No configuration change.
Already configured!
Please 'make distclean' and try again.
  Copy files
Processing input config file: /workspaces/rtos_labs/nuttxspace/nuttx/tools/../../../we-act-board-bringup/boards/arm/stm32h7/weact-stm32h743custom/configs/nsh/defconfig
Appended # to /workspaces/rtos_labs/nuttxspace/nuttx/tools/../.config
CONTENT OF OUTPUT FILE BEGIN

#
CONTENT OF OUTPUT FILE END
Appended # This file is autogenerated: And created with custom comments.. to /workspaces/rtos_labs/nuttxspace/nuttx/tools/../.config
CONTENT OF OUTPUT FILE BEGIN

#
# This file is autogenerated: And created with custom comments..
CONTENT OF OUTPUT FILE END
Appended # to /workspaces/rtos_labs/nuttxspace/nuttx/tools/../.config
CONTENT OF OUTPUT FILE BEGIN

#
# This file is autogenerated: And created with custom comments..
#
CONTENT OF OUTPUT FILE END
Appended # You can use "make menuconfig" to make any modifications to the installed .config file. to /workspaces/rtos_labs/nuttxspace/nuttx/tools/../.config
CONTENT OF OUTPUT FILE BEGIN

#
# This file is autogenerated: And created with custom comments..
#
# You can use "make menuconfig" to make any modifications to the installed .config file.
CONTENT OF OUTPUT FILE END
Appended # You can then do "make savedefconfig" to generate a new defconfig file that includes your to /workspaces/rtos_labs/nuttxspace/nuttx/tools/../.config
CONTENT OF OUTPUT FILE BEGIN

#
# This file is autogenerated: And created with custom comments..
#
# You can use "make menuconfig" to make any modifications to the installed .config file.
# You can then do "make savedefconfig" to generate a new defconfig file that includes your
CONTENT OF OUTPUT FILE END
Appended # modifications. to /workspaces/rtos_labs/nuttxspace/nuttx/tools/../.config
CONTENT OF OUTPUT FILE BEGIN

#
# This file is autogenerated: And created with custom comments..
#
# You can use "make menuconfig" to make any modifications to the installed .config file.
# You can then do "make savedefconfig" to generate a new defconfig file that includes your
# modifications.
CONTENT OF OUTPUT FILE END
Appended # to /workspaces/rtos_labs/nuttxspace/nuttx/tools/../.config
CONTENT OF OUTPUT FILE BEGIN

#
# This file is autogenerated: And created with custom comments..
#
# You can use "make menuconfig" to make any modifications to the installed .config file.
# You can then do "make savedefconfig" to generate a new defconfig file that includes your
# modifications.
#
CONTENT OF OUTPUT FILE END
Appended # CONFIG_NSH_DISABLE_IFCONFIG is not set to /workspaces/rtos_labs/nuttxspace/nuttx/tools/../.config
CONTENT OF OUTPUT FILE BEGIN

#
# This file is autogenerated: And created with custom comments..
#
# You can use "make menuconfig" to make any modifications to the installed .config file.
# You can then do "make savedefconfig" to generate a new defconfig file that includes your
# modifications.
#
# CONFIG_NSH_DISABLE_IFCONFIG is not set
CONTENT OF OUTPUT FILE END
Appended # CONFIG_NSH_DISABLE_PS is not set to /workspaces/rtos_labs/nuttxspace/nuttx/tools/../.config
CONTENT OF OUTPUT FILE BEGIN

#
# This file is autogenerated: And created with custom comments..
#
# You can use "make menuconfig" to make any modifications to the installed .config file.
# You can then do "make savedefconfig" to generate a new defconfig file that includes your
# modifications.
#
# CONFIG_NSH_DISABLE_IFCONFIG is not set
# CONFIG_NSH_DISABLE_PS is not set
CONTENT OF OUTPUT FILE END
Appended # CONFIG_STANDARD_SERIAL is not set to /workspaces/rtos_labs/nuttxspace/nuttx/tools/../.config
CONTENT OF OUTPUT FILE BEGIN

#
# This file is autogenerated: And created with custom comments..
#
# You can use "make menuconfig" to make any modifications to the installed .config file.
# You can then do "make savedefconfig" to generate a new defconfig file that includes your
# modifications.
#
# CONFIG_NSH_DISABLE_IFCONFIG is not set
# CONFIG_NSH_DISABLE_PS is not set
# CONFIG_STANDARD_SERIAL is not set
CONTENT OF OUTPUT FILE END
Appended # CONFIG_STM32H7_USE_LEGACY_PINMAP is not set to /workspaces/rtos_labs/nuttxspace/nuttx/tools/../.config
CONTENT OF OUTPUT FILE BEGIN

#
# This file is autogenerated: And created with custom comments..
#
# You can use "make menuconfig" to make any modifications to the installed .config file.
# You can then do "make savedefconfig" to generate a new defconfig file that includes your
# modifications.
#
# CONFIG_NSH_DISABLE_IFCONFIG is not set
# CONFIG_NSH_DISABLE_PS is not set
# CONFIG_STANDARD_SERIAL is not set
# CONFIG_STM32H7_USE_LEGACY_PINMAP is not set
CONTENT OF OUTPUT FILE END
Appended CONFIG_ARCH="arm" to /workspaces/rtos_labs/nuttxspace/nuttx/tools/../.config
CONTENT OF OUTPUT FILE BEGIN

#
# This file is autogenerated: And created with custom comments..
#
# You can use "make menuconfig" to make any modifications to the installed .config file.
# You can then do "make savedefconfig" to generate a new defconfig file that includes your
# modifications.
#
# CONFIG_NSH_DISABLE_IFCONFIG is not set
# CONFIG_NSH_DISABLE_PS is not set
# CONFIG_STANDARD_SERIAL is not set
# CONFIG_STM32H7_USE_LEGACY_PINMAP is not set
CONFIG_ARCH="arm"
CONTENT OF OUTPUT FILE END
Appended CONFIG_ARCH_BOARD_CUSTOM=y to /workspaces/rtos_labs/nuttxspace/nuttx/tools/../.config
CONTENT OF OUTPUT FILE BEGIN

#
# This file is autogenerated: And created with custom comments..
#
# You can use "make menuconfig" to make any modifications to the installed .config file.
# You can then do "make savedefconfig" to generate a new defconfig file that includes your
# modifications.
#
# CONFIG_NSH_DISABLE_IFCONFIG is not set
# CONFIG_NSH_DISABLE_PS is not set
# CONFIG_STANDARD_SERIAL is not set
# CONFIG_STM32H7_USE_LEGACY_PINMAP is not set
CONFIG_ARCH="arm"
CONFIG_ARCH_BOARD_CUSTOM=y
CONTENT OF OUTPUT FILE END
Appended CONFIG_ARCH_BOARD_CUSTOM_DIR="../../we-act-board-bringup/boards/arm/stm32h7/weact-stm32h743custom" to /workspaces/rtos_labs/nuttxspace/nuttx/tools/../.config
CONTENT OF OUTPUT FILE BEGIN

#
# This file is autogenerated: And created with custom comments..
#
# You can use "make menuconfig" to make any modifications to the installed .config file.
# You can then do "make savedefconfig" to generate a new defconfig file that includes your
# modifications.
#
# CONFIG_NSH_DISABLE_IFCONFIG is not set
# CONFIG_NSH_DISABLE_PS is not set
# CONFIG_STANDARD_SERIAL is not set
# CONFIG_STM32H7_USE_LEGACY_PINMAP is not set
CONFIG_ARCH="arm"
CONFIG_ARCH_BOARD_CUSTOM=y
CONFIG_ARCH_BOARD_CUSTOM_DIR="../../we-act-board-bringup/boards/arm/stm32h7/weact-stm32h743custom"
CONTENT OF OUTPUT FILE END
Appended CONFIG_ARCH_BOARD_CUSTOM_NAME="weact-stm32h743custom" to /workspaces/rtos_labs/nuttxspace/nuttx/tools/../.config
CONTENT OF OUTPUT FILE BEGIN

#
# This file is autogenerated: And created with custom comments..
#
# You can use "make menuconfig" to make any modifications to the installed .config file.
# You can then do "make savedefconfig" to generate a new defconfig file that includes your
# modifications.
#
# CONFIG_NSH_DISABLE_IFCONFIG is not set
# CONFIG_NSH_DISABLE_PS is not set
# CONFIG_STANDARD_SERIAL is not set
# CONFIG_STM32H7_USE_LEGACY_PINMAP is not set
CONFIG_ARCH="arm"
CONFIG_ARCH_BOARD_CUSTOM=y
CONFIG_ARCH_BOARD_CUSTOM_DIR="../../we-act-board-bringup/boards/arm/stm32h7/weact-stm32h743custom"
CONFIG_ARCH_BOARD_CUSTOM_NAME="weact-stm32h743custom"
CONTENT OF OUTPUT FILE END
Appended CONFIG_ARCH_BOARD_CUSTOM_DIR_RELPATH=y to /workspaces/rtos_labs/nuttxspace/nuttx/tools/../.config
CONTENT OF OUTPUT FILE BEGIN

#
# This file is autogenerated: And created with custom comments..
#
# You can use "make menuconfig" to make any modifications to the installed .config file.
# You can then do "make savedefconfig" to generate a new defconfig file that includes your
# modifications.
#
# CONFIG_NSH_DISABLE_IFCONFIG is not set
# CONFIG_NSH_DISABLE_PS is not set
# CONFIG_STANDARD_SERIAL is not set
# CONFIG_STM32H7_USE_LEGACY_PINMAP is not set
CONFIG_ARCH="arm"
CONFIG_ARCH_BOARD_CUSTOM=y
CONFIG_ARCH_BOARD_CUSTOM_DIR="../../we-act-board-bringup/boards/arm/stm32h7/weact-stm32h743custom"
CONFIG_ARCH_BOARD_CUSTOM_NAME="weact-stm32h743custom"
CONFIG_ARCH_BOARD_CUSTOM_DIR_RELPATH=y
CONTENT OF OUTPUT FILE END
Skipped empty line from defconfig
CONTENT OF OUTPUT FILE BEGIN

#
# This file is autogenerated: And created with custom comments..
#
# You can use "make menuconfig" to make any modifications to the installed .config file.
# You can then do "make savedefconfig" to generate a new defconfig file that includes your
# modifications.
#
# CONFIG_NSH_DISABLE_IFCONFIG is not set
# CONFIG_NSH_DISABLE_PS is not set
# CONFIG_STANDARD_SERIAL is not set
# CONFIG_STM32H7_USE_LEGACY_PINMAP is not set
CONFIG_ARCH="arm"
CONFIG_ARCH_BOARD_CUSTOM=y
CONFIG_ARCH_BOARD_CUSTOM_DIR="../../we-act-board-bringup/boards/arm/stm32h7/weact-stm32h743custom"
CONFIG_ARCH_BOARD_CUSTOM_NAME="weact-stm32h743custom"
CONFIG_ARCH_BOARD_CUSTOM_DIR_RELPATH=y
CONTENT OF OUTPUT FILE END
Appended CONFIG_ARCH_HAVE_LEDS=y to /workspaces/rtos_labs/nuttxspace/nuttx/tools/../.config
CONTENT OF OUTPUT FILE BEGIN

#
# This file is autogenerated: And created with custom comments..
#
# You can use "make menuconfig" to make any modifications to the installed .config file.
# You can then do "make savedefconfig" to generate a new defconfig file that includes your
# modifications.
#
# CONFIG_NSH_DISABLE_IFCONFIG is not set
# CONFIG_NSH_DISABLE_PS is not set
# CONFIG_STANDARD_SERIAL is not set
# CONFIG_STM32H7_USE_LEGACY_PINMAP is not set
CONFIG_ARCH="arm"
CONFIG_ARCH_BOARD_CUSTOM=y
CONFIG_ARCH_BOARD_CUSTOM_DIR="../../we-act-board-bringup/boards/arm/stm32h7/weact-stm32h743custom"
CONFIG_ARCH_BOARD_CUSTOM_NAME="weact-stm32h743custom"
CONFIG_ARCH_BOARD_CUSTOM_DIR_RELPATH=y
CONFIG_ARCH_HAVE_LEDS=y
CONTENT OF OUTPUT FILE END
Appended CONFIG_ARCH_HAVE_BUTTONS=y to /workspaces/rtos_labs/nuttxspace/nuttx/tools/../.config
CONTENT OF OUTPUT FILE BEGIN

#
# This file is autogenerated: And created with custom comments..
#
# You can use "make menuconfig" to make any modifications to the installed .config file.
# You can then do "make savedefconfig" to generate a new defconfig file that includes your
# modifications.
#
# CONFIG_NSH_DISABLE_IFCONFIG is not set
# CONFIG_NSH_DISABLE_PS is not set
# CONFIG_STANDARD_SERIAL is not set
# CONFIG_STM32H7_USE_LEGACY_PINMAP is not set
CONFIG_ARCH="arm"
CONFIG_ARCH_BOARD_CUSTOM=y
CONFIG_ARCH_BOARD_CUSTOM_DIR="../../we-act-board-bringup/boards/arm/stm32h7/weact-stm32h743custom"
CONFIG_ARCH_BOARD_CUSTOM_NAME="weact-stm32h743custom"
CONFIG_ARCH_BOARD_CUSTOM_DIR_RELPATH=y
CONFIG_ARCH_HAVE_LEDS=y
CONFIG_ARCH_HAVE_BUTTONS=y
CONTENT OF OUTPUT FILE END
Appended CONFIG_ARCH_HAVE_IRQBUTTONS=y to /workspaces/rtos_labs/nuttxspace/nuttx/tools/../.config
CONTENT OF OUTPUT FILE BEGIN

#
# This file is autogenerated: And created with custom comments..
#
# You can use "make menuconfig" to make any modifications to the installed .config file.
# You can then do "make savedefconfig" to generate a new defconfig file that includes your
# modifications.
#
# CONFIG_NSH_DISABLE_IFCONFIG is not set
# CONFIG_NSH_DISABLE_PS is not set
# CONFIG_STANDARD_SERIAL is not set
# CONFIG_STM32H7_USE_LEGACY_PINMAP is not set
CONFIG_ARCH="arm"
CONFIG_ARCH_BOARD_CUSTOM=y
CONFIG_ARCH_BOARD_CUSTOM_DIR="../../we-act-board-bringup/boards/arm/stm32h7/weact-stm32h743custom"
CONFIG_ARCH_BOARD_CUSTOM_NAME="weact-stm32h743custom"
CONFIG_ARCH_BOARD_CUSTOM_DIR_RELPATH=y
CONFIG_ARCH_HAVE_LEDS=y
CONFIG_ARCH_HAVE_BUTTONS=y
CONFIG_ARCH_HAVE_IRQBUTTONS=y
CONTENT OF OUTPUT FILE END
Skipped empty line from defconfig
CONTENT OF OUTPUT FILE BEGIN

#
# This file is autogenerated: And created with custom comments..
#
# You can use "make menuconfig" to make any modifications to the installed .config file.
# You can then do "make savedefconfig" to generate a new defconfig file that includes your
# modifications.
#
# CONFIG_NSH_DISABLE_IFCONFIG is not set
# CONFIG_NSH_DISABLE_PS is not set
# CONFIG_STANDARD_SERIAL is not set
# CONFIG_STM32H7_USE_LEGACY_PINMAP is not set
CONFIG_ARCH="arm"
CONFIG_ARCH_BOARD_CUSTOM=y
CONFIG_ARCH_BOARD_CUSTOM_DIR="../../we-act-board-bringup/boards/arm/stm32h7/weact-stm32h743custom"
CONFIG_ARCH_BOARD_CUSTOM_NAME="weact-stm32h743custom"
CONFIG_ARCH_BOARD_CUSTOM_DIR_RELPATH=y
CONFIG_ARCH_HAVE_LEDS=y
CONFIG_ARCH_HAVE_BUTTONS=y
CONFIG_ARCH_HAVE_IRQBUTTONS=y
CONTENT OF OUTPUT FILE END
Appended CONFIG_ARCH_CHIP_STM32H7=y to /workspaces/rtos_labs/nuttxspace/nuttx/tools/../.config
CONTENT OF OUTPUT FILE BEGIN

#
# This file is autogenerated: And created with custom comments..
#
# You can use "make menuconfig" to make any modifications to the installed .config file.
# You can then do "make savedefconfig" to generate a new defconfig file that includes your
# modifications.
#
# CONFIG_NSH_DISABLE_IFCONFIG is not set
# CONFIG_NSH_DISABLE_PS is not set
# CONFIG_STANDARD_SERIAL is not set
# CONFIG_STM32H7_USE_LEGACY_PINMAP is not set
CONFIG_ARCH="arm"
CONFIG_ARCH_BOARD_CUSTOM=y
CONFIG_ARCH_BOARD_CUSTOM_DIR="../../we-act-board-bringup/boards/arm/stm32h7/weact-stm32h743custom"
CONFIG_ARCH_BOARD_CUSTOM_NAME="weact-stm32h743custom"
CONFIG_ARCH_BOARD_CUSTOM_DIR_RELPATH=y
CONFIG_ARCH_HAVE_LEDS=y
CONFIG_ARCH_HAVE_BUTTONS=y
CONFIG_ARCH_HAVE_IRQBUTTONS=y
CONFIG_ARCH_CHIP_STM32H7=y
CONTENT OF OUTPUT FILE END
Appended CONFIG_ARCH_CHIP_STM32H7_CORTEXM7=y to /workspaces/rtos_labs/nuttxspace/nuttx/tools/../.config
CONTENT OF OUTPUT FILE BEGIN

#
# This file is autogenerated: And created with custom comments..
#
# You can use "make menuconfig" to make any modifications to the installed .config file.
# You can then do "make savedefconfig" to generate a new defconfig file that includes your
# modifications.
#
# CONFIG_NSH_DISABLE_IFCONFIG is not set
# CONFIG_NSH_DISABLE_PS is not set
# CONFIG_STANDARD_SERIAL is not set
# CONFIG_STM32H7_USE_LEGACY_PINMAP is not set
CONFIG_ARCH="arm"
CONFIG_ARCH_BOARD_CUSTOM=y
CONFIG_ARCH_BOARD_CUSTOM_DIR="../../we-act-board-bringup/boards/arm/stm32h7/weact-stm32h743custom"
CONFIG_ARCH_BOARD_CUSTOM_NAME="weact-stm32h743custom"
CONFIG_ARCH_BOARD_CUSTOM_DIR_RELPATH=y
CONFIG_ARCH_HAVE_LEDS=y
CONFIG_ARCH_HAVE_BUTTONS=y
CONFIG_ARCH_HAVE_IRQBUTTONS=y
CONFIG_ARCH_CHIP_STM32H7=y
CONFIG_ARCH_CHIP_STM32H7_CORTEXM7=y
CONTENT OF OUTPUT FILE END
Appended CONFIG_ARCH_STACKDUMP=y to /workspaces/rtos_labs/nuttxspace/nuttx/tools/../.config
CONTENT OF OUTPUT FILE BEGIN

#
# This file is autogenerated: And created with custom comments..
#
# You can use "make menuconfig" to make any modifications to the installed .config file.
# You can then do "make savedefconfig" to generate a new defconfig file that includes your
# modifications.
#
# CONFIG_NSH_DISABLE_IFCONFIG is not set
# CONFIG_NSH_DISABLE_PS is not set
# CONFIG_STANDARD_SERIAL is not set
# CONFIG_STM32H7_USE_LEGACY_PINMAP is not set
CONFIG_ARCH="arm"
CONFIG_ARCH_BOARD_CUSTOM=y
CONFIG_ARCH_BOARD_CUSTOM_DIR="../../we-act-board-bringup/boards/arm/stm32h7/weact-stm32h743custom"
CONFIG_ARCH_BOARD_CUSTOM_NAME="weact-stm32h743custom"
CONFIG_ARCH_BOARD_CUSTOM_DIR_RELPATH=y
CONFIG_ARCH_HAVE_LEDS=y
CONFIG_ARCH_HAVE_BUTTONS=y
CONFIG_ARCH_HAVE_IRQBUTTONS=y
CONFIG_ARCH_CHIP_STM32H7=y
CONFIG_ARCH_CHIP_STM32H7_CORTEXM7=y
CONFIG_ARCH_STACKDUMP=y
CONTENT OF OUTPUT FILE END
Appended CONFIG_ARMV7M_DCACHE=y to /workspaces/rtos_labs/nuttxspace/nuttx/tools/../.config
CONTENT OF OUTPUT FILE BEGIN

#
# This file is autogenerated: And created with custom comments..
#
# You can use "make menuconfig" to make any modifications to the installed .config file.
# You can then do "make savedefconfig" to generate a new defconfig file that includes your
# modifications.
#
# CONFIG_NSH_DISABLE_IFCONFIG is not set
# CONFIG_NSH_DISABLE_PS is not set
# CONFIG_STANDARD_SERIAL is not set
# CONFIG_STM32H7_USE_LEGACY_PINMAP is not set
CONFIG_ARCH="arm"
CONFIG_ARCH_BOARD_CUSTOM=y
CONFIG_ARCH_BOARD_CUSTOM_DIR="../../we-act-board-bringup/boards/arm/stm32h7/weact-stm32h743custom"
CONFIG_ARCH_BOARD_CUSTOM_NAME="weact-stm32h743custom"
CONFIG_ARCH_BOARD_CUSTOM_DIR_RELPATH=y
CONFIG_ARCH_HAVE_LEDS=y
CONFIG_ARCH_HAVE_BUTTONS=y
CONFIG_ARCH_HAVE_IRQBUTTONS=y
CONFIG_ARCH_CHIP_STM32H7=y
CONFIG_ARCH_CHIP_STM32H7_CORTEXM7=y
CONFIG_ARCH_STACKDUMP=y
CONFIG_ARMV7M_DCACHE=y
CONTENT OF OUTPUT FILE END
Appended CONFIG_ARMV7M_DCACHE_WRITETHROUGH=y to /workspaces/rtos_labs/nuttxspace/nuttx/tools/../.config
CONTENT OF OUTPUT FILE BEGIN

#
# This file is autogenerated: And created with custom comments..
#
# You can use "make menuconfig" to make any modifications to the installed .config file.
# You can then do "make savedefconfig" to generate a new defconfig file that includes your
# modifications.
#
# CONFIG_NSH_DISABLE_IFCONFIG is not set
# CONFIG_NSH_DISABLE_PS is not set
# CONFIG_STANDARD_SERIAL is not set
# CONFIG_STM32H7_USE_LEGACY_PINMAP is not set
CONFIG_ARCH="arm"
CONFIG_ARCH_BOARD_CUSTOM=y
CONFIG_ARCH_BOARD_CUSTOM_DIR="../../we-act-board-bringup/boards/arm/stm32h7/weact-stm32h743custom"
CONFIG_ARCH_BOARD_CUSTOM_NAME="weact-stm32h743custom"
CONFIG_ARCH_BOARD_CUSTOM_DIR_RELPATH=y
CONFIG_ARCH_HAVE_LEDS=y
CONFIG_ARCH_HAVE_BUTTONS=y
CONFIG_ARCH_HAVE_IRQBUTTONS=y
CONFIG_ARCH_CHIP_STM32H7=y
CONFIG_ARCH_CHIP_STM32H7_CORTEXM7=y
CONFIG_ARCH_STACKDUMP=y
CONFIG_ARMV7M_DCACHE=y
CONFIG_ARMV7M_DCACHE_WRITETHROUGH=y
CONTENT OF OUTPUT FILE END
Appended CONFIG_ARMV7M_DTCM=y to /workspaces/rtos_labs/nuttxspace/nuttx/tools/../.config
CONTENT OF OUTPUT FILE BEGIN

#
# This file is autogenerated: And created with custom comments..
#
# You can use "make menuconfig" to make any modifications to the installed .config file.
# You can then do "make savedefconfig" to generate a new defconfig file that includes your
# modifications.
#
# CONFIG_NSH_DISABLE_IFCONFIG is not set
# CONFIG_NSH_DISABLE_PS is not set
# CONFIG_STANDARD_SERIAL is not set
# CONFIG_STM32H7_USE_LEGACY_PINMAP is not set
CONFIG_ARCH="arm"
CONFIG_ARCH_BOARD_CUSTOM=y
CONFIG_ARCH_BOARD_CUSTOM_DIR="../../we-act-board-bringup/boards/arm/stm32h7/weact-stm32h743custom"
CONFIG_ARCH_BOARD_CUSTOM_NAME="weact-stm32h743custom"
CONFIG_ARCH_BOARD_CUSTOM_DIR_RELPATH=y
CONFIG_ARCH_HAVE_LEDS=y
CONFIG_ARCH_HAVE_BUTTONS=y
CONFIG_ARCH_HAVE_IRQBUTTONS=y
CONFIG_ARCH_CHIP_STM32H7=y
CONFIG_ARCH_CHIP_STM32H7_CORTEXM7=y
CONFIG_ARCH_STACKDUMP=y
CONFIG_ARMV7M_DCACHE=y
CONFIG_ARMV7M_DCACHE_WRITETHROUGH=y
CONFIG_ARMV7M_DTCM=y
CONTENT OF OUTPUT FILE END
Appended CONFIG_ARMV7M_ICACHE=y to /workspaces/rtos_labs/nuttxspace/nuttx/tools/../.config
CONTENT OF OUTPUT FILE BEGIN

#
# This file is autogenerated: And created with custom comments..
#
# You can use "make menuconfig" to make any modifications to the installed .config file.
# You can then do "make savedefconfig" to generate a new defconfig file that includes your
# modifications.
#
# CONFIG_NSH_DISABLE_IFCONFIG is not set
# CONFIG_NSH_DISABLE_PS is not set
# CONFIG_STANDARD_SERIAL is not set
# CONFIG_STM32H7_USE_LEGACY_PINMAP is not set
CONFIG_ARCH="arm"
CONFIG_ARCH_BOARD_CUSTOM=y
CONFIG_ARCH_BOARD_CUSTOM_DIR="../../we-act-board-bringup/boards/arm/stm32h7/weact-stm32h743custom"
CONFIG_ARCH_BOARD_CUSTOM_NAME="weact-stm32h743custom"
CONFIG_ARCH_BOARD_CUSTOM_DIR_RELPATH=y
CONFIG_ARCH_HAVE_LEDS=y
CONFIG_ARCH_HAVE_BUTTONS=y
CONFIG_ARCH_HAVE_IRQBUTTONS=y
CONFIG_ARCH_CHIP_STM32H7=y
CONFIG_ARCH_CHIP_STM32H7_CORTEXM7=y
CONFIG_ARCH_STACKDUMP=y
CONFIG_ARMV7M_DCACHE=y
CONFIG_ARMV7M_DCACHE_WRITETHROUGH=y
CONFIG_ARMV7M_DTCM=y
CONFIG_ARMV7M_ICACHE=y
CONTENT OF OUTPUT FILE END
Appended CONFIG_BOARD_LOOPSPERMSEC=43103 to /workspaces/rtos_labs/nuttxspace/nuttx/tools/../.config
CONTENT OF OUTPUT FILE BEGIN

#
# This file is autogenerated: And created with custom comments..
#
# You can use "make menuconfig" to make any modifications to the installed .config file.
# You can then do "make savedefconfig" to generate a new defconfig file that includes your
# modifications.
#
# CONFIG_NSH_DISABLE_IFCONFIG is not set
# CONFIG_NSH_DISABLE_PS is not set
# CONFIG_STANDARD_SERIAL is not set
# CONFIG_STM32H7_USE_LEGACY_PINMAP is not set
CONFIG_ARCH="arm"
CONFIG_ARCH_BOARD_CUSTOM=y
CONFIG_ARCH_BOARD_CUSTOM_DIR="../../we-act-board-bringup/boards/arm/stm32h7/weact-stm32h743custom"
CONFIG_ARCH_BOARD_CUSTOM_NAME="weact-stm32h743custom"
CONFIG_ARCH_BOARD_CUSTOM_DIR_RELPATH=y
CONFIG_ARCH_HAVE_LEDS=y
CONFIG_ARCH_HAVE_BUTTONS=y
CONFIG_ARCH_HAVE_IRQBUTTONS=y
CONFIG_ARCH_CHIP_STM32H7=y
CONFIG_ARCH_CHIP_STM32H7_CORTEXM7=y
CONFIG_ARCH_STACKDUMP=y
CONFIG_ARMV7M_DCACHE=y
CONFIG_ARMV7M_DCACHE_WRITETHROUGH=y
CONFIG_ARMV7M_DTCM=y
CONFIG_ARMV7M_ICACHE=y
CONFIG_BOARD_LOOPSPERMSEC=43103
CONTENT OF OUTPUT FILE END
Appended CONFIG_BUILTIN=y to /workspaces/rtos_labs/nuttxspace/nuttx/tools/../.config
CONTENT OF OUTPUT FILE BEGIN

#
# This file is autogenerated: And created with custom comments..
#
# You can use "make menuconfig" to make any modifications to the installed .config file.
# You can then do "make savedefconfig" to generate a new defconfig file that includes your
# modifications.
#
# CONFIG_NSH_DISABLE_IFCONFIG is not set
# CONFIG_NSH_DISABLE_PS is not set
# CONFIG_STANDARD_SERIAL is not set
# CONFIG_STM32H7_USE_LEGACY_PINMAP is not set
CONFIG_ARCH="arm"
CONFIG_ARCH_BOARD_CUSTOM=y
CONFIG_ARCH_BOARD_CUSTOM_DIR="../../we-act-board-bringup/boards/arm/stm32h7/weact-stm32h743custom"
CONFIG_ARCH_BOARD_CUSTOM_NAME="weact-stm32h743custom"
CONFIG_ARCH_BOARD_CUSTOM_DIR_RELPATH=y
CONFIG_ARCH_HAVE_LEDS=y
CONFIG_ARCH_HAVE_BUTTONS=y
CONFIG_ARCH_HAVE_IRQBUTTONS=y
CONFIG_ARCH_CHIP_STM32H7=y
CONFIG_ARCH_CHIP_STM32H7_CORTEXM7=y
CONFIG_ARCH_STACKDUMP=y
CONFIG_ARMV7M_DCACHE=y
CONFIG_ARMV7M_DCACHE_WRITETHROUGH=y
CONFIG_ARMV7M_DTCM=y
CONFIG_ARMV7M_ICACHE=y
CONFIG_BOARD_LOOPSPERMSEC=43103
CONFIG_BUILTIN=y
CONTENT OF OUTPUT FILE END
Appended CONFIG_DEBUG_SYMBOLS=y to /workspaces/rtos_labs/nuttxspace/nuttx/tools/../.config
CONTENT OF OUTPUT FILE BEGIN

#
# This file is autogenerated: And created with custom comments..
#
# You can use "make menuconfig" to make any modifications to the installed .config file.
# You can then do "make savedefconfig" to generate a new defconfig file that includes your
# modifications.
#
# CONFIG_NSH_DISABLE_IFCONFIG is not set
# CONFIG_NSH_DISABLE_PS is not set
# CONFIG_STANDARD_SERIAL is not set
# CONFIG_STM32H7_USE_LEGACY_PINMAP is not set
CONFIG_ARCH="arm"
CONFIG_ARCH_BOARD_CUSTOM=y
CONFIG_ARCH_BOARD_CUSTOM_DIR="../../we-act-board-bringup/boards/arm/stm32h7/weact-stm32h743custom"
CONFIG_ARCH_BOARD_CUSTOM_NAME="weact-stm32h743custom"
CONFIG_ARCH_BOARD_CUSTOM_DIR_RELPATH=y
CONFIG_ARCH_HAVE_LEDS=y
CONFIG_ARCH_HAVE_BUTTONS=y
CONFIG_ARCH_HAVE_IRQBUTTONS=y
CONFIG_ARCH_CHIP_STM32H7=y
CONFIG_ARCH_CHIP_STM32H7_CORTEXM7=y
CONFIG_ARCH_STACKDUMP=y
CONFIG_ARMV7M_DCACHE=y
CONFIG_ARMV7M_DCACHE_WRITETHROUGH=y
CONFIG_ARMV7M_DTCM=y
CONFIG_ARMV7M_ICACHE=y
CONFIG_BOARD_LOOPSPERMSEC=43103
CONFIG_BUILTIN=y
CONFIG_DEBUG_SYMBOLS=y
CONTENT OF OUTPUT FILE END
Appended CONFIG_EXPERIMENTAL=y to /workspaces/rtos_labs/nuttxspace/nuttx/tools/../.config
CONTENT OF OUTPUT FILE BEGIN

#
# This file is autogenerated: And created with custom comments..
#
# You can use "make menuconfig" to make any modifications to the installed .config file.
# You can then do "make savedefconfig" to generate a new defconfig file that includes your
# modifications.
#
# CONFIG_NSH_DISABLE_IFCONFIG is not set
# CONFIG_NSH_DISABLE_PS is not set
# CONFIG_STANDARD_SERIAL is not set
# CONFIG_STM32H7_USE_LEGACY_PINMAP is not set
CONFIG_ARCH="arm"
CONFIG_ARCH_BOARD_CUSTOM=y
CONFIG_ARCH_BOARD_CUSTOM_DIR="../../we-act-board-bringup/boards/arm/stm32h7/weact-stm32h743custom"
CONFIG_ARCH_BOARD_CUSTOM_NAME="weact-stm32h743custom"
CONFIG_ARCH_BOARD_CUSTOM_DIR_RELPATH=y
CONFIG_ARCH_HAVE_LEDS=y
CONFIG_ARCH_HAVE_BUTTONS=y
CONFIG_ARCH_HAVE_IRQBUTTONS=y
CONFIG_ARCH_CHIP_STM32H7=y
CONFIG_ARCH_CHIP_STM32H7_CORTEXM7=y
CONFIG_ARCH_STACKDUMP=y
CONFIG_ARMV7M_DCACHE=y
CONFIG_ARMV7M_DCACHE_WRITETHROUGH=y
CONFIG_ARMV7M_DTCM=y
CONFIG_ARMV7M_ICACHE=y
CONFIG_BOARD_LOOPSPERMSEC=43103
CONFIG_BUILTIN=y
CONFIG_DEBUG_SYMBOLS=y
CONFIG_EXPERIMENTAL=y
CONTENT OF OUTPUT FILE END
Appended CONFIG_HAVE_CXX=y to /workspaces/rtos_labs/nuttxspace/nuttx/tools/../.config
CONTENT OF OUTPUT FILE BEGIN

#
# This file is autogenerated: And created with custom comments..
#
# You can use "make menuconfig" to make any modifications to the installed .config file.
# You can then do "make savedefconfig" to generate a new defconfig file that includes your
# modifications.
#
# CONFIG_NSH_DISABLE_IFCONFIG is not set
# CONFIG_NSH_DISABLE_PS is not set
# CONFIG_STANDARD_SERIAL is not set
# CONFIG_STM32H7_USE_LEGACY_PINMAP is not set
CONFIG_ARCH="arm"
CONFIG_ARCH_BOARD_CUSTOM=y
CONFIG_ARCH_BOARD_CUSTOM_DIR="../../we-act-board-bringup/boards/arm/stm32h7/weact-stm32h743custom"
CONFIG_ARCH_BOARD_CUSTOM_NAME="weact-stm32h743custom"
CONFIG_ARCH_BOARD_CUSTOM_DIR_RELPATH=y
CONFIG_ARCH_HAVE_LEDS=y
CONFIG_ARCH_HAVE_BUTTONS=y
CONFIG_ARCH_HAVE_IRQBUTTONS=y
CONFIG_ARCH_CHIP_STM32H7=y
CONFIG_ARCH_CHIP_STM32H7_CORTEXM7=y
CONFIG_ARCH_STACKDUMP=y
CONFIG_ARMV7M_DCACHE=y
CONFIG_ARMV7M_DCACHE_WRITETHROUGH=y
CONFIG_ARMV7M_DTCM=y
CONFIG_ARMV7M_ICACHE=y
CONFIG_BOARD_LOOPSPERMSEC=43103
CONFIG_BUILTIN=y
CONFIG_DEBUG_SYMBOLS=y
CONFIG_EXPERIMENTAL=y
CONFIG_HAVE_CXX=y
CONTENT OF OUTPUT FILE END
Appended CONFIG_HAVE_CXXINITIALIZE=y to /workspaces/rtos_labs/nuttxspace/nuttx/tools/../.config
CONTENT OF OUTPUT FILE BEGIN

#
# This file is autogenerated: And created with custom comments..
#
# You can use "make menuconfig" to make any modifications to the installed .config file.
# You can then do "make savedefconfig" to generate a new defconfig file that includes your
# modifications.
#
# CONFIG_NSH_DISABLE_IFCONFIG is not set
# CONFIG_NSH_DISABLE_PS is not set
# CONFIG_STANDARD_SERIAL is not set
# CONFIG_STM32H7_USE_LEGACY_PINMAP is not set
CONFIG_ARCH="arm"
CONFIG_ARCH_BOARD_CUSTOM=y
CONFIG_ARCH_BOARD_CUSTOM_DIR="../../we-act-board-bringup/boards/arm/stm32h7/weact-stm32h743custom"
CONFIG_ARCH_BOARD_CUSTOM_NAME="weact-stm32h743custom"
CONFIG_ARCH_BOARD_CUSTOM_DIR_RELPATH=y
CONFIG_ARCH_HAVE_LEDS=y
CONFIG_ARCH_HAVE_BUTTONS=y
CONFIG_ARCH_HAVE_IRQBUTTONS=y
CONFIG_ARCH_CHIP_STM32H7=y
CONFIG_ARCH_CHIP_STM32H7_CORTEXM7=y
CONFIG_ARCH_STACKDUMP=y
CONFIG_ARMV7M_DCACHE=y
CONFIG_ARMV7M_DCACHE_WRITETHROUGH=y
CONFIG_ARMV7M_DTCM=y
CONFIG_ARMV7M_ICACHE=y
CONFIG_BOARD_LOOPSPERMSEC=43103
CONFIG_BUILTIN=y
CONFIG_DEBUG_SYMBOLS=y
CONFIG_EXPERIMENTAL=y
CONFIG_HAVE_CXX=y
CONFIG_HAVE_CXXINITIALIZE=y
CONTENT OF OUTPUT FILE END
Appended CONFIG_INIT_ENTRYPOINT="nsh_main" to /workspaces/rtos_labs/nuttxspace/nuttx/tools/../.config
CONTENT OF OUTPUT FILE BEGIN

#
# This file is autogenerated: And created with custom comments..
#
# You can use "make menuconfig" to make any modifications to the installed .config file.
# You can then do "make savedefconfig" to generate a new defconfig file that includes your
# modifications.
#
# CONFIG_NSH_DISABLE_IFCONFIG is not set
# CONFIG_NSH_DISABLE_PS is not set
# CONFIG_STANDARD_SERIAL is not set
# CONFIG_STM32H7_USE_LEGACY_PINMAP is not set
CONFIG_ARCH="arm"
CONFIG_ARCH_BOARD_CUSTOM=y
CONFIG_ARCH_BOARD_CUSTOM_DIR="../../we-act-board-bringup/boards/arm/stm32h7/weact-stm32h743custom"
CONFIG_ARCH_BOARD_CUSTOM_NAME="weact-stm32h743custom"
CONFIG_ARCH_BOARD_CUSTOM_DIR_RELPATH=y
CONFIG_ARCH_HAVE_LEDS=y
CONFIG_ARCH_HAVE_BUTTONS=y
CONFIG_ARCH_HAVE_IRQBUTTONS=y
CONFIG_ARCH_CHIP_STM32H7=y
CONFIG_ARCH_CHIP_STM32H7_CORTEXM7=y
CONFIG_ARCH_STACKDUMP=y
CONFIG_ARMV7M_DCACHE=y
CONFIG_ARMV7M_DCACHE_WRITETHROUGH=y
CONFIG_ARMV7M_DTCM=y
CONFIG_ARMV7M_ICACHE=y
CONFIG_BOARD_LOOPSPERMSEC=43103
CONFIG_BUILTIN=y
CONFIG_DEBUG_SYMBOLS=y
CONFIG_EXPERIMENTAL=y
CONFIG_HAVE_CXX=y
CONFIG_HAVE_CXXINITIALIZE=y
CONFIG_INIT_ENTRYPOINT="nsh_main"
CONTENT OF OUTPUT FILE END
Appended CONFIG_INTELHEX_BINARY=y to /workspaces/rtos_labs/nuttxspace/nuttx/tools/../.config
CONTENT OF OUTPUT FILE BEGIN

#
# This file is autogenerated: And created with custom comments..
#
# You can use "make menuconfig" to make any modifications to the installed .config file.
# You can then do "make savedefconfig" to generate a new defconfig file that includes your
# modifications.
#
# CONFIG_NSH_DISABLE_IFCONFIG is not set
# CONFIG_NSH_DISABLE_PS is not set
# CONFIG_STANDARD_SERIAL is not set
# CONFIG_STM32H7_USE_LEGACY_PINMAP is not set
CONFIG_ARCH="arm"
CONFIG_ARCH_BOARD_CUSTOM=y
CONFIG_ARCH_BOARD_CUSTOM_DIR="../../we-act-board-bringup/boards/arm/stm32h7/weact-stm32h743custom"
CONFIG_ARCH_BOARD_CUSTOM_NAME="weact-stm32h743custom"
CONFIG_ARCH_BOARD_CUSTOM_DIR_RELPATH=y
CONFIG_ARCH_HAVE_LEDS=y
CONFIG_ARCH_HAVE_BUTTONS=y
CONFIG_ARCH_HAVE_IRQBUTTONS=y
CONFIG_ARCH_CHIP_STM32H7=y
CONFIG_ARCH_CHIP_STM32H7_CORTEXM7=y
CONFIG_ARCH_STACKDUMP=y
CONFIG_ARMV7M_DCACHE=y
CONFIG_ARMV7M_DCACHE_WRITETHROUGH=y
CONFIG_ARMV7M_DTCM=y
CONFIG_ARMV7M_ICACHE=y
CONFIG_BOARD_LOOPSPERMSEC=43103
CONFIG_BUILTIN=y
CONFIG_DEBUG_SYMBOLS=y
CONFIG_EXPERIMENTAL=y
CONFIG_HAVE_CXX=y
CONFIG_HAVE_CXXINITIALIZE=y
CONFIG_INIT_ENTRYPOINT="nsh_main"
CONFIG_INTELHEX_BINARY=y
CONTENT OF OUTPUT FILE END
Appended CONFIG_LINE_MAX=64 to /workspaces/rtos_labs/nuttxspace/nuttx/tools/../.config
CONTENT OF OUTPUT FILE BEGIN

#
# This file is autogenerated: And created with custom comments..
#
# You can use "make menuconfig" to make any modifications to the installed .config file.
# You can then do "make savedefconfig" to generate a new defconfig file that includes your
# modifications.
#
# CONFIG_NSH_DISABLE_IFCONFIG is not set
# CONFIG_NSH_DISABLE_PS is not set
# CONFIG_STANDARD_SERIAL is not set
# CONFIG_STM32H7_USE_LEGACY_PINMAP is not set
CONFIG_ARCH="arm"
CONFIG_ARCH_BOARD_CUSTOM=y
CONFIG_ARCH_BOARD_CUSTOM_DIR="../../we-act-board-bringup/boards/arm/stm32h7/weact-stm32h743custom"
CONFIG_ARCH_BOARD_CUSTOM_NAME="weact-stm32h743custom"
CONFIG_ARCH_BOARD_CUSTOM_DIR_RELPATH=y
CONFIG_ARCH_HAVE_LEDS=y
CONFIG_ARCH_HAVE_BUTTONS=y
CONFIG_ARCH_HAVE_IRQBUTTONS=y
CONFIG_ARCH_CHIP_STM32H7=y
CONFIG_ARCH_CHIP_STM32H7_CORTEXM7=y
CONFIG_ARCH_STACKDUMP=y
CONFIG_ARMV7M_DCACHE=y
CONFIG_ARMV7M_DCACHE_WRITETHROUGH=y
CONFIG_ARMV7M_DTCM=y
CONFIG_ARMV7M_ICACHE=y
CONFIG_BOARD_LOOPSPERMSEC=43103
CONFIG_BUILTIN=y
CONFIG_DEBUG_SYMBOLS=y
CONFIG_EXPERIMENTAL=y
CONFIG_HAVE_CXX=y
CONFIG_HAVE_CXXINITIALIZE=y
CONFIG_INIT_ENTRYPOINT="nsh_main"
CONFIG_INTELHEX_BINARY=y
CONFIG_LINE_MAX=64
CONTENT OF OUTPUT FILE END
Appended CONFIG_MM_REGIONS=4 to /workspaces/rtos_labs/nuttxspace/nuttx/tools/../.config
CONTENT OF OUTPUT FILE BEGIN

#
# This file is autogenerated: And created with custom comments..
#
# You can use "make menuconfig" to make any modifications to the installed .config file.
# You can then do "make savedefconfig" to generate a new defconfig file that includes your
# modifications.
#
# CONFIG_NSH_DISABLE_IFCONFIG is not set
# CONFIG_NSH_DISABLE_PS is not set
# CONFIG_STANDARD_SERIAL is not set
# CONFIG_STM32H7_USE_LEGACY_PINMAP is not set
CONFIG_ARCH="arm"
CONFIG_ARCH_BOARD_CUSTOM=y
CONFIG_ARCH_BOARD_CUSTOM_DIR="../../we-act-board-bringup/boards/arm/stm32h7/weact-stm32h743custom"
CONFIG_ARCH_BOARD_CUSTOM_NAME="weact-stm32h743custom"
CONFIG_ARCH_BOARD_CUSTOM_DIR_RELPATH=y
CONFIG_ARCH_HAVE_LEDS=y
CONFIG_ARCH_HAVE_BUTTONS=y
CONFIG_ARCH_HAVE_IRQBUTTONS=y
CONFIG_ARCH_CHIP_STM32H7=y
CONFIG_ARCH_CHIP_STM32H7_CORTEXM7=y
CONFIG_ARCH_STACKDUMP=y
CONFIG_ARMV7M_DCACHE=y
CONFIG_ARMV7M_DCACHE_WRITETHROUGH=y
CONFIG_ARMV7M_DTCM=y
CONFIG_ARMV7M_ICACHE=y
CONFIG_BOARD_LOOPSPERMSEC=43103
CONFIG_BUILTIN=y
CONFIG_DEBUG_SYMBOLS=y
CONFIG_EXPERIMENTAL=y
CONFIG_HAVE_CXX=y
CONFIG_HAVE_CXXINITIALIZE=y
CONFIG_INIT_ENTRYPOINT="nsh_main"
CONFIG_INTELHEX_BINARY=y
CONFIG_LINE_MAX=64
CONFIG_MM_REGIONS=4
CONTENT OF OUTPUT FILE END
Appended CONFIG_NSH_BUILTIN_APPS=y to /workspaces/rtos_labs/nuttxspace/nuttx/tools/../.config
CONTENT OF OUTPUT FILE BEGIN

#
# This file is autogenerated: And created with custom comments..
#
# You can use "make menuconfig" to make any modifications to the installed .config file.
# You can then do "make savedefconfig" to generate a new defconfig file that includes your
# modifications.
#
# CONFIG_NSH_DISABLE_IFCONFIG is not set
# CONFIG_NSH_DISABLE_PS is not set
# CONFIG_STANDARD_SERIAL is not set
# CONFIG_STM32H7_USE_LEGACY_PINMAP is not set
CONFIG_ARCH="arm"
CONFIG_ARCH_BOARD_CUSTOM=y
CONFIG_ARCH_BOARD_CUSTOM_DIR="../../we-act-board-bringup/boards/arm/stm32h7/weact-stm32h743custom"
CONFIG_ARCH_BOARD_CUSTOM_NAME="weact-stm32h743custom"
CONFIG_ARCH_BOARD_CUSTOM_DIR_RELPATH=y
CONFIG_ARCH_HAVE_LEDS=y
CONFIG_ARCH_HAVE_BUTTONS=y
CONFIG_ARCH_HAVE_IRQBUTTONS=y
CONFIG_ARCH_CHIP_STM32H7=y
CONFIG_ARCH_CHIP_STM32H7_CORTEXM7=y
CONFIG_ARCH_STACKDUMP=y
CONFIG_ARMV7M_DCACHE=y
CONFIG_ARMV7M_DCACHE_WRITETHROUGH=y
CONFIG_ARMV7M_DTCM=y
CONFIG_ARMV7M_ICACHE=y
CONFIG_BOARD_LOOPSPERMSEC=43103
CONFIG_BUILTIN=y
CONFIG_DEBUG_SYMBOLS=y
CONFIG_EXPERIMENTAL=y
CONFIG_HAVE_CXX=y
CONFIG_HAVE_CXXINITIALIZE=y
CONFIG_INIT_ENTRYPOINT="nsh_main"
CONFIG_INTELHEX_BINARY=y
CONFIG_LINE_MAX=64
CONFIG_MM_REGIONS=4
CONFIG_NSH_BUILTIN_APPS=y
CONTENT OF OUTPUT FILE END
Appended CONFIG_NSH_FILEIOSIZE=512 to /workspaces/rtos_labs/nuttxspace/nuttx/tools/../.config
CONTENT OF OUTPUT FILE BEGIN

#
# This file is autogenerated: And created with custom comments..
#
# You can use "make menuconfig" to make any modifications to the installed .config file.
# You can then do "make savedefconfig" to generate a new defconfig file that includes your
# modifications.
#
# CONFIG_NSH_DISABLE_IFCONFIG is not set
# CONFIG_NSH_DISABLE_PS is not set
# CONFIG_STANDARD_SERIAL is not set
# CONFIG_STM32H7_USE_LEGACY_PINMAP is not set
CONFIG_ARCH="arm"
CONFIG_ARCH_BOARD_CUSTOM=y
CONFIG_ARCH_BOARD_CUSTOM_DIR="../../we-act-board-bringup/boards/arm/stm32h7/weact-stm32h743custom"
CONFIG_ARCH_BOARD_CUSTOM_NAME="weact-stm32h743custom"
CONFIG_ARCH_BOARD_CUSTOM_DIR_RELPATH=y
CONFIG_ARCH_HAVE_LEDS=y
CONFIG_ARCH_HAVE_BUTTONS=y
CONFIG_ARCH_HAVE_IRQBUTTONS=y
CONFIG_ARCH_CHIP_STM32H7=y
CONFIG_ARCH_CHIP_STM32H7_CORTEXM7=y
CONFIG_ARCH_STACKDUMP=y
CONFIG_ARMV7M_DCACHE=y
CONFIG_ARMV7M_DCACHE_WRITETHROUGH=y
CONFIG_ARMV7M_DTCM=y
CONFIG_ARMV7M_ICACHE=y
CONFIG_BOARD_LOOPSPERMSEC=43103
CONFIG_BUILTIN=y
CONFIG_DEBUG_SYMBOLS=y
CONFIG_EXPERIMENTAL=y
CONFIG_HAVE_CXX=y
CONFIG_HAVE_CXXINITIALIZE=y
CONFIG_INIT_ENTRYPOINT="nsh_main"
CONFIG_INTELHEX_BINARY=y
CONFIG_LINE_MAX=64
CONFIG_MM_REGIONS=4
CONFIG_NSH_BUILTIN_APPS=y
CONFIG_NSH_FILEIOSIZE=512
CONTENT OF OUTPUT FILE END
Appended CONFIG_NSH_READLINE=y to /workspaces/rtos_labs/nuttxspace/nuttx/tools/../.config
CONTENT OF OUTPUT FILE BEGIN

#
# This file is autogenerated: And created with custom comments..
#
# You can use "make menuconfig" to make any modifications to the installed .config file.
# You can then do "make savedefconfig" to generate a new defconfig file that includes your
# modifications.
#
# CONFIG_NSH_DISABLE_IFCONFIG is not set
# CONFIG_NSH_DISABLE_PS is not set
# CONFIG_STANDARD_SERIAL is not set
# CONFIG_STM32H7_USE_LEGACY_PINMAP is not set
CONFIG_ARCH="arm"
CONFIG_ARCH_BOARD_CUSTOM=y
CONFIG_ARCH_BOARD_CUSTOM_DIR="../../we-act-board-bringup/boards/arm/stm32h7/weact-stm32h743custom"
CONFIG_ARCH_BOARD_CUSTOM_NAME="weact-stm32h743custom"
CONFIG_ARCH_BOARD_CUSTOM_DIR_RELPATH=y
CONFIG_ARCH_HAVE_LEDS=y
CONFIG_ARCH_HAVE_BUTTONS=y
CONFIG_ARCH_HAVE_IRQBUTTONS=y
CONFIG_ARCH_CHIP_STM32H7=y
CONFIG_ARCH_CHIP_STM32H7_CORTEXM7=y
CONFIG_ARCH_STACKDUMP=y
CONFIG_ARMV7M_DCACHE=y
CONFIG_ARMV7M_DCACHE_WRITETHROUGH=y
CONFIG_ARMV7M_DTCM=y
CONFIG_ARMV7M_ICACHE=y
CONFIG_BOARD_LOOPSPERMSEC=43103
CONFIG_BUILTIN=y
CONFIG_DEBUG_SYMBOLS=y
CONFIG_EXPERIMENTAL=y
CONFIG_HAVE_CXX=y
CONFIG_HAVE_CXXINITIALIZE=y
CONFIG_INIT_ENTRYPOINT="nsh_main"
CONFIG_INTELHEX_BINARY=y
CONFIG_LINE_MAX=64
CONFIG_MM_REGIONS=4
CONFIG_NSH_BUILTIN_APPS=y
CONFIG_NSH_FILEIOSIZE=512
CONFIG_NSH_READLINE=y
CONTENT OF OUTPUT FILE END
Appended CONFIG_PREALLOC_TIMERS=4 to /workspaces/rtos_labs/nuttxspace/nuttx/tools/../.config
CONTENT OF OUTPUT FILE BEGIN

#
# This file is autogenerated: And created with custom comments..
#
# You can use "make menuconfig" to make any modifications to the installed .config file.
# You can then do "make savedefconfig" to generate a new defconfig file that includes your
# modifications.
#
# CONFIG_NSH_DISABLE_IFCONFIG is not set
# CONFIG_NSH_DISABLE_PS is not set
# CONFIG_STANDARD_SERIAL is not set
# CONFIG_STM32H7_USE_LEGACY_PINMAP is not set
CONFIG_ARCH="arm"
CONFIG_ARCH_BOARD_CUSTOM=y
CONFIG_ARCH_BOARD_CUSTOM_DIR="../../we-act-board-bringup/boards/arm/stm32h7/weact-stm32h743custom"
CONFIG_ARCH_BOARD_CUSTOM_NAME="weact-stm32h743custom"
CONFIG_ARCH_BOARD_CUSTOM_DIR_RELPATH=y
CONFIG_ARCH_HAVE_LEDS=y
CONFIG_ARCH_HAVE_BUTTONS=y
CONFIG_ARCH_HAVE_IRQBUTTONS=y
CONFIG_ARCH_CHIP_STM32H7=y
CONFIG_ARCH_CHIP_STM32H7_CORTEXM7=y
CONFIG_ARCH_STACKDUMP=y
CONFIG_ARMV7M_DCACHE=y
CONFIG_ARMV7M_DCACHE_WRITETHROUGH=y
CONFIG_ARMV7M_DTCM=y
CONFIG_ARMV7M_ICACHE=y
CONFIG_BOARD_LOOPSPERMSEC=43103
CONFIG_BUILTIN=y
CONFIG_DEBUG_SYMBOLS=y
CONFIG_EXPERIMENTAL=y
CONFIG_HAVE_CXX=y
CONFIG_HAVE_CXXINITIALIZE=y
CONFIG_INIT_ENTRYPOINT="nsh_main"
CONFIG_INTELHEX_BINARY=y
CONFIG_LINE_MAX=64
CONFIG_MM_REGIONS=4
CONFIG_NSH_BUILTIN_APPS=y
CONFIG_NSH_FILEIOSIZE=512
CONFIG_NSH_READLINE=y
CONFIG_PREALLOC_TIMERS=4
CONTENT OF OUTPUT FILE END
Appended CONFIG_RAM_SIZE=245760 to /workspaces/rtos_labs/nuttxspace/nuttx/tools/../.config
CONTENT OF OUTPUT FILE BEGIN

#
# This file is autogenerated: And created with custom comments..
#
# You can use "make menuconfig" to make any modifications to the installed .config file.
# You can then do "make savedefconfig" to generate a new defconfig file that includes your
# modifications.
#
# CONFIG_NSH_DISABLE_IFCONFIG is not set
# CONFIG_NSH_DISABLE_PS is not set
# CONFIG_STANDARD_SERIAL is not set
# CONFIG_STM32H7_USE_LEGACY_PINMAP is not set
CONFIG_ARCH="arm"
CONFIG_ARCH_BOARD_CUSTOM=y
CONFIG_ARCH_BOARD_CUSTOM_DIR="../../we-act-board-bringup/boards/arm/stm32h7/weact-stm32h743custom"
CONFIG_ARCH_BOARD_CUSTOM_NAME="weact-stm32h743custom"
CONFIG_ARCH_BOARD_CUSTOM_DIR_RELPATH=y
CONFIG_ARCH_HAVE_LEDS=y
CONFIG_ARCH_HAVE_BUTTONS=y
CONFIG_ARCH_HAVE_IRQBUTTONS=y
CONFIG_ARCH_CHIP_STM32H7=y
CONFIG_ARCH_CHIP_STM32H7_CORTEXM7=y
CONFIG_ARCH_STACKDUMP=y
CONFIG_ARMV7M_DCACHE=y
CONFIG_ARMV7M_DCACHE_WRITETHROUGH=y
CONFIG_ARMV7M_DTCM=y
CONFIG_ARMV7M_ICACHE=y
CONFIG_BOARD_LOOPSPERMSEC=43103
CONFIG_BUILTIN=y
CONFIG_DEBUG_SYMBOLS=y
CONFIG_EXPERIMENTAL=y
CONFIG_HAVE_CXX=y
CONFIG_HAVE_CXXINITIALIZE=y
CONFIG_INIT_ENTRYPOINT="nsh_main"
CONFIG_INTELHEX_BINARY=y
CONFIG_LINE_MAX=64
CONFIG_MM_REGIONS=4
CONFIG_NSH_BUILTIN_APPS=y
CONFIG_NSH_FILEIOSIZE=512
CONFIG_NSH_READLINE=y
CONFIG_PREALLOC_TIMERS=4
CONFIG_RAM_SIZE=245760
CONTENT OF OUTPUT FILE END
Appended CONFIG_RAM_START=0x20010000 to /workspaces/rtos_labs/nuttxspace/nuttx/tools/../.config
CONTENT OF OUTPUT FILE BEGIN

#
# This file is autogenerated: And created with custom comments..
#
# You can use "make menuconfig" to make any modifications to the installed .config file.
# You can then do "make savedefconfig" to generate a new defconfig file that includes your
# modifications.
#
# CONFIG_NSH_DISABLE_IFCONFIG is not set
# CONFIG_NSH_DISABLE_PS is not set
# CONFIG_STANDARD_SERIAL is not set
# CONFIG_STM32H7_USE_LEGACY_PINMAP is not set
CONFIG_ARCH="arm"
CONFIG_ARCH_BOARD_CUSTOM=y
CONFIG_ARCH_BOARD_CUSTOM_DIR="../../we-act-board-bringup/boards/arm/stm32h7/weact-stm32h743custom"
CONFIG_ARCH_BOARD_CUSTOM_NAME="weact-stm32h743custom"
CONFIG_ARCH_BOARD_CUSTOM_DIR_RELPATH=y
CONFIG_ARCH_HAVE_LEDS=y
CONFIG_ARCH_HAVE_BUTTONS=y
CONFIG_ARCH_HAVE_IRQBUTTONS=y
CONFIG_ARCH_CHIP_STM32H7=y
CONFIG_ARCH_CHIP_STM32H7_CORTEXM7=y
CONFIG_ARCH_STACKDUMP=y
CONFIG_ARMV7M_DCACHE=y
CONFIG_ARMV7M_DCACHE_WRITETHROUGH=y
CONFIG_ARMV7M_DTCM=y
CONFIG_ARMV7M_ICACHE=y
CONFIG_BOARD_LOOPSPERMSEC=43103
CONFIG_BUILTIN=y
CONFIG_DEBUG_SYMBOLS=y
CONFIG_EXPERIMENTAL=y
CONFIG_HAVE_CXX=y
CONFIG_HAVE_CXXINITIALIZE=y
CONFIG_INIT_ENTRYPOINT="nsh_main"
CONFIG_INTELHEX_BINARY=y
CONFIG_LINE_MAX=64
CONFIG_MM_REGIONS=4
CONFIG_NSH_BUILTIN_APPS=y
CONFIG_NSH_FILEIOSIZE=512
CONFIG_NSH_READLINE=y
CONFIG_PREALLOC_TIMERS=4
CONFIG_RAM_SIZE=245760
CONFIG_RAM_START=0x20010000
CONTENT OF OUTPUT FILE END
Appended CONFIG_RAW_BINARY=y to /workspaces/rtos_labs/nuttxspace/nuttx/tools/../.config
CONTENT OF OUTPUT FILE BEGIN

#
# This file is autogenerated: And created with custom comments..
#
# You can use "make menuconfig" to make any modifications to the installed .config file.
# You can then do "make savedefconfig" to generate a new defconfig file that includes your
# modifications.
#
# CONFIG_NSH_DISABLE_IFCONFIG is not set
# CONFIG_NSH_DISABLE_PS is not set
# CONFIG_STANDARD_SERIAL is not set
# CONFIG_STM32H7_USE_LEGACY_PINMAP is not set
CONFIG_ARCH="arm"
CONFIG_ARCH_BOARD_CUSTOM=y
CONFIG_ARCH_BOARD_CUSTOM_DIR="../../we-act-board-bringup/boards/arm/stm32h7/weact-stm32h743custom"
CONFIG_ARCH_BOARD_CUSTOM_NAME="weact-stm32h743custom"
CONFIG_ARCH_BOARD_CUSTOM_DIR_RELPATH=y
CONFIG_ARCH_HAVE_LEDS=y
CONFIG_ARCH_HAVE_BUTTONS=y
CONFIG_ARCH_HAVE_IRQBUTTONS=y
CONFIG_ARCH_CHIP_STM32H7=y
CONFIG_ARCH_CHIP_STM32H7_CORTEXM7=y
CONFIG_ARCH_STACKDUMP=y
CONFIG_ARMV7M_DCACHE=y
CONFIG_ARMV7M_DCACHE_WRITETHROUGH=y
CONFIG_ARMV7M_DTCM=y
CONFIG_ARMV7M_ICACHE=y
CONFIG_BOARD_LOOPSPERMSEC=43103
CONFIG_BUILTIN=y
CONFIG_DEBUG_SYMBOLS=y
CONFIG_EXPERIMENTAL=y
CONFIG_HAVE_CXX=y
CONFIG_HAVE_CXXINITIALIZE=y
CONFIG_INIT_ENTRYPOINT="nsh_main"
CONFIG_INTELHEX_BINARY=y
CONFIG_LINE_MAX=64
CONFIG_MM_REGIONS=4
CONFIG_NSH_BUILTIN_APPS=y
CONFIG_NSH_FILEIOSIZE=512
CONFIG_NSH_READLINE=y
CONFIG_PREALLOC_TIMERS=4
CONFIG_RAM_SIZE=245760
CONFIG_RAM_START=0x20010000
CONFIG_RAW_BINARY=y
CONTENT OF OUTPUT FILE END
Appended CONFIG_RR_INTERVAL=200 to /workspaces/rtos_labs/nuttxspace/nuttx/tools/../.config
CONTENT OF OUTPUT FILE BEGIN

#
# This file is autogenerated: And created with custom comments..
#
# You can use "make menuconfig" to make any modifications to the installed .config file.
# You can then do "make savedefconfig" to generate a new defconfig file that includes your
# modifications.
#
# CONFIG_NSH_DISABLE_IFCONFIG is not set
# CONFIG_NSH_DISABLE_PS is not set
# CONFIG_STANDARD_SERIAL is not set
# CONFIG_STM32H7_USE_LEGACY_PINMAP is not set
CONFIG_ARCH="arm"
CONFIG_ARCH_BOARD_CUSTOM=y
CONFIG_ARCH_BOARD_CUSTOM_DIR="../../we-act-board-bringup/boards/arm/stm32h7/weact-stm32h743custom"
CONFIG_ARCH_BOARD_CUSTOM_NAME="weact-stm32h743custom"
CONFIG_ARCH_BOARD_CUSTOM_DIR_RELPATH=y
CONFIG_ARCH_HAVE_LEDS=y
CONFIG_ARCH_HAVE_BUTTONS=y
CONFIG_ARCH_HAVE_IRQBUTTONS=y
CONFIG_ARCH_CHIP_STM32H7=y
CONFIG_ARCH_CHIP_STM32H7_CORTEXM7=y
CONFIG_ARCH_STACKDUMP=y
CONFIG_ARMV7M_DCACHE=y
CONFIG_ARMV7M_DCACHE_WRITETHROUGH=y
CONFIG_ARMV7M_DTCM=y
CONFIG_ARMV7M_ICACHE=y
CONFIG_BOARD_LOOPSPERMSEC=43103
CONFIG_BUILTIN=y
CONFIG_DEBUG_SYMBOLS=y
CONFIG_EXPERIMENTAL=y
CONFIG_HAVE_CXX=y
CONFIG_HAVE_CXXINITIALIZE=y
CONFIG_INIT_ENTRYPOINT="nsh_main"
CONFIG_INTELHEX_BINARY=y
CONFIG_LINE_MAX=64
CONFIG_MM_REGIONS=4
CONFIG_NSH_BUILTIN_APPS=y
CONFIG_NSH_FILEIOSIZE=512
CONFIG_NSH_READLINE=y
CONFIG_PREALLOC_TIMERS=4
CONFIG_RAM_SIZE=245760
CONFIG_RAM_START=0x20010000
CONFIG_RAW_BINARY=y
CONFIG_RR_INTERVAL=200
CONTENT OF OUTPUT FILE END
Appended CONFIG_SCHED_WAITPID=y to /workspaces/rtos_labs/nuttxspace/nuttx/tools/../.config
CONTENT OF OUTPUT FILE BEGIN

#
# This file is autogenerated: And created with custom comments..
#
# You can use "make menuconfig" to make any modifications to the installed .config file.
# You can then do "make savedefconfig" to generate a new defconfig file that includes your
# modifications.
#
# CONFIG_NSH_DISABLE_IFCONFIG is not set
# CONFIG_NSH_DISABLE_PS is not set
# CONFIG_STANDARD_SERIAL is not set
# CONFIG_STM32H7_USE_LEGACY_PINMAP is not set
CONFIG_ARCH="arm"
CONFIG_ARCH_BOARD_CUSTOM=y
CONFIG_ARCH_BOARD_CUSTOM_DIR="../../we-act-board-bringup/boards/arm/stm32h7/weact-stm32h743custom"
CONFIG_ARCH_BOARD_CUSTOM_NAME="weact-stm32h743custom"
CONFIG_ARCH_BOARD_CUSTOM_DIR_RELPATH=y
CONFIG_ARCH_HAVE_LEDS=y
CONFIG_ARCH_HAVE_BUTTONS=y
CONFIG_ARCH_HAVE_IRQBUTTONS=y
CONFIG_ARCH_CHIP_STM32H7=y
CONFIG_ARCH_CHIP_STM32H7_CORTEXM7=y
CONFIG_ARCH_STACKDUMP=y
CONFIG_ARMV7M_DCACHE=y
CONFIG_ARMV7M_DCACHE_WRITETHROUGH=y
CONFIG_ARMV7M_DTCM=y
CONFIG_ARMV7M_ICACHE=y
CONFIG_BOARD_LOOPSPERMSEC=43103
CONFIG_BUILTIN=y
CONFIG_DEBUG_SYMBOLS=y
CONFIG_EXPERIMENTAL=y
CONFIG_HAVE_CXX=y
CONFIG_HAVE_CXXINITIALIZE=y
CONFIG_INIT_ENTRYPOINT="nsh_main"
CONFIG_INTELHEX_BINARY=y
CONFIG_LINE_MAX=64
CONFIG_MM_REGIONS=4
CONFIG_NSH_BUILTIN_APPS=y
CONFIG_NSH_FILEIOSIZE=512
CONFIG_NSH_READLINE=y
CONFIG_PREALLOC_TIMERS=4
CONFIG_RAM_SIZE=245760
CONFIG_RAM_START=0x20010000
CONFIG_RAW_BINARY=y
CONFIG_RR_INTERVAL=200
CONFIG_SCHED_WAITPID=y
CONTENT OF OUTPUT FILE END
Appended CONFIG_SPI=y to /workspaces/rtos_labs/nuttxspace/nuttx/tools/../.config
CONTENT OF OUTPUT FILE BEGIN

#
# This file is autogenerated: And created with custom comments..
#
# You can use "make menuconfig" to make any modifications to the installed .config file.
# You can then do "make savedefconfig" to generate a new defconfig file that includes your
# modifications.
#
# CONFIG_NSH_DISABLE_IFCONFIG is not set
# CONFIG_NSH_DISABLE_PS is not set
# CONFIG_STANDARD_SERIAL is not set
# CONFIG_STM32H7_USE_LEGACY_PINMAP is not set
CONFIG_ARCH="arm"
CONFIG_ARCH_BOARD_CUSTOM=y
CONFIG_ARCH_BOARD_CUSTOM_DIR="../../we-act-board-bringup/boards/arm/stm32h7/weact-stm32h743custom"
CONFIG_ARCH_BOARD_CUSTOM_NAME="weact-stm32h743custom"
CONFIG_ARCH_BOARD_CUSTOM_DIR_RELPATH=y
CONFIG_ARCH_HAVE_LEDS=y
CONFIG_ARCH_HAVE_BUTTONS=y
CONFIG_ARCH_HAVE_IRQBUTTONS=y
CONFIG_ARCH_CHIP_STM32H7=y
CONFIG_ARCH_CHIP_STM32H7_CORTEXM7=y
CONFIG_ARCH_STACKDUMP=y
CONFIG_ARMV7M_DCACHE=y
CONFIG_ARMV7M_DCACHE_WRITETHROUGH=y
CONFIG_ARMV7M_DTCM=y
CONFIG_ARMV7M_ICACHE=y
CONFIG_BOARD_LOOPSPERMSEC=43103
CONFIG_BUILTIN=y
CONFIG_DEBUG_SYMBOLS=y
CONFIG_EXPERIMENTAL=y
CONFIG_HAVE_CXX=y
CONFIG_HAVE_CXXINITIALIZE=y
CONFIG_INIT_ENTRYPOINT="nsh_main"
CONFIG_INTELHEX_BINARY=y
CONFIG_LINE_MAX=64
CONFIG_MM_REGIONS=4
CONFIG_NSH_BUILTIN_APPS=y
CONFIG_NSH_FILEIOSIZE=512
CONFIG_NSH_READLINE=y
CONFIG_PREALLOC_TIMERS=4
CONFIG_RAM_SIZE=245760
CONFIG_RAM_START=0x20010000
CONFIG_RAW_BINARY=y
CONFIG_RR_INTERVAL=200
CONFIG_SCHED_WAITPID=y
CONFIG_SPI=y
CONTENT OF OUTPUT FILE END
Appended CONFIG_START_DAY=11 to /workspaces/rtos_labs/nuttxspace/nuttx/tools/../.config
CONTENT OF OUTPUT FILE BEGIN

#
# This file is autogenerated: And created with custom comments..
#
# You can use "make menuconfig" to make any modifications to the installed .config file.
# You can then do "make savedefconfig" to generate a new defconfig file that includes your
# modifications.
#
# CONFIG_NSH_DISABLE_IFCONFIG is not set
# CONFIG_NSH_DISABLE_PS is not set
# CONFIG_STANDARD_SERIAL is not set
# CONFIG_STM32H7_USE_LEGACY_PINMAP is not set
CONFIG_ARCH="arm"
CONFIG_ARCH_BOARD_CUSTOM=y
CONFIG_ARCH_BOARD_CUSTOM_DIR="../../we-act-board-bringup/boards/arm/stm32h7/weact-stm32h743custom"
CONFIG_ARCH_BOARD_CUSTOM_NAME="weact-stm32h743custom"
CONFIG_ARCH_BOARD_CUSTOM_DIR_RELPATH=y
CONFIG_ARCH_HAVE_LEDS=y
CONFIG_ARCH_HAVE_BUTTONS=y
CONFIG_ARCH_HAVE_IRQBUTTONS=y
CONFIG_ARCH_CHIP_STM32H7=y
CONFIG_ARCH_CHIP_STM32H7_CORTEXM7=y
CONFIG_ARCH_STACKDUMP=y
CONFIG_ARMV7M_DCACHE=y
CONFIG_ARMV7M_DCACHE_WRITETHROUGH=y
CONFIG_ARMV7M_DTCM=y
CONFIG_ARMV7M_ICACHE=y
CONFIG_BOARD_LOOPSPERMSEC=43103
CONFIG_BUILTIN=y
CONFIG_DEBUG_SYMBOLS=y
CONFIG_EXPERIMENTAL=y
CONFIG_HAVE_CXX=y
CONFIG_HAVE_CXXINITIALIZE=y
CONFIG_INIT_ENTRYPOINT="nsh_main"
CONFIG_INTELHEX_BINARY=y
CONFIG_LINE_MAX=64
CONFIG_MM_REGIONS=4
CONFIG_NSH_BUILTIN_APPS=y
CONFIG_NSH_FILEIOSIZE=512
CONFIG_NSH_READLINE=y
CONFIG_PREALLOC_TIMERS=4
CONFIG_RAM_SIZE=245760
CONFIG_RAM_START=0x20010000
CONFIG_RAW_BINARY=y
CONFIG_RR_INTERVAL=200
CONFIG_SCHED_WAITPID=y
CONFIG_SPI=y
CONFIG_START_DAY=11
CONTENT OF OUTPUT FILE END
Appended CONFIG_START_MONTH=5 to /workspaces/rtos_labs/nuttxspace/nuttx/tools/../.config
CONTENT OF OUTPUT FILE BEGIN

#
# This file is autogenerated: And created with custom comments..
#
# You can use "make menuconfig" to make any modifications to the installed .config file.
# You can then do "make savedefconfig" to generate a new defconfig file that includes your
# modifications.
#
# CONFIG_NSH_DISABLE_IFCONFIG is not set
# CONFIG_NSH_DISABLE_PS is not set
# CONFIG_STANDARD_SERIAL is not set
# CONFIG_STM32H7_USE_LEGACY_PINMAP is not set
CONFIG_ARCH="arm"
CONFIG_ARCH_BOARD_CUSTOM=y
CONFIG_ARCH_BOARD_CUSTOM_DIR="../../we-act-board-bringup/boards/arm/stm32h7/weact-stm32h743custom"
CONFIG_ARCH_BOARD_CUSTOM_NAME="weact-stm32h743custom"
CONFIG_ARCH_BOARD_CUSTOM_DIR_RELPATH=y
CONFIG_ARCH_HAVE_LEDS=y
CONFIG_ARCH_HAVE_BUTTONS=y
CONFIG_ARCH_HAVE_IRQBUTTONS=y
CONFIG_ARCH_CHIP_STM32H7=y
CONFIG_ARCH_CHIP_STM32H7_CORTEXM7=y
CONFIG_ARCH_STACKDUMP=y
CONFIG_ARMV7M_DCACHE=y
CONFIG_ARMV7M_DCACHE_WRITETHROUGH=y
CONFIG_ARMV7M_DTCM=y
CONFIG_ARMV7M_ICACHE=y
CONFIG_BOARD_LOOPSPERMSEC=43103
CONFIG_BUILTIN=y
CONFIG_DEBUG_SYMBOLS=y
CONFIG_EXPERIMENTAL=y
CONFIG_HAVE_CXX=y
CONFIG_HAVE_CXXINITIALIZE=y
CONFIG_INIT_ENTRYPOINT="nsh_main"
CONFIG_INTELHEX_BINARY=y
CONFIG_LINE_MAX=64
CONFIG_MM_REGIONS=4
CONFIG_NSH_BUILTIN_APPS=y
CONFIG_NSH_FILEIOSIZE=512
CONFIG_NSH_READLINE=y
CONFIG_PREALLOC_TIMERS=4
CONFIG_RAM_SIZE=245760
CONFIG_RAM_START=0x20010000
CONFIG_RAW_BINARY=y
CONFIG_RR_INTERVAL=200
CONFIG_SCHED_WAITPID=y
CONFIG_SPI=y
CONFIG_START_DAY=11
CONFIG_START_MONTH=5
CONTENT OF OUTPUT FILE END
Appended CONFIG_START_YEAR=2024 to /workspaces/rtos_labs/nuttxspace/nuttx/tools/../.config
CONTENT OF OUTPUT FILE BEGIN

#
# This file is autogenerated: And created with custom comments..
#
# You can use "make menuconfig" to make any modifications to the installed .config file.
# You can then do "make savedefconfig" to generate a new defconfig file that includes your
# modifications.
#
# CONFIG_NSH_DISABLE_IFCONFIG is not set
# CONFIG_NSH_DISABLE_PS is not set
# CONFIG_STANDARD_SERIAL is not set
# CONFIG_STM32H7_USE_LEGACY_PINMAP is not set
CONFIG_ARCH="arm"
CONFIG_ARCH_BOARD_CUSTOM=y
CONFIG_ARCH_BOARD_CUSTOM_DIR="../../we-act-board-bringup/boards/arm/stm32h7/weact-stm32h743custom"
CONFIG_ARCH_BOARD_CUSTOM_NAME="weact-stm32h743custom"
CONFIG_ARCH_BOARD_CUSTOM_DIR_RELPATH=y
CONFIG_ARCH_HAVE_LEDS=y
CONFIG_ARCH_HAVE_BUTTONS=y
CONFIG_ARCH_HAVE_IRQBUTTONS=y
CONFIG_ARCH_CHIP_STM32H7=y
CONFIG_ARCH_CHIP_STM32H7_CORTEXM7=y
CONFIG_ARCH_STACKDUMP=y
CONFIG_ARMV7M_DCACHE=y
CONFIG_ARMV7M_DCACHE_WRITETHROUGH=y
CONFIG_ARMV7M_DTCM=y
CONFIG_ARMV7M_ICACHE=y
CONFIG_BOARD_LOOPSPERMSEC=43103
CONFIG_BUILTIN=y
CONFIG_DEBUG_SYMBOLS=y
CONFIG_EXPERIMENTAL=y
CONFIG_HAVE_CXX=y
CONFIG_HAVE_CXXINITIALIZE=y
CONFIG_INIT_ENTRYPOINT="nsh_main"
CONFIG_INTELHEX_BINARY=y
CONFIG_LINE_MAX=64
CONFIG_MM_REGIONS=4
CONFIG_NSH_BUILTIN_APPS=y
CONFIG_NSH_FILEIOSIZE=512
CONFIG_NSH_READLINE=y
CONFIG_PREALLOC_TIMERS=4
CONFIG_RAM_SIZE=245760
CONFIG_RAM_START=0x20010000
CONFIG_RAW_BINARY=y
CONFIG_RR_INTERVAL=200
CONFIG_SCHED_WAITPID=y
CONFIG_SPI=y
CONFIG_START_DAY=11
CONFIG_START_MONTH=5
CONFIG_START_YEAR=2024
CONTENT OF OUTPUT FILE END
Appended CONFIG_STM32H7_USART1=y to /workspaces/rtos_labs/nuttxspace/nuttx/tools/../.config
CONTENT OF OUTPUT FILE BEGIN

#
# This file is autogenerated: And created with custom comments..
#
# You can use "make menuconfig" to make any modifications to the installed .config file.
# You can then do "make savedefconfig" to generate a new defconfig file that includes your
# modifications.
#
# CONFIG_NSH_DISABLE_IFCONFIG is not set
# CONFIG_NSH_DISABLE_PS is not set
# CONFIG_STANDARD_SERIAL is not set
# CONFIG_STM32H7_USE_LEGACY_PINMAP is not set
CONFIG_ARCH="arm"
CONFIG_ARCH_BOARD_CUSTOM=y
CONFIG_ARCH_BOARD_CUSTOM_DIR="../../we-act-board-bringup/boards/arm/stm32h7/weact-stm32h743custom"
CONFIG_ARCH_BOARD_CUSTOM_NAME="weact-stm32h743custom"
CONFIG_ARCH_BOARD_CUSTOM_DIR_RELPATH=y
CONFIG_ARCH_HAVE_LEDS=y
CONFIG_ARCH_HAVE_BUTTONS=y
CONFIG_ARCH_HAVE_IRQBUTTONS=y
CONFIG_ARCH_CHIP_STM32H7=y
CONFIG_ARCH_CHIP_STM32H7_CORTEXM7=y
CONFIG_ARCH_STACKDUMP=y
CONFIG_ARMV7M_DCACHE=y
CONFIG_ARMV7M_DCACHE_WRITETHROUGH=y
CONFIG_ARMV7M_DTCM=y
CONFIG_ARMV7M_ICACHE=y
CONFIG_BOARD_LOOPSPERMSEC=43103
CONFIG_BUILTIN=y
CONFIG_DEBUG_SYMBOLS=y
CONFIG_EXPERIMENTAL=y
CONFIG_HAVE_CXX=y
CONFIG_HAVE_CXXINITIALIZE=y
CONFIG_INIT_ENTRYPOINT="nsh_main"
CONFIG_INTELHEX_BINARY=y
CONFIG_LINE_MAX=64
CONFIG_MM_REGIONS=4
CONFIG_NSH_BUILTIN_APPS=y
CONFIG_NSH_FILEIOSIZE=512
CONFIG_NSH_READLINE=y
CONFIG_PREALLOC_TIMERS=4
CONFIG_RAM_SIZE=245760
CONFIG_RAM_START=0x20010000
CONFIG_RAW_BINARY=y
CONFIG_RR_INTERVAL=200
CONFIG_SCHED_WAITPID=y
CONFIG_SPI=y
CONFIG_START_DAY=11
CONFIG_START_MONTH=5
CONFIG_START_YEAR=2024
CONFIG_STM32H7_USART1=y
CONTENT OF OUTPUT FILE END
Appended CONFIG_SYSTEM_NSH=y to /workspaces/rtos_labs/nuttxspace/nuttx/tools/../.config
CONTENT OF OUTPUT FILE BEGIN

#
# This file is autogenerated: And created with custom comments..
#
# You can use "make menuconfig" to make any modifications to the installed .config file.
# You can then do "make savedefconfig" to generate a new defconfig file that includes your
# modifications.
#
# CONFIG_NSH_DISABLE_IFCONFIG is not set
# CONFIG_NSH_DISABLE_PS is not set
# CONFIG_STANDARD_SERIAL is not set
# CONFIG_STM32H7_USE_LEGACY_PINMAP is not set
CONFIG_ARCH="arm"
CONFIG_ARCH_BOARD_CUSTOM=y
CONFIG_ARCH_BOARD_CUSTOM_DIR="../../we-act-board-bringup/boards/arm/stm32h7/weact-stm32h743custom"
CONFIG_ARCH_BOARD_CUSTOM_NAME="weact-stm32h743custom"
CONFIG_ARCH_BOARD_CUSTOM_DIR_RELPATH=y
CONFIG_ARCH_HAVE_LEDS=y
CONFIG_ARCH_HAVE_BUTTONS=y
CONFIG_ARCH_HAVE_IRQBUTTONS=y
CONFIG_ARCH_CHIP_STM32H7=y
CONFIG_ARCH_CHIP_STM32H7_CORTEXM7=y
CONFIG_ARCH_STACKDUMP=y
CONFIG_ARMV7M_DCACHE=y
CONFIG_ARMV7M_DCACHE_WRITETHROUGH=y
CONFIG_ARMV7M_DTCM=y
CONFIG_ARMV7M_ICACHE=y
CONFIG_BOARD_LOOPSPERMSEC=43103
CONFIG_BUILTIN=y
CONFIG_DEBUG_SYMBOLS=y
CONFIG_EXPERIMENTAL=y
CONFIG_HAVE_CXX=y
CONFIG_HAVE_CXXINITIALIZE=y
CONFIG_INIT_ENTRYPOINT="nsh_main"
CONFIG_INTELHEX_BINARY=y
CONFIG_LINE_MAX=64
CONFIG_MM_REGIONS=4
CONFIG_NSH_BUILTIN_APPS=y
CONFIG_NSH_FILEIOSIZE=512
CONFIG_NSH_READLINE=y
CONFIG_PREALLOC_TIMERS=4
CONFIG_RAM_SIZE=245760
CONFIG_RAM_START=0x20010000
CONFIG_RAW_BINARY=y
CONFIG_RR_INTERVAL=200
CONFIG_SCHED_WAITPID=y
CONFIG_SPI=y
CONFIG_START_DAY=11
CONFIG_START_MONTH=5
CONFIG_START_YEAR=2024
CONFIG_STM32H7_USART1=y
CONFIG_SYSTEM_NSH=y
CONTENT OF OUTPUT FILE END
Appended CONFIG_TASK_NAME_SIZE=0 to /workspaces/rtos_labs/nuttxspace/nuttx/tools/../.config
CONTENT OF OUTPUT FILE BEGIN

#
# This file is autogenerated: And created with custom comments..
#
# You can use "make menuconfig" to make any modifications to the installed .config file.
# You can then do "make savedefconfig" to generate a new defconfig file that includes your
# modifications.
#
# CONFIG_NSH_DISABLE_IFCONFIG is not set
# CONFIG_NSH_DISABLE_PS is not set
# CONFIG_STANDARD_SERIAL is not set
# CONFIG_STM32H7_USE_LEGACY_PINMAP is not set
CONFIG_ARCH="arm"
CONFIG_ARCH_BOARD_CUSTOM=y
CONFIG_ARCH_BOARD_CUSTOM_DIR="../../we-act-board-bringup/boards/arm/stm32h7/weact-stm32h743custom"
CONFIG_ARCH_BOARD_CUSTOM_NAME="weact-stm32h743custom"
CONFIG_ARCH_BOARD_CUSTOM_DIR_RELPATH=y
CONFIG_ARCH_HAVE_LEDS=y
CONFIG_ARCH_HAVE_BUTTONS=y
CONFIG_ARCH_HAVE_IRQBUTTONS=y
CONFIG_ARCH_CHIP_STM32H7=y
CONFIG_ARCH_CHIP_STM32H7_CORTEXM7=y
CONFIG_ARCH_STACKDUMP=y
CONFIG_ARMV7M_DCACHE=y
CONFIG_ARMV7M_DCACHE_WRITETHROUGH=y
CONFIG_ARMV7M_DTCM=y
CONFIG_ARMV7M_ICACHE=y
CONFIG_BOARD_LOOPSPERMSEC=43103
CONFIG_BUILTIN=y
CONFIG_DEBUG_SYMBOLS=y
CONFIG_EXPERIMENTAL=y
CONFIG_HAVE_CXX=y
CONFIG_HAVE_CXXINITIALIZE=y
CONFIG_INIT_ENTRYPOINT="nsh_main"
CONFIG_INTELHEX_BINARY=y
CONFIG_LINE_MAX=64
CONFIG_MM_REGIONS=4
CONFIG_NSH_BUILTIN_APPS=y
CONFIG_NSH_FILEIOSIZE=512
CONFIG_NSH_READLINE=y
CONFIG_PREALLOC_TIMERS=4
CONFIG_RAM_SIZE=245760
CONFIG_RAM_START=0x20010000
CONFIG_RAW_BINARY=y
CONFIG_RR_INTERVAL=200
CONFIG_SCHED_WAITPID=y
CONFIG_SPI=y
CONFIG_START_DAY=11
CONFIG_START_MONTH=5
CONFIG_START_YEAR=2024
CONFIG_STM32H7_USART1=y
CONFIG_SYSTEM_NSH=y
CONFIG_TASK_NAME_SIZE=0
CONTENT OF OUTPUT FILE END
Appended CONFIG_USART1_SERIAL_CONSOLE=y to /workspaces/rtos_labs/nuttxspace/nuttx/tools/../.config
CONTENT OF OUTPUT FILE BEGIN

#
# This file is autogenerated: And created with custom comments..
#
# You can use "make menuconfig" to make any modifications to the installed .config file.
# You can then do "make savedefconfig" to generate a new defconfig file that includes your
# modifications.
#
# CONFIG_NSH_DISABLE_IFCONFIG is not set
# CONFIG_NSH_DISABLE_PS is not set
# CONFIG_STANDARD_SERIAL is not set
# CONFIG_STM32H7_USE_LEGACY_PINMAP is not set
CONFIG_ARCH="arm"
CONFIG_ARCH_BOARD_CUSTOM=y
CONFIG_ARCH_BOARD_CUSTOM_DIR="../../we-act-board-bringup/boards/arm/stm32h7/weact-stm32h743custom"
CONFIG_ARCH_BOARD_CUSTOM_NAME="weact-stm32h743custom"
CONFIG_ARCH_BOARD_CUSTOM_DIR_RELPATH=y
CONFIG_ARCH_HAVE_LEDS=y
CONFIG_ARCH_HAVE_BUTTONS=y
CONFIG_ARCH_HAVE_IRQBUTTONS=y
CONFIG_ARCH_CHIP_STM32H7=y
CONFIG_ARCH_CHIP_STM32H7_CORTEXM7=y
CONFIG_ARCH_STACKDUMP=y
CONFIG_ARMV7M_DCACHE=y
CONFIG_ARMV7M_DCACHE_WRITETHROUGH=y
CONFIG_ARMV7M_DTCM=y
CONFIG_ARMV7M_ICACHE=y
CONFIG_BOARD_LOOPSPERMSEC=43103
CONFIG_BUILTIN=y
CONFIG_DEBUG_SYMBOLS=y
CONFIG_EXPERIMENTAL=y
CONFIG_HAVE_CXX=y
CONFIG_HAVE_CXXINITIALIZE=y
CONFIG_INIT_ENTRYPOINT="nsh_main"
CONFIG_INTELHEX_BINARY=y
CONFIG_LINE_MAX=64
CONFIG_MM_REGIONS=4
CONFIG_NSH_BUILTIN_APPS=y
CONFIG_NSH_FILEIOSIZE=512
CONFIG_NSH_READLINE=y
CONFIG_PREALLOC_TIMERS=4
CONFIG_RAM_SIZE=245760
CONFIG_RAM_START=0x20010000
CONFIG_RAW_BINARY=y
CONFIG_RR_INTERVAL=200
CONFIG_SCHED_WAITPID=y
CONFIG_SPI=y
CONFIG_START_DAY=11
CONFIG_START_MONTH=5
CONFIG_START_YEAR=2024
CONFIG_STM32H7_USART1=y
CONFIG_SYSTEM_NSH=y
CONFIG_TASK_NAME_SIZE=0
CONFIG_USART1_SERIAL_CONSOLE=y
CONTENT OF OUTPUT FILE END