Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] Booting Linux on physical CPU 0x0
- [ 0.000000] Linux version 4.9.78-ge6b47d58 (root@bigcountry907) (gcc version 8.2.1 20180802 (GNU Toolchain for the A-profile Architecture 8.2-2019.01 (arm-rel-8.28)) ) #1 SMP PREEMPT Wed Mar 20 09:13:16 EDT 2019
- [ 0.000000] Boot CPU: AArch64 Processor [410fd034]
- [ 0.000000] earlycon: pl11 at MMIO 0x00000000fff32000 (options '115200')
- [ 0.000000] bootconsole [pl11] enabled
- [ 0.000000] efi: Getting EFI parameters from FDT:
- [ 0.000000] efi: EFI v2.60 by EDK II
- [ 0.000000] efi: MEMATTR=0xbe775698
- [ 0.000000] Ion: base 0xbc900000, size is 0x1e00000, node name graphic, heap-name carveout_gralloc namesize 17,[99][97][114][118]
- [ 0.000000] Ion: insert heap-name carveout_gralloc
- [ 0.000000] OF: reserved mem: initialized node graphic, compatible id hisi_ion
- [ 0.000000] cma: Reserved 64 MiB at 0x00000000b3000000
- [ 0.000000] On node 0 totalpages: 1566519
- [ 0.000000] DMA zone: 12189 pages used for memmap
- [ 0.000000] DMA zone: 0 pages reserved
- [ 0.000000] DMA zone: 780087 pages, LIFO batch:31
- [ 0.000000] Normal zone: 12288 pages used for memmap
- [ 0.000000] Normal zone: 786432 pages, LIFO batch:31
- [ 0.000000] psci: probing for conduit method from DT.
- [ 0.000000] psci: PSCIv1.1 detected in firmware.
- [ 0.000000] psci: Using standard PSCI v0.2 function IDs
- [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
- [ 0.000000] percpu: Embedded 22 pages/cpu @ffff8001bfeda000 s49944 r8192 d31976 u90112
- [ 0.000000] pcpu-alloc: s49944 r8192 d31976 u90112 alloc=22*4096
- [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
- [ 0.000000] Detected VIPT I-cache on CPU0
- [ 0.000000] CPU features: enabling workaround for ARM erratum 845719
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1542042
- [ 0.000000] Kernel command line: BOOT_IMAGE=(hd3,gpt12)/boot/Image earlycon=pl011,0xfff32000,115200 clk_ignore_unused=true console=tty0 console=ttyAMA6,115200n8 root=/dev/sdd12 rootwait rw quiet efi=noruntime
- [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
- [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
- [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
- [ 0.000000] software IO TLB [mem 0xaf000000-0xb3000000] (64MB) mapped at [ffff8000af000000-ffff8000b2ffffff]
- [ 0.000000] Memory: 5963280K/6266076K available (12092K kernel code, 1132K rwdata, 7848K rodata, 4096K init, 659K bss, 237260K reserved, 65536K cma-reserved)
- [ 0.000000] Virtual kernel memory layout:
- [ 0.000000] modules : 0xffff000000000000 - 0xffff000008000000 ( 128 MB)
- [ 0.000000] vmalloc : 0xffff000008000000 - 0xffff7dffbfff0000 (129022 GB)
- [ 0.000000] .text : 0xffff000008080000 - 0xffff000008c50000 ( 12096 KB)
- [ 0.000000] .rodata : 0xffff000008c50000 - 0xffff000009400000 ( 7872 KB)
- [ 0.000000] .init : 0xffff000009400000 - 0xffff000009800000 ( 4096 KB)
- [ 0.000000] .data : 0xffff000009800000 - 0xffff00000991b200 ( 1133 KB)
- [ 0.000000] .bss : 0xffff00000991b200 - 0xffff0000099bfe64 ( 660 KB)
- [ 0.000000] fixed : 0xffff7dfffe7fb000 - 0xffff7dfffec00000 ( 4116 KB)
- [ 0.000000] PCI I/O : 0xffff7dfffee00000 - 0xffff7dffffe00000 ( 16 MB)
- [ 0.000000] vmemmap : 0xffff7e0000000000 - 0xffff800000000000 ( 2048 GB maximum)
- [ 0.000000] 0xffff7e0000000000 - 0xffff7e0007000000 ( 112 MB actual)
- [ 0.000000] memory : 0xffff800000000000 - 0xffff8001c0000000 ( 7168 MB)
- [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
- [ 0.000000] Preemptible hierarchical RCU implementation.
- [ 0.000000] Build-time adjustment of leaf fanout to 64.
- [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8.
- [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
- [ 0.000000] NR_IRQS:64 nr_irqs:64 0
- [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 1.92MHz (phys).
- [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x1c570327e, max_idle_ns: 1763180809505 ns
- [ 0.000002] sched_clock: 56 bits at 1920kHz, resolution 520ns, wraps every 4398046510977ns
- [ 0.000303] Console: colour dummy device 80x25
- [ 0.000319] console [tty0] enabled
- [ 0.000336] Calibrating delay loop (skipped), value calculated using timer frequency.. 3.84 BogoMIPS (lpj=7680)
- [ 0.000342] pid_max: default: 32768 minimum: 301
- [ 0.000380] Security Framework initialized
- [ 0.000384] SELinux: Initializing.
- [ 0.000414] SELinux: Starting in permissive mode
- [ 0.000432] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
- [ 0.000435] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
- [ 0.001577] sched-energy: Sched-energy-costs installed from DT
- [ 0.001581] CPU0: update cpu_capacity 360
- [ 0.001586] ASID allocator initialised with 32768 entries
- [ 0.031937] /soc/interrupt-controller@0xf4000000: Unable to locate ITS domain
- [ 0.039264] /soc/interrupt-controller@0xf4000000: unable to locate ITS domain
- [ 0.047232] EFI runtime services will be disabled.
- [ 0.094756] Detected VIPT I-cache on CPU1
- [ 0.094791] CPU1: update cpu_capacity 360
- [ 0.094793] CPU1: Booted secondary processor [410fd034]
- [ 0.126771] Detected VIPT I-cache on CPU2
- [ 0.126788] CPU2: update cpu_capacity 360
- [ 0.126791] CPU2: Booted secondary processor [410fd034]
- [ 0.158807] Detected VIPT I-cache on CPU3
- [ 0.158822] CPU3: update cpu_capacity 360
- [ 0.158824] CPU3: Booted secondary processor [410fd034]
- [ 0.191345] Detected VIPT I-cache on CPU4
- [ 0.191351] CPU features: SANITY CHECK: Unexpected variation in SYS_ID_AA64MMFR0_EL1. Boot CPU: 0x00000000001122, CPU4: 0x00000000101122
- [ 0.191355] CPU features: Unsupported CPU feature variation detected.
- [ 0.191370] CPU4: update cpu_capacity 1024
- [ 0.191371] CPU4: Booted secondary processor [410fd092]
- [ 0.222884] Detected VIPT I-cache on CPU5
- [ 0.222888] CPU features: SANITY CHECK: Unexpected variation in SYS_ID_AA64MMFR0_EL1. Boot CPU: 0x00000000001122, CPU5: 0x00000000101122
- [ 0.222898] CPU5: update cpu_capacity 1024
- [ 0.222900] CPU5: Booted secondary processor [410fd092]
- [ 0.254923] Detected VIPT I-cache on CPU6
- [ 0.254927] CPU features: SANITY CHECK: Unexpected variation in SYS_ID_AA64MMFR0_EL1. Boot CPU: 0x00000000001122, CPU6: 0x00000000101122
- [ 0.254938] CPU6: update cpu_capacity 1024
- [ 0.254939] CPU6: Booted secondary processor [410fd092]
- [ 0.286965] Detected VIPT I-cache on CPU7
- [ 0.286969] CPU features: SANITY CHECK: Unexpected variation in SYS_ID_AA64MMFR0_EL1. Boot CPU: 0x00000000001122, CPU7: 0x00000000101122
- [ 0.286979] CPU7: update cpu_capacity 1024
- [ 0.286980] CPU7: Booted secondary processor [410fd092]
- [ 0.287028] Brought up 8 CPUs
- [ 0.287031] SMP: Total of 8 processors activated.
- [ 0.287034] CPU features: detected feature: 32-bit EL0 Support
- [ 0.287257] CPU: All CPU(s) started at EL2
- [ 0.287287] alternatives: patching kernel code
- [ 0.289367] devtmpfs: initialized
- [ 0.293255] DMI not present or invalid.
- [ 0.293366] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
- [ 0.293373] futex hash table entries: 2048 (order: 6, 262144 bytes)
- [ 0.293930] pinctrl core: initialized pinctrl subsystem
- [ 0.294560] NET: Registered protocol family 16
- [ 0.294896] schedtune: init normalization constants...
- [ 0.294904] schedtune: CLUSTER[0-3] min_pwr: 0 max_pwr: 55
- [ 0.294907] schedtune: CPU[0] min_pwr: 0 max_pwr: 283
- [ 0.294909] schedtune: CPU[1] min_pwr: 0 max_pwr: 283
- [ 0.294911] schedtune: CPU[2] min_pwr: 0 max_pwr: 283
- [ 0.294914] schedtune: CPU[3] min_pwr: 0 max_pwr: 283
- [ 0.294916] schedtune: CLUSTER[4-7] min_pwr: 0 max_pwr: 218
- [ 0.294918] schedtune: CPU[4] min_pwr: 0 max_pwr: 1105
- [ 0.294920] schedtune: CPU[5] min_pwr: 0 max_pwr: 1105
- [ 0.294922] schedtune: CPU[6] min_pwr: 0 max_pwr: 1105
- [ 0.294925] schedtune: CPU[7] min_pwr: 0 max_pwr: 1105
- [ 0.294927] schedtune: SYSTEM min_pwr: 0 max_pwr: 5825
- [ 0.294930] schedtune: using normalization constants mul: 1745268256 sh1: 1 sh2: 12
- [ 0.294932] schedtune: configured to support 5 boost groups
- [ 0.310805] cpuidle: using governor ladder
- [ 0.322810] cpuidle: using governor menu
- [ 0.323475] vdso: 2 pages (1 code @ ffff000008c57000, 1 data @ ffff000009804000)
- [ 0.323484] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
- [ 0.324008] DMA: preallocated 256 KiB pool for atomic allocations
- [ 0.324295] Serial: AMBA PL011 UART driver
- [ 0.324651] pstore: using zlib compression
- [ 0.324686] console [pstore-1] enabled
- [ 0.324688] pstore: Registered ramoops as persistent store backend
- [ 0.324691] ramoops: attached 0x100000@0x20a00000, ecc: 0/0
- [ 0.325286] pinctrl-single e896c000.pinmux: 459 pins at pa ffff000008047000 size 1836
- [ 0.325752] pinctrl-single fff11000.pinmux: 463 pins at pa ffff000008049000 size 1852
- [ 0.325875] pinctrl-single fc182000.pinmux: 10 pins at pa ffff00000804b000 size 40
- [ 0.326014] pinctrl-single ff37e000.pinmux: 12 pins at pa ffff00000804d000 size 48
- [ 0.326476] pinctrl-single e896c800.pinmux: 459 pins at pa ffff00000804f800 size 1836
- [ 0.326956] pinctrl-single fff11800.pinmux: 463 pins at pa ffff000008051800 size 1852
- [ 0.327080] pinctrl-single fc182800.pinmux: 10 pins at pa ffff000008053800 size 40
- [ 0.327219] pinctrl-single ff37e800.pinmux: 12 pins at pa ffff000008055800 size 48
- [ 0.364141] ffd74000.serial: ttyAMA3 at MMIO 0xffd74000 (irq = 6, base_baud = 0) is a PL011 rev2
- [ 0.364406] fdf01000.serial: ttyAMA4 at MMIO 0xfdf01000 (irq = 7, base_baud = 0) is a PL011 rev2
- [ 0.364585] fff32000.serial: ttyAMA6 at MMIO 0xfff32000 (irq = 8, base_baud = 0) is a PL011 rev2
- [ 0.364594] console [ttyAMA6] enabled
- [ 0.364596] bootconsole [pl11] disabled
- [ 0.364745] hisi-dma64 fdf30000.dma: dma_channels:0x10 dma_requests:0x20 dma_min_chan:0x1
- [ 0.365554] hisi-dma64 fdf30000.dma: initialized
- [ 0.365556] hisi-dma64 fdf30000.dma: hisi_dma64_probe ok!
- [ 0.369234] HISI SPMI probe
- [ 0.399132] HugeTLB registered 2 MB page size, pre-allocated 0 pages
- [ 0.400083] pl061_gpio e8a0b000.gpio: PL061 GPIO chip @0x00000000e8a0b000 registered
- [ 0.400251] pl061_gpio e8a0c000.gpio: PL061 GPIO chip @0x00000000e8a0c000 registered
- [ 0.400416] pl061_gpio e8a0d000.gpio: PL061 GPIO chip @0x00000000e8a0d000 registered
- [ 0.400586] pl061_gpio e8a0e000.gpio: PL061 GPIO chip @0x00000000e8a0e000 registered
- [ 0.400772] pl061_gpio e8a0f000.gpio: PL061 GPIO chip @0x00000000e8a0f000 registered
- [ 0.400951] pl061_gpio e8a10000.gpio: PL061 GPIO chip @0x00000000e8a10000 registered
- [ 0.401111] pl061_gpio e8a11000.gpio: PL061 GPIO chip @0x00000000e8a11000 registered
- [ 0.401294] pl061_gpio e8a12000.gpio: PL061 GPIO chip @0x00000000e8a12000 registered
- [ 0.401481] pl061_gpio e8a13000.gpio: PL061 GPIO chip @0x00000000e8a13000 registered
- [ 0.401661] pl061_gpio e8a14000.gpio: PL061 GPIO chip @0x00000000e8a14000 registered
- [ 0.401819] pl061_gpio e8a15000.gpio: PL061 GPIO chip @0x00000000e8a15000 registered
- [ 0.401973] pl061_gpio e8a16000.gpio: PL061 GPIO chip @0x00000000e8a16000 registered
- [ 0.402147] pl061_gpio e8a17000.gpio: PL061 GPIO chip @0x00000000e8a17000 registered
- [ 0.402303] pl061_gpio e8a18000.gpio: PL061 GPIO chip @0x00000000e8a18000 registered
- [ 0.402466] pl061_gpio e8a19000.gpio: PL061 GPIO chip @0x00000000e8a19000 registered
- [ 0.402643] pl061_gpio e8a1a000.gpio: PL061 GPIO chip @0x00000000e8a1a000 registered
- [ 0.402827] pl061_gpio e8a1b000.gpio: PL061 GPIO chip @0x00000000e8a1b000 registered
- [ 0.403032] pl061_gpio e8a1c000.gpio: PL061 GPIO chip @0x00000000e8a1c000 registered
- [ 0.403208] pl061_gpio fff28000.gpio: PL061 GPIO chip @0x00000000fff28000 registered
- [ 0.403388] pl061_gpio fff29000.gpio: PL061 GPIO chip @0x00000000fff29000 registered
- [ 0.403590] pl061_gpio e8a1f000.gpio: PL061 GPIO chip @0x00000000e8a1f000 registered
- [ 0.403748] pl061_gpio e8a20000.gpio: PL061 GPIO chip @0x00000000e8a20000 registered
- [ 0.403925] pl061_gpio fff0b000.gpio: PL061 GPIO chip @0x00000000fff0b000 registered
- [ 0.404112] pl061_gpio fff0c000.gpio: PL061 GPIO chip @0x00000000fff0c000 registered
- [ 0.404294] pl061_gpio fff0d000.gpio: PL061 GPIO chip @0x00000000fff0d000 registered
- [ 0.404470] pl061_gpio fff0e000.gpio: PL061 GPIO chip @0x00000000fff0e000 registered
- [ 0.404634] pl061_gpio fff0f000.gpio: PL061 GPIO chip @0x00000000fff0f000 registered
- [ 0.404797] pl061_gpio fff10000.gpio: PL061 GPIO chip @0x00000000fff10000 registered
- [ 0.404981] pl061_gpio fff1d000.gpio: PL061 GPIO chip @0x00000000fff1d000 registered
- [ 0.405148] ACPI: Interpreter disabled.
- [ 0.419922] vgaarb: loaded
- [ 0.420044] SCSI subsystem initialized
- [ 0.420129] libata version 3.00 loaded.
- [ 0.420217] ssp-pl022 ffd70000.spi: ARM PL022 driver, device ID: 0x00041022
- [ 0.420234] ssp-pl022 ffd70000.spi: mapped registers from 0x00000000ffd70000 to ffff000009b09000
- [ 0.420264] ssp-pl022 ffd70000.spi: setup for DMA on RX dma0chan0, TX dma0chan1
- [ 0.420572] usbcore: registered new interface driver usbfs
- [ 0.420594] usbcore: registered new interface driver hub
- [ 0.420634] usbcore: registered new device driver usb
- [ 0.420644] tcpc_class_init_1.1.1_G
- [ 0.420654] TCPC class init OK
- [ 0.420657] Init Richtek RegMap
- [ 0.421143] Linux video capture interface: v2.00
- [ 0.421157] pps_core: LinuxPPS API ver. 1 registered
- [ 0.421158] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
- [ 0.421177] PTP clock support registered
- [ 0.421223] dmi: Firmware registration failed.
- [ 0.425745] Registered efivars operations
- [ 0.425860] Ion: invalid heap-name in node iommu_info, please check the name
- [ 0.433030] Ion: invalid heap-name in node linear, please check the name
- [ 0.439835] Ion: node name [heap_sys_user], heap-name [sys_heap]
- [ 0.445850] Ion: heap index 0 : name sys_heap base 0x0 size 0x0 id 0 type 0
- [ 0.452814] Ion: heap sys_heap base =0, try to find dynamic area
- [ 0.458904] Ion: name = sys_heap, table name carveout_gralloc
- [ 0.464733] Ion: name = sys_heap, table name
- [ 0.469173] Ion: name = sys_heap, table name
- [ 0.473611] Ion: name = sys_heap, table name
- [ 0.478051] Ion: name = sys_heap, table name
- [ 0.482497] Ion: node name [heap_carveout_gralloc], heap-name [carveout_gralloc]
- [ 0.489891] Ion: heap index 1 : name carveout_gralloc base 0x0 size 0x0 id 2 type 2
- [ 0.497544] Ion: heap carveout_gralloc base =0, try to find dynamic area
- [ 0.504328] Ion: name = carveout_gralloc, table name carveout_gralloc
- [ 0.510851] Ion: have found heap name carveout_gralloc base = 0xbc900000, size 31457280
- [ 0.518852] in hisi_ion_enable_iommu start
- [ 0.518865] of_get_iova_info:start_addr 0x40000, size 0xbffc0000 align 0x8000
- [ 0.525999] in hisi_ion_enable_iommu end
- [ 0.526001] Ion: id 0 name sys_heap base 0 size 0
- [ 0.526064] Ion: adding heap sys_heap of type 0 with 0@0
- [ 0.526065] Ion: id 1 name carveout_gralloc base 3163553792 size 31457280
- [ 0.529718] Ion: adding heap carveout_gralloc of type 2 with bc900000@1e00000
- [ 0.529839] Advanced Linux Sound Architecture Driver Initialized.
- [ 0.530032] Bluetooth: Core ver 2.22
- [ 0.530046] NET: Registered protocol family 31
- [ 0.530047] Bluetooth: HCI device and connection manager initialized
- [ 0.530051] Bluetooth: HCI socket layer initialized
- [ 0.530055] Bluetooth: L2CAP socket layer initialized
- [ 0.530064] Bluetooth: SCO socket layer initialized
- [ 0.530314] no hisilicon,hisi-pmic-irq-num1 property set
- [ 0.535627] hisi_pmic 2-00: the platform don't support ext-interrupt.
- [ 0.542124] [hisi_pmic_probe]. pmic->irqs[0] = 304
- [ 0.542136] [hisi_pmic_probe]. pmic->irqs[1] = 305
- [ 0.542147] [hisi_pmic_probe]. pmic->irqs[2] = 306
- [ 0.542157] [hisi_pmic_probe]. pmic->irqs[3] = 307
- [ 0.542165] [hisi_pmic_probe]. pmic->irqs[4] = 308
- [ 0.542173] [hisi_pmic_probe]. pmic->irqs[5] = 309
- [ 0.542180] [hisi_pmic_probe]. pmic->irqs[6] = 310
- [ 0.542189] [hisi_pmic_probe]. pmic->irqs[7] = 311
- [ 0.542196] [hisi_pmic_probe]. pmic->irqs[8] = 312
- [ 0.542204] [hisi_pmic_probe]. pmic->irqs[9] = 313
- [ 0.542213] [hisi_pmic_probe]. pmic->irqs[10] = 314
- [ 0.542220] [hisi_pmic_probe]. pmic->irqs[11] = 315
- [ 0.542230] [hisi_pmic_probe]. pmic->irqs[12] = 316
- [ 0.542237] [hisi_pmic_probe]. pmic->irqs[13] = 317
- [ 0.542245] [hisi_pmic_probe]. pmic->irqs[14] = 318
- [ 0.542253] [hisi_pmic_probe]. pmic->irqs[15] = 319
- [ 0.542500] clocksource: Switched to clocksource arch_sys_counter
- [ 0.542560] VFS: Disk quotas dquot_6.6.0
- [ 0.542587] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
- [ 0.542656] pnp: PnP ACPI: disabled
- [ 0.549318] <[hisi_dt_parse_ip_atf]: regulator_id=0, ppll0_clock_set_rate_flag=0>
- [ 0.556966] <[hisi_dt_parse_ip_atf]: regulator_id=1, ppll0_clock_set_rate_flag=0>
- [ 0.564496] vivobus: supplied by media1_subsys
- [ 0.564521] <[hisi_ip_to_atf_is_enabled]:regulator_id=1>
- [ 0.569933] <[hisi_dt_parse_ip_atf]: regulator_id=8, ppll0_clock_set_rate_flag=0>
- [ 0.577536] <[hisi_dt_parse_ip_atf]: regulator_id=2, ppll0_clock_set_rate_flag=0>
- [ 0.585049] vcodecsubsys: supplied by media2_subsys
- [ 0.585061] <[hisi_ip_to_atf_is_enabled]:regulator_id=2>
- [ 0.590467] <[hisi_dt_parse_ip_atf]: regulator_id=3, ppll0_clock_set_rate_flag=0>
- [ 0.597977] dsssubsys: supplied by vivobus
- [ 0.597987] <[hisi_ip_to_atf_is_enabled]:regulator_id=3>
- [ 0.603405] <[hisi_dt_parse_ip_atf]: regulator_id=4, ppll0_clock_set_rate_flag=0>
- [ 0.610917] ispsubsys: supplied by vivobus
- [ 0.610928] <[hisi_ip_to_atf_is_enabled]:regulator_id=4>
- [ 0.616335] <[hisi_dt_parse_ip_atf]: regulator_id=5, ppll0_clock_set_rate_flag=0>
- [ 0.623845] vdec: supplied by vcodecsubsys
- [ 0.623856] <[hisi_ip_to_atf_is_enabled]:regulator_id=5>
- [ 0.629262] <[hisi_dt_parse_ip_atf]: regulator_id=6, ppll0_clock_set_rate_flag=0>
- [ 0.636773] venc: supplied by vcodecsubsys
- [ 0.636784] <[hisi_ip_to_atf_is_enabled]:regulator_id=6>
- [ 0.642204] <[hisi_dt_parse_ip_atf]: regulator_id=7, ppll0_clock_set_rate_flag=0>
- [ 0.649715] isp_srt: supplied by ispsubsys
- [ 0.649726] <[hisi_ip_to_atf_is_enabled]:regulator_id=7>
- [ 0.655254] NET: Registered protocol family 2
- [ 0.655478] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
- [ 0.655628] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
- [ 0.655872] TCP: Hash tables configured (established 65536 bind 65536)
- [ 0.655904] UDP hash table entries: 4096 (order: 5, 131072 bytes)
- [ 0.655933] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
- [ 0.656031] NET: Registered protocol family 1
- [ 0.656043] PCI: CLS 0 bytes, default 128
- [ 0.656443] kvm [1]: 8-bit VMID
- [ 0.656445] kvm [1]: IDMAP page: c3c000
- [ 0.656446] kvm [1]: HYP VA range: 800000000000:ffffffffffff
- [ 0.657192] kvm [1]: Hyp mode initialized successfully
- [ 0.657223] kvm [1]: virtual timer IRQ4
- [ 0.658773] audit: initializing netlink subsys (disabled)
- [ 0.658804] audit: type=2000 audit(0.647:1): initialized
- [ 0.659012] workingset: timestamp_bits=46 max_order=21 bucket_order=0
- [ 0.661344] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- [ 0.661408] Registering sdcardfs 0.1
- [ 0.661573] fuse init (API version 7.26)
- [ 0.661670] 9p: Installing v9fs 9p2000 file system support
- [ 0.661777] SELinux: Registering netfilter hooks
- [ 0.663006] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
- [ 0.663009] io scheduler noop registered
- [ 0.663045] io scheduler cfq registered (default)
- [ 0.663781] libphy: mdio_driver_register: phy-bcm-ns2-pci
- [ 0.664935] Kirin-pcie f4000000.pcie: eye_param_vboost = [0xffffffff]
- [ 0.671402] Kirin-pcie f4000000.pcie: eye_param_iboost = [0xffffffff]
- [ 0.677846] Kirin-pcie f4000000.pcie: eye_param_pre = [0xffffffff]
- [ 0.684030] Kirin-pcie f4000000.pcie: eye_param_post = [0xffffffff]
- [ 0.690298] Kirin-pcie f4000000.pcie: eye_param_main = [0xffffffff]
- [ 0.731123] OF: PCI: host bridge /soc/pcie@f4000000 ranges:
- [ 0.731130] OF: PCI: MEM 0xf6000000..0xf7ffffff -> 0x00000000
- [ 0.733536] Kirin-pcie f4000000.pcie: PCI host bridge to bus 0000:00
- [ 0.733541] pci_bus 0000:00: root bus resource [bus 00-01]
- [ 0.733544] pci_bus 0000:00: root bus resource [mem 0xf6000000-0xf7ffffff] (bus address [0x00000000-0x01ffffff])
- [ 0.733568] pci 0000:00:00.0: [19e5:3670] type 01 class 0x060400
- [ 0.733591] pci 0000:00:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
- [ 0.733690] pci 0000:00:00.0: supports D1 D2
- [ 0.733692] pci 0000:00:00.0: PME# supported from D0 D1 D2 D3hot
- [ 0.733842] pci_bus 0000:01: busn_res: can not insert [bus 01-ff] under [bus 00-01] (conflicts with (null) [bus 00-01])
- [ 0.734066] pci 0000:01:00.0: [10b5:8606] type 01 class 0x060400
- [ 0.734288] pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf601ffff]
- [ 0.735967] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
- [ 0.746601] pci 0000:01:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
- [ 0.747526] pci 0000:02:01.0: [10b5:8606] type 01 class 0x060400
- [ 0.749370] pci 0000:02:01.0: PME# supported from D0 D3hot D3cold
- [ 0.750229] pci 0000:02:04.0: [10b5:8606] type 01 class 0x060400
- [ 0.752079] pci 0000:02:04.0: PME# supported from D0 D3hot D3cold
- [ 0.752922] pci 0000:02:05.0: [10b5:8606] type 01 class 0x060400
- [ 0.754772] pci 0000:02:05.0: PME# supported from D0 D3hot D3cold
- [ 0.755658] pci 0000:02:07.0: [10b5:8606] type 01 class 0x060400
- [ 0.757501] pci 0000:02:07.0: PME# supported from D0 D3hot D3cold
- [ 0.758408] pci 0000:02:09.0: [10b5:8606] type 01 class 0x060400
- [ 0.760256] pci 0000:02:09.0: PME# supported from D0 D3hot D3cold
- [ 0.761445] pci 0000:02:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
- [ 0.761557] pci 0000:02:04.0: bridge configuration invalid ([bus 00-00]), reconfiguring
- [ 0.761669] pci 0000:02:05.0: bridge configuration invalid ([bus 00-00]), reconfiguring
- [ 0.761780] pci 0000:02:07.0: bridge configuration invalid ([bus 00-00]), reconfiguring
- [ 0.761892] pci 0000:02:09.0: bridge configuration invalid ([bus 00-00]), reconfiguring
- [ 0.762817] pci 0000:03:00.0: [c0a9:2263] type 00 class 0x010802
- [ 0.763137] pci 0000:03:00.0: reg 0x10: [mem 0xf6000000-0xf6003fff 64bit]
- [ 0.765851] pci_bus 0000:03: busn_res: [bus 03-ff] end is updated to 03
- [ 0.766501] pci_bus 0000:04: busn_res: [bus 04-ff] end is updated to 04
- [ 0.767147] pci_bus 0000:05: busn_res: [bus 05-ff] end is updated to 05
- [ 0.767996] pci 0000:06:00.0: [10ec:8168] type 00 class 0x020000
- [ 0.768222] pci 0000:06:00.0: reg 0x10: [io 0x0000-0x00ff]
- [ 0.768540] pci 0000:06:00.0: reg 0x18: [mem 0xf6000000-0xf6000fff 64bit]
- [ 0.768744] pci 0000:06:00.0: reg 0x20: [mem 0xf6000000-0xf6003fff 64bit pref]
- [ 0.770051] pci 0000:06:00.0: supports D1 D2
- [ 0.770052] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.771044] pci_bus 0000:06: busn_res: [bus 06-ff] end is updated to 06
- [ 0.771682] pci_bus 0000:07: busn_res: [bus 07-ff] end is updated to 07
- [ 0.771728] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 07
- [ 0.772600] pci 0000:00:00.0: BAR 0: assigned [mem 0xf6000000-0xf6ffffff]
- [ 0.772605] pci 0000:00:00.0: BAR 14: assigned [mem 0xf7000000-0xf72fffff]
- [ 0.772608] pci 0000:00:00.0: BAR 15: assigned [mem 0xf7300000-0xf73fffff pref]
- [ 0.772610] pci 0000:00:00.0: BAR 13: no space for [io size 0x1000]
- [ 0.772613] pci 0000:00:00.0: BAR 13: failed to assign [io size 0x1000]
- [ 0.772616] pci 0000:01:00.0: BAR 14: assigned [mem 0xf7000000-0xf71fffff]
- [ 0.772618] pci 0000:01:00.0: BAR 15: assigned [mem 0xf7300000-0xf73fffff 64bit pref]
- [ 0.772619] pci 0000:01:00.0: BAR 0: assigned [mem 0xf7200000-0xf721ffff]
- [ 0.772665] pci 0000:01:00.0: BAR 13: no space for [io size 0x1000]
- [ 0.772666] pci 0000:01:00.0: BAR 13: failed to assign [io size 0x1000]
- [ 0.772668] pci 0000:02:01.0: BAR 14: assigned [mem 0xf7000000-0xf70fffff]
- [ 0.772670] pci 0000:02:07.0: BAR 14: assigned [mem 0xf7100000-0xf71fffff]
- [ 0.772672] pci 0000:02:07.0: BAR 15: assigned [mem 0xf7300000-0xf73fffff 64bit pref]
- [ 0.772673] pci 0000:02:07.0: BAR 13: no space for [io size 0x1000]
- [ 0.772675] pci 0000:02:07.0: BAR 13: failed to assign [io size 0x1000]
- [ 0.772677] pci 0000:03:00.0: BAR 0: assigned [mem 0xf7000000-0xf7003fff 64bit]
- [ 0.772838] pci 0000:02:01.0: PCI bridge to [bus 03]
- [ 0.772906] pci 0000:02:01.0: bridge window [mem 0xf7000000-0xf70fffff]
- [ 0.773039] pci 0000:02:04.0: PCI bridge to [bus 04]
- [ 0.773238] pci 0000:02:05.0: PCI bridge to [bus 05]
- [ 0.773437] pci 0000:06:00.0: BAR 4: assigned [mem 0xf7300000-0xf7303fff 64bit pref]
- [ 0.773597] pci 0000:06:00.0: BAR 2: assigned [mem 0xf7100000-0xf7100fff 64bit]
- [ 0.773756] pci 0000:06:00.0: BAR 0: no space for [io size 0x0100]
- [ 0.773757] pci 0000:06:00.0: BAR 0: failed to assign [io size 0x0100]
- [ 0.773759] pci 0000:02:07.0: PCI bridge to [bus 06]
- [ 0.773826] pci 0000:02:07.0: bridge window [mem 0xf7100000-0xf71fffff]
- [ 0.773871] pci 0000:02:07.0: bridge window [mem 0xf7300000-0xf73fffff 64bit pref]
- [ 0.773960] pci 0000:02:09.0: PCI bridge to [bus 07]
- [ 0.774158] pci 0000:01:00.0: PCI bridge to [bus 02-07]
- [ 0.774226] pci 0000:01:00.0: bridge window [mem 0xf7000000-0xf71fffff]
- [ 0.774270] pci 0000:01:00.0: bridge window [mem 0xf7300000-0xf73fffff 64bit pref]
- [ 0.774359] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
- [ 0.774365] pci 0000:00:00.0: bridge window [mem 0xf7000000-0xf72fffff]
- [ 0.774369] pci 0000:00:00.0: bridge window [mem 0xf7300000-0xf73fffff pref]
- [ 0.774532] pcieport 0000:00:00.0: Signaling PME through PCIe PME interrupt
- [ 0.774533] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
- [ 0.774534] pci 0000:02:01.0: Signaling PME through PCIe PME interrupt
- [ 0.774536] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
- [ 0.774537] pci 0000:02:04.0: Signaling PME through PCIe PME interrupt
- [ 0.774538] pci 0000:02:05.0: Signaling PME through PCIe PME interrupt
- [ 0.774539] pci 0000:02:07.0: Signaling PME through PCIe PME interrupt
- [ 0.774540] pci 0000:06:00.0: Signaling PME through PCIe PME interrupt
- [ 0.774541] pci 0000:02:09.0: Signaling PME through PCIe PME interrupt
- [ 0.774545] pcie_pme 0000:00:00.0:pcie001: service driver pcie_pme loaded
- [ 0.774857] aer 0000:00:00.0:pcie002: service driver aer loaded
- [ 0.774998] pcieport 0000:01:00.0: enabling device (0000 -> 0002)
- [ 0.777119] pcieport 0000:02:01.0: enabling device (0000 -> 0002)
- [ 0.782963] pcieport 0000:02:07.0: enabling device (0000 -> 0002)
- [ 0.788407] hisi-asp-dma e804b000.asp_dmac: initialized
- [ 0.788895] xenfs: not registering filesystem on non-xen platform
- [ 0.789337] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
- [ 0.789983] SuperH (H)SCI(F) driver initialized
- [ 0.790125] msm_serial: driver initialized
- [ 0.790254] [drm] Initialized
- [ 0.798007] [drm] the device node is dpe
- [ 0.798022] [drm] the device remote node is dsi
- [ 0.798271] [drm] dss_pwm_clk:[80000000]->[83000000].
- [ 0.798288] Error: Driver 'adv7511' is already registered, aborting...
- [ 0.805049] [drm] host attach, client name=[mipi-hikey], id=1
- [ 0.805165] [drm] dsi cur_client is 1 <0->hdmi;1->panel>
- [ 0.805290] [drm] dss_version_tag=0x40.
- [ 0.805322] [drm] dss irq = 64.
- [ 0.805332] e8600000.dpe supply regulator_dsssubsys not found, using dummy regulator
- [ 0.805352] e8600000.dpe supply regulator_media_subsys not found, using dummy regulator
- [ 0.805388] in hisi_ion_enable_iommu start
- [ 0.805388] ion domain already init return domain
- [ 0.810185] [drm] host attach, client name=[adv7533], id=0
- [ 0.810306] [drm] connector init
- [ 0.810320] kirin-drm e8600000.dpe: bound e8601000.dsi (ops dsi_ops)
- [ 0.810322] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
- [ 0.810323] [drm] No driver support for vblank timestamp query.
- [ 0.810328] [drm] num_crtc=1, num_connector=2.
- [ 0.810338] [drm:drm_helper_disable_unused_functions] *ERROR* Called for atomic driver, this is not what you want.
- [ 1.031983] random: fast init done
- [ 1.035078] [drm] kms: can't enable cloning when we probably wanted to.
- [ 1.038707] [drm] fbdev->smem_start = 0x262144, fbdev->screen_base = 0xffff00000d001000
- [ 1.038826] kirin-drm e8600000.dpe: fb0: dss frame buffer device
- [ 1.055171] [drm] Initialized kirin 1.0.0 20170309 on minor 0
- [ 1.055285] mali e82c0000.mali: Continuing without Mali regulator control
- [ 1.055599] mali e82c0000.mali: GPU identified as 0x1 arch 6.2.2 r0p0 status 1
- [ 1.055742] mali e82c0000.mali: Using coherency mode 1 set from dtb
- [ 1.055906] mali e82c0000.mali: Using configured power model mali-simple-power-model, and fallback mali-simple-power-model
- [ 1.056167] mali e82c0000.mali: Probed as mali0
- [ 1.060131] brd: module loaded
- [ 1.062201] loop: module loaded
- [ 1.062391] (stk) :sysfs entries created
- [ 1.062440] (hci_tty): inside hci_tty_init
- [ 1.062516] (hci_tty): allocated 242, 0
- [ 1.062522] Error reading temperature for gpu thermal zone: -22
- [ 1.062555] gpio_hub_probe: step in
- [ 1.062708] gpio_hub_init:gpio hub init status:0
- [ 1.063148] ufshcd-hisi ff3c0000.ufs: ufshcd_populate_vreg: Unable to find vdd-hba-supply regulator, assuming enabled
- [ 1.063151] ufshcd-hisi ff3c0000.ufs: ufshcd_populate_vreg: Unable to find vcc-supply regulator, assuming enabled
- [ 1.063153] ufshcd-hisi ff3c0000.ufs: ufshcd_populate_vreg: Unable to find vccq-supply regulator, assuming enabled
- [ 1.063155] ufshcd-hisi ff3c0000.ufs: ufshcd_populate_vreg: Unable to find vccq2-supply regulator, assuming enabled
- [ 1.105387] scsi host0: ufshcd
- [ 1.114609] hisi_sas: driver version v1.6
- [ 1.115745] libphy: Fixed MDIO Bus: probed
- [ 1.115973] tun: Universal TUN/TAP device driver, 1.6
- [ 1.115974] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- [ 1.116080] CAN device driver interface
- [ 1.126229] mcp251x spi32766.0: CANCTRL 0x87
- [ 1.126454] mcp251x spi32766.0 can0: MCP2515 successfully initialized.
- [ 1.126877] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
- [ 1.126878] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
- [ 1.126914] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
- [ 1.126915] igb: Copyright (c) 2007-2014 Intel Corporation.
- [ 1.126933] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k
- [ 1.126934] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
- [ 1.126952] sky2: driver version 1.30
- [ 1.127057] r8168 Gigabit Ethernet driver 8.045.08 loaded
- [ 1.127117] r8168 0000:06:00.0: enabling device (0000 -> 0002)
- [ 1.149166] r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625.
- [ 1.149177] r8168 Copyright (C) 2017 Realtek NIC software team <nicfae@realtek.com>
- This program comes with ABSOLUTELY NO WARRANTY; for details, please see <http://www.gnu.org/licenses/>.
- This is free software, and you are welcome to redistribute it under certain conditions; see <http://www.gnu.org/licenses/>.
- [ 1.149350] PPP generic driver version 2.4.2
- [ 1.149422] PPP BSD Compression module registered
- [ 1.149423] PPP Deflate Compression module registered
- [ 1.149439] PPP MPPE Compression module registered
- [ 1.149440] NET: Registered protocol family 24
- [ 1.149514] usbcore: registered new interface driver asix
- [ 1.149563] usbcore: registered new interface driver ax88179_178a
- [ 1.149577] usbcore: registered new interface driver cdc_ether
- [ 1.149591] usbcore: registered new interface driver net1080
- [ 1.149604] usbcore: registered new interface driver cdc_subset
- [ 1.149619] usbcore: registered new interface driver zaurus
- [ 1.149638] usbcore: registered new interface driver cdc_ncm
- [ 1.149697] VFIO - User Level meta-driver version: 0.3
- [ 1.151448] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 1.151450] ehci-pci: EHCI PCI platform driver
- [ 1.151470] ehci-platform: EHCI generic platform driver
- [ 1.151523] ehci-exynos: EHCI EXYNOS driver
- [ 1.151563] ehci-msm: Qualcomm On-Chip EHCI Host Controller
- [ 1.151597] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 1.151607] ohci-pci: OHCI PCI platform driver
- [ 1.151626] ohci-platform: OHCI generic platform driver
- [ 1.151665] ohci-exynos: OHCI EXYNOS driver
- [ 1.151856] usbcore: registered new interface driver usb-storage
- [ 1.152193] [I/hisi_pd] pd_dpm_init
- [ 1.152229] [I/hisi_pd] pd_dpm_probe : +++++++++
- [ 1.152296] gpio_hub_power_on:regulator_enable
- [ 1.157006] gpio_hub_change_typec_power: set typec vbus gpio to 0
- [ 1.157013] gpio_hub_switch_to_hub: switch to hub
- [ 1.157015] [I/hisi_pd] pd_dpm_probe ++++
- [ 1.157089] rt1711h_init (1.1.8_G): initializing...
- [ 1.157102] rt1711h node found...
- [ 1.157173] rt1711_i2c_probe
- [ 1.157173] I2C functionality : OK...
- [ 1.158753] rt_parse_dt
- [ 1.158762] rt1711h_chipID = 0x2171
- [ 1.158765] regmap_device_register: name = rt1711-4e
- [ 1.158780] rt_regmap_rt1711-4e: rt register cache data init
- [ 1.158783] rt_regmap_rt1711-4e: cache cata init successfully
- [ 1.158821] tcpc_device_register register tcpc device (type_c_port0)
- [ 1.158857] [I/hisi_pd] tcpc_device_register register_pd_wake_unlock_notifier OK
- [ 1.158858] PD Timer number = 37
- [ 1.158883] tcpci_timer_init : init OK
- [ 1.158907] pd_parse_pdata
- [ 1.158913] pd_parse_pdata src pdo data =
- [ 1.158915] pd_parse_pdata 0: 0x00019064
- [ 1.158916] pd_parse_pdata snk pdo data =
- [ 1.158917] pd_parse_pdata 0: 0x000190c8
- [ 1.158918] pd_parse_pdata 1: 0x0002d0c8
- [ 1.158919] pd_parse_pdata id vdos data =
- [ 1.158920] pd_parse_pdata 0: 0xd00029cf
- [ 1.158921] pd_parse_pdata 1: 0x00000000
- [ 1.158922] pd_parse_pdata 2: 0x00010000
- [ 1.158925] dpm_caps: local_dr_power
- [ 1.158926] dpm_caps: local_dr_data
- [ 1.158928] dpm_caps: local_ext_power
- [ 1.158928] dpm_caps: local_usb_comm
- [ 1.158929] dpm_caps: local_usb_suspend
- [ 1.158930] dpm_caps: local_high_cap
- [ 1.158931] dpm_caps: local_give_back
- [ 1.158932] dpm_caps: local_no_suspend
- [ 1.158933] dpm_caps: local_vconn_supply
- [ 1.158935] dpm_caps: attemp_discover_cable_dfp
- [ 1.158935] dpm_caps: attemp_enter_dp_mode
- [ 1.158937] dpm_caps: attemp_discover_cable
- [ 1.158938] dpm_caps: attemp_discover_id
- [ 1.158938] dpm_caps: pr_reject_as_source
- [ 1.158939] dpm_caps: pr_reject_as_sink
- [ 1.158940] dpm_caps: pr_check_gp_source
- [ 1.158941] dpm_caps: pr_check_gp_sink
- [ 1.158941] dpm_caps: dr_reject_as_dfp
- [ 1.158942] dpm_caps: dr_reject_as_ufp
- [ 1.158942] dpm_caps: snk_prefer_low_voltage
- [ 1.158943] dpm_caps: snk_ignore_mismatch_current
- [ 1.158944] dpm_caps = 0xc010c10b
- [ 1.158945] [I/hisi_pd] PE:pd_core_init
- [ 1.159202] rt1711_init_alert name = type_c_port0
- [ 1.159203] rt1711_init_alert gpio # = 293
- [ 1.159217] GPIO requested...
- [ 1.159219] rt1711_init_alert : IRQ number = 293
- [ 1.159220] rt1711_init_alert : irq initialized...
- [ 1.159244] IRQF_NO_THREAD Test
- [ 1.160103] [I/hisi_pd] [TCPC-I]SkipAlert:0x0000
- [ 1.161554] [I/hisi_pd] TPC-I:typec_init: DRP
- [ 1.170505] Error reading temperature for gpu thermal zone: -22
- [ 1.212384] [E/hisi_pd] typec_wait_ps_change: typec_wait_ps_change!!!+++++++++++
- [ 1.219786] [E/hisi_pd] typec_wait_ps_change: typec_wait_ps_change!!!-----------
- [ 1.227186] [E/hisi_pd] typec_unattached_power_entry:!!!+++++++++++
- [ 1.233690] [E/hisi_pd] tcpci_disable_vbus_control: !!!++++++++
- [ 1.239611] [E/hisi_pd] pd_dpm_handle_pe_event:!!!,event=0,+++
- [ 1.245443] [E/hisi_pd] typec_unattached_power_entry:!!!-----------
- [ 1.251709] [I/hisi_pd] TPC-I:** Unattached.SNK
- [ 1.252021] tcpc_device_irq_enable : tcpc irq enable OK!
- [ 1.252022] rt1711_i2c_probe probe OK!
- [ 1.252178] mousedev: PS/2 mouse device common for all mice
- [ 1.252230] usbcore: registered new interface driver xpad
- [ 1.252246] usbcore: registered new interface driver usb_acecad
- [ 1.252260] usbcore: registered new interface driver aiptek
- [ 1.252273] usbcore: registered new interface driver gtco
- [ 1.252284] usbcore: registered new interface driver hanwang
- [ 1.252297] usbcore: registered new interface driver kbtab
- [ 1.252772] i2c /dev entries driver
- [ 1.253233] [ISP] isp_init: enter!
- [ 1.253396] [ISP] isp_probe: enter!
- [ 1.253425] [ISP] isp_getdts: clock rate 24000000, pool size 0x1000000
- [ 1.259816] [ISP] isp_probe: exit!
- [ 1.259897] [ISP] isp_init: exit!
- [ 1.259944] usbcore: registered new interface driver uvcvideo
- [ 1.259945] USB Video Class driver (1.1.1)
- [ 1.260959] device-mapper: uevent: version 1.0.3
- [ 1.261084] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
- [ 1.261146] Bluetooth: HCI UART driver ver 2.3
- [ 1.261150] Bluetooth: HCI UART protocol H4 registered
- [ 1.261151] Bluetooth: HCI UART protocol LL registered
- [ 1.262778] sdhci: Secure Digital Host Controller Interface driver
- [ 1.262779] sdhci: Copyright(c) Pierre Ossman
- [ 1.262900] Synopsys Designware Multimedia Card Interface Driver
- [ 1.263125] dwmmc_k3 ff37f000.dwmmc1: fifo-depth property not found, using value of FIFOTH register as default
- [ 1.265325] dwmmc_k3 ff37f000.dwmmc1: IDMAC supports 64-bit address mode.
- [ 1.265388] dwmmc_k3 ff37f000.dwmmc1: Using internal DMA controller.
- [ 1.265393] dwmmc_k3 ff37f000.dwmmc1: Version ID is 270a
- [ 1.265409] dwmmc_k3 ff37f000.dwmmc1: DW MMC controller at irq 42,32 bit host data width,256 deep fifo
- [ 1.265516] dwmmc_k3 ff37f000.dwmmc1: Got CD GPIO
- [ 1.277745] ufs final power mode: gear = 3, lane = 2, pwr = 1, rate = 2
- [ 1.281283] ufshcd-hisi ff3c0000.ufs: ufshcd_find_max_sup_active_icc_level: Regulator capability was not set, actvIccLevel=0
- [ 1.284541] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
- [ 1.292965] scsi 0:0:0:49488: Well-known LUN SAMSUNG KLUCG4J1ED-B0C1 0300 PQ: 0 ANSI: 6
- [ 1.303608] dwmmc_k3 ff37f000.dwmmc1: 1 slots initialized
- [ 1.303709] dwmmc_k3 fc183000.dwmmc2: fifo-depth property not found, using value of FIFOTH register as default
- [ 1.305805] dwmmc_k3 fc183000.dwmmc2: IDMAC supports 64-bit address mode.
- [ 1.305833] dwmmc_k3 fc183000.dwmmc2: Using internal DMA controller.
- [ 1.305837] dwmmc_k3 fc183000.dwmmc2: Version ID is 270a
- [ 1.305847] dwmmc_k3 fc183000.dwmmc2: DW MMC controller at irq 43,32 bit host data width,256 deep fifo
- [ 1.331776] scsi 0:0:0:49456: Well-known LUN SAMSUNG KLUCG4J1ED-B0C1 0300 PQ: 0 ANSI: 6
- [ 1.363443] scsi 0:0:0:49476: Well-known LUN SAMSUNG KLUCG4J1ED-B0C1 0300 PQ: 0 ANSI: 6
- [ 1.395685] scsi 0:0:0:0: Direct-Access SAMSUNG KLUCG4J1ED-B0C1 0300 PQ: 0 ANSI: 6
- [ 1.404800] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
- [ 1.422834] dwmmc_k3 fc183000.dwmmc2: 1 slots initialized
- [ 1.423286] sdhci-pltfm: SDHCI platform and OF driver helper
- [ 1.424642] ledtrig-cpu: registered to indicate activity on CPUs
- [ 1.426302] hidraw: raw HID events driver (C) Jiri Kosina
- [ 1.429118] sd 0:0:0:0: [sda] 1024 4096-byte logical blocks: (4.19 MB/4.00 MiB)
- [ 1.429345] scsi 0:0:0:1: Direct-Access SAMSUNG KLUCG4J1ED-B0C1 0300 PQ: 0 ANSI: 6
- [ 1.429526] dwmmc_k3 fc183000.dwmmc2: card claims to support voltages below defined range
- [ 1.429567] sd 0:0:0:0: [sda] Write Protect is off
- [ 1.429571] sd 0:0:0:0: [sda] Mode Sense: 00 32 00 10
- [ 1.429682] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
- [ 1.431717] usbcore: registered new interface driver usbhid
- [ 1.431719] usbhid: USB HID core driver
- [ 1.432029] ashmem: initialized
- [ 1.432560] sd 0:0:0:0: [sda] Attached SCSI disk
- [ 1.433127] hisi_ddr_devfreq ddr_devfreq: init success
- [ 1.433927] hifi_misc [E][300032]:hifi_check_img_loaded:1472: hifi img is loaded fail: 0xffffffff.
- [ 1.434178] hifi pdev name[hifidsp].
- [ 1.437900] DRV_IPCIntInit begin.
- [ 1.441232] DRV_IPCIntInit line = 220
- [ 1.444926] BSP_DRV_IPCIntInit end.
- [ 1.448522] func = mailbox_init, line = 695 baseaddr = 0x8e712c00
- [ 1.448553] mem_remap_type: phys_addr:0x8e712c00 size:0x00010000 npages:17 vaddr:ffff00000bdcdc00 offset:0x00000c00
- [ 1.448555] i = 0, head_addr = 0xffff00000bdcdcf0, data_addr = 0xffff00000bdd10b0
- [ 1.448558] i = 1, head_addr = 0xffff00000bdcdc50, data_addr = 0xffff00000bdce0b0
- [ 1.448560] i = 2, head_addr = 0xffff00000bdcdd18, data_addr = 0xffff00000bdd10b0
- [ 1.448562] i = 3, head_addr = 0xffff00000bdcdc78, data_addr = 0xffff00000bdcf8b0
- [ 1.448564] <<<<<<<<<<<<<<mailbox_create_box cpu_id = 0>>>>>>>>>>>>>>
- [ 1.448568] ******************func = mailbox_init_all_handle line = 530 src_id = 1 dst_id = 4******************
- [ 1.448571] ******************func = mailbox_init_all_handle line = 530 src_id = 0 dst_id = 4******************
- [ 1.448575] ******************func = mailbox_init_all_handle line = 530 src_id = 4 dst_id = 1******************
- [ 1.448577] ******************func = mailbox_init_all_handle line = 530 src_id = 4 dst_id = 0******************
- [ 1.448747] mb init OK!
- [ 1.448877] mb->local_id = 0 dst_id = 0
- [ 1.448885] hifi_misc [I][300522]:ap_ipc_int_init:914: Enter ap_ipc_int_init
- [ 1.448889] hifi_misc [I][300522]:ap_ipc_int_init:919: Exit ap_ipc_int_init
- [ 1.448981] [cambricon_ipu_init]: platform device and driver register!
- [ 1.449094] [cambricon_ipu_probe]: Initializing IPU device!
- [ 1.449107] [cambricon_ipu_probe]:IPU FIFO_TaskElements init success, queue size: 4096
- [ 1.449171] [cambricon_ipu_probe]: platform_get_irq_byname:65
- [ 1.449195] ff400000.cambricon-ipu supply vipu not found, using dummy regulator
- [ 1.449247] [cambricon_ipu_probe]:Get regulator ip succuss! dev-num-resouce:3
- [ 1.449311] [ipu_get_feature_tree]: the platform is kirin970_cs
- [ 1.449384] [cambricon_ipu_probe]: IPU Require IRQ Succeeded
- [ 1.449634] [ipu_clock_init]: IPU_DEBUG vcodecbus_clk_ptr is fffffffffffffffe
- [ 1.449643] [ipu_clock_init]: get clk rate done, start clk rate:900000000, stop clk rate:332000000
- [ 1.449675] of_get_iova_info:start_addr 0x40000, size 0x80000000 align 0x40000
- [ 1.454506] mmc_host mmc1: Bus speed (slot 0) = 25000000Hz (slot req 25000000Hz, actual 25000000HZ div = 0)
- [ 1.455811] mmc1: new SDIO card at address 0001
- [ 1.456530] wl18xx_driver wl18xx.0.auto: Direct firmware load for ti-connectivity/wl18xx-conf.bin failed with error -2
- [ 1.456534] wlcore: ERROR could not get configuration binary ti-connectivity/wl18xx-conf.bin: -2
- [ 1.456535] wlcore: WARNING falling back to default config
- [ 1.465760] [ipu_enable_iommu] success,ipu_smmu_domain=0xffff8001b84f9ab0, dev->bus is 0xffff0000098b4af8
- [ 1.465826] [cambricon_ipu_probe]: Succeeded to initialize ipu device.
- [ 1.465872] IFO:<493:VENC_DRV_ModInit>enter VENC_DRV_ModInit()
- [ 1.473485] IFO:<429:VENC_DRV_Probe>omxvenc prepare to probe
- [ 1.480739] IFO:<368:VENC_DRV_SetupCdev>enter VENC_DRV_SetupCdev()
- [ 1.488566] IFO:<399:VENC_DRV_SetupCdev>exit VENC_DRV_SetupCdev()
- [ 1.496232] in hisi_ion_enable_iommu start
- [ 1.496233] ion domain already init return domain
- [ 1.499191] sd 0:0:0:1: [sdb] 1024 4096-byte logical blocks: (4.19 MB/4.00 MiB)
- [ 1.499364] scsi 0:0:0:2: Direct-Access SAMSUNG KLUCG4J1ED-B0C1 0300 PQ: 0 ANSI: 6
- [ 1.499652] sd 0:0:0:1: [sdb] Write Protect is off
- [ 1.499655] sd 0:0:0:1: [sdb] Mode Sense: 00 32 00 10
- [ 1.499737] sd 0:0:0:1: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA
- [ 1.500993] IFO:<131:Venc_GetDtsConfigInfo>venc_clk_rate: highRate:554000000, normalRate:450000000, lowRate:238000000
- [ 1.501107] sd 0:0:0:1: [sdb] Attached SCSI disk
- [ 1.513175] ERR:<137:Venc_GetDtsConfigInfo>get venc qos mode failed set default
- [ 1.522055] IFO:<143:Venc_GetDtsConfigInfo>SmmuPageBaseAddr is 0xffff000008dbff08
- [ 1.531109] IFO:<458:VENC_DRV_Probe>omxvenc probe successfully
- [ 1.538530] IFO:<429:VENC_DRV_Probe>omxvenc prepare to probe
- [ 1.545757] IFO:<432:VENC_DRV_Probe>venc device detected already
- [ 1.553345] IFO:<506:VENC_DRV_ModInit>success
- [ 1.559270] IFO:<510:VENC_DRV_ModInit>exit VENC_DRV_ModInit()
- [ 1.567008] in hisi_ion_enable_iommu start
- [ 1.567009] ion domain already init return domain
- [ 1.571778] Already probe omxvdec
- [ 1.572587] hisi_i2s e804f800.hisi_i2s: Registered as hisi_i2s
- [ 1.572692] u32 classifier
- [ 1.572693] Actions configured
- [ 1.572696] Netfilter messages via NETLINK v0.30.
- [ 1.572905] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
- [ 1.573005] ctnetlink v0.93: registering with nfnetlink.
- [ 1.573405] xt_time: kernel timezone is -0000
- [ 1.573890] ip_tables: (C) 2000-2006 Netfilter Core Team
- [ 1.573964] arp_tables: arp_tables: (C) 2002 David S. Miller
- [ 1.573991] Initializing XFRM netlink socket
- [ 1.574147] NET: Registered protocol family 10
- [ 1.574743] mip6: Mobile IPv6
- [ 1.574750] ip6_tables: (C) 2000-2006 Netfilter Core Team
- [ 1.574823] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
- [ 1.575019] NET: Registered protocol family 17
- [ 1.575025] NET: Registered protocol family 15
- [ 1.575026] can: controller area network core (rev 20120528 abi 9)
- [ 1.575042] NET: Registered protocol family 29
- [ 1.575048] can: raw protocol (rev 20120528)
- [ 1.575050] can: broadcast manager protocol (rev 20161123 t)
- [ 1.575053] can: netlink gateway (rev 20130117) max_hops=1
- [ 1.575554] Bluetooth: RFCOMM TTY layer initialized
- [ 1.575558] Bluetooth: RFCOMM socket layer initialized
- [ 1.575576] Bluetooth: RFCOMM ver 1.11
- [ 1.575580] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
- [ 1.575583] Bluetooth: HIDP socket layer initialized
- [ 1.575633] sd 0:0:0:2: [sdc] 2048 4096-byte logical blocks: (8.39 MB/8.00 MiB)
- [ 1.575679] 9pnet: Installing 9P2000 support
- [ 1.575806] Registered cp15_barrier emulation handler
- [ 1.575830] Registered setend emulation handler
- [ 1.576012] registered taskstats version 1
- [ 1.576138] scsi 0:0:0:3: Direct-Access SAMSUNG KLUCG4J1ED-B0C1 0300 PQ: 0 ANSI: 6
- [ 1.576169] sd 0:0:0:2: [sdc] Write Protect is off
- [ 1.576184] sd 0:0:0:2: [sdc] Mode Sense: 00 32 00 10
- [ 1.576338] sd 0:0:0:2: [sdc] Write cache: enabled, read cache: enabled, supports DPO and FUA
- [ 1.578258] sd 0:0:0:2: [sdc] Attached SCSI disk
- [ 1.587427] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
- [ 1.587436] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 1
- [ 1.587617] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220ffe5 hci version 0x110 quirks 0x00010010
- [ 1.587640] xhci-hcd xhci-hcd.1.auto: irq 354, io mem 0xff100000
- [ 1.587718] input: gpio-keys as /devices/platform/gpio-keys/input/input0
- [ 1.587720] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- [ 1.587722] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.587723] usb usb1: Product: xHCI Host Controller
- [ 1.587725] usb usb1: Manufacturer: Linux 4.9.78-ge6b47d58 xhci-hcd
- [ 1.587726] usb usb1: SerialNumber: xhci-hcd.1.auto
- [ 1.587881] hub 1-0:1.0: USB hub found
- [ 1.587891] hub 1-0:1.0: 1 port detected
- [ 1.587959] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
- [ 1.587964] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 2
- [ 1.587967] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.1 Enhanced SuperSpeed
- [ 1.587988] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
- [ 1.588013] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
- [ 1.588015] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.588017] usb usb2: Product: xHCI Host Controller
- [ 1.588018] hctosys: unable to open rtc device (rtc0)
- [ 1.588019] usb usb2: Manufacturer: Linux 4.9.78-ge6b47d58 xhci-hcd
- [ 1.588020] usb usb2: SerialNumber: xhci-hcd.1.auto
- [ 1.588021] [ISP] ov5640_main_module_init: enter!
- [ 1.588079] [ISP] ov5640_main_probe: enter!
- [ 1.588138] hub 2-0:1.0: USB hub found
- [ 1.588146] hub 2-0:1.0: 1 port detected
- [ 1.623533] sd 0:0:0:3: [sdd] 15616000 4096-byte logical blocks: (64.0 GB/59.6 GiB)
- [ 1.625382] sd 0:0:0:3: [sdd] Write Protect is off
- [ 1.625385] sd 0:0:0:3: [sdd] Mode Sense: 00 32 00 10
- [ 1.625984] sd 0:0:0:3: [sdd] Write cache: enabled, read cache: enabled, supports DPO and FUA
- [ 1.628749] sdd: sdd1 sdd2 sdd3 sdd4 sdd5 sdd6 sdd7 sdd8 sdd9 sdd10 sdd11 sdd12
- [ 1.631163] sd 0:0:0:3: [sdd] Attached SCSI disk
- [ 1.695230] wlcore: wl18xx HW: 183x or 180x, PG 2.2 (ROM 0x11)
- [ 1.700434] wlcore: loaded
- [ 1.829716] [ISP] isp_i2c_read_clear_intrbits: ABRT_SOURCE 0x1000001
- [ 1.836120] [ISP] isp_i2c_xfer: I2C abort
- [ 1.840148] [ISP] isp_i2c_write_reg: write reg fail
- [ 1.845044] [ISP] ov5640_main_power: could not set init registers
- [ 1.851163] [ISP] isp_i2c_read_reg: read[0x300a]
- [ 1.858804] [ISP] isp_i2c_read_clear_intrbits: ABRT_SOURCE 0x1000001
- [ 1.865169] [ISP] isp_i2c_xfer: I2C abort
- [ 1.869186] [ISP] isp_i2c_read_reg: read reg fail
- [ 1.873724] [ISP] ov5640_main_get_chip_id: get chip id high[255] fail
- [ 1.880198] [ISP] ov5640_main_probe: chip id is 0x0
- [ 1.885080] [ISP] ov5640_main_probe: chip id is 0x0, probe failed
- [ 1.891203] hisi-ov5640_main: probe of e8400000.isp:hisi,ov5640_main failed with error -1
- [ 1.891322] [ISP] ov5640_main_module_init: exit!
- [ 1.891327] [ISP] ov5640_sub_module_init: enter!
- [ 1.891471] [ISP] ov5640_sub_probe: enter!
- [ 1.914775] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd
- [ 1.939940] usb 2-1: New USB device found, idVendor=0451, idProduct=8140
- [ 1.939942] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 1.956480] hub 2-1:1.0: USB hub found
- [ 1.956710] hub 2-1:1.0: 4 ports detected
- [ 2.058698] usb 1-1: new high-speed USB device number 2 using xhci-hcd
- [ 2.086528] [drm] client change to HDMI
- [ 2.141728] [ISP] isp_i2c_read_clear_intrbits: ABRT_SOURCE 0x1000001
- [ 2.148133] [ISP] isp_i2c_xfer: I2C abort
- [ 2.152155] [ISP] isp_i2c_write_reg: write reg fail
- [ 2.157061] [ISP] ov5640_sub_power: could not set init registers
- [ 2.163082] [ISP] isp_i2c_read_reg: read[0x300a]
- [ 2.170722] [ISP] isp_i2c_read_clear_intrbits: ABRT_SOURCE 0x1000001
- [ 2.177084] [ISP] isp_i2c_xfer: I2C abort
- [ 2.181096] [ISP] isp_i2c_read_reg: read reg fail
- [ 2.185628] [ISP] ov5640_sub_get_chip_id: get chip id high[255] fail
- [ 2.192011] [ISP] ov5640_sub_probe: chip id is 0x0, probe failed
- [ 2.198029] hisi-ov5640_sub: probe of e8400000.isp:hisi,ov5640_sub failed with error -1
- [ 2.198097] [ISP] ov5640_sub_module_init: exit!
- [ 2.198220] clk: Not disabling unused clocks
- [ 2.198237] wlan-en-regulator: disabling
- [ 2.198260] <[hisi_ip_to_atf_is_enabled]:regulator_id=0>
- [ 2.203583] <[hisi_ip_to_atf_is_enabled]:regulator_id=1>
- [ 2.208526] usb 1-1: New USB device found, idVendor=0451, idProduct=8142
- [ 2.208528] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=1
- [ 2.208531] usb 1-1: SerialNumber: D107105914FF
- [ 2.208897] <[hisi_ip_to_atf_is_enabled]:regulator_id=8>
- [ 2.214220] <[hisi_ip_to_atf_is_enabled]:regulator_id=2>
- [ 2.219532] <[hisi_ip_to_atf_is_enabled]:regulator_id=3>
- [ 2.224844] <[hisi_ip_to_atf_is_enabled]:regulator_id=4>
- [ 2.228081] hub 1-1:1.0: USB hub found
- [ 2.228130] hub 1-1:1.0: 4 ports detected
- [ 2.230155] <[hisi_ip_to_atf_is_enabled]:regulator_id=5>
- [ 2.235468] <[hisi_ip_to_atf_is_enabled]:regulator_id=6>
- [ 2.240782] <[hisi_ip_to_atf_is_enabled]:regulator_id=7>
- [ 2.246094] ALSA device list:
- [ 2.246095] No soundcards found.
- [ 2.246159] uart-pl011 fff32000.serial: no DMA platform data
- [ 2.260942] EXT4-fs (sdd12): couldn't mount as ext3 due to feature incompatibilities
- [ 2.275965] EXT4-fs (sdd12): recovery complete
- [ 2.276319] EXT4-fs (sdd12): mounted filesystem with ordered data mode. Opts: (null)
- [ 2.276337] VFS: Mounted root (ext4 filesystem) on device 8:60.
- [ 2.277273] devtmpfs: mounted
- [ 2.278280] Freeing unused kernel memory: 4096K
- [ 2.303410] [drm] +.
- [ 2.303413] [drm] -.
- [ 2.303482] [drm] dss_pri_clk:[300000000]->[300000000].
- [ 2.303519] [drm] dss_mmbuf_clk:[238000000]->[237142858].
- [ 2.303548] [drm] mode->clock(org) = 148500
- [ 2.303550] [drm] HDMI real need clock = 144000000
- [ 2.303552] [drm] postdiv1=0x1, POSTDIV2=0x1
- [ 2.303589] [drm] dss_pxl0_clk [144000000]->[144000000]
- [ 2.303649] [drm] isr_s1 = 0x10000!
- [ 2.303655] [drm] isr_s2 = 0x11!
- [ 2.327347] systemd[1]: System time before build time, advancing clock.
- [ 2.357057] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
- [ 2.357257] systemd[1]: Detected architecture arm64.
- [ 2.357466] systemd[1]: Set hostname to <hikey970>.
- [ 2.372559] [drm] Expected : lane_clock = 864 M
- [ 2.372729] [drm] burst_mode = 0x0 (DSI_NON_BURST_SYNC_PULSES => 0)
- [ 2.372732] [drm] hsa_time=33, hbp_time=111, hline_time=1650
- [ 2.372733] [drm] lane_byte_clk=108000000, pixel_clk=144000000
- [ 2.415662] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
- [ 2.415755] systemd[1]: Listening on Syslog Socket.
- [ 2.415810] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
- [ 2.415860] systemd[1]: Listening on Journal Socket.
- [ 2.415919] systemd[1]: Started Trigger resolvconf update for networkd DNS.
- [ 2.416097] systemd[1]: Created slice User and Session Slice.
- [ 2.416115] systemd[1]: Reached target Remote File Systems (Pre).
- [ 2.497004] systemd-journald[1931]: Received request to flush runtime journal from PID 1
- [ 2.554557] usb 1-1.1: new full-speed USB device number 3 using xhci-hcd
- [ 2.656796] usb 1-1.1: New USB device found, idVendor=3938, idProduct=1059
- [ 2.656807] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 2.656808] usb 1-1.1: Product: 2.4G Wireless Keyboard
- [ 2.656810] usb 1-1.1: Manufacturer: MOSART Semi.
- [ 2.683359] input: MOSART Semi. 2.4G Wireless Keyboard as /devices/platform/soc/soc:hisi_dwc3/ff100000.dwc3/xhci-hcd.1.auto/usb1/1-1/1-1.1/1-1.1:1.0/0003:3938:1059.0001/input/input1
- [ 2.727029] r8168 0000:06:00.0 enp6s0: renamed from eth0
- [ 2.743140] hid-generic 0003:3938:1059.0001: input,hidraw0: USB HID v1.10 Keyboard [MOSART Semi. 2.4G Wireless Keyboard] on usb-xhci-hcd.1.auto-1.1/input0
- [ 2.746590] input: MOSART Semi. 2.4G Wireless Keyboard as /devices/platform/soc/soc:hisi_dwc3/ff100000.dwc3/xhci-hcd.1.auto/usb1/1-1/1-1.1/1-1.1:1.1/0003:3938:1059.0002/input/input2
- [ 2.807569] hid-generic 0003:3938:1059.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [MOSART Semi. 2.4G Wireless Keyboard] on usb-xhci-hcd.1.auto-1.1/input1
- [ 2.890540] usb 1-1.2: new full-speed USB device number 4 using xhci-hcd
- [ 2.962547] [drm] +.
- [ 2.962572] [drm] dss_pwm_clk clk_enable successed, ret=0!
- [ 2.993875] usb 1-1.2: New USB device found, idVendor=3938, idProduct=1031
- [ 2.993883] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 2.993888] usb 1-1.2: Product: 2.4G Wireless Mouse
- [ 2.993893] usb 1-1.2: Manufacturer: MOSART Semi.
- [ 2.998886] input: MOSART Semi. 2.4G Wireless Mouse as /devices/platform/soc/soc:hisi_dwc3/ff100000.dwc3/xhci-hcd.1.auto/usb1/1-1/1-1.2/1-1.2:1.0/0003:3938:1031.0003/input/input3
- [ 3.002978] hid-generic 0003:3938:1031.0003: input,hiddev0,hidraw2: USB HID v1.10 Mouse [MOSART Semi. 2.4G Wireless Mouse] on usb-xhci-hcd.1.auto-1.2/input0
- [ 3.170556] [drm] bl_level is 255
- [ 3.170567] [drm] bl_level=255.
- [ 3.387202] vgaarb: this pci device is not a vga device
- [ 3.637804] vgaarb: this pci device is not a vga device
- [ 3.781813] random: crng init done
- [ 27.908454] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
- [ 28.036778] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
- [ 28.079855] mmc_host mmc1: Bus speed (slot 0) = 25000000Hz (slot req 25000000Hz, actual 25000000HZ div = 0)
- [ 28.556422] wlcore: PHY firmware version: Rev 8.2.0.0.236
- [ 28.663123] wlcore: firmware booted (Rev 8.9.0.0.69)
- [ 28.690725] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
- [ 28.734358] IPv6: ADDRCONF(NETDEV_UP): enp6s0: link is not ready
- [ 28.735865] enp6s0: 0xffff000009bfc000, 10:c1:72:fc:e5:64, IRQ 327
- [ 28.978354] IPv6: ADDRCONF(NETDEV_UP): enp6s0: link is not ready
- [ 29.126904] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement