SHARE
TWEET

Untitled

a guest Oct 10th, 2019 70 Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. CoreELEC:~ # dmesg
  2. [    0.000000@0] Booting Linux on physical CPU 0x0
  3. [    0.000000@0] Linux version 4.9.190 (ais@NETHDD) (gcc version 8.3.0 (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36)) ) #1 SMP PREEMPT Mon Sep 30 01:43:45 MSK 2019
  4. [    0.000000@0] Boot CPU: AArch64 Processor [410fd034]
  5. [    0.000000@0] Machine model: Amlogic S905X2
  6. [    0.000000@0] efi: Getting EFI parameters from FDT:
  7. [    0.000000@0] efi: UEFI not found.
  8. [    0.000000@0] OF: reserved mem: __reserved_mem_alloc_size, start:0x0000000077800000, end:0x0000000078000000, len:8 MiB
  9. [    0.000000@0] Reserved memory: created CMA memory pool at 0x0000000077800000, size 8 MiB
  10. [    0.000000@0] OF: reserved mem: initialized node linux,meson-fb, compatible id shared-dma-pool
  11. [    0.000000@0] Reserved memory: created CMA memory pool at 0x0000000098000000, size 128 MiB
  12. [    0.000000@0] OF: reserved mem: initialized node linux,ion-dev, compatible id shared-dma-pool
  13. [    0.000000@0] Reserved memory: created CMA memory pool at 0x0000000095800000, size 40 MiB
  14. [    0.000000@0] OF: reserved mem: initialized node linux,di_cma, compatible id shared-dma-pool
  15. [    0.000000@0] Reserved memory: created DMA memory pool at 0x0000000095800000, size 0 MiB
  16. [    0.000000@0] OF: reserved mem: initialized node linux,ppmgr, compatible id shared-dma-pool
  17. [    0.000000@0] Reserved memory: created CMA memory pool at 0x0000000082400000, size 308 MiB
  18. [    0.000000@0] OF: reserved mem: initialized node linux,codec_mm_cma, compatible id shared-dma-pool
  19. [    0.000000@0] OF: reserved mem: initialized node linux,codec_mm_reserved, compatible id amlogic, codec-mm-reserved
  20. [    0.000000@0] OF: reserved mem: __reserved_mem_alloc_size, start:0x0000000005000000, end:0x0000000005400000, len:4 MiB
  21. [    0.000000@0] Reserved memory: created CMA memory pool at 0x0000000005000000, size 4 MiB
  22. [    0.000000@0] OF: reserved mem: initialized node linux,secmon, compatible id shared-dma-pool
  23. [    0.000000@0] cma: Reserved 8 MiB at 0x0000000081c00000
  24. [    0.000000@0] On node 0 totalpages: 655360
  25. [    0.000000@0]   DMA zone: 10240 pages used for memmap
  26. [    0.000000@0]   DMA zone: 0 pages reserved
  27. [    0.000000@0]   DMA zone: 655360 pages, LIFO batch:31
  28. [    0.000000@0] psci: probing for conduit method from DT.
  29. [    0.000000@0] psci: PSCIv1.0 detected in firmware.
  30. [    0.000000@0] psci: Using standard PSCI v0.2 function IDs
  31. [    0.000000@0] psci: MIGRATE_INFO_TYPE not supported.
  32. [    0.000000@0] psci: SMC Calling Convention v1.1
  33. [    0.000000@0] percpu: Embedded 22 pages/cpu s51992 r8192 d29928 u90112
  34. [    0.000000@0] pcpu-alloc: s51992 r8192 d29928 u90112 alloc=22*4096
  35. [    0.000000@0] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
  36. [    0.000000@0] Detected VIPT I-cache on CPU0
  37. [    0.000000@0] CPU features: enabling workaround for ARM erratum 845719
  38. [    0.000000@0] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 645120
  39. [    0.000000@0] Kernel command line: init=/init console=ttyS0,115200 no_console_suspend earlyprintk=aml-uart,0xff803000 ramoops.pstore_en=1 ramoops.record_size=0x8000 ramoops.console_size=0x4000 rootfstype=ramfs reboot_mode_android=normal logo=osd0,loaded,0x3d800000 vout=1080p60hz,enable panel_type=lcd_1 hdmitx=,444,8bit hdmimode=1080p60hz frac_rate_policy=1 hdmi_read_edid=1 cvbsmode=576cvbs osd_reverse=0 video_reverse=0 irq_check_en=0 androidboot.selinux=permissive androidboot.firstboot=0 jtag=disable androidboot.hardware=amlogic androidboot.rpmb_state=0 BOOT_IMAGE=kernel.img boot=LABEL=COREELEC disk=LABEL=STORAGE console=ttyS0,115200 console=tty0 no_console_suspend   enable_wol=1 hdmitx=cec3f     hdmimode=1080p60hz logo=osd0,loaded,0x3d800000 quiet console=tty0 systemd.show_status=auto
  40. [    0.000000@0] fb: osd0
  41. [    0.000000@0] fb: loaded
  42. [    0.000000@0] fb: 0x3d800000
  43. [    0.000000@0] lcd: panel_type: lcd_1
  44. [    0.000000@0] vout: get hdmimode: 1080p60hz
  45. [    0.000000@0] hdmitx: hdmitx boot frac_rate_policy: 1
  46. [    0.000000@0] vout: get cvbsmode: 576cvbs
  47. [    0.000000@0] vpp_axis_reverse: bootargs is 0
  48. [    0.000000@0] DI: di_read_canvas_reverse: bootargs is 0.
  49. [    0.000000@0] phlock_phase_config: bootargs is 0.
  50. [    0.000000@0] hdmitx: hdmitx: android device found, setting cec mode to:0x3f
  51. [    0.000000@0] hdmitx: HDMI hdmi_cec_func_config:0x3f
  52. [    0.000000@0] vout: get hdmimode: 1080p60hz
  53. [    0.000000@0] fb: osd0
  54. [    0.000000@0] fb: loaded
  55. [    0.000000@0] fb: 0x3d800000
  56. [    0.000000@0] PID hash table entries: 4096 (order: 3, 32768 bytes)
  57. [    0.000000@0] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
  58. [    0.000000@0] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
  59. [    0.000000@0] Memory: 2031956K/2621440K available (11516K kernel code, 1648K rwdata, 9188K rodata, 4800K init, 1696K bss, 81580K reserved, 507904K cma-reserved)
  60. [    0.000000@0] Virtual kernel memory layout:
  61. [    0.000000@0]     modules : 0xffffff8000000000 - 0xffffff8008000000   (   128 MB)
  62. [    0.000000@0]     vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000   (   250 GB)
  63. [    0.000000@0]       .text : 0xffffff8009080000 - 0xffffff8009bc0000   ( 11520 KB)
  64. [    0.000000@0]     .rodata : 0xffffff8009bc0000 - 0xffffff800a4c0000   (  9216 KB)
  65. [    0.000000@0]       .init : 0xffffff800a4c0000 - 0xffffff800a970000   (  4800 KB)
  66. [    0.000000@0]       .data : 0xffffff800a970000 - 0xffffff800ab0c200   (  1649 KB)
  67. [    0.000000@0]        .bss : 0xffffff800ab0c200 - 0xffffff800acb437c   (  1697 KB)
  68. [    0.000000@0]     fixed   : 0xffffffbefe7fd000 - 0xffffffbefec00000   (  4108 KB)
  69. [    0.000000@0]     PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000   (    16 MB)
  70. [    0.000000@0]     vmemmap : 0xffffffbf00000000 - 0xffffffc000000000   (     4 GB maximum)
  71. [    0.000000@0]               0xffffffbf00000000 - 0xffffffbf02800000   (    40 MB actual)
  72. [    0.000000@0]     memory  : 0xffffffc000000000 - 0xffffffc0a0000000   (  2560 MB)
  73. [    0.000000@0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  74. [    0.000000@0] Preemptible hierarchical RCU implementation.
  75. [    0.000000@0]        Build-time adjustment of leaf fanout to 64.
  76. [    0.000000@0]        RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
  77. [    0.000000@0] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
  78. [    0.000000@0] NR_IRQS:64 nr_irqs:64 0
  79. [    0.000000@0] irq_meson_gpio: 100 to 8 gpio interrupt mux initialized
  80. [    0.000000@0] g12a_aoclkc_init: register ao clk ok!
  81. [    0.000000@0] Meson chip version = RevB (28:B - 40:0)
  82. [    0.000000@0] meson_g12a_sdemmc_init: register amlogic sdemmc clk
  83. [    0.000000@0] meson_g12a_sdemmc_init: register amlogic sdemmc clk
  84. [    0.000000@0] meson_g12a_gpu_init: register meson gpu clk
  85. [    0.000000@0] meson_g12a_media_init: register meson media clk
  86. [    0.000000@0] meson_g12a_misc_init: register amlogic g12a misc clks
  87. [    0.000000@0] meson_g12a_misc_init: done.
  88. [    0.000000@0] g12a_clkc_init initialization complete
  89. [    0.000000@0] arm_arch_timer: Architected cp15 timer(s) running at 24.00MHz (phys).
  90. [    0.000000@0] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
  91. [    0.000005@0] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
  92. [    0.000031@0] meson_bc_timer: mclk->mux_reg =ffffff800800c190,mclk->reg =ffffff800800e194
  93. [    0.000547@0] Console: colour dummy device 80x25
  94. [    0.000560@0] console [tty0] enabled
  95. [    0.000574@0] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
  96. [    0.000582@0] pid_max: default: 32768 minimum: 301
  97. [    0.000684@0] Security Framework initialized
  98. [    0.000692@0] SELinux:  Initializing.
  99. [    0.000737@0] SELinux:  Starting in permissive mode
  100. [    0.000773@0] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
  101. [    0.000780@0] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
  102. [    0.001461@0] ftrace: allocating 38032 entries in 149 pages
  103. [    0.086849@0] sched-energy: CPU device node has no sched-energy-costs
  104. [    0.086858@0] CPU0: update cpu_capacity 1024
  105. [    0.086870@0] ASID allocator initialised with 65536 entries
  106. [    0.118669@0] EFI services will not be available.
  107. [    0.166816@1] Detected VIPT I-cache on CPU1
  108. [    0.166865@1] CPU1: update cpu_capacity 1024
  109. [    0.166868@1] CPU1: Booted secondary processor [410fd034]
  110. [    0.198858@2] Detected VIPT I-cache on CPU2
  111. [    0.198890@2] CPU2: update cpu_capacity 1024
  112. [    0.198893@2] CPU2: Booted secondary processor [410fd034]
  113. [    0.230934@3] Detected VIPT I-cache on CPU3
  114. [    0.230962@3] CPU3: update cpu_capacity 1024
  115. [    0.230966@3] CPU3: Booted secondary processor [410fd034]
  116. [    0.231034@0] Brought up 4 CPUs
  117. [    0.231037@0] SMP: Total of 4 processors activated.
  118. [    0.231042@0] CPU features: detected feature: 32-bit EL0 Support
  119. [    0.231126@0] CPU: All CPU(s) started at EL2
  120. [    0.231147@0] alternatives: patching kernel code
  121. [    0.232184@0] devtmpfs: initialized
  122. [    0.253124@0] DMI not present or invalid.
  123. [    0.253417@0] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  124. [    0.253429@0] futex hash table entries: 1024 (order: 4, 65536 bytes)
  125. [    0.264933@0] pinctrl core: initialized pinctrl subsystem
  126. [    0.265966@0] NET: Registered protocol family 16
  127. [    0.268443@0] schedtune: init normalization constants...
  128. [    0.268447@0] schedtune: no energy model data
  129. [    0.268448@0] schedtune: disabled!
  130. [    0.283103@0] cpuidle: using governor menu
  131. [    0.283186@0] register canvas platform driver
  132. [    0.283216@0] register rdma platform driver
  133. [    0.283247@0] aml_vdac_init: module init
  134. [    0.285687@0] vdso: 2 pages (1 code @ ffffff8009bc7000, 1 data @ ffffff800a975000)
  135. [    0.285701@0] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  136. [    0.286669@0] DMA: preallocated 2048 KiB pool for atomic allocations
  137. [    0.286819@0] clkmsr: clkmsr: driver init
  138. [    0.286821@0] codec_mm_module_init
  139. [    0.286871@0] media_configs_system_init
  140. [    0.288715@0] aml_iomap: amlogic iomap probe done
  141. [    0.289116@0] vpu: driver version: v20190329(7-g12a)
  142. [    0.289123@0] vpu: load vpu_clk: 666666667Hz(7)
  143. [    0.289319@0] vpu: clktree_init
  144. [    0.289367@0] vpu: vpu_probe OK
  145. [    0.293079@0] clkmsr: msr_clk_reg0=ffffff8008238004,msr_clk_reg2=ffffff800823a00c
  146. [    0.293088@0] clkmsr: msr_ring_reg0=ffffff800823c5fc
  147. [    0.296450@0] aml_vdac_probe:probe start.cpu_id:6,name:meson-g12ab-vdac
  148. [    0.296626@0] aml_vdac_probe: ok
  149. [    0.296751@0] canvas_probe reg=00000000ff638000,size=2000
  150. [    0.296768@0] canvas maped reg_base =ffffff8008268000
  151. [    0.302885@0] rdma_probe,cpu_type:1, ver:0, len:8
  152. [    0.303130@0] rdma_register, rdma_table_addr ffffff8008277000 rdma_table_addr_phy 81e00000 reg_buf ffffffc07dd38000
  153. [    0.303135@0] rdma_register success, handle 1 table_size 32768
  154. [    0.303137@0] set_rdma_handle video rdma handle = 1.
  155. [    0.303937@0] aml_snd_reg_map[0], reg:ff640000, size:2000
  156. [    0.303947@0] aml_snd_reg_map[1], reg:ff642000, size:2000
  157. [    0.303959@0] aml_snd_reg_map[2], reg:ff64a000, size:2000
  158. [    0.303969@0] aml_snd_reg_map[3], reg:ff642800, size:1800
  159. [    0.303983@0] aml_snd_reg_map[4], reg:ffd01000, size:1000
  160. [    0.303986@0] amlogic auge_snd_iomap probe done
  161. [    0.305300@0] cvbs_out: cvbsout_probe, cpu_id:4,name:meson-g12a-cvbsout
  162. [    0.305313@0] cvbs_out: clk path:0
  163. [    0.305317@0] cvbs_out: error: failed to get vdac_config
  164. [    0.305485@0] vout: vout1: register server: cvbs_vout_server
  165. [    0.305487@0] cvbs_out: register cvbs module server ok
  166. [    0.305491@0] vout: vout2: register server: cvbs_vout2_server
  167. [    0.305495@0] cvbs_out: register cvbs module vout2 server ok
  168. [    0.305501@0] cvbs_out: chrdev devno 264241152 for disp
  169. [    0.305699@0] cvbs_out: create cdev cvbs
  170. [    0.305702@0] cvbs_out: cvbsout_probe OK
  171. [    0.306174@0] codec_mm codec_mm: assigned reserved memory node linux,codec_mm_cma
  172. [    0.306238@0] codec_mm codec_mm: assigned reserved memory node linux,codec_mm_cma
  173. [    0.306239@0] codec_mm_probe ok
  174. [    0.485365@3] SCSI subsystem initialized
  175. [    0.485587@3] usbcore: registered new interface driver usbfs
  176. [    0.485632@3] usbcore: registered new interface driver hub
  177. [    0.485719@3] usbcore: registered new device driver usb
  178. [    0.485851@3] pps_core: LinuxPPS API ver. 1 registered
  179. [    0.485854@3] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  180. [    0.485879@3] PTP clock support registered
  181. [    0.486032@3] dmi: Firmware registration failed.
  182. [    0.486332@3] secmon: reserve_mem_size:0x300000
  183. [    0.486430@3] secmon secmon: assigned reserved memory node linux,secmon
  184. [    0.486433@3] secmon: can't fine clear_range
  185. [    0.486628@3] secmon: get page:ffffffbf00140000, 5000
  186. [    0.486634@3] secmon: share in base: 0xffffffc0050fe000, share out base: 0xffffffc0050ff000
  187. [    0.486636@3] secmon: phy_in_base: 0x50fe000, phy_out_base: 0x50ff000
  188. [    0.487445@3] hdmitx: system: amhdmitx_probe start
  189. [    0.487448@3] hdmitx: system: Ver: 20181019
  190. [    0.487481@3] hdmitx: system: hdmitx_device.chip_type : 10
  191. [    0.487485@3] hdmitx: system: hdmitx_device.dongle_mode: 0
  192. [    0.487514@3] hdmitx: system: not find product desc
  193. [    0.487516@3] hdmitx: system: not find match pwr-ctl
  194. [    0.487538@3] hdmitx: system: hdmitx_device.drm_feature : 0
  195. [    0.487560@3] hdmitx: system: hpd irq = 30
  196. [    0.487690@3] hdmitx: system: hdcp22_tx_skp failed to probe
  197. [    0.487695@3] hdmitx: system: hdcp22_tx_esm failed to probe
  198. [    0.488122@3] vout: vout1: register server: hdmitx_vout_server
  199. [    0.488126@3] vout: vout2: register server: hdmitx_vout2_server
  200. [    0.488591@3] hdmitx: hdmitx20: Mapped PHY: 0xffd00000
  201. [    0.488598@3] hdmitx: hdmitx20: Mapped PHY: 0xff634400
  202. [    0.488605@3] hdmitx: hdmitx20: Mapped PHY: 0xff900000
  203. [    0.488621@3] hdmitx: hdmitx20: Mapped PHY: 0xff800000
  204. [    0.488625@3] hdmitx: hdmitx20: Mapped PHY: 0xff63c000
  205. [    0.488629@3] hdmitx: hdmitx20: Mapped PHY: 0xffd00000
  206. [    0.488634@3] hdmitx: hdmitx20: Mapped PHY: 0xff608000
  207. [    0.488641@3] hdmitx: hdmitx20: Mapped PHY: 0xff600000
  208. [    0.488647@3] hdmitx: hdmitx20: Mapped PHY: 0xffe01000
  209. [    0.488656@3] hdmitx: hw: alread display in uboot 0x10
  210. [    0.488686@3] hdmitx: hw: avmute set to 1
  211. [    0.488759@3] hdmitx: system: amhdmitx_probe end
  212. [    0.489613@3] vout: create vout attribute OK
  213. [    0.489756@3] vout: vout_fops_create OK
  214. [    0.489760@3] vout: vout1: register server: nulldisp_vout_server
  215. [    0.489784@3] hdmitx: hdmitx_set_current_vmode[3679]
  216. [    0.489787@3] hdmitx: system: recalc before 1080p60hz 60 1
  217. [    0.489791@3] hdmitx: system: recalc after 1080p60hz 2997 50
  218. [    0.489796@3] hdmitx: system: get current mode: 1080p60hz
  219. [    0.489799@3] hdmitx: system: update rx hdr info 0
  220. [    0.489802@3] hdmitx: system: update physcial size: 16 9
  221. [    0.489819@3] hdmitx: system: [set_disp_mode_auto] ALREADY init VIC = 16
  222. [    0.489824@3] vout: init mode 1080p60hz set ok
  223. [    0.489903@3] vout: aml_tvout_mode_monitor
  224. [    0.489915@3] vout: aml_vout_probe OK
  225. [    0.490125@3] chip type:0x28
  226. [    0.490540@3] MEMORY:[0+a0000000]
  227. [    0.490546@3] ramdump_probe, storage device:data
  228. [    0.490548@3] NO valid ramdump args:0 0
  229. [    0.490562@3] ramdump_probe, set sticky to 8a00
  230. [    0.490741@3] Advanced Linux Sound Architecture Driver Initialized.
  231. [    0.495700@3] NetLabel: Initializing
  232. [    0.495706@3] NetLabel:  domain hash size = 128
  233. [    0.495708@3] NetLabel:  protocols = UNLABELED CIPSOv4
  234. [    0.495758@3] NetLabel:  unlabeled traffic allowed by default
  235. [    0.495860@0] hdmitx: system: irq 80000004 0
  236. [    0.498429@3] clocksource: Switched to clocksource arch_sys_counter
  237. [    0.515912@0] hdmitx: system: irq 80000002 0
  238. [    0.585225@1] VFS: Disk quotas dquot_6.6.0
  239. [    0.585364@1] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  240. [    0.599939@1] NET: Registered protocol family 2
  241. [    0.600855@1] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
  242. [    0.601090@1] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
  243. [    0.601881@1] TCP: Hash tables configured (established 32768 bind 32768)
  244. [    0.602038@1] UDP hash table entries: 2048 (order: 4, 65536 bytes)
  245. [    0.602124@1] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
  246. [    0.602527@1] NET: Registered protocol family 1
  247. [    0.605058@1] wifi: power_on_pin_OD = 0;
  248. [    0.605080@1] aml_wifi wifi: [wifi_dev_probe] no power_on_pin2
  249. [    0.605262@1] meson-pwm ffd19000.pwm: pwm pinmux : can't get pinctrl
  250. [    0.605329@1] meson-pwm ffd19000.pwm: pwm pinmux : can't get pinctrl
  251. [    0.605348@1] aml_wifi wifi: [pwm_double_channel_conf_dt] wifi pwm dt ok
  252. [    0.605371@1] aml_wifi wifi: [pwm_double_channel_conf] wifi pwm conf ok
  253. [    0.605377@1] aml_wifi wifi: [wifi_dev_probe] dhd_static_buf setup
  254. [    0.605380@1] Wifi: bcmdhd_init_wlan_mem: bcmdhd_init_wlan_mem 1.579.77.41.9
  255. [    0.605877@1] Wifi: bcmdhd_init_wlan_mem: bcmdhd_init_wlan_mem prealloc ok
  256. [    0.605884@1] aml_wifi wifi: [wifi_dev_probe] interrupt_pin=483
  257. [    0.605889@1] aml_wifi wifi: [wifi_dev_probe] irq_num=0, irq_trigger_type=1
  258. [    0.605893@1] aml_wifi wifi: [wifi_dev_probe] power_on_pin=482
  259. [    0.605897@1] aml_wifi wifi: [wifi_dev_probe] clock_32k_pin=0
  260. [    0.606323@0] aml_wifi wifi: [wifi_setup_dt] wifi_setup_dt
  261. [    0.606544@0] aml_wifi wifi: [wifi_setup_dt] irq num is:(52)
  262. [    0.606549@0] aml_wifi wifi: [wifi_setup_dt] interrupt_pin(483)
  263. [    0.606578@0] aml_wifi wifi: [wifi_setup_dt] power_on_pin(482)
  264. [    0.606807@0] Unpacking initramfs...
  265. [    0.630054@0] Freeing initrd memory: 4676K
  266. [    0.633529@0] hw perfevents: clusterb_enabled = 0
  267. [    0.633543@0] hw perfevents: cpumasks 0xf, 0x0
  268. [    0.633599@0] hw perfevents: cluster A irq = 10
  269. [    0.633742@0] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
  270. [    0.637619@1] audit: initializing netlink subsys (disabled)
  271. [    0.637747@1] audit: type=2000 audit(0.572:1): initialized
  272. [    0.638968@2] workingset: timestamp_bits=46 max_order=20 bucket_order=0
  273. [    0.650769@0] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  274. [    0.651037@0] Registering sdcardfs 0.1
  275. [    0.652839@2] SELinux:  Registering netfilter hooks
  276. [    0.657915@1] NET: Registered protocol family 38
  277. [    0.657941@1] Key type asymmetric registered
  278. [    0.657948@1] Asymmetric key parser 'x509' registered
  279. [    0.658345@1] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
  280. [    0.658356@1] io scheduler noop registered (default)
  281. [    0.658361@1] io scheduler deadline registered
  282. [    0.659212@1] io scheduler cfq registered
  283. [    0.661032@1] meson-pwm ff802000.pwm: pwm pinmux : can't get pinctrl
  284. [    0.662621@0] random: fast init done
  285. [    0.662681@0] random: crng init done
  286. [    0.663059@2] [drm] Initialized
  287. [    0.663210@2] mali ffe40000.bifrost: Continuing without Mali regulator control
  288. [    0.663443@2] mali ffe40000.bifrost: max pp is 2
  289. [    0.663450@2] mali ffe40000.bifrost: set min pp to default 1
  290. [    0.663454@2] mali ffe40000.bifrost: min pp is 1
  291. [    0.663459@2] mali ffe40000.bifrost: min clk  is 4
  292. [    0.663491@2] mali ffe40000.bifrost: hiu io source  0xffffff80083b9000
  293. [    0.663501@2] mali ffe40000.bifrost: hiu io source  0xffffff80083bb000
  294. [    0.663506@2] mali ffe40000.bifrost: num of pp used most of time 1
  295. [    0.663511@2] mali ffe40000.bifrost: clock dvfs cfg table size is 4
  296. [    0.663602@2] mali ffe40000.bifrost: max clk set 2
  297. [    0.663606@2] mali ffe40000.bifrost: max clk  is 2
  298. [    0.663611@2] mali ffe40000.bifrost: turbo clk set to 3
  299. [    0.663615@2] mali ffe40000.bifrost: turbo clk  is 3
  300. [    0.663621@2] mali ffe40000.bifrost: default clk  is 1
  301. [    0.663631@2] mali ffe40000.bifrost: ====================0====================
  302. [    0.663631@2] clk_freq= 285714285, clk_parent=fclk_div7, voltage=1150, keep_count=2, threshod=<100 200>, clk_sample=285
  303. [    0.663638@2] mali ffe40000.bifrost: ====================1====================
  304. [    0.663638@2] clk_freq= 666666666, clk_parent=fclk_div3, voltage=1150, keep_count=1, threshod=<85 200>, clk_sample=666
  305. [    0.663647@2] mali ffe40000.bifrost: ====================2====================
  306. [    0.663647@2] clk_freq= 846000000, clk_parent=  gp0_pll, voltage=1150, keep_count=1, threshod=<179 255>, clk_sample=846
  307. [    0.663654@2] mali ffe40000.bifrost: ====================3====================
  308. [    0.663654@2] clk_freq= 846000000, clk_parent=  gp0_pll, voltage=1150, keep_count=1, threshod=<179 255>, clk_sample=846
  309. [    0.663658@2] mali ffe40000.bifrost: clock dvfs table size is 4
  310. [    0.663852@2] mali_plat=ffffff800a9fbd90
  311. [    0.664123@2] meson_gcooldev is null, no set min status
  312. [    0.664128@2] gpu cooling register okay with err=0
  313. [    0.664225@2] meson_gcooldev is null, no set min status
  314. [    0.664229@2] gpu core cooling register okay with err=0
  315. [    0.664272@2] shader_present=1, tiler_present=1, l2_present=1
  316. [    0.664374@2] Mali_pwr_on:gpu_irq : 200
  317. [    0.664724@2] mali ffe40000.bifrost: GPU identified as 0x3 arch 7.0.9 r0p0 status 0
  318. [    0.666513@1] mali ffe40000.bifrost: Probed as mali0
  319. [    0.667236@1] Unable to detect cache hierarchy for CPU 0
  320. [    0.675570@1] loop: module loaded
  321. [    0.676295@1] mtdoops: mtd device (mtddev=name/number) must be supplied
  322. [    0.677291@1] libphy: Fixed MDIO Bus: probed
  323. [    0.678252@1]  REG0:Addr = ffffff80083d1540
  324. [    0.678267@1] MAC wol not set
  325. [    0.678274@1] wzh pll 9c0040a 927e0000 ac5f49e5
  326. [    0.678477@1] wzh analog 20200000 c000 23
  327. [    0.689057@1] meson6-dwmac ff3f0000.ethernet: no reset control found
  328. [    0.689072@1] stmmac - user ID: 0x11, Synopsys ID: 0x37
  329. [    0.689076@1]  Ring mode enabled
  330. [    0.689083@1]  DMA HW capability register supported
  331. [    0.689087@1]  Normal descriptors
  332. [    0.689089@1]  RX Checksum Offload Engine supported
  333. [    0.689091@1]        COE Type 2
  334. [    0.689093@1]  TX Checksum insertion supported
  335. [    0.689095@1]  Wake-Up On Lan supported
  336. [    0.689176@1] eth%d: device MAC address 02:00:00:2d:17:01
  337. [    0.689178@1]  Enable RX Mitigation via HW Watchdog Timer
  338. [    0.692701@0] libphy: stmmac: probed
  339. [    0.692712@0] eth%d: PHY ID 01803301 at 8 IRQ POLL (stmmac-0:08) active
  340. [    0.695282@0] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  341. [    0.695287@0] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  342. [    0.695807@0] usbcore: registered new interface driver cdc_acm
  343. [    0.695811@0] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  344. [    0.695910@0] usbcore: registered new interface driver usb-storage
  345. [    0.696067@0] usbcore: registered new interface driver usbserial
  346. [    0.696129@0] usbcore: registered new interface driver usbserial_generic
  347. [    0.696181@0] usbserial: USB Serial support registered for generic
  348. [    0.696797@0] mousedev: PS/2 mouse device common for all mice
  349. [    0.697325@0] i2c /dev entries driver
  350. [    0.700532@2] ledtrig-cpu: registered to indicate activity on CPUs
  351. [    0.700960@2] hidraw: raw HID events driver (C) Jiri Kosina
  352. [    0.701569@1] usbcore: registered new interface driver usbhid
  353. [    0.701573@1] usbhid: USB HID core driver
  354. [    0.702865@1] value of voltage_tolerance 0
  355. [    0.704235@1] cpu cpu0: meson_cpufreq_init: CPU 0 initialized
  356. [    0.705648@1] ff803000.serial: clock gate not found
  357. [    0.705756@1] meson_uart ff803000.serial: ==uart0 reg addr = ffffff80083d5000
  358. [    0.705835@1] ff803000.serial: ttyS0 at MMIO 0xff803000 (irq = 20, base_baud = 1500000) is a meson_uart
  359. [    0.705866@1] meson_uart ff803000.serial: ttyS0 use xtal(24M) 24000000 change 0 to 115200
  360. [    0.749268@1] console [ttyS0] enabled
  361. [    0.750480@2] meson_uart ffd24000.serial: ==uart1 reg addr = ffffff80083d7000
  362. [    0.750561@2] ffd24000.serial: ttyS1 at MMIO 0xffd24000 (irq = 29, base_baud = 1500000) is a meson_uart
  363. [    0.752263@0] amlogic-new-usb2-v2 ffe09000.usb2phy: USB2 phy probe:phy_mem:0xffe09000, iomap phy_base:0xffffff80083fa000
  364. [    0.752686@0] amlogic-new-usb3-v2 ffe09080.usb3phy: USB3 phy probe:phy_mem:0xffe09080, iomap phy_base:0xffffff80083fe080
  365. [    0.754939@0] aml_dma ff63e000.aml_dma: Aml dma
  366. [    0.757136@2] aml_aes_dma ff63e000.aml_dma:aml_aes: Aml AES_dma
  367. [    0.757767@2] aml_tdes_dma ff63e000.aml_dma:aml_tdes: Aml TDES_dma
  368. [    0.758715@0] aml_sha_dma ff63e000.aml_dma:aml_sha: Aml SHA1/SHA224/SHA256 dma
  369. [    0.759062@0] meson-remote: Driver init
  370. [    0.759233@0] meson-remote: IR XMP protocol handler initialized
  371. [    0.762147@1] ion_dev soc:ion_dev: assigned reserved memory node linux,ion-dev
  372. [    0.763039@0] ge2d: ge2d_init_module
  373. [    0.763387@0] ge2d: ge2d_dev major:238
  374. [    0.763819@1] ge2d: clock source clk_ge2d_gate ffffffc07dfbad40
  375. [    0.763861@1] ge2d: clock clk_ge2d source ffffffc07dfbaec0
  376. [    0.763883@1] ge2d: clock source clk_vapb_0 ffffffc07dfbac00
  377. [    0.763890@1] ge2d: ge2d init clock is 500000000 HZ, VPU clock is 666666656 HZ
  378. [    0.764068@1] ge2d: ge2d clock is 499 MHZ
  379. [    0.764086@1] ge2d: find address resource
  380. [    0.764114@1] ge2d: map io source 0x00000000ff940000,size=65536 to 0xffffff8008520000
  381. [    0.764119@1] ge2d: reserved mem init failed
  382. [    0.764123@1] ge2d: ge2d: pdev=ffffffc07dd05400, irq=33, clk=ffffffc07dfbad40
  383. [    0.764209@1] ge2d: ge2d start monitor
  384. [    0.764329@1] ge2d: ge2d workqueue monitor start
  385. [    0.765114@0] amvideom vsync irq: 34
  386. [    0.766582@0] amvideocap_probe,amvideocap
  387. [    0.766650@0] use cma buf.
  388. [    0.768073@1] fb: osd_init_module
  389. [    0.768565@1] fb: viu vsync irq: 34
  390. [    0.768577@1] fb: viu2 vsync irq: 42
  391. [    0.768800@1] 0x000000d8:Y=d8,U=0,V=0
  392. [    0.768802@1] 0x000000d9:Y=d9,U=0,V=0
  393. [    0.768805@1] 0x000000da:Y=da,U=0,V=0
  394. [    0.768806@1] 0x000000db:Y=db,U=0,V=0
  395. [    0.769421@0] fb: osd_rdma_init: rdma_table p=0x81e08000,op=0x81e08000 , v=0xffffff8008511000
  396. [    0.769481@0] rdma_register, rdma_table_addr ffffff8008513000 rdma_table_addr_phy 81e09000 reg_buf ffffffc07dc2a000
  397. [    0.769485@0] rdma_register success, handle 2 table_size 4096
  398. [    0.769488@0] fb: osd_rdma_init:osd rdma handle = 2.
  399. [    0.769513@0] fb: mem_size: 0x800000
  400. [    0.769514@0] fb: mem_size: 0x4b80000
  401. [    0.769516@0] fb: mem_size: 0x100000
  402. [    0.769517@0] fb: mem_size: 0x100000
  403. [    0.769518@0] fb: mem_size: 0x800000
  404. [    0.769711@0] meson-fb meson-fb: assigned reserved memory node linux,meson-fb
  405. [    0.769715@0] fb: reserved memory base:0x0000000077800000, size:800000
  406. [    0.770083@0] fb: fb def : 1920 1080 1920 2160 32
  407. [    0.770085@0] fb: init fbdev bpp is:32
  408. [    0.784002@0] fb: osd[0] enable: 1 (swapper/0)
  409. [    0.801860@1] fb: set osd0 reverse as NONE
  410. [    0.817358@0] fb: osd probe OK
  411. [    0.817791@0] hdmitx: hdcp: hdmitx_hdcp_init
  412. [    0.818899@0] vout: vout2: create vout2 attribute OK
  413. [    0.819263@1] vout: vout2: vout2_fops_create OK
  414. [    0.819272@1] vout: vout2: register server: nulldisp_vout2_server
  415. [    0.819289@1] vout: vout2: init mode null set ok
  416. [    0.819769@1] vout: vout2: clktree_init
  417. [    0.819924@1] vout: vout2: aml_vout2_probe OK
  418. [    0.820140@1] DI: di_module_init ok.
  419. [    0.820150@1] DI: di_module_init: major 511
  420. [    0.820891@2] deinterlace deinterlace: assigned reserved memory node linux,di_cma
  421. [    0.820904@2] DI: CMA size 0x2800000.
  422. [    0.820943@2] pre_irq:48
  423. [    0.820950@2] post_irq:49
  424. [    0.820952@2] DI: di_probe allocate rdma channel 0.
  425. [    0.820963@2] di_get_vpu_clkb: get clk vpu error.
  426. [    0.821030@2] DI: vpu clkb <334000000, 667000000>
  427. [    0.821097@2] DI:enable vpu clkb.
  428. [    0.821114@2] 0x000000dc:Y=dc,U=0,V=0
  429. [    0.821116@2] 0x000000dd:Y=dd,U=0,V=0
  430. [    0.821118@2] 0x000000de:Y=de,U=0,V=0
  431. [    0.821120@2] 0x000000df:Y=df,U=0,V=0
  432. [    0.821122@2] 0x000000e0:Y=e0,U=0,V=0
  433. [    0.821124@2] 0x000000e1:Y=e1,U=0,V=0
  434. [    0.821126@2] 0x000000e2:Y=e2,U=0,V=0
  435. [    0.821127@2] 0x000000e3:Y=e3,U=0,V=0
  436. [    0.821129@2] 0x000000f0:Y=f0,U=0,V=0
  437. [    0.821131@2] 0x000000f1:Y=f1,U=0,V=0
  438. [    0.821135@2] 0x000000f2:Y=f2,U=0,V=0
  439. [    0.821137@2] 0x000000f3:Y=f3,U=0,V=0
  440. [    0.821139@2] 0x000000f4:Y=f4,U=0,V=0
  441. [    0.821141@2] 0x000000f5:Y=f5,U=0,V=0
  442. [    0.821143@2] 0x000000f6:Y=f6,U=0,V=0
  443. [    0.821145@2] 0x000000f7:Y=f7,U=0,V=0
  444. [    0.821148@2] 0x000000f8:Y=f8,U=0,V=0
  445. [    0.821150@2] 0x000000f9:Y=f9,U=0,V=0
  446. [    0.821152@2] 0x000000fa:Y=fa,U=0,V=0
  447. [    0.821154@2] 0x000000fb:Y=fb,U=0,V=0
  448. [    0.821156@2] 0x000000fc:Y=fc,U=0,V=0
  449. [    0.821158@2] 0x000000fd:Y=fd,U=0,V=0
  450. [    0.821161@2] 0x000000fe:Y=fe,U=0,V=0
  451. [    0.821163@2] DI: support post write back 254.
  452. [    0.821391@2] DI: di_probe:Di use HRTIMER
  453. [    0.821594@1] di_probe:ok
  454. [    0.821781@1] vdin_drv_init: major 510
  455. [    0.822195@1] vdin_drv_init: vdin driver init done
  456. [    0.822199@1] [viuin..]viuin_init_module viuin module init
  457. [    0.822715@1] [viuin..]viuin_probe probe ok.
  458. [    0.823267@1] [RX]-hdmirx: hdmirx_init.
  459. [    0.823271@1] ESM HLD: Initializing...
  460. [    0.823515@2] tvin_afe: tvafe_drv_init: major 508
  461. [    0.823819@2] tvin_afe: tvafe_drv_init.
  462. [    0.824000@2] tvafe_vbi: vbi: vbi_init.
  463. [    0.824167@2] PPMGRDRV: warn: ppmgr module init func called
  464. [    0.824321@2] PPMGRDRV: err: ppmgr_driver_probe called
  465. [    0.825314@2] Reserved memory: failed to init DMA memory pool at 0x0000000095800000, size 0 MiB
  466. [    0.834103@2] PPMGRDRV: info: ppmgr_dev major:506
  467. [    0.835241@0] picdec_driver_probe called.
  468. [    0.835776@2] picdec: probe of picdec failed with error -22
  469. [    0.836111@1] videosync_create_instance dev_s ffffffc056cf9000,dev_s->dev ffffffc062e81e80
  470. [    0.836116@1] videosync_create_instance reg videosync.0
  471. [    0.836237@1] aml_vecm_init:module init
  472. [    0.836278@2] videosync_thread started
  473. [    0.836670@1]
  474. [    0.836670@1]  VECM probe start
  475. [    0.837065@2] Can't find  wb_sel.
  476. [    0.837068@2] hdr:Can't find  cfg_en_osd_100.
  477. [    0.837073@2] amlogic, vecm
  478. [    0.837078@2] vlock dt support: 1
  479. [    0.837080@2] vlock dt new_fsm: 0
  480. [    0.837081@2] vlock dt hwver: 0
  481. [    0.837082@2] vlock dt phlock_en: 0
  482. [    0.837087@2] Can't find  vlock_en.
  483. [    0.837089@2] Can't find  vlock_mode.
  484. [    0.837091@2] Can't find  vlock_pll_m_limit.
  485. [    0.837093@2] Can't find  vlock_line_limit.
  486. [    0.837113@2] param_config vlock_en:1
  487. [    0.837153@2] vlock_status_init vlock_en:0
  488. [    0.837155@2] aml_vecm_probe: ok
  489. [    0.837937@2] meson-mmc: mmc driver version: 3.02, 2017-05-15: New Emmc Host Controller
  490. [    0.839554@1] meson-mmc: >>>>>>>>hostbase ffffff8008531000, dmode
  491. [    0.840538@1] meson-mmc: actual_clock :400000, HHI_nand: 0x80
  492. [    0.840543@1] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x1000033c
  493. [    0.840588@1] meson-mmc: emmc: fixdiv calc done: adj = 2d2000
  494. [    0.882511@1] meson-mmc: meson_mmc_probe() : success!
  495. [    0.895203@2] meson-mmc: >>>>>>>>hostbase ffffff800853a000, dmode
  496. [    0.895940@2] meson-mmc: gpio_cd = 1ca
  497. [    0.934763@2] meson-mmc: >>>>>>>>hostbase ffffff800853a000, dmode
  498. [    0.936859@2] meson-mmc: actual_clock :400000, HHI_nand: 0x80
  499. [    0.936863@2] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x1000033c
  500. [    0.963831@1] meson-aml-mmc ffe07000.emmc: divider requested rate 200000000 != actual rate 199999997: ret=0
  501. [    0.963844@1] meson-mmc: actual_clock :199999997, HHI_nand: 0x80
  502. [    0.963847@1] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x10000345
  503. [    0.963856@1] meson-mmc: Data 1 aligned delay is 0
  504. [    0.963859@1] meson-mmc: emmc: clk 199999997 tuning start
  505. [    0.967222@1] meson-mmc: emmc: rx_tuning_result[0] = 40
  506. [    0.967270@1] meson-mmc: Tuning transfer error: nmatch=0 tuning_err:0xffffffac
  507. [    0.968914@1] meson-mmc: Tuning transfer error: nmatch=0 tuning_err:0xffffffac
  508. [    0.974512@2] meson-mmc: meson_mmc_probe() : success!
  509. [    0.974937@2] amlogic mtd driver init
  510. [    0.976359@2] aml_vrtc rtc: rtc core: registered aml_vrtc as rtc0
  511. [    0.976572@2] input: aml_vkeypad as /devices/platform/rtc/input/input0
  512. [    0.978084@1] meson-mmc: emmc: rx_tuning_result[3] = 40
  513. [    0.979223@0] cectx ff80023c.aocec: cec driver date:Ver 2019/3/25
  514. [    0.979223@0]
  515. [    0.984556@2] cectx ff80023c.aocec: compatible:amlogic, aocec-g12a
  516. [    0.984717@1] meson-mmc: emmc: rx_tuning_result[4] = 40
  517. [    0.984721@1] meson-mmc: emmc: best_win_start =3, best_win_size =3
  518. [    0.984726@1] meson-mmc: emmc: sd_emmc_regs->gclock=0x10000345,sd_emmc_regs->gadjust=0x42000
  519. [    0.985349@1] emmc: new HS200 MMC card at address 0001
  520. [    0.990079@2] emmc: clock 199999997, 8-bit-bus-width
  521. [    0.990079@2]
  522. [    0.990080@2] cectx ff80023c.aocec: cecb_ver:0x1
  523. [    0.990290@1] mmcblk0: emmc:0001 Biwin  58.3 GiB
  524. [    0.990595@1] mmcblk0boot0: emmc:0001 Biwin  partition 1 4.00 MiB
  525. [    0.994617@2] cectx ff80023c.aocec: line_reg:0x1
  526. [    0.994941@1] mmcblk0boot1: emmc:0001 Biwin  partition 2 4.00 MiB
  527. [    0.999206@2] cectx ff80023c.aocec: line_bit:0x3
  528. [    0.999423@1] mmcblk0rpmb: emmc:0001 Biwin  partition 3 4.00 MiB
  529. [    1.001496@1] meson-mmc: Enter aml_emmc_partition_ops
  530. [    1.002009@1] meson-mmc: [mmc_read_partition_tbl] mmc read partition OK!
  531. [    1.002011@1] meson-mmc: add_emmc_partition
  532. [    1.002391@1] meson-mmc: [mmcblk0p01]           bootloader  offset 0x000000000000, size 0x000000400000
  533. [    1.002479@1] meson-mmc: [mmcblk0p02]             reserved  offset 0x000002400000, size 0x000004000000
  534. [    1.002491@1] meson-mmc: [mmcblk0p03]                cache  offset 0x000006c00000, size 0x000046000000
  535. [    1.002762@1] meson-mmc: [mmcblk0p04]                  env  offset 0x00004d400000, size 0x000000800000
  536. [    1.002785@1] meson-mmc: [mmcblk0p05]                 logo  offset 0x00004e400000, size 0x000000800000
  537. [    1.002795@1] meson-mmc: [mmcblk0p06]             recovery  offset 0x00004f400000, size 0x000001800000
  538. [    1.002804@1] meson-mmc: [mmcblk0p07]                 misc  offset 0x000051400000, size 0x000000800000
  539. [    1.002933@1] meson-mmc: [mmcblk0p08]                 dtbo  offset 0x000052400000, size 0x000000800000
  540. [    1.002948@1] meson-mmc: [mmcblk0p09]             cri_data  offset 0x000053400000, size 0x000000800000
  541. [    1.002958@1] meson-mmc: [mmcblk0p10]                param  offset 0x000054400000, size 0x000001000000
  542. [    1.002967@1] meson-mmc: [mmcblk0p11]                 boot  offset 0x000055c00000, size 0x000001000000
  543. [    1.002976@1] meson-mmc: [mmcblk0p12]                  rsv  offset 0x000057400000, size 0x000001000000
  544. [    1.002986@1] meson-mmc: [mmcblk0p13]             metadata  offset 0x000058c00000, size 0x000001000000
  545. [    1.002995@1] meson-mmc: [mmcblk0p14]               vbmeta  offset 0x00005a400000, size 0x000000200000
  546. [    1.003003@1] meson-mmc: [mmcblk0p15]                  tee  offset 0x00005ae00000, size 0x000002000000
  547. [    1.003012@1] meson-mmc: [mmcblk0p16]               vendor  offset 0x00005d600000, size 0x000030000000
  548. [    1.003021@1] meson-mmc: [mmcblk0p17]                  odm  offset 0x00008de00000, size 0x000008000000
  549. [    1.003030@1] meson-mmc: [mmcblk0p18]               system  offset 0x000096600000, size 0x000050000000
  550. [    1.003039@1] meson-mmc: [mmcblk0p19]              product  offset 0x0000e6e00000, size 0x000008000000
  551. [    1.003048@1] meson-mmc: [mmcblk0p20]                 data  offset 0x0000ef600000, size 0x000da0a00000
  552. [    1.003076@1] card key: card_blk_probe.
  553. [    1.003081@1] emmc_key_init:183 emmc key lba_start:0x12020,lba_end:0x12220
  554. [    1.003085@1] emmc key: emmc_key_init:205 ok.
  555. [    1.003906@2] meson-mmc: amlmmc_dtb_init: register dtb chardev
  556. [    1.003907@2] cectx ff80023c.aocec: ee_to_ao:0x1
  557. [    1.005638@1] meson-mmc: calc 6f7d7e7f, store 6f7d7e7f
  558. [    1.008021@1] meson-mmc: calc 6f7d7e7f, store 6f7d7e7f
  559. [    1.008025@1] meson-mmc: total valid 2
  560. [    1.008476@2] meson-mmc: amlmmc_dtb_init: register dtb chardev OK
  561. [    1.008502@2] input: cec_input as /devices/virtual/input/input1
  562. [    1.008511@1] meson-mmc: Exit aml_emmc_partition_ops OK.
  563. [    1.008712@0] cectx ff80023c.aocec: not find 'port_num'
  564. [    1.013600@0] cectx ff80023c.aocec: using cec:1
  565. [    1.015338@3] clear:79400000, free:79400000, tick:473900 us
  566. [    1.018228@0] cectx ff80023c.aocec: no hdmirx regs
  567. [    1.022787@0] cectx ff80023c.aocec: no hhi regs
  568. [    1.026606@1] hdmitx: system: plugin
  569. [    1.027296@0] cectx ff80023c.aocec: not find 'output'
  570. [    1.028637@1] hdmitx: hdmitx: ddc rd8b error 0x50 0x00 0x00
  571. [    1.033780@0] cectx ff80023c.aocec: irq cnt:2
  572. [    1.036860@0] cectx ff80023c.aocec: wakeup_reason:0x0
  573. [    1.041739@0] cectx ff80023c.aocec: cev val1: 0x0;val2: 0x0
  574. [    1.047229@0] cectx ff80023c.aocec: aml_cec_probe success end
  575. [    1.053336@0] unifykey: storage in base: 0xffffffc005000000
  576. [    1.053338@0] unifykey: storage out base: 0xffffffc005040000
  577. [    1.053339@0] unifykey: storage block base: 0xffffffc005080000
  578. [    1.053340@0] unifykey: probe done!
  579. [    1.053660@0] unifykey: no efuse-version set, use default value: -1
  580. [    1.053663@0] unifykey: key unify config unifykey-num is 16
  581. [    1.053728@0] unifykey: key unify fact unifykey-num is 16
  582. [    1.053736@0] unifykey: unifykey_devno: 1f400000
  583. [    1.054082@0] unifykey: device unifykeys created ok
  584. [    1.054127@0] unifykey: aml_unifykeys_init done!
  585. [    1.054186@0] meson ts init
  586. [    1.054247@0] tsensor id: 0
  587. [    1.054369@0] tsensor trim info: 0xfa0080df!
  588. [    1.054371@0] tsensor hireboot: 0xc0ff2b00
  589. [    1.054455@0] meson ts init
  590. [    1.054470@0] tsensor id: 1
  591. [    1.054543@0] tsensor trim info: 0xfa0080bc!
  592. [    1.054546@0] tsensor hireboot: 0xc0ff2af0
  593. [    1.054706@0] audio_dsp: [dsp]register dsp to char divece(257)
  594. [    1.055052@0] amaudio: amaudio: driver amaudio init!
  595. [    1.055868@0] amaudio: amaudio_init - amaudio: driver amaudio succuess!
  596. [    1.056535@0] sysled: module init
  597. [    1.056739@0] meson_wdt ffd0f0d0.watchdog: start watchdog
  598. [    1.056743@0] meson_wdt ffd0f0d0.watchdog: creat work queue for watch dog
  599. [    1.057294@0] meson_wdt ffd0f0d0.watchdog: AML Watchdog Timer probed done
  600. [    1.057731@0] amlogic rfkill init
  601. [    1.057826@0] enter bt_probe of_node
  602. [    1.057849@0] not get gpio_en
  603. [    1.057855@0] power on valid level is high
  604. [    1.057857@0] bt: power_on_pin_OD = 0;
  605. [    1.057859@0] bt: power_off_flag = 1;
  606. [    1.057861@0] dis power down = 0;
  607. [    1.138490@2] meson-mmc: card IN
  608. [    1.157869@1] hdmitx: edid: EDID Parser:
  609. [    1.157877@1] hdmitx: edid: get dtd0 vic: 16
  610. [    1.157883@1] hdmitx: edid: get dtd1 vic: 120
  611. [    1.157897@1] hdmitx: edid: get dtd2 vic: 16
  612. [    1.157899@1] hdmitx: edid: find IEEEOUT
  613. [    1.157928@1] hdmitx: edid: check sum valid
  614. [    1.157931@1] hdmitx: edid: check sum valid
  615. [    1.157935@1] hdmitx: edid: update rx hdr info 0 at edid parsing
  616. [    1.157938@1] hdmitx: edid: check sum valid
  617. [    1.157941@1] hdmitx: edid: check sum valid
  618. [    1.157946@1] hdmitx: edid: blk0 raw data
  619. [    1.157969@1] hdmitx: edid:
  620. [    1.157969@1] 00ffffffffffff001e6d0100010101010119010380a05a780aee91a3544c9926
  621. [    1.157969@1] 0f5054a1080031404540614071408180010101010101023a801871382d40582c
  622. [    1.157969@1] 450040846300001e662150b051001b304070360040846300001e000000fd003a
  623. [    1.157969@1] 3e1e5310000a202020202020000000fc004c472054560a2020202020202001e6
  624. [    1.157969@1]
  625. [    1.157969@1]
  626. [    1.157972@1] hdmitx: edid: blk1 raw data
  627. [    1.157996@1] hdmitx: edid:
  628. [    1.157996@1] 02033af14e109f041305140302122021221501293d06c015075009570778030c
  629. [    1.157996@1] 002000801e20c00e014f3ffc08101810061016102810e3050301023a80187138
  630. [    1.157996@1] 2d40582c450040846300001e011d8018711c1620582c250040846300009e011d
  631. [    1.157996@1] 007251d01e206e28550040846300001e000000000000000000000000000000b8
  632. [    1.157996@1]
  633. [    1.157996@1]
  634. [    1.158001@1] hdmitx: system: update physcial size: 1600 900
  635. [    1.158009@1] hdmitx: system: get current mode: 1080p60hz
  636. [    1.158011@1] hdmitx: system: update rx hdr info 0
  637. [    1.158012@1] hdmitx: system: update physcial size: 1600 900
  638. [    1.158030@1] hdmitx: system: [set_disp_mode_auto] ALREADY init VIC = 16
  639. [    1.158033@1] hdmitx: hw: set audio
  640. [    1.158039@1] hdmitx: hw: hdmitx tx_aud_src = 0, audio_param->channel_num = 0, hdev->aud_output_ch = 0
  641. [    1.158051@0] hdmitx: system: irq 80000001 0
  642. [    1.158052@1] hdmitx: fs = 0, cd = 4, tmds_clk = 148352
  643. [    1.158055@1] hdmitx: hw: aud_n_para = 5824
  644. [    1.158063@1] hdmitx: hw: set channel status
  645. [    1.243300@2] meson-mmc: normal card in
  646. [    1.258458@1] hdmitx: [0x10000103]: 0x00000008
  647. [    1.258461@1] hdmitx: [0x10000104]: 0x00000001
  648. [    1.258465@1] hdmitx: [0x10000170]: 0x00000010
  649. [    1.258468@1] hdmitx: [0x10000180]: 0x000000ff
  650. [    1.258471@1] hdmitx: [0x10000181]: 0x000000ff
  651. [    1.258474@1] hdmitx: [0x10000182]: 0x00000003
  652. [    1.258477@1] hdmitx: [0x10000183]: 0x00000007
  653. [    1.258479@1] hdmitx: [0x10000184]: 0x0000003f
  654. [    1.258482@1] hdmitx: [0x10000185]: 0x00000002
  655. [    1.258485@1] hdmitx: [0x10000187]: 0x000000ff
  656. [    1.258488@1] hdmitx: [0x10000188]: 0x00000003
  657. [    1.366492@2] meson-mmc: actual_clock :400000, HHI_nand: 0x80
  658. [    1.366495@2] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x1000033c
  659. [    1.431087@2] meson-mmc: actual_clock :50000000, HHI_nand: 0x80
  660. [    1.431090@2] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x10000254
  661. [    1.431459@2] sd: new high speed SDXC card at address 0001
  662. [    1.431464@2] sd: clock 50000000, 4-bit-bus-width
  663. [    1.431464@2]
  664. [    1.431942@2] mmcblk1: sd:0001 EC2QT 59.6 GiB
  665. [    1.433217@2]  mmcblk1: p1 p2
  666. [    1.498877@0] meson-saradc ff809000.saradc: set delay per tick to <1ms> by default.
  667. [    1.498883@0] meson-saradc ff809000.saradc: set ticks per period to <1> by default.
  668. [    1.500130@0] dmc_monitor_probe
  669. [    1.516598@0] defendkey ff630218.defendkey: Reserved memory is not enough!
  670. [    1.517884@0] defendkey: probe of ff630218.defendkey failed with error -22
  671. [    1.518224@0] register clk_set_setting cpu[40]
  672. [    1.518555@0] Registered firmware driver success.
  673. [    1.519275@0] Try to load video/h264_enc.bin  ...
  674. [    1.519334@0] load firmware size : 76288, Name : video/h264_enc.bin.
  675. [    1.519342@0] the fw pack ver v0.0 is too lower.
  676. [    1.519344@0] it may work abnormally so need to be update in time.
  677. [    1.519993@0] Try to load video/video_ucode.bin  ...
  678. [    1.521129@0] load firmware size : 1671680, Name : video/video_ucode.bin.
  679. [    1.531658@0] ammvdec_mpeg4_driver_init_module
  680. [    1.531706@0] amvdec_vc1 module init
  681. [    1.531749@0] amvdec_h264 module init
  682. [    1.531870@0] ammvdec_h264 module init
  683. [    1.531921@0] amvdec_h265 module init
  684. [    1.532013@0] amvdec_vp9 module init
  685. [    1.532235@0] amvdec_avs module init
  686. [    1.532397@0] amvenc_avc_probe -- reserved memory config fail.
  687. [    1.532400@0] amvenc_avc - cma memory pool size: 60 MB
  688. [    1.532416@0] encode_wq_init.
  689. [    1.532420@0] encode start monitor.
  690. [    1.532567@0] encode workqueue monitor start.
  691. [    1.532717@0] vpu_init
  692. [    1.532823@0] vpu_probe
  693. [    1.532825@0] HevcEnc reserved memory config fail.
  694. [    1.532827@0] HevcEnc - cma memory pool size: 64 MB
  695. [    1.532843@0] HevcEnc - wave420l_irq: 40
  696. [    1.532880@0] vpu base address get from platform driver physical base addr=0xff610000, virtual base=0xffffff80085ac000
  697. [    1.532992@0] success to probe vpu device with video memory from cma
  698. [    1.533138@0] Amlogic A/V streaming port init
  699. [    1.534098@0] get gate demux control ok ffffffc056ffb140
  700. [    1.534110@0] get gate parser_top control ok ffffffc056ffb1c0
  701. [    1.534135@0] get gate vdec control ok ffffffc056ffb240
  702. [    1.534165@0] get gate clk_81 control ok ffffffc056ffb2c0
  703. [    1.534202@0] get gate clk_vdec_mux control ok ffffffc056ffb340
  704. [    1.534243@0] get gate clk_hcodec_mux control ok ffffffc056ffb3c0
  705. [    1.534287@0] get gate clk_hevc_mux control ok ffffffc056ffb440
  706. [    1.534337@0] get gate clk_hevcb_mux control ok ffffffc056ffb4c0
  707. [    1.534357@0] get gate ahbarb0 control ok ffffffc056ffb540
  708. [    1.534364@0] get gate asyncfifo control failed           (null)
  709. [    1.534843@0] bl301_manager: driver init
  710. [    1.534848@0] bl301_manager: IR remote wake-up code: 0xffffffff
  711. [    1.534850@0] bl301_manager: IR remote wake-up code mask: 0xffffffff
  712. [    1.534851@0] bl301_manager: IR remote wake-up code protocol: 0x0
  713. [    1.534854@0] bl301_manager: enable 5V system power on suspend/power off state: 0
  714. [    1.539393@0] usbcore: registered new interface driver snd-usb-audio
  715. [    1.540426@0] aml_codec_T9015 ff632000.t9015: aml_T9015_audio_codec_probe
  716. [    1.540521@0] T9015 acodec used by auge, tdmout:1
  717. [    1.541453@0] Error: Driver 'spdif-dit' is already registered, aborting...
  718. [    1.543022@0] asoc debug: aml_audio_controller_probe-116
  719. [    1.543984@0] asoc-aml-card auge_sound: aml_card_probe, parse error -517
  720. [    1.549394@0] aml_card_probe error ret:-517
  721. [    1.554002@0] aml_tdm_platform_probe, tdm ID = 0, lane_cnt = 4
  722. [    1.554013@0] TDM id 0 i2s2hdmi:0
  723. [    1.554022@0] snd_tdm ff642000.audiobus:tdma: lane_mask_out = 0, lane_oe_mask_out = 0
  724. [    1.554168@0] No channel mask node Channel_Mask
  725. [    1.554384@0] aml_tdm_platform_probe, tdm ID = 1, lane_cnt = 4
  726. [    1.554458@0] TDM id 1 samesource_sel:3
  727. [    1.554460@0] TDM id 1 i2s2hdmi:0
  728. [    1.554468@0] snd_tdm ff642000.audiobus:tdmb: lane_mask_out = 1, lane_oe_mask_out = 0
  729. [    1.554668@0] No channel mask node Channel_Mask
  730. [    1.554823@0] aml_tdm_platform_probe, tdm ID = 2, lane_cnt = 4
  731. [    1.554833@0] TDM id 2 i2s2hdmi:0
  732. [    1.554840@0] snd_tdm ff642000.audiobus:tdmc: lane_mask_out = f, lane_oe_mask_out = 0
  733. [    1.554980@0] No channel mask node Channel_Mask
  734. [    1.555521@0] aml_spdif_platform_probe, spdif ID = 0
  735. [    1.555785@0] SPDIF id 0 asrc_id:0 auto_asrc:0
  736. [    1.555852@0] spdifout_play_with_zerodata, spdif id:0 enable:0
  737. [    1.555856@0] spdif_a fifo ctrl, frddr:0 type:3, 32 bits, chmask 0x3, swap 0x10
  738. [    1.555862@0] spdif_info: rate: 48000, channel status ch0_l:0x100, ch0_r:0x100, ch1_l:0x200, ch1_r:0x200
  739. [    1.555868@0] hdmitx: audio: aout notify format CT_PCM
  740. [    1.555870@0] hdmitx: hw: set audio
  741. [    1.555872@0] hdmitx: hw: hdmitx tx_aud_src = 0, audio_param->channel_num = 1, hdev->aud_output_ch = 0
  742. [    1.555890@0] hdmitx: fs = 3, cd = 4, tmds_clk = 148352
  743. [    1.555893@0] hdmitx: hw: aud_n_para = 5824
  744. [    1.555902@0] hdmitx: hw: set channel status
  745. [    1.555936@0] hdmitx: audio: Audio Type: PCM
  746. [    1.555937@0] hdmitx: audio: set audio param
  747. [    1.555940@0] spdif_a is set to enable
  748. [    1.555950@0] aml_spdif_platform_probe, register soc platform
  749. [    1.555984@0] aml_spdif_platform_probe, spdif ID = 1
  750. [    1.556032@0] spdifout_play_with_zerodata, spdif id:1 enable:0
  751. [    1.556037@0] spdif_b fifo ctrl, frddr:0 type:3, 32 bits, chmask 0x3, swap 0x10
  752. [    1.556040@0] spdif_info: rate: 48000, channel status ch0_l:0x100, ch0_r:0x100, ch1_l:0x200, ch1_r:0x200
  753. [    1.556045@0] spdif_b is set to enable
  754. [    1.556052@0] aml_spdif_platform_probe, register soc platform
  755. [    1.556740@0] default set lane_mask_in as all lanes.
  756. [    1.556744@0] aml_pdm_platform_probe pdm filter mode from dts:1
  757. [    1.556755@0] aml_pdm_platform_probe, register soc platform
  758. [    1.557092@0] audio_ddr_mngr: 0, irqs toddr 21, frddr 24
  759. [    1.557096@0] audio_ddr_mngr: 1, irqs toddr 22, frddr 25
  760. [    1.557098@0] audio_ddr_mngr: 2, irqs toddr 23, frddr 26
  761. [    1.557358@0] audiolocker_platform_probe
  762. [    1.557697@0] resample_platform_probe
  763. [    1.558112@0] parse power det src:4,         hi_th:0x70000, lo_th:0x16000
  764. [    1.558685@0] Register vad
  765. [    1.558937@0] Netfilter messages via NETLINK v0.30.
  766. [    1.559048@0] Initializing XFRM netlink socket
  767. [    1.559067@0] NET: Registered protocol family 17
  768. [    1.559101@0] Key type dns_resolver registered
  769. [    1.560684@0] Registered swp emulation handler
  770. [    1.560732@0] Registered cp15_barrier emulation handler
  771. [    1.560743@0] Registered setend emulation handler
  772. [    1.561271@0] registered taskstats version 1
  773. [    1.774558@0] aml_dai_spdif_probe
  774. [    1.774568@0] aml_dai_spdif_probe
  775. [    1.774591@0] asoc-aml-card auge_sound: control 2:0:0:I2SIn CLK:0 is already present
  776. [    1.776709@0] snd_tdm ff642000.audiobus:tdmc: ASoC: Failed to add I2SIn CLK: -16
  777. [    1.784093@0] aml_dai_tdm_probe, failed add snd spdif controls
  778. [    1.789902@0] set normal 512 fs /4 fs
  779. [    1.789931@0]         set spdifout clk:6144000, mpll:24576000
  780. [    1.789933@0]         get spdifout clk:6143997, mpll:24575987
  781. [    1.789944@0] aml_dai_set_spdif_fmt , fmt 0x4010
  782. [    1.790039@0] aml_spdif_new spdif_b, clk continuous:1
  783. [    1.790042@0] spdifout_play_with_zerodata_free, spdif id:1
  784. [    1.790376@0] asoc-aml-card auge_sound: dummy <-> SPDIF-B mapping ok
  785. [    1.790395@0] set mclk:12288000, mpll:24576000, get mclk:12287994, mpll:24575987
  786. [    1.790400@0] aml_dai_set_tdm_slot(), txmask(0x3), rxmask(0x3)
  787. [    1.790404@0]        lanes_out_cnt(1), lanes_in_cnt(1)
  788. [    1.790405@0]        lanes_oe_out_cnt(0), lanes_oe_in_cnt(0)
  789. [    1.790408@0]        lanes_lb_cnt(0)
  790. [    1.790410@0]        slots(2), slot_width(32)
  791. [    1.790455@0] asoc aml_dai_set_tdm_fmt, 0x4011, ffffffc07df3e818, id(1), clksel(1)
  792. [    1.790464@0] master_mode(1), binv(1), finv(1) out_skew(2), in_skew(3)
  793. [    1.790777@0] asoc-aml-card auge_sound: T9015-audio-hifi <-> TDM-B mapping ok
  794. [    1.790781@0] set normal 512 fs /4 fs
  795. [    1.790796@0]         set spdifout clk:6144000, mpll:24576000
  796. [    1.790799@0]         get spdifout clk:6143997, mpll:24575987
  797. [    1.790803@0] aml_dai_set_spdif_fmt , fmt 0x4010
  798. [    1.790878@0] aml_spdif_new spdif_a, clk continuous:1
  799. [    1.790881@0] spdifout_play_with_zerodata_free, spdif id:0
  800. [    1.791125@0] asoc-aml-card auge_sound: dummy <-> SPDIF mapping ok
  801. [    1.791140@0] set mclk:12288000, mpll:24576000, get mclk:12287994, mpll:24575987
  802. [    1.791145@0] aml_dai_set_tdm_slot(), txmask(0x3), rxmask(0x3)
  803. [    1.791148@0]        lanes_out_cnt(4), lanes_in_cnt(1)
  804. [    1.791151@0]        lanes_oe_out_cnt(0), lanes_oe_in_cnt(0)
  805. [    1.791152@0]        lanes_lb_cnt(0)
  806. [    1.791153@0]        slots(2), slot_width(32)
  807. [    1.791160@0] asoc aml_dai_set_tdm_fmt, 0x4011, ffffffc07df3e918, id(2), clksel(2)
  808. [    1.791163@0] master_mode(1), binv(1), finv(1) out_skew(2), in_skew(3)
  809. [    1.791428@0] asoc-aml-card auge_sound: dummy <-> TDM-C mapping ok
  810. [    1.793205@0] snd_card_add_kcontrols card:ffffffc056cbf018
  811. [    1.793226@0] effect_v2 is not init
  812. [    1.793227@0] Not init vad
  813. [    1.793230@0] Failed to add VAD controls
  814. [    1.793257@0] eq/drc v1 function enable
  815. [    1.818529@0] add line-out mute controls
  816. [    1.819137@0] dwc3 ff500000.dwc3: Configuration mismatch. dr_mode forced to host
  817. [    1.821875@0] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
  818. [    1.821889@0] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
  819. [    1.821901@0] usb: xhci: determined sg_tablesize: 4294967295
  820. [    1.822158@0] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228fe6c hci version 0x110 quirks 0x20010010
  821. [    1.822198@0] xhci-hcd xhci-hcd.0.auto: irq 14, io mem 0xff500000
  822. [    1.822322@0] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  823. [    1.822327@0] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  824. [    1.822330@0] usb usb1: Product: xHCI Host Controller
  825. [    1.822334@0] usb usb1: Manufacturer: Linux 4.9.190 xhci-hcd
  826. [    1.822338@0] usb usb1: SerialNumber: xhci-hcd.0.auto
  827. [    1.822789@0] hub 1-0:1.0: USB hub found
  828. [    1.822810@0] hub 1-0:1.0: 2 ports detected
  829. [    1.823064@0] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
  830. [    1.823075@0] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
  831. [    1.823084@0] usb: xhci: determined sg_tablesize: 4294967295
  832. [    1.823143@0] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
  833. [    1.823217@0] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
  834. [    1.823221@0] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  835. [    1.823225@0] usb usb2: Product: xHCI Host Controller
  836. [    1.823228@0] usb usb2: Manufacturer: Linux 4.9.190 xhci-hcd
  837. [    1.823230@0] usb usb2: SerialNumber: xhci-hcd.0.auto
  838. [    1.823557@0] hub 2-0:1.0: USB hub found
  839. [    1.823573@0] hub 2-0:1.0: 1 port detected
  840. [    1.824022@0] aml_vrtc rtc: setting system clock to 2019-10-10 15:14:45 UTC (1570720485)
  841. [    1.824297@0] dwc_otg ff400000.dwc2_a: dwc_otg_driver_probe(ffffffc07dc78000)
  842. [    1.824328@0] dwc_otg: usb0: type: 2 speed: 0, config: 0, dma: 0, id: 0, phy: ffe09000, ctrl: 0
  843. [    1.824332@0] dwc_otg_driver_probe host only, not probe usb_otg!!!
  844. [    1.825284@0] meson_cdev probe
  845. [    1.825293@0] thermal: read gpupp failed
  846. [    1.825446@0] meson_cdev index: 0
  847. [    1.825567@0] thermal: read gpupp failed
  848. [    1.827565@0] meson_cdev index: 1
  849. [    1.827570@0] cpucore_cooling_register, max_cpu_core_num:4
  850. [    1.827666@0] meson_cdev index: 2
  851. [    1.827669@0] thermal: read gpupp failed
  852. [    1.831418@0] meson_cdev index: 3
  853. [    1.831453@0] find tzd id: 0
  854. [    1.831563@0] find tzd id: 0
  855. [    1.831589@0] meson_cdev probe done
  856. [    1.831728@0] gxbb_pm: enter meson_pm_probe!
  857. [    1.831753@0] gxbb_pm: meson_pm_probe done
  858. [    1.832047@0] ALSA device list:
  859. [    1.832049@0]   #0: AML-AUGESOUND
  860. [    1.833654@0] Freeing unused kernel memory: 4800K
  861. [    1.876513@2] fb: malloc_osd_memory, cma:ffffff800abc7670
  862. [    1.876520@2] fb: malloc_osd_memory, 1283, base:0x0000000077800000, size:8388608
  863. [    1.876543@2] fb: use ion buffer for fb memory, fb_index=0
  864. [    1.899173@2] meson-fb meson-fb: create ion_client ffffffc0655dbd80, handle=ffffffc06557e980
  865. [    1.899181@2] meson-fb meson-fb: ion memory(0): created fb at 0x0000000098000000, size 75 MiB
  866. [    1.899184@2] fb: Frame buffer memory assigned at
  867. [    1.899188@2] fb:  0, phy: 0x0000000098000000, vir:0xffffff800acba000, size=77312K
  868. [    1.899188@2]
  869. [    1.899191@2] fb: logo_index=0,fb_index=0
  870. [    1.899194@2] fb: ---------------clear fb0 memory ffffff800acba000
  871. [    1.930711@2] fb: osd[0] canvas.idx =0x40
  872. [    1.930714@2] fb: osd[0] canvas.addr=0x98000000
  873. [    1.930717@2] fb: osd[0] canvas.width=7680
  874. [    1.930719@2] fb: osd[0] canvas.height=2160
  875. [    1.930721@2] fb: osd[0] frame.width=1920
  876. [    1.930722@2] fb: osd[0] frame.height=1080
  877. [    1.930726@2] fb: osd[0] out_addr_id =0x1
  878. [    1.935245@2] fb: osd_release now.index=0,open_count=1
  879. [    1.937064@3] fb: malloc_osd_memory, cma:ffffff800abc7670
  880. [    1.937071@3] fb: malloc_osd_memory, 1283, base:0x0000000077800000, size:8388608
  881. [    1.937073@3] fb: use ion buffer for fb memory, fb_index=1
  882. [    1.937802@3] meson-fb meson-fb: create ion_client ffffffc0655dbd80, handle=ffffffc056df5280
  883. [    1.937807@3] meson-fb meson-fb: ion memory(1): created fb at 0x000000009cc00000, size 1 MiB
  884. [    1.937810@3] fb: Frame buffer memory assigned at
  885. [    1.937814@3] fb:  1, phy: 0x000000009cc00000, vir:0xffffff8008ef5000, size=1024K
  886. [    1.937814@3]
  887. [    1.937817@3] fb: logo_index=0,fb_index=1
  888. [    1.937819@3] fb: ---------------clear fb1 memory ffffff8008ef5000
  889. [    1.938233@3] fb: osd[1] canvas.idx =0x43
  890. [    1.938234@3] fb: osd[1] canvas.addr=0x9cc00000
  891. [    1.938237@3] fb: osd[1] canvas.width=128
  892. [    1.938239@3] fb: osd[1] canvas.height=32
  893. [    1.938241@3] fb: osd[1] frame.width=32
  894. [    1.938243@3] fb: osd[1] frame.height=32
  895. [    1.938245@3] fb: osd[1] out_addr_id =0x2
  896. [    1.951887@3] fb: osd_release now.index=1,open_count=1
  897. [    1.968571@3] vfm_map_store:rm default
  898. [    1.968571@3]
  899. [    1.968636@3] vfm_map_store:add default decoder ppmgr deinterlace amvideo
  900. [    1.968636@3]
  901. [    1.968703@3] fb: osd[0] enable: 1 (sh)
  902. [    1.985056@3] fb: osd[1] enable: 0 (sh)
  903. [    2.015474@2] font: no symbol version for module_layout
  904. [    2.035084@2] Console: switching to colour frame buffer device 240x67
  905. [    2.150477@0] usb 1-2: new full-speed USB device number 2 using xhci-hcd
  906. [    2.293698@0] usb 1-2: New USB device found, idVendor=046d, idProduct=c318
  907. [    2.293706@0] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  908. [    2.293710@0] usb 1-2: Product: Logitech Illuminated Keyboard
  909. [    2.293712@0] usb 1-2: Manufacturer: Logitech
  910. [    2.307468@0] input: Logitech Logitech Illuminated Keyboard as /devices/platform/ff500000.dwc3/xhci-hcd.0.auto/usb1/1-2/1-2:1.0/0003:046D:C318.0001/input/input2
  911. [    2.367087@0] hid-generic 0003:046D:C318.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech Logitech Illuminated Keyboard] on usb-xhci-hcd.0.auto-2/input0
  912. [    2.370378@0] input: Logitech Logitech Illuminated Keyboard as /devices/platform/ff500000.dwc3/xhci-hcd.0.auto/usb1/1-2/1-2:1.1/0003:046D:C318.0002/input/input3
  913. [    2.427060@0] hid-generic 0003:046D:C318.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech Logitech Illuminated Keyboard] on usb-xhci-hcd.0.auto-2/input1
  914. [    2.881586@3] EXT4-fs (mmcblk1p2): couldn't mount as ext3 due to feature incompatibilities
  915. [    2.891162@3] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null)
  916. [    3.368335@0] cgroup: cgroup2: unknown option "nsdelegate"
  917. [    3.374525@0] systemd[1]: systemd 242 running in system mode. (-PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK +SYSVINIT -UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL -XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD +IDN2 -IDN -PCRE2 default-hierarchy=hybrid)
  918. [    3.375038@0] systemd[1]: Detected architecture arm64.
  919. [    3.379198@0] systemd[1]: Set hostname to <CoreELEC>.
  920. [    3.422958@2] systemd[1]: File /usr/lib/systemd/system/systemd-journald.service:12 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling.
  921. [    3.422969@2] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.)
  922. [    3.468220@2] systemd[1]: Binding to IPv6 address not available since kernel does not support IPv6.
  923. [    3.468263@2] systemd[1]: Binding to IPv6 address not available since kernel does not support IPv6.
  924. [    3.500552@2] systemd[1]: Listening on Journal Socket.
  925. [    3.501243@2] systemd[1]: Condition check resulted in Huge Pages File System being skipped.
  926. [    3.504778@2] systemd[1]: Mounting Variable Directory...
  927. [    3.602647@0] kernel-overlays-setup: setup base modules
  928. [    3.711879@3] kernel-overlays-setup: added modules from /usr/lib/kernel-overlays/base/lib/modules/4.9.190
  929. [    3.756309@2] kernel-overlays-setup: added firmware from /usr/lib/kernel-overlays/base/lib/firmware
  930. [    3.756460@2] kernel-overlays-setup: adding overlays from /storage/.cache/kernel-overlays
  931. [    3.757681@2] kernel-overlays-setup: done
  932. [    3.904134@2] media: Linux media interface: v0.10
  933. [    3.931658@3] Linux video capture interface: v2.00
  934. [    3.957001@3] amlvid:info: amlvideo_init called
  935. [    3.957007@3] amlvid:info: amlvideo_create_instance called
  936. [    3.957013@3] amlvid:info: v4l2_dev.name=:amlvideo-000
  937. [    3.957213@3] amlvideo-000: V4L2 device registered as video10
  938. [    3.962737@3] wifi_dummy: loading out-of-tree module taints kernel.
  939. [    3.963043@3] Triggered SDIO WiFi power on and bus rescan.
  940. [    3.963067@3] aml_wifi wifi: [extern_wifi_set_enable] WIFI  Disable! 482
  941. [    4.007819@3] systemd-journald[2389]: Received request to flush runtime journal from PID 1
  942. [    4.282575@3] aml_wifi wifi: [extern_wifi_set_enable] WIFI  Enable! 482
  943. [    4.311810@0] NET: Registered protocol family 10
  944. [    4.607575@0] meson-mmc: sdio: resp_timeout,vstat:0xa1ff2800,virqc:3fff
  945. [    4.607582@0] meson-mmc: sdio: err: wait for irq service, bus_fsm:0x8
  946. [    4.607606@0] meson-mmc: meson_mmc_irq_thread_v3 600 sdio: cmd:52
  947. [    4.608725@0] meson-mmc: sdio: resp_timeout,vstat:0x9dff0800,virqc:3fff
  948. [    4.608727@0] meson-mmc: sdio: err: wait for desc write back, bus_fsm:0x7
  949. [    4.608735@0] meson-mmc: meson_mmc_irq_thread_v3 600 sdio: cmd:52
  950. [    4.613481@0] meson-mmc: sdio: resp_timeout,vstat:0xa1ff2800,virqc:3fff
  951. [    4.613486@0] meson-mmc: sdio: err: wait for irq service, bus_fsm:0x8
  952. [    4.613506@0] meson-mmc: meson_mmc_irq_thread_v3 600 sdio: cmd:8
  953. [    4.616333@3] meson-mmc: actual_clock :0, HHI_nand: 0x80
  954. [    4.616337@3] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x1000033c
  955. [    4.634487@3] meson-mmc: actual_clock :400000, HHI_nand: 0x80
  956. [    4.634494@3] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x1000033c
  957. [    4.655668@3] sdio: queuing unknown CIS tuple 0x80 (2 bytes)
  958. [    4.658875@3] sdio: queuing unknown CIS tuple 0x80 (3 bytes)
  959. [    4.662071@3] sdio: queuing unknown CIS tuple 0x80 (3 bytes)
  960. [    4.667916@3] sdio: queuing unknown CIS tuple 0x80 (7 bytes)
  961. [    4.675176@3] sdio: queuing unknown CIS tuple 0x81 (9 bytes)
  962. [    4.795826@3] meson-aml-mmc ffe05000.sd2: divider requested rate 200000000 != actual rate 199999997: ret=0
  963. [    4.795834@3] meson-mmc: actual_clock :199999997, HHI_nand: 0x80
  964. [    4.795838@3] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x10000245
  965. [    4.795842@3] meson-mmc: Data 1 aligned delay is 0
  966. [    4.795844@3] meson-mmc: sdio: clk 199999997 tuning start
  967. [    4.795878@3] meson-mmc: Tuning transfer error: nmatch=0 tuning_err:0xffffffb6
  968. [    4.796769@3] meson-mmc: sdio: rx_tuning_result[1] = 40
  969. [    4.797628@3] meson-mmc: sdio: rx_tuning_result[2] = 40
  970. [    4.800043@3] meson-mmc: sdio: rx_tuning_result[3] = 40
  971. [    4.800935@3] meson-mmc: sdio: rx_tuning_result[4] = 40
  972. [    4.800937@3] meson-mmc: sdio: best_win_start =1, best_win_size =4
  973. [    4.800941@3] meson-mmc: sdio: sd_emmc_regs->gclock=0x10000245,sd_emmc_regs->gadjust=0x32000
  974. [    4.804918@3] sdio: new ultra high speed SDR104 SDIO card at address 0001
  975. [    4.804924@1] sdio: clock 199999997, 4-bit-bus-width
  976. [    4.804924@1]
  977. [    4.805339@1] meson-mmc: [sdio_reinit] finish
  978. [    5.290179@0] fb: osd_release now.index=0,open_count=1
  979. [    5.290238@0] Console: switching to colour dummy device 80x25
  980. [    5.696217@3] Registered IR keymap rc-empty
  981. [    5.696444@3] input: meson-ir as /devices/platform/ff808040.meson-ir/rc/rc0/input4
  982. [    5.696734@1] rc rc0: meson-ir as /devices/platform/ff808040.meson-ir/rc/rc0
  983. [    5.737216@3] meson-ir ff808040.meson-ir: AO_RTI_PIN_MUX : 0x100011
  984. [    5.737228@3] meson-ir ff808040.meson-ir: receiver initialized
  985. [    5.746875@3] lirc_dev: IR Remote Control driver registered, major 494
  986. [    5.753376@0] rc rc0: lirc_dev: driver ir-lirc-codec (meson-ir) registered at minor = 0
  987. [    5.753387@0] IR LIRC bridge handler initialized
  988. [    5.822209@1] decoder registered as /dev/video26
  989. [    6.145304@1] [0] vcodec_dec decoder
  990. [    6.145608@1] [0] release decoder
  991. [    6.148644@3] dhd_module_init: in
  992. [    6.148669@3] ======== bcm_wlan_set_plat_data ========
  993. [    6.148672@3] host_oob_irq: 52
  994. [    6.148675@3] host_oob_irq_flags=0x418
  995. [    6.148677@3] dhd_wifi_platform_load: Enter
  996. [    6.148725@3] Power-up adapter 'DHD generic adapter'
  997. [    6.148728@3] wifi_platform_set_power = 1
  998. [    6.148729@3] ======== PULL WL_REG_ON HIGH! ========
  999. [    6.148758@3] aml_wifi wifi: [extern_wifi_set_enable] WIFI  Disable! 482
  1000. [    6.235112@2] IR NEC protocol handler initialized
  1001. [    6.254586@0] env not set, efuse also invalid
  1002. [    6.265987@1] meson6-dwmac ff3f0000.ethernet eth0: fail to init PTP.
  1003. [    6.266631@1] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  1004. [    6.272149@2] IR RC6 protocol handler initialized
  1005. [    6.354646@3] aml_wifi wifi: [extern_wifi_set_enable] WIFI  Enable! 482
  1006. [    6.862504@3] wifi_platform_bus_enumerate device present 1
  1007. [    6.862510@3] ======== Card detection to detect SDIO card! ========
  1008. [    6.862513@3] sdio_reset_comm():
  1009. [    6.864870@1] meson-aml-mmc ffe05000.sd2: divider requested rate 200000000 != actual rate 199999997: ret=0
  1010. [    6.864882@1] meson-mmc: actual_clock :199999997, HHI_nand: 0x80
  1011. [    6.864884@1] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x10000245
  1012. [    6.877684@1] meson-aml-mmc ffe05000.sd2: divider requested rate 200000000 != actual rate 199999997: ret=0
  1013. [    6.877693@1] meson-mmc: actual_clock :199999997, HHI_nand: 0x80
  1014. [    6.877695@1] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x10000245
  1015. [    6.878766@1] meson-mmc: actual_clock :400000, HHI_nand: 0x80
  1016. [    6.878772@1] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x1000023c
  1017. [    6.881819@1] meson-mmc: actual_clock :0, HHI_nand: 0x80
  1018. [    6.881825@1] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x1000023c
  1019. [    6.898528@1] meson-mmc: actual_clock :400000, HHI_nand: 0x80
  1020. [    6.898535@1] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x1000023c
  1021. [    6.942624@3] sdio: queuing unknown CIS tuple 0x80 (2 bytes)
  1022. [    6.945957@3] sdio: queuing unknown CIS tuple 0x80 (3 bytes)
  1023. [    6.949746@3] sdio: queuing unknown CIS tuple 0x80 (3 bytes)
  1024. [    6.955870@3] sdio: queuing unknown CIS tuple 0x80 (7 bytes)
  1025. [    6.983346@3] sdio: queuing unknown CIS tuple 0x81 (9 bytes)
  1026. [    7.093376@3] meson-aml-mmc ffe05000.sd2: divider requested rate 200000000 != actual rate 199999997: ret=0
  1027. [    7.093385@3] meson-mmc: actual_clock :199999997, HHI_nand: 0x80
  1028. [    7.093387@3] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x10000245
  1029. [    7.093392@3] meson-mmc: Data 1 aligned delay is 0
  1030. [    7.093394@3] meson-mmc: sdio: clk 199999997 tuning start
  1031. [    7.093426@3] meson-mmc: Tuning transfer error: nmatch=0 tuning_err:0xffffffac
  1032. [    7.094288@3] meson-mmc: sdio: rx_tuning_result[1] = 40
  1033. [    7.095215@1] meson-mmc: sdio: rx_tuning_result[2] = 40
  1034. [    7.096076@1] meson-mmc: sdio: rx_tuning_result[3] = 40
  1035. [    7.096963@3] meson-mmc: sdio: rx_tuning_result[4] = 40
  1036. [    7.096967@3] meson-mmc: sdio: best_win_start =1, best_win_size =4
  1037. [    7.096970@3] meson-mmc: sdio: sd_emmc_regs->gclock=0x10000245,sd_emmc_regs->gadjust=0x32000
  1038. [    7.096976@3] meson-mmc: [sdio_reinit] finish
  1039. [    7.113524@3] bcmsdh_register: register client driver
  1040. [    7.113733@3] bcmsdh_sdmmc: bcmsdh_sdmmc_probe Enter
  1041. [    7.113855@3] bcmsdh_sdmmc: bcmsdh_sdmmc_probe Enter
  1042. [    7.113857@3] bus num (host idx)=2, slot num (rca)=1
  1043. [    7.113861@3] found adapter info 'DHD generic adapter'
  1044. [    7.113917@3] sdioh_attach: set sd_f2_blocksize 256
  1045. [    7.114283@3] dhdsdio_probe : no mutex held. set lock
  1046. [    7.114397@3] F1 signature read @0x18000000=0x15264345
  1047. [    7.118493@3] F1 signature OK, socitype:0x1 chip:0x4345 rev:0x6 pkg:0x2
  1048. [    7.119120@3] DHD: dongle ram size is set to 819200(orig 819200) at 0x198000
  1049. [    7.119196@3] wifi_platform_get_mac_addr
  1050. [    7.119198@3] ======== bcm_wlan_get_mac_address ========
  1051. [    7.119200@3] custom wifi mac is not set
  1052. [    7.119209@3] dhd_conf_set_chiprev: chip=0x4345, chiprev=6
  1053. [    7.119240@3] dhd_conf_set_conf_path_by_nv_path: config_path=/usr/lib/firmware/brcm/config.txt
  1054. [    7.119428@3] dhd_os_open_image: /usr/lib/firmware/brcm/config.txt (425 bytes) open success
  1055. [    7.164721@3] dhd_conf_read_nv_by_chip: nv_by_chip_count=13
  1056. [    7.164730@3] dhd_conf_read_nv_by_chip: chip=0xa962, chiprev=0, name=nvram_ap6181.txt
  1057. [    7.164732@3] dhd_conf_read_nv_by_chip: chip=0xa962, chiprev=1, name=nvram_ap6210.txt
  1058. [    7.164735@3] dhd_conf_read_nv_by_chip: chip=0xa9a6, chiprev=0, name=nvram_ap6212.txt
  1059. [    7.164738@3] dhd_conf_read_nv_by_chip: chip=0xa9a6, chiprev=1, name=nvram_ap6212a.txt
  1060. [    7.164741@3] dhd_conf_read_nv_by_chip: chip=0xa9a6, chiprev=2, name=nvram_ap6236.txt
  1061. [    7.164743@3] dhd_conf_read_nv_by_chip: chip=0x4345, chiprev=6, name=nvram_ap6255.txt
  1062. [    7.164745@3] dhd_conf_read_nv_by_chip: chip=0x4330, chiprev=4, name=nvram_ap6330.txt
  1063. [    7.164747@3] dhd_conf_read_nv_by_chip: chip=0x4339, chiprev=1, name=nvram_ap6335.txt
  1064. [    7.164750@3] dhd_conf_read_nv_by_chip: chip=0x4354, chiprev=2, name=nvram_ap6356.txt
  1065. [    7.164753@3] dhd_conf_read_nv_by_chip: chip=0x4335, chiprev=1, name=nvram_bcm4335.txt
  1066. [    7.164756@3] dhd_conf_read_nv_by_chip: chip=0xa94c, chiprev=2, name=nvram_ap6234.txt
  1067. [    7.164760@3] dhd_conf_read_nv_by_chip: chip=0x4359, chiprev=9, name=nvram_ap6359s.txt
  1068. [    7.164762@3] dhd_conf_read_nv_by_chip: chip=0x4334, chiprev=3, name=nvram_bcm4334.txt
  1069. [    7.164820@3] dhd_conf_read_config: mimo_bw_cap = 1
  1070. [    7.165107@3] dhd_conf_read_config: bcn_timeout = 20
  1071. [    7.165208@3] dhd_conf_read_config: kso_enable = 0
  1072. [    7.165497@3] dhd_conf_read_config: PM = 0
  1073. [    7.166348@3] wl_create_event_handler(): thread:wl_event_handler:fd7 started
  1074. [    7.166350@1] tsk Enter, tsk = 0xffffffc0757e1a90
  1075. [    7.168781@3] dhd_attach(): thread:dhd_watchdog_thread:fd9 started
  1076. [    7.168824@3] dhd_attach(): thread:dhd_dpc:fda started
  1077. [    7.168889@3] dhd_attach(): thread:dhd_rxf:fdb started
  1078. [    7.168897@3] dhd_deferred_work_init: work queue initialized
  1079. [    7.189770@3] Dongle Host Driver, version 1.363.59.144.2.git (r)
  1080. [    7.190509@3] Register interface [wlan0]  MAC: 6c:21:a2:f1:aa:b0
  1081. [    7.190509@3]
  1082. [    7.190868@0] wl_event_handler: was terminated
  1083. [    7.190887@3] wl_destroy_event_handler(): thread:wl_event_handler:fd7 terminated OK
  1084. [    7.190894@3] dhd_wl_ioctl: returning as busstate=0
  1085. [    7.190982@3] bcmsdh_oob_intr_unregister: Enter
  1086. [    7.190983@3] bcmsdh_oob_intr_unregister: irq is not registered
  1087. [    7.190994@3] dhd_txglom_enable: enable 0
  1088. [    7.190996@3] dhd_conf_set_txglom_params: swtxglom=0, txglom_ext=0
  1089. [    7.190998@3] dhd_conf_set_txglom_params: txglom_bucket_size=0
  1090. [    7.191000@3] dhd_conf_set_txglom_params: txglomsize=0, deferred_tx_len=0, bus_txglom=-1
  1091. [    7.191001@3] dhd_conf_set_txglom_params: tx_in_rx=1, tx_max_offset=0
  1092. [    7.191004@3] sdioh_set_mode: set txglom_mode to multi-desc
  1093. [    7.191006@3] dhd_bus_devreset:  WLAN OFF DONE
  1094. [    7.191064@3] wifi_platform_set_power = 0
  1095. [    7.191066@3] ======== PULL WL_REG_ON LOW! ========
  1096. [    7.191070@3] dhdsdio_probe : the lock is released.
  1097. [    7.191255@3] bcmsdh_sdmmc: bcmsdh_sdmmc_probe Enter
  1098. [    7.191338@3] dhd_module_init: Exit err=0
  1099. [    7.191936@1] dhd_open: Enter ffffffc07cd34000
  1100. [    7.191950@1]
  1101. [    7.191950@1] Dongle Host Driver, version 1.363.59.144.2.git (r)
  1102. [    7.191953@1] wl_android_wifi_on in 1
  1103. [    7.191956@1] wl_android_wifi_on in 2: g_wifi_on=0
  1104. [    7.191958@1] wifi_platform_set_power = 1
  1105. [    7.191960@1] ======== PULL WL_REG_ON HIGH! ========
  1106. [    7.191981@1] aml_wifi wifi: [extern_wifi_set_enable] WIFI  Disable! 482
  1107. [    7.341632@2] meson_uart ffd24000.serial: ttyS1 use xtal(24M) 24000000 change 0 to 9600
  1108. [    7.341690@2] meson_uart ffd24000.serial: ttyS1 use xtal(24M) 24000000 change 9600 to 9600
  1109. [    7.341705@2] meson_uart ffd24000.serial: ttyS1 use xtal(24M) 24000000 change 9600 to 115200
  1110. [    7.397496@1] aml_wifi wifi: [extern_wifi_set_enable] WIFI  Enable! 482
  1111. [    7.902446@1] sdio_reset_comm():
  1112. [    7.902496@1] meson-aml-mmc ffe05000.sd2: divider requested rate 200000000 != actual rate 199999997: ret=0
  1113. [    7.902501@1] meson-mmc: actual_clock :199999997, HHI_nand: 0x80
  1114. [    7.902503@1] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x10000245
  1115. [    7.904617@1] meson-aml-mmc ffe05000.sd2: divider requested rate 200000000 != actual rate 199999997: ret=0
  1116. [    7.904622@1] meson-mmc: actual_clock :199999997, HHI_nand: 0x80
  1117. [    7.904626@1] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x10000245
  1118. [    7.905672@1] meson-mmc: actual_clock :400000, HHI_nand: 0x80
  1119. [    7.905673@1] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x1000023c
  1120. [    7.908607@1] meson-mmc: actual_clock :0, HHI_nand: 0x80
  1121. [    7.908611@1] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x1000023c
  1122. [    7.926481@1] meson-mmc: actual_clock :400000, HHI_nand: 0x80
  1123. [    7.926485@1] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x1000023c
  1124. [    8.073315@1] meson-aml-mmc ffe05000.sd2: divider requested rate 200000000 != actual rate 199999997: ret=0
  1125. [    8.073321@1] meson-mmc: actual_clock :199999997, HHI_nand: 0x80
  1126. [    8.073324@1] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x10000245
  1127. [    8.073327@1] meson-mmc: Data 1 aligned delay is 0
  1128. [    8.073330@1] meson-mmc: sdio: clk 199999997 tuning start
  1129. [    8.073364@1] meson-mmc: Tuning transfer error: nmatch=0 tuning_err:0xffffffac
  1130. [    8.074258@1] meson-mmc: sdio: rx_tuning_result[1] = 40
  1131. [    8.075209@1] meson-mmc: sdio: rx_tuning_result[2] = 40
  1132. [    8.076097@1] meson-mmc: sdio: rx_tuning_result[3] = 40
  1133. [    8.076974@1] meson-mmc: sdio: rx_tuning_result[4] = 40
  1134. [    8.076979@1] meson-mmc: sdio: best_win_start =1, best_win_size =4
  1135. [    8.076982@1] meson-mmc: sdio: sd_emmc_regs->gclock=0x10000245,sd_emmc_regs->gadjust=0x32000
  1136. [    8.077037@1] sdioh_start: set sd_f2_blocksize 256
  1137. [    8.077359@1]
  1138. [    8.077359@1]
  1139. [    8.077359@1] dhd_bus_devreset: == WLAN ON ==
  1140. [    8.077460@1] F1 signature read @0x18000000=0x15264345
  1141. [    8.080595@1] F1 signature OK, socitype:0x1 chip:0x4345 rev:0x6 pkg:0x2
  1142. [    8.081197@1] DHD: dongle ram size is set to 819200(orig 819200) at 0x198000
  1143. [    8.081507@1] dhd_os_open_image: /usr/lib/firmware/brcm/config.txt (425 bytes) open success
  1144. [    8.081862@1] dhd_conf_read_nv_by_chip: nv_by_chip_count=13
  1145. [    8.081868@1] dhd_conf_read_nv_by_chip: chip=0xa962, chiprev=0, name=nvram_ap6181.txt
  1146. [    8.081870@1] dhd_conf_read_nv_by_chip: chip=0xa962, chiprev=1, name=nvram_ap6210.txt
  1147. [    8.081874@1] dhd_conf_read_nv_by_chip: chip=0xa9a6, chiprev=0, name=nvram_ap6212.txt
  1148. [    8.081876@1] dhd_conf_read_nv_by_chip: chip=0xa9a6, chiprev=1, name=nvram_ap6212a.txt
  1149. [    8.081879@1] dhd_conf_read_nv_by_chip: chip=0xa9a6, chiprev=2, name=nvram_ap6236.txt
  1150. [    8.081882@1] dhd_conf_read_nv_by_chip: chip=0x4345, chiprev=6, name=nvram_ap6255.txt
  1151. [    8.081887@1] dhd_conf_read_nv_by_chip: chip=0x4330, chiprev=4, name=nvram_ap6330.txt
  1152. [    8.081891@1] dhd_conf_read_nv_by_chip: chip=0x4339, chiprev=1, name=nvram_ap6335.txt
  1153. [    8.081894@1] dhd_conf_read_nv_by_chip: chip=0x4354, chiprev=2, name=nvram_ap6356.txt
  1154. [    8.081897@1] dhd_conf_read_nv_by_chip: chip=0x4335, chiprev=1, name=nvram_bcm4335.txt
  1155. [    8.081901@1] dhd_conf_read_nv_by_chip: chip=0xa94c, chiprev=2, name=nvram_ap6234.txt
  1156. [    8.081904@1] dhd_conf_read_nv_by_chip: chip=0x4359, chiprev=9, name=nvram_ap6359s.txt
  1157. [    8.081906@1] dhd_conf_read_nv_by_chip: chip=0x4334, chiprev=3, name=nvram_bcm4334.txt
  1158. [    8.081967@1] dhd_conf_read_config: mimo_bw_cap = 1
  1159. [    8.082255@1] dhd_conf_read_config: bcn_timeout = 20
  1160. [    8.082358@1] dhd_conf_read_config: kso_enable = 0
  1161. [    8.082668@1] dhd_conf_read_config: PM = 0
  1162. [    8.082819@1] dhd_conf_set_fw_name_by_chip: firmware_path=/usr/lib/firmware/brcm/fw_bcm43455c0_ag.bin
  1163. [    8.082822@1] dhd_conf_set_nv_name_by_chip: nvram_path=/usr/lib/firmware/brcm/nvram_ap6255.txt
  1164. [    8.082825@1] dhdsdio_download_firmware: set use_rxchain 0
  1165. [    8.082826@1] dhdsdio_download_firmware: set txglomsize 36
  1166. [    8.082829@1] Final fw_path=/usr/lib/firmware/brcm/fw_bcm43455c0_ag.bin
  1167. [    8.082830@1] Final nv_path=/usr/lib/firmware/brcm/nvram_ap6255.txt
  1168. [    8.082832@1] Final conf_path=/usr/lib/firmware/brcm/config.txt
  1169. [    8.083298@1] dhd_os_open_image: /usr/lib/firmware/brcm/fw_bcm43455c0_ag.bin (483181 bytes) open success
  1170. [    8.155935@2] dhd_os_open_image: /usr/lib/firmware/brcm/nvram_ap6255.txt (1644 bytes) open success
  1171. [    8.155983@2] NVRAM version: AP6255_NVRAM_V1.0_29052015
  1172. [    8.156427@2] dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded.
  1173. [    8.234390@2] dhd_bus_init: enable 0x06, ready 0x06 (waited 0us)
  1174. [    8.234739@2] bcmsdh_oob_intr_register: Enter
  1175. [    8.234741@2] bcmsdh_oob_intr_register: HW_OOB enabled
  1176. [    8.234743@2] bcmsdh_oob_intr_register OOB irq=52 flags=0x418
  1177. [    8.234746@2] bcmsdh_oob_intr_register change flags to 0x8
  1178. [    8.234788@2] bcmsdh_oob_intr_register: disable_irq_wake
  1179. [    8.236073@2] Disable tdls_auto_op failed. -1
  1180. [    8.236077@2] dhd_conf_set_fw_int_cmd: set WLC_SET_BAND 142 0
  1181. [    8.236255@2] dhd_preinit_ioctls: Set tcpack_sup_mode 0
  1182. [    8.236271@2] wifi_platform_get_mac_addr
  1183. [    8.236273@2] ======== bcm_wlan_get_mac_address ========
  1184. [    8.236274@2] custom wifi mac is not set
  1185. [    8.238045@2] Firmware up: op_mode=0x0005, MAC=6c:21:a2:f1:aa:b0
  1186. [    8.238049@2] dhd_conf_set_country: set country SG, revision 0
  1187. [    8.277540@2] Country code: SG (SG/0)
  1188. [    8.277856@2] dhd_conf_set_fw_string_cmd: set roam_off 1
  1189. [    8.280200@2] dhd_conf_set_fw_string_cmd: set mimo_bw_cap 1
  1190. [    8.286281@2] Firmware version = wl0: Aug 25 2015 18:58:57 version 7.45.69 (r581703) FWID 01-24037f6e
  1191. [    8.286286@2]   Driver: 1.363.59.144.2.git (r)
  1192. [    8.286286@2]   Firmware: wl0: Aug 25 2015 18:58:57 version 7.45.69 (r581703) FWID 01-24037f6e
  1193. [    8.286674@2] dhd_txglom_enable: enable 1
  1194. [    8.286677@2] dhd_conf_set_txglom_params: swtxglom=0, txglom_ext=0
  1195. [    8.286680@2] dhd_conf_set_txglom_params: txglom_bucket_size=0
  1196. [    8.286683@2] dhd_conf_set_txglom_params: txglomsize=36, deferred_tx_len=36, bus_txglom=-1
  1197. [    8.286685@2] dhd_conf_set_txglom_params: tx_in_rx=1, tx_max_offset=0
  1198. [    8.286688@2] sdioh_set_mode: set txglom_mode to multi-desc
  1199. [    8.286690@2] dhd_conf_set_disable_proptx: set disable_proptx 0
  1200. [    8.287163@2] wl_android_wifi_on: Success
  1201. [    8.287853@2] wl_create_event_handler(): thread:wl_event_handler:fef started
  1202. [    8.287858@1] tsk Enter, tsk = 0xffffffc0757e1a90
  1203. [    8.323970@0] wl_host_event: Invalid ifidx 0 for wl0
  1204. [    8.324178@0] wl_host_event: Invalid ifidx 0 for wl0
  1205. [    8.327529@2] CFG80211-ERROR) wl_update_wiphybands : error reading txbf_bfe_cap (-23)
  1206. [    8.328021@2] CFG80211-ERROR) wl_update_wiphybands : error reading txbf_bfr_cap (-23)
  1207. [    8.346475@2] dhd_open: Exit ret=0
  1208. [    8.463338@0] OpenVFD: Version: V1.3.0
  1209. [    8.463348@0] OpenVFD: vfd_gpio_clk:         #0 = 0x01; #1 = 0x06; #2 = 0x10;
  1210. [    8.463351@0] OpenVFD: vfd_gpio_dat:         #0 = 0x01; #1 = 0x07; #2 = 0x10;
  1211. [    8.463354@0] OpenVFD: vfd_gpio_stb:         #0 = 0x00; #1 = 0x00; #2 = 0xFF;
  1212. [    8.463357@0] OpenVFD: vfd_gpio0:            #0 = 0x00; #1 = 0x00; #2 = 0xFF;
  1213. [    8.463360@0] OpenVFD: vfd_gpio1:            #0 = 0x00; #1 = 0x00; #2 = 0xFF;
  1214. [    8.463363@0] OpenVFD: vfd_gpio2:            #0 = 0x00; #1 = 0x00; #2 = 0xFF;
  1215. [    8.463366@0] OpenVFD: vfd_gpio3:            #0 = 0x00; #1 = 0x00; #2 = 0xFF;
  1216. [    8.463369@0] OpenVFD: vfd_gpio_protocol:    #0 = 0x00; #1 = 0x00;
  1217. [    8.463372@0] OpenVFD: vfd_chars:            #0 = 0x00; #1 = 0x01; #2 = 0x02; #3 = 0x03; #4 = 0x04;
  1218. [    8.463377@0] OpenVFD: vfd_dot_bits:         #0 = 0x00; #1 = 0x01; #2 = 0x02; #3 = 0x03; #4 = 0x04; #5 = 0x05; #6 = 0x06;
  1219. [    8.463380@0] OpenVFD: vfd_display_type:     #0 = 0x01; #1 = 0x00; #2 = 0x00; #3 = 0x06;
  1220. [    8.463385@0] OpenVFD: Detected gpio chips:  periphs-banks, aobus-banks.
  1221. [    8.463391@0] OpenVFD: "aobus-banks" chip found.     base = 496, pin count = 16, pin = 6, offset = 502
  1222. [    8.463393@0] OpenVFD: "aobus-banks" chip found.     base = 496, pin count = 16, pin = 7, offset = 503
  1223. [    8.463395@0] OpenVFD: Skipping vfd_gpio_stb evaluation (0xFF)
  1224. [    8.463396@0] OpenVFD: Skipping vfd_gpio0 evaluation (0xFF)
  1225. [    8.463398@0] OpenVFD: Skipping vfd_gpio1 evaluation (0xFF)
  1226. [    8.463399@0] OpenVFD: Skipping vfd_gpio2 evaluation (0xFF)
  1227. [    8.463400@0] OpenVFD: Skipping vfd_gpio3 evaluation (0xFF)
  1228. [    8.463708@0] OpenVFD: Select FD6551 controller
  1229. [    8.463776@0] OpenVFD: SW I2C interface intialized (address = 0x0000 (N/A), MSB mode, pull-ups on)
  1230. [    8.621618@3] Connecting with 6c:3b:6b:c2:9e:de ssid "AISMAN", len (6) channel=52
  1231. [    8.621618@3]
  1232. [    8.788537@2] wl_iw_event: Link UP with BSSID=6c:3b:6b:c2:9e:de
  1233. [    8.788614@3] wl_bss_connect_done succeeded with 6c:3b:6b:c2:9e:de
  1234. [    8.894496@3] wl_bss_connect_done succeeded with 6c:3b:6b:c2:9e:de
  1235. [   10.325147@0] the demux           clock on, ref cnt: 1
  1236. [   10.325157@0] the parser_top      clock on, ref cnt: 1
  1237. [   10.325160@0] the vdec            clock on, ref cnt: 1
  1238. [   10.325181@0] the clk_hevc_mux    clock on, ref cnt: 1
  1239. [   10.325185@0] the clk_hevcb_mux   clock on, ref cnt: 1
  1240. [   10.325275@0] hevc mux clock is 499999992 Hz
  1241. [   10.325299@0] hevc back mux clock is 499999992 Hz
  1242. [   10.325327@0] the clk_vdec_mux    clock on, ref cnt: 1
  1243. [   10.325351@0] vdec mux clock is 499999992 Hz
  1244. [   10.325419@0] vdec_create instance ffffff800ffe4000, total 1
  1245. [   10.325429@0] vdec_release instance ffffff800ffe4000, total 1
  1246. [   10.325448@0] the clk_hevc_mux    clock off, ref cnt: 0
  1247. [   10.325450@0] the clk_hevcb_mux   clock off, ref cnt: 0
  1248. [   10.325465@0] the clk_vdec_mux    clock off, ref cnt: 0
  1249. [   10.325469@0] the vdec            clock off, ref cnt: 0
  1250. [   10.325473@0] the parser_top      clock off, ref cnt: 0
  1251. [   10.325476@0] the demux           clock off, ref cnt: 0
  1252. [   10.779828@3] audio_ddr_mngr: frddrs[0] registered by device ff642000.audiobus:tdmb
  1253. [   10.781070@3] tdm playback mute: 1, lane_cnt = 4
  1254. [   10.781123@3] audio_ddr_mngr: frddrs[0] released by device ff642000.audiobus:tdmb
  1255. [   10.781731@3] audio_ddr_mngr: frddrs[0] registered by device ff642000.audiobus:tdmb
  1256. [   10.782775@3] tdm playback mute: 1, lane_cnt = 4
  1257. [   10.782830@3] audio_ddr_mngr: frddrs[0] released by device ff642000.audiobus:tdmb
  1258. [   10.783488@3] audio_ddr_mngr: frddrs[0] registered by device ff642000.audiobus:tdmc
  1259. [   10.783811@3] tdm playback mute: 1, lane_cnt = 4
  1260. [   10.783854@3] audio_ddr_mngr: frddrs[0] released by device ff642000.audiobus:tdmc
  1261. [   10.784434@3] audio_ddr_mngr: frddrs[0] registered by device ff642000.audiobus:tdmc
  1262. [   10.784647@3] tdm playback mute: 1, lane_cnt = 4
  1263. [   10.784679@3] audio_ddr_mngr: frddrs[0] released by device ff642000.audiobus:tdmc
  1264. [   10.785227@3] audio_ddr_mngr: frddrs[0] registered by device ff642000.audiobus:tdmc
  1265. [   10.785526@3] tdm playback mute: 1, lane_cnt = 4
  1266. [   10.785568@3] audio_ddr_mngr: frddrs[0] released by device ff642000.audiobus:tdmc
  1267. [   10.803915@3] audio_ddr_mngr: frddrs[0] registered by device ff642000.audiobus:tdmb
  1268. [   10.805371@3] tdm playback mute: 1, lane_cnt = 4
  1269. [   10.805440@3] audio_ddr_mngr: frddrs[0] released by device ff642000.audiobus:tdmb
  1270. [   10.806073@3] audio_ddr_mngr: frddrs[0] registered by device ff642000.audiobus:tdmc
  1271. [   10.807313@3] tdm playback mute: 1, lane_cnt = 4
  1272. [   10.807378@3] audio_ddr_mngr: frddrs[0] released by device ff642000.audiobus:tdmc
  1273. [   10.808044@3] spdif_a keep clk continuous
  1274. [   10.808047@3] aml_spdif_open
  1275. [   10.808170@3] audio_ddr_mngr: frddrs[0] registered by device ff642000.audiobus:spdif
  1276. [   10.808648@3] spdif_a keep clk continuous
  1277. [   10.808653@3] aml_spdif_close
  1278. [   10.808693@3] audio_ddr_mngr: frddrs[0] released by device ff642000.audiobus:spdif
  1279. [   10.809229@3] spdif_b keep clk continuous
  1280. [   10.809230@3] aml_spdif_open
  1281. [   10.809322@3] audio_ddr_mngr: frddrs[0] registered by device ff642000.audiobus:spdif_b
  1282. [   10.810394@3] spdif_b keep clk continuous
  1283. [   10.810399@3] aml_spdif_close
  1284. [   10.810476@3] audio_ddr_mngr: frddrs[0] released by device ff642000.audiobus:spdif_b
  1285. [   10.818644@2] audio_dsp: buf=0
  1286. [   10.818653@2] audio_dsp: IEC958_mode_raw=0
  1287. [   10.818689@2] audio_dsp: IEC958_mode_codec= 0, IEC958 type 2 CH PCM
  1288. [   10.818691@2] audio_dsp: last mode 0,now 0
  1289. [   10.823238@2] spdif_b keep clk continuous
  1290. [   10.823244@2] aml_spdif_open
  1291. [   10.823420@2] audio_ddr_mngr: frddrs[0] registered by device ff642000.audiobus:spdif_b
  1292. [   10.824231@2] set normal 512 fs /4 fs
  1293. [   10.824257@2]         set spdifout clk:5644800, mpll:22579200
  1294. [   10.824260@2]         get spdifout clk:5644797, mpll:22579186
  1295. [   10.824262@2] aml_dai_set_spdif_fmt , fmt 0x4010
  1296. [   10.824265@2] set normal 512 fs /4 fs
  1297. [   10.824275@2]         set spdifout clk:5644800, mpll:22579200
  1298. [   10.824276@2]         get spdifout clk:5644797, mpll:22579186
  1299. [   10.824359@2] spdif_info: rate: 44100, channel status ch0_l:0x100, ch0_r:0x100, ch1_l:0x0, ch1_r:0x0
  1300. [   10.824366@2] hdmitx: err chn setting, must be 2, 4, 6 or 8, Rst as def
  1301. [   10.824369@2] hdmitx: hw: set audio
  1302. [   10.824373@2] hdmitx: hw: hdmitx tx_aud_src = 0, audio_param->channel_num = 1, hdev->aud_output_ch = 0
  1303. [   10.824388@2] hdmitx: fs = 3, cd = 4, tmds_clk = 148352
  1304. [   10.824390@2] hdmitx: hw: aud_n_para = 5824
  1305. [   10.824401@2] hdmitx: hw: set channel status
  1306. [   10.824432@2] hdmitx: audio: Audio Type: PCM
  1307. [   10.824433@2] hdmitx: err chn msk, must larger than 0
  1308. [   10.824437@2] hdmitx: hw: set audio
  1309. [   10.824438@2] hdmitx: hw: hdmitx tx_aud_src = 0, audio_param->channel_num = 1, hdev->aud_output_ch = 0
  1310. [   10.824450@2] hdmitx: fs = 2, cd = 4, tmds_clk = 148352
  1311. [   10.824451@2] hdmitx: hw: aud_n_para = 8918
  1312. [   10.824459@2] hdmitx: hw: set channel status
  1313. [   10.824487@2] hdmitx: audio: Audio Type: PCM
  1314. [   10.824490@2] hdmitx: audio: set audio param
  1315. [   10.824494@2] aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1
  1316. [   10.850612@2] spdif_info: rate: 44100, channel status ch0_l:0x100, ch0_r:0x100, ch1_l:0x0, ch1_r:0x0
  1317. [   10.850621@2] hdmitx: err chn setting, must be 2, 4, 6 or 8, Rst as def
  1318. [   10.850623@2] hdmitx: err chn msk, must larger than 0
  1319. [   10.850629@2] aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1
  1320. [   10.852233@2] spdif_b keep clk continuous
  1321. [   10.852245@2] aml_spdif_close
  1322. [   10.852378@2] audio_ddr_mngr: frddrs[0] released by device ff642000.audiobus:spdif_b
  1323. [   10.910622@2] fb: osd_release now.index=0,open_count=1
  1324. [   10.932534@0] fb: malloc_osd_memory, cma:ffffff800abc7670
  1325. [   10.932543@0] fb: malloc_osd_memory, 1283, base:0x0000000077800000, size:8388608
  1326. [   10.932545@0] fb: use ion buffer for fb memory, fb_index=2
  1327. [   10.933534@0] meson-fb meson-fb: create ion_client ffffffc0655dbd80, handle=ffffffc056faddc0
  1328. [   10.933539@0] meson-fb meson-fb: ion memory(2): created fb at 0x000000009cd00000, size 1 MiB
  1329. [   10.933541@0] fb: Frame buffer memory assigned at
  1330. [   10.933545@0] fb:  2, phy: 0x000000009cd00000, vir:0xffffff801002e000, size=1024K
  1331. [   10.933545@0]
  1332. [   10.933548@0] fb: logo_index=0,fb_index=2
  1333. [   10.933551@0] fb: ---------------clear fb2 memory ffffff801002e000
  1334. [   10.934022@0] fb: osd[2] canvas.idx =0x41
  1335. [   10.934024@0] fb: osd[2] canvas.addr=0x9cd00000
  1336. [   10.934027@0] fb: osd[2] canvas.width=128
  1337. [   10.934028@0] fb: osd[2] canvas.height=32
  1338. [   10.934031@0] fb: osd[2] frame.width=32
  1339. [   10.934032@0] fb: osd[2] frame.height=32
  1340. [   10.934035@0] fb: osd[2] out_addr_id =0x3
  1341. [   10.944181@0] fb: vpu clkc clock is 199 MHZ
  1342. [   10.944193@0] vpu: switch_vpu_mem_pd: unsupport vpu mod: 53
  1343. [   10.944198@0] fb: malloc_osd_memory, cma:ffffff800abc7670
  1344. [   10.944203@0] fb: malloc_osd_memory, 1283, base:0x0000000077800000, size:8388608
  1345. [   10.944205@0] fb: use ion buffer for fb memory, fb_index=3
  1346. [   10.947942@0] meson-fb meson-fb: create ion_client ffffffc0655dbd80, handle=ffffffc07ce6bfc0
  1347. [   10.947951@0] meson-fb meson-fb: ion memory(3): created fb at 0x000000009ce00000, size 8 MiB
  1348. [   10.947954@0] fb: Frame buffer memory assigned at
  1349. [   10.947958@0] fb:  3, phy: 0x000000009ce00000, vir:0xffffff801012f000, size=8192K
  1350. [   10.947958@0]
  1351. [   10.947961@0] fb: logo_index=0,fb_index=3
  1352. [   10.947964@0] fb: ---------------clear fb3 memory ffffff801012f000
  1353. [   10.953250@0] fb: osd[3] canvas.idx =0x42
  1354. [   10.953255@0] fb: osd[3] canvas.addr=0x9ce00000
  1355. [   10.953256@0] fb: osd[3] canvas.width=128
  1356. [   10.953258@0] fb: osd[3] canvas.height=32
  1357. [   10.953260@0] fb: osd[3] frame.width=32
  1358. [   10.953262@0] fb: osd[3] frame.height=32
  1359. [   10.953264@0] fb: osd[3] out_addr_id =0x4
  1360. [   10.964589@0] vout: vmode set to null
  1361. [   10.964769@0] fb: current vmode=1080p60hz, cmd: 0x10000
  1362. [   10.964774@0] vlock: event MODE_CHANGE_PRE 0
  1363. [   10.964826@0] vout: new mode null set ok
  1364. [   10.964829@0] fb: current vmode=null, cmd: 0x20000
  1365. [   10.964930@0] hdmitx: system: set frac_rate_policy as 1
  1366. [   10.964949@0] vout: vmode set to 1080p60hz
  1367. [   10.965012@0] fb: current vmode=null, cmd: 0x10000
  1368. [   10.965018@0] hdmitx: hdmitx_set_current_vmode[3679]
  1369. [   10.965020@0] hdmitx: system: recalc before 1080p60hz 2997 50
  1370. [   10.965023@0] hdmitx: system: recalc after 1080p60hz 2997 50
  1371. [   10.965028@0] hdmitx: system: get current mode: 1080p60hz
  1372. [   10.965030@0] hdmitx: system: update rx hdr info 0
  1373. [   10.965032@0] hdmitx: system: update physcial size: 1600 900
  1374. [   10.965063@0] hdmitx: video: already init VIC = 0  Now VIC = 16
  1375. [   10.965068@0] hdmitx: hw: div40: 0
  1376. [   10.992447@0] hdmitx: ddc w1b error 0x54 0x20 0x00
  1377. [   10.992460@0] hdmitx: frac_rate = 1
  1378. [   10.992462@0] hdmitx: hdmitx: set clk: VIC = 16  cd = 4  cs = 2 frac_rate = 1
  1379. [   10.992468@0] hdmitx: config HPLL = 5940000 frac_rate = 1
  1380. [   10.992524@0] hdmitx: HPLLv1: 0xdb3a04f7
  1381. [   10.992525@0] hdmitx: config HPLL done
  1382. [   10.992532@0] hdmitx: set_hpll_od3_clk_div[610] div = 6
  1383. [   10.992538@0] hdmitx: j = 4  vid_clk_div = 1
  1384. [   10.992544@0] hdmitx: set enc for VIC: 16
  1385. [   10.996449@0] hdmitx: hw:  config hdmitx IP vic = 16 cd:4 cs: 2
  1386. [   11.126450@0] hdmitx: video: Sink is HDMI device
  1387. [   11.126478@0] hdmitx: hw: set audio
  1388. [   11.126486@0] hdmitx: hw: hdmitx tx_aud_src = 0, audio_param->channel_num = 1, hdev->aud_output_ch = 0
  1389. [   11.126499@0] hdmitx: fs = 2, cd = 4, tmds_clk = 148352
  1390. [   11.126501@0] hdmitx: hw: aud_n_para = 8918
  1391. [   11.126510@0] hdmitx: hw: set channel status
  1392. [   11.126541@0] hdmitx: audio: Audio Type: PCM
  1393. [   11.126546@0] vout: new mode 1080p60hz set ok
  1394. [   11.126550@0] fb: current vmode=1080p60hz, cmd: 0x20000
  1395. [   11.126558@0] fb: osd_update_disp_axis_hw:pan_data(0,0,1919,1079)
  1396. [   11.126561@0] fb: osd_update_disp_axis_hw:dispdata(0,0,1919,1079)
  1397. [   11.140101@0] fb: osd_update_disp_axis_hw:pan_data(0,0,31,31)
  1398. [   11.140104@0] fb: osd_update_disp_axis_hw:dispdata(0,0,31,31)
  1399. [   11.156774@0] fb: osd_update_disp_axis_hw:pan_data(0,0,31,31)
  1400. [   11.156775@0] fb: osd_update_disp_axis_hw:dispdata(0,0,31,31)
  1401. [   11.173459@0] vlock: event MODE_CHANGE
  1402. [   11.191263@2] audio_dsp: buf=0
  1403. [   11.191272@2] audio_dsp: IEC958_mode_raw=0
  1404. [   11.191310@2] audio_dsp: IEC958_mode_codec= 0, IEC958 type 2 CH PCM
  1405. [   11.191312@2] audio_dsp: last mode 0,now 0
  1406. [   11.195761@2] spdif_b keep clk continuous
  1407. [   11.195767@2] aml_spdif_open
  1408. [   11.195942@2] audio_ddr_mngr: frddrs[0] registered by device ff642000.audiobus:spdif_b
  1409. [   11.202492@2] set normal 512 fs /4 fs
  1410. [   11.202532@2]         set spdifout clk:5644800, mpll:22579200
  1411. [   11.202535@2]         get spdifout clk:5644797, mpll:22579186
  1412. [   11.202539@2] aml_dai_set_spdif_fmt , fmt 0x4010
  1413. [   11.202542@2] set normal 512 fs /4 fs
  1414. [   11.202550@2]         set spdifout clk:5644800, mpll:22579200
  1415. [   11.202551@2]         get spdifout clk:5644797, mpll:22579186
  1416. [   11.202624@2] spdif_info: rate: 44100, channel status ch0_l:0x100, ch0_r:0x100, ch1_l:0x0, ch1_r:0x0
  1417. [   11.202632@2] hdmitx: err chn setting, must be 2, 4, 6 or 8, Rst as def
  1418. [   11.202634@2] hdmitx: err chn msk, must larger than 0
  1419. [   11.202640@2] aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1
  1420. [   11.202791@2] spdif_info: rate: 44100, channel status ch0_l:0x100, ch0_r:0x100, ch1_l:0x0, ch1_r:0x0
  1421. [   11.202795@2] hdmitx: err chn setting, must be 2, 4, 6 or 8, Rst as def
  1422. [   11.202796@2] hdmitx: err chn msk, must larger than 0
  1423. [   11.202799@2] aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1
  1424. [   11.203986@2] spdif_b keep clk continuous
  1425. [   11.203998@2] aml_spdif_close
  1426. [   11.204108@2] audio_ddr_mngr: frddrs[0] released by device ff642000.audiobus:spdif_b
  1427. [   11.258467@3] vout: aml_tvout_mode_work: monitor_timeout
  1428. [   11.740402@2] vout: vmode set to null
  1429. [   11.740493@2] fb: current vmode=1080p60hz, cmd: 0x10000
  1430. [   11.740497@2] vlock: event MODE_CHANGE_PRE 0
  1431. [   11.740556@2] vout: new mode null set ok
  1432. [   11.740558@2] fb: current vmode=null, cmd: 0x20000
  1433. [   11.740639@2] hdmitx: system: set frac_rate_policy as 1
  1434. [   11.740659@2] vout: vmode set to 1080p60hz
  1435. [   11.740687@2] fb: current vmode=null, cmd: 0x10000
  1436. [   11.740693@2] hdmitx: hdmitx_set_current_vmode[3679]
  1437. [   11.740695@2] hdmitx: system: recalc before 1080p60hz 2997 50
  1438. [   11.740698@2] hdmitx: system: recalc after 1080p60hz 2997 50
  1439. [   11.740706@2] hdmitx: hdmitx: display colourdepth was 8 in cur_param 0xffffff800aa632c0 (VIC: 16)
  1440. [   11.740707@2] hdmitx: system: get current mode: 1080p60hz
  1441. [   11.740710@2] hdmitx: system: update rx hdr info 0
  1442. [   11.740712@2] hdmitx: system: update physcial size: 1600 900
  1443. [   11.740721@2] hdmitx: hdmitx: display colourdepth is 10 in cur_param 0xffffff800aa632c0 (VIC: 16)
  1444. [   11.740723@2] hdmitx: Bitdepth is set to 10 bits but display does not support deep colour
  1445. [   11.740748@2] hdmitx: video: already init VIC = 0  Now VIC = 16
  1446. [   11.740752@2] hdmitx: hw: div40: 0
  1447. [   11.766668@0] hdmitx: system: irq 80000001 0
  1448. [   11.768451@2] hdmitx: ddc w1b error 0x54 0x20 0x00
  1449. [   11.768459@2] hdmitx: frac_rate = 1
  1450. [   11.768461@2] hdmitx: hdmitx: set clk: VIC = 16  cd = 4  cs = 2 frac_rate = 1
  1451. [   11.768468@2] hdmitx: config HPLL = 5940000 frac_rate = 1
  1452. [   11.768524@2] hdmitx: HPLLv1: 0xdb3a04f7
  1453. [   11.768525@2] hdmitx: config HPLL done
  1454. [   11.768532@2] hdmitx: set_hpll_od3_clk_div[610] div = 6
  1455. [   11.768540@2] hdmitx: j = 4  vid_clk_div = 1
  1456. [   11.768547@2] hdmitx: set enc for VIC: 16
  1457. [   11.768560@0] hdmitx: system: irq 80000001 0
  1458. [   11.771563@2] hdmitx: hw:  config hdmitx IP vic = 16 cd:4 cs: 2
  1459. [   11.870460@2] hdmitx: [0x10000104]: 0x00000001
  1460. [   11.870469@2] hdmitx: [0x10000180]: 0x000000ff
  1461. [   11.870472@2] hdmitx: [0x10000181]: 0x000000ff
  1462. [   11.870475@2] hdmitx: [0x10000182]: 0x00000003
  1463. [   11.870478@2] hdmitx: [0x10000183]: 0x00000007
  1464. [   11.870481@2] hdmitx: [0x10000184]: 0x0000003f
  1465. [   11.870484@2] hdmitx: [0x10000185]: 0x00000002
  1466. [   11.870487@2] hdmitx: [0x10000187]: 0x000000ff
  1467. [   11.870489@2] hdmitx: [0x10000188]: 0x00000003
  1468. [   11.902446@2] hdmitx: video: Sink is HDMI device
  1469. [   11.902471@2] hdmitx: hw: set audio
  1470. [   11.902478@2] hdmitx: hw: hdmitx tx_aud_src = 0, audio_param->channel_num = 1, hdev->aud_output_ch = 0
  1471. [   11.902492@2] hdmitx: fs = 2, cd = 4, tmds_clk = 148352
  1472. [   11.902496@2] hdmitx: hw: aud_n_para = 8918
  1473. [   11.902505@2] hdmitx: hw: set channel status
  1474. [   11.902537@2] hdmitx: audio: Audio Type: PCM
  1475. [   11.902542@2] vout: new mode 1080p60hz set ok
  1476. [   11.902546@2] fb: current vmode=1080p60hz, cmd: 0x20000
  1477. [   11.902555@2] fb: osd_update_disp_axis_hw:pan_data(0,0,1919,1079)
  1478. [   11.902559@2] fb: osd_update_disp_axis_hw:dispdata(0,0,1919,1079)
  1479. [   11.915178@2] fb: osd_update_disp_axis_hw:pan_data(0,0,31,31)
  1480. [   11.915180@2] fb: osd_update_disp_axis_hw:dispdata(0,0,31,31)
  1481. [   11.931867@2] fb: osd_update_disp_axis_hw:pan_data(0,0,31,31)
  1482. [   11.931869@2] fb: osd_update_disp_axis_hw:dispdata(0,0,31,31)
  1483. [   11.948547@2] vlock: event MODE_CHANGE
  1484. [   11.966348@2] audio_dsp: buf=0
  1485. [   11.966358@2] audio_dsp: IEC958_mode_raw=0
  1486. [   11.966395@2] audio_dsp: IEC958_mode_codec= 0, IEC958 type 2 CH PCM
  1487. [   11.966397@2] audio_dsp: last mode 0,now 0
  1488. [   11.970730@2] spdif_b keep clk continuous
  1489. [   11.970738@2] aml_spdif_open
  1490. [   11.982531@0] audio_ddr_mngr: frddrs[0] registered by device ff642000.audiobus:spdif_b
  1491. [   11.983461@0] set normal 512 fs /4 fs
  1492. [   11.983499@0]         set spdifout clk:5644800, mpll:22579200
  1493. [   11.983502@0]         get spdifout clk:5644797, mpll:22579186
  1494. [   11.983506@0] aml_dai_set_spdif_fmt , fmt 0x4010
  1495. [   11.983510@0] set normal 512 fs /4 fs
  1496. [   11.983517@0]         set spdifout clk:5644800, mpll:22579200
  1497. [   11.983519@0]         get spdifout clk:5644797, mpll:22579186
  1498. [   11.983579@0] spdif_info: rate: 44100, channel status ch0_l:0x100, ch0_r:0x100, ch1_l:0x0, ch1_r:0x0
  1499. [   11.983586@0] hdmitx: err chn setting, must be 2, 4, 6 or 8, Rst as def
  1500. [   11.983587@0] hdmitx: err chn msk, must larger than 0
  1501. [   11.983593@0] aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1
  1502. [   11.983790@0] spdif_info: rate: 44100, channel status ch0_l:0x100, ch0_r:0x100, ch1_l:0x0, ch1_r:0x0
  1503. [   11.983793@0] hdmitx: err chn setting, must be 2, 4, 6 or 8, Rst as def
  1504. [   11.983794@0] hdmitx: err chn msk, must larger than 0
  1505. [   11.983798@0] aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1
  1506. [   11.984949@3] spdif_b keep clk continuous
  1507. [   11.984960@3] aml_spdif_close
  1508. [   11.985021@0] audio_ddr_mngr: frddrs[0] released by device ff642000.audiobus:spdif_b
  1509. [   12.942809@2] meson_uart ffd24000.serial: ttyS1 use xtal(24M) 24000000 change 115200 to 2000000
  1510. [   12.980021@2] Bluetooth: Core ver 2.22
  1511. [   12.980028@2] Bluetooth: Starting self testing
  1512. [   12.994483@2] Bluetooth: ECDH test passed in 14105 usecs
  1513. [   13.000540@3] Bluetooth: SMP test passed in 28 usecs
  1514. [   13.000581@3] Bluetooth: Finished self testing
  1515. [   13.000679@3] NET: Registered protocol family 31
  1516. [   13.000681@3] Bluetooth: HCI device and connection manager initialized
  1517. [   13.000697@3] Bluetooth: HCI socket layer initialized
  1518. [   13.000705@3] Bluetooth: L2CAP socket layer initialized
  1519. [   13.000727@3] Bluetooth: SCO socket layer initialized
  1520. [   13.027640@3] Bluetooth: HCI UART driver ver 2.3
  1521. [   13.027650@3] Bluetooth: HCI UART protocol H4 registered
  1522. [   13.027652@3] Bluetooth: HCI UART protocol BCSP registered
  1523. [   13.027654@3] Bluetooth: HCI UART protocol LL registered
  1524. [   13.027656@3] Bluetooth: HCI UART protocol ATH3K registered
  1525. [   13.027658@3] Bluetooth: HCI UART protocol Three-wire (H5) registered
  1526. [   13.027933@3] Bluetooth: HCI UART protocol Intel registered
  1527. [   13.028180@3] Bluetooth: HCI UART protocol Broadcom registered
  1528. [   13.028183@3] Bluetooth: HCI UART protocol QCA registered
  1529. [   13.028186@3] Bluetooth: HCI UART protocol AG6XX registered
  1530. [   13.028188@3] Bluetooth: HCI UART protocol Marvell registered
  1531. [   13.131574@1] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  1532. [   13.131580@1] Bluetooth: BNEP filters: protocol multicast
  1533. [   13.131595@1] Bluetooth: BNEP socket layer initialized
  1534. [   14.205623@1] cectx ff80023c.aocec: bad iniator with self:CEC RX len 5: 0f 87 00 e0 91
  1535. [   14.391838@1] cectx ff80023c.aocec: bad iniator with self:CEC RX len 5: 0f 87 00 e0 91
  1536. [   14.542591@1] cectx ff80023c.aocec: bad iniator with self:CEC RX len 5: 0f 87 00 e0 91
  1537. [   14.713111@1] OpenVFD: Select FD6551 controller
  1538. [   14.723716@1] cectx ff80023c.aocec: bad iniator with self:CEC RX len 5: 0f 87 00 e0 91
  1539. [   18.255376@0] audio_dsp: buf=0
  1540. [   18.255384@0] audio_dsp: IEC958_mode_raw=0
  1541. [   18.255412@0] audio_dsp: IEC958_mode_codec= 0, IEC958 type 2 CH PCM
  1542. [   18.255414@0] audio_dsp: last mode 0,now 0
  1543. [   18.260055@0] spdif_b keep clk continuous
  1544. [   18.260063@0] aml_spdif_open
  1545. [   18.260238@0] audio_ddr_mngr: frddrs[0] registered by device ff642000.audiobus:spdif_b
  1546. [   18.261271@0] set normal 512 fs /4 fs
  1547. [   18.261309@0]         set spdifout clk:5644800, mpll:22579200
  1548. [   18.261312@0]         get spdifout clk:5644797, mpll:22579186
  1549. [   18.261315@0] aml_dai_set_spdif_fmt , fmt 0x4010
  1550. [   18.261318@0] set normal 512 fs /4 fs
  1551. [   18.261326@0]         set spdifout clk:5644800, mpll:22579200
  1552. [   18.261327@0]         get spdifout clk:5644797, mpll:22579186
  1553. [   18.261390@0] spdif_info: rate: 44100, channel status ch0_l:0x100, ch0_r:0x100, ch1_l:0x0, ch1_r:0x0
  1554. [   18.261396@0] hdmitx: err chn setting, must be 2, 4, 6 or 8, Rst as def
  1555. [   18.261397@0] hdmitx: err chn msk, must larger than 0
  1556. [   18.261403@0] aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1
  1557. [   18.261581@0] spdif_info: rate: 44100, channel status ch0_l:0x100, ch0_r:0x100, ch1_l:0x0, ch1_r:0x0
  1558. [   18.261588@0] hdmitx: err chn setting, must be 2, 4, 6 or 8, Rst as def
  1559. [   18.261589@0] hdmitx: err chn msk, must larger than 0
  1560. [   18.261594@0] aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1
  1561. [   18.262831@0] asoc-aml-card auge_sound: S/PDIF Playback enable
  1562. [   19.012765@3] asoc-aml-card auge_sound: S/PDIF Playback disable
  1563. [   19.012841@3] spdif_info: rate: 44100, channel status ch0_l:0x100, ch0_r:0x100, ch1_l:0x0, ch1_r:0x0
  1564. [   19.012848@3] hdmitx: err chn setting, must be 2, 4, 6 or 8, Rst as def
  1565. [   19.012849@3] hdmitx: err chn msk, must larger than 0
  1566. [   19.012855@3] aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1
  1567. [   23.462548@3] asoc-aml-card auge_sound: S/PDIF Playback enable
  1568. [   23.762607@3] asoc-aml-card auge_sound: S/PDIF Playback disable
  1569. [   23.762691@3] spdif_info: rate: 44100, channel status ch0_l:0x100, ch0_r:0x100, ch1_l:0x0, ch1_r:0x0
  1570. [   23.762698@3] hdmitx: err chn setting, must be 2, 4, 6 or 8, Rst as def
  1571. [   23.762700@3] hdmitx: err chn msk, must larger than 0
  1572. [   23.762706@3] aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1
  1573. [   33.763030@3] spdif_b keep clk continuous
  1574. [   33.763041@3] aml_spdif_close
  1575. [   33.763164@3] audio_ddr_mngr: frddrs[0] released by device ff642000.audiobus:spdif_b
  1576. CoreELEC:~ #
RAW Paste Data
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy. OK, I Understand
 
Top