Advertisement
Bullet64

rp64_md0

Jan 20th, 2019
256
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 39.59 KB | None | 0 0
  1. rock64@rockpro64v_2_1:~$ dmesg
  2. [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
  3. [ 0.000000] Linux version 4.20.0-1083-ayufan-g686e1f1aa461 (root@runner-f725ff63-project-6422644-concurrent-0) (gcc version 7.3.0 (Ubuntu/Linaro 7.3.0-16ubuntu3)) #ayufan SMP PREEMPT Sun Dec 30 13:42:26 UTC 2018
  4. [ 0.000000] Machine model: Pine64 RockPro64
  5. [ 0.000000] earlycon: uart8250 at MMIO32 0x00000000ff1a0000 (options '')
  6. [ 0.000000] printk: bootconsole [uart8250] enabled
  7. [ 0.000000] efi: Getting EFI parameters from FDT:
  8. [ 0.000000] efi: UEFI not found.
  9. [ 0.000000] cma: Reserved 16 MiB at 0x000000007f000000
  10. [ 0.000000] NUMA: No NUMA configuration found
  11. [ 0.000000] NUMA: Faking a node at [mem 0x0000000000200000-0x000000007fffffff]
  12. [ 0.000000] NUMA: NODE_DATA [mem 0x7efa4840-0x7efa5fff]
  13. [ 0.000000] Zone ranges:
  14. [ 0.000000] DMA32 [mem 0x0000000000200000-0x000000007fffffff]
  15. [ 0.000000] Normal empty
  16. [ 0.000000] Movable zone start for each node
  17. [ 0.000000] Early memory node ranges
  18. [ 0.000000] node 0: [mem 0x0000000000200000-0x000000007fffffff]
  19. [ 0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x000000007fffffff]
  20. [ 0.000000] On node 0 totalpages: 523776
  21. [ 0.000000] DMA32 zone: 8184 pages used for memmap
  22. [ 0.000000] DMA32 zone: 0 pages reserved
  23. [ 0.000000] DMA32 zone: 523776 pages, LIFO batch:63
  24. [ 0.000000] psci: probing for conduit method from DT.
  25. [ 0.000000] psci: PSCIv1.0 detected in firmware.
  26. [ 0.000000] psci: Using standard PSCI v0.2 function IDs
  27. [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
  28. [ 0.000000] psci: SMC Calling Convention v1.0
  29. [ 0.000000] random: get_random_bytes called from start_kernel+0xa8/0x418 with crng_init=0
  30. [ 0.000000] percpu: Embedded 23 pages/cpu @(____ptrval____) s55896 r8192 d30120 u94208
  31. [ 0.000000] pcpu-alloc: s55896 r8192 d30120 u94208 alloc=23*4096
  32. [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5
  33. [ 0.000000] Detected VIPT I-cache on CPU0
  34. [ 0.000000] CPU features: enabling workaround for ARM erratum 845719
  35. [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI)
  36. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 515592
  37. [ 0.000000] Policy zone: DMA32
  38. [ 0.000000] Kernel command line: earlycon=uart8250,mmio32,0xff1a0000 rw panic=10 init=/sbin/init coherent_pool=1M ethaddr=1e:0e:99:52:8e:40 eth1addr= serial=15a3d3571288b28 cgroup_enable=cpuset cgroup_memory=1 cgroup_enable=memory swapaccount=1 root=LABEL=linux-root rootwait rootfstype=ext4
  39. [ 0.000000] Memory: 2006564K/2095104K available (18044K kernel code, 1896K rwdata, 7376K rodata, 1536K init, 480K bss, 72156K reserved, 16384K cma-reserved)
  40. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
  41. [ 0.000000] rcu: Preemptible hierarchical RCU implementation.
  42. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6.
  43. [ 0.000000] Tasks RCU enabled.
  44. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
  45. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6
  46. [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
  47. [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
  48. [ 0.000000] GICv3: Distributor has no Range Selector support
  49. [ 0.000000] GICv3: no VLPI support, no direct LPI support
  50. [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fef00000
  51. [ 0.000000] ITS [mem 0xfee20000-0xfee3ffff]
  52. [ 0.000000] ITS@0x00000000fee20000: allocated 65536 Devices @7e880000 (flat, esz 8, psz 64K, shr 0)
  53. [ 0.000000] ITS: using cache flushing for cmd queue
  54. [ 0.000000] GICv3: using LPI property table @0x000000007e840000
  55. [ 0.000000] GIC: using cache flushing for LPI property table
  56. [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x000000007e850000
  57. [ 0.000000] GICv3: GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@1[1] /cpus/cpu@2[2] /cpus/cpu@3[3] }
  58. [ 0.000000] GICv3: GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@100[4] /cpus/cpu@101[5] }
  59. [ 0.000000] rockchip_mmc_get_phase: invalid clk rate
  60. [ 0.000000] rockchip_mmc_get_phase: invalid clk rate
  61. [ 0.000000] rockchip_mmc_get_phase: invalid clk rate
  62. [ 0.000000] rockchip_mmc_get_phase: invalid clk rate
  63. [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
  64. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
  65. [ 0.000006] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
  66. [ 0.002922] Console: colour dummy device 80x25
  67. [ 0.003346] printk: console [tty0] enabled
  68. [ 0.003742] printk: bootconsole [uart8250] disabled
  69. [ 0.004315] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
  70. [ 0.004349] pid_max: default: 32768 minimum: 301
  71. [ 0.004485] LSM: Security Framework initializing
  72. [ 0.005550] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
  73. [ 0.006090] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
  74. [ 0.006159] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
  75. [ 0.006199] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
  76. [ 0.030991] ASID allocator initialised with 32768 entries
  77. [ 0.038988] rcu: Hierarchical SRCU implementation.
  78. [ 0.047118] Platform MSI: interrupt-controller@fee20000 domain created
  79. [ 0.047544] PCI/MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
  80. [ 0.051995] EFI services will not be available.
  81. [ 0.059898] smp: Bringing up secondary CPUs ...
  82. [ 0.092110] Detected VIPT I-cache on CPU1
  83. [ 0.092146] GICv3: CPU1: found redistributor 1 region 0:0x00000000fef20000
  84. [ 0.092162] GICv3: CPU1: using allocated LPI pending table @0x000000007e860000
  85. [ 0.092208] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
  86. [ 0.124191] Detected VIPT I-cache on CPU2
  87. [ 0.124219] GICv3: CPU2: found redistributor 2 region 0:0x00000000fef40000
  88. [ 0.124231] GICv3: CPU2: using allocated LPI pending table @0x000000007e870000
  89. [ 0.124262] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
  90. [ 0.156289] Detected VIPT I-cache on CPU3
  91. [ 0.156316] GICv3: CPU3: found redistributor 3 region 0:0x00000000fef60000
  92. [ 0.156328] GICv3: CPU3: using allocated LPI pending table @0x000000007e900000
  93. [ 0.156357] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
  94. [ 0.190978] CPU features: enabling workaround for EL2 vector hardening
  95. [ 0.191490] Detected PIPT I-cache on CPU4
  96. [ 0.192678] GICv3: CPU4: found redistributor 100 region 0:0x00000000fef80000
  97. [ 0.193129] GICv3: CPU4: using allocated LPI pending table @0x000000007e910000
  98. [ 0.194311] CPU4: Booted secondary processor 0x0000000100 [0x410fd082]
  99. [ 0.230563] Detected PIPT I-cache on CPU5
  100. [ 0.231713] GICv3: CPU5: found redistributor 101 region 0:0x00000000fefa0000
  101. [ 0.232133] GICv3: CPU5: using allocated LPI pending table @0x000000007e920000
  102. [ 0.233199] CPU5: Booted secondary processor 0x0000000101 [0x410fd082]
  103. [ 0.236965] smp: Brought up 1 node, 6 CPUs
  104. [ 0.237361] SMP: Total of 6 processors activated.
  105. [ 0.237396] CPU features: detected: GIC system register CPU interface
  106. [ 0.237423] CPU features: detected: 32-bit EL0 Support
  107. [ 0.237456] CPU features: detected: CRC32 instructions
  108. [ 0.259594] CPU: All CPU(s) started at EL2
  109. [ 0.260083] alternatives: patching kernel code
  110. [ 0.263902] devtmpfs: initialized
  111. [ 0.281733] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  112. [ 0.281987] futex hash table entries: 2048 (order: 5, 131072 bytes)
  113. [ 0.283836] xor: measuring software checksum speed
  114. [ 0.323035] 8regs : 1152.000 MB/sec
  115. [ 0.363242] 8regs_prefetch: 1026.000 MB/sec
  116. [ 0.403481] 32regs : 1415.000 MB/sec
  117. [ 0.443705] 32regs_prefetch: 1190.000 MB/sec
  118. [ 0.443728] xor: using function: 32regs (1415.000 MB/sec)
  119. [ 0.443792] pinctrl core: initialized pinctrl subsystem
  120. [ 0.447602] DMI not present or invalid.
  121. [ 0.448948] NET: Registered protocol family 16
  122. [ 0.453689] audit: initializing netlink subsys (disabled)
  123. [ 0.456031] audit: type=2000 audit(0.444:1): state=initialized audit_enabled=0 res=1
  124. [ 0.466341] cpuidle: using governor menu
  125. [ 0.468124] vdso: 2 pages (1 code @ (____ptrval____), 1 data @ (____ptrval____))
  126. [ 0.468203] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  127. [ 0.479529] DMA: preallocated 1024 KiB pool for atomic allocations
  128. [ 0.483294] Serial: AMBA PL011 UART driver
  129. [ 0.606253] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
  130. [ 0.609625] cryptd: max_cpu_qlen set to 1000
  131. [ 0.677705] raid6: int64x1 gen() 218 MB/s
  132. [ 0.746472] raid6: int64x1 xor() 218 MB/s
  133. [ 0.815504] raid6: int64x2 gen() 8 MB/s
  134. [ 0.886138] raid6: int64x2 xor() 8 MB/s
  135. [ 0.958777] raid6: int64x4 gen() 13 MB/s
  136. [ 1.027682] raid6: int64x4 xor() 379 MB/s
  137. [ 1.096108] raid6: int64x8 gen() 486 MB/s
  138. [ 1.164464] raid6: int64x8 xor() 375 MB/s
  139. [ 1.232934] raid6: neonx1 gen() 363 MB/s
  140. [ 1.301300] raid6: neonx1 xor() 425 MB/s
  141. [ 1.369790] raid6: neonx2 gen() 583 MB/s
  142. [ 1.438128] raid6: neonx2 xor() 602 MB/s
  143. [ 1.506520] raid6: neonx4 gen() 753 MB/s
  144. [ 1.574971] raid6: neonx4 xor() 721 MB/s
  145. [ 1.643362] raid6: neonx8 gen() 819 MB/s
  146. [ 1.711807] raid6: neonx8 xor() 767 MB/s
  147. [ 1.711826] raid6: using algorithm neonx8 gen() 819 MB/s
  148. [ 1.711846] raid6: .... xor() 767 MB/s, rmw enabled
  149. [ 1.711870] raid6: using neon recovery algorithm
  150. [ 1.713931] ACPI: Interpreter disabled.
  151. [ 1.718366] vcc3v3_pcie: supplied by dc_12v
  152. [ 1.721942] vcc_sys: supplied by dc_12v
  153. [ 1.726579] vgaarb: loaded
  154. [ 1.727424] SCSI subsystem initialized
  155. [ 1.728379] libata version 3.00 loaded.
  156. [ 1.728944] usbcore: registered new interface driver usbfs
  157. [ 1.729092] usbcore: registered new interface driver hub
  158. [ 1.729474] usbcore: registered new device driver usb
  159. [ 1.732988] media: Linux media interface: v0.10
  160. [ 1.733261] videodev: Linux video capture interface: v2.00
  161. [ 1.733512] pps_core: LinuxPPS API ver. 1 registered
  162. [ 1.733552] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  163. [ 1.733616] PTP clock support registered
  164. [ 1.736458] Advanced Linux Sound Architecture Driver Initialized.
  165. [ 1.738344] Bluetooth: Core ver 2.22
  166. [ 1.738677] NET: Registered protocol family 31
  167. [ 1.738697] Bluetooth: HCI device and connection manager initialized
  168. [ 1.738727] Bluetooth: HCI socket layer initialized
  169. [ 1.738751] Bluetooth: L2CAP socket layer initialized
  170. [ 1.738794] Bluetooth: SCO socket layer initialized
  171. [ 1.738842] NetLabel: Initializing
  172. [ 1.738862] NetLabel: domain hash size = 128
  173. [ 1.738879] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
  174. [ 1.739010] NetLabel: unlabeled traffic allowed by default
  175. [ 1.742588] clocksource: Switched to clocksource arch_sys_counter
  176. [ 1.743341] VFS: Disk quotas dquot_6.6.0
  177. [ 1.743471] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  178. [ 1.743820] pnp: PnP ACPI: disabled
  179. [ 1.760493] NET: Registered protocol family 2
  180. [ 1.763574] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes)
  181. [ 1.764274] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
  182. [ 1.764584] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
  183. [ 1.764977] TCP: Hash tables configured (established 16384 bind 16384)
  184. [ 1.765370] UDP hash table entries: 1024 (order: 3, 32768 bytes)
  185. [ 1.765487] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
  186. [ 1.765805] NET: Registered protocol family 1
  187. [ 1.769461] RPC: Registered named UNIX socket transport module.
  188. [ 1.769488] RPC: Registered udp transport module.
  189. [ 1.769506] RPC: Registered tcp transport module.
  190. [ 1.769524] RPC: Registered tcp NFSv4.1 backchannel transport module.
  191. [ 1.771230] PCI: CLS 0 bytes, default 64
  192. [ 1.772200] Trying to unpack rootfs image as initramfs...
  193. [ 2.340526] Freeing initrd memory: 7028K
  194. [ 2.350157] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
  195. [ 2.353416] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
  196. [ 2.354819] kvm [1]: 8-bit VMID
  197. [ 2.354860] kvm [1]: IPA Size Limit: 40bits
  198. [ 2.356567] kvm [1]: vgic-v2@fff20000
  199. [ 2.356948] kvm [1]: GIC system register CPU interface enabled
  200. [ 2.360533] kvm [1]: vgic interrupt IRQ10
  201. [ 2.363146] kvm [1]: Hyp mode initialized successfully
  202. [ 2.737479] workingset: timestamp_bits=44 max_order=19 bucket_order=0
  203. [ 2.756096] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  204. [ 2.758341] NFS: Registering the id_resolver key type
  205. [ 2.758534] Key type id_resolver registered
  206. [ 2.758553] Key type id_legacy registered
  207. [ 2.758592] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  208. [ 2.758615] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
  209. [ 2.760550] fuse init (API version 7.28)
  210. [ 2.761515] 9p: Installing v9fs 9p2000 file system support
  211. [ 4.090740] NET: Registered protocol family 38
  212. [ 4.108693] Key type asymmetric registered
  213. [ 4.108780] Asymmetric key parser 'x509' registered
  214. [ 4.109019] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
  215. [ 4.111092] io scheduler noop registered
  216. [ 4.111505] io scheduler cfq registered (default)
  217. [ 4.111533] io scheduler mq-deadline registered
  218. [ 4.111552] io scheduler kyber registered
  219. [ 4.121255] vcc5v0_host: supplied by vcc_sys
  220. [ 4.121624] phy phy-ff770000.syscon:usb2-phy@e450.1: Linked as a consumer to regulator.6
  221. [ 4.125647] phy phy-ff770000.syscon:usb2-phy@e460.3: Linked as a consumer to regulator.6
  222. [ 4.187871] dma-pl330 ff6d0000.dma-controller: Loaded driver for PL330 DMAC-241330
  223. [ 4.187972] dma-pl330 ff6d0000.dma-controller: DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12
  224. [ 4.195207] dma-pl330 ff6e0000.dma-controller: Loaded driver for PL330 DMAC-241330
  225. [ 4.195329] dma-pl330 ff6e0000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
  226. [ 4.204757] pwm-regulator: supplied by vcc_sys
  227. [ 4.205387] vcc3v3_sys: supplied by vcc_sys
  228. [ 4.205490] vcc5v0_typec: supplied by vcc_sys
  229. [ 4.215755] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  230. [ 4.220088] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 37, base_baud = 1500000) is a 16550A
  231. [ 4.221562] ff1a0000.serial: ttyS2 at MMIO 0xff1a0000 (irq = 38, base_baud = 1500000) is a 16550A
  232. [ 4.337474] printk: console [ttyS2] enabled
  233. [ 4.341171] SuperH (H)SCI(F) driver initialized
  234. [ 4.342975] msm_serial: driver initialized
  235. [ 4.365758] cacheinfo: Unable to detect cache hierarchy for CPU 0
  236. [ 4.388391] brd: module loaded
  237. [ 4.406553] loop: module loaded
  238. [ 4.451928] rockchip-spi ff1d0000.spi: Failed to request TX DMA channel
  239. [ 4.452600] rockchip-spi ff1d0000.spi: Failed to request RX DMA channel
  240. [ 4.456940] m25p80 spi0.0: gd25q128 (16384 Kbytes)
  241. [ 4.470605] 3 fixed-partitions partitions found on MTD device spi0.0
  242. [ 4.471229] Creating 3 MTD partitions on "spi0.0":
  243. [ 4.471686] 0x000000000000-0x0000003f8000 : "loader"
  244. [ 4.475122] 0x0000003f8000-0x000000400000 : "env"
  245. [ 4.477546] 0x0000007c0000-0x000000800000 : "vendor"
  246. [ 4.485688] libphy: Fixed MDIO Bus: probed
  247. [ 4.488602] tun: Universal TUN/TAP device driver, 1.6
  248. [ 4.493768] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
  249. [ 4.494434] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
  250. [ 4.495088] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
  251. [ 4.495720] igb: Copyright (c) 2007-2014 Intel Corporation.
  252. [ 4.496293] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k
  253. [ 4.497007] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
  254. [ 4.498897] sky2: driver version 1.30
  255. [ 4.502844] rk_gmac-dwmac fe300000.ethernet: PTP uses main clock
  256. [ 4.503634] rk_gmac-dwmac fe300000.ethernet: Linked as a consumer to regulator.4
  257. [ 4.504311] rk_gmac-dwmac fe300000.ethernet: clock input or output? (input).
  258. [ 4.504954] rk_gmac-dwmac fe300000.ethernet: TX delay(0x28).
  259. [ 4.505470] rk_gmac-dwmac fe300000.ethernet: RX delay(0x20).
  260. [ 4.506135] rk_gmac-dwmac fe300000.ethernet: integrated PHY? (no).
  261. [ 4.506767] rk_gmac-dwmac fe300000.ethernet: cannot get clock clk_mac_speed
  262. [ 4.507396] rk_gmac-dwmac fe300000.ethernet: clock input from PHY
  263. [ 4.512983] rk_gmac-dwmac fe300000.ethernet: init for RGMII
  264. [ 4.515185] rk_gmac-dwmac fe300000.ethernet: User ID: 0x10, Synopsys ID: 0x35
  265. [ 4.515835] rk_gmac-dwmac fe300000.ethernet: DWMAC1000
  266. [ 4.516313] rk_gmac-dwmac fe300000.ethernet: DMA HW capability register supported
  267. [ 4.516990] rk_gmac-dwmac fe300000.ethernet: RX Checksum Offload Engine supported
  268. [ 4.517667] rk_gmac-dwmac fe300000.ethernet: COE Type 2
  269. [ 4.518189] rk_gmac-dwmac fe300000.ethernet: TX Checksum insertion supported
  270. [ 4.518826] rk_gmac-dwmac fe300000.ethernet: Wake-Up On Lan supported
  271. [ 4.519453] rk_gmac-dwmac fe300000.ethernet: Normal descriptors
  272. [ 4.519995] rk_gmac-dwmac fe300000.ethernet: Ring mode enabled
  273. [ 4.520525] rk_gmac-dwmac fe300000.ethernet: Enable RX Mitigation via HW Watchdog Timer
  274. [ 4.773549] libphy: stmmac: probed
  275. [ 4.773947] RTL8211F Gigabit Ethernet stmmac-0:00: attached PHY driver [RTL8211F Gigabit Ethernet] (mii_bus:phy_addr=stmmac-0:00, irq=POLL)
  276. [ 4.775072] RTL8211F Gigabit Ethernet stmmac-0:01: attached PHY driver [RTL8211F Gigabit Ethernet] (mii_bus:phy_addr=stmmac-0:01, irq=POLL)
  277. [ 4.780034] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
  278. [ 4.780876] usbcore: registered new interface driver pegasus
  279. [ 4.781467] usbcore: registered new interface driver rtl8150
  280. [ 4.782260] usbcore: registered new interface driver r8152
  281. [ 4.782859] usbcore: registered new interface driver asix
  282. [ 4.783416] usbcore: registered new interface driver ax88179_178a
  283. [ 4.784022] usbcore: registered new interface driver cdc_ether
  284. [ 4.784614] usbcore: registered new interface driver dm9601
  285. [ 4.785189] usbcore: registered new interface driver CoreChips
  286. [ 4.785786] usbcore: registered new interface driver smsc75xx
  287. [ 4.786442] usbcore: registered new interface driver smsc95xx
  288. [ 4.787023] usbcore: registered new interface driver net1080
  289. [ 4.787608] usbcore: registered new interface driver plusb
  290. [ 4.788170] usbcore: registered new interface driver cdc_subset
  291. [ 4.788760] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
  292. [ 4.789537] usbcore: registered new interface driver cdc_ncm
  293. [ 4.790725] VFIO - User Level meta-driver version: 0.3
  294. [ 4.795212] dwc3 fe800000.dwc3: Failed to get clk 'ref': -2
  295. [ 4.808362] OF: graph: no port node found in /syscon@ff770000/usb2-phy@e450/otg-port
  296. [ 4.813863] dwc3 fe900000.dwc3: Failed to get clk 'ref': -2
  297. [ 4.826763] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  298. [ 4.827416] ehci-pci: EHCI PCI platform driver
  299. [ 4.827960] ehci-platform: EHCI generic platform driver
  300. [ 4.830893] ehci-platform fe380000.usb: EHCI Host Controller
  301. [ 4.831436] ehci-platform fe380000.usb: new USB bus registered, assigned bus number 1
  302. [ 4.834864] ehci-platform fe380000.usb: irq 30, io mem 0xfe380000
  303. [ 4.853939] ehci-platform fe380000.usb: USB 2.0 started, EHCI 1.00
  304. [ 4.856112] hub 1-0:1.0: USB hub found
  305. [ 4.856504] hub 1-0:1.0: 1 port detected
  306. [ 4.859873] ehci-platform fe3c0000.usb: EHCI Host Controller
  307. [ 4.860422] ehci-platform fe3c0000.usb: new USB bus registered, assigned bus number 2
  308. [ 4.864355] ehci-platform fe3c0000.usb: irq 32, io mem 0xfe3c0000
  309. [ 4.881960] ehci-platform fe3c0000.usb: USB 2.0 started, EHCI 1.00
  310. [ 4.883867] hub 2-0:1.0: USB hub found
  311. [ 4.884252] hub 2-0:1.0: 1 port detected
  312. [ 4.885700] ehci-orion: EHCI orion driver
  313. [ 4.886583] ehci-exynos: EHCI EXYNOS driver
  314. [ 4.887218] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  315. [ 4.887896] ohci-pci: OHCI PCI platform driver
  316. [ 4.888436] ohci-platform: OHCI generic platform driver
  317. [ 4.889339] ohci-platform fe3a0000.usb: Generic Platform OHCI controller
  318. [ 4.890076] ohci-platform fe3a0000.usb: new USB bus registered, assigned bus number 3
  319. [ 4.892673] ohci-platform fe3a0000.usb: irq 31, io mem 0xfe3a0000
  320. [ 4.959396] hub 3-0:1.0: USB hub found
  321. [ 4.959784] hub 3-0:1.0: 1 port detected
  322. [ 4.961000] ohci-platform fe3e0000.usb: Generic Platform OHCI controller
  323. [ 4.961629] ohci-platform fe3e0000.usb: new USB bus registered, assigned bus number 4
  324. [ 4.963663] ohci-platform fe3e0000.usb: irq 33, io mem 0xfe3e0000
  325. [ 5.027076] hub 4-0:1.0: USB hub found
  326. [ 5.027459] hub 4-0:1.0: 1 port detected
  327. [ 5.028880] ohci-exynos: OHCI EXYNOS driver
  328. [ 5.031284] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
  329. [ 5.031823] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 5
  330. [ 5.036161] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002010010
  331. [ 5.037089] xhci-hcd xhci-hcd.0.auto: irq 219, io mem 0xfe800000
  332. [ 5.039517] hub 5-0:1.0: USB hub found
  333. [ 5.039915] hub 5-0:1.0: 1 port detected
  334. [ 5.040833] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
  335. [ 5.041349] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 6
  336. [ 5.042180] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
  337. [ 5.042859] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
  338. [ 5.044600] hub 6-0:1.0: USB hub found
  339. [ 5.045166] hub 6-0:1.0: 1 port detected
  340. [ 5.046383] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
  341. [ 5.046912] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 7
  342. [ 5.050164] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002010010
  343. [ 5.051126] xhci-hcd xhci-hcd.1.auto: irq 220, io mem 0xfe900000
  344. [ 5.053444] hub 7-0:1.0: USB hub found
  345. [ 5.053837] hub 7-0:1.0: 1 port detected
  346. [ 5.054883] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
  347. [ 5.055402] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 8
  348. [ 5.056110] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
  349. [ 5.056832] usb usb8: We don't know the algorithms for LPM for this host, disabling LPM.
  350. [ 5.058672] hub 8-0:1.0: USB hub found
  351. [ 5.059092] hub 8-0:1.0: 1 port detected
  352. [ 5.060893] usbcore: registered new interface driver usb-storage
  353. [ 5.072590] i2c /dev entries driver
  354. [ 5.081850] rk808 0-001b: chip id: 0x0
  355. [ 5.087989] rk808-regulator rk808-regulator: there is no dvs0 gpio
  356. [ 5.088638] rk808-regulator rk808-regulator: there is no dvs1 gpio
  357. [ 5.089284] DCDC_REG1: supplied by vcc_sys
  358. [ 5.091052] DCDC_REG2: supplied by vcc_sys
  359. [ 5.092137] DCDC_REG3: supplied by vcc_sys
  360. [ 5.092854] DCDC_REG4: supplied by vcc_sys
  361. [ 5.093923] LDO_REG1: supplied by vcc_sys
  362. [ 5.095623] LDO_REG2: supplied by vcc_sys
  363. [ 5.096197] vcc2v8_dvp: Bringing 3000000uV into 2800000-2800000uV
  364. [ 5.097792] LDO_REG3: supplied by vcc_sys
  365. [ 5.099366] LDO_REG4: supplied by vcc_sys
  366. [ 5.099936] vcc_sdio: Bringing 3300000uV into 3000000-3000000uV
  367. [ 5.101741] LDO_REG5: supplied by vcc_sys
  368. [ 5.103432] LDO_REG6: supplied by vcc_sys
  369. [ 5.104957] LDO_REG7: supplied by vcc_sys
  370. [ 5.106363] LDO_REG8: supplied by vcc_sys
  371. [ 5.107914] SWITCH_REG1: supplied by vcc3v3_sys
  372. [ 5.108657] SWITCH_REG2: supplied by vcc3v3_sys
  373. [ 5.113991] rk808-rtc rk808-rtc: registered as rtc0
  374. [ 5.115993] fan53555-regulator 0-0040: FAN53555 Option[8] Rev[1] Detected!
  375. [ 5.116668] fan53555-reg: supplied by vcc_sys
  376. [ 5.118518] vcc1v8_s3: supplied by vcc_1v8
  377. [ 5.119914] fan53555-regulator 0-0041: FAN53555 Option[8] Rev[1] Detected!
  378. [ 5.120564] fan53555-reg: supplied by vcc_sys
  379. [ 5.129506] rockchip-rga ff680000.rga: HW Version: 0x03.02
  380. [ 5.134868] rockchip-rga ff680000.rga: Registered rockchip-rga as /dev/video0
  381. [ 5.137377] rockchip-iodomain ff320000.syscon:io-domains: Linked as a consumer to regulator.21
  382. [ 5.139015] rockchip-iodomain ff770000.syscon:io-domains: Linked as a consumer to regulator.14
  383. [ 5.139899] rockchip-iodomain ff770000.syscon:io-domains: Linked as a consumer to regulator.20
  384. [ 5.140808] rockchip-iodomain ff770000.syscon:io-domains: Linked as a consumer to regulator.17
  385. [ 5.141676] rockchip-iodomain ff770000.syscon:io-domains: Linked as a consumer to regulator.21
  386. [ 5.155305] Bluetooth: HCI UART driver ver 2.3
  387. [ 5.157041] cpu cpu0: Linked as a consumer to regulator.11
  388. [ 5.157693] cpu cpu0: Dropping the link to regulator.11
  389. [ 5.158631] cpu cpu0: Linked as a consumer to regulator.11
  390. [ 5.160927] cpu cpu4: Linked as a consumer to regulator.24
  391. [ 5.162248] cpufreq: cpufreq_online: CPU4: Running at unlisted freq: 12000 KHz
  392. [ 5.163497] cpufreq: cpufreq_online: CPU4: Unlisted initial frequency changed to: 408000 KHz
  393. [ 5.166016] sdhci: Secure Digital Host Controller Interface driver
  394. [ 5.166576] sdhci: Copyright(c) Pierre Ossman
  395. [ 5.167264] Synopsys Designware Multimedia Card Interface Driver
  396. [ 5.168904] dwmmc_rockchip fe320000.dwmmc: IDMAC supports 32-bit address mode.
  397. [ 5.169791] dwmmc_rockchip fe320000.dwmmc: Using internal DMA controller.
  398. [ 5.170431] dwmmc_rockchip fe320000.dwmmc: Version ID is 270a
  399. [ 5.170993] dwmmc_rockchip fe320000.dwmmc: DW MMC controller at irq 28,32 bit host data width,256 deep fifo
  400. [ 5.171962] dwmmc_rockchip fe320000.dwmmc: Linked as a consumer to regulator.17
  401. [ 5.172661] dwmmc_rockchip fe320000.dwmmc: Got CD GPIO
  402. [ 5.173284] vcc_sdio: unsupportable voltage range: 3300000-3000000uV
  403. [ 5.186322] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
  404. [ 5.198038] random: fast init done
  405. [ 5.202535] sdhci-pltfm: SDHCI platform and OF driver helper
  406. [ 5.205287] mmc1: CQHCI version 5.10
  407. [ 5.229686] mmc1: SDHCI controller on fe330000.sdhci [fe330000.sdhci] using ADMA
  408. [ 5.235556] ledtrig-cpu: registered to indicate activity on CPUs
  409. [ 5.238852] usbcore: registered new interface driver usbhid
  410. [ 5.239433] usbhid: USB HID core driver
  411. [ 5.242848] rockchip-saradc ff100000.saradc: Linked as a consumer to regulator.2
  412. [ 5.250693] xt_time: kernel timezone is -0000
  413. [ 5.251121] IPVS: Registered protocols (TCP, UDP, SCTP, AH, ESP)
  414. [ 5.251891] IPVS: Connection hash table configured (size=4096, memory=64Kbytes)
  415. [ 5.252698] IPVS: ipvs loaded.
  416. [ 5.252976] IPVS: [rr] scheduler registered.
  417. [ 5.253355] IPVS: [wrr] scheduler registered.
  418. [ 5.253743] IPVS: [lc] scheduler registered.
  419. [ 5.254145] IPVS: [wlc] scheduler registered.
  420. [ 5.254532] IPVS: [fo] scheduler registered.
  421. [ 5.254910] IPVS: [ovf] scheduler registered.
  422. [ 5.255304] IPVS: [lblc] scheduler registered.
  423. [ 5.255703] IPVS: [lblcr] scheduler registered.
  424. [ 5.256104] IPVS: [dh] scheduler registered.
  425. [ 5.256482] IPVS: [sh] scheduler registered.
  426. [ 5.256860] IPVS: [sed] scheduler registered.
  427. [ 5.257246] IPVS: [nq] scheduler registered.
  428. [ 5.257882] ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully
  429. [ 5.258515] Initializing XFRM netlink socket
  430. [ 5.259361] NET: Registered protocol family 10
  431. [ 5.260516] Segment Routing with IPv6
  432. [ 5.261082] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
  433. [ 5.262034] NET: Registered protocol family 17
  434. [ 5.262474] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
  435. [ 5.263700] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  436. [ 5.264228] Bluetooth: HIDP socket layer initialized
  437. [ 5.264701] 8021q: 802.1Q VLAN Support v1.8
  438. [ 5.265176] 9pnet: Installing 9P2000 support
  439. [ 5.265607] Key type dns_resolver registered
  440. [ 5.266987] registered taskstats version 1
  441. [ 5.268179] Btrfs loaded, crc32c=crc32c-generic
  442. [ 5.282618] mmc_host mmc0: Bus speed (slot 0) = 148500000Hz (slot req 150000000Hz, actual 148500000HZ div = 0)
  443. [ 5.289901] input: gpio-keys as /devices/platform/gpio-keys/input/input0
  444. [ 5.294584] rk808-rtc rk808-rtc: setting system clock to 2019-01-20 14:19:53 UTC (1547993993)
  445. [ 5.295355] of_cfs_init
  446. [ 5.295603] of_cfs_init: OK
  447. [ 5.296042] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
  448. [ 5.296800] cfg80211: failed to load regulatory.db
  449. [ 5.297689] vcc3v3_pcie: disabling
  450. [ 5.298025] ALSA device list:
  451. [ 5.298290] No soundcards found.
  452. [ 5.298815] ttyS2 - failed to request DMA
  453. [ 5.299966] Freeing unused kernel memory: 1536K
  454. [ 5.334267] Run /init as init process
  455. [ 5.424260] dwmmc_rockchip fe320000.dwmmc: Successfully tuned phase to 228
  456. [ 5.424948] mmc0: new ultra high speed SDR104 SDHC card at address aaaa
  457. [ 5.427719] mmcblk0: mmc0:aaaa SC32G 29.7 GiB
  458. [ 5.436491] GPT:Primary header thinks Alt. header is not at the end of the disk.
  459. [ 5.437168] GPT:60620799 != 62333951
  460. [ 5.437488] GPT:Alternate GPT header not at the end of the disk.
  461. [ 5.438037] GPT:60620799 != 62333951
  462. [ 5.438359] GPT: Use GNU Parted to correct GPT errors.
  463. [ 5.438854] mmcblk0: p1 p2 p3 p4 p5 p6 p7
  464. [ 5.735857] iommu: Adding device ff8f0000.vop to group 0
  465. [ 5.736455] rockchip-vop ff8f0000.vop: Linked as a consumer to ff8f3f00.iommu
  466. [ 5.738068] iommu: Adding device ff900000.vop to group 1
  467. [ 5.738680] rockchip-vop ff900000.vop: Linked as a consumer to ff903f00.iommu
  468. [ 5.741950] rockchip-drm display-subsystem: Linked as a consumer to ff8f0000.vop
  469. [ 5.742616] rockchip-drm display-subsystem: Linked as a consumer to ff900000.vop
  470. [ 5.743545] rockchip-drm display-subsystem: Linked as a consumer to ff940000.hdmi
  471. [ 5.746749] rockchip-drm display-subsystem: bound ff8f0000.vop (ops vop_component_ops [rockchipdrm])
  472. [ 5.749848] rockchip-drm display-subsystem: bound ff900000.vop (ops vop_component_ops [rockchipdrm])
  473. [ 5.750788] dwhdmi-rockchip ff940000.hdmi: Detected HDMI TX controller v2.11a with HDCP (DWC HDMI 2.0 TX PHY)
  474. [ 5.753595] rockchip-drm display-subsystem: bound ff940000.hdmi (ops dw_hdmi_rockchip_ops [rockchipdrm])
  475. [ 5.754472] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
  476. [ 5.755052] [drm] No driver support for vblank timestamp query.
  477. [ 5.755599] [drm] Cannot find any crtc or sizes
  478. [ 5.756269] [drm] Initialized rockchip 1.0.0 20140818 for display-subsystem on minor 0
  479. [ 6.774201] [drm] Cannot find any crtc or sizes
  480. [ 7.243164] async_tx: api initialized (async)
  481. [ 7.661180] EXT4-fs (mmcblk0p7): mounted filesystem with writeback data mode. Opts: (null)
  482. [ 8.054233] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
  483. [ 8.056883] systemd[1]: Detected architecture arm64.
  484. [ 8.085139] systemd[1]: Set hostname to <rockpro64v_2_1>.
  485. [ 8.358073] systemd[1]: File /lib/systemd/system/systemd-udevd.service:34 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling.
  486. [ 8.359578] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.)
  487. [ 8.537470] random: systemd: uninitialized urandom read (16 bytes read)
  488. [ 8.538497] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
  489. [ 8.550382] random: systemd: uninitialized urandom read (16 bytes read)
  490. [ 8.551107] systemd[1]: Reached target Swap.
  491. [ 8.562441] random: systemd: uninitialized urandom read (16 bytes read)
  492. [ 8.564145] systemd[1]: Created slice User and Session Slice.
  493. [ 8.574664] systemd[1]: Started ntp-systemd-netif.path.
  494. [ 8.586966] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
  495. [ 9.263287] systemd-journald[2480]: Received request to flush runtime journal from PID 1
  496. [ 9.569070] random: crng init done
  497. [ 9.569080] random: 7 urandom warning(s) missed due to ratelimiting
  498. [ 9.747216] rockchip-pcie f8000000.pcie: no vpcie12v regulator found
  499. [ 9.747256] rockchip-pcie f8000000.pcie: Linked as a consumer to regulator.3
  500. [ 9.747266] rockchip-pcie f8000000.pcie: no vpcie1v8 regulator found
  501. [ 9.747275] rockchip-pcie f8000000.pcie: no vpcie0v9 regulator found
  502. [ 9.778914] rockchip-pinctrl pinctrl: pin gpio4-0 already requested by ff880000.i2s; cannot claim for 1-0010
  503. [ 9.779959] rockchip-pinctrl pinctrl: pin-128 (1-0010) status -22
  504. [ 9.780519] rockchip-pinctrl pinctrl: could not request pin 128 (gpio4-0) from group i2s-8ch-mclk on device rockchip-pinctrl
  505. [ 9.781520] es8316 1-0010: Error applying setting, reverse things back
  506. [ 9.782530] es8316: probe of 1-0010 failed with error -22
  507. [ 9.852619] RTL8211F Gigabit Ethernet stmmac-0:00: attached PHY driver [RTL8211F Gigabit Ethernet] (mii_bus:phy_addr=stmmac-0:00, irq=POLL)
  508. [ 9.854952] rk_gmac-dwmac fe300000.ethernet eth0: No Safety Features support found
  509. [ 9.854967] rk_gmac-dwmac fe300000.ethernet eth0: PTP not supported by HW
  510. [ 9.855354] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  511. [ 10.033814] FAT-fs (mmcblk0p6): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
  512. [ 10.338536] rockchip-pcie f8000000.pcie: host bridge /pcie@f8000000 ranges:
  513. [ 10.338565] rockchip-pcie f8000000.pcie: MEM 0xfa000000..0xfbdfffff -> 0xfa000000
  514. [ 10.338578] rockchip-pcie f8000000.pcie: IO 0xfbe00000..0xfbefffff -> 0xfbe00000
  515. [ 10.338905] rockchip-pcie f8000000.pcie: PCI host bridge to bus 0000:00
  516. [ 10.338916] pci_bus 0000:00: root bus resource [bus 00-1f]
  517. [ 10.338924] pci_bus 0000:00: root bus resource [mem 0xfa000000-0xfbdfffff]
  518. [ 10.338933] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] (bus address [0xfbe00000-0xfbefffff])
  519. [ 10.338969] pci 0000:00:00.0: [1d87:0100] type 01 class 0x060400
  520. [ 10.339070] pci 0000:00:00.0: supports D1
  521. [ 10.339076] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
  522. [ 10.343855] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
  523. [ 10.344105] pci 0000:01:00.0: [1b21:0612] type 00 class 0x010601
  524. [ 10.344202] pci 0000:01:00.0: reg 0x10: initial BAR value 0x00000000 invalid
  525. [ 10.344210] pci 0000:01:00.0: reg 0x10: [io size 0x0008]
  526. [ 10.344243] pci 0000:01:00.0: reg 0x14: initial BAR value 0x00000000 invalid
  527. [ 10.344249] pci 0000:01:00.0: reg 0x14: [io size 0x0004]
  528. [ 10.344281] pci 0000:01:00.0: reg 0x18: initial BAR value 0x00000000 invalid
  529. [ 10.344293] pci 0000:01:00.0: reg 0x18: [io size 0x0008]
  530. [ 10.344325] pci 0000:01:00.0: reg 0x1c: initial BAR value 0x00000000 invalid
  531. [ 10.344331] pci 0000:01:00.0: reg 0x1c: [io size 0x0004]
  532. [ 10.344364] pci 0000:01:00.0: reg 0x20: initial BAR value 0x00000000 invalid
  533. [ 10.344370] pci 0000:01:00.0: reg 0x20: [io size 0x0020]
  534. [ 10.344403] pci 0000:01:00.0: reg 0x24: [mem 0x00000000-0x000001ff]
  535. [ 10.344437] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
  536. [ 10.344475] pci 0000:01:00.0: Max Payload Size set to 256 (was 128, max 512)
  537. [ 10.344780] pci 0000:01:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x1 link at 0000:00:00.0 (capable of 4.000 Gb/s with 5 GT/s x1 link)
  538. [ 10.349573] pci_bus 0000:01: busn_res: [bus 01-1f] end is updated to 01
  539. [ 10.349624] pci 0000:00:00.0: BAR 14: assigned [mem 0xfa000000-0xfa0fffff]
  540. [ 10.349638] pci 0000:01:00.0: BAR 6: assigned [mem 0xfa000000-0xfa00ffff pref]
  541. [ 10.349647] pci 0000:01:00.0: BAR 5: assigned [mem 0xfa010000-0xfa0101ff]
  542. [ 10.349667] pci 0000:01:00.0: BAR 4: no space for [io size 0x0020]
  543. [ 10.349674] pci 0000:01:00.0: BAR 4: failed to assign [io size 0x0020]
  544. [ 10.349680] pci 0000:01:00.0: BAR 0: no space for [io size 0x0008]
  545. [ 10.349687] pci 0000:01:00.0: BAR 0: failed to assign [io size 0x0008]
  546. [ 10.349693] pci 0000:01:00.0: BAR 2: no space for [io size 0x0008]
  547. [ 10.349700] pci 0000:01:00.0: BAR 2: failed to assign [io size 0x0008]
  548. [ 10.349706] pci 0000:01:00.0: BAR 1: no space for [io size 0x0004]
  549. [ 10.349712] pci 0000:01:00.0: BAR 1: failed to assign [io size 0x0004]
  550. [ 10.349719] pci 0000:01:00.0: BAR 3: no space for [io size 0x0004]
  551. [ 10.349725] pci 0000:01:00.0: BAR 3: failed to assign [io size 0x0004]
  552. [ 10.349734] pci 0000:00:00.0: PCI bridge to [bus 01]
  553. [ 10.349744] pci 0000:00:00.0: bridge window [mem 0xfa000000-0xfa0fffff]
  554. [ 10.350178] ahci 0000:01:00.0: version 3.0
  555. [ 10.350202] pci 0000:00:00.0: enabling device (0000 -> 0002)
  556. [ 10.350222] ahci 0000:01:00.0: enabling device (0000 -> 0002)
  557. [ 10.350474] ahci 0000:01:00.0: SSS flag set, parallel bus scan disabled
  558. [ 10.350538] ahci 0000:01:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
  559. [ 10.350545] ahci 0000:01:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs
  560. [ 10.353161] scsi host0: ahci
  561. [ 10.353664] scsi host1: ahci
  562. [ 10.353911] ata1: SATA max UDMA/133 abar m512@0xfa010000 port 0xfa010100 irq 231
  563. [ 10.353919] ata2: SATA max UDMA/133 abar m512@0xfa010000 port 0xfa010180 irq 231
  564. [ 10.833918] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
  565. [ 10.871195] ata1.00: ATA-10: ST2000LM015-2E8174, SDM1, max UDMA/133
  566. [ 10.871204] ata1.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA
  567. [ 10.874760] rk_gmac-dwmac fe300000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
  568. [ 10.874795] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  569. [ 10.920869] ata1.00: configured for UDMA/133
  570. [ 10.921305] scsi 0:0:0:0: Direct-Access ATA ST2000LM015-2E81 SDM1 PQ: 0 ANSI: 5
  571. [ 10.922718] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
  572. [ 10.922723] sd 0:0:0:0: [sda] 4096-byte physical blocks
  573. [ 10.922755] sd 0:0:0:0: [sda] Write Protect is off
  574. [ 10.922758] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
  575. [ 10.922790] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  576. [ 10.996950] sda: sda1
  577. [ 10.997831] sd 0:0:0:0: [sda] Attached SCSI disk
  578. [ 11.397908] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
  579. [ 11.435449] ata2.00: ATA-10: ST2000LM015-2E8174, SDM1, max UDMA/133
  580. [ 11.435457] ata2.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA
  581. [ 11.485290] ata2.00: configured for UDMA/133
  582. [ 11.485848] scsi 1:0:0:0: Direct-Access ATA ST2000LM015-2E81 SDM1 PQ: 0 ANSI: 5
  583. [ 11.486684] sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
  584. [ 11.486691] sd 1:0:0:0: [sdb] 4096-byte physical blocks
  585. [ 11.486731] sd 1:0:0:0: [sdb] Write Protect is off
  586. [ 11.486736] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
  587. [ 11.486801] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  588. [ 11.552278] sdb: sdb1
  589. [ 11.553771] sd 1:0:0:0: [sdb] Attached SCSI disk
  590. [ 11.666161] phy phy-ff770000.syscon:usb2-phy@e450.2: charger = USB_DCP_CHARGER
  591. [ 13.663422] NFSD: starting 45-second grace period (net f00000a1)
  592. [ 70.625501] device-mapper: uevent: version 1.0.3
  593. [ 70.625714] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com
  594. [ 93.478877] md: kicking non-fresh dm-0 from array!
  595. [ 93.495628] md/raid1:md0: active with 1 out of 2 mirrors
  596. [ 93.520724] md0: detected capacity change from 0 to 2000260497408
  597. [ 93.930632] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null)
  598. [ 342.928026] md: recovery of RAID array md0
  599. [ 546.926391] md: md0: recovery done.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement