API tools faq
paste
CloneNum3

manual boot params into catch

CloneNum3
Apr 6th, 2016
149
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
Bash 28.30 KB | None | 0 0
raw download clone embed print report
  1. MX6SDL JUPITER KT 4.2.2 U-Boot > bsp get
  2. BSP A is valid
  3. BSP B is valid
  4. ##  A Side BSP Information:
  5.         Magic Number       :0xa55a5aa5(a55a5aa5:Valid, other:Invalid)
  6.         Boot Mode          :0x00000000(0:Normal,
  7.                                        1:Recovery,
  8.                                        2:EasyRecovery,
  9.                                        3:Re-EasyRecovery,
  10.                                        default:Normal)
  11.         Launch Mode        :0x00000000(0:APL,
  12.                                        1:TestMode.apk,
  13.                                        2:Slave TestMode,
  14.                                        3:Boot Error,
  15.                                        default:APL)
  16.         TestMode Sub-Mode  :0x00000002(0:TextMode_A.key, 1:Serv Mode,        2:Tech Mode,     default:Tech Mode)
  17.         Bootimage Side     :0x00000001(0:Side A,         1:Side B,                            default:Side A)
  18.         Recoveryimage Side :0x00000000(0:Side A,         1:Side B,                            default:Side A)
  19.         Debug Switch       :0x00000002(0:OFF,            1:ON,                                default:OFF)
  20.         Usb OTG Switch     :0x00000000(0:Host,           1:Device,                            default:Host)
  21.         Memchk flag        :0x00000000(0:No,             1:Yes,                               default:No)
  22.         Warp boot          :0x00000000(0:Side A,         1:Side B,                            default:Side A)
  23.         Boot Sub-Mode      :0x00000001(0:Normal,         1:Catch snapshot,   2:Warp,          default:Normal)
  24.         Update flag        :0x00000000(0:Recovery-Update,
  25.                                        1:uboot update,
  26.                                        2:boot.img update,
  27.                                        3:recovery.img update,
  28.                                        4:system.img update,
  29.                                        5:opening data update,
  30.                                        6:UI update,
  31.                                        7:All image update,
  32.                                        8:TESTMODE_N.KEY,
  33.                                        9:easyrecovery copy,
  34.                                        a:easyrecovery copy&verify,
  35.                                        b:password key copy&verify,
  36.                                        c:easyrecovery mode change,
  37.                                        default:Recovery-Update)
  38.         Update sub-flag    :0x00000001(0:SD Card,        1:USB1,             2:USB2           default:SD Card)
  39.         UI Update  flag    :0x00000000(0:non-updating,   1:updating,         default:non-updating)
  40.         Reserved1  flag    :0xffffffff(default:0xFFFFFFFF)
  41.         Reserved2  flag    :0xffffffff(default:0xFFFFFFFF)
  42. ##  B Side BSP Information:
  43.         Magic Number       :0xa55a5aa5(a55a5aa5:Valid, other:Invalid)
  44.         Boot Mode          :0x00000000(0:Normal,
  45.                                        1:Recovery,
  46.                                        2:EasyRecovery,
  47.                                        3:Re-EasyRecovery,
  48.                                        default:Normal)
  49.         Launch Mode        :0x00000000(0:APL,
  50.                                        1:TestMode.apk,
  51.                                        2:Slave TestMode,
  52.                                        3:Boot Error,
  53.                                        default:APL)
  54.         TestMode Sub-Mode  :0x00000002(0:TextMode_A.key, 1:Serv Mode,        2:Tech Mode,     default:Tech Mode)
  55.         Bootimage Side     :0x00000001(0:Side A,         1:Side B,                            default:Side A)
  56.         Recoveryimage Side :0x00000000(0:Side A,         1:Side B,                            default:Side A)
  57.         Debug Switch       :0x00000002(0:OFF,            1:ON,                                default:OFF)
  58.         Usb OTG Switch     :0x00000000(0:Host,           1:Device,                            default:Host)
  59.         Memchk flag        :0x00000000(0:No,             1:Yes,                               default:No)
  60.         Warp boot          :0x00000000(0:Side A,         1:Side B,                            default:Side A)
  61.         Boot Sub-Mode      :0x00000001(0:Normal,         1:Catch snapshot,   2:Warp,          default:Normal)
  62.         Update flag        :0x00000000(0:Recovery-Update,
  63.                                        1:uboot update,
  64.                                        2:boot.img update,
  65.                                        3:recovery.img update,
  66.                                        4:system.img update,
  67.                                        5:opening data update,
  68.                                        6:UI update,
  69.                                        7:All image update,
  70.                                        8:TESTMODE_N.KEY,
  71.                                        9:easyrecovery copy,
  72.                                        a:easyrecovery copy&verify,
  73.                                        b:password key copy&verify,
  74.                                        c:easyrecovery mode change,
  75.                                        default:Recovery-Update)
  76.         Update sub-flag    :0x00000001(0:SD Card,        1:USB1,             2:USB2,          default:SD Card)
  77.         UI Update  flag    :0x00000000(0:non-updating,   1:updating,         default:non-updating)
  78.         Reserved1  flag    :0xffffffff(default:0xFFFFFFFF)
  79.         Reserved2  flag    :0xffffffff(default:0xFFFFFFFF)
  80. MX6SDL JUPITER KT 4.2.2 U-Boot > setenv bootargs console=${console_kernel} init=/init androidboot.console=${console_android} ${smp} video=mxcfb0:dev=ldb,bpp=32 video=mxcfb1:dev=ak8814,BT656-NTSC,if=BT656,bpp=32 video=mxcfb2:off fbmem=6M,6M vmalloc=400M androidboot.hardware=freescale arm_freq=800 printk.time=${printk.time} printk_console=${printk.console} no_console_suspend=1 debug ignore_loglevel print_fatal_signals=1 ;booti mmc1 bootA
  81. ** Too many args (max. 16) **
  82. boot form partition 1(bootA)
  83. kernel   @ 10808000 (5341936)
  84. ramdisk  @ 11800000 (1491456)
  85. kernel cmdline:
  86.         use uboot command line:
  87.         console=ttymxc0,115200 init=/init androidboot.console=ttymxc0 nosmp video=mxcfb0:dev=ldb,bpp=32 video=mxcfb1:dev=ak8814,BT656-NTSC,if=BT656,bpp=32 video=mxcfb2:off fbmem=6M,6M vmalloc=400M androidboot.hardware=freescale arm_freq=800 printk.time=1 printk_console=on no_console_suspend=1
  88.  
  89. Starting kernel ...
  90.  
  91. Uncompressing Linux... done, booting the kernel.
  92. [    0.000000] Initializing cgroup subsys cpuset
  93. [    0.000000] Initializing cgroup subsys cpu
  94. [    0.000000] Linux version 3.0.35 (root@3of5) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #14 SMP PREEMPT Wed Mar 2 00:00:48 EST 2016
  95. [    0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c53c7d
  96. [    0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
  97. [    0.000000] Machine: Freescale i.MX 6Solo/DualLite JUPITER Board
  98. [    0.000000] Ignoring unrecognised tag 0x54410008
  99. [    0.000000] Jupiter printk enable
  100. [    0.000000] Memory policy: ECC disabled, Data cache writealloc
  101. [    0.000000] CPU identified as i.MX6DL/SOLO, silicon rev 1.1
  102. [    0.000000] PERCPU: Embedded 7 pages/cpu @c14a3000 s5984 r8192 d14496 u32768
  103. [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 223488
  104. [    0.000000] Kernel command line: console=ttymxc0,115200 init=/init androidboot.console=ttymxc0 nosmp video=mxcfb0:dev=ldb,bpp=32 video=mxcfb1:dev=ak8814,BT656-NTSC,if=BT656,bpp=32 video=mxcfb2:off fbmem=6M,6M vmalloc=400M androidboot.hardware=freescale arm_freq=800 printk.time=1 printk_console=on no_console_suspend=1
  105. [    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
  106. [    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  107. [    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  108. [    0.000000] Memory: 881MB = 881MB total
  109. [    0.000000] Memory: 879124k/879124k available, 169452k reserved, 492544K highmem
  110. [    0.000000] Virtual kernel memory layout:
  111. [    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
  112. [    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
  113. [    0.000000]     DMA     : 0xfde00000 - 0xffe00000   (  32 MB)
  114. [    0.000000]     vmalloc : 0xd9800000 - 0xf2000000   ( 392 MB)
  115. [    0.000000]     lowmem  : 0xc0000000 - 0xd9000000   ( 400 MB)
  116. [    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
  117. [    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
  118. [    0.000000]       .init : 0xc0008000 - 0xc00c6000   ( 760 kB)
  119. [    0.000000]       .text : 0xc00c6000 - 0xc0a9972c   (10062 kB)
  120. [    0.000000]       .data : 0xc0a9a000 - 0xc0b03314   ( 421 kB)
  121. [    0.000000]        .bss : 0xc0b03338 - 0xc0c99fa0   (1628 kB)
  122. [    0.000000] Preemptible hierarchical RCU implementation.
  123. [    0.000000] NR_IRQS:624
  124. [    0.000000] MXC GPIO hardware
  125. [    0.000000] EXT GPIO hardware
  126. [    0.000000] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 1431655ms
  127. [    0.000000] Set periph_clk's parent to pll2_pfd_400M!
  128. [    0.000000]
  129. [    0.000000] ssi1_clk clock = 16934400
  130. [    0.000000] arm_max_freq=800MHz
  131. [    0.000000]
  132. [    0.000000] [mx6_clocks_init]PLL4_AUDIO_BASE_ADDR value = 0x15006
  133. [    0.000000] MXC_CCM_CS1CDR = 0x0
  134. [    0.000000] MXC_CCM_CS2CDR = 0x730000
  135. [    0.000000] PLL_NUM_DIV_OFFSET = 0x5f5e100
  136. [    0.000000] PLL_DENOM_DIV_OFFSET = 0x2964619c
  137. [    0.000000] MXC_CCM_CSCMR1 = 0x10f0a803
  138. [    0.000000] MXC_CCM_CSCMR2 = 0x2a12f06
  139. [    0.000000] ANADIG_MISC1_REG = 0x80001000
  140. [    0.000000] ANADIG_MISC2_REG = 0x3f672f67
  141. [    0.000000] MXC_Early serial console at MMIO 0x2020000 (options '115200')
  142. [    0.000000] bootconsole [ttymxc0] enabled
  143. [    0.287737] Calibrating delay loop... 1581.05 BogoMIPS (lpj=7905280)
  144. [    0.380472] pid_max: default: 32768 minimum: 301
  145. [    0.385334] Mount-cache hash table entries: 512
  146. [    0.390750] Initializing cgroup subsys debug
  147. [    0.395046] Initializing cgroup subsys cpuacct
  148. [    0.399558] Initializing cgroup subsys devices
  149. [    0.404061] Initializing cgroup subsys freezer
  150. [    0.408525] Initializing cgroup subsys blkio
  151. [    0.412873] CPU: Testing write buffer coherency: ok
  152. [    0.417858] ftrace: allocating 25167 entries in 75 pages
  153. [    0.446856] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
  154. [    0.507049] Brought up 1 CPUs
  155. [    0.510035] SMP: Total of 1 processors activated (1581.05 BogoMIPS).
  156. [    0.542573] print_constraints: dummy:
  157. [    0.546585] NET: Registered protocol family 16
  158. [    0.558290] print_constraints: vddpu: 725 <--> 1300 mV at 700 mV fast normal
  159. [    0.566000] print_constraints: vddcore: 725 <--> 1300 mV at 1150 mV fast normal
  160. [    0.573875] print_constraints: vddsoc: 725 <--> 1300 mV at 1200 mV fast normal
  161. [    0.581895] print_constraints: vdd2p5: 2000 <--> 2775 mV at 2400 mV fast normal
  162. [    0.589782] print_constraints: vdd1p1: 800 <--> 1400 mV at 1100 mV fast normal
  163. [    0.597555] print_constraints: vdd3p0: 2625 <--> 3400 mV at 3000 mV fast normal
  164. [    0.624959] cpu regulator mode:ldo_enable
  165. [    0.664967] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.
  166. [    0.671960] hw-breakpoint: 1 breakpoint(s) reserved for watchpoint single-step.
  167. [    0.679301] hw-breakpoint: maximum watchpoint size is 4 bytes.
  168. [    0.685370] L310 cache controller enabled
  169. [    0.689401] l2x0: 16 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x02050000, Cache size: 524288 B
  170. [    0.750802] bio: create slab <bio-0> at 0
  171. [    0.755792] print_constraints: vmmc: 3300 mV
  172. [    0.761798] vgaarb: loaded
  173. [    0.766006] SCSI subsystem initialized
  174. [    0.770498] spi_ext imx6q-spiext.5: probed
  175. [    0.775204] spi_ext imx6q-spiext.6: probed
  176. [    0.780393] usbcore: registered new interface driver usbfs
  177. [    0.786099] usbcore: registered new interface driver hub
  178. [    0.791677] usbcore: registered new device driver usb
  179. [    0.796747] Freescale USB OTG Driver loaded, $Revision: 1.55 $
  180. [    0.822885] imx-ipuv3 imx-ipuv3.0: IPU DMFC NORMAL mode: 1(0~1), 5B(4,5), 5F(6,7)
  181. [    0.831586] Advanced Linux Sound Architecture Driver Version 1.0.24.
  182. [    0.839071] Bluetooth: Core ver 2.16
  183. [    0.842833] NET: Registered protocol family 31
  184. [    0.847293] Bluetooth: HCI device and connection manager initialized
  185. [    0.853779] Bluetooth: HCI socket layer initialized
  186. [    0.858675] Bluetooth: L2CAP socket layer initialized
  187. [    0.863820] Bluetooth: SCO socket layer initialized
  188. [    0.869195] i2c-core: driver [max17135] using legacy suspend method
  189. [    0.875545] i2c-core: driver [max17135] using legacy resume method
  190. [    0.881776] Switching to clocksource mxc_timer1
  191. [    0.897920] NET: Registered protocol family 2
  192. [    0.902557] IP route cache hash table entries: 16384 (order: 4, 65536 bytes)
  193. [    0.910514] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
  194. [    0.918833] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
  195. [    0.926584] TCP: Hash tables configured (established 65536 bind 65536)
  196. [    0.933134] TCP reno registered
  197. [    0.936293] UDP hash table entries: 256 (order: 1, 8192 bytes)
  198. [    0.942191] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
  199. [    0.948916] NET: Registered protocol family 1
  200. [    0.953667] RPC: Registered named UNIX socket transport module.
  201. [    0.959680] RPC: Registered udp transport module.
  202. [    0.964400] RPC: Registered tcp transport module.
  203. [    0.969138] RPC: Registered tcp NFSv4.1 backchannel transport module.
  204. [    0.975817] Unpacking initramfs...
  205. [    1.004517] Freeing initrd memory: 1456K
  206. [    1.009441] PMU: registered new PMU device of type 0
  207. [    1.014595] Static Power Management for Freescale i.MX6
  208. [    1.020014] wait mode is enabled for i.MX6
  209. [    1.024331] cpaddr = d9820000 suspend_iram_base=d988c000
  210. [    1.029801] PM driver module loaded
  211. [    1.033762] IMX usb wakeup probe
  212. [    1.037612] add wake up source irq 75
  213. [    1.045022] IMX usb wakeup probe
  214. [    1.048648] cpu regulator mode:ldo_enable
  215. [    1.052725] i.MXC CPU frequency driver
  216. [    1.057187] Lineo Warp!! module loaded
  217. [    1.078955] highmem bounce pool size: 64 pages
  218. [    1.083752] ashmem: initialized
  219. [    1.091402] JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
  220. [    1.097914] fuse init (API version 7.16)
  221. [    1.102156] msgmni has been set to 757
  222. [    1.107858] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
  223. [    1.115397] io scheduler noop registered
  224. [    1.119388] io scheduler deadline registered
  225. [    1.123710] io scheduler cfq registered (default)
  226. [    1.131881] MIPI DSI driver module loaded
  227. [    1.136166] mxc_sdc_fb mxc_sdc_fb.0: register mxc display driver ldb
  228. [    1.142631] _regulator_get: get() with no identifier
  229. [    1.166564] mxc_sdc_fb mxc_sdc_fb.1: register mxc display driver ak8814
  230. [    1.187631] imx-sdma imx-sdma: loaded firmware 1.1
  231. [    1.202837] imx-sdma imx-sdma: initialized
  232. [    1.400206] Serial: IMX driver
  233. [    1.403405] imx-uart.0: ttymxc0 at MMIO 0x2020000 (irq = 58) is a IMX
  234. [    1.410069] console [ttymxc0] enabled, bootconsole disabled
  235. [    1.410069] console [ttymxc0] enabled, bootconsole disabled
  236. [    1.421868] imx-uart.1: ttymxc1 at MMIO 0x21e8000 (irq = 59) is a IMX
  237. [    1.428912] imx-uart.2: ttymxc2 at MMIO 0x21ec000 (irq = 60) is a IMX
  238. [    1.435868] imx-uart.3: ttymxc3 at MMIO 0x21f0000 (irq = 61) is a IMX
  239. [    1.442826] imx-uart.4: ttymxc4 at MMIO 0x21f4000 (irq = 62) is a IMX
  240. [    1.450064] imx-ext-uart.0: ttyext0 at MMIO 0xa000000 (irq = 392) is a IMX
  241. [    1.457491] imx-ext-uart.1: ttyext1 at MMIO 0xa000010 (irq = 392) is a IMX
  242. [    1.467363] Applicom driver: $Id: ac.c,v 1.30 2000/03/22 16:03:57 dwmw2 Exp $
  243. [    1.474511] ac.o: No PCI boards found.
  244. [    1.478357] ac.o: For an ISA board you must supply memory and irq parameters.
  245. [    1.486666] spi-hd spi-hd.1: probed
  246. [    1.490829] audio_clk_pwm audio_clk_pwm.0: probed
  247. [    1.505074] loop: module loaded
  248. [    1.508343] Compaq SMART2 Driver (v 2.6.0)
  249. [    1.512782] HP CISS Driver (v 3.6.26)
  250. [    1.517650] Phantom Linux Driver, version n0.9.8, init OK
  251. [    1.529983] physmap platform flash device: 00800000 at 08000000
  252. [    1.536149] physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x0000c2 Chip ID 0x0022c9
  253. [    1.546601] Amd/Fujitsu Extended Query Table at 0x0040
  254. [    1.551756]   Amd/Fujitsu Extended Query version 1.1.
  255. [    1.557002] physmap-flash.0: Swapping erase regions for top-boot CFI table.
  256. [    1.563972] number of CFI chips: 1
  257. [    1.569403] Using physmap partition information
  258. [    1.573945] Creating 3 MTD partitions on "physmap-flash.0":
  259. [    1.579590] 0x000000000000-0x000000270000 : "ParallelNorFlash"
  260. [    1.587175] 0x000000270000-0x000000370000 : "BackUpArea"
  261. [    1.593919] 0x000000370000-0x000000800000 : "EasyRecovery"
  262. [    1.601272] Ramix PMC551 PCI Mezzanine Ram Driver. (C) 1999,2000 Nortel Networks.
  263. [    1.610606] pmc551: not detected
  264. [    1.615738] Fixed MDIO Bus: probed
  265. [    1.620187] vcan: Virtual CAN interface driver
  266. [    1.624640] CAN device driver interface
  267. [    1.628597] flexcan netdevice driver
  268. [    1.632544] Atheros(R) L2 Ethernet Driver - version 2.2.3
  269. [    1.638045] Copyright (c) 2007 Atheros Corporation.
  270. [    1.643087] FEC Ethernet Driver
  271. [    1.686432] FEC: MDIO read timeout, mii_id=0
  272. [    1.691237] PPP generic driver version 2.4.2
  273. [    1.696164] PPP Deflate Compression module registered
  274. [    1.701291] PPP BSD Compression module registered
  275. [    1.708038] PPP MPPE Compression module registered
  276. [    1.712841] NET: Registered protocol family 24
  277. [    1.717414] PPTP driver version 0.8.5
  278. [    1.721391] tun: Universal TUN/TAP device driver, 1.6
  279. [    1.726533] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
  280. [    1.733492] HDLC support module revision 1.22
  281. [    1.738147] arcnet loaded.
  282. [    1.741031] usbcore: registered new interface driver catc
  283. [    1.746509] catc: v2.8:CATC EL1210A NetMate USB Ethernet driver
  284. [    1.752577] usbcore: registered new interface driver kaweth
  285. [    1.758223] pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet driver
  286. [    1.765858] usbcore: registered new interface driver pegasus
  287. [    1.771584] rtl8150: v0.6.2 (2004/08/27):rtl8150 based usb-ethernet driver
  288. [    1.778635] usbcore: registered new interface driver rtl8150
  289. [    1.784302] hso: drivers/net/usb/hso.c: Option Wireless
  290. [    1.789753] usbcore: registered new interface driver hso
  291. [    1.795248] usbcore: registered new interface driver asix
  292. [    1.800816] usbcore: registered new interface driver cdc_ether
  293. [    1.806863] usbcore: registered new interface driver cdc_eem
  294. [    1.812704] usbcore: registered new interface driver dm9601
  295. [    1.818455] usbcore: registered new interface driver smsc75xx
  296. [    1.824395] usbcore: registered new interface driver smsc95xx
  297. [    1.830326] usbcore: registered new interface driver gl620a
  298. [    1.836078] usbcore: registered new interface driver net1080
  299. [    1.841915] usbcore: registered new interface driver plusb
  300. [    1.847609] usbcore: registered new interface driver rndis_host
  301. [    1.853711] usbcore: registered new interface driver cdc_subset
  302. [    1.859804] usbcore: registered new interface driver zaurus
  303. [    1.865564] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
  304. [    1.873164] usbcore: registered new interface driver int51x1
  305. [    1.879036] usbcore: registered new interface driver kalmia
  306. [    1.884790] usbcore: registered new interface driver ipheth
  307. [    1.890540] usbcore: registered new interface driver sierra_net
  308. [    1.896673] usbcore: registered new interface driver cx82310_eth
  309. [    1.902686] cdc_ncm: 04-Aug-2011
  310. [    1.906094] usbcore: registered new interface driver cdc_ncm
  311. [    1.911922] usbcore: registered new interface driver lg-vl600
  312. [    1.917889] Loaded prism54 driver, version 1.2
  313. [    1.922852] I2O subsystem v1.325
  314. [    1.926086] i2o: max drivers = 8
  315. [    1.929953] I2O Configuration OSM v1.323
  316. [    1.934436] I2O Bus Adapter OSM v1.317
  317. [    1.938406] I2O Block Device OSM v1.325
  318. [    1.942591] I2O SCSI Peripheral OSM v1.316
  319. [    1.946902] I2O ProcFS OSM v1.316
  320. [    1.950394] Fusion MPT base driver 3.04.19
  321. [    1.954495] Copyright (c) 1999-2008 LSI Corporation
  322. [    1.959467] Fusion MPT SPI Host driver 3.04.19
  323. [    1.964084] Fusion MPT FC Host driver 3.04.19
  324. [    1.968688] Fusion MPT SAS Host driver 3.04.19
  325. [    1.973342] Fusion MPT misc device (ioctl) driver 3.04.19
  326. [    1.979120] mptctl: Registered with Fusion MPT base driver
  327. [    1.984614] mptctl: /dev/mptctl @ (major,minor=10,220)
  328. [    1.991142] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  329. [    2.018627] fsl-ehci fsl-ehci.0: Freescale On-Chip EHCI Host Controller
  330. [    2.025276] fsl-ehci fsl-ehci.0: new USB bus registered, assigned bus number 1
  331. [    2.056461] fsl-ehci fsl-ehci.0: irq 75, io base 0x02184000
  332. [    2.076444] fsl-ehci fsl-ehci.0: USB 2.0 started, EHCI 1.00
  333. [    2.086849] hub 1-0:1.0: USB hub found
  334. [    2.090620] hub 1-0:1.0: 1 port detected
  335. [    2.094844] add wake up source irq 72
  336. [    2.098627] fsl-ehci fsl-ehci.1: Freescale On-Chip EHCI Host Controller
  337. [    2.105265] fsl-ehci fsl-ehci.1: new USB bus registered, assigned bus number 2
  338. [    2.136462] fsl-ehci fsl-ehci.1: irq 72, io base 0x02184200
  339. [    2.156435] fsl-ehci fsl-ehci.1: USB 2.0 started, EHCI 1.00
  340. [    2.166201] hub 2-0:1.0: USB hub found
  341. [    2.170041] hub 2-0:1.0: 1 port detected
  342. [    2.174505] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  343. [    2.180940] uhci_hcd: USB Universal Host Controller Interface driver
  344. [    2.187969] usbcore: registered new interface driver cdc_acm
  345. [    2.193646] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  346. [    2.201725] Initializing USB Mass Storage driver...
  347. [    2.206859] usbcore: registered new interface driver usb-storage
  348. [    2.212871] USB Mass Storage support registered.
  349. [    2.217702] usbcore: registered new interface driver ums-realtek
  350. [    2.224071] usbcore: registered new interface driver usbserial
  351. [    2.229968] usbserial: USB Serial Driver core
  352. [    2.234457] USB Serial support registered for GSM modem (1-port)
  353. [    2.240796] usbcore: registered new interface driver option
  354. [    2.246374] option: v0.7.2:USB Driver for GSM modems
  355. [    2.251532] USB Serial support registered for Qualcomm USB modem
  356. [    2.257779] usbcore: registered new interface driver qcserial
  357. [    2.264254] mousedev: PS/2 mouse device common for all mice
  358. [    2.270388] MXC keypad loaded
  359. [    2.273771] input: mxckpd as /devices/virtual/input/input0
  360. [    2.287088] i2c-core: driver [isl29023] using legacy suspend method
  361. [    2.293364] i2c-core: driver [isl29023] using legacy resume method
  362. [    2.301239] using rtc device, snvs_rtc, for alarms
  363. [    2.305900] snvs_rtc snvs_rtc.0: rtc core: registered snvs_rtc as rtc0
  364. [    2.312900] i2c /dev entries driver
  365. [    2.320808] usbcore: registered new interface driver i2c-tiny-usb
  366. [    2.326995] Linux video capture interface: v2.00
  367. [    2.346051] mxc_v4l2_output mxc_v4l2_output.0: V4L2 device registered as video16
  368. [    2.353846] mxc_v4l2_output mxc_v4l2_output.0: V4L2 device registered as video17
  369. [    2.361651] mxc_v4l2_output mxc_v4l2_output.0: V4L2 device registered as video18
  370. [    2.369498] usbcore: registered new interface driver uvcvideo
  371. [    2.375250] USB Video Class driver (v1.1.0)
  372. [    2.380899] i2c-core: driver [mag3110] using legacy suspend method
  373. [    2.387160] i2c-core: driver [mag3110] using legacy resume method
  374. [    2.393513] device-mapper: uevent: version 1.0.3
  375. [    2.398745] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: [email protected]
  376. [    2.407297] Bluetooth: Virtual HCI driver ver 1.3
  377. [    2.412309] Bluetooth: HCI UART driver ver 2.2
  378. [    2.416834] Bluetooth: HCI H4 protocol initialized
  379. [    2.421631] Bluetooth: HCI BCSP protocol initialized
  380. [    2.426630] Bluetooth: HCILL protocol initialized
  381. [    2.431341] Bluetooth: Broadcom Blutonium firmware driver ver 1.2
  382. [    2.437643] usbcore: registered new interface driver bcm203x
  383. [    2.443311] Bluetooth: Digianswer Bluetooth USB driver ver 0.10
  384. [    2.449444] usbcore: registered new interface driver bpa10x
  385. [    2.455025] Bluetooth: BlueFRITZ! USB driver ver 1.2
  386. [    2.460200] usbcore: registered new interface driver bfusb
  387. [    2.465693] Bluetooth: Generic Bluetooth USB driver ver 0.6
  388. [    2.471487] usbcore: registered new interface driver btusb
  389. [    2.477038] Bluetooth: Generic Bluetooth SDIO driver ver 0.1
  390. [    2.483596] sdhci: Secure Digital Host Controller Interface driver
  391. [    2.489849] sdhci: Copyright(c) Pierre Ossman
  392. [    2.495283] mmc0: SDHCI controller on platform [sdhci-esdhc-imx.1] using ADMA
  393. [    2.503662] mmc1: no vmmc regulator found
  394. [    2.510292] mmc1: SDHCI controller on platform [sdhci-esdhc-imx.0] using ADMA
  395. [    2.522826] mxc_vdoa mxc_vdoa: i.MX Video Data Order Adapter(VDOA) driver probed
  396. [    2.531280] VPU initialized
  397. [    2.535397] mxc_asrc registered
  398. [    2.585875] revserved_memory_account:viv_gpu registerd
  399. [    2.616986] usbcore: registered new interface driver usbhid
  400. [    2.622567] usbhid: USB HID core driver
  401. [    2.627629] logger: created 256K log 'log_main'
  402. [    2.632526] logger: created 256K log 'log_events'
  403. [    2.641653] logger: created 256K log 'log_radio'
  404. [    2.646716] logger: created 256K log 'log_system'
  405. [    2.651779] logger: created 256K log 'log_error'
  406. [    2.657619] usbcore: registered new interface driver snd-usb-audio
  407. [    2.664697] Cirrus Logic AK7736 ALSA SoC Codec Driver
  408. [    2.674879] imx_3stack asoc driver
  409. [    2.692353] mmc0: new high speed SDHC card at address 17f8
  410. [    2.703269] mmcblk0: mmc0:17f8 SW32G 28.8 GiB
  411. [    2.709219] asoc: AK7736 <-> imx-esai.0 mapping ok
  412. [    2.716934] frontdac 1-0053: Failed to add route Mic Jack->MIC_IN
  413. [    2.723799] asoc: frontdac_0 <-> imx-ssi.1 mapping ok
  414. [    2.731112] reardac 1-0054: Failed to add route LINE_OUT->Ext Spk
  415. [    2.737938] asoc: reardac_0 <-> imx-ssi.2 mapping ok
  416. [    2.744089] ALSA device list:
  417. [    2.747243]  mmcblk0: p1 p2 p3 < p5 p6 p7 p8 p9 > p4
  418. [    2.753506]   #0: ak7736-audio
  419. [    2.756788]   #1: frontdac-audio
  420. [    2.760021]   #2: reardac-audio
  421. [    2.763248] Netfilter messages via NETLINK v0.30.
  422. [    2.768986] nf_conntrack version 0.5.0 (13759 buckets, 55036 max)
  423. [    2.775813] ctnetlink v0.93: registering with nfnetlink.
  424. [    2.781666] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
  425. [    2.788719] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
  426. [    2.795134] xt_time: kernel timezone is -0000
  427. [    2.805574] IPv4 over IPv4 tunneling driver
  428. [    2.811102] GRE over IPv4 demultiplexor driver
  429. [    2.816241] ip_tables: (C) 2000-2006 Netfilter Core Team
  430. [    2.850422] arp_tables: (C) 2002 David S. Miller
  431. [    2.855138] TCP cubic registered
  432. [    2.866709] NET: Registered protocol family 10
  433. [    2.877961] ip6_tables: (C) 2000-2006 Netfilter Core Team
  434. [    2.883658] IPv6 over IPv4 tunneling driver
  435. [    2.898498] NET: Registered protocol family 17
  436. [    2.902981] NET: Registered protocol family 15
  437. [    2.932813] can: controller area network core (rev 20090105 abi 8)
  438. [    2.942154] NET: Registered protocol family 29
  439. [    2.946628] can: raw protocol (rev 20090105)
  440. [    2.954992] can: broadcast manager protocol (rev 20090105 t)
  441. [    2.967917] Bluetooth: RFCOMM TTY layer initialized
  442. [    2.972810] Bluetooth: RFCOMM socket layer initialized
  443. [    2.978027] Bluetooth: RFCOMM ver 1.11
  444. [    2.981783] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  445. [    2.992153] Bluetooth: BNEP filters: protocol multicast
  446. [    2.997405] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  447. [    3.003596] NET: Registered protocol family 33
  448. [    3.038473] RxRPC: Registered security type 2 'rxkad'
  449. [    3.043545] L2TP core driver, V2.0
  450. [    3.053196] PPPoL2TP kernel driver, V2.0
  451. [    3.062245] L2TP IP encapsulation support (L2TPv3)
  452. [    3.067133] L2TP netlink interface
  453. [    3.070564] L2TP ethernet pseudowire support (L2TPv3)
  454. [    3.075620] lib80211: common routines for IEEE802.11 drivers
  455. [    3.086377] Registering the dns_resolver key type
  456. [    3.091134] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
  457. [    3.117342] Bus freq driver module loaded
  458. [    3.121359] Bus freq driver Enabled
  459. [    3.139762] mxc_dvfs_core_probe
  460. [    3.143210] DVFS driver module loaded
  461. [    3.159971] snvs_rtc snvs_rtc.0: setting system clock to 1970-01-01 00:00:00 UTC (0)
  462. [    3.168644] Freeing init memory: 760K
  463. [    3.936555] warning: `adbd' uses 32-bit capabilities (legacy support in use)
  464. uid=0 gid=0@android:/ # [    6.624653] ******** mxcfb_ak8814:FB_EVENT_MODE_CHANGE: AK8814_MODE_NTSC
  465. [   27.646674] request_suspend_state: wakeup (3->0) at 27290273672 (1970-01-02 00:00:07.797438334 UTC)
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!