Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- OPTIONS: I18n
- Compiled on Jun 5 2018, 10:54:41.
- Port /dev/ttyUSB0, 20:21:32
- Press CTRL-A Z for help on special keys
- [USBD] USB PRB0 LineState: 0
- [USBD] USB cable/ No Cable inserted!
- [PLFM] Keep stay in USB Mode
- Platform initialization is ok
- wait for frequency meter finish, CLK26CALI = 0x81
- mt_pll_post_init: mt_get_cpu_freq = 1040000Khz
- wait for frequency meter finish, CLK26CALI = 0x90
- mt_pll_post_init: mt_get_bus_freq = 273000Khz
- wait for frequency meter finish, CLK26CALI = 0x81
- mt_pll_post_init: mt_get_mem_freq = 133250Khz
- [PWRAP] pwrap_init_preloader
- [PWRAP] pwrap_init
- [PWRAP] _pwrap_init_sistrobe [Read Test] fail,index=0,rdata=2D52
- [PWRAP] _pwrap_init_sistrobe [Read Test] fail,index=1,rdata=2D52
- [PWRAP] _pwrap_init_sistrobe [Read Test] fail,index=2,rdata=2D52
- [PWRAP] _pwrap_init_sistrobe [Read Test] fail,index=3,rdata=2D52
- [PWRAP] _pwrap_init_sistrobe [Read Test] pass,index=4 rdata=5AA5
- [PWRAP] _pwrap_init_sistrobe [Read Test] pass,index=5 rdata=5AA5
- [PWRAP] _pwrap_init_sistrobe [Read Test] pass,index=6 rdata=5AA5
- [PWRAP] _pwrap_init_sistrobe [Read Test] pass,index=7 rdata=5AA5
- [PWRAP] _pwrap_init_sistrobe [Read Test] pass,index=8 rdata=5AA5
- [PWRAP] _pwrap_init_sistrobe [Read Test] pass,index=9 rdata=5AA5
- [PWRAP] _pwrap_init_sistrobe [Read Test] pass,index=10 rdata=5AA5
- [PWRAP] _pwrap_init_sistrobe [Read Test] pass,index=11 rdata=5AA5
- [PWRAP] _pwrap_init_sistrobe [Read Test] fail,index=12,rdata=B54B
- [PWRAP] _pwrap_init_sistrobe [Read Test] fail,index=13,rdata=B54B
- [PWRAP] _pwrap_init_sistrobe [Read Test] fail,index=14,rdata=B54B
- [PWRAP] _pwrap_init_sistrobe [Read Test] fail,index=15,rdata=B54B
- [PWRAP] _pwrap_init_sistrobe [Read Test] fail,index=16,rdata=B54B
- [PWRAP] _pwrap_init_sistrobe [Read Test] fail,index=17,rdata=B54B
- [PWRAP] _pwrap_init_sistrobe [Read Test] fail,index=18,rdata=B54B
- [PWRAP] _pwrap_init_sistrobe [Read Test] fail,index=19,rdata=B54B
- [PWRAP] _pwrap_init_sistrobe [Read Test] fail,index=20,rdata=6A97
- [PWRAP] _pwrap_init_sistrobe [Read Test] fail,index=21,rdata=6A97
- [PWRAP] _pwrap_init_sistrobe [Read Test] fail,index=22,rdata=6A97
- [PWRAP] _pwrap_init_sistrobe [Read Test] fail,index=23,rdata=6A97
- [PWRAP] _pwrap_init_reg_clock
- [PMIC_WRAP]wrap_init pass,the return value=0.
- [pmic6323_init] Preloader Start..................
- [pmic6323_init] PMIC CHIP Code = 0x2023
- INT_MISC_CON: 0 TOP_RST_MISC: 0
- pl pmic powerkey Press
- [pmic6323_init] powerKey = 1
- [pmic6323_init] is USB in = 0xB004
- [pmic6323_init] Reg[0x11A]=0x1B
- pmic setup LED
- [pmic6323_init] Done...................
- mt7623 disable long press reset ->>>>>
- mt7623 disable long press reset <<<<<-
- mt7623 VPA supplied by 1.0V to MT7530 ->
- mt7623 VPA supplied by 1.0V to MT7530 <-
- mt7623 enables RG_VGP1_EN for LCM ->
- mt7623 enables RG_VGP1_EN for LCM <-
- MT7623 E2 setting =>
- MT7623 E2 setting <=
- [PLFM] Init I2C: OK(0)
- [PLFM] Init PWRAP: OK(0)
- [PLFM] Init PMIC: OK(0)
- [PLFM] chip[CA00]
- [BLDR] [Support SD/eMMC] Build Time: 20170210-093340
- ==== Dump RGU Reg ========
- RGU MODE: 4D
- RGU LENGTH: FFE0
- RGU STA: 0
- RGU INTERVAL: FFF
- RGU SWSYSRST: 0
- ==== Dump RGU Reg End ====
- RGU: g_rgu_satus:0
- mtk_wdt_mode_config mode value=10, tmp:22000010
- PL P ON
- WDT does not trigger reboot
- RGU mtk_wdt_init:MTK_WDT_DEBUG_CTL(590200F3)
- kpd read addr: 0x0040: data:0x4001
- Enter mtk_kpd_gpio_set!
- kpd debug column : 0, 0, 0, 0, 0, 0, 0, 0
- kpd debug row : 0, 0, 0, 0, 0, 0, 0, 0
- after set KP enable: KP_SEL = 0x0 !
- MTK_PMIC_RST_KEY is used for this project!
- [RTC] get_frequency_meter: input=0x0, ouput=5
- [RTC] get_frequency_meter: input=0x0, ouput=3968
- [RTC] get_frequency_meter: input=0x0, ouput=5
- [RTC] get_frequency_meter: input=0x0, ouput=0
- [RTC] get_frequency_meter: input=0x0, ouput=0
- [RTC] bbpu = 0xC, con = 0xBFFE
- rtc_first_boot_init
- [RTC] get_frequency_meter: input=0x0, ouput=5
- [RTC] get_frequency_meter: input=0x0, ouput=3967
- [RTC] get_frequency_meter: input=0x0, ouput=5
- [RTC] get_frequency_meter: input=0x0, ouput=0
- [RTC] get_frequency_meter: input=0x0, ouput=0
- rtc_2sec_stat_clear
- rtc_2sec_reboot_check cali=768
- rtc_2sec_stat_clear
- [RTC] irqsta = 0x0, pdn1 = 0x0, pdn2 = 0x201, spar0 = 0xC0, spar1 = 0x800
- [RTC] new_spare0 = 0x0, new_spare1 = 0x1, new_spare2 = 0x1, new_spare3 = 0x1
- [RTC] bbpu = 0xC, con = 0x426, cali = 0x300
- pl pmic powerkey Release
- [PLFM] Power key boot!
- [RTC] rtc_bbpu_power_on done
- [EMI] mcp_dram_num:0,discrete_dram_num:1,enable_combo_dis:0
- [EMI] PCDDR3
- [Check]mt_get_mdl_number 0x0
- [EMI] eMMC/NAND ID = 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
- [EMI] MDL number = 0
- [EMI] emi_set eMMC/NAND ID = 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
- [EMI][Vcore]0x21E=0x48,0x220=0x48
- [EMI][Vmem]0x554=0x0
- wait for frequency meter finish, CLK26CALI = 0x81
- [EMI] PCDDR3 DRAM Clock = 1333004 KHz, MEMPLL MODE = 2
- [EMI] PCDDR3 RXTDN Calibration:
- Start REXTDN SW calibration...
- drvp=0xB,drvn=0x9
- [EMI] pinmux = 4
- ==============================================================================
- dramc_write_leveling_swcal
- ==============================================================================
- delay byte0 byte1 byte2 byte3
- -----------------------------
- 0 1 1 1 1
- 1 1 1 1 1
- 2 1 1 1 1
- 3 1 1 1 1
- 4 1 1 1 1
- 5 1 1 1 1
- 6 1 1 1 1
- 7 1 1 1 1
- 8 1 1 1 1
- 9 1 1 1 1
- 10 1 1 1 1
- 11 1 1 1 1
- 12 1 1 1 1
- 13 1 1 1 1
- 14 1 1 1 1
- 15 1 1 1 1
- pass bytecount = 4
- byte_i status best delay
- 0 2 0
- 1 2 0
- 2 2 0
- 3 2 0
- ========================================
- [write leveling]DQS: 0x0, DQM: 0x0
- [write leveling after remap]DQ byte0 reg: 0x200 val: 0x0
- [write leveling after remap]DQ byte1 reg: 0x204 val: 0x0
- [write leveling after remap]DQ byte2 reg: 0x208 val: 0x0
- [write leveling after remap]DQ byte3 reg: 0x20C val: 0x0
- =============================================
- X-axis: DQS Gating Window Delay (Fine Scale)
- Y-axis: DQS Gating Window Delay (Coarse Scale)
- =============================================
- 0 8 16 24 32 40 48 56 64 72 80 88 96 104 0
- ------------------------------------------------------------------------
- 0000:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0001:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0002:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0003:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0004:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0005:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0006:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0007:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0008:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0009:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 000A:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 000B:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 000C:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 000D:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 000E:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 000F:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0010:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1
- 0011:| 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1
- 0012:| 0 0 1 1 1 1 1 1 1 1 1 1 1 0 0
- 0013:| 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0
- 0014:| 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0015:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0016:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0017:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0018:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0019:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 001A:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 001B:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 001C:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 001D:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 001E:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 001F:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- Rank 0 coarse tune value selection : 18, 18
- 18
- 56
- rank 0 coarse = 18
- rank 0 fine = 56
- 00:| 0 0 0 0 0 0 0 1 1 1 0 0
- opt_dle value:12
- ==================================================================
- RX DQS perbit delay software calibration
- ==================================================================
- 1.0-31 bit dq delay value
- ==================================================================
- bit| 0 1 2 3 4 5 6 7 8 9
- --------------------------------------
- 0 | 0 0 0 0 0 0 0 0 0 0
- 10 | 0 0 0 0 0 0 0 0 0 0
- 20 | 0 0 0 0 0 0 0 0 0 0
- 30 | 0 0
- --------------------------------------
- ==================================================================
- 2.dqs window
- x=pass dqs delay value (min~max)center
- y=0-7bit DQ of every group
- input delay:DQS0 =53 DQS1 = 44 DQS2 =56 DQS3 = 49
- ==================================================================
- bit DQS0 bit DQS1 bit DQS2 bit DQS3
- 0 (19~78)48 8 (6~68)37 16 (22~79)50 24 (16~70)43
- 1 (18~78)48 9 (7~70)38 17 (21~79)50 25 (15~70)42
- 2 (20~79)49 10 (9~72)40 18 (26~81)53 26 (15~72)43
- 3 (17~75)46 11 (13~71)42 19 (21~78)49 27 (18~71)44
- 4 (20~81)50 12 (13~74)43 20 (25~85)55 28 (21~78)49
- 5 (20~81)50 13 (13~73)43 21 (23~82)52 29 (17~75)46
- 6 (24~81)52 14 (11~72)41 22 (22~84)53 30 (13~70)41
- 7 (24~82)53 15 (15~74)44 23 (29~84)56 31 (17~76)46
- ==================================================================
- 3.dq delay value last
- ==================================================================
- bit| 0 1 2 3 4 5 6 7 8 9
- --------------------------------------
- 0 | 5 5 4 7 3 3 1 0 7 6
- 10 | 4 2 1 1 3 0 6 6 3 7
- 20 | 1 4 3 0 6 7 6 5 0 3
- 30 | 8 3
- ==================================================================
- *DQIDLY1 = 0x7040505
- *DQIDLY2 = 0x10303
- *DQIDLY3 = 0x2040607
- *DQIDLY4 = 0x30101
- *DQIDLY5 = 0x7030606
- *DQIDLY6 = 0x30401
- *DQIDLY7 = 0x5060706
- *DQIDLY8 = 0x3080300
- *DRAMC_R0DELDLY = 0x31382C35
- [MEM]CONA:F3A2,conf1:F07486A3
- DM4BitMux = 1
- [Warning] DQSO 0 in TX per-bit = 1 > DQSO 0 in WL = 0
- DQSO 1 in TX per-bit = 0 <= DQSO 1 in WL = 0
- [Warning] DQSO 2 in TX per-bit = 8 > DQSO 2 in WL = 0
- [Warning] DQSO 3 in TX per-bit = 7 > DQSO 3 in WL = 0
- Tx DQM dly = 0x1220
- Tx DQM dly bit4 = 0x0
- DRAMC_DQODLY1=111233h
- DRAMC_DQODLY2=22231020h
- DRAMC_DQODLY3=3432111h
- DRAMC_DQODLY4=12013223h
- Tx DQ dly bit4 = 0x0
- Tx DQS dly = 0x7801
- Tx DQS dly bit4 = 0x0
- TX Byte0: DQ - 19, DQS - 20. win_sum= 38
- TX Byte1: DQ - 24, DQS - 18. win_sum= 41
- TX Byte2: DQ - 12, DQS - 24. win_sum= 35
- TX Byte3: DQ - 14, DQS - 26. win_sum= 39
- DRAMC calibration takes 650571924 CPU cycles
- [EMI] DRAMC calibration passed
- [MEM] complex R/W mem test pass
- 0:dram_rank_size:80000000
- [Dram_Buffer] dram size:-2147483648
- [Dram_Buffer] structure size: 1725560
- [Dram_Buffer] MAX_TEE_DRAM_SIZE: 0
- Boot from SD Card!!
- [PLFM] Init Boot Device: OK(0)
- [PART] blksz: 512B
- [PART] [0x0000000000000000-0x000000000003FFFF] "PRELOADER" (512 blocks)
- [PART] [0x0000000000000000-0x000000000003FFFF] "MBR" (512 blocks)
- [PART] [0x0000000000040000-0x00000000000BFFFF] "UBOOT" (1024 blocks)
- [PART] [0x00000000000C0000-0x00000000000FFFFF] "CONFIG" (512 blocks)
- [PART] [0x0000000000100000-0x000000000013FFFF] "FACTORY" (512 blocks)
- [PART] [0x0000000000140000-0x000000000213FFFF] "BOOTIMG" (65536 blocks)
- [PART] [0x0000000002140000-0x000000000413FFFF] "RECOVERY" (65536 blocks)
- [PART] [0x0000000004140000-0x000000004413FFFF] "ROOTFS" (2097152 blocks)
- [PART] [0x0000000044140000-0x000001FFC413FFFF] "USER" (-4194304 blocks)
- [platform_vusb_on] PASS
- [TOOL] PMIC not dectect usb cable!
- [TOOL] <UART> listen ended, receive size:0!
- [TOOL] <UART> wait sync time 150ms->5ms
- [TOOL] <UART> receieved data: ()
- Device APC domain init setup:
- bootloader load uboot ,the address of uboot is 81E00000
- [PART]partition name UBOOT
- [PART]partition start block 0x200
- [PART]partition size 0x80000
- [PART]partition blks 0x400
- [PART]partition flags 0x0
- [PART]partition name 0x8
- [bean] part->startblk(0x200) bdev->blksz(0x200) part->part_id(8) hdr(0xFFB500)
- [BlkDev.c 101 ]partition block size 0x200 ,blks:0x1DACC00
- [BlkDev.c 101 ]partition block erase size 0x200
- [PART] load "UBOOT" from 0x0000000000050000 (dev) to 0x81E00000 (mem) [SUCCES]
- [PART] load speed: 5744KB/s, 300000 bytes, 51ms
- [BT_SD_PG] device info 0x8590 0x8A00 0xCB01 0x102
- 0:dram_rank_size:80000000
- [PLFM] md_type[0] = 255
- [PLFM] md_type[1] = 127
- [PLFM] boot reason: 0
- [PLFM] boot mode: 0
- [PLFM] META COM0: 0
- [PLFM] <0xFFB7CC10>: 0x0
- [PLFM] boot time: 2936ms
- [PLFM] DDR reserve mode: enable = 0, success = 0
- [BLDR] jump to 0x81E00000
- [BLDR] <0x81E00000>=0xEA00000F
- [BLDR] <0x81E00004>=0xE59FF014
- U-Boot (May 27 2018 - 19:51:50)
- ================== Iverson debug. ===========================
- g_nr_bank = 1.
- g_total_rank_size = 0x80000000
- BPI: SD/eMMC SD=1 eMMC=0 id = 1 (drivers/mmc/mediatek/mtk_mmc.c)
- __mmc_init ret = 0
- ret2 = 1
- ret2 = 1
- BPI: g_mtk_mmc_block.dev = 1
- <= [mmc1 block 0] =>
- [0x00000000] 53 44 4d 4d 43 5f 42 4f
- [0x00000008] 4f 54 00 00 01 00 00 00
- [0x00000010] 00 02 00 00 ff ff ff ff
- [0x00000018] ff ff ff ff ff ff ff ff
- [0x00000020] ff ff ff ff ff ff ff ff
- [0x00000028] ff ff ff ff ff ff ff ff
- [0x00000030] ff ff ff ff ff ff ff ff
- [0x00000038] ff ff ff ff ff ff ff ff
- [0x00000040] ff ff ff ff ff ff ff ff
- [0x00000048] ff ff ff ff ff ff ff ff
- [0x00000050] ff ff ff ff ff ff ff ff
- [0x00000058] ff ff ff ff ff ff ff ff
- [0x00000060] ff ff ff ff ff ff ff ff
- [0x00000068] ff ff ff ff ff ff ff ff
- [0x00000070] ff ff ff ff ff ff ff ff
- [0x00000078] ff ff ff ff ff ff ff ff
- [0x00000080] ff ff ff ff ff ff ff ff
- [0x00000088] ff ff ff ff ff ff ff ff
- [0x00000090] ff ff ff ff ff ff ff ff
- [0x00000098] ff ff ff ff ff ff ff ff
- [0x000000a0] ff ff ff ff ff ff ff ff
- [0x000000a8] ff ff ff ff ff ff ff ff
- [0x000000b0] ff ff ff ff ff ff ff ff
- [0x000000b8] ff ff ff ff ff ff ff ff
- [0x000000c0] ff ff ff ff ff ff ff ff
- [0x000000c8] ff ff ff ff ff ff ff ff
- [0x000000d0] ff ff ff ff ff ff ff ff
- [0x000000d8] ff ff ff ff ff ff ff ff
- [0x000000e0] ff ff ff ff ff ff ff ff
- [0x000000e8] ff ff ff ff ff ff ff ff
- [0x000000f0] ff ff ff ff ff ff ff ff
- [0x000000f8] ff ff ff ff ff ff ff ff
- [0x00000100] ff ff ff ff ff ff ff ff
- [0x00000108] ff ff ff ff ff ff ff ff
- [0x00000110] ff ff ff ff ff ff ff ff
- [0x00000118] ff ff ff ff ff ff ff ff
- [0x00000120] ff ff ff ff ff ff ff ff
- [0x00000128] ff ff ff ff ff ff ff ff
- [0x00000130] ff ff ff ff ff ff ff ff
- [0x00000138] ff ff ff ff ff ff ff ff
- [0x00000140] ff ff ff ff ff ff ff ff
- [0x00000148] ff ff ff ff ff ff ff ff
- [0x00000150] ff ff ff ff ff ff ff ff
- [0x00000158] ff ff ff ff ff ff ff ff
- [0x00000160] ff ff ff ff ff ff ff ff
- [0x00000168] ff ff ff ff ff ff ff ff
- [0x00000170] ff ff ff ff ff ff ff ff
- [0x00000178] ff ff ff ff ff ff ff ff
- [0x00000180] ff ff ff ff ff ff ff ff
- [0x00000188] ff ff ff ff ff ff ff ff
- [0x00000190] ff ff ff ff ff ff ff ff
- [0x00000198] ff ff ff ff ff ff ff ff
- [0x000001a0] ff ff ff ff ff ff ff ff
- [0x000001a8] ff ff ff ff ff ff ff ff
- [0x000001b0] ff ff ff ff ff ff ff ff
- [0x000001b8] cd d6 0e 00 00 00 00 be
- [0x000001c0] 33 0c 0c 61 34 2d 00 20
- [0x000001c8] 03 00 00 00 08 00 00 61
- [0x000001d0] 35 2d 83 81 cb b6 00 20
- [0x000001d8] 0b 00 00 e0 dd 00 00 00
- [0x000001e0] 00 00 00 00 00 00 00 00
- [0x000001e8] 00 00 00 00 00 00 00 00
- [0x000001f0] 00 00 00 00 00 00 00 00
- [0x000001f8] 00 00 00 00 00 00 55 aa
- Partition Map for MMC device 1 -- Partition Type: DOS
- Part Start Sector Num Sectors UUID Type
- 1 204800 524288 000ed6cd-01 0c
- 2 729088 14540800 000ed6cd-02 83
- mmc1 is available
- Interface: MMC
- Device 1: Vendor: Man 000003 Snr e059af01 Rev: 4.9 Prod: SS16G�
- Type: Removable Hard Disk
- Capacity: 15193.5 MB = 14.8 GB (31116288 x 512)
- Filesystem: FAT16 "BPI-BOOT "
- Boot from SD
- reading bananapi/bpi-r2/linux/uEnv.txt
- 75 bytes read in 7 ms (9.8 KiB/s)
- Loaded environment from uEnv.txt
- ## Error: "uenvcmd" not defined
- reading bananapi/bpi-r2/linux/uImage
- 7714262 bytes read in 985 ms (7.5 MiB/s)
- bootm flag=0, states=70f
- ## Booting kernel from Legacy Image at 84000000 ...
- Image Name: Linux Kernel 4.19.72-main
- Image Type: ARM Linux Kernel Image (uncompressed)
- Data Size: 7714198 Bytes = 7.4 MiB
- Load Address: 80008000
- Entry Point: 80008000
- Verifying Checksum ... OK
- Loading Kernel Image ... OK
- Starting kernel ...
- [ 3.957182] console [ttyS0] enabled
- [ 3.964164] bootconsole [earlycon0] disabled
- [ 3.993737] 11002000.serial: ttyS1 at MMIO 0x11002000 (irq = 202, base_bau2
- [ 4.023903] 11003000.serial: ttyS2 at MMIO 0x11003000 (irq = 203, base_bau2
- [ 4.034210] mtk_rng 1020f000.rng: registered RNG driver
- [ 4.034360] random: fast init done
- [ 4.042946] mediatek-drm 14000000.dispsys: Adding component match for /ovl0
- [ 4.042999] random: crng init done
- [ 4.050623] mediatek-drm 14000000.dispsys: Adding component match for /rdm0
- [ 4.061782] mediatek-drm 14000000.dispsys: Adding component match for /col0
- [ 4.069673] mediatek-drm 14000000.dispsys: Adding component match for /rdm0
- [ 4.077404] mediatek-drm 14000000.dispsys: Adding component match for /dpi0
- [ 4.086701] mediatek-hdmi-phy 10209100.phy: Using default TX DRV impedance6
- [ 4.096412] [drm] hdmi-audio-codec driver bound to HDMI
- [ 4.110040] loop: module loaded
- [ 4.113338] [WMT-DETECT][I]wmt_detect_driver_init:driver(major 154) instals
- [ 4.121238] [SDIO-DETECT][I]sdio_detect_init:sdio_register_driver() ret=0
- [ 4.128204] MTK-BTIF[E]hal_btif_clk_get_and_prepare(286):[CCF]clk_btif=306d
- [ 4.135507] MTK-BTIF[E]hal_btif_clk_get_and_prepare(292):[CCF]clk_btif_apd6
- [ 4.145351] mt6323-regulator mt6323-regulator: Chip ID = 0x2023
- [ 4.159697] Uniform Multi-Platform E-IDE driver
- [ 4.164324] ide-gd driver 1.18
- [ 4.167917] libphy: Fixed MDIO Bus: probed
- [ 4.195178] libphy: mdio: probed
- [ 4.199130] mtk_soc_eth 1b100000.ethernet: connected mac 0 to PHY at fixed]
- [ 4.209933] mtk_soc_eth 1b100000.ethernet eth0: mediatek frame engine at 08
- [ 4.218819] mtk_soc_eth 1b100000.ethernet: connected mac 1 to PHY at fixed]
- [ 4.229588] mtk_soc_eth 1b100000.ethernet eth1: mediatek frame engine at 08
- [ 4.238585] xhci-mtk 1a1c0000.usb: Linked as a consumer to regulator.3
- [ 4.245159] xhci-mtk 1a1c0000.usb: Linked as a consumer to regulator.2
- [ 4.251923] xhci-mtk 1a1c0000.usb: xHCI Host Controller
- [ 4.257169] xhci-mtk 1a1c0000.usb: new USB bus registered, assigned bus nu1
- [ 4.268027] xhci-mtk 1a1c0000.usb: hcc params 0x01401198 hci version 0x96 0
- [ 4.277111] xhci-mtk 1a1c0000.usb: irq 225, io mem 0x1a1c0000
- [ 4.283838] hub 1-0:1.0: USB hub found
- [ 4.287649] hub 1-0:1.0: 1 port detected
- [ 4.291948] xhci-mtk 1a1c0000.usb: xHCI Host Controller
- [ 4.297179] xhci-mtk 1a1c0000.usb: new USB bus registered, assigned bus nu2
- [ 4.304555] xhci-mtk 1a1c0000.usb: Host supports USB 3.0 SuperSpeed
- [ 4.310867] usb usb2: We don't know the algorithms for LPM for this host, .
- [ 4.319583] hub 2-0:1.0: USB hub found
- [ 4.323353] hub 2-0:1.0: 1 port detected
- [ 4.327851] xhci-mtk 1a240000.usb: Linked as a consumer to regulator.3
- [ 4.334419] xhci-mtk 1a240000.usb: Linked as a consumer to regulator.2
- [ 4.341159] xhci-mtk 1a240000.usb: xHCI Host Controller
- [ 4.346393] xhci-mtk 1a240000.usb: new USB bus registered, assigned bus nu3
- [ 4.357076] xhci-mtk 1a240000.usb: hcc params 0x01401198 hci version 0x96 0
- [ 4.366156] xhci-mtk 1a240000.usb: irq 226, io mem 0x1a240000
- [ 4.372762] hub 3-0:1.0: USB hub found
- [ 4.376565] hub 3-0:1.0: 1 port detected
- [ 4.380845] xhci-mtk 1a240000.usb: xHCI Host Controller
- [ 4.386069] xhci-mtk 1a240000.usb: new USB bus registered, assigned bus nu4
- [ 4.393429] xhci-mtk 1a240000.usb: Host supports USB 3.0 SuperSpeed
- [ 4.399862] usb usb4: We don't know the algorithms for LPM for this host, .
- [ 4.408563] hub 4-0:1.0: USB hub found
- [ 4.412329] hub 4-0:1.0: 1 port detected
- [ 4.416890] usbcore: registered new interface driver usb-storage
- [ 4.423214] mousedev: PS/2 mouse device common for all mice
- [ 4.429923] mt6397-rtc mt6323-rtc: registered as rtc0
- [ 4.436803] MTK_WDT_NONRST_REG(0)
- [ 4.440780] mtk-wdt 10007000.watchdog: Watchdog enabled (timeout=31 sec, n)
- [ 4.450388] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm
- [ 4.459176] device-mapper: multipath round-robin: version 1.2.0 loaded
- [ 4.465701] device-mapper: multipath queue-length: version 0.2.0 loaded
- [ 4.472271] device-mapper: multipath service-time: version 0.3.0 loaded
- [ 4.478916] device-mapper: raid: Loading target version 1.14.0
- [ 4.485178] cpu cpu0: Linked as a consumer to regulator.4
- [ 4.490584] cpu cpu0: dummy supplies not allowed for exclusive requests
- [ 4.499090] mtk-msdc 11240000.mmc: Got CD GPIO
- [ 4.503651] mtk-msdc 11240000.mmc: Linked as a consumer to regulator.2
- [ 4.535270] mtk-msdc 11230000.mmc: Linked as a consumer to regulator.2
- [ 4.541827] mtk-msdc 11230000.mmc: Linked as a consumer to regulator.1
- [ 4.578491] hidraw: raw HID events driver (C) Jiri Kosina
- [ 4.584102] usbcore: registered new interface driver usbhid
- [ 4.589640] usbhid: USB HID core driver
- [ 4.594601] mtk-iommu-v1 10205000.mmsys_iommu: bound 14010000.larb (ops mt)
- [ 4.603602] mtk-iommu-v1 10205000.mmsys_iommu: bound 16010000.larb (ops mt)
- [ 4.612617] mtk-iommu-v1 10205000.mmsys_iommu: bound 15001000.larb (ops mt)
- [ 4.622863] NET: Registered protocol family 17
- [ 4.627658] NET: Registered protocol family 41
- [ 4.632307] 8021q: 802.1Q VLAN Support v1.8
- [ 4.637050] ThumbEE CPU extension supported.
- [ 4.641303] Registering SWP/SWPB emulation handler
- [ 4.646275] mmc0: host does not support reading read-only switch, assuminge
- [ 4.654735] Loading compiled-in X.509 certificates
- [ 4.659330] mmc0: new high speed SDHC card at address aaaa
- [ 4.668179] mmcblk0: mmc0:aaaa SS16G 14.8 GiB
- [ 4.678557] mmcblk0: p1 p2
- [ 4.702343] mmc1: new high speed MMC card at address 0001
- [ 4.710129] mmcblk1: mmc1:0001 8GTF4R 7.28 GiB
- [ 4.716766] mmcblk1boot0: mmc1:0001 8GTF4R partition 1 4.00 MiB
- [ 4.724756] mmcblk1boot1: mmc1:0001 8GTF4R partition 2 4.00 MiB
- [ 4.730909] mmcblk1rpmb: mmc1:0001 8GTF4R partition 3 512 KiB, chardev (24)
- [ 4.780932] mtk-pcie 1a140000.pcie: Port0 link down
- [ 4.814078] usb 3-1: new low-speed USB device number 2 using xhci-mtk
- [ 4.816297] mtk-pcie 1a140000.pcie: PCI host bridge to bus 0000:00
- [ 4.826650] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] (bus ad)
- [ 4.836089] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff]
- [ 4.842920] pci_bus 0000:00: root bus resource [bus 00-ff]
- [ 4.848616] pci 0000:00:01.0: [14c3:0801] type 01 class 0x060400
- [ 4.854648] pci 0000:00:01.0: reg 0x14: [mem 0x00000000-0x0000ffff]
- [ 4.860937] pci 0000:00:01.0: supports D1
- [ 4.864936] pci 0000:00:01.0: PME# supported from D0 D1 D3hot
- [ 4.873614] PCI: bus0: Fast back to back transfers disabled
- [ 4.879190] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), g
- [ 4.887325] pci 0000:01:00.0: [1b21:0611] type 00 class 0x010185
- [ 4.893324] pci 0000:01:00.0: reg 0x10: initial BAR value 0x00000000 invald
- [ 4.900343] pci 0000:01:00.0: reg 0x10: [io size 0x0008]
- [ 4.905727] pci 0000:01:00.0: reg 0x14: initial BAR value 0x00000000 invald
- [ 4.912729] pci 0000:01:00.0: reg 0x14: [io size 0x0004]
- [ 4.918114] pci 0000:01:00.0: reg 0x18: initial BAR value 0x00000000 invald
- [ 4.925128] pci 0000:01:00.0: reg 0x18: [io size 0x0008]
- [ 4.930500] pci 0000:01:00.0: reg 0x1c: initial BAR value 0x00000000 invald
- [ 4.937516] pci 0000:01:00.0: reg 0x1c: [io size 0x0004]
- [ 4.942887] pci 0000:01:00.0: reg 0x20: initial BAR value 0x00000000 invald
- [ 4.949900] pci 0000:01:00.0: reg 0x20: [io size 0x0010]
- [ 4.955285] pci 0000:01:00.0: reg 0x24: [mem 0x00000000-0x000001ff]
- [ 4.961520] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
- [ 4.996871] PCI: bus1: Fast back to back transfers disabled
- [ 5.002428] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
- [ 5.004557] input: SIGMACHIP USB Keyboard as /devices/platform/1a240000.us0
- [ 5.009087] pci 0000:00:01.0: BAR 8: assigned [mem 0x60000000-0x600fffff]
- [ 5.027049] pci 0000:00:01.0: BAR 9: assigned [mem 0x60100000-0x601fffff p]
- [ 5.034246] pci 0000:00:01.0: BAR 1: assigned [mem 0x60200000-0x6020ffff]
- [ 5.040995] pci 0000:00:01.0: BAR 7: assigned [io 0x1000-0x1fff]
- [ 5.047072] pci 0000:01:00.0: BAR 6: assigned [mem 0x60100000-0x6010ffff p]
- [ 5.054268] pci 0000:01:00.0: BAR 5: assigned [mem 0x60000000-0x600001ff]
- [ 5.061017] pci 0000:01:00.0: BAR 4: assigned [io 0x1000-0x100f]
- [ 5.067093] pci 0000:01:00.0: BAR 0: assigned [io 0x1010-0x1017]
- [ 5.073152] pci 0000:01:00.0: BAR 2: assigned [io 0x1018-0x101f]
- [ 5.079227] pci 0000:01:00.0: BAR 1: assigned [io 0x1020-0x1023]
- [ 5.084698] hid-generic 0003:1C4F:0002.0001: input,hidraw0: USB HID v1.10 0
- [ 5.085308] pci 0000:01:00.0: BAR 3: assigned [io 0x1024-0x1027]
- [ 5.101033] input: SIGMACHIP USB Keyboard Consumer Control as /devices/pla1
- [ 5.103533] pci 0000:00:01.0: PCI bridge to [bus 01]
- [ 5.121181] pci 0000:00:01.0: bridge window [io 0x1000-0x1fff]
- [ 5.127260] pci 0000:00:01.0: bridge window [mem 0x60000000-0x600fffff]
- [ 5.134006] pci 0000:00:01.0: bridge window [mem 0x60100000-0x601fffff p]
- [ 5.141363] pcieport 0000:00:01.0: enabling device (0140 -> 0143)
- [ 5.147634] pcieport 0000:00:01.0: Signaling PME with IRQ 223
- [ 5.153518] pcieport 0000:00:01.0: AER enabled with IRQ 223
- [ 5.159314] ahci 0000:01:00.0: version 3.0
- [ 5.163396] ahci 0000:01:00.0: enabling device (0140 -> 0143)
- [ 5.169231] ahci 0000:01:00.0: SSS flag set, parallel bus scan disabled
- [ 5.175872] ahci 0000:01:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 e
- [ 5.183831] ahci 0000:01:00.0: flags: 64bit ncq sntf stag led clo pmp pio
- [ 5.184449] input: SIGMACHIP USB Keyboard System Control as /devices/platf2
- [ 5.205123] hid-generic 0003:1C4F:0002.0002: input,hidraw1: USB HID v1.10 1
- [ 5.218915] scsi host0: ahci
- [ 5.222453] scsi host1: ahci
- [ 5.225674] ata1: SATA max UDMA/133 abar m512@0x60000000 port 0x60000100 i3
- [ 5.233030] ata2: SATA max UDMA/133 abar m512@0x60000000 port 0x60000180 i3
- [ 5.240800] mediatek-dpi 14014000.dpi: Found bridge node: /hdmi@14015000
- [ 5.247842] mediatek-drm 14000000.dispsys: bound 14007000.ovl (ops mtk_dis)
- [ 5.256463] mediatek-drm 14000000.dispsys: bound 14008000.rdma (ops mtk_di)
- [ 5.265218] mediatek-drm 14000000.dispsys: bound 1400b000.color (ops mtk_d)
- [ 5.274141] mediatek-drm 14000000.dispsys: bound 14012000.rdma (ops mtk_di)
- [ 5.282899] mediatek-drm 14000000.dispsys: bound 14014000.dpi (ops mtk_dpi)
- [ 5.291127] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
- [ 5.297722] [drm] No driver support for vblank timestamp query.
- [ 5.419974] Console: switching to colour frame buffer device 240x67
- [ 5.459648] mediatek-drm 14000000.dispsys: fb0: frame buffer device
- [ 5.466622] [drm] Initialized mediatek 1.0.0 20150513 for 14000000.dispsys0
- [ 5.475164] mt6397-rtc mt6323-rtc: setting system clock to 2010-01-01 00:0)
- [ 5.484274] cfg80211: Loading compiled-in X.509 certificates for regulatore
- [ 5.495063] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
- [ 5.502161] vpa: disabling
- [ 5.504975] vusb: disabling
- [ 5.507827] vmc: disabling
- [ 5.510586] vmch: disabling
- [ 5.513432] vemc3v3: disabling
- [ 5.516571] vgp1: disabling
- [ 5.519441] vcamaf: disabling
- [ 5.522492] ALSA device list:
- [ 5.525526] No soundcards found.
- [ 5.529520] platform regulatory.0: Direct firmware load for regulatory.db 2
- [ 5.538321] cfg80211: failed to load regulatory.db
- [ 5.578788] ata1: SATA link down (SStatus 0 SControl 300)
- [ 5.915581] ata2: SATA link down (SStatus 0 SControl 300)
- [ 5.921201] md: Waiting for all devices to be available before autodetect
- [ 5.928143] md: If you don't use raid, use raid=noautodetect
- [ 5.934667] md: Autodetecting RAID arrays.
- [ 5.938843] md: autorun ...
- [ 5.941681] md: ... autorun DONE.
- [ 5.957061] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode)
- [ 5.965405] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
- [ 5.981708] devtmpfs: mounted
- [ 5.987967] Freeing unused kernel memory: 1024K
- [ 6.024319] Run /sbin/init as init process
- [ 6.539018] systemd[1]: System time before build time, advancing clock.
- [ 7.053000] NET: Registered protocol family 10
- [ 7.058911] Segment Routing with IPv6
- [ 7.138306] systemd[1]: systemd 243.51-1-arch running in system mode. (+PA)
- [ 7.161860] systemd[1]: Detected architecture arm.
- [ 7.166827] systemd[1]: Running with unpopulated /etc.
- Welcome to Arch Linux ARM!
- [ 7.217057] systemd[1]: Set hostname to <alarm>.
- [ 7.221858] systemd[1]: System cannot boot: Missing /etc/machine-id and /e.
- [ 7.239722] systemd[1]: Booting up is supported only when:
- [ 7.254034] systemd[1]: 1) /etc/machine-id exists and is populated.
- [ 7.269140] systemd[1]: 2) /etc/machine-id exists and is empty.
- [ 7.283772] systemd[1]: 3) /etc/machine-id is missing and /etc is writable.
- [ 8.061735] systemd[1]: Configuration file /usr/lib/systemd/system/getty@..
- [ OK ] Created slice system-getty.slice.
- [ OK ] Created slice system-serial\x2dgetty.slice.
- [ OK ] Created slice User and Session Slice.
- [ OK ] Started Dispatch Password ��…ts to Console Directory Watch.
- [ OK ] Started Forward Password R�…uests to Wall Directory Watch.
- [ OK ] Reached target Local Encrypted Volumes.
- [ OK ] Reached target Paths.
- [ OK ] Reached target Remote File Systems.
- [ OK ] Reached target Slices.
- [ OK ] Reached target Swap.
- [ OK ] Listening on Device-mapper event daemon FIFOs.
- [ OK ] Listening on LVM2 metadata daemon socket.
- [ OK ] Listening on LVM2 poll daemon socket.
- [ OK ] Listening on Process Core Dump Socket.
- [ OK ] Listening on initctl Compatibility Named Pipe.
- [ OK ] Listening on Journal Socket (/dev/log).
- [ OK ] Listening on Journal Socket.
- [ OK ] Listening on Network Service Netlink Socket.
- [ OK ] Listening on udev Control Socket.
- [ OK ] Listening on udev Kernel Socket.
- Mounting POSIX Message Queue File System...
- Mounting Kernel Debug File System...
- Mounting Temporary Directory (/tmp)...
- Starting Create list of st��…odes for the current kernel...
- Starting Monitoring of LVM��…meventd or progress polling...
- Starting Load Kernel Modules...
- Starting Remount Root and Kernel File Systems...
- Starting udev Coldplug all Devices...
- [ 9.569922] cryptodev: loading out-of-tree module taints kernel.
- [ OK ] Mounted 9.588150] cryptodev: driver 1.10 loaded.
- ;39mPOSIX Message Queue File System.
- [ OK ] Mounted Kernel Debug File System.
- [ OK ] Mounted Temporary Directory (/tmp).
- [ OK ] Started Create list of sta��… nodes for the current kernel.
- [ OK ] Started Load Kernel Modules.
- [ OK ] Started Remount Root and Kernel File Systems.
- [ OK ] Started LVM2 metadata daemon.
- Starting Load/Save Random Seed...
- Starting Apply Kernel Variables...
- Starting Create Static Device Nodes in /dev...
- [ OK ] Started Load/Save Random Seed.
- [ OK ] Started Apply Kernel Variables.
- [ OK ] Started Create Static Device Nodes in /dev.
- [ OK ] Started Entropy Daemon based on the HAVEGE algorithm.
- Starting Journal Service...
- Starting udev Kernel Device Manager...
- [ OK ] Started udev Coldplug all Devices.
- [ OK ] Started udev Kernel Device Manager.
- Starting Network Service...
- [ OK ] Started Journal Service.
- Starting Flush Journal to Persistent Storage...
- [ 10.774545] systemd-journald[170]: Received client request to flush runtim.
- [ OK 10.825968] input: mtk-pmic-keys as /devices/platform/1000d000.pwrap3
- 0m] Started Flush Journal to Persistent Storage.
- [ OK ] Found device /dev/ttyS0.
- [ 10.957758] mtk-thermal 1100b000.thermal: Device not calibrated, using defs
- [ OK ] Listening on Load/Save RF ��…itch Status /dev/rfkill Watch.
- [ 11.380256] bridge: filtering via arp/ip/ip6tables is no longer available .
- [ OK ] Started Network Service.
- [ 11.606879] mt7530 mdio-bus:00: Linked as a consumer to regulator.6
- [ 11.622929] mt7530 mdio-bus:00: Linked as a consumer to regulator.17
- [ OK ] Started Monitoring of LVM2��… dmeventd or progress polling.
- [ 11.887160] libphy: dsa slave smi: probed
- [ 11.919358] mt7530 mdio-bus:00 wan (uninitialized): PHY [dsa-0.0:00] drive]
- [ 11.949424] mt7530 mdio-bus:00 lan0 (uninitialized): PHY [dsa-0.0:01] driv]
- [ 11.984239] mt7530 mdio-bus:00 lan1 (uninitialized): PHY [dsa-0.0:02] driv]
- [ 12.011241] mt7530 mdio-bus:00 lan2 (uninitialized): PHY [dsa-0.0:03] driv]
- [ 12.045813] mt7530 mdio-bus:00 lan3 (uninitialized): PHY [dsa-0.0:04] driv]
- [ 12.170256] DSA: tree 0 setup
- [ OK ] Reached target Local File Systems (Pre).
- [ OK ] Reached target Local File Systems.
- Starting Create Volatile Files and Directories...
- [ OK ] Started Create Volatile Files and Directories.
- [FAILED] Failed to start Network Name Resolution.
- See 'systemctl status systemd-resolved.service' for details.
- [ OK ] Reached target Network.
- [ OK ] Reached target Host and Network Name Lookups.
- [FAILED] Failed to start Network Time Synchronization.
- See 'systemctl status systemd-timesyncd.service' for details.
- [ OK ] Reached target System Time Set.
- [ OK ] Reached target System Time Synchronized.
- Starting Update UTMP about System Boot/Shutdown...
- [ OK ] Stopped Network Name Resolution.
- [FAILED] Failed to start Network Name Resolution.
- See 'systemctl status systemd-resolved.service' for details.
- [ OK ] Stopped Network Time Synchronization.
- [FAILED] Failed to start Network Time Synchronization.
- See 'systemctl status systemd-timesyncd.service' for details.
- [ OK ] Stopped Network Name Resolution.
- [FAILED] Failed to start Network Name Resolution.
- See 'systemctl status systemd-resolved.service' for details.
- [ OK ] Stopped Network Time Synchronization.
- [FAILED] Failed to start Network Time Synchronization.
- See 'systemctl status systemd-timesyncd.service' for details.
- [ OK ] Stopped Network Name Resolution.
- [FAILED] Failed to start Network Name Resolution.
- See 'systemctl status systemd-resolved.service' for details.
- [ OK ] Stopped Network Time Synchronization.
- [FAILED] Failed to start Network Time Synchronization.
- See 'systemctl status systemd-timesyncd.service' for details.
- [ OK ] Started Update UTMP about System Boot/Shutdown.
- [ OK ] Stopped Network Name Resolution.
- [FAILED] Failed to start Network Name Resolution.
- See 'systemctl status systemd-resolved.service' for details.
- [ OK ] Stopped Network Time Synchronization.
- [FAILED] Failed to start Network Time Synchronization.
- See 'systemctl status systemd-timesyncd.service' for details.
- [ OK ] Reached target System Initialization.
- [ OK ] Started Daily rotation of log files.
- [ OK ] Started Daily man-db regeneration.
- [ OK ] Started Daily verification of password and group files.
- [ OK ] Started Daily Cleanup of Temporary Directories.
- [ OK ] Reached target Timers.
- [ OK ] Listening on D-Bus System Message Bus Socket.
- [ OK ] Reached target Sockets.
- [ OK ] Reached target Basic System.
- [ OK ] Started D-Bus System Message Bus.
- Starting SSH Key Generation...
- [FAILED] Failed to start Login Service.
- See 'systemctl status systemd-logind.service' for details.
- Starting Permit User Sessions...
- [ OK ] Started SSH Key Generation.
- [ OK ] Started Permit User Sessions.
- [ OK ] Started Getty on tty1.
- [ OK ] Started Serial Getty on ttyS0.
- [ OK ] Reached target Login Prompts.
- [ OK ] Started OpenSSH Daemon.
- [ OK ] Stopped Login Service.
- [FAILED] Failed to start Login Service.
- See 'systemctl status systemd-logind.service' for details.
- [ OK ] Reached target Multi-User System.
- [ OK ] Reached target Graphical Interface.
- [ OK ] Stopped Network Name Resolution.
- [FAILED] Failed to start Network Name Resolution.
- See 'systemctl status systemd-resolved.service' for details.
- [ OK ] Stopped Network Time Synchronization.
- [FAILED] Failed to start Network Time Synchronization.
- See 'systemctl status systemd-timesyncd.service' for details.
- Arch Linux 4.19.72-bpi-r2-main (ttyS0)
- alarm login: alarm
- Password:
- Authentication failure
- Arch Linux 4.19.72-bpi-r2-main (ttyS0)
- alarm login: root
- Password:
- Authentication failure
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement