Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- enrico@enrico-desktop:~$ sudo smartctl -a /dev/sdc
- smartctl 5.43 2012-06-30 r3573 [x86_64-linux-3.5.0-18-generic] (local build)
- Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net
- === START OF INFORMATION SECTION ===
- Model Family: Fujitsu MHV
- Device Model: FUJITSU MHV2120BH PL
- Serial Number: NW9XT6C31DF4
- Firmware Version: 892C
- User Capacity: 120,034,123,776 bytes [120 GB]
- Sector Size: 512 bytes logical/physical
- Device is: In smartctl database [for details use: -P show]
- ATA Version is: 7
- ATA Standard is: ATA/ATAPI-7 T13 1532D revision 4a
- Local Time is: Sun Nov 25 21:18:07 2012 CET
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x00) Offline data collection activity
- was never started.
- Auto Offline Data Collection: Disabled.
- Self-test execution status: ( 24) The self-test routine was aborted by
- the host.
- Total time to complete Offline
- data collection: ( 702) seconds.
- Offline data collection
- capabilities: (0x5b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- No Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 2) minutes.
- Extended self-test routine
- recommended polling time: ( 82) minutes.
- SCT capabilities: (0x003d) SCT Status supported.
- SCT Error Recovery Control supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 16
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
- 1 Raw_Read_Error_Rate 0x000f 100 100 046 Pre-fail Always - 1879
- 2 Throughput_Performance 0x0005 100 100 030 Pre-fail Offline - 31850496
- 3 Spin_Up_Time 0x0003 100 100 025 Pre-fail Always - 1
- 4 Start_Stop_Count 0x0032 099 099 000 Old_age Always - 2756
- 5 Reallocated_Sector_Ct 0x0033 100 100 024 Pre-fail Always - 13 (1995 5)
- 7 Seek_Error_Rate 0x000f 100 100 047 Pre-fail Always - 3332
- 8 Seek_Time_Performance 0x0005 100 100 019 Pre-fail Offline - 0
- 9 Power_On_Seconds 0x0032 084 084 000 Old_age Always - 2h+19m+38s
- 10 Spin_Retry_Count 0x0013 100 100 020 Pre-fail Always - 0
- 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 2160
- 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 199
- 193 Load_Cycle_Count 0x0032 099 099 000 Old_age Always - 34735
- 194 Temperature_Celsius 0x0022 100 085 000 Old_age Always - 24 (Min/Max 11/63)
- 195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 92
- 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 13 (0 6885)
- 197 Current_Pending_Sector 0x0012 091 091 000 Old_age Always - 10
- 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
- 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
- 200 Multi_Zone_Error_Rate 0x000f 100 100 060 Pre-fail Always - 1860
- 203 Run_Out_Cancel 0x0002 100 100 000 Old_age Always - 433788680617
- 240 Head_Flying_Hours 0x003e 200 200 000 Old_age Always - 0
- SMART Error Log Version: 1
- ATA Error Count: 24 (device log contains only the most recent five errors)
- CR = Command Register [HEX]
- FR = Features Register [HEX]
- SC = Sector Count Register [HEX]
- SN = Sector Number Register [HEX]
- CL = Cylinder Low Register [HEX]
- CH = Cylinder High Register [HEX]
- DH = Device/Head Register [HEX]
- DC = Device Command Register [HEX]
- ER = Error register [HEX]
- ST = Status register [HEX]
- Powered_Up_Time is measured from power on, and printed as
- DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
- SS=sec, and sss=millisec. It "wraps" after 49.710 days.
- Error 24 occurred at disk power-on lifetime: 8378 hours (349 days + 2 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 14 f3 62 8b e0 Error: UNC 20 sectors at LBA = 0x008b62f3 = 9134835
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- c8 00 40 c7 62 8b e0 00 00:39:28.537 READ DMA
- ca 00 08 af 0f 60 e0 00 00:39:28.537 WRITE DMA
- c8 00 40 87 62 8b e0 00 00:39:28.536 READ DMA
- ca 00 10 c7 fd 5e e0 00 00:39:28.536 WRITE DMA
- c8 00 40 47 62 8b e0 00 00:39:28.536 READ DMA
- Error 23 occurred at disk power-on lifetime: 8377 hours (349 days + 1 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 30 d7 7d 8b e0 Error: UNC 48 sectors at LBA = 0x008b7dd7 = 9141719
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- c8 00 40 c7 7d 8b e0 00 00:38:10.532 READ DMA
- ca 00 60 cf 4d 2f e0 00 00:38:10.344 WRITE DMA
- ca 00 48 9f e3 5e e0 00 00:38:10.342 WRITE DMA
- ca 00 60 6f 4d 2f e0 00 00:38:10.342 WRITE DMA
- ca 00 18 8f 4f 2f e0 00 00:38:10.338 WRITE DMA
- Error 22 occurred at disk power-on lifetime: 8377 hours (349 days + 1 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 30 d7 7d 8b e0 Error: UNC 48 sectors at LBA = 0x008b7dd7 = 9141719
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- c8 00 40 c7 7d 8b e0 00 00:38:05.695 READ DMA
- ca 00 20 8f 31 2f e0 00 00:38:05.695 WRITE DMA
- ca 00 40 0f 31 2f e0 00 00:38:05.687 WRITE DMA
- ca 00 28 27 2f 2f e0 00 00:38:05.687 WRITE DMA
- ca 00 70 f7 20 2f e0 00 00:38:05.664 WRITE DMA
- Error 21 occurred at disk power-on lifetime: 8377 hours (349 days + 1 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 30 d7 7d 8b e0 Error: UNC 48 sectors at LBA = 0x008b7dd7 = 9141719
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- c8 00 40 c7 7d 8b e0 00 00:38:01.152 READ DMA
- c8 00 3f 0f 7e 8b e0 00 00:38:01.151 READ DMA
- c8 00 40 87 7d 8b e0 00 00:38:01.135 READ DMA
- c8 00 08 07 0c 60 e0 00 00:38:01.135 READ DMA
- c8 00 34 cf 4e 01 e0 00 00:38:01.118 READ DMA
- Error 20 occurred at disk power-on lifetime: 8377 hours (349 days + 1 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 09 36 82 13 e0 Error: UNC 9 sectors at LBA = 0x00138236 = 1278518
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- c8 00 80 bf 81 13 e0 00 00:28:05.153 READ DMA
- c8 00 80 3f 81 13 e0 00 00:28:05.153 READ DMA
- c8 00 80 bf 80 13 e0 00 00:28:05.152 READ DMA
- ca 00 80 6f df 15 e0 00 00:28:05.151 WRITE DMA
- c8 00 80 3f 80 13 e0 00 00:28:05.151 READ DMA
- SMART Self-test log structure revision number 1
- Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
- # 1 Extended offline Aborted by host 80% 5800 -
- # 2 Short offline Completed without error 00% 5800 -
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
- enrico@enrico-desktop:~$
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement