usb3_stick_usb2_port_ok

MR0=0x98
MR4=0x3
MR5=0xFF
MR8=0x8
MR12=0x4D
MR14=0x4D
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
CS = 1
MR0=0x18
MR4=0x3
MR5=0xFF
MR8=0x8
MR12=0x4D
MR14=0x4D
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
Bus Width=32 Col=10 Bank=8 Row=15/15 CS=2 Die Bus-Width=16 Size=2048MB
Channel 1: LPDDR4,50MHz
CS = 0
MR0=0x98
MR4=0x3
MR5=0xFF
MR8=0x8
MR12=0x4D
MR14=0x4D
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
CS = 1
MR0=0x18
MR4=0x3
MR5=0xFF
MR8=0x8
MR12=0x4D
MR14=0x4D
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
Bus Width=32 Col=10 Bank=8 Row=15/15 CS=2 Die Bus-Width=16 Size=2048MB
256B stride
channel 0
CS = 0
MR0=0x98
MR4=0x82
MR5=0xFF
MR8=0x8
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
CS = 1
MR0=0x18
MR4=0x82
MR5=0xFF
MR8=0x8
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 1
CS = 0
MR0=0x98
MR4=0x3
MR5=0xFF
MR8=0x8
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
CS = 1
MR0=0x18
MR4=0x82
MR5=0xFF
MR8=0x8
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 0 training pass!
channel 1 training pass!
change freq to 400MHz 0,1
channel 0
CS = 0
MR0=0x98
MR4=0x2
MR5=0xFF
MR8=0x8
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
CS = 1
MR0=0x18
MR4=0x2
MR5=0xFF
MR8=0x8
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 1
CS = 0
MR0=0x98
MR4=0x82
MR5=0xFF
MR8=0x8
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
CS = 1
MR0=0x18
MR4=0x2
MR5=0xFF
MR8=0x8
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 0 training pass!
channel 1 training pass!
change freq to 800MHz 1,0
ch 0 ddrconfig = 0x101, ddrsize = 0x2020
ch 1 ddrconfig = 0x101, ddrsize = 0x2020
pmugrf_os_reg[2] = 0x3AA1FAA1, stride = 0xD
OUT
U-Boot SPL board init

U-Boot SPL 2017.09-rockchip-ayufan-1033-gdf02018479 (Aug 06 2018 - 22:29:15)
booted from SPI flash
Trying to boot from SPI
NOTICE:  BL31: v1.3(debug):65aa5ce
NOTICE:  BL31: Built : 10:47:37, Jun 19 2018
NOTICE:  BL31: Rockchip release version: v1.1
INFO:    GICv3 with legacy support detected. ARM GICV3 driver initialized in EL3
INFO:    Using opteed sec cpu_context!
INFO:    boot cpu mask: 0
INFO:    plat_rockchip_pmu_init(1151): pd status 3e
INFO:    BL31: Initializing runtime services
WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE initialization. SMC`s destined for OPTEE will return SMC_UNK
ERROR:   Error initializing runtime service opteed_fast
INFO:    BL31: Preparing for EL3 exit to normal world
INFO:    Entry point address = 0x200000
INFO:    SPSR = 0x3c9


U-Boot 2017.09-rockchip-ayufan-1033-gdf02018479 (Aug 06 2018 - 22:29:23 +0000)

Model: Pine64 RockPro64
DRAM:  3.9 GiB
DCDC_REG1@vdd_center: ; enabling
DCDC_REG2@vdd_cpu_l: ; enabling
DCDC_REG3@vcc_ddr: ; enabling (ret: -38)
DCDC_REG4@vcc_1v8: set 1800000 uV; enabling
LDO_REG1@vcc1v8_dvp: set 1800000 uV; enabling
LDO_REG2@vcc3v0_touch: set 3000000 uV; enabling
LDO_REG3@vcc1v8_pmu: set 1800000 uV; enabling
LDO_REG4@vcc_sd: set 3300000 uV; enabling
LDO_REG5@vcca3v0_codec: set 3000000 uV; enabling
LDO_REG6@vcc_1v5: set 1500000 uV; enabling
LDO_REG7@vcca1v8_codec: set 1800000 uV; enabling
LDO_REG8@vcc_3v0: set 3000000 uV; enabling
SWITCH_REG1@vcc3v3_s3: ; enabling (ret: -38)
SWITCH_REG2@vcc3v3_s0: ; enabling (ret: -38)
vcc1v8-s0@vcc1v8_s0: set 1800000 uV; enabling (ret: -38)
dc-12v@dc_12v: set 12000000 uV; enabling (ret: -38)
vcc-sys@vcc_sys: set 5000000 uV; enabling (ret: -38)
vcc3v3-sys@vcc3v3_sys: set 3300000 uV; enabling (ret: -38)
vcc-phy-regulator@vcc_phy: ; enabling (ret: -38)
vdd-log@vdd_log: ; enabling (ret: -38)
MMC:   sdhci@fe330000: 0, dwmmc@fe320000: 1
SF: Detected gd25q128 with page size 256 Bytes, erase size 4 KiB, total 16 MiB
*** Warning - bad CRC, using default environment

In:    serial@ff1a0000
Out:   serial@ff1a0000
Err:   serial@ff1a0000
Model: Pine64 RockPro64
Net:   eth0: ethernet@fe300000
Hit any key to stop autoboot:  0
Card did not respond to voltage select!
mmc_init: -95, time 20
Card did not respond to voltage select!
mmc_init: -95, time 9
starting USB...
USB0:   USB EHCI 1.00
USB1:   USB EHCI 1.00
USB2:   Register 2000140 NbrPorts 2
Starting the controller
USB XHCI 1.10
USB3:   Register 2000140 NbrPorts 2
Starting the controller
USB XHCI 1.10
scanning bus 0 for devices... 2 USB Device(s) found
scanning bus 1 for devices... 1 USB Device(s) found
scanning bus 2 for devices... 1 USB Device(s) found
scanning bus 3 for devices... 1 USB Device(s) found
       scanning usb for storage devices... 1 Storage Device(s) found

Device 0: Vendor: Corsair  Rev: 0    Prod: Voyager GTX
            Type: Hard Disk
            Capacity: 122104.3 MB = 119.2 GB (250069680 x 512)
... is now current device
Scanning usb 0:7...
Found /boot/extlinux/extlinux.conf
Retrieving file: /boot/extlinux/extlinux.conf
3933 bytes read in 203 ms (18.6 KiB/s)
select kernel
1:	kernel-4.18.8-77394-g8cce48cacf88
2:	kernel-4.18.8-77394-g8cce48cacf88-memtest
3:	kernel-4.18.0-rc8-1060-ayufan-g45828c4db727
4:	kernel-4.18.0-rc8-1060-ayufan-g45828c4db727-memtest
5:	kernel-4.4.138-1094-rockchip-ayufan-gf13a8a9a4eee
6:	kernel-4.4.138-1094-rockchip-ayufan-gf13a8a9a4eee-memtest
7:	kernel-4.4.132-1075-rockchip-ayufan-ga83beded8524
8:	kernel-4.4.132-1075-rockchip-ayufan-ga83beded8524-memtest
Enter choice: 1:	kernel-4.18.8-77394-g8cce48cacf88
Retrieving file: /boot/initrd.img-4.18.8-77394-g8cce48cacf88
23870441 bytes read in 1389 ms (16.4 MiB/s)
Retrieving file: /boot/vmlinuz-4.18.8-77394-g8cce48cacf88
29178368 bytes read in 1588 ms (17.5 MiB/s)
append: rw panic=10 init=/sbin/init coherent_pool=1M ethaddr=aa:41:29:23:dc:d1 eth1addr= serial=b180dcc95b790fb cgroup_enable=cpuset cgroup_memory=1 cgroup_enable=memory swapaccount=1 root=LABEL=linux-root rootwait rootfstype=ext4
Retrieving file: /boot/dtbs/4.18.8-77394-g8cce48cacf88/rockchip/rk3399-rockpro64.dtb
54350 bytes read in 642 ms (82 KiB/s)
## Flattened Device Tree blob at 01f00000
   Booting using the fdt blob at 0x1f00000
   Loading Ramdisk to f4840000, end f5f03be9 ... OK
   Loading Device Tree to 00000000f482f000, end 00000000f483f44d ... OK

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[    0.000000] Linux version 4.18.8-77394-g8cce48cacf88 (root@rockpro64v_2_1) (gcc version 7.3.0 (Ubuntu/Linaro 7.3.0-16ubuntu3)) #1 SMP PREEMPT Wed Sep 19 16:48:35 CEST 2018
[    0.000000] Machine model: Pine64 RockPro64
[    0.000000] earlycon: uart8250 at MMIO32 0x00000000ff1a0000 (options '')
[    0.000000] bootconsole [uart8250] enabled
[    0.000000] efi: Getting EFI parameters from FDT:
[    0.000000] efi: UEFI not found.
[    0.000000] cma: Reserved 16 MiB at 0x00000000f7000000
[    0.000000] NUMA: No NUMA configuration found
[    0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x00000000f7ffffff]
[    0.000000] NUMA: NODE_DATA [mem 0xf6fa6f00-0xf6fa86bf]
[    0.000000] Zone ranges:
[    0.000000]   DMA32    [mem 0x0000000000200000-0x00000000f7ffffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000200000-0x00000000f7ffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x00000000f7ffffff]
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.0 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.0
[    0.000000] random: get_random_bytes called from start_kernel+0xa8/0x418 with crng_init=0
[    0.000000] percpu: Embedded 23 pages/cpu @(____ptrval____) s56216 r8192 d29800 u94208
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: enabling workaround for ARM erratum 845719
[    0.000000] CPU features: detected: Kernel page table isolation (KPTI)
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 999432
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: earlycon=uart8250,mmio32,0xff1a0000 rw panic=10 init=/sbin/init coherent_pool=1M ethaddr=aa:41:29:23:dc:d1 eth1addr= serial=b180dcc95b790fb cgroup_enable=cpuset cgroup_memory=1 cgroup_enable=memory swapaccount=1 root=LABEL=linux-root rootwait rootfstype=ext4
[    0.000000] Memory: 3925968K/4061184K available (17788K kernel code, 1934K rwdata, 7320K rodata, 1408K init, 476K bss, 118832K reserved, 16384K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6.
[    0.000000] 	Tasks RCU enabled.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[    0.000000] GICv3: Distributor has no Range Selector support
[    0.000000] GICv3: no VLPI support, no direct LPI support
[    0.000000] ITS [mem 0xfee20000-0xfee3ffff]
[    0.000000] ITS@0x00000000fee20000: allocated 65536 Devices @f1080000 (flat, esz 8, psz 64K, shr 0)
[    0.000000] ITS: using cache flushing for cmd queue
[    0.000000] GIC: using LPI property table @0x00000000f1040000
[    0.000000] ITS: Allocated 1792 chunks for LPIs
[    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fef00000
[    0.000000] CPU0: using LPI pending table @0x00000000f1050000
[    0.000000] GIC: using cache flushing for LPI property table
[    0.000000] GICv3: GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@1[1] /cpus/cpu@2[2] /cpus/cpu@3[3] }
[    0.000000] GICv3: GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@100[4] /cpus/cpu@101[5] }
[    0.000000] rockchip_mmc_get_phase: invalid clk rate
[    0.000000] rockchip_mmc_get_phase: invalid clk rate
[    0.000000] rockchip_mmc_get_phase: invalid clk rate
[    0.000000] rockchip_mmc_get_phase: invalid clk rate
[    0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000006] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.002564] Console: colour dummy device 80x25
[    0.002988] console [tty0] enabled
[    0.003320] bootconsole [uart8250] disabled
[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[    0.000000] Linux version 4.18.8-77394-g8cce48cacf88 (root@rockpro64v_2_1) (gcc version 7.3.0 (Ubuntu/Linaro 7.3.0-16ubuntu3)) #1 SMP PREEMPT Wed Sep 19 16:48:35 CEST 2018
[    0.000000] Machine model: Pine64 RockPro64
[    0.000000] earlycon: uart8250 at MMIO32 0x00000000ff1a0000 (options '')
[    0.000000] bootconsole [uart8250] enabled
[    0.000000] efi: Getting EFI parameters from FDT:
[    0.000000] efi: UEFI not found.
[    0.000000] cma: Reserved 16 MiB at 0x00000000f7000000
[    0.000000] NUMA: No NUMA configuration found
[    0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x00000000f7ffffff]
[    0.000000] NUMA: NODE_DATA [mem 0xf6fa6f00-0xf6fa86bf]
[    0.000000] Zone ranges:
[    0.000000]   DMA32    [mem 0x0000000000200000-0x00000000f7ffffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000200000-0x00000000f7ffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x00000000f7ffffff]
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.0 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.0
[    0.000000] random: get_random_bytes called from start_kernel+0xa8/0x418 with crng_init=0
[    0.000000] percpu: Embedded 23 pages/cpu @(____ptrval____) s56216 r8192 d29800 u94208
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: enabling workaround for ARM erratum 845719
[    0.000000] CPU features: detected: Kernel page table isolation (KPTI)
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 999432
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: earlycon=uart8250,mmio32,0xff1a0000 rw panic=10 init=/sbin/init coherent_pool=1M ethaddr=aa:41:29:23:dc:d1 eth1addr= serial=b180dcc95b790fb cgroup_enable=cpuset cgroup_memory=1 cgroup_enable=memory swapaccount=1 root=LABEL=linux-root rootwait rootfstype=ext4
[    0.000000] Memory: 3925968K/4061184K available (17788K kernel code, 1934K rwdata, 7320K rodata, 1408K init, 476K bss, 118832K reserved, 16384K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6.
[    0.000000] 	Tasks RCU enabled.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[    0.000000] GICv3: Distributor has no Range Selector support
[    0.000000] GICv3: no VLPI support, no direct LPI support
[    0.000000] ITS [mem 0xfee20000-0xfee3ffff]
[    0.000000] ITS@0x00000000fee20000: allocated 65536 Devices @f1080000 (flat, esz 8, psz 64K, shr 0)
[    0.000000] ITS: using cache flushing for cmd queue
[    0.000000] GIC: using LPI property table @0x00000000f1040000
[    0.000000] ITS: Allocated 1792 chunks for LPIs
[    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fef00000
[    0.000000] CPU0: using LPI pending table @0x00000000f1050000
[    0.000000] GIC: using cache flushing for LPI property table
[    0.000000] GICv3: GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@1[1] /cpus/cpu@2[2] /cpus/cpu@3[3] }
[    0.000000] GICv3: GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@100[4] /cpus/cpu@101[5] }
[    0.000000] rockchip_mmc_get_phase: invalid clk rate
[    0.000000] rockchip_mmc_get_phase: invalid clk rate
[    0.000000] rockchip_mmc_get_phase: invalid clk rate
[    0.000000] rockchip_mmc_get_phase: invalid clk rate
[    0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000006] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.002564] Console: colour dummy device 80x25
[    0.002988] console [tty0] enabled
[    0.003320] bootconsole [uart8250] disabled
[    0.003790] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
[    0.003826] pid_max: default: 32768 minimum: 301
[    0.003949] Security Framework initialized
[    0.006036] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.007094] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.007185] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.007238] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.030634] ASID allocator initialised with 32768 entries
[    0.038628] Hierarchical SRCU implementation.
[    0.046748] Platform MSI: interrupt-controller@fee20000 domain created
[    0.047149] PCI/MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
[    0.051362] EFI services will not be available.
[    0.059266] smp: Bringing up secondary CPUs ...
[    0.091482] Detected VIPT I-cache on CPU1
[    0.091520] GICv3: CPU1: found redistributor 1 region 0:0x00000000fef20000
[    0.091563] CPU1: using LPI pending table @0x00000000f0440000
[    0.091610] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[    0.123559] Detected VIPT I-cache on CPU2
[    0.123588] GICv3: CPU2: found redistributor 2 region 0:0x00000000fef40000
[    0.123629] CPU2: using LPI pending table @0x00000000f0480000
[    0.123661] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[    0.155658] Detected VIPT I-cache on CPU3
[    0.155685] GICv3: CPU3: found redistributor 3 region 0:0x00000000fef60000
[    0.155724] CPU3: using LPI pending table @0x00000000f0490000
[    0.155755] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[    0.190328] CPU features: enabling workaround for EL2 vector hardening
[    0.190799] Detected PIPT I-cache on CPU4
[    0.192082] GICv3: CPU4: found redistributor 100 region 0:0x00000000fef80000
[    0.194589] CPU4: using LPI pending table @0x00000000f04d0000
[    0.195802] CPU4: Booted secondary processor 0x0000000100 [0x410fd082]
[    0.233972] Detected PIPT I-cache on CPU5
[    0.235169] GICv3: CPU5: found redistributor 101 region 0:0x00000000fefa0000
[    0.237743] CPU5: using LPI pending table @0x00000000f0500000
[    0.238889] CPU5: Booted secondary processor 0x0000000101 [0x410fd082]
[    0.244066] smp: Brought up 1 node, 6 CPUs
[    0.244540] SMP: Total of 6 processors activated.
[    0.244572] CPU features: detected: GIC system register CPU interface
[    0.244599] CPU features: detected: 32-bit EL0 Support
[    0.335061] CPU: All CPU(s) started at EL2
[    0.335551] alternatives: patching kernel code
[    0.340105] devtmpfs: initialized
[    0.358425] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.358667] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.360945] xor: measuring software checksum speed
[    0.399950]    8regs     :  1151.000 MB/sec
[    0.440152]    8regs_prefetch:  1026.000 MB/sec
[    0.480382]    32regs    :  1415.000 MB/sec
[    0.520606]    32regs_prefetch:  1190.000 MB/sec
[    0.520632] xor: using function: 32regs (1415.000 MB/sec)
[    0.520701] pinctrl core: initialized pinctrl subsystem
[    0.524878] DMI not present or invalid.
[    0.527012] NET: Registered protocol family 16
[    0.532216] audit: initializing netlink subsys (disabled)
[    0.534663] audit: type=2000 audit(0.528:1): state=initialized audit_enabled=0 res=1
[    0.538905] cpuidle: using governor menu
[    0.541384] vdso: 2 pages (1 code @ (____ptrval____), 1 data @ (____ptrval____))
[    0.541684] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.551304] DMA: preallocated 1024 KiB pool for atomic allocations
[    0.554558] Serial: AMBA PL011 UART driver
[    0.684852] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.687841] cryptd: max_cpu_qlen set to 1000
[    0.755608] raid6: int64x1  gen()   217 MB/s
[    0.824126] raid6: int64x1  xor()   219 MB/s
[    0.892733] raid6: int64x2  gen()   337 MB/s
[    0.961069] raid6: int64x2  xor()   301 MB/s
[    1.029472] raid6: int64x4  gen()   517 MB/s
[    1.098046] raid6: int64x4  xor()   382 MB/s
[    1.166587] raid6: int64x8  gen()   491 MB/s
[    1.235041] raid6: int64x8  xor()   375 MB/s
[    1.303674] raid6: neonx1   gen()   363 MB/s
[    1.372051] raid6: neonx1   xor()   425 MB/s
[    1.440581] raid6: neonx2   gen()   578 MB/s
[    1.509138] raid6: neonx2   xor()   602 MB/s
[    1.577634] raid6: neonx4   gen()   751 MB/s
[    1.646070] raid6: neonx4   xor()   721 MB/s
[    1.714596] raid6: neonx8   gen()   824 MB/s
[    1.783051] raid6: neonx8   xor()   766 MB/s
[    1.783070] raid6: using algorithm neonx8 gen() 824 MB/s
[    1.783088] raid6: .... xor() 766 MB/s, rmw enabled
[    1.783107] raid6: using neon recovery algorithm
[    1.784428] ACPI: Interpreter disabled.
[    1.786988] vcc3v3_pcie: supplied by dc_12v
[    1.789412] vcc_sys: supplied by dc_12v
[    1.792818] vgaarb: loaded
[    1.793608] SCSI subsystem initialized
[    1.796818] usbcore: registered new interface driver usbfs
[    1.797086] usbcore: registered new interface driver hub
[    1.797427] usbcore: registered new device driver usb
[    1.800089] media: Linux media interface: v0.10
[    1.800305] videodev: Linux video capture interface: v2.00
[    1.801783] pps_core: LinuxPPS API ver. 1 registered
[    1.801832] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.801917] PTP clock support registered
[    1.804716] Advanced Linux Sound Architecture Driver Initialized.
[    1.806489] Bluetooth: Core ver 2.22
[    1.806641] NET: Registered protocol family 31
[    1.806665] Bluetooth: HCI device and connection manager initialized
[    1.806699] Bluetooth: HCI socket layer initialized
[    1.806725] Bluetooth: L2CAP socket layer initialized
[    1.806780] Bluetooth: SCO socket layer initialized
[    1.806858] NetLabel: Initializing
[    1.806874] NetLabel:  domain hash size = 128
[    1.806891] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    1.807028] NetLabel:  unlabeled traffic allowed by default
[    1.810736] clocksource: Switched to clocksource arch_sys_counter
[    1.811440] VFS: Disk quotas dquot_6.6.0
[    1.811575] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.812307] pnp: PnP ACPI: disabled
[    1.829553] NET: Registered protocol family 2
[    1.832017] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes)
[    1.832307] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    1.833001] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    1.833773] TCP: Hash tables configured (established 32768 bind 32768)
[    1.834292] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    1.834944] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    1.835527] NET: Registered protocol family 1
[    1.839968] RPC: Registered named UNIX socket transport module.
[    1.839998] RPC: Registered udp transport module.
[    1.840016] RPC: Registered tcp transport module.
[    1.840033] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    1.842073] Trying to unpack rootfs image as initramfs...
[    3.808981] Freeing initrd memory: 23308K
[    3.819510] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[    3.823421] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
[    3.824469] kvm [1]: 8-bit VMID
[    3.827429] kvm [1]: vgic-v2@fff20000
[    3.829183] kvm [1]: GIC system register CPU interface enabled
[    3.832850] kvm [1]: vgic interrupt IRQ10
[    3.835498] kvm [1]: Hyp mode initialized successfully
[    3.875538] workingset: timestamp_bits=44 max_order=20 bucket_order=0
[    3.893061] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    3.895602] NFS: Registering the id_resolver key type
[    3.895813] Key type id_resolver registered
[    3.895832] Key type id_legacy registered
[    3.895860] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    3.895882] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    3.897767] fuse init (API version 7.27)
[    3.899693] 9p: Installing v9fs 9p2000 file system support
[    3.901005] pstore: using deflate compression
[    3.966904] NET: Registered protocol family 38
[    3.967253] Key type asymmetric registered
[    3.967275] Asymmetric key parser 'x509' registered
[    3.968090] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[    3.968732] io scheduler noop registered
[    3.968761] io scheduler deadline registered
[    3.969776] io scheduler cfq registered (default)
[    3.969802] io scheduler mq-deadline registered
[    3.969822] io scheduler kyber registered
[    3.981198] vcc5v0_host: supplied by vcc_sys
[    4.073055] dma-pl330 ff6d0000.dma-controller: Loaded driver for PL330 DMAC-241330
[    4.073206] dma-pl330 ff6d0000.dma-controller: 	DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12
[    4.080304] dma-pl330 ff6e0000.dma-controller: Loaded driver for PL330 DMAC-241330
[    4.080527] dma-pl330 ff6e0000.dma-controller: 	DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
[    4.092414] pwm-regulator: supplied by vcc_sys
[    4.093720] vcc3v3_sys: supplied by vcc_sys
[    4.106087] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    4.112777] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 37, base_baud = 1500000) is a 16550A
[    4.115879] ff1a0000.serial: ttyS2 at MMIO 0xff1a0000 (irq = 38, base_baud = 1500000) is a 16550A
[    4.227060] console [ttyS2] enabled
[    4.230956] SuperH (H)SCI(F) driver initialized
[    4.232752] msm_serial: driver initialized
[    4.256753] cacheinfo: Unable to detect cache hierarchy for CPU 0
[    4.284679] brd: module loaded
[    4.302097] loop: module loaded
[    4.391111] rockchip-spi ff1d0000.spi: Failed to request TX DMA channel
[    4.391820] rockchip-spi ff1d0000.spi: Failed to request RX DMA channel
[    4.396872] m25p80 spi0.0: gd25q128 (16384 Kbytes)
[    4.608236] 3 fixed-partitions partitions found on MTD device spi0.0
[    4.608816] Creating 3 MTD partitions on "spi0.0":
[    4.609257] 0x000000000000-0x0000003f8000 : "loader"
[    4.612570] 0x0000003f8000-0x000000400000 : "env"
[    4.615102] 0x0000007c0000-0x000000800000 : "vendor"
[    4.619149] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
[    4.629058] libphy: Fixed MDIO Bus: probed
[    4.631471] tun: Universal TUN/TAP device driver, 1.6
[    4.637810] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    4.638758] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    4.639476] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
[    4.640109] igb: Copyright (c) 2007-2014 Intel Corporation.
[    4.640698] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k
[    4.641409] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
[    4.643396] sky2: driver version 1.30
[    4.647560] rk_gmac-dwmac fe300000.ethernet: PTP uses main clock
[    4.648446] rk_gmac-dwmac fe300000.ethernet: clock input or output? (input).
[    4.649092] rk_gmac-dwmac fe300000.ethernet: TX delay(0x28).
[    4.649609] rk_gmac-dwmac fe300000.ethernet: RX delay(0x20).
[    4.650129] rk_gmac-dwmac fe300000.ethernet: integrated PHY? (no).
[    4.650832] rk_gmac-dwmac fe300000.ethernet: clock input from PHY
[    4.656434] rk_gmac-dwmac fe300000.ethernet: init for RGMII
[    4.658352] rk_gmac-dwmac fe300000.ethernet: User ID: 0x10, Synopsys ID: 0x35
[    4.659006] rk_gmac-dwmac fe300000.ethernet: 	DWMAC1000
[    4.659484] rk_gmac-dwmac fe300000.ethernet: DMA HW capability register supported
[    4.660162] rk_gmac-dwmac fe300000.ethernet: RX Checksum Offload Engine supported
[    4.660839] rk_gmac-dwmac fe300000.ethernet: COE Type 2
[    4.661313] rk_gmac-dwmac fe300000.ethernet: TX Checksum insertion supported
[    4.661949] rk_gmac-dwmac fe300000.ethernet: Wake-Up On Lan supported
[    4.662645] rk_gmac-dwmac fe300000.ethernet: Normal descriptors
[    4.663184] rk_gmac-dwmac fe300000.ethernet: Ring mode enabled
[    4.663717] rk_gmac-dwmac fe300000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[    4.824968] libphy: stmmac: probed
[    4.825351] RTL8211F Gigabit Ethernet stmmac-0:00: attached PHY driver [RTL8211F Gigabit Ethernet] (mii_bus:phy_addr=stmmac-0:00, irq=POLL)
[    4.826585] RTL8211F Gigabit Ethernet stmmac-0:01: attached PHY driver [RTL8211F Gigabit Ethernet] (mii_bus:phy_addr=stmmac-0:01, irq=POLL)
[    4.830911] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
[    4.831796] usbcore: registered new interface driver pegasus
[    4.832477] usbcore: registered new interface driver rtl8150
[    4.833082] usbcore: registered new interface driver r8152
[    4.833652] usbcore: registered new interface driver asix
[    4.834204] usbcore: registered new interface driver ax88179_178a
[    4.834898] usbcore: registered new interface driver cdc_ether
[    4.835490] usbcore: registered new interface driver dm9601
[    4.836060] usbcore: registered new interface driver CoreChips
[    4.836666] usbcore: registered new interface driver smsc75xx
[    4.837264] usbcore: registered new interface driver smsc95xx
[    4.837838] usbcore: registered new interface driver net1080
[    4.838495] usbcore: registered new interface driver plusb
[    4.839063] usbcore: registered new interface driver cdc_subset
[    4.839665] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
[    4.840440] usbcore: registered new interface driver cdc_ncm
[    4.841539] VFIO - User Level meta-driver version: 0.3
[    4.845623] dwc3 fe800000.dwc3: Failed to get clk 'ref': -2
[    4.862016] OF: graph: no port node found in /syscon@ff770000/usb2-phy@e450/otg-port
[    4.868338] dwc3 fe900000.dwc3: Failed to get clk 'ref': -2
[    4.878662] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    4.879337] ehci-pci: EHCI PCI platform driver
[    4.879853] ehci-platform: EHCI generic platform driver
[    4.882898] ehci-platform fe380000.usb: EHCI Host Controller
[    4.883450] ehci-platform fe380000.usb: new USB bus registered, assigned bus number 1
[    4.886020] ehci-platform fe380000.usb: irq 30, io mem 0xfe380000
[    4.902423] ehci-platform fe380000.usb: USB 2.0 started, EHCI 1.00
[    4.904589] hub 1-0:1.0: USB hub found
[    4.904989] hub 1-0:1.0: 1 port detected
[    4.909185] ehci-platform fe3c0000.usb: EHCI Host Controller
[    4.909739] ehci-platform fe3c0000.usb: new USB bus registered, assigned bus number 2
[    4.912468] ehci-platform fe3c0000.usb: irq 32, io mem 0xfe3c0000
[    4.926391] ehci-platform fe3c0000.usb: USB 2.0 started, EHCI 1.00
[    4.928201] hub 2-0:1.0: USB hub found
[    4.928585] hub 2-0:1.0: 1 port detected
[    4.929995] ehci-orion: EHCI orion driver
[    4.931046] ehci-exynos: EHCI EXYNOS driver
[    4.931723] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    4.932407] ohci-pci: OHCI PCI platform driver
[    4.932989] ohci-platform: OHCI generic platform driver
[    4.933894] ohci-platform fe3a0000.usb: Generic Platform OHCI controller
[    4.934653] ohci-platform fe3a0000.usb: new USB bus registered, assigned bus number 3
[    4.937294] ohci-platform fe3a0000.usb: irq 31, io mem 0xfe3a0000
[    4.999723] hub 3-0:1.0: USB hub found
[    5.000131] hub 3-0:1.0: 1 port detected
[    5.001606] ohci-platform fe3e0000.usb: Generic Platform OHCI controller
[    5.002237] ohci-platform fe3e0000.usb: new USB bus registered, assigned bus number 4
[    5.003822] ohci-platform fe3e0000.usb: irq 33, io mem 0xfe3e0000
[    5.067579] hub 4-0:1.0: USB hub found
[    5.067968] hub 4-0:1.0: 1 port detected
[    5.069318] ohci-exynos: OHCI EXYNOS driver
[    5.071794] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[    5.072347] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 5
[    5.075737] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002010010
[    5.076679] xhci-hcd xhci-hcd.0.auto: irq 219, io mem 0xfe800000
[    5.079373] hub 5-0:1.0: USB hub found
[    5.079764] hub 5-0:1.0: 1 port detected
[    5.080744] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[    5.081263] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 6
[    5.081968] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0  SuperSpeed
[    5.082776] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[    5.084532] hub 6-0:1.0: USB hub found
[    5.084940] hub 6-0:1.0: 1 port detected
[    5.086168] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[    5.086777] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 7
[    5.117285] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002010010
[    5.124114] xhci-hcd xhci-hcd.1.auto: irq 220, io mem 0xfe900000
[    5.164548] hub 7-0:1.0: USB hub found
[    5.168084] hub 7-0:1.0: 1 port detected
[    5.185631] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[    5.188617] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 8
[    5.191985] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0  SuperSpeed
[    5.197829] usb usb8: We don't know the algorithms for LPM for this host, disabling LPM.
[    5.227852] hub 8-0:1.0: USB hub found
[    5.231237] hub 8-0:1.0: 1 port detected
[    5.271464] usbcore: registered new interface driver usb-storage
[    5.372217] i2c /dev entries driver
[    5.387064] rk808 0-001b: chip id: 0x0
[    5.395563] rk808-regulator rk808-regulator: there is no dvs0 gpio
[    5.396389] rk808-regulator rk808-regulator: there is no dvs1 gpio
[    5.397088] DCDC_REG1: supplied by vcc_sys
[    5.399071] DCDC_REG2: supplied by vcc_sys
[    5.400318] DCDC_REG3: supplied by vcc_sys
[    5.400992] DCDC_REG4: supplied by vcc_sys
[    5.401991] LDO_REG1: supplied by vcc_sys
[    5.403876] LDO_REG2: supplied by vcc_sys
[    5.405359] LDO_REG3: supplied by vcc_sys
[    5.406955] LDO_REG4: supplied by vcc_sys
[    5.407578] vcc_sdio: Bringing 3300000uV into 3000000-3000000uV
[    5.409341] LDO_REG5: supplied by vcc_sys
[    5.410709] LDO_REG6: supplied by vcc_sys
[    5.412321] LDO_REG7: supplied by vcc_sys
[    5.413699] LDO_REG8: supplied by vcc_sys
[    5.415404] SWITCH_REG1: supplied by vcc3v3_sys
[    5.416305] SWITCH_REG2: supplied by vcc3v3_sys
[    5.423147] rk808-rtc rk808-rtc: registered as rtc0
[    5.425156] fan53555-regulator 0-0040: FAN53555 Option[8] Rev[1] Detected!
[    5.425881] fan53555-reg: supplied by vcc_sys
[    5.428107] vcc1v8_s3: supplied by vcc_1v8
[    5.429810] fan53555-regulator 0-0041: FAN53555 Option[9] Rev[7] Detected!
[    5.430578] fan53555-reg: supplied by vcc_sys
[    5.432038] random: fast init done
[    5.447653] rockchip-rga ff680000.rga: HW Version: 0x03.02
[    5.454884] rockchip-rga ff680000.rga: Registered rockchip-rga as /dev/video0
[    5.485535] Bluetooth: HCI UART driver ver 2.3
[    5.492550] cpufreq: cpufreq_online: CPU4: Running at unlisted freq: 12000 KHz
[    5.494777] cpufreq: cpufreq_online: CPU4: Unlisted initial frequency changed to: 408000 KHz
[    5.496633] sdhci: Secure Digital Host Controller Interface driver
[    5.497190] sdhci: Copyright(c) Pierre Ossman
[    5.497813] Synopsys Designware Multimedia Card Interface Driver
[    5.499437] dwmmc_rockchip fe320000.dwmmc: IDMAC supports 32-bit address mode.
[    5.500309] dwmmc_rockchip fe320000.dwmmc: Using internal DMA controller.
[    5.500914] dwmmc_rockchip fe320000.dwmmc: Version ID is 270a
[    5.501473] dwmmc_rockchip fe320000.dwmmc: DW MMC controller at irq 28,32 bit host data width,256 deep fifo
[    5.502488] dwmmc_rockchip fe320000.dwmmc: Got CD GPIO
[    5.503072] vcc_sdio: unsupportable voltage range: 3300000-3000000uV
[    5.516412] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[    5.532232] sdhci-pltfm: SDHCI platform and OF driver helper
[    5.535386] mmc1: CQHCI version 5.10
[    5.562214] mmc1: SDHCI controller on fe330000.sdhci [fe330000.sdhci] using ADMA
[    5.567592] ledtrig-cpu: registered to indicate activity on CPUs
[    5.572499] usbcore: registered new interface driver usbhid
[    5.573102] usbhid: USB HID core driver
[    5.582156] xt_time: kernel timezone is -0000
[    5.582599] IPVS: Registered protocols (TCP, UDP, SCTP, AH, ESP)
[    5.583386] IPVS: Connection hash table configured (size=4096, memory=64Kbytes)
[    5.584263] IPVS: ipvs loaded.
[    5.584539] IPVS: [rr] scheduler registered.
[    5.584918] IPVS: [wrr] scheduler registered.
[    5.585304] IPVS: [lc] scheduler registered.
[    5.585682] IPVS: [wlc] scheduler registered.
[    5.586067] IPVS: [fo] scheduler registered.
[    5.586461] IPVS: [ovf] scheduler registered.
[    5.586853] IPVS: [lblc] scheduler registered.
[    5.587252] IPVS: [lblcr] scheduler registered.
[    5.587653] IPVS: [dh] scheduler registered.
[    5.588030] IPVS: [sh] scheduler registered.
[    5.588409] IPVS: [sed] scheduler registered.
[    5.588792] IPVS: [nq] scheduler registered.
[    5.589489] ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully
[    5.590090] Initializing XFRM netlink socket
[    5.590943] NET: Registered protocol family 10
[    5.592113] Segment Routing with IPv6
[    5.592746] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    5.593639] NET: Registered protocol family 17
[    5.594065] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[    5.595339] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[    5.595866] Bluetooth: HIDP socket layer initialized
[    5.596341] 8021q: 802.1Q VLAN Support v1.8
[    5.596741] 9pnet: Installing 9P2000 support
[    5.597169] Key type dns_resolver registered
[    5.598338] registered taskstats version 1
[    5.599445] Btrfs loaded, crc32c=crc32c-arm64-ce
[    5.617382] rk808-rtc rk808-rtc: setting system clock to 2018-09-20 07:17:56 UTC (1537427876)
[    5.618167] of_cfs_init
[    5.618508] of_cfs_init: OK
[    5.619207] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[    5.619987] cfg80211: failed to load regulatory.db
[    5.621264] vcc3v3_pcie: disabling
[    5.621618] ALSA device list:
[    5.621894]   No soundcards found.
[    5.622623] ttyS2 - failed to request DMA
[    5.624318] Freeing unused kernel memory: 1408K
Loading, please wait...
starting version 237
[    5.994014] iommu: Adding device ff8f0000.vop to group 0
[    5.994624] rockchip-vop ff8f0000.vop: Linked as a consumer to ff8f3f00.iommu
[    5.996083] iommu: Adding device ff900000.vop to group 1
[    5.996689] rockchip-vop ff900000.vop: Linked as a consumer to ff903f00.iommu
[    5.999738] rockchip-drm display-subsystem: Linked as a consumer to ff8f0000.vop
[    6.000406] rockchip-drm display-subsystem: Linked as a consumer to ff900000.vop
[    6.001307] rockchip-drm display-subsystem: Linked as a consumer to ff940000.hdmi
[    6.006678] rockchip-drm display-subsystem: bound ff8f0000.vop (ops vop_component_ops [rockchipdrm])
[    6.009495] rockchip-drm display-subsystem: bound ff900000.vop (ops vop_component_ops [rockchipdrm])
[    6.010444] dwhdmi-rockchip ff940000.hdmi: Detected HDMI TX controller v2.11a with HDCP (DWC HDMI 2.0 TX PHY)
[    6.013877] rockchip-drm display-subsystem: bound ff940000.hdmi (ops dw_hdmi_rockchip_ops [rockchipdrm])
[    6.014969] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    6.015607] [drm] No driver support for vblank timestamp query.
[    6.083679] Console: switching to colour frame buffer device 240x67
[    6.129493] rockchip-drm display-subsystem: fb0:  frame buffer device
[    6.142782] [drm] Initialized rockchip 1.0.0 20140818 for display-subsystem on minor 0
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
Begin: Running /scripts/local-premount ... Scanning for Btrfs filesystems
[    6.610333] usb 1-1: new high-speed USB device number 2 using ehci-platform
done.
[    6.780828] scsi host0: uas
[    6.782891] scsi 0:0:0:0: Direct-Access     Corsair  Voyager GTX      0    PQ: 0 ANSI: 6
[    6.786867] usbcore: registered new interface driver uas
[    6.788270] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[    6.789498] sd 0:0:0:0: [sda] Write Protect is off
[    6.790744] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    6.802688] GPT:Primary header thinks Alt. header is not at the end of the disk.
[    6.803580] GPT:60620799 != 250069679
[    6.804007] GPT:Alternate GPT header not at the end of the disk.
[    6.804699] GPT:60620799 != 250069679
[    6.805125] GPT: Use GNU Parted to correct GPT errors.
[    6.805757]  sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7
[    6.811253] sd 0:0:0:0: [sda] Attached SCSI disk
Warning: fsck not present, so skipping root file system
[    7.026365] EXT4-fs (sda7): mounted filesystem with writeback data mode. Opts: (null)
done.
Begin: Running /scripts/local-bottom ... done.
Begin: Running /scripts/init-bottom ... done.
[    7.572645] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[    7.575251] systemd[1]: Detected architecture arm64.

Welcome to Ubuntu 18.04.1 LTS!

[    7.589957] systemd[1]: Set hostname to <rockpro64v_2_1>.
[    7.892140] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling.
[    7.893773] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.)
[    8.112679] random: systemd: uninitialized urandom read (16 bytes read)
[    8.113393] systemd[1]: Reached target Swap.
[  OK  ] Reached target Swap.
[    8.126432] random: systemd: uninitialized urandom read (16 bytes read)
[    8.127271] systemd[1]: Reached target System Time Synchronized.
[  OK  ] Reached target System Time Synchronized.
[    8.138524] random: systemd: uninitialized urandom read (16 bytes read)
[    8.139444] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[  OK  ] Started Dispatch Password Requests to Console Directory Watch.
[    8.141818] systemd[1]: Created slice User and Session Slice.
[  OK  ] Created slice User and Session Slice.
[    8.154907] systemd[1]: Created slice System Slice.
[  OK  ] Created slice System Slice.
[  OK  ] Reached target Slices.
[  OK  ] Listening on udev Kernel Socket.
[  OK  ] Listening on Journal Socket (/dev/log).
[  OK  ] Listening on Journal Audit Socket.
[  OK  ] Listening on udev Control Socket.
[  OK  ] Listening on RPCbind Server Activation Socket.
[  OK  ] Created slice system-serial\x2dgetty.slice.
[  OK  ] Listening on /dev/initctl Compatibility Named Pipe.
[  OK  ] Started Forward Password Requests to Wall Directory Watch.
[  OK  ] Reached target Local Encrypted Volumes.
[  OK  ] Listening on Syslog Socket.
[  OK  ] Started ntp-systemd-netif.path.
[  OK  ] Listening on Journal Socket.
         Mounting RPC Pipe File System...
         Mounting NFSD configuration filesystem...
         Starting Set the console keyboard layout...
         Starting udev Coldplug all Devices...
         Mounting POSIX Message Queue File System...
         Starting Remount Root and Kernel File Systems...
         Starting Restore / save the current clock...
         Starting Nameserver information manager...
         Mounting Huge Pages File System...
         Mounting Kernel Debug File System...
         Starting Create list of required st…ce nodes for the current kernel...
         Starting Journal Service...
         Starting Load Kernel Modules...
[  OK  ] Mounted RPC Pipe File System.
[  OK  ] Mounted NFSD configuration filesystem.
[  OK  ] Mounted POSIX Message Queue File System.
[  OK  ] Started Remount Root and Kernel File Systems.
[  OK  ] Started Set the console keyboard layout.
[  OK  ] Started Journal Service.
[  OK  ] Started Restore / save the current clock.
[  OK  ] Mounted Huge Pages File System.
[  OK  ] Mounted Kernel Debug File System.
[  OK  ] Started Create list of required sta…vice nodes for the current kernel.
[  OK  ] Started Load Kernel Modules.
[  OK  ] Started Nameserver information manager.
[  OK  ] Reached target Network (Pre).
         Starting Apply Kernel Variables...
         Mounting FUSE Control File System...
         Mounting Kernel Configuration File System...
         Starting Create Static Device Nodes in /dev...
         Starting Load/Save Random Seed...
         Starting Flush Journal to Persistent Storage...
         Starting pNFS block layout mapping daemon...
[  OK  ] Started udev Coldplug all Devices.
[  OK  ] Started Apply Kernel Variables.
[  OK  ] Mounted FUSE Control File System.
[  OK  ] Mounted Kernel Configuration File System.
[  OK  ] Started Create Static Device Nodes in /dev.
[  OK  ] Started Load/Save Random Seed.
[  OK  ] Started pNFS block layout mapping daemon.
         Starting udev Kernel Device Manager...
[  OK  ] Reached target Local File Systems (Pre).
[  OK  ] Started udev Kernel Device Manager.
         Starting Network Service...
[  OK  ] Found device /dev/ttyS2.
[    9.256786] rockchip-pinctrl pinctrl: pin gpio4-0 already requested by ff880000.i2s; cannot claim for 1-0010
[    9.257887] rockchip-pinctrl pinctrl: pin-128 (1-0010) status -22
[    9.258695] rockchip-pinctrl pinctrl: could not request pin 128 (gpio4-0) from group i2s-8ch-mclk  on device rockchip-pinctrl
[    9.259917] es8316 1-0010: Error applying setting, reverse things back
[  OK  ] Started Network Service.
[  OK  ] Started Flush Journal to Persistent Storage.
[  OK  ] Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
[  OK  ] Found device Corsair_Voyager_GTX boot.
         Mounting /boot/efi...
[  OK  ] Mounted /boot/efi.
[  OK  ] Reached target Local File Systems.
         Starting Raise network interfaces...
         Starting Create Volatile Files and Directories...
         Starting Preprocess NFS configuration...
         Starting Set console font and keymap...
[  OK  ] Started Create Volatile Files and Directories.
[  OK  ] Started Preprocess NFS configuration.
[  OK  ] Started Set console font and keymap.
         Starting NFSv4 ID-name mapping service...
[  OK  ] Reached target NFS client services.
         Starting RPC bind portmap service...
         Starting Update UTMP about System Boot/Shutdown...
         Starting Network Time Synchronization...
         Starting Network Name Resolution...
[  OK  ] Started NFSv4 ID-name mapping service.
[  OK  ] Started Raise network interfaces.
[  OK  ] Started RPC bind portmap service.
[  OK  ] Reached target RPC Port Mapper.
[    9.798370] rockchip-pcie f8000000.pcie: PCIe link training gen1 timeout!
[  OK  ] Started Update UTMP about System Boot/Shutdown.
[  OK  ] Started Network Time Synchronization.
[  OK  ] Reached target System Initialization.
[  OK  ] Listening on D-Bus System Message Bus Socket.
[  OK  ] Reached target Sockets.
[  OK  ] Started Discard unused blocks once a week.
[  OK  ] Started Daily apt download activities.
[  OK  ] Started Daily apt upgrade and clean activities.
[  OK  ] Started resolvconf-pull-resolved.path.
[  OK  ] Reached target Paths.
[  OK  ] Reached target Basic System.
         Starting System Logging Service...
         Starting Dispatcher daemon for systemd-networkd...
         Starting Resets System Activity Data Collector...
         Starting Login Service...
[  OK  ] Started Regular background program processing daemon.
[  OK  ] Started ntp-systemd-netif.service.
         Starting resolvconf-pull-resolved.service...
         Starting Rock 64 First boot...
[  OK  ] Started Daily Cleanup of Temporary Directories.
[  OK  ] Started D-Bus System Message Bus.
         Starting Network Manager...
         Starting WPA supplicant...
[  OK  ] Started Message of the Day.
[  OK  ] Reached target Timers.
         Starting Initializes zram swaping...
[  OK  ] Started Set the CPU Frequency Scaling governor.
         Starting Generate SSH keys if not there...
[  OK  ] Started Network Name Resolution.
[  OK  ] Started System Logging Service.
[  OK  ] Started Resets System Activity Data Collector.
[  OK  ] Started resolvconf-pull-resolved.service.
[  OK  ] Started Rock 64 First boot.
[FAILED] Failed to start Initializes zram swaping.
See 'systemctl status zram-config.service' for details.
[  OK  ] Started Login Service.
[  OK  ] Reached target Host and Network Name Lookups.
[  OK  ] Started WPA supplicant.
[  OK  ] Started Generate SSH keys if not there.
         Starting Hostname Service...
[  OK  ] Started Hostname Service.
[  OK  ] Started Network Manager.
         Starting Network Manager Script Dispatcher Service...
[  OK  ] Reached target Network.
         Starting Daily apt download activities...
         Starting OpenBSD Secure Shell server...
         Starting NFS Mount Daemon...
[  OK  ] Started Network Manager Script Dispatcher Service.
[  OK  ] Started Dispatcher daemon for systemd-networkd.
[  OK  ] Started NFS Mount Daemon.
         Starting NFS server and services...
[  OK  ] Started OpenBSD Secure Shell server.
[  OK  ] Started NFS server and services.
[  OK  ] Reached target Remote File Systems (Pre).
[  OK  ] Reached target Remote File Systems.
         Starting Permit User Sessions...
[  OK  ] Started Permit User Sessions.
[  OK  ] Started Serial Getty on ttyS2.
         Starting Set console scheme...
[  OK  ] Started Set console scheme.
         Starting Authorization Manager...
[  OK  ] Created slice system-getty.slice.
[  OK  ] Started Getty on tty1.
[  OK  ] Reached target Login Prompts.
[  OK  ] Reached target Multi-User System.
[  OK  ] Reached target Graphical Interface.
         Starting Update UTMP about System Runlevel Changes...
[  OK  ] Started Authorization Manager.
[  OK  ] Started Update UTMP about System Runlevel Changes.
         Starting resolvconf-pull-resolved.service...
[  OK  ] Started resolvconf-pull-resolved.service.



Ubuntu 18.04.1 LTS rockpro64v_2_1 ttyS2

rockpro64v_2_1 login: