Guest User

Log del kernel hg556a openwrt

a guest
Mar 21st, 2012
164
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. LOG DEL KERNEL
  2.  
  3. fixup: Writing 0x002a168c to register 0x5000
  4. [ 0.112000] pci-ath9k-fixup: Writing 0x02800001 to register 0x5008
  5. [ 0.116000] pci-ath9k-fixup: Writing 0x2091168c to register 0x502c
  6. [ 0.120000] pci-ath9k-fixup: Writing 0x05040cc0 to register 0x5064
  7. [ 0.124000] pci-ath9k-fixup: Writing 0x00033811 to register 0x506c
  8. [ 0.128000] pci-ath9k-fixup: Writing 0x0040073b to register 0x4004
  9. [ 0.132000] pci-ath9k-fixup: Writing 0x00000003 to register 0x4074
  10. [ 0.136000] pci-ath9k-fixup: Writing 0x01c20000 to register 0x4000
  11. [ 0.140000] pci-ath9k-fixup: Writing 0x00000044 to register 0x6034
  12. [ 0.144000] pci-ath9k-fixup: Device vendor 0x168c, id 0x0029
  13. [ 0.148000] pci 0000:00:01.0: reg 10: [mem 0x00000000-0x0000ffff]
  14. [ 0.160000] pci 0000:00:01.0: PME# supported from D0 D3hot
  15. [ 0.160000] pci 0000:00:01.0: PME# disabled
  16. [ 0.164000] pci 0000:00:01.0: BAR 0: assigned [mem 0x30000000-0x3000ffff]
  17. [ 0.168000] pci 0000:00:01.0: BAR 0: set to [mem 0x30000000-0x3000ffff] (PCI address
  18.  
  19. [0x30000000-0x3000ffff])
  20. [ 0.172000] Switching to clocksource MIPS
  21. [ 0.184000] NET: Registered protocol family 2
  22. [ 0.188000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
  23. [ 0.196000] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
  24. [ 0.204000] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
  25. [ 0.212000] TCP: Hash tables configured (established 2048 bind 2048)
  26. [ 0.220000] TCP reno registered
  27. [ 0.220000] UDP hash table entries: 256 (order: 0, 4096 bytes)
  28. [ 0.228000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  29. [ 0.236000] NET: Registered protocol family 1
  30. [ 0.240000] PCI: CLS 0 bytes, default 32
  31. [ 0.244000] audit: initializing netlink socket (disabled)
  32. [ 0.248000] type=2000 audit(0.248:1): initialized
  33. [ 0.256000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  34. [ 0.264000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c)
  35.  
  36. 2001-2006 Red Hat, Inc.
  37. [ 0.276000] msgmni has been set to 121
  38. [ 0.280000] io scheduler noop registered
  39. [ 0.284000] io scheduler deadline registered (default)
  40. [ 0.288000] bcm63xx_uart.0: ttyS0 at MMIO 0xfffe0100 (irq = 10) is a bcm63xx_uart
  41. [ 0.296000] console [ttyS0] enabled, bootconsole disabled
  42. [ 0.312000] bcm963xx-flash bcm963xx-flash.0: 0x02000000 at 0x1e000000
  43. [ 0.320000] bcm963xx: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x0000c2
  44.  
  45. Chip ID 0x00227e
  46. [ 0.332000] bcm963xx: Found an alias at 0x1000000 for the chip at 0x0
  47. [ 0.332000] Amd/Fujitsu Extended Query Table at 0x0040
  48. [ 0.336000] Amd/Fujitsu Extended Query version 1.3.
  49. [ 0.340000] number of CFI chips: 1
  50. [ 0.344000] bcm963xx_flash: Read Signature value of CFE1CFE1
  51. [ 0.352000] bcm963xx-flash bcm963xx-flash.0: CFE bootloader detected
  52. [ 0.356000] bcm963xx_flash: CFE boot tag found with version 8 and board type HW556
  53. [ 0.364000] bcm963xx_flash: Partition 0 is CFE offset 0 and length 20000
  54. [ 0.372000] bcm963xx_flash: Partition 1 is kernel offset 20100 and length fff00
  55. [ 0.380000] bcm963xx_flash: Partition 2 is rootfs offset 120000 and length ce0000
  56. [ 0.388000] bcm963xx_flash: Partition 3 is ath_data offset e00000 and length 1e0000
  57. [ 0.396000] bcm963xx_flash: Partition 4 is nvram offset fe0000 and length 20000
  58. [ 0.404000] bcm963xx_flash: Partition 5 is linux offset 20000 and length de0000
  59. [ 0.408000] bcm963xx_flash: Spare partition is 720000 offset and length 6e0000
  60. [ 0.416000] Creating 6 MTD partitions on "bcm963xx":
  61. [ 0.424000] 0x000000000000-0x000000020000 : "CFE"
  62. [ 0.432000] 0x000000020100-0x000000120000 : "kernel"
  63. [ 0.436000] mtd: partition "kernel" must either start or end on erase block boundary or
  64.  
  65. be smaller than an erase block -- forcing read-only
  66. [ 0.452000] 0x000000120000-0x000000e00000 : "rootfs"
  67. [ 0.464000] mtd: partition "rootfs" set to be root filesystem
  68. [ 0.468000] split_squashfs: no squashfs found in "bcm963xx"
  69. [ 0.472000] 0x000000e00000-0x000000fe0000 : "ath_data"
  70. [ 0.484000] 0x000000fe0000-0x000001000000 : "nvram"
  71. [ 0.492000] 0x000000020000-0x000000e00000 : "linux"
  72. [ 0.508000] bcm63xx-wdt bcm63xx-wdt.0: started, timer margin: 30 sec
  73. [ 0.516000] Registered led device: message
  74. [ 0.516000] Registered led device: hspa
  75. [ 0.516000] Registered led device: dsl
  76. [ 0.520000] Registered led device: power
  77. [ 0.520000] Registered led device: all_leds
  78. [ 0.520000] TCP westwood registered
  79. [ 0.524000] NET: Registered protocol family 17
  80. [ 0.528000] 802.1Q VLAN Support v1.8
  81. [ 0.556000] CLEANMARKER node found at 0x00010000, not first node in block (0x00000000)
  82. [ 0.592000] CLEANMARKER node found at 0x00030000, not first node in block (0x00020000)
  83. [ 0.632000] CLEANMARKER node found at 0x00050000, not first node in block (0x00040000)
  84. [ 0.676000] Empty flash at 0x0006ff88 ends at 0x00070000
  85. [ 0.680000] CLEANMARKER node found at 0x00070000, not first node in block (0x00060000)
  86. [ 0.720000] CLEANMARKER node found at 0x00090000, not first node in block (0x00080000)
  87. [ 0.756000] CLEANMARKER node found at 0x000b0000, not first node in block (0x000a0000)
  88. [ 0.796000] Empty flash at 0x000cff4c ends at 0x000d0000
  89. [ 0.800000] CLEANMARKER node found at 0x000d0000, not first node in block (0x000c0000)
  90. [ 0.836000] CLEANMARKER node found at 0x000f0000, not first node in block (0x000e0000)
  91. [ 0.876000] CLEANMARKER node found at 0x00110000, not first node in block (0x00100000)
  92. [ 0.916000] CLEANMARKER node found at 0x00130000, not first node in block (0x00120000)
  93. [ 0.952000] CLEANMARKER node found at 0x00150000, not first node in block (0x00140000)
  94. [ 0.992000] CLEANMARKER node found at 0x00170000, not first node in block (0x00160000)
  95. [ 1.028000] CLEANMARKER node found at 0x00190000, not first node in block (0x00180000)
  96. [ 1.064000] CLEANMARKER node found at 0x001b0000, not first node in block (0x001a0000)
  97. [ 1.104000] Empty flash at 0x001cffa0 ends at 0x001d0000
  98. [ 1.108000] CLEANMARKER node found at 0x001d0000, not first node in block (0x001c0000)
  99. [ 1.148000] CLEANMARKER node found at 0x001f0000, not first node in block (0x001e0000)
  100. [ 1.188000] CLEANMARKER node found at 0x00210000, not first node in block (0x00200000)
  101. [ 1.228000] Empty flash at 0x0022ffec ends at 0x00230000
  102. [ 1.236000] CLEANMARKER node found at 0x00230000, not first node in block (0x00220000)
  103. [ 1.276000] CLEANMARKER node found at 0x00250000, not first node in block (0x00240000)
  104. [ 1.312000] CLEANMARKER node found at 0x00270000, not first node in block (0x00260000)
  105. [ 1.348000] CLEANMARKER node found at 0x00290000, not first node in block (0x00280000)
  106. [ 1.388000] CLEANMARKER node found at 0x002b0000, not first node in block (0x002a0000)
  107. [ 1.424000] CLEANMARKER node found at 0x002d0000, not first node in block (0x002c0000)
  108. [ 1.460000] CLEANMARKER node found at 0x002f0000, not first node in block (0x002e0000)
  109. [ 1.500000] CLEANMARKER node found at 0x00310000, not first node in block (0x00300000)
  110. [ 1.536000] Empty flash at 0x0032ff48 ends at 0x00330000
  111. [ 1.544000] CLEANMARKER node found at 0x00330000, not first node in block (0x00320000)
  112. [ 1.580000] CLEANMARKER node found at 0x00350000, not first node in block (0x00340000)
  113. [ 1.620000] CLEANMARKER node found at 0x00370000, not first node in block (0x00360000)
  114. [ 1.656000] CLEANMARKER node found at 0x00390000, not first node in block (0x00380000)
  115. [ 1.692000] CLEANMARKER node found at 0x003b0000, not first node in block (0x003a0000)
  116. [ 1.728000] CLEANMARKER node found at 0x003d0000, not first node in block (0x003c0000)
  117. [ 1.768000] CLEANMARKER node found at 0x003f0000, not first node in block (0x003e0000)
  118. [ 1.808000] Empty flash at 0x0040ffa0 ends at 0x00410000
  119. [ 1.812000] CLEANMARKER node found at 0x00410000, not first node in block (0x00400000)
  120. [ 1.852000] CLEANMARKER node found at 0x00430000, not first node in block (0x00420000)
  121. [ 1.892000] Empty flash at 0x0044ff8c ends at 0x00450000
  122. [ 1.900000] CLEANMARKER node found at 0x00450000, not first node in block (0x00440000)
  123. [ 1.940000] Empty flash at 0x0046ff7c ends at 0x00470000
  124. [ 1.944000] CLEANMARKER node found at 0x00470000, not first node in block (0x00460000)
  125. [ 1.996000] CLEANMARKER node found at 0x00490000, not first node in block (0x00480000)
  126. [ 2.036000] CLEANMARKER node found at 0x004b0000, not first node in block (0x004a0000)
  127. [ 2.076000] CLEANMARKER node found at 0x004d0000, not first node in block (0x004c0000)
  128. [ 2.116000] CLEANMARKER node found at 0x004f0000, not first node in block (0x004e0000)
  129. [ 2.152000] CLEANMARKER node found at 0x00510000, not first node in block (0x00500000)
  130. [ 2.192000] CLEANMARKER node found at 0x00530000, not first node in block (0x00520000)
  131. [ 2.232000] CLEANMARKER node found at 0x00550000, not first node in block (0x00540000)
  132. [ 2.268000] CLEANMARKER node found at 0x00570000, not first node in block (0x00560000)
  133. [ 2.308000] CLEANMARKER node found at 0x00590000, not first node in block (0x00580000)
  134. [ 2.348000] Empty flash at 0x005affd4 ends at 0x005b0000
  135. [ 2.356000] CLEANMARKER node found at 0x005b0000, not first node in block (0x005a0000)
  136. [ 2.388000] JFFS2 notice: (1) jffs2_build_xattr_subsystem: complete building xattr
  137.  
  138. subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
  139. [ 2.404000] VFS: Mounted root (jffs2 filesystem) readonly on device 31:2.
  140. [ 2.416000] Freeing unused kernel memory: 172k freed
  141. [ 5.388000] roboswitch: Probing device eth0: found a 5325! It's a 5350.
  142. [ 6.452000] There is already a switch registered on the device 'eth0'
  143. [ 11.440000] SCSI subsystem initialized
  144. [ 11.596000] usbcore: registered new interface driver usbfs
  145. [ 11.604000] usbcore: registered new interface driver hub
  146. [ 11.612000] usbcore: registered new device driver usb
  147. [ 12.144000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  148. [ 12.152000] bcm63xx_ehci bcm63xx_ehci.0: BCM63XX integrated EHCI controller
  149. [ 12.160000] bcm63xx_ehci bcm63xx_ehci.0: new USB bus registered, assigned bus number 1
  150. [ 12.192000] bcm63xx_ehci bcm63xx_ehci.0: irq 18, io mem 0xfffe1300
  151. [ 12.208000] bcm63xx_ehci bcm63xx_ehci.0: USB 2.0 started, EHCI 1.00, overcurrent ignored
  152. [ 12.216000] hub 1-0:1.0: USB hub found
  153. [ 12.220000] hub 1-0:1.0: 2 ports detected
  154. [ 12.272000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  155. [ 12.280000] bcm63xx_ohci bcm63xx_ohci.0: BCM63XX integrated OHCI controller
  156. [ 12.288000] bcm63xx_ohci bcm63xx_ohci.0: new USB bus registered, assigned bus number 2
  157. [ 12.296000] bcm63xx_ohci bcm63xx_ohci.0: irq 13, io mem 0xfffe1400
  158. [ 12.360000] hub 2-0:1.0: USB hub found
  159. [ 12.364000] hub 2-0:1.0: 1 port detected
  160. [ 12.416000] uhci_hcd: USB Universal Host Controller Interface driver
  161. [ 12.488000] Initializing USB Mass Storage driver...
  162. [ 12.496000] usbcore: registered new interface driver usb-storage
  163. [ 12.500000] USB Mass Storage support registered.
  164. [ 12.536000] usb 1-1: new high speed USB device number 2 using bcm63xx_ehci
  165. [ 12.676000] hub 1-1:1.0: USB hub found
  166. [ 12.684000] hub 1-1:1.0: 2 ports detected
  167. [ 33.904000] Compat-wireless backport release: compat-wireless-2012-01-16-14-g02166d5
  168. [ 33.912000] Backport based on wireless-testing.git master-2012-02-06
  169. [ 34.108000] cfg80211: Calling CRDA to update world regulatory domain
  170. [ 34.376000] cfg80211: World regulatory domain updated:
  171. [ 34.380000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  172. [ 34.388000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  173. [ 34.396000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  174. [ 34.404000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  175. [ 34.412000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  176. [ 34.420000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  177. [ 34.552000] There is already a switch registered on the device 'eth0'
  178. [ 35.548000] PCI: Enabling device 0000:00:01.0 (0000 -> 0002)
  179. [ 35.556000] board_bcm963xx: Setting device platform data
  180. [ 35.572000] ath: eeprom contains invalid mac address: ff:ff:ff:ff:ff:ff
  181. [ 35.580000] ath: random mac address will be used: ee:20:c1:d8:79:47
  182. [ 35.588000] ath: EEPROM regdomain: 0xff
  183. [ 35.588000] ath: EEPROM indicates we should expect a direct regpair map
  184. [ 35.588000] ath: Country alpha2 being used: JP
  185. [ 35.588000] ath: Regpair used: 0xff
  186. [ 35.596000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
  187. [ 35.596000] Registered led device: ath9k-phy0
  188. [ 35.596000] ieee80211 phy0: Atheros AR9280 Rev:2 mem=0xc0ea0000, irq=39
  189. [ 35.608000] cfg80211: Calling CRDA for country: JP
  190. [ 35.672000] Button Hotplug driver version 0.4.1
  191. [ 35.768000] cfg80211: Regulatory domain changed to country: JP
  192. [ 35.772000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  193. [ 35.780000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
  194. [ 35.788000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (N/A, 2000 mBm)
  195. [ 35.796000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
  196. [ 35.804000] cfg80211: (4910000 KHz - 4930000 KHz @ 10000 KHz), (N/A, 2300 mBm)
  197. [ 35.812000] cfg80211: (4910000 KHz - 4990000 KHz @ 40000 KHz), (N/A, 2300 mBm)
  198. [ 35.820000] cfg80211: (4930000 KHz - 4950000 KHz @ 10000 KHz), (N/A, 2300 mBm)
  199. [ 35.828000] cfg80211: (5030000 KHz - 5045000 KHz @ 10000 KHz), (N/A, 2300 mBm)
  200. [ 35.836000] cfg80211: (5030000 KHz - 5090000 KHz @ 40000 KHz), (N/A, 2300 mBm)
  201. [ 35.844000] cfg80211: (5050000 KHz - 5060000 KHz @ 10000 KHz), (N/A, 2300 mBm)
  202. [ 35.852000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
  203. [ 35.860000] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
  204. [ 35.864000] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2300 mBm)
  205. [ 36.088000] NTFS driver 2.1.30 [Flags: R/O MODULE].
  206. [ 36.296000] PPP generic driver version 2.4.2
  207. [ 36.444000] ip_tables: (C) 2000-2006 Netfilter Core Team
  208. [ 36.728000] NET: Registered protocol family 24
  209. [ 36.908000] nf_conntrack version 0.5.0 (971 buckets, 3884 max)
  210. [ 37.660000] ath_hal: module license 'Proprietary' taints kernel.
  211. [ 37.664000] Disabling lock debugging due to kernel taint
  212. [ 37.688000] ath_hal: 2009-05-08 (AR5210, AR5211, AR5212, AR5416, RF5111, RF5112, RF2413,
  213.  
  214. RF5413, RF2133, RF2425, REGOPS_FUNC, XR)
  215. [ 38.072000] ath_pci: trunk
  216. [ 38.072000] wlan: trunk
  217. [ 38.076000] wlan: mac acl policy registered
  218. [ 38.080000] ath_rate_minstrel: Minstrel automatic rate control algorithm 1.2 (trunk)
  219. [ 38.088000] ath_rate_minstrel: look around rate set to 10%
  220. [ 38.092000] ath_rate_minstrel: EWMA rolloff level set to 75%
  221. [ 38.100000] ath_rate_minstrel: max segment size in the mrr set to 6000 us
  222. [ 38.204000] usbcore: registered new interface driver usblp
  223. [ 38.284000] input: gpio-buttons as /devices/platform/gpio-buttons.0/input/input0
  224. [ 38.392000] fuse init (API version 7.16)
  225. [ 40.880000] eth0: link forced UP - 100/full - flow control off/off
  226. [ 41.320000] device eth0 entered promiscuous mode
  227. [ 41.420000] br-lan: port 1(eth0) entering forwarding state
  228. [ 41.428000] br-lan: port 1(eth0) entering forwarding state
  229. [ 55.800000] device eth0 left promiscuous mode
  230. [ 55.804000] br-lan: port 1(eth0) entering forwarding state
  231. [ 56.568000] device eth0 entered promiscuous mode
  232. [ 56.572000] br-lan: port 1(eth0) entering forwarding state
  233. [ 56.580000] br-lan: port 1(eth0) entering forwarding state
RAW Paste Data