Guest User

Untitled

a guest
Jul 9th, 2011
108
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. --------- beginning of /dev/log/main
  2.  
  3. I/DEBUG ( 1527): debuggerd: Jul 7 2011 07:02:50
  4.  
  5. I/DBVC ( 1534): atvc_pal_production_part: start
  6.  
  7. I/DBVC ( 1534): atvc_pal_init_factory_state: start
  8.  
  9. I/DBVC ( 1534): atvc_pal_init_factory_state: determined out of factory state
  10.  
  11. I/DBVC ( 1534): atval_pal_read_datablock: enter
  12.  
  13. I/DBVC ( 1534): atval_pal_read_datablock: getting size of datablock
  14.  
  15. I/DBVC ( 1534): atval_pal_read_datablock: exit
  16.  
  17. I/DBVC ( 1534): atval_enforce_android_policy: validation failed. all disabled.
  18.  
  19. I/DBVC ( 1534): read handset resource access flags:
  20.  
  21. I/DBVC ( 1534): 0x00000000
  22.  
  23. I/DBVC ( 1534): atval_setup_properties: valid datablock - setting flags
  24.  
  25. I/usbd ( 1535): main(): Start usbd - version 1.2
  26.  
  27. I/usbd ( 1535): main(): Initializing uevent_socket
  28.  
  29. I/usbd ( 1535): main(): Initializing usb_device_mode
  30.  
  31. I/usbd ( 1535): main(): Phone was started up in normal mode
  32.  
  33. I/usbd ( 1535): main(): Initializing usbd socket
  34.  
  35. I/usbd ( 1535): usbd_get_cable_status(): cable_type = usb
  36.  
  37. I/usbd ( 1535):
  38.  
  39. I/usbd ( 1535): usbd_get_cable_status(): current usb_online = 1
  40.  
  41. I/usbd ( 1535): main(): Initial Cable State = Cable Attached
  42.  
  43. I/usbd ( 1535): main(): get event from usb_device_fd
  44.  
  45. I/usbd ( 1535): main(): devbuf: none:none:enumerated
  46.  
  47. I/usbd ( 1535): rc: 20 usbd_curr_cable_status: 0
  48.  
  49. I/usbd ( 1535): main(): pcSwitchbuf = none
  50.  
  51. I/usbd ( 1535): main(): adbEnablebuf: none
  52.  
  53. I/usbd ( 1535): main(): length = 11
  54.  
  55. I/usbd ( 1535): main(): enubuf: enumerated
  56.  
  57. I/usbd ( 1535): main(): recieved enumerated
  58.  
  59. I/usbd ( 1535): main(): usbd_app_fd = -1
  60.  
  61. I/usbd ( 1535): main(): get event from usb_device_fd
  62.  
  63. I/usbd ( 1535): main(): devbuf: none:none:get_desc
  64.  
  65. I/usbd ( 1535): rc: 18 usbd_curr_cable_status: 0
  66.  
  67. I/usbd ( 1535): main(): pcSwitchbuf = none
  68.  
  69. I/usbd ( 1535): main(): adbEnablebuf: none
  70.  
  71. I/usbd ( 1535): main(): length = 9
  72.  
  73. I/usbd ( 1535): main(): enubuf: get_desc
  74.  
  75. I/usbd ( 1535): main(): received get_descriptor, enum in progress
  76.  
  77. I/ftmipcd ( 1542): USBLAN interface not available
  78.  
  79. I/DBVC ( 1534): atval_enforce_android_policy: finalize the properties
  80.  
  81. I/DBVC ( 1534): atval_finalize_properties: START
  82.  
  83. I/DBVC ( 1534): atval_finalize_properties: parse property file
  84.  
  85. I/DBVC ( 1534): atval_finalize_properties: rename
  86.  
  87. I/BATTD ( 1536): Battd USB INSERT = Success
  88.  
  89. I/BATTD ( 1536): Battd Init = Success
  90.  
  91. I/BATTD ( 1536): RTC Log SBCM Init=1310270020032
  92.  
  93. I/BATTD ( 1536): SBCM_GLUE: UNABLE TO OPEN FILE /config/public/battd/batt_offset_data
  94.  
  95. I/BATTD ( 1536): SBCM_GLUE: BATT DATA READ - SUCCESS
  96.  
  97. I/BATTD ( 1536): SBCM_GLUE: BATT DATA READ - SUCCESS
  98.  
  99. I/BATTD ( 1536): SBCM_GLUE: BATT DATA READ - SUCCESS
  100.  
  101. I/BATTD ( 1536): SBCM_GLUE: BATT DATA RETRIVAL SUCCESS
  102.  
  103. I/BATTD ( 1536): SBCM_GLUE: CutOff Threshold is 3050 mV
  104.  
  105. I/BATTD ( 1536): SBCM_GLUE_EVENT_INIT=Initialization
  106.  
  107. I/BATTD ( 1536): SBCM_GLUE ****Battery Phasing start ****
  108.  
  109. I/BATTD ( 1536): SBCM_GLUE offset_batti = -1
  110.  
  111. I/BATTD ( 1536): SBCM_GLUE slope_batti = 128
  112.  
  113. I/BATTD ( 1536): SBCM_GLUE offset_chrgi = 0
  114.  
  115. I/BATTD ( 1536): SBCM_GLUE slope_chrgi = 125
  116.  
  117. I/BATTD ( 1536): SBCM_GLUE offset_battp = 13
  118.  
  119. I/BATTD ( 1536): SBCM_GLUE slope_battp = 128
  120.  
  121. I/BATTD ( 1536): SBCM_GLUE offset_bp = 0
  122.  
  123. I/BATTD ( 1536): SBCM_GLUE slope_bp = 128
  124.  
  125. I/BATTD ( 1536): SBCM_GLUE offset_battt = 3
  126.  
  127. I/BATTD ( 1536): SBCM_GLUE slope_battt = 128
  128.  
  129. I/BATTD ( 1536): SBCM_GLUE offset_chrgv = 5
  130.  
  131. I/BATTD ( 1536): SBCM_GLUE slope_chrgv = 127
  132.  
  133. I/BATTD ( 1536): SBCM_GLUE ****Battery Phasing end ****
  134.  
  135. I/BATTD ( 1536): SBCM_GLUE temp safe = 323
  136.  
  137. I/BATTD ( 1536): SBCM_GLUE temp warn = 328
  138.  
  139. I/BATTD ( 1536): SBCM_GLUE temp cool = 331
  140.  
  141. I/BATTD ( 1536): SBCM_GLUE temp phased safe raw = 0x69
  142.  
  143. I/BATTD ( 1536): SBCM_GLUE temp phased warn raw = 0x59
  144.  
  145. I/BATTD ( 1536): SBCM_GLUE temp phased cool raw = 0x51
  146.  
  147. I/BATTD ( 1536): SBCM_GLUE temp safe unphased raw = 0x66
  148.  
  149. I/BATTD ( 1536): SBCM_GLUE temp warn unphased raw = 0x56
  150.  
  151. I/BATTD ( 1536): SBCM_GLUE temp cool unphased raw = 0x4e
  152.  
  153. I/BATTD ( 1536): Coulomb Counter Enabled=1
  154.  
  155. I/BATTD ( 1536): SBCM_ALGORITHM_task_handler()return=686979
  156.  
  157. I/BATTD ( 1536): while(SBCM_GLUE_atod_pending)=2
  158.  
  159. I/BATTD ( 1536): SBCM_ALGORITHM_task_handler()return=0xA7BBD
  160.  
  161. I/BATTD ( 1536): while(SBCM_GLUE_atod_pending)=4
  162.  
  163. I/BATTD ( 1536): File /data/battd/cc_data does not exist.
  164.  
  165. I/BATTD ( 1536): File /data/battd/cc_data_old does not exist.
  166.  
  167. I/BATTD ( 1536): Percentage from status file = -4711851510537912312
  168.  
  169. I/BATTD ( 1536): Voltage from status file = 47125
  170.  
  171. I/BATTD ( 1536): SBCM_ALGORITHM_task_handler()return=0xA7B81
  172.  
  173. I/BATTD ( 1536): Timeout=10
  174.  
  175. I/usbd ( 1535): main(): get event from usb_device_fd
  176.  
  177. I/usbd ( 1535): main(): devbuf: none:adb_enable:none
  178.  
  179. I/usbd ( 1535): rc: 20 usbd_curr_cable_status: 0
  180.  
  181. I/usbd ( 1535): main(): pcSwitchbuf = none
  182.  
  183. I/usbd ( 1535): main(): adbEnablebuf: adb_enable
  184.  
  185. I/usbd ( 1535): main(): length = 5
  186.  
  187. I/usbd ( 1535): main(): enubuf: none
  188.  
  189. I/cm ( 1568): Welcome to Android 2.3.4 / CyanogenMod-7-07072011-NIGHTLY-DROIDX
  190.  
  191. I/cm ( 1573): _
  192.  
  193. --------- beginning of /dev/log/system
  194.  
  195. I/Vold ( 1525): Vold 2.1 (the revenge) firing up
  196.  
  197. I/mdm_panicd( 1543): Subscribed to RDS_MSG_ID_UNSOL_IPC_FAILURE
  198.  
  199. I/mdm_panicd( 1543): RDS Socket established gUnsolicitedFd = 4
  200.  
  201. I/BATTD ( 1536): SBCM_GLUE ****Battery BRT Read ****
  202.  
  203. D/Vold ( 1525): Volume sdcard state changing -1 (Initializing) -> 0 (No-Media)
  204.  
  205. I/cm ( 1579): __ __ _ ___ _ _ __ ___ __ _ _ _ _ __ __))
  206.  
  207. I/Netd ( 1526): Netd 1.0 starting
  208.  
  209. I/cm ( 1593): ((_ \(/'((_( ((\( ((_)((_( (('((\( ((`1( ((_)((_(
  210.  
  211. I/cm ( 1603): )) _))
  212.  
  213. D/Vold ( 1525): Volume sdcard state changing 0 (No-Media) -> 2 (Pending)
  214.  
  215. D/Vold ( 1525): Volume sdcard state changing 2 (Pending) -> 1 (Idle-Unmounted)
  216.  
  217. I/cm ( 1611):
  218.  
  219. I/Netd ( 1672): Netd 1.0 starting
  220.  
  221. I/logwrapper( 1522): /system/xbin/run-parts terminated by exit(0)
  222.  
  223. I/BATTD ( 1536): SBCM_GLUE ****BRT SUCCESS****
  224.  
  225. I/BATTD ( 1536): BM_BATT_DATA: status valid
  226.  
  227. I/BATTD ( 1536): BM_BATT_DATA: uid valid
  228.  
  229. I/BATTD ( 1536): BM_BATT_DATA: family_code = 137
  230.  
  231. I/BATTD ( 1536): BM_BATT_DATA: uid_lsb = 0
  232.  
  233. I/BATTD ( 1536): BM_BATT_DATA: uid_msb = 80
  234.  
  235. I/BATTD ( 1536): BM_BATT_DATA: page_2_checksum = 0
  236.  
  237. I/BATTD ( 1536): BM_BATT_DATA: page_3_checksum = 0
  238.  
  239. I/BATTD ( 1536): BM_BATT_DATA: cpyrght_vld = 1
  240.  
  241. I/BATTD ( 1536): SBCM CORE convert_rom_data: bcap= 1500, raw= 0x96
  242.  
  243. I/BATTD ( 1536): BATTD_SetBattCapacity BATT CAP = 196618
  244.  
  245. I/BATTD ( 1536): SBCM_GLUE BATT CAP = 1500
  246.  
  247. I/BATTD ( 1536): Event from SBCM Driver=Coulomb Counter Calibration Interrupt
  248.  
  249. I/BATTD ( 1536): set_charge_voltage=4200
  250.  
  251. I/BATTD ( 1536): set_charge_current=500
  252.  
  253. I/Netd ( 1682): Netd 1.0 starting
  254.  
  255. I/Netd ( 1688): Netd 1.0 starting
  256.  
  257. I/Netd ( 1694): Netd 1.0 starting
  258.  
  259. I/Netd ( 1700): Netd 1.0 starting
  260.  
  261. I/Netd ( 1707): Netd 1.0 starting
RAW Paste Data