TP Link 843ND Setup After Resetting

TP Link 843ND Setup After Resetting :

First Disconnect Every Cable From The Router
And Then Connect Only One Cable From Yellow Port To Your Laptop
Login Using IP Address : 192.168.0.1

Go To Working Mode : Check To "Control the system mode by software"
Then Select "WISP Client Router" And Click On Save Button.

Then Go To Network > LAN : Change IP Address From 192.168.0.1 To 192.168.3.1
And Then Click On Save Button

Then Go To Wireless > Wireless Settings : Click On Survey Button (Wait For Some Seconds)
And Search For BSSID 00-27-22-2E-BE-BC And Click On Connect Button Straight To That.

Then Enter Password As (Just Below Auth type:) : speedforce007
Then Enter Wirless Network Name : Barcelona
Then Click On Save Button.

Then Go To Network > WAN :
Select PPPoE/Russia PPPoE
And Enter Username : hamad
And Password : 007
Then Click On Save Button.