API tools faq
paste
machinaut

Freewrite Traveler Serial Boot Log

machinaut
Oct 18th, 2022
296
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 23.48 KB | None | 0 0
raw download clone embed print report
  1. U-Boot 2018.03 (Aug 14 2021 - 01:47:05 +0000)
  2.  
  3. CPU: Freescale i.MX6SLL rev1.1 996 MHz (running at 792 MHz)
  4. CPU: Commercial temperature grade (0C to 95C) at 39C
  5. Reset cause: POR
  6. Model: Astrohaus Freewrite Traveler
  7. Board: Freewrite Traveler
  8. DRAM: 512 MiB
  9. MMC: FSL_SDHC: 0
  10. Loading Environment from MMC... *** Warning - bad CRC, using default environment
  11.  
  12. Failed (-5)
  13. unsupported panel ED060XCDU2
  14. In: serial
  15. Out: serial
  16. Err: serial
  17. PMIC: DA9052 probed successfully.
  18. Detected 0 keys for recovery:
  19. flash target is MMC:0
  20. Net: CPU Net Initialization Failed
  21. No ethernet found.
  22. Fastboot: Normal
  23. Normal Boot
  24. Hit any key to stop autoboot: 0
  25. switch to partitions #0, OK
  26. mmc0(part 0) is current device
  27. 972 bytes read in 6 ms (158.2 KiB/s)
  28. Running bootscript from mmc ...
  29. ## Executing script at 80800000
  30. ** Unable to read file testjig **
  31. ** Unable to read file first **
  32. 5135404 bytes read in 92 ms (53.2 MiB/s)
  33. 29461 bytes read in 10 ms (2.8 MiB/s)
  34. Booting from mmc ...
  35. Kernel image @ 0x80800000 [ 0x000000 - 0x4e46b8 ]
  36. ## Flattened Device Tree blob at 83000000
  37. Booting using the fdt blob at 0x83000000
  38.  
  39. Authenticate image from DDR location 0x80800000...
  40.  
  41. Secure boot enabled
  42.  
  43. HAB Configuration: 0xcc, HAB State: 0x99
  44. No HAB Events Found!
  45.  
  46. Using Device Tree in place at 83000000, end 8300a314
  47.  
  48. Starting kernel ...
  49.  
  50. Booting Linux on physical CPU 0x0
  51. Linux version 4.14.98 (baker@215d51910113) (gcc version 8.3.0 (Buildroot 2019.08-git-00423-gbdb6c4007d)) #1 SMP PREEMPT Sat Aug 14 02:03:48 UTC 2021
  52. CPU: ARMv7 Processor [414fc091] revision 1 (ARMv7), cr=10c53c7d
  53. CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  54. OF: fdt: Machine model: Astrohaus Freewrite Traveler
  55. Memory policy: Data cache writeback
  56. CPU: All CPU(s) started in SVC mode.
  57. percpu: Embedded 16 pages/cpu @9fbd3000 s35532 r8192 d21812 u65536
  58. Built 1 zonelists, mobility grouping on. Total pages: 130048
  59. Kernel command line: console=ttymxc0,115200 epdc video=mxcepdcfb:ED060XCDU2,bpp=16 fbcon=rotate:2 clk_ignore_unused root=/dev/mmcblk1p4 rootwait rw
  60. PID hash table entries: 2048 (order: 1, 8192 bytes)
  61. Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  62. Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  63. Memory: 504496K/524288K available (7168K kernel code, 323K rwdata, 5240K rodata, 1024K init, 419K bss, 19792K reserved, 0K cma-reserved, 0K highmem)
  64. Virtual kernel memory layout:
  65. vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  66. fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
  67. vmalloc : 0xa0800000 - 0xff800000 (1520 MB)
  68. lowmem : 0x80000000 - 0xa0000000 ( 512 MB)
  69. pkmap : 0x7fe00000 - 0x80000000 ( 2 MB)
  70. modules : 0x7f000000 - 0x7fe00000 ( 14 MB)
  71. .text : 0x80008000 - 0x80800000 (8160 kB)
  72. .init : 0x80e00000 - 0x80f00000 (1024 kB)
  73. .data : 0x80f00000 - 0x80f50ec0 ( 324 kB)
  74. .bss : 0x80f52000 - 0x80fbac78 ( 420 kB)
  75. SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  76. Preemptible hierarchical RCU implementation.
  77. RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1.
  78. Tasks RCU enabled.
  79. RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
  80. NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
  81. L2C-310 erratum 769419 enabled
  82. L2C-310 enabling early BRESP for Cortex-A9
  83. L2C-310 full line of zeros enabled for Cortex-A9
  84. L2C-310 ID prefetch enabled, offset 16 lines
  85. L2C-310 dynamic clock gating enabled, standby mode enabled
  86. L2C-310 cache controller enabled, 16 ways, 256 kB
  87. L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76430001
  88. Switching to timer-based delay loop, resolution 333ns
  89. sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 715827882841ns
  90. clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns
  91. Console: colour dummy device 80x30
  92. Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=30000)
  93. pid_max: default: 32768 minimum: 301
  94. Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
  95. Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
  96. CPU: Testing write buffer coherency: ok
  97. CPU0: Spectre v2: using BPIALL workaround
  98. CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  99. Setting up static identity map for 0x80100000 - 0x80100060
  100. Hierarchical SRCU implementation.
  101. smp: Bringing up secondary CPUs ...
  102. smp: Brought up 1 node, 1 CPU
  103. SMP: Total of 1 processors activated (6.00 BogoMIPS).
  104. CPU: All CPU(s) started in SVC mode.
  105. devtmpfs: initialized
  106. random: get_random_u32 called from bucket_table_alloc+0x100/0x22c with crng_init=0
  107. VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
  108. clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  109. futex hash table entries: 256 (order: 2, 16384 bytes)
  110. pinctrl core: initialized pinctrl subsystem
  111. NET: Registered protocol family 16
  112. DMA: preallocated 256 KiB pool for atomic coherent allocations
  113. cpuidle: using governor menu
  114. vdd3p0: supplied by regulator-dummy
  115. mxs_phy 20ca000.usbphy: 20ca000.usbphy supply phy-3p0 not found, using dummy regulator
  116. hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
  117. hw-breakpoint: maximum watchpoint size is 4 bytes.
  118. imx6sll-pinctrl 20e0000.iomuxc: initialized IMX pinctrl driver
  119. imx rpmsg driver is registered.
  120. SCSI subsystem initialized
  121. usbcore: registered new interface driver usbfs
  122. usbcore: registered new interface driver hub
  123. usbcore: registered new device driver usb
  124. i2c i2c-0: IMX I2C adapter registered
  125. i2c i2c-0: can't use DMA, using PIO instead.
  126. tps6518x_probe calling
  127. tps6518x 1-0068: 1-0068 supply SENSOR not found, using dummy regulator
  128. tps6518x_detect calling
  129. tps6518x_detect success
  130. tps6518x 1-0068: PMIC TPS6518x for eInk display
  131. tps6518x_probe success
  132. i2c i2c-1: IMX I2C adapter registered
  133. i2c i2c-1: can't use DMA, using PIO instead.
  134. pps_core: LinuxPPS API ver. 1 registered
  135. pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
  136. PTP clock support registered
  137. MIPI CSI2 driver module loaded
  138. Timings xe4 x55 x1e xe0
  139. clocksource: Switched to clocksource mxc_timer1
  140. VFS: Disk quotas dquot_6.6.0
  141. VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  142. NET: Registered protocol family 2
  143. TCP established hash table entries: 4096 (order: 2, 16384 bytes)
  144. TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
  145. TCP: Hash tables configured (established 4096 bind 4096)
  146. UDP hash table entries: 256 (order: 1, 8192 bytes)
  147. UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
  148. NET: Registered protocol family 1
  149. Bus freq driver module loaded
  150. workingset: timestamp_bits=30 max_order=17 bucket_order=0
  151. io scheduler noop registered
  152. io scheduler deadline registered
  153. io scheduler cfq registered (default)
  154. io scheduler mq-deadline registered
  155. io scheduler kyber registered
  156. imx-sdma 20ec000.sdma: Falling back to user helper
  157. 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 19, base_baud = 5000000) is a IMX
  158. random: fast init done
  159. console [ttymxc0] enabled
  160. imx-rng 21b4000.rngb: iMX RNG Registered.
  161. imx sema4 driver is registered.
  162. brd: module loaded
  163. loop: module loaded
  164. spi_imx 2008000.ecspi: probed
  165. libphy: Fixed MDIO Bus: probed
  166. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  167. usbcore: registered new interface driver usb-storage
  168. usbmisc_imx 2184800.usbmisc: 2184800.usbmisc supply vbus-wakeup not found, using dummy regulator
  169. input: 20b8000.kpp as /devices/soc0/soc/2000000.aips-bus/20b8000.kpp/input/input0
  170. input: 20cc000.snvs:snvs-powerkey as /devices/soc0/soc/2000000.aips-bus/20cc000.snvs/20cc000.snvs:snvs-powerkey/input/input1
  171. input: da9052-onkey as /devices/soc0/soc/2100000.aips-bus/21a0000.i2c/i2c-0/0-0059/da9052-onkey.14.auto/input/input2
  172. snvs_rtc 20cc000.snvs:snvs-rtc-lp: rtc core: registered 20cc000.snvs:snvs-rtc-lp as rtc0
  173. i2c /dev entries driver
  174. (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
  175. bq27xxx-battery 1-0055: design-capacity has 4200
  176. bq27xxx-battery 1-0055: design-energy has 17640
  177. bq27xxx-battery 1-0055: terminate-voltage has 3000
  178. (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
  179. tps6518x_sensor_probe starting
  180. tps6518x_sensor tps6518x-sns: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
  181. tps6518x_sensor_probe success
  182. imx2-wdt 20bc000.wdog: timeout 60 sec (nowayout=0)
  183. sdhci: Secure Digital Host Controller Interface driver
  184. sdhci: Copyright(c) Pierre Ossman
  185. sdhci-pltfm: SDHCI platform and OF driver helper
  186. mmc1: SDHCI controller on 2194000.usdhc [2194000.usdhc] using ADMA
  187. da9052 0-0059: extcon_get_extcon_dev failed
  188. mmc2: SDHCI controller on 2198000.usdhc [2198000.usdhc] using ADMA
  189. ++++++++++++++++++++++++++++++++++++++++++++++++ apa1022020256_probe
  190. ... lock
  191. apa1022020256_set_brightness 3 0
  192. brightnessByte E0
  193. data[1]=E0000000
  194. ... unlock
  195. ... lock
  196. apa1022020256_set_brightness 0 150
  197. ColorByte 96, mask ffffff00
  198. Current data: E0000096
  199. ... unlock
  200. ... lock
  201. apa1022020256_set_brightness 1 255
  202. ColorByte FF, mask ffff00ff
  203. Current data: E000FF96
  204. ... unlock
  205. ... lock
  206. apa1022020256_set_brightness 2 200
  207. ColorByte C8, mask ff00ffff
  208. Current data: E0C8FF96
  209. ... unlock
  210. ... lock
  211. apa1022020256_set_brightness 3 100
  212. mmc1: new HS400 MMC card at address 0001
  213. brightnessByte EC
  214. data[1]=ECC8FF96
  215. ... unlock
  216. da9052 0-0059: extcon_get_extcon_dev failed
  217. mmcblk1: mmc1:0001 EE4ED4 3.56 GiB
  218. mmcblk1boot0: mmc1:0001 EE4ED4 partition 1 2.00 MiB
  219. usbcore: registered new interface driver usbhid
  220. mmcblk1boot1: mmc1:0001 EE4ED4 partition 2 2.00 MiB
  221. usbhid: USB HID core driver
  222. mmcblk1rpmb: mmc1:0001 EE4ED4 partition 3 512 KiB
  223. mmcblk1: p1 p2 p3 p4 p5
  224. ptn5150 0-001d: timeout for waiting gpio becoming high
  225. NET: Registered protocol family 26
  226. NET: Registered protocol family 10
  227. Segment Routing with IPv6
  228. sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
  229. NET: Registered protocol family 17
  230. 8021q: 802.1Q VLAN Support v1.8
  231. Key type dns_resolver registered
  232. imx_epdc_v2_fb 20f4000.epdc: No qos phandle specified. Ignored.
  233. Console: switching to colour frame buffer device 128x47
  234. (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
  235. imx_thermal 2000000.aips-bus:tempmon: Commercial CPU temperature grade - max:95C critical:90C passive:85C
  236. input: gpio-keys as /devices/soc0/gpio-keys/input/input3
  237. snvs_rtc 20cc000.snvs:snvs-rtc-lp: setting system clock to 1970-01-01 00:00:01 UTC (1)
  238. clk: Not disabling unused clocks
  239. usb_otg1_vbus: disabling
  240. EXT4-fs (mmcblk1p4): mounted filesystem with ordered data mode. Opts: (null)
  241. VFS: Mounted root (ext4 filesystem) on device 179:4.
  242. devtmpfs: mounted
  243. Freeing unused kernel memory: 1024K
  244. systemd[1]: System time before build time, advancing clock.
  245. systemd[1]: Failed to find module 'autofs4'
  246. systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
  247. systemd[1]: Detected architecture arm.
  248.  
  249. Welcome to \x1B[1mDebian GNU/Linux 10 (buster)\x1B[0m!
  250.  
  251. systemd[1]: Set hostname to <59a421b8d32c1d7>.
  252. systemd[1]: File /lib/systemd/system/systemd-journald.service:12 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling.
  253. systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.)
  254. random: systemd: uninitialized urandom read (16 bytes read)
  255. random: systemd: uninitialized urandom read (16 bytes read)
  256. systemd[1]: Listening on udev Kernel Socket.
  257. [\x1B[0;32m OK \x1B[0m] Listening on \x1B[0;1;39mudev Kernel Socket\x1B[0m.
  258. random: systemd: uninitialized urandom read (16 bytes read)
  259. systemd[1]: Listening on Journal Socket (/dev/log).
  260. [\x1B[0;32m OK \x1B[0m] Listening on \x1B[0;1;39mJournal Socket (/dev/log)\x1B[0m.
  261. systemd[1]: Reached target Remote File Systems.
  262. [\x1B[0;32m OK \x1B[0m] Reached target \x1B[0;1;39mRemote File Systems\x1B[0m.
  263. systemd[1]: Reached target Swap.
  264. [\x1B[0;32m OK \x1B[0m] Reached target \x1B[0;1;39mSwap\x1B[0m.
  265. systemd[1]: Listening on initctl Compatibility Named Pipe.
  266. [\x1B[0;32m OK \x1B[0m] Listening on \x1B[0;1;39minitctl Compatibility Named Pipe\x1B[0m.
  267. [\x1B[0;32m OK \x1B[0m] Listening on \x1B[0;1;39mudev Control Socket\x1B[0m.
  268. [\x1B[0;1;33mUNSUPP\x1B[0m] Starting of \x1B[0;1;39mArbitrary Exec\xE2\x80\xA6Automount Point\x1B[0m not supported.
  269. [\x1B[0;32m OK \x1B[0m] Listening on \x1B[0;1;39mJournal Socket\x1B[0m.
  270. Starting \x1B[0;1;39mudev Coldplug all Devices\x1B[0m...
  271. [\x1B[0;32m OK \x1B[0m] Started \x1B[0;1;39mDispatch Password \xE2\x80\xA6ts to Console Directory Watch\x1B[0m.
  272. [\x1B[0;32m OK \x1B[0m] Started \x1B[0;1;39mForward Password R\xE2\x80\xA6uests to Wall Directory Watch\x1B[0m.
  273. [\x1B[0;32m OK \x1B[0m] Reached target \x1B[0;1;39mLocal Encrypted Volumes\x1B[0m.
  274. Starting \x1B[0;1;39mJournal Service\x1B[0m...
  275. Starting \x1B[0;1;39mLoad Kernel Modules\x1B[0m...
  276. Starting \x1B[0;1;39mLoad/Save Random Seed\x1B[0m...
  277. [\x1B[0;32m OK \x1B[0m] Created slice \x1B[0;1;39msystem-postgresql.slice\x1B[0m.
  278. [\x1B[0;32m OK \x1B[0m] Created slice \x1B[0;1;39mUser and Session Slice\x1B[0m.
  279. [\x1B[0;32m OK \x1B[0m] Reached target \x1B[0;1;39mSlices\x1B[0m.
  280. [\x1B[0;32m OK \x1B[0m] Reached target \x1B[0;1;39mPaths\x1B[0m.
  281. Starting \x1B[0;1;39mCreate System Users\x1B[0m...
  282. [\x1B[0;32m OK \x1B[0m] Created slice \x1B[0;1;39msystem-getty.slice\x1B[0m.
  283. Mounting \x1B[0;1;39mKernel Debug File System\x1B[0m...
  284. [\x1B[0;32m OK \x1B[0m] Started \x1B[0;1;39mLoad Kernel Modules\x1B[0m.
  285. [\x1B[0;32m OK \x1B[0m] Started \x1B[0;1;39mJournal Service\x1B[0m.
  286. [\x1B[0;32m OK \x1B[0m] Started \x1B[0;1;39mLoad/Save Random Seed\x1B[0m.
  287. [\x1B[0;32m OK \x1B[0m] Started \x1B[0;1;39mCreate System Users\x1B[0m.
  288. [\x1B[0;32m OK \x1B[0m] Mounted \x1B[0;1;39mKernel Debug File System\x1B[0m.
  289. Starting \x1B[0;1;39mCreate Static Device Nodes in /dev\x1B[0m...
  290. Starting \x1B[0;1;39mFlush Journal to Persistent Storage\x1B[0m...
  291. Mounting \x1B[0;1;39mKernel Configuration File System\x1B[0m...
  292. Starting \x1B[0;1;39mApply Kernel Variables\x1B[0m...
  293. [\x1B[0;32m OK \x1B[0m] Mounted \x1B[0;1;39mKernel Configuration File System\x1B[0m.
  294. [\x1B[0;32m OK \x1B[0m] Started \x1B[0;1;39mCreate Static Device Nodes in /dev\x1B[0m.
  295. systemd-journald[125]: Received request to flush runtime journal from PID 1
  296. [\x1B[0;32m OK \x1B[0m] Reached target \x1B[0;1;39mLocal File Systems (Pre)\x1B[0m.
  297. [\x1B[0;32m OK \x1B[0m] Reached target \x1B[0;1;39mLocal File Systems\x1B[0m.
  298. Starting \x1B[0;1;39mXorg servers\x1B[0m...
  299. Starting \x1B[0;1;39mudev Kernel Device Manager\x1B[0m...
  300. [\x1B[0;32m OK \x1B[0m] Started \x1B[0;1;39mFlush Journal to Persistent Storage\x1B[0m.
  301. [\x1B[0;32m OK \x1B[0m] Started \x1B[0;1;39mApply Kernel Variables\x1B[0m.
  302. Starting \x1B[0;1;39mCreate Volatile Files and Directories\x1B[0m...
  303. [\x1B[0;32m OK \x1B[0m] Started \x1B[0;1;39mudev Coldplug all Devices\x1B[0m.
  304. Starting \x1B[0;1;39mHelper to synchronize boot up for ifupdown\x1B[0m...
  305. [\x1B[0;32m OK \x1B[0m] Started \x1B[0;1;39mudev Kernel Device Manager\x1B[0m.
  306. [\x1B[0;32m OK \x1B[0m] Started \x1B[0;1;39mCreate Volatile Files and Directories\x1B[0m.
  307. Starting \x1B[0;1;39mUpdate UTMP about System Boot/Shutdown\x1B[0m...
  308. Starting \x1B[0;1;39mNetwork Time Synchronization\x1B[0m...
  309. [\x1B[0;32m OK \x1B[0m] Started \x1B[0;1;39mUpdate UTMP about System Boot/Shutdown\x1B[0m.
  310. imx-sdma 20ec000.sdma: external firmware not found, using ROM firmware
  311. [\x1B[0;32m OK \x1B[0m] Started \x1B[0;1;39mNetwork Time Synchronization\x1B[0m.
  312. [\x1B[0;32m OK \x1B[0m] Reached target \x1B[0;1;39mSystem Time Synchronized\x1B[0m.
  313. [\x1B[0;32m OK \x1B[0m] Reached target \x1B[0;1;39mSystem Initialization\x1B[0m.
  314. [\x1B[0;32m OK \x1B[0m] Listening on \x1B[0;1;39mD-Bus System Message Bus Socket\x1B[0m.
  315. [\x1B[0;32m OK \x1B[0m] Reached target \x1B[0;1;39mSockets\x1B[0m.
  316. [\x1B[0;32m OK \x1B[0m] Started \x1B[0;1;39mDaily apt download activities\x1B[0m.
  317. [\x1B[0;32m OK \x1B[0m] Started \x1B[0;1;39mFOTA poll timer\x1B[0m.
  318. [\x1B[0;32m OK \x1B[0m] Reached target \x1B[0;1;39mBasic System\x1B[0m.
  319. Starting \x1B[0;1;39muim environment initialization\x1B[0m...
  320. Starting \x1B[0;1;39mLogin Service\x1B[0m...
  321. [\x1B[0;32m OK \x1B[0m] Started \x1B[0;1;39mD-Bus System Message Bus\x1B[0m.
  322. Starting \x1B[0;1;39mWPA supplicant\x1B[0m...
  323. [\x1B[0;32m OK \x1B[0m] Started \x1B[0;1;39mhighgate daemon\x1B[0m.
  324. [\x1B[0;32m OK \x1B[0m] Started \x1B[0;1;39mDaily rotation of log files\x1B[0m.
  325. [\x1B[0;32m OK \x1B[0m] Started \x1B[0;1;39mDaily Cleanup of Temporary Directories\x1B[0m.
  326. [\x1B[0;32m OK \x1B[0m] Started \x1B[0;1;39mDaily apt upgrade and clean activities\x1B[0m.
  327. [\x1B[0;32m OK \x1B[0m] Reached target \x1B[0;1;39mTimers\x1B[0m.
  328. [\x1B[0;32m OK \x1B[0m] Started \x1B[0;1;39mHelper to synchronize boot up for ifupdown\x1B[0m.
  329. [\x1B[0;32m OK \x1B[0m] Found device \x1B[0;1;39m/dev/mmcblk1p5\x1B[0m.
  330. [\x1B[0;32m OK \x1B[0m] Found device \x1B[0;1;39m/dev/mmcblk1boot1\x1B[0m.
  331. [\x1B[0;32m OK \x1B[0m] Started \x1B[0;1;39muim environment initialization\x1B[0m.
  332. Mounting \x1B[0;1;39mAST readonly part\xE2\x80\xA6for EPD voltage and similar\x1B[0m...
  333. EXT4-fs (mmcblk1boot1): mounting ext3 file system using the ext4 subsystem
  334. Mounting \x1B[0;1;39mAST data partition\x1B[0m...
  335. Starting \x1B[0;1;39mRaise network interfaces\x1B[0m...
  336. EXT4-fs: Warning: mounting with data=journal disables delayed allocation and O_DIRECT support!
  337. EXT4-fs (mmcblk1boot1): mounted filesystem without journal. Opts: noload
  338. [\x1B[0;32m OK \x1B[0m] Started \x1B[0;1;39mLogin Service\x1B[0m.
  339. EXT4-fs (mmcblk1p5): mounted filesystem with journalled data mode. Opts: data=journal,barrier=1
  340. [\x1B[0;32m OK \x1B[0m] Started \x1B[0;1;39mWPA supplicant\x1B[0m.
  341. [\x1B[0;32m OK \x1B[0m] Mounted \x1B[0;1;39mAST readonly parti\xE2\x80\xA6n for EPD voltage and similar\x1B[0m.
  342. [\x1B[0;32m OK \x1B[0m] Mounted \x1B[0;1;39mAST data partition\x1B[0m.
  343. Activating swap \x1B[0;1;39mAST data swapfile\x1B[0m...
  344. Adding 102396k swap on /data/swap. Priority:-2 extents:4 across:114112k SS
  345. [\x1B[0;32m OK \x1B[0m] Activated swap \x1B[0;1;39mAST data swapfile\x1B[0m.
  346. [\x1B[0;1;31mFAILED\x1B[0m] Failed to start \x1B[0;1;39mRaise network interfaces\x1B[0m.
  347. See 'systemctl status networking.service' for details.
  348. [\x1B[0;32m OK \x1B[0m] Started \x1B[0;1;39mXorg servers\x1B[0m.
  349. [\x1B[0;32m OK \x1B[0m] Started \x1B[0;1;39mepaper daemon\x1B[0m.
  350. Starting \x1B[0;1;39mbaker-powerd\x1B[0m...
  351. [\x1B[0;32m OK \x1B[0m] Started \x1B[0;1;39muim daemon\x1B[0m.
  352. using random self ethernet address
  353. using random host ethernet address
  354. usb0: HOST MAC 7e:9d:da:49:5d:ac
  355. usb0: MAC c6:e3:35:05:28:6d
  356. using random self ethernet address
  357. using random host ethernet address
  358. g_ether gadget: Ethernet Gadget, version: Memorial Day 2008
  359. g_ether gadget: g_ether ready
  360. [\x1B[0;32m OK \x1B[0m] Started \x1B[0;1;39mbaker-powerd\x1B[0m.
  361. Starting \x1B[0;1;39mFreewrite application\x1B[0m...
  362. Starting \x1B[0;1;39mNetwork Manager\x1B[0m...
  363. ... lock
  364. apa1022020256_set_brightness 1 180
  365. ColorByte B4, mask ffff00ff
  366. Current data: ECC8B496
  367. ... unlock
  368. ... lock
  369. apa1022020256_set_brightness 2 255
  370. ColorByte FF, mask ff00ffff
  371. Current data: ECFFB496
  372. ... unlock
  373. ... lock
  374. apa1022020256_set_brightness 0 200
  375. ColorByte C8, mask ffffff00
  376. Current data: ECFFB4C8
  377. ... unlock
  378. ... lock
  379. apa1022020256_set_brightness 3 10
  380. brightnessByte E1
  381. data[1]=E1FFB4C8
  382. [\x1B[0;32m OK \x1B[0m] Found device \x1B[0;1;39m/sys/subsystem/net/devices/usb0\x1B[0m.
  383. [\x1B[0;32m OK \x1B[0m] Started \x1B[0;1;39mifup for usb0\x1B[0m.
  384. [\x1B[0;32m OK \x1B[0m] Started \x1B[0;1;39mNetwork Manager\x1B[0m.
  385. Starting \x1B[0;1;39mNetwork Manager Wait Online\x1B[0m...
  386. ... unlock
  387. IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready
  388. [\x1B[0;32m OK \x1B[0m] Reached target \x1B[0;1;39mNetwork\x1B[0m.
  389. Starting \x1B[0;1;39mPostgreSQL Cluster 11-ast_v1\x1B[0m...
  390. Starting \x1B[0;1;39mOpenBSD Secure Shell server\x1B[0m...
  391. Starting \x1B[0;1;39mPermit User Sessions\x1B[0m...
  392. Starting \x1B[0;1;39mHostname Service\x1B[0m...
  393. [\x1B[0;32m OK \x1B[0m] Started \x1B[0;1;39mPermit User Sessions\x1B[0m.
  394. [\x1B[0;32m OK \x1B[0m] Started \x1B[0;1;39mGetty on tty1\x1B[0m.
  395. [\x1B[0;32m OK \x1B[0m] Reached target \x1B[0;1;39mLogin Prompts\x1B[0m.
  396. random: crng init done
  397. random: 7 urandom warning(s) missed due to ratelimiting
  398. [\x1B[0;32m OK \x1B[0m] Started \x1B[0;1;39mHostname Service\x1B[0m.
  399. Starting \x1B[0;1;39mNetwork Manager Script Dispatcher Service\x1B[0m...
  400. [\x1B[0;32m OK \x1B[0m] Started \x1B[0;1;39mOpenBSD Secure Shell server\x1B[0m.
  401. [\x1B[0;32m OK \x1B[0m] Started \x1B[0;1;39mNetwork Manager Script Dispatcher Service\x1B[0m.
  402. Starting \x1B[0;1;39mAuthorization Manager\x1B[0m...
  403. mmc2: queuing unknown CIS tuple 0x01 (3 bytes)
  404. mmc2: queuing unknown CIS tuple 0x1a (5 bytes)
  405. mmc2: queuing unknown CIS tuple 0x1b (8 bytes)
  406. [\x1B[0;32m OK \x1B[0m] Started \x1B[0;1;39mNetwork Manager Wait Online\x1B[0m.
  407. mmc2: queuing unknown CIS tuple 0x80 (1 bytes)
  408. [\x1B[0;32m OK \x1B[0m] Reached target \x1B[0;1;39mNetwork is Online\x1B[0m.
  409. mmc2: queuing unknown CIS tuple 0x81 (1 bytes)
  410. mmc2: queuing unknown CIS tuple 0x82 (1 bytes)
  411. Starting \x1B[0;1;39mServer for Logs Manager\x1B[0m...
  412. mmc2: new high speed SDIO card at address 0001
  413. [\x1B[0;32m OK \x1B[0m] Started \x1B[0;1;39mVector\x1B[0m.
  414. [\x1B[0;32m OK \x1B[0m] Started \x1B[0;1;39mAuthorization Manager\x1B[0m.
  415. mmc2: card 0001 removed
  416. mmc2: queuing unknown CIS tuple 0x01 (3 bytes)
  417. mmc2: queuing unknown CIS tuple 0x1a (5 bytes)
  418. mmc2: queuing unknown CIS tuple 0x1b (8 bytes)
  419. mmc2: queuing unknown CIS tuple 0x80 (1 bytes)
  420. mmc2: new high speed SDIO card at address 0001
  421. ... lock
  422. apa1022020256_set_brightness 3 10
  423. brightnessByte E1
  424. data[1]=E1FFB4C8
  425. ... unlock
  426. IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  427. IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  428. IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  429. [\x1B[0m\x1B[0;31m* \x1B[0m] (1 of 3) A start job is running for\xE2\x80\xA6Cluster 11-ast_v1 (22s / no limit)
  430. ... lock
  431. apa1022020256_set_brightness 3 0
  432. brightnessByte E0
  433. data[1]=E0FFB4C8
  434. ... unlock
  435. ... lock
  436. apa1022020256_set_brightness 3 0
  437. brightnessByte E0
  438. data[1]=E0FFB4C8
  439. \x1B[K[\x1B[0;1;31m*\x1B[0m\x1B[0;31m* \x1B[0m] (1 of 3) A start job is running for\xE2\x80\xA6Cluster 11-ast_v1 (23s / no limit)
  440. \x1B[K[\x1B[0;32m OK \x1B[0m] Started \x1B[0;1;39mPostgreSQL Cluster 11-ast_v1\x1B[0m.
  441. \x1B[K Starting \x1B[0;1;39mPostgreSQL RDBMS\x1B[0m...
  442. [\x1B[0;32m OK \x1B[0m] Started \x1B[0;1;39mPostgreSQL RDBMS\x1B[0m.
  443. [\x1B[0;32m OK \x1B[0m] Reached target \x1B[0;1;39mMulti-User System\x1B[0m.
  444. [\x1B[0;32m OK \x1B[0m] Reached target \x1B[0;1;39mGraphical Interface\x1B[0m.
  445. Starting \x1B[0;1;39mUpdate UTMP about System Runlevel Changes\x1B[0m...
  446. [\x1B[0;32m OK \x1B[0m] Started \x1B[0;1;39mUpdate UTMP about System Runlevel Changes\x1B[0m.
  447. Stopping \x1B[0;1;39mVector\x1B[0m...
  448. [\x1B[0;32m OK \x1B[0m] Stopped \x1B[0;1;39mVector\x1B[0m.
  449. [\x1B[0;32m OK \x1B[0m] Started \x1B[0;1;39mServer for Logs Manager\x1B[0m.
  450. [\x1B[0;32m OK \x1B[0m] Started \x1B[0;1;39mVector\x1B[0m.
  451. ... unlock
  452. mmc2: card 0001 removed
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!