SHARE
TWEET

Untitled

a guest Sep 9th, 2016 106 Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. Linux video capture interface: v2.00
  2. pps_core: LinuxPPS API ver. 1 registered
  3. pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  4. PTP clock support registered
  5. EDAC MC: Ver: 3.0.0
  6.  
  7.  
  8. U-Boot 2016.03 (Sep 08 2016 - 22:36:59 -0700)
  9.  
  10. Model: Digilent-Zybo-Linux-BD-v2015.4
  11. Board: Xilinx Zynq
  12. I2C:   ready
  13. DRAM:  ECC disabled 512 MiB
  14. MMC:   sdhci@e0100000: 0
  15. SF: Detected S25FL128S_64K with page size 256 Bytes, erase size 64 KiB, total 16 MiB
  16. *** Warning - bad CRC, using default environment
  17.  
  18. In:    serial
  19. Out:   serial
  20. Err:   serial
  21. Net:   ZYNQ GEM: e000b000, phyaddr 1, interface rgmii-id
  22.  
  23. Warning: ethernet@e000b000 using MAC address from ROM
  24. eth0: ethernet@e000b000
  25. U-BOOT for Digilent-Zybo-Linux-BD-v2015_4
  26.  
  27. ethernet@e000b000 Waiting for PHY auto negotiation to complete......... TIMEOUT !
  28. ethernet@e000b000: No link.
  29. Hit any key to stop autoboot:  0
  30. Device: sdhci@e0100000
  31. Manufacturer ID: 1b
  32. OEM: 534d
  33. Name: 00000
  34. Tran Speed: 50000000
  35. Rd Block Len: 512
  36. SD version 3.0
  37. High Capacity: Yes
  38. Capacity: 29.8 GiB
  39. Bus Width: 4-bit
  40. Erase Group Size: 512 Bytes
  41. reading image.ub
  42. 6437736 bytes read in 555 ms (11.1 MiB/s)
  43. ## Loading kernel from FIT Image at 04000000 ...
  44.    Using 'conf@1' configuration
  45.    Verifying Hash Integrity ... OK
  46.    Trying 'kernel@1' kernel subimage
  47.      Description:  PetaLinux Kernel
  48.      Type:         Kernel Image
  49.      Compression:  gzip compressed
  50.      Data Start:   0x040000f0
  51.      Data Size:    6410950 Bytes = 6.1 MiB
  52.      Architecture: ARM
  53.      OS:           Linux
  54.      Load Address: 0x00008000
  55.      Entry Point:  0x00008000
  56.      Hash algo:    crc32
  57.      Hash value:   4b08a1a5
  58.    Verifying Hash Integrity ... crc32+ OK
  59. ## Loading fdt from FIT Image at 04000000 ...
  60.    Using 'conf@1' configuration
  61.    Trying 'fdt@1' fdt subimage
  62.      Description:  Flattened Device Tree blob
  63.      Type:         Flat Device Tree
  64.      Compression:  uncompressed
  65.      Data Start:   0x0461d49c
  66.      Data Size:    25488 Bytes = 24.9 KiB
  67.      Architecture: ARM
  68.      Hash algo:    crc32
  69.      Hash value:   bcb15942
  70.    Verifying Hash Integrity ... crc32+ OK
  71.    Booting using the fdt blob at 0x461d49c
  72.    Uncompressing Kernel Image ... OK
  73.    Loading Device Tree to 07ff6000, end 07fff38f ... OK
  74.  
  75. Starting kernel ...
  76.  
  77. Booting Linux on physical CPU 0x0
  78. Linux version 4.0.0-xilinx (zynq@Zynq) (gcc version 4.9.2 (Sourcery CodeBench Lite 2015.05-17) ) #6 SMP PREEMPT Thu Sep 8 22:37:21 PDT 2016
  79. CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
  80. CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  81. Machine model: Digilent-Zybo-Linux-BD-v2015.4
  82. bootconsole [earlycon0] enabled
  83. cma: Reserved 40 MiB at 0x1d800000
  84. Memory policy: Data cache writealloc
  85. PERCPU: Embedded 11 pages/cpu @dd3bc000 s12672 r8192 d24192 u45056
  86. Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 130048
  87. Kernel command line: console=ttyPS0,115200 earlyprintk
  88. PID hash table entries: 2048 (order: 1, 8192 bytes)
  89. Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  90. Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  91. Memory: 468548K/524288K available (4767K kernel code, 223K rwdata, 1720K rodata, 3044K init, 208K bss, 14780K reserved, 40960K cma-reserved, 0K highmem)
  92. Virtual kernel memory layout:
  93.     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
  94.     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
  95.     vmalloc : 0xe0800000 - 0xff000000   ( 488 MB)
  96.     lowmem  : 0xc0000000 - 0xe0000000   ( 512 MB)
  97.     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
  98.     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
  99.       .text : 0xc0008000 - 0xc065e0dc   (6489 kB)
  100.       .init : 0xc065f000 - 0xc0958000   (3044 kB)
  101.       .data : 0xc0958000 - 0xc098ff60   ( 224 kB)
  102.        .bss : 0xc098ff60 - 0xc09c42f4   ( 209 kB)
  103. Preemptible hierarchical RCU implementation.
  104.         Additional per-CPU info printed with stalls.
  105.         RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
  106. RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
  107. NR_IRQS:16 nr_irqs:16 16
  108. L2C: platform modifies aux control register: 0x72360000 -> 0x72760000
  109. L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000
  110. L2C-310 erratum 769419 enabled
  111. L2C-310 enabling early BRESP for Cortex-A9
  112. L2C-310 full line of zeros enabled for Cortex-A9
  113. L2C-310 ID prefetch enabled, offset 1 lines
  114. L2C-310 dynamic clock gating enabled, standby mode enabled
  115. L2C-310 cache controller enabled, 8 ways, 512 kB
  116. L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001
  117. slcr mapped to e0804000
  118. zynq_clock_init: clkc starts at e0804100
  119. Zynq clock init
  120. sched_clock: 64 bits at 325MHz, resolution 3ns, wraps every 3383112499200ns
  121. timer #0 at e0808000, irq=17
  122. Console: colour dummy device 80x30
  123. Calibrating delay loop... 1292.69 BogoMIPS (lpj=6463488)
  124. pid_max: default: 32768 minimum: 301
  125. Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
  126. Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
  127. CPU: Testing write buffer coherency: ok
  128. CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  129. Setting up static identity map for 0x4836d8 - 0x483730
  130. CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  131. Brought up 2 CPUs
  132. SMP: Total of 2 processors activated (2591.94 BogoMIPS).
  133. CPU: All CPU(s) started in SVC mode.
  134. devtmpfs: initialized
  135. VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
  136. pinctrl core: initialized pinctrl subsystem
  137. NET: Registered protocol family 16
  138. DMA: preallocated 256 KiB pool for atomic coherent allocations
  139. cpuidle: using governor ladder
  140. cpuidle: using governor menu
  141. hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
  142. hw-breakpoint: maximum watchpoint size is 4 bytes.
  143. zynq-ocm f800c000.ocmc: ZYNQ OCM pool: 256 KiB @ 0xe0880000
  144. GPIO IRQ not connected
  145. XGpio: /amba_pl/gpio@41210000: registered, base is 902
  146. XGpio: /amba_pl/gpio@41230000: registered, base is 901
  147. GPIO IRQ not connected
  148. XGpio: /amba_pl/gpio@41250000: registered, base is 899
  149. GPIO IRQ not connected
  150. XGpio: /amba_pl/gpio@41250000: dual channel registered, base is 897
  151. GPIO IRQ not connected
  152. XGpio: /amba_pl/gpio@41200000: registered, base is 893
  153. GPIO IRQ not connected
  154. XGpio: /amba_pl/gpio@41260000: registered, base is 889
  155. GPIO IRQ not connected
  156. XGpio: /amba_pl/gpio@41220000: registered, base is 885
  157. GPIO IRQ not connected
  158. XGpio: /amba_pl/gpio@41240000: registered, base is 883
  159. GPIO IRQ not connected
  160. XGpio: /amba_pl/gpio@41240000: dual channel registered, base is 879
  161. vgaarb: loaded
  162. SCSI subsystem initialized
  163. usbcore: registered new interface driver usbfs
  164. usbcore: registered new interface driver hub
  165. usbcore: registered new device driver usb
  166. usb_phy@0 supply vcc not found, using dummy regulator
  167. media: Linux media interface: v0.10
  168.        .bss : 0xc098ff60 - 0xc09c42f4   ( 209 kB)
  169. Preemptible hierarchical RCU implementation.
  170.         Additional per-CPU info printed with stalls.
  171.         RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
  172. RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
  173. NR_IRQS:16 nr_irqs:16 16
  174. L2C: platform modifies aux control register: 0x72360000 -> 0x72760000
  175. L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000
  176. L2C-310 erratum 769419 enabled
  177. L2C-310 enabling early BRESP for Cortex-A9
  178. L2C-310 full line of zeros enabled for Cortex-A9
  179. L2C-310 ID prefetch enabled, offset 1 lines
  180. L2C-310 dynamic clock gating enabled, standby mode enabled
  181. L2C-310 cache controller enabled, 8 ways, 512 kB
  182. L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001
  183. slcr mapped to e0804000
  184. zynq_clock_init: clkc starts at e0804100
  185. Zynq clock init
  186. sched_clock: 64 bits at 325MHz, resolution 3ns, wraps every 3383112499200ns
  187. timer #0 at e0808000, irq=17
  188. Console: colour dummy device 80x30
  189. Calibrating delay loop... 1292.69 BogoMIPS (lpj=6463488)
  190. pid_max: default: 32768 minimum: 301
  191. Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
  192. Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
  193. CPU: Testing write buffer coherency: ok
  194. CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  195. Setting up static identity map for 0x4836d8 - 0x483730
  196. CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  197. Brought up 2 CPUs
  198. SMP: Total of 2 processors activated (2591.94 BogoMIPS).
  199. CPU: All CPU(s) started in SVC mode.
  200. devtmpfs: initialized
  201. VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
  202. pinctrl core: initialized pinctrl subsystem
  203. NET: Registered protocol family 16
  204. DMA: preallocated 256 KiB pool for atomic coherent allocations
  205. cpuidle: using governor ladder
  206. cpuidle: using governor menu
  207. hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
  208. hw-breakpoint: maximum watchpoint size is 4 bytes.
  209. zynq-ocm f800c000.ocmc: ZYNQ OCM pool: 256 KiB @ 0xe0880000
  210. GPIO IRQ not connected
  211. XGpio: /amba_pl/gpio@41210000: registered, base is 902
  212. XGpio: /amba_pl/gpio@41230000: registered, base is 901
  213. GPIO IRQ not connected
  214. XGpio: /amba_pl/gpio@41250000: registered, base is 899
  215. GPIO IRQ not connected
  216. XGpio: /amba_pl/gpio@41250000: dual channel registered, base is 897
  217. GPIO IRQ not connected
  218. XGpio: /amba_pl/gpio@41200000: registered, base is 893
  219. GPIO IRQ not connected
  220. XGpio: /amba_pl/gpio@41260000: registered, base is 889
  221. GPIO IRQ not connected
  222. XGpio: /amba_pl/gpio@41220000: registered, base is 885
  223. GPIO IRQ not connected
  224. XGpio: /amba_pl/gpio@41240000: registered, base is 883
  225. GPIO IRQ not connected
  226. XGpio: /amba_pl/gpio@41240000: dual channel registered, base is 879
  227. vgaarb: loaded
  228. SCSI subsystem initialized
  229. usbcore: registered new interface driver usbfs
  230. usbcore: registered new interface driver hub
  231. usbcore: registered new device driver usb
  232. usb_phy@0 supply vcc not found, using dummy regulator
  233. media: Linux media interface: v0.10
  234. Linux video capture interface: v2.00
  235. pps_core: LinuxPPS API ver. 1 registered
  236. pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  237. PTP clock support registered
  238. EDAC MC: Ver: 3.0.0
  239. Advanced Linux Sound Architecture Driver Initialized.
  240. Switched to clocksource arm_global_timer
  241. NET: Registered protocol family 2
  242. TCP established hash table entries: 4096 (order: 2, 16384 bytes)
  243. TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
  244. TCP: Hash tables configured (established 4096 bind 4096)
  245. TCP: reno registered
  246. UDP hash table entries: 256 (order: 1, 8192 bytes)
  247. UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
  248. NET: Registered protocol family 1
  249. RPC: Registered named UNIX socket transport module.
  250. RPC: Registered udp transport module.
  251. RPC: Registered tcp transport module.
  252. RPC: Registered tcp NFSv4.1 backchannel transport module.
  253. hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
  254. futex hash table entries: 512 (order: 3, 32768 bytes)
  255. jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
  256. io scheduler noop registered
  257. io scheduler deadline registered
  258. io scheduler cfq registered (default)
  259. zynq-pinctrl 700.pinctrl: zynq pinctrl initialized
  260. dma-pl330 f8003000.dmac: Loaded driver for PL330 DMAC-241330
  261. dma-pl330 f8003000.dmac:        DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
  262. xilinx-vdma 43000000.dma: Xilinx AXI VDMA Engine Driver Probed!!
  263. e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 145, base_baud = 6250000) is a xuartps
  264. console [ttyPS0] enabled
  265. bootconsole [earlycon0] disabled
RAW Paste Data
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy. OK, I Understand
 
Top