Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.8.3-slitaz64] (local build)
- Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Model Family: Seagate Momentus 5400.6
- Device Model: ST9500325AS
- Serial Number: 6VEREXJQ
- LU WWN Device Id: 5 000c50 036e0f1fb
- Firmware Version: 0003SDM1
- User Capacity: 500.107.862.016 bytes [500 GB]
- Sector Size: 512 bytes logical/physical
- Rotation Rate: 5400 rpm
- Device is: In smartctl database [for details use: -P show]
- ATA Version is: ATA8-ACS T13/1699-D revision 4
- SATA Version is: SATA 2.6, 3.0 Gb/s
- Local Time is: Tue Feb 1 18:39:27 2022 CET
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- AAM feature is: Unavailable
- APM level is: 128 (minimum power consumption without standby)
- Rd look-ahead is: Enabled
- Write cache is: Enabled
- DSN feature is: Unavailable
- ATA Security is: Disabled, NOT FROZEN [SEC1]
- Wt Cache Reorder: Unknown
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: FAILED!
- Drive failure expected in less than 24 hours. SAVE ALL DATA.
- See vendor-specific Attribute list for failed Attributes.
- General SMART Values:
- Offline data collection status: (0x00) Offline data collection activity
- was never started.
- Auto Offline Data Collection: Disabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: ( 0) seconds.
- Offline data collection
- capabilities: (0x73) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- No Offline surface scan supported.
- Self-test supported.
- Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 1) minutes.
- Extended self-test routine
- recommended polling time: ( 145) minutes.
- Conveyance self-test routine
- recommended polling time: ( 2) minutes.
- SCT capabilities: (0x103b) SCT Status supported.
- SCT Error Recovery Control supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 10
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
- 1 Raw_Read_Error_Rate POSR-- 083 081 006 - 208643877
- 3 Spin_Up_Time PO---- 099 098 000 - 0
- 4 Start_Stop_Count -O--CK 099 099 020 - 1046
- 5 Reallocated_Sector_Ct PO--CK 001 001 036 NOW 2048
- 7 Seek_Error_Rate POSR-- 064 060 030 - 3123929
- 9 Power_On_Hours -O--CK 100 100 000 - 198
- 10 Spin_Retry_Count PO--C- 100 100 097 - 0
- 12 Power_Cycle_Count -O--CK 100 100 020 - 945
- 184 End-to-End_Error -O--CK 100 100 099 - 0
- 187 Reported_Uncorrect -O--CK 001 001 000 - 114
- 188 Command_Timeout -O--CK 088 068 000 - 1112413503826
- 189 High_Fly_Writes -O-RCK 100 100 000 - 0
- 190 Airflow_Temperature_Cel -O---K 078 054 045 - 22 (Min/Max 21/22)
- 191 G-Sense_Error_Rate -O--CK 100 100 000 - 1
- 192 Power-Off_Retract_Count -O--CK 100 100 000 - 165
- 193 Load_Cycle_Count -O--CK 096 096 000 - 9186
- 194 Temperature_Celsius -O---K 022 046 000 - 22 (0 10 0 0 0)
- 195 Hardware_ECC_Recovered -O-RC- 045 043 000 - 208643877
- 197 Current_Pending_Sector -O--C- 100 100 000 - 0
- 198 Offline_Uncorrectable ----C- 100 100 000 - 0
- 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 34
- 254 Free_Fall_Sensor -O--CK 100 100 000 - 0
- ||||||_ K auto-keep
- |||||__ C event count
- ||||___ R error rate
- |||____ S speed/performance
- ||_____ O updated online
- |______ P prefailure warning
- General Purpose Log Directory Version 1
- SMART Log Directory Version 1 [multi-sector log support]
- Address Access R/W Size Description
- 0x00 GPL,SL R/O 1 Log Directory
- 0x01 GPL,SL R/O 1 Summary SMART error log
- 0x02 GPL,SL R/O 5 Comprehensive SMART error log
- 0x03 GPL,SL R/O 5 Ext. Comprehensive SMART error log
- 0x06 GPL,SL R/O 1 SMART self-test log
- 0x07 GPL,SL R/O 1 Extended self-test log
- 0x09 GPL,SL R/W 1 Selective self-test log
- 0x10 GPL,SL R/O 1 NCQ Command Error log
- 0x11 GPL,SL R/O 1 SATA Phy Event Counters log
- 0x21 GPL,SL R/O 1 Write stream error log
- 0x22 GPL,SL R/O 1 Read stream error log
- 0x80-0x9f GPL,SL R/W 16 Host vendor specific log
- 0xa1 GPL,SL VS 20 Device vendor specific log
- 0xa2 GPL VS 2248 Device vendor specific log
- 0xa8 GPL,SL VS 65 Device vendor specific log
- 0xa9 GPL,SL VS 1 Device vendor specific log
- 0xb0 GPL VS 2864 Device vendor specific log
- 0xbe-0xbf GPL VS 65535 Device vendor specific log
- 0xe0 GPL,SL R/W 1 SCT Command/Status
- 0xe1 GPL,SL R/W 1 SCT Data Transfer
- SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
- Device Error Count: 3670 (device log contains only the most recent 20 errors)
- CR = Command Register
- FEATR = Features Register
- COUNT = Count (was: Sector Count) Register
- LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
- LH = LBA High (was: Cylinder High) Register ] LBA
- LM = LBA Mid (was: Cylinder Low) Register ] Register
- LL = LBA Low (was: Sector Number) Register ]
- DV = Device (was: Device/Head) Register
- DC = Device Control Register
- ER = Error register
- ST = Status register
- Powered_Up_Time is measured from power on, and printed as
- DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
- SS=sec, and sss=millisec. It "wraps" after 49.710 days.
- Error 3670 [9] occurred at disk power-on lifetime: 198 hours (8 days + 6 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 04 -- 71 00 04 00 32 00 00 00 9d e0 00 Device Fault; Error: ABRT
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 2f 00 00 00 01 00 00 00 00 00 10 a0 00 00:00:38.217 READ LOG EXT
- 60 00 00 00 08 00 01 00 ae 00 c0 40 00 00:00:35.068 READ FPDMA QUEUED
- 60 00 00 00 08 00 01 00 ae 00 b8 40 00 00:00:33.835 READ FPDMA QUEUED
- 60 00 00 00 08 00 01 00 ae 00 b0 40 00 00:00:33.208 READ FPDMA QUEUED
- 60 00 00 00 08 00 01 00 a0 00 18 40 00 00:00:26.877 READ FPDMA QUEUED
- Error 3669 [8] occurred at disk power-on lifetime: 198 hours (8 days + 6 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 04 -- 71 00 04 00 32 00 00 00 9d 40 00 Device Fault; Error: ABRT at LBA = 0x320000009d = 214748364957
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 60 00 00 00 08 00 01 00 ae 00 c0 40 00 00:00:35.068 READ FPDMA QUEUED
- 60 00 00 00 08 00 01 00 ae 00 b8 40 00 00:00:33.835 READ FPDMA QUEUED
- 60 00 00 00 08 00 01 00 ae 00 b0 40 00 00:00:33.208 READ FPDMA QUEUED
- 60 00 00 00 08 00 01 00 a0 00 18 40 00 00:00:26.877 READ FPDMA QUEUED
- 60 00 00 00 08 00 01 00 a0 00 10 40 00 00:00:26.769 READ FPDMA QUEUED
- Error 3668 [7] occurred at disk power-on lifetime: 198 hours (8 days + 6 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 04 -- 71 00 04 00 32 00 00 00 9d e0 00 Device Fault; Error: ABRT
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 2f 00 00 00 01 00 00 00 00 00 10 a0 00 00:00:28.360 READ LOG EXT
- 60 00 00 00 08 00 01 00 ae 00 b8 40 00 00:00:25.003 READ FPDMA QUEUED
- 60 00 00 00 08 00 01 00 ae 00 b0 40 00 00:00:24.529 READ FPDMA QUEUED
- 60 00 00 00 08 00 01 00 ae 00 78 40 00 00:00:22.779 READ FPDMA QUEUED
- 60 00 00 00 08 00 01 00 ae 00 70 40 00 00:00:22.229 READ FPDMA QUEUED
- Error 3667 [6] occurred at disk power-on lifetime: 198 hours (8 days + 6 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 04 -- 71 00 04 00 32 00 00 00 9d 40 00 Device Fault; Error: ABRT at LBA = 0x320000009d = 214748364957
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 60 00 00 00 08 00 01 00 ae 00 b8 40 00 00:00:25.003 READ FPDMA QUEUED
- 60 00 00 00 08 00 01 00 ae 00 b0 40 00 00:00:24.529 READ FPDMA QUEUED
- 60 00 00 00 08 00 01 00 ae 00 78 40 00 00:00:22.779 READ FPDMA QUEUED
- 60 00 00 00 08 00 01 00 ae 00 70 40 00 00:00:22.229 READ FPDMA QUEUED
- 60 00 00 00 08 00 01 00 ae 00 60 40 00 00:00:21.249 READ FPDMA QUEUED
- Error 3666 [5] occurred at disk power-on lifetime: 198 hours (8 days + 6 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 04 -- 71 00 04 00 32 00 00 00 9d e0 00
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- ec 00 00 00 00 00 00 00 00 00 00 a0 00 00:02:06.750 IDENTIFY DEVICE
- 42 00 00 02 00 00 01 00 ae 00 00 40 00 00:01:53.509 READ VERIFY SECTOR(S) EXT
- 42 00 00 02 00 00 01 00 a0 00 00 e0 00 00:01:51.569 READ VERIFY SECTOR(S) EXT
- 42 00 00 02 00 00 01 00 9e 00 00 40 00 00:01:51.161 READ VERIFY SECTOR(S) EXT
- 42 00 00 02 00 00 01 00 34 00 00 40 00 00:01:50.672 READ VERIFY SECTOR(S) EXT
- Error 3665 [4] occurred at disk power-on lifetime: 198 hours (8 days + 6 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 40 -- 51 00 00 00 01 00 ae 00 c6 00 00 Error: UNC at LBA = 0x100ae00c6 = 4306370758
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 42 00 00 02 00 00 01 00 ae 00 00 40 00 00:01:53.509 READ VERIFY SECTOR(S) EXT
- 42 00 00 02 00 00 01 00 a0 00 00 e0 00 00:01:51.569 READ VERIFY SECTOR(S) EXT
- 42 00 00 02 00 00 01 00 9e 00 00 40 00 00:01:51.161 READ VERIFY SECTOR(S) EXT
- 42 00 00 02 00 00 01 00 34 00 00 40 00 00:01:50.672 READ VERIFY SECTOR(S) EXT
- 42 00 00 02 00 00 00 00 02 00 00 e0 00 00:01:50.187 READ VERIFY SECTOR(S) EXT
- Error 3664 [3] occurred at disk power-on lifetime: 198 hours (8 days + 6 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 04 -- 71 00 04 00 32 00 00 00 9d e0 00 Device Fault; Error: ABRT
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- a1 00 00 00 00 00 00 00 00 00 00 a0 00 00:00:19.022 IDENTIFY PACKET DEVICE
- ec 00 00 00 00 00 00 00 00 00 00 a0 00 00:00:19.021 IDENTIFY DEVICE
- 42 00 00 02 00 00 01 00 ae 00 00 40 00 00:00:14.596 READ VERIFY SECTOR(S) EXT
- 42 00 00 02 00 00 01 00 a2 00 00 40 00 00:00:10.669 READ VERIFY SECTOR(S) EXT
- 42 00 00 02 00 00 00 00 02 00 00 e0 00 00:00:09.732 READ VERIFY SECTOR(S) EXT
- Error 3663 [2] occurred at disk power-on lifetime: 198 hours (8 days + 6 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 04 -- 71 00 04 00 32 00 00 00 9d e0 00
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- ec 00 00 00 00 00 00 00 00 00 00 a0 00 00:00:19.021 IDENTIFY DEVICE
- 42 00 00 02 00 00 01 00 ae 00 00 40 00 00:00:14.596 READ VERIFY SECTOR(S) EXT
- 42 00 00 02 00 00 01 00 a2 00 00 40 00 00:00:10.669 READ VERIFY SECTOR(S) EXT
- 42 00 00 02 00 00 00 00 02 00 00 e0 00 00:00:09.732 READ VERIFY SECTOR(S) EXT
- 42 00 00 02 00 00 00 00 00 00 00 e0 00 00:00:09.673 READ VERIFY SECTOR(S) EXT
- SMART Extended Self-test Log Version: 1 (1 sectors)
- Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
- # 1 Short offline Completed: unknown failure 90% 197 0
- # 2 Short offline Completed: unknown failure 90% 197 0
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
- SCT Status Version: 3
- SCT Version (vendor specific): 522 (0x020a)
- Device State: Active (0)
- Current Temperature: 22 Celsius
- Power Cycle Min/Max Temperature: 21/22 Celsius
- Lifetime Min/Max Temperature: 10/46 Celsius
- Under/Over Temperature Limit Count: 0/2
- SCT Temperature History Version: 2
- Temperature Sampling Period: 1 minute
- Temperature Logging Interval: 1 minute
- Min/Max recommended Temperature: 0/ 0 Celsius
- Min/Max Temperature Limit: 0/ 0 Celsius
- Temperature History Size (Index): 128 (126)
- Index Estimated Time Temperature Celsius
- 127 2022-02-01 16:32 21 **
- 0 2022-02-01 16:33 ? -
- 1 2022-02-01 16:34 22 ***
- 2 2022-02-01 16:35 ? -
- 3 2022-02-01 16:36 22 ***
- 4 2022-02-01 16:37 ? -
- 5 2022-02-01 16:38 22 ***
- 6 2022-02-01 16:39 ? -
- 7 2022-02-01 16:40 18 -
- 8 2022-02-01 16:41 ? -
- 9 2022-02-01 16:42 12 -
- 10 2022-02-01 16:43 ? -
- 11 2022-02-01 16:44 15 -
- 12 2022-02-01 16:45 16 -
- 13 2022-02-01 16:46 18 -
- 14 2022-02-01 16:47 ? -
- 15 2022-02-01 16:48 18 -
- 16 2022-02-01 16:49 19 -
- 17 2022-02-01 16:50 20 *
- 18 2022-02-01 16:51 21 **
- 19 2022-02-01 16:52 21 **
- 20 2022-02-01 16:53 22 ***
- 21 2022-02-01 16:54 22 ***
- 22 2022-02-01 16:55 ? -
- 23 2022-02-01 16:56 23 ****
- 24 2022-02-01 16:57 ? -
- 25 2022-02-01 16:58 23 ****
- 26 2022-02-01 16:59 24 *****
- ... ..( 4 skipped). .. *****
- 31 2022-02-01 17:04 24 *****
- 32 2022-02-01 17:05 ? -
- 33 2022-02-01 17:06 25 ******
- 34 2022-02-01 17:07 25 ******
- 35 2022-02-01 17:08 25 ******
- 36 2022-02-01 17:09 ? -
- 37 2022-02-01 17:10 25 ******
- 38 2022-02-01 17:11 24 *****
- 39 2022-02-01 17:12 25 ******
- 40 2022-02-01 17:13 ? -
- 41 2022-02-01 17:14 12 -
- 42 2022-02-01 17:15 ? -
- 43 2022-02-01 17:16 16 -
- 44 2022-02-01 17:17 21 **
- 45 2022-02-01 17:18 23 ****
- 46 2022-02-01 17:19 ? -
- 47 2022-02-01 17:20 26 *******
- 48 2022-02-01 17:21 ? -
- 49 2022-02-01 17:22 12 -
- 50 2022-02-01 17:23 19 -
- 51 2022-02-01 17:24 20 *
- 52 2022-02-01 17:25 21 **
- 53 2022-02-01 17:26 25 ******
- 54 2022-02-01 17:27 25 ******
- 55 2022-02-01 17:28 26 *******
- 56 2022-02-01 17:29 26 *******
- 57 2022-02-01 17:30 26 *******
- 58 2022-02-01 17:31 27 ********
- ... ..( 2 skipped). .. ********
- 61 2022-02-01 17:34 27 ********
- 62 2022-02-01 17:35 ? -
- 63 2022-02-01 17:36 27 ********
- 64 2022-02-01 17:37 27 ********
- 65 2022-02-01 17:38 28 *********
- 66 2022-02-01 17:39 ? -
- 67 2022-02-01 17:40 24 *****
- 68 2022-02-01 17:41 21 **
- 69 2022-02-01 17:42 22 ***
- 70 2022-02-01 17:43 23 ****
- 71 2022-02-01 17:44 24 *****
- 72 2022-02-01 17:45 25 ******
- 73 2022-02-01 17:46 25 ******
- 74 2022-02-01 17:47 26 *******
- ... ..( 2 skipped). .. *******
- 77 2022-02-01 17:50 26 *******
- 78 2022-02-01 17:51 ? -
- 79 2022-02-01 17:52 27 ********
- 80 2022-02-01 17:53 ? -
- 81 2022-02-01 17:54 27 ********
- 82 2022-02-01 17:55 27 ********
- 83 2022-02-01 17:56 ? -
- 84 2022-02-01 17:57 28 *********
- 85 2022-02-01 17:58 ? -
- 86 2022-02-01 17:59 28 *********
- 87 2022-02-01 18:00 ? -
- 88 2022-02-01 18:01 28 *********
- ... ..( 3 skipped). .. *********
- 92 2022-02-01 18:05 28 *********
- 93 2022-02-01 18:06 29 **********
- 94 2022-02-01 18:07 29 **********
- 95 2022-02-01 18:08 29 **********
- 96 2022-02-01 18:09 ? -
- 97 2022-02-01 18:10 27 ********
- 98 2022-02-01 18:11 28 *********
- 99 2022-02-01 18:12 29 **********
- 100 2022-02-01 18:13 30 ***********
- 101 2022-02-01 18:14 31 ************
- 102 2022-02-01 18:15 ? -
- 103 2022-02-01 18:16 31 ************
- 104 2022-02-01 18:17 31 ************
- 105 2022-02-01 18:18 31 ************
- 106 2022-02-01 18:19 32 *************
- 107 2022-02-01 18:20 ? -
- 108 2022-02-01 18:21 32 *************
- 109 2022-02-01 18:22 ? -
- 110 2022-02-01 18:23 32 *************
- 111 2022-02-01 18:24 32 *************
- 112 2022-02-01 18:25 32 *************
- 113 2022-02-01 18:26 ? -
- 114 2022-02-01 18:27 32 *************
- 115 2022-02-01 18:28 ? -
- 116 2022-02-01 18:29 33 **************
- 117 2022-02-01 18:30 ? -
- 118 2022-02-01 18:31 27 ********
- 119 2022-02-01 18:32 ? -
- 120 2022-02-01 18:33 18 -
- 121 2022-02-01 18:34 ? -
- 122 2022-02-01 18:35 18 -
- 123 2022-02-01 18:36 20 *
- 124 2022-02-01 18:37 ? -
- 125 2022-02-01 18:38 21 **
- 126 2022-02-01 18:39 22 ***
- SCT Error Recovery Control:
- Read: Disabled
- Write: Disabled
- Device Statistics (GP/SMART Log 0x04) not supported
- Pending Defects log (GP Log 0x0c) not supported
- SATA Phy Event Counters (GP Log 0x11)
- ID Size Value Description
- 0x000a 2 1 Device-to-host register FISes sent due to a COMRESET
- 0x0001 2 0 Command failed due to ICRC error
- 0x0003 2 0 R_ERR response for device-to-host data FIS
- 0x0004 2 0 R_ERR response for host-to-device data FIS
- 0x0006 2 0 R_ERR response for device-to-host non-data FIS
- 0x0007 2 0 R_ERR response for host-to-device non-data FIS
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement