API tools faq
paste
Advertisement
Ripple0147

LE11 - Tanix TX6 - UART Logs

Ripple0147
Jun 18th, 2023
37
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 27.18 KB | None | 0 0
raw download clone embed print report
  1.  
  2. U-Boot SPL 2022.10 (Mar 18 2023 - 17:22:55 +0000)
  3. DRAM: 4096 MiB
  4. Trying to boot from MMC1
  5. NOTICE: BL31: v2.8(release):11.0.1-dirty
  6. NOTICE: BL31: Built : 16:10:38, Mar 18 2023
  7. NOTICE: BL31: Detected Allwinner H6 SoC (1728)
  8. NOTICE: BL31: Found U-Boot DTB at 0xa06fc90, model: Tanix TX6
  9.  
  10.  
  11. U-Boot 2022.10 (Mar 18 2023 - 17:22:55 +0000) Allwinner Technology
  12.  
  13. CPU: Allwinner H6 (SUN50I)
  14. Model: Tanix TX6
  15. DRAM: 3 GiB
  16. Core: 55 devices, 16 uclasses, devicetree: separate
  17. WDT: Not starting watchdog@7020400
  18. MMC: mmc@4020000: 0, mmc@4021000: 2, mmc@4022000: 1
  19. Loading Environment from FAT... Unable to read "uboot.env" from mmc0:1...
  20. In: serial@5000000
  21. Out: serial@5000000
  22. Err: serial@5000000
  23. Net: No ethernet found.
  24. Hit any key to stop autoboot: 0
  25. switch to partitions #0, OK
  26. mmc0 is current device
  27. Scanning mmc 0:1...
  28. Found /extlinux/extlinux.conf
  29. Retrieving file: /extlinux/extlinux.conf
  30. 1: LibreELEC
  31. Retrieving file: /KERNEL
  32. append: boot=UUID=1803-1707 disk=UUID=e74196e7-acc6-47fe-9d35-e547de3eae47 console=ttyS0,115200 drm.edid_firmware=edid/edid.bin video=HDMI-A-1:D
  33. Retrieving file: /sun50i-h6-tanix-tx6.dtb
  34. Moving Image from 0x40080000 to 0x40200000, end=417c0000
  35. ## Flattened Device Tree blob at 4fa00000
  36. Booting using the fdt blob at 0x4fa00000
  37. Loading Device Tree to 0000000049ff4000, end 0000000049fff014 ... OK
  38.  
  39. Starting kernel ...
  40.  
  41. [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
  42. [ 0.000000] Linux version 6.1.19 (docker@244ea9df888c) (aarch64-none-elf-gcc-12.2.0 (GCC) 12.2.0, GNU ld (GNU Binutils) 2.39) #1 SMP PREEMPT Sat Mar 18 16:53:01 UTC 2023
  43. [ 0.000000] Machine model: Tanix TX6
  44. [ 0.000000] Zone ranges:
  45. [ 0.000000] DMA [mem 0x0000000040000000-0x00000000ffffffff]
  46. [ 0.000000] DMA32 empty
  47. [ 0.000000] Normal empty
  48. [ 0.000000] Movable zone start for each node
  49. [ 0.000000] Early memory node ranges
  50. [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000ffffffff]
  51. [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000ffffffff]
  52. [ 0.000000] cma: Reserved 384 MiB at 0x00000000e4800000
  53. [ 0.000000] psci: probing for conduit method from DT.
  54. [ 0.000000] psci: PSCIv1.1 detected in firmware.
  55. [ 0.000000] psci: Using standard PSCI v0.2 function IDs
  56. [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
  57. [ 0.000000] psci: SMC Calling Convention v1.2
  58. [ 0.000000] percpu: Embedded 19 pages/cpu s37928 r8192 d31704 u77824
  59. [ 0.000000] Detected VIPT I-cache on CPU0
  60. [ 0.000000] CPU features: detected: ARM erratum 845719
  61. [ 0.000000] alternatives: applying boot alternatives
  62. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 774144
  63. [ 0.000000] Kernel command line: boot=UUID=1803-1707 disk=UUID=e74196e7-acc6-47fe-9d35-e547de3eae47 console=ttyS0,115200 drm.edid_firmware=edid/edid.bin video=HDMI-A-1:D
  64. [ 0.000000] Unknown kernel command line parameters "boot=UUID=1803-1707 disk=UUID=e74196e7-acc6-47fe-9d35-e547de3eae47", will be passed to user space.
  65. [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
  66. [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
  67. [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
  68. [ 0.000000] Memory: 2668244K/3145728K available (11776K kernel code, 1370K rwdata, 4208K rodata, 4288K init, 423K bss, 84268K reserved, 393216K cma-reserved)
  69. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  70. [ 0.000000] rcu: Preemptible hierarchical RCU implementation.
  71. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
  72. [ 0.000000] Trampoline variant of Tasks RCU enabled.
  73. [ 0.000000] Tracing variant of Tasks RCU enabled.
  74. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
  75. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
  76. [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
  77. [ 0.000000] Root IRQ handler: gic_handle_irq
  78. [ 0.000000] GIC: Using split EOI/Deactivate mode
  79. [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
  80. [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
  81. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
  82. [ 0.000000] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
  83. [ 0.000129] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
  84. [ 0.000566] Console: colour dummy device 80x25
  85. [ 0.000607] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
  86. [ 0.000620] pid_max: default: 32768 minimum: 301
  87. [ 0.000681] LSM: Security Framework initializing
  88. [ 0.000818] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
  89. [ 0.000851] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
  90. [ 0.001827] cacheinfo: Unable to detect cache hierarchy for CPU 0
  91. [ 0.002451] cblist_init_generic: Setting adjustable number of callback queues.
  92. [ 0.002461] cblist_init_generic: Setting shift to 2 and lim to 1.
  93. [ 0.002543] cblist_init_generic: Setting shift to 2 and lim to 1.
  94. [ 0.002715] rcu: Hierarchical SRCU implementation.
  95. [ 0.002720] rcu: Max phase no-delay instances is 1000.
  96. [ 0.003799] smp: Bringing up secondary CPUs ...
  97. [ 0.004680] Detected VIPT I-cache on CPU1
  98. [ 0.004768] cacheinfo: Unable to detect cache hierarchy for CPU 1
  99. [ 0.004809] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
  100. [ 0.005494] Detected VIPT I-cache on CPU2
  101. [ 0.005557] cacheinfo: Unable to detect cache hierarchy for CPU 2
  102. [ 0.005579] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
  103. [ 0.006165] Detected VIPT I-cache on CPU3
  104. [ 0.006230] cacheinfo: Unable to detect cache hierarchy for CPU 3
  105. [ 0.006250] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
  106. [ 0.006318] smp: Brought up 1 node, 4 CPUs
  107. [ 0.006325] SMP: Total of 4 processors activated.
  108. [ 0.006331] CPU features: detected: 32-bit EL0 Support
  109. [ 0.006334] CPU features: detected: CRC32 instructions
  110. [ 0.006394] CPU: All CPU(s) started at EL2
  111. [ 0.006397] alternatives: applying system-wide alternatives
  112. [ 0.007590] devtmpfs: initialized
  113. [ 0.013271] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  114. [ 0.013299] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
  115. [ 0.025751] pinctrl core: initialized pinctrl subsystem
  116. [ 0.027054] NET: Registered PF_NETLINK/PF_ROUTE protocol family
  117. [ 0.028486] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations
  118. [ 0.028770] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
  119. [ 0.028991] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
  120. [ 0.029419] thermal_sys: Registered thermal governor 'step_wise'
  121. [ 0.029458] cpuidle: using governor menu
  122. [ 0.029611] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  123. [ 0.029705] ASID allocator initialised with 65536 entries
  124. [ 0.030410] Serial: AMBA PL011 UART driver
  125. [ 0.040371] platform 6000000.hdmi: Fixed dependency cycle(s) with /soc/tcon-top@6510000
  126. [ 0.040941] platform 6510000.tcon-top: Fixed dependency cycle(s) with /soc/lcd-controller@6515000
  127. [ 0.040958] platform 6510000.tcon-top: Fixed dependency cycle(s) with /soc/bus@1000000/mixer@100000
  128. [ 0.042655] platform 6000000.hdmi: Fixed dependency cycle(s) with /connector
  129. [ 0.053906] cryptd: max_cpu_qlen set to 1000
  130. [ 0.055995] iommu: Default domain type: Translated
  131. [ 0.056005] iommu: DMA domain TLB invalidation policy: strict mode
  132. [ 0.056339] SCSI subsystem initialized
  133. [ 0.056680] usbcore: registered new interface driver usbfs
  134. [ 0.056716] usbcore: registered new interface driver hub
  135. [ 0.056745] usbcore: registered new device driver usb
  136. [ 0.057063] mc: Linux media interface: v0.10
  137. [ 0.057089] videodev: Linux video capture interface: v2.00
  138. [ 0.057185] pps_core: LinuxPPS API ver. 1 registered
  139. [ 0.057190] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  140. [ 0.057207] PTP clock support registered
  141. [ 0.057754] Advanced Linux Sound Architecture Driver Initialized.
  142. [ 0.058519] clocksource: Switched to clocksource arch_sys_counter
  143. [ 0.058727] VFS: Disk quotas dquot_6.6.0
  144. [ 0.058771] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  145. [ 0.065981] NET: Registered PF_INET protocol family
  146. [ 0.066360] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
  147. [ 0.070127] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
  148. [ 0.070212] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
  149. [ 0.070231] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
  150. [ 0.070541] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear)
  151. [ 0.071568] TCP: Hash tables configured (established 32768 bind 32768)
  152. [ 0.071733] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
  153. [ 0.071850] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
  154. [ 0.072116] NET: Registered PF_UNIX/PF_LOCAL protocol family
  155. [ 0.072592] RPC: Registered named UNIX socket transport module.
  156. [ 0.072598] RPC: Registered udp transport module.
  157. [ 0.072602] RPC: Registered tcp transport module.
  158. [ 0.072605] RPC: Registered tcp NFSv4.1 backchannel transport module.
  159. [ 0.083339] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
  160. [ 0.085521] Initialise system trusted keyrings
  161. [ 0.085846] workingset: timestamp_bits=46 max_order=20 bucket_order=0
  162. [ 0.093198] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  163. [ 0.094275] NFS: Registering the id_resolver key type
  164. [ 0.094313] Key type id_resolver registered
  165. [ 0.094317] Key type id_legacy registered
  166. [ 0.094406] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  167. [ 0.094413] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
  168. [ 0.095434] Key type cifs.idmap registered
  169. [ 0.145144] NET: Registered PF_ALG protocol family
  170. [ 0.145169] Key type asymmetric registered
  171. [ 0.145174] Asymmetric key parser 'x509' registered
  172. [ 0.146278] alg: self-tests for CTR-KDF (hmac(sha256)) passed
  173. [ 0.146373] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
  174. [ 0.146484] io scheduler mq-deadline registered
  175. [ 0.146490] io scheduler kyber registered
  176. [ 0.163351] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  177. [ 0.168792] cacheinfo: Unable to detect cache hierarchy for CPU 0
  178. [ 0.174470] loop: module loaded
  179. [ 0.195339] tun: Universal TUN/TAP device driver, 1.6
  180. [ 0.198825] usbcore: registered new interface driver uas
  181. [ 0.198873] usbcore: registered new interface driver usb-storage
  182. [ 0.201582] sun6i-rtc 7000000.rtc: registered as rtc0
  183. [ 0.201612] sun6i-rtc 7000000.rtc: setting system clock to 1970-01-01T00:00:02 UTC (2)
  184. [ 0.201717] sun6i-rtc 7000000.rtc: RTC enabled
  185. [ 0.201836] i2c_dev: i2c /dev entries driver
  186. [ 0.202365] ir_imon_decoder: IR iMON protocol handler initialized
  187. [ 0.202370] IR JVC protocol handler initialized
  188. [ 0.202375] IR MCE Keyboard/mouse protocol handler initialized
  189. [ 0.202379] IR NEC protocol handler initialized
  190. [ 0.202382] IR RC5(x/sz) protocol handler initialized
  191. [ 0.202385] IR RC6 protocol handler initialized
  192. [ 0.202389] IR RCMM protocol handler initialized
  193. [ 0.202392] IR SANYO protocol handler initialized
  194. [ 0.202394] IR Sharp protocol handler initialized
  195. [ 0.202398] IR Sony protocol handler initialized
  196. [ 0.202402] IR XMP protocol handler initialized
  197. [ 0.202447] usbcore: registered new interface driver xbox_remote
  198. [ 0.203806] sunxi-wdt 7020400.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
  199. [ 0.204652] sdhci: Secure Digital Host Controller Interface driver
  200. [ 0.204657] sdhci: Copyright(c) Pierre Ossman
  201. [ 0.204758] Synopsys Designware Multimedia Card Interface Driver
  202. [ 0.205585] sdhci-pltfm: SDHCI platform and OF driver helper
  203. [ 0.206427] ledtrig-cpu: registered to indicate activity on CPUs
  204. [ 0.206786] SMCCC: SOC_ID: ID = jep106:091e:1728 Revision = 0x00000001
  205. [ 0.206929] sun8i-ce 1904000.crypto: Set mod clock to 300000000 (300 Mhz) from 24000000 (24 Mhz)
  206. [ 0.207252] sun8i-ce 1904000.crypto: will run requests pump with realtime priority
  207. [ 0.207370] sun8i-ce 1904000.crypto: will run requests pump with realtime priority
  208. [ 0.207467] sun8i-ce 1904000.crypto: will run requests pump with realtime priority
  209. [ 0.207563] sun8i-ce 1904000.crypto: will run requests pump with realtime priority
  210. [ 0.207630] sun8i-ce 1904000.crypto: Register cbc(aes)
  211. [ 0.207702] sun8i-ce 1904000.crypto: Register ecb(aes)
  212. [ 0.207722] sun8i-ce 1904000.crypto: Register cbc(des3_ede)
  213. [ 0.207741] sun8i-ce 1904000.crypto: Register ecb(des3_ede)
  214. [ 0.207761] sun8i-ce 1904000.crypto: Register md5
  215. [ 0.207779] sun8i-ce 1904000.crypto: Register sha1
  216. [ 0.207798] sun8i-ce 1904000.crypto: Register sha224
  217. [ 0.207817] sun8i-ce 1904000.crypto: Register sha256
  218. [ 0.207835] sun8i-ce 1904000.crypto: Register sha384
  219. [ 0.207854] sun8i-ce 1904000.crypto: Register sha512
  220. [ 0.207873] sun8i-ce 1904000.crypto: Register stdrng
  221. [ 0.208922] sun8i-ce 1904000.crypto: CryptoEngine Die ID 0
  222. [ 0.209385] hid: raw HID events driver (C) Jiri Kosina
  223. [ 0.209976] usbcore: registered new interface driver usbhid
  224. [ 0.209981] usbhid: USB HID core driver
  225. [ 0.210134] cedrus 1c0e000.video-codec: Adding to iommu group 0
  226. [ 0.210344] random: crng init done
  227. [ 0.211061] cedrus 1c0e000.video-codec: Device registered as /dev/video0
  228. [ 0.215855] Initializing XFRM netlink socket
  229. [ 0.216336] NET: Registered PF_INET6 protocol family
  230. [ 0.217202] Segment Routing with IPv6
  231. [ 0.217224] In-situ OAM (IOAM) with IPv6
  232. [ 0.217277] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
  233. [ 0.217740] NET: Registered PF_PACKET protocol family
  234. [ 0.217819] Key type dns_resolver registered
  235. [ 0.218221] registered taskstats version 1
  236. [ 0.218249] Loading compiled-in X.509 certificates
  237. [ 0.238094] sun8i-mixer 1100000.mixer: Adding to iommu group 0
  238. [ 0.243487] sun50i-h6-pinctrl 300b000.pinctrl: initialized sunXi PIO driver
  239. [ 0.245682] sun50i-h6-r-pinctrl 7022000.pinctrl: initialized sunXi PIO driver
  240. [ 0.246121] sun50i-h6-pinctrl 300b000.pinctrl: supply vcc-pb not found, using dummy regulator
  241. [ 0.246755] sun50i-h6-pinctrl 300b000.pinctrl: supply vcc-ph not found, using dummy regulator
  242. [ 0.247261] printk: console [ttyS0] disabled
  243. [ 0.267632] 5000000.serial: ttyS0 at MMIO 0x5000000 (irq = 224, base_baud = 1500000) is a 16550A
  244. [ 1.464167] printk: console [ttyS0] enabled
  245. [ 1.489886] 5000400.serial: ttyS1 at MMIO 0x5000400 (irq = 225, base_baud = 1500000) is a 16550A
  246. [ 1.498796] serial serial0: tty port ttyS1 registered
  247. [ 1.504587] sun4i-drm display-engine: Adding to iommu group 0
  248. [ 1.529761] sun4i-drm display-engine: bound 1100000.mixer (ops sun8i_mixer_ops)
  249. [ 1.537258] sun4i-drm display-engine: bound 6510000.tcon-top (ops sun8i_tcon_top_ops)
  250. [ 1.545400] sun4i-drm display-engine: bound 6515000.lcd-controller (ops sun4i_tcon_ops)
  251. [ 1.553471] sun8i-dw-hdmi 6000000.hdmi: supply hvcc not found, using dummy regulator
  252. [ 1.561542] sun8i-dw-hdmi 6000000.hdmi: Detected HDMI TX controller v2.12a with HDCP (DWC HDMI 2.0 TX PHY)
  253. [ 1.571692] sun8i-dw-hdmi 6000000.hdmi: registered DesignWare HDMI I2C bus driver
  254. [ 1.580079] [drm] forcing HDMI-A-1 connector on
  255. [ 1.584646] sun4i-drm display-engine: bound 6000000.hdmi (ops sun8i_dw_hdmi_ops)
  256. [ 1.592449] [drm] Initialized sun4i-drm 1.0.0 20150629 for display-engine on minor 0
  257. [ 1.600532] platform HDMI-A-1: Direct firmware load for edid/edid.bin failed with error -2
  258. [ 1.608883] [drm:edid_load] *ERROR* Requesting EDID firmware "edid/edid.bin" failed (err=-2)
  259. [ 1.905731] Console: switching to colour frame buffer device 240x67
  260. [ 1.945309] sun4i-drm display-engine: [drm] fb0: sun4i-drmdrmfb frame buffer device
  261. [ 1.954359] xhci-hcd xhci-hcd.4.auto: xHCI Host Controller
  262. [ 1.959886] xhci-hcd xhci-hcd.4.auto: new USB bus registered, assigned bus number 1
  263. [ 1.967666] xhci-hcd xhci-hcd.4.auto: hcc params 0x0220f064 hci version 0x100 quirks 0x0000000002010010
  264. [ 1.977116] xhci-hcd xhci-hcd.4.auto: irq 228, io mem 0x05200000
  265. [ 1.983280] xhci-hcd xhci-hcd.4.auto: xHCI Host Controller
  266. [ 1.988778] xhci-hcd xhci-hcd.4.auto: new USB bus registered, assigned bus number 2
  267. [ 1.996453] xhci-hcd xhci-hcd.4.auto: Host supports USB 3.0 SuperSpeed
  268. [ 2.003549] hub 1-0:1.0: USB hub found
  269. [ 2.007336] hub 1-0:1.0: 1 port detected
  270. [ 2.011592] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
  271. [ 2.020119] hub 2-0:1.0: USB hub found
  272. [ 2.023899] hub 2-0:1.0: 1 port detected
  273. [ 2.029647] ehci-platform 5101000.usb: EHCI Host Controller
  274. [ 2.030244] ehci-platform 5311000.usb: EHCI Host Controller
  275. [ 2.030737] usb_phy_generic usb_phy_generic.5.auto: supply vcc not found, using dummy regulator
  276. [ 2.030864] usb_phy_generic usb_phy_generic.5.auto: dummy supplies not allowed for exclusive requests
  277. [ 2.031308] musb-hdrc musb-hdrc.6.auto: MUSB HDRC host driver
  278. [ 2.031332] musb-hdrc musb-hdrc.6.auto: new USB bus registered, assigned bus number 3
  279. [ 2.031928] hub 3-0:1.0: USB hub found
  280. [ 2.031958] hub 3-0:1.0: 1 port detected
  281. [ 2.035273] ehci-platform 5101000.usb: new USB bus registered, assigned bus number 4
  282. [ 2.036188] ohci-platform 5101400.usb: Generic Platform OHCI controller
  283. [ 2.036209] ohci-platform 5101400.usb: new USB bus registered, assigned bus number 5
  284. [ 2.036245] ohci-platform 5311400.usb: Generic Platform OHCI controller
  285. [ 2.036261] ohci-platform 5311400.usb: new USB bus registered, assigned bus number 6
  286. [ 2.036362] ohci-platform 5101400.usb: irq 232, io mem 0x05101400
  287. [ 2.036379] ohci-platform 5311400.usb: irq 233, io mem 0x05311400
  288. [ 2.040902] ehci-platform 5311000.usb: new USB bus registered, assigned bus number 7
  289. [ 2.049657] ehci-platform 5101000.usb: irq 229, io mem 0x05101000
  290. [ 2.058866] ehci-platform 5311000.usb: irq 230, io mem 0x05311000
  291. [ 2.078534] ehci-platform 5101000.usb: USB 2.0 started, EHCI 1.00
  292. [ 2.081362] ac200-codec: Failed to locate of_node [id: -1]
  293. [ 2.088329] hub 4-0:1.0: USB hub found
  294. [ 2.094558] ehci-platform 5311000.usb: USB 2.0 started, EHCI 1.00
  295. [ 2.102146] hub 4-0:1.0: 1 port detected
  296. [ 2.102352] ac200-efuse: Failed to locate of_node [id: -1]
  297. [ 2.102838] ac200-ephy ac200-ephy: DMA mask not set
  298. [ 2.111911] ac200-rtc: Failed to locate of_node [id: -1]
  299. [ 2.117434] hub 6-0:1.0: USB hub found
  300. [ 2.122881] ac200-tve: Failed to locate of_node [id: -1]
  301. [ 2.128704] hub 6-0:1.0: 1 port detected
  302. [ 2.139865] core: _opp_supported_by_regulators: OPP minuV: 1160000 maxuV: 1200000, not supported by regulator
  303. [ 2.143463] hub 5-0:1.0: USB hub found
  304. [ 2.148636] cpu cpu0: _opp_add: OPP not supported by regulators (1800000000)
  305. [ 2.154835] hub 5-0:1.0: 1 port detected
  306. [ 2.161364] sun50i-h6-r-pinctrl 7022000.pinctrl: supply vcc-pm not found, using dummy regulator
  307. [ 2.164577] hub 7-0:1.0: USB hub found
  308. [ 2.171179] sun50i-h6-pinctrl 300b000.pinctrl: supply vcc-pf not found, using dummy regulator
  309. [ 2.172555] sunxi-mmc 4021000.mmc: allocated mmc-pwrseq
  310. [ 2.174028] hub 7-0:1.0: 1 port detected
  311. [ 2.176497] scpi_protocol scpi: SCP Protocol 1.2 Firmware 0.4.10000 version
  312. [ 2.180215] sunxi-mmc 4020000.mmc: Got CD GPIO
  313. [ 2.184538] musb-hdrc musb-hdrc.6.auto: VBUS_ERROR in a_idle (80, <SessEnd), retry #0, port1 00000104
  314. [ 2.214667] sunxi-mmc 4020000.mmc: initialized, max. request size: 16384 KB, uses new timings mode
  315. [ 2.216363] sunxi-mmc 4021000.mmc: initialized, max. request size: 16384 KB, uses new timings mode
  316. [ 2.228899] sunxi-mmc 4022000.mmc: initialized, max. request size: 2048 KB, uses new timings mode
  317. [ 2.268658] mmc2: host does not support reading read-only switch, assuming write-enable
  318. [ 2.270357] ALSA device list:
  319. [ 2.304745] mmc2: new high speed SDHC card at address 1234
  320. [ 2.312741] #0: allwinner-hdmi
  321. [ 2.316410] mmcblk2: mmc2:1234 SA16G 14.4 GiB
  322. [ 2.321185] #1: sun50i-h6-spdif
  323. [ 2.326369] mmcblk2: p1 p2
  324. [ 2.336620] Freeing unused kernel memory: 4288K
  325. [ 2.341251] Run /init as init process
  326.  
  327. Welcome to LibreELEC (official): 11.0.1!
  328.  
  329. [ OK ] Created slice system-modprobe.slice.
  330. [ OK ] Created slice user.slice.
  331. [ OK ] Started systemd-ask-password-console.path.
  332. [ OK ] Started systemd-ask-password-wall.path.
  333. [ OK ] Reached target paths.target.
  334. [ OK ] Reached target slices.target.
  335. [ OK ] Listening on rpcbind.socket.
  336. [ OK ] Reached target rpcbind.target.
  337. [ OK ] Listening on systemd-initctl.socket.
  338. [ OK ] Listening on systemd-journald-dev-log.socket.
  339. [ OK ] Listening on systemd-journald.socket.
  340. [ OK ] Listening on systemd-udevd-control.socket.
  341. [ OK ] Listening on systemd-udevd-kernel.socket.
  342. Mounting dev-mqueue.mount...
  343. Mounting sys-kernel-debug.mount...
  344. Mounting var.mount...
  345. Starting kmod-static-nodes.service...
  346. Starting modprobe@configfs.service...
  347. Starting modprobe@drm.service...
  348. Starting modprobe@fuse.service...
  349. Starting show-version.service...
  350. Starting storage-log.service...
  351. Starting swap.service...
  352. LibreELEC (official): 11.0.1
  353. Starting systemd-hwdb-update.service...
  354. Starting systemd-modules-load.service...
  355. Starting systemd-timesyncd-setup.service...
  356. Starting systemd-udev-trigger.service...
  357. Starting wait-time-sync.service...
  358. [ OK ] Mounted dev-mqueue.mount.
  359. [ OK ] Mounted sys-kernel-debug.mount.
  360. [ OK ] Mounted var.mount.
  361. [ OK ] Finished kmod-static-nodes.service.
  362. [ OK ] Finished modprobe@configfs.service.
  363. [ OK ] Finished modprobe@drm.service.
  364. [ OK ] Finished modprobe@fuse.service.
  365. [ OK ] Finished show-version.service.
  366. [ OK ] Finished systemd-modules-load.service.
  367. [ OK ] Finished systemd-timesyncd-setup.service.
  368. [ OK ] Finished storage-log.service.
  369. [ OK ] Finished swap.service.
  370. [ OK ] Reached target swap.target.
  371. Mounting sys-fs-fuse-connections.mount...
  372. Mounting sys-kernel-config.mount...
  373. Mounting tmp.mount...
  374. Starting systemd-sysctl.service...
  375. [ OK ] Mounted sys-fs-fuse-connections.mount.
  376. [ OK ] Mounted sys-kernel-config.mount.
  377. [ OK ] Mounted tmp.mount.
  378. [ OK ] Finished systemd-sysctl.service.
  379. [ OK ] Reached target local-fs.target.
  380. Starting machine-id.service...
  381. [ OK ] Finished systemd-udev-trigger.service.
  382. [ OK ] Finished machine-id.service.
  383. Starting systemd-journald.service...
  384. Starting systemd-tmpfiles-setup-dev.service...
  385. [ OK ] Finished systemd-tmpfiles-setup-dev.service.
  386. [ OK ] Started systemd-journald.service.
  387. Starting systemd-journal-flush.service...
  388. [ OK ] Finished systemd-journal-flush.service.
  389. Starting systemd-tmpfiles-setup.service...
  390. [ OK ] Finished systemd-tmpfiles-setup.service.
  391. Starting add-entropy.service...
  392. Starting envconfig.service...
  393. Starting openssl-config.service...
  394. Starting rpcbind.service...
  395. Starting systemd-journal-catalog-update.service...
  396. Starting systemd-update-utmp.service...
  397. Starting tz-data.service...
  398. Starting usercache.service...
  399. Starting userconfig.service...
  400. [ OK ] Started rpcbind.service.
  401. [ OK ] Finished envconfig.service.
  402. [ OK ] Finished openssl-config.service.
  403. [ OK ] Finished systemd-journal-catalog-update.service.
  404. [ OK ] Finished tz-data.service.
  405. [ OK ] Finished usercache.service.
  406. [ OK ] Finished userconfig.service.
  407. Starting network-base.service...
  408. [ OK ] Finished systemd-update-utmp.service.
  409. [ OK ] Finished network-base.service.
  410. [ OK ] Finished add-entropy.service.
  411. [ OK ] Reached target time-set.target.
  412. [ OK ] Finished systemd-hwdb-update.service.
  413. Starting systemd-udevd.service...
  414. [ OK ] Started systemd-udevd.service.
  415. [ OK ] Reached target sysinit.target.
  416. [ OK ] Started systemd-tmpfiles-clean.timer.
  417. [ OK ] Reached target timers.target.
  418. [ OK ] Listening on dbus.socket.
  419. [ OK ] Listening on lircd.socket.
  420. [ OK ] Reached target sockets.target.
  421. [ OK ] Reached target basic.target.
  422. Starting brcmfmac-firmware.service...
  423. Starting connman-vpn.service...
  424. Starting cpufreq.service...
  425. Starting cron.service...
  426. Starting dbus.service...
  427. [ OK ] Started eventlircd.service.
  428. Starting iwd.service...
  429. Starting kodi-cleanlogs.service...
  430. Starting pulseaudio.service...
  431. Starting samba-config.service...
  432. Starting systemd-logind.service...
  433. [ OK ] Started wsdd2.service.
  434. [ OK ] Finished brcmfmac-firmware.service.
  435. [ OK ] Finished cpufreq.service.
  436. [ OK ] Started cron.service.
  437. [ OK ] Finished kodi-cleanlogs.service.
  438. [ OK ] Finished samba-config.service.
  439. [ OK ] Started dbus.service.
  440. [ OK ] Started systemd-logind.service.
  441. [ OK ] Started iwd.service.
  442. [ OK ] Started connman-vpn.service.
  443. [ OK ] Started pulseaudio.service.
  444. [ OK ] Reached target sound.target.
  445. Starting connman.service...
  446. [ OK ] Created slice system-udevil\x2dmount.slice.
  447. Starting udevil-mount@-dev-mmcblk1p1.service...
  448. Starting udevil-mount@-dev-mmcblk1p16.service...
  449. Starting udevil-mount@-dev-mmcblk1p2.service...
  450. Starting udevil-mount@-dev-mmcblk1p5.service...
  451. Starting udevil-mount@-dev-mmcblk1p6.service...
  452. Starting udevil-mount@-dev-mmcblk1p9.service...
  453. [ OK ] Finished udevil-mount@-dev-mmcblk1p1.service.
  454. [ OK ] Finished udevil-mount@-dev-mmcblk1p16.service.
  455. [ OK ] Finished udevil-mount@-dev-mmcblk1p2.service.
  456. [ OK ] Finished udevil-mount@-dev-mmcblk1p5.service.
  457. [ OK ] Finished udevil-mount@-dev-mmcblk1p6.service.
  458. [ OK ] Finished udevil-mount@-dev-mmcblk1p9.service.
  459. [ OK ] Started connman.service.
  460. [ OK ] Reached target network.target.
  461. [ OK ] Started avahi-daemon.service.
  462. Starting kodi-waitonnetwork.service...
  463. Starting sshd.service...
  464. Starting systemd-hostnamed.service...
  465. [ OK ] Started sshd.service.
  466. [ OK ] Started systemd-hostnamed.service.
  467. [ OK ] Finished kodi-waitonnetwork.service.
  468. [ OK ] Finished wait-time-sync.service.
  469. [ OK ] Reached target network-online.target.
  470. [ OK ] Reached target time-sync.target.
  471. [ OK ] Reached target multi-user.target.
  472. [ OK ] Reached target graphical.target.
  473. Starting kodi-autostart.service...
  474. Starting ledfix.service...
  475. Starting systemd-update-utmp-runlevel.service...
  476. Starting vfd-clock.service...
  477. [ OK ] Finished kodi-autostart.service.
  478. [ OK ] Finished ledfix.service.
  479. [ OK ] Finished vfd-clock.service.
  480. Starting kodi.service...
  481. [ OK ] Started kodi.service.
  482. [ OK ] Finished systemd-update-utmp-runlevel.service.
  483. [ OK ] Reached target kodi.target.
  484.  
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!