API tools faq
paste
Advertisement
Guest User

Embest ATEB9200 (dmesg)

a guest
Jan 18th, 2021
209
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 6.25 KB | None | 0 0
raw download clone embed print report
  1. server ~/ateb9200 # dd if=/dev/ttyS0 bs=1
  2. Linux version 5.4.89 (root@server) (gcc version 10.2.0 (Gentoo 10.2.0-r5 p6)) #4 Sun Jan 17 23:07:52 MSK 2021
  3. CPU: ARM920T [41129200] revision 0 (ARMv4T), cr=0000717f
  4. CPU: VIVT data cache, VIVT instruction cache
  5. OF: fdt: Machine model: Atmel AT91RM9200 evaluation kit
  6. policy: Data cache writeback
  7. Built 1 zonelists, mobility grouping on. Total pages: 8128
  8. Kernel command line: console=ttyS0,115200n8 root=/dev/sda ro rootwait noinitrd init=/linuxrc mem=32M
  9. Dentry cache hash table entries: 4096 (order: 2, 16384 bytes, linear)
  10. Inode-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
  11. mem auto-init: stack:off, heap alloc:off, heap free:off
  12. Memory: 25724K/32768K available (4673K kernel code, 172K rwdata, 1300K rodata, 212K init, 103K bss, 7044K reserved, 0K cma-reserved)
  13. NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
  14. random: get_random_bytes called from start_kernel+0x24c/0x43c with crng_init=0
  15. clocksource: 32k_counter: mask: 0xfffff max_cycles: 0xfffff, max_idle_ns: 14239986419 ns
  16. sched_clock: 32 bits at 7MHz, resolution 133ns, wraps every 286790016957ns
  17. Switching to timer-based delay loop, resolution 133ns
  18. Console: colour dummy device 80x30
  19. Calibrating delay loop (skipped), value calculated using timer frequency.. 14.00 BogoMIPS (lpj=58500)
  20. pid_max: default: 32768 minimum: 301
  21. Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
  22. Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
  23. CPU: Testing write buffer coherency: ok
  24. Setting up static identity map for 0x20008200 - 0x20008258
  25. devtmpfs: initialized
  26. clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 14931722236523437 ns futex hash table entries: 256 (order: -1, 3072 bytes, linear)
  27. pinctrl core: initialized pinctrl subsystem
  28. NET: Registered protocol family 16
  29. DMA: preallocated 256 KiB pool for atomic coherent allocations
  30. cpuidle: using governor ladder
  31. AT91: PM: standby: standby, suspend: ulp0
  32. No ATAGs?
  33. gpio-at91
  34. gpio-at91
  35. gpio-at91
  36. gpio-at91
  37. pinctrl-at91 ahb:apb:pinctrl@fffff400: initialized AT91 pinctrl driver
  38. atmel_tcb: probe of fffa0000.timer failed with error -16
  39. fffff400.gpio: at address (ptrval) fffff600.gpio: at address (ptrval) fffff800.gpio: at address (ptrval) fffffa00.gpio: at address (ptrval)
  40. AT91: Detected SoC family: at91rm9200
  41. AT91: Detected SoC: at91rm9200 BGA, revision 1
  42. SCSI subsystem initialized
  43. usbcore: registered new interface driver usbfs
  44. usbcore: registered new interface driver hub
  45. usbcore: registered new device driver usb
  46. clocksource: Switched to clocksource timer@fffa0000
  47. NET: Registered protocol family 2
  48. tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear)
  49. TCP bind hash table entries: 1024 (order: 0, 4096 bytes, linear)
  50. TCP: Hash tables configured (established 1024 bind 1024)
  51. UDP hash table entries: 256 (order: 0, 4096 bytes, linear)
  52. UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear)
  53. NET: Registered protocol family 1
  54. NetWinder Floating Point Emulator V0.97 (double precision)
  55. Initialise system trusted keyrings
  56. workingset: timestamp_bits=30 max_order=13 bucket_order=0
  57. ntfs: driver 2.1.32 [Flags: R/W].
  58. fuse: init (API version 7.31)
  59. NET: Registered protocol family 38
  60. Key type asymmetric registered
  61. Asymmetric key parser 'x509' registered
  62. io scheduler mq-deadline registered
  63. io scheduler kyber registered
  64. brd: module loaded
  65. loop: module loaded
  66. atmel_usart_serial.0.auto: ttyS0 at MMIO 0xfffff200 (irq = 16, printk: console [ttyS0] enabled
  67. atmel_usart_serial atmel_usart_serial.0.auto: Not supported ip atmel_usart_serial.1.auto: ttyS2 at MMIO 0xfffc4000 (irq = 28, atmel_usart_serial atmel_usart_serial.1.auto: Not supported ip
  68. base_baud = 3744000) is a ATMEL_SERIAL
  69. name nor version, set to uart base_baud = 3744000) is a ATMEL_SERIAL name nor version, set to uart
  70. atmel_spi fffe0000.spi:
  71. mtd_dataflash@0 enforce
  72. atmel_spi fffe0000.spi:
  73. random: fast init done
  74. libphy: Fixed MDIO Bus: probed
  75. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-atmel: EHCI Atmel driver
  76. can not allocate dma coherent memory
  77. active low on chipselect handle
  78. Atmel SPI Controller version 0x0 at 0xfffe0000 (irq 30)
  79. ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  80. ohci-atmel: OHCI Atmel driver
  81. at91_ohci 300000.ohci: USB Host Controller
  82. at91_ohci 300000.ohci: new USB bus registered, assigned bus number 1 at91_ohci 300000.ohci: irq 31, io mem 0x00300000
  83. usb usb1: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  84. usb usb1: Product: USB Host Controller
  85. usb usb1: Manufacturer: Linux 5.4.89 ohci_hcd
  86. usb usb1: SerialNumber: at91
  87. hub 1-0:1.0: USB hub found
  88. hub 1-0:1.0: 2 ports detected
  89. usbcore: registered new interface driver cdc_acm
  90. cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters usbcore: registered new interface driver usb-storage
  91. udc: at91_udc version 3 May 2006
  92. g_serial gadget: Gadget Serial v2.4 g_serial gadget: g_serial ready
  93. at91_rtc fffffe00.rtc: registered as rtc0
  94. at91_rtc fffffe00.rtc: AT91 Real Time Clock driver. at91rm9200_wdt: AT91 Watchdog Timer enabled (5 seconds) sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman
  95. sdhci-pltfm: SDHCI platform and OF driver helper usbcore: registered new interface driver usbhid usbhid: USB HID core driver
  96. NET: Registered protocol family 17
  97. Loading compiled-in X.509 certificates
  98. at91_rtc fffffe00.rtc: setting system clock to 1998-01-01T00:04:00 UTC (883613040) Waiting for root device /dev/sda...
  99. random: crng init done
  100. scsi host0: usb-storage 1-1:1.0
  101. scsi 0:0:0:0: Direct-Access USB 2.0 SD MMC Reader PQ: 0 ANSI: 0 CCS sd 0:0:0:0: [sda] Write Protect is off
  102. sd 0:0:0:0: [sda] Assuming drive cache: write through
  103. sd 0:0:0:0: [sda] Attached SCSI removable disk
  104. EXT4-fs (sda): mounted filesystem with ordered data mode. Opts: (null)
  105. VFS: Mounted root (ext4 filesystem) readonly on device 8:0.
  106. devtmpfs: mounted
  107.  
  108. Freeing unused kernel memory: 212K
  109. This architecture does not have kernel memory protection.
  110. Run /linuxrc as init process
  111. Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000004 Rebooting in 600 seconds..
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!