API tools faq
paste
Advertisement
uosiumen

WD30EFRX smart

uosiumen
Nov 18th, 2017
150
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 8.78 KB | None | 0 0
raw download clone embed print report
  1. # time smartctl -d sat --all /dev/sdc
  2. smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.10.0-37-generic] (local build)
  3. Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
  4.  
  5. === START OF INFORMATION SECTION ===
  6. Model Family: Western Digital Red
  7. Device Model: WDC WD30EFRX-68AX9N0
  8. Serial Number: WD-WMC1T2601208
  9. LU WWN Device Id: 5 0014ee 658849e8c
  10. Firmware Version: 80.00A80
  11. User Capacity: 3,000,592,982,016 bytes [3,00 TB]
  12. Sector Sizes: 512 bytes logical, 4096 bytes physical
  13. Device is: In smartctl database [for details use: -P show]
  14. ATA Version is: ACS-2 (minor revision not indicated)
  15. SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
  16. Local Time is: Sat Nov 18 11:12:45 2017 CET
  17. SMART support is: Available - device has SMART capability.
  18. SMART support is: Enabled
  19.  
  20. === START OF READ SMART DATA SECTION ===
  21. SMART overall-health self-assessment test result: PASSED
  22.  
  23. General SMART Values:
  24. Offline data collection status: (0x00) Offline data collection activity
  25. was never started.
  26. Auto Offline Data Collection: Disabled.
  27. Self-test execution status: ( 0) The previous self-test routine completed
  28. without error or no self-test has ever
  29. been run.
  30. Total time to complete Offline
  31. data collection: (39900) seconds.
  32. Offline data collection
  33. capabilities: (0x7b) SMART execute Offline immediate.
  34. Auto Offline data collection on/off support.
  35. Suspend Offline collection upon new
  36. command.
  37. Offline surface scan supported.
  38. Self-test supported.
  39. Conveyance Self-test supported.
  40. Selective Self-test supported.
  41. SMART capabilities: (0x0003) Saves SMART data before entering
  42. power-saving mode.
  43. Supports SMART auto save timer.
  44. Error logging capability: (0x01) Error logging supported.
  45. General Purpose Logging supported.
  46. Short self-test routine
  47. recommended polling time: ( 2) minutes.
  48. Extended self-test routine
  49. recommended polling time: ( 400) minutes.
  50. Conveyance self-test routine
  51. recommended polling time: ( 5) minutes.
  52. SCT capabilities: (0x70bd) SCT Status supported.
  53. SCT Error Recovery Control supported.
  54. SCT Feature Control supported.
  55. SCT Data Table supported.
  56.  
  57. SMART Attributes Data Structure revision number: 16
  58. Vendor Specific SMART Attributes with Thresholds:
  59. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  60. 1 Raw_Read_Error_Rate 0x002f 200 199 051 Pre-fail Always - 46
  61. 3 Spin_Up_Time 0x0027 215 204 021 Pre-fail Always - 4208
  62. 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 11
  63. 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
  64. 7 Seek_Error_Rate 0x002e 001 001 000 Old_age Always - 65539
  65. 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 16
  66. 10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0
  67. 11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0
  68. 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 9
  69. 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 8
  70. 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 2
  71. 194 Temperature_Celsius 0x0022 114 109 000 Old_age Always - 36
  72. 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
  73. 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0
  74. 198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0
  75. 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
  76. 200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age Offline - 0
  77.  
  78. SMART Error Log Version: 1
  79. ATA Error Count: 7 (device log contains only the most recent five errors)
  80. CR = Command Register [HEX]
  81. FR = Features Register [HEX]
  82. SC = Sector Count Register [HEX]
  83. SN = Sector Number Register [HEX]
  84. CL = Cylinder Low Register [HEX]
  85. CH = Cylinder High Register [HEX]
  86. DH = Device/Head Register [HEX]
  87. DC = Device Command Register [HEX]
  88. ER = Error register [HEX]
  89. ST = Status register [HEX]
  90. Powered_Up_Time is measured from power on, and printed as
  91. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  92. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  93.  
  94. Error 7 occurred at disk power-on lifetime: 6 hours (0 days + 6 hours)
  95. When the command that caused the error occurred, the device was active or idle.
  96.  
  97. After command completion occurred, registers were:
  98. ER ST SC SN CL CH DH
  99. -- -- -- -- -- -- --
  100. 04 61 46 00 00 00 00 Device Fault; Error: ABRT
  101.  
  102. Commands leading to the command that caused the error were:
  103. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  104. -- -- -- -- -- -- -- -- ---------------- --------------------
  105. ef 03 46 00 00 00 00 00 03:30:48.018 SET FEATURES [Set transfer mode]
  106. ef 03 0c 00 00 00 00 00 03:30:48.017 SET FEATURES [Set transfer mode]
  107. ec 00 01 00 00 00 00 00 03:30:48.017 IDENTIFY DEVICE
  108. e5 00 00 00 00 00 00 00 03:30:48.014 CHECK POWER MODE
  109. e1 00 00 00 00 00 00 00 03:30:48.014 IDLE IMMEDIATE
  110.  
  111. Error 6 occurred at disk power-on lifetime: 6 hours (0 days + 6 hours)
  112. When the command that caused the error occurred, the device was active or idle.
  113.  
  114. After command completion occurred, registers were:
  115. ER ST SC SN CL CH DH
  116. -- -- -- -- -- -- --
  117. 04 61 0c 00 00 00 00 Device Fault; Error: ABRT
  118.  
  119. Commands leading to the command that caused the error were:
  120. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  121. -- -- -- -- -- -- -- -- ---------------- --------------------
  122. ef 03 0c 00 00 00 00 00 03:30:48.017 SET FEATURES [Set transfer mode]
  123. ec 00 01 00 00 00 00 00 03:30:48.017 IDENTIFY DEVICE
  124. e5 00 00 00 00 00 00 00 03:30:48.014 CHECK POWER MODE
  125. e1 00 00 00 00 00 00 00 03:30:48.014 IDLE IMMEDIATE
  126. e1 00 00 00 00 00 a0 00 03:30:47.923 IDLE IMMEDIATE
  127.  
  128. Error 5 occurred at disk power-on lifetime: 6 hours (0 days + 6 hours)
  129. When the command that caused the error occurred, the device was active or idle.
  130.  
  131. After command completion occurred, registers were:
  132. ER ST SC SN CL CH DH
  133. -- -- -- -- -- -- --
  134. 04 61 00 00 00 00 00
  135.  
  136. Commands leading to the command that caused the error were:
  137. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  138. -- -- -- -- -- -- -- -- ---------------- --------------------
  139. e1 00 00 00 00 00 00 00 03:30:48.014 IDLE IMMEDIATE
  140. e1 00 00 00 00 00 a0 00 03:30:47.923 IDLE IMMEDIATE
  141. e7 00 00 00 00 00 a0 00 03:30:47.922 FLUSH CACHE
  142. e5 00 00 00 00 00 a0 00 03:30:47.922 CHECK POWER MODE
  143.  
  144. Error 4 occurred at disk power-on lifetime: 6 hours (0 days + 6 hours)
  145. When the command that caused the error occurred, the device was active or idle.
  146.  
  147. After command completion occurred, registers were:
  148. ER ST SC SN CL CH DH
  149. -- -- -- -- -- -- --
  150. 04 61 00 00 00 00 a0
  151.  
  152. Commands leading to the command that caused the error were:
  153. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  154. -- -- -- -- -- -- -- -- ---------------- --------------------
  155. e1 00 00 00 00 00 a0 00 03:30:47.923 IDLE IMMEDIATE
  156. e7 00 00 00 00 00 a0 00 03:30:47.922 FLUSH CACHE
  157. e5 00 00 00 00 00 a0 00 03:30:47.922 CHECK POWER MODE
  158.  
  159. Error 3 occurred at disk power-on lifetime: 6 hours (0 days + 6 hours)
  160. When the command that caused the error occurred, the device was active or idle.
  161.  
  162. After command completion occurred, registers were:
  163. ER ST SC SN CL CH DH
  164. -- -- -- -- -- -- --
  165. 04 61 00 00 00 00 a0
  166.  
  167. Commands leading to the command that caused the error were:
  168. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  169. -- -- -- -- -- -- -- -- ---------------- --------------------
  170. e7 00 00 00 00 00 a0 00 03:30:47.922 FLUSH CACHE
  171. e5 00 00 00 00 00 a0 00 03:30:47.922 CHECK POWER MODE
  172.  
  173. SMART Self-test log structure revision number 1
  174. No self-tests have been logged. [To run self-tests, use: smartctl -t]
  175.  
  176. SMART Selective self-test log data structure revision number 1
  177. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  178. 1 0 0 Not_testing
  179. 2 0 0 Not_testing
  180. 3 0 0 Not_testing
  181. 4 0 0 Not_testing
  182. 5 0 0 Not_testing
  183. Selective self-test flags (0x0):
  184. After scanning selected spans, do NOT read-scan remainder of disk.
  185. If Selective self-test is pending on power-up, resume after 0 minute delay.
  186.  
  187.  
  188. real 0m4.845s
  189. user 0m0.020s
  190. sys 0m0.000s
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!