Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- smartctl 7.1 2019-12-30 r5022 [x86_64-linux-4.19.107-Unraid] (local build)
- Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Model Family: SAMSUNG SpinPoint F2 EG
- Device Model: SAMSUNG HD103SI
- Serial Number: S1Y5J90SC63261
- LU WWN Device Id: 5 0024e9 201953695
- Firmware Version: 1AG01118
- User Capacity: 1,000,204,886,016 bytes [1.00 TB]
- Sector Size: 512 bytes logical/physical
- Device is: In smartctl database [for details use: -P show]
- ATA Version is: ATA/ATAPI-7, ATA8-ACS T13/1699-D revision 3b
- Local Time is: Wed Feb 10 12:25:50 2021 PST
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- AAM feature is: Disabled
- APM feature is: Disabled
- Rd look-ahead is: Enabled
- Write cache is: Enabled
- DSN feature is: Unavailable
- ATA Security is: Disabled, frozen [SEC2]
- Wt Cache Reorder: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x00) Offline data collection activity
- was never started.
- Auto Offline Data Collection: Disabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: (13269) seconds.
- Offline data collection
- capabilities: (0x7b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 2) minutes.
- Extended self-test routine
- recommended polling time: ( 222) minutes.
- Conveyance self-test routine
- recommended polling time: ( 24) minutes.
- SCT capabilities: (0x003f) SCT Status supported.
- SCT Error Recovery Control supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 16
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
- 1 Raw_Read_Error_Rate POSR-- 100 100 051 - 0
- 3 Spin_Up_Time POS--- 083 083 011 - 6110
- 4 Start_Stop_Count -O--CK 098 098 000 - 1717
- 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0
- 7 Seek_Error_Rate POSR-- 253 253 051 - 0
- 8 Seek_Time_Performance P-S--K 100 100 015 - 12709
- 9 Power_On_Hours -O--CK 100 100 000 - 2436
- 10 Spin_Retry_Count PO--CK 100 100 051 - 0
- 11 Calibration_Retry_Count -O--C- 100 100 000 - 0
- 12 Power_Cycle_Count -O--CK 099 099 000 - 657
- 13 Read_Soft_Error_Rate -OSR-- 100 100 000 - 0
- 183 Runtime_Bad_Block -O--CK 100 100 000 - 3
- 184 End-to-End_Error PO--CK 100 100 000 - 0
- 187 Reported_Uncorrect -O--CK 100 100 000 - 0
- 188 Command_Timeout -O--CK 100 100 000 - 0
- 190 Airflow_Temperature_Cel -O---K 076 060 000 - 24 (Min/Max 17/25)
- 194 Temperature_Celsius -O---K 078 059 000 - 22 (Min/Max 17/26)
- 195 Hardware_ECC_Recovered -O-RC- 100 100 000 - 315739566
- 196 Reallocated_Event_Count -O--CK 100 100 000 - 0
- 197 Current_Pending_Sector -O--C- 100 100 000 - 0
- 198 Offline_Uncorrectable ----CK 100 100 000 - 0
- 199 UDMA_CRC_Error_Count -OSRCK 100 100 000 - 10
- 200 Multi_Zone_Error_Rate -O-R-- 100 100 000 - 0
- 201 Soft_Read_Error_Rate -O-R-- 100 100 000 - 0
- ||||||_ K auto-keep
- |||||__ C event count
- ||||___ R error rate
- |||____ S speed/performance
- ||_____ O updated online
- |______ P prefailure warning
- General Purpose Log Directory Version 1
- SMART Log Directory Version 1 [multi-sector log support]
- Address Access R/W Size Description
- 0x00 GPL,SL R/O 1 Log Directory
- 0x01 SL R/O 1 Summary SMART error log
- 0x02 SL R/O 2 Comprehensive SMART error log
- 0x03 GPL R/O 2 Ext. Comprehensive SMART error log
- 0x04 GPL R/O 2 Device Statistics log
- 0x06 SL R/O 1 SMART self-test log
- 0x07 GPL R/O 2 Extended self-test log
- 0x09 SL R/W 1 Selective self-test log
- 0x10 GPL R/O 1 NCQ Command Error log
- 0x11 GPL R/O 1 SATA Phy Event Counters log
- 0x20 GPL R/O 2 Streaming performance log [OBS-8]
- 0x21 GPL R/O 1 Write stream error log
- 0x22 GPL R/O 1 Read stream error log
- 0x80-0x9f GPL,SL R/W 16 Host vendor specific log
- 0xe0 GPL,SL R/W 1 SCT Command/Status
- 0xe1 GPL,SL R/W 1 SCT Data Transfer
- SMART Extended Comprehensive Error Log Version: 1 (2 sectors)
- Device Error Count: 10 (device log contains only the most recent 8 errors)
- CR = Command Register
- FEATR = Features Register
- COUNT = Count (was: Sector Count) Register
- LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
- LH = LBA High (was: Cylinder High) Register ] LBA
- LM = LBA Mid (was: Cylinder Low) Register ] Register
- LL = LBA Low (was: Sector Number) Register ]
- DV = Device (was: Device/Head) Register
- DC = Device Control Register
- ER = Error register
- ST = Status register
- Powered_Up_Time is measured from power on, and printed as
- DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
- SS=sec, and sss=millisec. It "wraps" after 49.710 days.
- Error 10 [1] occurred at disk power-on lifetime: 1183 hours (49 days + 7 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 00 -- 58 00 e7 00 00 08 56 12 c1 40 00 231 sectors at LBA = 0x085612c1 = 139858625
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 35 00 03 01 00 00 00 08 56 12 a8 40 00 00:10:29.460 WRITE DMA EXT
- 35 00 03 01 00 00 00 08 56 11 a8 40 00 00:10:29.460 WRITE DMA EXT
- 35 00 03 01 00 00 00 08 56 10 a8 40 00 00:10:29.460 WRITE DMA EXT
- 35 00 03 01 00 00 00 08 56 0f a8 40 00 00:10:29.450 WRITE DMA EXT
- 35 00 03 01 00 00 00 08 56 0e a8 40 00 00:10:29.450 WRITE DMA EXT
- Error 9 [0] occurred at disk power-on lifetime: 1183 hours (49 days + 7 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 00 -- 58 00 e6 00 00 06 a3 2f b2 40 00 230 sectors at LBA = 0x06a32fb2 = 111357874
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 35 00 03 00 ff 00 00 06 a3 2f 99 40 00 00:03:03.210 WRITE DMA EXT
- 35 00 03 00 ff 00 00 06 a3 2e 99 40 00 00:03:03.210 WRITE DMA EXT
- 35 00 03 01 00 00 00 06 a3 2d 98 40 00 00:03:03.200 WRITE DMA EXT
- 35 00 03 01 00 00 00 06 a3 2c 98 40 00 00:03:03.200 WRITE DMA EXT
- 35 00 03 01 00 00 00 06 a3 2b 98 40 00 00:03:03.190 WRITE DMA EXT
- Error 8 [7] occurred at disk power-on lifetime: 1180 hours (49 days + 4 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 00 -- 58 00 49 00 00 07 65 0e 4f 40 00 73 sectors at LBA = 0x07650e4f = 124063311
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 35 00 03 01 00 00 00 07 65 0d 98 40 00 01:02:21.750 WRITE DMA EXT
- 35 00 03 01 00 00 00 07 65 0c 98 40 00 01:02:21.750 WRITE DMA EXT
- 35 00 03 01 00 00 00 07 65 0b 98 40 00 01:02:21.740 WRITE DMA EXT
- 35 00 03 01 00 00 00 07 65 0a 98 40 00 01:02:21.740 WRITE DMA EXT
- 35 00 03 01 00 00 00 07 65 09 98 40 00 01:02:21.740 WRITE DMA EXT
- Error 7 [6] occurred at disk power-on lifetime: 1179 hours (49 days + 3 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 00 -- 58 00 6b 00 00 06 4d 0a 75 40 00 107 sectors at LBA = 0x064d0a75 = 105712245
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 35 00 03 01 00 00 00 06 4d 09 e0 40 00 00:20:16.200 WRITE DMA EXT
- 35 00 03 01 00 00 00 06 4d 08 e0 40 00 00:20:16.190 WRITE DMA EXT
- 35 00 03 01 00 00 00 06 4d 07 e0 40 00 00:20:16.190 WRITE DMA EXT
- 35 00 03 01 00 00 00 06 4d 06 e0 40 00 00:20:16.190 WRITE DMA EXT
- 35 00 03 01 00 00 00 06 4d 05 e0 40 00 00:20:16.180 WRITE DMA EXT
- Error 6 [5] occurred at disk power-on lifetime: 231 hours (9 days + 15 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 00 -- d0 00 80 00 00 00 94 57 1f e0 00 128 sectors at LBA = 0x0094571f = 9721631
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 25 00 00 00 80 00 00 40 94 57 1f e0 00 00:09:28.230 READ DMA EXT
- 25 00 00 00 08 00 00 3f 30 32 37 e0 00 00:09:28.230 READ DMA EXT
- 25 00 00 00 20 00 00 3e ed 87 5f e0 00 00:09:13.940 READ DMA EXT
- 25 00 00 00 08 00 00 3f 30 32 2f e0 00 00:09:13.940 READ DMA EXT
- 25 00 00 00 20 00 00 3e be 54 ff e0 00 00:09:13.930 READ DMA EXT
- Error 5 [4] occurred at disk power-on lifetime: 171 hours (7 days + 3 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 00 -- d0 00 01 00 00 00 00 00 00 e0 00 1 sectors at LBA = 0x00000000 = 0
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 25 00 00 00 01 00 00 00 00 00 00 e0 00 00:15:01.730 READ DMA EXT
- 25 00 00 00 01 00 00 00 00 00 00 e0 00 00:15:01.730 READ DMA EXT
- 25 00 00 00 01 00 00 00 00 00 00 e0 00 00:15:01.710 READ DMA EXT
- c6 00 00 00 01 00 00 00 00 00 00 e0 00 00:14:01.810 SET MULTIPLE MODE
- 91 00 00 00 3f 00 00 00 00 00 00 ef 00 00:14:01.810 INITIALIZE DEVICE PARAMETERS [OBS-6]
- Error 4 [3] occurred at disk power-on lifetime: 147 hours (6 days + 3 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 00 -- d0 00 01 00 00 00 00 00 00 e0 00 1 sectors at LBA = 0x00000000 = 0
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 25 00 00 00 01 00 00 00 00 00 00 e0 00 00:28:29.840 READ DMA EXT
- ef 00 02 00 00 00 00 00 00 00 00 a0 00 00:28:29.840 SET FEATURES [Enable write cache]
- f5 00 00 00 00 00 00 00 00 00 00 a0 00 00:28:29.840 SECURITY FREEZE LOCK
- ef 00 66 00 00 00 00 00 00 00 00 a0 00 00:28:29.820 SET FEATURES [Disable revert defaults]
- e1 00 00 00 01 00 00 00 00 00 1f a0 00 00:28:23.850 IDLE IMMEDIATE
- Error 3 [2] occurred at disk power-on lifetime: 139 hours (5 days + 19 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 00 -- d0 00 18 00 00 00 60 00 87 e0 00 24 sectors at LBA = 0x00600087 = 6291591
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 25 00 00 00 18 00 00 00 60 00 87 e0 00 00:08:33.910 READ DMA EXT
- 25 00 00 00 18 00 00 00 60 00 bf e0 00 00:07:37.150 READ DMA EXT
- 25 00 00 00 10 00 00 00 00 01 ef e0 00 00:07:20.010 READ DMA EXT
- 25 00 00 00 08 00 00 00 60 00 57 e0 00 00:07:20.000 READ DMA EXT
- ec 00 00 00 00 00 00 00 00 00 00 a0 00 00:04:32.540 IDENTIFY DEVICE
- SMART Extended Self-test Log Version: 1 (2 sectors)
- Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
- # 1 Extended offline Completed without error 00% 2436 -
- # 2 Extended offline Completed without error 00% 2419 -
- # 3 Extended offline Aborted by host 80% 2403 -
- # 4 Extended offline Completed without error 00% 2379 -
- # 5 Extended offline Aborted by host 80% 2375 -
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
- SCT Status Version: 2
- SCT Version (vendor specific): 256 (0x0100)
- Device State: Active (0)
- Current Temperature: 23 Celsius
- Power Cycle Min/Max Temperature: --/26 Celsius
- Lifetime Min/Max Temperature: --/43 Celsius
- SCT Temperature History Version: 2
- Temperature Sampling Period: 1 minute
- Temperature Logging Interval: 1 minute
- Min/Max recommended Temperature: -4/72 Celsius
- Min/Max Temperature Limit: -9/77 Celsius
- Temperature History Size (Index): 128 (26)
- Index Estimated Time Temperature Celsius
- 27 2021-02-10 10:18 25 ******
- ... ..( 54 skipped). .. ******
- 82 2021-02-10 11:13 25 ******
- 83 2021-02-10 11:14 24 *****
- 84 2021-02-10 11:15 25 ******
- ... ..( 2 skipped). .. ******
- 87 2021-02-10 11:18 25 ******
- 88 2021-02-10 11:19 24 *****
- 89 2021-02-10 11:20 24 *****
- 90 2021-02-10 11:21 25 ******
- 91 2021-02-10 11:22 24 *****
- ... ..( 6 skipped). .. *****
- 98 2021-02-10 11:29 24 *****
- 99 2021-02-10 11:30 25 ******
- 100 2021-02-10 11:31 24 *****
- ... ..( 28 skipped). .. *****
- 1 2021-02-10 12:00 24 *****
- 2 2021-02-10 12:01 23 ****
- 3 2021-02-10 12:02 24 *****
- 4 2021-02-10 12:03 24 *****
- 5 2021-02-10 12:04 23 ****
- ... ..( 17 skipped). .. ****
- 23 2021-02-10 12:22 23 ****
- 24 2021-02-10 12:23 22 ***
- 25 2021-02-10 12:24 22 ***
- 26 2021-02-10 12:25 23 ****
- SCT Error Recovery Control:
- Read: Disabled
- Write: Disabled
- ATA_READ_LOG_EXT (addr=0x04:0x00, page=0, n=1) failed: scsi error badly formed scsi parameters
- Read Device Statistics page 0x00 failed
- Pending Defects log (GP Log 0x0c) not supported
- SATA Phy Event Counters (GP Log 0x11)
- ID Size Value Description
- 0x000a 2 2 Device-to-host register FISes sent due to a COMRESET
- 0x0001 2 0 Command failed due to ICRC error
- 0x0002 2 0 R_ERR response for data FIS
- 0x0003 2 0 R_ERR response for device-to-host data FIS
- 0x0004 2 0 R_ERR response for host-to-device data FIS
- 0x0005 2 0 R_ERR response for non-data FIS
- 0x0006 2 0 R_ERR response for device-to-host non-data FIS
- 0x0007 2 0 R_ERR response for host-to-device non-data FIS
- 0x0008 2 0 Device-to-host non-data FIS retries
- 0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy
- 0x000b 2 0 CRC errors within host-to-device FIS
- 0x000d 2 0 Non-CRC errors within host-to-device FIS
- 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
- 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
- 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
- 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement