has been reserved
- [ 0.341190] system 00:07: [io 0x0c6c] has been reserved
- [ 0.341195] system 00:07: [io 0x0c6f] has been reserved
- [ 0.341201] system 00:07: [io 0x0cd0-0x0cdb] has been reserved
- [ 0.341209] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.341308] pnp 00:08: [mem 0x000e0000-0x000fffff]
- [ 0.341314] pnp 00:08: [mem 0xffffffb0-0xfffffffe]
- [ 0.341319] pnp 00:08: [mem 0xffffff00-0xfffffffe]
- [ 0.341324] pnp 00:08: [mem 0xffe00000-0xffffffff]
- [ 0.341438] system 00:08: [mem 0x000e0000-0x000fffff] could not be reserved
- [ 0.341445] system 00:08: [mem 0xffffffb0-0xfffffffe] has been reserved
- [ 0.341452] system 00:08: [mem 0xffffff00-0xfffffffe] could not be reserved
- [ 0.341459] system 00:08: [mem 0xffe00000-0xffffffff] could not be reserved
- [ 0.341466] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
- [ 0.357471] pnp 00:09: [io 0x0060]
- [ 0.357480] pnp 00:09: [io 0x0064]
- [ 0.357569] pnp 00:09: [irq 1]
- [ 0.357766] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 (active)
- [ 0.357826] pnp 00:0a: [irq 12]
- [ 0.357906] pnp 00:0a: Plug and Play ACPI device, IDs SYN1e4b SYN1e00 SYN0002 PNP0f13 (active)
- [ 0.358622] pnp: PnP ACPI: found 11 devices
- [ 0.358627] ACPI: ACPI bus type pnp unregistered
- [ 0.358634] PnPBIOS: Disabled by ACPI PNP
- [ 0.402675] PCI: max bus depth: 1 pci_try_num: 2
- [ 0.402773] pci 0000:00:14.4: PCI bridge to [bus 01-01]
- [ 0.402795] pci 0000:00:15.0: PCI bridge to [bus 02-05]
- [ 0.402804] pci 0000:00:15.0: bridge window [io 0x3000-0x3fff]
- [ 0.402814] pci 0000:00:15.0: bridge window [mem 0x90300000-0x903fffff]
- [ 0.402824] pci 0000:00:15.0: bridge window [mem 0x90000000-0x900fffff 64bit pref]
- [ 0.402836] pci 0000:00:15.1: PCI bridge to [bus 06-06]
- [ 0.402843] pci 0000:00:15.1: bridge window [io 0x2000-0x2fff]
- [ 0.402856] pci 0000:00:15.1: bridge window [mem 0x90100000-0x901fffff 64bit pref]
- [ 0.402868] pci 0000:00:15.3: PCI bridge to [bus 07-07]
- [ 0.402877] pci 0000:00:15.3: bridge window [mem 0x90200000-0x902fffff]
- [ 0.402937] pci 0000:00:15.0: setting latency timer to 64
- [ 0.402952] pci 0000:00:15.1: setting latency timer to 64
- [ 0.402967] pci 0000:00:15.3: setting latency timer to 64
- [ 0.402976] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
- [ 0.402982] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
- [ 0.402988] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
- [ 0.402993] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
- [ 0.402999] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
- [ 0.403005] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
- [ 0.403010] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff]
- [ 0.403016] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff]
- [ 0.403021] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff]
- [ 0.403027] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff]
- [ 0.403032] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff]
- [ 0.403038] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff]
- [ 0.403043] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff]
- [ 0.403049] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff]
- [ 0.403054] pci_bus 0000:00: resource 18 [mem 0x7f000000-0xf7ffffff]
- [ 0.403060] pci_bus 0000:00: resource 19 [mem 0xfc000000-0xfed3ffff]
- [ 0.403066] pci_bus 0000:00: resource 20 [mem 0xfed45000-0xffffffff]
- [ 0.403072] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7]
- [ 0.403077] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff]
- [ 0.403083] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
- [ 0.403088] pci_bus 0000:01: resource 7 [mem 0x000c0000-0x000c3fff]
- [ 0.403094] pci_bus 0000:01: resource 8 [mem 0x000c4000-0x000c7fff]
- [ 0.403099] pci_bus 0000:01: resource 9 [mem 0x000c8000-0x000cbfff]
- [ 0.403105] pci_bus 0000:01: resource 10 [mem 0x000d0000-0x000d3fff]
- [ 0.403111] pci_bus 0000:01: resource 11 [mem 0x000d4000-0x000d7fff]
- [ 0.403116] pci_bus 0000:01: resource 12 [mem 0x000d8000-0x000dbfff]
- [ 0.403122] pci_bus 0000:01: resource 13 [mem 0x000dc000-0x000dffff]
- [ 0.403127] pci_bus 0000:01: resource 14 [mem 0x000e0000-0x000e3fff]
- [ 0.403133] pci_bus 0000:01: resource 15 [mem 0x000e4000-0x000e7fff]
- [ 0.403138] pci_bus 0000:01: resource 16 [mem 0x000e8000-0x000ebfff]
- [ 0.403144] pci_bus 0000:01: resource 17 [mem 0x000ec000-0x000effff]
- [ 0.403149] pci_bus 0000:01: resource 18 [mem 0x7f000000-0xf7ffffff]
- [ 0.403155] pci_bus 0000:01: resource 19 [mem 0xfc000000-0xfed3ffff]
- [ 0.403161] pci_bus 0000:01: resource 20 [mem 0xfed45000-0xffffffff]
- [ 0.403167] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
- [ 0.403172] pci_bus 0000:02: resource 1 [mem 0x90300000-0x903fffff]
- [ 0.403178] pci_bus 0000:02: resource 2 [mem 0x90000000-0x900fffff 64bit pref]
- [ 0.403184] pci_bus 0000:06: resource 0 [io 0x2000-0x2fff]
- [ 0.403190] pci_bus 0000:06: resource 2 [mem 0x90100000-0x901fffff 64bit pref]
- [ 0.403196] pci_bus 0000:07: resource 1 [mem 0x90200000-0x902fffff]
- [ 0.403394] NET: Registered protocol family 2
- [ 0.403610] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
- [ 0.404145] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
- [ 0.404886] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
- [ 0.405260] TCP: Hash tables configured (established 131072 bind 65536)
- [ 0.405267] TCP reno registered
- [ 0.405275] UDP hash table entries: 512 (order: 2, 16384 bytes)
- [ 0.405293] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
- [ 0.405548] NET: Registered protocol family 1
- [ 0.405581] pci 0000:00:01.0: Boot video device
- [ 0.652363] PCI: CLS 64 bytes, default 64
- [ 0.652501] Unpacking initramfs...
- [ 1.537723] Freeing initrd memory: 15440k freed
- [ 1.549209] Simple Boot Flag at 0x44 set to 0x1
- [ 1.550112] perf: AMD IBS detected (0x000000ff)
- [ 1.550858] audit: initializing netlink socket (disabled)
- [ 1.550887] type=2000 audit(1376686602.548:1): initialized
- [ 1.592221] highmem bounce pool size: 64 pages
- [ 1.592235] HugeTLB registered 2 MB page size, pre-allocated 0 pages
- [ 1.593539] VFS: Disk quotas dquot_6.5.2
- [ 1.593654] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- [ 1.593894] msgmni has been set to 1740
- [ 1.594536] alg: No test for stdrng (krng)
- [ 1.594630] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
- [ 1.594641] io scheduler noop registered
- [ 1.594645] io scheduler deadline registered
- [ 1.594715] io scheduler cfq registered (default)
- [ 1.594970] pcieport 0000:00:15.0: setting latency timer to 64
- [ 1.595062] pcieport 0000:00:15.0: irq 40 for MSI/MSI-X
- [ 1.595232] pcieport 0000:00:15.1: setting latency timer to 64
- [ 1.595307] pcieport 0000:00:15.1: irq 41 for MSI/MSI-X
- [ 1.595423] pcieport 0000:00:15.3: setting latency timer to 64
- [ 1.595497] pcieport 0000:00:15.3: irq 42 for MSI/MSI-X
- [ 1.595708] pcieport 0000:00:15.0: Signaling PME through PCIe PME interrupt
- [ 1.595715] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
- [ 1.595724] pcie_pme 0000:00:15.0:pcie01: service driver pcie_pme loaded
- [ 1.595761] pcieport 0000:00:15.1: Signaling PME through PCIe PME interrupt
- [ 1.595766] pci 0000:06:00.0: Signaling PME through PCIe PME interrupt
- [ 1.595775] pcie_pme 0000:00:15.1:pcie01: service driver pcie_pme loaded
- [ 1.595812] pcieport 0000:00:15.3: Signaling PME through PCIe PME interrupt
- [ 1.595817] pci 0000:07:00.0: Signaling PME through PCIe PME interrupt
- [ 1.595826] pcie_pme 0000:00:15.3:pcie01: service driver pcie_pme loaded
- [ 1.595865] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
- [ 1.595911] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
- [ 1.595916] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
- [ 1.596774] ERST: Table is not found!
- [ 1.596778] GHES: HEST is not enabled!
- [ 1.596806] isapnp: Scanning for PnP cards...
- [ 2.011870] isapnp: No Plug & Play device found
- [ 2.012225] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
- [ 2.021453] Linux agpgart interface v0.103
- [ 2.021887] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
- [ 2.033714] serio: i8042 KBD port at 0x60,0x64 irq 1
- [ 2.033732] serio: i8042 AUX port at 0x60,0x64 irq 12
- [ 2.034412] mousedev: PS/2 mouse device common for all mice
- [ 2.034573] rtc_cmos 00:05: RTC can wake from S4
- [ 2.034896] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
- [ 2.034975] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
- [ 2.035000] cpuidle: using governor ladder
- [ 2.035005] cpuidle: using governor menu
- [ 2.035525] TCP cubic registered
- [ 2.035720] NET: Registered protocol family 10
- [ 2.036874] Mobile IPv6
- [ 2.036881] NET: Registered protocol family 17
- [ 2.036891] Registering the dns_resolver key type
- [ 2.036938] Using IPI No-Shortcut mode
- [ 2.037542] PM: Hibernation image not present or could not be loaded.
- [ 2.037578] registered taskstats version 1
- [ 2.038569] rtc_cmos 00:05: setting system clock to 2013-08-16 20:56:43 UTC (1376686603)
- [ 2.038748] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
- [ 2.039328] Initializing network drop monitor service
- [ 2.039578] Freeing unused kernel memory: 444k freed
- [ 2.040146] Write protecting the kernel text: 2936k
- [ 2.040249] Write protecting the kernel read-only data: 1060k
- [ 2.040253] NX-protecting the kernel data: 3208k
- [ 2.088277] udev[52]: starting version 164
- [ 2.171625] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
- [ 2.205484] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
- [ 2.205655] r8169 0000:06:00.0: setting latency timer to 64
- [ 2.205734] r8169 0000:06:00.0: irq 43 for MSI/MSI-X
- [ 2.206798] r8169 0000:06:00.0: eth0: RTL8105e at 0xf83c0000, 10:1f:74:53:83:2e, XID 00a00000 IRQ 43
- [ 2.207588] usbcore: registered new interface driver usbfs
- [ 2.207642] usbcore: registered new interface driver hub
- [ 2.207788] ACPI: Lid Switch [LID]
- [ 2.207965] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
- [ 2.207976] ACPI: Power Button [PWRB]
- [ 2.208224] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
- [ 2.208232] ACPI: Power Button [PWRF]
- [ 2.220508] usbcore: registered new device driver usb
- [ 2.222709] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 2.222836] ehci_hcd 0000:00:12.2: EHCI Host Controller
- [ 2.222891] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
- [ 2.222946] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
- [ 2.224457] SCSI subsystem initialized
- [ 2.229530] QUIRK: Enable AMD PLL fix
- [ 2.229598] ehci_hcd 0000:00:12.2: debug port 1
- [ 2.229648] ehci_hcd 0000:00:12.2: irq 17, io mem 0x9044b000
- [ 2.239376] acpi device:00: registered as cooling_device0
- [ 2.239584] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4
- [ 2.239598] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
- [ 2.240211] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
- [ 2.240292] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- [ 2.240299] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 2.240304] usb usb1: Product: EHCI Host Controller
- [ 2.240309] usb usb1: Manufacturer: Linux 3.2.0-0.bpo.4-686-pae ehci_hcd
- [ 2.240314] usb usb1: SerialNumber: 0000:00:12.2
- [ 2.240580] hub 1-0:1.0: USB hub found
- [ 2.240591] hub 1-0:1.0: 5 ports detected
- [ 2.240869] ehci_hcd 0000:00:16.2: EHCI Host Controller
- [ 2.240896] ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 2
- [ 2.240958] ehci_hcd 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
- [ 2.241004] ehci_hcd 0000:00:16.2: debug port 1
- [ 2.241029] ehci_hcd 0000:00:16.2: irq 17, io mem 0x90448000
- [ 2.252150] ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00
- [ 2.252230] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
- [ 2.252237] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 2.252243] usb usb2: Product: EHCI Host Controller
- [ 2.252248] usb usb2: Manufacturer: Linux 3.2.0-0.bpo.4-686-pae ehci_hcd
- [ 2.252253] usb usb2: SerialNumber: 0000:00:16.2
- [ 2.252529] hub 2-0:1.0: USB hub found
- [ 2.252539] hub 2-0:1.0: 4 ports detected
- [ 2.253712] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 2.253860] ohci_hcd 0000:00:12.0: OHCI Host Controller
- [ 2.253885] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
- [ 2.253984] ohci_hcd 0000:00:12.0: irq 18, io mem 0x9044c000
- [ 2.273173] [drm] Initialized drm 1.1.0 20060810
- [ 2.277440] libata version 3.00 loaded.
- [ 2.279877] thermal LNXTHERM:00: registered as thermal_zone0
- [ 2.279885] ACPI: Thermal Zone [TSZ0] (55 C)
- [ 2.316097] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
- [ 2.316107] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 2.316113] usb usb3: Product: OHCI Host Controller
- [ 2.316118] usb usb3: Manufacturer: Linux 3.2.0-0.bpo.4-686-pae ohci_hcd
- [ 2.316124] usb usb3: SerialNumber: 0000:00:12.0
- [ 2.316414] hub 3-0:1.0: USB hub found
- [ 2.316465] hub 3-0:1.0: 5 ports detected
- [ 2.316678] ahci 0000:00:11.0: version 3.0
- [ 2.316871] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
- [ 2.316880] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
- [ 2.318142] [drm] radeon kernel modesetting enabled.
- [ 2.318218] scsi0 : ahci
- [ 2.324679] scsi1 : ahci
- [ 2.325333] ata1: SATA max UDMA/133 abar m1024@0x9044d000 port 0x9044d100 irq 19
- [ 2.325342] ata2: SATA max UDMA/133 abar m1024@0x9044d000 port 0x9044d180 irq 19
- [ 2.325634] ohci_hcd 0000:00:14.5: OHCI Host Controller
- [ 2.325669] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 4
- [ 2.325712] ohci_hcd 0000:00:14.5: irq 18, io mem 0x9044a000
- [ 2.384375] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
- [ 2.384385] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 2.384391] usb usb4: Product: OHCI Host Controller
- [ 2.384396] usb usb4: Manufacturer: Linux 3.2.0-0.bpo.4-686-pae ohci_hcd
- [ 2.384401] usb usb4: SerialNumber: 0000:00:14.5
- [ 2.384876] hub 4-0:1.0: USB hub found
- [ 2.384895] hub 4-0:1.0: 2 ports detected
- [ 2.385753] radeon 0000:00:01.0: setting latency timer to 64
- [ 2.385773] [drm] initializing kernel modesetting (PALM 0x1002:0x9802 0x103C:0x3577).
- [ 2.385873] [drm] register mmio base: 0x90400000
- [ 2.385877] [drm] register mmio size: 262144
- [ 2.392255] ATOM BIOS: HP
- [ 2.392297] radeon 0000:00:01.0: VRAM: 384M 0x0000000000000000 - 0x0000000017FFFFFF (384M used)
- [ 2.392305] radeon 0000:00:01.0: GTT: 512M 0x0000000018000000 - 0x0000000037FFFFFF
- [ 2.392629] [drm] Detected VRAM RAM=384M, BAR=256M
- [ 2.392637] [drm] RAM width 32bits DDR
- [ 2.392901] [TTM] Zone kernel: Available graphics memory: 445888 kiB
- [ 2.392909] [TTM] Zone highmem: Available graphics memory: 831576 kiB
- [ 2.392914] [TTM] Initializing pool allocator
- [ 2.392925] [TTM] Initializing DMA pool allocator
- [ 2.392985] [drm] radeon: 384M of VRAM memory ready
- [ 2.392990] [drm] radeon: 512M of GTT memory ready.
- [ 2.393026] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
- [ 2.393031] [drm] Driver supports precise vblank timestamp query.
- [ 2.393098] radeon 0000:00:01.0: irq 44 for MSI/MSI-X
- [ 2.393108] radeon 0000:00:01.0: radeon: using MSI.
- [ 2.393158] [drm] radeon: irq initialized.
- [ 2.393169] [drm] GART: num cpu pages 131072, num gpu pages 131072
- [ 2.394856] [drm] radeon: ib pool ready.
- [ 2.395054] [drm] Loading PALM Microcode
- [ 2.402101] platform radeon_cp.0: firmware: agent loaded radeon/PALM_pfp.bin into memory
- [ 2.409462] platform radeon_cp.0: firmware: agent loaded radeon/PALM_me.bin into memory
- [ 2.416848] platform radeon_cp.0: firmware: agent loaded radeon/SUMO_rlc.bin into memory
- [ 2.548152] Refined TSC clocksource calibration: 1297.237 MHz.
- [ 2.548168] Switching to clocksource tsc
- [ 2.626001] usb 1-3: new high-speed USB device number 2 using ehci_hcd
- [ 2.628983] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
- [ 2.629182] radeon 0000:00:01.0: WB enabled
- [ 2.629190] [drm] fence driver on ring 0 use gpu addr 0x18000c00 and cpu addr 0xffa8ac00
- [ 2.645709] [drm] ring test on 0 succeeded in 1 usecs
- [ 2.645919] [drm] ib test on ring 0 succeeded in 0 usecs
- [ 2.646799] [drm] Radeon Display Connectors
- [ 2.646804] [drm] Connector 0:
- [ 2.646807] [drm] LVDS
- [ 2.646810] [drm] HPD1
- [ 2.646816] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
- [ 2.646820] [drm] Encoders:
- [ 2.646824] [drm] LCD1: INTERNAL_UNIPHY
- [ 2.646827] [drm] Connector 1:
- [ 2.646830] [drm] HDMI-A
- [ 2.646833] [drm] HPD2
- [ 2.646838] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
- [ 2.646842] [drm] Encoders:
- [ 2.646845] [drm] DFP1: INTERNAL_UNIPHY
- [ 2.646848] [drm] Connector 2:
- [ 2.646851] [drm] VGA
- [ 2.646856] [drm] DDC: 0x64d8 0x64d8 0x64dc 0x64dc 0x64e0 0x64e0 0x64e4 0x64e4
- [ 2.646860] [drm] Encoders:
- [ 2.646863] [drm] CRT1: INTERNAL_KLDSCP_DAC1
- [ 2.646929] [drm] Internal thermal controller without fan control
- [ 2.647029] [drm] radeon: power management initialized
- [ 2.758504] usb 1-3: New USB device found, idVendor=05e3, idProduct=0610
- [ 2.758519] usb 1-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
- [ 2.758529] usb 1-3: Product: USB2.0 Hub
- [ 2.760243] hub 1-3:1.0: USB hub found
- [ 2.761583] hub 1-3:1.0: 4 ports detected
- [ 2.820303] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
- [ 2.820354] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- [ 2.822207] ata1.00: ATA-8: Hitachi HTS543232A7A384, ES2OA60W, max UDMA/100
- [ 2.822222] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
- [ 2.822281] ata2.00: ATAPI: hp DVD RW AD-7711H, 1.82, max UDMA/100
- [ 2.824045] ata1.00: configured for UDMA/100
- [ 2.824484] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54323 ES2O PQ: 0 ANSI: 5
- [ 2.824553] ata2.00: configured for UDMA/100
- [ 2.828228] scsi 1:0:0:0: CD-ROM hp DVD RW AD-7711H 1.82 PQ: 0 ANSI: 5
- [ 2.837031] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
- [ 2.837172] sd 0:0:0:0: [sda] Write Protect is off
- [ 2.837180] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
- [ 2.837287] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 2.838465] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
- [ 2.838480] cdrom: Uniform CD-ROM driver Revision: 3.20
- [ 2.838784] sr 1:0:0:0: Attached scsi CD-ROM sr0
- [ 2.872317] usb 2-2: new high-speed USB device number 2 using ehci_hcd
- [ 2.881477] sda: sda1 sda2 sda3
- [ 2.883114] sd 0:0:0:0: [sda] Attached SCSI disk
- [ 2.891401] sd 0:0:0:0: Attached scsi generic sg0 type 0
- [ 2.892439] sr 1:0:0:0: Attached scsi generic sg1 type 5
- [ 3.064918] usb 2-2: New USB device found, idVendor=04f2, idProduct=b293
- [ 3.064927] usb 2-2: New USB device strings: Mfr=2, Product=1, SerialNumber=3
- [ 3.064933] usb 2-2: Product: HP Webcam-101
- [ 3.064938] usb 2-2: Manufacturer: Chicony Electronics Co., Ltd.
- [ 3.064942] usb 2-2: SerialNumber: SN0001
- [ 3.098162] [drm] fb mappable at 0x80142000
- [ 3.098169] [drm] vram apper at 0x80000000
- [ 3.098173] [drm] size 5324800
- [ 3.098177] [drm] fb depth is 24
- [ 3.098180] [drm] pitch is 5888
- [ 3.098411] fbcon: radeondrmfb (fb0) is primary device
- [ 3.208276] usb 4-2: new full-speed USB device number 2 using ohci_hcd
- [ 3.369529] usb 4-2: New USB device found, idVendor=03f0, idProduct=311d
- [ 3.369541] usb 4-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 3.445020] usb 1-3.1: new high-speed USB device number 3 using ehci_hcd
- [ 3.538401] usb 1-3.1: New USB device found, idVendor=05e3, idProduct=0610
- [ 3.538414] usb 1-3.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
- [ 3.538422] usb 1-3.1: Product: USB2.0 Hub
- [ 3.540180] hub 1-3.1:1.0: USB hub found
- [ 3.541337] hub 1-3.1:1.0: 4 ports detected
- [ 3.617122] usb 1-3.4: new low-speed USB device number 4 using ehci_hcd
- [ 3.673280] Console: switching to colour frame buffer device 170x48
- [ 3.681310] fb0: radeondrmfb frame buffer device
- [ 3.681315] drm: registered panic notifier
- [ 3.681328] [drm] Initialized radeon 2.16.0 20080528 for 0000:00:01.0 on minor 0
- [ 3.681568] ohci_hcd 0000:00:16.0: OHCI Host Controller
- [ 3.681617] ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 5
- [ 3.681702] ohci_hcd 0000:00:16.0: irq 18, io mem 0x90449000
- [ 3.721255] usb 1-3.4: New USB device found, idVendor=046d, idProduct=c05b
- [ 3.721270] usb 1-3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 3.721280] usb 1-3.4: Product: USB Optical Mouse
- [ 3.721288] usb 1-3.4: Manufacturer: Logitech
- [ 3.733791] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3.4/1-3.4:1.0/input/input5
- [ 3.733977] generic-usb 0003:046D:C05B.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:12.2-3.4/input0
- [ 3.734020] usbcore: registered new interface driver usbhid
- [ 3.734025] usbhid: USB HID core driver
- [ 3.740188] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
- [ 3.740198] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 3.740204] usb usb5: Product: OHCI Host Controller
- [ 3.740209] usb usb5: Manufacturer: Linux 3.2.0-0.bpo.4-686-pae ohci_hcd
- [ 3.740214] usb usb5: SerialNumber: 0000:00:16.0
- [ 3.740699] hub 5-0:1.0: USB hub found
- [ 3.740770] hub 5-0:1.0: 4 ports detected
- [ 3.813728] usb 1-3.1.1: new low-speed USB device number 5 using ehci_hcd
- [ 3.909778] usb 1-3.1.1: New USB device found, idVendor=04f3, idProduct=0103
- [ 3.909794] usb 1-3.1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 3.915399] input: HID 04f3:0103 as /devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3.1/1-3.1.1/1-3.1.1:1.0/input/input6
- [ 3.915568] generic-usb 0003:04F3:0103.0002: input,hidraw1: USB HID v1.11 Keyboard [HID 04f3:0103] on usb-0000:00:12.2-3.1.1/input0
- [ 3.919508] input: HID 04f3:0103 as /devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3.1/1-3.1.1/1-3.1.1:1.1/input/input7
- [ 3.919797] generic-usb 0003:04F3:0103.0003: input,hidraw2: USB HID v1.11 Device [HID 04f3:0103] on usb-0000:00:12.2-3.1.1/input1
- [ 3.973649] microcode: CPU0: patch_level=0x05000101
- [ 3.980207] platform microcode: firmware: agent loaded amd-ucode/microcode_amd.bin into memory
- [ 3.984049] microcode: CPU0: new patch_level=0x0500010d
- [ 3.988090] microcode: CPU1: patch_level=0x05000101
- [ 3.995128] platform microcode: firmware: agent loaded amd-ucode/microcode_amd.bin into memory
- [ 3.999020] microcode: CPU1: new patch_level=0x0500010d
- [ 4.003169] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
- [ 4.441090] PM: Starting manual resume from disk
- [ 4.441101] PM: Hibernation image partition 8:2 present
- [ 4.441105] PM: Looking for hibernation image.
- [ 4.448266] PM: Image not found (code -22)
- [ 4.448274] PM: Hibernation image not present or could not be loaded.
- [ 4.468728] EXT4-fs (sda1): INFO: recovery required on readonly filesystem
- [ 4.468738] EXT4-fs (sda1): write access will be enabled during recovery
- [ 5.418767] EXT4-fs (sda1): orphan cleanup on readonly fs
- [ 5.418787] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 307
- [ 5.418905] EXT4-fs (sda1): 1 orphan inode deleted
- [ 5.418911] EXT4-fs (sda1): recovery complete
- [ 5.594245] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
- [ 7.223201] udev[364]: starting version 164
- [ 7.770868] ACPI: acpi_idle registered with cpuidle
- [ 7.797182] ACPI: Battery Slot [BAT0] (battery absent)
- [ 7.842163] ACPI: AC Adapter [AC] (on-line)
- [ 7.893331] cfg80211: Calling CRDA to update world regulatory domain
- [ 8.014452] wmi: Mapper loaded
- [ 8.105040] udev[399]: renamed network interface eth0 to eth2
- [ 8.181427] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
- [ 8.211029] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
- [ 8.211226] SP5100 TCO timer: mmio address 0xb80430 already in use
- [ 8.249413] powernow-k8: Found 1 AMD E-300 APU with Radeon(tm) HD Graphics (2 cpu cores) (version 2.20.00)
- [ 8.249502] powernow-k8: 0 : pstate 0 (1300 MHz)
- [ 8.249507] powernow-k8: 1 : pstate 1 (1114 MHz)
- [ 8.249512] powernow-k8: 2 : pstate 2 (780 MHz)
- [ 8.290413] rts_pstor: module is from the staging directory, the quality is unknown, you have been warned.
- [ 8.293659] Initializing Realtek PCIE storage driver...
- [ 8.293998] Resource length: 0x1000
- [ 8.294041] Original address: 0x90300000, remapped address: 0xf826e000
- [ 8.294058] pci->irq = 20
- [ 8.294066] rtsx_acquire_irq: chip->msi_en = 0, pci->irq = 20
- [ 8.294198] rts_pstor 0000:02:00.0: setting latency timer to 64
- [ 8.503494] scsi2 : SCSI emulation for PCI-Express Mass Storage devices
- [ 8.506894] rts_pstor: waiting for device to settle before scanning
- [ 8.555511] input: HP WMI hotkeys as /devices/virtual/input/input8
- [ 8.583886] ACPI Error: Field [B128] at 1152 exceeds Buffer [NULL] size 160 (bits) (20110623/dsopcode-236)
- [ 8.583916] ACPI Error: Method parse/execution failed [\_SB_.WMID.HWCD] (Node f744d8c0), AE_AML_BUFFER_LIMIT (20110623/psparse-536)
- [ 8.583953] ACPI Error: Method parse/execution failed [\_SB_.WMID.WMAD] (Node f744f770), AE_AML_BUFFER_LIMIT (20110623/psparse-536)
- [ 8.587640] ACPI Error: Field [B128] at 1152 exceeds Buffer [NULL] size 160 (bits) (20110623/dsopcode-236)
- [ 8.587669] ACPI Error: Method parse/execution failed [\_SB_.WMID.HWCD] (Node f744d8c0), AE_AML_BUFFER_LIMIT (20110623/psparse-536)
- [ 8.587711] ACPI Error: Method parse/execution failed [\_SB_.WMID.WMAD] (Node f744f770), AE_AML_BUFFER_LIMIT (20110623/psparse-536)
- [ 8.805371] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd00073/0x240000/0xa0400
- [ 8.814115] ath9k 0000:07:00.0: setting latency timer to 64
- [ 8.864420] ath: EEPROM regdomain: 0x60
- [ 8.864428] ath: EEPROM indicates we should expect a direct regpair map
- [ 8.864440] ath: Country alpha2 being used: 00
- [ 8.864446] ath: Regpair used: 0x60
- [ 8.907176] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input9
- [ 8.918133] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
- [ 8.920076] Registered led device: ath9k-phy0
- [ 8.920103] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xf85e0000, irq=23
- [ 9.290991] Linux media interface: v0.10
- [ 9.331227] Linux video capture interface: v2.00
- [ 9.401776] Bluetooth: Core ver 2.16
- [ 9.401838] NET: Registered protocol family 31
- [ 9.401847] Bluetooth: HCI device and connection manager initialized
- [ 9.401858] Bluetooth: HCI socket layer initialized
- [ 9.401866] Bluetooth: L2CAP socket layer initialized
- [ 9.401894] Bluetooth: SCO socket layer initialized
- [ 9.416246] Bluetooth: Generic Bluetooth USB driver ver 0.6
- [ 9.416873] usbcore: registered new interface driver btusb
- [ 9.425976] Bluetooth: Atheros AR30xx firmware driver ver 1.0
- [ 9.502381] uvcvideo: Found UVC 1.00 device HP Webcam-101 (04f2:b293)
- [ 9.504531] rts_pstor: device scan complete
- [ 9.505047] scsi 2:0:0:0: Direct-Access Generic- xD/SD/M.S. 1.00 PQ: 0 ANSI: 0 CCS
- [ 9.505324] Bad LUN (0:1)
- [ 9.505741] Bad target number (1:0)
- [ 9.505932] Bad target number (2:0)
- [ 9.506262] Bad target number (3:0)
- [ 9.506434] Bad target number (4:0)
- [ 9.506604] Bad target number (5:0)
- [ 9.506766] Bad target number (6:0)
- [ 9.506927] Bad target number (7:0)
- [ 9.507935] sd 2:0:0:0: [sdb] Attached SCSI removable disk
- [ 9.508204] sd 2:0:0:0: Attached scsi generic sg2 type 0
- [ 9.520724] input: HP Webcam-101 as /devices/pci0000:00/0000:00:16.2/usb2/2-2/2-2:1.0/input/input10
- [ 9.520989] usbcore: registered new interface driver uvcvideo
- [ 9.520997] USB Video Class driver (1.1.1)
- [ 9.555126] usb 4-2: firmware: agent aborted loading ath3k-1.fw (not found?)
- [ 9.555354] Bluetooth: Error loading firmware
- [ 9.555383] ath3k: probe of 4-2:1.0 failed with error -5
- [ 9.555479] usbcore: registered new interface driver ath3k
- [ 9.791331] snd_hda_intel 0000:00:01.1: irq 45 for MSI/MSI-X
- [ 9.791394] snd_hda_intel 0000:00:01.1: setting latency timer to 64
- [ 9.893163] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0
- [ 9.893531] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input11
- [ 9.979212] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input12
- [ 9.982350] input: HDA ATI SB Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input13
- [ 9.982656] input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input14
- [ 10.695947] Adding 3071996k swap on /dev/sda2. Priority:-1 extents:1 across:3071996k
- [ 10.707964] EXT4-fs (sda1): re-mounted. Opts: (null)
- [ 11.073441] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
- [ 11.284247] loop: module loaded
- [ 13.741668] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
- [ 14.376249] fuse init (API version 7.17)
- [ 15.527539] vboxdrv: Found 2 processor cores.
- [ 15.527708] vboxdrv: fAsync=0 offMin=0x459 offMax=0xff3
- [ 15.527824] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
- [ 15.527830] vboxdrv: Successfully loaded version 4.0.10_Debian (interface 0x00180000).
- [ 16.120257] vboxguest: VirtualBox Guest PCI device not found.
- [ 17.602050] r8169 0000:06:00.0: firmware: agent loaded rtl_nic/rtl8105e-1.fw into memory
- [ 17.791249] r8169 0000:06:00.0: eth2: link down
- [ 17.791271] r8169 0000:06:00.0: eth2: link down
- [ 17.791766] ADDRCONF(NETDEV_UP): eth2: link is not ready
- [ 19.421446] r8169 0000:06:00.0: eth2: link up
- [ 19.421897] ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
- [ 21.688609] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- [ 21.688621] Bluetooth: BNEP filters: protocol multicast
- [ 21.700958] Bluetooth: RFCOMM TTY layer initialized
- [ 21.700975] Bluetooth: RFCOMM socket layer initialized
- [ 21.700983] Bluetooth: RFCOMM ver 1.11
- [ 21.757052] Bridge firewalling registered
- [ 22.352537] sshd (1574): /proc/1574/oom_adj is deprecated, please use /proc/1574/oom_score_adj instead.
- [ 22.433162] lp: driver loaded but no devices found
- [ 22.546267] ppdev: user-space parallel port driver
- [ 25.104782] snd_hda_intel 0000:00:01.1: irq 45 for MSI/MSI-X
- [ 25.104828] snd_hda_intel 0000:00:01.1: setting latency timer to 64
- [ 25.124869] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0
- [ 25.127303] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input15
- [ 25.174037] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input16
- [ 25.182562] input: HDA ATI SB Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input17
- [ 25.184613] input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input18
- [ 30.264229] eth2: no IPv6 routers present
- [ 242.117425] usb 1-3.1.4: new high-speed USB device number 6 using ehci_hcd
- [ 242.210592] usb 1-3.1.4: New USB device found, idVendor=1058, idProduct=1021
- [ 242.210607] usb 1-3.1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- [ 242.210617] usb 1-3.1.4: Product: Ext HDD 1021
- [ 242.210625] usb 1-3.1.4: Manufacturer: Western Digital
- [ 242.210633] usb 1-3.1.4: SerialNumber: 5743415A4131343230303138
- [ 242.309975] Initializing USB Mass Storage driver...
- [ 242.310698] scsi3 : usb-storage 1-3.1.4:1.0
- [ 242.310996] usbcore: registered new interface driver usb-storage
- [ 242.311005] USB Mass Storage support registered.
- [ 243.310582] scsi 3:0:0:0: Direct-Access WD Ext HDD 1021 2002 PQ: 0 ANSI: 4
- [ 243.314818] sd 3:0:0:0: Attached scsi generic sg3 type 0
- [ 243.316700] sd 3:0:0:0: [sdc] 2930272256 512-byte logical blocks: (1.50 TB/1.36 TiB)
- [ 243.317660] sd 3:0:0:0: [sdc] Test WP failed, assume Write Enabled
- [ 243.318644] sd 3:0:0:0: [sdc] Asking for cache data failed
- [ 243.318657] sd 3:0:0:0: [sdc] Assuming drive cache: write through
- [ 243.326294] sd 3:0:0:0: [sdc] Test WP failed, assume Write Enabled
- [ 243.328648] sd 3:0:0:0: [sdc] Asking for cache data failed
- [ 243.328660] sd 3:0:0:0: [sdc] Assuming drive cache: write through
- [ 243.347605] sdc: sdc1
- [ 243.351399] sd 3:0:0:0: [sdc] Test WP failed, assume Write Enabled
- [ 243.352399] sd 3:0:0:0: [sdc] Asking for cache data failed
- [ 243.352412] sd 3:0:0:0: [sdc] Assuming drive cache: write through
- [ 243.352423] sd 3:0:0:0: [sdc] Attached SCSI disk
- [ 247.776624] kjournald starting. Commit interval 5 seconds
- [ 247.777960] EXT3-fs (sdc1): warning: maximal mount count reached, running e2fsck is recommended
- [ 247.782138] EXT3-fs (sdc1): using internal journal
- [ 247.782156] EXT3-fs (sdc1): recovery complete
- [ 247.783965] EXT3-fs (sdc1): mounted filesystem with ordered data mode
- [ 981.683494] usb 1-3.1.4: USB disconnect, device number 6
- [ 994.425067] usb 1-3.1.4: new high-speed USB device number 7 using ehci_hcd
- [ 994.518813] usb 1-3.1.4: New USB device found, idVendor=1058, idProduct=1021
- [ 994.518829] usb 1-3.1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- [ 994.518839] usb 1-3.1.4: Product: Ext HDD 1021
- [ 994.518847] usb 1-3.1.4: Manufacturer: Western Digital
- [ 994.518854] usb 1-3.1.4: SerialNumber: 5743415A4131343230303138
- [ 994.520894] scsi4 : usb-storage 1-3.1.4:1.0
- [ 995.522320] scsi 4:0:0:0: Direct-Access WD Ext HDD 1021 2002 PQ: 0 ANSI: 4
- [ 995.525959] sd 4:0:0:0: Attached scsi generic sg3 type 0
- [ 995.528383] sd 4:0:0:0: [sdc] 2930272256 512-byte logical blocks: (1.50 TB/1.36 TiB)
- [ 995.529439] sd 4:0:0:0: [sdc] Test WP failed, assume Write Enabled
- [ 995.530434] sd 4:0:0:0: [sdc] Asking for cache data failed
- [ 995.530445] sd 4:0:0:0: [sdc] Assuming drive cache: write through
- [ 995.533812] sd 4:0:0:0: [sdc] Test WP failed, assume Write Enabled
- [ 995.537726] sd 4:0:0:0: [sdc] Asking for cache data failed
- [ 995.537741] sd 4:0:0:0: [sdc] Assuming drive cache: write through
- [ 995.568193] sdc: sdc1
- [ 995.574214] sd 4:0:0:0: [sdc] Test WP failed, assume Write Enabled
- [ 995.576319] sd 4:0:0:0: [sdc] Asking for cache data failed
- [ 995.576332] sd 4:0:0:0: [sdc] Assuming drive cache: write through
- [ 995.576343] sd 4:0:0:0: [sdc] Attached SCSI disk
- [ 996.520923] kjournald starting. Commit interval 5 seconds
- [ 996.522258] EXT3-fs (sdc1): warning: maximal mount count reached, running e2fsck is recommended
- [ 996.524790] EXT3-fs (sdc1): using internal journal
- [ 996.524811] EXT3-fs (sdc1): mounted filesystem with ordered data mode
- [ 1021.358344] usb 1-3.1.4: USB disconnect, device number 7
- [ 1041.265339] usb 1-3.1.2: new high-speed USB device number 8 using ehci_hcd
- [ 1041.357835] usb 1-3.1.2: New USB device found, idVendor=1058, idProduct=1021
- [ 1041.357850] usb 1-3.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- [ 1041.357861] usb 1-3.1.2: Product: Ext HDD 1021
- [ 1041.357869] usb 1-3.1.2: Manufacturer: Western Digital
- [ 1041.357876] usb 1-3.1.2: SerialNumber: 5743415A4131343230303138
- [ 1041.359748] scsi5 : usb-storage 1-3.1.2:1.0
- [ 1042.358482] scsi 5:0:0:0: Direct-Access WD Ext HDD 1021 2002 PQ: 0 ANSI: 4
- [ 1042.363590] sd 5:0:0:0: Attached scsi generic sg3 type 0
- [ 1042.365274] sd 5:0:0:0: [sdc] 2930272256 512-byte logical blocks: (1.50 TB/1.36 TiB)
- [ 1042.366381] sd 5:0:0:0: [sdc] Test WP failed, assume Write Enabled
- [ 1042.367454] sd 5:0:0:0: [sdc] Asking for cache data failed
- [ 1042.367466] sd 5:0:0:0: [sdc] Assuming drive cache: write through
- [ 1042.378599] sd 5:0:0:0: [sdc] Test WP failed, assume Write Enabled
- [ 1042.379596] sd 5:0:0:0: [sdc] Asking for cache data failed
- [ 1042.379610] sd 5:0:0:0: [sdc] Assuming drive cache: write through
- [ 1042.405882] sdc: sdc1
- [ 1042.411688] sd 5:0:0:0: [sdc] Test WP failed, assume Write Enabled
- [ 1042.412849] sd 5:0:0:0: [sdc] Asking for cache data failed
- [ 1042.412864] sd 5:0:0:0: [sdc] Assuming drive cache: write through
- [ 1042.412876] sd 5:0:0:0: [sdc] Attached SCSI disk
- [ 1043.334784] kjournald starting. Commit interval 5 seconds
- [ 1043.341960] EXT3-fs (sdc1): warning: maximal mount count reached, running e2fsck is recommended
- [ 1043.345315] EXT3-fs (sdc1): using internal journal
- [ 1043.345337] EXT3-fs (sdc1): mounted filesystem with ordered data mode
- [ 1501.038181] usb 1-3.1.2: USB disconnect, device number 8
- [ 9414.681210] usb 1-3.1.4: new high-speed USB device number 9 using ehci_hcd
- [ 9414.774858] usb 1-3.1.4: New USB device found, idVendor=1058, idProduct=1021
- [ 9414.774874] usb 1-3.1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- [ 9414.774884] usb 1-3.1.4: Product: Ext HDD 1021
- [ 9414.774892] usb 1-3.1.4: Manufacturer: Western Digital
- [ 9414.774900] usb 1-3.1.4: SerialNumber: 5743415A4131343230303138
- [ 9414.776568] scsi6 : usb-storage 1-3.1.4:1.0
- [ 9415.778660] scsi 6:0:0:0: Direct-Access WD Ext HDD 1021 2002 PQ: 0 ANSI: 4
- [ 9415.782509] sd 6:0:0:0: Attached scsi generic sg3 type 0
- [ 9415.785294] sd 6:0:0:0: [sdc] 2930272256 512-byte logical blocks: (1.50 TB/1.36 TiB)
- [ 9415.786346] sd 6:0:0:0: [sdc] Test WP failed, assume Write Enabled
- [ 9415.787228] sd 6:0:0:0: [sdc] Asking for cache data failed
- [ 9415.787239] sd 6:0:0:0: [sdc] Assuming drive cache: write through
- [ 9415.791946] sd 6:0:0:0: [sdc] Test WP failed, assume Write Enabled
- [ 9415.793194] sd 6:0:0:0: [sdc] Asking for cache data failed
- [ 9415.793211] sd 6:0:0:0: [sdc] Assuming drive cache: write through
- [ 9415.819990] sdc: sdc1
- [ 9415.823502] sd 6:0:0:0: [sdc] Test WP failed, assume Write Enabled
- [ 9415.825627] sd 6:0:0:0: [sdc] Asking for cache data failed
- [ 9415.825641] sd 6:0:0:0: [sdc] Assuming drive cache: write through
- [ 9415.825653] sd 6:0:0:0: [sdc] Attached SCSI disk
- [ 9416.952974] kjournald starting. Commit interval 5 seconds
- [ 9416.954283] EXT3-fs (sdc1): warning: maximal mount count reached, running e2fsck is recommended
- [ 9416.956790] EXT3-fs (sdc1): using internal journal
- [ 9416.956812] EXT3-fs (sdc1): mounted filesystem with ordered data mode
- [ 9531.714406] usb 1-3.1.4: USB disconnect, device number 9
- [18277.762493] warning: `VirtualBox' uses 32-bit capabilities (legacy support in use)
- [23577.276459] usb 1-2: new high-speed USB device number 10 using ehci_hcd
- [23577.632156] usb 1-2: New USB device found, idVendor=0951, idProduct=1643
- [23577.632171] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- [23577.632181] usb 1-2: Product: DataTraveler G3
- [23577.632188] usb 1-2: Manufacturer: Kingston
- [23577.632195] usb 1-2: SerialNumber: 001CC05FE935F0A0B9281337
- [23577.634016] scsi7 : usb-storage 1-2:1.0
- [23578.644320] scsi 7:0:0:0: Direct-Access Kingston DataTraveler G3 1.00 PQ: 0 ANSI: 2
- [23578.645885] sd 7:0:0:0: Attached scsi generic sg3 type 0
- [23578.648830] sd 7:0:0:0: [sdc] 7557704 512-byte logical blocks: (3.86 GB/3.60 GiB)
- [23578.649380] sd 7:0:0:0: [sdc] Write Protect is off
- [23578.649388] sd 7:0:0:0: [sdc] Mode Sense: 03 00 00 00
- [23578.651232] sd 7:0:0:0: [sdc] No Caching mode page present
- [23578.651242] sd 7:0:0:0: [sdc] Assuming drive cache: write through
- [23578.656164] sd 7:0:0:0: [sdc] No Caching mode page present
- [23578.656176] sd 7:0:0:0: [sdc] Assuming drive cache: write through
- [23578.658678] sdc: sdc1
- [23578.661795] sd 7:0:0:0: [sdc] No Caching mode page present
- [23578.661805] sd 7:0:0:0: [sdc] Assuming drive cache: write through
- [23578.661813] sd 7:0:0:0: [sdc] Attached SCSI removable disk
- [23580.031108] EXT4-fs (sdc1): warning: maximal mount count reached, running e2fsck is recommended
- [23580.034435] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
- [23633.557445] usb 1-2: USB disconnect, device number 10
- [23927.553995] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
- [23927.554035] PM: Basic memory bitmaps created
- [23927.554039] PM: Syncing filesystems ... done.
- [23927.827983] Freezing user space processes ... (elapsed 0.04 seconds) done.
- [23927.876650] PM: Preallocating image memory... done (allocated 226513 pages)
- [23929.313036] PM: Allocated 906052 kbytes in 1.43 seconds (633.60 MB/s)
- [23929.313042] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
- [23929.328580] Suspending console(s) (use no_console_suspend to debug)
- [23929.329804] Ready to suspend
- [23929.432442] ACPI handle has no context!
- [23929.532347] sd 0:0:0:0: [sda] Synchronizing SCSI cache
- [23930.344656] PM: freeze of devices complete after 1016.058 msecs
- [23930.345459] PM: late freeze of devices complete after 0.795 msecs
- [23930.345504] ACPI: Preparing to enter system sleep state S4
- [23930.347831] PM: Saving platform NVS memory
- [23930.366565] Disabling non-boot CPUs ...
- [23930.368847] CPU 1 is now offline
- [23930.369762] PM: Creating hibernation image:
- [23930.372823] PM: Need to copy 183284 pages
- [23930.372823] PM: Normal pages needed: 95109 + 1024, available pages: 132587
- [23930.372823] PM: Restoring platform NVS memory
- [23930.372823] microcode: CPU0: new patch_level=0x0500010d
- [23930.377542] Enabling non-boot CPUs ...
- [23930.377821] Booting Node 0 Processor 1 APIC 0x1
- [23930.377825] smpboot cpu 1: start_ip = 9b000
- [23930.368817] Initializing CPU#1
- [23930.368817] Calibrating delay loop (skipped) already calibrated this CPU
- [23930.409750] NMI watchdog enabled, takes one hw-pmu counter.
- [23930.414183] microcode: CPU1: new patch_level=0x0500010d
- [23930.418562] CPU1 is up
- [23930.421690] ACPI: Waking up from system sleep state S4
- [23930.616579] PM: early restore of devices complete after 1.370 msecs
- [23930.695985] radeon 0000:00:01.0: setting latency timer to 64
- [23930.696174] snd_hda_intel 0000:00:01.1: setting latency timer to 64
- [23930.696243] snd_hda_intel 0000:00:01.1: irq 45 for MSI/MSI-X
- [23930.696917] Ready to resume
- [23930.696938] rts_pstor 0000:02:00.0: setting latency timer to 64
- [23930.696946] rtsx_acquire_irq: chip->msi_en = 0, pci->irq = 20
- [23930.709559] sd 0:0:0:0: [sda] Starting disk
- [23930.756083] usb usb3: root hub lost power or was reset
- [23930.756224] usb usb1: root hub lost power or was reset
- [23930.760237] usb usb4: root hub lost power or was reset
- [23930.764295] usb usb5: root hub lost power or was reset
- [23930.764392] usb usb2: root hub lost power or was reset
- [23931.110797] [drm] PCIE GART of 512M enabled (table at 0x0000000000F88000).
- [23931.111515] radeon 0000:00:01.0: WB enabled
- [23931.111523] [drm] fence driver on ring 0 use gpu addr 0x18000c00 and cpu addr 0xffa8ac00
- [23931.112262] usb 1-3: reset high-speed USB device number 2 using ehci_hcd
- [23931.127928] [drm] ring test on 0 succeeded in 1 usecs
- [23931.128483] [drm] ib test on ring 0 succeeded in 0 usecs
- [23931.192324] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
- [23931.192375] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- [23931.195221] ata1.00: configured for UDMA/100
- [23931.196335] ata2.00: configured for UDMA/100
- [23931.356348] usb 2-2: reset high-speed USB device number 2 using ehci_hcd
- [23931.624325] usb 4-2: reset full-speed USB device number 2 using ohci_hcd
- [23932.040713] usb 1-3.4: reset low-speed USB device number 4 using ehci_hcd
- [23932.393571] usb 1-3.1: reset high-speed USB device number 3 using ehci_hcd
- [23932.956996] usb 1-3.1.1: reset low-speed USB device number 5 using ehci_hcd
- [23933.260761] PM: restore of devices complete after 2565.026 msecs
- [23933.260959] PM: Image restored successfully.
- [23933.260963] Restarting tasks ... done.
- [23933.268627] PM: Basic memory bitmaps freed
- [23933.268642] video LNXVIDEO:00: Restoring backlight state
- [23937.207248] r8169 0000:06:00.0: eth2: link down
- [23937.207273] r8169 0000:06:00.0: eth2: link down
- [23937.207873] ADDRCONF(NETDEV_UP): eth2: link is not ready
- [23938.807708] r8169 0000:06:00.0: eth2: link up
- [23938.808285] ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
- [23949.616262] eth2: no IPv6 routers present
- [24754.760765] snd_hda_intel 0000:00:01.1: irq 45 for MSI/MSI-X
- [24754.760812] snd_hda_intel 0000:00:01.1: setting latency timer to 64
- [24754.808277] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0
- [24754.808646] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input19
- [24754.905424] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input20
- [24754.914918] input: HDA ATI SB Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input21
- [24754.915628] input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input22
- [30886.300244] usb 1-2: new high-speed USB device number 11 using ehci_hcd
- [30886.656040] usb 1-2: New USB device found, idVendor=0951, idProduct=1643
- [30886.656056] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- [30886.656066] usb 1-2: Product: DataTraveler G3
- [30886.656074] usb 1-2: Manufacturer: Kingston
- [30886.656081] usb 1-2: SerialNumber: 001CC05FE935F0A0B9281337
- [30886.657768] scsi8 : usb-storage 1-2:1.0
- [30887.658209] scsi 8:0:0:0: Direct-Access Kingston DataTraveler G3 1.00 PQ: 0 ANSI: 2
- [30887.661921] sd 8:0:0:0: Attached scsi generic sg3 type 0
- [30887.662298] sd 8:0:0:0: [sdc] 7557704 512-byte logical blocks: (3.86 GB/3.60 GiB)
- [30887.663071] sd 8:0:0:0: [sdc] Write Protect is off
- [30887.663088] sd 8:0:0:0: [sdc] Mode Sense: 03 00 00 00
- [30887.663660] sd 8:0:0:0: [sdc] No Caching mode page present
- [30887.663671] sd 8:0:0:0: [sdc] Assuming drive cache: write through
- [30887.669669] sd 8:0:0:0: [sdc] No Caching mode page present
- [30887.669684] sd 8:0:0:0: [sdc] Assuming drive cache: write through
- [30887.670955] sdc: sdc1
- [30887.673908] sd 8:0:0:0: [sdc] No Caching mode page present
- [30887.673919] sd 8:0:0:0: [sdc] Assuming drive cache: write through
- [30887.673930] sd 8:0:0:0: [sdc] Attached SCSI removable disk
- [30889.395760] EXT4-fs (sdc1): warning: maximal mount count reached, running e2fsck is recommended
- [30889.398658] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
- [30964.624831] usb 1-2: USB disconnect, device number 11
- [31343.469855] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
- [31343.469866] PM: Basic memory bitmaps created
- [31343.469870] PM: Syncing filesystems ... done.
- [31343.591613] Freezing user space processes ... (elapsed 0.01 seconds) done.
- [31343.608623] PM: Preallocating image memory... done (allocated 226501 pages)
- [31344.410517] PM: Allocated 906004 kbytes in 0.80 seconds (1132.50 MB/s)
- [31344.410524] Freezing remaining freezable tasks ... (elapsed 0.07 seconds) done.
- [31344.488582] Suspending console(s) (use no_console_suspend to debug)
- [31344.488990] sd 0:0:0:0: [sda] Synchronizing SCSI cache
- [31344.490390] Ready to suspend
- [31344.592299] ACPI handle has no context!
- [31345.504644] PM: freeze of devices complete after 1016.044 msecs
- [31345.505632] PM: late freeze of devices complete after 0.980 msecs
- [31345.505677] ACPI: Preparing to enter system sleep state S4
- [31345.507991] PM: Saving platform NVS memory
- [31345.525938] Disabling non-boot CPUs ...
- [31345.528394] CPU 1 is now offline
- [31345.529390] PM: Creating hibernation image:
- [31345.532369] PM: Need to copy 176732 pages
- [31345.532369] PM: Normal pages needed: 90662 + 1024, available pages: 137034
- [31345.532369] PM: Restoring platform NVS memory
- [31345.532369] microcode: CPU0: new patch_level=0x0500010d
- [31345.537160] Enabling non-boot CPUs ...
- [31345.537440] Booting Node 0 Processor 1 APIC 0x1
- [31345.537444] smpboot cpu 1: start_ip = 9b000
- [31345.528363] Initializing CPU#1
- [31345.528363] Calibrating delay loop (skipped) already calibrated this CPU
- [31345.569357] NMI watchdog enabled, takes one hw-pmu counter.
- [31345.573794] microcode: CPU1: new patch_level=0x0500010d
- [31345.577968] CPU1 is up
- [31345.580962] ACPI: Waking up from system sleep state S4
- [31345.756595] PM: early restore of devices complete after 1.379 msecs
- [31345.832965] radeon 0000:00:01.0: setting latency timer to 64
- [31345.832982] snd_hda_intel 0000:00:01.1: setting latency timer to 64
- [31345.833052] snd_hda_intel 0000:00:01.1: irq 45 for MSI/MSI-X
- [31345.833653] Ready to resume
- [31345.833768] rts_pstor 0000:02:00.0: setting latency timer to 64
- [31345.833776] rtsx_acquire_irq: chip->msi_en = 0, pci->irq = 20
- [31345.849369] sd 0:0:0:0: [sda] Starting disk
- [31345.892202] usb usb3: root hub lost power or was reset
- [31345.896258] usb usb4: root hub lost power or was reset
- [31345.900316] usb usb5: root hub lost power or was reset
- [31345.900420] usb usb1: root hub lost power or was reset
- [31345.900471] usb usb2: root hub lost power or was reset
- [31346.248254] usb 1-3: reset high-speed USB device number 2 using ehci_hcd
- [31346.248467] [drm] PCIE GART of 512M enabled (table at 0x0000000000F88000).
- [31346.248907] radeon 0000:00:01.0: WB enabled
- [31346.248915] [drm] fence driver on ring 0 use gpu addr 0x18000c00 and cpu addr 0xffa8ac00
- [31346.265212] [drm] ring test on 0 succeeded in 1 usecs
- [31346.265298] [drm] ib test on ring 0 succeeded in 0 usecs
- [31346.340178] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- [31346.340231] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
- [31346.343248] ata1.00: configured for UDMA/100
- [31346.344373] ata2.00: configured for UDMA/100
- [31346.492171] usb 2-2: reset high-speed USB device number 2 using ehci_hcd
- [31346.760179] usb 4-2: reset full-speed USB device number 2 using ohci_hcd
- [31346.989716] usb 1-3.1: reset high-speed USB device number 3 using ehci_hcd
- [31347.341045] usb 1-3.4: reset low-speed USB device number 4 using ehci_hcd
- [31347.880972] usb 1-3.1.1: reset low-speed USB device number 5 using ehci_hcd
- [31348.184700] PM: restore of devices complete after 2351.948 msecs
- [31348.184897] PM: Image restored successfully.
- [31348.184902] Restarting tasks ... done.
- [31348.188418] PM: Basic memory bitmaps freed
- [31348.188866] video LNXVIDEO:00: Restoring backlight state
- [31354.039186] r8169 0000:06:00.0: eth2: link down
- [31354.039235] r8169 0000:06:00.0: eth2: link down
- [31354.040261] ADDRCONF(NETDEV_UP): eth2: link is not ready
- [31355.721950] r8169 0000:06:00.0: eth2: link up
- [31355.722479] ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
- [31366.304049] eth2: no IPv6 routers present
- [35779.988439] usb 1-1: new high-speed USB device number 12 using ehci_hcd
- [35780.348413] usb 1-1: New USB device found, idVendor=0951, idProduct=1643
- [35780.348428] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- [35780.348438] usb 1-1: Product: DataTraveler G3
- [35780.348445] usb 1-1: Manufacturer: Kingston
- [35780.348452] usb 1-1: SerialNumber: 001CC05FE935F0A0B9281337
- [35780.350343] scsi9 : usb-storage 1-1:1.0
- [35781.351082] scsi 9:0:0:0: Direct-Access Kingston DataTraveler G3 1.00 PQ: 0 ANSI: 2
- [35781.354549] sd 9:0:0:0: Attached scsi generic sg3 type 0
- [35781.357585] sd 9:0:0:0: [sdc] 7557704 512-byte logical blocks: (3.86 GB/3.60 GiB)
- [35781.358151] sd 9:0:0:0: [sdc] Write Protect is off
- [35781.358163] sd 9:0:0:0: [sdc] Mode Sense: 03 00 00 00
- [35781.358650] sd 9:0:0:0: [sdc] No Caching mode page present
- [35781.358662] sd 9:0:0:0: [sdc] Assuming drive cache: write through
- [35781.363164] sd 9:0:0:0: [sdc] No Caching mode page present
- [35781.363179] sd 9:0:0:0: [sdc] Assuming drive cache: write through
- [35781.364467] sdc: sdc1
- [35781.367536] sd 9:0:0:0: [sdc] No Caching mode page present
- [35781.367548] sd 9:0:0:0: [sdc] Assuming drive cache: write through
- [35781.367559] sd 9:0:0:0: [sdc] Attached SCSI removable disk
- [35784.529847] EXT4-fs (sdc1): warning: maximal mount count reached, running e2fsck is recommended
- [35784.533067] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
- [35805.539298] usb 1-1: USB disconnect, device number 12
- [55784.061818] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
- [55784.061830] PM: Basic memory bitmaps created
- [55784.061834] PM: Syncing filesystems ... done.
- [55784.469851] Freezing user space processes ... (elapsed 0.01 seconds) done.
- [55784.484703] PM: Preallocating image memory... done (allocated 226503 pages)
- [55787.763175] PM: Allocated 906012 kbytes in 3.27 seconds (277.06 MB/s)
- [55787.763181] Freezing remaining freezable tasks ... (elapsed 0.02 seconds) done.
- [55787.792416] Suspending console(s) (use no_console_suspend to debug)
- [55787.793390] Ready to suspend
- [55787.794394] ACPI handle has no context!
- [55787.996246] sd 0:0:0:0: [sda] Synchronizing SCSI cache
- [55788.808704] PM: freeze of devices complete after 1016.270 msecs
- [55788.809695] PM: late freeze of devices complete after 0.983 msecs
- [55788.809740] ACPI: Preparing to enter system sleep state S4
- [55788.811966] PM: Saving platform NVS memory
- [55788.830260] Disabling non-boot CPUs ...
- [55788.832822] CPU 1 is now offline
- [55788.833831] PM: Creating hibernation image:
- [55788.836774] PM: Need to copy 186780 pages
- [55788.836774] PM: Normal pages needed: 108685 + 1024, available pages: 155665
- [55788.836774] PM: Restoring platform NVS memory
- [55788.836774] microcode: CPU0: new patch_level=0x0500010d
- [55788.841610] Enabling non-boot CPUs ...
- [55788.841892] Booting Node 0 Processor 1 APIC 0x1
- [55788.841897] smpboot cpu 1: start_ip = 9b000
- [55788.832763] Initializing CPU#1
- [55788.832763] Calibrating delay loop (skipped) already calibrated this CPU
- [55788.873756] NMI watchdog enabled, takes one hw-pmu counter.
- [55788.878085] microcode: CPU1: new patch_level=0x0500010d
- [55788.882534] CPU1 is up
- [55788.885557] ACPI: Waking up from system sleep state S4
- [55789.080577] PM: early restore of devices complete after 1.375 msecs
- [55789.159820] radeon 0000:00:01.0: setting latency timer to 64
- [55789.159992] snd_hda_intel 0000:00:01.1: setting latency timer to 64
- [55789.160102] snd_hda_intel 0000:00:01.1: irq 45 for MSI/MSI-X
- [55789.160751] Ready to resume
- [55789.160772] rts_pstor 0000:02:00.0: setting latency timer to 64
- [55789.160780] rtsx_acquire_irq: chip->msi_en = 0, pci->irq = 20
- [55789.176305] sd 0:0:0:0: [sda] Starting disk
- [55789.220082] usb usb3: root hub lost power or was reset
- [55789.220224] usb usb1: root hub lost power or was reset
- [55789.224236] usb usb4: root hub lost power or was reset
- [55789.228294] usb usb5: root hub lost power or was reset
- [55789.228392] usb usb2: root hub lost power or was reset
- [55789.573784] [drm] PCIE GART of 512M enabled (table at 0x0000000000F88000).
- [55789.574193] radeon 0000:00:01.0: WB enabled
- [55789.574200] [drm] fence driver on ring 0 use gpu addr 0x18000c00 and cpu addr 0xffa8ac00
- [55789.576178] usb 2-2: reset high-speed USB device number 2 using ehci_hcd
- [55789.590514] [drm] ring test on 0 succeeded in 1 usecs
- [55789.590600] [drm] ib test on ring 0 succeeded in 0 usecs
- [55789.656197] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
- [55789.660178] ata2.00: configured for UDMA/100
- [55789.668194] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- [55789.671418] ata1.00: configured for UDMA/100
- [55789.820330] usb 1-3: reset high-speed USB device number 2 using ehci_hcd
- [55790.088312] usb 4-2: reset full-speed USB device number 2 using ohci_hcd
- [55790.504830] usb 1-3.4: reset low-speed USB device number 4 using ehci_hcd
- [55790.856947] usb 1-3.1: reset high-speed USB device number 3 using ehci_hcd
- [55791.417248] usb 1-3.1.1: reset low-speed USB device number 5 using ehci_hcd
- [55791.720744] PM: restore of devices complete after 2561.172 msecs
- [55791.720941] PM: Image restored successfully.
- [55791.720945] Restarting tasks ... done.
- [55791.724979] PM: Basic memory bitmaps freed
- [55791.724993] video LNXVIDEO:00: Restoring backlight state
- [55805.387094] r8169 0000:06:00.0: eth2: link down
- [55805.387119] r8169 0000:06:00.0: eth2: link down
- [55805.387920] ADDRCONF(NETDEV_UP): eth2: link is not ready
- [55806.974113] r8169 0000:06:00.0: eth2: link up
- [55806.974654] ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
- [55817.576274] eth2: no IPv6 routers present
- [56511.573173] usb 1-3.1.4: new high-speed USB device number 13 using ehci_hcd
- [56511.666171] usb 1-3.1.4: New USB device found, idVendor=1058, idProduct=1021
- [56511.666187] usb 1-3.1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- [56511.666197] usb 1-3.1.4: Product: Ext HDD 1021
- [56511.666204] usb 1-3.1.4: Manufacturer: Western Digital
- [56511.666212] usb 1-3.1.4: SerialNumber: 574D415A4137393533393539
- [56511.668758] scsi10 : usb-storage 1-3.1.4:1.0
- [56512.672347] scsi 10:0:0:0: Direct-Access WD Ext HDD 1021 2021 PQ: 0 ANSI: 4
- [56512.678281] sd 10:0:0:0: Attached scsi generic sg3 type 0
- [56512.678818] sd 10:0:0:0: [sdc] 3907024896 512-byte logical blocks: (2.00 TB/1.81 TiB)
- [56512.680707] sd 10:0:0:0: [sdc] Write Protect is off
- [56512.680724] sd 10:0:0:0: [sdc] Mode Sense: 17 00 10 08
- [56512.682557] sd 10:0:0:0: [sdc] No Caching mode page present
- [56512.682570] sd 10:0:0:0: [sdc] Assuming drive cache: write through
- [56512.691543] sd 10:0:0:0: [sdc] No Caching mode page present
- [56512.691559] sd 10:0:0:0: [sdc] Assuming drive cache: write through
- [56512.704642] sdc: sdc1
- [56512.710664] sd 10:0:0:0: [sdc] No Caching mode page present
- [56512.710681] sd 10:0:0:0: [sdc] Assuming drive cache: write through
- [56512.710693] sd 10:0:0:0: [sdc] Attached SCSI disk
- [56515.001058] kjournald starting. Commit interval 5 seconds
- [56515.002794] EXT3-fs (sdc1): warning: maximal mount count reached, running e2fsck is recommended
- [56515.005832] EXT3-fs (sdc1): using internal journal
- [56515.005853] EXT3-fs (sdc1): mounted filesystem with ordered data mode
- [64632.660736] usb 1-3.1.4: USB disconnect, device number 13
- [64653.081039] usb 1-3.1.4: new high-speed USB device number 14 using ehci_hcd
- [64653.174909] usb 1-3.1.4: New USB device found, idVendor=1058, idProduct=1021
- [64653.174924] usb 1-3.1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- [64653.174934] usb 1-3.1.4: Product: Ext HDD 1021
- [64653.174941] usb 1-3.1.4: Manufacturer: Western Digital
- [64653.174949] usb 1-3.1.4: SerialNumber: 5743415A4131343230303138
- [64653.177168] scsi11 : usb-storage 1-3.1.4:1.0
- [64654.188148] scsi 11:0:0:0: Direct-Access WD Ext HDD 1021 2002 PQ: 0 ANSI: 4
- [64654.189766] sd 11:0:0:0: Attached scsi generic sg3 type 0
- [64654.191614] sd 11:0:0:0: [sdc] 2930272256 512-byte logical blocks: (1.50 TB/1.36 TiB)
- [64654.192786] sd 11:0:0:0: [sdc] Test WP failed, assume Write Enabled
- [64654.193649] sd 11:0:0:0: [sdc] Asking for cache data failed
- [64654.193659] sd 11:0:0:0: [sdc] Assuming drive cache: write through
- [64654.196279] sd 11:0:0:0: [sdc] Test WP failed, assume Write Enabled
- [64654.197140] sd 11:0:0:0: [sdc] Asking for cache data failed
- [64654.197148] sd 11:0:0:0: [sdc] Assuming drive cache: write through
- [64654.211358] sdc: sdc1
- [64654.215993] sd 11:0:0:0: [sdc] Test WP failed, assume Write Enabled
- [64654.217422] sd 11:0:0:0: [sdc] Asking for cache data failed
- [64654.217434] sd 11:0:0:0: [sdc] Assuming drive cache: write through
- [64654.217441] sd 11:0:0:0: [sdc] Attached SCSI disk
- [64655.620576] kjournald starting. Commit interval 5 seconds
- [64655.621924] EXT3-fs (sdc1): warning: maximal mount count reached, running e2fsck is recommended
- [64655.623930] EXT3-fs (sdc1): using internal journal
- [64655.623952] EXT3-fs (sdc1): mounted filesystem with ordered data mode
- [66132.109444] usb 1-3.1.4: USB disconnect, device number 14
- [66132.324759] usb 1-3.1.4: new high-speed USB device number 15 using ehci_hcd
- [66132.418327] usb 1-3.1.4: New USB device found, idVendor=1058, idProduct=1021
- [66132.418343] usb 1-3.1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- [66132.418353] usb 1-3.1.4: Product: Ext HDD 1021
- [66132.418361] usb 1-3.1.4: Manufacturer: Western Digital
- [66132.418368] usb 1-3.1.4: SerialNumber: 5743415A4131343230303138
- [66132.420264] scsi12 : usb-storage 1-3.1.4:1.0
- [66133.428146] scsi 12:0:0:0: Direct-Access WD Ext HDD 1021 2002 PQ: 0 ANSI: 4
- [66133.429623] sd 12:0:0:0: Attached scsi generic sg3 type 0
- [66133.431709] sd 12:0:0:0: [sdd] 2930272256 512-byte logical blocks: (1.50 TB/1.36 TiB)
- [66133.432826] sd 12:0:0:0: [sdd] Test WP failed, assume Write Enabled
- [66133.433691] sd 12:0:0:0: [sdd] Asking for cache data failed
- [66133.433699] sd 12:0:0:0: [sdd] Assuming drive cache: write through
- [66133.437318] sd 12:0:0:0: [sdd] Test WP failed, assume Write Enabled
- [66133.438184] sd 12:0:0:0: [sdd] Asking for cache data failed
- [66133.438193] sd 12:0:0:0: [sdd] Assuming drive cache: write through
- [66133.458518] sdd: sdd1
- [66133.461194] sd 12:0:0:0: [sdd] Test WP failed, assume Write Enabled
- [66133.462061] sd 12:0:0:0: [sdd] Asking for cache data failed
- [66133.462070] sd 12:0:0:0: [sdd] Assuming drive cache: write through
- [66133.462078] sd 12:0:0:0: [sdd] Attached SCSI disk
- [66294.024946] Buffer I/O error on device sdc1, logical block 183108098
- [66294.024961] lost page write due to I/O error on sdc1
- [66294.024972] JBD: I/O error detected when updating journal superblock for sdc1.
- [66294.025861] Buffer I/O error on device sdc1, logical block 0
- [66294.025872] lost page write due to I/O error on sdc1
- [66294.025883] EXT3-fs (sdc1): I/O error while writing superblock
- [66303.094756] usb 1-3.1.4: USB disconnect, device number 15
- [66314.557149] usb 1-3.1.4: new high-speed USB device number 16 using ehci_hcd
- [66314.650928] usb 1-3.1.4: New USB device found, idVendor=1058, idProduct=1021
- [66314.650943] usb 1-3.1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- [66314.650954] usb 1-3.1.4: Product: Ext HDD 1021
- [66314.650962] usb 1-3.1.4: Manufacturer: Western Digital
- [66314.650970] usb 1-3.1.4: SerialNumber: 5743415A4131343230303138
- [66314.652709] scsi13 : usb-storage 1-3.1.4:1.0
- [66315.654867] scsi 13:0:0:0: Direct-Access WD Ext HDD 1021 2002 PQ: 0 ANSI: 4
- [66315.659281] sd 13:0:0:0: Attached scsi generic sg3 type 0
- [66315.660187] sd 13:0:0:0: [sdc] 2930272256 512-byte logical blocks: (1.50 TB/1.36 TiB)
- [66315.662097] sd 13:0:0:0: [sdc] Test WP failed, assume Write Enabled
- [66315.662966] sd 13:0:0:0: [sdc] Asking for cache data failed
- [66315.662978] sd 13:0:0:0: [sdc] Assuming drive cache: write through
- [66315.666974] sd 13:0:0:0: [sdc] Test WP failed, assume Write Enabled
- [66315.669268] sd 13:0:0:0: [sdc] Asking for cache data failed
- [66315.669282] sd 13:0:0:0: [sdc] Assuming drive cache: write through
- [66315.691169] sdc: sdc1
- [66315.696585] sd 13:0:0:0: [sdc] Test WP failed, assume Write Enabled
- [66315.697608] sd 13:0:0:0: [sdc] Asking for cache data failed
- [66315.697618] sd 13:0:0:0: [sdc] Assuming drive cache: write through
- [66315.697626] sd 13:0:0:0: [sdc] Attached SCSI disk
- [66316.739809] kjournald starting. Commit interval 5 seconds
- [66316.740818] EXT3-fs (sdc1): warning: maximal mount count reached, running e2fsck is recommended
- [66316.742985] EXT3-fs (sdc1): using internal journal
- [66316.743001] EXT3-fs (sdc1): recovery complete
- [66316.743572] EXT3-fs (sdc1): mounted filesystem with ordered data mode
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement