Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.5.16-200.fc31.x86_64] (local build)
- Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Model Family: Hitachi Deskstar 7K1000.C
- Device Model: Hitachi HDS721010CLA332
- Serial Number: JP2940HZ1V0ELC
- LU WWN Device Id: 5 000cca 375d9eacc
- Firmware Version: JP4OA3MA
- User Capacity: 1.000.203.804.160 bytes [1,00 TB]
- Sector Size: 512 bytes logical/physical
- Rotation Rate: 7200 rpm
- Form Factor: 3.5 inches
- Device is: In smartctl database [for details use: -P show]
- ATA Version is: ATA8-ACS T13/1699-D revision 4
- SATA Version is: SATA 2.6, 3.0 Gb/s
- Local Time is: Tue Apr 21 11:07:26 2020 EEST
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- === START OF ENABLE/DISABLE COMMANDS SECTION ===
- SMART Enabled.
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x84) Offline data collection activity
- was suspended by an interrupting command from host.
- Auto Offline Data Collection: Enabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: ( 9811) seconds.
- Offline data collection
- capabilities: (0x5b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- No Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 1) minutes.
- Extended self-test routine
- recommended polling time: ( 164) minutes.
- SCT capabilities: (0x003d) SCT Status supported.
- SCT Error Recovery Control supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 16
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
- 1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0
- 2 Throughput_Performance 0x0005 136 136 054 Pre-fail Offline - 94
- 3 Spin_Up_Time 0x0007 118 118 024 Pre-fail Always - 320 (Average 320)
- 4 Start_Stop_Count 0x0012 096 096 000 Old_age Always - 16050
- 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0
- 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
- 8 Seek_Time_Performance 0x0005 144 144 020 Pre-fail Offline - 28
- 9 Power_On_Hours 0x0012 096 096 000 Old_age Always - 34279
- 10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
- 12 Power_Cycle_Count 0x0032 098 098 000 Old_age Always - 11065
- 192 Power-Off_Retract_Count 0x0032 087 087 000 Old_age Always - 16053
- 193 Load_Cycle_Count 0x0012 087 087 000 Old_age Always - 16053
- 194 Temperature_Celsius 0x0002 162 162 000 Old_age Always - 37 (Min/Max 14/55)
- 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
- 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
- 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
- 199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 64273
- SMART Error Log Version: 1
- ATA Error Count: 20655 (device log contains only the most recent five errors)
- CR = Command Register [HEX]
- FR = Features Register [HEX]
- SC = Sector Count Register [HEX]
- SN = Sector Number Register [HEX]
- CL = Cylinder Low Register [HEX]
- CH = Cylinder High Register [HEX]
- DH = Device/Head Register [HEX]
- DC = Device Command Register [HEX]
- ER = Error register [HEX]
- ST = Status register [HEX]
- Powered_Up_Time is measured from power on, and printed as
- DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
- SS=sec, and sss=millisec. It "wraps" after 49.710 days.
- Error 20655 occurred at disk power-on lifetime: 22391 hours (932 days + 23 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 01 c7 0e 15 0c Error: UNC 1 sectors at LBA = 0x0c150ec7 = 202706631
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 25 00 05 c3 0e 15 4c 00 27d+13:56:55.253 READ DMA EXT
- 25 00 08 c3 0e 15 4c 00 27d+13:56:54.757 READ DMA EXT
- 35 00 00 e8 62 e8 43 00 27d+13:56:54.626 WRITE DMA EXT
- 35 00 00 e8 61 e8 43 00 27d+13:56:54.622 WRITE DMA EXT
- 35 00 00 e8 60 e8 43 00 27d+13:56:54.618 WRITE DMA EXT
- Error 20654 occurred at disk power-on lifetime: 22391 hours (932 days + 23 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 01 ca 0e 15 0c Error: UNC 1 sectors at LBA = 0x0c150eca = 202706634
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 25 00 08 c3 0e 15 4c 00 27d+13:56:54.757 READ DMA EXT
- 35 00 00 e8 62 e8 43 00 27d+13:56:54.626 WRITE DMA EXT
- 35 00 00 e8 61 e8 43 00 27d+13:56:54.622 WRITE DMA EXT
- 35 00 00 e8 60 e8 43 00 27d+13:56:54.618 WRITE DMA EXT
- 35 00 00 e8 5f e8 43 00 27d+13:56:54.614 WRITE DMA EXT
- Error 20653 occurred at disk power-on lifetime: 22391 hours (932 days + 23 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 84 51 60 88 5f e8 03 Error: ICRC, ABRT 96 sectors at LBA = 0x03e85f88 = 65560456
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 35 00 00 e8 5e e8 43 00 27d+13:56:54.606 WRITE DMA EXT
- 35 00 00 e8 5d e8 43 00 27d+13:56:54.602 WRITE DMA EXT
- 35 00 00 e8 5c e8 43 00 27d+13:56:54.598 WRITE DMA EXT
- 35 00 00 e8 5b e8 43 00 27d+13:56:54.594 WRITE DMA EXT
- 35 00 00 e8 57 e8 43 00 27d+13:56:54.587 WRITE DMA EXT
- Error 20652 occurred at disk power-on lifetime: 22391 hours (932 days + 23 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 84 51 a7 d0 ff e6 03 Error: ICRC, ABRT 167 sectors at LBA = 0x03e6ffd0 = 65470416
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 35 00 f7 80 ff e6 43 00 27d+13:56:54.562 WRITE DMA EXT
- 35 00 00 80 fe e6 43 00 27d+13:56:54.556 WRITE DMA EXT
- 35 00 00 80 fd e6 43 00 27d+13:56:54.549 WRITE DMA EXT
- 35 00 00 80 fc e6 43 00 27d+13:56:54.541 WRITE DMA EXT
- 25 00 05 c3 0e 15 4c 00 27d+13:56:54.134 READ DMA EXT
- Error 20651 occurred at disk power-on lifetime: 22391 hours (932 days + 23 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 84 51 b0 d0 fe e6 03 Error: ICRC, ABRT 176 sectors at LBA = 0x03e6fed0 = 65470160
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 35 00 00 80 fe e6 43 00 27d+13:56:54.556 WRITE DMA EXT
- 35 00 00 80 fd e6 43 00 27d+13:56:54.549 WRITE DMA EXT
- 35 00 00 80 fc e6 43 00 27d+13:56:54.541 WRITE DMA EXT
- 25 00 05 c3 0e 15 4c 00 27d+13:56:54.134 READ DMA EXT
- 25 00 20 c3 0e 15 4c 00 27d+13:56:53.630 READ DMA EXT
- SMART Self-test log structure revision number 1
- Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
- # 1 Short offline Completed without error 00% 17932 -
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment