Advertisement
embed3d

bpi-m2_fixed_mainline

Feb 11th, 2018
489
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 17.72 KB | None | 0 0
  1. U-Boot 2018.01-dirty (Feb 09 2018 - 11:54:32 +0100) Allwinner Technology
  2.  
  3. CPU: Allwinner A31s (SUN6I)
  4. Model: Sinovoip BPI-M2
  5. DRAM: 1 GiB
  6. MMC: SUNXI SD/MMC: 0
  7. *** Warning - bad CRC, using default environment
  8.  
  9. In: serial
  10. Out: serial
  11. Err: serial
  12. Net: eth0: ethernet@01c30000
  13. starting USB...
  14. USB0: USB EHCI 1.00
  15. USB1: USB OHCI 1.0
  16. scanning bus 0 for devices... 2 USB Device(s) found
  17. scanning usb for storage devices... 0 Storage Device(s) found
  18. Hit any key to stop autoboot: 0
  19. switch to partitions #0, OK
  20. mmc0 is current device
  21. Scanning mmc 0:1...
  22. Found U-Boot script /boot.scr
  23. reading /boot.scr
  24. 339 bytes read in 21 ms (15.6 KiB/s)
  25. ## Executing script at 43100000
  26. reading sun6i-a31s-sinovoip-bpi-m2.dtb
  27. 25697 bytes read in 38 ms (660.2 KiB/s)
  28. reading uImage
  29. 3920720 bytes read in 251 ms (14.9 MiB/s)
  30. ## Booting kernel from Legacy Image at 42000000 ...
  31. Image Name: Linux-4.15.0-12647-gaf8c64a81f18
  32. Image Type: ARM Linux Kernel Image (uncompressed)
  33. Data Size: 3920656 Bytes = 3.7 MiB
  34. Load Address: 40008000
  35. Entry Point: 40008000
  36. Verifying Checksum ... OK
  37. ## Flattened Device Tree blob at 43000000
  38. Booting using the fdt blob at 0x43000000
  39. Loading Kernel Image ... OK
  40. Loading Device Tree to 49ff6000, end 49fff460 ... OK
  41.  
  42. Starting kernel ...
  43.  
  44. [ 0.000000] Booting Linux on physical CPU 0x0
  45. [ 0.000000] Linux version 4.15.0-12647-gaf8c64a81f18 (philipp@debian-laptop) (gcc version 6.3.0 20170516 (Debian 6.3.0-18)) #1 SMP Sun Feb 11 19:24:46 CET 2018
  46. [ 0.000000] CPU: ARMv7 Processor [410fc073] revision 3 (ARMv7), cr=10c5387d
  47. [ 0.000000] CPU: div instructions available: patching division code
  48. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  49. [ 0.000000] OF: fdt: Machine model: Sinovoip BPI-M2
  50. [ 0.000000] Memory policy: Data cache writealloc
  51. [ 0.000000] cma: Reserved 16 MiB at 0x7f000000
  52. [ 0.000000] psci: probing for conduit method from DT.
  53. [ 0.000000] psci: Using PSCI v0.1 Function IDs from DT
  54. [ 0.000000] random: get_random_bytes called from start_kernel+0xa0/0x3f4 with crng_init=0
  55. [ 0.000000] percpu: Embedded 16 pages/cpu @(ptrval) s33740 r8192 d23604 u65536
  56. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 260608
  57. [ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p2 rw rootwait panic=10
  58. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  59. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  60. [ 0.000000] Memory: 1012944K/1048576K available (6144K kernel code, 421K rwdata, 1476K rodata, 1024K init, 249K bss, 19248K reserved, 16384K cma-reserved, 245760K hi)
  61. [ 0.000000] Virtual kernel memory layout:
  62. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  63. [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
  64. [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB)
  65. [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB)
  66. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  67. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  68. [ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (7136 kB)
  69. [ 0.000000] .init : 0x(ptrval) - 0x(ptrval) (1024 kB)
  70. [ 0.000000] .data : 0x(ptrval) - 0x(ptrval) ( 422 kB)
  71. [ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) ( 250 kB)
  72. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  73. [ 0.000000] Hierarchical RCU implementation.
  74. [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
  75. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
  76. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
  77. [ 0.000000] GIC: Using split EOI/Deactivate mode
  78. [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
  79. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
  80. [ 0.000006] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
  81. [ 0.000017] Switching to timer-based delay loop, resolution 41ns
  82. [ 0.000205] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
  83. [ 0.000332] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302233 ns
  84. [ 0.000614] Console: colour dummy device 80x30
  85. [ 0.000649] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
  86. [ 0.000662] pid_max: default: 32768 minimum: 301
  87. [ 0.000790] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
  88. [ 0.000808] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
  89. [ 0.001325] CPU: Testing write buffer coherency: ok
  90. [ 0.001614] /cpus/cpu@0 missing clock-frequency property
  91. [ 0.001629] /cpus/cpu@1 missing clock-frequency property
  92. [ 0.001642] /cpus/cpu@2 missing clock-frequency property
  93. [ 0.001654] /cpus/cpu@3 missing clock-frequency property
  94. [ 0.001666] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  95. [ 0.001956] Setting up static identity map for 0x40100000 - 0x40100060
  96. [ 0.002051] Hierarchical SRCU implementation.
  97. [ 0.002493] smp: Bringing up secondary CPUs ...
  98. [ 0.012994] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  99. [ 0.023549] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
  100. [ 0.034083] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
  101. [ 0.034153] smp: Brought up 1 node, 4 CPUs
  102. [ 0.034172] SMP: Total of 4 processors activated (192.00 BogoMIPS).
  103. [ 0.034178] CPU: All CPU(s) started in HYP mode.
  104. [ 0.034183] CPU: Virtualization extensions available.
  105. [ 0.034876] devtmpfs: initialized
  106. [ 0.040075] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 3
  107. [ 0.040246] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  108. [ 0.040264] futex hash table entries: 1024 (order: 4, 65536 bytes)
  109. [ 0.040904] pinctrl core: initialized pinctrl subsystem
  110. [ 0.041594] NET: Registered protocol family 16
  111. [ 0.042531] DMA: preallocated 256 KiB pool for atomic coherent allocations
  112. [ 0.043320] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
  113. [ 0.043329] hw-breakpoint: maximum watchpoint size is 8 bytes.
  114. [ 0.054609] SCSI subsystem initialized
  115. [ 0.054934] usbcore: registered new interface driver usbfs
  116. [ 0.054974] usbcore: registered new interface driver hub
  117. [ 0.055021] usbcore: registered new device driver usb
  118. [ 0.055178] pps_core: LinuxPPS API ver. 1 registered
  119. [ 0.055185] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  120. [ 0.055203] PTP clock support registered
  121. [ 0.055387] Advanced Linux Sound Architecture Driver Initialized.
  122. [ 0.055671] random: fast init done
  123. [ 0.055983] clocksource: Switched to clocksource arch_sys_counter
  124. [ 0.062047] NET: Registered protocol family 2
  125. [ 0.062467] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes)
  126. [ 0.062490] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
  127. [ 0.062568] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
  128. [ 0.062682] TCP: Hash tables configured (established 8192 bind 8192)
  129. [ 0.062777] UDP hash table entries: 512 (order: 2, 16384 bytes)
  130. [ 0.062826] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  131. [ 0.062994] NET: Registered protocol family 1
  132. [ 0.063381] RPC: Registered named UNIX socket transport module.
  133. [ 0.063390] RPC: Registered udp transport module.
  134. [ 0.063395] RPC: Registered tcp transport module.
  135. [ 0.063401] RPC: Registered tcp NFSv4.1 backchannel transport module.
  136. [ 0.063799] hw perfevents: no interrupt-affinity property for /pmu, guessing.
  137. [ 0.064107] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
  138. [ 0.065202] workingset: timestamp_bits=30 max_order=18 bucket_order=0
  139. [ 0.070645] NFS: Registering the id_resolver key type
  140. [ 0.070677] Key type id_resolver registered
  141. [ 0.070683] Key type id_legacy registered
  142. [ 0.071390] bounce: pool size: 64 pages
  143. [ 0.071440] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
  144. [ 0.071449] io scheduler noop registered
  145. [ 0.071456] io scheduler deadline registered
  146. [ 0.071637] io scheduler cfq registered (default)
  147. [ 0.071646] io scheduler mq-deadline registered
  148. [ 0.071653] io scheduler kyber registered
  149. [ 0.077164] sun6i-a31-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
  150. [ 0.077378] sun6i-a31-r-pinctrl 1f02c00.pinctrl: Reset controller missing
  151. [ 0.120102] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
  152. [ 0.122031] console [ttyS0] disabled
  153. [ 0.142196] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 44, base_baud = 1500000) is a U6_16550A
  154. [ 0.807615] console [ttyS0] enabled
  155. [ 0.814942] libphy: Fixed MDIO Bus: probed
  156. [ 0.819071] CAN device driver interface
  157. [ 0.823374] sun7i-dwmac 1c30000.ethernet: PTP uses main clock
  158. [ 0.829535] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  159. [ 0.836070] ehci-platform: EHCI generic platform driver
  160. [ 0.841429] ehci-platform 1c1a000.usb: EHCI Host Controller
  161. [ 0.847039] ehci-platform 1c1a000.usb: new USB bus registered, assigned bus number 1
  162. [ 0.854997] ehci-platform 1c1a000.usb: irq 33, io mem 0x01c1a000
  163. [ 0.886002] ehci-platform 1c1a000.usb: USB 2.0 started, EHCI 1.00
  164. [ 0.892713] hub 1-0:1.0: USB hub found
  165. [ 0.896504] hub 1-0:1.0: 1 port detected
  166. [ 0.900819] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  167. [ 0.907015] ohci-platform: OHCI generic platform driver
  168. [ 0.912385] ohci-platform 1c1a400.usb: Generic Platform OHCI controller
  169. [ 0.919018] ohci-platform 1c1a400.usb: new USB bus registered, assigned bus number 2
  170. [ 0.926868] ohci-platform 1c1a400.usb: irq 34, io mem 0x01c1a400
  171. [ 1.000488] hub 2-0:1.0: USB hub found
  172. [ 1.004261] hub 2-0:1.0: 1 port detected
  173. [ 1.009521] sun6i-rtc 1f00000.rtc: rtc core: registered rtc-sun6i as rtc0
  174. [ 1.016319] sun6i-rtc 1f00000.rtc: RTC enabled
  175. [ 1.020902] i2c /dev entries driver
  176. [ 1.024612] i2c-sunxi-p2wi 1f03400.i2c: could not find pctldev for node /soc@1c00000/pinctrl@1f02c00/p2wi, deferring probe
  177. [ 1.035734] IR NEC protocol handler initialized
  178. [ 1.040269] IR RC5(x/sz) protocol handler initialized
  179. [ 1.045312] IR RC6 protocol handler initialized
  180. [ 1.049846] IR JVC protocol handler initialized
  181. [ 1.054370] IR Sony protocol handler initialized
  182. [ 1.058987] IR SANYO protocol handler initialized
  183. [ 1.063682] IR Sharp protocol handler initialized
  184. [ 1.068389] IR MCE Keyboard/mouse protocol handler initialized
  185. [ 1.074212] IR XMP protocol handler initialized
  186. [ 1.078831] sunxi-ir 1f02000.ir: could not find pctldev for node /soc@1c00000/pinctrl@1f02c00/ir@0, deferring probe
  187. [ 1.089784] sunxi-wdt 1c20ca0.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
  188. [ 1.097985] pwrseq_simple mmc2_pwrseq: could not find pctldev for node /soc@1c00000/pinctrl@1f02c00/mmc2_pwrseq_pin@0, deferring probe
  189. [ 1.111393] sun4i-ss 1c15000.crypto-engine: Die ID 5
  190. [ 1.117717] usbcore: registered new interface driver usbhid
  191. [ 1.123283] usbhid: USB HID core driver
  192. [ 1.128123] NET: Registered protocol family 17
  193. [ 1.132572] can: controller area network core (rev 20170425 abi 9)
  194. [ 1.138825] NET: Registered protocol family 29
  195. [ 1.143265] can: raw protocol (rev 20170425)
  196. [ 1.147545] can: broadcast manager protocol (rev 20170425 t)
  197. [ 1.153201] can: netlink gateway (rev 20170425) max_hops=1
  198. [ 1.158872] Key type dns_resolver registered
  199. [ 1.163219] Registering SWP/SWPB emulation handler
  200. [ 1.176571] sun6i-a31-r-pinctrl 1f02c00.pinctrl: initialized sunXi PIO driver
  201. [ 1.184212] sun7i-dwmac 1c30000.ethernet: PTP uses main clock
  202. [ 1.190928] axp20x-i2c 0-0068: AXP20x variant AXP221 found
  203. [ 1.221304] input: axp20x-pek as /devices/platform/soc@1c00000/1f03400.i2c/i2c-0/0-0068/axp221-pek/input/input0
  204. [ 1.232243] dcdc1: supplied by regulator-dummy
  205. [ 1.237967] dcdc2: supplied by regulator-dummy
  206. [ 1.243097] dcdc3: supplied by regulator-dummy
  207. [ 1.248268] dcdc4: supplied by regulator-dummy
  208. [ 1.253415] dcdc5: supplied by regulator-dummy
  209. [ 1.258567] dc1sw: supplied by vdd-3v0
  210. [ 1.262997] dc5ldo: supplied by vcc-dram
  211. [ 1.266979] usb 1-1: new high-speed USB device number 2 using ehci-platform
  212. [ 1.274149] aldo1: supplied by regulator-dummy
  213. [ 1.279336] aldo2: supplied by regulator-dummy
  214. [ 1.284352] vcc-gmac: Bringing 1800000uV into 2500000-2500000uV
  215. [ 1.290998] aldo3: supplied by regulator-dummy
  216. [ 1.296719] eldo1: supplied by vdd-3v0
  217. [ 1.301045] vdd-csi: Bringing 700000uV into 1800000-1800000uV
  218. [ 1.307522] eldo2: supplied by vdd-3v0
  219. [ 1.311967] eldo3: supplied by vdd-3v0
  220. [ 1.316427] dldo1: supplied by regulator-dummy
  221. [ 1.321570] dldo2: supplied by regulator-dummy
  222. [ 1.326592] avdd-csi: Bringing 700000uV into 2800000-2800000uV
  223. [ 1.333135] dldo3: supplied by regulator-dummy
  224. [ 1.338173] vcc-pb: Bringing 700000uV into 3300000-3300000uV
  225. [ 1.345126] dldo4: supplied by regulator-dummy
  226. [ 1.350297] rtc_ldo: supplied by regulator-dummy
  227. [ 1.355074] ldo_io0: supplied by regulator-dummy
  228. [ 1.360948] ldo_io1: supplied by regulator-dummy
  229. [ 1.366670] vcc-pm-cpus: Bringing 3800000uV into 1800000-1800000uV
  230. [ 1.374689] drivevbus: supplied by regulator-dummy
  231. [ 1.382349] axp20x-i2c 0-0068: AXP20X driver loaded
  232. [ 1.387686] Registered IR keymap rc-empty
  233. [ 1.391758] rc rc0: sunxi-ir as /devices/platform/soc@1c00000/1f02000.ir/rc/rc0
  234. [ 1.399186] input: sunxi-ir as /devices/platform/soc@1c00000/1f02000.ir/rc/rc0/input1
  235. [ 1.407388] input: MCE IR Keyboard/Mouse (sunxi-ir) as /devices/virtual/input/input2
  236. [ 1.415298] sunxi-ir 1f02000.ir: initialized sunXi IR driver
  237. [ 1.422738] sunxi-mmc 1c0f000.mmc: Got CD GPIO
  238. [ 1.452502] sunxi-mmc 1c0f000.mmc: base:0x(ptrval) irq:31
  239. [ 1.458593] sunxi-mmc 1c11000.mmc: allocated mmc-pwrseq
  240. [ 1.477144] hub 1-1:1.0: USB hub found
  241. [ 1.481038] hub 1-1:1.0: 4 ports detected
  242. [ 1.488607] sunxi-mmc 1c11000.mmc: base:0x(ptrval) irq:32
  243. [ 1.494416] sun7i-dwmac 1c30000.ethernet: PTP uses main clock
  244. [ 1.500314] sun7i-dwmac 1c30000.ethernet: Ring mode enabled
  245. [ 1.505887] sun7i-dwmac 1c30000.ethernet: DMA HW capability register supported
  246. [ 1.513121] sun7i-dwmac 1c30000.ethernet: Normal descriptors
  247. [ 1.526470] mmc0: host does not support reading read-only switch, assuming write-enable
  248. [ 1.536533] mmc0: new high speed SD card at address 1234
  249. [ 1.542710] mmcblk0: mmc0:1234 SA02G 1.85 GiB
  250. [ 1.549294] mmcblk0: p1 p2
  251. [ 1.556714] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
  252. [ 1.563677] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
  253. [ 1.570654] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
  254. [ 1.578822] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
  255. [ 1.598985] mmc1: new high speed SDIO card at address 0001
  256. [ 1.609239] libphy: stmmac: probed
  257. [ 1.612647] mdio_bus stmmac-0:00: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:00, irq=POLL)
  258. [ 1.622138] mdio_bus stmmac-0:01: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:01, irq=POLL)
  259. [ 1.632125] sun6i-rtc 1f00000.rtc: setting system clock to 1970-01-01 00:00:13 UTC (13)
  260. [ 1.640471] vdd-gpu: disabling
  261. [ 1.646023] dc1sw: disabling
  262. [ 1.649489] vcc-wifi: disabling
  263. [ 1.653220] ALSA device list:
  264. [ 1.656203] No soundcards found.
  265. [ 1.661635] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities
  266. [ 1.670905] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities
  267. [ 4.241721] EXT4-fs (mmcblk0p2): recovery complete
  268. [ 4.249981] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
  269. [ 4.258109] VFS: Mounted root (ext4 filesystem) on device 179:2.
  270. [ 4.265596] devtmpfs: mounted
  271. [ 4.269647] Freeing unused kernel memory: 1024K
  272. [ 4.469542] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
  273. [ 4.483086] systemd[1]: Detected architecture 'arm'.
  274.  
  275. Welcome to Debian GNU/Linux 8 (jessie)!
  276.  
  277. [ 4.544513] systemd[1]: Failed to insert module 'autofs4'
  278. [ 4.550047] systemd[1]: Failed to insert module 'ipv6'
  279. [ 4.556937] systemd[1]: Set hostname to <bpi>.
  280. [ 4.858851] systemd[1]: Expecting device dev-ttyS0.device...
  281. Expecting device dev-ttyS0.device...
  282. [ 4.896087] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
  283. [ 4.903915] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
  284. [ 4.911556] systemd[1]: Starting Remote File Systems (Pre).
  285. [ OK ] Reached target Remote File Systems (Pre).
  286. [ 4.946055] systemd[1]: Reached target Remote File Systems (Pre).
  287. [ OK ] Reached target Paths.
  288. [ OK ] Reached target Encrypted Volumes.
  289. [ OK ] Reached target Swap.
  290. [ OK ] Created slice Root Slice.
  291. [ OK ] Created slice User and Session Slice.
  292. [ OK ] Listening on /dev/initctl Compatibility Named Pipe.
  293. [ OK ] Listening on Delayed Shutdown Socket.
  294. [ OK ] Listening on Journal Socket (/dev/log).
  295. [ OK ] Listening on udev Control Socket.
  296. [ OK ] Listening on udev Kernel Socket.
  297. [ OK ] Listening on Journal Socket.
  298. [ OK ] Created slice System Slice.
  299. [ OK ] Created slice system-getty.slice.
  300. [ OK ] Created slice system-serial\x2dgetty.slice.
  301. Starting Increase datagram queue length...
  302. Starting udev Coldplug all Devices...
  303. Mounting Debug File System...
  304. Starting Create Static Device Nodes in /dev...
  305. Starting Load Kernel Modules...
  306. [ OK ] Reached target Slices.
  307. Starting Remount Root and Kernel File Systems...
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement