Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [2015-09-27 11:34:14] [Output] : ★ Julio Lopez clicks a button inside the vehicle - turning the hood up; opening it.
- [2015-09-27 11:36:41] [Output] : ★ Julio Lopez starts pulling up the body kit lip off as he places his fingers under it - unclipping
- [2015-09-27 11:36:44] [Output] : ★ it and pulling it upwards. ((Julio Lopez))
- [2015-09-27 11:36:54] [Output] : ★ Bolts on the bumper would now be visible. ((Julio Lopez))
- [2015-09-27 11:37:04] [Output] : ★ Julio Lopez places the body kit lip onto the floor, then inspects the bolts' size.
- [2015-09-27 11:37:27] [Output] : ★ Julio Lopez reaches into the duffelbag, taking out a 17mm ratchet and socket, then places the socket
- [2015-09-27 11:37:52] [Output] : ★ onto each bolt which he now sees and starts unscrewing them. ((Julio Lopez))
- [2015-09-27 11:38:31] [Output] : ★ Julio Lopez turns his head towards the side of the vehicle, unscrewing a bolt holding down the bumper
- [2015-09-27 11:38:36] [Output] : ★ at the edge of it - near the fender. ((Julio Lopez))
- [2015-09-27 11:38:56] [Output] : ★ Julio Lopez repeats the procedure for a bolt on the other side of the bumper.
- [2015-09-27 11:39:27] [Output] : ★ Julio Lopez places his hands under the bumper, then starts removing it from the vehicle - unclipping
- [2015-09-27 11:39:46] [Output] : ★ the remaining clips if any - then gently places the bumper onto the floor. ((Julio Lopez))
- [2015-09-27 11:40:11] [Output] : ★ Julio Lopez inspects the now visible stock inter-cooler.
- [2015-09-27 11:40:35] [Output] : ★ The intercooler is top mounted. ((Alexander Rinkk))
- [2015-09-27 11:40:42] [Output] : ★ On subarus, not front mounted. ((Alexander Rinkk))
- [2015-09-27 11:42:04] [Output] : ★ Julio Lopez reaches for the ratchet once more, then starts removing the bolts holding down the current
- [2015-09-27 11:42:19] [Output] : ★ intercooler, placing each bolt onto the floor next to the duffelbag - ensuring they do not r ((Julio Lopez))
- [2015-09-27 11:42:22] [Output] : ★ -oll off. ((Julio Lopez))
- [2015-09-27 11:51:20] [Output] : ★ Julio Lopez reaches into the duffelbag, taking out 12mm socket and ratchet, then removes two 12mm
- [2015-09-27 11:51:35] [Output] : ★ bolts holding the bypass valve to the intercooler. ((Julio Lopez))
- [2015-09-27 11:51:38] [Output] : ★ Julio Lopez then places down the bolts near the duffelbag.
- [2015-09-27 11:51:59] [Output] : ★ Julio Lopez removes 12mm bolts holding the intercooler to the support brackets, then places
- [2015-09-27 11:52:00] [Output] : ★ them down near the duffelbag. ((Julio Lopez))
- [2015-09-27 11:52:21] [Output] : ★ Julio Lopez starts disconnceting the three engine breather hoses from the block metal crossover pipe by
- [2015-09-27 11:52:23] [Output] : ★ sliding them off. ((Julio Lopez))
- [2015-09-27 11:54:07] [Output] : ★ Julio Lopez reaches for a phillips screwdriver and starts loosing up the two hose clamps securing the
- [2015-09-27 11:54:25] [Output] : ★ hose between the engine cooler and the throttle body. ((Julio Lopez))
- [2015-09-27 11:55:10] [Output] : ★ Julio Lopez also loosens the hose clamp connecting the intercooler to the current turbo.
- [2015-09-27 11:55:28] [Output] : ★ Julio Lopez proceeds to remove the turbo by pushing the intercooler diagonally towards the driver
- [2015-09-27 11:55:35] [Output] : ★ door and wiggling the intercooler upwards as he does so. ((Julio Lopez))
- [2015-09-27 11:56:02] [Output] : ★ Julio Lopez places the old intercooler onto the counter.
- [2015-09-27 11:59:15] [Output] : ★ Julio Lopez reaches into the duffelbag for an impact gun, then starts removing the bolts that hold
- [2015-09-27 11:59:20] [Output] : ★ the bumper support in place. ((Julio Lopez))
- [2015-09-27 11:59:52] [Output] : ★ Julio Lopez reaches for the duffelbag once more - taking out a meter and a small marker as he
- [2015-09-27 12:00:09] [Output] : ★ measures the halfway onto the bumper support, then places a small mark to know where ((Julio Lopez))
- [2015-09-27 12:00:16] [Output] : ★ to mount the new front intercooler later on. ((Julio Lopez))
- [2015-09-27 12:00:43] [Output] : ★ Julio Lopez proceeds to remove the bumper support by firmly pushing it backwards - having no bolts on
- [2015-09-27 12:00:53] [Output] : ★ to prevent Julio from doing so, then places it down onto the floor. ((Julio Lopez))
- [2015-09-27 12:01:43] [Output] : ★ Julio Lopez starts measuring the new intercooler's width, then continues placing markings for
- [2015-09-27 12:01:52] [Output] : ★ the upcoming installation. ((Julio Lopez))
- [2015-09-27 12:08:49] [Output] : ★ Julio Lopez places the bumper support onto the counter, then connects the angle grinder and reaches
- [2015-09-27 12:09:01] [Output] : ★ for a grinding face mask - putting it on. ((Julio Lopez))
- [2015-09-27 12:11:41] [Output] : ★ Julio Lopez proceeds to cut the bumper support horizontally - cutting off the markings traced earlier
- [2015-09-27 12:11:51] [Output] : ★ as to reduce the height of the bumper support. ((Julio Lopez))
- [2015-09-27 12:12:54] [Output] : ★ The bumper support would have a considerable amount of it now separated. ((Julio Lopez))
- [2015-09-27 12:15:23] [Output] : ★ Julio Lopez grinds off the sharp edges on the bumper support, then places down the angle grinder then
- [2015-09-27 12:15:37] [Output] : ★ reaches for a polymeric coating spray, spraying it over the bumper support. ((Julio Lopez))
- [2015-09-27 12:15:48] [Output] : ★ Julio Lopez then proceeds to place the cut down bumper support into place.
- [2015-09-27 12:15:54] [Output] : ★ -... Into the vehicle. ((Julio Lopez))
- [2015-09-27 12:16:14] [Output] : ★ The bar would fit. ((Julio Lopez))
- [2015-09-27 12:16:22] [Output] : ★ Julio Lopez places the bar off, then places it onto the floor.
- [2015-09-27 12:20:47] [Output] : ★ Julio Lopez then reaches for the new intercooler and proceeds to mount it as a Front Side Intercooler,
- [2015-09-27 12:21:25] [Output] : ★ tying up the wiring on the top-side bolts onto the hood, then proceeds to place the ((Julio Lopez))
- [2015-09-27 12:21:42] [Output] : ★ pipe connectors onto the intercooler's sides, then places the clamps ontop of the pipe ((Julio Lopez))
- [2015-09-27 12:22:13] [Output] : ★ connectors, then connects the pipes themselves to the intercooler, which extend ((Julio Lopez))
- [2015-09-27 12:29:07] [Output] : ★ from under the hood, into the old turbo manifold. ((Julio Lopez))
- [2015-09-27 12:29:31] [Output] : ★ Julio Lopez raises the lift on the vehicle, then reaches for a container as he places it under the vehic
- [2015-09-27 12:29:40] [Output] : ★ -le, and rotates the engine oil valve; emptying it into the container. ((Julio Lopez))[2015-09-27 12:32:30] [Output] : ★ Julio Lopez does not tighten back the engine header; as he was simply testing it for size, then proceeds
- [2015-09-27 12:32:48] [Output] : ★ to reach into the box containing the new turbo, and attaches the turbo to its accompanying n ((Julio Lopez))
- [2015-09-27 12:33:12] [Output] : ★ -ew header. ((Julio Lopez))
- [2015-09-27 12:33:31] [Output] : ★ Julio Lopez proceeds to remove the old turbo and header, then places the new turbocharger with
- [2015-09-27 12:33:38] [Output] : ★ its header into place; replacing them. ((Julio Lopez))
- [2015-09-27 12:34:47] [Output] : ★ Julio would have to remove the battery to give him clearance on doing so; which Julio ((Julio Lopez))
- [2015-09-27 12:35:24] [Output] : ★ does by loosening the nuts on the battery's terminals, starting with the negative, then remo ((Julio Lopez))
- [2015-09-27 12:35:36] [Output] : ★ -ving the cables and pulling the battery upwards from its handles, then gently dropping ((Julio Lopez))
- [2015-09-27 12:35:40] [Output] : ★ it onto the ground. ((Julio Lopez))
- [2015-09-27 12:36:44] [Output] : ★ Julio Lopez proceeds to tighten up the connection between the new turbocharger and the intercooler
- [2015-09-27 12:36:49] [Output] : ★ pipes. ((Julio Lopez))
- [2015-09-27 12:40:55] [Output] : ★ The turbocharger would have no plugs/plastic on it. ((Julio Lopez))
- [2015-09-27 12:41:35] [Output] : ★ Julio Lopez examines the oil feed and drain lines - ensuring they are clean and are undamaged.
- [2015-09-27 12:41:45] [Output] : ★ Julio Lopez ensures that no flexible hose liners have collapsed internally.
- [2015-09-27 12:42:16] [Output] : ★ Julio Lopez proceeds to fit a new oil inlet pipe - removing the old one and replacing it.
- [2015-09-27 12:42:52] [Output] : ★ Julio Lopez installs an oil drain line onto the turbo charger - bolting it into place using a 17mm ratch
- [2015-09-27 12:43:09] [Output] : ★ -et and socket, and using the same bolts used for the previous turbocharger. ((Julio Lopez))
- [2015-09-27 12:44:01] [Output] : ★ Julio Lopez starts pouring new engine oil into the oil inlet hole of the turbo charger and fits the oil
- [2015-09-27 12:44:02] [Output] : ★ feed line. ((Julio Lopez))
- [2015-09-27 12:44:22] [Output] : ★ Julio Lopez starts compressing the compressor wheel by his left hand a few times - ensuring it spins fre
- [2015-09-27 12:44:23] [Output] : ★ -ely. ((Julio Lopez))
- [2015-09-27 12:44:46] [Output] : ★ Julio Lopez starts installing the inlet and outlet air hoses to the turbocharger compressor housing
- [2015-09-27 12:44:52] [Output] : ★ and ensures the connection is air tight. ((Julio Lopez))
- [2015-09-27 12:45:30] [Output] : ★ Julio Lopez cranks the engine for 15 seconds to prime oil feed without starting the engine.
- [2015-09-27 12:45:52] [Output] : ★ Julio Lopez then starts the engine and allows it to run idle for a couple of minutes.
- [2015-09-27 12:46:23] [Output] : ((OOC Chance at 10%)) Julio Lopez's attempt has failed.
- [2015-09-27 12:46:33] [Output] : ★ No leakage occurs. ((Julio Lopez))
- [2015-09-27 12:47:26] [Output] : ★ Julio Lopez stops the engine, then starts checking on the engine oil level as he pulls up the meter.
- [2015-09-27 12:47:49] [Output] : ★ Oil level should be between minimum - maximum, considering he had just filled the vehicle. ((Julio Lopez))
- [2015-09-27 12:55:13] [Output] : ★ Julio Lopez reaches for the bumper on the ground, then pushes it back into place - then proceeds
- [2015-09-27 12:55:31] [Output] : ★ to reach for the bolts on the ground, and the 17mm ratchet and socket, and screws ((Julio Lopez))
- [2015-09-27 12:55:42] [Output] : ★ the bolts into place; tightening the bumper into place. ((Julio Lopez))
- [2015-09-27 12:56:31] [Output] : ★ Julio Lopez then reaches for the body kit lip and places it back into position - clipping it back on.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement