vinderhruting

esphome:
  name: vindriktning
  friendly_name: Vindriktning
  on_boot:
   priority: 600.0
   then:
     - light.turn_on:
         id: ikea_light
         effect: "Effect1"
         red: 0%
         green: 0%
         blue: 100%

esp32:
  board: esp32dev
  framework:
    type: arduino

logger:
  baud_rate: 0
# Enable Home Assistant API
api:
  encryption:
    key: "Rh+s/Wj6EN61vecPYib5qnFwb7qnBiYC6Z4Ru2kVuS0="

ota:
  password: "ee51b15d8570c640dfc67e6a00675e90"

wifi:
  ssid: !secret wifi_ssid
  password: !secret wifi_password

  # Enable fallback hotspot (captive portal) in case wifi connection fails
  ap:
    ssid: "Vindriktning Fallback Hotspot"
    password: "MvF9FCTn6aI6"
  on_connect:
    - light.turn_off: ikea_light
  on_disconnect:
      - light.turn_on:
         id: ikea_light
         effect: "Effect1"
         red: 0%
         green: 0%
         blue: 100%

captive_portal:
web_server:
  port: 80
time: # Время берем из Home Assistant
  - platform: homeassistant
    id: homeassistant_time


switch:
  - platform: restart # Переключатель перезагрузки устройства
    name: "Restart_Ikea"

i2c:
  sda: 21
  scl: 22
  scan: true
  id: bus_a

uart:
  rx_pin: GPIO26
  baud_rate: 9600
#  id: uart_rx
#  debug:
#    direction: RX
#    dummy_receiver: true
#    after:
#      delimiter: "\r\n"
#    sequence:
#      - lambda: |-
#          UARTDebug::log_string(direction, bytes);  //Still log the data
#          uint8_t checksum = 0;
#          for (int i=0; i < bytes.size(); i++) {
#            checksum+= bytes[i];
#          }
#          if (checksum==0){
#            ESP_LOGD("UART","PM1006|PM1006k checksum validated, have %d", checksum);
#            if (bytes.size()==20 and (bytes[0]==22 and bytes[1]==17 and bytes[2]==11)) {
#              ESP_LOGD("UART", "Correct PM1006 response recieved. Updating sensors");
#              id(ikea_pm2).publish_state(bytes[5]*256+bytes[6]);
#              id(ikea_pm1).publish_state(bytes[9]*256+bytes[10]);
#              id(ikea_pm10).publish_state(bytes[13]*256+bytes[14]);
#            }
#            if (bytes.size()==16 and (bytes[0]==22 and bytes[1]==13 and bytes[2]==2)) {
#              ESP_LOGD("UART", "Correct PM1006K response recieved. Updating sensors");
#              id(ikea_pm2).publish_state(bytes[5]*256+bytes[6]);
#              id(ikea_pm1).publish_state(bytes[9]*256+bytes[10]);
#              id(ikea_pm10).publish_state(bytes[13]*256+bytes[14]);
#            }
#          }
#          else{
#            ESP_LOGW("UART","PM1006|PM1006k checksum is wrong: %02x, expected zero. Sensors will not be updated", checksum);
#          }

light:
  - platform: neopixelbus
    type: GRB
    variant: WS2812
    pin: GPIO14
    num_leds: 7
    name: "ikea_color"
    id: "ikea_light"
    internal: true
    effects:
     - pulse:
          name: "Effect1"
          transition_length: 0.5s
          update_interval: 0.5s
          min_brightness: 10%
          max_brightness: 60%
  - platform: partition
    name: "ikea_partition1"
    id: "ikea_light1"
    internal: true
    segments:
      # Use first 3 LEDs from the light with ID light1
      - id: ikea_light
        from: 0
        to: 2
  - platform: partition
    name: "ikea_partition2"
    id: "ikea_light2"
    internal: true
    segments:
      # Use LEDs 3-6 from the light with ID light1
      - id: ikea_light
        from: 3
        to: 6
    effects:
      - pulse:
          name: "Effect3"
          transition_length: 1s
          update_interval: 1s
          min_brightness: 20%
          max_brightness: 50%


sensor:
  - platform: pm1006
    pm_2_5:
      name: "IKEA-BD 2.5µm Concentration"
      id: ikea_pm_2

#  - platform: template
#    name: "Ikea PM25"
#    icon: "mdi:blur"
#    id: "ikea_pm2"
#    device_class: PM25
#    accuracy_decimals: 0
#    unit_of_measurement: µg/m³

#  - platform: template
#    name: "Ikea PM10 "
#    icon: "mdi:blur"
#    id: "ikea_pm10"
#    device_class: PM10
#    accuracy_decimals: 0
#    unit_of_measurement: µg/m³
  - platform: uptime
    name: "Uptime_Ikea"

  #### scd41 CO2
  - platform: scd4x
    automatic_self_calibration: false
    temperature_offset: 4
    id: "ikea_scd41"
    co2:
      name: "Ikea CO2"
      id: "ikea_co2"
    temperature:
      name: "Ikea CO2 Temperature"
      accuracy_decimals: 1
    humidity:
      name: "Ikea CO2 Humidity"
      accuracy_decimals: 0

  #### bme280
  - platform: bme280_i2c
    temperature:
      name: "Ikea Temperature"
      oversampling: 16x
    pressure:
      name: "Ikea Pressure"
    humidity:
      name: "Ikea Humidity"
    address: 0x76
    update_interval: 60s

  #### LD2410
#  ld2410:
#  uart_id: uart_0

binary_sensor:
  - platform: gpio
    pin: 5
    name: IKEA-BD Presence
    device_class: presence
#  - platform: ld2410
#    has_target:
#      name: "presence_IKEA"
#    has_moving_target:
#      name: "moving_target_IKEA"
#    has_still_target:
#      name: "still_target_IKEA"
#number:

#  - platform: ld2410
#    timeout:
#      name: timeout_IKEA
#      internal : false
#    light_threshold:
#      name: light_threshold_IKEA
#      internal : false
#    max_move_distance_gate:
#      name: max_move_distance_gate_IKEA
#      internal : false
#    max_still_distance_gate:
#      name: max_still_distance_gate_IKEA
#      internal : false

#select:
#  - platform: ld2410
#    distance_resolution:
#      name: "distance_resolution_IKEA"
#      internal : false
#    baud_rate:
#      name: "baud rate_IKEA"
#      internal : false
#    light_function:
#      name: light_function_IKEA
#      internal : false
#    out_pin_level:
#      name: out_pin_level_IKEA
#      internal : false

button:
#  - platform: ld2410
#    factory_reset:
#      name: "factory_reset_IKEA"
#      internal : false
#    restart:
#      name: "restart_IKEA"
#      internal : false
#    query_params:
#      name: query_params_IKEA
#      internal : false
  - platform: safe_mode
    name: "IKEA-BD (Safe Mode)"
  - platform: restart
    name: "IKEA-BD Restart"

interval:
  - interval: 60s
    then:
      - if:
          condition:
            sensor.in_range:
              id: ikea_co2
              above: 0
              below: 800
          then:
              - light.turn_on:
                  id: ikea_light2
                  red: 0%
                  green: 100%
                  blue: 0%
                  brightness: 20%
                  effect: None
                  color_mode: RGB
      - if:
          condition:
            sensor.in_range:
              id: ikea_co2
              above: 800
              below: 1000
          then:
              - light.turn_on:
                  id: ikea_light2
                  red: 98%
                  green: 78%
                  blue: 47%
                  brightness: 20%
                  effect: None
                  color_mode: RGB
      - if:
          condition:
            sensor.in_range:
              id: ikea_co2
              above: 1000
              below: 1500
          then:
              - light.turn_on:
                  id: ikea_light2
                  red: 100%
                  green: 0%
                  blue: 0%
                  brightness: 20%
                  effect: None
                  color_mode: RGB
      - if:
          condition:
            sensor.in_range:
              id: ikea_co2
              above: 1500
          then:
            - light.turn_on:
                id: ikea_light2
                effect: "Effect3"
                red: 100%
                green: 0%
                blue: 0%
      - if:
          condition:
            sensor.in_range:
              id: ikea_pm_2
              above: 0
              below: 35
          then:
            - light.turn_on:
                id: ikea_light1
                red: 0%
                green: 100%
                blue: 0%
                brightness: 20%
                effect: None
      - if:
          condition:
            sensor.in_range:
              id: ikea_pm_2
              above: 0
              below: 35
          then:
            - light.turn_on:
                id: ikea_light1
                red: 0%
                green: 100%
                blue: 0%
                brightness: 20%
                effect: None
      - if:
          condition:
            sensor.in_range:
              id: ikea_pm_2
              above: 35
              below: 85
          then:
            - light.turn_on:
                id: ikea_light1
                red: 98%
                green: 78%
                blue: 47%
                brightness: 20%
                effect: None
      - if:
          condition:
            sensor.in_range:
              id: ikea_pm_2
              above: 85
          then:
            - light.turn_on:
                id: ikea_light1
                red: 100%
                green: 0%
                blue: 0%
                brightness: 20%
                effect: None