API tools faq
paste
Advertisement
hugh_1977

KV260 2022 boot firmware fail

hugh_1977
Sep 8th, 2022
845
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 29.00 KB | None | 0 0
raw download clone embed print report
  1. ▒Xilinx Zynq MP First Stage Boot Loader
  2. Release 2022.1 Apr 11 2022 - 09:29:50
  3. MultiBootOffset: 0x40
  4. Reset Mode : System Reset
  5. Platform: Silicon (4.0), Running on A53-0 (64-bit) Processor, Device Name: XCZUUNKNEG
  6. QSPI 32 bit Boot Mode
  7. FlashID=0x20 0xBB 0x20
  8. ▒NOTICE: BL31: v2.6(release):xlnx_rebase_v2.6_2022.1
  9. NOTICE: BL31: Built : 03:46:40, Mar 24 2022
  10.  
  11.  
  12. U-Boot 2022.01 (May 12 2022 - 17:12:22 +0000)
  13.  
  14. CPU: ZynqMP
  15. Silicon: v3
  16. Detected name: zynqmp-smk-k26-xcl2g-rev1-sck-kv-g-rev1
  17. Model: ZynqMP SMK-K26 Rev1/B/A
  18. Board: Xilinx ZynqMP
  19. DRAM: 4 GiB
  20. PMUFW: v1.1
  21. Xilinx I2C FRU format at nvmem0:
  22. Manufacturer Name: XILINX
  23. Product Name: SMK-K26-XCL2G
  24. Serial No: XFL1IGK2KKU1
  25. Part Number: 5057-01
  26. File ID: 0x0
  27. Revision Number: 1
  28. Xilinx I2C FRU format at nvmem1:
  29. Manufacturer Name: XILINX
  30. Product Name: SCK-KV-G
  31. Serial No: XFL1GU0GIOUE
  32. Part Number: 5066-01
  33. File ID: 0x0
  34. Revision Number: 1
  35. EL Level: EL2
  36. Chip ID: xck26
  37. NAND: 0 MiB
  38. MMC: mmc@ff170000: 1
  39. Loading Environment from nowhere... OK
  40. In: serial
  41. Out: serial
  42. Err: serial
  43. Bootmode: QSPI_MODE
  44. Reset reason: SOFT
  45. Net:
  46. ZYNQ GEM: ff0e0000, mdio bus ff0e0000, phyaddr 1, interface rgmii-id
  47. PHY reset timed out
  48. eth0: ethernet@ff0e0000
  49. gpio: pin gpio@ff0a000038 (gpio 38) value is 0
  50. gpio: pin gpio@ff0a000038 (gpio 38) value is 1
  51. starting USB...
  52. Bus usb@fe200000: Register 2000440 NbrPorts 2
  53. Starting the controller
  54. USB XHCI 1.00
  55. scanning bus usb@fe200000 for devices... 4 USB Device(s) found
  56. scanning usb for storage devices... 0 Storage Device(s) found
  57. Hit any key to stop autoboot: 0
  58. model=SMK-K26-XCL2G
  59. switch to partitions #0, OK
  60. mmc1 is current device
  61. Scanning mmc 1:1...
  62. Found U-Boot script /boot.scr
  63. 2777 bytes read in 21 ms (128.9 KiB/s)
  64. ## Executing script at 20000000
  65. Trying to load boot images from mmc1
  66. 22401536 bytes read in 1464 ms (14.6 MiB/s)
  67. 45704 bytes read in 24 ms (1.8 MiB/s)
  68. 23215094 bytes read in 1519 ms (14.6 MiB/s)
  69. ## Loading init Ramdisk from Legacy Image at 04000000 ...
  70. Image Name: petalinux-initramfs-image-xilinx
  71. Created: 2011-04-05 23:00:00 UTC
  72. Image Type: AArch64 Linux RAMDisk Image (uncompressed)
  73. Data Size: 23215030 Bytes = 22.1 MiB
  74. Load Address: 00000000
  75. Entry Point: 00000000
  76. Verifying Checksum ... OK
  77. ## Flattened Device Tree blob at 00100000
  78. Booting using the fdt blob at 0x100000
  79. Loading Ramdisk to 779dc000, end 78fffbb6 ... OK
  80. Loading Device Tree to 000000000fff1000, end 000000000ffff287 ... OK
  81.  
  82. Starting kernel ...
  83.  
  84. [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
  85. [ 0.000000] Linux version 5.15.19-xilinx-v2022.1 (oe-user@oe-host) (aarch64-xilinx-linux-gcc (GCC) 11.2.0, GNU ld (GNU Binutils) 2.37.20210721) #1 SMP Mon Apr 11 17:52:14 UTC 2022
  86. [ 0.000000] Machine model: ZynqMP SMK-K26 Rev1/B/A
  87. [ 0.000000] earlycon: cdns0 at MMIO 0x00000000ff010000 (options '115200n8')
  88. [ 0.000000] printk: bootconsole [cdns0] enabled
  89. [ 0.000000] efi: UEFI not found.
  90. [ 0.000000] Zone ranges:
  91. [ 0.000000] DMA32 [mem 0x0000000000000000-0x00000000ffffffff]
  92. [ 0.000000] Normal [mem 0x0000000100000000-0x000000087fffffff]
  93. [ 0.000000] Movable zone start for each node
  94. [ 0.000000] Early memory node ranges
  95. [ 0.000000] node 0: [mem 0x0000000000000000-0x000000003ecfffff]
  96. [ 0.000000] node 0: [mem 0x000000003ed00000-0x000000003ee47fff]
  97. [ 0.000000] node 0: [mem 0x000000003ee48000-0x000000007fefffff]
  98. [ 0.000000] node 0: [mem 0x0000000800000000-0x000000087fffffff]
  99. [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000087fffffff]
  100. [ 0.000000] On node 0, zone Normal: 256 pages in unavailable ranges
  101. [ 0.000000] cma: Reserved 900 MiB at 0x000000003f400000
  102. [ 0.000000] psci: probing for conduit method from DT.
  103. [ 0.000000] psci: PSCIv1.1 detected in firmware.
  104. [ 0.000000] psci: Using standard PSCI v0.2 function IDs
  105. [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
  106. [ 0.000000] psci: SMC Calling Convention v1.2
  107. [ 0.000000] percpu: Embedded 18 pages/cpu s34776 r8192 d30760 u73728
  108. [ 0.000000] Detected VIPT I-cache on CPU0
  109. [ 0.000000] CPU features: detected: ARM erratum 845719
  110. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1031940
  111. [ 0.000000] Kernel command line: earlycon console=ttyPS1,115200 clk_ignore_unused init_fatal_sh=1 cma=900M
  112. [ 0.000000] Unknown kernel command line parameters "init_fatal_sh=1", will be passed to user space.
  113. [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
  114. [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
  115. [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
  116. [ 0.000000] software IO TLB: mapped [mem 0x000000007bf00000-0x000000007ff00000] (64MB)
  117. [ 0.000000] Memory: 3078464K/4193280K available (14528K kernel code, 1012K rwdata, 4056K rodata, 2176K init, 571K bss, 193216K reserved, 921600K cma-reserved)
  118. [ 0.000000] rcu: Hierarchical RCU implementation.
  119. [ 0.000000] rcu: RCU event tracing is enabled.
  120. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
  121. [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
  122. [ 0.000000] GIC: Adjusting CPU interface base to 0x00000000f902f000
  123. [ 0.000000] Root IRQ handler: gic_handle_irq
  124. [ 0.000000] GIC: Using split EOI/Deactivate mode
  125. [ 0.000000] random: get_random_bytes called from start_kernel+0x474/0x6d4 with crng_init=0
  126. [ 0.000000] arch_timer: cp15 timer(s) running at 99.99MHz (phys).
  127. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x171015c90f, max_idle_ns: 440795203080 ns
  128. [ 0.000000] sched_clock: 56 bits at 99MHz, resolution 10ns, wraps every 4398046511101ns
  129. [ 0.008301] Console: colour dummy device 80x25
  130. [ 0.012397] Calibrating delay loop (skipped), value calculated using timer frequency.. 199.99 BogoMIPS (lpj=399996)
  131. [ 0.022753] pid_max: default: 32768 minimum: 301
  132. [ 0.027506] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
  133. [ 0.034699] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
  134. [ 0.043436] rcu: Hierarchical SRCU implementation.
  135. [ 0.047486] EFI services will not be available.
  136. [ 0.051863] smp: Bringing up secondary CPUs ...
  137. [ 0.056572] Detected VIPT I-cache on CPU1
  138. [ 0.056610] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
  139. [ 0.056979] Detected VIPT I-cache on CPU2
  140. [ 0.057000] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
  141. [ 0.057339] Detected VIPT I-cache on CPU3
  142. [ 0.057360] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
  143. [ 0.057400] smp: Brought up 1 node, 4 CPUs
  144. [ 0.091692] SMP: Total of 4 processors activated.
  145. [ 0.096364] CPU features: detected: 32-bit EL0 Support
  146. [ 0.101468] CPU features: detected: CRC32 instructions
  147. [ 0.106604] CPU: All CPU(s) started at EL2
  148. [ 0.110648] alternatives: patching kernel code
  149. [ 0.116059] devtmpfs: initialized
  150. [ 0.123880] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  151. [ 0.128033] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
  152. [ 0.160038] pinctrl core: initialized pinctrl subsystem
  153. [ 0.160511] DMI not present or invalid.
  154. [ 0.163675] NET: Registered PF_NETLINK/PF_ROUTE protocol family
  155. [ 0.170272] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations
  156. [ 0.176408] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
  157. [ 0.184229] audit: initializing netlink subsys (disabled)
  158. [ 0.189637] audit: type=2000 audit(0.132:1): state=initialized audit_enabled=0 res=1
  159. [ 0.189976] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  160. [ 0.204057] ASID allocator initialised with 65536 entries
  161. [ 0.209463] Serial: AMBA PL011 UART driver
  162. [ 0.231036] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
  163. [ 0.232099] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
  164. [ 0.238769] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
  165. [ 0.245430] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
  166. [ 1.214620] cryptd: max_cpu_qlen set to 1000
  167. [ 1.236985] DRBG: Continuing without Jitter RNG
  168. [ 1.336753] raid6: neonx8 gen() 2367 MB/s
  169. [ 1.404808] raid6: neonx8 xor() 1763 MB/s
  170. [ 1.472860] raid6: neonx4 gen() 2419 MB/s
  171. [ 1.540912] raid6: neonx4 xor() 1729 MB/s
  172. [ 1.608973] raid6: neonx2 gen() 2296 MB/s
  173. [ 1.677021] raid6: neonx2 xor() 1578 MB/s
  174. [ 1.745093] raid6: neonx1 gen() 1961 MB/s
  175. [ 1.813134] raid6: neonx1 xor() 1348 MB/s
  176. [ 1.881190] raid6: int64x8 gen() 1518 MB/s
  177. [ 1.949245] raid6: int64x8 xor() 859 MB/s
  178. [ 2.017315] raid6: int64x4 gen() 1776 MB/s
  179. [ 2.085357] raid6: int64x4 xor() 942 MB/s
  180. [ 2.153427] raid6: int64x2 gen() 1552 MB/s
  181. [ 2.221482] raid6: int64x2 xor() 834 MB/s
  182. [ 2.289556] raid6: int64x1 gen() 1146 MB/s
  183. [ 2.357604] raid6: int64x1 xor() 575 MB/s
  184. [ 2.357642] raid6: using algorithm neonx4 gen() 2419 MB/s
  185. [ 2.361596] raid6: .... xor() 1729 MB/s, rmw enabled
  186. [ 2.366527] raid6: using neon recovery algorithm
  187. [ 2.371565] iommu: Default domain type: Translated
  188. [ 2.375961] iommu: DMA domain TLB invalidation policy: strict mode
  189. [ 2.382380] SCSI subsystem initialized
  190. [ 2.386029] usbcore: registered new interface driver usbfs
  191. [ 2.391381] usbcore: registered new interface driver hub
  192. [ 2.396649] usbcore: registered new device driver usb
  193. [ 2.401692] mc: Linux media interface: v0.10
  194. [ 2.405902] videodev: Linux video capture interface: v2.00
  195. [ 2.411365] pps_core: LinuxPPS API ver. 1 registered
  196. [ 2.416266] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
  197. [ 2.425356] PTP clock support registered
  198. [ 2.429256] EDAC MC: Ver: 3.0.0
  199. [ 2.432611] zynqmp-ipi-mbox mailbox@ff990400: Registered ZynqMP IPI mbox with TX/RX channels.
  200. [ 2.441018] zynqmp-ipi-mbox mailbox@ff990600: Registered ZynqMP IPI mbox with TX/RX channels.
  201. [ 2.449418] FPGA manager framework
  202. [ 2.452767] Advanced Linux Sound Architecture Driver Initialized.
  203. [ 2.459044] Bluetooth: Core ver 2.22
  204. [ 2.462294] NET: Registered PF_BLUETOOTH protocol family
  205. [ 2.467561] Bluetooth: HCI device and connection manager initialized
  206. [ 2.473878] Bluetooth: HCI socket layer initialized
  207. [ 2.478722] Bluetooth: L2CAP socket layer initialized
  208. [ 2.483742] Bluetooth: SCO socket layer initialized
  209. [ 2.488894] clocksource: Switched to clocksource arch_sys_counter
  210. [ 2.494746] VFS: Disk quotas dquot_6.6.0
  211. [ 2.498566] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  212. [ 2.509390] NET: Registered PF_INET protocol family
  213. [ 2.510321] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
  214. [ 2.518981] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
  215. [ 2.526073] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
  216. [ 2.534091] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
  217. [ 2.541526] TCP: Hash tables configured (established 32768 bind 32768)
  218. [ 2.547727] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
  219. [ 2.554386] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
  220. [ 2.561537] NET: Registered PF_UNIX/PF_LOCAL protocol family
  221. [ 2.567330] RPC: Registered named UNIX socket transport module.
  222. [ 2.572929] RPC: Registered udp transport module.
  223. [ 2.577593] RPC: Registered tcp transport module.
  224. [ 2.582260] RPC: Registered tcp NFSv4.1 backchannel transport module.
  225. [ 2.589216] PCI: CLS 0 bytes, default 64
  226. [ 2.592690] Trying to unpack rootfs image as initramfs...
  227. [ 2.598595] armv8-pmu pmu: hw perfevents: no interrupt-affinity property, guessing.
  228. [ 2.605967] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
  229. [ 3.589919] Freeing initrd memory: 22668K
  230. [ 3.620650] Initialise system trusted keyrings
  231. [ 3.620773] workingset: timestamp_bits=46 max_order=20 bucket_order=0
  232. [ 3.626569] NFS: Registering the id_resolver key type
  233. [ 3.630899] Key type id_resolver registered
  234. [ 3.635062] Key type id_legacy registered
  235. [ 3.639032] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  236. [ 3.645677] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
  237. [ 3.653040] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
  238. [ 3.693541] NET: Registered PF_ALG protocol family
  239. [ 3.693588] xor: measuring software checksum speed
  240. [ 3.701199] 8regs : 2626 MB/sec
  241. [ 3.704936] 32regs : 3110 MB/sec
  242. [ 3.709936] arm64_neon : 2563 MB/sec
  243. [ 3.710417] xor: using function: 32regs (3110 MB/sec)
  244. [ 3.715443] Key type asymmetric registered
  245. [ 3.719505] Asymmetric key parser 'x509' registered
  246. [ 3.724382] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
  247. [ 3.731707] io scheduler mq-deadline registered
  248. [ 3.736200] io scheduler kyber registered
  249. [ 3.765330] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
  250. [ 3.767037] Serial: AMBA driver
  251. [ 3.769909] cacheinfo: Unable to detect cache hierarchy for CPU 0
  252. [ 3.779185] brd: module loaded
  253. [ 3.782405] loop: module loaded
  254. [ 3.783237] mtdoops: mtd device (mtddev=name/number) must be supplied
  255. [ 3.790341] tun: Universal TUN/TAP device driver, 1.6
  256. [ 3.792846] CAN device driver interface
  257. [ 3.797137] SPI driver wl1271_spi has no spi_device_id for ti,wl1271
  258. [ 3.802901] SPI driver wl1271_spi has no spi_device_id for ti,wl1273
  259. [ 3.809218] SPI driver wl1271_spi has no spi_device_id for ti,wl1281
  260. [ 3.815529] SPI driver wl1271_spi has no spi_device_id for ti,wl1283
  261. [ 3.821843] SPI driver wl1271_spi has no spi_device_id for ti,wl1285
  262. [ 3.828157] SPI driver wl1271_spi has no spi_device_id for ti,wl1801
  263. [ 3.834472] SPI driver wl1271_spi has no spi_device_id for ti,wl1805
  264. [ 3.840786] SPI driver wl1271_spi has no spi_device_id for ti,wl1807
  265. [ 3.847101] SPI driver wl1271_spi has no spi_device_id for ti,wl1831
  266. [ 3.853420] SPI driver wl1271_spi has no spi_device_id for ti,wl1835
  267. [ 3.859731] SPI driver wl1271_spi has no spi_device_id for ti,wl1837
  268. [ 3.866124] usbcore: registered new interface driver asix
  269. [ 3.871443] usbcore: registered new interface driver ax88179_178a
  270. [ 3.877481] usbcore: registered new interface driver cdc_ether
  271. [ 3.883278] usbcore: registered new interface driver net1080
  272. [ 3.888902] usbcore: registered new interface driver cdc_subset
  273. [ 3.894780] usbcore: registered new interface driver zaurus
  274. [ 3.900330] usbcore: registered new interface driver cdc_ncm
  275. [ 3.906560] usbcore: registered new interface driver uas
  276. [ 3.911228] usbcore: registered new interface driver usb-storage
  277. [ 3.917764] rtc_zynqmp ffa60000.rtc: registered as rtc0
  278. [ 3.922371] rtc_zynqmp ffa60000.rtc: setting system clock to 1970-01-01T00:00:07 UTC (7)
  279. [ 3.930449] i2c_dev: i2c /dev entries driver
  280. [ 3.936087] usbcore: registered new interface driver uvcvideo
  281. [ 3.941072] Bluetooth: HCI UART driver ver 2.3
  282. [ 3.944758] Bluetooth: HCI UART protocol H4 registered
  283. [ 3.949869] Bluetooth: HCI UART protocol BCSP registered
  284. [ 3.955156] Bluetooth: HCI UART protocol LL registered
  285. [ 3.960246] Bluetooth: HCI UART protocol ATH3K registered
  286. [ 3.965626] Bluetooth: HCI UART protocol Three-wire (H5) registered
  287. [ 3.971869] Bluetooth: HCI UART protocol Intel registered
  288. [ 3.977217] Bluetooth: HCI UART protocol QCA registered
  289. [ 3.982414] usbcore: registered new interface driver bcm203x
  290. [ 3.988034] usbcore: registered new interface driver bpa10x
  291. [ 3.993570] usbcore: registered new interface driver bfusb
  292. [ 3.999021] usbcore: registered new interface driver btusb
  293. [ 4.004479] usbcore: registered new interface driver ath3k
  294. [ 4.009975] EDAC MC: ECC not enabled
  295. [ 4.013579] EDAC DEVICE0: Giving out device to module edac controller cache_err: DEV edac (POLLED)
  296. [ 4.022498] EDAC DEVICE1: Giving out device to module zynqmp-ocm-edac controller zynqmp_ocm: DEV ff960000.memory-controller (INTERRUPT)
  297. [ 4.034807] sdhci: Secure Digital Host Controller Interface driver
  298. [ 4.040611] sdhci: Copyright(c) Pierre Ossman
  299. [ 4.044930] sdhci-pltfm: SDHCI platform and OF driver helper
  300. [ 4.050872] ledtrig-cpu: registered to indicate activity on CPUs
  301. [ 4.056619] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping ....
  302. [ 4.062987] zynqmp_firmware_probe Platform Management API v1.1
  303. [ 4.068721] zynqmp_firmware_probe Trustzone version v1.0
  304. [ 4.101793] securefw securefw: securefw probed
  305. [ 4.102060] alg: No test for xilinx-zynqmp-aes (zynqmp-aes)
  306. [ 4.106251] zynqmp_aes firmware:zynqmp-firmware:zynqmp-aes: AES Successfully Registered
  307. [ 4.114347] alg: No test for xilinx-keccak-384 (zynqmp-keccak-384)
  308. [ 4.120489] alg: No test for xilinx-zynqmp-rsa (zynqmp-rsa)
  309. [ 4.126006] usbcore: registered new interface driver usbhid
  310. [ 4.131403] usbhid: USB HID core driver
  311. [ 4.137974] ARM CCI_400_r1 PMU driver probed
  312. [ 4.138559] fpga_manager fpga0: Xilinx ZynqMP FPGA Manager registered
  313. [ 4.146213] usbcore: registered new interface driver snd-usb-audio
  314. [ 4.152704] pktgen: Packet Generator for packet performance testing. Version: 2.75
  315. [ 4.160218] Initializing XFRM netlink socket
  316. [ 4.163815] NET: Registered PF_INET6 protocol family
  317. [ 4.169105] Segment Routing with IPv6
  318. [ 4.172318] In-situ OAM (IOAM) with IPv6
  319. [ 4.176280] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
  320. [ 4.182395] NET: Registered PF_PACKET protocol family
  321. [ 4.187114] NET: Registered PF_KEY protocol family
  322. [ 4.191874] can: controller area network core
  323. [ 4.196211] NET: Registered PF_CAN protocol family
  324. [ 4.200945] can: raw protocol
  325. [ 4.203881] can: broadcast manager protocol
  326. [ 4.208041] can: netlink gateway - max_hops=1
  327. [ 4.212434] Bluetooth: RFCOMM TTY layer initialized
  328. [ 4.217214] Bluetooth: RFCOMM socket layer initialized
  329. [ 4.222319] Bluetooth: RFCOMM ver 1.11
  330. [ 4.226036] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  331. [ 4.231305] Bluetooth: BNEP filters: protocol multicast
  332. [ 4.236500] Bluetooth: BNEP socket layer initialized
  333. [ 4.241425] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  334. [ 4.247309] Bluetooth: HIDP socket layer initialized
  335. [ 4.252262] 8021q: 802.1Q VLAN Support v1.8
  336. [ 4.256487] 9pnet: Installing 9P2000 support
  337. [ 4.260644] Key type dns_resolver registered
  338. [ 4.264998] registered taskstats version 1
  339. [ 4.268935] Loading compiled-in X.509 certificates
  340. [ 4.274717] Btrfs loaded, crc32c=crc32c-generic, zoned=no, fsverity=no
  341. [ 4.288732] ff010000.serial: ttyPS1 at MMIO 0xff010000 (irq = 48, base_baud = 6249999) is a xuartps
  342. [ 4.297761] printk: console [ttyPS1] enabled
  343. [ 4.297761] printk: console [ttyPS1] enabled
  344. [ 4.302063] printk: bootconsole [cdns0] disabled
  345. [ 4.302063] printk: bootconsole [cdns0] disabled
  346. [ 4.311323] of-fpga-region fpga-full: FPGA Region probed
  347. [ 4.321480] xilinx-zynqmp-dma fd500000.dma-controller: ZynqMP DMA driver Probe success
  348. [ 4.329551] xilinx-zynqmp-dma fd510000.dma-controller: ZynqMP DMA driver Probe success
  349. [ 4.337623] xilinx-zynqmp-dma fd520000.dma-controller: ZynqMP DMA driver Probe success
  350. [ 4.345688] xilinx-zynqmp-dma fd530000.dma-controller: ZynqMP DMA driver Probe success
  351. [ 4.353756] xilinx-zynqmp-dma fd540000.dma-controller: ZynqMP DMA driver Probe success
  352. [ 4.361813] xilinx-zynqmp-dma fd550000.dma-controller: ZynqMP DMA driver Probe success
  353. [ 4.369893] xilinx-zynqmp-dma fd560000.dma-controller: ZynqMP DMA driver Probe success
  354. [ 4.377957] xilinx-zynqmp-dma fd570000.dma-controller: ZynqMP DMA driver Probe success
  355. [ 4.386095] xilinx-zynqmp-dma ffa80000.dma-controller: ZynqMP DMA driver Probe success
  356. [ 4.394160] xilinx-zynqmp-dma ffa90000.dma-controller: ZynqMP DMA driver Probe success
  357. [ 4.402225] xilinx-zynqmp-dma ffaa0000.dma-controller: ZynqMP DMA driver Probe success
  358. [ 4.410285] xilinx-zynqmp-dma ffab0000.dma-controller: ZynqMP DMA driver Probe success
  359. [ 4.418353] xilinx-zynqmp-dma ffac0000.dma-controller: ZynqMP DMA driver Probe success
  360. [ 4.426432] xilinx-zynqmp-dma ffad0000.dma-controller: ZynqMP DMA driver Probe success
  361. [ 4.434495] xilinx-zynqmp-dma ffae0000.dma-controller: ZynqMP DMA driver Probe success
  362. [ 4.442556] xilinx-zynqmp-dma ffaf0000.dma-controller: ZynqMP DMA driver Probe success
  363. [ 4.450931] xilinx-zynqmp-dpdma fd4c0000.dma-controller: Xilinx DPDMA engine is probed
  364. [ 4.462057] zynqmp-display fd4a0000.display: vtc bridge property not present
  365. [ 4.471930] xilinx-dp-snd-codec fd4a0000.display:zynqmp_dp_snd_codec0: Xilinx DisplayPort Sound Codec probed
  366. [ 4.481972] xilinx-dp-snd-pcm zynqmp_dp_snd_pcm0: Xilinx DisplayPort Sound PCM probed
  367. [ 4.490003] xilinx-dp-snd-pcm zynqmp_dp_snd_pcm1: Xilinx DisplayPort Sound PCM probed
  368. [ 4.498831] xilinx-dp-snd-card fd4a0000.display:zynqmp_dp_snd_card: Xilinx DisplayPort Sound Card probed
  369. [ 4.503019] zynqmp_pll_disable() clock disable failed for dpll_int, ret = -13
  370. [ 4.508399] OF: graph: no port node found in /axi/display@fd4a0000
  371. [ 4.521924] xlnx-drm xlnx-drm.0: bound fd4a0000.display (ops 0xffff800008f031e0)
  372. [ 4.743150] Console: switching to colour frame buffer device 128x48
  373. [ 4.766068] zynqmp-display fd4a0000.display: [drm] fb0: xlnxdrmfb frame buffer device
  374. [ 4.774090] [drm] Initialized xlnx 1.0.0 20130509 for fd4a0000.display on minor 0
  375. [ 4.781588] zynqmp-display fd4a0000.display: ZynqMP DisplayPort Subsystem driver probed
  376. [ 4.791659] spi-nor spi0.0: mt25qu512a (65536 Kbytes)
  377. [ 4.796771] 16 fixed-partitions partitions found on MTD device spi0.0
  378. [ 4.798356] tpm_tis_spi spi2.0: 2.0 TPM (device-id 0x1B, rev-id 22)
  379. [ 4.803212] Creating 16 MTD partitions on "spi0.0":
  380. [ 4.811877] tpm tpm0: A TPM error (256) occurred attempting the self test
  381. [ 4.814339] 0x000000000000-0x000000080000 : "Image Selector"
  382. [ 4.821115] tpm tpm0: starting up the TPM manually
  383. [ 4.827560] 0x000000080000-0x000000100000 : "Image Selector Golden"
  384. [ 4.832268] random: fast init done
  385. [ 4.838459] 0x000000100000-0x000000120000 : "Persistent Register"
  386. [ 4.847940] 0x000000120000-0x000000140000 : "Persistent Register Backup"
  387. [ 4.855280] 0x000000140000-0x000000200000 : "Open_1"
  388. [ 4.860902] 0x000000200000-0x000000f00000 : "Image A (FSBL, PMU, ATF, U-Boot)"
  389. [ 4.868774] 0x000000f00000-0x000000f80000 : "ImgSel Image A Catch"
  390. [ 4.875603] 0x000000f80000-0x000001c80000 : "Image B (FSBL, PMU, ATF, U-Boot)"
  391. [ 4.883458] 0x000001c80000-0x000001d00000 : "ImgSel Image B Catch"
  392. [ 4.890282] 0x000001d00000-0x000001e00000 : "Open_2"
  393. [ 4.895902] 0x000001e00000-0x000002000000 : "Recovery Image"
  394. [ 4.902213] 0x000002000000-0x000002200000 : "Recovery Image Backup"
  395. [ 4.909129] 0x000002200000-0x000002220000 : "U-Boot storage variables"
  396. [ 4.916303] 0x000002220000-0x000002240000 : "U-Boot storage variables backup"
  397. [ 4.924190] 0x000002240000-0x000002250000 : "SHA256"
  398. [ 4.929797] 0x000002250000-0x000004000000 : "User"
  399. [ 4.937007] macb ff0e0000.ethernet: Not enabling partial store and forward
  400. [ 4.947433] macb ff0e0000.ethernet eth0: Cadence GEM rev 0x50070106 at 0xff0e0000 irq 38 (00:0a:35:0d:d0:da)
  401. [ 4.957713] xilinx-axipmon ffa00000.perf-monitor: Probed Xilinx APM
  402. [ 4.964251] xilinx-axipmon fd0b0000.perf-monitor: Probed Xilinx APM
  403. [ 4.970715] xilinx-axipmon fd490000.perf-monitor: Probed Xilinx APM
  404. [ 4.977179] xilinx-axipmon ffa10000.perf-monitor: Probed Xilinx APM
  405. [ 5.006469] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
  406. [ 5.011959] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 1
  407. [ 5.019707] xhci-hcd xhci-hcd.1.auto: hcc params 0x0238f625 hci version 0x100 quirks 0x0000000002010810
  408. [ 5.029111] xhci-hcd xhci-hcd.1.auto: irq 55, io mem 0xfe200000
  409. [ 5.035221] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15
  410. [ 5.043482] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  411. [ 5.050694] usb usb1: Product: xHCI Host Controller
  412. [ 5.055563] usb usb1: Manufacturer: Linux 5.15.19-xilinx-v2022.1 xhci-hcd
  413. [ 5.062342] usb usb1: SerialNumber: xhci-hcd.1.auto
  414. [ 5.067474] hub 1-0:1.0: USB hub found
  415. [ 5.071237] hub 1-0:1.0: 1 port detected
  416. [ 5.075333] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
  417. [ 5.080820] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 2
  418. [ 5.088478] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
  419. [ 5.095222] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.15
  420. [ 5.103485] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  421. [ 5.110701] usb usb2: Product: xHCI Host Controller
  422. [ 5.115570] usb usb2: Manufacturer: Linux 5.15.19-xilinx-v2022.1 xhci-hcd
  423. [ 5.122352] usb usb2: SerialNumber: xhci-hcd.1.auto
  424. [ 5.127459] hub 2-0:1.0: USB hub found
  425. [ 5.131227] hub 2-0:1.0: 1 port detected
  426. [ 5.136941] at24 1-0050: supply vcc not found, using dummy regulator
  427. [ 5.143582] at24 1-0050: 8192 byte 24c64 EEPROM, writable, 1 bytes/write
  428. [ 5.150410] at24 1-0051: supply vcc not found, using dummy regulator
  429. [ 5.157040] at24 1-0051: 8192 byte 24c64 EEPROM, writable, 1 bytes/write
  430. [ 5.163927] cdns-i2c ff030000.i2c: 400 kHz mmio ff030000 irq 40
  431. [ 5.171209] cdns-wdt fd4d0000.watchdog: Xilinx Watchdog Timer with timeout 60s
  432. [ 5.178628] cdns-wdt ff150000.watchdog: Xilinx Watchdog Timer with timeout 10s
  433. [ 5.188812] clk: couldn't set sdio1_ref clk rate to 187498123 (-16), current rate: 199999998
  434. [ 5.192958] gpio-keys gpio-keys: Button without keycode
  435. [ 5.197632] clk: couldn't set sdio1_ref clk rate to 187498123 (-16), current rate: 199999998
  436. [ 5.202471] gpio-keys: probe of gpio-keys failed with error -22
  437. [ 5.216919] of_cfs_init
  438. [ 5.219380] of_cfs_init: OK
  439. [ 5.222312] cfg80211: Loading compiled-in X.509 certificates for regulatory database
  440. [ 5.244163] mmc1: SDHCI controller on ff170000.mmc [ff170000.mmc] using ADMA 64-bit
  441. [ 5.349250] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
  442. [ 5.355788] clk: Not disabling unused clocks
  443. [ 5.356902] usb 1-1: new high-speed USB device number 2 using xhci-hcd
  444. [ 5.360310] ALSA device list:
  445. [ 5.369534] #0: DisplayPort monitor
  446. [ 5.373516] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
  447. [ 5.382132] cfg80211: failed to load regulatory.db
  448. [ 5.425032] Freeing unused kernel memory: 2176K
  449. [ 5.429620] Run /init as init process
  450. [ 5.488239] random: python3: uninitialized urandom read (24 bytes read)
  451. [ 5.525405] usb 1-1: New USB device found, idVendor=0424, idProduct=2744, bcdDevice= 2.21
  452. [ 5.533619] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  453. [ 5.540762] usb 1-1: Product: USB2744
  454. [ 5.544442] usb 1-1: Manufacturer: Microchip Tech
  455. [ 5.607242] hub 1-1:1.0: USB hub found
  456. [ 5.611067] hub 1-1:1.0: 5 ports detected
  457. [ 5.671068] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd
  458. [ 5.697308] usb 2-1: New USB device found, idVendor=0424, idProduct=5744, bcdDevice= 2.21
  459. [ 5.705507] usb 2-1: New USB device strings: Mfr=2, Product=3, SerialNumber=0
  460. [ 5.712668] usb 2-1: Product: USB5744
  461. [ 5.716352] usb 2-1: Manufacturer: Microchip Tech
  462. [ 5.783214] hub 2-1:1.0: USB hub found
  463. [ 5.787107] hub 2-1:1.0: 4 ports detected
  464. [ 5.956913] usb 1-1.5: new high-speed USB device number 3 using xhci-hcd
  465. [ 6.061626] usb 1-1.5: New USB device found, idVendor=0424, idProduct=2740, bcdDevice= 2.00
  466. [ 6.069974] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  467. [ 6.077279] usb 1-1.5: Product: Hub Controller
  468. [ 6.081712] usb 1-1.5: Manufacturer: Microchip Tech
  469. [ 6.138523] macb ff0e0000.ethernet eth0: PHY [ff0e0000.ethernet-ffffffff:01] driver [TI DP83867] (irq=POLL)
  470. [ 6.148281] macb ff0e0000.ethernet eth0: configuring for phy/rgmii-id link mode
  471. [ 6.156151] pps pps0: new PPS source ptp0
  472. [ 6.160235] macb ff0e0000.ethernet: gem-ptp-timer ptp clock registered.
  473. MAC address for eth0 is updated to 00:0a:35:0d:d0:da
  474. udhcpc: started, v1.34.1
  475. udhcpc: broadcasting discover
  476. [ 6.516133] mmc1: new high speed SDHC card at address b368
  477. [ 6.522049] mmcblk1: mmc1:b368 LX32G 29.5 GiB
  478. [ 6.528050] mmcblk1: p1 p2
  479. udhcpc: broadcasting discover
  480. [ 11.257157] TI DP83867 ff0e0000.ethernet-ffffffff:01: Downshift occurred from negotiated speed 1Gbps to actual speed 100Mbps, check cabling!
  481. [ 11.271196] macb ff0e0000.ethernet eth0: Link is Up - 100Mbps/Full - flow control tx
  482. [ 11.278951] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  483. udhcpc: broadcasting discover
  484. udhcpc: broadcasting select for 192.168.201.9, server 192.168.201.1
  485. udhcpc: lease of 192.168.201.9 obtained from 192.168.201.1, lease time 86400
  486. /etc/udhcpc.d/50default: Adding DNS 192.168.201.1
  487. ERROR: There's no '/dev' on rootfs.
  488.  
  489. sh: can't access tty; job control turned off
  490. / #
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!