Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [10/28/2017 4:21:59 PM] [START OPERATION_ID = GET_DEVICE_ID]
- [10/28/2017 4:21:59 PM] Open serial port...OK
- [10/28/2017 4:21:59 PM] Connecting to the RIFF Box...OK
- [10/28/2017 4:21:59 PM] Firmware Version: 1.47 (RIFFBOX2), JTAG Manager Version: 1.73
- [10/28/2017 4:21:59 PM] Selected Resurrector: [Samsung I917 V1.0.4466.60929]
- [10/28/2017 4:21:59 PM]
- [10/28/2017 4:21:59 PM] Connecting to the dead body...OK
- [10/28/2017 4:21:59 PM] Set I/O Voltage reads as 3.02V, TCK Frequency is RTCK
- [10/28/2017 4:21:59 PM]
- [10/28/2017 4:21:59 PM] Detected dead body ID: 0x202400E1
- [10/28/2017 4:21:59 PM] [FINISH OPERATION_ID = GET_DEVICE_ID]
- [10/28/2017 4:22:00 PM] [START OPERATION_ID = JTAG_ANALIZE]
- [10/28/2017 4:22:01 PM] Open serial port...OK
- [10/28/2017 4:22:01 PM] Connecting to the RIFF Box...OK
- [10/28/2017 4:22:01 PM] Firmware Version: 1.47 (RIFFBOX2), JTAG Manager Version: 1.73
- [10/28/2017 4:22:01 PM] Selected Resurrector: [Samsung I917 V1.0.4466.60929]
- [10/28/2017 4:22:01 PM]
- [10/28/2017 4:22:01 PM] Connecting to the target...OK
- [10/28/2017 4:22:01 PM] Set I/O Voltage reads as 3.00V, TCK Frequency is RTCK
- [10/28/2017 4:22:01 PM]
- [10/28/2017 4:22:01 PM] Following devices are found on the JTAG chain:
- [10/28/2017 4:22:01 PM] Device on TAP #0: ID = 0x1BA000E1, IR Length = 0x04 bits
- [10/28/2017 4:22:01 PM] Device on TAP #1: ID = 0x202400E1, IR Length = 0x04 bits
- [10/28/2017 4:22:01 PM] Total IR length: 0x0008 bits
- [10/28/2017 4:22:01 PM]
- [10/28/2017 4:22:01 PM] Analizing IDCODE(s) of the JTAG scan chain:
- [10/28/2017 4:22:01 PM] 1. 0x202400E1: Qualcomm QCS8250, H/W Rev. #2
- [10/28/2017 4:22:01 PM] [FINISH OPERATION_ID = JTAG_ANALIZE]
- [10/28/2017 4:22:07 PM] [START OPERATION_ID = DCC_READ_MEMORY]
- [10/28/2017 4:22:07 PM]
- [10/28/2017 4:22:07 PM] Current Settings:
- [10/28/2017 4:22:07 PM] -----------------
- [10/28/2017 4:22:07 PM] Address: 000000000000
- [10/28/2017 4:22:07 PM] Length: 000000000000
- [10/28/2017 4:22:07 PM] Address Space: ROM1
- [10/28/2017 4:22:07 PM] AutoFullFlash: CHECKED
- [10/28/2017 4:22:07 PM] Use End Address: UNCHECKED
- [10/28/2017 4:22:07 PM] ECC Module Enabled: UNCHECKED
- [10/28/2017 4:22:07 PM] Image File is Used: CHECKED
- [10/28/2017 4:22:07 PM] Use Address as Offset: UNCHECKED
- [10/28/2017 4:22:07 PM] Main (CHECKED):
- [10/28/2017 4:22:07 PM] Redu (UNCHECKED):
- [10/28/2017 4:22:07 PM]
- [10/28/2017 4:22:08 PM] Open serial port...OK
- [10/28/2017 4:22:08 PM] Connecting to the RIFF Box...OK
- [10/28/2017 4:22:08 PM] Firmware Version: 1.47 (RIFFBOX2), JTAG Manager Version: 1.73
- [10/28/2017 4:22:08 PM] Selected Resurrector: [Samsung I917 V1.0.4466.60929]
- [10/28/2017 4:22:08 PM]
- [10/28/2017 4:22:08 PM] Connecting to the dead body...OK
- [10/28/2017 4:22:08 PM] Detected dead body ID: 0x202400E1 - CORRECT!
- [10/28/2017 4:22:08 PM] Set I/O Voltage reads as 3.02V, TCK Frequency is RTCK
- [10/28/2017 4:22:08 PM] Adaptive Clocking RTCK Sampling is: [Sample at 1 MHz]
- [10/28/2017 4:22:08 PM] Settings Code: 0x25010009000000000000000000000000
- [10/28/2017 4:22:08 PM]
- [10/28/2017 4:22:08 PM] Resurrection sequence started.
- [10/28/2017 4:22:08 PM] Establish communication with the phone...OK
- [10/28/2017 4:22:08 PM] Initializing internal hardware configuration...OK
- [10/28/2017 4:22:08 PM] Uploading resurrector data into memory...OK
- [10/28/2017 4:22:08 PM] Starting communication with resurrector...FAILED
- [10/28/2017 4:22:08 PM] ERROR: Wrong DCC data checksum.
- [10/28/2017 4:22:08 PM] [FINISH OPERATION_ID = DCC_READ_MEMORY]
- [10/28/2017 4:22:15 PM] [START OPERATION_ID = RESTART_TARGET]
- [10/28/2017 4:22:15 PM] Open serial port...OK
- [10/28/2017 4:22:15 PM] Connecting to the RIFF Box...OK
- [10/28/2017 4:22:15 PM] Firmware Version: 1.47 (RIFFBOX2), JTAG Manager Version: 1.73
- [10/28/2017 4:22:15 PM] Selected Resurrector: [Samsung I917 V1.0.4466.60929]
- [10/28/2017 4:22:15 PM]
- [10/28/2017 4:22:15 PM] Restarting target (nRST Low then High)...OK
- [10/28/2017 4:22:15 PM] [FINISH OPERATION_ID = RESTART_TARGET]
- [10/28/2017 4:22:18 PM] [START OPERATION_ID = PLUGIN_EXECUTE]
- [10/28/2017 4:22:45 PM] [FINISH OPERATION_ID = PLUGIN_EXECUTE]
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement