LGE attestation CA1#0!
General LGE attestation CA1
    GEUMCHEON1
160315064425Z
360311064425Z0
eunwoo.lee1 0
General LGE attestation1
    GEUMCHEON1
07 0001 SHA2561
06 0266 MODEL_ID1
05 000000a8 SW_SIZE1
04 0031 OEM_ID1"0
03 0000000000000002 DEBUG1"0
02 009690E100310266 HW_ID1"0
01 0000000100000009 SW_ID0
LGE ROOT CA1
General LGE rootca1
    GEUMCHEON1
LGE ROOT CA1
General LGE rootca1
    GEUMCHEON1
140930002640Z
340925002640Z0
LGE attestation CA1#0!
General LGE attestation CA1
    GEUMCHEON1
LGE ROOT CA1
General LGE rootca1
    GEUMCHEON1
LGE ROOT CA1
General LGE rootca1
    GEUMCHEON1
140930002640Z
340925002640Z0r1
LGE ROOT CA1
General LGE rootca1
    GEUMCHEON1
Montgomery multiplication for ARMv4, CRYPTOGAMS by <appro@openssl.org>
SHA1 block transform for ARMv4, CRYPTOGAMS by <appro@openssl.org>
SHA256 block transform for ARMv4, CRYPTOGAMS by <appro@openssl.org>
Unsupported SDC slot passed
%s : pon_reason is %d cold_boot:%d
PON_PON_PBL_STATUS:0x%x
PON_PON_REASON1:0x%x
PON_WARM_RESET_REASON1:0x%x
PON_WARM_RESET_REASON2:0x%x
PON_POFF_REASON1:0x%x
PON_POFF_REASON2:0x%x
PON_SOFT_RESET_REASON1:0x%x
PON_SOFT_RESET_REASON2:0x%x
TEMP_ALARM_STATUS1:0x%x
SMBCHG_USB_CHGPTH_INT_RT_STS:0x%x
mmc init failed!
ASSERT FAILED at (%s:%d): %s
target/msm8992_alphap/init.c
Platform type: %u is not supported
restart_reason =  0x%x
Rebooting failed
t_usb_iface
target_init()
Going down for shutdown.
Shutdown failed
target_pause_for_battery_charge
target/msm8992_alphap/meminfo.c
smem_ram_ptable_init_v1()
Failed to add secondary banks memory addresses
lge_panel_config_pre_init
target_dsv_ctrl
dsi_pll_20nm_enable_seq
DSV: write byte fail
DSV: read byte fail
backlight structure is not available
backlight type:%d not supported
failed to initialize i2c dev
target/msm8992_alphap/target_display.c
LM3697_write_reg
LM3697 read reg, level = %u
Set LCD brightness minimum, No Battery or No proper Battery with 910K Cable
130K factory cable detect. LM3697 BL OFF
LCD dimming mode. Set LCD brightness minimum.
%s: Failed to restore MDP security configs
%s: DSI PLL lock failed
PLL failed to lock!
%s: DSI PLL lock Success
%s: DW8768 I2C WRITE FAIL
%s: SM5107 I2C WRITE FAIL
%s: SM5107 Tablet Mode Set FAIL
%s: DSV_VENDOR_ID = %d
 mdss_mdp.panel=
command line argument is greater than buffer size
qcom,mdss_dsi_lgd_r69007_1440p_mipi0_cmd
Display %s, lcd_maker_id = %d
%s : I2C Init Fail
%s : funtion called
sim_video_panel
sim_dualdsi_video_panel
sim_cmd_panel
sim_dualdsi_cmd_panel
Selected panel: %s
Skip panel configuration
%s: HDMI is primary
Forcing continuous splash disable
target_display_init
target_panel_clock
dsv_i2c_configure
Not able to search the panel:%s
OEM panel override:%s
## LGD_LG4945_QHD_DUALDSI_CMD_PANEL
%s JDI INCELL
%s LGD INCELL
%s LGD_LG4945_QHD_DUALDSI_CMD_PANEL
%s LGD_R69007_QHD_DUALDSI INCELL COMMAND MODE
PMIC_8941
qcom,mdss_dsi_lgd_lg4945_1440p_mipi0_cmd
qcom,mdss-dsi-panel
DISPLAY_1
qcom,mdss_dsi_lgd_lg4945_1440p_mipi1_cmd
qcom,mdss_dsi_lgd_lg4943_1440p_mipi0_cmd
qcom,mdss_dsi_lgd_lg4943_1440p_mipi1_cmd
qcom,mdss_dsi_lgd_r69007_1440p_mipi1_cmd
qcom,mdss_dsi_jdi_nt36850_1440p_mipi0_cmd
qcom,mdss_dsi_jdi_nt36850_1440p_mipi1_cmd
qcom,dsi_jdi_4k_video_0
qcom,dsi_jdi_4k_video_1
qcom,mdss_dsi_jdi_qhd_dualmipi0_cmd
qcom,mdss_dsi_jdi_qhd_dualmipi1_cmd
qcom,dsi_jdi_qhd_video_0
qcom,dsi_jdi_qhd_video_1
qcom,mdss_dsi_sharp_wqxga_video_0
qcom,mdss_dsi_sharp_wqxga_video_1
init_panel_data
ERROR: unable to write shared memory for ID_VENDOR1
Could not set %d value to %s property in the chosen node.
Could not set %lld value to %s property in the chosen node.
Could not set %s value to %s property in the chosen node.
bootcmd_add_pair
bootcmd_update_cmdline
bootcmd_list_init
bootcmd_set_value_by_key
%s : %s overflow length
%s: invalid key=%p or value=%p
%s: bootcmd list not found, key=%s
%s: invalid key
%s: invalid key size
%s: already exist key(%s)
%s: memory allocation failed
%s: initalized fail at the %d
%s: already exist key & value(%s, %s)
%s: value changed from %s to %s at %s
%s: bootcmd is not initialized
appended LGE boot command list is belows:
 [%2d] key=%s, value=%s
FOTA_Reboot
[CCAudit] Start-up BOOT MODE = %s
FOTA_Reboot_LCDOFF
Reboot_by_Battery
Recovery_mode
Reboot_by_PowerKey
FASTBOOT_mode
Alarm_Boot
FOTA_Reboot_LCD_OUT_OFF
Reboot_LCDOFF
%s: you should call 'bootcmd_init() before
%s: too much long cmdline size(%d)
bootcmd: %s=%s
bootcmd: %s
%s : remove all bootcmd_arg
lge.battid
lge.bootreason
boot_cpus
Critical_Error
Crash_on_the_LK
Crash_on_the_LAF
SDI_Apps_Watchdog_Reset
SDI_Err_Fatal
SDI_Undef_Error
Unknown_Reset
Apps_Watchdog_Bite
TZ_Crash
Apps_Watchdog_Bark
AHB_timeout
OCMEM_NOC_Error
MM_NOC_Error
Peripheral_NOC_Error
SYS_NOC_Error
CONF_NOC_Error
XPU_Error
Thermal_Bite_Reset
TZ_Undef_Error
RPM_Crash
RPM_Watchdog_Bite
RPM_Reset
RPM_Undef_Error
Kernel_Crash
Kernel_Undef_Error
Undef_error
Failed_to_shutdown
Resetting_the_SoC
Unknown_restart_level
Failed_to_powerup
Timeout_waiting
Crash_during_SSR
Crash_limit_overflow
bootcmd_add_new_key
bootcmd_list_deinit
bootcmd_check_value_len
bootcmd_check_key_len
bootmode_set_cable
bootmode_set_ddr_info
%s: invalid arguement(%d)
%s: disabled as default
%s: board revision value is %d from smem
%s: smem read failed
%s: usb cable type/port type is %d/%d from smem
androidboot.ddr_size
%s: DDR Size info %llu from smem
androidboot.ddr_info
%s: DDR MR info 0x%x from smem
%s: lcd maker id is %d from smem
ERROR: unable to read shared memory for battery info
batt_info = %d
DS2704_N
DS2704_L
DS2704_C
ISL6296_N
ISL6296_L
ISL6296_C
RA4301_VC0
RA4301_VC1
RA4301_VC2
SW3800_VC0
SW3800_VC1
SW3800_VC2
[Factory] batt_id : %d
MSM8992 ver : 0x%x
androidboot.mode
mfts mode!!
mfts.mode
PIF_DETECT:%d
qem_130k
qem_910k
pif_130k
pif_910k
DTC_500MA
Abnormal_400MA
lcd_primary
lcd_secondary
lcd_reserved
bootmode_set_board_revision
bootmode_set_hreset
bootmode_set_lcd_maker_id
ftm_get_partition_offset
ftm_check_validation
ftm_set_item
ftm_get_item
%s: FTM partition doesn't exist
BSP Forever
%s: target is not emmc boot
%s: failed get offset
%s: mmc read failure
%s: FTM magic string is not equal. %s
%s: id=%d, val buf is NULL
%s: out of id range(%d)
%s: invalid id(%d)
%s: mmc write failure - %s
%s: mmc read failure - %s
get_qem = %d
get_charger_skip = %d
sniff d/l ftm_get_item fail
sniff d/l config:%s
get_encrypt_on_minios = %d
%s: FTM partition can't use
%s: name len(%d) is so long
%s: FTM item init failed in %d
is_mfts_mode = %d
ftm_init
ftm_add_item
selectmode_check_usb_cable
%s: vol_up=%d, vol_down=%d, power=%d, home=%d
%s: without usb cable
%s: with usb cable. not factory cable
extra_key_combo[0] start
extra_key_combo[1] start
[spend rest of time] extra_key_combo[2] start
final key combination: vol_up=%d, vol_down=%d, power=%d, home=%d
%s: with factory usb cable
[key change] key_mid end ===============
[key change] key_end1 end ==============
selectmode_get_current_key_info
sbl_log_init
Failed to read SMEM_ID_VENDOR2
%s : log_size: %d is not normal!!
skip sbl log!!
%s : sbl_log=%p, log_size=%d, delta_time=%d
hallic_get_status
read_image_info_from_emmc
%s: Invalid argument
raw_resources
%s: No '%s' partition found
%s: Read request out of '%s' boundaries
%s: memory allocation failed.
%s: Reading MMC failed
%s: %s partition not supported for NAND targets.
%s : hall ic enabled
%s : hall ic disabled
%s: Reading magic info failed
BOOT_IMAGE_RLE
%s: total_image_num (%d)
%s: Memory allocation for img_info failed.
%s: Reading image info failed
%s: No image data
%s: Reading image data failed: offset = 0x%X, size = %d
%s: Finding image %s
%s: img_info[%d].name %s
%s: total_num is invalid (%d)
%s: Image not found
%s: failed: %s, %d
lglogo_image
%s : do not use hall ic (pplus)
%s: chargerlogo mode check
%s: cold_boot=%d, pon1=%d, key=%d, cable_type=%d
load_charger_image
lglogo_image.
display_lge_splash_screen_from_emmc
display_lge_image_on_screen
read_image_data_from_emmc
get_image_info
read_emmc
kswitch_load_flag
disabled
[KSwitch] (%s): has no ftm kill switch item
[KSwitch] ftm kill switch item value=%s
[KSwitch] (%s): ftm kill switch item has invalid format
[KSwitch] *** (%s): invalid ftm kill switch range ***
[KSwitch] kill switch flag loading completed!
| recovery=%s
| laf=%s
kswitch=
verify_image_with_sig
boot_verifier: Calloc failed during verification
boot_verifier: Signature length is invalid.
boot_verifier: Reading digest failed
boot_verifier: Digest length error.
boot_verifier: Device is in ORANGE boot state.
boot_verifier: Skipping boot verification.
lge.signed_image
[CCAutdit] boot_verifier: Error while reading signature length.
[CCAutdit] boot_verifier: d2i_VERIFIED_BOOT_SIG fail
kernel hash value : %s
boot_verifier: oem keystore length is invalid.
keystore
[CCAutdit] boot_verifier: verification failure due to target name mismatch
[CCAutdit] boot_verifier: image length is different. (%d vs %d)
%s:%d: Keystore is null
platform/lge_shared/lge_boot_verifier.c
Verification with oem keystore failed. Use embedded certificate for verification
RSA KEY found from the embedded certificate
[CCAutdit] Unable to extract public key from certificate
%02X%02X-%02X%02X-%02X%02X
verified for red state
[CCAutdit] signature of the boot image is different
boot_verifier: Device is in GREEN boot state.
boot_verifier: Device is in YELLOW boot state.
boot_verifier: Device is in RED boot state.
boot_verifier: keystore length is invalid.
--------------------------------------------
Boot verification Fail!!
- cause : MISMATCH_SIG_LEN
- cause : PARSE_SIG_FAIL
- cause : MISMATCH_TARGET_NAME
- cause : MISMATCH_IMG_LEN
- cause : EXTRACT_PUBK_FAIL
- cause : DIFFERENT_HASH
- cause : OTHER REASON
gpt_integrity : invalid param
gpt_integrity : %4d-%s
gpt_integrity : %s partition not exist
gpt_integrity : %s partition mismatch : %llx:%llx, %llx:%llx
mykeybag
KEYSTORE_INNER
algorithm_id
key_material
VERIFIED_BOOT_SIG
certificate
auth_attr
AUTH_ATTR
unknown platform id : %d
%08X%08X
No memory!
keystore length is invalid.
%s is loaded
No unlock key!
Found unlock key!
sig is null : %d
DeviceID : %s
000000000000000
IMEI : %s
Nonce : %02X%02X%02X%02X%02X%02X%02X%02X%02X%02X%02X%02X%02X%02X%02X%02X
Nonce : %d
verify_image : %d
%s verified
killswitch
public key mismatch : %s
unlock key mismatch
Partition table doesn't exist
failed to erase partition
* Welcome to Fastboot Mode for bootloader unlock :
 Please check "Enable OEM unlock" in Developer options
* Quick Guidance
   1) How to unlock
      fastboot oem unlock
   2) Check bootloader is unlocked
      fastboot getvar unlocked
* Welcome to Fastboot Mode :
* HOW TO exit fastboot mode
   1) Press the Power button for 10 secs to turn off the device
   2) Use 'fastboot reboot' command if the fastboot is available
   1) Press the Power button for 10 secs
      to turn off the device
   2) Use 'fastboot reboot' command
      if the fastboot is available
Unlock Bootloader Error!
LGE_KEYSTORE
keyalias
KILLSWITCH_SIG
recovery
userdata
lge_secureboot1
Security1
    Geumcheon1
160211102543Z
170210102543Z0k1
lge_secureboot1
Security1
    Geumcheon1
keystore
#@pCj}%!
ksut_tmus_msm89920
check FTM magic string
firstboot already finished
firstboot and try to update gpt
card info : last LBA %lld, backup gpt %lld
failed to erase mmc
androidboot.wp_addr
cmd valud = %s
lge,log_buffer_phy_addr
lge,log_buffer_size
lge,sbl_delta_time
lge,lk_delta_time
model.name
bootcable.type
fakebattery
lge.bootreasoncode
lge.hreset
dic_rev_id=%d
lge.dic_rev
[CCAudit] get_cc_mode_status() failed!
webdload status:%d
target_selectmode_init
%s: should be implemented
[KSwitch] factory reset disabled, Do not go to handle_factory_reset_mode()
factory_reset_image
factory_reset_1st_line_image
factory_reset_2nd_line_image
lcd_break_main_image
lcd_break_cancel_image
lcd_break_guide_image
LCDBREAK_MODE Canceled
LCDBREAK_MODE ON
LCDBREAK_MODE OFF
androidboot.lge.lcdbreak_mode
imei_main_image
imei_guide_image
%s: selectmode_get_mode()=%d
SM_FACTORY_RESET start
SM_LCDBREAK_MODE start
downloadmode
SM_LAF_DOWNLOAD start
SM_FASTBOOT_DL start
factory_reset_no_2nd_image
factory_reset_yes_2nd_image
factory_reset_no_1st_image
factory_reset_yes_1st_image
lcd_break_ok_image
lcd_break_dontshow_image
lcd_break_on_image
lcd_break_off_image
target_home_key
webdload flag set.
sniff flag set.
if flashing complete, add the dlcomplete property.
androidboot.dlcomplete
do not enter dload mode.
detect the volume up key + USB.
reboot reason is the laf boot.
[DDO] Enter laf mode
not enter laf mode after factory reset or mode reset for factory download.
detected the 910K USB cable.
platform_init()
platform/msm8994/platform.c
(ptn_entry.start & (MB-1)) == 0
usb_iface_clk
failed to set usb_iface_clk ret = %d
platform/msm8994/acpuclock.c
usb_core_clk
failed to set usb_core_clk ret = %d
failed to set usb_iface_clk after async ret = %d
usb_phy_cfg_ahb2phy_clk
failed to enable usb_phy_cfg_ahb2phy_clk = %d
sdc%u_iface_clk
failed to set sdc%u_iface_clk ret = %d
sdc%u_core_clk
sdc frequency (%u) is not supported
failed to set sdc%u_core_clk ret = %d
uart%u_iface_clk
uart%u_core_clk
failed to set uart%u_iface_clk ret = %d
failed to set uart%u_core_clk ret = %d
Unsupported CE instance: %u
usb30_iface_clk
failed to set usb30_iface_clk. ret = %d
usb30_master_clk
failed to set usb30_master_clk. ret = %d
usb30_phy_aux_clk
failed to set usb30_phy_aux_clk. ret = %d
usb30_mock_utmi_clk
failed to set usb30_mock_utmi_clk ret = %d
usb30_sleep_clk
failed to set usb30_sleep_clk ret = %d
usb30_pipe_clk
failed to set usb30_pipe_clk. ret = %d
MDP GDSC already enabled
mdp_ahb_clk
failed to set mdp_ahb_clk ret = %d
mdss_mdp_clk_src
failed to set mdp_clk_src ret = %d
mdss_vsync_clk
failed to set mdss vsync clk ret = %d
mdss_mdp_clk
failed to set mdp_clk ret = %d
mmss_mmssnoc_axi_clk
failed to set mmssnoc_axi_clk ret = %d
mmss_s0_axi_clk
failed to set mmss_s0_axi_clk ret = %d
mdss_axi_clk
failed to set mdss_axi_clk ret = %d
mdss_esc0_clk
failed to set esc0_clk ret = %d
mdss_esc1_clk
failed to set esc1_clk ret = %d
hdmi_ahb_clk
failed to set hdmi_ahb_clk ret = %d
hdmi_core_clk
failed to set hdmi_core_clk ret = %d
hdmi_extp_clk
failed to set hdmi_extp_clk ret = %d
sdc1_iface_clk
sdc1_core_clk
sdc2_iface_clk
sdc2_core_clk
uart2_iface_clk
uart2_core_clk
usb2b_phy_sleep_clk
usb30_phy_reset
mdss_mdp_lut_clk
mmss_misc_ahb_clk
edp_pixel_clk
edp_link_clk
edp_aux_clk
gcc_blsp1_ahb_clk
gcc_blsp2_ahb_clk
gcc_blsp2_qup5_i2c_apps_clk
mdss_extpclk_clk
extpclk_clk_src
mdss_hdmi_clk
hdmi_clk_src
mdss_hdmi_ahb_clk
gcc_blsp1_qup6_i2c_apps_clk
mdss_edppixel_clk
mdss_edplink_clk
edppixel_clk_src
edplink_clk_src
mdss_edpaux_clk
edpaux_clk_src
mdp_axi_clk_src
vsync_clk_src
dsi_esc1_clk_src
dsi_esc0_clk_src
usb30_phy_aux_clk_src
usb30_mock_utmi_clk_src
usb30_master_clk_src
sys_noc_usb30_axi_clk
gcc_sdcc2_ahb_clk
gcc_sdcc2_apps_clk
sdc2_clk
gcc_sdcc1_ahb_clk
gcc_sdcc1_apps_clk
sdc1_clk
gcc_usb_hs_ahb_clk
gcc_usb_hs_system_clk
gcc_blsp1_uart2_apps_clk
gpll4_clk_src
gpll0_clk_src
cxo_clk_src
it's ID is not supported = %d
platform/msm8994/gpio.c
HALT: reboot into dload mode...
HALT: reboot_device failed
HALT: set_download_mode not supported
HALT: spinning forever...
smem_write_alloc_entry: len does not aligned
smem_write_alloc_entry: type is out of range
smem_write_alloc_entry: smem does not allocated
smem_write_alloc_entry: size does not matched
ERROR: Unknown smem ram ptable version: %u
platform/msm_shared/smem_ptable.c
Failed to read ptable hdr (%d)
smem_ptable.len <= SMEM_PTABLE_MAX_PARTS
Unknown ptable version (%d)
Failed to read ptable (%d)
smem ptable found: ver: %d len: %d
ERROR: Wrong smem_ram_ptable version: %u
modem_st1
modem_st2
GPT Header size is too small
GPT Header size is too large
Header crc mismatch crc_val = %u with crc_val_org = %u
GPT first usable LBA mismatch
Invalid first_usable_lba
Invalid last_usable_lba
Invalid parition entry size
Invalid maximum partition count
Failed to Allocate memory to read partition table
Starting LBA mismatch
GPT: Could not read primary gpt from mmc
Partition entires crc mismatch crc_val= %u with crc_val_org= %u
GPT: FAILED to write the partition entry array
MBR signature does not match.
Error allocating memory while reading partition table
Could not read partition from mmc
get_gpt_crc_header gpt
GPT: header_crc (before) = %X
GPT: header_crc (after) = %X
platform/msm_shared/partition_parser.c
partition_entries
MMC Boot: MBR read failed!
GPT: (WARNING) Primary signature invalid
card_size_sec > 0
GPT: Could not read backup gpt from mmc
GPT: Primary and backup signatures invalid
partition_count < NUM_PARTITIONS
GPT: mmc read card failed reading partition entries.
MMC Boot: GPT read failed!
Error reading the partition table info
NULL partition
Failed to write mbr partition
Failed to write EBR block to sector 0x%X
Failed to re-read mbr partition.
GPT: Primary signature invalid cannot write GPT
GPT: Backup signature invalid cannot write GPT
Failed to erase the eMMC card
Failed to write Protective MBR
Failed to write GPT header
Failed to write GPT backup header
GPT: Could not write GPT Partition entries array
Re-reading the GPT Partition Table
GPT: Partition Table written
Re-Flash all the partitions
Failed to write MBR block to mmc.
MBR written to mmc successfully
Writing MBR partition
Writing GPT partition
Invalid partition name passed
Error unable to find partition : [%s]
Could not read primary gpt header from mmc
get backup gpt position : %lld
tombstones
EP%d/%s FAIL nfo=%x pg0=%x
Entering test mode for TST_PKT
Entering test mode for SE0-NAK
platform/msm_shared/hsusb.c
allocate USB item fail ept%d
 %s queue
td count = %d
*UNKNOWN*
-- reset --
-- portchange --
<UEI %x>
STALL %s %d %d %d %d %d
USB init ept @ %p
only one gadget supported
udc_start()
udc cannot start before init
udc has no gadget registered
GET_STATUS
CLEAR_FEATURE
SET_FEATURE
SET_ADDRESS
GET_DESCRIPTOR
SET_DESCRIPTOR
GET_CONFIGURATION
SET_CONFIGURATION
GET_INTERFACE
SET_INTERFACE
bad bs id: %u, max: %u
platform/msm_shared/boot_stats.c
%s unimplemented
platform/msm_shared/qgic_common.c
vector < NR_IRQS
Invalid interrupt type change requested
gic_platform_fiq
-platform/msm_shared/rpm-ipc.c
Clock enable failure
Received ERROR ACK
platform/msm_shared/rpm-smd.c
smd_data
smd_read
%s: DTR is off
platform/msm_shared/smd.c
%s: len is greater than fifo sz
%s: channel is not in OPEN state
ch->port_info
smd_channel_alloc_entry
Waiting for the RPM to populate smd channel table
ERROR reading smem channel alloc tbl
Apps timed out waiting for RPM-->APPS channel entry
Channel alloc freed
smd_write
Error: sdhci reset failed for: %x
Error: Invalid UHS mode: %x
platform/msm_shared/sdhci.c
Bus width is invalid: %u
cmd->data.data_ptr
IS_CACHE_LINE_ALIGNED(cmd->data.data_ptr)
Error: CMD or DAT lines were never freed
Invalid response type for the command
Error allocating memory
Error: Command never completed
Error: Transfer never completed
Error: Command timeout error
Error: Command CRC error
Error: CMD end bit error
Error: Command Index error
Error: DATA time out error
Error: DATA CRC error
Error: DATA end bit error
Error: Current limit error
Error: Auto CMD12 error
Error: ADMA error
sdhci_msm_execute_tuning
sdhci_msm_init_dll
sdhci_msm_config_dll
%s: clk_out_en timed out: %08x
%s: Failed to get DLL lock: 0x%08x
platform/msm_shared/sdhci_msm.c
tuning_data
Error: Calibration done in CDC status not set
CDC error set during calibration: %x
Error: DLL lock for hs400 operation is not set
[FS] tuned_phase_cnt: %d tuned_phases = [
WARNING: All phase passed.The selected phase may not be optimal
Failed in selecting the tuning phase
[FS] %s: Tuned Phase: 0x%08x
[FS] %s: READ CDR_PHASE(0x%x)
Failed to get tuned phase
[FS] %s: tuning retrying > CDR_PHASE(0x%x)
[FS] %s: tuning retried > CDR_PHASE(0x%x)
mmc_set_hs400_mode
Failed Sending CMD55
Attempting to read or write beyond the Device capacity
The misaligned address did not match the block length used
The transferred bytes does not match the block length
Attempt to program a write protected block
Device error occurred, which is not related to the host command
A generic Device error
MMC card is not in TRAN state
Failed to send stop command
platform/msm_shared/mmc_sdhci.c
card->ext_csd
CMD6 send failed
Get card status failed
Switch cmd failed. Card not in tran state %x
Switch cmd failed. Switch Error.
Switch cmd failed
Failure to set DDR mode for Card(RCA:%x)
Failure to set wide bus for Card(RCA:%x)
Switch cmd returned failure %d
Tuning for hs200 failed
Failed to switch partition to type: %u
Bus width is not 8-bit, cannot switch to hs400: %u
Failure Setting HS200 mode %s   %d
Error adjusting interface speed!:%s %d
Failure setting DDR mode:%s %d
Switch cmd returned failure %s  %d
Tuning for hs400 failed
The response for CMD8 does not match the supplied value
Error: CMD8 response timed out
Failed sending App command
Failure sending ACMD41
Error: ACMD41 response timed out
Error allocating mmc device
Error Initializing MMC host : %u
Failure resetting MMC cards!
Failed to initialize SD card
Failed to set HS for SD card
Error adjusting interface speed!
Failure getting card's ExtCSD information!
Failed to set bus width for host controller
Failure to set HS400 mode for Card(RCA:%x)
Failure to set HS200 mode for Card(RCA:%x)
SDHC Running in High Speed mode
Failure to enalbe HS mode for Card(RCA:%x)
Failed to set bus width for the card
Failed to enable RST_n_FUNCTION
Failed detecting MMC/SDC @ slot%d
Done initialization of the card
Failure getting OCR response from MMC Card
MMC card failed to respond, try for SD card
Failure getting card's CID number!
Failure getting card's RCA!
Failure getting card's CSD information!
Failure selecting the Card with RCA: %x
Failure getting card's SCR register
Failed to get SSR from the card
SDHC Running in HS400 mode
SDHC Running in HS200 mode
SDHC Running in DDR mode
Card has busy status set. Init did not complete
Requested length is less than min erase group size
The erase group overlaps the max requested for erase
Address for CMD35 is out of range
Address for CMD36 is out of range
Failed to get card status after erase
Write Protect set for the region, only partial space was erased
Card status check timed out after sending erase command
Failed to send erase grp start address
Failed to send erase grp end address
Failed to erase the specified partition
Failed to get status of write protect bits
Failed to Disable PERM WP
Failed to read ext csd for the card
Power on protection is disabled, cannot be set
Length is less than min WP size, WP was not set
Failed to set power on WP for user
Address for CMD28/29 is out of range
Failed to get card status afterapplying write protect
Card status timed out after sending write protect command
card deselect error: %s
card sleep error: %s
Set block count failed: %s
Failed to get card status after rpmb operations
Card status check timed out after rpmb operations
mmc_put_card_to_sleep
platform/msm_shared/mmc_wrapper.c
!(data_addr % block_size)
Failed Writing block @ %x
Error: UFS write failed writing to block: %llu
!(data_len % block_size)
Failed Reading block @ %x
Error: UFS read failed writing to block: %llu
erasing 0x%x:0x%x
Erase Fail: Erase size: %u is bigger than scratch region
failed to erase the partition: %x
!(addr % block_size)
!(len % block_size)
Erasing card: 0x%x:0x%x
SDHCI unit erase not required
MMC erase failed
mmc_erase_card: UFS erase failed
max_luns
Error reading the partition table info for lun %d
Failure to WP UFS partition
Alert!! clock list not defined!
Alert!! Requested clock "%s" is not supported!
Can't find clock with id: %s
Clock set rate failed.
Clock enable failed.
platform/msm_shared/clock_lib2.c
rclk->set_rate
platform/msm_shared/board.c
Unsupported board info format %u.%u
platform/msm_shared/spmi.c
chnl_tbl
PMIC arbiter error, no command provided
SPMI write command failure:             cmd_id = %u, error = %u
SPMI read command failure:          cmd_id = %u, error = %u
Unexpected interrupt : val %u
Size exceeds max size for a descriptor(0x7FFF)
platform/msm_shared/bam.c
!((uint32_t)PA((addr_t)bam->pipe[pipe_num].fifo.head & 0x7))
ispow2(bam->pipe[pipe_num].fifo.size)
Max allowed desc is one less than the fifo length
Wrong params for BAM transfer
Please allocate the FIFO for the BAM pipe %d
Can't lock and unlock in the same desc
EOT flag set on the CMD desc
len of the desc exceeds max length %d > %d
Data transfer exceeds desc fifo length.
Nand Flash error. Status = %d
Could not read bad block value
NAND page read failed. page: %x status %x
Failed to write CW %d for page: %d
NAND Erase error: Block address belongs to bad block: %d
QPIC:NANDc BAM Read FIFO init error
QPIC: NANDc: BAM Write FIFO init error
QPIC:NANDc BAM CMD FIFO init error
Read ID cmd status failed
platform/msm_shared/qpic_nand.c
flash->block_size
flash->page_size
flash->cws_per_page <= QPIC_NAND_MAX_CWS_IN_PAGE
Failed to allocate memory for spare bytes
Failed to allocate memory for bad block table
Failed to allocate memory for page reads or writes
NAND device is not supported: nandid: 0x%xmaker=0x%02x device=0x%02x
nandid: 0x%x maker=0x%02x device=0x%02x page_size=%d
spare_size=%d block_size=%d num_blocks=%d
flash_ptable == NULL && new_ptable != NULL
qpic_nand_read: buffer = null
qpic_nand_read: reading page %d failed with %d err
qpic_nand_write: buffer = null
flash_write: write failure @ page %d, block %d
Read request start not at page boundary: %d
flash_read_image: failed (%d errors)
Erase operation failed @ page #%d
flash_write_image: out of space
flash_write_image: image undersized (%d < %d)
flash_write_image: bad block @ %d
flash_write_image: write failure @ page %d (src %d)
flash_write_image: erase failure @ page %d
flash_write_image: restart write @ page %d (src %d)
flash_write_image: success
dev_tree_get_entry_info
ERROR: Unsupported version (%d) in dt node check
platform/msm_shared/dev_tree.c
dt_node_member
dt_node_member->dt_entry_m
ERROR: Couldn't find the suitable DTB!
Out of memory
Tags addresses overlap with aboot addresses.
model does not exist in device tree
qcom,pmic-id
qcom,board-id
qcom,pmic-id(%d) or qcom,board-id(%d) in device tree is not a multiple of (%d %d)
qcom,board-id in device tree is (%d) not a multiple of (%d)
qcom,msm-id
qcom,msm-id entry not found
qcom,msm-id in device tree is (%d) not a multiple of (%d)
board_data
platform_data
pmic_data
dt_entry_array
Best match DTB tags %u/%08x/0x%08x/%x/%x/%x/%x/%x/%x/%x
Using pmic info 0x%0x/0x%x/0x%x/0x%0x for device 0x%0x/0x%x/0x%x/0x%0x
DTB offset is incorrect, kernel image does not have appended DTB
No DTB found for the board: <%u %u 0x%x>, 0x%0x/0x%x/0x%x/0x%0x
ERROR: Bad magic in device tree table
ERROR: Unsupported version (%d) in DT table
ERROR: Bad parameter passed to %s
DTB Total entry: %d, DTB version: %d
Using DTB entry 0x%08x/%08x/0x%08x/%u for device 0x%08x/%08x/0x%08x/%u
ERROR: Unable to find suitable device tree for device (%u/0x%08x/0x%08x/%u)
Failed to add the memory information addr: %d
Failed to add the memory information size: %d
Could not find memory node.
#address-cells
Using default #addr_cell_size: %u
Error finding the #address-cells property
#size-cells
Using default #size_cell_size: %u
Error finding the #size-cells property
Could not find #address-cells and #size-cells properties: ret %d
ERROR: Could not set prop reg for memory node
ERROR: Could not append prop reg for memory node
Invalid device tree header
Failed to move/resize dtb buffer: %d
ERROR: Cannot update memory node
Could not find chosen node.
bootargs
ERROR: Cannot update chosen node [bootargs]
linux,initrd-start
ERROR: Cannot update chosen node [linux,initrd-start]
linux,initrd-end
ERROR: Cannot update chosen node [linux,initrd-end]
%s:SCM call is not supported
ASSERT FAILED at (%s:%d): %s
platform/msm_shared/scm.c
indir_arg
SCM call: 0x%x failed with :%x
Secure Config failed
ssd_image_is_encrypted call failed
ret == 0
decrypt_scm_v2: failed status %d
decrypt_scm_v2: case default: failed status %d
Successfully loaded the keystore
Loading keystore failed status %d
scm_call failed
Failed to Save kernel hash
in_buf != NULL
out_buf != NULL
Failed to call Cipher DIP SCM
Failed in Cipher DIP SCM call
Failed to call SCM_SVC_FUSE.SCM_QFPROM_READ_ROW_ID SCM
Jumping to kernel via monitor
Failed to jump to kernel
Secure canary SCM failed: %x
scm_call for random failed !!!
Failed to set XPU violations as fatal errors: %u
Configured XPU violations to be fatal errors
scm call to check secure boot fuses failed
usb30_phy_com_reset
platform/msm_shared/qmp_usb30_phy.c
usb2b_clk
usb_pipe_clk
Failed to assert usb2b_phy_clk
Failed to assert phy_com_clk
Failed to assert phy_clk
Failed to assert usb_pipe_clk
Failed to deassert usb_pipe_clk
Failed to deassert phy_clk
Failed to deassert phy_com_clk
Failed to deassert usb2b_phy_clk
QMP phy initialization failed, fallback to HighSpeed only mode
ERROR: Boot Invalid, RSA_KEY is NULL!
ERROR: Calloc failed during verification
ERROR: Image Invalid, X509_Certificate is NULL!
ERROR: Boot Invalid, PUB_KEY is NULL!
ERROR: Image Invalid! signature check failed! ret %d
ERROR: Image Invalid! Please use another image!
[do_sha_update returns error from crypto_send_data
do_sha_update returns error from crypto_get_digest
do_sha_update returns error %d
crypto_sha256 returns error %d
Could not allocate fifo buffer
Could not allocate output dump buffer
CRYPTO: BAM Read FIFO init error
CRYPTO: BAM Write FIFO init error
CRYPTO: BAM init error
crypto_set_sha_ctx invalid auth algorithm
Authentication alg config failed.
Data start not aligned at burst length.
Crypto send data failed
crypto_get_digest status error
status = %x status2 = %x
HW doesn't support READs > 256 bytes
dev_addr is NULL, that means i2c_qup_init failed...
QUP: I2C status flags :0x%x
QUP: QUP status flags :0x%x
platform/msm_shared/i2c_qup.c
QUP Busy:Trying to recover
I2C slave addr:0x%x not connected
QUP data xfer error %d
Error waiting for write ready
Failed to enable %s clock
Failed to get %s
Failed to enable %s
mdss_smp_setup
Invalid PPB0_CONFIG offset
ERROR: %s: Out of SMP's, cnt=%d!
platform/msm_shared/mdp5.c
Config LVDS_PANEL.
Config MIPI_VIDEO_PANEL.
Config MIPI_CMD_PANEL.
Config LCDC PANEL.
Config HDMI PANEL.
Config EDP PANEL.
Turn on LVDS PANEL.
Turn on MIPI_VIDEO_PANEL.
Turn on MIPI_CMD_PANEL.
Turn on LCDC PANEL.
Turn on HDMI PANEL.
Turn on EDP PANEL.
Turn off LVDS PANEL.
Turn off MIPI_VIDEO_PANEL.
Turn off MIPI_CMD_PANEL.
Turn off LCDC PANEL.
Turn off EDP PANEL.
Continuous splash enabled, keeping panel alive.
Panel CMD: Did not recieve video mode done interrupt
Panel CMD: command mode dma test failed
[RSP_NVM]cnt : %d, data : %x, ntohl(data) %x
[JDI] OTP written count [0x%X]
[JDI] OTP rewriting cmds sent and device will be rebooted
[JDI] cmd tx error for OTP written count
[JDI] cmd rx error for OTP written count
[JDI] OTP rewrite cmds sending failed
[JDI] panel version [0x%X]
[JDI] cmd tx error for panel version check
[JDI] cmd rx error for panel version check
[SIC] vpnl(ldo22) voltage = %d
[SIC] change register value[0x%02X]
[SIC] panel version [0x%X]
[SIC] rev %d[0x%x]
[SIC] cmd tx error for panel version check
[SIC] cmd rx error for panel version check
jdi write1 fail
jdi read fail
jdi read_rx fail
jdi write2 fail
jdi panel read: 0x%X, jdi_panel_cut = %d
rsp write1 fail
rsp write2 fail
rsp write3 fail
rsp write4 fail
rsp read_rx fail
rsp nvm was written.
rsp nvm didn't be written.
rsp panel read: 0x%X
dsi host init error
pre_init_func error
dsi panel init error
unsupported dst format
Video lane test failed
Video lane tested successfully
DSI1 PHY REGULATOR NOT READY,exceeded polling TIMEOUT!
mdss_hdmi_audio_acr_setup
mdss_hdmi_video_setup
mdss_hdmi_is_audio_freq_supported
mdss_hdmi_audio_playback
hdmi regulator control enable failed
hdmi gpio control enable failed
%s: Timeout reading EDID
%s: NACK reading EDID
%s: EDID read successful
scan Info (pt|it|ce): (%d|%d|%d)
%s: Error audio buffer alloc
%s: invalid adb length
%s: video format %d not supported
%s: total v=%d or h=%d is larger than supported
%s: end_h=%d or start_h=%d is larger than supported
%s: end_v=%d or start_v=%d is larger than supported
%s: pixel clk %d not supported
hdmi resolution %dx%d@p%dHz (%d)
UFS dme_read_unit_desc failed for RPMB Partition
UFS dme_read_geo_desc failed for RPMB Partition
UFS erase failed
UFS_IS 0x%x
------Host controller register dump ---------
UFS_UECPA 0x%x
UFS_UECDL 0x%x
UFS_UECN 0x%x
UFS_UECT 0x%x
UFS_UECDME 0x%x
UFS_HCS 0x%x
-----------End--------------------------------
UFS read failed.
UFS write failed.
UFS get serial number failed.
UFS uic_init failed
UFS dme_send_nop_query failed
UFS dme_set_fdeviceinit failed
UFS ucs_scsi_send_inquiry failed
dme_read_dev_desc read failed
UFS dme_read_unit_desc failed
UFS dev_init failed
UFS init success
utp_poll_utrd_complete
utp_enqueue_upiu
utp_process_req_completion
utp_get_prdt_len
utp_fill_req_upiu
%s:%d UTRD/ UTMRD processed signalled and the wait queue is empty
platform/msm_shared/utp.c
%s:%d Event signal failed.
%s:%d UTP command never completed.
%s:%d Data length exceeds for a single upiu transfer.
%s:%d Unable to allocate request upiu
%s:%d Alignment and length check failed for data tranfer command.
%s:%d Transaction timeout after polling %d times
%s:%d Command failed. command type = %x
%s:%d Command failed. command = %x
%s:%d Unable to find a free slot for transaction.
utp_get_door_bell_bit
utp_enqueue_utrd
Mutex acquire failed.
Check UCRDY failed.
Failed to send the UIC cmd.
UFS link is not initialized.
Sense Key: 0x%x
NO SENSE: No information available to be reported
RECOVERED ERROR: Additional sense buffer bytes indicate further details
NOT READY: Logical Unit Not Ready and cannot be accessed at this time
MEDIUM ERROR: Last command unsuccessful due to non-recoverable error condition
HARDWARE ERROR: Target detected a non-recoverable hardware error
ILLEGAL REQUEST: Illegal parameter in the command descriptor block in the command sent
UNIT ATTENTION: Unit has been reset/unexpectedly power on/removable media has changed
DATA PROTECT: Read/Write operation attempted on a block that is protected from this operation
BLANK CHECK: Target encountered blank or unformatted media while reading or writing
VENDOR SPECIFIC: Vendor specific error or exceptional conditions
ABORTED COMMAND: Target aborted the execution of the command
VOLUME OVERFLOW: Buffered peripheral device has reached the end of partition
MISCOMPARE: Source data did not match the data read from the media
INVALID sense key
ucs_do_scsi_cmd: enqueue failed
Data segment length: %x
SCSI Request failed and we have sense data
Sense Data Length/Response Code: 0x%x/0x%x
Sense Buffer (HEX): 0x%x 0x%x 0x%x 0x%x
ucs_do_scsi_cmd failed status = %x
platform/msm_shared/ucs.c
resp_buf
resp_len
RPMB request transfer size %llu greater than max transfer size %llu
%s:%d ucs_do_scsi_rpmb_read: failed
ucs_do_scsi_read: failed
ucs_do_scsi_write: failed
Failed to send SCSI unmap command
Failed to send SCSI inquiry
----Sense buffer----
----end of buffer---
buf[%d] = %x
ucs_do_request_sense: failed
UFS error: System Bus Fatal Error
platform/msm_shared/ufs_hci.c
UFS error: UTP Error
UFS error: HCFES:0x%x DFES:0x%x
UFS error: UE.
UIC non-fatal error. IS: 0x%x UECPA: 0x%x UECDL: 0x%x
UIC non-fatal error handled. Pending interrupt mask: 0x%x
UIC fatal error.
Unknown irq.
Failed to allocate utrd list.
Failed to allocate memory for Task mamagement request list.
Failed to enable UFS host controller.
dme_send_nop_query
dme_read_device_desc
dme_set_fpoweronwpen
%s:%d Opcode from respose does not match with Opcode from request
%s:%d UPIU Response is not SUCCESS
%s:%d Insufficient buffer space.
%s:%d UPIU query opcode not supported.
%s:%d DME_LINKSTARTUP command failed.
%s:%d DME_GET command failed.
%s:%d DME Purge Enable failed
%s:%d Purge enable status: %u
%s:%d DME Purge Status Read failed
%s:%d Purge operation stopped prematurely
%s:%d Purge operation failed due to logical unit queue not empty
%s:%d Purge operation general failure
%s:%d Purge operation timed out after checking status %d times
%s:%d DME Power On Write Read Request failed
Power on Write Protect request failed. Retrying again.
%s:%d DME Power On Write Set Request failed
Power on Write Protect status: %u
%s:%d DME Device Init Read request failed
%s:%d DME Device Init Set request failed
%s:%d DME Read String Descriptor request failed
%s:%d DME Read String Descriptor is length 0
%s:%d DME Read Device Descriptor request failed
%s:%d Invalid string descriptor length
%s:%d DME Read Geometry Descriptor request failed
%s:%d DME Read Unit Descriptor request failed
%s:%d DME Read Config Descriptor request failed
%s:%d Sending nop out failed.
%s:%d Command failed. command = %x. Invalid response.
utp_build_query_req_upiu
dme_read_unit_desc
dme_set_fdeviceinit
dme_get_query_resp
dme_read_string_desc
dme_parse_serial_no
%x.sdhci
%x.ufshc
ERROR: Unexpected boot_device val=%x
platform/msm_shared/boot_device.c
platform/msm_shared/usb30_dwc.c
DWC_EP_PHY_TO_INDEX(ep_phy_num) < DWC_MAX_NUM_OF_EP
ep != NULL
dwc core = 0x%x
ctrl_state = %d, %s
EP ( index = %d) status:
phy_num      = %d
usb ep num   = %d
dir          = %d
type         = %d
resource_idx = %d
trb_queued   = %d
bytes_queued = %d
state        = %d, %s
ep req len   = %d trbctl = %d
ep->trb_queued == 0
 ERROR: Enough TRBs are not available to setup transfer
 ERROR: Increase TRB chain for the ep.
 ERROR: phy_ep_num = %d xfer len = %d
 Attempting START_TRANSFER in invalid state: %s. .......
index < DWC_MAX_NUM_OF_EP
EP event (0x%x) details
event_id         = %d, %s
ep_phy_num       = %d
event_ctrl_stage = %d, %s
event_status     = %d
xfer_res_idx     = %d
event_param      = %d
event_cmd_type   = %d, %s
DWC_EVENT_EP_CMD_COMPLETE
DWC_EVENT_EP_XFER_NOT_READY
DWC_EVENT_EP_XFER_IN_PROGRESS
DWC_EVENT_EP_XFER_COMPLETE
DWC_EVENT_DEVICE_EVENT_ID_VENDOR_DEVICE_TEST_LMP
DWC_EVENT_DEVICE_EVENT_ID_BUFFER_OVERFLOW
DWC_EVENT_DEVICE_EVENT_ID_GENERIC_CMD_COMPLETE
DWC_EVENT_DEVICE_EVENT_ID_ERRATIC_ERROR
DWC_EVENT_DEVICE_EVENT_ID_SOF
DWC_EVENT_DEVICE_EVENT_ID_SUSPEND_ENTRY
DWC_EVENT_DEVICE_EVENT_ID_HIBER
DWC_EVENT_DEVICE_EVENT_ID_WAKEUP
DWC_EVENT_DEVICE_EVENT_ID_USB_LINK_STATUS_CHANGE
DWC_EVENT_DEVICE_EVENT_ID_CONNECT_DONE
DWC_EVENT_DEVICE_EVENT_ID_USB_RESET
DWC_EVENT_DEVICE_EVENT_ID_DISCONNECT
EP_FSM_INIT
EP_FSM_SETUP
EP_FSM_CTRL_DATA
EP_FSM_WAIT_FOR_HOST_2
EP_FSM_WAIT_FOR_HOST_3
EP_FSM_STATUS_2
EP_FSM_STATUS_3
EP_FSM_STALL
EP_STATE_INIT
EP_STATE_INACTIVE
EP_STATE_START_TRANSFER
EP_STATE_XFER_IN_PROG
ON
L1
L2
DISCONNECTED
EARLY_SUSPEND
RESET
RESUME
U0
U1
U2
U3
SS_DIS
RX_DET
SS_INACT
POLL
RECOV
HRESET
CMPLY
LPBK
RESUME_RESET
DSTS_CONNECTSPD_HS
DSTS_CONNECTSPD_FS1
DSTS_CONNECTSPD_LS
DSTS_CONNECTSPD_SS
DEPCMD_CMD_SET_EP_CONF
DEPCMD_CMD_SET_TR_CONF
DEPCMD_CMD_GET_EP_STATE
DEPCMD_CMD_SET_STALL
DEPCMD_CMD_CLEAR_STALL
DEPCMD_CMD_START_TRANSFER
DEPCMD_CMD_UPDATE_TRANSFER
DEPCMD_CMD_END_TRANSFER
DEPCMD_CMD_START_NEW_CONF
dev->setup_pkt
num_of_trb
Unhandled DEVICE_EVENT: %s in %s
ep->state == EP_STATE_START_TRANSFER
event_status == 0
ep_phy_num == 0
ep->state == EP_STATE_XFER_IN_PROG
 Ignore the unexpected EP event: %s
event_ctrl_stage == CONTROL_DATA_REQUEST
ep_phy_num == 1
Invalid ctrl_state = %d
 EP state is invalid. Asserting...
dev->ep[index].trb
platform/msm_shared/usb30_dwc_hw.c
(td_addr_low & 0xF) == 0
 device command failed.
count >= 4
 Event buffer is full. Need to increase size.
platform/msm_shared/usb30_udc.c
udc_handle_setup: DEVICE_WRITE : SET_CONFIGURATION malloc failed for ep
 CONFIG = %d not supported
STALL. Unsupported setup req: %s %d %d %d %d %d
udc_dev->ctrl_rx_buf
udc_dev->ctrl_tx_buf
dwc_config.event_buf
only one gadget supported
ept->trb
platform/msm_shared/usb30_wrapper.c
r0  0x%08x r1  0x%08x r2  0x%08x r3  0x%08x
r4  0x%08x r5  0x%08x r6  0x%08x r7  0x%08x
r8  0x%08x r9  0x%08x r10 0x%08x r11 0x%08x
r12 0x%08x usp 0x%08x ulr 0x%08x pc  0x%08x
spsr 0x%08x
%c%s r13 0x%08x r14 0x%08x
bottom of stack at 0x%08x:
unhandled syscall, halting
undefined abort, halting
data abort, halting
prefetch abort, halting
welcome to lk
bootstrap2
mutex_acquire: thread %p (%s) tried to acquire mutex %p it already owns.
mutex_acquire_timeout: thread %p (%s) tried to acquire mutex %p it already owns.
mutex_release: thread %p (%s) tried to release mutex %p it doesn't own. owned by %p (%s)
somehow fell through thread_exit()
bootstrap
dump_thread: t %p (%s)
    state %d, priority %d, remaining quantum %d, critical section %d
    stack %p, stack_size %zd
    entry %p, arg %p
    wait queue %p, wait queue ret %d
timer %p already in list
starting app %s
GPT modified : %d
Authenticating %s image (%d): start
Authenticating image (%d): start
boot_into_recovery : %d, boot_into_laf : %d, get_qem() : %d
/factory
/recovery
Authenticating boot image: done return value = %d
[CCAutdit] Authenticating boot image: Success
[CCAutdit] Authenticating boot image: Fail
androidboot.verifiedbootstate
verifiedboot_yellow
verifiedboot_orange
Device is tampered. Asserting..
rebooting the device
    get_unlock_ability: %d
recoveryfs
 lge.dsv_id=TI
 lge.dsv_id=SM
 lge.dsv_id=DW
 lge.pinit_fail=1
 androidboot.bootdevice=
app/aboot/aboot.c
boot_dev_buf
 androidboot.serialno=
 androidboot.mode=
 androidboot.alarmboot=true
 androidboot.mode=chargerlogo
 maxcpus=4 boot_cpus=0-3
 androidboot.authorized_kernel=true
 lge.signed_image=true
 androidboot.baseband=apq
 androidboot.baseband=msm
 androidboot.baseband=csfb
 androidboot.baseband=svlte2a
 androidboot.baseband=mdm
 androidboot.baseband=mdm2
 androidboot.baseband=sglte
 androidboot.baseband=sglte2
 androidboot.baseband=dsda
 androidboot.baseband=dsda2
mdss_mdp
 qpnp-power-on.warm_boot=1
cmdline_final != NULL
quick_lglogo_image
cmdline: %s
cmdline is NULL
[CCAudit] Enter the boot_linux for kernel startup,,,
Updating device tree: start
ERROR: Updating Device Tree Failed
Updating device tree: done
booting linux @ %p, ramdisk @ %p (%d), tags/device tree @ %p
ERROR: Cannot write device info
ERROR: Cannot read device info
Failed to allocate memory for device info struct
ERROR: Partition table not found
ERROR: No boot partition found
ANDROID!
ERROR: Invalid boot image header
ERROR: No recovery partition found
ERROR: Cannot read boot image header
ERROR: Invalid boot image pagesize. Device pagesize: %d, Image pagesize: %d
kernel/ramdisk addresses overlap with aboot addresses.
ERROR: Cannot read boot image
Loading boot image (%d): done
ERROR: Cannot read boot image signature
Loading boot image (%d): start
ERROR: Cannot read kernel image
ERROR: Cannot read ramdisk image
ERROR: Cannot read the Device Tree Table
ERROR: Cannot validate Device Tree Table
ERROR: Getting device tree address failed
ERROR: Cannot read device tree
Device tree addresses overlap with aboot addresses.
ANDROID-BOOT!
unlocked
Enter recovery mode. dm-verity mode switches to enforcing mode.
Device is unlocked!
bootselect
Unable to locate /bootselect partition
partition /bootselect doesn't exist
mmc read failure /bootselect %d
Signature: 0x%08x or version: 0x%08x mismatched of /bootselect
[KSwitch] check kill switch feature
[KSwitch] check done (do nothing): valid=%s, flasg=0x%x
kswitch_factory
[KSwitch][%s] factory reset is disabled by kill switch
kswitch_dload
[KSwitch][%s] dload mode is disabled by kill switch
[KSwitch] check done with valid=%s, flasg=0x%x
failed to get ffbm cookie
Unified boot method!
cc mode disabled~!!!
fips_allow_others
fips_panic
cc mode enabled!!!
LGE_DMS - CRC = %d  STAGE= %d
FOTA start recovery
FOTA start boot
androidboot.fota
FOTA m_bFotaMode enable start recovery
Enter minios3 mode
androidboot.xboot
 LGFTM_DOWNLOAD_SD_STATUS = %x!!!!
Enter laf mid mode
androidboot.laf
Enter normal mode
ERROR: No %s partition found
boot from %s partition
try to minios boot but there is no factory_ramdisk image
ERROR: Invalid page size
use_signed_kernel=%d, is_unlocked=%d, is_tampered=%d.
decompress image start
decompress image failed!!!
decompressed image finished.
ERROR: Appended Device Tree Blob not found
persistent
Erase persistent partition
androidboot.ksut_state
Boot image buffer address overlaps with aboot addresses.
Signature read buffer address overlaps with aboot addresses.
unlocked!
    Device already : %s
oem unlock is not allowed
CC mode is enabled. You cannot unlock the bootloader
Erasing userdata and cache
devinfo initialized
reset_device_info called.
set_device_root called.
unlock device to use this command
invalid bootimage header
bootimage: incomplete or not signed
booimage: size is greater than boot image buffer can hold
dtb not found
partition table doesn't exist
unknown partition name
failed to erase partition
device is locked. Cannot erase
cannot erase this partition in unlocked state
Attempt to write partition image.
failed to write partition
image is not a boot image
size too large
flash write failure
MSM8992_PPLUS_TMO_US
size too low
buffer overreads occured due to invalid sparse header
chunk header size mismatch
Invalid block size
Chunk data size exceeds partition size
sparse header size mismatch
Bogus chunk size for chunk type Raw
Bogus size for RAW chunk type
Bogus chunk size for chunk type FILL
Malloc failed for: CHUNK_TYPE_FILL
Chunk data size for fill type exceeds partition size
bogus size for chunk DONT CARE type
Bogus chunk size for chunk type CRC
bogus size for chunk CRC type
integer overflow occured
Unkown chunk type: %x
Unknown chunk type
Wrote %d blocks, expected to write %d blocks
sparse image write failure
device is locked. Cannot flash images
cannot flash this partition in unlocked state
verified partition is modified. dm-verity mode switches to enforcing mode.
system partition not found
update_ubi_vol failed
unknown partition name (%s). Trying updatevol
writing %d bytes to '%s'
partition '%s' updated
Selecting display panel %s
    Device tampered: %s
    Device unlocked: %s
    Charger screen enabled: %s
    Display panel: %s
SPLASH!!
ERROR: splash Partition not found
ERROR: Boot image header invalid
Logo config doesn't match with fb config. Fall back to default logo
ERROR: Cannot read splash image from partition
ERROR: splash Partition table not found
ERROR: splash Partition invalid
ERROR: Cannot read splash image header
ERROR: Splash image header invalid
Logo config doesn't match with fb config. Fall back default logo
@%d:Invalid logo header readsize:%u exceeds ptn_size:%u
serialno
Invalid partition index
Invalid partition name %s
     0x%llx
partition size name truncated
partition type name truncated
max-download-size
charger-screen-enabled
display-panel
version-bootloader
version-baseband
%d : ftm_get_item.
%s : color.
lge.device_color
Enter Recovery mode & Do Factory reset
Enter Minios mode & Skip Factory reset
androidboot.bl_unlock_complete
LGFTM_LAF_MID_REBOOT_FLAG is %d
androidboot.fota_reboot
FOTA_SILENT
system image verification is failed.
system_errlogo
CHARGERLOGO: boot_into_chargerlogo = 1
lge.rsp_nvm
error in emmc_recovery_init
[LAF] boot_into_laf = %d
persistent partition wp failed
persistent partition wp enabled
[LAF] laf cmd = %s
sniff_buffer != NULL
laf cmd = SNIFF
androidboot.sniff_ssid
androidboot.sniff_args
ERROR: Could not do normal boot. Reverting to fastboot mode.
CHARGERLOGO: boot_into_chargerlogo = 0
Writing MMC failed
reboot-bootloader
oem lock
flashing lock
oem get_unlock_ability
flashing get_unlock_ability
oem unlock
flashing unlock
on_kswitch_flag
usb_write() queue failed
usb_write() transaction failed
usb_read() queue failed
usb_read() transaction failed
app/aboot/fastboot.c
usb_write() queue failed. r = %d
usb_write() transaction failed. txn_status = %d
usb_write(): DONE: ERROR: len = %d
usb_read() queue failed. r = %d
usb_read() transaction failed. txn_status = %d
usb_read(): DONE: ERROR: len = %d
fastboot: processing commands
Could not allocate memory for fastboot buffer
fastboot: %s
unknown reason
unknown command
fastboot: oops!
data too large
DATA%08x
fastboot_init()
download:
fastboot
CDSSIKOO
partition %s doesn't exist
mmc write failure %s %d
%s: Partition not found
mmc read failure %s %d
ERROR: No misc partition found
ERROR: Cannot read recovery_header
ERROR: flash write fail!
ERROR: No cache partition found
MSM-RADIO-UPDATE
ERROR: Cannot read radio image
Partition writen successfully!
ERROR: unable to read shared memory for apps boot info %d
boot flag %x update status %x
Recovery command: %d %s
boot-recovery
radio update success
radio update failed
failed-update
update-radio
start radio update
FOTA partition written successfully!
app/aboot/recovery.c
reset-device-info
root-detect
Write request out of '%s' boundaries
Partition table not found
Writing flash failed
Invalid size argument passed to get_ffbm
Failed to alloc buffer for ffbm cookie
Misc partition not supported for NAND targets.
Invalid string in misc partition
Error reading MISC partition
emmc_get_recvoery_msg error!
recovery
--wipe_data
--wipe_cache
Unexpected recovery command !!!
emmc_set_recvoery_msg error!
emmc_set_recovery_cmd
########################### Fail Get Misc ###########################
dev/fbcon/fbcon.c
unknown framebuffer pixel format
NULL configuration, image cannot be displayed
mdss_edp_panel_power
mdss_dsi_dfps_get_stored_pll_codes
mdss_dsi_dfps_store_pll_codes
LDO control enable failed
%s: panel enable failed
%s: panel disable failed
%s: ldo control disable failed
panel reset failed
dsv ctrl failed
panel reset disable failed
Clock calculation failed
%s: splash partition table not found
ERROR: splash Partition invalid offset
ERROR:splash Partition invalid blocksize
ERROR:splash Partition invalid memory
mmc read splash failure%d
frame_rate=%d failed!
Cannot cal pll codes!
mmc write failed!
Cannot store pll codes!
Backlight %s failed
DSI panel init failed!
Target panel init not found!
Panel_name:%s not found in lookup table
Invalid panel name
Sim_mode not found in lookup table
:disable
#sim-hwte
#sim-swte
0:dsi:0:
qcom,mdss_dsi_sim_cmd_0
qcom,mdss_dsi_sim_cmd
qcom,mdss_dsi_sim_video_0
qcom,mdss_dsi_sim_video
qcom,mdss_dsi_sim_video_1
qcom,mdss_dsi_sim_cmd_1
panel node or dsi ctrl not present
display command line buffer is small
slave node not present in dual dsi case
DISPLAY_2
SIM string NULL but mode is not NONE
#override:
dsi_panel_ctl_base_setup
%s: Unkown panel destination: %d
Not able to calculate posdiv1
Invalid keycode posted: %d
Invalid keycode requested: %d
pm8x41_get_is_cold_boot
LDO pointer is invalid: %p
dev/pmic/pm8x41/pm8x41.c
%s: Warm boot
%s: cold boot
Error in duty cycle and period
%s : failed
qpnp_led_init
qpnp_ibb_enable
qpnp_wled_enable_backlight
%s: wled is not initialized yet
pif_detect=%d, set dimming brightness
fota_lcdoff_flag = %d, set dimming brightness
wled set level failed
wled %sable failed
Invalid string number
qpnp_lab_regulator_set_voltage failed, min_uV %d is less than init volt %d
qpnp_ibb_regulator_set_voltage unable to set voltage (%d %d)
qpnp_ibb_regulator_set_voltage failed, min_uV %d is less than init volt %d
qpnp_ibb_regulator_set_voltage unable to set voltage %d %d
wled config failed
panic (frame %p):
panic (caller %p):
stack smashing detected.
0x%08lx:
%08x %08x %08x %08x |
0x%02hhx
invalid input size
invalid input alignment
0123456789abcdef0123456789ABCDEFphandle
linux,phandle
/aliases
compatible
lib/openssl/crypto/bio/b_print.c
*sbuffer != ((void *)0) || buffer != ((void *)0)
*sbuffer != ((void *)0)
*sbuffer != ((void *)0) || *buffer != ((void *)0)
0123456789ABCDEF
0123456789abcdef
lib/openssl/crypto/cryptlib.c
%s(%d): OpenSSL internal error, assertion failed: %s
pointer != NULL
<<ERROR>>
x509_info
x509_pkey
x509_crl
x509_req
evp_pkey
x509_store
ssl_cert
ssl_session
ssl_sess_cert
ssl_method
debug_malloc
gethostbyname
getservbyname
RSA_blinding
debug_malloc2
ec_pre_comp
lib/openssl/crypto/mem_dbg.c
%ld bytes leaked in %d chunks
lib/openssl/crypto/ex_data.c
lib/openssl/crypto/asn1/a_bitstr.c
lib/openssl/crypto/asn1/a_int.c
'()+,-./:=?
lib/openssl/crypto/asn1/a_mbstr.c
minsize=
maxsize=
lib/openssl/crypto/asn1/a_object.c
<INVALID>
ASN1_TIME
Openssl LK: Removed qsort dependency in ameth_lib.c
lib/openssl/crypto/asn1/ameth_lib.c
lib/openssl/crypto/asn1/asn1_lib.c
address=
 offset=
lib/openssl/crypto/asn1/tasn_enc.c
Openssl LK: removing qsort dependency in tasn_enc
lib/openssl/crypto/asn1/tasn_dec.c
lib/openssl/crypto/asn1/tasn_new.c
ASN1_SET_ANY
ASN1_SEQUENCE_ANY
ASN1_OCTET_STRING_NDEF
ASN1_FBOOLEAN
ASN1_TBOOLEAN
ASN1_BOOLEAN
DIRECTORYSTRING
DISPLAYTEXT
ASN1_PRINTABLE
ASN1_SEQUENCE
ASN1_ANY
ASN1_BMPSTRING
ASN1_UNIVERSALSTRING
ASN1_VISIBLESTRING
ASN1_GENERALIZEDTIME
ASN1_UTCTIME
ASN1_GENERALSTRING
ASN1_IA5STRING
ASN1_T61STRING
ASN1_PRINTABLESTRING
ASN1_UTF8STRING
ASN1_OBJECT
ASN1_NULL
ASN1_OCTET_STRING
ASN1_BIT_STRING
ASN1_ENUMERATED
ASN1_INTEGER
lib/openssl/crypto/asn1/tasn_utl.c
X509_ALGORS
X509_ALGOR
algorithm
parameter
X509_ATTRIBUTE
value.set
value.single
X509_EXTENSIONS
Extension
X509_EXTENSION
critical
lib/openssl/crypto/asn1/x_long.c
lib/openssl/crypto/asn1/x_name.c
X509_NAME
X509_NAME_INTERNAL
X509_NAME_ENTRIES
X509_NAME_ENTRY
lib/openssl/crypto/asn1/x_pubkey.c
X509_PUBKEY
public_key
X509_SIG
X509_VAL
notBefore
notAfter
cert_info
signature
X509_CINF
serialNumber
validity
issuerUID
subjectUID
X509_CERT_PAIR
X509_CERT_AUX
lib/openssl/crypto/bn/bn_add.c
lib/openssl/crypto/bn/bn_asm.c
num >= 0
(i == 32) || (h <= (unsigned int)1<<i)
lib/openssl/crypto/bn/bn_ctx.c
lib/openssl/crypto/bn/bn_div.c
lib/openssl/crypto/bn/bn_exp.c
lib/openssl/crypto/bn/bn_gcd.c
lib/openssl/crypto/bn/bn_lib.c
bn(%d,%d)
lib/openssl/crypto/bn/bn_mont.c
lib/openssl/crypto/bn/bn_mul.c
j <= al || j <= bl
lib/openssl/crypto/bn/bn_print.c
lib/openssl/crypto/buffer/buffer.c
lib/openssl/crypto/err/err.c
int_thread_get (err.c)
int_err_get (err.c)
lib(%lu)
func(%lu)
reason(%lu)
error:%08lX:%s:%s:%s
system lib
X509 lib
ASN1 lib
CONF lib
CRYPTO lib
PKCS7 lib
X509V3 lib
PKCS12 lib
RAND lib
ENGINE lib
OCSP lib
nested asn1 error
bad asn1 object header
bad get asn1 object call
expecting an asn1 sequence
asn1 length mismatch
missing asn1 eos
malloc failure
called a function you should not call
passed a null parameter
internal error
called a function that was disabled at compile-time
ioctlsocket
unknown library
system library
bignum routines
rsa routines
Diffie-Hellman routines
digital envelope routines
memory buffer routines
object identifier routines
PEM routines
dsa routines
x509 certificate routines
asn1 encoding routines
configuration file routines
common libcrypto routines
elliptic curve routines
SSL routines
BIO routines
PKCS7 routines
X509 V3 routines
PKCS12 routines
random number generator
DSO support routines
time stamp routines
engine routines
OCSP routines
FIPS routines
CMS routines
HMAC routines
lib/openssl/crypto/evp/digest.c
ctx->digest->md_size <= EVP_MAX_MD_SIZE
lib/openssl/crypto/evp/evp_lib.c
l <= sizeof(c->iv)
j <= sizeof(c->iv)
lib/openssl/crypto/evp/p_lib.c
%s algorithm "%s" unsupported
Public Key
Private Key
Parameters
lib/openssl/crypto/evp/pmeth_lib.c
lib/openssl/crypto/lhash/lhash.c
lib/openssl/crypto/objects/obj_dat.c
undefined
RSA Data Security, Inc.
RSA Data Security, Inc. PKCS
rsaEncryption
md2WithRSAEncryption
md5WithRSAEncryption
PBE-MD2-DES
pbeWithMD2AndDES-CBC
PBE-MD5-DES
pbeWithMD5AndDES-CBC
directory services (X.500)
commonName
countryName
localityName
stateOrProvinceName
organizationName
organizationalUnitName
pkcs7-data
pkcs7-signedData
pkcs7-envelopedData
pkcs7-signedAndEnvelopedData
pkcs7-digestData
pkcs7-encryptedData
dhKeyAgreement
DES-EDE3
des-ede3
IDEA-CBC
idea-cbc
IDEA-CFB
idea-cfb
IDEA-ECB
idea-ecb
shaWithRSAEncryption
DES-EDE-CBC
des-ede-cbc
DES-EDE3-CBC
des-ede3-cbc
IDEA-OFB
idea-ofb
emailAddress
unstructuredName
contentType
messageDigest
signingTime
countersignature
challengePassword
unstructuredAddress
extendedCertificateAttributes
Netscape
Netscape Communications Corp.
nsCertExt
Netscape Certificate Extension
nsDataType
Netscape Data Type
DES-EDE-CFB
des-ede-cfb
DES-EDE3-CFB
des-ede3-cfb
DES-EDE-OFB
des-ede-ofb
DES-EDE3-OFB
des-ede3-ofb
RSA-SHA1
sha1WithRSAEncryption
dsaWithSHA
dsaEncryption-old
PBE-SHA1-RC2-64
pbeWithSHA1AndRC2-CBC
DSA-SHA1-old
dsaWithSHA1-old
nsCertType
Netscape Cert Type
nsBaseUrl
Netscape Base Url
nsRevocationUrl
Netscape Revocation Url
nsCaRevocationUrl
Netscape CA Revocation Url
nsRenewalUrl
Netscape Renewal Url
nsCaPolicyUrl
Netscape CA Policy Url
nsSslServerName
Netscape SSL Server Name
nsComment
Netscape Comment
nsCertSequence
Netscape Certificate Sequence
DESX-CBC
desx-cbc
subjectKeyIdentifier
X509v3 Subject Key Identifier
keyUsage
X509v3 Key Usage
privateKeyUsagePeriod
X509v3 Private Key Usage Period
subjectAltName
X509v3 Subject Alternative Name
issuerAltName
X509v3 Issuer Alternative Name
basicConstraints
X509v3 Basic Constraints
crlNumber
X509v3 CRL Number
certificatePolicies
X509v3 Certificate Policies
authorityKeyIdentifier
X509v3 Authority Key Identifier
RSA-MDC2
mdc2WithRSA
RC2-40-CBC
rc2-40-cbc
givenName
initials
crlDistributionPoints
X509v3 CRL Distribution Points
RSA-NP-MD5
md5WithRSA
description
CAST5-CBC
cast5-cbc
CAST5-ECB
cast5-ecb
CAST5-CFB
cast5-cfb
CAST5-OFB
cast5-ofb
pbeWithMD5AndCast5CBC
DSA-SHA1
dsaWithSHA1
MD5-SHA1
md5-sha1
RSA-SHA1-2
sha1WithRSA
dsaEncryption
ripemd160
RSA-RIPEMD160
ripemd160WithRSA
run length compression
zlib compression
extendedKeyUsage
X509v3 Extended Key Usage
serverAuth
TLS Web Server Authentication
clientAuth
TLS Web Client Authentication
codeSigning
Code Signing
emailProtection
E-mail Protection
timeStamping
Time Stamping
msCodeInd
Microsoft Individual Code Signing
msCodeCom
Microsoft Commercial Code Signing
msCTLSign
Microsoft Trust List Signing
Microsoft Server Gated Crypto
Microsoft Encrypted File System
Netscape Server Gated Crypto
deltaCRL
X509v3 Delta CRL Indicator
CRLReason
X509v3 CRL Reason Code
invalidityDate
Invalidity Date
Strong Extranet ID
PBE-SHA1-RC4-128
pbeWithSHA1And128BitRC4
PBE-SHA1-RC4-40
pbeWithSHA1And40BitRC4
PBE-SHA1-3DES
pbeWithSHA1And3-KeyTripleDES-CBC
PBE-SHA1-2DES
pbeWithSHA1And2-KeyTripleDES-CBC
PBE-SHA1-RC2-128
pbeWithSHA1And128BitRC2-CBC
PBE-SHA1-RC2-40
pbeWithSHA1And40BitRC2-CBC
pkcs8ShroudedKeyBag
secretBag
safeContentsBag
friendlyName
localKeyID
x509Certificate
sdsiCertificate
hmacWithSHA1
id-qt-cps
Policy Qualifier CPS
id-qt-unotice
Policy Qualifier User Notice
RC2-64-CBC
rc2-64-cbc
SMIME-CAPS
S/MIME Capabilities
PBE-MD2-RC2-64
pbeWithMD2AndRC2-CBC
PBE-MD5-RC2-64
pbeWithMD5AndRC2-CBC
PBE-SHA1-DES
pbeWithSHA1AndDES-CBC
msExtReq
Microsoft Extension Request
Extension Request
dnQualifier
authorityInfoAccess
Authority Information Access
caIssuers
CA Issuers
OCSPSigning
OCSP Signing
member-body
ISO Member Body
ISO US Member Body
X9.57 CM ?
id-smime-mod
id-smime-ct
id-smime-aa
id-smime-alg
id-smime-cd
id-smime-spq
id-smime-cti
id-smime-mod-cms
id-smime-mod-ess
id-smime-mod-oid
id-smime-mod-msg-v3
id-smime-mod-ets-eSignature-88
id-smime-mod-ets-eSignature-97
id-smime-mod-ets-eSigPolicy-88
id-smime-mod-ets-eSigPolicy-97
id-smime-ct-receipt
id-smime-ct-authData
id-smime-ct-publishCert
id-smime-ct-TSTInfo
id-smime-ct-TDTInfo
id-smime-ct-contentInfo
id-smime-ct-DVCSRequestData
id-smime-ct-DVCSResponseData
id-smime-aa-receiptRequest
id-smime-aa-securityLabel
id-smime-aa-mlExpandHistory
id-smime-aa-contentHint
id-smime-aa-msgSigDigest
id-smime-aa-encapContentType
id-smime-aa-contentIdentifier
id-smime-aa-macValue
id-smime-aa-equivalentLabels
id-smime-aa-contentReference
id-smime-aa-encrypKeyPref
id-smime-aa-signingCertificate
id-smime-aa-smimeEncryptCerts
id-smime-aa-timeStampToken
id-smime-aa-ets-sigPolicyId
id-smime-aa-ets-commitmentType
id-smime-aa-ets-signerLocation
id-smime-aa-ets-signerAttr
id-smime-aa-ets-otherSigCert
id-smime-aa-ets-contentTimestamp
id-smime-aa-ets-CertificateRefs
id-smime-aa-ets-RevocationRefs
id-smime-aa-ets-certValues
id-smime-aa-ets-revocationValues
id-smime-aa-ets-escTimeStamp
id-smime-aa-ets-certCRLTimestamp
id-smime-aa-ets-archiveTimeStamp
id-smime-aa-signatureType
id-smime-aa-dvcs-dvc
id-smime-alg-ESDHwith3DES
id-smime-alg-ESDHwithRC2
id-smime-alg-3DESwrap
id-smime-alg-RC2wrap
id-smime-alg-ESDH
id-smime-alg-CMS3DESwrap
id-smime-alg-CMSRC2wrap
id-smime-cd-ldap
id-smime-spq-ets-sqt-uri
id-smime-spq-ets-sqt-unotice
id-smime-cti-ets-proofOfOrigin
id-smime-cti-ets-proofOfReceipt
id-smime-cti-ets-proofOfDelivery
id-smime-cti-ets-proofOfSender
id-smime-cti-ets-proofOfApproval
id-smime-cti-ets-proofOfCreation
id-pkix-mod
id-pkix1-explicit-88
id-pkix1-implicit-88
id-pkix1-explicit-93
id-pkix1-implicit-93
id-mod-crmf
id-mod-cmc
id-mod-kea-profile-88
id-mod-kea-profile-93
id-mod-cmp
id-mod-qualified-cert-88
id-mod-qualified-cert-93
id-mod-attribute-cert
id-mod-timestamp-protocol
id-mod-ocsp
id-mod-dvcs
id-mod-cmp2000
biometricInfo
Biometric Info
qcStatements
ac-auditEntity
ac-targeting
aaControls
sbgp-ipAddrBlock
sbgp-autonomousSysNum
sbgp-routerIdentifier
textNotice
ipsecEndSystem
IPSec End System
ipsecTunnel
IPSec Tunnel
ipsecUser
IPSec User
id-it-caProtEncCert
id-it-signKeyPairTypes
id-it-encKeyPairTypes
id-it-preferredSymmAlg
id-it-caKeyUpdateInfo
id-it-currentCRL
id-it-unsupportedOIDs
id-it-subscriptionRequest
id-it-subscriptionResponse
id-it-keyPairParamReq
id-it-keyPairParamRep
id-it-revPassphrase
id-it-implicitConfirm
id-it-confirmWaitTime
id-it-origPKIMessage
id-regCtrl
id-regInfo
id-regCtrl-regToken
id-regCtrl-authenticator
id-regCtrl-pkiPublicationInfo
id-regCtrl-pkiArchiveOptions
id-regCtrl-oldCertID
id-regCtrl-protocolEncrKey
id-regInfo-utf8Pairs
id-regInfo-certReq
id-alg-des40
id-alg-noSignature
id-alg-dh-sig-hmac-sha1
id-alg-dh-pop
id-cmc-statusInfo
id-cmc-identification
id-cmc-identityProof
id-cmc-dataReturn
id-cmc-transactionId
id-cmc-senderNonce
id-cmc-recipientNonce
id-cmc-addExtensions
id-cmc-encryptedPOP
id-cmc-decryptedPOP
id-cmc-lraPOPWitness
id-cmc-getCert
id-cmc-getCRL
id-cmc-revokeRequest
id-cmc-regInfo
id-cmc-responseInfo
id-cmc-queryPending
id-cmc-popLinkRandom
id-cmc-popLinkWitness
id-cmc-confirmCertAcceptance
id-on-personalData
id-pda-dateOfBirth
id-pda-placeOfBirth
id-pda-gender
id-pda-countryOfCitizenship
id-pda-countryOfResidence
id-aca-authenticationInfo
id-aca-accessIdentity
id-aca-chargingIdentity
id-aca-group
id-aca-role
id-qcs-pkixQCSyntax-v1
id-cct-crs
id-cct-PKIData
id-cct-PKIResponse
ad_timestamping
AD Time Stamping
basicOCSPResponse
Basic OCSP Response
OCSP Nonce
OCSP CRL ID
acceptableResponses
Acceptable OCSP Responses
OCSP No Check
archiveCutoff
OCSP Archive Cutoff
serviceLocator
OCSP Service Locator
extendedStatus
Extended OCSP Status
trustRoot
Trust Root
rsaSignature
X500algorithms
directory services - algorithms
directory
Directory
Management
experimental
Experimental
security
Security
enterprises
Enterprises
dcobject
dcObject
domainComponent
selected-attribute-types
Selected Attribute Types
clearance
md4WithRSAEncryption
ac-proxying
subjectInfoAccess
Subject Information Access
id-aca-encAttrs
policyConstraints
X509v3 Policy Constraints
targetInformation
X509v3 AC Targeting
noRevAvail
X509v3 No Revocation Available
ansi-X9-62
ANSI X9.62
prime-field
characteristic-two-field
id-ecPublicKey
prime192v1
prime192v2
prime192v3
prime239v1
prime239v2
prime239v3
prime256v1
ecdsa-with-SHA1
Microsoft CSP Name
AES-128-ECB
aes-128-ecb
AES-128-CBC
aes-128-cbc
AES-128-OFB
aes-128-ofb
AES-128-CFB
aes-128-cfb
AES-192-ECB
aes-192-ecb
AES-192-CBC
aes-192-cbc
AES-192-OFB
aes-192-ofb
AES-192-CFB
aes-192-cfb
AES-256-ECB
aes-256-ecb
AES-256-CBC
aes-256-cbc
AES-256-OFB
aes-256-ofb
AES-256-CFB
aes-256-cfb
holdInstructionCode
Hold Instruction Code
holdInstructionNone
Hold Instruction None
holdInstructionCallIssuer
Hold Instruction Call Issuer
holdInstructionReject
Hold Instruction Reject
pilotAttributeType
pilotAttributeSyntax
pilotObjectClass
pilotGroups
iA5StringSyntax
caseIgnoreIA5StringSyntax
pilotObject
pilotPerson
document
documentSeries
rFC822localPart
dNSDomain
domainRelatedObject
friendlyCountry
simpleSecurityObject
pilotOrganization
pilotDSA
qualityLabelledData
textEncodedORAddress
rfc822Mailbox
favouriteDrink
roomNumber
userClass
documentIdentifier
documentTitle
documentVersion
documentAuthor
documentLocation
homeTelephoneNumber
secretary
otherMailbox
lastModifiedTime
lastModifiedBy
pilotAttributeType27
mXRecord
nSRecord
sOARecord
cNAMERecord
associatedDomain
associatedName
homePostalAddress
personalTitle
mobileTelephoneNumber
pagerTelephoneNumber
friendlyCountryName
organizationalStatus
janetMailbox
mailPreferenceOption
buildingName
dSAQuality
singleLevelQuality
subtreeMinimumQuality
subtreeMaximumQuality
personalSignature
dITRedirect
documentPublisher
x500UniqueIdentifier
mime-mhs
MIME MHS
mime-mhs-headings
mime-mhs-bodies
id-hex-partial-message
id-hex-multipart-message
generationQualifier
pseudonym
Secure Electronic Transactions
set-ctype
content types
set-msgExt
message extensions
set-attr
set-policy
set-certExt
certificate extensions
set-brand
setct-PANData
setct-PANToken
setct-PANOnly
setct-OIData
setct-PI
setct-PIData
setct-PIDataUnsigned
setct-HODInput
setct-AuthResBaggage
setct-AuthRevReqBaggage
setct-AuthRevResBaggage
setct-CapTokenSeq
setct-PInitResData
setct-PI-TBS
setct-PResData
setct-AuthReqTBS
setct-AuthResTBS
setct-AuthResTBSX
setct-AuthTokenTBS
setct-CapTokenData
setct-CapTokenTBS
setct-AcqCardCodeMsg
setct-AuthRevReqTBS
setct-AuthRevResData
setct-AuthRevResTBS
setct-CapReqTBS
setct-CapReqTBSX
setct-CapResData
setct-CapRevReqTBS
setct-CapRevReqTBSX
setct-CapRevResData
setct-CredReqTBS
setct-CredReqTBSX
setct-CredResData
setct-CredRevReqTBS
setct-CredRevReqTBSX
setct-CredRevResData
setct-PCertReqData
setct-PCertResTBS
setct-BatchAdminReqData
setct-BatchAdminResData
setct-CardCInitResTBS
setct-MeAqCInitResTBS
setct-RegFormResTBS
setct-CertReqData
setct-CertReqTBS
setct-CertResData
setct-CertInqReqTBS
setct-ErrorTBS
setct-PIDualSignedTBE
setct-PIUnsignedTBE
setct-AuthReqTBE
setct-AuthResTBE
setct-AuthResTBEX
setct-AuthTokenTBE
setct-CapTokenTBE
setct-CapTokenTBEX
setct-AcqCardCodeMsgTBE
setct-AuthRevReqTBE
setct-AuthRevResTBE
setct-AuthRevResTBEB
setct-CapReqTBE
setct-CapReqTBEX
setct-CapResTBE
setct-CapRevReqTBE
setct-CapRevReqTBEX
setct-CapRevResTBE
setct-CredReqTBE
setct-CredReqTBEX
setct-CredResTBE
setct-CredRevReqTBE
setct-CredRevReqTBEX
setct-CredRevResTBE
setct-BatchAdminReqTBE
setct-BatchAdminResTBE
setct-RegFormReqTBE
setct-CertReqTBE
setct-CertReqTBEX
setct-CertResTBE
setct-CRLNotificationTBS
setct-CRLNotificationResTBS
setct-BCIDistributionTBS
setext-genCrypt
generic cryptogram
setext-miAuth
merchant initiated auth
setext-pinSecure
setext-pinAny
setext-track2
setext-cv
additional verification
set-policy-root
setCext-hashedRoot
setCext-certType
setCext-merchData
setCext-cCertRequired
setCext-tunneling
setCext-setExt
setCext-setQualf
setCext-PGWYcapabilities
setCext-TokenIdentifier
setCext-Track2Data
setCext-TokenType
setCext-IssuerCapabilities
setAttr-Cert
setAttr-PGWYcap
payment gateway capabilities
setAttr-TokenType
setAttr-IssCap
issuer capabilities
set-rootKeyThumb
set-addPolicy
setAttr-Token-EMV
setAttr-Token-B0Prime
setAttr-IssCap-CVM
setAttr-IssCap-T2
setAttr-IssCap-Sig
setAttr-GenCryptgrm
generate cryptogram
setAttr-T2Enc
encrypted track 2
setAttr-T2cleartxt
cleartext track 2
setAttr-TokICCsig
ICC or token signature
setAttr-SecDevSig
secure device signature
set-brand-IATA-ATA
set-brand-Diners
set-brand-AmericanExpress
set-brand-JCB
set-brand-Visa
set-brand-MasterCard
set-brand-Novus
DES-CDMF
des-cdmf
rsaOAEPEncryptionSET
JOINT-ISO-ITU-T
joint-iso-itu-t
international-organizations
International Organizations
msSmartcardLogin
Microsoft Smartcardlogin
Microsoft Universal Principal Name
AES-128-CFB1
aes-128-cfb1
AES-192-CFB1
aes-192-cfb1
AES-256-CFB1
aes-256-cfb1
AES-128-CFB8
aes-128-cfb8
AES-192-CFB8
aes-192-cfb8
AES-256-CFB8
aes-256-cfb8
DES-CFB1
des-cfb1
DES-CFB8
des-cfb8
DES-EDE3-CFB1
des-ede3-cfb1
DES-EDE3-CFB8
des-ede3-cfb8
streetAddress
postalCode
proxyCertInfo
Proxy Certificate Information
id-ppl-anyLanguage
Any language
id-ppl-inheritAll
Inherit all
nameConstraints
X509v3 Name Constraints
id-ppl-independent
Independent
RSA-SHA256
sha256WithRSAEncryption
RSA-SHA384
sha384WithRSAEncryption
RSA-SHA512
sha512WithRSAEncryption
RSA-SHA224
sha224WithRSAEncryption
identified-organization
certicom-arc
id-characteristic-two-basis
c2pnb163v1
c2pnb163v2
c2pnb163v3
c2pnb176v1
c2tnb191v1
c2tnb191v2
c2tnb191v3
c2onb191v4
c2onb191v5
c2pnb208w1
c2tnb239v1
c2tnb239v2
c2tnb239v3
c2onb239v4
c2onb239v5
c2pnb272w1
c2pnb304w1
c2tnb359v1
c2pnb368w1
c2tnb431r1
secp112r1
secp112r2
secp128r1
secp128r2
secp160k1
secp160r1
secp160r2
secp192k1
secp224k1
secp224r1
secp256k1
secp384r1
secp521r1
sect113r1
sect113r2
sect131r1
sect131r2
sect163k1
sect163r1
sect163r2
sect193r1
sect193r2
sect233k1
sect233r1
sect239k1
sect283k1
sect283r1
sect409k1
sect409r1
sect571k1
sect571r1
wap-wsg-idm-ecid-wtls1
wap-wsg-idm-ecid-wtls3
wap-wsg-idm-ecid-wtls4
wap-wsg-idm-ecid-wtls5
wap-wsg-idm-ecid-wtls6
wap-wsg-idm-ecid-wtls7
wap-wsg-idm-ecid-wtls8
wap-wsg-idm-ecid-wtls9
wap-wsg-idm-ecid-wtls10
wap-wsg-idm-ecid-wtls11
wap-wsg-idm-ecid-wtls12
anyPolicy
X509v3 Any Policy
policyMappings
X509v3 Policy Mappings
inhibitAnyPolicy
X509v3 Inhibit Any Policy
Oakley-EC2N-3
Oakley-EC2N-4
CAMELLIA-128-CBC
camellia-128-cbc
CAMELLIA-192-CBC
camellia-192-cbc
CAMELLIA-256-CBC
camellia-256-cbc
CAMELLIA-128-ECB
camellia-128-ecb
CAMELLIA-192-ECB
camellia-192-ecb
CAMELLIA-256-ECB
camellia-256-ecb
CAMELLIA-128-CFB
camellia-128-cfb
CAMELLIA-192-CFB
camellia-192-cfb
CAMELLIA-256-CFB
camellia-256-cfb
CAMELLIA-128-CFB1
camellia-128-cfb1
CAMELLIA-192-CFB1
camellia-192-cfb1
CAMELLIA-256-CFB1
camellia-256-cfb1
CAMELLIA-128-CFB8
camellia-128-cfb8
CAMELLIA-192-CFB8
camellia-192-cfb8
CAMELLIA-256-CFB8
camellia-256-cfb8
CAMELLIA-128-OFB
camellia-128-ofb
CAMELLIA-192-OFB
camellia-192-ofb
CAMELLIA-256-OFB
camellia-256-ofb
subjectDirectoryAttributes
X509v3 Subject Directory Attributes
issuingDistributionPoint
X509v3 Issuing Distrubution Point
certificateIssuer
X509v3 Certificate Issuer
SEED-ECB
seed-ecb
SEED-CBC
seed-cbc
SEED-OFB
seed-ofb
SEED-CFB
seed-cfb
HMAC-MD5
hmac-md5
HMAC-SHA1
hmac-sha1
id-PasswordBasedMAC
password based MAC
id-DHBasedMac
Diffie-Hellman based MAC
id-it-suppLangTags
caRepository
CA Repository
id-smime-ct-compressedData
id-ct-asciiTextWithCRLF
id-aes128-wrap
id-aes192-wrap
id-aes256-wrap
ecdsa-with-Recommended
ecdsa-with-Specified
ecdsa-with-SHA224
ecdsa-with-SHA256
ecdsa-with-SHA384
ecdsa-with-SHA512
hmacWithMD5
hmacWithSHA224
hmacWithSHA256
hmacWithSHA384
hmacWithSHA512
dsa_with_SHA224
dsa_with_SHA256
whirlpool
cryptopro
cryptocom
id-GostR3411-94-with-GostR3410-2001
GOST R 34.11-94 with GOST R 34.10-2001
id-GostR3411-94-with-GostR3410-94
GOST R 34.11-94 with GOST R 34.10-94
md_gost94
GOST R 34.11-94
id-HMACGostR3411-94
HMAC GOST 34.11-94
gost2001
GOST R 34.10-2001
GOST R 34.10-94
GOST 28147-89
gost89-cnt
gost-mac
GOST 28147-89 MAC
prf-gostr3411-94
GOST R 34.11-94 PRF
id-GostR3410-2001DH
GOST R 34.10-2001 DH
id-GostR3410-94DH
GOST R 34.10-94 DH
id-Gost28147-89-CryptoPro-KeyMeshing
id-Gost28147-89-None-KeyMeshing
id-GostR3411-94-TestParamSet
id-GostR3411-94-CryptoProParamSet
id-Gost28147-89-TestParamSet
id-Gost28147-89-CryptoPro-A-ParamSet
id-Gost28147-89-CryptoPro-B-ParamSet
id-Gost28147-89-CryptoPro-C-ParamSet
id-Gost28147-89-CryptoPro-D-ParamSet
id-Gost28147-89-CryptoPro-Oscar-1-1-ParamSet
id-Gost28147-89-CryptoPro-Oscar-1-0-ParamSet
id-Gost28147-89-CryptoPro-RIC-1-ParamSet
id-GostR3410-94-TestParamSet
id-GostR3410-94-CryptoPro-A-ParamSet
id-GostR3410-94-CryptoPro-B-ParamSet
id-GostR3410-94-CryptoPro-C-ParamSet
id-GostR3410-94-CryptoPro-D-ParamSet
id-GostR3410-94-CryptoPro-XchA-ParamSet
id-GostR3410-94-CryptoPro-XchB-ParamSet
id-GostR3410-94-CryptoPro-XchC-ParamSet
id-GostR3410-2001-TestParamSet
id-GostR3410-2001-CryptoPro-A-ParamSet
id-GostR3410-2001-CryptoPro-B-ParamSet
id-GostR3410-2001-CryptoPro-C-ParamSet
id-GostR3410-2001-CryptoPro-XchA-ParamSet
id-GostR3410-2001-CryptoPro-XchB-ParamSet
id-GostR3410-94-a
id-GostR3410-94-aBis
id-GostR3410-94-b
id-GostR3410-94-bBis
id-Gost28147-89-cc
GOST 28147-89 Cryptocom ParamSet
gost94cc
GOST 34.10-94 Cryptocom
gost2001cc
GOST 34.10-2001 Cryptocom
id-GostR3411-94-with-GostR3410-94-cc
GOST R 34.11-94 with GOST R 34.10-94 Cryptocom
id-GostR3411-94-with-GostR3410-2001-cc
GOST R 34.11-94 with GOST R 34.10-2001 Cryptocom
id-GostR3410-2001-ParamSet-cc
GOST R 3410-2001 Parameter Set Cryptocom
LocalKeySet
Microsoft Local Key set
freshestCRL
X509v3 Freshest CRL
id-on-permanentIdentifier
Permanent Identifier
searchGuide
businessCategory
postalAddress
postOfficeBox
physicalDeliveryOfficeName
telephoneNumber
telexNumber
teletexTerminalIdentifier
facsimileTelephoneNumber
x121Address
internationaliSDNNumber
registeredAddress
destinationIndicator
preferredDeliveryMethod
presentationAddress
supportedApplicationContext
roleOccupant
userPassword
userCertificate
cACertificate
authorityRevocationList
certificateRevocationList
crossCertificatePair
enhancedSearchGuide
protocolInformation
distinguishedName
uniqueMember
houseIdentifier
supportedAlgorithms
deltaRevocationList
lib/openssl/crypto/objects/obj_lib.c
lib/openssl/crypto/rsa/rsa_ameth.c
OpenSSL RSA method
lib/openssl/crypto/rsa/rsa_eay.c
Openssl LK: Removed rand dependency in rsa_eay.c
Eric Young's PKCS#1 RSA
lib/openssl/crypto/rsa/rsa_lib.c
lib/openssl/crypto/rsa/rsa_none.c
lib/openssl/crypto/rsa/rsa_pk1.c
Openssl LK: Removing rand dependency in rsa_pk1.c
lib/openssl/crypto/rsa/rsa_sign.c
lib/openssl/crypto/rsa/rsa_x931.c
lib/openssl/crypto/stack/stack.c
NO X509_NAME
lib/openssl/crypto/x509/x509_obj.c
0123456789ABCDEF
AUTHORITY_KEYID
%*sCPS: %s
%*sUser Notice:
%*sOrganization: %s
%*sNumber%s:
%*sExplicit Text: %s
%*sUnknown Qualifier:
%*sPolicy:
lib/openssl/crypto/x509v3/v3_cpols.c
section:
policyIdentifier
userNotice
explicitText
organization
noticeNumbers
Non Critical
%*sNo Qualifiers
NOTICEREF
noticenos
USERNOTICE
noticeref
POLICYQUALINFO
d.cpsuri
d.usernotice
POLICYINFO
policyid
qualifiers
CERTIFICATEPOLICIES
%*sFull Name:
%*sRelative Name:
%*sCRL Issuer:
%*sOnly User Certificates
%*sOnly CA Certificates
%*sIndirect CRL
Only Some Reasons
%*sOnly Attribute Certificates
%*s<EMPTY>
lib/openssl/crypto/x509v3/v3_crld.c
fullname
relativename
CRLissuer
onlyuser
indirectCRL
onlysomereasons
ISSUING_DIST_POINT
distpoint
onlyattr
CRL_DIST_POINTS
CRLDistributionPoints
DIST_POINT_NAME
name.fullname
name.relativename
Key Compromise
keyCompromise
CA Compromise
CACompromise
Affiliation Changed
affiliationChanged
Superseded
superseded
Cessation Of Operation
cessationOfOperation
Certificate Hold
certificateHold
Privilege Withdrawn
privilegeWithdrawn
AA Compromise
AACompromise
GENERAL_NAMES
GeneralNames
GENERAL_NAME
d.otherName
d.rfc822Name
d.dNSName
d.x400Address
d.directoryName
d.ediPartyName
d.uniformResourceIdentifier
d.iPAddress
d.registeredID
EDIPARTYNAME
nameAssigner
partyName
OTHERNAME
permitted
excluded
lib/openssl/crypto/x509v3/v3_ncons.c
%d.%d.%d.%d/%d.%d.%d.%d
IP Address:<invalid>
Permitted
Excluded
NAME_CONSTRAINTS
permittedSubtrees
excludedSubtrees
GENERAL_SUBTREE
incorrect header check
unknown compression method
invalid window size
invalid block type
invalid stored block lengths
too many length or distance symbols
invalid code lengths set
invalid bit length repeat
invalid code -- missing end-of-block
invalid literal/lengths set
invalid distances set
invalid literal/length code
invalid distance code
invalid distance too far back
incorrect data check
the input data is not a gzip package.
the avaiable length of out_buf is not enough.
allocating z_stream failed.
header error
inflateInit2 failed!
uncompression error
Not a gzip file
[FOTA] : FOTA Heap Free : %s, %d
../../../vendor/lge/fota/platform/android/services/devices/storage/internal/istorage_partition_gpt.c
[FOTA] : _ReadGPTHeader - %d, %lld
[FOTA] : _ReadGPTHeader pstGPTHeader malloc fail
[FOTA] : _ReadGPTHeader read fail
EFI PART
EFIBPART
[FOTA] : _ReadGPTHeader signature fail
[FOTA] : _ReadGPTEntry  - %d, %lld
[FOTA] : _ReadGPTEntry pstGPTEntry malloc fail
[FOTA] : _ReadGPTEntry read fail
[FOTA] : _SetUAPartitionTable in %x
[FOTA] : --------------------------------------------------------
[FOTA] : _SetUAPartitionTable(%d pt) : %d, %s, %llx, %llx
[FOTA] : IStoragePart_AllocPartitionInfo
[FOTA] : IStoragePart_AddPartition %s
[FOTA] : IStoragePart_WritePartitionInfo %llx
[FOTA] : IStorageFlash_SetActiveLun %d
[FOTA] : EntryLK_IsRecoveryBoot - Boot
[FOTA] : EntryLK_IsRecoveryBakBoot - recoveryb
[FOTA] : EntryLK_IsRecoveryBakBoot - recovery
[FOTA] : USD already initialized
[FOTA] : _Initialize - USDCtrl_Initialize fail
[FOTA] : _Initialize - DevPartition_GetPartitionInfo FOTA_PARTITION Error
[FOTA] : _AdjustStartOffset - USD Offset adjustment error
[FOTA] : _Initialize - USD Offset adjustment error
[FOTA] : _Initialize : %llx, %llx
[FOTA] : USDMgr_SaveUSD
[FOTA] : USDMgr_SaveUSD : USDMgr not initialized.
[FOTA] : USDMgr_ClearUSD
[FOTA] : USDMgr_PrintUSD : USDMgr not initialized.
[FOTA] : enUpdateState                : 0x%08x
[FOTA] : stFWInfo.enState             : 0x%08x
[FOTA] : stFWInfo.uiPkgOffset[%d]     : 0x%08x
[FOTA] : stFWInfo.uiPkgSize[%d]       : 0x%08x
[FOTA] : stFWInfo.uiCurrSection       : 0x%08x
[FOTA] : stFWInfo.uiResult            : 0x%08x
[FOTA] : stFSInfo.enState             : 0x%08x
[FOTA] : stFSInfo.uiFilePackageOffset : 0x%08x
[FOTA] : stFSInfo.uiFilePackageSize   : 0x%08x
[FOTA] : stFSInfo.uiResult            : 0x%08x
[FOTA] : stPkgInfo.enPackageType      : 0x%08x
[FOTA] : stPkgInfo.uiSize             : 0x%08x
[FOTA] : stPkgInfo.uiDLWrittenAddr    : 0x%08x
[FOTA] : stPkgInfo.uiDLWrittenSize    : 0x%08x
[FOTA] : stPkgInfo.szPackagePath      : %s
[FOTA] : stCommand.enCommand          : 0x%08x
[FOTA] : ullBackupBufferAddr          : 0x%016llx
[FOTA] : uiLanguage                   : 0x%08x
[FOTA] : stDebug.uiResetCount         : 0x%08x
[FOTA] : stDebug.uiRetryCount         : 0x%08x
[FOTA] : uiUSDVersion                 : 0x%08x
[FOTA] : USDMgr_LoadUSD : USD already loaded
@@@@@@@@
>>>>>>>>
>>>>>>>>
",;HQ]@GSajqx
",;HQ]@GSajqx
sharp_wqxga_dualdsi_video
jdi_qhd_dualdsi_video
jdi_qhd_dualdsi_cmd
jdi_4k_dualdsi_video
jdi_nt36850_qhd_dualdsi_cmd
lgd_r69007_qhd_dualdsi_cmd
lgd_lg4943_qhd_dualdsi_cmd
lgd_lg4945_qhd_dualdsi_cmd
U@FNW`ju
+6>SKA6*$
+6>SKA6*$
"-Ln""aegik"qUUU
"-Ln""`dfhj"qUUU
ftm_magic
ftm_frst
ftm_serial_num
ftm_charger_skip
ftm_dload_factory_reset_flag
ftm_display_kcal
ftm_imei
ftm_manufacture_date
ftm_frst_running
ftm_aat_testorder
ftm_max_cpu
ftm_etm_log_enable
ftm_work_frst_mode
ftm_lcdbreak
ftm_download_sd_status
ftm_download_nv_area
ftm_firstboot_finished
ftm_support_cc_mode
ftm_fakebattery_status
lgftm_kill_switch
lgftm_encryption
lgftm_theme
lgftm_kswitch_unlock
lgftm_kswitch_extra_info
lgftm_kswitch_nonce
lgftm_kswitch_unlock_info
lgftm_laf_mid_reboot_flag
ftm_mfts_mode
ftm_meid
ftm_sniff_download_config
TMI+TMIA
partition-size:
partition-type:
userdata
partition-size:
partition-type:
partition-size:
partition-type:
ANDROID-BOOT!
sim-swte
sim-hwte
adv7533_1080p_video
qcom,mdss_dsi_adv7533_1080p60_video
adv7533_720p_video
qcom,mdss_dsi_adv7533_720p60_video
auo_qvga_cmd
qcom,mdss_dsi_auo_qvga_cmd
generic_720p_cmd
qcom,mdss_dsi_generic_720p_cmd
hx8279a_wsvga_video
qcom,mdss_dsi_hx8279a_wsvga_video
hx8379a_wvga_video
qcom,mdss_dsi_hx8379a_fwvga_video
hx8379a_truly_fwvga_video
qcom,mdss_dsi_hx8379a_truly_fwvga_video
hx8379a_wvga_video
qcom,mdss_dsi_hx8379a_wvga_video
hx8379c_fwvga_video
qcom,mdss_dsi_hx8379c_fwvga_video
hx8389b_qhd_video
qcom,mdss_dsi_hx8389b_qhd_video
hx8394a_720p_video
qcom,mdss_dsi_hx8394a_720p_video
hx8394d_720p_video
qcom,mdss_dsi_hx8394d_720p_video
hx8394d_qhd_video
qcom,mdss_dsi_hx8394d_qhd_video
ili9806e_fwvga_video
qcom,mdss_dsi_ili9806e_fwvga_video
innolux_720p_video
qcom,mdss_dsi_innolux_720p_video
jdi_4k_dualdsi_video
qcom,dsi_jdi_4k_video_0
qcom,dsi_jdi_4k_video_1
jdi_1080p_video
qcom,mdss_dsi_jdi_1080p_video
jdi_a216_fhd_video
qcom,mdss_dsi_jdi_a216_fhd_video
jdi_fhd_video
qcom,mdss_dsi_jdi_fhd_video
jdi_qhd_dualdsi_cmd
qcom,mdss_dsi_jdi_qhd_dualmipi_cmd_0
qcom,mdss_dsi_jdi_qhd_dualmipi_cmd_1
jdi_qhd_dualdsi_video
qcom,dsi_jdi_qhd_video_0
qcom,mdss_dsi_jdi_qhd_dualmipi_video_1
nt35521_720p_video
qcom,mdss_dsi_nt35521_720p_video
nt35521_wxga_video
qcom,mdss_dsi_nt35521_wxga_video
nt35590_720p_cmd
qcom,mdss_dsi_nt35590_720p_cmd
nt35590_720p_video
qcom,mdss_dsi_nt35590_720p_video
nt35590_qvga_cmd
qcom,mdss_dsi_nt35590_qvga_cmd
nt35596_1080p_video
qcom,mdss_dsi_nt35596_1080p_skuk_video
nt35597_wqxga_cmd
qcom,dsi_nt35597_wqxga_cmd
nt35597_wqxga_video
qcom,dsi_nt35597_wqxga_video
nt35597_wqxga_dualdsi_video
qcom,mdss_dsi_nt35597_wqxga_video_0
qcom,mdss_dsi_nt35597_wqxga_video_1
otm1283a_720p_video
qcom,mdss_dsi_otm1283a_720p_video
otm1906c_1080p_cmd
qcom,mdss_dsi_otm1906c_1080p_cmd
otm8018b_fwvga_video
qcom,mdss_dsi_otm8018b_fwvga_video
otm8019a_fwvga_video
qcom,mdss_dsi_otm8019a_fwvga_video
r61318_hd_video
qcom,mdss_dsi_r61318_hd_video
r63417_1080p_video
qcom,mdss_dsi_r63417_1080p_video
samsung_wxga_video
qcom,mdss_dsi_samsung_wxga_video
sharp_1080p_cmd
qcom,mdss_dsi_sharp_1080p_cmd
sharp_qhd_video
qcom,mdss_dsi_sharp_qhd_video
sharp_wqxga_dualdsi_video
qcom,mdss_dsi_sharp_wqxga_video_0
qcom,mdss_dsi_sharp_wqxga_video_1
ssd2080m_720p_video
qcom,mdss_dsi_ssd2080m_720p_video
toshiba_720p_video
qcom,mdss_dsi_toshiba_720p_video
truly_1080p_cmd
qcom,mdss_dsi_truly_1080p_cmd
truly_1080p_video
qcom,mdss_dsi_truly_1080p_video
truly_wvga_cmd
qcom,mdss_dsi_truly_wvga_cmd
truly_wvga_video
qcom,mdss_dsi_truly_wvga_video
abootbak
raw_resources
raw_resourcesbak
raw_resources
recovery
raw_resourcesbak
abootbak