API tools faq
paste
holot989

last_kmsg.txt

holot989
Aug 21st, 2012
87
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 95.22 KB | None | 0 0
raw download clone embed print report
  1. [ 0.000000] [0: swapper: 0] Booting Linux on physical CPU 0
  2. [ 0.000000] [0: swapper: 0] Initializing cgroup subsys cpu
  3. [ 0.000000] [0: swapper: 0] Linux version 3.0.40-perf-gc11a151 (mikeyman77@ubuntu) (gcc version 4.4.3 (GCC) ) #1 SMP PREEMPT Sun Aug 19 17:03:47 PDT 2012
  4. [ 0.000000] [0: swapper: 0] CPU: ARMv7 Processor [510f02d2] revision 2 (ARMv7), cr=10c5387d
  5. [ 0.000000] [0: swapper: 0] CPU: VIPT nonaliasing data cache, VIVT ASID tagged instruction cache
  6. [ 0.000000] [0: swapper: 0] Machine: cm_hercules
  7. [ 0.000000] [0: swapper: 0] memory pool 0 (start 38000000 size 700000) initialized
  8. [ 0.000000] [0: swapper: 0] memory pool 1 (start 38700000 size 3802000) initialized
  9. [ 0.000000] [0: swapper: 0] memory pool 3 (start 77900000 size 8700000) initialized
  10. [ 0.000000] [0: swapper: 0] Memory policy: ECC disabled, Data cache writealloc
  11. [ 0.000000] [0: swapper: 0] socinfo_init: v6, id=86, ver=2.0, raw_id=1697, raw_ver=1697, hw_plat=0, hw_plat_ver=65536
  12. [ 0.000000] [0: swapper: 0] accessory_chip=0 hw_plat_subtype=0
  13. [ 0.000000] [0: swapper: 0] sec_getlog_supply_meminfo: 40000000 40000000 0 0
  14. [ 0.000000] [0: swapper: 0] allocating 8757248 bytes at c1c4f000 (4204f000 physical) for fb
  15. [ 0.000000] [0: swapper: 0] PERCPU: Embedded 8 pages/cpu @c24ac000 s9344 r8192 d15232 u32768
  16. [ 0.000000] [0: swapper: 0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 203528
  17. [ 0.000000] [0: swapper: 0] Kernel command line: androidboot.hardware=qcom usb_id_pin_rework=true sec_log=0x80000@0x40184008 sec_dbg=0x100000@0x4020400c sec_debug.reset_reason=0x1a2b3c00 console=null sec_debug.enable=0 sec_debug.enable_user=0 vmalloc=432m hw_rev=14 androidboot.emmc=true androidboot.serialno=26ca6293 androidboot.baseband=csfb
  18. [ 0.000000] [0: swapper: 0] (sec_dbg_setup)
  19. [ 0.000000] [0: swapper: 0] (sec_dbg_setup) sec_dbg_buf_base = 0x4020400c
  20. [ 0.000000] [0: swapper: 0] (sec_dbg_setup) sec_dbg_buf_size = 0x100000
  21. [ 0.000000] hw_rev_setup : HW rev value is intialized first
  22. [ 0.000000] HW rev value : 0xE
  23. [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
  24. [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  25. [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  26. [ 0.000000] Memory: 43MB 760MB = 803MB total
  27. [ 0.000000] Memory: 784836k/784836k available, 176700k reserved, 520192K highmem
  28. [ 0.000000] Virtual kernel memory layout:
  29. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  30. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  31. [ 0.000000] DMA : 0xff000000 - 0xffe00000 ( 14 MB)
  32. [ 0.000000] vmalloc : 0xd8000000 - 0xfd000000 ( 592 MB)
  33. [ 0.000000] lowmem : 0xc0000000 - 0xd7800000 ( 376 MB)
  34. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  35. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  36. [ 0.000000] .init : 0xc0008000 - 0xc0100000 ( 992 kB)
  37. [ 0.000000] .text : 0xc0100000 - 0xc0b791c8 (10725 kB)
  38. [ 0.000000] .data : 0xc0c00000 - 0xc0cff750 (1022 kB)
  39. [ 0.000000] .bss : 0xc0cff774 - 0xc132b0cc (6319 kB)
  40. [ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
  41. [ 0.000000] Preemptible hierarchical RCU implementation.
  42. [ 0.000000] NR_IRQS:855
  43. [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
  44. [ 0.000000] Console: colour dummy device 80x30
  45. [ 0.150177] Calibrating delay using timer specific routine.. 13.53 BogoMIPS (lpj=67654)
  46. [ 0.150207] pid_max: default: 32768 minimum: 301
  47. [ 0.150726] Mount-cache hash table entries: 512
  48. [ 0.151977] Initializing cgroup subsys cpuacct
  49. [ 0.152099] Initializing cgroup subsys freezer
  50. [ 0.152160] CPU: Testing write buffer coherency: ok
  51. [ 0.152496] hw perfevents: enabled with ARMv7 Scorpion-MP PMU driver, 5 counters available
  52. [ 0.184814] CPU1: Booted secondary processor
  53. [ 0.194519] Brought up 2 CPUs
  54. [ 0.194549] SMP: Total of 2 processors activated (27.06 BogoMIPS).
  55. [ 0.206787] print_constraints: dummy:
  56. [ 0.206848] rdev_init_debugfs: Error-Bad Function Input
  57. [ 0.207153] NET: Registered protocol family 16
  58. [ 0.207336] AXI: msm_bus_fabric_init_driver(): msm_bus_fabric_init_driver
  59. [ 0.208831] (sec_get_lpm_mode) 1a2b3c00
  60. [ 0.208862] (sec_get_lpm_mode) 0
  61. [ 0.208862] (sec_debug_init)
  62. [ 0.208892] (sec_debug_init) reset_reason : 0x1a2b3c00
  63. [ 0.208892] msm_rpm_init: RPM firmware 2.0.1883
  64. [ 0.209533] saw_probe: id=0, name=8901_s0
  65. [ 0.209838] saw_probe: id=1, name=8901_s1
  66. [ 0.211151] rcg_clk_handoff: gsbi12_uart_clk rate=3686400
  67. [ 0.211181] rcg_clk_handoff: gsbi12_qup_clk rate=24000000
  68. [ 0.211212] rcg_clk_handoff: sdc1_clk rate=48000000
  69. [ 0.211273] rcg_clk_handoff: dsi_byte_clk rate=1
  70. [ 0.211334] rcg_clk_handoff: mdp_clk rate=200000000
  71. [ 0.211425] rcg_clk_handoff: pixel_mdp_clk rate=27400000
  72. [ 0.212951] ACPU PVS: Slow
  73. [ 0.212982] Max ACPU freq: 1512000 KHz
  74. [ 0.218353] CPU0: 23 scaling frequencies supported.
  75. [ 0.218353] CPU1: 23 scaling frequencies supported.
  76. [ 0.218811] LTE_switch_init!
  77. [ 0.218841] LTE_switch_init end!
  78. [ 0.219970] pm8058_probe: PMIC revision: E3
  79. [ 0.220947] pm_gpio_probe: OK: base=173, ngpio=40
  80. [ 0.221099] pm8xxx_mpp_probe: OK: base=213, ngpio=12
  81. [ 0.222167] pm8901_probe: PMIC revision reg: F4
  82. [ 0.222167] pm8901_probe: PMIC version: PM8901 rev 2.1
  83. [ 0.222503] pm8xxx_mpp_probe: OK: base=225, ngpio=4
  84. [ 0.233825] MSM Watchdog Initialized
  85. [ 0.234405] ram_console: got buffer at 77800000, size 100000
  86. [ 0.234497] ram_console: found existing buffer, size 139951, start 139951
  87. [ 0.663970] console [ram-1] enabled
  88. [ 0.665161] pm8058_gpios_init PMIC_GPIO_EAR_DET : OK
  89. [ 0.665832] msm_snddev_init
  90. [ 0.666259] msm_snddev_init snd_devices_celox - config
  91. [ 0.675567] [TKEY] tkey_device_init: 8901_lvs2 On
  92. [ 0.676239] [TKEY] tkey_device_init: TKEY_L12 3.3 V Set
  93. [ 0.676300] brcm_wlan_init: start
  94. [ 0.676483] brcm_init_wlan_mem: WIFI MEM Allocated
  95. [ 0.676727] [TSP] Power Down S to discharge for unexpected leackage current
  96. [ 0.692260] bio: create slab <bio-0> at 0
  97. [ 0.693511] ION heap vmalloc created
  98. [ 0.693634] ION heap mm created at 38900000 with size 3600000
  99. [ 0.693786] ION heap mm_fw created at 38700000 with size 200000
  100. [ 0.693878] ION heap mfc created at 3bf00000 with size 2000
  101. [ 0.694091] ION heap sf created at 77900000 with size 4000000
  102. [ 0.694213] ION heap camera_preview created at 7b900000 with size 2900000
  103. [ 0.694396] ION heap wb created at 7e200000 with size 1500000
  104. [ 0.694488] ION heap qsecom created at 7f700000 with size 600000
  105. [ 0.694793] pmic8058_pwm_probe: OK
  106. [ 0.695434] SCSI subsystem initialized
  107. [ 0.695739] usbcore: registered new interface driver usbfs
  108. [ 0.695861] usbcore: registered new interface driver hub
  109. [ 0.696105] usbcore: registered new device driver usb
  110. [ 0.696594] i2c-gpio i2c-gpio.15: using pins 107 (SDA) and 101 (SCL)
  111. [ 0.696807] i2c-gpio i2c-gpio.10: using pins 138 (SDA) and 139 (SCL)
  112. [ 0.697021] i2c-gpio i2c-gpio.13: using pins 156 (SDA) and 157 (SCL)
  113. [ 0.697296] i2c-gpio i2c-gpio.11: using pins 38 (SDA) and 39 (SCL)
  114. [ 0.697540] i2c-gpio i2c-gpio.12: using pins 51 (SDA) and 52 (SCL)
  115. [ 0.697814] i2c-gpio i2c-gpio.17: using pins 70 (SDA) and 94 (SCL)
  116. [ 0.698028] i2c-gpio i2c-gpio.9: using pins 155 (SDA) and 154 (SCL)
  117. [ 0.698455] Advanced Linux Sound Architecture Driver Version 1.0.24.
  118. [ 0.698913] Bluetooth: Core ver 2.16
  119. [ 0.699096] NET: Registered protocol family 31
  120. [ 0.699188] Bluetooth: HCI device and connection manager initialized
  121. [ 0.699340] Bluetooth: HCI socket layer initialized
  122. [ 0.699432] Bluetooth: L2CAP socket layer initialized
  123. [ 0.699584] Bluetooth: SCO socket layer initialized
  124. [ 0.700164] cfg80211: Calling CRDA to update world regulatory domain
  125. [ 0.700469] Switching to clocksource gp_timer
  126. [ 0.713073] NET: Registered protocol family 2
  127. [ 0.713287] IP route cache hash table entries: 16384 (order: 4, 65536 bytes)
  128. [ 0.713714] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
  129. [ 0.714447] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
  130. [ 0.715148] TCP: Hash tables configured (established 65536 bind 65536)
  131. [ 0.715301] TCP reno registered
  132. [ 0.715362] UDP hash table entries: 256 (order: 1, 8192 bytes)
  133. [ 0.715454] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
  134. [ 0.715942] NET: Registered protocol family 1
  135. [ 0.716339] RPC: Registered named UNIX socket transport module.
  136. [ 0.716491] RPC: Registered udp transport module.
  137. [ 0.716583] RPC: Registered tcp transport module.
  138. [ 0.716735] RPC: Registered tcp NFSv4.1 backchannel transport module.
  139. [ 0.716979] Trying to unpack rootfs image as initramfs...
  140. [ 0.731506] Freeing initrd memory: 324K
  141. [ 0.731872] PMU: registered new PMU device of type 0
  142. [ 0.732208] PMU: registered new PMU device of type 1
  143. [ 0.732666] pil_qdsp6v3 pil_qdsp6v3: using secure boot
  144. [ 0.733123] pil_modem pil_modem: using secure boot
  145. [ 0.733337] sdio_al:SDIO-AL SW version 1.30
  146. [ 0.735900] smd_channel_probe_worker: allocation table not initialized
  147. [ 0.741607] msm_dsps driver version 3.03.
  148. [ 0.746612] lpa_if_init: lpa_if_ptr 0xd729a500 buf_vir 0xffdf0000 buf_phy 0x56c00000 buf_zise 65536
  149. [ 0.747467] dspcrashd_probe: Platform driver values: Base = 0x46700000, Size = 0x2000000,pdata = 0xdeaddead
  150. [ 0.748809] sec_switch_probe enter sec_switch_probe
  151. [ 0.749572] charm_modem_probe: Registering charm modem
  152. [ 0.751983] msm_rpm_log_probe: OK
  153. [ 0.752410] [BT] bcm4330_bluetooth_init
  154. [ 0.752868] [BT] bcm4330_bluetooth_probe
  155. [ 0.753295] sec_getlog_supply_kloginfo: 0xc1124ccc
  156. [ 0.838104] highmem bounce pool size: 64 pages
  157. [ 0.838439] ashmem: initialized
  158. [ 0.844085] fuse init (API version 7.16)
  159. [ 0.844390] msgmni has been set to 517
  160. [ 0.845733] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
  161. [ 0.845825] io scheduler noop registered
  162. [ 0.845977] io scheduler deadline registered
  163. [ 0.846069] io scheduler cfq registered (default)
  164. [ 0.847320] mdp_bus_scale_update_request invalid bus handle
  165. [ 0.852691] ld9040 start lcdc_ld9040_panel_init
  166. [ 0.852844] ld9040 start ld9040_probe: pdev->name:lcdc_ld9040_wvga
  167. [ 0.852996] ld9040 msm_fb_add_device START
  168. [ 0.853057] setting pdata->panel_info.fb_num to 3. type: 0
  169. [ 0.853210] msm_fb_add_device: msm_fb_device_alloc failed!
  170. [ 0.853302] ld9040 msm_fb_add_device end
  171. [ 0.853698] ld9040 platform_driver_register(&this_driver) is done
  172. [ 0.853851] ld9040 LDI : EA8868, pixelclock 27400000
  173. [ 0.854217] setting pdata->panel_info.fb_num to 3. type: 3
  174. [ 0.854736] mdp4_lcdc_vsync_init: ndx=0
  175. [ 0.857147] pm_runtime: fail to wake up
  176. [ 0.887420] mdp4_lcdc_on: <ID=0 480x800 (40,2,40), (8,2,8) 27MHz>
  177. [ 0.889831] [kmj] lcdc_LD9040_panel_power:enable:1
  178. [ 0.890899] ld9040 lcdc_ld9040_panel_on + (0,0,0)
  179. [ 0.890899] ld9040 : lcdc_config_gpios [1]
  180. [ 0.890899] ld9040 start spi_init
  181. [ 0.890899] ld9040 clk : 103, cs : 104, sdi : 106
  182. [ 0.890899] ld9040 start ld9040_disp_powerup
  183. [ 0.950714] ld9040 start ld9040_disp_on - HW Rev: 14
  184. [ 1.081420] ld9040 ld9040_read_lcd_id: a1 3 22
  185. [ 1.081451] ld9040 lcd EA8868 M3
  186. [ 1.084289] ld9040 ACL_cutoff_set Percentage : 40!!
  187. [ 1.085601] ld9040 ea8868_gamma_ctl 10 10
  188. [ 1.085693] ld9040 lcdc_ld9040_panel_on - (1,1,1)
  189. [ 1.106903] Console: switching to colour frame buffer device 60x50
  190. [ 1.123809] FrameBuffer[0] 480x800 size=4608000 bytes is registered successfully!
  191. [ 1.123962] is_lpcharging_state: is_lpm_boot:0
  192. [ 1.124114] load_565rle_image: Can not open /initlogo.rle
  193. [ 1.124542] Registered led device: lcd-backlight
  194. [ 1.124694] sec_getlog_supply_fbinfo: 0x41c4f000 480 800 32 2
  195. [ 1.124847] ld9040 platform_device_register(&this_device) is done
  196. [ 1.125457] hdmi_msm hdmi_msm.0: probe
  197. [ 1.126159] hdmi_msm hdmi_msm.1: probe
  198. [ 1.126281] hdmi_msm hdmi_msm.1: Features <val:0x80004481, HDMI:ON, HDCP:ON>
  199. [ 1.126647] setting pdata->panel_info.fb_num to 1. type: 7
  200. [ 1.127105] mdp4_dtv_vsync_init: ndx=0
  201. [ 1.129394] FrameBuffer[1] 1920x1080 size=4149248 bytes is registered successfully!
  202. [ 1.129821] hdmi_msm hdmi_msm.1: external_common_state_create: sysfs group d68dba08
  203. [ 1.130004] EXT_COMMON: external_common_state_create: kobject_uevent(KOBJ_ADD)
  204. [ 1.130096] hdmi_msm hdmi_msm.1: HDMI HPD: ON
  205. [ 1.130249] hdmi_msm hdmi_msm.1: HDMI Clk: Enable
  206. [ 1.130401] hdmi_core_power(on): success
  207. [ 1.130584] hdmi_enable_5v(on): success
  208. [ 1.130676] hdmi_msm hdmi_msm.1: HDMI Core: Disable
  209. [ 1.130767] hdmi_msm hdmi_msm.1: HDMI[0x0308] => [000000ff]
  210. [ 1.130981] hdmi_enable_5v(off): success
  211. [ 1.131072] hdmi_core_power(off): success
  212. [ 1.131164] hdmi_msm hdmi_msm.1: HDMI Clk: Disable
  213. [ 1.132354]
  214. [ 1.132354] msm_vidc_enc: Inside vid_enc_init()
  215. [ 1.132659]
  216. [ 1.132659] msm_vidc_enc: Inside vid_enc_vcd_init()
  217. [ 1.132995] is_lpcharging_state: is_lpm_boot:0
  218. [ 1.133209] mhl_v2, Board : get_mhl_int_irq, rev:14
  219. [ 1.133575] create mhl sysfile
  220. [ 1.134002] input: sii9234_rcp as /devices/virtual/input/input0
  221. [ 1.205657] msm_serial_hs.0: ttyHS0 at MMIO 0x16540000 (irq = 188) is a MSM HS UART
  222. [ 1.206420] msm_serial_hs module loaded
  223. [ 1.206665] msm_serial_hsl: detected port #1
  224. [ 1.206817] msm_serial_hsl.1: ttyHSL1 at MMIO 0x19940000 (irq = 221) is a MSM
  225. [ 1.207427] msm_serial_hsl: detected port #0
  226. [ 1.207611] msm_serial_hsl.0: ttyHSL0 at MMIO 0x19c40000 (irq = 227) is a MSM
  227. [ 1.208282] msm_serial_hsl: driver initialized
  228. [ 1.209533] msm_rotator_probe: rotator_hw_revision=1
  229. [ 1.209655] msm_rotator_probe: rotator_hw_revision=1
  230. [ 1.216064] kgsl kgsl-3d0: |kgsl_gpummu_init| MMU type set for device is GPUMMU
  231. [ 1.217681] kgsl kgsl-2d0: |kgsl_gpummu_init| MMU type set for device is GPUMMU
  232. [ 1.218841] kgsl kgsl-2d1: |kgsl_gpummu_init| MMU type set for device is GPUMMU
  233. [ 1.224151] brd: module loaded
  234. [ 1.226409] loop: module loaded
  235. [ 1.226531] lkdtm: No crash points registered, enable through debugfs
  236. [ 1.226898] pmem: Initializing pmem_audio (user-space) as non-cached
  237. [ 1.227416] allocating 2666496 bytes at (null) (7fd00000 physical) for pmem_audio
  238. [ 1.227722] is_lpcharging_state: is_lpm_boot:0
  239. [ 1.227966] ak8975 probe start!
  240. [ 1.229156] sensor_power_on_vdd: vdd_2p85=1, vdd_1p8=1, vdd_2p_4=0, vdd_2p85_mag=0
  241. [ 1.230255] ak8975 probe success!
  242. [ 1.230407] is_lpcharging_state: is_lpm_boot:0
  243. [ 1.230529] k3dh probe start!!
  244. [ 1.230621] sensor_power_on_vdd: vdd_2p85=2, vdd_1p8=2, vdd_2p_4=0, vdd_2p85_mag=0
  245. [ 1.231201] k3dh probe success!!
  246. [ 1.231506] sec_jack:sec_jack_probe : Registering jack driver
  247. [ 1.231781] input: sec_jack as /devices/virtual/input/input1
  248. [ 1.232666] pm8xxx_upl_probe: OK
  249. [ 1.233825] TZCOM: unable to get bus clk
  250. [ 1.233917] is_lpcharging_state: is_lpm_boot:0
  251. [ 1.234008] a2220_init
  252. [ 1.234436] i2c-core: driver [audience_a2220] using legacy suspend method
  253. [ 1.234527] i2c-core: driver [audience_a2220] using legacy resume method
  254. [ 1.234893] level device init
  255. [ 1.235076] init tzicaudience_a2220 :a2220_ioctl : lsj:: a2220_firmware_buf = 77912
  256. [ 1.241607] audience_a2220 :a2220_ioctl: creating thread..
  257. [ 1.241790] init_a2220 -
  258. [ 1.241821] audience_a2220 :a2220_init_thread
  259. [ 1.242065] adie_codec_register_codec_operations: codec type 1
  260. [ 1.242645] Loading pn544 driver
  261. [ 1.242858] pn544_probe : IRQ num 628
  262. [ 1.243255] pn544_probe : requesting IRQ 628
  263. [ 1.244232] SCSI Media Changer driver v0.25
  264. [ 1.244567] gpio_request: gpio-33 (spi_mosi) status -16
  265. [ 1.244659] (NULL device *): msm_spi_request_gpios: gpio_request for pin 33 failed with error -16
  266. [ 1.244842] spi_qsd: probe of spi_qsd.0 failed with error -16
  267. [ 1.245178] PPP generic driver version 2.4.2
  268. [ 1.245574] PPP Deflate Compression module registered
  269. [ 1.245666] PPP BSD Compression module registered
  270. [ 1.246551] PPP MPPE Compression module registered
  271. [ 1.246643] NET: Registered protocol family 24
  272. [ 1.246795] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
  273. [ 1.246887] CSLIP: code copyright 1989 Regents of the University of California.
  274. [ 1.247406] tun: Universal TUN/TAP device driver, 1.6
  275. [ 1.247497] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
  276. [ 1.248474] smsc911x: Driver version 2008-10-21
  277. [ 1.248809] usbcore: registered new interface driver asix
  278. [ 1.248992] usbcore: registered new interface driver cdc_ether
  279. [ 1.249114] usbcore: registered new interface driver net1080
  280. [ 1.249298] usbcore: registered new interface driver cdc_subset
  281. [ 1.249389] usbcore: registered new interface driver zaurus
  282. [ 1.249572] cdc_ncm: 04-Aug-2011
  283. [ 1.249694] usbcore: registered new interface driver cdc_ncm
  284. [ 1.249847] rmnet_init: SMD devices[8]
  285. [ 1.253723] rmnet_init: SDIO devices[8]
  286. [ 1.255920] msm_hsusb_smb328a_vbus_power attached 0
  287. [ 1.258117] msm_otg msm_otg: success to host_notify_dev_register
  288. [ 1.258392] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  289. [ 1.258789] host driver registered w/ tranceiver
  290. [ 1.259063] usbcore: registered new interface driver cdc_acm
  291. [ 1.259216] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  292. [ 1.259429] usbcore: registered new interface driver usblp
  293. [ 1.259521] Initializing USB Mass Storage driver...
  294. [ 1.259643] usbcore: registered new interface driver usb-storage
  295. [ 1.259796] USB Mass Storage support registered.
  296. [ 1.259918] usbcore: registered new interface driver ums-alauda
  297. [ 1.260101] usbcore: registered new interface driver ums-cypress
  298. [ 1.260223] usbcore: registered new interface driver ums-datafab
  299. [ 1.260406] usbcore: registered new interface driver ums-freecom
  300. [ 1.260589] usbcore: registered new interface driver ums-isd200
  301. [ 1.260711] usbcore: registered new interface driver ums-jumpshot
  302. [ 1.260986] usbcore: registered new interface driver ums-karma
  303. [ 1.261108] usbcore: registered new interface driver ums-onetouch
  304. [ 1.261322] usbcore: registered new interface driver ums-sddr09
  305. [ 1.261444] usbcore: registered new interface driver ums-sddr55
  306. [ 1.261627] usbcore: registered new interface driver ums-usbat
  307. [ 1.261749] usbcore: registered new interface driver usb_ehset_test
  308. [ 1.262145] peripheral driver registered w/ tranceiver
  309. [ 1.262268] msm_otg_sm_work 1868 id=0 OTG_STATE_UNDEFINED
  310. [ 1.262603] init
  311. [ 1.262878] usb: android_probe pdata: c0c74d2c
  312. [ 1.263122] usb: android_bind disconnect
  313. [ 1.265045] android_usb gadget: Mass Storage Function, version: 2009/09/11
  314. [ 1.265167] android_usb gadget: Number of LUNs=2
  315. [ 1.265319] lun0: LUN: removable file: (no medium)
  316. [ 1.265411] lun1: LUN: removable file: (no medium)
  317. [ 1.265808] usb: composite_bind idVendor=0x0, idProduct=0x0
  318. [ 1.265960] usb: composite_bind bcdDevice=0x0
  319. [ 1.266052] usb: composite_bind composite_manufacturer=
  320. [ 1.266235] android_usb gadget: android_usb ready
  321. [ 1.267913] DIAG registered SDIO device
  322. [ 1.268493] diagchar initialized now
  323. [ 1.268920] mousedev: PS/2 mouse device common for all mice
  324. [ 1.270477] input: ffa-keypad as /devices/platform/msm_ssbi.0/pm8058-core/pm8xxx-keypad/input/input2
  325. [ 1.271453] is_lpcharging_state: is_lpm_boot:0
  326. [ 1.271636] [TSP] mxt224_probe
  327. [ 1.271820] input: sec_touchscreen as /devices/virtual/input/input3
  328. [ 1.272186] mxt224_power_on: enter
  329. [ 1.272766] [TSP POWER ON L1 3.3 enable
  330. [ 1.273284] [TSP POWER ON L4 1.8 enable
  331. [ 1.273376] mxt224_power_on: exit
  332. [ 1.330841] mxt224_power_on is finished
  333. [ 1.341979] audience_a2220 :a2220_bootup_init : lsj::a2220_bootup_init +
  334. [ 1.372192] qt602240_ts 0-004a: family = 0x81, variant = 0x1, version = 0x10, build = 170
  335. [ 1.372283] [TSP] family = 0x81, variant = 0x1, version = 0x10, build = 170
  336. [ 1.397003] [TSP] TSP chip is MXT224-E
  337. [ 1.397674] [TSP]user_info_value is 0
  338. [ 1.400878] audience_a2220 :a2220_bootup_init : lsj::a2220_bootup_init 1
  339. [ 1.401062] audience_a2220 :a2220_bootup_init : lsj::a2220_bootup_init 2
  340. [ 1.402313] audience_a2220 :a2220_bootup_init : lsj::a2220_bootup_init 3
  341. [ 1.402404] audience_a2220 :a2220_bootup_init : lsj::a2220_bootup_init 4
  342. [ 1.402557] a2220_bootup_init: starting to load image (2435 passes)...
  343. [ 1.490966] msm_otg_sm_work 1871 id=1 OTG_STATE_UNDEFINED
  344. [ 1.491058] msm_otg_sm_work 1893 OTG_STATE_UNDEFINED
  345. [ 1.491149] msm_otg_sm_work 1903 OTG_STATE_UNDEFINED
  346. [ 1.491302] msm_otg_sm_work 1908 OTG_STATE_B_IDLE
  347. [ 1.491394] msm_hsusb_pmic_id_notif_init: USB_ID is not routed to PMIC
  348. [ 1.491912] msm_otg_suspend: usb in low power mode
  349. [ 1.500915] [TSP] ta_status is 0
  350. [ 1.501098] [TSP] mxt224_ta_probe
  351. [ 1.511108] [TSP]TA_probe MXT224E T48 Byte2 is 114
  352. [ 1.513824] [TSP]calibration success!!!
  353. [ 1.514434] [TSP] mxt224_probe e
  354. [ 1.514862] input: pmic8xxx_pwrkey as /devices/platform/msm_ssbi.0/pm8058-core/pm8xxx-pwrkey/input/input4
  355. [ 1.515594] [TSP] Calibration End!!!!!!
  356. [ 1.515716] [TSP] Clearing unused slots
  357. [ 1.517730] using rtc device, pm8xxx_rtc, for alarms
  358. [ 1.517944] rtc-pm8xxx rtc-pm8xxx: rtc core: registered pm8xxx_rtc as rtc0
  359. [ 1.518463] i2c /dev entries driver
  360. [ 1.518798] [TSP] Calibration End!!!!!!
  361. [ 1.518920] [TSP] Clearing unused slots
  362. [ 1.521270] is_lpcharging_state: is_lpm_boot:0
  363. [ 1.521423] yda165:yda165_init
  364. [ 1.521545] yda165:yda165_probe
  365. [ 1.521636] yda165:yda165_probe
  366. [ 1.521789] yda165_probe: OK
  367. [ 1.522094] yda165:Override hp_gainup for Rev0.3A and afterwards (14)
  368. [ 1.522247] yda165:load_ampgain completed
  369. [ 1.522430] is_lpcharging_state: is_lpm_boot:0
  370. [ 1.522735] sensor_power_on_vdd: vdd_2p85=3, vdd_1p8=3, vdd_2p_4=0, vdd_2p85_mag=0
  371. [ 1.522918] opt_i2c_probe(797):
  372. [ 1.523010] opt_i2c_probe, 798 : start!!!
  373. [ 1.523162] GP2A opt i2c attach success!!!
  374. [ 1.523223] GP2A opt i2c attach success!!!
  375. [ 1.523315] opt_i2c_probe, 817 : end!!!
  376. [ 1.524139] opt_i2c_read(459): : 0x0, 0xfe
  377. [ 1.524353] input: proximity_sensor as /devices/virtual/input/input5
  378. [ 1.524780] opt_i2c_client : (0xd7258800)
  379. [ 1.525329] opt_i2c_write(488): : 0x4, 0x2
  380. [ 1.525421] gp2a_opt_probe is OK!!
  381. [ 1.526123] is_lpcharging_state: is_lpm_boot:0
  382. [ 1.527069] input: light_sensor as /devices/virtual/input/input6
  383. [ 1.527770] input: fsa9480 as /devices/i2c-5/5-0025/input/input7
  384. [ 1.530731] fsa9480 5-0025: fsa9480_reg_init dev ID: 0x0
  385. [ 1.530944] i2c-core: driver [fsa9480] using legacy resume method
  386. [ 1.531188] is_lpcharging_state: is_lpm_boot:0
  387. [ 1.531311] [GYRO] k3g_probe start!
  388. [ 1.531494] sensor_power_on_vdd: vdd_2p85=4, vdd_1p8=4, vdd_2p_4=0, vdd_2p85_mag=0
  389. [ 1.531951] input: gyro_sensor as /devices/virtual/input/input8
  390. [ 1.533630] input: orientation_sensor as /devices/virtual/input/input9
  391. [ 1.534149] lirc_dev: IR Remote Control driver registered, major 236
  392. [ 1.534301] IR NEC protocol handler initialized
  393. [ 1.534393] IR RC5(x) protocol handler initialized
  394. [ 1.534545] IR RC6 protocol handler initialized
  395. [ 1.534637] IR JVC protocol handler initialized
  396. [ 1.534820] IR Sony protocol handler initialized
  397. [ 1.534912] IR RC5 (streamzap) protocol handler initialized
  398. [ 1.535095] IR LIRC bridge handler initialized
  399. [ 1.535186] Linux video capture interface: v2.00
  400. [ 1.535339] usbcore: registered new interface driver uvcvideo
  401. [ 1.535522] USB Video Class driver (v1.1.0)
  402. [ 1.536560] is_lpcharging_state: is_lpm_boot:0
  403. [ 1.536773] [TSP] Calibration!!!!!!############# M5MO probe ##############
  404. [ 1.536956] [M5MO] m5mo_sensor_probe : E
  405. [ 1.537109] [M5MO] m5mo_i2c_init : E
  406. [ 1.537231] [M5MO] m5mo_i2c_probe : E
  407. [ 1.537322] [M5MO] m5mo_i2c_probe : m5mo_i2c_probe X
  408. [ 1.537322]
  409. [ 1.538940] is_lpcharging_state: is_lpm_boot:0
  410. [ 1.539215] ############# S5K5BAFX probe ##############
  411. [ 1.539764] [5BAFX] s5k5bafx_sensor_probe : E
  412. [ 1.539855] [5BAFX] s5k5bafx_i2c_init : E
  413. [ 1.539978] [5BAFX] s5k5bafx_i2c_probe : E
  414. [ 1.540130] [5BAFX] s5k5bafx_i2c_probe : X
  415. [ 1.540283] [5BAFX] s5k5bafx_sensor_probe:1325:rc = 0
  416. [ 1.541809] I2C radio driver for Qualcomm FM Radio Transceiver , Version 1.0.0
  417. [ 1.542236] max17040_probe: MAX17043 driver Loading!
  418. [ 1.542449] max17040_get_version :
  419. [ 1.543334] max17040 15-0036: MAX17040 Fuel-Gauge Ver 03
  420. [ 1.544189] max17040_get_rcomp : current rcomp = 0xe71f(231)
  421. [ 1.545471] max17040_get_rcomp : current rcomp = 0xe71f(231)
  422. [ 1.548980] i2c-core: driver [max17040] using legacy suspend method
  423. [ 1.549133] i2c-core: driver [max17040] using legacy resume method
  424. [ 1.549285] smb328a_probe: SMB328A driver Loading!
  425. [ 1.549438] is_lpcharging_state: is_lpm_boot:0
  426. [ 1.552642] i2c-core: driver [smb328a] using legacy suspend method
  427. [ 1.552795] i2c-core: driver [smb328a] using legacy resume method
  428. [ 1.553619] msm_adc successfully registered
  429. [ 1.554260] device-mapper: uevent: version 1.0.3
  430. [ 1.554748] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: [email protected]
  431. [ 1.555053] Bluetooth: HCI UART driver ver 2.2
  432. [ 1.555145] Bluetooth: HCI H4 protocol initialized
  433. [ 1.555297] Bluetooth: HCI_IBS protocol initialized
  434. [ 1.555389] [BT] bluesleep_init Ver 1.1
  435. [ 1.556091] cpuidle: using governor ladder
  436. [ 1.556243] cpuidle: using governor menu
  437. [ 1.556945] mmc0: mci-version: 0
  438. [ 1.557067] mmc0: No card detect facilities available
  439. [ 1.557617] mmc0: Qualcomm MSM SDCC-core at 0x0000000012400000 irq 136,0 dma 18 dmacrcri 1
  440. [ 1.557769] mmc0: 8 bit data mode enabled
  441. [ 1.557861] mmc0: 4 bit data mode disabled
  442. [ 1.557952] mmc0: polling status mode disabled
  443. [ 1.558105] mmc0: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz
  444. [ 1.558197] mmc0: Slot eject status = 0
  445. [ 1.558349] mmc0: Power save feature enable = 1
  446. [ 1.558441] mmc0: DM non-cached buffer at ffda0000, dma_addr 0x567c0000
  447. [ 1.558593] mmc0: DM cmd busaddr 0x567c0000, cmdptr busaddr 0x567d7f40
  448. [ 1.559082] mmc1: mci-version: 0
  449. [ 1.559692] mmc1: Qualcomm MSM SDCC-core at 0x0000000012140000 irq 135,0 dma 19 dmacrcri 4
  450. [ 1.559844] mmc1: 8 bit data mode enabled
  451. [ 1.560028] mmc1: 4 bit data mode disabled
  452. [ 1.560089] mmc1: polling status mode disabled
  453. [ 1.560180] mmc1: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz
  454. [ 1.560363] mmc1: Slot eject status = 0
  455. [ 1.560424] mmc1: Power save feature enable = 1
  456. [ 1.560607] mmc1: DM non-cached buffer at ffd80000, dma_addr 0x567e0000
  457. [ 1.560699] mmc1: DM cmd busaddr 0x567e0000, cmdptr busaddr 0x567f7f40
  458. [ 1.561309] mmc2: mci-version: 0
  459. [ 1.562103] mmc2: Qualcomm MSM SDCC-core at 0x0000000012180000 irq 134,642 dma 20 dmacrcri 2
  460. [ 1.562255] mmc2: 8 bit data mode disabled
  461. [ 1.562347] mmc2: 4 bit data mode enabled
  462. [ 1.562438] mmc2: polling status mode disabled
  463. [ 1.562591] mmc2: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz
  464. [ 1.562683] mmc2: Slot eject status = 0
  465. [ 1.562835] mmc2: Power save feature enable = 1
  466. [ 1.562927] mmc2: DM non-cached buffer at ffd60000, dma_addr 0x56000000
  467. [ 1.563110] mmc2: DM cmd busaddr 0x56000000, cmdptr busaddr 0x56017f40
  468. [ 1.563629] mmc3: mci-version: 0
  469. [ 1.563781] mmc3: No card detect facilities available
  470. [ 1.564331] mmc3: Qualcomm MSM SDCC-core at 0x00000000121c0000 irq 133,0 dma 21 dmacrcri 5
  471. [ 1.564483] mmc3: 8 bit data mode disabled
  472. [ 1.564575] mmc3: 4 bit data mode enabled
  473. [ 1.564697] [TSP] Calibration End!!!!!!
  474. [ 1.564849] [TSP] Clearing unused slots
  475. [ 1.565063] mmc3: polling status mode disabled
  476. [ 1.565155] mmc3: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz
  477. [ 1.565307] mmc3: Slot eject status = 0
  478. [ 1.565399] mmc3: Power save feature enable = 1
  479. [ 1.565551] mmc3: DM non-cached buffer at ffd40000, dma_addr 0x56020000
  480. [ 1.565643] mmc3: DM cmd busaddr 0x56020000, cmdptr busaddr 0x56037f40
  481. [ 1.566223] mmc4: mci-version: 0
  482. [ 1.566925] mmc4: Qualcomm MSM SDCC-core at 0x0000000012200000 irq 220,0 dma 21 dmacrcri 14
  483. [ 1.567077] mmc4: 8 bit data mode disabled
  484. [ 1.567169] mmc4: 4 bit data mode enabled
  485. [ 1.567321] mmc4: polling status mode disabled
  486. [ 1.567413] mmc4: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz
  487. [ 1.567504] mmc4: Slot eject status = 0
  488. [ 1.567657] mmc4: Power save feature enable = 1
  489. [ 1.567749] mmc4: DM non-cached buffer at ffd20000, dma_addr 0x56040000
  490. [ 1.567932] mmc4: DM cmd busaddr 0x56040000, cmdptr busaddr 0x56057f40
  491. [ 1.568695] Registered led device: camera:flash0
  492. [ 1.568908] Registered led device: camera:flash1
  493. [ 1.570404] usbcore: registered new interface driver usbhid
  494. [ 1.570587] usbhid: USB HID core driver
  495. [ 1.571441] logger: created 512K log 'log_main'
  496. [ 1.571685] logger: created 256K log 'log_events'
  497. [ 1.572021] logger: created 512K log 'log_radio'
  498. [ 1.572265] logger: created 256K log 'log_system'
  499. [ 1.572418] sec_getlog_supply_loggerinfo: 0xc119e1bc 0xc121e1bc 0xc129e1bc 0xc12de1bc
  500. [ 1.573242] usbcore: registered new interface driver snd-usb-audio
  501. [ 1.574432] msm-cpu-dai msm-cpu-dai.0: asoc_msm_cpu_probe: dev name msm-cpu-dai.0
  502. [ 1.574798] msm-codec-dai msm-codec-dai.0: asoc_msm_codec_probe: dev name msm-codec-dai.0
  503. [ 1.575103] msm-dsp-audio msm-dsp-audio.0: msm_pcm_probe: dev name msm-dsp-audio.0
  504. [ 1.576690] asoc: msm-codec-dai <-> msm-cpu-dai.0 mapping ok
  505. [ 1.578338] ALSA device list:
  506. [ 1.578491] #0: msm-audio
  507. [ 1.579040] oprofile: using arm/armv7-scorpionmp
  508. [ 1.579284] Mirror/redirect action on
  509. [ 1.579437] u32 classifier
  510. [ 1.579528] Actions configured
  511. [ 1.579620] Netfilter messages via NETLINK v0.30.
  512. [ 1.579833] nf_conntrack version 0.5.0 (12268 buckets, 49072 max)
  513. [ 1.580322] ctnetlink v0.93: registering with nfnetlink.
  514. [ 1.580505] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
  515. [ 1.580596] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
  516. [ 1.581420] xt_time: kernel timezone is -0000
  517. [ 1.581665] ip_tables: (C) 2000-2006 Netfilter Core Team
  518. [ 1.582000] arp_tables: (C) 2002 David S. Miller
  519. [ 1.582153] TCP cubic registered
  520. [ 1.582244] Initializing XFRM netlink socket
  521. [ 1.582916] NET: Registered protocol family 10
  522. [ 1.584838] Mobile IPv6
  523. [ 1.584960] ip6_tables: (C) 2000-2006 Netfilter Core Team
  524. [ 1.585235] IPv6 over IPv4 tunneling driver
  525. [ 1.586181] NET: Registered protocol family 17
  526. [ 1.586364] NET: Registered protocol family 15
  527. [ 1.591522] Bluetooth: RFCOMM TTY layer initialized
  528. [ 1.591613] Bluetooth: RFCOMM socket layer initialized
  529. [ 1.591766] Bluetooth: RFCOMM ver 1.11
  530. [ 1.591857] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  531. [ 1.592010] Bluetooth: BNEP filters: protocol multicast
  532. [ 1.592102] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  533. [ 1.592376] Registering the dns_resolver key type
  534. [ 1.592498] vfp_init : affinity set to CPU 1
  535. [ 1.592590] VFP support v0.3: implementor 51 architecture 64 part 2d variant 0 rev 0
  536. [ 1.592834] vfp_init : affinity restored to 3
  537. [ 1.592956] Registering SWP/SWPB emulation handler
  538. [ 1.600036] clock_late_init() disabled 182 unused clocks
  539. [ 1.644439] set_dload_mode <0> ( c0017754 )
  540. [ 1.645538] [TKEY] touchkey_init START
  541. [ 1.645629] is_lpcharging_state: is_lpm_boot:0
  542. [ 1.646697] [TKEY] melfas i2c_touchkey_probe
  543. [ 1.646850] OKGA [TKEY] melfas i2c_touchkey_probe
  544. [ 1.647064] input: melfas_touchkey as /devices/virtual/input/input10
  545. [ 1.647796] [TKEY] enter touchkey_auto_calibration
  546. [ 1.648620] write value 80 to address 32
  547. [ 1.673675] mmc0: new high speed MMC card at address 0001
  548. [ 1.674041] mmc_can_erase: called
  549. [ 1.674224] mmcblk0: mmc0:0001 KYL00M 14.6 GiB
  550. [ 1.677337] mmcblk0: p1 p2 p3 p4 < p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 >
  551. [ 1.696014] after touchkey_auto_calibration result = 1
  552. [ 1.696594] [TKEY] touchkey_init END
  553. [ 1.698303] rtc-pm8xxx rtc-pm8xxx: setting system clock to 2012-08-21 07:38:51 UTC (1345534731)
  554. [ 1.698913] sec-battery sec-battery: sec_bat_probe: SEC Battery Driver Loading
  555. [ 1.700164] sec_bat_get_lpcharging_state: LP charging:0
  556. [ 1.704071] [fg] p:7503, s1:79, s2:100, v:4098750, t:0
  557. [ 1.704254] sec_bat_measure_work: adc work already on a queue
  558. [ 1.705291] Warning: unable to open an initial console.
  559. [ 1.706390] Freeing init memory: 992K
  560. [ 1.708312] sec_bat_get_lpcharging_state: LP charging:0
  561. [ 1.709411] mmc1: host doesn't support card's voltages
  562. [ 1.709716] mmc1: error -22 whilst initialising SDIO card
  563. [ 1.709777] init: /init.qcom.rc: 363: ignored duplicate definition of service 'p2p_supplicant'
  564. [ 1.710937] init: could not import file '/system/etc/init.local.rc' from '/init.rc'
  565. [ 1.712310] mmc1: host doesn't support card's voltages
  566. [ 1.712341] init: /init.emmc.rc: 282: ignored duplicate definition of service 'ril-daemon'
  567. [ 1.712768] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
  568. [ 1.713653] mmc1: error -22 whilst initialising MMC card
  569. [ 1.743103] pmic8058_xoadc:The offset for AMUX calibrationwas -552
  570. [ 1.843566] sec_switch_init_work value = 1
  571. [ 1.843658] sec_switch_set_vbus_status USB_VBUS_AP_ON 2
  572. [ 1.863159] fsa9480_manual_switching(0)
  573. [ 2.313354] EXT4-fs (mmcblk0p24): mounted filesystem with ordered data mode. Opts: barrier=1
  574. [ 2.314575] fs_mgr: Running /system/bin/e2fsck on /dev/block/mmcblk0p26
  575. [ 2.338928] gpio_request: gpio-251 (SD_WP_Switch) status -22
  576. [ 2.339904] msm_sdc3_get_wpswitch:Failed to request GPIO 251
  577. [ 2.340820] mmc2: host does not support reading read-only switch. assuming write-enable.
  578. [ 2.345489] mmc2: new high speed SDHC card at address b368
  579. [ 2.348114] mmc_can_erase: called
  580. [ 2.349609] mmcblk1: mmc2:b368 SD 14.9 GiB
  581. [ 2.357055] mmcblk1: p1
  582. [ 2.483337] mmc4: host doesn't support card's voltages
  583. [ 2.483551] mmc4: error -22 whilst initialising SDIO card
  584. [ 2.485534] mmc4: host doesn't support card's voltages
  585. [ 2.485900] mmc4: error -22 whilst initialising MMC card
  586. [ 2.548065] EXT4-fs (mmcblk0p26): mounted filesystem with ordered data mode. Opts: barrier=1
  587. [ 2.570159] EXT4-fs (mmcblk0p21): mounted filesystem with ordered data mode. Opts: barrier=1
  588. [ 2.571289] fs_mgr: Running /system/bin/e2fsck on /dev/block/mmcblk0p25
  589. [ 2.700317] EXT4-fs (mmcblk0p25): mounted filesystem with ordered data mode. Opts: barrier=1,noauto_da_alloc
  590. [ 2.701782] sec_bat_measure_work: adc work already on a queue
  591. [ 2.787200] EXT4-fs (mmcblk0p24): re-mounted. Opts: (null)
  592. [ 3.241821] sec_jack:sec_jack_det_irq_handler : ready = 1.
  593. [ 3.242462] sec_jack:sec_jack_set_type return, same type reason
  594. [ 3.242767] sec_jack:sec_jack_set_type return, jack_type = 0, hi->cur_jack_type = 0
  595. [ 3.243316] sec_jack: ear micbias off
  596. [ 3.278717] EXT4-fs (mmcblk0p24): re-mounted. Opts: barrier=0
  597. [ 3.307250] EXT4-fs (mmcblk0p27): mounted filesystem with ordered data mode. Opts: barrier=1
  598. [ 3.634826] init: cannot find '/system/bin/macloader', disabling 'macloader'
  599. [ 3.635009] init: cannot find '/system/bin/iwland', disabling 'iwland'
  600. [ 3.635620] init: cannot find '/system/bin/bintvoutservice', disabling 'TvoutService_C'
  601. [ 3.702056] sec_bat_measure_work: adc work already on a queue
  602. [ 3.708831] init: using deprecated syntax for specifying property 'ro.manufacturer', use ${name} instead
  603. [ 3.709228] init: property 'ro.manufacturer' doesn't exist while expanding '$ro.manufacturer'
  604. [ 3.709594] init: cannot expand '$ro.manufacturer' while writing to '/sys/class/android_usb/android0/iManufacturer'
  605. [ 3.709991] init: using deprecated syntax for specifying property 'ro.model', use ${name} instead
  606. [ 3.710205] init: property 'ro.model' doesn't exist while expanding '$ro.model'
  607. [ 3.710571] init: cannot expand '$ro.model' while writing to '/sys/class/android_usb/android0/iProduct'
  608. [ 3.710968] init: using deprecated syntax for specifying property 'ro.serialno', use ${name} instead
  609. [ 3.713073] mass_storage_vendor_store: vendor SAMSUNG
  610. [ 3.713378] mass_storage_product_store: product SGH-T989[VIBETONZ:WJYOO] MISC_REGISTER nRet = 0
  611. [ 3.725921] android vib clk failed!!!
  612. [ 3.726165] vibrator I2C attach success!!!
  613. [ 3.726562] [VIBETONZ] ImmVibeSPI_ForceOut_Initialize
  614. [ 3.746734] [VIBETONZ] ImmVibeSPI_ForceOut_AmpDisable
  615. [ 3.758850] init: service 'console' requires console
  616. [ 3.759826] init: cannot find '/system/bin/hdmid', disabling 'hdmid'
  617. [ 3.760864] init: cannot find '/system/bin/time_daemon', disabling 'time_daemon'
  618. [ 3.819000] EXT4-fs (mmcblk0p24): re-mounted. Opts: barrier=0
  619. [ 3.979766] warning: `rild' uses 32-bit capabilities (legacy support in use)
  620. [ 4.110687] EXT4-fs (mmcblk0p24): re-mounted. Opts: barrier=0
  621. [ 4.115478] init: service 'console' requires console
  622. [ 4.123962] usb: enable_store enabled=0, !dev->enabled=1
  623. [ 4.124206] audience_a2220 :a2220_bootup_init : lsj::a2220_bootup_init 5
  624. [ 4.125244] audience_a2220 :a2220_bootup_init : lsj::a2220_bootup_init 6
  625. [ 4.125518] audience_a2220 :a2220_bootup_init : lsj::a2220_bootup_init 7
  626. [ 4.126983] usb: functions_store buff=mass_storage,adb
  627. [ 4.127502] usb: android_enable_function name=mass_storage
  628. [ 4.127807] usb: android_enable_function name=adb
  629. [ 4.128509] usb: enable_store enabled=1, !dev->enabled=1
  630. [ 4.128784] usb: enable_store f:mass_storage
  631. [ 4.129302] usb: enable_store f:adb
  632. [ 4.129608] usb: enable_store vendor=18d1,product=4e22,bcdDevice=231
  633. [ 4.129882] ,Class=0,SubClass=0,Protocol=0
  634. [ 4.130737] usb: enable_store next cmd : usb_add_config
  635. [ 4.132781] init: using deprecated syntax for specifying property 'sys.usb.config', use ${name} instead
  636. [ 4.144378] adb_open
  637. [ 4.144500] usb: android_bind_enabled_functions f:mass_storage
  638. [ 4.144744] usb: android_bind_enabled_functions f:adb
  639. [ 4.144866] adb_bind_config
  640. [ 4.152191] a2220_bootup_init: firmware loaded successfully
  641. [ 4.188171] init: cannot find '/system/bin/quipc_igsn', disabling 'quipc_igsn'
  642. [ 4.194091] init: cannot find '/system/bin/quipc_main', disabling 'quipc_main'
  643. [ 4.259063] charm_modem_ioctl: Entering ioctl cmd = 1
  644. [ 4.259979] charm_modem_ioctl: Powering on
  645. [ 4.362670] audience_a2220 :a2220_bootup_init : lsj::a2220_bootup_init 8
  646. [ 4.362854] audience_a2220 :a2220_bootup_init : get_hw_rev of Target = 14
  647. [ 4.362945] audience_a2220 :a2220_bootup_init : lsj::a2220_bootup_init 9
  648. [ 4.363769] audience_a2220 :execute_cmdmsg : ...go to suspend first
  649. [ 4.363861] audience_a2220 :a2220_bootup_init : lsj::a2220_bootup_init 10
  650. [ 4.491821] audience_a2220 :a2220_bootup_init : lsj::a2220_bootup_init 11
  651. [ 4.492004] a2220_bootup_init: initialized!
  652. [ 4.492095] audience_a2220 :a2220_bootup_init : a2220_bootup_init - finish
  653. [ 4.702117] sec_bat_measure_work: adc work already on a queue
  654. [ 4.963470] msm_release_control: control0
  655. [ 4.964019] __msm_release, open count =0
  656. [ 4.964935] __msm_release, release VFE
  657. [ 5.076385] auddev_cb_function, evt_id=64,
  658. [ 5.077026] msm_reset_put:Resetting all devices
  659. [ 5.077758] msm_clear_all_session:
  660. [ 5.626708] hdmi_msm hdmi_msm.1: hdmi_msm_hpd_feature: 1
  661. [ 5.626983] EXT_COMMON: hdmi_common_wta_hpd: '1'
  662. [ 6.003356] mdp4_overlay_mdp_perf_upd mdp clk is changed [1] from 0 to 34910000
  663. [ 7.461914] msmsdcc_runtime_suspend: Enter WIFI suspend
  664. [ 7.532043] fsa9480 5-0025: fsa9480_init_detect
  665. [ 7.533966] fsa9480 5-0025: dev1: 0x40, dev2: 0x0
  666. [ 7.534118] fsa9480 5-0025: charger connect
  667. [ 7.534240] fsa9480_charger_cb attached 1
  668. [ 7.534484] [TSP] mxt224_ta_probe
  669. [ 7.546356] [TSP]TA_probe MXT224E T48 Byte2 is 114
  670. [ 7.546386] sec-battery sec-battery: sec_bat_set_property: cable was changed(2)
  671. [ 7.550750] [TSP] Calibration!!!!!!
  672. [ 7.579284] [TSP] Calibration End!!!!!!
  673. [ 7.579925] [TSP] Clearing unused slots
  674. [ 8.042083] smb328a 15-0034: smb328a_set_charging_current :
  675. [ 8.043151] smb328a 15-0034: smb328a_set_command_reg : reg (0x31) = 0xad
  676. [ 8.045318] smb328a_set_command_reg : => reg (0x31) = 0xad
  677. [ 8.047149] smb328a 15-0034: smb328a_charger_function_conrol : reg (0x0) = 0x97
  678. [ 8.048095] smb328a 15-0034: smb328a_charger_function_conrol : reg (0x1) = 0xb0
  679. [ 8.049011] smb328a 15-0034: smb328a_charger_function_conrol : reg (0x2) = 0xca
  680. [ 8.049957] smb328a 15-0034: smb328a_charger_function_conrol : reg (0x3) = 0xda
  681. [ 8.050872] smb328a 15-0034: smb328a_charger_function_conrol : reg (0x4) = 0x4f
  682. [ 8.062622] smb328a 15-0034: smb328a_charger_function_conrol : => reg (0x4) = 0x4d
  683. [ 8.063140] smb328a 15-0034: smb328a_charger_function_conrol : reg (0x5) = 0x0
  684. [ 8.063598] smb328a 15-0034: smb328a_charger_function_conrol : reg (0x6) = 0x6d
  685. [ 8.064361] smb328a 15-0034: smb328a_charger_function_conrol : => reg (0x6) = 0x55
  686. [ 8.064880] smb328a 15-0034: smb328a_charger_function_conrol : reg (0x7) = 0xf6
  687. [ 8.065338] smb328a 15-0034: smb328a_charger_function_conrol : reg (0x8) = 0x0
  688. [ 8.065856] smb328a 15-0034: smb328a_charger_function_conrol : reg (0x9) = 0x1
  689. [ 8.065948] smb328a 15-0034: smb328a_get_input_current_limit :
  690. [ 8.066436] smb328a 15-0034: smb328a_get_input_current_limit : reg (0x1) = 0xb0
  691. [ 8.066589] smb328a 15-0034: smb328a_get_input_current_limit : get icl = 1000, data = 5
  692. [ 8.067016] smb328a 15-0034: smb328a_get_float_voltage : reg (0x2) = 0xca, float vol = 4200
  693. [ 8.067871] smb328a 15-0034: smb328a_set_top_off : reg (0x0) = 0x97
  694. [ 8.068664] smb328a 15-0034: smb328a_set_top_off : => reg (0x0) = 0x97
  695. [ 8.069091] smb328a 15-0034: smb328a_set_top_off : reg (0x7) = 0xf6
  696. [ 8.069854] smb328a 15-0034: smb328a_set_top_off : => reg (0x7) = 0xf6
  697. [ 8.070648] smb328a 15-0034: smb328a_ldo_disable :
  698. [ 8.071502] smb328a 15-0034: smb328a_ldo_disable : reg (0x6) = 0x55
  699. [ 8.072235] smb328a 15-0034: smb328a_ldo_disable : => reg (0x6) = 0x75
  700. [ 8.072418] smb328a 15-0034: smb328a_enable_charging :
  701. [ 8.072845] smb328a 15-0034: smb328a_enable_charging : reg (0x31) = 0xad
  702. [ 8.073638] smb328a_enable_charging : => reg (0x31) = 0xad
  703. [ 8.073730] smb328a 15-0034: smb328a_watchdog_control : (1)
  704. [ 8.074584] smb328a 15-0034: smb328a_watchdog_control : reg (0x4) = 0x4d
  705. [ 8.075347] smb328a 15-0034: smb328a_watchdog_control : => reg (0x4) = 0x4f
  706. [ 8.308685] msm8x60_multi_sdio_slot_status_irq: MDM2AP_SYNC Status = 1
  707. [ 8.308685] msm8x60_multi_sdio_slot_status_irq: calling sdc2_status_notify_cb
  708. [ 8.308746] msm8x60_multi_sdio_slot_status_irq: calling sdc5_status_notify_cb
  709. [ 8.361724] mmc1: new high speed SDIO card at address 0002
  710. [ 8.362243] mmc mmc1:0002: SDIO Card claimed.
  711. [ 8.362945] sdio_al:setup bootloader on card 1
  712. [ 8.363098] sdio_al: SDIOC BOOT SW version 0x30001
  713. [ 8.363372] sdio_al: sdio_dld_set_op_mode - FLASHLESS BOOT - Op_Mode is set to SDIO DLD NORMAL MODE
  714. [ 8.363464] sdio_al: sdio_dld_set_op_mode - FLASHLESS BOOT - Op_Mode is set to SDIO DLD NORMAL MODE
  715. [ 8.364562] sdio_al:Bootloader Worker Started, wait for bootloader_done event..
  716. [ 8.364990] sdio_al:In Flashless boot, waiting for its completion
  717. [ 8.365081] sdio_al:free sdioc_boot_sw_header.
  718. [ 8.421966] mmc4: new high speed SDIO card at address 0002
  719. [ 8.422515] mmc mmc4:0002: SDIO Card claimed.
  720. [ 8.422943] sdio_al:wait for bootloader completion on card 4
  721. [ 8.423156] sdio_al:Bootloader Worker Started, wait for bootloader_done event..
  722. [ 9.001495] sdio_al: sdio_dld_open, TTY DEVICE FOR FLASHLESS BOOT OPENED
  723. [ 9.102355] charm_status_change: charm sent status change interrupt
  724. [ 9.102386] charm_status_change: charm is now ready
  725. [ 9.828491] input: compass_sensor as /devices/virtual/input/input11
  726. [ 9.832366] akm8975_ecs_set_mode: ak8975 set AK8975_MODE_POWER_DOWN
  727. [ 9.833953] akm8975_ecs_set_mode: ak8975 set AK8975_MODE_FUSE_ACCESS
  728. [ 9.835845] akm8975_ecs_set_mode: ak8975 set AK8975_MODE_POWER_DOWN
  729. [ 9.875946] akm8975_ecs_set_mode: ak8975 set AK8975_MODE_POWER_DOWN
  730. [ 10.152557] light_enable_store(342): timer started.
  731. [ 10.513183] sensor_power_on_vdd: vdd_2p85=5, vdd_1p8=5, vdd_2p_4=0, vdd_2p85_mag=0
  732. [ 10.513702] 15065
  733. [ 10.514556] LED_onoff: LED_onff = 1
  734. [ 10.533233] opt_i2c_write(488): : 0x1, 0x8
  735. [ 10.534637] opt_i2c_write(488): : 0x2, 0x40
  736. [ 10.536468] opt_i2c_write(488): : 0x3, 0x4
  737. [ 10.537841] opt_i2c_write(488): : 0x4, 0x3
  738. [ 10.539306] opt_i2c_write(488): : 0x4, 0x1
  739. [ 10.591918] proximity_enable_store(246): [PROX] Start proximity = 1
  740. [ 10.592590] opt_i2c_write(488): : 0x4, 0x3
  741. [ 10.864807] [GYRO] k3g_set_enable: dps = 0 CTRL_REG4 = 0x90
  742. [ 10.906829] light_enable_store(337): timer canceled.
  743. [ 10.907501] opt_i2c_write(488): : 0x4, 0x2
  744. [ 10.907501] 15065
  745. [ 10.907501] LED_onoff: LED_onff = 0
  746. [ 10.908294] vreg_set_voltage: 8058_l9: request v=[0, 0] is outside possible v=[750000, 4900000]
  747. [ 10.908355] sensor_power_off_vdd: vdd_2p85=4, vdd_1p8=4, vdd_2p_4=0, vdd_2p85_mag=0
  748. [ 12.123535] sdio_al: sdio_dld_print_info, FLASHLESS BOOT - DURATION IN MSEC = 3130
  749. [ 12.123687] sdio_al: sdio_dld_print_info, FLASHLESS BOOT - BYTES WRITTEN ON SDIO BUS = 27021716...BYTES SENT BY TTY = 27021716
  750. [ 12.123931] sdio_al: sdio_dld_print_info, FLASHLESS BOOT - BYTES RECEIVED ON SDIO BUS = 1692...BYTES SENT TO TTY = 1692
  751. [ 12.124328] sdio_al: sdio_dld_print_info, FLASHLESS BOOT - THROUGHPUT=69 Mbit/Sec
  752. [ 12.124694] sdio_al: sdio_dld_print_info, FLASHLESS BOOT - CLIENT DL_BUFFER_SIZE=16 KB..CLIENT UL_BUFFER=48 KB
  753. [ 12.125061] sdio_al: sdio_dld_print_info, FLASHLESS BOOT - HOST OUTGOING BUFFER_SIZE=48 KB
  754. [ 12.125335] sdio_al: sdio_dld_print_info, FLASHLESS BOOT - CLIENT DL BUFFER ADDRESS = 0x4000
  755. [ 12.125579] sdio_al: sdio_dld_print_info, FLASHLESS BOOT - CLIENT UP BUFFER ADDRESS = 0x8000
  756. [ 12.125946] sdio_al: sdio_dld_print_info, FLASHLESS BOOT - CLIENT - UPLINK BUFFER - READ POINTER = 37268
  757. [ 12.126312] sdio_al: sdio_dld_print_info, FLASHLESS BOOT - CLIENT - UPLINK BUFFER - WRITE POINTER = 37268
  758. [ 12.126708] sdio_al: sdio_dld_print_info, FLASHLESS BOOT - CLIENT - DOWNLINK BUFFER - READ POINTER = 1692
  759. [ 12.127105] sdio_al: sdio_dld_print_info, FLASHLESS BOOT - CLIENT - DOWNLINK BUFFER - WRITE POINTER = 1692
  760. [ 12.127471] sdio_al: sdio_dld_print_info, FLASHLESS BOOT - HOST - OUTGOING BUFFER - READ POINTER = 37268
  761. [ 12.127746] sdio_al: sdio_dld_print_info, FLASHLESS BOOT - HOST - OUTGOING BUFFER - WRITE POINTER = 37268
  762. [ 12.128112] sdio_al: sdio_dld_print_info, FLASHLESS BOOT - END DEBUG INFO
  763. [ 12.128479] sdio_al: sdio_dld_close - Freeing sdio_dld data structure, and returning...
  764. [ 12.128509] sdio_al:Got bootloader_done event..
  765. [ 12.128601] sdio_al:Got bootloader_done event..
  766. [ 12.132751] charm_modem_ioctl: Entering ioctl cmd = 5
  767. [ 12.132965] charm_modem_ioctl: check if charm is booted up
  768. [ 12.133087] charm_modem_ioctl: Entering ioctl cmd = 7
  769. [ 12.133300] charm_modem_ioctl: wait for charm to need images reloaded
  770. [ 13.002502] sdio_al:user_irq enabled
  771. [ 13.002929] sdio_al:SDIOC SW version 0x40202, sdio_al major 0x4 minor 0x202
  772. [ 13.003021] sdio_al:Channel=SDIO_RPC, state=1
  773. [ 13.003112] sdio_al:Channel=SDIO_QMI, state=1
  774. [ 13.003173] sdio_al:Channel=SDIO_DIAG, state=1
  775. [ 13.003234] sdio_al:Channel=SDIO_SMEM, state=1
  776. [ 13.003295] sdio_al:Channel=, state=0
  777. [ 13.003356] sdio_al:Channel=, state=0
  778. [ 13.003417] sdio_al:sdio_al_setup for card 4
  779. [ 13.011718] sdio_al:claim IRQ for card 4
  780. [ 13.014099] rpcrouter_sdio_remote_probe Called
  781. [ 13.014923] sdio_al:ch SDIO_RPC read_threshold=1, write_threshold=576, min_write_avail=544, max_rx_threshold=1088, max_tx_threshold=1152
  782. [ 13.015686] sdio_al:sdio_open SDIO_RPC completed OK
  783. [ 13.015808] sdio_al: setting channel SDIO_RPC as lpm_chan
  784. [ 13.016143] rpcrouter_sdio_remote_probe Completed
  785. [ 16.359802] sdio_al:ch SDIO_QMI read_threshold=1, write_threshold=4096, min_write_avail=4096, max_rx_threshold=8192, max_tx_threshold=8192
  786. [ 16.360961] sdio_al:sdio_open SDIO_QMI completed OK
  787. [ 16.362945] sdio_ctl_probe Begins
  788. [ 16.421966] sdio_al:user_irq enabled
  789. [ 16.422119] sdio_al:SDIOC SW version 0x40202, sdio_al major 0x4 minor 0x202
  790. [ 16.422149] sdio_al:Channel=SDIO_RMNT, state=1
  791. [ 16.422180] sdio_al:Channel=SDIO_DUN, state=1
  792. [ 16.422180] sdio_al:Channel=, state=0
  793. [ 16.422210] sdio_al:Channel=, state=0
  794. [ 16.422210] sdio_al:Channel=, state=0
  795. [ 16.422241] sdio_al:Channel=, state=0
  796. [ 16.422241] sdio_al:sdio_al_setup for card 1
  797. [ 16.430084] sdio_al:claim IRQ for card 1
  798. [ 16.440887] sdio_al:ch SDIO_RMNT read_threshold=1, write_threshold=4096, min_write_avail=1600, max_rx_threshold=15360, max_tx_threshold=8192
  799. [ 16.442932] sdio_al:sdio_open SDIO_RMNT completed OK
  800. [ 16.443084] sdio_al: setting channel SDIO_RMNT as lpm_chan
  801. [ 16.868835] msm_sdio_dmux_open: opened ch 0
  802. [ 17.370269] msm_sdio_dmux_open: opened ch 1
  803. [ 17.370910] msm_sdio_dmux_open: opened ch 2
  804. [ 17.371673] msm_sdio_dmux_open: opened ch 3
  805. [ 17.373291] msm_sdio_dmux_open: opened ch 4
  806. [ 17.373565] msm_sdio_dmux_open: opened ch 5
  807. [ 17.373962] msm_sdio_dmux_open: opened ch 6
  808. [ 17.374237] msm_sdio_dmux_open: opened ch 7
  809. [ 17.601898] ERROR sdio_cmux_open: Wait Timed Out for ch0
  810. [ 17.602172] ERROR sdio_ctl_open: sdio_cmux_open failed with rc -110
  811. [ 19.122192] ERROR sdio_cmux_open: Wait Timed Out for ch0
  812. [ 19.122741] ERROR sdio_ctl_open: sdio_cmux_open failed with rc -110
  813. [ 20.622039] ERROR sdio_cmux_open: Wait Timed Out for ch0
  814. [ 20.622589] ERROR sdio_ctl_open: sdio_cmux_open failed with rc -110
  815. [ 22.122100] ERROR sdio_cmux_open: Wait Timed Out for ch0
  816. [ 22.122619] ERROR sdio_ctl_open: sdio_cmux_open failed with rc -110
  817. [ 22.391845] sdio_al: sdio_enable_func() err=62
  818. [ 22.391967] sdio_al:sdio_open SDIO_DIAG err=62
  819. [ 22.392059] DIAG could not open SDIO channel
  820. [ 22.392303] SDIO_DIAG: probe of SDIO_DIAG failed with error -62
  821. [ 22.427337] rmt_storage_probe: Remote storage RPC client (0x300100a7)initialized
  822. [ 37.904357] [VIBETONZ] enable_vibetonz_from_user : time = 0 msec
  823. [ 37.904479] [VIBETONZ] DISABLE
  824. [ 37.950073] [TouchKey] system calling LED Notification control
  825. [ 37.951660] write value 16 to address 32
  826. [ 37.953308] is_lpcharging_state: is_lpm_boot:0
  827. [ 37.961395] ld9040 get_gamma_value_from_bl >>> bl_value:10, gamma_value: 0.
  828. [ 37.961395] ld9040 brightness!!! bl_level=10, tune_level=0 curr=10
  829. [ 37.962127] ld9040 ACL_cutoff_set Percentage : off!!
  830. [ 37.963592] ld9040 ea8868_gamma_ctl 0 0
  831. [ 38.217071] [BT] Bluetooth Power On.
  832. [ 38.217102] [BT] bcm4330_bt_rfkill_set_power: success to gpio 86: 0
  833. [ 38.217102] [BT] bcm4330_bt_rfkill_set_power: success to gpio 158: 0
  834. [ 38.271972] [BT] bcm4330_bt_rfkill_set_power: success to gpio 46: 0
  835. [ 38.272125] [BT] bcm4330_bt_rfkill_set_power: check potint 1
  836. [ 38.272125]
  837. [ 38.272369] [BT] bcm4330_bt_rfkill_set_power: check potint 2
  838. [ 38.272369]
  839. [ 38.277862] [BT] bluesleep_hostwake_task-hostwake -> 1
  840. [ 38.548767] EXT4-fs (dm-0): mounted filesystem without journal. Opts: (null)
  841. [ 38.672546] ## wifi_probe
  842. [ 38.672546] wifi_set_power = 1
  843. [ 38.672546] brcm_wlan_power: 1
  844. [ 38.673004] [BT] wake_peer is registered.
  845. [ 38.688934] EXT4-fs (dm-0): re-mounted. Opts: (null)
  846. [ 38.706695] EXT4-fs (dm-0): re-mounted. Opts: (null)
  847. [ 38.803619] EXT4-fs (dm-1): mounted filesystem without journal. Opts: (null)
  848. [ 38.940948] EXT4-fs (dm-1): re-mounted. Opts: (null)
  849. [ 38.974151] wifi_set_carddetect = 1
  850. [ 38.974182] msm_device_sdc4.name= 4
  851. [ 38.977508] EXT4-fs (dm-1): re-mounted. Opts: (null)
  852. [ 39.032012] msmsdcc_runtime_resume: Enter WIFI resume
  853. [ 39.086822] mmc3: queuing unknown CIS tuple 0x80 (7 bytes)
  854. [ 39.089172] mmc3: queuing unknown CIS tuple 0x80 (6 bytes)
  855. [ 39.146423] EXT4-fs (dm-2): mounted filesystem without journal. Opts: (null)
  856. [ 39.168182] mmc3: new high speed SDIO card at address 0001
  857. [ 39.170776] alloc static buf at d71c0000!
  858. [ 39.171478] dhdsdio_probe : no mutex held. set lock
  859. [ 39.171752] F1 signature read @0x18000000=0x16834330
  860. [ 39.189910] DHD: dongle ram size is set to 294912(orig 294912)
  861. [ 39.194549] CFG80211-INFO2) wl_cfg80211_attach : wl_cfg80211_attach: wl = 0xd5d06300
  862. [ 39.194885] CFG80211-INFO2) wl_create_event_handler : Enter
  863. [ 39.195220] CFG80211-INFO2) wl_create_event_handler : wl = 0xd5d06300, wl->event_tsk = 0xd5d064fc
  864. [ 39.195678] wl_create_event_handler thr:2a6 created
  865. [ 39.195739] CFG80211-INFO2) wl_event_handler : tsk Enter, tsk = 0xd5d064fc
  866. [ 39.196258] CFG80211-INFO2) wl_event_handler : DAEMONIZE completed
  867. [ 39.196777] CFG80211-INFO2) wl_event_handler : wl_create_event_handler thr:2a6 started
  868. [ 39.198516] tsk completed
  869. [ 39.215667] p2p0: P2P Interface Registered
  870. [ 39.216094] dhd_attach thr:2a7 created
  871. [ 39.218780] dhd_attach thr:2a7 started
  872. [ 39.219177] dhd_attach thr:2a8 created
  873. [ 39.220397] dhd_attach thr:2a8 started
  874. [ 39.220581] dhd_attach thr:2a9 created
  875. [ 39.223052] dhd_attach thr:2a9 started
  876. [ 39.350280] [BT] bluesleep_hostwake_task-hostwake -> 0dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded.
  877. [ 39.453308] EXT4-fs (dm-2): re-mounted. Opts: (null)
  878. [ 39.467742] EXT4-fs (dm-2): re-mounted. Opts: (null)
  879. [ 39.523590] dhd_wl_ioctl_cmd: WLC_GET_VAR: cisdump, error = -23
  880. [ 39.523773] dhd_check_module_cid: CIS reading failed, err=-23
  881. [ 39.525421] dhd_wl_ioctl_cmd: WLC_GET_VAR: p2p, error = -23
  882. [ 39.526214] dhd_wl_ioctl_cmd: WLC_GET_VAR: p2p, error = -23
  883. [ 39.529846] POWER_VAL = 1
  884. [ 39.555664] EXT4-fs (dm-3): mounted filesystem without journal. Opts: (null)
  885. [ 39.590972] [BT] bluesleep_hostwake_task-hostwake -> 1Firmware version = wl0: Jan 17 2012 09:18:41 version 5.90.100.311 (CCX)
  886. [ 39.630340] Broadcom Dongle Host Driver: register interface [wlan0]dhdsdio_probe : the lock is released.
  887. [ 39.646057] EXT4-fs (dm-3): re-mounted. Opts: (null)
  888. [ 39.661468] EXT4-fs (dm-3): re-mounted. Opts: (null)
  889. [ 39.770202] EXT4-fs (dm-4): mounted filesystem without journal. Opts: (null)
  890. [ 39.823699]
  891. [ 39.823730] Dongle Host Driver, version 1.15.11
  892. [ 39.823730] Compiled in drivers/net/wireless/bcmdhd/src on Aug 19 2012 at 17:04:11
  893. [ 39.825927] CFGP2P-INFO2) wl_cfgp2p_supported : wl p2p error -23
  894. [ 39.855895] EXT4-fs (dm-4): re-mounted. Opts: (null)
  895. [ 39.879150] EXT4-fs (dm-4): re-mounted. Opts: (null)
  896. [ 39.893249] [BT] bluesleep_hostwake_task-hostwake -> 0
  897. [ 39.964965] EXT4-fs (dm-5): mounted filesystem without journal. Opts: (null)
  898. [ 40.056396] EXT4-fs (dm-5): re-mounted. Opts: (null)
  899. [ 40.068054] EXT4-fs (dm-5): re-mounted. Opts: (null)
  900. [ 40.113159] WLDEV-ERROR) wldev_set_country : wldev_set_country: set country for US as US rev 5
  901. [ 40.165954] EXT4-fs (dm-6): mounted filesystem without journal. Opts: (null)
  902. [ 40.525756] EXT4-fs (dm-6): re-mounted. Opts: (null)
  903. [ 40.536895] EXT4-fs (dm-6): re-mounted. Opts: (null)
  904. [ 40.647460] EXT4-fs (dm-7): mounted filesystem without journal. Opts: (null)
  905. [ 40.798095] EXT4-fs (dm-7): re-mounted. Opts: (null)
  906. [ 40.828247] EXT4-fs (dm-7): re-mounted. Opts: (null)
  907. [ 42.032104] usb: rndis_ethaddr_store MAC:02:00:0F:50:61:36
  908. [ 42.038452] usb: state_show buf=DISCONNECTED
  909. [ 42.039459] acc_open
  910. [ 42.039459] acc_release
  911. [ 42.640411] [VIBETONZ] enable_vibetonz_from_user : time = 0 msec
  912. [ 42.640747] [VIBETONZ] DISABLE
  913. [ 42.643463] [VIBETONZ] enable_vibetonz_from_user : time = 1 msec
  914. [ 42.644042] [VIBETONZ] ENABLE
  915. [ 42.651336] [VIBETONZ] DISABLE
  916. [ 42.656341] [VIBETONZ] enable_vibetonz_from_user : time = 0 msec
  917. [ 42.656768] [VIBETONZ] DISABLE
  918. [ 42.901824] [BT] going to sleep...
  919. [ 42.901947] [BT] hsuart_power ON set (0)
  920. [ 46.137390] [VIBETONZ] enable_vibetonz_from_user : time = 0 msec
  921. [ 46.137603] [VIBETONZ] DISABLE
  922. [ 46.662506] apr_tal:Q6 Is Up
  923. [ 46.698425] pil_qdsp6v3 pil_qdsp6v3: brought out of reset
  924. [ 48.056945] init: sys_prop: permission denied uid:1003 name:service.bootanim.exit
  925. [ 48.082031] set_freq_limit: 0x8 0, min 384000, max 1242000
  926. [ 48.264312] CPU1: Booted secondary processor
  927. [ 48.264923] set_freq_limit: 0x8 -1, min 384000, max 1512000
  928. [ 49.818267] mdnie [mdnie set] in scenario_store, input value = 0
  929. [ 49.818450] mdnie [mdnie set] mDNIe_Set_Mode
  930. [ 49.818542] mdnie cmap->len 256
  931. [ 49.818756] mdnie [mDNIe] mDNIe_Set_Mode : Current_mDNIe_mode (0)
  932. [ 49.819610] mdnie [mdnie set] in mode_store, input value = 1
  933. [ 49.820251] mdnie [mdnie set] in outdoor_store, input value = 0
  934. [ 49.822357] [ACC] k3dh_do_calibrate: cal data (0,0,0)
  935. [ 49.826324] [TouchKey] system calling LED Notification control
  936. [ 49.826812] write value 16 to address 32
  937. [ 50.602386] wlan0: no IPv6 routers present
  938. [ 50.672424] p2p0: no IPv6 routers present
  939. [ 51.932281] pil_modem pil_modem: brought out of reset
  940. [ 52.065734] Notify: smsm init
  941. [ 52.065917] _smem_log_init: no power log or log_idx allocated
  942. [ 52.117431] rpcrouter_smd_remote_notify: smd opened 0x (null)
  943. [ 52.120758] rmt_storage_get_ramfs: RAMFS entry: addr = 0x46100000, size = 0x00300000
  944. [ 52.120849] rmt_storage_get_ramfs: RAMFS entry: addr = 0x42e00000, size = 0x00002000
  945. [ 52.121368] rmt_storage_probe: Remote storage RPC client (0x300000a7)initialized
  946. [ 52.128997] rmt_storage_event_open_cb: open callback received
  947. [ 52.129089] open partition /boot/modem_fs1 handle=1
  948. [ 52.129699] rmt_storage_event_user_data_cb: send user data callback received
  949. [ 52.130523] rmt_storage_event_open_cb: open callback received
  950. [ 52.130706] open partition /boot/modem_fs2 handle=2
  951. [ 52.131225] rmt_storage_event_user_data_cb: send user data callback received
  952. [ 52.131805] rmt_storage_event_open_cb: open callback received
  953. [ 52.131927] open partition /boot/modem_fsg handle=3
  954. [ 52.132751] rmt_storage_event_user_data_cb: send user data callback received
  955. [ 52.133300] rmt_storage_event_alloc_rmt_buf_cb: Alloc rmt buf callback received
  956. [ 52.133941] rmt_storage_event_read_iovec_cb: read iovec callback received
  957. [ 52.143920] rmt_storage_ioctl: send status ioctl
  958. [ 52.144622] rmt_storage_event_read_iovec_cb: read iovec callback received
  959. [ 52.146362] rmt_storage_ioctl: send status ioctl
  960. [ 52.153686] rmt_storage_event_read_iovec_cb: read iovec callback received
  961. [ 52.242828] rmt_storage_ioctl: send status ioctl
  962. [ 53.943084] [TouchKey] system calling LED Notification control
  963. [ 53.943511] write value 32 to address 32
  964. [ 54.380279] [TouchKey] system calling LED Notification control
  965. [ 54.380706] write value 16 to address 32
  966. [ 54.403137] [TSP] t: 4, a: 0
  967. [ 54.528198] [TSP] t: 4, a: 0
  968. [ 54.552276] [TSP] t: 5, a: 0
  969. [ 54.576477] [TSP] t: 6, a: 0
  970. [ 54.600646] [TSP] t: 4, a: 0
  971. [ 54.624694] [TSP] t: 4, a: 0
  972. [ 54.648864] [TSP] t: 5, a: 0
  973. [ 54.672943] [TSP] t: 6, a: 0
  974. [ 54.697113] [TSP] t: 6, a: 0
  975. [ 54.721191] [TSP] t: 5, a: 0
  976. [ 54.721710] [TSP] calibration was good
  977. [ 54.723541] [TSP] Clearing unused slots
  978. [ 57.557220] [VIBETONZ] enable_vibetonz_from_user : time = 0 msec
  979. [ 57.557464] [VIBETONZ] DISABLE
  980. [ 57.558227] [VIBETONZ] enable_vibetonz_from_user : time = 10 msec
  981. [ 57.558410] [VIBETONZ] ENABLE
  982. [ 57.570922] [VIBETONZ] DISABLE
  983. [ 57.571624] [VIBETONZ] enable_vibetonz_from_user : time = 0 msec
  984. [ 57.571868] [VIBETONZ] DISABLE
  985. [ 58.295806] mdp4_overlay_mdp_perf_upd mdp bw is changed [1] from 4 to 1
  986. [ 59.265777] [TouchKey] interrupt touchkey
  987. [ 59.266174] [TKEY]touchkey press keycode:172
  988. [ 59.266845] [VIBETONZ] enable_vibetonz_from_user : time = 0 msec
  989. [ 59.266998] [VIBETONZ] DISABLE
  990. [ 59.267517] [VIBETONZ] enable_vibetonz_from_user : time = 10 msec
  991. [ 59.267547] [VIBETONZ] ENABLE
  992. [ 59.279815] [VIBETONZ] DISABLE
  993. [ 59.280456] [VIBETONZ] enable_vibetonz_from_user : time = 0 msec
  994. [ 59.280487] [VIBETONZ] DISABLE
  995. [ 59.379394] [TouchKey] interrupt touchkey
  996. [ 59.379913] [TKEY]touchkey release keycode:172
  997. [ 68.115234] [VIBETONZ] enable_vibetonz_from_user : time = 0 msec
  998. [ 68.115478] [VIBETONZ] DISABLE
  999. [ 69.138793] [VIBETONZ] enable_vibetonz_from_user : time = 0 msec
  1000. [ 69.139099] [VIBETONZ] DISABLE
  1001. [ 69.486267] [VIBETONZ] enable_vibetonz_from_user : time = 0 msec
  1002. [ 69.486389] [VIBETONZ] DISABLE
  1003. [ 71.114624] set_freq_limit: 0x8 0, min 384000, max 1242000
  1004. [ 72.664672] CPU1: Booted secondary processor
  1005. [ 72.665283] set_freq_limit: 0x8 -1, min 384000, max 1512000
  1006. [ 73.825256] [VIBETONZ] enable_vibetonz_from_user : time = 0 msec
  1007. [ 73.825317] [VIBETONZ] DISABLE
  1008. [ 74.341918] [VIBETONZ] enable_vibetonz_from_user : time = 0 msec
  1009. [ 74.342224] [VIBETONZ] DISABLE
  1010. [ 74.888916] [VIBETONZ] enable_vibetonz_from_user : time = 0 msec
  1011. [ 74.889709] [VIBETONZ] DISABLE
  1012. [ 75.364379] set_freq_limit: 0x8 0, min 384000, max 1242000
  1013. [ 75.417633] [VIBETONZ] enable_vibetonz_from_user : time = 0 msec
  1014. [ 75.417785] [VIBETONZ] DISABLE
  1015. [ 76.380004] [VIBETONZ] enable_vibetonz_from_user : time = 0 msec
  1016. [ 76.380157] [VIBETONZ] DISABLE
  1017. [ 78.248931] [VIBETONZ] enable_vibetonz_from_user : time = 0 msec
  1018. [ 78.249084] [VIBETONZ] DISABLE
  1019. [ 78.792358] [VIBETONZ] enable_vibetonz_from_user : time = 0 msec
  1020. [ 78.792663] [VIBETONZ] DISABLE
  1021. [ 79.584960] CPU1: Booted secondary processor
  1022. [ 79.585662] set_freq_limit: 0x8 -1, min 384000, max 1512000
  1023. [ 79.857452] EXT4-fs (dm-8): mounted filesystem without journal. Opts: (null)
  1024. [ 80.091094] EXT4-fs (dm-8): re-mounted. Opts: (null)
  1025. [ 80.111145] EXT4-fs (dm-8): re-mounted. Opts: (null)
  1026. [ 80.644226] EXT4-fs (dm-9): mounted filesystem without journal. Opts: (null)
  1027. [ 80.879058] EXT4-fs (dm-9): re-mounted. Opts: (null)
  1028. [ 80.901702] EXT4-fs (dm-9): re-mounted. Opts: (null)
  1029. [ 81.017822] EXT4-fs (dm-10): mounted filesystem without journal. Opts: (null)
  1030. [ 81.249053] EXT4-fs (dm-10): re-mounted. Opts: (null)
  1031. [ 81.277160] EXT4-fs (dm-10): re-mounted. Opts: (null)
  1032. [ 81.438232] EXT4-fs (dm-11): mounted filesystem without journal. Opts: (null)
  1033. [ 81.590850] EXT4-fs (dm-11): re-mounted. Opts: (null)
  1034. [ 81.604125] EXT4-fs (dm-11): re-mounted. Opts: (null)
  1035. [ 82.888702] apr_tal:Modem Is Up
  1036. [ 85.094329] [VIBETONZ] enable_vibetonz_from_user : time = 0 msec
  1037. [ 85.094604] [VIBETONZ] DISABLE
  1038. [ 85.096038] [VIBETONZ] enable_vibetonz_from_user : time = 10 msec
  1039. [ 85.096282] [VIBETONZ] ENABLE
  1040. [ 85.108703] [VIBETONZ] DISABLE
  1041. [ 85.109527] [VIBETONZ] enable_vibetonz_from_user : time = 0 msec
  1042. [ 85.109710] [VIBETONZ] DISABLE
  1043. [ 85.874511] [fg] p:7536, s1:80, s2:79, v:4081250, t:691
  1044. [ 93.190612] [VIBETONZ] enable_vibetonz_from_user : time = 0 msec
  1045. [ 93.190795] [VIBETONZ] DISABLE
  1046. [ 93.726531] [VIBETONZ] enable_vibetonz_from_user : time = 0 msec
  1047. [ 93.726562] [VIBETONZ] DISABLE
  1048. [ 96.097656] init: untracked pid 1327 exited
  1049. [ 102.357452] init: untracked pid 1777 exited
  1050. [ 103.898803] init: untracked pid 2284 exited
  1051. [ 103.929656] init: untracked pid 2288 exited
  1052. [ 104.064605] init: untracked pid 2474 exited
  1053. [ 104.117767] init: untracked pid 2771 exited
  1054. [ 104.149963] init: untracked pid 2780 exited
  1055. [ 104.155273] init: untracked pid 2776 exited
  1056. [ 104.155853] init: untracked pid 2174 exited
  1057. [ 104.210327] init: untracked pid 2549 exited
  1058. [ 104.210510] init: untracked pid 2236 exited
  1059. [ 104.212585] init: untracked pid 2150 exited
  1060. [ 104.226501] init: untracked pid 2260 exited
  1061. [ 104.226562] init: untracked pid 2369 exited
  1062. [ 104.231933] init: untracked pid 2184 exited
  1063. [ 104.245758] init: untracked pid 2573 exited
  1064. [ 104.251983] init: untracked pid 2603 exited
  1065. [ 104.278564] init: untracked pid 2501 exited
  1066. [ 104.285583] init: untracked pid 2393 exited
  1067. [ 104.294097] init: untracked pid 2686 exited
  1068. [ 104.297302] init: untracked pid 2698 exited
  1069. [ 104.307678] init: untracked pid 2305 exited
  1070. [ 104.771484] init: untracked pid 3106 exited
  1071. [ 104.781677] [TouchKey] interrupt touchkey
  1072. [ 104.782165] [TKEY]touchkey press keycode:139
  1073. [ 104.782775] [VIBETONZ] enable_vibetonz_from_user : time = 0 msec
  1074. [ 104.782989] [VIBETONZ] DISABLE
  1075. [ 104.783721] [VIBETONZ] enable_vibetonz_from_user : time = 10 msec
  1076. [ 104.783905] [VIBETONZ] ENABLE
  1077. [ 104.795745] [VIBETONZ] enable_vibetonz_from_user : time = 0 msec
  1078. [ 104.795867] [VIBETONZ] DISABLE
  1079. [ 104.915405] [TouchKey] interrupt touchkey
  1080. [ 104.915771] [TKEY]touchkey release keycode:139
  1081. [ 107.780090] [TouchKey] interrupt touchkey
  1082. [ 107.781066] [TKEY]touchkey press keycode:139
  1083. [ 107.782348] [VIBETONZ] enable_vibetonz_from_user : time = 0 msec
  1084. [ 107.783599] [VIBETONZ] DISABLE
  1085. [ 107.784759] [VIBETONZ] enable_vibetonz_from_user : time = 10 msec
  1086. [ 107.785064] [VIBETONZ] ENABLE
  1087. [ 107.798583] [VIBETONZ] DISABLE
  1088. [ 107.799926] [VIBETONZ] enable_vibetonz_from_user : time = 0 msec
  1089. [ 107.800445] [VIBETONZ] DISABLE
  1090. [ 107.841857] [TouchKey] interrupt touchkey
  1091. [ 107.842285] [TKEY]touchkey release keycode:139
  1092. [ 124.047607] [TouchKey] interrupt touchkey
  1093. [ 124.048095] [TKEY]touchkey press keycode:158
  1094. [ 124.048797] [VIBETONZ] enable_vibetonz_from_user : time = 0 msec
  1095. [ 124.049041] [VIBETONZ] DISABLE
  1096. [ 124.049743] [VIBETONZ] enable_vibetonz_from_user : time = 10 msec
  1097. [ 124.049957] [VIBETONZ] ENABLE
  1098. [ 124.062469] [VIBETONZ] DISABLE
  1099. [ 124.063018] [VIBETONZ] enable_vibetonz_from_user : time = 0 msec
  1100. [ 124.063201] [VIBETONZ] DISABLE
  1101. [ 124.156799] [TouchKey] interrupt touchkey
  1102. [ 124.157257] [TKEY]touchkey release keycode:158
  1103. [ 130.956115] rmt_storage_event_open_cb: open callback received
  1104. [ 130.956207] open partition /q6_fs1_parti_id_0x59 handle=4
  1105. [ 130.957580] rmt_storage_event_alloc_rmt_buf_cb: Alloc rmt buf callback received
  1106. [ 130.958435] sdio_al:ch SDIO_SMEM read_threshold=1, write_threshold=2560, min_write_avail=1024, max_rx_threshold=20480, max_tx_threshold=5120
  1107. [ 130.958923] sdio_al:sdio_open SDIO_SMEM completed OK
  1108. [ 130.960388] rmt_storage_event_user_data_cb: send user data callback received
  1109. [ 130.961425] rmt_storage_event_open_cb: open callback received
  1110. [ 130.961517] open partition /q6_fs2_parti_id_0x5A handle=5
  1111. [ 130.962799] rmt_storage_event_user_data_cb: send user data callback received
  1112. [ 130.963836] rmt_storage_event_open_cb: open callback received
  1113. [ 130.963989] open partition /q6_fsg_parti_id_0x5B handle=6
  1114. [ 130.965118] rmt_storage_event_user_data_cb: send user data callback received
  1115. [ 131.039642] rmt_storage_event_write_iovec_cb: write iovec callback received
  1116. [ 131.199981] rmt_storage_ioctl: send status ioctl
  1117. [ 134.859985] [TouchKey] interrupt touchkey
  1118. [ 134.860443] [TKEY]touchkey press keycode:158
  1119. [ 134.861083] [VIBETONZ] enable_vibetonz_from_user : time = 0 msec
  1120. [ 134.861206] [VIBETONZ] DISABLE
  1121. [ 134.861785] [VIBETONZ] enable_vibetonz_from_user : time = 10 msec
  1122. [ 134.861968] [VIBETONZ] ENABLE
  1123. [ 134.873687] [VIBETONZ] enable_vibetonz_from_user : time = 0 msec
  1124. [ 134.873870] [VIBETONZ] DISABLE
  1125. [ 134.973175] [TouchKey] interrupt touchkey
  1126. [ 134.973632] [TKEY]touchkey release keycode:158
  1127. [ 137.600036] [TouchKey] interrupt touchkey
  1128. [ 137.600433] [TKEY]touchkey press keycode:158
  1129. [ 137.600921] [VIBETONZ] enable_vibetonz_from_user : time = 0 msec
  1130. [ 137.600952] [VIBETONZ] DISABLE
  1131. [ 137.601501] [VIBETONZ] enable_vibetonz_from_user : time = 10 msec
  1132. [ 137.601531] [VIBETONZ] ENABLE
  1133. [ 137.613830] [VIBETONZ] DISABLE
  1134. [ 137.614501] [VIBETONZ] enable_vibetonz_from_user : time = 0 msec
  1135. [ 137.614501] [VIBETONZ] DISABLE
  1136. [ 137.667297] [TouchKey] interrupt touchkey
  1137. [ 137.667694] [TKEY]touchkey release keycode:158
  1138. [ 141.560852] [TouchKey] interrupt touchkey
  1139. [ 141.561614] [TKEY]touchkey press keycode:158
  1140. [ 141.563446] [VIBETONZ] enable_vibetonz_from_user : time = 0 msec
  1141. [ 141.563751] [VIBETONZ] DISABLE
  1142. [ 141.564819] [VIBETONZ] enable_vibetonz_from_user : time = 10 msec
  1143. [ 141.565307] [VIBETONZ] ENABLE
  1144. [ 141.578674] [VIBETONZ] DISABLE
  1145. [ 141.579864] [VIBETONZ] enable_vibetonz_from_user : time = 0 msec
  1146. [ 141.580383] [VIBETONZ] DISABLE
  1147. [ 141.661315] [TouchKey] interrupt touchkey
  1148. [ 141.661987] [TKEY]touchkey release keycode:158
  1149. [ 145.733917] set_freq_limit: 0x8 0, min 384000, max 1242000
  1150. [ 147.644531] CPU1: Booted secondary processor
  1151. [ 147.645233] set_freq_limit: 0x8 -1, min 384000, max 1512000
  1152. [ 148.194458] set_freq_limit: 0x8 0, min 384000, max 1242000
  1153. [ 148.855651] CPU1: Booted secondary processor
  1154. [ 148.856262] set_freq_limit: 0x8 -1, min 384000, max 1512000
  1155. [ 152.303405] set_freq_limit: 0x8 0, min 384000, max 1242000
  1156. [ 153.054687] CPU1: Booted secondary processor
  1157. [ 153.055541] set_freq_limit: 0x8 -1, min 384000, max 1512000
  1158. [ 157.353271] set_freq_limit: 0x8 0, min 384000, max 1242000
  1159. [ 159.219360] [TouchKey] interrupt touchkey
  1160. [ 159.219848] [TKEY]touchkey press keycode:158
  1161. [ 159.220520] [VIBETONZ] enable_vibetonz_from_user : time = 0 msec
  1162. [ 159.220733] [VIBETONZ] DISABLE
  1163. [ 159.221588] [VIBETONZ] enable_vibetonz_from_user : time = 10 msec
  1164. [ 159.221771] [VIBETONZ] ENABLE
  1165. [ 159.234588] [VIBETONZ] DISABLE
  1166. [ 159.235351] [VIBETONZ] enable_vibetonz_from_user : time = 0 msec
  1167. [ 159.235565] [VIBETONZ] DISABLE
  1168. [ 159.309448] [TouchKey] interrupt touchkey
  1169. [ 159.309936] [TKEY]touchkey release keycode:158
  1170. [ 163.924407] [TouchKey] interrupt touchkey
  1171. [ 163.924865] [TKEY]touchkey press keycode:158
  1172. [ 163.925567] [VIBETONZ] enable_vibetonz_from_user : time = 0 msec
  1173. [ 163.925781] [VIBETONZ] DISABLE
  1174. [ 163.926422] [VIBETONZ] enable_vibetonz_from_user : time = 10 msec
  1175. [ 163.926605] [VIBETONZ] ENABLE
  1176. [ 163.939025] [VIBETONZ] DISABLE
  1177. [ 163.939819] [VIBETONZ] enable_vibetonz_from_user : time = 0 msec
  1178. [ 163.940032] [VIBETONZ] DISABLE
  1179. [ 164.031250] [TouchKey] interrupt touchkey
  1180. [ 164.031738] [TKEY]touchkey release keycode:158
  1181. [ 165.694641] CPU1: Booted secondary processor
  1182. [ 165.695281] set_freq_limit: 0x8 -1, min 384000, max 1512000
  1183. [ 166.172180] [TouchKey] interrupt touchkey
  1184. [ 166.172668] [TKEY]touchkey press keycode:158
  1185. [ 166.173248] [VIBETONZ] enable_vibetonz_from_user : time = 0 msec
  1186. [ 166.173431] [VIBETONZ] DISABLE
  1187. [ 166.174041] [VIBETONZ] enable_vibetonz_from_user : time = 10 msec
  1188. [ 166.174194] [VIBETONZ] ENABLE
  1189. [ 166.186492] [VIBETONZ] DISABLE
  1190. [ 166.187011] [VIBETONZ] enable_vibetonz_from_user : time = 0 msec
  1191. [ 166.187530] [VIBETONZ] DISABLE
  1192. [ 166.293243] set_freq_limit: 0x8 0, min 384000, max 1242000
  1193. [ 166.300964] [TouchKey] interrupt touchkey
  1194. [ 166.301513] [TKEY]touchkey release keycode:158
  1195. [ 166.744537] CPU1: Booted secondary processor
  1196. [ 166.745208] set_freq_limit: 0x8 -1, min 384000, max 1512000
  1197. [ 167.843475] set_freq_limit: 0x8 0, min 384000, max 1242000
  1198. [ 168.844909] CPU1: Booted secondary processor
  1199. [ 168.845611] set_freq_limit: 0x8 -1, min 384000, max 1512000
  1200. [ 176.143218] set_freq_limit: 0x8 0, min 384000, max 1242000
  1201. [ 177.244995] CPU1: Booted secondary processor
  1202. [ 177.245727] set_freq_limit: 0x8 -1, min 384000, max 1512000
  1203. [ 177.856201] [TouchKey] interrupt touchkey
  1204. [ 177.856658] [TKEY]touchkey press keycode:158
  1205. [ 177.857482] [VIBETONZ] enable_vibetonz_from_user : time = 0 msec
  1206. [ 177.857543] [VIBETONZ] DISABLE
  1207. [ 177.858734] [VIBETONZ] enable_vibetonz_from_user : time = 10 msec
  1208. [ 177.858764] [VIBETONZ] ENABLE
  1209. [ 177.875823] [VIBETONZ] DISABLE
  1210. [ 177.876190] [VIBETONZ] enable_vibetonz_from_user : time = 0 msec
  1211. [ 177.876220] [VIBETONZ] DISABLE
  1212. [ 177.951629] [TouchKey] interrupt touchkey
  1213. [ 177.952026] [TKEY]touchkey release keycode:158
  1214. [ 178.243560] set_freq_limit: 0x8 0, min 384000, max 1242000
  1215. [ 179.944976] CPU1: Booted secondary processor
  1216. [ 179.945678] set_freq_limit: 0x8 -1, min 384000, max 1512000
  1217. [ 180.343536] set_freq_limit: 0x8 0, min 384000, max 1242000
  1218. [ 181.179687] [TouchKey] interrupt touchkey
  1219. [ 181.180175] [TKEY]touchkey press keycode:158
  1220. [ 181.180908] [VIBETONZ] enable_vibetonz_from_user : time = 0 msec
  1221. [ 181.181030] [VIBETONZ] DISABLE
  1222. [ 181.181732] [VIBETONZ] enable_vibetonz_from_user : time = 10 msec
  1223. [ 181.181854] [VIBETONZ] ENABLE
  1224. [ 181.193664] [VIBETONZ] enable_vibetonz_from_user : time = 0 msec
  1225. [ 181.193878] [VIBETONZ] DISABLE
  1226. [ 181.292541] [TouchKey] interrupt touchkey
  1227. [ 181.293029] [TKEY]touchkey release keycode:158
  1228. [ 182.244934] CPU1: Booted secondary processor
  1229. [ 182.245635] set_freq_limit: 0x8 -1, min 384000, max 1512000
  1230. [ 182.893463] set_freq_limit: 0x8 0, min 384000, max 1242000
  1231. [ 183.081726] [TouchKey] interrupt touchkey
  1232. [ 183.082305] [TKEY]touchkey press keycode:139
  1233. [ 183.083007] [VIBETONZ] enable_vibetonz_from_user : time = 0 msec
  1234. [ 183.083129] [VIBETONZ] DISABLE
  1235. [ 183.083862] [VIBETONZ] enable_vibetonz_from_user : time = 10 msec
  1236. [ 183.083953] [VIBETONZ] ENABLE
  1237. [ 183.096435] [VIBETONZ] DISABLE
  1238. [ 183.097229] [VIBETONZ] enable_vibetonz_from_user : time = 0 msec
  1239. [ 183.097320] [VIBETONZ] DISABLE
  1240. [ 183.178161] [TouchKey] interrupt touchkey
  1241. [ 183.178649] [TKEY]touchkey release keycode:139
  1242. [ 184.144927] CPU1: Booted secondary processor
  1243. [ 184.145599] set_freq_limit: 0x8 -1, min 384000, max 1512000
  1244. [ 185.736724] mdp4_overlay_mdp_perf_upd mdp bw is changed [0] from 1 to 4
  1245. [ 185.774414] mdp4_overlay_mdp_perf_upd mdp bw is changed [1] from 4 to 1
  1246. [ 186.074371] mdp4_overlay_iommu_map_buf: dropped, ndx=3 plane=0
  1247. [ 186.074554] mdp4_overlay_iommu_map_buf: dropped, ndx=4 plane=0
  1248. [ 186.374481] init: untracked pid 3734 exited
  1249. [ 192.504425] [VIBETONZ] enable_vibetonz_from_user : time = 0 msec
  1250. [ 192.504486] [VIBETONZ] DISABLE
  1251. [ 192.505859] [VIBETONZ] enable_vibetonz_from_user : time = 1 msec
  1252. [ 192.505889] [VIBETONZ] ENABLE
  1253. [ 192.509155] [VIBETONZ] DISABLE
  1254. [ 192.529418] [VIBETONZ] enable_vibetonz_from_user : time = 21 msec
  1255. [ 192.529449] [VIBETONZ] ENABLE
  1256. [ 192.552764] [VIBETONZ] DISABLE
  1257. [ 202.146118] [TouchKey] interrupt touchkey
  1258. [ 202.146636] [TKEY]touchkey press keycode:158
  1259. [ 202.147399] [VIBETONZ] enable_vibetonz_from_user : time = 0 msec
  1260. [ 202.147674] [VIBETONZ] DISABLE
  1261. [ 202.148468] [VIBETONZ] enable_vibetonz_from_user : time = 10 msec
  1262. [ 202.148712] [VIBETONZ] ENABLE
  1263. [ 202.161010] [VIBETONZ] enable_vibetonz_from_user : time = 0 msec
  1264. [ 202.161041] [VIBETONZ] DISABLE
  1265. [ 202.248779] [TouchKey] interrupt touchkey
  1266. [ 202.249298] [TKEY]touchkey release keycode:158
  1267. [ 203.727569] [TouchKey] interrupt touchkey
  1268. [ 203.727996] [TKEY]touchkey press keycode:158
  1269. [ 203.728637] [VIBETONZ] enable_vibetonz_from_user : time = 0 msec
  1270. [ 203.728668] [VIBETONZ] DISABLE
  1271. [ 203.729400] [VIBETONZ] enable_vibetonz_from_user : time = 10 msec
  1272. [ 203.729431] [VIBETONZ] ENABLE
  1273. [ 203.741699] [VIBETONZ] DISABLE
  1274. [ 203.742370] [VIBETONZ] enable_vibetonz_from_user : time = 0 msec
  1275. [ 203.742431] [VIBETONZ] DISABLE
  1276. [ 203.800292] [TouchKey] interrupt touchkey
  1277. [ 203.800659] [TKEY]touchkey release keycode:158
  1278. [ 205.421630] [VIBETONZ] enable_vibetonz_from_user : time = 0 msec
  1279. [ 205.421752] [VIBETONZ] DISABLE
  1280. [ 205.423309] [VIBETONZ] enable_vibetonz_from_user : time = 1 msec
  1281. [ 205.423400] [VIBETONZ] ENABLE
  1282. [ 205.426788] [VIBETONZ] DISABLE
  1283. [ 205.447021] [VIBETONZ] enable_vibetonz_from_user : time = 21 msec
  1284. [ 205.447143] [VIBETONZ] ENABLE
  1285. [ 205.470611] [VIBETONZ] DISABLE
  1286. [ 208.887207] [VIBETONZ] enable_vibetonz_from_user : time = 0 msec
  1287. [ 208.887359] [VIBETONZ] DISABLE
  1288. [ 209.525939] [VIBETONZ] enable_vibetonz_from_user : time = 0 msec
  1289. [ 209.526062] [VIBETONZ] DISABLE
  1290. [ 215.412933] [TouchKey] system calling LED Notification control
  1291. [ 215.413360] write value 32 to address 32
  1292. [ 216.299468] EXT4-fs (mmcblk0p24): re-mounted. Opts: user_xattr,acl,barrier=0,data=ordered
  1293. [ 216.443084] EXT4-fs (mmcblk0p24): re-mounted. Opts: user_xattr,acl,barrier=0,data=ordered
  1294. [ 216.504669] EXT4-fs (mmcblk0p24): re-mounted. Opts: user_xattr,acl,barrier=0,data=ordered
  1295. [ 225.503509] [TouchKey] system calling LED Notification control
  1296. [ 225.503997] write value 16 to address 32
  1297. [ 225.506011] [VIBETONZ] enable_vibetonz_from_user : time = 0 msec
  1298. [ 225.506195] [VIBETONZ] DISABLE
  1299. [ 226.672973] [VIBETONZ] enable_vibetonz_from_user : time = 0 msec
  1300. [ 226.673004] [VIBETONZ] DISABLE
  1301. [ 227.241149] [VIBETONZ] enable_vibetonz_from_user : time = 0 msec
  1302. [ 227.241333] [VIBETONZ] DISABLE
  1303. [ 228.566192] [VIBETONZ] enable_vibetonz_from_user : time = 0 msec
  1304. [ 228.566223] [VIBETONZ] DISABLE
  1305. [ 230.303894] genlock: _genlock_unlock: Trying to unlock an unlocked handle
  1306. [ 232.503295] [VIBETONZ] enable_vibetonz_from_user : time = 0 msec
  1307. [ 232.503326] [VIBETONZ] DISABLE
  1308. [ 233.562927] [VIBETONZ] enable_vibetonz_from_user : time = 0 msec
  1309. [ 233.562957] [VIBETONZ] DISABLE
  1310. [ 234.045654] [VIBETONZ] enable_vibetonz_from_user : time = 0 msec
  1311. [ 234.045684] [VIBETONZ] DISABLE
  1312. [ 234.091400] genlock: _genlock_unlock: Trying to unlock an unlocked handle
  1313. [ 237.805267] [TouchKey] interrupt touchkey
  1314. [ 237.805694] [TKEY]touchkey press keycode:158
  1315. [ 237.806152] [VIBETONZ] enable_vibetonz_from_user : time = 0 msec
  1316. [ 237.806182] [VIBETONZ] DISABLE
  1317. [ 237.806732] [VIBETONZ] enable_vibetonz_from_user : time = 10 msec
  1318. [ 237.806762] [VIBETONZ] ENABLE
  1319. [ 237.819061] [VIBETONZ] DISABLE
  1320. [ 237.819732] [VIBETONZ] enable_vibetonz_from_user : time = 0 msec
  1321. [ 237.819763] [VIBETONZ] DISABLE
  1322. [ 237.855834] [TouchKey] interrupt touchkey
  1323. [ 237.856201] [TKEY]touchkey release keycode:158
  1324. [ 238.154022] [VIBETONZ] enable_vibetonz_from_user : time = 0 msec
  1325. [ 238.154052] [VIBETONZ] DISABLE
  1326. [ 238.722869] EXT4-fs (mmcblk0p24): re-mounted. Opts: user_xattr,acl,barrier=0,data=ordered
  1327. [ 238.811065] EXT4-fs (mmcblk0p26): re-mounted. Opts: user_xattr,acl,barrier=1,data=ordered
  1328. [ 238.862030] EXT4-fs (mmcblk0p21): re-mounted. Opts: user_xattr,acl,barrier=1,data=ordered
  1329. [ 239.109039] EXT4-fs (mmcblk0p25): re-mounted. Opts: user_xattr,acl,barrier=1,data=ordered,noauto_da_alloc
  1330. [ 240.065093] EXT4-fs (mmcblk0p27): re-mounted. Opts: user_xattr,acl,barrier=1,data=ordered
  1331. [ 240.178314] EXT4-fs (dm-0): re-mounted. Opts: user_xattr,acl,barrier=1
  1332. [ 240.459350] EXT4-fs (dm-1): re-mounted. Opts: user_xattr,acl,barrier=1
  1333. [ 240.646636] EXT4-fs (dm-2): re-mounted. Opts: user_xattr,acl,barrier=1
  1334. [ 241.380126] EXT4-fs (dm-3): re-mounted. Opts: user_xattr,acl,barrier=1
  1335. [ 241.876922] EXT4-fs (dm-4): re-mounted. Opts: user_xattr,acl,barrier=1
  1336. [ 242.100128] EXT4-fs (dm-5): re-mounted. Opts: user_xattr,acl,barrier=1
  1337. [ 242.387481] EXT4-fs (dm-6): re-mounted. Opts: user_xattr,acl,barrier=1
  1338. [ 242.675445] EXT4-fs (dm-7): re-mounted. Opts: user_xattr,acl,barrier=1
  1339. [ 245.382568] EXT4-fs (dm-8): re-mounted. Opts: user_xattr,acl,barrier=1
  1340. [ 245.914642] EXT4-fs (dm-9): re-mounted. Opts: user_xattr,acl,barrier=1
  1341. [ 247.042480] EXT4-fs (dm-10): re-mounted. Opts: user_xattr,acl,barrier=1
  1342. [ 247.374206] EXT4-fs (dm-11): re-mounted. Opts: user_xattr,acl,barrier=1
  1343. [ 247.395874] init: untracked pid 4819 exited
  1344. [ 248.040740] [VIBETONZ] enable_vibetonz_from_user : time = 0 msec
  1345. [ 248.040954] [VIBETONZ] DISABLE
  1346. [ 248.052612] [VIBETONZ] enable_vibetonz_from_user : time = 1 msec
  1347. [ 248.052734] [VIBETONZ] ENABLE
  1348. [ 248.056213] [VIBETONZ] DISABLE
  1349. [ 248.076446] [VIBETONZ] enable_vibetonz_from_user : time = 21 msec
  1350. [ 248.076477] [VIBETONZ] ENABLE
  1351. [ 248.099761] [VIBETONZ] DISABLE
  1352. [ 250.967285] init: untracked pid 4822 exited
  1353. [ 253.493377] set_freq_limit: 0x8 0, min 384000, max 1242000
  1354. [ 254.044677] CPU1: Booted secondary processor
  1355. [ 254.045349] set_freq_limit: 0x8 -1, min 384000, max 1512000
  1356. [ 254.843139] set_freq_limit: 0x8 0, min 384000, max 1242000
  1357. [ 255.894927] CPU1: Booted secondary processor
  1358. [ 255.895568] set_freq_limit: 0x8 -1, min 384000, max 1512000
  1359. [ 256.672912] [VIBETONZ] enable_vibetonz_from_user : time = 0 msec
  1360. [ 256.673095] [VIBETONZ] DISABLE
  1361. [ 257.325531] [VIBETONZ] enable_vibetonz_from_user : time = 0 msec
  1362. [ 257.325653] [VIBETONZ] DISABLE
  1363. [ 264.518768] EXT4-fs (mmcblk0p24): re-mounted. Opts: user_xattr,acl,barrier=0,data=ordered
  1364. [ 264.741668] EXT4-fs (mmcblk0p24): re-mounted. Opts: user_xattr,acl,barrier=0,data=ordered
  1365. [ 265.515289] [VIBETONZ] enable_vibetonz_from_user : time = 0 msec
  1366. [ 265.515472] [VIBETONZ] DISABLE
  1367. [ 266.042236] [VIBETONZ] enable_vibetonz_from_user : time = 0 msec
  1368. [ 266.043273] [VIBETONZ] DISABLE
  1369. [ 272.449432] EXT4-fs (mmcblk0p24): re-mounted. Opts: user_xattr,acl,barrier=0,data=ordered
  1370. [ 272.669952] EXT4-fs (mmcblk0p24): re-mounted. Opts: user_xattr,acl,barrier=0,data=ordered
  1371. [ 273.601867] [VIBETONZ] enable_vibetonz_from_user : time = 0 msec
  1372. [ 273.602111] [VIBETONZ] DISABLE
  1373. [ 274.084411] [VIBETONZ] enable_vibetonz_from_user : time = 0 msec
  1374. [ 274.084472] [VIBETONZ] DISABLE
  1375. [ 282.391021] [TouchKey] interrupt touchkey
  1376. [ 282.391418] [TKEY]touchkey press keycode:158
  1377. [ 282.392272] [VIBETONZ] enable_vibetonz_from_user : time = 0 msec
  1378. [ 282.392364] [VIBETONZ] DISABLE
  1379. [ 282.393341] [VIBETONZ] enable_vibetonz_from_user : time = 10 msec
  1380. [ 282.393402] [VIBETONZ] ENABLE
  1381. [ 282.406707] [VIBETONZ] DISABLE
  1382. [ 282.407653] [VIBETONZ] enable_vibetonz_from_user : time = 0 msec
  1383. [ 282.407714] [VIBETONZ] DISABLE
  1384. [ 282.487915] [TouchKey] interrupt touchkey
  1385. [ 282.488555] [TKEY]touchkey release keycode:158
  1386. [ 284.343658] set_freq_limit: 0x8 0, min 384000, max 1242000
  1387. [ 284.544555] CPU1: Booted secondary processor
  1388. [ 284.545288] set_freq_limit: 0x8 -1, min 384000, max 1512000
  1389. [ 286.274688] [fg] p:7634, s1:81, s2:80, v:4098750, t:678
  1390. [ 286.943603] set_freq_limit: 0x8 0, min 384000, max 1242000
  1391. [ 287.395019] CPU1: Booted secondary processor
  1392. [ 287.395751] set_freq_limit: 0x8 -1, min 384000, max 1512000
  1393. [ 287.537902] EXT4-fs (mmcblk0p24): re-mounted. Opts: user_xattr,acl,barrier=0,data=ordered
  1394. [ 287.847137] EXT4-fs (mmcblk0p24): re-mounted. Opts: user_xattr,acl,barrier=0,data=ordered
  1395. [ 296.065490] EXT4-fs (mmcblk0p24): re-mounted. Opts: user_xattr,acl,barrier=0,data=ordered
  1396. [ 296.380859] EXT4-fs (mmcblk0p24): re-mounted. Opts: user_xattr,acl,barrier=0,data=ordered
  1397. [ 298.866088] EXT4-fs (mmcblk0p24): re-mounted. Opts: user_xattr,acl,barrier=0,data=ordered
  1398. [ 299.022064] EXT4-fs (mmcblk0p24): re-mounted. Opts: user_xattr,acl,barrier=0,data=ordered
  1399. [ 303.994171] set_freq_limit: 0x8 0, min 384000, max 1242000
  1400. [ 304.294647] CPU1: Booted secondary processor
  1401. [ 304.295318] set_freq_limit: 0x8 -1, min 384000, max 1512000
  1402. [ 304.550079] EXT4-fs (mmcblk0p24): re-mounted. Opts: user_xattr,acl,barrier=0,data=ordered
  1403. [ 304.976562] EXT4-fs (mmcblk0p24): re-mounted. Opts: user_xattr,acl,barrier=0,data=ordered
  1404. [ 311.215789] [TouchKey] interrupt touchkey
  1405. [ 311.216339] [TKEY]touchkey press keycode:158
  1406. [ 311.217071] [VIBETONZ] enable_vibetonz_from_user : time = 0 msec
  1407. [ 311.217285] [VIBETONZ] DISABLE
  1408. [ 311.217926] [VIBETONZ] enable_vibetonz_from_user : time = 10 msec
  1409. [ 311.218048] [VIBETONZ] ENABLE
  1410. [ 311.230651] [VIBETONZ] DISABLE
  1411. [ 311.231384] [VIBETONZ] enable_vibetonz_from_user : time = 0 msec
  1412. [ 311.231567] [VIBETONZ] DISABLE
  1413. [ 311.346343] [TouchKey] interrupt touchkey
  1414. [ 311.346801] [TKEY]touchkey release keycode:158
  1415. [ 312.798248] [VIBETONZ] enable_vibetonz_from_user : time = 0 msec
  1416. [ 312.798370] [VIBETONZ] DISABLE
  1417. [ 312.799621] [VIBETONZ] enable_vibetonz_from_user : time = 1 msec
  1418. [ 312.799804] [VIBETONZ] ENABLE
  1419. [ 312.803131] [VIBETONZ] DISABLE
  1420. [ 312.823394] [VIBETONZ] enable_vibetonz_from_user : time = 21 msec
  1421. [ 312.823425] [VIBETONZ] ENABLE
  1422. [ 312.846679] [VIBETONZ] DISABLE
  1423. [ 315.208465] [VIBETONZ] enable_vibetonz_from_user : time = 0 msec
  1424. [ 315.208679] [VIBETONZ] DISABLE
  1425. [ 315.426147] EXT4-fs (mmcblk0p24): re-mounted. Opts: user_xattr,acl,barrier=0,data=ordered
  1426. [ 315.711425] EXT4-fs (mmcblk0p24): re-mounted. Opts: user_xattr,acl,barrier=0,data=ordered
  1427. [ 315.888183] [VIBETONZ] enable_vibetonz_from_user : time = 0 msec
  1428. [ 315.888366] [VIBETONZ] DISABLE
  1429. [ 319.344177] [VIBETONZ] enable_vibetonz_from_user : time = 0 msec
  1430. [ 319.344207] [VIBETONZ] DISABLE
  1431. [ 320.037017] [VIBETONZ] enable_vibetonz_from_user : time = 0 msec
  1432. [ 320.037078] [VIBETONZ] DISABLE
  1433. [ 334.144134] set_freq_limit: 0x8 0, min 384000, max 1242000
  1434. [ 334.407775] [TouchKey] interrupt touchkey
  1435. [ 334.408264] [TKEY]touchkey press keycode:158
  1436. [ 334.408905] [VIBETONZ] enable_vibetonz_from_user : time = 0 msec
  1437. [ 334.409088] [VIBETONZ] DISABLE
  1438. [ 334.409912] [VIBETONZ] enable_vibetonz_from_user : time = 10 msec
  1439. [ 334.410125] [VIBETONZ] ENABLE
  1440. [ 334.422851] [VIBETONZ] DISABLE
  1441. [ 334.423614] [VIBETONZ] enable_vibetonz_from_user : time = 0 msec
  1442. [ 334.423797] [VIBETONZ] DISABLE
  1443. [ 334.496673] [TouchKey] interrupt touchkey
  1444. [ 334.497161] [TKEY]touchkey release keycode:158
  1445. [ 334.644561] CPU1: Booted secondary processor
  1446. [ 334.645263] set_freq_limit: 0x8 -1, min 384000, max 1512000
  1447. [ 336.245605] [TouchKey] interrupt touchkey
  1448. [ 336.246063] [TKEY]touchkey press keycode:158
  1449. [ 336.246734] [VIBETONZ] enable_vibetonz_from_user : time = 0 msec
  1450. [ 336.246917] [VIBETONZ] DISABLE
  1451. [ 336.247619] [VIBETONZ] enable_vibetonz_from_user : time = 10 msec
  1452. [ 336.247802] [VIBETONZ] ENABLE
  1453. [ 336.259826] [VIBETONZ] enable_vibetonz_from_user : time = 0 msec
  1454. [ 336.260040] [VIBETONZ] DISABLE
  1455. [ 336.352416] [TouchKey] interrupt touchkey
  1456. [ 336.353271] [TKEY]touchkey release keycode:158
  1457. [ 338.578643] [VIBETONZ] enable_vibetonz_from_user : time = 0 msec
  1458. [ 338.578826] [VIBETONZ] DISABLE
  1459. [ 338.585968] [VIBETONZ] enable_vibetonz_from_user : time = 1 msec
  1460. [ 338.586181] [VIBETONZ] ENABLE
  1461. [ 338.589691] [VIBETONZ] DISABLE
  1462. [ 338.609985] [VIBETONZ] enable_vibetonz_from_user : time = 21 msec
  1463. [ 338.610229] [VIBETONZ] ENABLE
  1464. [ 338.633575] [VIBETONZ] DISABLE
  1465. [ 341.938049] [VIBETONZ] enable_vibetonz_from_user : time = 0 msec
  1466. [ 341.938079] [VIBETONZ] DISABLE
  1467. [ 342.532806] [VIBETONZ] enable_vibetonz_from_user : time = 0 msec
  1468. [ 342.532836] [VIBETONZ] DISABLE
  1469. [ 343.030181] EXT4-fs (mmcblk0p24): re-mounted. Opts: user_xattr,acl,barrier=0,data=ordered
  1470. [ 343.163574] EXT4-fs (mmcblk0p24): re-mounted. Opts: user_xattr,acl,barrier=0,data=ordered
  1471. [ 343.180664] EXT4-fs (mmcblk0p24): re-mounted. Opts: user_xattr,acl,barrier=0,data=ordered
  1472. [ 343.405700] EXT4-fs (mmcblk0p24): re-mounted. Opts: user_xattr,acl,barrier=0,data=ordered
  1473. [ 345.659057] [VIBETONZ] enable_vibetonz_from_user : time = 0 msec
  1474. [ 345.659240] [VIBETONZ] DISABLE
  1475. [ 347.546905] [VIBETONZ] enable_vibetonz_from_user : time = 0 msec
  1476. [ 347.546936] [VIBETONZ] DISABLE
  1477. [ 352.392822] [TouchKey] system calling LED Notification control
  1478. [ 352.394012] write value 32 to address 32
  1479. [ 352.549011] [TouchKey] system calling LED Notification control
  1480. [ 352.549346] write value 16 to address 32
  1481. [ 364.043518] set_freq_limit: 0x8 0, min 384000, max 1242000
  1482. [ 364.344970] CPU1: Booted secondary processor
  1483. [ 364.345672] set_freq_limit: 0x8 -1, min 384000, max 1512000
  1484. [ 369.993041] set_freq_limit: 0x8 0, min 384000, max 1242000
  1485. [ 370.944946] CPU1: Booted secondary processor
  1486. [ 370.945617] set_freq_limit: 0x8 -1, min 384000, max 1512000
  1487. [ 371.049346] [TouchKey] system calling LED Notification control
  1488. [ 371.049865] write value 32 to address 32
  1489. [ 371.920959] [TouchKey] system calling LED Notification control
  1490. [ 371.921386] write value 16 to address 32
  1491. [ 371.923034] [VIBETONZ] enable_vibetonz_from_user : time = 0 msec
  1492. [ 371.923156] [VIBETONZ] DISABLE
  1493. [ 372.484344] [VIBETONZ] enable_vibetonz_from_user : time = 0 msec
  1494. [ 372.484375] [VIBETONZ] DISABLE
  1495. [ 372.515930] genlock: _genlock_unlock: Trying to unlock an unlocked handle
  1496. [ 372.793151] set_freq_limit: 0x8 0, min 384000, max 1242000
  1497. [ 374.494567] CPU1: Booted secondary processor
  1498. [ 374.495239] set_freq_limit: 0x8 -1, min 384000, max 1512000
  1499. [ 374.993103] set_freq_limit: 0x8 0, min 384000, max 1242000
  1500. [ 378.544525] CPU1: Booted secondary processor
  1501. [ 378.545196] set_freq_limit: 0x8 -1, min 384000, max 1512000
  1502. [ 380.993164] set_freq_limit: 0x8 0, min 384000, max 1242000
  1503. [ 381.753509] [TouchKey] interrupt touchkey
  1504. [ 381.754058] [TKEY]touchkey press keycode:139
  1505. [ 381.754699] [VIBETONZ] enable_vibetonz_from_user : time = 0 msec
  1506. [ 381.754821] [VIBETONZ] DISABLE
  1507. [ 381.755554] [VIBETONZ] enable_vibetonz_from_user : time = 10 msec
  1508. [ 381.755676] [VIBETONZ] ENABLE
  1509. [ 381.768127] [VIBETONZ] DISABLE
  1510. [ 381.768920] [VIBETONZ] enable_vibetonz_from_user : time = 0 msec
  1511. [ 381.769042] [VIBETONZ] DISABLE
  1512. [ 381.776580] [TouchKey] interrupt touchkey
  1513. [ 381.777069] [TKEY]touchkey release keycode:139
  1514. [ 383.194549] CPU1: Booted secondary processor
  1515. [ 383.195312] set_freq_limit: 0x8 -1, min 384000, max 1512000
  1516. [ 383.843505] set_freq_limit: 0x8 0, min 384000, max 1242000
  1517. [ 384.692626] [TouchKey] interrupt touchkey
  1518. [ 384.693115] [TKEY]touchkey press keycode:158
  1519. [ 384.694000] [VIBETONZ] enable_vibetonz_from_user : time = 0 msec
  1520. [ 384.694183] [VIBETONZ] DISABLE
  1521. [ 384.694915] [VIBETONZ] enable_vibetonz_from_user : time = 10 msec
  1522. [ 384.695098] [VIBETONZ] ENABLE
  1523. [ 384.707489] [VIBETONZ] DISABLE
  1524. [ 384.708343] [VIBETONZ] enable_vibetonz_from_user : time = 0 msec
  1525. [ 384.708526] [VIBETONZ] DISABLE
  1526. [ 384.798553] [TouchKey] interrupt touchkey
  1527. [ 384.799041] [TKEY]touchkey release keycode:158
  1528. [ 385.687835] [TouchKey] interrupt touchkey
  1529. [ 385.688293] [TKEY]touchkey press keycode:139
  1530. [ 385.689025] [VIBETONZ] enable_vibetonz_from_user : time = 0 msec
  1531. [ 385.689147] [VIBETONZ] DISABLE
  1532. [ 385.690093] [VIBETONZ] enable_vibetonz_from_user : time = 10 msec
  1533. [ 385.690277] [VIBETONZ] ENABLE
  1534. [ 385.702911] [VIBETONZ] DISABLE
  1535. [ 385.703674] [VIBETONZ] enable_vibetonz_from_user : time = 0 msec
  1536. [ 385.703857] [VIBETONZ] DISABLE
  1537. [ 385.793579] [TouchKey] interrupt touchkey
  1538. [ 385.794128] [TKEY]touchkey release keycode:139
  1539. [ 386.545043] CPU1: Booted secondary processor
  1540. [ 386.545776] set_freq_limit: 0x8 -1, min 384000, max 1512000
  1541. [ 387.193511] set_freq_limit: 0x8 0, min 384000, max 1242000
  1542. [ 388.764648] [TouchKey] interrupt touchkey
  1543. [ 388.765228] [TKEY]touchkey press keycode:158
  1544. [ 388.765869] [VIBETONZ] enable_vibetonz_from_user : time = 0 msec
  1545. [ 388.766052] [VIBETONZ] DISABLE
  1546. [ 388.766754] [VIBETONZ] enable_vibetonz_from_user : time = 10 msec
  1547. [ 388.766845] [VIBETONZ] ENABLE
  1548. [ 388.779510] [VIBETONZ] DISABLE
  1549. [ 388.780303] [VIBETONZ] enable_vibetonz_from_user : time = 0 msec
  1550. [ 388.780517] [VIBETONZ] DISABLE
  1551. [ 388.861236] [TouchKey] interrupt touchkey
  1552. [ 388.861633] [TKEY]touchkey release keycode:158
  1553. [ 389.370574] [TouchKey] interrupt touchkey
  1554. [ 389.371063] [TKEY]touchkey press keycode:158
  1555. [ 389.371704] [VIBETONZ] enable_vibetonz_from_user : time = 0 msec
  1556. [ 389.371917] [VIBETONZ] DISABLE
  1557. [ 389.372619] [VIBETONZ] enable_vibetonz_from_user : time = 10 msec
  1558. [ 389.372802] [VIBETONZ] ENABLE
  1559. [ 389.385253] [VIBETONZ] DISABLE
  1560. [ 389.386047] [VIBETONZ] enable_vibetonz_from_user : time = 0 msec
  1561. [ 389.386230] [VIBETONZ] DISABLE
  1562. [ 389.449371] [TouchKey] interrupt touchkey
  1563. [ 389.449768] [TKEY]touchkey release keycode:158
  1564. [ 389.545043] CPU1: Booted secondary processor
  1565. [ 389.545776] set_freq_limit: 0x8 -1, min 384000, max 1512000
  1566. [ 391.033630] [TouchKey] interrupt touchkey
  1567. [ 391.033996] [TKEY]touchkey press keycode:158
  1568. [ 391.034545] [VIBETONZ] enable_vibetonz_from_user : time = 0 msec
  1569. [ 391.034576] [VIBETONZ] DISABLE
  1570. [ 391.036102] [VIBETONZ] enable_vibetonz_from_user : time = 10 msec
  1571. [ 391.036254] [VIBETONZ] ENABLE
  1572. [ 391.048675] [VIBETONZ] DISABLE
  1573. [ 391.049072] [VIBETONZ] enable_vibetonz_from_user : time = 0 msec
  1574. [ 391.049255] [VIBETONZ] DISABLE
  1575. [ 391.129760] [TouchKey] interrupt touchkey
  1576. [ 391.130218] [TKEY]touchkey release keycode:158
  1577. [ 391.843505] set_freq_limit: 0x8 0, min 384000, max 1242000
  1578. [ 392.745635] CPU1: Booted secondary processor
  1579. [ 392.746368] set_freq_limit: 0x8 -1, min 384000, max 1512000
  1580. [ 393.443328] set_freq_limit: 0x8 0, min 384000, max 1242000
  1581. [ 394.094573] CPU1: Booted secondary processor
  1582. [ 394.095245] set_freq_limit: 0x8 -1, min 384000, max 1512000
  1583. [ 394.691619] [VIBETONZ] enable_vibetonz_from_user : time = 0 msec
  1584. [ 394.691802] [VIBETONZ] DISABLE
  1585. [ 395.362579] [VIBETONZ] enable_vibetonz_from_user : time = 0 msec
  1586. [ 395.362609] [VIBETONZ] DISABLE
  1587. [ 395.394592] genlock: _genlock_unlock: Trying to unlock an unlocked handle
  1588. [ 395.593170] set_freq_limit: 0x8 0, min 384000, max 1242000
  1589. [ 396.734313] genlock: _genlock_unlock: Trying to unlock an unlocked handle
  1590. [ 398.194549] CPU1: Booted secondary processor
  1591. [ 398.195220] set_freq_limit: 0x8 -1, min 384000, max 1512000
  1592. [ 405.362365] [TouchKey] system calling LED Notification control
  1593. [ 405.362823] write value 32 to address 32
  1594. [ 408.659515] [TouchKey] system calling LED Notification control
  1595. [ 408.660003] write value 16 to address 32
  1596. [ 408.661102] [VIBETONZ] enable_vibetonz_from_user : time = 0 msec
  1597. [ 408.661315] [VIBETONZ] DISABLE
  1598. [ 410.228424] [VIBETONZ] enable_vibetonz_from_user : time = 0 msec
  1599. [ 410.228454] [VIBETONZ] DISABLE
  1600. [ 410.276397] genlock: _genlock_unlock: Trying to unlock an unlocked handle
  1601. [ 411.164489] genlock: _genlock_unlock: Trying to unlock an unlocked handle
  1602. [ 415.629943] [TouchKey] interrupt touchkey
  1603. [ 415.630310] [TKEY]touchkey press keycode:158
  1604. [ 415.630828] [VIBETONZ] enable_vibetonz_from_user : time = 0 msec
  1605. [ 415.630859] [VIBETONZ] DISABLE
  1606. [ 415.631622] [VIBETONZ] enable_vibetonz_from_user : time = 10 msec
  1607. [ 415.631652] [VIBETONZ] ENABLE
  1608. [ 415.644012] [VIBETONZ] DISABLE
  1609. [ 415.644683] [VIBETONZ] enable_vibetonz_from_user : time = 0 msec
  1610. [ 415.644714] [VIBETONZ] DISABLE
  1611. [ 415.735137] [TouchKey] interrupt touchkey
  1612. [ 415.735534] [TKEY]touchkey release keycode:158
  1613. [ 416.843353] set_freq_limit: 0x8 0, min 384000, max 1242000
  1614. [ 417.244995] CPU1: Booted secondary processor
  1615. [ 417.245788] set_freq_limit: 0x8 -1, min 384000, max 1512000
  1616. [ 417.368316] [TouchKey] interrupt touchkey
  1617. [ 417.368713] [TKEY]touchkey press keycode:158
  1618. [ 417.369384] [VIBETONZ] enable_vibetonz_from_user : time = 0 msec
  1619. [ 417.369445] [VIBETONZ] DISABLE
  1620. [ 417.370056] [VIBETONZ] enable_vibetonz_from_user : time = 10 msec
  1621. [ 417.370086] [VIBETONZ] ENABLE
  1622. [ 417.383239] [VIBETONZ] DISABLE
  1623. [ 417.383850] [VIBETONZ] enable_vibetonz_from_user : time = 0 msec
  1624. [ 417.383880] [VIBETONZ] DISABLE
  1625. [ 417.451477] [TouchKey] interrupt touchkey
  1626. [ 417.451965] [TKEY]touchkey release keycode:158
  1627. [ 417.943206] set_freq_limit: 0x8 0, min 384000, max 1242000
  1628. [ 419.744934] CPU1: Booted secondary processor
  1629. [ 419.745605] set_freq_limit: 0x8 -1, min 384000, max 1512000
  1630. [ 420.493194] set_freq_limit: 0x8 0, min 384000, max 1242000
  1631. [ 420.994720] CPU1: Booted secondary processor
  1632. [ 420.995391] set_freq_limit: 0x8 -1, min 384000, max 1512000
  1633. [ 421.443176] set_freq_limit: 0x8 0, min 384000, max 1242000
  1634. [ 421.844635] CPU1: Booted secondary processor
  1635. [ 421.845367] set_freq_limit: 0x8 -1, min 384000, max 1512000
  1636. [ 422.064422] EXT4-fs (mmcblk0p24): re-mounted. Opts: user_xattr,acl,barrier=0,data=ordered
  1637. [ 422.371002] EXT4-fs (mmcblk0p24): re-mounted. Opts: user_xattr,acl,barrier=0,data=ordered
  1638. [ 423.091674] [VIBETONZ] enable_vibetonz_from_user : time = 0 msec
  1639. [ 423.091705] [VIBETONZ] DISABLE
  1640. [ 423.759185] [VIBETONZ] enable_vibetonz_from_user : time = 0 msec
  1641. [ 423.759216] [VIBETONZ] DISABLE
  1642. [ 428.207519] [TouchKey] interrupt touchkey
  1643. [ 428.207885] [TKEY]touchkey press keycode:158
  1644. [ 428.208404] [VIBETONZ] enable_vibetonz_from_user : time = 0 msec
  1645. [ 428.208435] [VIBETONZ] DISABLE
  1646. [ 428.209716] [VIBETONZ] enable_vibetonz_from_user : time = 10 msec
  1647. [ 428.209747] [VIBETONZ] ENABLE
  1648. [ 428.221130] [VIBETONZ] enable_vibetonz_from_user : time = 0 msec
  1649. [ 428.221649] [VIBETONZ] DISABLE
  1650. [ 428.222625] [VIBETONZ] DISABLE
  1651. [ 428.357971] [TouchKey] interrupt touchkey
  1652. [ 428.358489] [TKEY]touchkey release keycode:158
  1653. [ 429.193328] set_freq_limit: 0x8 0, min 384000, max 1242000
  1654. [ 429.800018] [TouchKey] interrupt touchkey
  1655. [ 429.800506] [TKEY]touchkey press keycode:158
  1656. [ 429.801147] [VIBETONZ] enable_vibetonz_from_user : time = 0 msec
  1657. [ 429.801361] [VIBETONZ] DISABLE
  1658. [ 429.802001] [VIBETONZ] enable_vibetonz_from_user : time = 10 msec
  1659. [ 429.802185] [VIBETONZ] ENABLE
  1660. [ 429.814666] [VIBETONZ] DISABLE
  1661. [ 429.815429] [VIBETONZ] enable_vibetonz_from_user : time = 0 msec
  1662. [ 429.815612] [VIBETONZ] DISABLE
  1663. [ 429.922210] [TouchKey] interrupt touchkey
  1664. [ 429.922760] [TKEY]touchkey release keycode:158
  1665. [ 430.794647] CPU1: Booted secondary processor
  1666. [ 430.795288] set_freq_limit: 0x8 -1, min 384000, max 1512000
  1667. [ 432.743133] set_freq_limit: 0x8 0, min 384000, max 1242000
  1668. [ 433.244903] CPU1: Booted secondary processor
  1669. [ 433.245574] set_freq_limit: 0x8 -1, min 384000, max 1512000
  1670. [ 434.293579] set_freq_limit: 0x8 0, min 384000, max 1242000
  1671. [ 434.694946] CPU1: Booted secondary processor
  1672. [ 434.695739] set_freq_limit: 0x8 -1, min 384000, max 1512000
  1673. [ 435.993194] set_freq_limit: 0x8 0, min 384000, max 1242000
  1674. [ 436.294555] CPU1: Booted secondary processor
  1675. [ 436.295288] set_freq_limit: 0x8 -1, min 384000, max 1512000
  1676. [ 437.279266] init: untracked pid 10216 exited
  1677. [ 438.443603] set_freq_limit: 0x8 0, min 384000, max 1242000
  1678. [ 438.694946] CPU1: Booted secondary processor
  1679. [ 438.695648] set_freq_limit: 0x8 -1, min 384000, max 1512000
  1680. [ 440.393585] set_freq_limit: 0x8 0, min 384000, max 1242000
  1681.  
  1682. 1135 Corrected bytes, 0 unrecoverable blocks
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!