PADT - ExamView Player 8.1.107.70421

<#
.SYNOPSIS
    This script performs the installation or uninstallation of an application(s).
.DESCRIPTION
    The script is provided as a template to perform an install or uninstall of an application(s).
    The script either performs an "Install" deployment type or an "Uninstall" deployment type.
    The install deployment type is broken down into 3 main sections/phases: Pre-Install, Install, and Post-Install.
    The script dot-sources the AppDeployToolkitMain.ps1 script which contains the logic and functions required to install or uninstall an application.
.PARAMETER DeploymentType
    The type of deployment to perform. Default is: Install.
.PARAMETER DeployMode
    Specifies whether the installation should be run in Interactive, Silent, or NonInteractive mode. Default is: Interactive. Options: Interactive = Shows dialogs, Silent = No dialogs, NonInteractive = Very silent, i.e. no blocking apps. NonInteractive mode is automatically set if it is detected that the process is not user interactive.
.PARAMETER AllowRebootPassThru
    Allows the 3010 return code (requires restart) to be passed back to the parent process (e.g. SCCM) if detected from an installation. If 3010 is passed back to SCCM, a reboot prompt will be triggered.
.PARAMETER TerminalServerMode
    Changes to "user install mode" and back to "user execute mode" for installing/uninstalling applications for Remote Destkop Session Hosts/Citrix servers.
.PARAMETER DisableLogging
    Disables logging to file for the script. Default is: $false.
.EXAMPLE
    Deploy-Application.ps1
.EXAMPLE
    Deploy-Application.ps1 -DeployMode 'Silent'
.EXAMPLE
    Deploy-Application.ps1 -AllowRebootPassThru -AllowDefer
.EXAMPLE
    Deploy-Application.ps1 -DeploymentType Uninstall
.NOTES
    Toolkit Exit Code Ranges:
    60000 - 68999: Reserved for built-in exit codes in Deploy-Application.ps1, Deploy-Application.exe, and AppDeployToolkitMain.ps1
    69000 - 69999: Recommended for user customized exit codes in Deploy-Application.ps1
    70000 - 79999: Recommended for user customized exit codes in AppDeployToolkitExtensions.ps1
.LINK
    http://psappdeploytoolkit.com
#>
[CmdletBinding()]
Param (
    [Parameter(Mandatory=$false)]
    [ValidateSet('Install','Uninstall')]
    [string]$DeploymentType = 'Install',
    [Parameter(Mandatory=$false)]
    [ValidateSet('Interactive','Silent','NonInteractive')]
    [string]$DeployMode = 'Interactive',
    [Parameter(Mandatory=$false)]
    [switch]$AllowRebootPassThru = $false,
    [Parameter(Mandatory=$false)]
    [switch]$TerminalServerMode = $false,
    [Parameter(Mandatory=$false)]
    [switch]$DisableLogging = $false
)

Try {
    ## Set the script execution policy for this process
    Try { Set-ExecutionPolicy -ExecutionPolicy 'ByPass' -Scope 'Process' -Force -ErrorAction 'Stop' } Catch {}

    ##*===============================================
    ##* VARIABLE DECLARATION
    ##*===============================================
    ## Variables: Application
    [string]$appVendor = 'eInstruction'
    [string]$appName = 'ExamView Player'
    [string]$appVersion = '8.1.107.70421'
    [string]$appArch = 'x86'
    [string]$appLang = 'EN'
    [string]$appRevision = '01'
    [string]$appScriptVersion = '1.0.0'
    [string]$appScriptDate = '09/02/2015'
    [string]$appScriptAuthor = 'Chris Thomas'
    ##*===============================================

    ##* Do not modify section below
    #region DoNotModify

    ## Variables: Exit Code
    [int32]$mainExitCode = 0

    ## Variables: Script
    [string]$deployAppScriptFriendlyName = 'Deploy Application'
    [version]$deployAppScriptVersion = [version]'3.6.5'
    [string]$deployAppScriptDate = '08/17/2015'
    [hashtable]$deployAppScriptParameters = $psBoundParameters

    ## Variables: Environment
    If (Test-Path -LiteralPath 'variable:HostInvocation') { $InvocationInfo = $HostInvocation } Else { $InvocationInfo = $MyInvocation }
    [string]$scriptDirectory = Split-Path -Path $InvocationInfo.MyCommand.Definition -Parent

    ## Dot source the required App Deploy Toolkit Functions
    Try {
        [string]$moduleAppDeployToolkitMain = "$scriptDirectory\AppDeployToolkit\AppDeployToolkitMain.ps1"
        If (-not (Test-Path -LiteralPath $moduleAppDeployToolkitMain -PathType 'Leaf')) { Throw "Module does not exist at the specified location [$moduleAppDeployToolkitMain]." }
        If ($DisableLogging) { . $moduleAppDeployToolkitMain -DisableLogging } Else { . $moduleAppDeployToolkitMain }
    }
    Catch {
        If ($mainExitCode -eq 0){ [int32]$mainExitCode = 60008 }
        Write-Error -Message "Module [$moduleAppDeployToolkitMain] failed to load: `n$($_.Exception.Message)`n `n$($_.InvocationInfo.PositionMessage)" -ErrorAction 'Continue'
        ## Exit the script, returning the exit code to SCCM
        If (Test-Path -LiteralPath 'variable:HostInvocation') { $script:ExitCode = $mainExitCode; Exit } Else { Exit $mainExitCode }
    }

    #endregion
    ##* Do not modify section above
    ##*===============================================
    ##* END VARIABLE DECLARATION
    ##*===============================================

    If ($deploymentType -ine 'Uninstall') {
        ##*===============================================
        ##* PRE-INSTALLATION
        ##*===============================================
        [string]$installPhase = 'Pre-Installation'

        ## Show Welcome Message, close Internet Explorer if required, allow up to 3 deferrals, verify there is enough disk space to complete the install, and persist the prompt
        Show-InstallationWelcome -CloseApps 'evplay' -AllowDefer -DeferTimes 3 -CheckDiskSpace -PersistPrompt

        ## Show Progress Message (with the default message)
        Show-InstallationProgress

        ## <Perform Pre-Installation tasks here>


        ##*===============================================
        ##* INSTALLATION
        ##*===============================================
        [string]$installPhase = 'Installation'

        ## Handle Zero-Config MSI Installations
        If ($useDefaultMsi) {
            [hashtable]$ExecuteDefaultMSISplat =  @{ Action = 'Install'; Path = $defaultMsiFile }; If ($defaultMstFile) { $ExecuteDefaultMSISplat.Add('Transform', $defaultMstFile) }
            Execute-MSI @ExecuteDefaultMSISplat; If ($defaultMspFiles) { $defaultMspFiles | ForEach-Object { Execute-MSI -Action 'Patch' -Path $_ } }
        }

        ## <Perform Installation tasks here>
        Execute-Process -Path "$dirFiles\ExamView_Player_Windows_8.1.107.70421.exe" -Parameters "/S /v/qn"


        ##*===============================================
        ##* POST-INSTALLATION
        ##*===============================================
        [string]$installPhase = 'Post-Installation'

        ## <Perform Post-Installation tasks here>
        Remove-File -Path "$envPublic\Desktop\ExamView TestPlayer.lnk"

        ## Display a message at the end of the install
        If (-not $useDefaultMsi) {
            If ($DeployMode -ne "Silent") {
                # Inform the user that the installation has completed
                Show-InstallationPrompt -Message "$installTitle has completed installation. `n `n If you encounter any issues with this software please call Help Desk at x1215." -Icon "Information" -ButtonMiddleText "OK" -NoWait
            }
        }
    }
    ElseIf ($deploymentType -ieq 'Uninstall')
    {
        ##*===============================================
        ##* PRE-UNINSTALLATION
        ##*===============================================
        [string]$installPhase = 'Pre-Uninstallation'

        ## Show Welcome Message, close Internet Explorer with a 60 second countdown before automatically closing
        Show-InstallationWelcome -CloseApps 'evplay' -CloseAppsCountdown 60

        ## Show Progress Message (with the default message)
        Show-InstallationProgress

        ## <Perform Pre-Uninstallation tasks here>


        ##*===============================================
        ##* UNINSTALLATION
        ##*===============================================
        [string]$installPhase = 'Uninstallation'

        ## Handle Zero-Config MSI Uninstallations
        If ($useDefaultMsi) {
            [hashtable]$ExecuteDefaultMSISplat =  @{ Action = 'Uninstall'; Path = $defaultMsiFile }; If ($defaultMstFile) { $ExecuteDefaultMSISplat.Add('Transform', $defaultMstFile) }
            Execute-MSI @ExecuteDefaultMSISplat
        }

        # <Perform Uninstallation tasks here>
        Execute-MSI -Action Uninstall -Path "{C64F8630-A66C-43BB-B758-A1AE9658ECDD}"


        ##*===============================================
        ##* POST-UNINSTALLATION
        ##*===============================================
        [string]$installPhase = 'Post-Uninstallation'

        ## <Perform Post-Uninstallation tasks here>


    }

    ##*===============================================
    ##* END SCRIPT BODY
    ##*===============================================

    ## Call the Exit-Script function to perform final cleanup operations
    Exit-Script -ExitCode $mainExitCode
}
Catch {
    [int32]$mainExitCode = 60001
    [string]$mainErrorMessage = "$(Resolve-Error)"
    Write-Log -Message $mainErrorMessage -Severity 3 -Source $deployAppScriptFriendlyName
    Show-DialogBox -Text $mainErrorMessage -Icon 'Stop'
    Exit-Script -ExitCode $mainExitCode
}