Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- smartctl -a /dev/sda
- smartctl 5.41 2011-06-09 r3365 [i686-linux-3.2.0-23-generic] (local build)
- Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
- === START OF INFORMATION SECTION ===
- Device Model: WDC WD5000BPKT-75PK4T0
- Serial Number: WD-WX81E71RVP63
- LU WWN Device Id: 5 0014ee 2065bc274
- Firmware Version: 01.01A01
- User Capacity: 500,107,862,016 bytes [500 GB]
- Sector Sizes: 512 bytes logical, 4096 bytes physical
- Device is: Not in smartctl database [for details use: -P showall]
- ATA Version is: 8
- ATA Standard is: Exact ATA specification draft version not indicated
- Local Time is: Thu Dec 19 14:28:59 2013 UTC
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: FAILED!
- Drive failure expected in less than 24 hours. SAVE ALL DATA.
- See vendor-specific Attribute list for failed Attributes.
- General SMART Values:
- Offline data collection status: (0x00) Offline data collection activity
- was never started.
- Auto Offline Data Collection: Disabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: ( 8880) seconds.
- Offline data collection
- capabilities: (0x7b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 2) minutes.
- Extended self-test routine
- recommended polling time: ( 90) minutes.
- Conveyance self-test routine
- recommended polling time: ( 5) minutes.
- SCT capabilities: (0x7035) SCT Status supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 16
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
- 1 Raw_Read_Error_Rate 0x002f 197 197 051 Pre-fail Always - 28808
- 3 Spin_Up_Time 0x0027 193 182 021 Pre-fail Always - 1316
- 4 Start_Stop_Count 0x0032 098 098 000 Old_age Always - 2951
- 5 Reallocated_Sector_Ct 0x0033 133 133 140 Pre-fail Always FAILING_NOW 561
- 7 Seek_Error_Rate 0x002e 200 061 000 Old_age Always - 234
- 9 Power_On_Hours 0x0032 091 091 000 Old_age Always - 6831
- 10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0
- 11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0
- 12 Power_Cycle_Count 0x0032 098 098 000 Old_age Always - 2945
- 191 G-Sense_Error_Rate 0x0032 001 001 000 Old_age Always - 6407
- 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 85
- 193 Load_Cycle_Count 0x0032 196 196 000 Old_age Always - 13541
- 194 Temperature_Celsius 0x0022 114 100 000 Old_age Always - 33
- 196 Reallocated_Event_Count 0x0032 001 001 000 Old_age Always - 561
- 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 5
- 198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0
- 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
- 200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age Offline - 0
- 240 Head_Flying_Hours 0x0032 091 091 000 Old_age Always - 6781
- 241 Total_LBAs_Written 0x0032 200 200 000 Old_age Always - 11165204920
- 242 Total_LBAs_Read 0x0032 200 200 000 Old_age Always - 18724462556
- 254 Free_Fall_Sensor 0x0032 001 001 000 Old_age Always - 1703
- SMART Error Log Version: 1
- ATA Error Count: 1204 (device log contains only the most recent five errors)
- CR = Command Register [HEX]
- FR = Features Register [HEX]
- SC = Sector Count Register [HEX]
- SN = Sector Number Register [HEX]
- CL = Cylinder Low Register [HEX]
- CH = Cylinder High Register [HEX]
- DH = Device/Head Register [HEX]
- DC = Device Command Register [HEX]
- ER = Error register [HEX]
- ST = Status register [HEX]
- Powered_Up_Time is measured from power on, and printed as
- DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
- SS=sec, and sss=millisec. It "wraps" after 49.710 days.
- Error 1204 occurred at disk power-on lifetime: 6831 hours (284 days + 15 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 01 51 08 68 35 23 e0 Error: AMNF 8 sectors at LBA = 0x00233568 = 2307432
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- c8 00 08 68 35 23 e0 00 15:41:04.281 READ DMA
- ec 00 00 00 00 00 a0 00 15:41:03.745 IDENTIFY DEVICE
- ef 03 42 00 00 00 a0 00 15:41:03.738 SET FEATURES [Set transfer mode]
- Error 1203 occurred at disk power-on lifetime: 6831 hours (284 days + 15 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 01 51 08 68 35 23 e0 Error: AMNF 8 sectors at LBA = 0x00233568 = 2307432
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- c8 00 08 68 35 23 e0 00 15:40:58.759 READ DMA
- ec 00 00 00 00 00 a0 00 15:40:56.927 IDENTIFY DEVICE
- ef 03 42 00 00 00 a0 00 15:40:56.920 SET FEATURES [Set transfer mode]
- Error 1202 occurred at disk power-on lifetime: 6831 hours (284 days + 15 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 01 51 08 68 35 23 e0 Error: AMNF 8 sectors at LBA = 0x00233568 = 2307432
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- c8 00 08 68 35 23 e0 00 15:40:52.574 READ DMA
- ec 00 00 00 00 00 a0 00 15:40:50.557 IDENTIFY DEVICE
- ef 03 42 00 00 00 a0 00 15:40:50.551 SET FEATURES [Set transfer mode]
- Error 1201 occurred at disk power-on lifetime: 6831 hours (284 days + 15 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 01 51 08 68 35 23 e0 Error: AMNF 8 sectors at LBA = 0x00233568 = 2307432
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- c8 00 08 68 35 23 e0 00 15:40:46.605 READ DMA
- ec 00 00 00 00 00 a0 00 15:40:42.901 IDENTIFY DEVICE
- ef 03 42 00 00 00 a0 00 15:40:42.892 SET FEATURES [Set transfer mode]
- Error 1200 occurred at disk power-on lifetime: 6831 hours (284 days + 15 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 01 51 08 68 35 23 e0 Error: AMNF 8 sectors at LBA = 0x00233568 = 2307432
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- c8 00 08 68 35 23 e0 00 15:40:38.589 READ DMA
- ec 00 00 00 00 00 a0 00 15:40:38.147 IDENTIFY DEVICE
- ef 03 42 00 00 00 a0 00 15:40:38.147 SET FEATURES [Set transfer mode]
- SMART Self-test log structure revision number 1
- Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
- # 1 Short offline Completed without error 00% 6337 -
- # 2 Short offline Completed without error 00% 5880 -
- # 3 Short offline Completed without error 00% 5537 -
- # 4 Short offline Completed without error 00% 5306 -
- # 5 Short offline Completed without error 00% 4946 -
- # 6 Short offline Completed without error 00% 3984 -
- # 7 Short offline Completed without error 00% 3759 -
- # 8 Short offline Completed without error 00% 3055 -
- # 9 Short offline Completed without error 00% 2875 -
- #10 Short offline Completed without error 00% 2634 -
- #11 Short offline Completed without error 00% 2286 -
- #12 Short offline Completed without error 00% 1973 -
- #13 Short offline Completed without error 00% 1548 -
- #14 Short offline Completed without error 00% 791 -
- #15 Short offline Completed without error 00% 420 -
- #16 Short offline Completed without error 00% 0 -
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement