API tools faq
paste
remim

root@n40l:~# smartctl --all /dev/sdc (3984 Reallocated_Sect)

remim
Jan 19th, 2018
242
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 9.68 KB | None | 0 0
raw download clone embed print report
  1. root@n40l:~# smartctl --all /dev/sdc
  2. smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.9.0-4-amd64] (local build)
  3. Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
  4.  
  5. === START OF INFORMATION SECTION ===
  6. Model Family: Seagate NAS HDD
  7. Device Model: ST4000VN000-1H4168
  8. Serial Number: W300QPNC
  9. LU WWN Device Id: 5 000c50 06deb2658
  10. Firmware Version: SC43
  11. User Capacity: 4 000 787 030 016 bytes [4,00 TB]
  12. Sector Sizes: 512 bytes logical, 4096 bytes physical
  13. Rotation Rate: 5900 rpm
  14. Form Factor: 3.5 inches
  15. Device is: In smartctl database [for details use: -P show]
  16. ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b
  17. SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s)
  18. Local Time is: Fri Jan 19 10:31:15 2018 CET
  19. SMART support is: Available - device has SMART capability.
  20. SMART support is: Enabled
  21.  
  22. === START OF READ SMART DATA SECTION ===
  23. SMART overall-health self-assessment test result: PASSED
  24.  
  25. General SMART Values:
  26. Offline data collection status: (0x00) Offline data collection activity
  27. was never started.
  28. Auto Offline Data Collection: Disabled.
  29. Self-test execution status: ( 0) The previous self-test routine completed
  30. without error or no self-test has ever
  31. been run.
  32. Total time to complete Offline
  33. data collection: ( 107) seconds.
  34. Offline data collection
  35. capabilities: (0x73) SMART execute Offline immediate.
  36. Auto Offline data collection on/off support.
  37. Suspend Offline collection upon new
  38. command.
  39. No Offline surface scan supported.
  40. Self-test supported.
  41. Conveyance Self-test supported.
  42. Selective Self-test supported.
  43. SMART capabilities: (0x0003) Saves SMART data before entering
  44. power-saving mode.
  45. Supports SMART auto save timer.
  46. Error logging capability: (0x01) Error logging supported.
  47. General Purpose Logging supported.
  48. Short self-test routine
  49. recommended polling time: ( 1) minutes.
  50. Extended self-test routine
  51. recommended polling time: ( 539) minutes.
  52. Conveyance self-test routine
  53. recommended polling time: ( 2) minutes.
  54. SCT capabilities: (0x10bd) SCT Status supported.
  55. SCT Error Recovery Control supported.
  56. SCT Feature Control supported.
  57. SCT Data Table supported.
  58.  
  59. SMART Attributes Data Structure revision number: 10
  60. Vendor Specific SMART Attributes with Thresholds:
  61. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  62. 1 Raw_Read_Error_Rate 0x000f 099 082 006 Pre-fail Always - 167425131
  63. 3 Spin_Up_Time 0x0003 091 091 000 Pre-fail Always - 0
  64. 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 248
  65. 5 Reallocated_Sector_Ct 0x0033 097 097 010 Pre-fail Always - 3984
  66. 7 Seek_Error_Rate 0x000f 082 060 030 Pre-fail Always - 4493835132
  67. 9 Power_On_Hours 0x0032 063 063 000 Old_age Always - 33143
  68. 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
  69. 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 246
  70. 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
  71. 187 Reported_Uncorrect 0x0032 001 001 000 Old_age Always - 303
  72. 188 Command_Timeout 0x0032 100 099 000 Old_age Always - 4295032833
  73. 189 High_Fly_Writes 0x003a 001 001 000 Old_age Always - 717
  74. 190 Airflow_Temperature_Cel 0x0022 069 050 045 Old_age Always - 31 (Min/Max 19/39)
  75. 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0
  76. 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 45
  77. 193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 731
  78. 194 Temperature_Celsius 0x0022 031 050 000 Old_age Always - 31 (0 16 0 0 0)
  79. 197 Current_Pending_Sector 0x0012 100 089 000 Old_age Always - 40
  80. 198 Offline_Uncorrectable 0x0010 100 089 000 Old_age Offline - 40
  81. 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
  82.  
  83. SMART Error Log Version: 1
  84. ATA Error Count: 304 (device log contains only the most recent five errors)
  85. CR = Command Register [HEX]
  86. FR = Features Register [HEX]
  87. SC = Sector Count Register [HEX]
  88. SN = Sector Number Register [HEX]
  89. CL = Cylinder Low Register [HEX]
  90. CH = Cylinder High Register [HEX]
  91. DH = Device/Head Register [HEX]
  92. DC = Device Command Register [HEX]
  93. ER = Error register [HEX]
  94. ST = Status register [HEX]
  95. Powered_Up_Time is measured from power on, and printed as
  96. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  97. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  98.  
  99. Error 304 occurred at disk power-on lifetime: 32978 hours (1374 days + 2 hours)
  100. When the command that caused the error occurred, the device was active or idle.
  101.  
  102. After command completion occurred, registers were:
  103. ER ST SC SN CL CH DH
  104. -- -- -- -- -- -- --
  105. 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
  106.  
  107. Commands leading to the command that caused the error were:
  108. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  109. -- -- -- -- -- -- -- -- ---------------- --------------------
  110. 60 00 40 ff ff ff 4f 00 9d+05:10:57.940 READ FPDMA QUEUED
  111. 60 00 40 ff ff ff 4f 00 9d+05:10:57.700 READ FPDMA QUEUED
  112. 60 00 40 ff ff ff 4f 00 9d+05:10:57.700 READ FPDMA QUEUED
  113. 60 00 40 ff ff ff 4f 00 9d+05:10:57.289 READ FPDMA QUEUED
  114. 60 00 40 ff ff ff 4f 00 9d+05:10:53.256 READ FPDMA QUEUED
  115.  
  116. Error 303 occurred at disk power-on lifetime: 32978 hours (1374 days + 2 hours)
  117. When the command that caused the error occurred, the device was active or idle.
  118.  
  119. After command completion occurred, registers were:
  120. ER ST SC SN CL CH DH
  121. -- -- -- -- -- -- --
  122. 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
  123.  
  124. Commands leading to the command that caused the error were:
  125. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  126. -- -- -- -- -- -- -- -- ---------------- --------------------
  127. 60 00 40 ff ff ff 4f 00 9d+05:05:12.225 READ FPDMA QUEUED
  128. 60 00 40 ff ff ff 4f 00 9d+05:05:12.215 READ FPDMA QUEUED
  129. 60 00 40 ff ff ff 4f 00 9d+05:05:12.204 READ FPDMA QUEUED
  130. 60 00 40 ff ff ff 4f 00 9d+05:05:12.204 READ FPDMA QUEUED
  131. 60 00 40 ff ff ff 4f 00 9d+05:05:12.195 READ FPDMA QUEUED
  132.  
  133. Error 302 occurred at disk power-on lifetime: 32978 hours (1374 days + 2 hours)
  134. When the command that caused the error occurred, the device was active or idle.
  135.  
  136. After command completion occurred, registers were:
  137. ER ST SC SN CL CH DH
  138. -- -- -- -- -- -- --
  139. 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
  140.  
  141. Commands leading to the command that caused the error were:
  142. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  143. -- -- -- -- -- -- -- -- ---------------- --------------------
  144. 60 00 40 ff ff ff 4f 00 9d+05:05:02.307 READ FPDMA QUEUED
  145. 60 00 40 ff ff ff 4f 00 9d+05:05:02.307 READ FPDMA QUEUED
  146. 60 00 40 ff ff ff 4f 00 9d+05:05:02.307 READ FPDMA QUEUED
  147. 60 00 40 ff ff ff 4f 00 9d+05:05:02.306 READ FPDMA QUEUED
  148. 60 00 40 ff ff ff 4f 00 9d+05:05:02.306 READ FPDMA QUEUED
  149.  
  150. Error 301 occurred at disk power-on lifetime: 32978 hours (1374 days + 2 hours)
  151. When the command that caused the error occurred, the device was active or idle.
  152.  
  153. After command completion occurred, registers were:
  154. ER ST SC SN CL CH DH
  155. -- -- -- -- -- -- --
  156. 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
  157.  
  158. Commands leading to the command that caused the error were:
  159. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  160. -- -- -- -- -- -- -- -- ---------------- --------------------
  161. 60 00 40 ff ff ff 4f 00 9d+05:04:51.467 READ FPDMA QUEUED
  162. 60 00 40 ff ff ff 4f 00 9d+05:04:51.467 READ FPDMA QUEUED
  163. 60 00 40 ff ff ff 4f 00 9d+05:04:51.458 READ FPDMA QUEUED
  164. 60 00 40 ff ff ff 4f 00 9d+05:04:51.449 READ FPDMA QUEUED
  165. 60 00 40 ff ff ff 4f 00 9d+05:04:51.439 READ FPDMA QUEUED
  166.  
  167. Error 300 occurred at disk power-on lifetime: 32978 hours (1374 days + 2 hours)
  168. When the command that caused the error occurred, the device was active or idle.
  169.  
  170. After command completion occurred, registers were:
  171. ER ST SC SN CL CH DH
  172. -- -- -- -- -- -- --
  173. 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
  174.  
  175. Commands leading to the command that caused the error were:
  176. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  177. -- -- -- -- -- -- -- -- ---------------- --------------------
  178. 60 00 40 ff ff ff 4f 00 9d+05:04:38.301 READ FPDMA QUEUED
  179. 60 00 40 ff ff ff 4f 00 9d+05:04:38.301 READ FPDMA QUEUED
  180. 60 00 40 ff ff ff 4f 00 9d+05:04:38.301 READ FPDMA QUEUED
  181. 60 00 40 ff ff ff 4f 00 9d+05:04:38.301 READ FPDMA QUEUED
  182. 60 00 40 ff ff ff 4f 00 9d+05:04:38.301 READ FPDMA QUEUED
  183.  
  184. SMART Self-test log structure revision number 1
  185. No self-tests have been logged. [To run self-tests, use: smartctl -t]
  186.  
  187. SMART Selective self-test log data structure revision number 1
  188. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  189. 1 0 0 Not_testing
  190. 2 0 0 Not_testing
  191. 3 0 0 Not_testing
  192. 4 0 0 Not_testing
  193. 5 0 0 Not_testing
  194. Selective self-test flags (0x0):
  195. After scanning selected spans, do NOT read-scan remainder of disk.
  196. If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!