Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- --------- beginning of kernel
- 02-01 21:12:15.556 0 0 I : Initializing cgroup subsys cpu
- 02-01 21:12:15.556 0 0 I : Linux version 3.4.0-g0d9bcc01 (root@build.sandpox.org) (gcc version 4.9.x-google 20140827 (prerelease) (GCC) ) #1 SMP PREEMPT Sun Jul 9 08:46:26 UTC 2017
- 02-01 21:12:15.556 0 0 W : CPU: ARMv7 Processor [512f06f0] revision 0 (ARMv7), cr=10c5387d
- 02-01 21:12:15.556 0 0 W : CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
- 02-01 21:12:15.556 0 0 I Machine : Qualcomm MSM 8974 (Flattened Device Tree), model: Samsung JS01LTE JPN rev0.8
- 02-01 21:12:15.556 0 0 W setup_bootmode: boot_mode is 0
- 02-01 21:12:15.556 0 0 I : qcom,ion-heap@16 reserved EBI1 size 1e00000
- 02-01 21:12:15.556 0 0 I : qcom,ion-heap@28 reserved EBI1 size 614000
- 02-01 21:12:15.556 0 0 I : qcom,mdss_fb_primary reserved EBI1 size 1f40000
- 02-01 21:12:15.556 0 0 I : Node qcom,mdss_fb_primary memblock_reserve memory 3200000-5100000
- 02-01 21:12:15.556 0 0 I : qcom,msm-contig-mem reserved EBI1 size 280000
- 02-01 21:12:15.556 0 0 I : Node qcom,msm-mem-hole removed memory 6c00000-10200000
- 02-01 21:12:15.556 0 0 I : memory pool 3 (start 0xbba00000 size 4600000) initialized
- 02-01 21:12:15.556 0 0 I cma : CMA: reserved 16 MiB at 2b400000
- 02-01 21:12:15.556 0 0 I cma : Found secure_region, memory base 0, size 165 MiB, limit 0xffffffff
- 02-01 21:12:15.556 0 0 I cma : CMA: reserved 168 MiB at b1000000
- 02-01 21:12:15.556 0 0 I cma : Found adsp_region, memory base 0, size 65 MiB, limit 0xffffffff
- 02-01 21:12:15.556 0 0 I cma : CMA: reserved 68 MiB at acc00000
- 02-01 21:12:15.556 0 0 I cma : Found qsecom_region, memory base 0, size 17 MiB, limit 0xffffffff
- 02-01 21:12:15.556 0 0 I cma : CMA: reserved 20 MiB at ab800000
- 02-01 21:12:15.556 0 0 W Memory policy: ECC disabled, Data cache writealloc
- 02-01 21:12:15.556 0 0 I : IMEM DT static mapping successful
- 02-01 21:12:15.556 0 0 D : On node 0 totalpages: 730112
- 02-01 21:12:15.556 0 0 D free_area_init_node: node 0, pgdat c1262cc0, node_mem_map c5100000
- 02-01 21:12:15.556 0 0 D Normal zone: 1416 pages used for memmap
- 02-01 21:12:15.556 0 0 D Normal zone: 0 pages reserved
- 02-01 21:12:15.556 0 0 D Normal zone: 141432 pages, LIFO batch:31
- 02-01 21:12:15.556 0 0 D HighMem zone: 4728 pages used for memmap
- 02-01 21:12:15.556 0 0 D HighMem zone: 582536 pages, LIFO batch:31
- 02-01 21:12:15.556 0 0 I PERCPU : Embedded 7 pages/cpu @c695f000 s15936 r0 d12736 u32768
- 02-01 21:12:15.556 0 0 D pcpu-alloc: s15936 r0 d12736 u32768 alloc=8*4096
- 02-01 21:12:15.556 0 0 D pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
- 02-01 21:12:15.556 0 0 W : Built 1 zonelists in Zone order, mobility grouping on. Total pages: 723968
- 02-01 21:12:15.556 0 0 I : Kernel command line: console=null androidboot.hardware=qcom user_debug=23 msm_rtb.filter=0x37 ehci-hcd.park=3 androidboot.bootdevice=msm_sdcc.1 androidboot.selinux=permissive androidboot.sec_atd.tty=/dev/ttyHSL0 sec_log=0x100000@0x10000008 sec_dbg=0x80000@0x10100008 sec_debug.reset_reason=0x1a2b3c00 lcd_id=0x408047 pmic_info=4 androidboot.debug_level=0x4f4c sec_debug.enable=0 sec_debug.enable_user=0 androidboot.cp_debug_level=0x55FF sec_debug.enable_cp_debug=0 cordon=f92bb3eb27eb8f5b9b899ee74b68d240 connie=SGH-N075_DCM_JPN_934a88eab0f39b21142cead5462dbe80 loglevel=4 samsung.hardware=SGH-N075 samsung.board_rev=12 androidboot.emmc_checksum=3 androidboot.warranty_bit=1 androidboot.bootloader=SC02FOMSGPL2 androidboot.nvdata_backup=0 androidboot.boot_recovery=0 uart_dbg=0 sec_debug.pm8941_rev=3 sec_debug.pm8841_rev=2 vmalloc=450m level=0x574f4c44 androidboot.emmc=true androidboot.serialno=471d03d4 androidboot.baseband=msm
- 02-01 21:12:15.556 0 0 F sec_dbg_setup: str=@0x10100008
- 02-01 21:12:15.556 0 0 F sec_dbg_setup: secdbg_paddr = 0x10100008
- 02-01 21:12:15.556 0 0 F sec_dbg_setup: secdbg_size = 0x80000
- 02-01 21:12:15.556 0 0 I get_lcd_id_cmdline: LCD_ID = 0x408047, lcd_attached =1
- 02-01 21:12:15.556 0 0 E sec_tsp_mode: LCD_ID = 0x408047, val: 0X408047, ret1: 0x0
- 02-01 21:12:15.556 0 0 I /root/sandpox/CM13.0/kernel/samsung/js01ltedcm/drivers/misc/max77803-muic.c get_if_pmic_inifo: 0827 (prerelease) (GCC) ) #102-01 21:12:15.556 0 0 I mdss_panel_current_hw_rev: 12
- 02-01 21:12:15.556 0 0 I : PID hash table entries: 4096 (order: 2, 16384 bytes)
- 02-01 21:12:15.556 0 0 I : Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
- 02-01 21:12:15.556 0 0 I : Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
- 02-01 21:12:15.556 0 0 I : allocated 6291456 bytes of page_cgroup
- 02-01 21:12:15.556 0 0 I : please try 'cgroup_disable=memory' option if you don't want memory cgroups
- 02-01 21:12:15.556 0 0 I Memory :
- 02-01 21:12:15.556 0 0 W : 108MB
- 02-01 21:12:15.556 0 0 W : 2744MB
- 02-01 21:12:15.556 0 0 W : = 2852MB total
- 02-01 21:12:15.556 0 0 I Memory : 2557452k/2557452k available, 434676k reserved, 2086912K highmem
- 02-01 21:12:15.556 0 0 I : Virtual kernel memory layout:
- 02-01 21:12:15.556 0 0 I vmalloc : 0xec800000 - 0xff000000 ( 296 MB)
- 02-01 21:12:15.556 0 0 I lowmem : 0xd0200000 - 0xec400000 ( 450 MB)
- 02-01 21:12:15.556 0 0 I vmalloc : 0xc6c00000 - 0xd0200000 ( 150 MB)
- 02-01 21:12:15.556 0 0 I lowmem : 0xc0000000 - 0xc6c00000 ( 108 MB)
- 02-01 21:12:15.556 0 0 I pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
- 02-01 21:12:15.556 0 0 I SLUB : Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
- 02-01 21:12:15.556 0 0 I : Preemptible hierarchical RCU implementation.
- 02-01 21:12:15.556 0 0 I NR_IRQS : 16 nr_irqs:16 16
- 02-01 21:12:15.556 0 0 I sched_clock: 32 bits at 19MHz, resolution 52ns, wraps every 223696ms
- 02-01 21:12:15.556 0 0 I : Switching to timer-based delay loop
- 02-01 21:12:15.556 0 0 I Console : colour dummy device 80x30
- 02-01 21:12:15.556 0 0 I : Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
- 02-01 21:12:15.556 0 0 I pid_max : default: 32768 minimum: 301
- 02-01 21:12:15.556 0 0 I : Security Framework initialized
- 02-01 21:12:15.556 0 0 I SELinux : Initializing.
- 02-01 21:12:15.556 0 0 D SELinux : Starting in permissive mode
- 02-01 21:12:15.556 0 0 I : Mount-cache hash table entries: 512
- 02-01 21:12:15.557 0 0 I : Initializing cgroup subsys debug
- 02-01 21:12:15.557 0 0 I : Initializing cgroup subsys cpuacct
- 02-01 21:12:15.557 0 0 I : Initializing cgroup subsys memory
- 02-01 21:12:15.557 0 0 I : Initializing cgroup subsys freezer
- 02-01 21:12:15.557 0 0 I : CPU: Testing write buffer coherency:
- 02-01 21:12:15.557 0 0 W : ok
- 02-01 21:12:15.557 0 0 I CPU0 : thread -1, cpu 0, socket 0, mpidr 80000000
- 02-01 21:12:15.557 0 0 I hw perfevents: enabled with ARMv7 Krait PMU driver, 5 counters available
- 02-01 21:12:15.560 0 0 I : Setting up static identity map for 0xb41e48 - 0xb41ed0
- 02-01 21:12:15.560 0 0 I : MSM Memory Dump table set up
- 02-01 21:12:15.560 0 0 E : set_dload_mode <1> ( c110ffe4 )
- 02-01 21:12:15.561 0 0 I CPU1 : thread -1, cpu 1, socket 0, mpidr 80000001
- 02-01 21:12:15.562 0 0 I CPU2 : thread -1, cpu 2, socket 0, mpidr 80000002
- 02-01 21:12:15.563 0 0 I CPU3 : thread -1, cpu 3, socket 0, mpidr 80000003
- 02-01 21:12:15.563 0 0 I : Brought up 4 CPUs
- 02-01 21:12:15.563 0 0 I SMP : Total of 4 processors activated (153.60 BogoMIPS).
- 02-01 21:12:15.575 0 0 I : VFP support v0.3:
- 02-01 21:12:15.575 0 0 W : implementor 51 architecture 64 part 6f variant 2 rev 0
- 02-01 21:12:15.575 0 0 I [suspend helper] suspend_helper_init: init done
- 02-01 21:12:15.576 0 0 I dummy :
- 02-01 21:12:15.587 0 0 I NET : Registered protocol family 16
- 02-01 21:12:15.590 0 0 I DMA : preallocated 256 KiB pool for atomic coherent allocations
- 02-01 21:12:15.592 0 0 F sec_debug_init: enable=0
- 02-01 21:12:15.592 0 0 F sec_debug_init: __raw_readl restart_reason=305419896
- 02-01 21:12:15.592 0 0 F sec_debug_init: restart_reason : 0xfa00a65c
- 02-01 21:12:15.593 0 0 I KPI : Bootloader start count = 32530
- 02-01 21:12:15.593 0 0 I KPI : Bootloader end count = 137902
- 02-01 21:12:15.593 0 0 I KPI : Bootloader display count = 62176
- 02-01 21:12:15.593 0 0 I KPI : Bootloader load kernel count = 1637
- 02-01 21:12:15.593 0 0 I KPI : Kernel MPM timestamp = 244337
- 02-01 21:12:15.593 0 0 I KPI : Kernel MPM Clock frequency = 32768
- 02-01 21:12:15.593 0 0 I socinfo_print: v8, id=126, ver=2.2, raw_id=1968, raw_ver=7, hw_plat=1, hw_plat_ver=65536
- 02-01 21:12:15.593 0 0 E msm_8974_init_gpiomux: 2701 socinfo_get_version 20002
- 02-01 21:12:15.593 0 0 E msm_gpiomux_install: write failure: status[-22] gpio[-1]
- 02-01 21:12:15.593 0 0 E msm_gpiomux_install: write failure: status[-22] gpio[-1]
- 02-01 21:12:15.607 0 0 I gpiochip_add: registered GPIOs 0 to 145 on device: msmgpio
- 02-01 21:12:15.626 0 0 I : WDOG_V2 handled by TZ:dump @0xead4c000 PA:2ad4c000
- 02-01 21:12:15.627 0 0 I msm_watchdog f9017000.qcom,wdt: MSM Watchdog Initialized
- 02-01 21:12:15.649 0 0 I 8841_s1 : 675 <--> 1050 mV at 0 mV normal idle
- 02-01 21:12:15.649 0 0 I 8841_s1_ao: 675 <--> 1050 mV at 0 mV normal idle
- 02-01 21:12:15.650 0 0 I 8841_s1_so: 675 <--> 1050 mV at 675 mV normal idle
- 02-01 21:12:15.650 0 0 I 8841_s2 : 500 <--> 1050 mV at 0 mV normal idle
- 02-01 21:12:15.651 0 0 I 8841_s2_corner: 0 <--> 0 mV at 0 mV normal idle
- 02-01 21:12:15.651 0 0 I 8841_s2_corner_ao: 0 <--> 0 mV at 0 mV normal idle
- 02-01 21:12:15.651 0 0 I 8841_s2_floor_corner: 0 <--> 0 mV at 0 mV normal idle
- 02-01 21:12:15.652 0 0 I 8841_s3 : 1050 mV normal idle
- 02-01 21:12:15.652 0 0 I 8841_s4 : 815 <--> 900 mV at 0 mV normal idle
- 02-01 21:12:15.652 0 0 I 8841_s4_corner: 0 <--> 0 mV at 0 mV normal idle
- 02-01 21:12:15.653 0 0 I 8841_s4_floor_corner: 0 <--> 0 mV at 0 mV normal idle
- 02-01 21:12:15.653 0 0 I 8941_s1 : 1300 mV normal idle
- 02-01 21:12:15.654 0 0 I 8941_s2 : 2150 mV normal idle
- 02-01 21:12:15.654 0 0 I 8941_s3 : 1800 mV normal idle
- 02-01 21:12:15.654 0 0 I 8941_l1 : 1200 mV normal idle
- 02-01 21:12:15.655 0 0 I 8941_l2 : 1200 mV normal idle
- 02-01 21:12:15.655 0 0 I 8941_l3 : 1050 <--> 1225 mV at 1050 mV normal idle
- 02-01 21:12:15.656 0 0 I 8941_l4 : 1225 mV normal idle
- 02-01 21:12:15.656 0 0 I 8941_l5 : 1800 mV normal idle
- 02-01 21:12:15.656 0 0 I 8941_l6 : 1800 mV normal idle
- 02-01 21:12:15.657 0 0 I 8941_l7 : 1800 mV normal idle
- 02-01 21:12:15.657 0 0 I 8941_l8 : 1800 mV normal idle
- 02-01 21:12:15.658 0 0 I 8941_l9 : 1800 <--> 2950 mV at 2950 mV normal idle
- 02-01 21:12:15.658 0 0 I 8941_l10: 1800 mV normal idle
- 02-01 21:12:15.658 0 0 I 8941_l11: 1200 <--> 1350 mV at 1300 mV normal idle
- 02-01 21:12:15.659 0 0 I 8941_l12: 1800 mV normal idle
- 02-01 21:12:15.659 0 0 I 8941_l12_ao: 1800 mV normal idle
- 02-01 21:12:15.660 0 0 I 8941_l13: 1800 <--> 3300 mV at 2950 mV normal idle
- 02-01 21:12:15.660 0 0 I 8941_l14: 1800 mV normal idle
- 02-01 21:12:15.660 0 0 I 8941_l15: 2050 mV normal idle
- 02-01 21:12:15.661 0 0 I 8941_l16: 2700 mV normal idle
- 02-01 21:12:15.661 0 0 I 8941_l17: 2850 <--> 3000 mV at 3000 mV normal idle
- 02-01 21:12:15.662 0 0 I 8941_l18: 2850 mV normal idle
- 02-01 21:12:15.662 0 0 I 8941_l19: 2900 <--> 3350 mV at 2900 mV normal idle
- 02-01 21:12:15.662 0 0 I 8941_l20: 2950 mV normal idle
- 02-01 21:12:15.663 0 0 I 8941_l21: 2950 mV normal idle
- 02-01 21:12:15.663 0 0 I 8941_l22: 2500 <--> 3000 mV at 2500 mV normal idle
- 02-01 21:12:15.664 0 0 I 8941_l23: 2400 <--> 3300 mV at 3000 mV normal idle
- 02-01 21:12:15.664 0 0 I 8941_l24: 3075 mV normal idle
- 02-01 21:12:15.664 0 0 I 8941_lvs1:
- 02-01 21:12:15.665 0 0 I 8941_lvs2:
- 02-01 21:12:15.665 0 0 I 8941_lvs3:
- 02-01 21:12:15.667 0 0 I PDN krait_pdn_phase_scaling_init: eFuse phase scaling factor = 1/4
- 02-01 21:12:15.667 0 0 I PDN krait_pdn_phase_scaling_init: initial phase scaling factor = 1/4
- 02-01 21:12:15.668 0 0 I krait0 : 500 <--> 1100 mV at 900 mV fast normal idle
- 02-01 21:12:15.668 0 0 I krait1 : 500 <--> 1100 mV at 900 mV fast normal idle
- 02-01 21:12:15.668 0 0 I krait2 : 500 <--> 1100 mV at 900 mV fast normal idle
- 02-01 21:12:15.669 0 0 I krait3 : 500 <--> 1100 mV at 900 mV fast normal idle
- 02-01 21:12:15.673 0 0 I edp_pixel_get_div: div=1
- 02-01 21:12:15.673 0 0 I edp_mainlink_get_rate: rate=0 div=5
- 02-01 21:12:15.673 0 0 I edp_mainlink_get_rate: rate=0 div=5
- 02-01 21:12:15.701 0 0 I msm-thermal qcom,msm-thermal.74: probe_therm_reset:Failed reading node=/soc/qcom,msm-thermal, key=qcom,therm-reset-temp err=-22. KTM continues
- 02-01 21:12:15.702 0 0 I msm_thermal: vdd_restriction_reg_init Defer vdd rstr freq init.
- 02-01 21:12:15.702 0 0 I msm-thermal qcom,msm-thermal.74: probe_ocr:Failed reading node=/soc/qcom,msm-thermal, key=qti,pmic-opt-curr-temp. KTM continues
- 02-01 21:12:15.702 0 0 I msm-thermal qcom,msm-thermal.74: probe_thermal_efuse_read:Failed reading node=/soc/qcom,msm-thermal, key=qcom,efuse-data. KTM continues
- 02-01 21:12:15.702 0 0 E msm_thermal: msm_thermal_get_freq_table error reading cpufreq table
- 02-01 21:12:15.703 0 0 W 8941_l18: Failed to create debugfs directory
- 02-01 21:12:15.703 0 0 W 8941_lvs1: Failed to create debugfs directory
- 02-01 21:12:15.703 0 0 I sensor_hub_init: power on
- 02-01 21:12:15.704 0 0 I hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
- 02-01 21:12:15.704 0 0 I hw-breakpoint: maximum watchpoint size is 8 bytes.
- 02-01 21:12:15.707 0 0 I 8941_boost: 5000 mV
- 02-01 21:12:15.707 0 0 I 8941_mvs1:
- 02-01 21:12:15.707 0 0 I 8941_mvs1: supplied by 8941_boost
- 02-01 21:12:15.708 0 0 I 8941_mvs2:
- 02-01 21:12:15.708 0 0 I 8941_mvs2: supplied by 8941_boost
- 02-01 21:12:15.712 0 0 I sps : BAM 0xf9984000 (va:0xc6ce0000) enabled: ver:0x6, number of pipes:20
- 02-01 21:12:15.712 0 0 I sps : BAM 0xf9984000 is registered.
- 02-01 21:12:15.714 0 0 I sps : sps is ready.
- 02-01 21:12:15.714 0 0 I gdsc_venus:
- 02-01 21:12:15.715 0 0 I gdsc_mdss:
- 02-01 21:12:15.715 0 0 I gdsc_jpeg:
- 02-01 21:12:15.715 0 0 I gdsc_vfe:
- 02-01 21:12:15.715 0 0 I gdsc_oxili_gx:
- 02-01 21:12:15.715 0 0 I gdsc_oxili_gx: supplied by 8841_s4_corner
- 02-01 21:12:15.716 0 0 I gdsc_oxili_cx:
- 02-01 21:12:15.716 0 0 I gdsc_usb_hsic:
- 02-01 21:12:15.717 0 0 E AXI : msm_bus_fabric_init_driver(): msm_bus_fabric_init_driver
- 02-01 21:12:15.722 0 0 I msm_ocmem fdd00000.qcom,ocmem: OCMEM Virtual addr c6e00000
- 02-01 21:12:15.723 0 0 I : Physical OCMEM zone layout:
- 02-01 21:12:15.723 0 0 I zone graphics: 0xfec00000 - 0xfecfffff (1024 KB)
- 02-01 21:12:15.723 0 0 I zone lp_audio: 0xfed00000 - 0xfed7ffff ( 512 KB)
- 02-01 21:12:15.723 0 0 I zone video: 0xfed00000 - 0xfed7ffff ( 512 KB)
- 02-01 21:12:15.745 0 0 I bio : create slab <bio-0> at 0
- 02-01 21:12:15.745 0 0 I ethernet_phy:
- 02-01 21:12:15.746 0 0 I vph_pwr :
- 02-01 21:12:15.746 0 0 I platform regulator-tpd4s214.103: Driver reg-fixed-voltage requests probe deferral
- 02-01 21:12:15.747 0 0 I cma : Assigned CMA region at 0 to 8.qcom,ion-heap device
- 02-01 21:12:15.747 0 0 E ION-heap mm: Cannot specify alignment for this type of heap
- 02-01 21:12:15.747 0 0 I cma : Assigned CMA region at 0 to 16.qcom,ion-heap device
- 02-01 21:12:15.747 0 0 E ION-heap adsp: Cannot specify alignment for this type of heap
- 02-01 21:12:15.747 0 0 I cma : Assigned CMA region at 0 to 1b.qcom,ion-heap device
- 02-01 21:12:15.748 0 0 I : ION heap wb created at 0xbba00000 with size 1e00000
- 02-01 21:12:15.748 0 0 I : ION heap iommuca created
- 02-01 21:12:15.748 0 0 I : ION heap system created
- 02-01 21:12:15.748 0 0 I : ION heap kmalloc created
- 02-01 21:12:15.748 0 0 I : ION heap mm created at 0xb1000000 with size a500000
- 02-01 21:12:15.748 0 0 I : ION heap adsp created at 0xacc00000 with size 4100000
- 02-01 21:12:15.748 0 0 I : ION heap qsecom created at 0xab800000 with size 1100000
- 02-01 21:12:15.748 0 0 I : ION heap audio created at 0xbd800000 with size 614000
- 02-01 21:12:15.748 0 0 I : ION heap pil_1 created at 0x0f500000 with size 500000
- 02-01 21:12:15.750 0 0 I : SCSI subsystem initialized
- 02-01 21:12:15.750 0 0 I usbcore : registered new interface driver usbfs
- 02-01 21:12:15.750 0 0 I usbcore : registered new interface driver hub
- 02-01 21:12:15.750 0 0 I usbcore : registered new device driver usb
- 02-01 21:12:15.751 0 0 I max77803 13-0066: max77803_i2c_probe
- 02-01 21:12:15.751 0 0 I of_max77803_dt: irq-gpio: 102
- 02-01 21:12:15.751 0 0 I of_max77803_dt: irq-base: 353
- 02-01 21:12:15.751 0 0 I of_max77803_dt: wc-irq-gpio: 0
- 02-01 21:12:15.751 0 0 I of_max77803_dt: timeout: 0
- 02-01 21:12:15.751 0 0 I of_max77803_dt: duty: 0
- 02-01 21:12:15.751 0 0 I of_max77803_dt: period: 0
- 02-01 21:12:15.751 0 0 I of_max77803_dt: pwm_id: 0
- 02-01 21:12:15.751 0 0 I max77803_i2c_probe: device found: rev.0x1, ver.0x0
- 02-01 21:12:15.752 0 0 I func : max77803_irq_init, irq_gpio: 102, irq_base: 353
- 02-01 21:12:15.754 0 0 E : Trying to set irq flags for IRQ353
- 02-01 21:12:15.754 0 0 E : Trying to set irq flags for IRQ354
- 02-01 21:12:15.754 0 0 E : Trying to set irq flags for IRQ355
- 02-01 21:12:15.754 0 0 E : Trying to set irq flags for IRQ356
- 02-01 21:12:15.754 0 0 E : Trying to set irq flags for IRQ357
- 02-01 21:12:15.754 0 0 E : Trying to set irq flags for IRQ358
- 02-01 21:12:15.754 0 0 E : Trying to set irq flags for IRQ359
- 02-01 21:12:15.754 0 0 E : Trying to set irq flags for IRQ360
- 02-01 21:12:15.754 0 0 E : Trying to set irq flags for IRQ361
- 02-01 21:12:15.754 0 0 E : Trying to set irq flags for IRQ362
- 02-01 21:12:15.754 0 0 E : Trying to set irq flags for IRQ363
- 02-01 21:12:15.754 0 0 E : Trying to set irq flags for IRQ364
- 02-01 21:12:15.754 0 0 E : Trying to set irq flags for IRQ365
- 02-01 21:12:15.754 0 0 E : Trying to set irq flags for IRQ366
- 02-01 21:12:15.754 0 0 E : Trying to set irq flags for IRQ367
- 02-01 21:12:15.754 0 0 E : Trying to set irq flags for IRQ368
- 02-01 21:12:15.754 0 0 E : Trying to set irq flags for IRQ369
- 02-01 21:12:15.754 0 0 E : Trying to set irq flags for IRQ370
- 02-01 21:12:15.754 0 0 E : Trying to set irq flags for IRQ371
- 02-01 21:12:15.754 0 0 E : Trying to set irq flags for IRQ372
- 02-01 21:12:15.754 0 0 E : Trying to set irq flags for IRQ373
- 02-01 21:12:15.754 0 0 E : Trying to set irq flags for IRQ374
- 02-01 21:12:15.754 0 0 E : Trying to set irq flags for IRQ375
- 02-01 21:12:15.754 0 0 E : Trying to set irq flags for IRQ376
- 02-01 21:12:15.754 0 0 E : Trying to set irq flags for IRQ377
- 02-01 21:12:15.754 0 0 E : Trying to set irq flags for IRQ378
- 02-01 21:12:15.754 0 0 E : Trying to set irq flags for IRQ379
- 02-01 21:12:15.754 0 0 E : Trying to set irq flags for IRQ380
- 02-01 21:12:15.754 0 0 E : Trying to set irq flags for IRQ381
- 02-01 21:12:15.754 0 0 E : Trying to set irq flags for IRQ382
- 02-01 21:12:15.756 0 0 I max77803-safeout: max77803_pmic_probe
- 02-01 21:12:15.756 0 0 I [/root/sandpox/CM13.0/kernel/samsung/js01ltedcm/drivers/regulator/max77803-regulator.c:489] pd rm02-01 21:12:15.756 0 0 I : [/root/sandpox/CM13.0/kernel/samsung/js01ltedcm/drivers/regulator/max77803-regulator.c:495] for in pdata->num_regulators:3
- 02-01 21:12:15.756 0 0 I regulator.59: func:max77803_reg_enable
- 02-01 21:12:15.757 0 0 I regulator.59: func:max77803_get_voltage
- 02-01 21:12:15.757 0 0 I regulator.59: func:max77803_get_voltage_register
- 02-01 21:12:15.757 0 0 I regulator.59: func:max77803_list_voltage_safeout
- 02-01 21:12:15.757 0 0 I safeout1 range: at 4900 mV
- 02-01 21:12:15.757 0 0 I regulator.59: func:max77803_get_voltage
- 02-01 21:12:15.757 0 0 I regulator.59: func:max77803_get_voltage_register
- 02-01 21:12:15.757 0 0 I regulator.59: func:max77803_list_voltage_safeout
- 02-01 21:12:15.758 0 0 E : Error-Bad Function Input
- 02-01 21:12:15.758 0 0 I : [/root/sandpox/CM13.0/kernel/samsung/js01ltedcm/drivers/regulator/max77803-regulator.c:495] for in pdata->num_regulators:3
- 02-01 21:12:15.758 0 0 I regulator.60: func:max77803_get_voltage
- 02-01 21:12:15.758 0 0 I regulator.60: func:max77803_get_voltage_register
- 02-01 21:12:15.758 0 0 I regulator.60: func:max77803_list_voltage_safeout
- 02-01 21:12:15.758 0 0 I safeout2 range: at 4900 mV
- 02-01 21:12:15.758 0 0 I regulator.60: func:max77803_get_voltage
- 02-01 21:12:15.758 0 0 I regulator.60: func:max77803_get_voltage_register
- 02-01 21:12:15.759 0 0 I regulator.60: func:max77803_list_voltage_safeout
- 02-01 21:12:15.759 0 0 E : Error-Bad Function Input
- 02-01 21:12:15.759 0 0 I : [/root/sandpox/CM13.0/kernel/samsung/js01ltedcm/drivers/regulator/max77803-regulator.c:495] for in pdata->num_regulators:3
- 02-01 21:12:15.759 0 0 I regulator.61: func:max77803_reg_enable
- 02-01 21:12:15.759 0 0 I regulator.61: func:max77803_get_voltage
- 02-01 21:12:15.759 0 0 I regulator.61: func:max77803_get_voltage_register
- 02-01 21:12:15.760 0 0 I regulator.61: func:max77803_list_voltage
- 02-01 21:12:15.760 0 0 I CHARGER : 60 <--> 2580 mA at 360 mA
- 02-01 21:12:15.760 0 0 I i2c-gpio i2c.86: using pins 60 (SDA) and 61 (SCL)
- 02-01 21:12:15.761 0 0 I i2c-gpio i2c.90: using pins 87 (SDA) and 88 (SCL)
- 02-01 21:12:15.761 0 0 I i2c-gpio i2c.91: using pins 95 (SDA) and 96 (SCL)
- 02-01 21:12:15.761 0 0 I i2c-gpio i2c.92: using pins 109 (SDA) and 108 (SCL)
- 02-01 21:12:15.762 0 0 D gpio_request: gpio-60 (sda) status -16
- 02-01 21:12:15.762 0 0 W i2c-gpio: probe of i2c.93 failed with error -16
- 02-01 21:12:15.762 0 0 I i2c-gpio i2c.97: using pins 55 (SDA) and 56 (SCL)
- 02-01 21:12:15.763 0 0 I : Linux media interface: v0.10
- 02-01 21:12:15.763 0 0 I : Linux video capture interface: v2.00
- 02-01 21:12:15.765 0 0 I msm_iommu_v1 fda64000.qcom,iommu: device jpeg_iommu mapped at c6fa0000, with 3 ctx banks
- 02-01 21:12:15.766 0 0 I msm_iommu_v1 fd928000.qcom,iommu: device mdp_iommu mapped at c6fc0000, with 3 ctx banks
- 02-01 21:12:15.768 0 0 I msm_iommu_v1 fdc84000.qcom,iommu: device venus_iommu mapped at c6fe0000, with 5 ctx banks
- 02-01 21:12:15.769 0 0 I msm_iommu_v1 fdb10000.qcom,iommu: device kgsl_iommu mapped at c7000000, with 3 ctx banks
- 02-01 21:12:15.770 0 0 I msm_iommu_v1 fda44000.qcom,iommu: device vfe_iommu mapped at c7020000, with 3 ctx banks
- 02-01 21:12:15.771 0 0 I msm_iommu_ctx_v1 fda6c000.qcom,iommu-ctx: context jpeg_enc0 using bank 0
- 02-01 21:12:15.771 0 0 I msm_iommu_ctx_v1 fda6d000.qcom,iommu-ctx: context jpeg_enc1 using bank 1
- 02-01 21:12:15.772 0 0 I msm_iommu_ctx_v1 fda6e000.qcom,iommu-ctx: context jpeg_dec using bank 2
- 02-01 21:12:15.772 0 0 I msm_iommu_ctx_v1 fd930000.qcom,iommu-ctx: context mdp_0 using bank 0
- 02-01 21:12:15.772 0 0 I msm_iommu_ctx_v1 fd931000.qcom,iommu-ctx: context mdp_1 using bank 1
- 02-01 21:12:15.772 0 0 I msm_iommu_ctx_v1 fd932000.qcom,iommu-ctx: context mdp_2 using bank 2
- 02-01 21:12:15.772 0 0 I msm_iommu_ctx_v1 fdc8c000.qcom,iommu-ctx: context venus_ns using bank 0
- 02-01 21:12:15.772 0 0 I msm_iommu_ctx_v1 fdc8d000.qcom,iommu-ctx: context venus_sec_bitstream using bank 1
- 02-01 21:12:15.773 0 0 I msm_iommu_ctx_v1 fdc8e000.qcom,iommu-ctx: context venus_fw using bank 2
- 02-01 21:12:15.773 0 0 I msm_iommu_ctx_v1 fdc8f000.qcom,iommu-ctx: context venus_sec_pixel using bank 3
- 02-01 21:12:15.773 0 0 I msm_iommu_ctx_v1 fdc90000.qcom,iommu-ctx: context venus_sec_non_pixel using bank 4
- 02-01 21:12:15.773 0 0 I msm_iommu_ctx_v1 fdb18000.qcom,iommu-ctx: context gfx3d_user using bank 0
- 02-01 21:12:15.773 0 0 I msm_iommu_ctx_v1 fdb19000.qcom,iommu-ctx: context gfx3d_priv using bank 1
- 02-01 21:12:15.773 0 0 I msm_iommu_ctx_v1 fdb1a000.qcom,iommu-ctx: context gfx3d_spare using bank 2
- 02-01 21:12:15.773 0 0 I msm_iommu_ctx_v1 fda4c000.qcom,iommu-ctx: context vfe0 using bank 0
- 02-01 21:12:15.774 0 0 I msm_iommu_ctx_v1 fda4d000.qcom,iommu-ctx: context vfe1 using bank 1
- 02-01 21:12:15.774 0 0 I msm_iommu_ctx_v1 fda4e000.qcom,iommu-ctx: context cpp using bank 2
- 02-01 21:12:15.776 0 0 I : [SENSORS CORE] sensors_class_init
- 02-01 21:12:15.776 0 0 I : Advanced Linux Sound Architecture Driver Version 1.0.25.
- 02-01 21:12:15.776 0 0 I Bluetooth: Core ver 2.16
- 02-01 21:12:15.776 0 0 I NET : Registered protocol family 31
- 02-01 21:12:15.776 0 0 I Bluetooth: HCI device and connection manager initialized
- 02-01 21:12:15.776 0 0 I Bluetooth: HCI socket layer initialized
- 02-01 21:12:15.776 0 0 I Bluetooth: L2CAP socket layer initialized
- 02-01 21:12:15.777 0 0 I Bluetooth: SCO socket layer initialized
- 02-01 21:12:15.777 0 0 I cfg80211: Calling CRDA to update world regulatory domain
- 02-01 21:12:15.779 0 0 I : Switching to clocksource arch_sys_counter
- 02-01 21:12:15.817 0 0 I NET : Registered protocol family 2
- 02-01 21:12:15.817 0 0 I : IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
- 02-01 21:12:15.818 0 0 I : TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
- 02-01 21:12:15.820 0 0 I : TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
- 02-01 21:12:15.820 0 0 I TCP : Hash tables configured (established 131072 bind 65536)
- 02-01 21:12:15.820 0 0 I TCP : reno registered
- 02-01 21:12:15.820 0 0 I : UDP hash table entries: 512 (order: 2, 16384 bytes)
- 02-01 21:12:15.820 0 0 I : UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
- 02-01 21:12:15.821 0 0 I NET : Registered protocol family 1
- 02-01 21:12:15.821 0 0 I : Trying to unpack rootfs image as initramfs...
- 02-01 21:12:15.905 0 0 I : Freeing initrd memory: 1200K
- 02-01 21:12:15.910 0 0 I FIPS : self-tests for aes-asm (aes) passed
- 02-01 21:12:15.911 0 0 I FIPS : self-tests for sha1-asm (sha1) passed
- 02-01 21:12:15.911 0 0 I FIPS : self-tests for sha1-neon (sha1) passed
- 02-01 21:12:15.912 0 0 I FIPS : self-tests for sha256-asm (sha256) passed
- 02-01 21:12:15.912 0 0 I FIPS : self-tests for sha224-asm (sha224) passed
- 02-01 21:12:15.912 0 0 I FIPS : self-tests for sha256-neon (sha256) passed
- 02-01 21:12:15.912 0 0 I FIPS : self-tests for sha224-neon (sha224) passed
- 02-01 21:12:15.912 0 0 I FIPS : self-tests for sha512-neon (sha512) passed
- 02-01 21:12:15.913 0 0 I FIPS : self-tests for sha384-neon (sha384) passed
- 02-01 21:12:15.913 0 0 I : Detected 9 counters on the L2CC PMU.
- 02-01 21:12:15.915 0 0 D gpiochip_find_base: found new base at 992
- 02-01 21:12:15.915 0 0 I gpiochip_add: registered GPIOs 992 to 1023 on device: smp2p
- 02-01 21:12:15.915 0 0 D gpiochip_find_base: found new base at 960
- 02-01 21:12:15.916 0 0 I gpiochip_add: registered GPIOs 960 to 991 on device: smp2p
- 02-01 21:12:15.916 0 0 D gpiochip_find_base: found new base at 928
- 02-01 21:12:15.916 0 0 I gpiochip_add: registered GPIOs 928 to 959 on device: smp2p
- 02-01 21:12:15.916 0 0 D gpiochip_find_base: found new base at 896
- 02-01 21:12:15.916 0 0 I gpiochip_add: registered GPIOs 896 to 927 on device: smp2p
- 02-01 21:12:15.916 0 0 D gpiochip_find_base: found new base at 864
- 02-01 21:12:15.916 0 0 I gpiochip_add: registered GPIOs 864 to 895 on device: slave-kernel
- 02-01 21:12:15.917 0 0 D gpiochip_find_base: found new base at 832
- 02-01 21:12:15.917 0 0 I gpiochip_add: registered GPIOs 832 to 863 on device: master-kernel
- 02-01 21:12:15.917 0 0 D gpiochip_find_base: found new base at 800
- 02-01 21:12:15.917 0 0 I gpiochip_add: registered GPIOs 800 to 831 on device: smp2p
- 02-01 21:12:15.918 0 0 D gpiochip_find_base: found new base at 768
- 02-01 21:12:15.918 0 0 I gpiochip_add: registered GPIOs 768 to 799 on device: smp2p
- 02-01 21:12:15.918 0 0 D gpiochip_find_base: found new base at 736
- 02-01 21:12:15.918 0 0 I gpiochip_add: registered GPIOs 736 to 767 on device: slave-kernel
- 02-01 21:12:15.919 0 0 D gpiochip_find_base: found new base at 704
- 02-01 21:12:15.919 0 0 I gpiochip_add: registered GPIOs 704 to 735 on device: master-kernel
- 02-01 21:12:15.919 0 0 D gpiochip_find_base: found new base at 672
- 02-01 21:12:15.919 0 0 I gpiochip_add: registered GPIOs 672 to 703 on device: smp2p
- 02-01 21:12:15.920 0 0 D gpiochip_find_base: found new base at 640
- 02-01 21:12:15.920 0 0 I gpiochip_add: registered GPIOs 640 to 671 on device: smp2p
- 02-01 21:12:15.920 0 0 D gpiochip_find_base: found new base at 608
- 02-01 21:12:15.920 0 0 I gpiochip_add: registered GPIOs 608 to 639 on device: slave-kernel
- 02-01 21:12:15.920 0 0 D gpiochip_find_base: found new base at 576
- 02-01 21:12:15.920 0 0 I gpiochip_add: registered GPIOs 576 to 607 on device: master-kernel
- 02-01 21:12:15.921 0 0 D gpiochip_find_base: found new base at 544
- 02-01 21:12:15.921 0 0 I gpiochip_add: registered GPIOs 544 to 575 on device: rdbg
- 02-01 21:12:15.921 0 0 D gpiochip_find_base: found new base at 512
- 02-01 21:12:15.921 0 0 I gpiochip_add: registered GPIOs 512 to 543 on device: rdbg
- 02-01 21:12:15.921 0 0 D gpiochip_find_base: found new base at 480
- 02-01 21:12:15.922 0 0 I gpiochip_add: registered GPIOs 480 to 511 on device: rdbg
- 02-01 21:12:15.922 0 0 D gpiochip_find_base: found new base at 448
- 02-01 21:12:15.922 0 0 I gpiochip_add: registered GPIOs 448 to 479 on device: rdbg
- 02-01 21:12:15.924 0 0 I pil-q6v5-lpass fe200000.qcom,lpass: using secure boot
- 02-01 21:12:15.928 0 0 I pil_venus fdce0000.qcom,venus: using secure boot
- 02-01 21:12:15.940 0 0 I NET : Registered protocol family 27
- 02-01 21:12:15.945 0 0 F : dma_test_init, minor number 64
- 02-01 21:12:15.946 0 0 I clock-krait-8974 f9016000.qcom,clock-krait: PVS config version: 1
- 02-01 21:12:15.946 0 0 I clock-krait-8974 f9016000.qcom,clock-krait: Speed bin: 1
- 02-01 21:12:15.946 0 0 I clock-krait-8974 f9016000.qcom,clock-krait: PVS bin: 1
- 02-01 21:12:15.946 0 0 I clock-krait-8974 f9016000.qcom,clock-krait: PVS version: 0
- 02-01 21:12:15.949 0 0 E msm_thermal: msm_thermal_get_freq_table error reading cpufreq table
- 02-01 21:12:15.949 0 0 I : L2 @ 729600 KHz
- 02-01 21:12:15.949 0 0 I : CPU0 @ 960000 KHz
- 02-01 21:12:15.949 0 0 I : CPU1 @ unknown rate. Forcing new rate.
- 02-01 21:12:15.950 0 0 I : CPU1 @ 300000 KHz
- 02-01 21:12:15.950 0 0 I : CPU2 @ unknown rate. Forcing new rate.
- 02-01 21:12:15.950 0 0 I : CPU2 @ 300000 KHz
- 02-01 21:12:15.950 0 0 I : CPU3 @ unknown rate. Forcing new rate.
- 02-01 21:12:15.950 0 0 I : CPU3 @ 300000 KHz
- 02-01 21:12:15.956 0 0 I brcm_wlan_init: gpio_to_irq IRQ=620
- 02-01 21:12:15.957 0 0 E brcm_init_wlan_mem: WIFI MEM Allocated
- 02-01 21:12:15.957 0 0 W : ####init
- 02-01 21:12:15.960 0 0 I SEC_MASTERSTATS: Init done
- 02-01 21:12:15.963 0 0 I msm_rpm_log_probe: OK
- 02-01 21:12:15.971 0 0 I : notifier sec_otg_register_booster 161: register max77803
- 02-01 21:12:15.979 0 0 I mpm_counter: [ 0.423306]:(256991)
- 02-01 21:12:15.984 0 0 I func : sec_therm_init
- 02-01 21:12:15.985 0 0 I sec-thermistor: sec_therm_probe: SEC Thermistor Driver Loading
- 02-01 21:12:15.985 0 0 I audit : initializing netlink socket (enabled)
- 02-01 21:12:15.985 0 0 W : highmem bounce pool size: 64 pages
- 02-01 21:12:15.988 0 0 I exFAT : Core Version 1.2.12
- 02-01 21:12:15.988 0 0 I exFAT : FS Version 1.2.12
- 02-01 21:12:15.988 0 0 I : Registering sdcardfs 0.1
- 02-01 21:12:15.988 0 0 I : NTFS driver 2.1.30 [Flags: R/W].
- 02-01 21:12:15.988 0 0 I : fuse init (API version 7.18)
- 02-01 21:12:15.988 0 0 D SELinux : Registering netfilter hooks
- 02-01 21:12:15.989 0 0 I FIPS : No test for cipher_null (cipher_null-generic)
- 02-01 21:12:15.989 0 0 I FIPS : No test for ecb(cipher_null) (ecb-cipher_null)
- 02-01 21:12:15.989 0 0 I FIPS : No test for digest_null (digest_null-generic)
- 02-01 21:12:15.989 0 0 I FIPS : No test for compress_null (compress_null-generic)
- 02-01 21:12:15.989 0 0 I FIPS : self-tests for non-FIPS md4-generic (md4) passed
- 02-01 21:12:15.989 0 0 I FIPS : self-tests for non-FIPS md5-generic (md5) passed
- 02-01 21:12:15.989 0 0 I FIPS : self-tests for sha1-generic (sha1) passed
- 02-01 21:12:15.989 0 0 I FIPS : self-tests for sha224-generic (sha224) passed
- 02-01 21:12:15.989 0 0 I FIPS : self-tests for sha256-generic (sha256) passed
- 02-01 21:12:15.989 0 0 I FIPS : self-tests for sha384-generic (sha384) passed
- 02-01 21:12:15.990 0 0 I FIPS : self-tests for sha512-generic (sha512) passed
- 02-01 21:12:15.990 0 0 I FIPS : self-tests for des-generic (des) passed
- 02-01 21:12:15.990 0 0 I FIPS : self-tests for des3_ede-generic (des3_ede) passed
- 02-01 21:12:15.990 0 0 I FIPS : self-tests for non-FIPS twofish-generic (twofish) passed
- 02-01 21:12:15.990 0 0 I FIPS : self-tests for aes-generic (aes) passed
- 02-01 21:12:15.990 0 0 I FIPS : self-tests for non-FIPS arc4-generic (arc4) passed
- 02-01 21:12:15.990 0 0 I FIPS : self-tests for non-FIPS deflate-generic (deflate) passed
- 02-01 21:12:15.990 0 0 I FIPS : self-tests for crc32c-generic (crc32c) passed
- 02-01 21:12:15.990 0 0 I FIPS : self-tests for non-FIPS lzo-generic (lzo) passed
- 02-01 21:12:15.990 0 0 I FIPS : No test for stdrng (krng)
- 02-01 21:12:15.999 0 0 I FIPS : self-tests for ansi_cprng (stdrng) passed
- 02-01 21:12:15.999 0 0 I FIPS : No test for fips(ansi_cprng) (fips_ansi_cprng)
- 02-01 21:12:15.999 0 0 E FIPS : Tcrypt Tests Start
- 02-01 21:12:15.999 0 0 I FIPS : self-tests for ecb(aes-generic) (ecb(aes)) passed
- 02-01 21:12:15.999 0 0 I FIPS : self-tests for ecb(aes-generic) (ecb(aes)) passed
- 02-01 21:12:15.999 0 0 I FIPS : self-tests for cbc(aes-generic) (cbc(aes)) passed
- 02-01 21:12:15.999 0 0 I FIPS : self-tests for cbc(aes-generic) (cbc(aes)) passed
- 02-01 21:12:16.000 0 0 I FIPS : self-tests for ecb(aes-asm) (ecb(aes)) passed
- 02-01 21:12:16.000 0 0 I FIPS : self-tests for ecb(aes-asm) (ecb(aes)) passed
- 02-01 21:12:16.000 0 0 I FIPS : self-tests for cbc(aes-asm) (cbc(aes)) passed
- 02-01 21:12:16.000 0 0 I FIPS : self-tests for cbc(aes-asm) (cbc(aes)) passed
- 02-01 21:12:16.000 0 0 I FIPS : self-tests for ecb(des3_ede-generic) (ecb(des3_ede)) passed
- 02-01 21:12:16.000 0 0 I FIPS : self-tests for ecb(des3_ede-generic) (ecb(des3_ede)) passed
- 02-01 21:12:16.000 0 0 I FIPS : self-tests for cbc(des3_ede-generic) (cbc(des3_ede)) passed
- 02-01 21:12:16.000 0 0 I FIPS : self-tests for cbc(des3_ede-generic) (cbc(des3_ede)) passed
- 02-01 21:12:16.000 0 0 I FIPS : self-tests for sha1-generic (sha1) passed
- 02-01 21:12:16.001 0 0 I FIPS : self-tests for sha224-generic (sha224) passed
- 02-01 21:12:16.001 0 0 I FIPS : self-tests for sha256-generic (sha256) passed
- 02-01 21:12:16.001 0 0 I FIPS : self-tests for sha384-generic (sha384) passed
- 02-01 21:12:16.001 0 0 I FIPS : self-tests for sha512-generic (sha512) passed
- 02-01 21:12:16.001 0 0 I FIPS : self-tests for sha1-asm (sha1) passed
- 02-01 21:12:16.001 0 0 I FIPS : self-tests for hmac(sha1-asm) (hmac(sha1)) passed
- 02-01 21:12:16.001 0 0 I FIPS : self-tests for hmac(sha1-asm) (hmac(sha1)) passed
- 02-01 21:12:16.001 0 0 I FIPS : self-tests for hmac(sha1-generic) (hmac(sha1)) passed
- 02-01 21:12:16.001 0 0 I FIPS : self-tests for hmac(sha1-generic) (hmac(sha1)) passed
- 02-01 21:12:16.001 0 0 I FIPS : self-tests for hmac(sha224-generic) (hmac(sha224)) passed
- 02-01 21:12:16.002 0 0 I FIPS : self-tests for hmac(sha224-generic) (hmac(sha224)) passed
- 02-01 21:12:16.002 0 0 I FIPS : self-tests for hmac(sha256-generic) (hmac(sha256)) passed
- 02-01 21:12:16.002 0 0 I FIPS : self-tests for hmac(sha256-generic) (hmac(sha256)) passed
- 02-01 21:12:16.002 0 0 I FIPS : self-tests for hmac(sha384-generic) (hmac(sha384)) passed
- 02-01 21:12:16.003 0 0 I FIPS : self-tests for hmac(sha384-generic) (hmac(sha384)) passed
- 02-01 21:12:16.003 0 0 I FIPS : self-tests for hmac(sha512-generic) (hmac(sha512)) passed
- 02-01 21:12:16.003 0 0 I FIPS : self-tests for hmac(sha512-generic) (hmac(sha512)) passed
- 02-01 21:12:16.012 0 0 I FIPS : self-tests for fips_ansi_cprng (ansi_cprng) passed
- 02-01 21:12:16.012 0 0 E FIPS : Tcrypt Tests End
- 02-01 21:12:16.135 0 0 I FIPS : Integrity Check Passed
- 02-01 21:12:16.135 0 0 E tcrypt : CRYPTO API started in FIPS mode!!!
- 02-01 21:12:16.135 0 0 I FIPS : self-tests for ghash-generic (ghash) passed
- 02-01 21:12:16.136 0 0 I : Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
- 02-01 21:12:16.136 0 0 I : io scheduler noop registered
- 02-01 21:12:16.136 0 0 I : io scheduler deadline registered
- 02-01 21:12:16.136 0 0 I : io scheduler row registered
- 02-01 21:12:16.136 0 0 I : io scheduler cfq registered (default)
- 02-01 21:12:16.136 0 0 D gpiochip_find_base: found new base at 444
- 02-01 21:12:16.136 0 0 I gpiochip_add: registered GPIOs 444 to 447 on device: pm8841-mpp
- 02-01 21:12:16.136 0 0 D qcom,qpnp-pin qpnp-pin-5: qpnp_pin_probe: gpio_chip registered between 444-447
- 02-01 21:12:16.137 0 0 D gpiochip_find_base: found new base at 408
- 02-01 21:12:16.137 0 0 I gpiochip_add: registered GPIOs 408 to 443 on device: pm8941-gpio
- 02-01 21:12:16.138 0 0 D qcom,qpnp-pin qpnp-pin-31: qpnp_pin_probe: gpio_chip registered between 408-443
- 02-01 21:12:16.139 0 0 D gpiochip_find_base: found new base at 401
- 02-01 21:12:16.139 0 0 I gpiochip_add: registered GPIOs 401 to 407 on device: pm8941-mpp
- 02-01 21:12:16.140 0 0 D qcom,qpnp-pin qpnp-pin-33: qpnp_pin_probe: gpio_chip registered between 401-407
- 02-01 21:12:16.140 0 0 I mdss_mdp_probe: mdss_mdp_probe : ++
- 02-01 21:12:16.140 0 0 I mdss_mdp_probe: MDP HW Base phy_Address=0xfd900000 virt=0xc7040000
- 02-01 21:12:16.140 0 0 I mdss_mdp_probe: MDSS VBIF HW Base phy_Address=0xfd924000 virt=0xc6fde000
- 02-01 21:12:16.140 0 0 E mdss_mdp_parse_dt_prop_len: Error from prop qcom,mdss-clk-levels : spec error in device tree
- 02-01 21:12:16.140 0 0 E mdss_mdp_parse_dt_prop_len: Error from prop qcom,mdss-ad-off : spec error in device tree
- 02-01 21:12:16.140 0 0 I mdss_mdp_parse_dt_ad_cfg: SS is not using assertive display
- 02-01 21:12:16.140 0 0 E mdss_mdp_parse_bootarg: mdss_mdp_parse_bootarg:1651:cmdline panel not set disp_idx=[ (null)]
- 02-01 21:12:16.141 0 0 I mdss_mdp_probe: mdss_mdp_probe : --
- 02-01 21:12:16.142 0 0 I : mdss_dsi_driver_init ++
- 02-01 21:12:16.142 0 0 I mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->0
- 02-01 21:12:16.142 0 0 I mdss_dsi_get_panel_cfg: 626: cfg:[]
- 02-01 21:12:16.142 0 0 W mdss_dsi_ctrl_probe: 1754:dsi specific cfg not present
- 02-01 21:12:16.142 0 0 I mdss_dsi_panel_init: Panel Name = samsung amoled 1080p video mode dsi S6E8FA0 panel
- 02-01 21:12:16.142 0 0 I mdss_dsi_parse_dcs_cmds: dcs_cmd=29 len=230, cmd_cnt=20 link_state=0
- 02-01 21:12:16.142 0 0 I mdss_dsi_parse_dcs_cmds: dcs_cmd=29 len=28, cmd_cnt=3 link_state=1
- 02-01 21:12:16.142 0 0 E mdss_samsung_parse_panel_cmd: 3344, Unable to read samsung,panel-mtp-read-cmds
- 02-01 21:12:16.142 0 0 E mdss_samsung_parse_panel_cmd: 3344, Unable to read samsung,panel-etc-hbm-evt0-second-cmds
- 02-01 21:12:16.142 0 0 E mdss_samsung_parse_panel_cmd: 3344, Unable to read samsung,panel-etc-hbm-evt1-cmds
- 02-01 21:12:16.142 0 0 E mdss_samsung_parse_panel_cmd: 3344, Unable to read samsung,panel-etc-hbm-evt1-second-cmds
- 02-01 21:12:16.142 0 0 E mdss_samsung_parse_panel_cmd: 3344, Unable to read samsung,panel-etc-hbm-evt1-revI-cmds
- 02-01 21:12:16.142 0 0 E mdss_samsung_parse_panel_cmd: 3344, Unable to read samsung,panel-etc-hbm-evt1-revJ-cmds
- 02-01 21:12:16.142 0 0 E mdss_samsung_parse_panel_cmd: 3344, Unable to read samsung,panel-aid-cmds-list-350
- 02-01 21:12:16.142 0 0 E mdss_samsung_parse_candella_lux_mapping_table: 3257, Unable to read table samsung,panel-candella-mapping-table-350
- 02-01 21:12:16.142 0 0 I mdss_dsi_panel_init: 4670 Continuous splash flag enabled.
- 02-01 21:12:16.142 0 0 I : [mdss_dsi_panel_init] CONFIG_MDNIE_LITE_TUNING ok ! init class called!
- 02-01 21:12:16.142 0 0 E : [mdnie lite] start!
- 02-01 21:12:16.142 0 0 E : [mdnie lite] end!
- 02-01 21:12:16.142 0 0 I dsi_panel_device_register: ++
- 02-01 21:12:16.142 0 0 I mdss_dsi_regulator_init: vregn(3)
- 02-01 21:12:16.142 0 0 I dsi_panel_device_register: 2027, broadcast (0)
- 02-01 21:12:16.142 0 0 E dsi_panel_device_register: 2074, Disp_en_gpio (421)
- 02-01 21:12:16.142 0 0 E dsi_panel_device_register: 2413, Disp_rst_gpio (426)
- 02-01 21:12:16.142 0 0 I mdss_dsi_retrieve_ctrl_resources: ctrl_base=c6ff2800 ctrl_size=1f8 phy_base=c6ff4b00 phy_size=2b0
- 02-01 21:12:16.143 0 0 I dsi_panel_device_register: splash enabled..panel_power_on (1)
- 02-01 21:12:16.143 0 0 I mdss_dsi_panel_power_on: enable=1 vregn(3)
- 02-01 21:12:16.143 0 0 I mdss_dsi_panel_power_on: Set High LCD Enable GPIO
- 02-01 21:12:16.170 0 0 I mdss_register_panel: adding framebuffer device fd922800.qcom,mdss_dsi
- 02-01 21:12:16.170 0 0 I mdss_hw_init: MDP Rev=10020000
- 02-01 21:12:16.171 0 0 I dsi_panel_device_register: Panel data initialized
- 02-01 21:12:16.171 0 0 I mdss_dsi_ctrl_probe: Dsi Ctrl->0 initialized
- 02-01 21:12:16.171 0 0 I mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->1
- 02-01 21:12:16.171 0 0 I mdss_dsi_get_panel_cfg: 626: cfg:[]
- 02-01 21:12:16.171 0 0 W mdss_dsi_ctrl_probe: 1754:dsi specific cfg not present
- 02-01 21:12:16.171 0 0 E mdss_dsi_pref_prim_panel: can't find panel phandle
- 02-01 21:12:16.171 0 0 E mdss_dsi_ctrl_probe: can't find panel node
- 02-01 21:12:16.171 0 0 I : mdss_dsi_driver_init --
- 02-01 21:12:16.171 0 0 I mdss_dsi_status_init: DSI status check interval:5000
- 02-01 21:12:16.171 0 0 I hdmi_tx_get_dt_data: drm_orkaround = true
- 02-01 21:12:16.171 0 0 I hdmi_tx_init_resource: 'core_physical': start = 0xc6ff8100, len=0x370
- 02-01 21:12:16.171 0 0 I hdmi_tx_init_resource: 'phy_physical': start = 0xc6ffa500, len=0x7c
- 02-01 21:12:16.171 0 0 I hdmi_tx_init_resource: 'qfprom_physical': start = 0xc7018000, len=0x60f0
- 02-01 21:12:16.172 0 0 I mdss_register_panel: adding framebuffer device fd922100.qcom,hdmi_tx
- 02-01 21:12:16.172 0 0 I mdss_register_panel: adding framebuffer device qcom,mdss_wb_panel.7
- 02-01 21:12:16.173 0 0 I mdss_fb_alloc_fbmem_iommu: boot_mode_lpm = 0, boot_mode_recovery = 0
- 02-01 21:12:16.173 0 0 I mdss_fb_register: FrameBuffer[0] 1080x1920 registered successfully!
- 02-01 21:12:16.173 0 0 E samsung_dsi_panel_event_handler: unknown event
- 02-01 21:12:16.173 0 0 D : Registered led device: lcd-backlight
- 02-01 21:12:16.173 0 0 I : [mdss_dsi_panel_registered] CONFIG_MDNIE_LITE_TUNING ok ! init class called!
- 02-01 21:12:16.173 0 0 I mdss_dsi_panel_registered: 2715, Panel registered succesfully
- 02-01 21:12:16.173 0 0 I mdp4_reg_csc_fs: mdp4_reg_csc_fs: kobject_uevent(KOBJ_ADD)
- 02-01 21:12:16.173 0 0 I mdss_fb_alloc_fbmem_iommu: boot_mode_lpm = 0, boot_mode_recovery = 0
- 02-01 21:12:16.173 0 0 I mdss_fb_register: FrameBuffer[1] 640x480 registered successfully!
- 02-01 21:12:16.173 0 0 I mdp4_reg_csc_fs: mdp4_reg_csc_fs: kobject_uevent(KOBJ_ADD)
- 02-01 21:12:16.173 0 0 I mdss_fb_alloc_fbmem_iommu: boot_mode_lpm = 0, boot_mode_recovery = 0
- 02-01 21:12:16.173 0 0 I mdss_fb_register: FrameBuffer[2] 1920x1080 registered successfully!
- 02-01 21:12:16.173 0 0 I mdp4_reg_csc_fs: mdp4_reg_csc_fs: kobject_uevent(KOBJ_ADD)
- 02-01 21:12:16.173 0 0 I sii8240_init sii8240: check mhl
- 02-01 21:12:16.173 0 0 I gpio : mhl_irq = 31
- 02-01 21:12:16.173 0 0 I gpio : mhl_reset = 405
- 02-01 21:12:16.173 0 0 I : of_sii8240_parse_dt() gpio_mhl_reset_type = 3
- 02-01 21:12:16.173 0 0 I gpio : mhl_scl = 52
- 02-01 21:12:16.173 0 0 I gpio : mhl_sda = 51
- 02-01 21:12:16.173 0 0 I gpio : mhl_en = 404
- 02-01 21:12:16.173 0 0 I : of_sii8240_parse_dt() gpio_mhl_en_type = 3
- 02-01 21:12:16.173 0 0 I : swing_level = 0x25
- 02-01 21:12:16.173 0 0 I : barcode_emul = false
- 02-01 21:12:16.173 0 0 I : drm_workaround = true
- 02-01 21:12:16.173 0 0 E : sii8240,vcc_1p2v is not exist in device tree
- 02-01 21:12:16.173 0 0 E : sii8240,vcc_1p8v is not exist in device tree
- 02-01 21:12:16.173 0 0 E : sii8240,vcc_3p3v is not exist in device tree
- 02-01 21:12:16.174 0 0 I of_sii8240_parse_dt: hdmi_pdev [0Xead33200] to pdata->pdev
- 02-01 21:12:16.174 0 0 I sii8240_mhlv2dt 9-0039: success client_addr 0x39
- 02-01 21:12:16.174 0 0 I sii8240_mhlv2dt 9-0039: sii8240 irq : 329
- 02-01 21:12:16.174 0 0 I sii8240_mhlv2dt 9-0039: sii8240: registering input device
- 02-01 21:12:16.174 0 0 I input : sii8240_rcp as /devices/virtual/input/input0
- 02-01 21:12:16.174 0 0 I sii8240_mhlv2dt 9-0049: success client_addr 0x49
- 02-01 21:12:16.174 0 0 I sii8240_mhlv2dt 9-004d: success client_addr 0x4D
- 02-01 21:12:16.174 0 0 I sii8240_mhlv2dt 9-0059: success client_addr 0x59
- 02-01 21:12:16.174 0 0 I sii8240_mhlv2dt 9-0064: success client_addr 0x64
- 02-01 21:12:16.188 0 0 E sps : BAM device 0xf9944000 is not registered yet.
- 02-01 21:12:16.190 0 0 I sps : BAM 0xf9944000 is registered.
- 02-01 21:12:16.190 0 0 I f995e000.uart: ttyHS0 at MMIO 0xf995e000 (irq = 146) is a MSM HS UART
- 02-01 21:12:16.192 0 0 I msm_serial_hsl_probe: detected port #0 (ttyHSL0)
- 02-01 21:12:16.193 0 0 I f991e000.serial: ttyHSL0 at MMIO 0xf991e000 (irq = 140) is a MSM
- 02-01 21:12:16.196 0 0 I msm_serial_hsl_probe: detected port #1 (ttyHSL1)
- 02-01 21:12:16.196 0 0 E msm_serial_hsl_probe: Error getting clk
- 02-01 21:12:16.196 0 0 W msm_serial_hsl: probe of f9922000.serial failed with error -2
- 02-01 21:12:16.196 0 0 I msm_serial_hsl_init: driver initialized
- 02-01 21:12:16.222 0 0 I : diagchar initialized now
- 02-01 21:12:16.222 0 0 E kgsl : adreno_of_read_property: Unable to read 'qcom,pm-qos-latency'
- 02-01 21:12:16.223 0 0 W : kgsl bus ib [0] = 2400000000
- 02-01 21:12:16.223 0 0 W : kgsl bus ib [1] = 4656000000
- 02-01 21:12:16.223 0 0 W : kgsl bus ib [2] = 7464000000
- 02-01 21:12:16.223 0 0 W : kgsl bus index is 2 for pwrlevel 0
- 02-01 21:12:16.223 0 0 W : kgsl bus index is 1 for pwrlevel 1
- 02-01 21:12:16.223 0 0 W : kgsl bus index is 1 for pwrlevel 2
- 02-01 21:12:16.223 0 0 W : kgsl bus index is 0 for pwrlevel 3
- 02-01 21:12:16.224 0 0 I kgsl kgsl-3d0: |kgsl_iommu_init| MMU type set for device is IOMMU
- 02-01 21:12:16.225 0 0 I : GPU_SYSFS ----------- gpu_sysfs_init -- 224
- 02-01 21:12:16.225 0 0 I : GPU_SYSFS ----------- gpu_sysfs_probe -- 158
- 02-01 21:12:16.225 0 0 I : GPU_SYSFS ----------- gpu_sysfs_device_init -- 144
- 02-01 21:12:16.225 0 0 I : GPU_SYSFS ----------- gpu_sysfs_create_sysfs_files -- 29
- 02-01 21:12:16.225 0 0 I : GPU_SYSFS ----------- gpu_sysfs_create_sysfs_files -- 115
- 02-01 21:12:16.225 0 0 I : GPU_SYSFS ----------- gpu_sysfs_probe -- 178
- 02-01 21:12:16.225 0 0 I : GPU_SYSFS ----------- gpu_sysfs_init -- 250
- 02-01 21:12:16.225 0 0 I barcode_emul_ice4_hlte: barcode_emul_probe probe!
- 02-01 21:12:16.225 0 0 I barcode_emul_ice4_hlte: 12 system_rev!
- 02-01 21:12:16.225 0 0 I barcode_emul_ice4_hlte: barcode_emul_probe setting gpio config.
- 02-01 21:12:16.225 0 0 I barcode_emul_ice4_hlte: barcode_gpio_config
- 02-01 21:12:16.226 0 0 E barcode_emul_ice4_hlte: probe complete barcode_emul_probe
- 02-01 21:12:16.228 0 0 I brd : module loaded
- 02-01 21:12:16.229 0 0 I loop : module loaded
- 02-01 21:12:16.230 0 0 W QSEECOM : qseecom_probe: support_bus_scaling=0x1
- 02-01 21:12:16.230 0 0 W QSEECOM : qseecom_probe: disk-encrypt-pipe-pair=0x2
- 02-01 21:12:16.230 0 0 W QSEECOM : qseecom_probe: file-encrypt-pipe-pair=0x0
- 02-01 21:12:16.230 0 0 W QSEECOM : qseecom_probe: hlos-ce-hw-instance=0x1
- 02-01 21:12:16.230 0 0 W QSEECOM : qseecom_probe: qsee-ce-hw-instance=0x0
- 02-01 21:12:16.230 0 0 I QSEECOM : qseecom_probe: qseecom.appsbl_qseecom_support = 0x0
- 02-01 21:12:16.230 0 0 W QSEECOM : qseecom_probe: secure app region addr=0x7500000 size=0xb00000
- 02-01 21:12:16.230 0 0 I : init tzic
- 02-01 21:12:16.230 0 0 I func : max77803_muic_init
- 02-01 21:12:16.230 0 0 I func : max77803_muic_probe
- 02-01 21:12:16.230 0 0 I max77803-muic: adc:367 chgtype:371, adc1k370
- 02-01 21:12:16.230 0 0 I max77803-muic: input->name:max77803-muic
- 02-01 21:12:16.230 0 0 I input : max77803-muic as /devices/i2c.86/i2c-13/13-0066/max77803-muic/input/input1
- 02-01 21:12:16.231 0 0 I max77803_muic_init_cb: MUIC ret=0
- 02-01 21:12:16.231 0 0 I max77803-muic: func:max77803_muic_set_adcdbset value:2
- 02-01 21:12:16.231 0 0 I max77803-muic: max77803_muic_set_adcdbset: ADCDBSET(0x20)
- 02-01 21:12:16.232 0 0 I max77803_muic_probe: CDETCTRL1(0x0d)
- 02-01 21:12:16.232 0 0 I max77803-muic: func:max77803_muic_irq_init
- 02-01 21:12:16.234 0 0 I max77803-muic: adc:367 chgtype:371 adc1k:370 vbvolt:375
- 02-01 21:12:16.234 0 0 I max77803-muic: max77803_muic_irq_init: reg=7, val=9
- 02-01 21:12:16.234 0 0 I max77803-muic: max77803_muic_irq_init: reg=8, val=11
- 02-01 21:12:16.235 0 0 I max77803-muic: max77803_muic_irq_init: reg=9, val=0
- 02-01 21:12:16.235 0 0 I max77803-muic: max77803_muic_irq_init: reg=1, val=0
- 02-01 21:12:16.235 0 0 I max77803-muic: max77803_muic_irq_init: reg=2, val=0
- 02-01 21:12:16.236 0 0 I max77803-muic: max77803_muic_irq_init: reg=3, val=0
- 02-01 21:12:16.236 0 0 I max77803_set_jig_state: 0
- 02-01 21:12:16.236 0 0 I max77803-muic: max77803_muic_uart_uevent: state:0
- 02-01 21:12:16.236 0 0 I : khhan Entering dualwave_init 454
- 02-01 21:12:16.236 0 0 W i2c-core: driver [tabla-i2c-core] using legacy suspend method
- 02-01 21:12:16.236 0 0 W i2c-core: driver [tabla-i2c-core] using legacy resume method
- 02-01 21:12:16.236 0 0 W i2c-core: driver [wcd9xxx-i2c-core] using legacy suspend method
- 02-01 21:12:16.236 0 0 W i2c-core: driver [wcd9xxx-i2c-core] using legacy resume method
- 02-01 21:12:16.236 0 0 I : SCSI Media Changer driver v0.25
- 02-01 21:12:16.237 0 0 W spi_qsd f9923000.spi: msm_spi_dt_to_pdata pdata->use_bam: 1
- 02-01 21:12:16.237 0 0 E sps : BAM device 0xf9904000 is not registered yet.
- 02-01 21:12:16.239 0 0 I sps : BAM 0xf9904000 is registered.
- 02-01 21:12:16.239 0 0 I barcode_emul_ice4_hlte: barcode_gpio_reconfig
- 02-01 21:12:16.244 0 0 I barcode_emul_ice4_hlte: barcode_fpga_fimrware_update_start
- 02-01 21:12:16.244 0 0 I sps : BAM 0xf9904000 (va:0xc70e0000) enabled: ver:0x13, number of pipes:24
- 02-01 21:12:16.247 0 0 W spi_qsd f9925000.spi: msm_spi_dt_to_pdata pdata->use_bam: 1
- 02-01 21:12:16.247 0 0 W spi_qsd f9925000.spi: using default bus_num -1
- 02-01 21:12:16.247 0 0 E spi_qsd f9925000.spi: msm_spi_probe: unable to get core_clk
- 02-01 21:12:16.247 0 0 W spi_qsd : probe of f9925000.spi failed with error -2
- 02-01 21:12:16.253 0 0 W spi_qsd f9967000.spi: msm_spi_dt_to_pdata pdata->use_bam: 0
- 02-01 21:12:16.253 0 0 I tun : Universal TUN/TAP device driver, 1.6
- 02-01 21:12:16.253 0 0 I tun : (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- 02-01 21:12:16.253 0 0 I rmnet_init: BAM devices[9]
- 02-01 21:12:16.256 0 0 I : PPP generic driver version 2.4.2
- 02-01 21:12:16.256 0 0 I : PPP BSD Compression module registered
- 02-01 21:12:16.256 0 0 I : PPP Deflate Compression module registered
- 02-01 21:12:16.256 0 0 I FIPS : self-tests for non-FIPS ecb(arc4-generic) (ecb(arc4)) passed
- 02-01 21:12:16.256 0 0 I : PPP MPPE Compression module registered
- 02-01 21:12:16.256 0 0 I NET : Registered protocol family 24
- 02-01 21:12:16.256 0 0 I SLIP : version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
- 02-01 21:12:16.256 0 0 I CSLIP : code copyright 1989 Regents of the University of California.
- 02-01 21:12:16.256 0 0 D : function asix_init line 3883
- 02-01 21:12:16.256 0 0 I usbcore : registered new interface driver asix
- 02-01 21:12:16.256 0 0 I usbcore : registered new interface driver cdc_ether
- 02-01 21:12:16.256 0 0 I usbcore : registered new interface driver net1080
- 02-01 21:12:16.256 0 0 I usbcore : registered new interface driver cdc_subset
- 02-01 21:12:16.256 0 0 I usbcore : registered new interface driver zaurus
- 02-01 21:12:16.256 0 0 I usbcore : registered new interface driver cdc_ncm
- 02-01 21:12:16.279 0 0 I max77803-muic: max77803_muic_dock_detect CONTROL1:9
- 02-01 21:12:16.280 0 0 I max77803-muic: max77803_muic_dock_detect STATUS1:0x3f, 2:0x41
- 02-01 21:12:16.280 0 0 I max77803-muic: max77803_muic_dock_detect adc:1f adcerr:0 chgtyp:1 vb:40 dxovp:0 cable_type:20
- 02-01 21:12:16.515 0 0 I dwc3-msm: sec_otg_init is called.
- 02-01 21:12:16.515 0 0 I sec_otg_init: register notifier
- 02-01 21:12:16.515 0 0 E : get_vbus_detect_gpio, cannot get vbus-detect-gpio, ret=-22
- 02-01 21:12:16.515 0 0 I usbcore : registered new interface driver cdc_acm
- 02-01 21:12:16.515 0 0 I cdc_acm : USB Abstract Control Model driver for USB modems and ISDN adapters
- 02-01 21:12:16.515 0 0 I : Initializing USB Mass Storage driver...
- 02-01 21:12:16.515 0 0 I usbcore : registered new interface driver usb-storage
- 02-01 21:12:16.515 0 0 I : USB Mass Storage support registered.
- 02-01 21:12:16.515 0 0 I usbcore : registered new interface driver ums-alauda
- 02-01 21:12:16.515 0 0 I usbcore : registered new interface driver ums-cypress
- 02-01 21:12:16.515 0 0 I usbcore : registered new interface driver ums-datafab
- 02-01 21:12:16.516 0 0 I usbcore : registered new interface driver ums-freecom
- 02-01 21:12:16.516 0 0 I usbcore : registered new interface driver ums-isd200
- 02-01 21:12:16.516 0 0 I usbcore : registered new interface driver ums-jumpshot
- 02-01 21:12:16.516 0 0 I usbcore : registered new interface driver ums-karma
- 02-01 21:12:16.516 0 0 I usbcore : registered new interface driver ums-onetouch
- 02-01 21:12:16.516 0 0 I usbcore : registered new interface driver ums-sddr09
- 02-01 21:12:16.516 0 0 I usbcore : registered new interface driver ums-sddr55
- 02-01 21:12:16.516 0 0 I usbcore : registered new interface driver ums-usbat
- 02-01 21:12:16.516 0 0 I usbcore : registered new interface driver usbserial
- 02-01 21:12:16.516 0 0 I usbserial: USB Serial Driver core
- 02-01 21:12:16.516 0 0 I usbcore : registered new interface driver pl2303
- 02-01 21:12:16.516 0 0 I : USB Serial support registered for pl2303
- 02-01 21:12:16.516 0 0 I host_notifier host-notifier.44: notifier_probe
- 02-01 21:12:16.516 0 0 D usb : android_bind disconnect
- 02-01 21:12:16.516 0 0 I mbim_init: initialize 1 instances
- 02-01 21:12:16.516 0 0 I mbim_init: Initialized 1 ports
- 02-01 21:12:16.517 0 0 I rndis_qc_init: initialize rndis QC instance
- 02-01 21:12:16.517 0 0 I gadget : Mass Storage Function, version: 2009/09/11
- 02-01 21:12:16.517 0 0 I gadget : Number of LUNs=1
- 02-01 21:12:16.517 0 0 I lun0 : LUN: removable CD-ROM file: (no medium)
- 02-01 21:12:16.518 0 0 D usb : composite_bind idVendor=0x0, idProduct=0x0
- 02-01 21:12:16.518 0 0 D usb : composite_bind bcdDevice=0x0
- 02-01 21:12:16.518 0 0 D usb : composite_bind composite_manufacturer=
- 02-01 21:12:16.518 0 0 I gadget : android_usb ready
- 02-01 21:12:16.518 0 0 I mousedev: PS/2 mouse device common for all mice
- 02-01 21:12:16.518 0 0 E : cypress_touchkey_init
- 02-01 21:12:16.518 0 0 E cypress_parse_dt: SCL:96, SDA:95, INT:436, ID:-22, VDD_GPIO:-22 ,VCC_EN:-22, FW_UPDATE:0
- 02-01 21:12:16.518 0 0 I cypress_touchkey 21-0020: cypress_power_onoff: power on
- 02-01 21:12:16.528 0 0 I barcode_emul_ice4_hlte: FPGA firmware update success
- 02-01 21:12:16.679 0 0 I cypress_touchkey 21-0020: touchkey id = CYPRESS
- 02-01 21:12:16.680 0 0 I cypress_touchkey 21-0020: tkey_i2c_check: ic_fw_ver = 9, module_ver = 7
- 02-01 21:12:16.720 0 0 I cypress_touchkey 21-0020: cypress_touchkey_interrupt_set_dual: interrupt set: 0x1
- 02-01 21:12:16.720 0 0 I input : sec_touchkey as /devices/i2c.91/i2c-21/21-0020/input/input2
- 02-01 21:12:16.720 0 0 I cypress_touchkey 21-0020: gpio_to_irq IRQ 623
- 02-01 21:12:16.720 0 0 I : tkey/hltejs01_cypress_tkey.fw!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
- 02-01 21:12:16.720 0 0 I cypress_touchkey 21-0020: the fw 0x9 is loaded (size=8192)
- 02-01 21:12:16.720 0 0 I cypress_touchkey 21-0020: tkey_flash_fw : IC aleady have latest firmware (fw:0x9 module:0x7)
- 02-01 21:12:16.722 0 0 I cypress_touchkey 21-0020: cypress_touchkey_auto_cal: data[0]=50 data[1]=9 data[2]=7 data[3]=1
- 02-01 21:12:16.830 0 0 I cypress_touchkey 21-0020: cypress_touchkey_probe: done
- 02-01 21:12:16.830 0 0 E cypress_touchkey_init: init done 0
- 02-01 21:12:16.830 0 0 I usbcore : registered new interface driver xpad
- 02-01 21:12:16.830 0 0 E : TSP synaptics_rmi4_probe
- 02-01 21:12:16.830 0 0 E : synaptics_parse_dt tsppwr_1p8_en= 416, tsp_int= 437
- 02-01 21:12:16.830 0 0 I : [TSP] synaptics_request_gpio
- 02-01 21:12:16.830 0 0 E : synaptics_rmi4_probe system_rev = 12, octa version =0x408047
- 02-01 21:12:16.830 0 0 W 8941_l10: Failed to create debugfs directory
- 02-01 21:12:16.831 0 0 I synaptics_power_ctrl: tsp 1.8V on is finished.
- 02-01 21:12:16.831 0 0 E : [synaptics] synaptics_power_ctrl enable(1)
- 02-01 21:12:16.959 0 0 E synaptics_power_ctrl: L10(1.8V) is enabled
- 02-01 21:12:16.959 0 0 I synaptics_power_ctrl: tsp 1.8V on is finished.
- 02-01 21:12:16.959 0 0 E : [synaptics] synaptics_power_ctrl enable(1)
- 02-01 21:12:17.160 0 0 I synaptics_rmi4_i2c 2-0020: synaptics_rmi4_f34_read_version: [IC] [date, revision, version, panel] [10/18, 0xB0, 0x6F, 0x08]
- 02-01 21:12:17.160 0 0 I synaptics_rmi4_i2c 2-0020: synaptics_rmi4_check_status: Device status[0x81] status.code[1]
- 02-01 21:12:17.162 0 0 I synaptics_rmi4_i2c 2-0020: synaptics_rmi4_f12_init: 12 num_Rx:28 num_Tx:16, node:192, threshold:30, gloved sensitivity:f9
- 02-01 21:12:17.162 0 0 I synaptics_rmi4_i2c 2-0020: synaptics_rmi4_glove_mode_enables: [00]: glove disable
- 02-01 21:12:17.165 0 0 I synaptics_rmi4_i2c 2-0020: synaptics_rmi4_f51_set_init: proximity controls:[0X51]
- 02-01 21:12:17.165 0 0 I synaptics_rmi4_i2c 2-0020: synaptics_rmi4_f51_set_custom_rezero
- 02-01 21:12:17.269 0 0 I synaptics_rmi4_i2c 2-0020: synaptics_rmi4_f51_set_enables: disable[0x82]
- 02-01 21:12:17.271 0 0 I synaptics_rmi4_i2c 2-0020: synaptics_rmi4_query_device: Number of interrupt registers = 1 sum of intr_count = 6
- 02-01 21:12:17.272 0 0 I synaptics_rmi4_i2c 2-0020: synaptics_rmi4_query_device: F34 : NUM_SOURCE[21] NUM_INT_REG[00] INT_MASK[00]
- 02-01 21:12:17.272 0 0 I synaptics_rmi4_i2c 2-0020: synaptics_rmi4_query_device: F12 : NUM_SOURCE[01] NUM_INT_REG[00] INT_MASK[04]
- 02-01 21:12:17.272 0 0 I synaptics_rmi4_i2c 2-0020: synaptics_rmi4_query_device: F51 : NUM_SOURCE[41] NUM_INT_REG[00] INT_MASK[20]
- 02-01 21:12:17.272 0 0 I synaptics_rmi4_i2c 2-0020: synaptics_rmi4_query_device: Interrupt enable mask 0 = 0x24
- 02-01 21:12:17.272 0 0 I input : sec_touchscreen as /devices/f9924000.i2c/i2c-2/2-0020/input/input3
- 02-01 21:12:17.272 0 0 I synaptics_rmi4_i2c 2-0020: synaptics_rmi4_input_open
- 02-01 21:12:17.272 0 0 E synaptics_rmi4_i2c 2-0020: synaptics_rmi4_start_device already power on
- 02-01 21:12:17.272 0 0 D gpio_export: gpio0 status -22
- 02-01 21:12:17.272 0 0 E synaptics_rmi4_i2c 2-0020: rmidev_init_device: Failed to export attention gpio
- 02-01 21:12:17.274 0 0 I synaptics_rmi4_i2c 2-0020: synaptics_rmi4_f54_set_control: query_base_addr[0x132] control_base_addr[0x10c] data_base_addr[0x100] command_base_addr[0x131]
- 02-01 21:12:17.276 0 0 I synaptics_rmi4_i2c 2-0020: synaptics_rmi4_fwu_init: [IC] [F01 product info, ID(revision)] [0x0000 0x0000, SY 01(0XB0)]
- 02-01 21:12:17.276 0 0 E synaptics_rmi4_probe: tsp : gpio_to_irq : 624
- 02-01 21:12:17.276 0 0 E synaptics_rmi4_probe: ln:4033
- 02-01 21:12:17.277 0 0 I synaptics_rmi4_i2c 2-0020: synaptics_rmi4_fw_update_on_probe: Load firmware : tsp_synaptics/synaptics_js_b0_5_1.fw
- 02-01 21:12:17.277 0 0 I synaptics_rmi4_i2c 2-0020: synaptics_skip_firmware_update: [FW size. revision, version] [62976, 0xB0/0xB0(BIN/IC), 0x6F/0x6F(BIN/IC)]
- 02-01 21:12:17.277 0 0 I synaptics_rmi4_i2c 2-0020: synaptics_skip_firmware_update: [Panel revision, prog bit] [0x08, 0x00]
- 02-01 21:12:17.277 0 0 I synaptics_rmi4_i2c 2-0020: synaptics_skip_firmware_update: Do not need to update
- 02-01 21:12:17.278 0 0 I : using rtc device, qpnp_rtc, for alarms
- 02-01 21:12:17.278 0 0 I qcom,qpnp-rtc qpnp-rtc-35: rtc core: registered qpnp_rtc as rtc0
- 02-01 21:12:17.278 0 0 E qcom,qpnp-rtc qpnp-rtc-35: Probe success !!
- 02-01 21:12:17.278 0 0 I : i2c /dev entries driver
- 02-01 21:12:17.279 0 0 D msm_vidc: 1: Failed to read qcom,load-freq-tbl from device tree
- 02-01 21:12:17.279 0 0 D msm_vidc: 1: no elements in frequency table
- 02-01 21:12:17.279 0 0 D msm_vidc: 1: Failed to read qcom,reg-presets from device tree
- 02-01 21:12:17.279 0 0 D msm_vidc: 1: Failed to read qcom,buffer-type-tz-usage-table from device tree
- 02-01 21:12:17.279 0 0 D msm_vidc: 1: Q6 hfi device probe called
- 02-01 21:12:17.279 0 0 D msm_vidc: 1: debugfs_create_file: fail
- 02-01 21:12:17.280 0 0 W msm_probe: Succeed!
- 02-01 21:12:17.280 0 0 E cam_dummy_init_module: 182
- 02-01 21:12:17.280 0 0 E cam_dummy_platform_probe: 87
- 02-01 21:12:17.285 0 0 W msm_cci_probe: Succeed!
- 02-01 21:12:17.285 0 0 E msm_camera_request_gpio_table: 549 invalid gpio_tbl (null) / size 0
- 02-01 21:12:17.285 0 0 I : msm_camera_config_single_vreg enable cam_vio
- 02-01 21:12:17.288 0 0 I msm_eeprom_match_id: read 0xf8 0x14, check 0xf8 0x14
- 02-01 21:12:17.289 0 0 I msm_eeprom_verify_sum: checksum pass 0x94a7353f
- 02-01 21:12:17.289 0 0 I msm_eeprom_verify_sum: checksum pass 0xbd783842
- 02-01 21:12:17.289 0 0 I msm_eeprom_verify_sum: checksum pass 0x6826997e
- 02-01 21:12:17.289 0 0 I msm_eeprom_verify_sum: checksum pass 0x765872d5
- 02-01 21:12:17.289 0 0 I : msm_camera_config_single_vreg disable cam_vio
- 02-01 21:12:17.291 0 0 E msm_camera_request_gpio_table: 549 invalid gpio_tbl (null) / size 0
- 02-01 21:12:17.291 0 0 W : msm_eeprom_spi_setup success result=0 supported=1f X
- 02-01 21:12:17.291 0 0 W MSM-SENSOR-DRIVER msm_sensor_driver_init: 627 msm_sensor_driver_init : Enter
- 02-01 21:12:17.292 0 0 W MSM-SENSOR-DRIVER msm_sensor_driver_parse: 604 g_sctrl[0] ea278700
- 02-01 21:12:17.293 0 0 W MSM-SENSOR-DRIVER msm_sensor_driver_parse: 604 g_sctrl[2] ea278800
- 02-01 21:12:17.293 0 0 W MSM-SENSOR-DRIVER msm_sensor_driver_init: 631 probe success
- 02-01 21:12:17.294 0 0 E __msm_jpeg_init: 895] Jpeg Device id 0
- 02-01 21:12:17.294 0 0 E __msm_jpeg_init: 895] Jpeg Device id 1
- 02-01 21:12:17.309 0 0 E __msm_jpeg_init: 895] Jpeg Device id 2
- 02-01 21:12:17.309 1 1 E QCTKD : camss_top_ahb_clk[1:1] Enable
- 02-01 21:12:17.309 1 1 E QCTKD : vfe_clk_src[1:1] Enable
- 02-01 21:12:17.309 1 1 E QCTKD : camss_vfe_vfe_clk[1:1] Enable
- 02-01 21:12:17.309 1 1 E QCTKD : iface_clk[1:1] Enable
- 02-01 21:12:17.309 1 1 E QCTKD : cpp_core_clk[1:1] Enable
- 02-01 21:12:17.309 1 1 E QCTKD : cpp_iface_clk[1:1] Enable
- 02-01 21:12:17.309 1 1 E QCTKD : cpp_bus_clk[1:1] Enable
- 02-01 21:12:17.309 1 1 E QCTKD : micro_iface_clk[1:1] Enable
- 02-01 21:12:17.309 0 0 E MSM-CPP cpp_init_hardware: 812 stream_cnt:0
- 02-01 21:12:17.309 0 0 E MSM-CPP cpp_init_hardware: 835 cpp_dbg: end of cpp_init_hardware
- 02-01 21:12:17.309 0 0 E QCTKD : micro_iface_clk[0:0] Disable
- 02-01 21:12:17.309 0 0 E QCTKD : cpp_bus_clk[0:0] Disable
- 02-01 21:12:17.309 0 0 E QCTKD : cpp_iface_clk[0:0] Disable
- 02-01 21:12:17.309 0 0 E QCTKD : cpp_core_clk[0:0] Disable
- 02-01 21:12:17.309 0 0 E QCTKD : iface_clk[0:0] Disable
- 02-01 21:12:17.309 0 0 E QCTKD : camss_vfe_vfe_clk[0:0] Disable
- 02-01 21:12:17.309 0 0 E QCTKD : vfe_clk_src[0:0] Disable
- 02-01 21:12:17.309 0 0 E QCTKD : camss_top_ahb_clk[0:0] Disable
- 02-01 21:12:17.310 0 0 I lirc_dev: IR Remote Control driver registered, major 231
- 02-01 21:12:17.310 0 0 I : IR NEC protocol handler initialized
- 02-01 21:12:17.310 0 0 I : IR RC5(x) protocol handler initialized
- 02-01 21:12:17.310 0 0 I : IR RC6 protocol handler initialized
- 02-01 21:12:17.310 0 0 I : IR JVC protocol handler initialized
- 02-01 21:12:17.310 0 0 I : IR Sony protocol handler initialized
- 02-01 21:12:17.310 0 0 I : IR RC5 (streamzap) protocol handler initialized
- 02-01 21:12:17.310 0 0 I : IR SANYO protocol handler initialized
- 02-01 21:12:17.310 0 0 I : IR MCE Keyboard/mouse protocol handler initialized
- 02-01 21:12:17.310 0 0 I : IR LIRC bridge handler initialized
- 02-01 21:12:17.310 0 0 I gspca_main: v2.14.0 registered
- 02-01 21:12:17.310 0 0 I usbcore : registered new interface driver uvcvideo
- 02-01 21:12:17.310 0 0 I : USB Video Class driver (1.1.1)
- 02-01 21:12:17.360 0 0 I device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
- 02-01 21:12:17.360 0 0 I Bluetooth: BlueSleep Mode Driver Ver 1.1
- 02-01 21:12:17.360 0 0 E : bluesleep probe
- 02-01 21:12:17.360 0 0 E : configure input direction
- 02-01 21:12:17.361 0 0 I cpuidle : using governor ladder
- 02-01 21:12:17.361 0 0 I cpuidle : using governor menu
- 02-01 21:12:17.361 0 0 I sdhci : Secure Digital Host Controller Interface driver
- 02-01 21:12:17.361 0 0 I sdhci : Copyright(c) Pierre Ossman
- 02-01 21:12:17.361 0 0 I msmsdcc_populate_pdata: before parsing vendor_type
- 02-01 21:12:17.361 0 0 I msmsdcc_populate_pdata: vendor_type=4
- 02-01 21:12:17.361 0 0 I mmc0 : SDCC Version: 0x00000038
- 02-01 21:12:17.364 0 0 I mmc0 : bam physical base=0xf9884000
- 02-01 21:12:17.364 0 0 I mmc0 : bam virtual base=0xc7068000
- 02-01 21:12:17.364 0 0 I sps : BAM 0xf9884000 is registered.
- 02-01 21:12:17.364 0 0 I mmc0 : BAM device registered. bam_handle=0xe9c2d600
- 02-01 21:12:17.364 0 0 I sps : BAM 0xf9884000 (va:0xc7068000) enabled: ver:0x6, number of pipes:6
- 02-01 21:12:17.364 0 0 I mmc0 : Qualcomm MSM SDCC-BAM at [mem 0xf9884000-0xf988afff flags 0x200] [irq 252 flags 0x400]
- 02-01 21:12:17.364 0 0 I mmc0 : Qualcomm MSM SDCC-DML [mem 0xf98a4800-0xf98a48ff flags 0x200]
- 02-01 21:12:17.364 0 0 W : Enter brcm_wifi_status
- 02-01 21:12:17.364 0 0 W brcm_wifi_status: 477 status 0
- 02-01 21:12:17.364 0 0 W : Enter brcm_wifi_status_register
- 02-01 21:12:17.365 0 0 I brcm_wifi_status_register: callback is c0826834, devid is eae65440
- 02-01 21:12:17.368 0 0 I mmc0 : Qualcomm MSM SDCC-core [mem 0xf98a4000-0xf98a47ff flags 0x200] [irq 157 flags 0x400],0 dma -1 dmacrcri -1
- 02-01 21:12:17.368 0 0 I mmc0 : Controller capabilities: 0x00007ffe
- 02-01 21:12:17.368 0 0 I mmc0 : 8 bit data mode disabled
- 02-01 21:12:17.368 0 0 I mmc0 : 4 bit data mode enabled
- 02-01 21:12:17.368 0 0 I mmc0 : polling status mode disabled
- 02-01 21:12:17.368 0 0 I mmc0 : MMC clock 400000 -> 200000000 Hz, PCLK 0 Hz
- 02-01 21:12:17.368 0 0 I mmc0 : Slot eject status = 1
- 02-01 21:12:17.368 0 0 I mmc0 : Power save feature enable = 1
- 02-01 21:12:17.368 0 0 I mmc0 : SPS-BAM data transfer mode available
- 02-01 21:12:17.368 0 0 I sdhci-pltfm: SDHCI platform and OF driver helper
- 02-01 21:12:17.368 0 0 E sdhci_msm_populate_pdata: before parsing vendor_type
- 02-01 21:12:17.371 0 0 E sdhci_msm_vreg_enable: vdd-io Cannot find Regulator
- 02-01 21:12:17.371 0 0 E sdhci_msm_vreg_disable: vdd-io Cannot find Regulator
- 02-01 21:12:17.371 0 0 E mmc1 : id 1
- 02-01 21:12:17.372 0 0 I mmc1 : no vmmc regulator found
- 02-01 21:12:17.373 0 0 D : Registered led device: mmc1::
- 02-01 21:12:17.374 0 0 I mmc1 : SDHCI controller on msm_sdcc.1 [msm_sdcc.1] using ADMA
- 02-01 21:12:17.375 0 0 E sdhci_msm_populate_pdata: before parsing vendor_type
- 02-01 21:12:17.379 0 0 E mmc2 : id 3
- 02-01 21:12:17.379 0 0 D sdhci_msm_probe: Change sysfs Card Detect
- 02-01 21:12:17.380 0 0 I mmc2 : no vmmc regulator found
- 02-01 21:12:17.381 0 0 D : Registered led device: mmc2::
- 02-01 21:12:17.382 0 0 I mmc2 : SDHCI controller on msm_sdcc.3 [msm_sdcc.3] using ADMA
- 02-01 21:12:17.382 0 0 D : Registered led device: led:rgb_red
- 02-01 21:12:17.383 0 0 D : Registered led device: led:rgb_green
- 02-01 21:12:17.383 0 0 D : Registered led device: led:rgb_blue
- 02-01 21:12:17.383 0 0 D : Registered led device: led:flash_0
- 02-01 21:12:17.383 0 0 D : Registered led device: led:flash_1
- 02-01 21:12:17.383 0 0 D : Registered led device: led:flash_torch
- 02-01 21:12:17.384 0 0 D : Registered led device: wled:backlight
- 02-01 21:12:17.384 0 0 D : Registered led device: leds-sec1
- 02-01 21:12:17.387 0 0 D : Registered led device: torch-sec1
- 02-01 21:12:17.391 0 0 I : Successfully registered hid_synaptics_driver
- 02-01 21:12:17.391 0 0 I usbcore : registered new interface driver usbhid
- 02-01 21:12:17.391 0 0 I usbhid : USB HID core driver
- 02-01 21:12:17.391 0 0 I ashmem : initialized
- 02-01 21:12:17.392 0 0 I sps : BAM 0xf9304000 is registered.
- 02-01 21:12:17.392 0 0 I sps : BAM 0xf9a44000 is registered.
- 02-01 21:12:17.392 0 0 E usb_bam_ipa_create_resources: Failed to create USB_PROD resource
- 02-01 21:12:17.392 0 0 I qcom,qpnp-power-on qpnp-power-on-15: PMIC@SID0 Power-on reason: Triggered from KPD (power key press) and 'warm' boot
- 02-01 21:12:17.392 0 0 I qcom,qpnp-power-on qpnp-power-on-15: PMIC@SID0: Unknown power-off reason
- 02-01 21:12:17.392 0 0 I input : qpnp_pon as /devices/virtual/input/input4
- 02-01 21:12:17.393 0 0 I qpnp_coincell_charger_show_state: enabled=Y, voltage=3000 mV, resistance=2100 ohm
- 02-01 21:12:17.393 0 0 I PMIC@SID4: PM8841 v2.1 options: 0, 0, 2, 2
- 02-01 21:12:17.393 0 0 I PMIC@SID0: PM8941 v3.1 options: 0, 0, 0, 0
- 02-01 21:12:17.394 0 0 I mckernelapi: Mobicore API module initialized!
- 02-01 21:12:17.394 0 0 I MobiCore mcd: MobiCore Driver, Build: Sun Jul 9 05:45:10 2017
- 02-01 21:12:17.394 0 0 I MobiCore mcd: MobiCore mcDrvModuleApi version is 1.1
- 02-01 21:12:17.394 0 0 I sec-fuelgauge 19-0036: sec_fuelgauge_probe: SEC Fuelgauge Driver Loading
- 02-01 21:12:17.394 0 0 I : fuelgauge_parse_dt reading fg_irq = 433
- 02-01 21:12:17.394 0 0 I : fuelgauge_parse_dt reading bat_int_gpio = 407
- 02-01 21:12:17.394 0 0 I fuelgauge_parse_dt: fg_irq: 433, calculation_type: 0x17, fuel_alert_soc: 2,
- 02-01 21:12:17.394 0 0 I board_fuelgauge_init: assign battery data
- 02-01 21:12:17.394 0 0 I board_fuelgauge_init: RCOMP0: 0x75, RCOMP_charging: 0x80, temp_cohot: -700, temp_cocold: -4875, is_using_model_data: 1, type_str: SDI, capacity_max: 970, capacity_max_margin: 50, capacity_min: -7,
- 02-01 21:12:17.395 0 0 I sec-fuelgauge 19-0036: MAX17048 Fuel-Gauge Ver 0x0012
- 02-01 21:12:17.396 0 0 I sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (4328), data(0x0000)
- 02-01 21:12:17.397 0 0 E max17048_get_current: Fail to get psy (sec-charger)
- 02-01 21:12:17.397 0 0 E max17048_get_current_average: Fail to get psy (sec-charger)
- 02-01 21:12:17.397 0 0 E max17048_get_current_average: Fail to get psy (battery)
- 02-01 21:12:17.398 0 0 I sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (4328), data(0x0000)
- 02-01 21:12:17.398 0 0 E sdhci_msm_vreg_enable: vdd-io Cannot find Regulator
- 02-01 21:12:17.399 0 0 I sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (4328), data(0x0000)
- 02-01 21:12:17.399 0 0 I sec-fuelgauge 19-0036: sec_fg_get_scaled_capacity: scaled capacity (44.9)
- 02-01 21:12:17.399 0 0 E sec-fuelgauge 19-0036: sec_fg_get_atomic_capacity: capacity (old 0 : new 44)
- 02-01 21:12:17.399 0 0 E power_supply sec-fuelgauge: driver failed to report `energy_full' property: 4294967274
- 02-01 21:12:17.400 0 0 E max17048_get_current: Fail to get psy (sec-charger)
- 02-01 21:12:17.400 0 0 E max17048_get_current_average: Fail to get psy (sec-charger)
- 02-01 21:12:17.400 0 0 E max17048_get_current_average: Fail to get psy (battery)
- 02-01 21:12:17.401 0 0 I sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (4328), data(0x0000)
- 02-01 21:12:17.402 0 0 I sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (4328), data(0x0000)
- 02-01 21:12:17.402 0 0 I sec-fuelgauge 19-0036: sec_fg_get_scaled_capacity: scaled capacity (44.9)
- 02-01 21:12:17.402 0 0 E sec-fuelgauge 19-0036: sec_fg_get_atomic_capacity: capacity (old 0 : new 44)
- 02-01 21:12:17.402 0 0 E power_supply sec-fuelgauge: driver failed to report `energy_full' property: 4294967274
- 02-01 21:12:17.403 0 0 I sec-fuelgauge 19-0036: sec_fuelgauge_probe: fg_irq = 626
- 02-01 21:12:17.403 0 0 I sec-fuelgauge 19-0036: sec_fuelgauge_probe: SEC Fuelgauge Driver Loaded
- 02-01 21:12:17.403 0 0 I func : max77803_charger_init
- 02-01 21:12:17.403 0 0 I max77803_charger_probe: MAX77803 Charger driver probe
- 02-01 21:12:17.404 0 0 I : sec_charger_parse_dt use bat irq -22
- 02-01 21:12:17.404 0 0 E max77803-charger: max77803_charger_probe : Failed to get charger int
- 02-01 21:12:17.404 0 0 I max77803_irq_thread: interrupt source(0x01)
- 02-01 21:12:17.405 0 0 I max77803_irq_thread: charger interrupt(0x40)
- 02-01 21:12:17.408 0 0 I max77803_charger_initialize: battery cv voltage 0xdd
- 02-01 21:12:17.408 0 0 I max77803_charger_probe: device found: ver.0x4
- 02-01 21:12:17.408 0 0 I max77803_get_charger_state: CHG_DTLS : 0x 1
- 02-01 21:12:17.409 0 0 I max77803_get_health_state: reg_data(0x3)
- 02-01 21:12:17.409 0 0 E max77803_get_health_state: Fail to get psy (battery)
- 02-01 21:12:17.409 0 0 E max77803_get_vbus_state: Fail to get psy (battery)
- 02-01 21:12:17.410 0 0 I max77803_get_health_state: vbus_state : 0x3, chg_dtls : 0x1
- 02-01 21:12:17.410 0 0 I sec_chg_get_property: reg_data(93)
- 02-01 21:12:17.411 0 0 I max77803_get_input_current: CHG_CNFG_09(0x12)
- 02-01 21:12:17.411 0 0 I sec_chg_get_property: reg_data(93)
- 02-01 21:12:17.412 0 0 I max77803_get_charger_state: CHG_DTLS : 0x 1
- 02-01 21:12:17.412 0 0 I max77803_get_health_state: reg_data(0x3)
- 02-01 21:12:17.412 0 0 E max77803_get_health_state: Fail to get psy (battery)
- 02-01 21:12:17.412 0 0 E max77803_get_vbus_state: Fail to get psy (battery)
- 02-01 21:12:17.413 0 0 I max77803_get_health_state: vbus_state : 0x3, chg_dtls : 0x1
- 02-01 21:12:17.413 0 0 I sec_chg_get_property: reg_data(93)
- 02-01 21:12:17.414 0 0 I max77803_get_input_current: CHG_CNFG_09(0x12)
- 02-01 21:12:17.417 0 0 I input : pressure_sensor as /devices/virtual/input/input5
- 02-01 21:12:17.417 0 0 I input : gesture_sensor as /devices/virtual/input/input6
- 02-01 21:12:17.417 0 0 I input : light_sensor as /devices/virtual/input/input7
- 02-01 21:12:17.417 0 0 I input : proximity_sensor as /devices/virtual/input/input8
- 02-01 21:12:17.417 0 0 I input : temp_humidity_sensor as /devices/virtual/input/input9
- 02-01 21:12:17.417 0 0 I input : sig_motion_sensor as /devices/virtual/input/input10
- 02-01 21:12:17.417 0 0 I input : step_cnt_sensor as /devices/virtual/input/input11
- 02-01 21:12:17.417 0 0 I input : meta_event as /devices/virtual/input/input12
- 02-01 21:12:17.418 0 0 I [SSP] : requesting IRQ 622
- 02-01 21:12:17.418 0 0 I : [SSP] ssp_enable, enable = 1, old enable = 1
- 02-01 21:12:17.418 0 0 I : [SSP] change_rev = 1
- 02-01 21:12:17.424 0 0 I : [SSP] MCU Firm Rev : Old = 15081300, New = 15081300
- 02-01 21:12:17.434 0 0 I : [SSP] MCU device ID = 85, reading ID = 85
- 02-01 21:12:17.434 0 0 I : [SSP] Sensor Posision A : 6, G : 6, M: 3
- 02-01 21:12:17.457 0 0 E [SSP] : get_sensor_scanning_info - 0 3 255 255
- 02-01 21:12:17.465 0 0 I input : ssp_context as /devices/virtual/input/input13
- 02-01 21:12:17.465 0 0 I [SSP] : ssp_probe - setup debuglevel 0!
- 02-01 21:12:17.465 0 0 I [SSP] : ssp_probe - probe success!
- 02-01 21:12:17.465 0 0 I : #####################################################
- 02-01 21:12:17.465 0 0 I usbcore : registered new interface driver snd-usb-audio
- --------- beginning of events
- 02-01 21:12:17.466 266 274 I auditd : type=1325 audit(0.0:2): table=filter family=2 entries=0
- --------- beginning of main
- 02-01 21:12:17.466 274 274 W auditd : type=1325 audit(0.0:2): table=filter family=2 entries=0
- 02-01 21:12:17.466 266 274 I auditd : type=1325 audit(0.0:3): table=mangle family=2 entries=0
- 02-01 21:12:17.466 274 274 W auditd : type=1325 audit(0.0:3): table=mangle family=2 entries=0
- 02-01 21:12:17.466 266 274 I auditd : type=1325 audit(0.0:4): table=nat family=2 entries=0
- 02-01 21:12:17.466 274 274 W auditd : type=1325 audit(0.0:4): table=nat family=2 entries=0
- 02-01 21:12:17.466 266 274 I auditd : type=1325 audit(0.0:5): table=raw family=2 entries=0
- 02-01 21:12:17.466 274 274 W auditd : type=1325 audit(0.0:5): table=raw family=2 entries=0
- 02-01 21:12:17.466 266 274 I auditd : type=1325 audit(0.0:6): table=security family=2 entries=0
- 02-01 21:12:17.466 274 274 W auditd : type=1325 audit(0.0:6): table=security family=2 entries=0
- 02-01 21:12:17.466 266 274 I auditd : type=1325 audit(0.0:7): table=filter family=3 entries=0
- 02-01 21:12:17.466 274 274 W auditd : type=1325 audit(0.0:7): table=filter family=3 entries=0
- 02-01 21:12:17.466 0 0 I : +[ES325]=es325_init()
- 02-01 21:12:17.466 0 0 I =[ES325]=es325_init(): slim_driver_register()
- 02-01 21:12:17.466 0 0 I : -[ES325]=es325_init()
- 02-01 21:12:17.472 0 0 I msm-compr-dsp: msm_compr_probe: dev name msm-compr-dsp
- 02-01 21:12:17.473 0 0 I msm-pcm-lpa: msm_pcm_probe: dev name msm-pcm-lpa
- 02-01 21:12:17.474 0 0 I platform qcom,msm-voip-dsp.53: Driver msm-voip-dsp requests probe deferral
- 02-01 21:12:17.474 0 0 I platform qcom,msm-pcm-voice.54: Driver msm-pcm-voice requests probe deferral
- 02-01 21:12:17.476 266 274 I auditd : type=1325 audit(0.0:8): table=filter family=10 entries=0
- 02-01 21:12:17.476 274 274 W auditd : type=1325 audit(0.0:8): table=filter family=10 entries=0
- 02-01 21:12:17.476 266 274 I auditd : type=1325 audit(0.0:9): table=mangle family=10 entries=0
- 02-01 21:12:17.476 274 274 W auditd : type=1325 audit(0.0:9): table=mangle family=10 entries=0
- 02-01 21:12:17.476 266 274 I auditd : type=1325 audit(0.0:10): table=raw family=10 entries=0
- 02-01 21:12:17.476 274 274 W auditd : type=1325 audit(0.0:10): table=raw family=10 entries=0
- 02-01 21:12:17.476 0 0 I ocmem : Notifier registered for 5
- 02-01 21:12:17.476 0 0 I msm8974-asoc-taiko fe02b000.sound: msm8974_asoc_machine_probe(): hdmi audio support present
- 02-01 21:12:17.476 0 0 I platform fe02b000.sound: Driver msm8974-asoc-taiko requests probe deferral
- 02-01 21:12:17.478 0 0 I oprofile: using arm/armv7-krait
- 02-01 21:12:17.478 0 0 I : u32 classifier
- 02-01 21:12:17.478 0 0 I : Actions configured
- 02-01 21:12:17.478 0 0 I : Netfilter messages via NETLINK v0.30.
- 02-01 21:12:17.478 0 0 I : nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
- 02-01 21:12:17.478 0 0 I ctnetlink v0.93: registering with nfnetlink.
- 02-01 21:12:17.478 0 0 I NF_TPROXY: Transparent proxy support initialized, version 4.1.0
- 02-01 21:12:17.478 0 0 I NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
- 02-01 21:12:17.478 0 0 I xt_time : kernel timezone is -0000
- 02-01 21:12:17.478 0 0 I : 939-23012-001-quicksec-vpnclient-for-android-3.3.1-2811-b2567729009d-2015-01-30_13-36-53
- 02-01 21:12:17.478 0 0 I : vpnclient kernel spd loaded.
- 02-01 21:12:17.478 0 0 I ip_tables: (C) 2000-2006 Netfilter Core Team
- 02-01 21:12:17.478 0 0 I arp_tables: (C) 2002 David S. Miller
- 02-01 21:12:17.478 0 0 I TCP : cubic registered
- 02-01 21:12:17.478 0 0 I : Initializing XFRM netlink socket
- 02-01 21:12:17.479 0 0 I NET : Registered protocol family 10
- 02-01 21:12:17.480 0 0 I : Mobile IPv6
- 02-01 21:12:17.480 0 0 I ip6_tables: (C) 2000-2006 Netfilter Core Team
- 02-01 21:12:17.480 0 0 I : IPv6 over IPv4 tunneling driver
- 02-01 21:12:17.480 0 0 I NET : Registered protocol family 17
- 02-01 21:12:17.480 0 0 I NET : Registered protocol family 15
- 02-01 21:12:17.480 0 0 I : Bridge firewalling registered
- 02-01 21:12:17.480 0 0 I : Ebtables v2.0 registered
- 02-01 21:12:17.480 0 0 I Bluetooth: HIDP (Human Interface Emulation) ver 1.2
- 02-01 21:12:17.481 0 0 I : Registering SWP/SWPB emulation handler
- 02-01 21:12:17.485 0 0 I sec_debug_subsys_init: msm_shared_ram_phys=fa00000 SMEM_ID_VENDOR2=136 size=8780
- 02-01 21:12:17.485 0 0 I sec_debug_subsys_init: krait(fa1b330) rpm(fa1bbf8) modem(fa1c46c) dsps(fa1cce0)
- 02-01 21:12:17.485 0 0 F : **** secdbg_log or secdbg_paddr is not initialized ****
- 02-01 21:12:17.486 0 0 I ethernet_phy: disabling
- 02-01 21:12:17.486 0 0 I gdsc_oxili_gx: disabling
- 02-01 21:12:17.486 0 0 I gdsc_venus: disabling
- 02-01 21:12:17.486 0 0 I gpiochip_add: registered GPIOs 300 to 315 on device: ice-fpga-gpio
- 02-01 21:12:17.486 0 0 I sec_jack_probe: Registering jack driver
- 02-01 21:12:17.486 0 0 I sec_jack_populate_dt_pdata: earjack-detect-gpio =429
- 02-01 21:12:17.486 0 0 I msm8974-asoc-taiko fe02b000.sound: msm8974_asoc_machine_probe(): hdmi audio support present
- 02-01 21:12:17.486 0 0 I sec_jack_populate_dt_pdata: earjack-sendend-gpio =77
- 02-01 21:12:17.487 0 0 I sec_jack_populate_dt_pdata: earjack-micbias-gpio =441
- 02-01 21:12:17.487 0 0 I sec_jack_populate_dt_pdata: earjack-fsa_en-gpio =418
- 02-01 21:12:17.487 0 0 I platform fe02b000.sound: Driver msm8974-asoc-taiko requests probe deferral
- 02-01 21:12:17.487 0 0 I sec_jack_populate_dt_pdata: 4, 3, 10000, 10, 0
- 02-01 21:12:17.487 0 0 I sec_jack_populate_dt_pdata: 4, 936, 10000, 10, 0
- 02-01 21:12:17.487 0 0 I sec_jack_populate_dt_pdata: 4, 2400, 10000, 10, 1
- 02-01 21:12:17.487 0 0 I sec_jack_populate_dt_pdata: 4, 9999, 10000, 10, 1
- 02-01 21:12:17.487 0 0 I sec_jack_populate_dt_pdata: 3, 0, 0, 162
- 02-01 21:12:17.487 0 0 I sec_jack_populate_dt_pdata: 3, 1, 163, 325
- 02-01 21:12:17.487 0 0 I sec_jack_populate_dt_pdata: 3, 2, 326, 645
- 02-01 21:12:17.487 0 0 I : sec_jack_populate_dt_pdata - mpp-channel-scaling - 4 1 3
- 02-01 21:12:17.487 0 0 D gpio_request: gpio-425 (usb2_otg_sw) status -16
- 02-01 21:12:17.487 0 0 E reg-fixed-voltage regulator-tpd4s214.103: Could not obtain regulator enable GPIO 425: -16
- 02-01 21:12:17.487 0 0 W reg-fixed-voltage: probe of regulator-tpd4s214.103 failed with error -16
- 02-01 21:12:17.487 0 0 I sec_jack_detect_work: detect_irq(0)
- 02-01 21:12:17.487 0 0 I msm8974-asoc-taiko fe02b000.sound: msm8974_asoc_machine_probe(): hdmi audio support present
- 02-01 21:12:17.488 0 0 I platform fe02b000.sound: Driver msm8974-asoc-taiko requests probe deferral
- 02-01 21:12:17.488 0 0 I msm8974-asoc-taiko fe02b000.sound: msm8974_asoc_machine_probe(): hdmi audio support present
- 02-01 21:12:17.488 0 0 I platform fe02b000.sound: Driver msm8974-asoc-taiko requests probe deferral
- 02-01 21:12:17.489 0 0 I msm8974-asoc-taiko fe02b000.sound: msm8974_asoc_machine_probe(): hdmi audio support present
- 02-01 21:12:17.489 0 0 E gpio-keys gpio_keys.96: [Keys] no regulator: ignoring
- 02-01 21:12:17.489 0 0 I gpio-keys gpio_keys.96: gpio_keys_get_devtree_pdata: label:home_key, gpio:410, code:172, type:1, debounce:15
- 02-01 21:12:17.489 0 0 I gpio-keys gpio_keys.96: gpio_keys_get_devtree_pdata: label:volume_down, gpio:409, code:114, type:1, debounce:15
- 02-01 21:12:17.489 0 0 I gpio-keys gpio_keys.96: gpio_keys_get_devtree_pdata: label:volume_up, gpio:412, code:115, type:1, debounce:15
- 02-01 21:12:17.489 0 0 I gpio-keys gpio_keys.96: [Hall_IC] device tree was founded
- 02-01 21:12:17.489 0 0 I platform fe02b000.sound: Driver msm8974-asoc-taiko requests probe deferral
- 02-01 21:12:17.489 0 0 D gpio_set_debounce: gpio-410 status -22
- 02-01 21:12:17.489 0 0 D gpio_set_debounce: gpio-409 status -22
- 02-01 21:12:17.489 0 0 D gpio_set_debounce: gpio-412 status -22
- 02-01 21:12:17.489 0 0 I input : gpio-keys as /devices/gpio_keys.96/input/input14
- 02-01 21:12:17.489 0 0 D [HALL_IC]: gpio_keys_open
- 02-01 21:12:17.490 0 0 I gpio_keys_gpio_report_event: home_key key is released
- 02-01 21:12:17.490 0 0 E : sec_debug_check_crash_key code 172 value 0 state 0 enable 0
- 02-01 21:12:17.490 0 0 I gpio_keys_gpio_report_event: volume_down key is released
- 02-01 21:12:17.490 0 0 E : sec_debug_check_crash_key code 114 value 0 state 0 enable 0
- 02-01 21:12:17.490 0 0 I gpio_keys_gpio_report_event: volume_up key is released
- 02-01 21:12:17.490 0 0 E : sec_debug_check_crash_key code 115 value 0 state 0 enable 0
- 02-01 21:12:17.490 0 0 I qcom,qpnp-rtc qpnp-rtc-35: setting system clock to 2014-02-01 21:12:17 UTC (1391289137)
- 02-01 21:12:17.490 0 0 I msm8974-asoc-taiko fe02b000.sound: msm8974_asoc_machine_probe(): hdmi audio support present
- 02-01 21:12:17.490 0 0 I msm_thermal: interrupt_mode_init Interrupt mode init
- 02-01 21:12:17.490 0 0 I platform fe02b000.sound: Driver msm8974-asoc-taiko requests probe deferral
- 02-01 21:12:17.491 0 0 I : sec_bat_parse_dt reading bat_int_gpio = 407
- 02-01 21:12:17.491 0 0 I sec_bat_parse_dt: ta_irq_attr is Empty
- 02-01 21:12:17.491 0 0 I sec_bat_parse_dt: chg_temp_check: 0
- 02-01 21:12:17.491 0 0 I sec_bat_parse_dt: vendor : SDI SDI, technology : 2, cable_check_type : 4
- 02-01 21:12:17.491 0 0 I board_battery_init: assign temp adc table
- 02-01 21:12:17.496 0 0 I max77803_get_input_current: CHG_CNFG_09(0x12)
- 02-01 21:12:17.496 0 0 I max77803_get_input_current: CHG_CNFG_09(0x12)
- 02-01 21:12:17.496 0 0 E max17048_get_current_average: Fail to get psy (battery)
- 02-01 21:12:17.498 0 0 I sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (4328), data(0x0000)
- 02-01 21:12:17.510 0 0 I : Enabling Packed WR for the Toshiba eMMC
- 02-01 21:12:17.510 0 0 I mmc1 : BKOPS_EN bit = 0
- 02-01 21:12:17.521 0 0 I mmc1 : new HS200 MMC card at address 0001
- 02-01 21:12:17.521 0 0 I [mmc_blk_probe]mmcblk0: mmc1:0001 032G92 29.1 GiB , card->type:0
- 02-01 21:12:17.521 0 0 I mmcblk0rpmb: mmc1:0001 032G92 partition 3 512 KiB
- 02-01 21:12:17.524 0 0 I sec-battery battery.94: sec_bat_get_temperature_by_adc: Temp(351), Temp-ADC(31803)
- 02-01 21:12:17.524 0 0 I mmcblk0 : p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25
- 02-01 21:12:17.524 0 0 E max17048_rcomp_update: Fail to get psy (battery)
- 02-01 21:12:17.525 0 0 I sec-battery battery.94: sec_bat_get_temperature_by_adc: Temp(292), Temp-ADC(33000)
- 02-01 21:12:17.526 0 0 I msm8974-asoc-taiko fe02b000.sound: msm8974_asoc_machine_probe(): hdmi audio support present
- 02-01 21:12:17.526 0 0 I platform fe02b000.sound: Driver msm8974-asoc-taiko requests probe deferral
- 02-01 21:12:17.526 0 0 I sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (4328), data(0x0000)
- 02-01 21:12:17.526 0 0 I sec-fuelgauge 19-0036: sec_fg_get_scaled_capacity: scaled capacity (44.9)
- 02-01 21:12:17.526 0 0 I sec-battery battery.94: sec_bat_get_battery_info:Vnow(3665mV),Inow(450mA),Imax(0mA),SOC(44%),Tbat(351),is_hc_usb(0)
- 02-01 21:12:17.527 0 0 I sec-battery battery.94: sec_pogo_get_property: pogo charger is online (0)
- 02-01 21:12:17.527 0 0 I sec-battery battery.94: sec_pogo_get_property: pogo charger is online (0)
- 02-01 21:12:17.527 0 0 I sec-battery battery.94: sec_pogo_get_property: pogo charger is online (0)
- 02-01 21:12:17.527 0 0 I cable_initial_check: current_cable_type : (1)
- 02-01 21:12:17.527 0 0 I sec_chg_get_property: reg_data(93)
- 02-01 21:12:17.527 0 0 E cable_initial_check: ta_int_gpio is 0 or not assigned yet(cable_type(1))
- 02-01 21:12:17.529 0 0 I : sec_bat_check_cable_result_callback set ldo on
- 02-01 21:12:17.529 0 0 W 8941_l11: Failed to create debugfs directory
- 02-01 21:12:17.530 0 0 I : sec_bat_check_cable_result_callback set ldo off
- 02-01 21:12:17.530 0 0 W 8941_l11: Failed to create debugfs directory
- 02-01 21:12:17.530 0 0 I sec-battery battery.94: sec_battery_probe: SEC Battery Driver Loaded
- 02-01 21:12:17.531 0 0 I msm8974-asoc-taiko fe02b000.sound: msm8974_asoc_machine_probe(): hdmi audio support present
- 02-01 21:12:17.531 0 0 I platform fe02b000.sound: Driver msm8974-asoc-taiko requests probe deferral
- 02-01 21:12:17.531 0 0 I tspdrv : tspdrv_probe.
- 02-01 21:12:17.531 0 0 D : ImmVibeSPI_ForceOut_Initialize.
- 02-01 21:12:17.531 0 0 W 8941_l23: Failed to create debugfs directory
- 02-01 21:12:17.531 0 0 D : haptic power_off is finished.
- 02-01 21:12:17.531 0 0 D tspdrv : ImmVibeSPI_ForceOut_AmpDisable
- 02-01 21:12:17.532 0 0 I msm8974-asoc-taiko fe02b000.sound: msm8974_asoc_machine_probe(): hdmi audio support present
- 02-01 21:12:17.532 0 0 I platform fe02b000.sound: Driver msm8974-asoc-taiko requests probe deferral
- 02-01 21:12:17.532 0 0 I max77803_get_input_current: CHG_CNFG_09(0x12)
- 02-01 21:12:17.532 0 0 I clock_late_init: Removing enables held for handed-off clocks
- 02-01 21:12:17.532 0 0 I max77803_get_input_current: CHG_CNFG_09(0x12)
- 02-01 21:12:17.534 0 0 I sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (4328), data(0x0000)
- 02-01 21:12:17.539 0 0 W : dhd_module_init in
- 02-01 21:12:17.539 0 0 W : found wifi platform device bcmdhd_wlan
- 02-01 21:12:17.539 0 0 W : Power-up adapter 'DHD generic adapter'
- 02-01 21:12:17.539 0 0 W : wifi_platform_set_power = 1
- 02-01 21:12:17.539 0 0 I : ------------------------------------------------
- 02-01 21:12:17.539 0 0 I : ------------------------------------------------
- 02-01 21:12:17.539 0 0 I brcm_wlan_power Enter: power on
- 02-01 21:12:17.539 0 0 I WL_REG_ON on-step: [0]
- 02-01 21:12:17.539 0 0 I WL_REG_ON on-step-2: [1]
- 02-01 21:12:17.560 0 0 I sec-battery battery.94: sec_bat_get_temperature_by_adc: Temp(351), Temp-ADC(31804)
- 02-01 21:12:17.561 0 0 I sec-battery battery.94: sec_bat_get_temperature_by_adc: Temp(292), Temp-ADC(33000)
- 02-01 21:12:17.562 0 0 I sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (4328), data(0x0000)
- 02-01 21:12:17.562 0 0 I sec-fuelgauge 19-0036: sec_fg_get_scaled_capacity: scaled capacity (44.9)
- 02-01 21:12:17.562 0 0 I sec-battery battery.94: sec_bat_get_battery_info:Vnow(3752mV),Inow(450mA),Imax(0mA),SOC(44%),Tbat(351),is_hc_usb(0)
- 02-01 21:12:17.562 0 0 I sec-battery battery.94: sec_bat_battery_cable_check: Battery Connected
- 02-01 21:12:17.562 0 0 I sec-battery battery.94: sec_bat_monitor_work: Status(Discharging), Mode(None), Health(Good), Cable(1), Vendor(SDI SDI), level(100%)
- 02-01 21:12:17.699 0 0 I msm_thermal: msm_therm_temp_log Debug Temp for Sensor:
- 02-01 21:12:17.748 0 0 I msm_thermal: msm_therm_temp_log (0 --- 54)(1 --- 52)(2 --- 49)(3 --- 52)(4 --- 55)(5 --- 57)(6 --- 57)(7 --- 56)(8 --- 56)(9 --- 52)(10 --- 49)
- 02-01 21:12:17.748 0 0 I mmc2 : new high speed SDHC card at address aaaa
- 02-01 21:12:17.749 0 0 I [mmc_blk_probe]mmcblk1: mmc2:aaaa SL32G 28.7 GiB , card->type:1
- 02-01 21:12:17.769 0 0 W : wifi_platform_bus_enumerate device present 1
- 02-01 21:12:17.769 0 0 W : Enter brcm_wlan_set_carddetect
- 02-01 21:12:17.769 0 0 W : Enter brcm_wifi_status
- 02-01 21:12:17.769 0 0 W brcm_wifi_status: 477 status 1
- 02-01 21:12:17.769 0 0 I mmc0 : Slot status change detected (0 -> 1)
- 02-01 21:12:17.780 0 0 I mmcblk1 :
- 02-01 21:12:17.781 0 0 I msm8974-asoc-taiko fe02b000.sound: msm8974_asoc_machine_probe(): hdmi audio support present
- 02-01 21:12:17.781 0 0 I platform fe02b000.sound: Driver msm8974-asoc-taiko requests probe deferral
- 02-01 21:12:17.827 0 0 W mmc0 : queuing unknown CIS tuple 0x80 (2 bytes)
- 02-01 21:12:17.830 0 0 W mmc0 : queuing unknown CIS tuple 0x80 (7 bytes)
- 02-01 21:12:17.831 0 0 W mmc0 : queuing unknown CIS tuple 0x80 (3 bytes)
- 02-01 21:12:17.888 0 0 I sps : BAM 0xf9884000 (va:0xc7068000) enabled: ver:0x6, number of pipes:6
- 02-01 21:12:17.888 0 0 I sps : BAM 0xf9884000 (va:0xc7068000) enabled: ver:0x6, number of pipes:6
- 02-01 21:12:17.888 0 0 W msmsdcc_execute_tuning: set tuning_done ture.
- 02-01 21:12:17.891 0 0 W mmc0 : queuing unknown CIS tuple 0x91 (3 bytes)
- 02-01 21:12:17.891 0 0 I mmc0 : new ultra high speed SDR104 SDIO card at address 0001
- 02-01 21:12:17.891 0 0 I msm8974-asoc-taiko fe02b000.sound: msm8974_asoc_machine_probe(): hdmi audio support present
- 02-01 21:12:17.891 0 0 I platform fe02b000.sound: Driver msm8974-asoc-taiko requests probe deferral
- 02-01 21:12:17.892 0 0 I msm8974-asoc-taiko fe02b000.sound: msm8974_asoc_machine_probe(): hdmi audio support present
- 02-01 21:12:17.892 0 0 I platform fe02b000.sound: Driver msm8974-asoc-taiko requests probe deferral
- 02-01 21:12:17.908 0 0 W bcmsdh_sdmmc: bcmsdh_sdmmc_probe Enter
- 02-01 21:12:17.908 0 0 I msm8974-asoc-taiko fe02b000.sound: msm8974_asoc_machine_probe(): hdmi audio support present
- 02-01 21:12:17.908 0 0 I platform fe02b000.sound: Driver msm8974-asoc-taiko requests probe deferral
- 02-01 21:12:17.908 0 0 W bcmsdh_sdmmc: bcmsdh_sdmmc_probe Enter
- 02-01 21:12:17.908 0 0 W : bus num (host idx)=0, slot num (rca)=1
- 02-01 21:12:17.908 0 0 W : found adapter info 'DHD generic adapter'
- 02-01 21:12:17.908 0 0 W : alloc static buf at ea700000!
- 02-01 21:12:17.914 0 0 W : F1 signature OK, socitype:0x1 chip:0x4339 rev:0x1 pkg:0x0
- 02-01 21:12:17.914 0 0 W DHD : dongle ram size is set to 786432(orig 786432) at 0x180000
- 02-01 21:12:17.915 0 0 W wl_create_event_handler(): thread:wl_event_handler:eb started
- 02-01 21:12:17.915 0 0 I CFG80211-INFO2) wl_event_handler:
- 02-01 21:12:17.915 0 0 W : tsk Enter, tsk = 0xe9ded61c
- 02-01 21:12:17.915 0 0 W p2p0 : P2P Interface Registered
- 02-01 21:12:17.915 0 0 W dhd_attach(): thread:dhd_watchdog_thread:ec started
- 02-01 21:12:17.915 0 0 W dhd_attach(): thread:dhd_dpc:ed started
- 02-01 21:12:17.915 0 0 W dhd_attach(): thread:dhd_rxf:ee started
- 02-01 21:12:17.915 0 0 W dhd_deferred_work_init: work queue initialized
- 02-01 21:12:17.915 0 0 W : Dongle Host Driver, version 1.141.64.42 (security_patch)
- 02-01 21:12:17.916 0 0 W : Register interface [wlan0] MAC: 00:9e:81
- 02-01 21:12:17.916 0 0 I CFG80211-INFO2) wl_event_handler:
- 02-01 21:12:17.916 0 0 W : was terminated
- 02-01 21:12:17.916 0 0 W wl_destroy_event_handler(): thread:wl_event_handler:eb terminated OK
- 02-01 21:12:17.916 0 0 W dhd_prot_ioctl: bus is down. we have nothing to do
- 02-01 21:12:17.916 0 0 W dhd_wl_ioctl: WLC_IOCTL: cmd: 3, ret = -1
- 02-01 21:12:17.916 0 0 W : wifi_platform_set_power = 0
- 02-01 21:12:17.916 0 0 I : ------------------------------------------------
- 02-01 21:12:17.916 0 0 I : ------------------------------------------------
- 02-01 21:12:17.916 0 0 I brcm_wlan_power Enter: power off
- 02-01 21:12:17.920 0 0 I WL_REG_ON off-step: [1]
- 02-01 21:12:17.920 0 0 I WL_REG_ON off-step-2: [0]
- 02-01 21:12:17.989 0 0 D [keys] flip_cover_work: 1 code 0x15
- 02-01 21:12:18.029 0 0 I : ALSA device list:
- 02-01 21:12:18.029 0 0 I : No soundcards found.
- 02-01 21:12:18.029 0 0 W Warning : unable to open an initial console.
- 02-01 21:12:18.029 0 0 I : Freeing init memory: 56K
- 02-01 21:12:18.029 0 0 I msm8974-asoc-taiko fe02b000.sound: msm8974_asoc_machine_probe(): hdmi audio support present
- 02-01 21:12:18.029 0 0 I platform fe02b000.sound: Driver msm8974-asoc-taiko requests probe deferral
- 02-01 21:12:18.030 0 0 I init : init started!
- 02-01 21:12:18.033 0 0 D SELinux : 2048 avtab hash slots, 17810 rules.
- 02-01 21:12:18.044 0 0 D SELinux : 2048 avtab hash slots, 17810 rules.
- 02-01 21:12:18.044 0 0 D SELinux : 1 users, 2 roles, 979 types, 0 bools
- 02-01 21:12:18.044 0 0 W : , 1 sens, 1024 cats
- 02-01 21:12:18.044 0 0 D SELinux : 87 classes, 17810 rules
- 02-01 21:12:18.044 0 0 D SELinux : Completing initialization.
- 02-01 21:12:18.044 0 0 D SELinux : Setting up existing superblocks.
- 02-01 21:12:18.044 0 0 D SELinux : initialized (dev sysfs, type sysfs), uses genfs_contexts
- 02-01 21:12:18.044 0 0 D SELinux : initialized (dev rootfs, type rootfs), uses genfs_contexts
- 02-01 21:12:18.044 0 0 D SELinux : initialized (dev bdev, type bdev), not configured for labeling
- 02-01 21:12:18.044 0 0 D SELinux : initialized (dev proc, type proc), uses genfs_contexts
- 02-01 21:12:18.044 0 0 D SELinux : initialized (dev tmpfs, type tmpfs), uses transition SIDs
- 02-01 21:12:18.045 0 0 D SELinux : initialized (dev debugfs, type debugfs), uses genfs_contexts
- 02-01 21:12:18.051 0 0 D SELinux : initialized (dev sockfs, type sockfs), uses task SIDs
- 02-01 21:12:18.051 0 0 D SELinux : initialized (dev pipefs, type pipefs), uses task SIDs
- 02-01 21:12:18.051 0 0 D SELinux : initialized (dev anon_inodefs, type anon_inodefs), not configured for labeling
- 02-01 21:12:18.051 0 0 D SELinux : initialized (dev devpts, type devpts), uses transition SIDs
- 02-01 21:12:18.051 0 0 D SELinux : initialized (dev configfs, type configfs), uses genfs_contexts
- 02-01 21:12:18.051 0 0 D SELinux : initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
- 02-01 21:12:18.051 0 0 D SELinux : initialized (dev tmpfs, type tmpfs), uses transition SIDs
- 02-01 21:12:18.051 0 0 D SELinux : initialized (dev sysfs, type sysfs), uses genfs_contexts
- 02-01 21:12:18.220 266 274 I auditd : type=1403 audit(0.0:11): policy loaded auid=4294967295 ses=4294967295
- 02-01 21:12:18.220 274 274 I auditd : type=1403 audit(0.0:11): policy loaded auid=4294967295 ses=4294967295
- 02-01 21:12:18.223 0 0 I init : (Initializing SELinux non-enforcing took 0.19s.)
- 02-01 21:12:18.235 0 0 I init : init second stage started!
- 02-01 21:12:18.437 0 0 E init : waitpid failed: No child processes
- 02-01 21:12:18.437 0 0 I init : (Loading properties from /default.prop took 0.00s.)
- 02-01 21:12:18.438 0 0 I init : (Parsing /init.environ.rc took 0.00s.)
- 02-01 21:12:18.439 0 0 I init : (Parsing /init.usb.rc took 0.00s.)
- 02-01 21:12:18.440 0 0 E init : /init.qcom.rc: 1040: invalid command 'oneshot'
- 02-01 21:12:18.441 0 0 I init : (Parsing init.qcom.usb.rc took 0.00s.)
- 02-01 21:12:18.441 0 0 I init : (Parsing /init.qcom.rc took 0.00s.)
- 02-01 21:12:18.441 0 0 I init : (Parsing /init.usb.configfs.rc took 0.00s.)
- 02-01 21:12:18.441 0 0 I init : (Parsing /init.zygote32.rc took 0.00s.)
- 02-01 21:12:18.441 0 0 I init : (Parsing /init.trace.rc took 0.00s.)
- 02-01 21:12:18.441 0 0 I init : (Parsing init.supersu.rc took 0.00s.)
- 02-01 21:12:18.442 0 0 I init : (Parsing /init.cm.rc took 0.00s.)
- 02-01 21:12:18.442 0 0 I init : (Parsing /init.rc took 0.00s.)
- 02-01 21:12:18.442 0 0 E init : SELinux: Could not get canonical path /adb_keys restorecon: No such file or directory.
- 02-01 21:12:18.442 0 0 I init : Starting service 'ueventd'...
- 02-01 21:12:18.443 0 0 I init : write_file: Unable to open '/sys/block/zram0/comp_algorithm': No such file or directory
- 02-01 21:12:18.443 0 0 I init : Waiting for /dev/.coldboot_done...
- 02-01 21:12:18.444 0 0 I ueventd : ueventd started!
- 02-01 21:12:18.444 0 0 E ueventd : invalid line ueventd.rc line for '*/'
- 02-01 21:12:18.444 0 0 E ueventd : invalid uid 'fm_radio'
- 02-01 21:12:18.444 0 0 E ueventd : invalid line ueventd.rc line for '/*'
- 02-01 21:12:18.568 0 0 I max77803_get_charger_state: CHG_DTLS : 0x 1
- 02-01 21:12:18.568 0 0 I max77803_get_health_state: reg_data(0x3)
- 02-01 21:12:18.571 0 0 I max77803_get_health_state: vbus_state : 0x3, chg_dtls : 0x1
- 02-01 21:12:18.572 0 0 I sec_chg_get_property: reg_data(93)
- 02-01 21:12:18.572 0 0 I max77803_get_input_current: CHG_CNFG_09(0x12)
- 02-01 21:12:18.575 0 0 I max77803_get_input_current: CHG_CNFG_09(0x12)
- 02-01 21:12:18.576 0 0 I max77803_get_input_current: CHG_CNFG_09(0x12)
- 02-01 21:12:18.578 0 0 I sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (4328), data(0x0000)
- 02-01 21:12:18.579 0 0 I max77803_get_input_current: CHG_CNFG_09(0x12)
- 02-01 21:12:18.580 0 0 I max77803_get_input_current: CHG_CNFG_09(0x12)
- 02-01 21:12:18.582 0 0 I sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (4328), data(0x0000)
- 02-01 21:12:18.583 0 0 I sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (4328), data(0x0000)
- 02-01 21:12:18.583 0 0 I sec-fuelgauge 19-0036: sec_fg_get_scaled_capacity: scaled capacity (44.9)
- 02-01 21:12:18.583 0 0 E power_supply sec-fuelgauge: driver failed to report `energy_full' property: 4294967274
- 02-01 21:12:18.604 0 0 I sec-battery battery.94: sec_bat_get_temperature_by_adc: Temp(351), Temp-ADC(31805)
- 02-01 21:12:18.605 0 0 I sec-battery battery.94: sec_bat_get_temperature_by_adc: Temp(292), Temp-ADC(33000)
- 02-01 21:12:18.606 0 0 I sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (4328), data(0x0000)
- 02-01 21:12:18.606 0 0 I sec-fuelgauge 19-0036: sec_fg_get_scaled_capacity: scaled capacity (44.9)
- 02-01 21:12:18.606 0 0 I sec-battery battery.94: sec_bat_get_battery_info:Vnow(3770mV),Inow(450mA),Imax(0mA),SOC(44%),Tbat(351),is_hc_usb(0)
- 02-01 21:12:18.606 0 0 I sec-battery battery.94: sec_bat_battery_cable_check: Battery Connected
- 02-01 21:12:18.606 0 0 I sec-battery battery.94: sec_bat_monitor_work: Status(Discharging), Mode(None), Health(Good), Cable(1), Vendor(SDI SDI), level(100%)
- 02-01 21:12:19.130 0 0 I sec-battery battery.94: sec_pogo_get_property: pogo charger is online (0)
- 02-01 21:12:19.179 0 0 I ueventd : Coldboot took 0.73s.
- 02-01 21:12:19.182 0 0 I init : Waiting for /dev/.coldboot_done took 0.74s.
- 02-01 21:12:19.183 0 0 E init : could not open /dev/keychord: No such file or directory
- 02-01 21:12:19.239 0 0 I max77803-muic: func:max77803_muic_init_detect
- 02-01 21:12:19.240 0 0 I max77803-muic: func:max77803_muic_detect_dev CONTROL1:9
- 02-01 21:12:19.240 0 0 I max77803-muic: func:max77803_muic_detect_dev irq:-1 ret:0
- 02-01 21:12:19.240 0 0 I max77803-muic: max77803_muic_detect_dev: STATUS1:0x3f, 2:0x41
- 02-01 21:12:19.240 0 0 I max77803-muic: adc:1f adcerr:0 chgtyp:1 vb:40 dxovp:0 cable_type:20
- 02-01 21:12:19.240 0 0 I max77803-muic: max77803_muic_detect_dev: ATTACHED
- 02-01 21:12:19.240 0 0 I max77803-muic: func:max77803_muic_handle_attach st1:3f st2:41 cable_type:20
- 02-01 21:12:19.240 0 0 I max77803-muic: func:max77803_muic_attach_usb_type adc:1f cable_type:20
- 02-01 21:12:19.240 0 0 I max77803-muic: max77803_muic_attach_usb_type:USB
- 02-01 21:12:19.240 0 0 I max77803-muic: func:max77803_muic_set_charging_type cable_type:1: force_disable:0
- 02-01 21:12:19.240 0 0 I max77803_muic_charger_cb: cable type : 1
- 02-01 21:12:19.240 0 0 I max77803_muic_charger_cb: cable type for charger: cable_type(1), previous_cable_type(0)
- 02-01 21:12:19.240 0 0 I sec-battery battery.94: sec_bat_set_property: current_cable(4), wc_status(0), wire_status(4)
- 02-01 21:12:19.240 0 0 I max77803-muic: func:max77803_muic_set_usb_path path:0, cable_type:1
- 02-01 21:12:19.240 0 0 I max77803_muic_set_safeout: MUIC safeout path=0
- 02-01 21:12:19.241 0 0 I max77803-muic: max77803_muic_set_usb_path: AP_USB_MODE
- 02-01 21:12:19.241 0 0 I max77803-muic: max77803_muic_set_usb_path: Set manual path
- 02-01 21:12:19.244 0 0 I max77803-muic: max77803_muic_set_usb_path: CNTL1(0x09)
- 02-01 21:12:19.244 0 0 I max77803-muic: max77803_muic_set_usb_path: CNTL2(0x3e)
- 02-01 21:12:19.245 0 0 I : sec_bat_check_cable_result_callback set ldo on
- 02-01 21:12:19.245 0 0 W 8941_l11: Failed to create debugfs directory
- 02-01 21:12:19.248 0 0 I max77803_set_charge_current: reg_data(0x8b), charge(460)
- 02-01 21:12:19.254 0 0 I max77803_set_topoff_current: reg_data(0x24), topoff(200)
- 02-01 21:12:19.255 0 0 I sec-battery battery.94: sec_bat_cable_work: Status:Charging, Sleep:No, Charging:Yes, Short Poll:Yes
- 02-01 21:12:19.255 0 0 I sec-battery battery.94: sec_bat_cable_work: Polling time is reset to 30 sec.
- 02-01 21:12:19.279 0 0 D SELinux : initialized (dev cgroup, type cgroup), uses genfs_contexts
- 02-01 21:12:19.279 0 0 D SELinux : initialized (dev tmpfs, type tmpfs), uses transition SIDs
- 02-01 21:12:19.349 0 0 D SELinux : initialized (dev cgroup, type cgroup), uses genfs_contexts
- 02-01 21:12:19.350 0 0 D SELinux : initialized (dev tmpfs, type tmpfs), uses transition SIDs
- 02-01 21:12:19.352 0 0 I init : write_file: Unable to open '/proc/sys/kernel/sched_compat_yield': No such file or directory
- 02-01 21:12:19.399 0 0 D SELinux : initialized (dev cgroup, type cgroup), uses genfs_contexts
- 02-01 21:12:19.399 0 0 I init : write_file: Unable to write to '/dev/cpuctl/cpu.shares': Invalid argument
- 02-01 21:12:19.401 0 0 I init : write_file: Unable to open '/proc/sys/abi/swp': No such file or directory
- 02-01 21:12:19.410 0 0 I EXT4-fs (mmcblk0p23): mounted filesystem with ordered data mode. Opts: barrier=1
- 02-01 21:12:19.410 0 0 D SELinux : initialized (dev mmcblk0p23, type ext4), uses xattr
- 02-01 21:12:19.410 0 0 I fs_mgr : __mount(source=/dev/block/platform/msm_sdcc.1/by-name/system,target=/system,type=ext4)=0
- 02-01 21:12:19.410 0 0 D : mmc_blk_ioctl ], 125d
- 02-01 21:12:19.410 0 0 D mmc_blk_ioctl: Invalid ioctl command
- 02-01 21:12:19.415 0 0 I F2FS-fs (mmcblk0p24): Magic Mismatch, valid(0xf2f52010) - read(0x4ce0)
- 02-01 21:12:19.415 0 0 E F2FS-fs (mmcblk0p24): Can't find valid F2FS filesystem in 1th superblock
- 02-01 21:12:19.415 0 0 I F2FS-fs (mmcblk0p24): Magic Mismatch, valid(0xf2f52010) - read(0x0)
- 02-01 21:12:19.415 0 0 E F2FS-fs (mmcblk0p24): Can't find valid F2FS filesystem in 2th superblock
- 02-01 21:12:19.415 0 0 I F2FS-fs (mmcblk0p24): Magic Mismatch, valid(0xf2f52010) - read(0x4ce0)
- 02-01 21:12:19.415 0 0 E F2FS-fs (mmcblk0p24): Can't find valid F2FS filesystem in 1th superblock
- 02-01 21:12:19.415 0 0 I F2FS-fs (mmcblk0p24): Magic Mismatch, valid(0xf2f52010) - read(0x0)
- 02-01 21:12:19.415 0 0 E F2FS-fs (mmcblk0p24): Can't find valid F2FS filesystem in 2th superblock
- 02-01 21:12:19.489 0 0 I fs_mgr : __mount(source=/dev/block/platform/msm_sdcc.1/by-name/cache,target=/cache,type=f2fs)=-1
- 02-01 21:12:19.496 0 0 I EXT4-fs (mmcblk0p24): recovery complete
- 02-01 21:12:19.497 0 0 I EXT4-fs (mmcblk0p24): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
- 02-01 21:12:19.497 0 0 D SELinux : initialized (dev mmcblk0p24, type ext4), uses xattr
- 02-01 21:12:19.497 0 0 I fs_mgr : check_fs(): mount(/dev/block/platform/msm_sdcc.1/by-name/cache,/cache,ext4)=0: Success
- 02-01 21:12:19.579 0 0 I fs_mgr : check_fs(): unmount(/cache) succeeded
- 02-01 21:12:19.579 0 0 I fs_mgr : Running /system/bin/e2fsck on /dev/block/platform/msm_sdcc.1/by-name/cache
- 02-01 21:12:19.624 0 0 I e2fsck : e2fsck 1.42.9 (28-Dec-2013)
- 02-01 21:12:19.624 0 0 I e2fsck : /dev/block/platform/msm_sdcc.1/by-name/cache: clean, 18/19680 files, 2559/78643 blocks
- 02-01 21:12:19.626 0 0 I EXT4-fs (mmcblk0p24): barriers disabled
- 02-01 21:12:19.627 0 0 I EXT4-fs (mmcblk0p24): mounted filesystem with ordered data mode. Opts: barrier=0,discard,data=ordered,nomblk_io_submit,noauto_da_alloc,errors=panic
- 02-01 21:12:19.627 0 0 D SELinux : initialized (dev mmcblk0p24, type ext4), uses xattr
- 02-01 21:12:19.627 0 0 I fs_mgr : __mount(source=/dev/block/platform/msm_sdcc.1/by-name/cache,target=/cache,type=ext4)=0
- 02-01 21:12:19.627 0 0 E fs_mgr : mount_with_alternatives(): Mounted /dev/block/platform/msm_sdcc.1/by-name/cache on /cache with fs_type=ext4 instead of f2fs
- 02-01 21:12:19.631 0 0 I F2FS-fs (mmcblk0p25): Magic Mismatch, valid(0xf2f52010) - read(0x1a45a0)
- 02-01 21:12:19.631 0 0 E F2FS-fs (mmcblk0p25): Can't find valid F2FS filesystem in 1th superblock
- 02-01 21:12:19.631 0 0 I F2FS-fs (mmcblk0p25): Magic Mismatch, valid(0xf2f52010) - read(0x100000)
- 02-01 21:12:19.631 0 0 E F2FS-fs (mmcblk0p25): Can't find valid F2FS filesystem in 2th superblock
- 02-01 21:12:19.631 0 0 I F2FS-fs (mmcblk0p25): Magic Mismatch, valid(0xf2f52010) - read(0x1a45a0)
- 02-01 21:12:19.631 0 0 E F2FS-fs (mmcblk0p25): Can't find valid F2FS filesystem in 1th superblock
- 02-01 21:12:19.631 0 0 I F2FS-fs (mmcblk0p25): Magic Mismatch, valid(0xf2f52010) - read(0x100000)
- 02-01 21:12:19.631 0 0 E F2FS-fs (mmcblk0p25): Can't find valid F2FS filesystem in 2th superblock
- 02-01 21:12:19.729 0 0 I fs_mgr : __mount(source=/dev/block/platform/msm_sdcc.1/by-name/userdata,target=/data,type=f2fs)=-1
- 02-01 21:12:19.736 0 0 I EXT4-fs (mmcblk0p25): recovery complete
- 02-01 21:12:19.736 0 0 I EXT4-fs (mmcblk0p25): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
- 02-01 21:12:19.736 0 0 D SELinux : initialized (dev mmcblk0p25, type ext4), uses xattr
- 02-01 21:12:19.736 0 0 I fs_mgr : check_fs(): mount(/dev/block/platform/msm_sdcc.1/by-name/userdata,/data,ext4)=0: Success
- 02-01 21:12:19.755 0 0 I max77803_get_input_current: CHG_CNFG_09(0x12)
- 02-01 21:12:19.755 0 0 I max77803_get_input_current: CHG_CNFG_09(0x12)
- 02-01 21:12:19.757 0 0 I sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (4328), data(0x0000)
- 02-01 21:12:19.783 0 0 I sec-battery battery.94: sec_bat_get_temperature_by_adc: Temp(351), Temp-ADC(31803)
- 02-01 21:12:19.785 0 0 I sec-battery battery.94: sec_bat_get_temperature_by_adc: Temp(292), Temp-ADC(33000)
- 02-01 21:12:19.786 0 0 I sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (4328), data(0x0000)
- 02-01 21:12:19.786 0 0 I sec-fuelgauge 19-0036: sec_fg_get_scaled_capacity: scaled capacity (44.9)
- 02-01 21:12:19.786 0 0 I sec-battery battery.94: sec_bat_get_battery_info:Vnow(3803mV),Inow(450mA),Imax(460mA),SOC(44%),Tbat(351),is_hc_usb(0)
- 02-01 21:12:19.786 0 0 I sec_bat_check_callback: battery->pdata->bat_irq_gpio(407)
- 02-01 21:12:19.786 0 0 I sec_bat_check_callback: Battery status(1)
- 02-01 21:12:19.786 0 0 I sec-battery battery.94: sec_bat_battery_cable_check: Battery Connected
- 02-01 21:12:19.787 0 0 I max77803_get_health_state: reg_data(0x3)
- 02-01 21:12:19.788 0 0 I max77803_get_health_state: vbus_state : 0x3, chg_dtls : 0x1
- 02-01 21:12:19.788 0 0 I sec-battery battery.94: sec_bat_monitor_work: Status(Charging), Mode(Normal), Health(Good), Cable(4), Vendor(SDI SDI), level(100%)
- 02-01 21:12:19.829 0 0 I fs_mgr : check_fs(): unmount(/data) succeeded
- 02-01 21:12:19.829 0 0 I fs_mgr : Running /system/bin/e2fsck on /dev/block/platform/msm_sdcc.1/by-name/userdata
- 02-01 21:12:19.861 0 0 I e2fsck : e2fsck 1.42.9 (28-Dec-2013)
- 02-01 21:12:19.861 0 0 I e2fsck : /dev/block/platform/msm_sdcc.1/by-name/userdata: clean, 2172/1721760 files, 188929/6902611 blocks
- 02-01 21:12:19.862 0 0 I EXT4-fs (mmcblk0p25): barriers disabled
- 02-01 21:12:19.863 0 0 I EXT4-fs (mmcblk0p25): mounted filesystem with ordered data mode. Opts: barrier=0,discard,data=ordered,nomblk_io_submit,noauto_da_alloc,errors=panic
- 02-01 21:12:19.863 0 0 D SELinux : initialized (dev mmcblk0p25, type ext4), uses xattr
- 02-01 21:12:19.863 0 0 I fs_mgr : __mount(source=/dev/block/platform/msm_sdcc.1/by-name/userdata,target=/data,type=ext4)=0
- 02-01 21:12:19.863 0 0 E fs_mgr : mount_with_alternatives(): Mounted /dev/block/platform/msm_sdcc.1/by-name/userdata on /data with fs_type=ext4 instead of f2fs
- 02-01 21:12:19.872 0 0 I EXT4-fs (mmcblk0p11): recovery complete
- 02-01 21:12:19.872 0 0 D SELinux : initialized (dev mmcblk0p11, type ext4), uses xattr
- 02-01 21:12:19.872 0 0 I fs_mgr : check_fs(): mount(/dev/block/platform/msm_sdcc.1/by-name/efs,/efs,ext4)=0: Success
- 02-01 21:12:19.979 0 0 I fs_mgr : check_fs(): unmount(/efs) succeeded
- 02-01 21:12:19.979 0 0 I fs_mgr : Running /system/bin/e2fsck on /dev/block/platform/msm_sdcc.1/by-name/efs
- 02-01 21:12:19.995 0 0 I e2fsck : e2fsck 1.42.9 (28-Dec-2013)
- 02-01 21:12:19.995 0 0 I e2fsck : /dev/block/platform/msm_sdcc.1/by-name/efs: clean, 98/896 files, 1215/3584 blocks
- 02-01 21:12:19.998 0 0 D SELinux : initialized (dev mmcblk0p11, type ext4), uses xattr
- 02-01 21:12:19.998 0 0 I fs_mgr : __mount(source=/dev/block/platform/msm_sdcc.1/by-name/efs,target=/efs,type=ext4)=0
- 02-01 21:12:20.004 0 0 D SELinux : initialized (dev mmcblk0p21, type ext4), uses xattr
- 02-01 21:12:20.004 0 0 I fs_mgr : __mount(source=/dev/block/platform/msm_sdcc.1/by-name/persist,target=/persist,type=ext4)=0
- 02-01 21:12:20.004 179 179 I FAT-fs (mmcblk0p1[179: 1]): trying to mount...
- 02-01 21:12:20.010 179 179 I FAT-fs (mmcblk0p1[179: 1]): mounted successfully!
- 02-01 21:12:20.010 0 0 D SELinux : initialized (dev mmcblk0p1, type vfat), uses genfs_contexts
- 02-01 21:12:20.010 0 0 I fs_mgr : __mount(source=/dev/block/platform/msm_sdcc.1/by-name/apnhlos,target=/firmware,type=vfat)=0
- 02-01 21:12:20.010 0 0 D : mmc_blk_ioctl ], 125d
- 02-01 21:12:20.010 0 0 D mmc_blk_ioctl: Invalid ioctl command
- 02-01 21:12:20.010 179 179 I FAT-fs (mmcblk0p2[179: 2]): trying to mount...
- 02-01 21:12:20.015 179 179 I FAT-fs (mmcblk0p2[179: 2]): mounted successfully!
- 02-01 21:12:20.015 0 0 D SELinux : initialized (dev mmcblk0p2, type vfat), uses genfs_contexts
- 02-01 21:12:20.015 0 0 I fs_mgr : __mount(source=/dev/block/platform/msm_sdcc.1/by-name/modem,target=/firmware-modem,type=vfat)=0
- 02-01 21:12:20.015 0 0 D : mmc_blk_ioctl ], 125d
- 02-01 21:12:20.015 0 0 D mmc_blk_ioctl: Invalid ioctl command
- 02-01 21:12:20.419 0 0 I : max77803_chgin_init_work
- 02-01 21:12:20.795 0 0 I max77803_get_input_current: CHG_CNFG_09(0x12)
- 02-01 21:12:20.796 0 0 I max77803_get_input_current: CHG_CNFG_09(0x12)
- 02-01 21:12:20.797 0 0 I sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (4328), data(0x0000)
- 02-01 21:12:20.824 0 0 I sec-battery battery.94: sec_bat_get_temperature_by_adc: Temp(351), Temp-ADC(31804)
- 02-01 21:12:20.825 0 0 I sec-battery battery.94: sec_bat_get_temperature_by_adc: Temp(292), Temp-ADC(33000)
- 02-01 21:12:20.825 0 0 I sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (4328), data(0x0000)
- 02-01 21:12:20.825 0 0 I sec-fuelgauge 19-0036: sec_fg_get_scaled_capacity: scaled capacity (44.9)
- 02-01 21:12:20.825 0 0 I sec-battery battery.94: sec_bat_get_battery_info:Vnow(3818mV),Inow(450mA),Imax(460mA),SOC(44%),Tbat(351),is_hc_usb(0)
- 02-01 21:12:20.825 0 0 I sec_bat_check_callback: battery->pdata->bat_irq_gpio(407)
- 02-01 21:12:20.825 0 0 I sec_bat_check_callback: Battery status(1)
- 02-01 21:12:20.825 0 0 I sec-battery battery.94: sec_bat_battery_cable_check: Battery Connected
- 02-01 21:12:20.826 0 0 I max77803_get_health_state: reg_data(0x3)
- 02-01 21:12:20.828 0 0 I max77803_get_health_state: vbus_state : 0x3, chg_dtls : 0x1
- 02-01 21:12:20.828 0 0 I sec-battery battery.94: sec_bat_time_management: Charging Time : 2 secs
- 02-01 21:12:20.828 0 0 I sec-battery battery.94: sec_bat_temperature: HLT(2000) HLR(2000) HT(600), HR(400), LT(-50), LR(0)
- 02-01 21:12:20.828 0 0 I sec-battery battery.94: sec_bat_fullcharged_check: Charging Mode : Normal
- 02-01 21:12:20.828 0 0 I sec-battery battery.94: sec_bat_monitor_work: Status(Charging), Mode(Normal), Health(Good), Cable(4), Vendor(SDI SDI), level(100%)
- 02-01 21:12:21.509 0 0 E dwc3 f9200000.dwc3: dwc3_otg_init_sm: completion timeout
- 02-01 21:12:21.514 0 0 I msm-dwc3 msm_dwc3: DWC3 in low power mode
- 02-01 21:12:22.709 0 0 I msm_thermal: msm_therm_temp_log Debug Temp for Sensor:
- 02-01 21:12:26.239 0 0 I msm_thermal: msm_therm_temp_log (0 --- 50)(1 --- 49)(2 --- 48)(3 --- 50)(4 --- 50)(5 --- 51)(6 --- 51)(7 --- 50)(8 --- 51)(9 --- 49)(10 --- 48)
- 02-01 21:12:26.239 0 0 I : khhan expTimer_service 142
- 02-01 21:12:26.239 0 0 I max77803-muic: func:max77803_muic_usb_detect info->muic_data->sw_path:0
- 02-01 21:12:26.239 0 0 I max77803_muic_usb_cb: MUIC attached: 1
- 02-01 21:12:26.239 0 0 I max77803_muic_set_safeout: MUIC safeout path=0
- 02-01 21:12:26.240 0 0 I usb : dwc3 power supply set(1)
- 02-01 21:12:26.240 0 0 I msm-dwc3 msm_dwc3: dwc3_msm_power_set_property_usb: !mdwc->ext_inuse(1), mdwc->ext_xceiv.otg_capability(1), !init(1)
- 02-01 21:12:26.240 0 0 I msm-dwc3 msm_dwc3: dwc3_msm_power_set_property_usb: queue_delayed_work mdwc->resume_work
- 02-01 21:12:26.359 0 0 I msm-dwc3 msm_dwc3: dwc3_resume_work
- 02-01 21:12:26.359 0 0 I msm-dwc3 msm_dwc3: dwc3_resume_work: pm_runtime_get_sync entered
- 02-01 21:12:26.365 0 0 I msm-dwc3 msm_dwc3: DWC3 exited from low power mode
- 02-01 21:12:27.434 0 0 I [SSP] : MSG From MCU - Init
- 02-01 21:12:27.619 0 0 I [SSP] : debug_work_func(6) - Sensor state: 0x3ffff, RC: 0, MS: 0 Santi: 0 Dump: 0
- 02-01 21:12:27.625 0 0 I : [SSP] Sensor Posision A : 6, G : 6, M: 3
- 02-01 21:12:27.719 0 0 I msm_thermal: msm_therm_temp_log Debug Temp for Sensor:
- 02-01 21:12:30.868 0 0 I msm_thermal: msm_therm_temp_log (0 --- 49)(1 --- 49)(2 --- 48)(3 --- 49)(4 --- 50)(5 --- 50)(6 --- 50)(7 --- 50)(8 --- 50)(9 --- 49)(10 --- 48)
- 02-01 21:12:30.868 0 0 I max77803_get_input_current: CHG_CNFG_09(0x12)
- 02-01 21:12:30.868 0 0 I max77803_get_input_current: CHG_CNFG_09(0x12)
- 02-01 21:12:30.870 0 0 I sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (4328), data(0x0000)
- 02-01 21:12:30.896 0 0 I sec-battery battery.94: sec_bat_get_temperature_by_adc: Temp(351), Temp-ADC(31802)
- 02-01 21:12:30.897 0 0 I sec-battery battery.94: sec_bat_get_temperature_by_adc: Temp(292), Temp-ADC(33000)
- 02-01 21:12:30.898 0 0 I sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (4328), data(0x0000)
- 02-01 21:12:30.898 0 0 I sec-fuelgauge 19-0036: sec_fg_get_scaled_capacity: scaled capacity (44.9)
- 02-01 21:12:30.898 0 0 I sec-battery battery.94: sec_bat_get_battery_info:Vnow(3820mV),Inow(450mA),Imax(460mA),SOC(44%),Tbat(351),is_hc_usb(0)
- 02-01 21:12:30.898 0 0 I sec_bat_check_callback: battery->pdata->bat_irq_gpio(407)
- 02-01 21:12:30.898 0 0 I sec_bat_check_callback: Battery status(1)
- 02-01 21:12:30.898 0 0 I sec-battery battery.94: sec_bat_battery_cable_check: Battery Connected
- 02-01 21:12:30.899 0 0 I max77803_get_health_state: reg_data(0x3)
- 02-01 21:12:30.900 0 0 I max77803_get_health_state: vbus_state : 0x3, chg_dtls : 0x1
- 02-01 21:12:30.900 0 0 I sec-battery battery.94: sec_bat_monitor_work: Status(Charging), Mode(Normal), Health(Good), Cable(4), Vendor(SDI SDI), level(100%)
- 02-01 21:12:32.729 0 0 I msm_thermal: msm_therm_temp_log Debug Temp for Sensor:
- 02-01 21:12:37.739 0 0 I msm_thermal: msm_therm_temp_log (0 --- 49)(1 --- 49)(2 --- 48)(3 --- 49)(4 --- 49)(5 --- 50)(6 --- 50)(7 --- 49)(8 --- 50)(9 --- 49)(10 --- 48)
- 02-01 21:12:37.739 0 0 I msm_thermal: msm_therm_temp_log Debug Temp for Sensor:
- 02-01 21:12:38.279 0 0 I msm_thermal: msm_therm_temp_log (0 --- 49)(1 --- 49)(2 --- 47)(3 --- 49)(4 --- 49)(5 --- 50)(6 --- 50)(7 --- 49)(8 --- 50)(9 --- 49)(10 --- 48)
- 02-01 21:12:38.279 0 0 I max77803-muic: func:max77803_muic_dock_usb_detect info->muic_data->sw_path:0
- 02-01 21:12:38.639 0 0 I [SSP] : debug_work_func(1) - Sensor state: 0x3ffff, RC: 0, MS: 0 Santi: 0 Dump: 0
- 02-01 21:12:38.647 0 0 I : [SSP] Sensor Posision A : 6, G : 6, M: 3
- 02-01 21:12:40.915 0 0 I max77803_get_input_current: CHG_CNFG_09(0x12)
- 02-01 21:12:40.916 0 0 I max77803_get_input_current: CHG_CNFG_09(0x12)
- 02-01 21:12:40.917 0 0 I sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (4328), data(0x0000)
- 02-01 21:12:40.944 0 0 I sec-battery battery.94: sec_bat_get_temperature_by_adc: Temp(351), Temp-ADC(31799)
- 02-01 21:12:40.944 0 0 I sec-battery battery.94: sec_bat_get_temperature_by_adc: Temp(292), Temp-ADC(33000)
- 02-01 21:12:40.945 0 0 I sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (4328), data(0x0000)
- 02-01 21:12:40.945 0 0 I sec-fuelgauge 19-0036: sec_fg_get_scaled_capacity: scaled capacity (44.9)
- 02-01 21:12:40.945 0 0 I sec-battery battery.94: sec_bat_get_battery_info:Vnow(3821mV),Inow(450mA),Imax(460mA),SOC(44%),Tbat(351),is_hc_usb(0)
- 02-01 21:12:40.945 0 0 I sec_bat_check_callback: battery->pdata->bat_irq_gpio(407)
- 02-01 21:12:40.945 0 0 I sec_bat_check_callback: Battery status(1)
- 02-01 21:12:40.945 0 0 I sec-battery battery.94: sec_bat_battery_cable_check: Battery Connected
- 02-01 21:12:40.946 0 0 I max77803_get_health_state: reg_data(0x3)
- 02-01 21:12:40.948 0 0 I max77803_get_health_state: vbus_state : 0x3, chg_dtls : 0x1
- 02-01 21:12:40.948 0 0 I sec-battery battery.94: sec_bat_monitor_work: Status(Charging), Mode(Normal), Health(Good), Cable(4), Vendor(SDI SDI), level(100%)
- 02-01 21:12:41.319 0 0 I max77803-muic: func:max77803_muic_mhl_detect cable_type:1
- 02-01 21:12:42.749 0 0 I msm_thermal: msm_therm_temp_log Debug Temp for Sensor:
- 02-01 21:12:46.043 0 0 I msm_thermal: msm_therm_temp_log (0 --- 49)(1 --- 49)(2 --- 47)(3 --- 49)(4 --- 49)(5 --- 50)(6 --- 50)(7 --- 49)(8 --- 50)(9 --- 49)(10 --- 48)
- 02-01 21:12:46.043 0 0 E : reading MSM_THERM_CH [rc = 0] [adc_code = 30197]
- 02-01 21:12:46.069 0 0 I sec-thermistor: sec_therm_polling_work: adc=30198
- 02-01 21:12:46.070 0 0 I sec-thermistor: sec_therm_polling_work: temper=440
- 02-01 21:12:46.074 0 0 E : reading LR_MUX9_PU2_AMUX_THM5 [rc = 0] [adc_code = 30630]
- 02-01 21:12:46.078 0 0 E : reading LR_MUX9_PU2_AMUX_THM5 [rc = 0] [adc_code = 30630]
- 02-01 21:12:46.083 0 0 E : reading LR_MUX9_PU2_AMUX_THM5 [rc = 0] [adc_code = 30629]
- 02-01 21:12:46.087 0 0 E : reading LR_MUX9_PU2_AMUX_THM5 [rc = 0] [adc_code = 30630]
- 02-01 21:12:46.091 0 0 E : reading LR_MUX9_PU2_AMUX_THM5 [rc = 0] [adc_code = 30628]
- 02-01 21:12:46.096 0 0 E : reading LR_MUX9_PU2_AMUX_THM5 [rc = 0] [adc_code = 30630]
- 02-01 21:12:46.100 0 0 E : reading LR_MUX9_PU2_AMUX_THM5 [rc = 0] [adc_code = 30629]
- 02-01 21:12:46.100 0 0 I sec-thermistor: sec_therm_polling_work: adc_flash=30629
- 02-01 21:12:46.100 0 0 I sec-thermistor: sec_therm_polling_work: temper_flash=418
- 02-01 21:12:46.100 0 0 I sec-thermistor: notify_change_of_temperature: siop_level=-1
- 02-01 21:12:46.100 0 0 I sec-thermistor: notify_change_of_temperature: uevent: SUBTEMPERATURE=440
- 02-01 21:12:47.759 0 0 I msm_thermal: msm_therm_temp_log Debug Temp for Sensor:
- 02-01 21:12:49.639 0 0 I msm_thermal: msm_therm_temp_log (0 --- 49)(1 --- 49)(2 --- 47)(3 --- 49)(4 --- 49)(5 --- 50)(6 --- 50)(7 --- 49)(8 --- 49)(9 --- 49)(10 --- 48)
- 02-01 21:12:49.639 0 0 I [SSP] : debug_work_func(1) - Sensor state: 0x3ffff, RC: 0, MS: 0 Santi: 0 Dump: 0
- 02-01 21:12:49.647 0 0 I : [SSP] Sensor Posision A : 6, G : 6, M: 3
- 02-01 21:12:50.955 0 0 I max77803_get_input_current: CHG_CNFG_09(0x12)
- 02-01 21:12:50.956 0 0 I max77803_get_input_current: CHG_CNFG_09(0x12)
- 02-01 21:12:50.957 0 0 I sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (4328), data(0x0000)
- 02-01 21:12:50.984 0 0 I sec-battery battery.94: sec_bat_get_temperature_by_adc: Temp(351), Temp-ADC(31797)
- 02-01 21:12:50.984 0 0 I sec-battery battery.94: sec_bat_get_temperature_by_adc: Temp(292), Temp-ADC(33000)
- 02-01 21:12:50.985 0 0 I sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (4328), data(0x0000)
- 02-01 21:12:50.985 0 0 I sec-fuelgauge 19-0036: sec_fg_get_scaled_capacity: scaled capacity (44.9)
- 02-01 21:12:50.985 0 0 I sec-battery battery.94: sec_bat_get_battery_info:Vnow(3821mV),Inow(450mA),Imax(460mA),SOC(44%),Tbat(351),is_hc_usb(0)
- 02-01 21:12:50.985 0 0 I sec_bat_check_callback: battery->pdata->bat_irq_gpio(407)
- 02-01 21:12:50.985 0 0 I sec_bat_check_callback: Battery status(1)
- 02-01 21:12:50.985 0 0 I sec-battery battery.94: sec_bat_battery_cable_check: Battery Connected
- 02-01 21:12:50.986 0 0 I max77803_get_health_state: reg_data(0x3)
- 02-01 21:12:50.988 0 0 I max77803_get_health_state: vbus_state : 0x3, chg_dtls : 0x1
- 02-01 21:12:50.988 0 0 I sec-battery battery.94: sec_bat_time_management: Charging Time : 32 secs
- 02-01 21:12:50.988 0 0 I sec-battery battery.94: sec_bat_temperature: HLT(2000) HLR(2000) HT(600), HR(400), LT(-50), LR(0)
- 02-01 21:12:50.988 0 0 I sec-battery battery.94: sec_bat_fullcharged_check: Charging Mode : Normal
- 02-01 21:12:50.988 0 0 I sec-battery battery.94: sec_bat_monitor_work: Status(Charging), Mode(Normal), Health(Good), Cable(4), Vendor(SDI SDI), level(100%)
- 02-01 21:12:52.769 0 0 I msm_thermal: msm_therm_temp_log Debug Temp for Sensor:
- 02-01 21:12:57.779 0 0 I msm_thermal: msm_therm_temp_log (0 --- 49)(1 --- 49)(2 --- 47)(3 --- 49)(4 --- 49)(5 --- 50)(6 --- 50)(7 --- 49)(8 --- 50)(9 --- 48)(10 --- 48)
- 02-01 21:12:57.779 0 0 I msm_thermal: msm_therm_temp_log Debug Temp for Sensor:
- 02-01 21:13:00.639 0 0 I msm_thermal: msm_therm_temp_log (0 --- 49)(1 --- 49)(2 --- 47)(3 --- 49)(4 --- 49)(5 --- 50)(6 --- 50)(7 --- 49)(8 --- 50)(9 --- 49)(10 --- 48)
- 02-01 21:13:00.639 0 0 I [SSP] : debug_work_func(1) - Sensor state: 0x3ffff, RC: 0, MS: 0 Santi: 0 Dump: 0
- 02-01 21:13:00.647 0 0 I : [SSP] Sensor Posision A : 6, G : 6, M: 3
- 02-01 21:13:01.030 0 0 I max77803_get_input_current: CHG_CNFG_09(0x12)
- 02-01 21:13:01.030 0 0 I max77803_get_input_current: CHG_CNFG_09(0x12)
- 02-01 21:13:01.032 0 0 I sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (4328), data(0x0000)
- 02-01 21:13:01.058 0 0 I sec-battery battery.94: sec_bat_get_temperature_by_adc: Temp(351), Temp-ADC(31796)
- 02-01 21:13:01.059 0 0 I sec-battery battery.94: sec_bat_get_temperature_by_adc: Temp(292), Temp-ADC(33000)
- 02-01 21:13:01.060 0 0 I sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (4328), data(0x0000)
- 02-01 21:13:01.060 0 0 I sec-fuelgauge 19-0036: sec_fg_get_scaled_capacity: scaled capacity (44.9)
- 02-01 21:13:01.060 0 0 I sec-battery battery.94: sec_bat_get_battery_info:Vnow(3821mV),Inow(450mA),Imax(460mA),SOC(44%),Tbat(351),is_hc_usb(0)
- 02-01 21:13:01.060 0 0 I sec_bat_check_callback: battery->pdata->bat_irq_gpio(407)
- 02-01 21:13:01.060 0 0 I sec_bat_check_callback: Battery status(1)
- 02-01 21:13:01.060 0 0 I sec-battery battery.94: sec_bat_battery_cable_check: Battery Connected
- 02-01 21:13:01.061 0 0 I max77803_get_health_state: reg_data(0x3)
- 02-01 21:13:01.062 0 0 I max77803_get_health_state: vbus_state : 0x3, chg_dtls : 0x1
- 02-01 21:13:01.062 0 0 I sec-battery battery.94: sec_bat_monitor_work: Status(Charging), Mode(Normal), Health(Good), Cable(4), Vendor(SDI SDI), level(100%)
- 02-01 21:13:02.789 0 0 I msm_thermal: msm_therm_temp_log Debug Temp for Sensor:
- 02-01 21:13:07.799 0 0 I msm_thermal: msm_therm_temp_log (0 --- 49)(1 --- 49)(2 --- 47)(3 --- 49)(4 --- 49)(5 --- 50)(6 --- 50)(7 --- 49)(8 --- 50)(9 --- 49)(10 --- 48)
- 02-01 21:13:07.799 0 0 I msm_thermal: msm_therm_temp_log Debug Temp for Sensor:
- 02-01 21:13:11.075 0 0 I msm_thermal: msm_therm_temp_log (0 --- 49)(1 --- 49)(2 --- 47)(3 --- 49)(4 --- 49)(5 --- 50)(6 --- 50)(7 --- 49)(8 --- 50)(9 --- 49)(10 --- 48)
- 02-01 21:13:11.075 0 0 I max77803_get_input_current: CHG_CNFG_09(0x12)
- 02-01 21:13:11.076 0 0 I max77803_get_input_current: CHG_CNFG_09(0x12)
- 02-01 21:13:11.077 0 0 I sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (4328), data(0x0000)
- 02-01 21:13:11.104 0 0 I sec-battery battery.94: sec_bat_get_temperature_by_adc: Temp(351), Temp-ADC(31795)
- 02-01 21:13:11.104 0 0 I sec-battery battery.94: sec_bat_get_temperature_by_adc: Temp(292), Temp-ADC(33000)
- 02-01 21:13:11.105 0 0 I sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (4328), data(0x0000)
- 02-01 21:13:11.105 0 0 I sec-fuelgauge 19-0036: sec_fg_get_scaled_capacity: scaled capacity (44.9)
- 02-01 21:13:11.105 0 0 I sec-battery battery.94: sec_bat_get_battery_info:Vnow(3821mV),Inow(450mA),Imax(460mA),SOC(44%),Tbat(351),is_hc_usb(0)
- 02-01 21:13:11.105 0 0 I sec_bat_check_callback: battery->pdata->bat_irq_gpio(407)
- 02-01 21:13:11.105 0 0 I sec_bat_check_callback: Battery status(1)
- 02-01 21:13:11.105 0 0 I sec-battery battery.94: sec_bat_battery_cable_check: Battery Connected
- 02-01 21:13:11.106 0 0 I max77803_get_health_state: reg_data(0x3)
- 02-01 21:13:11.108 0 0 I max77803_get_health_state: vbus_state : 0x3, chg_dtls : 0x1
- 02-01 21:13:11.108 0 0 I sec-battery battery.94: sec_bat_monitor_work: Status(Charging), Mode(Normal), Health(Good), Cable(4), Vendor(SDI SDI), level(100%)
- 02-01 21:13:11.639 0 0 I [SSP] : debug_work_func(1) - Sensor state: 0x3ffff, RC: 0, MS: 0 Santi: 0 Dump: 0
- 02-01 21:13:11.647 0 0 I : [SSP] Sensor Posision A : 6, G : 6, M: 3
- 02-01 21:13:12.809 0 0 I msm_thermal: msm_therm_temp_log Debug Temp for Sensor:
- 02-01 21:13:16.203 0 0 I msm_thermal: msm_therm_temp_log (0 --- 49)(1 --- 49)(2 --- 48)(3 --- 49)(4 --- 49)(5 --- 50)(6 --- 50)(7 --- 50)(8 --- 50)(9 --- 49)(10 --- 48)
- 02-01 21:13:16.203 0 0 E : reading MSM_THERM_CH [rc = 0] [adc_code = 30187]
- 02-01 21:13:16.229 0 0 I sec-thermistor: sec_therm_polling_work: adc=30186
- 02-01 21:13:16.229 0 0 I sec-thermistor: sec_therm_polling_work: temper=441
- 02-01 21:13:16.234 0 0 E : reading LR_MUX9_PU2_AMUX_THM5 [rc = 0] [adc_code = 30614]
- 02-01 21:13:16.238 0 0 E : reading LR_MUX9_PU2_AMUX_THM5 [rc = 0] [adc_code = 30614]
- 02-01 21:13:16.243 0 0 E : reading LR_MUX9_PU2_AMUX_THM5 [rc = 0] [adc_code = 30614]
- 02-01 21:13:16.247 0 0 E : reading LR_MUX9_PU2_AMUX_THM5 [rc = 0] [adc_code = 30615]
- 02-01 21:13:16.251 0 0 E : reading LR_MUX9_PU2_AMUX_THM5 [rc = 0] [adc_code = 30614]
- 02-01 21:13:16.256 0 0 E : reading LR_MUX9_PU2_AMUX_THM5 [rc = 0] [adc_code = 30613]
- 02-01 21:13:16.260 0 0 E : reading LR_MUX9_PU2_AMUX_THM5 [rc = 0] [adc_code = 30614]
- 02-01 21:13:16.260 0 0 I sec-thermistor: sec_therm_polling_work: adc_flash=30614
- 02-01 21:13:16.260 0 0 I sec-thermistor: sec_therm_polling_work: temper_flash=419
- 02-01 21:13:16.260 0 0 I sec-thermistor: notify_change_of_temperature: siop_level=-1
- 02-01 21:13:16.260 0 0 I sec-thermistor: notify_change_of_temperature: uevent: SUBTEMPERATURE=441
- 02-01 21:13:17.819 0 0 I msm_thermal: msm_therm_temp_log Debug Temp for Sensor:
- 02-01 21:13:20.679 0 0 I msm_thermal: msm_therm_temp_log (0 --- 49)(1 --- 49)(2 --- 47)(3 --- 49)(4 --- 49)(5 --- 50)(6 --- 50)(7 --- 50)(8 --- 50)(9 --- 49)(10 --- 48)
- 02-01 21:13:20.679 0 0 E pil-q6v5-lpass fe200000.qcom,lpass: adsp: Failed to locate adsp.mdt
- 02-01 21:13:20.679 0 0 E adsp_state_notifier_fn: sysmon_send_event failed (-19).
- 02-01 21:13:20.679 0 0 E AO-Notify: Generel: 5
- 02-01 21:13:20.679 0 0 E L-Notify: Generel: 5
- 02-01 21:13:20.679 0 0 E adsp-loader qcom,msm-adsp-loader.45: adsp_loader_do: pil get failed,
- 02-01 21:13:20.679 0 0 E adsp-loader qcom,msm-adsp-loader.45: adsp_loader_do: Q6/ADSP image loading failed
- 02-01 21:13:20.680 0 0 I init : write_file: Unable to open '/sys/class/android_usb/android0/f_ffs/aliases': No such file or directory
- 02-01 21:13:20.681 0 0 I init : Starting service 'logd'...
- 02-01 21:13:20.699 266 274 I auditd : type=1305 audit(0.0:12): audit_pid=266 old=0 auid=4294967295 ses=4294967295 subj=u:r:logd:s0 res=1
- 02-01 21:13:20.699 274 274 W auditd : type=1305 audit(0.0:12): audit_pid=266 old=0 auid=4294967295 ses=4294967295 subj=u:r:logd:s0 res=1
- 02-01 21:13:20.699 266 274 I auditd : type=1305 audit(0.0:13): audit_rate_limit=20 old=0 auid=4294967295 ses=4294967295 subj=u:r:logd:s0 res=1
- 02-01 21:13:20.699 274 274 W auditd : type=1305 audit(0.0:13): audit_rate_limit=20 old=0 auid=4294967295 ses=4294967295 subj=u:r:logd:s0 res=1
- 02-01 21:13:20.702 0 0 I init : (Loading properties from /system/build.prop took 0.01s.)
- 02-01 21:13:20.702 0 0 I init : (Loading properties from /vendor/build.prop took 0.00s.)
- 02-01 21:13:20.702 0 0 I init : (Loading properties from /factory/factory.prop took 0.00s.)
- 02-01 21:13:20.707 0 0 I init : Starting service 'vold'...
- 02-01 21:13:20.709 0 0 I init : Not bootcharting.
- 02-01 21:13:20.710 0 0 I logd.auditd: start
- 02-01 21:13:20.721 0 0 I vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- 02-01 21:13:20.721 0 0 I fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
- 02-01 21:13:20.721 0 0 I .text : 0xc0008000 - 0xc1077c10 (16832 kB)
- 02-01 21:13:20.721 0 0 I .init : 0xc1100000 - 0xc120ee40 (1084 kB)
- 02-01 21:13:20.721 0 0 I .data : 0xc1210000 - 0xc1298750 ( 546 kB)
- 02-01 21:13:20.721 0 0 I .bss : 0xc134b580 - 0xc14df894 (1617 kB)
- 02-01 21:13:20.722 0 0 I : accessory_chip=0, hw_plat_subtype=0, pmic_model=65537, pmic_die_revision=196609
- 02-01 21:13:20.745 0 0 I : [BT]
- 02-01 21:13:20.745 0 0 I : [BT]
- 02-01 21:13:20.748 0 0 I repeated_fuelalert: 0
- 02-01 21:13:20.749 0 0 I : #####################################################
- 02-01 21:13:20.752 0 0 I cable_source_type: 1, use_wireless_to_pogo : 0, event_waiting_time : 600
- 02-01 21:13:20.752 0 0 I polling_type: 1, initial_count : 3, check_count : 0
- 02-01 21:13:20.752 0 0 I check_adc_max: 1440, check_adc_min : 0
- 02-01 21:13:20.752 0 0 I ovp_uvlo_check_type: 3, thermal_source : 2
- 02-01 21:13:20.752 0 0 I temp_check_type: 2, temp_check_count : 1
- 02-01 21:13:20.755 0 0 I : Compiled in drivers/net/wireless/bcmdhd on Jul 9 2017 at 08:45:30
- 02-01 21:13:20.762 0 0 I : Gyro Temp Init
- 02-01 21:13:20.762 0 0 I : CheckLightLux Init
- 02-01 21:13:20.762 0 0 I [INVN]ACCEL_MGMT2: 63
- 02-01 21:13:20.762 0 0 I : =>GEP
- 02-01 21:13:20.762 0 0 I : =>PRP
- 02-01 21:13:20.762 0 0 I : =>LIGP
- 02-01 21:13:20.762 0 0 I : =>PRP
- 02-01 21:13:20.762 0 0 I : AD 8 1 0 1, 500
- 02-01 21:13:20.762 0 0 I : g_ptSh->cTimer = 500
- 02-01 21:13:20.762 0 0 I : SetRTC = 500
- 02-01 21:13:20.770 266 274 I auditd : type=2
- 02-01 21:13:20.770 274 274 W auditd : type=2
- 02-01 21:13:20.773 0 0 W : type=2
- --------- beginning of system
- 02-01 21:13:20.814 267 267 I vold : Vold 3.0 (the awakening) firing up
- 02-01 21:13:20.814 267 267 V vold : Detected support for: ext4 f2fs vfat
- 02-01 21:13:20.941 0 0 I init : Starting service 'exec 0 (/system/bin/tzdatacheck)'...
- 02-01 21:13:20.950 276 276 I /system/bin/tzdatacheck: tzdata file /data/misc/zoneinfo/current/tzdata does not exist. No action required.
- 02-01 21:13:20.951 267 275 V vold : /system/bin/sgdisk
- 02-01 21:13:20.951 267 275 V vold : --android-dump
- 02-01 21:13:20.951 267 275 V vold : /dev/block/vold/disk:179,64
- 02-01 21:13:20.954 0 0 I init : Service 'exec 0 (/system/bin/tzdatacheck)' (pid 276) exited with status 0
- 02-01 21:13:20.956 0 0 E init : SELinux: Could not get canonical path /efs/sdrm/data_agent restorecon: No such file or directory.
- 02-01 21:13:20.956 0 0 E init : SELinux: Could not get canonical path /efs/prox_cal restorecon: No such file or directory.
- 02-01 21:13:20.956 0 0 E init : SELinux: Could not get canonical path /efs/mps_code.dat restorecon: No such file or directory.
- 02-01 21:13:20.964 0 0 E init : cannot find 'icd_check', disabling 'exec 1 (icd_check)'
- 02-01 21:13:20.978 267 275 V vold : DISK mbr
- 02-01 21:13:20.978 267 275 W vold : disk:179,64 has unknown partition table; trying entire device
- 02-01 21:13:20.978 267 275 V vold : /system/bin/blkid
- 02-01 21:13:20.978 267 275 V vold : -c
- 02-01 21:13:20.978 267 275 V vold : /dev/null
- 02-01 21:13:20.979 267 275 V vold : -s
- 02-01 21:13:20.979 267 275 V vold : TYPE
- 02-01 21:13:20.979 267 275 V vold : -s
- 02-01 21:13:20.979 267 275 V vold : UUID
- 02-01 21:13:20.979 267 275 V vold : -s
- 02-01 21:13:20.979 267 275 V vold : LABEL
- 02-01 21:13:20.979 267 275 V vold : /dev/block/vold/disk:179,64
- 02-01 21:13:21.006 267 275 E vold : Failed to pclose /system/bin/blkid -c /dev/null -s TYPE -s UUID -s LABEL /dev/block/vold/disk:179,64 : Success
- 02-01 21:13:21.097 0 0 E init : Warning! Service exec 2 (/sbin/launch_daemonsu.sh) needs a SELinux domain defined; please fix!
- 02-01 21:13:21.097 0 0 I init : Starting service 'exec 2 (/sbin/launch_daemonsu.sh)'...
- 02-01 21:13:21.115 0 0 I max77803_get_input_current: CHG_CNFG_09(0x12)
- 02-01 21:13:21.115 0 0 I max77803_get_input_current: CHG_CNFG_09(0x12)
- 02-01 21:13:21.117 0 0 I sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (4328), data(0x0000)
- 02-01 21:13:21.122 282 282 I launch_daemonsu: (post-fs-data) start
- 02-01 21:13:21.149 0 0 I sec-battery battery.94: sec_bat_get_temperature_by_adc: Temp(351), Temp-ADC(31793)
- 02-01 21:13:21.150 0 0 I sec-battery battery.94: sec_bat_get_temperature_by_adc: Temp(292), Temp-ADC(33000)
- 02-01 21:13:21.151 0 0 I sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (4328), data(0x0000)
- 02-01 21:13:21.151 0 0 I sec-fuelgauge 19-0036: sec_fg_get_scaled_capacity: scaled capacity (44.9)
- 02-01 21:13:21.151 0 0 I sec-battery battery.94: sec_bat_get_battery_info:Vnow(3773mV),Inow(450mA),Imax(460mA),SOC(44%),Tbat(351),is_hc_usb(0)
- 02-01 21:13:21.151 0 0 I sec_bat_check_callback: battery->pdata->bat_irq_gpio(407)
- 02-01 21:13:21.151 0 0 I sec_bat_check_callback: Battery status(1)
- 02-01 21:13:21.151 0 0 I sec-battery battery.94: sec_bat_battery_cable_check: Battery Connected
- 02-01 21:13:21.152 0 0 I max77803_get_health_state: reg_data(0x3)
- 02-01 21:13:21.153 0 0 I max77803_get_health_state: vbus_state : 0x3, chg_dtls : 0x1
- 02-01 21:13:21.153 0 0 I sec-battery battery.94: sec_bat_time_management: Charging Time : 62 secs
- 02-01 21:13:21.153 0 0 I sec-battery battery.94: sec_bat_temperature: HLT(2000) HLR(2000) HT(600), HR(400), LT(-50), LR(0)
- 02-01 21:13:21.153 0 0 I sec-battery battery.94: sec_bat_fullcharged_check: Charging Mode : Normal
- 02-01 21:13:21.153 0 0 I sec-battery battery.94: sec_bat_monitor_work: Status(Charging), Mode(Normal), Health(Good), Cable(4), Vendor(SDI SDI), level(100%)
- 02-01 21:13:21.185 294 294 I launch_daemonsu: (post-fs-data) /su not mounted yet
- 02-01 21:13:21.195 295 295 I launch_daemonsu: (post-fs-data) copying boot image backups from /cache to /data
- 02-01 21:13:21.361 321 321 I launch_daemonsu: (post-fs-data) loopsetup(/data/su.img):
- 02-01 21:13:22.402 329 329 I launch_daemonsu: (post-fs-data) abort: mount failed
- 02-01 21:13:22.406 0 0 I init : Service 'exec 2 (/sbin/launch_daemonsu.sh)' (pid 281) exited with status 0
- 02-01 21:13:22.406 0 0 I init : Starting service 'exec 3 (/sbin/launch_daemonsu.sh)'...
- 02-01 21:13:22.421 331 331 I launch_daemonsu: (post-fs-data) start
- 02-01 21:13:22.476 343 343 I launch_daemonsu: (post-fs-data) /su not mounted yet
- 02-01 21:13:22.486 344 344 I launch_daemonsu: (post-fs-data) copying boot image backups from /cache to /data
- 02-01 21:13:22.639 0 0 I [SSP] : debug_work_func(1) - Sensor state: 0x3ffff, RC: 0, MS: 0 Santi: 0 Dump: 0
- 02-01 21:13:22.647 0 0 I : [SSP] Sensor Posision A : 6, G : 6, M: 3
- 02-01 21:13:22.659 370 370 I launch_daemonsu: (post-fs-data) loopsetup(/data/su.img):
- 02-01 21:13:22.829 0 0 I msm_thermal: msm_therm_temp_log Debug Temp for Sensor:
- 02-01 21:13:23.700 378 378 I launch_daemonsu: (post-fs-data) abort: mount failed
- 02-01 21:13:23.705 0 0 I msm_thermal: msm_therm_temp_log (0 --- 54)(1 --- 51)(2 --- 48)(3 --- 50)(4 --- 52)(5 --- 60)(6 --- 56)(7 --- 53)(8 --- 53)(9 --- 50)(10 --- 48)
- 02-01 21:13:23.705 0 0 I init : Service 'exec 3 (/sbin/launch_daemonsu.sh)' (pid 330) exited with status 0
- 02-01 21:13:23.709 0 0 E init : cannot find '/system/bin/sysinit', disabling 'sysinit'
- 02-01 21:13:23.709 0 0 I init : (Loading properties from /data/local.prop took 0.00s.)
- 02-01 21:13:23.709 0 0 I init : Starting service 'logd-reinit'...
- 02-01 21:13:23.712 0 0 I init : Starting service 'healthd'...
- 02-01 21:13:23.713 0 0 I init : Starting service 'lmkd'...
- 02-01 21:13:23.713 0 0 I init : Starting service 'servicemanager'...
- 02-01 21:13:23.714 0 0 I init : Starting service 'surfaceflinger'...
- 02-01 21:13:23.714 0 0 E init : Warning! Service thermal-engine needs a SELinux domain defined; please fix!
- 02-01 21:13:23.714 0 0 I init : Starting service 'thermal-engine'...
- 02-01 21:13:23.715 0 0 E init : Warning! Service rfs_access needs a SELinux domain defined; please fix!
- 02-01 21:13:23.715 0 0 I init : Starting service 'rfs_access'...
- 02-01 21:13:23.724 0 0 I logd.daemon: reinit
- 02-01 21:13:23.725 0 0 I init : Service 'logd-reinit' (pid 379) exited with status 0
- 02-01 21:13:23.726 0 0 I : home_key wakeup status 1
- 02-01 21:13:23.726 0 0 I : volume_down wakeup status 0
- 02-01 21:13:23.726 0 0 I : volume_up wakeup status 0
- 02-01 21:13:23.730 0 0 E init : property_set("ro.telephony.call_ring.multiple", "false") failed
- 02-01 21:13:23.731 381 381 I lowmemorykiller: Using in-kernel low memory killer interface
- 02-01 21:13:23.731 0 0 I init : write_file: Unable to open '/sys/module/lowmemorykiller/parameters/enable_adaptive_lmk': No such file or directory
- 02-01 21:13:23.731 0 0 I init : write_file: Unable to open '/sys/module/lowmemorykiller/parameters/vmpressure_file_min': No such file or directory
- 02-01 21:13:23.733 385 385 I rfs_access: Initialized RFS server
- 02-01 21:13:23.734 0 0 E init : SELinux: Could not get canonical path /sys/block/sda/queue/scheduler restorecon: No such file or directory.
- 02-01 21:13:23.734 0 0 E init : SELinux: Could not get canonical path /sys/block/sde/queue/scheduler restorecon: No such file or directory.
- 02-01 21:13:23.734 0 0 E init : SELinux: Could not get canonical path /sys/block/dm-0/queue/scheduler restorecon: No such file or directory.
- 02-01 21:13:23.736 0 0 E init : service 'console' requires console
- 02-01 21:13:23.736 0 0 E init : Warning! Service rmt_storage needs a SELinux domain defined; please fix!
- 02-01 21:13:23.736 0 0 I init : Starting service 'rmt_storage'...
- 02-01 21:13:23.737 0 0 I init : Starting service 'netd'...
- 02-01 21:13:23.738 0 0 E pil-q6v5-mss fc880000.qcom,mss: mba: Failed to locate mba.mdt
- 02-01 21:13:23.738 0 0 E modem_notifier_cb: sysmon_send_event error -19
- 02-01 21:13:23.738 0 0 E M-Notify: General: 5
- 02-01 21:13:23.738 0 0 E msm_ipc_load_default_node: Failed to load modem
- 02-01 21:13:23.738 0 0 I init : Starting service 'debuggerd'...
- 02-01 21:13:23.739 0 0 E init : cannot find '/system/bin/debuggerd64', disabling 'debuggerd64'
- 02-01 21:13:23.739 0 0 I init : Starting service 'ril-daemon'...
- 02-01 21:13:23.740 0 0 I init : Starting service 'drm'...
- 02-01 21:13:23.740 0 0 I init : Starting service 'media'...
- 02-01 21:13:23.741 0 0 I init : Starting service 'installd'...
- 02-01 21:13:23.742 0 0 I init : Starting service 'keystore'...
- 02-01 21:13:23.742 0 0 I init : Starting service 'logcat_debug'...
- 02-01 21:13:23.743 0 0 E init : Warning! Service qmuxd needs a SELinux domain defined; please fix!
- 02-01 21:13:23.743 0 0 I init : Starting service 'qmuxd'...
- 02-01 21:13:23.743 0 0 E init : Warning! Service irsc_util needs a SELinux domain defined; please fix!
- 02-01 21:13:23.743 0 0 I init : Starting service 'irsc_util'...
- 02-01 21:13:23.744 0 0 E init : Warning! Service qcamerasvr needs a SELinux domain defined; please fix!
- 02-01 21:13:23.744 0 0 I init : Starting service 'qcamerasvr'...
- 02-01 21:13:23.744 0 0 E init : Warning! Service adsprpcd needs a SELinux domain defined; please fix!
- 02-01 21:13:23.744 0 0 I init : Starting service 'adsprpcd'...
- 02-01 21:13:23.745 0 0 I init : Starting service 'zygote'...
- 02-01 21:13:23.746 0 0 I init : Starting service 'gatekeeperd'...
- 02-01 21:13:23.759 396 396 I auditd : type=1400 audit(0.0:14): avc: denied { write } for comm="logcat" name="/" dev="mmcblk0p25" ino=2 scontext=u:r:logd:s0 tcontext=u:object_r:system_data_file:s0 tclass=dir permissive=1
- 02-01 21:13:23.759 396 396 I logcat : type=1400 audit(0.0:14): avc: denied { write } for name="/" dev="mmcblk0p25" ino=2 scontext=u:r:logd:s0 tcontext=u:object_r:system_data_file:s0 tclass=dir permissive=1
- 02-01 21:13:23.759 396 396 I auditd : type=1400 audit(0.0:14): avc: denied { add_name } for comm="logcat" name="logcat.txt" scontext=u:r:logd:s0 tcontext=u:object_r:system_data_file:s0 tclass=dir permissive=1
- 02-01 21:13:23.759 396 396 I logcat : type=1400 audit(0.0:14): avc: denied { add_name } for name="logcat.txt" scontext=u:r:logd:s0 tcontext=u:object_r:system_data_file:s0 tclass=dir permissive=1
- 02-01 21:13:23.759 396 396 I auditd : type=1400 audit(0.0:14): avc: denied { create } for comm="logcat" name="logcat.txt" scontext=u:r:logd:s0 tcontext=u:object_r:system_data_file:s0 tclass=file permissive=1
- 02-01 21:13:23.759 396 396 I logcat : type=1400 audit(0.0:14): avc: denied { create } for name="logcat.txt" scontext=u:r:logd:s0 tcontext=u:object_r:system_data_file:s0 tclass=file permissive=1
- 02-01 21:13:23.759 396 396 I auditd : type=1400 audit(0.0:14): avc: denied { append } for comm="logcat" name="logcat.txt" dev="mmcblk0p25" ino=15 scontext=u:r:logd:s0 tcontext=u:object_r:system_data_file:s0 tclass=file permissive=1
- 02-01 21:13:23.759 396 396 I logcat : type=1400 audit(0.0:14): avc: denied { append } for name="logcat.txt" dev="mmcblk0p25" ino=15 scontext=u:r:logd:s0 tcontext=u:object_r:system_data_file:s0 tclass=file permissive=1
- 02-01 21:13:23.759 396 396 I auditd : type=1300 audit(0.0:14): arch=40000028 syscall=322 per=800008 success=yes exit=5 a0=ffffff9c a1=bec06bb7 a2=20441 a3=180 items=2 ppid=1 ppcomm=init auid=4294967295 uid=0 gid=1000 euid=0 suid=0 fsuid=0 egid=1000 sgid=1000 fsgid=1000 tty=(none) ses=4294967295 comm="logcat" exe="/system/bin/logcat" subj=u:r:logd:s0 key=(null)
- 02-01 21:13:23.759 396 396 W logcat : type=1300 audit(0.0:14): arch=40000028 syscall=322 per=800008 success=yes exit=5 a0=ffffff9c a1=bec06bb7 a2=20441 a3=180 items=2 ppid=1 ppcomm=init auid=4294967295 uid=0 gid=1000 euid=0 suid=0 fsuid=0 egid=1000 sgid=1000 fsgid=1000 tty=(none) ses=4294967295 exe="/system/bin/logcat" subj=u:r:logd:s0 key=(null)
- 02-01 21:13:23.763 0 0 I init : Starting service 'perfprofd'...
- 02-01 21:13:23.763 0 0 E init : cannot find '/system/bin/macloader', disabling 'macloader'
- 02-01 21:13:23.764 0 0 E init : Warning! Service qseecomd needs a SELinux domain defined; please fix!
- 02-01 21:13:23.764 0 0 I init : Starting service 'qseecomd'...
- 02-01 21:13:23.765 0 0 E init : Warning! Service time_daemon needs a SELinux domain defined; please fix!
- 02-01 21:13:23.765 0 0 I init : Starting service 'time_daemon'...
- 02-01 21:13:23.766 0 0 E init : cannot find '/system/bin/audiod', disabling 'audiod'
- 02-01 21:13:23.766 0 0 I init : Starting service 'daemonsu'...
- 02-01 21:13:23.766 387 387 I rmt_storage: No EBR found
- 02-01 21:13:23.766 387 387 I rmt_storage: Error (-1) parsing MBR partitions
- 02-01 21:13:23.766 387 387 I rmt_storage: Registering modemst1: 0x4a /boot/modem_fs1
- 02-01 21:13:23.766 387 387 I rmt_storage: Registering modemst2: 0x4b /boot/modem_fs2
- 02-01 21:13:23.766 0 0 I usb : enabled: 0, dev->enabled: 0
- 02-01 21:13:23.766 0 0 I dwc3 f9200000.dwc3: gadget android_usb data soft-disconnect
- 02-01 21:13:23.766 387 387 I rmt_storage: Registering fsg: 0x58 /boot/modem_fsg
- 02-01 21:13:23.759 266 274 I auditd : type=1307 audit(0.0:14): cwd="/"
- 02-01 21:13:23.759 274 274 W auditd : type=1307 audit(0.0:14): cwd="/"
- 02-01 21:13:23.759 266 274 I auditd : type=1302 audit(0.0:14): item=0 name="/data/" inode=2 dev=b3:19 mode=040771 ouid=1000 ogid=1000 rdev=00:00 obj=u:object_r:system_data_file:s0
- 02-01 21:13:23.759 274 274 W auditd : type=1302 audit(0.0:14): item=0 name="/data/" inode=2 dev=b3:19 mode=040771 ouid=1000 ogid=1000 rdev=00:00 obj=u:object_r:system_data_file:s0
- 02-01 21:13:23.759 266 274 I auditd : type=1302 audit(0.0:14): item=1 name="/data/logcat.txt" inode=15 dev=b3:19 mode=0100600 ouid=0 ogid=1000 rdev=00:00 obj=u:object_r:system_data_file:s0
- 02-01 21:13:23.759 274 274 W auditd : type=1302 audit(0.0:14): item=1 name="/data/logcat.txt" inode=15 dev=b3:19 mode=0100600 ouid=0 ogid=1000 rdev=00:00 obj=u:object_r:system_data_file:s0
- 02-01 21:13:23.759 266 274 I auditd : type=1320 audit(0.0:14):
- 02-01 21:13:23.759 274 274 W auditd : type=1320 audit(0.0:14):
- 02-01 21:13:23.766 387 387 I rmt_storage: Registering ssd: 0x5d ssd
- 02-01 21:13:23.767 387 387 I rmt_storage: Registering fsc: 0xff /boot/modem_fsc
- 02-01 21:13:23.767 387 387 I rmt_storage: 5 GPT partitions found
- 02-01 21:13:23.779 394 394 I installd: installd firing up
- 02-01 21:13:23.783 390 390 I : debuggerd: starting
- 02-01 21:13:23.793 400 400 E adsprpc : vendor/qcom/proprietary/adsprpc/src/fastrpc_apps_user.c:126:/dev/adsprpc-smd device initialization error: Operation not permitted
- 02-01 21:13:23.793 400 400 E adsprpc : vendor/qcom/proprietary/adsprpc/src/fastrpc_apps_user.c:179::error: -1: dev != -1
- 02-01 21:13:23.793 400 400 E adsprpc : vendor/qcom/proprietary/adsprpc/src/fastrpc_apps_user.c:224::error: -1: 0 == (nErr = remotectl_open(name, (int*)ph, dlerrstr, sizeof(dlerrstr), &dlerr))
- 02-01 21:13:23.793 400 400 E adsprpc : vendor/qcom/proprietary/adsprpc/src/fastrpc_apps_user.c:126:/dev/adsprpc-smd device initialization error: No such file or directory
- 02-01 21:13:23.793 400 400 E adsprpc : vendor/qcom/proprietary/adsprpc/src/fastrpc_apps_user.c:179::error: -1: dev != -1
- 02-01 21:13:23.793 400 400 E adsprpc : vendor/qcom/proprietary/adsprpc/src/adsprpcd.c:23::error: -1: 0 == adsp_default_listener_register()
- 02-01 21:13:23.793 400 400 E adsprpc : vendor/qcom/proprietary/adsprpc/src/adsprpcd.c:36:adsprpcd exiting nErr=-1
- 02-01 21:13:23.811 403 403 I perfprofd: starting Android Wide Profiling daemon
- 02-01 21:13:23.811 403 403 E perfprofd: unable to open configuration file /data/data/com.google.android.gms/files/perfprofd.conf
- 02-01 21:13:23.811 403 403 I perfprofd: random seed set to 2908633240
- 02-01 21:13:23.821 409 409 I launch_daemonsu: (service) start
- 02-01 21:13:23.787 0 0 E pil-q6v5-mss fc880000.qcom,mss: mba: Failed to locate mba.mdt
- 02-01 21:13:23.787 0 0 E modem_notifier_cb: sysmon_send_event error -19
- 02-01 21:13:23.787 0 0 E M-Notify: General: 5
- 02-01 21:13:23.787 0 0 E msm_ipc_load_default_node: Failed to load modem
- 02-01 21:13:23.788 0 0 I usb : enabled: 1, dev->enabled: 0
- 02-01 21:13:23.788 0 0 D usb : enable_store f_holder->f:mtp
- 02-01 21:13:23.788 0 0 D usb : enable_store f_holder->f:acm
- 02-01 21:13:23.788 0 0 D usb : acm is enabled. (bcdDevice=0x400)
- 02-01 21:13:23.788 0 0 D usb : enable_store f_holder->f:adb
- 02-01 21:13:23.788 0 0 D usb : enable_store vendor=4e8,product=6860,bcdDevice=400
- 02-01 21:13:23.788 0 0 D : ,Class=0,SubClass=0,Protocol=0
- 02-01 21:13:23.788 0 0 D usb : enable_store next cmd : usb_add_config
- 02-01 21:13:23.788 0 0 I init : Starting service 'adbd'...
- 02-01 21:13:23.797 0 0 I init : Service 'adsprpcd' (pid 400) exited with status 255
- 02-01 21:13:23.797 0 0 I init : Service 'adsprpcd' (pid 400) killing any children in process group
- 02-01 21:13:23.803 0 0 I : adb_open
- 02-01 21:13:23.803 0 0 I : DUN is registerd
- 02-01 21:13:23.803 0 0 I dwc3 f9200000.dwc3: gadget android_usb data soft-connect
- 02-01 21:13:23.831 0 0 I init : Service 'ril-daemon' (pid 391) exited with status 1
- 02-01 21:13:23.831 0 0 I init : Service 'ril-daemon' (pid 391) killing any children in process group
- 02-01 21:13:23.831 0 0 I init : Service 'irsc_util' (pid 398) exited with status 0
- --------- beginning of crash
- 02-01 21:13:23.827 391 391 F libc : page record for 0xb6f6502c was not found (block_size=16)
- 02-01 21:13:23.830 404 404 D QSEECOMD: : qseecom listener services process entry PPID = 1
- 02-01 21:13:23.830 404 404 E QSEECOMD: : Listener: index = 0, hierarchy = 0
- 02-01 21:13:23.834 402 402 I gatekeeperd: Starting gatekeeperd...
- 02-01 21:13:23.844 389 389 I Netd : Netd 1.0 starting
- 02-01 21:13:23.844 389 389 D TetherController: Setting IP forward enable = 0
- 02-01 21:13:23.847 402 402 W gatekeeperd: falling back to software GateKeeper
- 02-01 21:13:23.850 384 384 I ThermalEngine: Thermal daemon started
- 02-01 21:13:23.850 384 384 I ThermalEngine: devices_manager_init: Init
- 02-01 21:13:23.850 384 384 I ThermalEngine: Number of gpus :1
- 02-01 21:13:23.850 384 384 I Thermal-IOCTL: KTM IOCTL interface "/dev/msm_thermal_query" opened
- 02-01 21:13:23.855 0 0 E healthd : wakealarm_init: timerfd_create failed
- 02-01 21:13:23.857 0 0 I sec-battery battery.94: sec_pogo_get_property: pogo charger is online (0)
- 02-01 21:13:23.857 0 0 I sec_chg_get_property: reg_data(93)
- 02-01 21:13:23.858 0 0 W healthd : sec-charger: Unknown power supply type
- 02-01 21:13:23.860 0 0 E pil-q6v5-mss fc880000.qcom,mss: mba: Failed to locate mba.mdt
- 02-01 21:13:23.860 0 0 E modem_notifier_cb: sysmon_send_event error -19
- 02-01 21:13:23.860 0 0 E M-Notify: General: 5
- 02-01 21:13:23.860 0 0 E msm_ipc_load_default_node: Failed to load modem
- 02-01 21:13:23.851 384 384 I ThermalEngine: vdd_rstr_init: Init KTM VDD RSTR enabled: 0
- 02-01 21:13:23.851 384 384 I ThermalEngine: sensors_manager_init: Init
- 02-01 21:13:23.852 404 404 D QSEECOMD: : Init dlopen(librpmb.so, RTLD_NOW) succeeds
- 02-01 21:13:23.852 404 404 D QSEECOMD: : Init::Init dlsym(g_FSHandle rpmb_init_service) succeeds
- 02-01 21:13:23.853 404 404 I rpmb : RPMB Mult = 2048, Rel_sec_cnt = 16
- 02-01 21:13:23.853 404 404 E DrmLibRpmb: rpmb_init succeeded! with ret = 0
- 02-01 21:13:23.853 404 404 D QSEECOMD: : Init rpmb_init_service ret = 0
- 02-01 21:13:23.853 404 404 D QSEECOMD: : RPMB system services: init (Listener ID = 8192)
- 02-01 21:13:23.853 404 404 E QSEECOMD: : Listener: index = 1, hierarchy = 0
- 02-01 21:13:23.856 405 405 D QC-time-services: File exist: /data/time/time_log.1
- 02-01 21:13:23.856 405 405 D QC-time-services: File size : /data/time/time_log.1, 783
- 02-01 21:13:23.856 405 405 D QC-time-services: picked File to save : /data/time/time_log.1
- 02-01 21:13:23.856 405 405 D QC-time-services: picked File to removed : /data/time/time_log.2
- --------- beginning of radio
- 02-01 21:13:23.858 384 418 E use-Rlog/RLOG-RIL-QMI: qmi_client [384]: unable to connect to server, errno=[2:No such file or directory], attempt=1
- 02-01 21:13:23.866 395 395 I keystore: Found keymaster0 module Keymaster QCOM HAL, version 3
- 02-01 21:13:23.867 395 395 I SoftKeymaster: system/keymaster/soft_keymaster_device.cpp, Line 122: Creating device
- 02-01 21:13:23.867 395 395 D SoftKeymaster: system/keymaster/soft_keymaster_device.cpp, Line 123: Device address: 0xb6ba4000
- 02-01 21:13:23.867 395 395 D QSEECOMAPI: : QSEECom_get_handle sb_length = 0x2000
- 02-01 21:13:23.867 395 395 D QSEECOMAPI: : App is not loaded in QSEE
- 02-01 21:13:23.867 395 395 E QSEECOMAPI: : Error::Cannot open the file /vendor/firmware/keymaster/keymaster.mdt
- 02-01 21:13:23.867 395 395 E QSEECOMAPI: : Error::Loading image failed with ret = -1
- 02-01 21:13:23.867 395 395 E QCOMKeyMaster: Loading keymaster app failed
- 02-01 21:13:23.867 395 395 E keystore: Error opening keystore keymaster0 device.
- 02-01 21:13:23.867 395 395 E keystore: keystore keymaster could not be initialized; exiting
- 02-01 21:13:23.872 0 0 I init : Service 'keystore' (pid 395) exited with status 1
- 02-01 21:13:23.872 0 0 I init : Service 'keystore' (pid 395) killing any children in process group
- 02-01 21:13:23.875 397 397 E use-Rlog/RLOG-RIL-QMI: qmuxd: linux_qmi_read_sysfs_config: couldn't open file /sys/module/f_rmnet/parameters/rmnet_ctl_ch
- 02-01 21:13:23.875 397 397 E use-Rlog/RLOG-RIL-QMI: qmuxd: linux_qmi_read_sysfs_config: couldn't open /sys/module/rmnet/parameters/rmnet_ctl_ch
- 02-01 21:13:23.875 397 397 E use-Rlog/RLOG-RIL-QMI: linux_qmi_qmux_if_configure_port_timeout: mode=0, smd_timeout=20, hsic_timeout=60
- 02-01 21:13:23.875 397 397 E use-Rlog/RLOG-RIL-QMI: linux_qmi_qmux_if_configure_port_timeout: failed to open HSIC timeout config=/sys/devices/virtual/hsicctl/hsicctl0/modem_wait errno [2:No such file or directory]
- 02-01 21:13:23.878 0 0 I warning : `qmuxd' uses 32-bit capabilities (legacy support in use)
- 02-01 21:13:23.875 384 384 E ThermalEngine: bcl_setup: Error opening /sys/devices/qcom,bcl.76/iavail
- 02-01 21:13:23.875 384 384 E ThermalEngine: add_tgt_sensors_set: Error adding bcl
- 02-01 21:13:23.875 384 384 E ThermalEngine: sensors_init: Error adding BCL TS
- 02-01 21:13:23.875 384 384 I ThermalEngine: Using target config file '/system/etc/thermal-engine-8974.conf'
- 02-01 21:13:23.875 384 384 E ThermalEngine: Error getting default temp limit -1
- 02-01 21:13:23.875 384 384 I ThermalEngine: Loading config file for virtual sensor
- 02-01 21:13:23.876 404 404 D QSEECOMD: : Init dlopen(libssd.so, RTLD_NOW) succeeds
- 02-01 21:13:23.876 404 404 D QSEECOMD: : Init::Init dlsym(g_FSHandle ssd_init_service) succeeds
- 02-01 21:13:23.876 404 404 E SSD : ssd_init_service succeeded!
- 02-01 21:13:23.876 404 404 D QSEECOMD: : Init ssd_init_service ret = 0
- 02-01 21:13:23.877 404 404 D QSEECOMD: : SSD system services: init (Listener ID = 12288)
- 02-01 21:13:23.877 404 404 E QSEECOMD: : Listener: index = 2, hierarchy = 0
- 02-01 21:13:23.877 404 404 E QSEECOMD: : Init dlopen(libsecureui.so, RLTD_NOW) is failed....
- 02-01 21:13:23.877 404 404 D QSEECOMD: : SEC_UI_INIT failed, shall not start secure ui listener
- 02-01 21:13:23.877 404 404 D QSEECOMD: : Parent qseecom daemon process paused!!
- 02-01 21:13:23.877 456 456 D QSEECOMD: : qseecom listener service threads starting!!!
- 02-01 21:13:23.877 456 456 D QSEECOMD: : Total listener services to start = 5
- 02-01 21:13:23.877 456 456 E QSEECOMD: : Listener: index = 0, hierarchy = 1
- 02-01 21:13:23.878 456 456 D QSEECOMD: : Init dlopen(librpmb.so, RTLD_NOW) succeeds
- 02-01 21:13:23.878 456 456 D QSEECOMD: : Init::Init dlsym(g_FSHandle rpmb_start) succeeds
- 02-01 21:13:23.878 456 456 D QSEECOMAPI: : QSEECom_register_listener 8192 sb_length = 0x5000
- 02-01 21:13:23.879 456 456 D QSEECOMD: : Init rpmb_start ret = 0
- 02-01 21:13:23.879 456 456 D QSEECOMD: : RPMB system services: Started (Listener ID = 8192)
- 02-01 21:13:23.879 456 456 E QSEECOMD: : Listener: index = 1, hierarchy = 1
- 02-01 21:13:23.879 456 456 D QSEECOMD: : Init dlopen(libssd.so, RTLD_NOW) succeeds
- 02-01 21:13:23.879 456 456 D QSEECOMD: : Init::Init dlsym(g_FSHandle ssd_start) succeeds
- 02-01 21:13:23.879 456 456 D QSEECOMAPI: : QSEECom_register_listener 12288 sb_length = 0x5000
- 02-01 21:13:23.883 384 384 E ThermalEngine: parse_section: algo_type field not first field in section
- 02-01 21:13:23.883 384 384 E ThermalEngine: Sampling time specified too low, using 50 ms
- 02-01 21:13:23.883 384 384 E ThermalEngine: virtual_sensors_init: Error getting virtual sensors set
- 02-01 21:13:23.883 384 384 E ThermalEngine: parse_section: algo_type field not first field in section
- 02-01 21:13:23.883 384 384 E ThermalEngine: Sampling time specified too low, using 50 ms
- 02-01 21:13:23.884 384 384 I ThermalEngine: [CPU3_MONITOR]
- 02-01 21:13:23.884 384 384 I ThermalEngine: algo_type monitor
- 02-01 21:13:23.884 384 384 I ThermalEngine: sampling 65
- 02-01 21:13:23.884 384 384 I ThermalEngine: sensor cpu3
- 02-01 21:13:23.884 384 384 I ThermalEngine: thresholds 115000
- 02-01 21:13:23.884 384 384 I ThermalEngine: thresholds_clr 110000
- 02-01 21:13:23.884 384 384 I ThermalEngine: actions shutdown
- 02-01 21:13:23.884 384 384 I ThermalEngine: action_info 0
- 02-01 21:13:23.884 384 384 I ThermalEngine: [CPU2_MONITOR]
- 02-01 21:13:23.884 384 384 I ThermalEngine: algo_type monitor
- 02-01 21:13:23.884 384 384 I ThermalEngine: sampling 65
- 02-01 21:13:23.884 384 384 I ThermalEngine: sensor cpu2
- 02-01 21:13:23.884 384 384 I ThermalEngine: thresholds 115000
- 02-01 21:13:23.884 384 384 I ThermalEngine: thresholds_clr 110000
- 02-01 21:13:23.884 384 384 I ThermalEngine: actions shutdown
- 02-01 21:13:23.884 384 384 I ThermalEngine: action_info 0
- 02-01 21:13:23.884 384 384 I ThermalEngine: [CPU1_MONITOR]
- 02-01 21:13:23.884 384 384 I ThermalEngine: algo_type monitor
- 02-01 21:13:23.884 384 384 I ThermalEngine: sampling 65
- 02-01 21:13:23.884 384 384 I ThermalEngine: sensor cpu1
- 02-01 21:13:23.884 384 384 I ThermalEngine: thresholds 115000
- 02-01 21:13:23.884 384 384 I ThermalEngine: thresholds_clr 110000
- 02-01 21:13:23.884 384 384 I ThermalEngine: actions shutdown
- 02-01 21:13:23.884 384 384 I ThermalEngine: action_info 0
- 02-01 21:13:23.884 384 384 I ThermalEngine: [CPU0_MONITOR]
- 02-01 21:13:23.884 384 384 I ThermalEngine: algo_type monitor
- 02-01 21:13:23.884 384 384 I ThermalEngine: sampling 65
- 02-01 21:13:23.884 384 384 I ThermalEngine: sensor cpu0
- 02-01 21:13:23.884 384 384 I ThermalEngine: thresholds 115000
- 02-01 21:13:23.884 384 384 I ThermalEngine: thresholds_clr 110000
- 02-01 21:13:23.884 384 384 I ThermalEngine: actions shutdown
- 02-01 21:13:23.884 384 384 I ThermalEngine: action_info 0
- 02-01 21:13:23.884 384 384 I ThermalEngine: [GPU_MONITOR]
- 02-01 21:13:23.884 384 384 I ThermalEngine: algo_type monitor
- 02-01 21:13:23.884 384 384 I ThermalEngine: sampling 1000
- 02-01 21:13:23.884 384 384 I ThermalEngine: sensor tsens_tz_sensor10
- 02-01 21:13:23.884 384 384 I ThermalEngine: thresholds 75000
- 02-01 21:13:23.884 384 384 I ThermalEngine: thresholds_clr 55000
- 02-01 21:13:23.881 0 0 E pil-q6v5-mss fc880000.qcom,mss: mba: Failed to locate mba.mdt
- 02-01 21:13:23.884 384 384 I ThermalEngine: actions battery
- 02-01 21:13:23.884 384 384 I ThermalEngine: action_info 1
- 02-01 21:13:23.881 0 0 E modem_notifier_cb: sysmon_send_event error -19
- 02-01 21:13:23.884 384 384 I ThermalEngine: [PMIC-ALARM-MONITOR]
- 02-01 21:13:23.884 384 384 I ThermalEngine: #algo_type monitor
- 02-01 21:13:23.881 0 0 E M-Notify: General: 5
- 02-01 21:13:23.884 384 384 I ThermalEngine: sampling 1000
- 02-01 21:13:23.884 384 384 I ThermalEngine: sensor pm8841_tz
- 02-01 21:13:23.884 384 384 I ThermalEngine: thresholds 107000 127000
- 02-01 21:13:23.884 384 384 I ThermalEngine: thresholds_clr 103000 123000
- 02-01 21:13:23.884 384 384 I ThermalEngine: actions hotplug_1+hotplug_2+hotplug_3+cpu0+cpu1+cpu2+cpu3 hotplug_1+hotplug_2+hotplug_3
- 02-01 21:13:23.884 384 384 I ThermalEngine: action_info 0+0+0+960000+960000+960000+960000 1+1+1
- 02-01 21:13:23.884 384 384 I ThermalEngine: [VDD_DIG_SWMODE_MONITOR-TSENS10]
- 02-01 21:13:23.884 384 384 I ThermalEngine: #algo_type monitor
- 02-01 21:13:23.884 384 384 I ThermalEngine: sampling 1000
- 02-01 21:13:23.884 384 384 I ThermalEngine: sensor tsens_tz_sensor10
- 02-01 21:13:23.884 384 384 I ThermalEngine: thresholds 85000
- 02-01 21:13:23.884 384 384 I ThermalEngine: thresholds_clr 75000
- 02-01 21:13:23.884 384 384 I ThermalEngine: actions vdd_dig_swmode
- 02-01 21:13:23.884 384 384 I ThermalEngine: action_info 1
- 02-01 21:13:23.884 384 384 I ThermalEngine: [VDD_DIG_SWMODE_MONITOR-TSENS9]
- 02-01 21:13:23.884 384 384 I ThermalEngine: #algo_type monitor
- 02-01 21:13:23.884 384 384 I ThermalEngine: sampling 1000
- 02-01 21:13:23.884 384 384 I ThermalEngine: sensor tsens_tz_sensor9
- 02-01 21:13:23.884 384 384 I ThermalEngine: thresholds 85000
- 02-01 21:13:23.884 384 384 I ThermalEngine: thresholds_clr 75000
- 02-01 21:13:23.884 384 384 I ThermalEngine: actions vdd_dig_swmode
- 02-01 21:13:23.884 384 384 I ThermalEngine: action_info 1
- 02-01 21:13:23.884 384 384 I ThermalEngine: [VDD_DIG_SWMODE_MONITOR-TSENS8]
- 02-01 21:13:23.884 384 384 I ThermalEngine: #algo_type monitor
- 02-01 21:13:23.884 384 384 I ThermalEngine: sampling 1000
- 02-01 21:13:23.884 384 384 I ThermalEngine: sensor tsens_tz_sensor8
- 02-01 21:13:23.884 384 384 I ThermalEngine: thresholds 85000
- 02-01 21:13:23.884 384 384 I ThermalEngine: thresholds_clr 75000
- 02-01 21:13:23.884 384 384 I ThermalEngine: actions vdd_dig_swmode
- 02-01 21:13:23.884 384 384 I ThermalEngine: action_info 1
- 02-01 21:13:23.884 384 384 I ThermalEngine: [VDD_DIG_SWMODE_MONITOR-TSENS7]
- 02-01 21:13:23.881 0 0 E : smd_pkt_open failed on smd_pkt_dev id:0 - subsystem_get failed for modem
- 02-01 21:13:23.884 384 384 I ThermalEngine: #algo_type monitor
- 02-01 21:13:23.884 384 384 I ThermalEngine: sampling 1000
- 02-01 21:13:23.884 384 384 I ThermalEngine: sensor tsens_tz_sensor7
- 02-01 21:13:23.884 384 384 I ThermalEngine: thresholds 85000
- 02-01 21:13:23.885 384 384 I ThermalEngine: thresholds_clr 75000
- 02-01 21:13:23.885 384 384 I ThermalEngine: actions vdd_dig_swmode
- 02-01 21:13:23.885 384 384 I ThermalEngine: action_info 1
- 02-01 21:13:23.885 384 384 I ThermalEngine: [VDD_DIG_SWMODE_MONITOR-TSENS6]
- 02-01 21:13:23.885 384 384 I ThermalEngine: #algo_type monitor
- 02-01 21:13:23.885 384 384 I ThermalEngine: sampling 1000
- 02-01 21:13:23.885 384 384 I ThermalEngine: sensor tsens_tz_sensor6
- 02-01 21:13:23.885 384 384 I ThermalEngine: thresholds 85000
- 02-01 21:13:23.885 384 384 I ThermalEngine: thresholds_clr 75000
- 02-01 21:13:23.885 384 384 I ThermalEngine: actions vdd_dig_swmode
- 02-01 21:13:23.885 384 384 I ThermalEngine: action_info 1
- 02-01 21:13:23.885 384 384 I ThermalEngine: [VDD_DIG_SWMODE_MONITOR-TSENS5]
- 02-01 21:13:23.885 384 384 I ThermalEngine: #algo_type monitor
- 02-01 21:13:23.885 384 384 I ThermalEngine: sampling 1000
- 02-01 21:13:23.885 384 384 I ThermalEngine: sensor tsens_tz_sensor5
- 02-01 21:13:23.885 384 384 I ThermalEngine: thresholds 85000
- 02-01 21:13:23.902 0 0 I msm_thermal: set_enabled enabled = 0
- 02-01 21:13:23.885 384 384 I ThermalEngine: thresholds_clr 75000
- 02-01 21:13:23.902 0 0 I android_work: android_work: did not send uevent (0 0 (null))
- 02-01 21:13:23.885 384 384 I ThermalEngine: actions vdd_dig_swmode
- 02-01 21:13:23.885 384 384 I ThermalEngine: action_info 1
- 02-01 21:13:23.885 384 384 I ThermalEngine: [VDD_DIG_SWMODE_MONITOR-TSENS4]
- 02-01 21:13:23.885 384 384 I ThermalEngine: #algo_type monitor
- 02-01 21:13:23.885 384 384 I ThermalEngine: sampling 1000
- 02-01 21:13:23.885 384 384 I ThermalEngine: sensor tsens_tz_sensor4
- 02-01 21:13:23.885 384 384 I ThermalEngine: thresholds 85000
- 02-01 21:13:23.885 384 384 I ThermalEngine: thresholds_clr 75000
- 02-01 21:13:23.885 384 384 I ThermalEngine: actions vdd_dig_swmode
- 02-01 21:13:23.885 384 384 I ThermalEngine: action_info 1
- 02-01 21:13:23.885 384 384 I ThermalEngine: [VDD_DIG_SWMODE_MONITOR-TSENS3]
- 02-01 21:13:23.885 384 384 I ThermalEngine: #algo_type monitor
- 02-01 21:13:23.885 384 384 I ThermalEngine: sampling 1000
- 02-01 21:13:23.885 384 384 I ThermalEngine: sensor tsens_tz_sensor3
- 02-01 21:13:23.885 384 384 I ThermalEngine: thresholds 85000
- 02-01 21:13:23.885 384 384 I ThermalEngine: thresholds_clr 75000
- 02-01 21:13:23.885 384 384 I ThermalEngine: actions vdd_dig_swmode
- 02-01 21:13:23.885 384 384 I ThermalEngine: action_info 1
- 02-01 21:13:23.885 384 384 I ThermalEngine: [VDD_DIG_SWMODE_MONITOR-TSENS2]
- 02-01 21:13:23.885 384 384 I ThermalEngine: #algo_type monitor
- 02-01 21:13:23.885 384 384 I ThermalEngine: sampling 1000
- 02-01 21:13:23.885 384 384 I ThermalEngine: sensor tsens_tz_sensor2
- 02-01 21:13:23.885 384 384 I ThermalEngine: thresholds 85000
- 02-01 21:13:23.885 384 384 I ThermalEngine: thresholds_clr 75000
- 02-01 21:13:23.885 384 384 I ThermalEngine: actions vdd_dig_swmode
- 02-01 21:13:23.885 384 384 I ThermalEngine: action_info 1
- 02-01 21:13:23.885 384 384 I ThermalEngine: [VDD_DIG_SWMODE_MONITOR-TSENS1]
- 02-01 21:13:23.885 384 384 I ThermalEngine: #algo_type monitor
- 02-01 21:13:23.885 384 384 I ThermalEngine: sampling 1000
- 02-01 21:13:23.885 384 384 I ThermalEngine: sensor tsens_tz_sensor1
- 02-01 21:13:23.885 384 384 I ThermalEngine: thresholds 85000
- 02-01 21:13:23.885 384 384 I ThermalEngine: thresholds_clr 75000
- 02-01 21:13:23.885 384 384 I ThermalEngine: actions vdd_dig_swmode
- 02-01 21:13:23.885 384 384 I ThermalEngine: action_info 1
- 02-01 21:13:23.885 384 384 I ThermalEngine: [VDD_DIG_SWMODE_MONITOR-TSENS0]
- 02-01 21:13:23.885 384 384 I ThermalEngine: #algo_type monitor
- 02-01 21:13:23.885 384 384 I ThermalEngine: sampling 1000
- 02-01 21:13:23.885 384 384 I ThermalEngine: sensor tsens_tz_sensor0
- 02-01 21:13:23.885 384 384 I ThermalEngine: thresholds 85000
- 02-01 21:13:23.885 384 384 I ThermalEngine: thresholds_clr 75000
- 02-01 21:13:23.885 384 384 I ThermalEngine: actions vdd_dig_swmode
- 02-01 21:13:23.885 384 384 I ThermalEngine: action_info 1
- 02-01 21:13:23.885 384 384 I ThermalEngine: [VDD_RSTR_MONITOR-TSENS10]
- 02-01 21:13:23.885 384 384 I ThermalEngine: #algo_type monitor
- 02-01 21:13:23.885 384 384 I ThermalEngine: sampling 1000
- 02-01 21:13:23.885 384 384 I ThermalEngine: sensor tsens_tz_sensor10
- 02-01 21:13:23.885 384 384 I ThermalEngine: thresholds 5000
- 02-01 21:13:23.885 384 384 I ThermalEngine: thresholds_clr 10000
- 02-01 21:13:23.885 384 384 I ThermalEngine: actions vdd_restriction
- 02-01 21:13:23.885 384 384 I ThermalEngine: action_info 1
- 02-01 21:13:23.885 384 384 I ThermalEngine: descending
- 02-01 21:13:23.885 384 384 I ThermalEngine: [VDD_RSTR_MONITOR-TSENS9]
- 02-01 21:13:23.885 384 384 I ThermalEngine: #algo_type monitor
- 02-01 21:13:23.885 384 384 I ThermalEngine: sampling 1000
- 02-01 21:13:23.885 384 384 I ThermalEngine: sensor tsens_tz_sensor9
- 02-01 21:13:23.885 384 384 I ThermalEngine: thresholds 5000
- 02-01 21:13:23.885 384 384 I ThermalEngine: thresholds_clr 10000
- 02-01 21:13:23.885 384 384 I ThermalEngine: actions vdd_restriction
- 02-01 21:13:23.885 384 384 I ThermalEngine: action_info 1
- 02-01 21:13:23.885 384 384 I ThermalEngine: descending
- 02-01 21:13:23.885 384 384 I ThermalEngine: [VDD_RSTR_MONITOR-TSENS8]
- 02-01 21:13:23.885 384 384 I ThermalEngine: #algo_type monitor
- 02-01 21:13:23.885 384 384 I ThermalEngine: sampling 1000
- 02-01 21:13:23.885 384 384 I ThermalEngine: sensor tsens_tz_sensor8
- 02-01 21:13:23.885 384 384 I ThermalEngine: thresholds 5000
- 02-01 21:13:23.885 384 384 I ThermalEngine: thresholds_clr 10000
- 02-01 21:13:23.885 384 384 I ThermalEngine: actions vdd_restriction
- 02-01 21:13:23.885 384 384 I ThermalEngine: action_info 1
- 02-01 21:13:23.885 384 384 I ThermalEngine: descending
- 02-01 21:13:23.885 384 384 I ThermalEngine: [VDD_RSTR_MONITOR-TSENS7]
- 02-01 21:13:23.886 384 384 I ThermalEngine: #algo_type monitor
- 02-01 21:13:23.886 384 384 I ThermalEngine: sampling 1000
- 02-01 21:13:23.886 384 384 I ThermalEngine: sensor tsens_tz_sensor7
- 02-01 21:13:23.886 384 384 I ThermalEngine: thresholds 5000
- 02-01 21:13:23.886 384 384 I ThermalEngine: thresholds_clr 10000
- 02-01 21:13:23.886 384 384 I ThermalEngine: actions vdd_restriction
- 02-01 21:13:23.886 384 384 I ThermalEngine: action_info 1
- 02-01 21:13:23.886 384 384 I ThermalEngine: descending
- 02-01 21:13:23.886 384 384 I ThermalEngine: [VDD_RSTR_MONITOR-TSENS6]
- 02-01 21:13:23.886 384 384 I ThermalEngine: #algo_type monitor
- 02-01 21:13:23.886 384 384 I ThermalEngine: sampling 1000
- 02-01 21:13:23.886 384 384 I ThermalEngine: sensor tsens_tz_sensor6
- 02-01 21:13:23.886 384 384 I ThermalEngine: thresholds 5000
- 02-01 21:13:23.886 384 384 I ThermalEngine: thresholds_clr 10000
- 02-01 21:13:23.886 384 384 I ThermalEngine: actions vdd_restriction
- 02-01 21:13:23.886 384 384 I ThermalEngine: action_info 1
- 02-01 21:13:23.886 384 384 I ThermalEngine: descending
- 02-01 21:13:23.886 384 384 I ThermalEngine: [VDD_RSTR_MONITOR-TSENS5]
- 02-01 21:13:23.886 384 384 I ThermalEngine: #algo_type monitor
- 02-01 21:13:23.886 384 384 I ThermalEngine: sampling 1000
- 02-01 21:13:23.886 384 384 I ThermalEngine: sensor tsens_tz_sensor5
- 02-01 21:13:23.886 384 384 I ThermalEngine: thresholds 5000
- 02-01 21:13:23.886 384 384 I ThermalEngine: thresholds_clr 10000
- 02-01 21:13:23.886 384 384 I ThermalEngine: actions vdd_restriction
- 02-01 21:13:23.886 384 384 I ThermalEngine: action_info 1
- 02-01 21:13:23.886 384 384 I ThermalEngine: descending
- 02-01 21:13:23.886 384 384 I ThermalEngine: [VDD_RSTR_MONITOR-TSENS4]
- 02-01 21:13:23.886 384 384 I ThermalEngine: #algo_type monitor
- 02-01 21:13:23.886 384 384 I ThermalEngine: sampling 1000
- 02-01 21:13:23.886 384 384 I ThermalEngine: sensor tsens_tz_sensor4
- 02-01 21:13:23.886 384 384 I ThermalEngine: thresholds 5000
- 02-01 21:13:23.886 384 384 I ThermalEngine: thresholds_clr 10000
- 02-01 21:13:23.886 384 384 I ThermalEngine: actions vdd_restriction
- 02-01 21:13:23.886 384 384 I ThermalEngine: action_info 1
- 02-01 21:13:23.886 384 384 I ThermalEngine: descending
- 02-01 21:13:23.886 384 384 I ThermalEngine: [VDD_RSTR_MONITOR-TSENS3]
- 02-01 21:13:23.886 384 384 I ThermalEngine: #algo_type monitor
- 02-01 21:13:23.886 384 384 I ThermalEngine: sampling 1000
- 02-01 21:13:23.886 384 384 I ThermalEngine: sensor tsens_tz_sensor3
- 02-01 21:13:23.886 384 384 I ThermalEngine: thresholds 5000
- 02-01 21:13:23.886 384 384 I ThermalEngine: thresholds_clr 10000
- 02-01 21:13:23.886 384 384 I ThermalEngine: actions vdd_restriction
- 02-01 21:13:23.886 384 384 I ThermalEngine: action_info 1
- 02-01 21:13:23.886 384 384 I ThermalEngine: descending
- 02-01 21:13:23.886 384 384 I ThermalEngine: [VDD_RSTR_MONITOR-TSENS2]
- 02-01 21:13:23.886 384 384 I ThermalEngine: #algo_type monitor
- 02-01 21:13:23.886 384 384 I ThermalEngine: sampling 1000
- 02-01 21:13:23.886 384 384 I ThermalEngine: sensor tsens_tz_sensor2
- 02-01 21:13:23.886 384 384 I ThermalEngine: thresholds 5000
- 02-01 21:13:23.886 384 384 I ThermalEngine: thresholds_clr 10000
- 02-01 21:13:23.886 384 384 I ThermalEngine: actions vdd_restriction
- 02-01 21:13:23.886 384 384 I ThermalEngine: action_info 1
- 02-01 21:13:23.886 384 384 I ThermalEngine: descending
- 02-01 21:13:23.886 384 384 I ThermalEngine: [VDD_RSTR_MONITOR-TSENS1]
- 02-01 21:13:23.886 384 384 I ThermalEngine: #algo_type monitor
- 02-01 21:13:23.886 384 384 I ThermalEngine: sampling 1000
- 02-01 21:13:23.886 384 384 I ThermalEngine: sensor tsens_tz_sensor1
- 02-01 21:13:23.886 384 384 I ThermalEngine: thresholds 5000
- 02-01 21:13:23.886 384 384 I ThermalEngine: thresholds_clr 10000
- 02-01 21:13:23.886 384 384 I ThermalEngine: actions vdd_restriction
- 02-01 21:13:23.886 384 384 I ThermalEngine: action_info 1
- 02-01 21:13:23.886 384 384 I ThermalEngine: descending
- 02-01 21:13:23.886 384 384 I ThermalEngine: [VDD_RSTR_MONITOR-TSENS0]
- 02-01 21:13:23.886 384 384 I ThermalEngine: #algo_type monitor
- 02-01 21:13:23.886 384 384 I ThermalEngine: sampling 1000
- 02-01 21:13:23.886 384 384 I ThermalEngine: sensor tsens_tz_sensor0
- 02-01 21:13:23.886 384 384 I ThermalEngine: thresholds 5000
- 02-01 21:13:23.886 384 384 I ThermalEngine: thresholds_clr 10000
- 02-01 21:13:23.886 384 384 I ThermalEngine: actions vdd_restriction
- 02-01 21:13:23.886 384 384 I ThermalEngine: action_info 1
- 02-01 21:13:23.886 384 384 I ThermalEngine: descending
- 02-01 21:13:23.887 384 384 I ThermalEngine: [SS-POPMEM]
- 02-01 21:13:23.887 384 384 I ThermalEngine: #algo_type ss
- 02-01 21:13:23.887 384 384 I ThermalEngine: sampling 50
- 02-01 21:13:23.887 384 384 I ThermalEngine: sensor pop_mem
- 02-01 21:13:23.887 384 384 I ThermalEngine: device cpu
- 02-01 21:13:23.887 384 464 I ThermalEngine: Sensor:tsens_tz_sensor8:60000 mC
- 02-01 21:13:23.887 384 384 I ThermalEngine: set_point 80000
- 02-01 21:13:23.887 384 384 I ThermalEngine: set_point_clr 55000
- 02-01 21:13:23.887 384 384 I ThermalEngine: time_constant 16
- 02-01 21:13:23.887 384 384 I ThermalEngine: override 15000
- 02-01 21:13:23.887 384 384 I ThermalEngine: [SS-CPU3]
- 02-01 21:13:23.887 384 464 I ThermalEngine: Sensor:tsens_tz_sensor7:60000 mC
- 02-01 21:13:23.887 384 384 I ThermalEngine: #algo_type ss
- 02-01 21:13:23.887 384 384 I ThermalEngine: sampling 100
- 02-01 21:13:23.887 384 384 I ThermalEngine: sensor cpu3
- 02-01 21:13:23.887 384 384 I ThermalEngine: device cpu
- 02-01 21:13:23.887 384 384 I ThermalEngine: set_point 75000
- 02-01 21:13:23.887 384 384 I ThermalEngine: set_point_clr 60000
- 02-01 21:13:23.887 384 384 I ThermalEngine: time_constant 0
- 02-01 21:13:23.887 384 384 I ThermalEngine: override 15000
- 02-01 21:13:23.887 384 384 I ThermalEngine: [SS-CPU2]
- 02-01 21:13:23.887 384 464 I ThermalEngine: Sensor:tsens_tz_sensor6:64000 mC
- 02-01 21:13:23.887 384 384 I ThermalEngine: #algo_type ss
- 02-01 21:13:23.887 384 443 I ThermalEngine: Sensor:tsens_tz_sensor7:60000 mC
- 02-01 21:13:23.887 384 384 I ThermalEngine: sampling 100
- 02-01 21:13:23.887 384 384 I ThermalEngine: sensor cpu2
- 02-01 21:13:23.887 384 384 I ThermalEngine: device cpu
- 02-01 21:13:23.887 384 384 I ThermalEngine: set_point 75000
- 02-01 21:13:23.887 384 384 I ThermalEngine: set_point_clr 60000
- 02-01 21:13:23.887 384 384 I ThermalEngine: time_constant 0
- 02-01 21:13:23.887 384 384 I ThermalEngine: override 15000
- 02-01 21:13:23.888 384 464 I ThermalEngine: Sensor:tsens_tz_sensor5:62000 mC
- 02-01 21:13:23.888 384 445 I ThermalEngine: Sensor:tsens_tz_sensor8:60000 mC
- 02-01 21:13:23.888 384 441 I ThermalEngine: Sensor:tsens_tz_sensor6:64000 mC
- 02-01 21:13:23.888 384 384 I ThermalEngine: [SS-CPU1]
- 02-01 21:13:23.888 384 384 I ThermalEngine: #algo_type ss
- 02-01 21:13:23.888 384 384 I ThermalEngine: sampling 100
- 02-01 21:13:23.888 384 384 I ThermalEngine: sensor cpu1
- 02-01 21:13:23.888 384 384 I ThermalEngine: device cpu
- 02-01 21:13:23.888 384 384 I ThermalEngine: set_point 75000
- 02-01 21:13:23.888 384 384 I ThermalEngine: set_point_clr 60000
- 02-01 21:13:23.888 384 384 I ThermalEngine: time_constant 0
- 02-01 21:13:23.888 384 384 I ThermalEngine: override 15000
- 02-01 21:13:23.888 384 464 I ThermalEngine: Sensor:tsens_tz_sensor10:49000 mC
- 02-01 21:13:23.888 384 464 I ThermalEngine: Sensor:pm8841_tz:37000 mC
- 02-01 21:13:23.888 384 449 I ThermalEngine: Sensor:tsens_tz_sensor10:49000 mC
- 02-01 21:13:23.888 384 464 I ThermalEngine: Sensor:tsens_tz_sensor10:49000 mC
- 02-01 21:13:23.888 384 384 I ThermalEngine: [SS-CPU0]
- 02-01 21:13:23.888 384 454 I ThermalEngine: Sensor:pm8841_tz:37000 mC
- 02-01 21:13:23.888 384 384 I ThermalEngine: #algo_type ss
- 02-01 21:13:23.888 384 384 I ThermalEngine: sampling 100
- 02-01 21:13:23.888 384 384 I ThermalEngine: sensor cpu0
- 02-01 21:13:23.888 384 384 I ThermalEngine: device cpu
- 02-01 21:13:23.889 384 384 I ThermalEngine: set_point 75000
- 02-01 21:13:23.889 384 384 I ThermalEngine: set_point_clr 60000
- 02-01 21:13:23.889 384 384 I ThermalEngine: time_constant 0
- 02-01 21:13:23.889 384 384 I ThermalEngine: override 15000
- 02-01 21:13:23.889 384 464 I ThermalEngine: Sensor:tsens_tz_sensor9:51000 mC
- 02-01 21:13:23.889 384 464 I ThermalEngine: Sensor:tsens_tz_sensor8:60000 mC
- 02-01 21:13:23.889 384 447 I ThermalEngine: Sensor:tsens_tz_sensor9:51000 mC
- 02-01 21:13:23.889 384 384 I ThermalEngine: [SPEAKER-CAL]
- 02-01 21:13:23.889 384 384 I ThermalEngine: sampling 30000 30000 10 1800000
- 02-01 21:13:23.889 384 384 I ThermalEngine: sensor pm8941_tz
- 02-01 21:13:23.889 384 384 I ThermalEngine: sensors tsens_tz_sensor1 tsens_tz_sensor2 tsens_tz_sensor3 tsens_tz_sensor4 tsens_tz_sensor7 tsens_tz_sensor8 tsens_tz_sensor9 tsens_tz_sensor10
- 02-01 21:13:23.889 384 384 I ThermalEngine: temp_range 6000 10000 2000
- 02-01 21:13:23.889 384 384 I ThermalEngine: max_temp 45000
- 02-01 21:13:23.889 384 384 I ThermalEngine: offset -4000
- 02-01 21:13:23.889 384 439 I ThermalEngine: Sensor:tsens_tz_sensor5:62000 mC
- 02-01 21:13:23.889 384 464 I ThermalEngine: Sensor:tsens_tz_sensor7:60000 mC
- 02-01 21:13:23.890 384 466 I ThermalEngine: Sensor:tsens_tz_sensor3:51000 mC
- 02-01 21:13:23.891 384 464 I ThermalEngine: Sensor:tsens_tz_sensor6:64000 mC
- 02-01 21:13:23.891 384 435 I ThermalEngine: Sensor:tsens_tz_sensor3:51000 mC
- 02-01 21:13:23.891 384 464 I ThermalEngine: Sensor:tsens_tz_sensor5:62000 mC
- 02-01 21:13:23.892 384 466 I ThermalEngine: Sensor:tsens_tz_sensor8:60000 mC
- 02-01 21:13:23.892 384 464 I ThermalEngine: Sensor:tsens_tz_sensor4:55000 mC
- 02-01 21:13:23.892 384 466 I ThermalEngine: Sensor:tsens_tz_sensor7:60000 mC
- 02-01 21:13:23.892 384 464 I ThermalEngine: Sensor:tsens_tz_sensor3:51000 mC
- 02-01 21:13:23.892 384 437 I ThermalEngine: Sensor:tsens_tz_sensor4:55000 mC
- 02-01 21:13:23.893 384 466 I ThermalEngine: Sensor:tsens_tz_sensor6:64000 mC
- 02-01 21:13:23.893 384 466 I ThermalEngine: Sensor:tsens_tz_sensor5:62000 mC
- 02-01 21:13:23.894 384 464 I ThermalEngine: Sensor:tsens_tz_sensor2:49000 mC
- 02-01 21:13:23.894 384 464 I ThermalEngine: Sensor:tsens_tz_sensor1:52000 mC
- 02-01 21:13:23.894 384 433 I ThermalEngine: Sensor:tsens_tz_sensor2:49000 mC
- 02-01 21:13:23.894 384 464 I ThermalEngine: Sensor:tsens_tz_sensor0:56000 mC
- 02-01 21:13:23.894 384 431 I ThermalEngine: Sensor:tsens_tz_sensor1:52000 mC
- 02-01 21:13:23.895 384 464 I ThermalEngine: Sensor:tsens_tz_sensor10:49000 mC
- 02-01 21:13:23.895 384 428 I ThermalEngine: Sensor:tsens_tz_sensor0:56000 mC
- 02-01 21:13:23.895 456 456 D QSEECOMD: : Init ssd_start ret = 0
- 02-01 21:13:23.895 456 456 D QSEECOMD: : SSD system services: Started (Listener ID = 12288)
- 02-01 21:13:23.895 456 456 E QSEECOMD: : Listener: index = 2, hierarchy = 1
- 02-01 21:13:23.895 384 464 I ThermalEngine: Sensor:tsens_tz_sensor9:51000 mC
- 02-01 21:13:23.896 384 464 I ThermalEngine: Sensor:tsens_tz_sensor8:60000 mC
- 02-01 21:13:23.896 456 456 E QSEECOMD: : Init dlopen(libsecureui.so, RLTD_NOW) is failed....
- 02-01 21:13:23.896 456 456 E QSEECOMD: : Listener: index = 3, hierarchy = 1
- 02-01 21:13:23.896 384 464 I ThermalEngine: Sensor:tsens_tz_sensor7:60000 mC
- 02-01 21:13:23.897 384 464 I ThermalEngine: Sensor:tsens_tz_sensor6:64000 mC
- 02-01 21:13:23.897 384 464 I ThermalEngine: Sensor:tsens_tz_sensor5:62000 mC
- 02-01 21:13:23.897 384 464 I ThermalEngine: Sensor:tsens_tz_sensor4:55000 mC
- 02-01 21:13:23.897 384 464 I ThermalEngine: Sensor:tsens_tz_sensor3:51000 mC
- 02-01 21:13:23.898 384 464 I ThermalEngine: Sensor:tsens_tz_sensor2:49000 mC
- 02-01 21:13:23.898 384 464 I ThermalEngine: Sensor:tsens_tz_sensor1:52000 mC
- 02-01 21:13:23.898 384 464 I ThermalEngine: Sensor:tsens_tz_sensor0:56000 mC
- 02-01 21:13:23.898 384 464 I ThermalEngine: vdd_restrict_qmi_request: MODEM req level(0) is recorded and waiting for completing QMI registration
- 02-01 21:13:23.898 384 464 I ThermalEngine: vdd_restrict_qmi_request: ADSP req level(0) is recorded and waiting for completing QMI registration
- 02-01 21:13:23.899 384 464 I ThermalEngine: hotplug_ktm_disable_cb: write out 0
- 02-01 21:13:23.906 456 456 D QSEECOMD: : Init dlopen(libdrmtime.so, RTLD_NOW) succeeds
- 02-01 21:13:23.906 456 456 D QSEECOMD: : Init::Init dlsym(g_FSHandle atime_start) succeeds
- 02-01 21:13:23.906 456 456 D QSEECOMAPI: : QSEECom_register_listener 11 sb_length = 0x5000
- 02-01 21:13:23.907 456 456 D QSEECOMD: : Init atime_start ret = 0
- 02-01 21:13:23.907 456 456 D QSEECOMD: : time services: Started (Listener ID = 11)
- 02-01 21:13:23.907 456 456 E QSEECOMD: : Listener: index = 4, hierarchy = 1
- 02-01 21:13:23.907 456 456 D QSEECOMD: : Init dlopen(libdrmfs.so, RTLD_NOW) succeeds
- 02-01 21:13:23.907 456 456 D QSEECOMD: : Init::Init dlsym(g_FSHandle fs_start) succeeds
- 02-01 21:13:23.907 456 456 D QSEECOMAPI: : QSEECom_register_listener 10 sb_length = 0x5000
- 02-01 21:13:23.910 456 456 D QSEECOMD: : Init fs_start ret = 0
- 02-01 21:13:23.910 456 456 D QSEECOMD: : file system services: Started (Listener ID = 10)
- 02-01 21:13:23.911 456 456 D QSEECOMD: : QSEECOM DAEMON RUNNING
- 02-01 21:13:23.913 405 405 D QC-time-services: Daemon:genoff_pre_init::Base = 0
- 02-01 21:13:23.913 405 405 D QC-time-services: Daemon:ats_rtc_init: Time read from RTC -- year = 70, month = 1,day = 1
- 02-01 21:13:23.913 405 405 D QC-time-services: Daemon:Value read from RTC seconds = 2754804000
- 02-01 21:13:23.913 405 405 D QC-time-services: Daemon:genoff_init_config: ATS_RTC initialized
- 02-01 21:13:23.913 405 405 D QC-time-services: Daemon:genoff_pre_init::Base = 1
- 02-01 21:13:23.913 405 405 D QC-time-services: Daemon: Storage Name: ats_1
- 02-01 21:13:23.913 405 405 D QC-time-services: Daemon:Opening File: /data/time/ats_1
- 02-01 21:13:23.913 405 405 D QC-time-services: Daemon:time_persistent_memory_opr:Genoff Read operation
- 02-01 21:13:23.916 405 405 D QC-time-services: Daemon:genoff_pre_init::Base = 2
- 02-01 21:13:23.916 405 405 D QC-time-services: Daemon: Storage Name: ats_2
- 02-01 21:13:23.916 405 405 D QC-time-services: Daemon:Opening File: /data/time/ats_2
- 02-01 21:13:23.916 405 405 D QC-time-services: Daemon:time_persistent_memory_opr:Genoff Read operation
- 02-01 21:13:23.916 405 405 D QC-time-services: Daemon:Unable to open filefor read
- 02-01 21:13:23.916 405 405 D QC-time-services: Daemon:genoff_post_init:Error in accessing storage
- 02-01 21:13:23.916 405 405 D QC-time-services: Daemon:genoff_pre_init::Base = 3
- 02-01 21:13:23.916 405 405 D QC-time-services: Daemon: Storage Name: ats_3
- 02-01 21:13:23.916 405 405 D QC-time-services: Daemon:Opening File: /data/time/ats_3
- 02-01 21:13:23.916 405 405 D QC-time-services: Daemon:time_persistent_memory_opr:Genoff Read operation
- 02-01 21:13:23.916 405 405 D QC-time-services: Daemon:Unable to open filefor read
- 02-01 21:13:23.916 405 405 D QC-time-services: Daemon:genoff_post_init:Error in accessing storage
- 02-01 21:13:23.916 405 405 D QC-time-services: Daemon:genoff_pre_init::Base = 4
- 02-01 21:13:23.916 405 405 D QC-time-services: Daemon: Storage Name: ats_4
- 02-01 21:13:23.916 405 405 D QC-time-services: Daemon:Opening File: /data/time/ats_4
- 02-01 21:13:23.916 405 405 D QC-time-services: Daemon:time_persistent_memory_opr:Genoff Read operation
- 02-01 21:13:23.916 405 405 D QC-time-services: Daemon:Unable to open filefor read
- 02-01 21:13:23.916 405 405 D QC-time-services: Daemon:genoff_post_init:Error in accessing storage
- 02-01 21:13:23.916 405 405 D QC-time-services: Daemon:genoff_pre_init::Base = 5
- 02-01 21:13:23.916 405 405 D QC-time-services: Daemon: Storage Name: ats_5
- 02-01 21:13:23.916 405 405 D QC-time-services: Daemon:Opening File: /data/time/ats_5
- 02-01 21:13:23.916 405 405 D QC-time-services: Daemon:time_persistent_memory_opr:Genoff Read operation
- 02-01 21:13:23.916 405 405 D QC-time-services: Daemon:Unable to open filefor read
- 02-01 21:13:23.916 405 405 D QC-time-services: Daemon:genoff_post_init:Error in accessing storage
- 02-01 21:13:23.916 405 405 D QC-time-services: Daemon:genoff_pre_init::Base = 6
- 02-01 21:13:23.916 405 405 D QC-time-services: Daemon: Storage Name: ats_6
- 02-01 21:13:23.916 405 405 D QC-time-services: Daemon:Opening File: /data/time/ats_6
- 02-01 21:13:23.916 405 405 D QC-time-services: Daemon:time_persistent_memory_opr:Genoff Read operation
- 02-01 21:13:23.916 405 405 D QC-time-services: Daemon:Unable to open filefor read
- 02-01 21:13:23.916 405 405 D QC-time-services: Daemon:genoff_post_init:Error in accessing storage
- 02-01 21:13:23.916 405 405 D QC-time-services: Daemon:genoff_pre_init::Base = 7
- 02-01 21:13:23.916 405 405 D QC-time-services: Daemon: Storage Name: ats_7
- 02-01 21:13:23.916 405 405 D QC-time-services: Daemon:Opening File: /data/time/ats_7
- 02-01 21:13:23.916 405 405 D QC-time-services: Daemon:time_persistent_memory_opr:Genoff Read operation
- 02-01 21:13:23.916 405 405 D QC-time-services: Daemon:Unable to open filefor read
- 02-01 21:13:23.916 472 472 I launch_daemonsu: (service) /su not mounted yet
- 02-01 21:13:23.916 405 405 D QC-time-services: Daemon:genoff_post_init:Error in accessing storage
- 02-01 21:13:23.916 405 405 D QC-time-services: Daemon:genoff_pre_init::Base = 8
- 02-01 21:13:23.916 405 405 D QC-time-services: Daemon: Storage Name: ats_8
- 02-01 21:13:23.916 405 405 D QC-time-services: Daemon:Opening File: /data/time/ats_8
- 02-01 21:13:23.916 405 405 D QC-time-services: Daemon:time_persistent_memory_opr:Genoff Read operation
- 02-01 21:13:23.916 405 405 D QC-time-services: Daemon:Unable to open filefor read
- 02-01 21:13:23.916 405 405 D QC-time-services: Daemon:genoff_post_init:Error in accessing storage
- 02-01 21:13:23.917 405 405 D QC-time-services: Daemon:genoff_pre_init::Base = 9
- 02-01 21:13:23.917 405 405 D QC-time-services: Daemon: Storage Name: ats_9
- 02-01 21:13:23.917 405 405 D QC-time-services: Daemon:Opening File: /data/time/ats_9
- 02-01 21:13:23.917 405 405 D QC-time-services: Daemon:time_persistent_memory_opr:Genoff Read operation
- 02-01 21:13:23.917 405 405 D QC-time-services: Daemon:Unable to open filefor read
- 02-01 21:13:23.917 405 405 D QC-time-services: Daemon:genoff_post_init:Error in accessing storage
- 02-01 21:13:23.917 405 405 D QC-time-services: Daemon:genoff_pre_init::Base = 10
- 02-01 21:13:23.917 405 405 D QC-time-services: Daemon: Storage Name: ats_10
- 02-01 21:13:23.917 405 405 D QC-time-services: Daemon:Opening File: /data/time/ats_10
- 02-01 21:13:23.917 405 405 D QC-time-services: Daemon:time_persistent_memory_opr:Genoff Read operation
- 02-01 21:13:23.917 405 405 D QC-time-services: Daemon:Unable to open filefor read
- 02-01 21:13:23.917 405 405 D QC-time-services: Daemon:genoff_post_init:Error in accessing storage
- 02-01 21:13:23.917 405 405 D QC-time-services: Daemon:genoff_pre_init::Base = 11
- 02-01 21:13:23.917 405 405 D QC-time-services: Daemon: Storage Name: ats_11
- 02-01 21:13:23.917 405 405 D QC-time-services: Daemon:Opening File: /data/time/ats_11
- 02-01 21:13:23.917 405 405 D QC-time-services: Daemon:time_persistent_memory_opr:Genoff Read operation
- 02-01 21:13:23.917 405 405 D QC-time-services: Daemon:Unable to open filefor read
- 02-01 21:13:23.917 405 405 D QC-time-services: Daemon:genoff_post_init:Error in accessing storage
- 02-01 21:13:23.917 405 405 D QC-time-services: Daemon:genoff_pre_init::Base = 12
- 02-01 21:13:23.917 405 405 D QC-time-services: Daemon: Storage Name: ats_12
- 02-01 21:13:23.917 405 405 D QC-time-services: Daemon:Opening File: /data/time/ats_12
- 02-01 21:13:23.917 405 405 D QC-time-services: Daemon:time_persistent_memory_opr:Genoff Read operation
- 02-01 21:13:23.917 405 405 D QC-time-services: Daemon:Unable to open filefor read
- 02-01 21:13:23.917 405 405 D QC-time-services: Daemon:genoff_post_init:Error in accessing storage
- 02-01 21:13:23.917 405 405 D QC-time-services: Daemon:genoff_pre_init::Base = 13
- 02-01 21:13:23.917 405 405 D QC-time-services: Daemon: Storage Name: ats_13
- 02-01 21:13:23.917 405 405 D QC-time-services: Daemon:Opening File: /data/time/ats_13
- 02-01 21:13:23.917 405 405 D QC-time-services: Daemon:time_persistent_memory_opr:Genoff Read operation
- 02-01 21:13:23.917 405 405 D QC-time-services: Daemon:Unable to open filefor read
- 02-01 21:13:23.917 405 405 D QC-time-services: Daemon:genoff_post_init:Error in accessing storage
- 02-01 21:13:23.917 405 405 D QC-time-services: Daemon:genoff_pre_init::Base = 14
- 02-01 21:13:23.917 405 405 D QC-time-services: Daemon: Storage Name: ats_14
- 02-01 21:13:23.917 405 405 D QC-time-services: Daemon:Opening File: /data/time/ats_14
- 02-01 21:13:23.917 405 405 D QC-time-services: Daemon:time_persistent_memory_opr:Genoff Read operation
- 02-01 21:13:23.917 405 405 D QC-time-services: Daemon:Unable to open filefor read
- 02-01 21:13:23.917 405 405 D QC-time-services: Daemon:genoff_post_init:Error in accessing storage
- 02-01 21:13:23.917 405 405 D QC-time-services: Daemon:genoff_init_config: Other bases initilized, exiting genoff_init
- 02-01 21:13:23.917 405 405 D QC-time-services: Daemon:genoff_opr: Base = 1, val = 13185791043376720400, operation = 1
- 02-01 21:13:23.917 405 405 D QC-time-services: Daemon: genoff get for 1
- 02-01 21:13:23.917 405 405 D QC-time-services: Daemon:rtc_get: Time read from RTC -- MM/DD/YY HH:MM:SS1/1/70 21:13:24
- 02-01 21:13:23.917 405 405 D QC-time-services: Daemon:Value read from RTC seconds = 2754804000
- 02-01 21:13:23.917 405 405 D QC-time-services: Daemon:Value read from generic offset = 1385780527000
- 02-01 21:13:23.917 405 405 D QC-time-services: Daemon:Final Time = 1388535331000
- 02-01 21:13:23.928 475 475 I launch_daemonsu: (service) copying boot image backups from /cache to /data
- 02-01 21:13:23.933 405 405 D QC-time-services: Daemon:genoff_boot_tod_init: Setting system time to sec =1388535331, nsec =0
- 02-01 21:13:23.936 399 399 F libc : page record for 0xb6ed202c was not found (block_size=16)
- 02-01 21:13:23.940 0 0 I init : Service 'qcamerasvr' (pid 399) exited with status 1
- 02-01 21:13:23.940 0 0 I init : Service 'qcamerasvr' (pid 399) killing any children in process group
- 02-01 21:13:23.952 0 0 I alarm_set_rtc: Failed to set RTC, time will be lost on reboot
- 02-01 21:13:23.959 0 0 E pil-q6v5-mss fc880000.qcom,mss: mba: Failed to locate mba.mdt
- 02-01 21:13:23.959 0 0 E modem_notifier_cb: sysmon_send_event error -19
- 02-01 21:13:23.959 0 0 E M-Notify: General: 5
- 02-01 21:13:23.959 0 0 E msm_ipc_load_default_node: Failed to load modem
- 02-01 21:13:23.961 0 0 E pil-q6v5-mss fc880000.qcom,mss: mba: Failed to locate mba.mdt
- 02-01 21:13:23.961 0 0 E modem_notifier_cb: sysmon_send_event error -19
- 02-01 21:13:23.961 0 0 E M-Notify: General: 5
- 02-01 21:13:23.961 0 0 E msm_ipc_load_default_node: Failed to load modem
- 01-01 00:15:31.000 405 405 E QC-time-services: Daemon:genoff_boot_tod_init: Unable to set TOD at boot up
- 01-01 00:15:31.000 405 405 E QC-time-services: Daemon: Unable to set TOD at boot up
- 01-01 00:15:31.000 405 405 D QC-time-services: Daemon:genoff_modem_qmi_init: Initiallizing QMI
- 01-01 00:15:31.007 405 405 E use-Rlog/RLOG-RIL-QMI: qmi_client [405]: unable to bind to client socket, rc = -1 errno[13:Permission denied]
- 01-01 00:15:31.007 405 405 E use-Rlog/RLOG-RIL-QMI: qmi_qmux_if_pwr_up_init_ex: Initialization failed, rc = -1
- 01-01 00:15:31.007 405 405 E QMI_FW : QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
- 01-01 00:15:31.007 405 405 E use-Rlog/RLOG-RIL-QMI: qmi_client [405]: unable to bind to client socket, rc = -1 errno[13:Permission denied]
- 01-01 00:15:31.007 405 405 E use-Rlog/RLOG-RIL-QMI: qmi_qmux_if_pwr_up_init_ex: Initialization failed, rc = -1
- 01-01 00:15:31.007 405 405 E QMI_FW : QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
- 01-01 00:15:31.007 405 405 E use-Rlog/RLOG-RIL-QMI: qmi_client [405]: unable to bind to client socket, rc = -1 errno[13:Permission denied]
- 01-01 00:15:31.007 405 405 E use-Rlog/RLOG-RIL-QMI: qmi_qmux_if_pwr_up_init_ex: Initialization failed, rc = -1
- 01-01 00:15:31.007 405 405 E QMI_FW : QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
- 01-01 00:15:31.007 405 405 E use-Rlog/RLOG-RIL-QMI: qmi_client [405]: unable to bind to client socket, rc = -1 errno[13:Permission denied]
- 01-01 00:15:31.007 405 405 E use-Rlog/RLOG-RIL-QMI: qmi_qmux_if_pwr_up_init_ex: Initialization failed, rc = -1
- 01-01 00:15:31.007 405 405 E QMI_FW : QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
- 01-01 00:15:31.009 405 405 E use-Rlog/RLOG-RIL-QMI: qmi_client [405]: unable to bind to client socket, rc = -1 errno[13:Permission denied]
- 01-01 00:15:31.009 405 405 E use-Rlog/RLOG-RIL-QMI: qmi_qmux_if_pwr_up_init_ex: Initialization failed, rc = -1
- 01-01 00:15:31.009 405 405 E QMI_FW : QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
- 01-01 00:15:31.009 405 405 E use-Rlog/RLOG-RIL-QMI: qmi_client [405]: unable to bind to client socket, rc = -1 errno[13:Permission denied]
- 01-01 00:15:31.009 405 405 E use-Rlog/RLOG-RIL-QMI: qmi_qmux_if_pwr_up_init_ex: Initialization failed, rc = -1
- 01-01 00:15:31.009 405 405 E QMI_FW : QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
- 01-01 00:15:31.009 405 405 E use-Rlog/RLOG-RIL-QMI: qmi_client [405]: unable to bind to client socket, rc = -1 errno[13:Permission denied]
- 01-01 00:15:31.009 405 405 E use-Rlog/RLOG-RIL-QMI: qmi_qmux_if_pwr_up_init_ex: Initialization failed, rc = -1
- 01-01 00:15:31.009 405 405 E QMI_FW : QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
- 01-01 00:15:31.009 405 405 E use-Rlog/RLOG-RIL-QMI: qmi_client [405]: unable to bind to client socket, rc = -1 errno[13:Permission denied]
- 01-01 00:15:31.009 405 405 E use-Rlog/RLOG-RIL-QMI: qmi_qmux_if_pwr_up_init_ex: Initialization failed, rc = -1
- 01-01 00:15:31.009 405 405 E QMI_FW : QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
- 01-01 00:15:31.009 405 405 E QC-time-services: Daemon:genoff_modem_qmi_init: qmi_client_get_service_list returned -2num_services 0
- 01-01 00:15:31.012 383 383 I SurfaceFlinger: SurfaceFlinger is starting
- 01-01 00:15:31.012 383 383 I SurfaceFlinger: SurfaceFlinger's main thread ready to run. Initializing graphics H/W...
- 01-01 00:15:31.042 383 383 D libEGL : loaded /vendor/lib/egl/libEGL_adreno.so
- 02-01 21:13:23.999 0 0 I usb : : dwc3_gadget_reset_interrupt
- 01-01 00:15:31.047 383 383 D libEGL : loaded /vendor/lib/egl/libGLESv1_CM_adreno.so
- 01-01 00:15:31.050 266 274 I auditd : type=1325 audit(0.0:15): table=filter family=2 entries=4
- 01-01 00:15:31.050 274 274 W auditd : type=1325 audit(0.0:15): table=filter family=2 entries=4
- 01-01 00:15:31.050 266 274 I auditd : type=1320 audit(0.0:15):
- 01-01 00:15:31.050 274 274 W auditd : type=1320 audit(0.0:15):
- 01-01 00:15:31.060 266 274 I auditd : type=1325 audit(0.0:16): table=filter family=10 entries=4
- 01-01 00:15:31.060 274 274 W auditd : type=1325 audit(0.0:16): table=filter family=10 entries=4
- 01-01 00:15:31.060 266 274 I auditd : type=1320 audit(0.0:16):
- 01-01 00:15:31.060 274 274 W auditd : type=1320 audit(0.0:16):
- 01-01 00:15:31.080 266 274 I auditd : type=1325 audit(0.0:17): table=filter family=2 entries=6
- 01-01 00:15:31.080 274 274 W auditd : type=1325 audit(0.0:17): table=filter family=2 entries=6
- 01-01 00:15:31.080 266 274 I auditd : type=1320 audit(0.0:17):
- 01-01 00:15:31.080 274 274 W auditd : type=1320 audit(0.0:17):
- 02-01 21:13:24.049 0 0 I usb : : dwc3_gadget_conndone_interrupt (HS)
- 01-01 00:15:31.090 266 274 I auditd : type=1325 audit(0.0:18): table=filter family=10 entries=6
- 01-01 00:15:31.090 274 274 W auditd : type=1325 audit(0.0:18): table=filter family=10 entries=6
- 01-01 00:15:31.090 266 274 I auditd : type=1320 audit(0.0:18):
- 01-01 00:15:31.090 274 274 W auditd : type=1320 audit(0.0:18):
- 02-01 21:13:24.059 0 0 I android_work: android_work: did not send uevent (0 0 (null))
- 01-01 00:15:31.143 383 383 D libEGL : loaded /vendor/lib/egl/libGLESv2_adreno.so
- 01-01 00:15:31.171 383 383 I Adreno-EGL: <qeglDrvAPI_eglInitialize:379>: EGL 1.4 QUALCOMM build: (Ia10634f51b)
- 01-01 00:15:31.171 383 383 I Adreno-EGL: OpenGL ES Shader Compiler Version: E031.29.00.00
- 01-01 00:15:31.171 383 383 I Adreno-EGL: Build Date: 01/28/16 Thu
- 01-01 00:15:31.171 383 383 I Adreno-EGL: Local Branch: ss
- 01-01 00:15:31.171 383 383 I Adreno-EGL: Remote Branch:
- 01-01 00:15:31.171 383 383 I Adreno-EGL: Local Patches:
- 01-01 00:15:31.171 383 383 I Adreno-EGL: Reconstruct Branch:
- 02-01 21:13:24.132 0 0 D usb : GET_DES
- 02-01 21:13:24.132 0 0 I android_work: android_work: sent uevent USB_STATE=CONNECTED
- 01-01 00:15:31.190 266 274 I auditd : type=1325 audit(0.0:19): table=filter family=2 entries=7
- 01-01 00:15:31.190 274 274 W auditd : type=1325 audit(0.0:19): table=filter family=2 entries=7
- 01-01 00:15:31.190 266 274 I auditd : type=1320 audit(0.0:19):
- 01-01 00:15:31.190 274 274 W auditd : type=1320 audit(0.0:19):
- 01-01 00:15:31.207 527 527 I launch_daemonsu: (service) loopsetup(/data/su.img):
- 02-01 21:13:24.161 0 0 D usb : GET_DES
- 02-01 21:13:24.161 0 0 D usb : set_config_number single config num=0
- 02-01 21:13:24.161 0 0 D usb : set_interface_count next_interface_id=4
- 02-01 21:13:24.164 0 0 D usb : GET_DES
- 02-01 21:13:24.165 0 0 D usb : set_config_number single config num=0
- 02-01 21:13:24.165 0 0 D usb : set_interface_count next_interface_id=4
- 02-01 21:13:24.165 0 0 D usb : set_config_number single config num=0
- 02-01 21:13:24.165 0 0 D usb : set_interface_count next_interface_id=4
- 02-01 21:13:24.165 0 0 I android_usb gadget: high-speed config #1: fe8050c8.android_usb
- 02-01 21:13:24.165 0 0 D : acm ttyGS0 serial state 0000
- 02-01 21:13:24.165 0 0 D usb : SET_CON
- 02-01 21:13:24.165 0 0 D usb : set_config_number single config num=0
- 01-01 00:15:31.220 266 274 I auditd : type=1325 audit(0.0:20): table=filter family=10 entries=7
- 01-01 00:15:31.220 274 274 W auditd : type=1325 audit(0.0:20): table=filter family=10 entries=7
- 01-01 00:15:31.220 266 274 I auditd : type=1320 audit(0.0:20):
- 01-01 00:15:31.220 274 274 W auditd : type=1320 audit(0.0:20):
- 01-01 00:15:31.230 266 274 I auditd : type=1325 audit(0.0:21): table=filter family=2 entries=9
- 01-01 00:15:31.230 274 274 W auditd : type=1325 audit(0.0:21): table=filter family=2 entries=9
- 01-01 00:15:31.230 266 274 I auditd : type=1320 audit(0.0:21):
- 01-01 00:15:31.230 274 274 W auditd : type=1320 audit(0.0:21):
- 01-01 00:15:31.240 266 274 I auditd : type=1325 audit(0.0:22): table=filter family=10 entries=9
- 01-01 00:15:31.240 274 274 W auditd : type=1325 audit(0.0:22): table=filter family=10 entries=9
- 01-01 00:15:31.240 266 274 I auditd : type=1320 audit(0.0:22):
- 01-01 00:15:31.240 274 274 W auditd : type=1320 audit(0.0:22):
- 02-01 21:13:24.219 0 0 I android_work: android_work: sent uevent USB_STATE=CONFIGURED
- 01-01 00:15:31.271 383 383 E qdutils : Error retrieving MDP revision and pipes info
- 01-01 00:15:31.271 383 383 D qdoverlay: initoverlay:: opening the device:: /dev/graphics/fb0
- 01-01 00:15:31.271 383 383 E qdoverlay: ERROR: MSMFB_MIXER_INFO ioctl failed
- 01-01 00:15:31.271 383 383 D qdoverlay: initoverlay:: opening the device:: /dev/graphics/fb0
- 01-01 00:15:31.271 383 383 E qdoverlay: ERROR: MSMFB_MIXER_INFO ioctl failed
- 02-01 21:13:24.224 0 0 I mdss_fb_blank_sub: FB_NUM:0, MDSS_FB_UNBLANK ++
- 02-01 21:13:24.224 0 0 I mdss_mdp_overlay_on: mdss_mdp_overlay_on: ++
- 02-01 21:13:24.224 0 0 I mdss_mdp_overlay_on: mdss_mdp_overlay_on: --
- 02-01 21:13:24.224 0 0 I mdss_fb_set_backlight: [BL1] bkl_lvl (0), bl_updated(1), power(1)
- 02-01 21:13:24.224 0 0 I mdss_fb_blank_sub: FB_NUM:0, MDSS_FB_UNBLANK --
- 02-01 21:13:24.224 0 0 I mdss_fb_blank_sub: FB_NUM:0, MDSS_FB_UNBLANK ++
- 02-01 21:13:24.224 0 0 I mdss_fb_blank_sub: FB_NUM:0, MDSS_FB_UNBLANK --
- 02-01 21:13:24.224 0 0 E mdss_fb_ioctl: unsupported ioctl (c0586d94)
- 02-01 21:13:24.224 0 0 E mdss_fb_ioctl: unsupported ioctl (c0586d94)
- 01-01 00:15:31.274 383 383 I qdhwcomposer: Initializing Qualcomm Hardware Composer
- 01-01 00:15:31.274 383 383 I qdhwcomposer: MDP version: 0
- 01-01 00:15:31.274 383 383 I SurfaceFlinger: Using composer version 1.3
- 01-01 00:15:31.274 383 383 I qdhwcomposer: hwc_registerProcs
- 01-01 00:15:31.274 383 383 I qdhwcomposer: Initializing UEVENT Thread
- 01-01 00:15:31.274 383 383 I qdhwcomposer: Initializing VSYNC Thread
- 01-01 00:15:31.274 383 383 D qdhwcomposer: hwc_getDisplayAttributes disp = 0, width = 1080
- 01-01 00:15:31.274 383 383 D qdhwcomposer: hwc_getDisplayAttributes disp = 0, height = 1920
- 01-01 00:15:31.276 383 540 I qdhwcomposer: vsync_loop: Reading vsync for dpy=0 from /sys/class/graphics/fb0/vsync_event
- 01-01 00:15:31.276 383 540 I qdhwcomposer: vsync_loop: Reading vsync for dpy=1 from /sys/class/graphics/fb1/vsync_event
- 01-01 00:15:31.278 383 383 I SurfaceFlinger: EGL information:
- 01-01 00:15:31.278 383 383 I SurfaceFlinger: vendor : Android
- 01-01 00:15:31.278 383 383 I SurfaceFlinger: version : 1.4 Android META-EGL
- 01-01 00:15:31.278 383 383 I SurfaceFlinger: extensions: EGL_KHR_get_all_proc_addresses EGL_ANDROID_presentation_time EGL_KHR_swap_buffers_with_damage EGL_KHR_image EGL_KHR_image_base EGL_KHR_lock_surface EGL_KHR_gl_texture_2D_image EGL_KHR_gl_texture_3D_image EGL_KHR_gl_texture_cubemap_image EGL_KHR_gl_renderbuffer_image EGL_KHR_fence_sync EGL_KHR_create_context EGL_EXT_create_context_robustness EGL_ANDROID_image_native_buffer EGL_KHR_wait_sync EGL_ANDROID_recordable EGL_KHR_partial_update
- 01-01 00:15:31.278 383 383 I SurfaceFlinger: Client API: OpenGL_ES
- 01-01 00:15:31.278 383 383 I SurfaceFlinger: EGLSurface: 8-8-8-8, config=0x5
- 01-01 00:15:31.279 383 383 I SurfaceFlinger: OpenGL ES informations:
- 01-01 00:15:31.279 383 383 I SurfaceFlinger: vendor : Qualcomm
- 01-01 00:15:31.279 383 383 I SurfaceFlinger: renderer : Adreno (TM) 330
- 01-01 00:15:31.279 383 383 I SurfaceFlinger: version : OpenGL ES 3.0 V@140.0 AU@ (GIT@Ia10634f51b)
- 01-01 00:15:31.279 383 383 I SurfaceFlinger: extensions: GL_AMD_compressed_ATC_texture GL_AMD_performance_monitor GL_AMD_program_binary_Z400 GL_EXT_debug_label GL_EXT_debug_marker GL_EXT_discard_framebuffer GL_EXT_robustness GL_EXT_texture_format_BGRA8888 GL_EXT_texture_type_2_10_10_10_REV GL_NV_fence GL_OES_compressed_ETC1_RGB8_texture GL_OES_depth_texture GL_OES_depth24 GL_OES_EGL_image GL_OES_EGL_sync GL_OES_EGL_image_external GL_OES_element_index_uint GL_OES_fbo_render_mipmap GL_OES_fragment_precision_high GL_OES_get_program_binary GL_OES_packed_depth_stencil GL_OES_depth_texture_cube_map GL_OES_rgb8_rgba8 GL_OES_standard_derivatives GL_OES_texture_3D GL_OES_texture_float GL_OES_texture_half_float GL_OES_texture_half_float_linear GL_OES_texture_npot GL_OES_vertex_half_float GL_OES_vertex_type_10_10_10_2 GL_OES_vertex_array_object GL_QCOM_alpha_test GL_QCOM_binning_control GL_QCOM_driver_control GL_QCOM_perfmon_global_mode GL_QCOM_extended_get GL_QCOM_extended_get2 GL_QCOM_tiled_rendering GL_QCOM_writeonly_rendering GL_EXT_sRGB GL_EXT_sRGB_write_con
- 01-01 00:15:31.279 383 383 I SurfaceFlinger: GL_MAX_TEXTURE_SIZE = 4096
- 01-01 00:15:31.279 383 383 I SurfaceFlinger: GL_MAX_VIEWPORT_DIMS = 4096
- 01-01 00:15:31.283 383 383 I SurfaceFlinger: EGL information:
- 01-01 00:15:31.283 383 383 I SurfaceFlinger: vendor : Android
- 01-01 00:15:31.283 383 383 I SurfaceFlinger: version : 1.4 Android META-EGL
- 01-01 00:15:31.283 383 383 I SurfaceFlinger: extensions: EGL_KHR_get_all_proc_addresses EGL_ANDROID_presentation_time EGL_KHR_swap_buffers_with_damage EGL_KHR_image EGL_KHR_image_base EGL_KHR_lock_surface EGL_KHR_gl_texture_2D_image EGL_KHR_gl_texture_3D_image EGL_KHR_gl_texture_cubemap_image EGL_KHR_gl_renderbuffer_image EGL_KHR_fence_sync EGL_KHR_create_context EGL_EXT_create_context_robustness EGL_ANDROID_image_native_buffer EGL_KHR_wait_sync EGL_ANDROID_recordable EGL_KHR_partial_update
- 01-01 00:15:31.283 383 383 I SurfaceFlinger: Client API: OpenGL_ES
- 01-01 00:15:31.283 383 383 I SurfaceFlinger: EGLSurface: 8-8-8-8, config=0x5
- 01-01 00:15:31.287 383 383 D SurfaceFlinger: Set power mode=2, type=0 flinger=0xb6a64000
- 01-01 00:15:31.287 383 383 D qdhwcomposer: hwc_blank: Unblanking display: 0
- 01-01 00:15:31.287 383 383 D qdhwcomposer: hwc_blank: Done unblanking display: 0
- 02-01 21:13:24.240 0 0 I init : Starting service 'bootanim'...
- 02-01 21:13:24.240 0 0 I mdss_fb_blank_sub: FB_NUM:0, MDSS_FB_UNBLANK ++
- 02-01 21:13:24.240 0 0 I mdss_fb_blank_sub: FB_NUM:0, MDSS_FB_UNBLANK --
- 01-01 00:15:31.353 393 393 V MediaUtils: physMem: 2905329664
- 01-01 00:15:31.353 393 393 V MediaUtils: requested limit: 1888464240
- 01-01 00:15:31.353 393 393 V MediaUtils: actual limit: 1888464240
- 01-01 00:15:31.353 393 393 V MediaUtils: original limits: 4294967295/4294967295
- 01-01 00:15:31.353 393 393 V MediaUtils: new limits: 1888464240/4294967295
- 01-01 00:15:31.362 393 393 I mediaserver: ServiceManager: 0xb600e120
- 01-01 00:15:31.362 393 393 I AudioFlinger: Using default 3000 mSec as standby time.
- 01-01 00:15:31.363 393 393 E : batterystats service unavailable!
- 01-01 00:15:31.363 393 393 E : batterystats service unavailable!
- 01-01 00:15:31.363 393 393 I CameraService: CameraService started (pid=393)
- 01-01 00:15:31.363 393 393 I CameraService: CameraService process starting
- 01-01 00:15:31.363 393 393 E : batterystats service unavailable!
- 01-01 00:15:31.363 393 393 E : batterystats service unavailable!
- 01-01 00:15:31.350 266 274 I auditd : type=1325 audit(0.0:23): table=filter family=2 entries=10
- 01-01 00:15:31.350 274 274 W auditd : type=1325 audit(0.0:23): table=filter family=2 entries=10
- 01-01 00:15:31.350 266 274 I auditd : type=1320 audit(0.0:23):
- 01-01 00:15:31.350 274 274 W auditd : type=1320 audit(0.0:23):
- 01-01 00:15:31.371 393 393 E HAL : load: module=/system/lib/hw/camera.vendor.msm8974.so
- 01-01 00:15:31.371 393 393 E HAL : dlopen failed: library "libstlport.so" not found
- 01-01 00:15:31.371 393 393 E CameraWrapper: Failed to open vendor camera module -22
- 01-01 00:15:31.371 393 393 I CameraService: Loaded "MSM8974 Camera Wrapper" camera module
- 01-01 00:15:31.373 393 393 E HAL : load: module=/system/lib/hw/camera.vendor.msm8974.so
- 01-01 00:15:31.373 393 393 E HAL : dlopen failed: library "libstlport.so" not found
- 01-01 00:15:31.373 393 393 E CameraWrapper: Failed to open vendor camera module -22
- 01-01 00:15:31.375 393 393 E HAL : load: module=/system/lib/hw/camera.vendor.msm8974.so
- 01-01 00:15:31.375 393 393 E HAL : dlopen failed: library "libstlport.so" not found
- 01-01 00:15:31.375 393 393 E CameraWrapper: Failed to open vendor camera module -22
- 01-01 00:15:31.375 393 393 I ServiceManager: Waiting for service media.camera.proxy...
- 01-01 00:15:31.370 266 274 I auditd : type=1325 audit(0.0:24): table=filter family=10 entries=10
- 01-01 00:15:31.370 274 274 W auditd : type=1325 audit(0.0:24): table=filter family=10 entries=10
- 01-01 00:15:31.370 266 274 I auditd : type=1320 audit(0.0:24):
- 01-01 00:15:31.370 274 274 W auditd : type=1320 audit(0.0:24):
- 01-01 00:15:31.385 545 553 D libEGL : loaded /vendor/lib/egl/libEGL_adreno.so
- 01-01 00:15:31.386 545 553 D libEGL : loaded /vendor/lib/egl/libGLESv1_CM_adreno.so
- 01-01 00:15:31.380 266 274 I auditd : type=1325 audit(0.0:25): table=filter family=2 entries=12
- 01-01 00:15:31.380 274 274 W auditd : type=1325 audit(0.0:25): table=filter family=2 entries=12
- 01-01 00:15:31.380 266 274 I auditd : type=1320 audit(0.0:25):
- 01-01 00:15:31.380 274 274 W auditd : type=1320 audit(0.0:25):
- 01-01 00:15:31.400 545 553 D libEGL : loaded /vendor/lib/egl/libGLESv2_adreno.so
- 01-01 00:15:31.407 545 553 I Adreno-EGL: <qeglDrvAPI_eglInitialize:379>: EGL 1.4 QUALCOMM build: (Ia10634f51b)
- 01-01 00:15:31.407 545 553 I Adreno-EGL: OpenGL ES Shader Compiler Version: E031.29.00.00
- 01-01 00:15:31.407 545 553 I Adreno-EGL: Build Date: 01/28/16 Thu
- 01-01 00:15:31.407 545 553 I Adreno-EGL: Local Branch: ss
- 01-01 00:15:31.407 545 553 I Adreno-EGL: Remote Branch:
- 01-01 00:15:31.407 545 553 I Adreno-EGL: Local Patches:
- 01-01 00:15:31.407 545 553 I Adreno-EGL: Reconstruct Branch:
- 01-01 00:15:31.410 266 274 I auditd : type=1325 audit(0.0:26): table=filter family=10 entries=12
- 01-01 00:15:31.410 274 274 W auditd : type=1325 audit(0.0:26): table=filter family=10 entries=12
- 01-01 00:15:31.410 266 274 I auditd : type=1320 audit(0.0:26):
- 01-01 00:15:31.410 274 274 W auditd : type=1320 audit(0.0:26):
- 01-01 00:15:31.446 383 486 E qdmemalloc: ION_IOC_ALLOC failed with error - No such device
- 01-01 00:15:31.446 383 486 E qdgralloc: gralloc failed for eDataErr=No such device
- 01-01 00:15:31.447 545 553 E Parcel : dup() failed in Parcel::read, i is 1, fds[i] is -1, fd_count is 2, error: Bad file descriptor
- 01-01 00:15:31.447 545 553 E Surface : dequeueBuffer: IGraphicBufferProducer::requestBuffer failed: -22
- 01-01 00:15:31.447 545 553 W Adreno-EGLSUB: <DequeueBuffer:721>: dequeue native buffer fail: Invalid argument, buffer=0x0, handle=0x0
- 01-01 00:15:31.447 545 553 W Adreno-EGL: <qeglDrvAPI_eglSwapBuffers:3800>: EGL_BAD_SURFACE
- 01-01 00:15:31.462 545 553 E Parcel : dup() failed in Parcel::read, i is 1, fds[i] is -1, fd_count is 2, error: Bad file descriptor
- 01-01 00:15:31.462 545 553 E Surface : dequeueBuffer: IGraphicBufferProducer::requestBuffer failed: -22
- 01-01 00:15:31.462 545 553 W Adreno-EGLSUB: <DequeueBuffer:721>: dequeue native buffer fail: Invalid argument, buffer=0x0, handle=0x0
- 01-01 00:15:31.462 545 553 W Adreno-EGL: <qeglDrvAPI_eglSwapBuffers:3800>: EGL_BAD_SURFACE
- 02-01 21:13:24.428 0 0 I init : Service 'bootanim' (pid 545) exited with status 0
- 01-01 00:15:31.510 266 274 I auditd : type=1325 audit(0.0:27): table=filter family=2 entries=13
- 01-01 00:15:31.510 274 274 W auditd : type=1325 audit(0.0:27): table=filter family=2 entries=13
- 01-01 00:15:31.510 266 274 I auditd : type=1320 audit(0.0:27):
- 01-01 00:15:31.510 274 274 W auditd : type=1320 audit(0.0:27):
- 01-01 00:15:31.520 266 274 I auditd : type=1325 audit(0.0:28): table=filter family=10 entries=13
- 01-01 00:15:31.520 274 274 W auditd : type=1325 audit(0.0:28): table=filter family=10 entries=13
- 01-01 00:15:31.520 266 274 I auditd : type=1320 audit(0.0:28):
- 01-01 00:15:31.520 274 274 W auditd : type=1320 audit(0.0:28):
- 01-01 00:15:31.530 266 274 I auditd : type=1325 audit(0.0:29): table=filter family=2 entries=15
- 01-01 00:15:31.530 274 274 W auditd : type=1325 audit(0.0:29): table=filter family=2 entries=15
- 01-01 00:15:31.530 266 274 I auditd : type=1320 audit(0.0:29):
- 01-01 00:15:31.530 274 274 W auditd : type=1320 audit(0.0:29):
- 02-01 21:13:24.508 0 0 W audit : audit_lost=1 audit_rate_limit=20 audit_backlog_limit=64
- 02-01 21:13:24.508 0 0 E audit : rate limit exceeded
- 01-01 00:15:31.744 383 383 D SurfaceFlinger: shader cache generated - 24 shaders in 156.685425 ms
- 01-01 00:15:31.746 383 383 E qdmemalloc: ION_IOC_ALLOC failed with error - No such device
- 01-01 00:15:31.746 383 383 E qdgralloc: gralloc failed for eDataErr=No such device
- 01-01 00:15:31.750 383 383 E qdhwcomposer: display_commit: MSMFB_DISPLAY_COMMIT for primary failed
- 01-01 00:15:31.750 383 383 E qdhwcomposer: hwc_set_primary: display commit fail!
- 01-01 00:15:31.750 383 383 D qdutils : DEBUG_CALC_FPS: 0
- 01-01 00:15:31.750 383 383 D qdutils : period: 10
- 01-01 00:15:31.750 383 383 D qdutils : ignorethresh_us: 500000
- 02-01 21:13:24.703 0 0 E mdss_fb_ioctl: unsupported ioctl (40a86da4)
- 01-01 00:15:31.769 401 401 D AndroidRuntime: >>>>>> START com.android.internal.os.ZygoteInit uid 0 <<<<<<
- 01-01 00:15:31.769 401 401 I boot_progress_start: 69163
- 01-01 00:15:31.769 401 401 W JniInvocation: Falling back from libart to libart.so after dlopen error: dlopen failed: library "libart" not found
- 01-01 00:15:31.798 401 401 D AndroidRuntime: CheckJNI is OFF
- 01-01 00:15:31.808 401 401 I art : option[0]=-Xzygote
- 01-01 00:15:31.808 401 401 I art : option[1]=-Xstacktracefile:/data/anr/traces.txt
- 01-01 00:15:31.808 401 401 I art : option[2]=exit
- 01-01 00:15:31.808 401 401 I art : option[3]=vfprintf
- 01-01 00:15:31.808 401 401 I art : option[4]=sensitiveThread
- 01-01 00:15:31.808 401 401 I art : option[5]=-verbose:gc
- 01-01 00:15:31.808 401 401 I art : option[6]=-Xms8m
- 01-01 00:15:31.808 401 401 I art : option[7]=-Xmx512m
- 01-01 00:15:31.808 401 401 I art : option[8]=-XX:HeapGrowthLimit=192m
- 01-01 00:15:31.808 401 401 I art : option[9]=-XX:HeapMinFree=512k
- 01-01 00:15:31.808 401 401 I art : option[10]=-XX:HeapMaxFree=8m
- 01-01 00:15:31.808 401 401 I art : option[11]=-XX:HeapTargetUtilization=0.75
- 01-01 00:15:31.808 401 401 I art : option[12]=-agentlib:jdwp=transport=dt_android_adb,suspend=n,server=y
- 01-01 00:15:31.808 401 401 I art : option[13]=-Xlockprofthreshold:500
- 01-01 00:15:31.808 401 401 I art : option[14]=-Ximage-compiler-option
- 01-01 00:15:31.808 401 401 I art : option[15]=--runtime-arg
- 01-01 00:15:31.808 401 401 I art : option[16]=-Ximage-compiler-option
- 01-01 00:15:31.808 401 401 I art : option[17]=-Xms64m
- 01-01 00:15:31.808 401 401 I art : option[18]=-Ximage-compiler-option
- 01-01 00:15:31.808 401 401 I art : option[19]=--runtime-arg
- 01-01 00:15:31.808 401 401 I art : option[20]=-Ximage-compiler-option
- 01-01 00:15:31.808 401 401 I art : option[21]=-Xmx64m
- 01-01 00:15:31.808 401 401 I art : option[22]=-Ximage-compiler-option
- 01-01 00:15:31.808 401 401 I art : option[23]=--image-classes=/system/etc/preloaded-classes
- 01-01 00:15:31.808 401 401 I art : option[24]=-Xcompiler-option
- 01-01 00:15:31.808 401 401 I art : option[25]=--runtime-arg
- 01-01 00:15:31.808 401 401 I art : option[26]=-Xcompiler-option
- 01-01 00:15:31.808 401 401 I art : option[27]=-Xms64m
- 01-01 00:15:31.809 401 401 I art : option[28]=-Xcompiler-option
- 01-01 00:15:31.809 401 401 I art : option[29]=--runtime-arg
- 01-01 00:15:31.809 401 401 I art : option[30]=-Xcompiler-option
- 01-01 00:15:31.809 401 401 I art : option[31]=-Xmx512m
- 01-01 00:15:31.809 401 401 I art : option[32]=-Ximage-compiler-option
- 01-01 00:15:31.809 401 401 I art : option[33]=--instruction-set-variant=krait
- 01-01 00:15:31.809 401 401 I art : option[34]=-Xcompiler-option
- 01-01 00:15:31.809 401 401 I art : option[35]=--instruction-set-variant=krait
- 01-01 00:15:31.809 401 401 I art : option[36]=-Ximage-compiler-option
- 01-01 00:15:31.809 401 401 I art : option[37]=--instruction-set-features=default
- 01-01 00:15:31.809 401 401 I art : option[38]=-Xcompiler-option
- 01-01 00:15:31.809 401 401 I art : option[39]=--instruction-set-features=default
- 01-01 00:15:31.809 401 401 I art : option[40]=-Duser.locale=en-US
- 01-01 00:15:31.809 401 401 I art : option[41]=--cpu-abilist=armeabi-v7a,armeabi
- 01-01 00:15:31.809 401 401 I art : option[42]=-Xfingerprint:Android/aosp_js01ltedcm/js01ltedcm:6.0.1/MOB31Z/root08090942:userdebug/test-keys
- 01-01 00:15:31.908 384 418 E use-Rlog/RLOG-RIL-QMI: qmi_client [384]: unable to connect to server, errno=[2:No such file or directory], attempt=2
- 01-01 00:15:32.034 401 401 D ICU : No timezone override file found: /data/misc/zoneinfo/current/icu/icu_tzdata.dat
- 01-01 00:15:32.193 401 401 I Radio-JNI: register_android_hardware_Radio DONE
- 01-01 00:15:32.216 401 401 I SamplingProfilerIntegration: Profiling disabled.
- 01-01 00:15:32.221 401 401 I boot_progress_preload_start: 69614
- 01-01 00:15:32.221 401 401 D Zygote : begin preload
- 01-01 00:15:32.229 401 401 I Zygote : Preloading classes...
- 01-01 00:15:32.230 266 274 I auditd : type=1325 audit(0.0:54): table=filter family=10 entries=33
- 01-01 00:15:32.230 274 274 W auditd : type=1325 audit(0.0:54): table=filter family=10 entries=33
- 01-01 00:15:32.230 266 274 I auditd : type=1320 audit(0.0:54):
- 01-01 00:15:32.230 274 274 W auditd : type=1320 audit(0.0:54):
- 01-01 00:15:32.261 637 637 I launch_daemonsu: (service) abort: mount failed
- 02-01 21:13:25.215 0 0 I init : Service 'daemonsu' (pid 406) exited with status 0
- 01-01 00:15:32.310 266 274 I auditd : type=1325 audit(0.0:55): table=raw family=2 entries=3
- 01-01 00:15:32.310 274 274 W auditd : type=1325 audit(0.0:55): table=raw family=2 entries=3
- 01-01 00:15:32.310 266 274 I auditd : type=1320 audit(0.0:55):
- 01-01 00:15:32.310 274 274 W auditd : type=1320 audit(0.0:55):
- 01-01 00:15:32.320 266 274 I auditd : type=1325 audit(0.0:56): table=raw family=10 entries=3
- 01-01 00:15:32.320 274 274 W auditd : type=1325 audit(0.0:56): table=raw family=10 entries=3
- 01-01 00:15:32.320 266 274 I auditd : type=1320 audit(0.0:56):
- 01-01 00:15:32.320 274 274 W auditd : type=1320 audit(0.0:56):
- 01-01 00:15:32.330 266 274 I auditd : type=1325 audit(0.0:57): table=raw family=2 entries=5
- 01-01 00:15:32.330 274 274 W auditd : type=1325 audit(0.0:57): table=raw family=2 entries=5
- 01-01 00:15:32.330 266 274 I auditd : type=1320 audit(0.0:57):
- 01-01 00:15:32.330 274 274 W auditd : type=1320 audit(0.0:57):
- 01-01 00:15:32.340 266 274 I auditd : type=1325 audit(0.0:58): table=raw family=10 entries=5
- 01-01 00:15:32.340 274 274 W auditd : type=1325 audit(0.0:58): table=raw family=10 entries=5
- 01-01 00:15:32.340 266 274 I auditd : type=1320 audit(0.0:58):
- 01-01 00:15:32.340 274 274 W auditd : type=1320 audit(0.0:58):
- 01-01 00:15:32.375 393 393 I ServiceManager: Waiting for service media.camera.proxy...
- 01-01 00:15:32.410 266 274 I auditd : type=1325 audit(0.0:59): table=raw family=2 entries=6
- 01-01 00:15:32.410 274 274 W auditd : type=1325 audit(0.0:59): table=raw family=2 entries=6
- 01-01 00:15:32.410 266 274 I auditd : type=1320 audit(0.0:59):
- 01-01 00:15:32.410 274 274 W auditd : type=1320 audit(0.0:59):
- 01-01 00:15:32.420 266 274 I auditd : type=1325 audit(0.0:60): table=raw family=10 entries=6
- 01-01 00:15:32.420 274 274 W auditd : type=1325 audit(0.0:60): table=raw family=10 entries=6
- 01-01 00:15:32.420 266 274 I auditd : type=1320 audit(0.0:60):
- 01-01 00:15:32.420 274 274 W auditd : type=1320 audit(0.0:60):
- 01-01 00:15:32.430 266 274 I auditd : type=1325 audit(0.0:61): table=raw family=2 entries=8
- 01-01 00:15:32.430 274 274 W auditd : type=1325 audit(0.0:61): table=raw family=2 entries=8
- 01-01 00:15:32.430 266 274 I auditd : type=1320 audit(0.0:61):
- 01-01 00:15:32.430 274 274 W auditd : type=1320 audit(0.0:61):
- 01-01 00:15:32.440 266 274 I auditd : type=1325 audit(0.0:62): table=raw family=10 entries=8
- 01-01 00:15:32.440 274 274 W auditd : type=1325 audit(0.0:62): table=raw family=10 entries=8
- 01-01 00:15:32.440 266 274 I auditd : type=1320 audit(0.0:62):
- 01-01 00:15:32.440 274 274 W auditd : type=1320 audit(0.0:62):
- 01-01 00:15:32.515 401 401 E Minikin : addFont failed to create font /system/fonts/NanumGothic.ttf
- 01-01 00:15:32.515 401 401 E Minikin : addFont failed to create font /system/fonts/DroidSansFallback.ttf
- 01-01 00:15:32.515 401 401 E Minikin : addFont failed to create font /system/fonts/MTLmr3m.ttf
- 01-01 00:15:32.510 266 274 I auditd : type=1325 audit(0.0:63): table=mangle family=2 entries=6
- 01-01 00:15:32.510 274 274 W auditd : type=1325 audit(0.0:63): table=mangle family=2 entries=6
- 01-01 00:15:32.510 266 274 I auditd : type=1320 audit(0.0:63):
- 01-01 00:15:32.510 274 274 W auditd : type=1320 audit(0.0:63):
- 01-01 00:15:32.590 401 401 V DngCreator_JNI: DngCreator_nativeClassInit:
- 02-01 21:13:25.571 0 0 D usb : set_config_number single config num=0
- 02-01 21:13:25.571 0 0 D usb : set_interface_count next_interface_id=4
- 02-01 21:13:25.571 0 0 D usb : set_config_number single config num=0
- 02-01 21:13:25.571 0 0 D usb : set_interface_count next_interface_id=4
- 02-01 21:13:25.578 0 0 W audit : audit_lost=55 audit_rate_limit=20 audit_backlog_limit=64
- 02-01 21:13:25.578 0 0 E audit : rate limit exceeded
- 01-01 00:15:32.722 401 401 I art : Thread[1,tid=401,Native,Thread*=0xb4d36500,peer=0x12c35100,"main"] recursive attempt to load library "/system/lib/libmedia_jni.so"
- 01-01 00:15:32.722 401 401 D MtpDeviceJNI: register_android_mtp_MtpDevice
- 01-01 00:15:32.722 401 401 I art : Thread[1,tid=401,Native,Thread*=0xb4d36500,peer=0x12c35100,"main"] recursive attempt to load library "/system/lib/libmedia_jni.so"
- 01-01 00:15:32.723 401 401 I art : Thread[1,tid=401,Native,Thread*=0xb4d36500,peer=0x12c35100,"main"] recursive attempt to load library "/system/lib/libmedia_jni.so"
- 01-01 00:15:32.728 401 401 F MediaProfiles: frameworks/av/media/libmedia/MediaProfiles.cpp:286 CHECK(codec != -1) failed.
- 01-01 00:15:32.728 401 401 F libc : Fatal signal 6 (SIGABRT), code -6 in tid 401 (main)
- 01-01 00:15:32.728 390 390 E : debuggerd: attached task 401 does not match request: expected pid=401,uid=0,gid=9999, actual pid=401,uid=0,gid=0
- 02-01 21:13:25.682 0 0 I init : Service 'debuggerd' (pid 390) exited with status 1
- 02-01 21:13:25.682 0 0 I init : Service 'debuggerd' (pid 390) killing any children in process group
- 01-01 00:15:32.908 384 418 E use-Rlog/RLOG-RIL-QMI: qmi_client [384]: unable to connect to server, errno=[2:No such file or directory], attempt=3
- 01-01 00:15:33.012 405 405 E use-Rlog/RLOG-RIL-QMI: qmi_client [405]: unable to bind to client socket, rc = -1 errno[13:Permission denied]
- 01-01 00:15:33.012 405 405 E use-Rlog/RLOG-RIL-QMI: qmi_qmux_if_pwr_up_init_ex: Initialization failed, rc = -1
- 01-01 00:15:33.012 405 405 E QMI_FW : QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
- 01-01 00:15:33.012 405 405 E use-Rlog/RLOG-RIL-QMI: qmi_client [405]: unable to bind to client socket, rc = -1 errno[13:Permission denied]
- 01-01 00:15:33.012 405 405 E use-Rlog/RLOG-RIL-QMI: qmi_qmux_if_pwr_up_init_ex: Initialization failed, rc = -1
- 01-01 00:15:33.012 405 405 E QMI_FW : QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
- 01-01 00:15:33.012 405 405 E use-Rlog/RLOG-RIL-QMI: qmi_client [405]: unable to bind to client socket, rc = -1 errno[13:Permission denied]
- 01-01 00:15:33.013 405 405 E use-Rlog/RLOG-RIL-QMI: qmi_qmux_if_pwr_up_init_ex: Initialization failed, rc = -1
- 01-01 00:15:33.013 405 405 E QMI_FW : QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
- 01-01 00:15:33.013 405 405 E use-Rlog/RLOG-RIL-QMI: qmi_client [405]: unable to bind to client socket, rc = -1 errno[13:Permission denied]
- 01-01 00:15:33.013 405 405 E use-Rlog/RLOG-RIL-QMI: qmi_qmux_if_pwr_up_init_ex: Initialization failed, rc = -1
- 01-01 00:15:33.013 405 405 E QMI_FW : QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
- 01-01 00:15:33.013 405 405 E QC-time-services: Daemon:genoff_modem_qmi_init: qmi_client_get_service_list returned -2num_services 0
- 02-01 21:13:25.965 0 0 E pil-q6v5-mss fc880000.qcom,mss: mba: Failed to locate mba.mdt
- 02-01 21:13:25.965 0 0 E modem_notifier_cb: sysmon_send_event error -19
- 02-01 21:13:25.965 0 0 E M-Notify: General: 5
- 02-01 21:13:25.965 0 0 E msm_ipc_load_default_node: Failed to load modem
- 01-01 00:15:33.057 389 389 V NatController: runCmd(/system/bin/iptables -w -F natctrl_FORWARD) res=0
- 01-01 00:15:33.067 389 389 V NatController: runCmd(/system/bin/iptables -w -A natctrl_FORWARD -j DROP) res=0
- 01-01 00:15:33.076 389 389 V NatController: runCmd(/system/bin/iptables -w -t nat -F natctrl_nat_POSTROUTING) res=0
- 01-01 00:15:33.085 389 389 V NatController: runCmd(/system/bin/iptables -w -F natctrl_tether_counters) res=1
- 01-01 00:15:33.095 389 389 V NatController: runCmd(/system/bin/iptables -w -X natctrl_tether_counters) res=1
- 01-01 00:15:33.105 389 389 V NatController: runCmd(/system/bin/iptables -w -N natctrl_tether_counters) res=0
- 01-01 00:15:33.114 389 389 V NatController: runCmd(/system/bin/iptables -w -t mangle -A natctrl_mangle_FORWARD -p tcp --tcp-flags SYN SYN -j TCPMSS --clamp-mss-to-pmtu) res=0
- 01-01 00:15:33.240 266 274 I auditd : type=1325 audit(0.0:102): table=raw family=2 entries=9
- 01-01 00:15:33.240 274 274 W auditd : type=1325 audit(0.0:102): table=raw family=2 entries=9
- 01-01 00:15:33.240 266 274 I auditd : type=1320 audit(0.0:102):
- 01-01 00:15:33.240 274 274 W auditd : type=1320 audit(0.0:102):
- 01-01 00:15:33.250 266 274 I auditd : type=1325 audit(0.0:103): table=raw family=10 entries=9
- 01-01 00:15:33.250 274 274 W auditd : type=1325 audit(0.0:103): table=raw family=10 entries=9
- 01-01 00:15:33.250 266 274 I auditd : type=1320 audit(0.0:103):
- 01-01 00:15:33.250 274 274 W auditd : type=1320 audit(0.0:103):
- 01-01 00:15:33.260 266 274 I auditd : type=1325 audit(0.0:104): table=mangle family=2 entries=16
- 01-01 00:15:33.260 274 274 W auditd : type=1325 audit(0.0:104): table=mangle family=2 entries=16
- 01-01 00:15:33.260 266 274 I auditd : type=1320 audit(0.0:104):
- 01-01 00:15:33.260 274 274 W auditd : type=1320 audit(0.0:104):
- 01-01 00:15:33.270 266 274 I auditd : type=1325 audit(0.0:105): table=mangle family=10 entries=12
- 01-01 00:15:33.270 274 274 W auditd : type=1325 audit(0.0:105): table=mangle family=10 entries=12
- 01-01 00:15:33.270 266 274 I auditd : type=1320 audit(0.0:105):
- 01-01 00:15:33.270 274 274 W auditd : type=1320 audit(0.0:105):
- 01-01 00:15:33.330 266 274 I auditd : type=1325 audit(0.0:106): table=filter family=2 entries=43
- 01-01 00:15:33.330 274 274 W auditd : type=1325 audit(0.0:106): table=filter family=2 entries=43
- 01-01 00:15:33.330 266 274 I auditd : type=1320 audit(0.0:106):
- 01-01 00:15:33.330 274 274 W auditd : type=1320 audit(0.0:106):
- 01-01 00:15:33.340 266 274 I auditd : type=1325 audit(0.0:107): table=filter family=10 entries=46
- 01-01 00:15:33.340 274 274 W auditd : type=1325 audit(0.0:107): table=filter family=10 entries=46
- 01-01 00:15:33.340 266 274 I auditd : type=1320 audit(0.0:107):
- 01-01 00:15:33.340 274 274 W auditd : type=1320 audit(0.0:107):
- 01-01 00:15:33.350 266 274 I auditd : type=1325 audit(0.0:108): table=filter family=2 entries=45
- 01-01 00:15:33.350 274 274 W auditd : type=1325 audit(0.0:108): table=filter family=2 entries=45
- 01-01 00:15:33.350 266 274 I auditd : type=1320 audit(0.0:108):
- 01-01 00:15:33.350 274 274 W auditd : type=1320 audit(0.0:108):
- 01-01 00:15:33.360 266 274 I auditd : type=1325 audit(0.0:109): table=filter family=10 entries=48
- 01-01 00:15:33.360 274 274 W auditd : type=1325 audit(0.0:109): table=filter family=10 entries=48
- 01-01 00:15:33.360 266 274 I auditd : type=1320 audit(0.0:109):
- 01-01 00:15:33.360 274 274 W auditd : type=1320 audit(0.0:109):
- 01-01 00:15:33.375 393 393 I ServiceManager: Waiting for service media.camera.proxy...
- 01-01 00:15:33.370 266 274 I auditd : type=1325 audit(0.0:110): table=filter family=2 entries=47
- 01-01 00:15:33.370 274 274 W auditd : type=1325 audit(0.0:110): table=filter family=2 entries=47
- 01-01 00:15:33.370 266 274 I auditd : type=1320 audit(0.0:110):
- 01-01 00:15:33.370 274 274 W auditd : type=1320 audit(0.0:110):
- 01-01 00:15:33.380 266 274 I auditd : type=1325 audit(0.0:111): table=filter family=10 entries=50
- 01-01 00:15:33.380 274 274 W auditd : type=1325 audit(0.0:111): table=filter family=10 entries=50
- 01-01 00:15:33.380 266 274 I auditd : type=1320 audit(0.0:111):
- 01-01 00:15:33.380 274 274 W auditd : type=1320 audit(0.0:111):
- 02-01 21:13:26.582 0 0 W audit : audit_lost=169 audit_rate_limit=20 audit_backlog_limit=64
- 02-01 21:13:26.582 0 0 E audit : rate limit exceeded
- 01-01 00:15:33.687 389 389 D MDnsDS : MDnsSdListener::Hander starting up
- 01-01 00:15:33.687 389 789 D MDnsDS : MDnsSdListener starting to monitor
- 01-01 00:15:33.687 389 789 D MDnsDS : Going to poll with pollCount 1
- 01-01 00:15:33.909 384 418 E use-Rlog/RLOG-RIL-QMI: qmi_client [384]: unable to connect to server, errno=[2:No such file or directory], attempt=4
- 01-01 00:15:34.376 393 393 I ServiceManager: Waiting for service media.camera.proxy...
- 02-01 21:13:27.839 0 0 I msm_thermal: msm_therm_temp_log Debug Temp for Sensor:
- 01-01 00:15:34.909 384 418 E use-Rlog/RLOG-RIL-QMI: qmi_client [384]: unable to connect to server, errno=[2:No such file or directory], attempt=5
- 01-01 00:15:35.014 405 405 E use-Rlog/RLOG-RIL-QMI: qmi_client [405]: unable to bind to client socket, rc = -1 errno[13:Permission denied]
- 01-01 00:15:35.014 405 405 E use-Rlog/RLOG-RIL-QMI: qmi_qmux_if_pwr_up_init_ex: Initialization failed, rc = -1
- 01-01 00:15:35.014 405 405 E QMI_FW : QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
- 01-01 00:15:35.014 405 405 E use-Rlog/RLOG-RIL-QMI: qmi_client [405]: unable to bind to client socket, rc = -1 errno[13:Permission denied]
- 01-01 00:15:35.014 405 405 E use-Rlog/RLOG-RIL-QMI: qmi_qmux_if_pwr_up_init_ex: Initialization failed, rc = -1
- 01-01 00:15:35.014 405 405 E QMI_FW : QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
- 01-01 00:15:35.014 405 405 E use-Rlog/RLOG-RIL-QMI: qmi_client [405]: unable to bind to client socket, rc = -1 errno[13:Permission denied]
- 01-01 00:15:35.014 405 405 E use-Rlog/RLOG-RIL-QMI: qmi_qmux_if_pwr_up_init_ex: Initialization failed, rc = -1
- 01-01 00:15:35.014 405 405 E QMI_FW : QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
- 01-01 00:15:35.015 405 405 E use-Rlog/RLOG-RIL-QMI: qmi_client [405]: unable to bind to client socket, rc = -1 errno[13:Permission denied]
- 01-01 00:15:35.015 405 405 E use-Rlog/RLOG-RIL-QMI: qmi_qmux_if_pwr_up_init_ex: Initialization failed, rc = -1
- 01-01 00:15:35.015 405 405 E QMI_FW : QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
- 01-01 00:15:35.015 405 405 E QC-time-services: Daemon:genoff_modem_qmi_init: qmi_client_get_service_list returned -2num_services 0
- 02-01 21:13:27.967 0 0 I msm_thermal: msm_therm_temp_log (0 --- 52)(1 --- 52)(2 --- 50)(3 --- 52)(4 --- 53)(5 --- 53)(6 --- 54)(7 --- 53)(8 --- 53)(9 --- 52)(10 --- 50)
- 02-01 21:13:27.967 0 0 E pil-q6v5-mss fc880000.qcom,mss: mba: Failed to locate mba.mdt
- 02-01 21:13:27.967 0 0 E modem_notifier_cb: sysmon_send_event error -19
- 02-01 21:13:27.967 0 0 E M-Notify: General: 5
- 02-01 21:13:27.967 0 0 E msm_ipc_load_default_node: Failed to load modem
- 01-01 00:15:35.376 393 393 I ServiceManager: Waiting for service media.camera.proxy...
- 02-01 21:13:28.685 0 0 I init : Starting service 'debuggerd'...
- 02-01 21:13:28.686 0 0 I init : Starting service 'ril-daemon'...
- 02-01 21:13:28.687 0 0 I init : Starting service 'keystore'...
- 02-01 21:13:28.687 0 0 E init : Warning! Service qcamerasvr needs a SELinux domain defined; please fix!
- 02-01 21:13:28.687 0 0 I init : Starting service 'qcamerasvr'...
- 02-01 21:13:28.688 0 0 E init : Warning! Service adsprpcd needs a SELinux domain defined; please fix!
- 02-01 21:13:28.688 0 0 I init : Starting service 'adsprpcd'...
- 01-01 00:15:35.740 795 795 F libc : page record for 0xb6f3002c was not found (block_size=16)
- 01-01 00:15:35.742 797 797 F libc : page record for 0xb6f7502c was not found (block_size=16)
- 01-01 00:15:35.745 798 798 E adsprpc : vendor/qcom/proprietary/adsprpc/src/fastrpc_apps_user.c:126:/dev/adsprpc-smd device initialization error: Operation not permitted
- 01-01 00:15:35.746 798 798 E adsprpc : vendor/qcom/proprietary/adsprpc/src/fastrpc_apps_user.c:179::error: -1: dev != -1
- 01-01 00:15:35.746 798 798 E adsprpc : vendor/qcom/proprietary/adsprpc/src/fastrpc_apps_user.c:224::error: -1: 0 == (nErr = remotectl_open(name, (int*)ph, dlerrstr, sizeof(dlerrstr), &dlerr))
- 01-01 00:15:35.746 798 798 E adsprpc : vendor/qcom/proprietary/adsprpc/src/fastrpc_apps_user.c:126:/dev/adsprpc-smd device initialization error: No such file or directory
- 02-01 21:13:28.694 0 0 I init : Service 'ril-daemon' (pid 795) exited with status 1
- 01-01 00:15:35.746 798 798 E adsprpc : vendor/qcom/proprietary/adsprpc/src/fastrpc_apps_user.c:179::error: -1: dev != -1
- 01-01 00:15:35.746 798 798 E adsprpc : vendor/qcom/proprietary/adsprpc/src/adsprpcd.c:23::error: -1: 0 == adsp_default_listener_register()
- 02-01 21:13:28.694 0 0 I init : Service 'ril-daemon' (pid 795) killing any children in process group
- 01-01 00:15:35.746 798 798 E adsprpc : vendor/qcom/proprietary/adsprpc/src/adsprpcd.c:36:adsprpcd exiting nErr=-1
- 01-01 00:15:35.746 794 794 I : debuggerd: starting
- 02-01 21:13:28.696 0 0 I init : Service 'qcamerasvr' (pid 797) exited with status 1
- 02-01 21:13:28.696 0 0 I init : Service 'qcamerasvr' (pid 797) killing any children in process group
- 02-01 21:13:28.699 0 0 I init : Service 'adsprpcd' (pid 798) exited with status 255
- 02-01 21:13:28.699 0 0 I init : Service 'adsprpcd' (pid 798) killing any children in process group
- 01-01 00:15:35.770 796 796 I keystore: Found keymaster0 module Keymaster QCOM HAL, version 3
- 01-01 00:15:35.770 796 796 I SoftKeymaster: system/keymaster/soft_keymaster_device.cpp, Line 122: Creating device
- 01-01 00:15:35.770 796 796 D SoftKeymaster: system/keymaster/soft_keymaster_device.cpp, Line 123: Device address: 0xb6ae4000
- 01-01 00:15:35.771 796 796 D QSEECOMAPI: : QSEECom_get_handle sb_length = 0x2000
- 01-01 00:15:35.771 796 796 D QSEECOMAPI: : App is not loaded in QSEE
- 01-01 00:15:35.771 796 796 E QSEECOMAPI: : Error::Cannot open the file /vendor/firmware/keymaster/keymaster.mdt
- 01-01 00:15:35.771 796 796 E QSEECOMAPI: : Error::Loading image failed with ret = -1
- 01-01 00:15:35.771 796 796 E QCOMKeyMaster: Loading keymaster app failed
- 01-01 00:15:35.771 796 796 E keystore: Error opening keystore keymaster0 device.
- 01-01 00:15:35.771 796 796 E keystore: keystore keymaster could not be initialized; exiting
- 02-01 21:13:28.725 0 0 I init : Service 'keystore' (pid 796) exited with status 1
- 02-01 21:13:28.725 0 0 I init : Service 'keystore' (pid 796) killing any children in process group
- 01-01 00:15:35.909 384 418 E use-Rlog/RLOG-RIL-QMI: qmi_client [384]: unable to connect to server, errno=[2:No such file or directory], attempt=6
- 01-01 00:15:36.376 393 393 I AudioPolicyService: AudioPolicyService CSTOR in new mode
- 01-01 00:15:36.384 393 393 W APM::HwModule: loadOutput() invalid supported devices
- 01-01 00:15:36.384 393 393 W APM::HwModule: loadInput() invalid supported devices
- 01-01 00:15:36.384 393 393 I APM::ConfigParsingUtils: loadAudioPolicyConfig() loaded /system/etc/audio_policy.conf
- 01-01 00:15:36.389 393 393 D audio_hw_primary: adev_open: enter
- 01-01 00:15:36.390 393 393 E msm8974_platform: find_index: Could not find index for name = SND_DEVICE_OUT_USB_HEADSET
- 01-01 00:15:36.390 393 393 E platform_info: process_acdb_id: Device SND_DEVICE_OUT_USB_HEADSET in /system/etc/audio_platform_info.xml not found, no ACDB ID set!
- 01-01 00:15:36.390 393 393 E msm8974_platform: find_index: Could not find index for name = SND_DEVICE_IN_HANDSET_STEREO_DMIC
- 01-01 00:15:36.390 393 393 E platform_info: process_acdb_id: Device SND_DEVICE_IN_HANDSET_STEREO_DMIC in /system/etc/audio_platform_info.xml not found, no ACDB ID set!
- 01-01 00:15:36.390 393 393 E msm8974_platform: find_index: Could not find index for name = SND_DEVICE_IN_SPEAKER_STEREO_DMIC
- 01-01 00:15:36.390 393 393 E platform_info: process_acdb_id: Device SND_DEVICE_IN_SPEAKER_STEREO_DMIC in /system/etc/audio_platform_info.xml not found, no ACDB ID set!
- 01-01 00:15:36.390 393 393 E msm8974_platform: find_index: Could not find index for name = SND_DEVICE_IN_VOIP_HANDSET_MIC
- 01-01 00:15:36.390 393 393 E platform_info: process_acdb_id: Device SND_DEVICE_IN_VOIP_HANDSET_MIC in /system/etc/audio_platform_info.xml not found, no ACDB ID set!
- 01-01 00:15:36.390 393 393 E msm8974_platform: find_index: Could not find index for name = SND_DEVICE_IN_VOIP_SPEAKER_MIC
- 01-01 00:15:36.390 393 393 E platform_info: process_acdb_id: Device SND_DEVICE_IN_VOIP_SPEAKER_MIC in /system/etc/audio_platform_info.xml not found, no ACDB ID set!
- 01-01 00:15:36.390 393 393 E platform_info: device tag only supported for acdb/backend names
- 01-01 00:15:36.390 393 393 E platform_info: device tag only supported for acdb/backend names
- 01-01 00:15:36.390 393 393 E platform_info: device tag only supported for acdb/backend names
- 01-01 00:15:36.390 393 393 E platform_info: device tag only supported for acdb/backend names
- 01-01 00:15:36.390 393 393 E platform_info: device tag only supported for acdb/backend names
- 01-01 00:15:36.390 393 393 E platform_info: device tag only supported for acdb/backend names
- 01-01 00:15:36.390 393 393 E platform_info: device tag only supported for acdb/backend names
- 01-01 00:15:36.390 393 393 E platform_info: device tag only supported for acdb/backend names
- 01-01 00:15:36.390 393 393 E platform_info: device tag only supported for acdb/backend names
- 01-01 00:15:36.390 393 393 E platform_info: device tag only supported for acdb/backend names
- 01-01 00:15:36.390 393 393 E platform_info: device tag only supported for acdb/backend names
- 01-01 00:15:36.390 393 393 E platform_info: device tag only supported for acdb/backend names
- 01-01 00:15:36.390 393 393 E platform_info: device tag only supported for acdb/backend names
- 01-01 00:15:36.390 393 393 E platform_info: device tag only supported for acdb/backend names
- 01-01 00:15:36.390 393 393 E platform_info: device tag only supported for acdb/backend names
- 01-01 00:15:36.390 393 393 E platform_info: device tag only supported for acdb/backend names
- 01-01 00:15:36.390 393 393 E platform_info: device tag only supported for acdb/backend names
- 01-01 00:15:36.390 393 393 E platform_info: device tag only supported for acdb/backend names
- 01-01 00:15:36.390 393 393 E platform_info: device tag only supported for acdb/backend names
- 01-01 00:15:36.390 393 393 E platform_info: device tag only supported for acdb/backend names
- 01-01 00:15:36.390 393 393 E platform_info: device tag only supported for acdb/backend names
- 01-01 00:15:36.390 393 393 E platform_info: device tag only supported for acdb/backend names
- 01-01 00:15:36.390 393 393 E platform_info: device tag only supported for acdb/backend names
- 01-01 00:15:36.390 393 393 E platform_info: device tag only supported for acdb/backend names
- 01-01 00:15:36.390 393 393 E platform_info: device tag only supported for acdb/backend names
- 01-01 00:15:36.390 393 393 E platform_info: device tag only supported for acdb/backend names
- 01-01 00:15:36.390 393 393 E platform_info: device tag only supported for acdb/backend names
- 01-01 00:15:36.390 393 393 E platform_info: device tag only supported for acdb/backend names
- 01-01 00:15:36.390 393 393 E platform_info: device tag only supported for acdb/backend names
- 01-01 00:15:36.390 393 393 E platform_info: device tag only supported for acdb/backend names
- 01-01 00:15:36.390 393 393 E platform_info: device tag only supported for acdb/backend names
- 01-01 00:15:36.390 393 393 E platform_info: device tag only supported for acdb/backend names
- 01-01 00:15:36.390 393 393 E platform_info: device tag only supported for acdb/backend names
- 01-01 00:15:36.909 384 418 E use-Rlog/RLOG-RIL-QMI: qmi_client [384]: unable to connect to server, errno=[2:No such file or directory], attempt=7
- 02-01 21:13:29.969 0 0 E pil-q6v5-mss fc880000.qcom,mss: mba: Failed to locate mba.mdt
- 02-01 21:13:29.969 0 0 E modem_notifier_cb: sysmon_send_event error -19
- 02-01 21:13:29.969 0 0 E M-Notify: General: 5
- 02-01 21:13:29.969 0 0 E msm_ipc_load_default_node: Failed to load modem
- 01-01 00:15:37.016 405 405 E use-Rlog/RLOG-RIL-QMI: qmi_client [405]: unable to bind to client socket, rc = -1 errno[13:Permission denied]
- 01-01 00:15:37.016 405 405 E use-Rlog/RLOG-RIL-QMI: qmi_qmux_if_pwr_up_init_ex: Initialization failed, rc = -1
- 01-01 00:15:37.016 405 405 E QMI_FW : QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
- 01-01 00:15:37.016 405 405 E use-Rlog/RLOG-RIL-QMI: qmi_client [405]: unable to bind to client socket, rc = -1 errno[13:Permission denied]
- 01-01 00:15:37.016 405 405 E use-Rlog/RLOG-RIL-QMI: qmi_qmux_if_pwr_up_init_ex: Initialization failed, rc = -1
- 01-01 00:15:37.016 405 405 E QMI_FW : QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
- 01-01 00:15:37.016 405 405 E use-Rlog/RLOG-RIL-QMI: qmi_client [405]: unable to bind to client socket, rc = -1 errno[13:Permission denied]
- 01-01 00:15:37.016 405 405 E use-Rlog/RLOG-RIL-QMI: qmi_qmux_if_pwr_up_init_ex: Initialization failed, rc = -1
- 01-01 00:15:37.016 405 405 E QMI_FW : QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
- 01-01 00:15:37.017 405 405 E use-Rlog/RLOG-RIL-QMI: qmi_client [405]: unable to bind to client socket, rc = -1 errno[13:Permission denied]
- 01-01 00:15:37.017 405 405 E use-Rlog/RLOG-RIL-QMI: qmi_qmux_if_pwr_up_init_ex: Initialization failed, rc = -1
- 01-01 00:15:37.017 405 405 E QMI_FW : QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
- 01-01 00:15:37.017 405 405 E QC-time-services: Daemon:genoff_modem_qmi_init: qmi_client_get_service_list returned -2num_services 0
- 01-01 00:15:37.909 384 418 E use-Rlog/RLOG-RIL-QMI: qmi_client [384]: unable to connect to server, errno=[2:No such file or directory], attempt=8
- 02-01 21:13:31.565 0 0 I max77803_get_input_current: CHG_CNFG_09(0x12)
- 02-01 21:13:31.566 0 0 I max77803_get_input_current: CHG_CNFG_09(0x12)
- 02-01 21:13:31.567 0 0 I sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (4328), data(0x0000)
- 02-01 21:13:31.594 0 0 I sec-battery battery.94: sec_bat_get_temperature_by_adc: Temp(351), Temp-ADC(31793)
- 02-01 21:13:31.595 0 0 I sec-battery battery.94: sec_bat_get_temperature_by_adc: Temp(292), Temp-ADC(33000)
- 02-01 21:13:31.595 0 0 I sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (4328), data(0x0000)
- 02-01 21:13:31.595 0 0 I sec-fuelgauge 19-0036: sec_fg_get_scaled_capacity: scaled capacity (44.9)
- 02-01 21:13:31.595 0 0 I sec-battery battery.94: sec_bat_get_battery_info:Vnow(3818mV),Inow(450mA),Imax(460mA),SOC(44%),Tbat(351),is_hc_usb(0)
- 02-01 21:13:31.595 0 0 I sec_bat_check_callback: battery->pdata->bat_irq_gpio(407)
- 02-01 21:13:31.595 0 0 I sec_bat_check_callback: Battery status(1)
- 02-01 21:13:31.595 0 0 I sec-battery battery.94: sec_bat_battery_cable_check: Battery Connected
- 02-01 21:13:31.596 0 0 I max77803_get_health_state: reg_data(0x3)
- 02-01 21:13:31.598 0 0 I max77803_get_health_state: vbus_state : 0x3, chg_dtls : 0x1
- 02-01 21:13:31.598 0 0 I sec-battery battery.94: sec_bat_monitor_work: Status(Charging), Mode(Normal), Health(Good), Cable(4), Vendor(SDI SDI), level(100%)
- 02-01 21:13:31.598 0 0 I sec-battery battery.94: sec_pogo_get_property: pogo charger is online (0)
- 02-01 21:13:31.599 0 0 I sec_chg_get_property: reg_data(93)
- 02-01 21:13:31.599 0 0 W healthd : sec-charger: Unknown power supply type
- 01-01 00:15:38.909 384 418 E use-Rlog/RLOG-RIL-QMI: qmi_client [384]: unable to connect to server, errno=[2:No such file or directory], attempt=9
- 01-01 00:15:39.018 405 405 E use-Rlog/RLOG-RIL-QMI: qmi_client [405]: unable to bind to client socket, rc = -1 errno[13:Permission denied]
- 01-01 00:15:39.018 405 405 E use-Rlog/RLOG-RIL-QMI: qmi_qmux_if_pwr_up_init_ex: Initialization failed, rc = -1
- 01-01 00:15:39.018 405 405 E QMI_FW : QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
- 01-01 00:15:39.018 405 405 E use-Rlog/RLOG-RIL-QMI: qmi_client [405]: unable to bind to client socket, rc = -1 errno[13:Permission denied]
- 01-01 00:15:39.018 405 405 E use-Rlog/RLOG-RIL-QMI: qmi_qmux_if_pwr_up_init_ex: Initialization failed, rc = -1
- 01-01 00:15:39.018 405 405 E QMI_FW : QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
- 01-01 00:15:39.018 405 405 E use-Rlog/RLOG-RIL-QMI: qmi_client [405]: unable to bind to client socket, rc = -1 errno[13:Permission denied]
- 01-01 00:15:39.018 405 405 E use-Rlog/RLOG-RIL-QMI: qmi_qmux_if_pwr_up_init_ex: Initialization failed, rc = -1
- 01-01 00:15:39.018 405 405 E QMI_FW : QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
- 01-01 00:15:39.018 405 405 E use-Rlog/RLOG-RIL-QMI: qmi_client [405]: unable to bind to client socket, rc = -1 errno[13:Permission denied]
- 01-01 00:15:39.018 405 405 E use-Rlog/RLOG-RIL-QMI: qmi_qmux_if_pwr_up_init_ex: Initialization failed, rc = -1
- 01-01 00:15:39.018 405 405 E QMI_FW : QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
- 01-01 00:15:39.018 405 405 E QC-time-services: Daemon:genoff_modem_qmi_init: qmi_client_get_service_list returned -2num_services 0
- 02-01 21:13:31.971 0 0 E pil-q6v5-mss fc880000.qcom,mss: mba: Failed to locate mba.mdt
- 02-01 21:13:31.971 0 0 E modem_notifier_cb: sysmon_send_event error -19
- 02-01 21:13:31.971 0 0 E M-Notify: General: 5
- 02-01 21:13:31.971 0 0 E msm_ipc_load_default_node: Failed to load modem
- 02-01 21:13:32.849 0 0 I msm_thermal: msm_therm_temp_log Debug Temp for Sensor:
- 01-01 00:15:39.909 384 418 E use-Rlog/RLOG-RIL-QMI: qmi_client [384]: unable to connect to server, errno=[2:No such file or directory], attempt=10
- 02-01 21:13:33.639 0 0 I msm_thermal: msm_therm_temp_log (0 --- 50)(1 --- 50)(2 --- 48)(3 --- 51)(4 --- 51)(5 --- 51)(6 --- 52)(7 --- 51)(8 --- 51)(9 --- 50)(10 --- 49)
- 02-01 21:13:33.639 0 0 I [SSP] : debug_work_func(1) - Sensor state: 0x3ffff, RC: 0, MS: 0 Santi: 0 Dump: 0
- 02-01 21:13:33.647 0 0 I : [SSP] Sensor Posision A : 6, G : 6, M: 3
- 01-01 00:15:40.784 804 804 F libc : page record for 0xb6f5b02c was not found (block_size=16)
- 01-01 00:15:40.785 806 806 F libc : page record for 0xb6f7f02c was not found (block_size=16)
- 02-01 21:13:33.730 0 0 I init : Starting service 'ril-daemon'...
- 02-01 21:13:33.731 0 0 I init : Starting service 'keystore'...
- 02-01 21:13:33.731 0 0 E init : Warning! Service qcamerasvr needs a SELinux domain defined; please fix!
- 02-01 21:13:33.731 0 0 I init : Starting service 'qcamerasvr'...
- 02-01 21:13:33.732 0 0 E init : Warning! Service adsprpcd needs a SELinux domain defined; please fix!
- 02-01 21:13:33.732 0 0 I init : Starting service 'adsprpcd'...
- 02-01 21:13:33.737 0 0 I init : Service 'ril-daemon' (pid 804) exited with status 1
- 02-01 21:13:33.738 0 0 I init : Service 'ril-daemon' (pid 804) killing any children in process group
- 02-01 21:13:33.738 0 0 I init : Service 'qcamerasvr' (pid 806) exited with status 1
- 02-01 21:13:33.738 0 0 I init : Service 'qcamerasvr' (pid 806) killing any children in process group
- 01-01 00:15:40.791 807 807 E adsprpc : vendor/qcom/proprietary/adsprpc/src/fastrpc_apps_user.c:126:/dev/adsprpc-smd device initialization error: Operation not permitted
- 01-01 00:15:40.791 807 807 E adsprpc : vendor/qcom/proprietary/adsprpc/src/fastrpc_apps_user.c:179::error: -1: dev != -1
- 01-01 00:15:40.791 807 807 E adsprpc : vendor/qcom/proprietary/adsprpc/src/fastrpc_apps_user.c:224::error: -1: 0 == (nErr = remotectl_open(name, (int*)ph, dlerrstr, sizeof(dlerrstr), &dlerr))
- 01-01 00:15:40.791 807 807 E adsprpc : vendor/qcom/proprietary/adsprpc/src/fastrpc_apps_user.c:126:/dev/adsprpc-smd device initialization error: No such file or directory
- 01-01 00:15:40.791 807 807 E adsprpc : vendor/qcom/proprietary/adsprpc/src/fastrpc_apps_user.c:179::error: -1: dev != -1
- 01-01 00:15:40.791 807 807 E adsprpc : vendor/qcom/proprietary/adsprpc/src/adsprpcd.c:23::error: -1: 0 == adsp_default_listener_register()
- 01-01 00:15:40.791 807 807 E adsprpc : vendor/qcom/proprietary/adsprpc/src/adsprpcd.c:36:adsprpcd exiting nErr=-1
- 02-01 21:13:33.744 0 0 I init : Service 'adsprpcd' (pid 807) exited with status 255
- 02-01 21:13:33.744 0 0 I init : Service 'adsprpcd' (pid 807) killing any children in process group
- 01-01 00:15:40.805 805 805 I keystore: Found keymaster0 module Keymaster QCOM HAL, version 3
- 01-01 00:15:40.805 805 805 I SoftKeymaster: system/keymaster/soft_keymaster_device.cpp, Line 122: Creating device
- 01-01 00:15:40.805 805 805 D SoftKeymaster: system/keymaster/soft_keymaster_device.cpp, Line 123: Device address: 0xb6ba4000
- 01-01 00:15:40.806 805 805 D QSEECOMAPI: : QSEECom_get_handle sb_length = 0x2000
- 01-01 00:15:40.806 805 805 D QSEECOMAPI: : App is not loaded in QSEE
- 01-01 00:15:40.806 805 805 E QSEECOMAPI: : Error::Cannot open the file /vendor/firmware/keymaster/keymaster.mdt
- 01-01 00:15:40.806 805 805 E QSEECOMAPI: : Error::Loading image failed with ret = -1
- 01-01 00:15:40.806 805 805 E QCOMKeyMaster: Loading keymaster app failed
- 01-01 00:15:40.806 805 805 E keystore: Error opening keystore keymaster0 device.
- 01-01 00:15:40.806 805 805 E keystore: keystore keymaster could not be initialized; exiting
- 02-01 21:13:33.760 0 0 I init : Service 'keystore' (pid 805) exited with status 1
- 02-01 21:13:33.760 0 0 I init : Service 'keystore' (pid 805) killing any children in process group
- 01-01 00:15:40.909 384 418 E use-Rlog/RLOG-RIL-QMI: qmi_client [384]: unable to connect to server, errno=[2:No such file or directory], attempt=11
- 01-01 00:15:41.020 405 405 E use-Rlog/RLOG-RIL-QMI: qmi_client [405]: unable to bind to client socket, rc = -1 errno[13:Permission denied]
- 01-01 00:15:41.020 405 405 E use-Rlog/RLOG-RIL-QMI: qmi_qmux_if_pwr_up_init_ex: Initialization failed, rc = -1
- 01-01 00:15:41.020 405 405 E QMI_FW : QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
- 01-01 00:15:41.020 405 405 E use-Rlog/RLOG-RIL-QMI: qmi_client [405]: unable to bind to client socket, rc = -1 errno[13:Permission denied]
- 01-01 00:15:41.020 405 405 E use-Rlog/RLOG-RIL-QMI: qmi_qmux_if_pwr_up_init_ex: Initialization failed, rc = -1
- 01-01 00:15:41.020 405 405 E QMI_FW : QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
- 01-01 00:15:41.020 405 405 E use-Rlog/RLOG-RIL-QMI: qmi_client [405]: unable to bind to client socket, rc = -1 errno[13:Permission denied]
- 01-01 00:15:41.020 405 405 E use-Rlog/RLOG-RIL-QMI: qmi_qmux_if_pwr_up_init_ex: Initialization failed, rc = -1
- 01-01 00:15:41.020 405 405 E QMI_FW : QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
- 01-01 00:15:41.020 405 405 E use-Rlog/RLOG-RIL-QMI: qmi_client [405]: unable to bind to client socket, rc = -1 errno[13:Permission denied]
- 01-01 00:15:41.020 405 405 E use-Rlog/RLOG-RIL-QMI: qmi_qmux_if_pwr_up_init_ex: Initialization failed, rc = -1
- 01-01 00:15:41.020 405 405 E QMI_FW : QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
- 01-01 00:15:41.020 405 405 E QC-time-services: Daemon:genoff_modem_qmi_init: qmi_client_get_service_list returned -2num_services 0
- 01-01 00:15:41.020 405 405 E QC-time-services: Daemon:genoff_modem_qmi_init:retry count exceeds limitQMI init failed continuing withoutserver
- 02-01 21:13:33.973 0 0 E pil-q6v5-mss fc880000.qcom,mss: mba: Failed to locate mba.mdt
- 02-01 21:13:33.973 0 0 E modem_notifier_cb: sysmon_send_event error -19
- 02-01 21:13:33.973 0 0 E M-Notify: General: 5
- 02-01 21:13:33.973 0 0 E msm_ipc_load_default_node: Failed to load modem
- 01-01 00:15:41.206 405 405 E QC-time-services: Daemon: QMI init failed, QMI calls inactive
- 01-01 00:15:41.206 405 810 D QC-time-services: Daemon: Time-services: All initializations done
- 01-01 00:15:41.206 405 810 E QC-time-services: Daemon: Time-services: Waiting to acceptconnection
- 01-01 00:15:41.392 393 393 E msm8974_platform: platform_init: Unable to open the mixer card: 0
- 01-01 00:15:41.910 384 418 E use-Rlog/RLOG-RIL-QMI: qmi_client [384]: unable to connect to server, errno=[2:No such file or directory], attempt=12
- 02-01 21:13:35.649 0 0 D dummy0 : no IPv6 routers present
- 01-01 00:15:42.910 384 418 E use-Rlog/RLOG-RIL-QMI: qmi_client [384]: unable to connect to server, errno=[2:No such file or directory], attempt=13
- 01-01 00:15:43.910 384 418 E use-Rlog/RLOG-RIL-QMI: qmi_client [384]: unable to connect to server, errno=[2:No such file or directory], attempt=14
- 01-01 00:15:44.910 384 418 E use-Rlog/RLOG-RIL-QMI: qmi_client [384]: unable to connect to server, errno=[2:No such file or directory], attempt=15
- 02-01 21:13:37.859 0 0 I msm_thermal: msm_therm_temp_log Debug Temp for Sensor:
- 02-01 21:13:38.765 0 0 I msm_thermal: msm_therm_temp_log (0 --- 49)(1 --- 49)(2 --- 48)(3 --- 50)(4 --- 50)(5 --- 51)(6 --- 51)(7 --- 51)(8 --- 51)(9 --- 49)(10 --- 49)
- 02-01 21:13:38.765 0 0 I init : Starting service 'ril-daemon'...
- 02-01 21:13:38.766 0 0 I init : Starting service 'keystore'...
- 02-01 21:13:38.767 0 0 E init : Warning! Service qcamerasvr needs a SELinux domain defined; please fix!
- 02-01 21:13:38.767 0 0 I init : Starting service 'qcamerasvr'...
- 02-01 21:13:38.767 0 0 E init : Warning! Service adsprpcd needs a SELinux domain defined; please fix!
- 02-01 21:13:38.767 0 0 I init : Starting service 'adsprpcd'...
- 01-01 00:15:45.819 811 811 F libc : page record for 0xb6f0202c was not found (block_size=16)
- 01-01 00:15:45.820 813 813 F libc : page record for 0xb6f6e02c was not found (block_size=16)
- 02-01 21:13:38.772 0 0 I init : Service 'ril-daemon' (pid 811) exited with status 1
- 02-01 21:13:38.772 0 0 I init : Service 'ril-daemon' (pid 811) killing any children in process group
- 02-01 21:13:38.773 0 0 I init : Service 'qcamerasvr' (pid 813) exited with status 1
- 02-01 21:13:38.773 0 0 I init : Service 'qcamerasvr' (pid 813) killing any children in process group
- 01-01 00:15:45.826 814 814 E adsprpc : vendor/qcom/proprietary/adsprpc/src/fastrpc_apps_user.c:126:/dev/adsprpc-smd device initialization error: Operation not permitted
- 01-01 00:15:45.826 814 814 E adsprpc : vendor/qcom/proprietary/adsprpc/src/fastrpc_apps_user.c:179::error: -1: dev != -1
- 01-01 00:15:45.826 814 814 E adsprpc : vendor/qcom/proprietary/adsprpc/src/fastrpc_apps_user.c:224::error: -1: 0 == (nErr = remotectl_open(name, (int*)ph, dlerrstr, sizeof(dlerrstr), &dlerr))
- 01-01 00:15:45.826 814 814 E adsprpc : vendor/qcom/proprietary/adsprpc/src/fastrpc_apps_user.c:126:/dev/adsprpc-smd device initialization error: No such file or directory
- 01-01 00:15:45.826 814 814 E adsprpc : vendor/qcom/proprietary/adsprpc/src/fastrpc_apps_user.c:179::error: -1: dev != -1
- 01-01 00:15:45.826 814 814 E adsprpc : vendor/qcom/proprietary/adsprpc/src/adsprpcd.c:23::error: -1: 0 == adsp_default_listener_register()
- 01-01 00:15:45.826 814 814 E adsprpc : vendor/qcom/proprietary/adsprpc/src/adsprpcd.c:36:adsprpcd exiting nErr=-1
- 02-01 21:13:38.780 0 0 I init : Service 'adsprpcd' (pid 814) exited with status 255
- 02-01 21:13:38.780 0 0 I init : Service 'adsprpcd' (pid 814) killing any children in process group
- 01-01 00:15:45.840 812 812 I keystore: Found keymaster0 module Keymaster QCOM HAL, version 3
- 01-01 00:15:45.840 812 812 I SoftKeymaster: system/keymaster/soft_keymaster_device.cpp, Line 122: Creating device
- 01-01 00:15:45.840 812 812 D SoftKeymaster: system/keymaster/soft_keymaster_device.cpp, Line 123: Device address: 0xb6b64000
- 01-01 00:15:45.841 812 812 D QSEECOMAPI: : QSEECom_get_handle sb_length = 0x2000
- 01-01 00:15:45.841 812 812 D QSEECOMAPI: : App is not loaded in QSEE
- 01-01 00:15:45.841 812 812 E QSEECOMAPI: : Error::Cannot open the file /vendor/firmware/keymaster/keymaster.mdt
- 01-01 00:15:45.841 812 812 E QSEECOMAPI: : Error::Loading image failed with ret = -1
- 01-01 00:15:45.841 812 812 E QCOMKeyMaster: Loading keymaster app failed
- 01-01 00:15:45.841 812 812 E keystore: Error opening keystore keymaster0 device.
- 01-01 00:15:45.841 812 812 E keystore: keystore keymaster could not be initialized; exiting
- 02-01 21:13:38.795 0 0 I init : Service 'keystore' (pid 812) exited with status 1
- 02-01 21:13:38.795 0 0 I init : Service 'keystore' (pid 812) killing any children in process group
- 01-01 00:15:45.910 384 418 E use-Rlog/RLOG-RIL-QMI: qmi_client [384]: unable to connect to server, errno=[2:No such file or directory], attempt=16
- 01-01 00:15:46.393 393 393 E msm8974_platform: platform_init: Unable to open the mixer card: 1
- 01-01 00:15:46.910 384 418 E use-Rlog/RLOG-RIL-QMI: qmi_client [384]: unable to connect to server, errno=[2:No such file or directory], attempt=17
- 01-01 00:15:47.910 384 418 E use-Rlog/RLOG-RIL-QMI: qmi_client [384]: unable to connect to server, errno=[2:No such file or directory], attempt=18
- 02-01 21:13:41.852 0 0 I max77803_get_input_current: CHG_CNFG_09(0x12)
- 02-01 21:13:41.853 0 0 I max77803_get_input_current: CHG_CNFG_09(0x12)
- 02-01 21:13:41.854 0 0 I sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (4328), data(0x0000)
- 01-01 00:15:48.910 384 418 E use-Rlog/RLOG-RIL-QMI: qmi_client [384]: unable to connect to server, errno=[2:No such file or directory], attempt=19
- 02-01 21:13:41.881 0 0 I sec-battery battery.94: sec_bat_get_temperature_by_adc: Temp(351), Temp-ADC(31793)
- 02-01 21:13:41.881 0 0 I sec-battery battery.94: sec_bat_get_temperature_by_adc: Temp(292), Temp-ADC(33000)
- 02-01 21:13:41.882 0 0 I sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (4328), data(0x0000)
- 02-01 21:13:41.882 0 0 I sec-fuelgauge 19-0036: sec_fg_get_scaled_capacity: scaled capacity (44.9)
- 02-01 21:13:41.882 0 0 I sec-battery battery.94: sec_bat_get_battery_info:Vnow(3821mV),Inow(450mA),Imax(460mA),SOC(44%),Tbat(351),is_hc_usb(0)
- 02-01 21:13:41.882 0 0 I sec_bat_check_callback: battery->pdata->bat_irq_gpio(407)
- 02-01 21:13:41.882 0 0 I sec_bat_check_callback: Battery status(1)
- 02-01 21:13:41.882 0 0 I sec-battery battery.94: sec_bat_battery_cable_check: Battery Connected
- 02-01 21:13:41.883 0 0 I max77803_get_health_state: reg_data(0x3)
- 02-01 21:13:41.885 0 0 I max77803_get_health_state: vbus_state : 0x3, chg_dtls : 0x1
- 02-01 21:13:41.885 0 0 I sec-battery battery.94: sec_bat_monitor_work: Status(Charging), Mode(Normal), Health(Good), Cable(4), Vendor(SDI SDI), level(100%)
- 02-01 21:13:41.885 0 0 I sec-battery battery.94: sec_pogo_get_property: pogo charger is online (0)
- 02-01 21:13:41.886 0 0 I sec_chg_get_property: reg_data(93)
- 02-01 21:13:41.886 0 0 W healthd : sec-charger: Unknown power supply type
- 01-01 00:15:49.911 384 418 E use-Rlog/RLOG-RIL-QMI: qmi_client [384]: unable to connect to server, errno=[2:No such file or directory], attempt=20
- 02-01 21:13:42.869 0 0 I msm_thermal: msm_therm_temp_log Debug Temp for Sensor:
- 01-01 00:15:50.854 815 815 F libc : page record for 0xb6f3702c was not found (block_size=16)
- 01-01 00:15:50.855 817 817 F libc : page record for 0xb6f0302c was not found (block_size=16)
- 02-01 21:13:43.800 0 0 I msm_thermal: msm_therm_temp_log (0 --- 49)(1 --- 49)(2 --- 48)(3 --- 50)(4 --- 50)(5 --- 50)(6 --- 51)(7 --- 50)(8 --- 50)(9 --- 49)(10 --- 48)
- 02-01 21:13:43.800 0 0 I init : Starting service 'ril-daemon'...
- 02-01 21:13:43.801 0 0 I init : Starting service 'keystore'...
- 02-01 21:13:43.801 0 0 E init : Warning! Service qcamerasvr needs a SELinux domain defined; please fix!
- 02-01 21:13:43.801 0 0 I init : Starting service 'qcamerasvr'...
- 02-01 21:13:43.802 0 0 E init : Warning! Service adsprpcd needs a SELinux domain defined; please fix!
- 02-01 21:13:43.802 0 0 I init : Starting service 'adsprpcd'...
- 02-01 21:13:43.807 0 0 I init : Service 'ril-daemon' (pid 815) exited with status 1
- 02-01 21:13:43.807 0 0 I init : Service 'ril-daemon' (pid 815) killing any children in process group
- 02-01 21:13:43.808 0 0 I init : Service 'qcamerasvr' (pid 817) exited with status 1
- 02-01 21:13:43.808 0 0 I init : Service 'qcamerasvr' (pid 817) killing any children in process group
- 01-01 00:15:50.861 818 818 E adsprpc : vendor/qcom/proprietary/adsprpc/src/fastrpc_apps_user.c:126:/dev/adsprpc-smd device initialization error: Operation not permitted
- 01-01 00:15:50.861 818 818 E adsprpc : vendor/qcom/proprietary/adsprpc/src/fastrpc_apps_user.c:179::error: -1: dev != -1
- 01-01 00:15:50.861 818 818 E adsprpc : vendor/qcom/proprietary/adsprpc/src/fastrpc_apps_user.c:224::error: -1: 0 == (nErr = remotectl_open(name, (int*)ph, dlerrstr, sizeof(dlerrstr), &dlerr))
- 01-01 00:15:50.861 818 818 E adsprpc : vendor/qcom/proprietary/adsprpc/src/fastrpc_apps_user.c:126:/dev/adsprpc-smd device initialization error: No such file or directory
- 01-01 00:15:50.861 818 818 E adsprpc : vendor/qcom/proprietary/adsprpc/src/fastrpc_apps_user.c:179::error: -1: dev != -1
- 01-01 00:15:50.861 818 818 E adsprpc : vendor/qcom/proprietary/adsprpc/src/adsprpcd.c:23::error: -1: 0 == adsp_default_listener_register()
- 01-01 00:15:50.861 818 818 E adsprpc : vendor/qcom/proprietary/adsprpc/src/adsprpcd.c:36:adsprpcd exiting nErr=-1
- 02-01 21:13:43.814 0 0 I init : Service 'adsprpcd' (pid 818) exited with status 255
- 02-01 21:13:43.814 0 0 I init : Service 'adsprpcd' (pid 818) killing any children in process group
- 01-01 00:15:50.875 816 816 I keystore: Found keymaster0 module Keymaster QCOM HAL, version 3
- 01-01 00:15:50.875 816 816 I SoftKeymaster: system/keymaster/soft_keymaster_device.cpp, Line 122: Creating device
- 01-01 00:15:50.875 816 816 D SoftKeymaster: system/keymaster/soft_keymaster_device.cpp, Line 123: Device address: 0xb6b64000
- 01-01 00:15:50.876 816 816 D QSEECOMAPI: : QSEECom_get_handle sb_length = 0x2000
- 01-01 00:15:50.876 816 816 D QSEECOMAPI: : App is not loaded in QSEE
- 01-01 00:15:50.876 816 816 E QSEECOMAPI: : Error::Cannot open the file /vendor/firmware/keymaster/keymaster.mdt
- 01-01 00:15:50.876 816 816 E QSEECOMAPI: : Error::Loading image failed with ret = -1
- 01-01 00:15:50.876 816 816 E QCOMKeyMaster: Loading keymaster app failed
- 01-01 00:15:50.876 816 816 E keystore: Error opening keystore keymaster0 device.
- 01-01 00:15:50.876 816 816 E keystore: keystore keymaster could not be initialized; exiting
- 02-01 21:13:43.830 0 0 I init : Service 'keystore' (pid 816) exited with status 1
- 02-01 21:13:43.830 0 0 I init : Service 'keystore' (pid 816) killing any children in process group
- 01-01 00:15:50.911 384 418 E use-Rlog/RLOG-RIL-QMI: qmi_client [384]: unable to connect to server, errno=[2:No such file or directory], attempt=21
- 01-01 00:15:50.986 397 397 E use-Rlog/RLOG-RIL-QMI: linux_qmi_qmux_io.c: Unable to open port id /dev/smdcntl0, error [2:No such file or directory]
- 01-01 00:15:50.986 397 397 E use-Rlog/RLOG-RIL-RAWDATA: qmi_qmux_open_connection: QMI_QMUX_IO_PLATFORM_OPEN_CONN failed -1
- 01-01 00:15:50.986 397 397 E use-Rlog/RLOG-RIL-QMI: qmuxd: opening connection for RMNET0 [DATA5_CNTL] failed on attempt 0, Waiting 500 milliseconds before retry
- 01-01 00:15:51.397 393 393 E msm8974_platform: platform_init: Unable to open the mixer card: 2
- 01-01 00:15:51.486 397 397 E use-Rlog/RLOG-RIL-QMI: linux_qmi_qmux_if_configure_port_timeout: mode=0, smd_timeout=20, hsic_timeout=60
- 01-01 00:15:51.486 397 397 E use-Rlog/RLOG-RIL-QMI: linux_qmi_qmux_if_configure_port_timeout: failed to open HSIC timeout config=/sys/devices/virtual/hsicctl/hsicctl0/modem_wait errno [2:No such file or directory]
- 02-01 21:13:44.441 0 0 E pil-q6v5-mss fc880000.qcom,mss: mba: Failed to locate mba.mdt
- 02-01 21:13:44.441 0 0 E modem_notifier_cb: sysmon_send_event error -19
- 02-01 21:13:44.441 0 0 E M-Notify: General: 5
- 02-01 21:13:44.441 0 0 E : smd_pkt_open failed on smd_pkt_dev id:0 - subsystem_get failed for modem
- 02-01 21:13:44.639 0 0 I [SSP] : debug_work_func(1) - Sensor state: 0x3ffff, RC: 0, MS: 0 Santi: 0 Dump: 0
- 02-01 21:13:44.647 0 0 I : [SSP] Sensor Posision A : 6, G : 6, M: 3
- 01-01 00:15:51.911 384 418 E use-Rlog/RLOG-RIL-QMI: qmi_client [384]: unable to connect to server, errno=[2:No such file or directory], attempt=22
- 01-01 00:15:52.911 384 418 E use-Rlog/RLOG-RIL-QMI: qmi_client [384]: unable to connect to server, errno=[2:No such file or directory], attempt=23
- 01-01 00:15:53.911 384 418 E use-Rlog/RLOG-RIL-QMI: qmi_client [384]: unable to connect to server, errno=[2:No such file or directory], attempt=24
- 01-01 00:15:54.911 384 418 E use-Rlog/RLOG-RIL-QMI: qmi_client [384]: unable to connect to server, errno=[2:No such file or directory], attempt=25
- 02-01 21:13:47.879 0 0 I msm_thermal: msm_therm_temp_log Debug Temp for Sensor:
- 02-01 21:13:48.835 0 0 I msm_thermal: msm_therm_temp_log (0 --- 49)(1 --- 49)(2 --- 48)(3 --- 50)(4 --- 50)(5 --- 50)(6 --- 51)(7 --- 50)(8 --- 50)(9 --- 49)(10 --- 48)
- 02-01 21:13:48.835 0 0 I init : Starting service 'ril-daemon'...
- 02-01 21:13:48.836 0 0 I init : Starting service 'keystore'...
- 02-01 21:13:48.836 0 0 E init : Warning! Service qcamerasvr needs a SELinux domain defined; please fix!
- 02-01 21:13:48.836 0 0 I init : Starting service 'qcamerasvr'...
- 02-01 21:13:48.837 0 0 E init : Warning! Service adsprpcd needs a SELinux domain defined; please fix!
- 02-01 21:13:48.837 0 0 I init : Starting service 'adsprpcd'...
- 01-01 00:15:55.889 820 820 F libc : page record for 0xb6f8702c was not found (block_size=16)
- 01-01 00:15:55.890 822 822 F libc : page record for 0xb6eed02c was not found (block_size=16)
- 02-01 21:13:48.842 0 0 I init : Service 'ril-daemon' (pid 820) exited with status 1
- 02-01 21:13:48.842 0 0 I init : Service 'ril-daemon' (pid 820) killing any children in process group
- 02-01 21:13:48.843 0 0 I init : Service 'qcamerasvr' (pid 822) exited with status 1
- 02-01 21:13:48.843 0 0 I init : Service 'qcamerasvr' (pid 822) killing any children in process group
- 02-01 21:13:48.843 0 0 E : reading MSM_THERM_CH [rc = 0] [adc_code = 30092]
- 01-01 00:15:55.896 823 823 E adsprpc : vendor/qcom/proprietary/adsprpc/src/fastrpc_apps_user.c:126:/dev/adsprpc-smd device initialization error: Operation not permitted
- 01-01 00:15:55.896 823 823 E adsprpc : vendor/qcom/proprietary/adsprpc/src/fastrpc_apps_user.c:179::error: -1: dev != -1
- 01-01 00:15:55.896 823 823 E adsprpc : vendor/qcom/proprietary/adsprpc/src/fastrpc_apps_user.c:224::error: -1: 0 == (nErr = remotectl_open(name, (int*)ph, dlerrstr, sizeof(dlerrstr), &dlerr))
- 01-01 00:15:55.896 823 823 E adsprpc : vendor/qcom/proprietary/adsprpc/src/fastrpc_apps_user.c:126:/dev/adsprpc-smd device initialization error: No such file or directory
- 01-01 00:15:55.896 823 823 E adsprpc : vendor/qcom/proprietary/adsprpc/src/fastrpc_apps_user.c:179::error: -1: dev != -1
- 01-01 00:15:55.896 823 823 E adsprpc : vendor/qcom/proprietary/adsprpc/src/adsprpcd.c:23::error: -1: 0 == adsp_default_listener_register()
- 01-01 00:15:55.896 823 823 E adsprpc : vendor/qcom/proprietary/adsprpc/src/adsprpcd.c:36:adsprpcd exiting nErr=-1
- 02-01 21:13:48.850 0 0 I init : Service 'adsprpcd' (pid 823) exited with status 255
- 02-01 21:13:48.850 0 0 I init : Service 'adsprpcd' (pid 823) killing any children in process group
- 01-01 00:15:55.910 821 821 I keystore: Found keymaster0 module Keymaster QCOM HAL, version 3
- 01-01 00:15:55.910 821 821 I SoftKeymaster: system/keymaster/soft_keymaster_device.cpp, Line 122: Creating device
- 01-01 00:15:55.910 821 821 D SoftKeymaster: system/keymaster/soft_keymaster_device.cpp, Line 123: Device address: 0xb6ae4000
- 01-01 00:15:55.911 821 821 D QSEECOMAPI: : QSEECom_get_handle sb_length = 0x2000
- 01-01 00:15:55.911 821 821 D QSEECOMAPI: : App is not loaded in QSEE
- 01-01 00:15:55.911 821 821 E QSEECOMAPI: : Error::Cannot open the file /vendor/firmware/keymaster/keymaster.mdt
- 01-01 00:15:55.911 821 821 E QSEECOMAPI: : Error::Loading image failed with ret = -1
- 01-01 00:15:55.911 821 821 E QCOMKeyMaster: Loading keymaster app failed
- 01-01 00:15:55.911 821 821 E keystore: Error opening keystore keymaster0 device.
- 01-01 00:15:55.911 821 821 E keystore: keystore keymaster could not be initialized; exiting
- 01-01 00:15:55.911 384 418 E use-Rlog/RLOG-RIL-QMI: qmi_client [384]: unable to connect to server, errno=[2:No such file or directory], attempt=26
- 02-01 21:13:48.865 0 0 I init : Service 'keystore' (pid 821) exited with status 1
- 02-01 21:13:48.865 0 0 I init : Service 'keystore' (pid 821) killing any children in process group
- 02-01 21:13:48.870 0 0 I sec-thermistor: sec_therm_polling_work: adc=30092
- 02-01 21:13:48.870 0 0 I sec-thermistor: sec_therm_polling_work: temper=445
- 02-01 21:13:48.874 0 0 E : reading LR_MUX9_PU2_AMUX_THM5 [rc = 0] [adc_code = 30534]
- 02-01 21:13:48.878 0 0 E : reading LR_MUX9_PU2_AMUX_THM5 [rc = 0] [adc_code = 30535]
- 02-01 21:13:48.883 0 0 E : reading LR_MUX9_PU2_AMUX_THM5 [rc = 0] [adc_code = 30535]
- 02-01 21:13:48.887 0 0 E : reading LR_MUX9_PU2_AMUX_THM5 [rc = 0] [adc_code = 30533]
- 02-01 21:13:48.891 0 0 E : reading LR_MUX9_PU2_AMUX_THM5 [rc = 0] [adc_code = 30534]
- 02-01 21:13:48.896 0 0 E : reading LR_MUX9_PU2_AMUX_THM5 [rc = 0] [adc_code = 30534]
- 02-01 21:13:48.900 0 0 E : reading LR_MUX9_PU2_AMUX_THM5 [rc = 0] [adc_code = 30534]
- 02-01 21:13:48.900 0 0 I sec-thermistor: sec_therm_polling_work: adc_flash=30534
- 02-01 21:13:48.900 0 0 I sec-thermistor: sec_therm_polling_work: temper_flash=423
- 02-01 21:13:48.900 0 0 I sec-thermistor: notify_change_of_temperature: siop_level=-1
- 02-01 21:13:48.900 0 0 I sec-thermistor: notify_change_of_temperature: uevent: SUBTEMPERATURE=445
- 01-01 00:15:56.398 393 393 E msm8974_platform: platform_init: Unable to open the mixer card: 3
- 01-01 00:15:56.911 384 418 E use-Rlog/RLOG-RIL-QMI: qmi_client [384]: unable to connect to server, errno=[2:No such file or directory], attempt=27
- 01-01 00:15:57.912 384 418 E use-Rlog/RLOG-RIL-QMI: qmi_client [384]: unable to connect to server, errno=[2:No such file or directory], attempt=28
- 01-01 00:15:58.912 384 418 E use-Rlog/RLOG-RIL-QMI: qmi_client [384]: unable to connect to server, errno=[2:No such file or directory], attempt=29
- 01-01 00:15:59.912 384 418 E use-Rlog/RLOG-RIL-QMI: qmi_client [384]: unable to connect to server, errno=[2:No such file or directory], attempt=30
- 02-01 21:13:52.889 0 0 I msm_thermal: msm_therm_temp_log Debug Temp for Sensor:
- 02-01 21:13:53.301 0 0 I msm_thermal: msm_therm_temp_log (0 --- 49)(1 --- 49)(2 --- 48)(3 --- 50)(4 --- 50)(5 --- 50)(6 --- 51)(7 --- 50)(8 --- 50)(9 --- 49)(10 --- 48)
- 02-01 21:13:53.301 0 0 I max77803_get_input_current: CHG_CNFG_09(0x12)
- 02-01 21:13:53.301 0 0 I max77803_get_input_current: CHG_CNFG_09(0x12)
- 02-01 21:13:53.303 0 0 I sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (4328), data(0x0000)
- 02-01 21:13:53.329 0 0 I sec-battery battery.94: sec_bat_get_temperature_by_adc: Temp(351), Temp-ADC(31790)
- 02-01 21:13:53.330 0 0 I sec-battery battery.94: sec_bat_get_temperature_by_adc: Temp(292), Temp-ADC(33000)
- 02-01 21:13:53.331 0 0 I sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (4328), data(0x0000)
- 02-01 21:13:53.331 0 0 I sec-fuelgauge 19-0036: sec_fg_get_scaled_capacity: scaled capacity (44.9)
- 02-01 21:13:53.331 0 0 I sec-battery battery.94: sec_bat_get_battery_info:Vnow(3817mV),Inow(450mA),Imax(460mA),SOC(44%),Tbat(351),is_hc_usb(0)
- 02-01 21:13:53.331 0 0 I sec_bat_check_callback: battery->pdata->bat_irq_gpio(407)
- 02-01 21:13:53.331 0 0 I sec_bat_check_callback: Battery status(1)
- 02-01 21:13:53.331 0 0 I sec-battery battery.94: sec_bat_battery_cable_check: Battery Connected
- 02-01 21:13:53.332 0 0 I max77803_get_health_state: reg_data(0x3)
- 02-01 21:13:53.333 0 0 I max77803_get_health_state: vbus_state : 0x3, chg_dtls : 0x1
- 02-01 21:13:53.333 0 0 I sec-battery battery.94: sec_bat_time_management: Charging Time : 94 secs
- 02-01 21:13:53.333 0 0 I sec-battery battery.94: sec_bat_temperature: HLT(2000) HLR(2000) HT(600), HR(400), LT(-50), LR(0)
- 02-01 21:13:53.333 0 0 I sec-battery battery.94: sec_bat_fullcharged_check: Charging Mode : Normal
- 02-01 21:13:53.333 0 0 I sec-battery battery.94: sec_bat_monitor_work: Status(Charging), Mode(Normal), Health(Good), Cable(4), Vendor(SDI SDI), level(100%)
- 02-01 21:13:53.334 0 0 I sec-battery battery.94: sec_pogo_get_property: pogo charger is online (0)
- 02-01 21:13:53.335 0 0 I sec_chg_get_property: reg_data(93)
- 02-01 21:13:53.335 0 0 W healthd : sec-charger: Unknown power supply type
- 01-01 00:16:00.912 384 418 E use-Rlog/RLOG-RIL-QMI: qmi_client [384]: unable to connect to server, errno=[2:No such file or directory], attempt=31
- 01-01 00:16:00.924 824 824 F libc : page record for 0xb6f1d02c was not found (block_size=16)
- 01-01 00:16:00.925 826 826 F libc : page record for 0xb6fa202c was not found (block_size=16)
- 02-01 21:13:53.871 0 0 I init : Starting service 'ril-daemon'...
- 02-01 21:13:53.871 0 0 I init : Starting service 'keystore'...
- 02-01 21:13:53.872 0 0 E init : Warning! Service qcamerasvr needs a SELinux domain defined; please fix!
- 02-01 21:13:53.872 0 0 I init : Starting service 'qcamerasvr'...
- 02-01 21:13:53.872 0 0 E init : Warning! Service adsprpcd needs a SELinux domain defined; please fix!
- 02-01 21:13:53.872 0 0 I init : Starting service 'adsprpcd'...
- 02-01 21:13:53.878 0 0 I init : Service 'ril-daemon' (pid 824) exited with status 1
- 02-01 21:13:53.878 0 0 I init : Service 'ril-daemon' (pid 824) killing any children in process group
- 02-01 21:13:53.879 0 0 I init : Service 'qcamerasvr' (pid 826) exited with status 1
- 02-01 21:13:53.879 0 0 I init : Service 'qcamerasvr' (pid 826) killing any children in process group
- 01-01 00:16:00.931 827 827 E adsprpc : vendor/qcom/proprietary/adsprpc/src/fastrpc_apps_user.c:126:/dev/adsprpc-smd device initialization error: Operation not permitted
- 01-01 00:16:00.931 827 827 E adsprpc : vendor/qcom/proprietary/adsprpc/src/fastrpc_apps_user.c:179::error: -1: dev != -1
- 01-01 00:16:00.931 827 827 E adsprpc : vendor/qcom/proprietary/adsprpc/src/fastrpc_apps_user.c:224::error: -1: 0 == (nErr = remotectl_open(name, (int*)ph, dlerrstr, sizeof(dlerrstr), &dlerr))
- 01-01 00:16:00.931 827 827 E adsprpc : vendor/qcom/proprietary/adsprpc/src/fastrpc_apps_user.c:126:/dev/adsprpc-smd device initialization error: No such file or directory
- 01-01 00:16:00.931 827 827 E adsprpc : vendor/qcom/proprietary/adsprpc/src/fastrpc_apps_user.c:179::error: -1: dev != -1
- 01-01 00:16:00.931 827 827 E adsprpc : vendor/qcom/proprietary/adsprpc/src/adsprpcd.c:23::error: -1: 0 == adsp_default_listener_register()
- 01-01 00:16:00.931 827 827 E adsprpc : vendor/qcom/proprietary/adsprpc/src/adsprpcd.c:36:adsprpcd exiting nErr=-1
- 02-01 21:13:53.885 0 0 I init : Service 'adsprpcd' (pid 827) exited with status 255
- 02-01 21:13:53.885 0 0 I init : Service 'adsprpcd' (pid 827) killing any children in process group
- 01-01 00:16:00.946 825 825 I keystore: Found keymaster0 module Keymaster QCOM HAL, version 3
- 01-01 00:16:00.946 825 825 I SoftKeymaster: system/keymaster/soft_keymaster_device.cpp, Line 122: Creating device
- 01-01 00:16:00.946 825 825 D SoftKeymaster: system/keymaster/soft_keymaster_device.cpp, Line 123: Device address: 0xb6ae4000
- 01-01 00:16:00.946 825 825 D QSEECOMAPI: : QSEECom_get_handle sb_length = 0x2000
- 01-01 00:16:00.946 825 825 D QSEECOMAPI: : App is not loaded in QSEE
- 01-01 00:16:00.946 825 825 E QSEECOMAPI: : Error::Cannot open the file /vendor/firmware/keymaster/keymaster.mdt
- 01-01 00:16:00.946 825 825 E QSEECOMAPI: : Error::Loading image failed with ret = -1
- 01-01 00:16:00.946 825 825 E QCOMKeyMaster: Loading keymaster app failed
- 01-01 00:16:00.946 825 825 E keystore: Error opening keystore keymaster0 device.
- 01-01 00:16:00.946 825 825 E keystore: keystore keymaster could not be initialized; exiting
- 02-01 21:13:53.900 0 0 I init : Service 'keystore' (pid 825) exited with status 1
- 02-01 21:13:53.900 0 0 I init : Service 'keystore' (pid 825) killing any children in process group
- 01-01 00:16:01.399 393 393 E msm8974_platform: platform_init: Unable to open the mixer card: 4
- 01-01 00:16:01.912 384 418 E use-Rlog/RLOG-RIL-QMI: qmi_client [384]: unable to connect to server, errno=[2:No such file or directory], attempt=32
- 02-01 21:13:55.639 0 0 I [SSP] : debug_work_func(1) - Sensor state: 0x3ffff, RC: 0, MS: 0 Santi: 0 Dump: 0
- 02-01 21:13:55.647 0 0 I : [SSP] Sensor Posision A : 6, G : 6, M: 3
- 01-01 00:16:02.912 384 418 E use-Rlog/RLOG-RIL-QMI: qmi_client [384]: unable to connect to server, errno=[2:No such file or directory], attempt=33
- 01-01 00:16:03.912 384 418 E use-Rlog/RLOG-RIL-QMI: qmi_client [384]: unable to connect to server, errno=[2:No such file or directory], attempt=34
- 01-01 00:16:04.912 384 418 E use-Rlog/RLOG-RIL-QMI: qmi_client [384]: unable to connect to server, errno=[2:No such file or directory], attempt=35
- 02-01 21:13:57.899 0 0 I msm_thermal: msm_therm_temp_log Debug Temp for Sensor:
- 01-01 00:16:05.913 384 418 E use-Rlog/RLOG-RIL-QMI: qmi_client [384]: unable to connect to server, errno=[2:No such file or directory], attempt=36
- 02-01 21:13:58.906 0 0 I msm_thermal: msm_therm_temp_log (0 --- 49)(1 --- 49)(2 --- 48)(3 --- 50)(4 --- 50)(5 --- 50)(6 --- 51)(7 --- 50)(8 --- 50)(9 --- 49)(10 --- 48)
- 02-01 21:13:58.906 0 0 I init : Starting service 'ril-daemon'...
- 02-01 21:13:58.906 0 0 I init : Starting service 'keystore'...
- 02-01 21:13:58.907 0 0 E init : Warning! Service qcamerasvr needs a SELinux domain defined; please fix!
- 02-01 21:13:58.907 0 0 I init : Starting service 'qcamerasvr'...
- 02-01 21:13:58.907 0 0 E init : Warning! Service adsprpcd needs a SELinux domain defined; please fix!
- 02-01 21:13:58.907 0 0 I init : Starting service 'adsprpcd'...
- 01-01 00:16:05.959 828 828 F libc : page record for 0xb6fa602c was not found (block_size=16)
- 01-01 00:16:05.960 830 830 F libc : page record for 0xb6eff02c was not found (block_size=16)
- 02-01 21:13:58.913 0 0 I init : Service 'ril-daemon' (pid 828) exited with status 1
- 02-01 21:13:58.913 0 0 I init : Service 'ril-daemon' (pid 828) killing any children in process group
- 02-01 21:13:58.913 0 0 I init : Service 'qcamerasvr' (pid 830) exited with status 1
- 02-01 21:13:58.913 0 0 I init : Service 'qcamerasvr' (pid 830) killing any children in process group
- 01-01 00:16:05.966 831 831 E adsprpc : vendor/qcom/proprietary/adsprpc/src/fastrpc_apps_user.c:126:/dev/adsprpc-smd device initialization error: Operation not permitted
- 01-01 00:16:05.966 831 831 E adsprpc : vendor/qcom/proprietary/adsprpc/src/fastrpc_apps_user.c:179::error: -1: dev != -1
- 01-01 00:16:05.966 831 831 E adsprpc : vendor/qcom/proprietary/adsprpc/src/fastrpc_apps_user.c:224::error: -1: 0 == (nErr = remotectl_open(name, (int*)ph, dlerrstr, sizeof(dlerrstr), &dlerr))
- 01-01 00:16:05.966 831 831 E adsprpc : vendor/qcom/proprietary/adsprpc/src/fastrpc_apps_user.c:126:/dev/adsprpc-smd device initialization error: No such file or directory
- 01-01 00:16:05.967 831 831 E adsprpc : vendor/qcom/proprietary/adsprpc/src/fastrpc_apps_user.c:179::error: -1: dev != -1
- 01-01 00:16:05.967 831 831 E adsprpc : vendor/qcom/proprietary/adsprpc/src/adsprpcd.c:23::error: -1: 0 == adsp_default_listener_register()
- 01-01 00:16:05.967 831 831 E adsprpc : vendor/qcom/proprietary/adsprpc/src/adsprpcd.c:36:adsprpcd exiting nErr=-1
- 02-01 21:13:58.920 0 0 I init : Service 'adsprpcd' (pid 831) exited with status 255
- 02-01 21:13:58.920 0 0 I init : Service 'adsprpcd' (pid 831) killing any children in process group
- 01-01 00:16:05.980 829 829 I keystore: Found keymaster0 module Keymaster QCOM HAL, version 3
- 01-01 00:16:05.981 829 829 I SoftKeymaster: system/keymaster/soft_keymaster_device.cpp, Line 122: Creating device
- 01-01 00:16:05.981 829 829 D SoftKeymaster: system/keymaster/soft_keymaster_device.cpp, Line 123: Device address: 0xb6b24000
- 01-01 00:16:05.981 829 829 D QSEECOMAPI: : QSEECom_get_handle sb_length = 0x2000
- 01-01 00:16:05.981 829 829 D QSEECOMAPI: : App is not loaded in QSEE
- 01-01 00:16:05.981 829 829 E QSEECOMAPI: : Error::Cannot open the file /vendor/firmware/keymaster/keymaster.mdt
- 01-01 00:16:05.981 829 829 E QSEECOMAPI: : Error::Loading image failed with ret = -1
- 01-01 00:16:05.981 829 829 E QCOMKeyMaster: Loading keymaster app failed
- 01-01 00:16:05.981 829 829 E keystore: Error opening keystore keymaster0 device.
- 01-01 00:16:05.981 829 829 E keystore: keystore keymaster could not be initialized; exiting
- 02-01 21:13:58.935 0 0 I init : Service 'keystore' (pid 829) exited with status 1
- 02-01 21:13:58.935 0 0 I init : Service 'keystore' (pid 829) killing any children in process group
- 01-01 00:16:06.400 393 393 E msm8974_platform: platform_init: Unable to open the mixer card: 5
- 01-01 00:16:06.913 384 418 E use-Rlog/RLOG-RIL-QMI: qmi_client [384]: unable to connect to server, errno=[2:No such file or directory], attempt=37
- 01-01 00:16:07.913 384 418 E use-Rlog/RLOG-RIL-QMI: qmi_client [384]: unable to connect to server, errno=[2:No such file or directory], attempt=38
- 01-01 00:16:08.913 384 418 E use-Rlog/RLOG-RIL-QMI: qmi_client [384]: unable to connect to server, errno=[2:No such file or directory], attempt=39
- 01-01 00:16:09.913 384 418 E use-Rlog/RLOG-RIL-QMI: qmi_client [384]: unable to connect to server, errno=[2:No such file or directory], attempt=40
- 02-01 21:14:02.909 0 0 I msm_thermal: msm_therm_temp_log Debug Temp for Sensor:
- 02-01 21:14:03.565 0 0 I msm_thermal: msm_therm_temp_log (0 --- 49)(1 --- 49)(2 --- 48)(3 --- 50)(4 --- 50)(5 --- 50)(6 --- 51)(7 --- 50)(8 --- 50)(9 --- 49)(10 --- 48)
- 02-01 21:14:03.565 0 0 I max77803_get_input_current: CHG_CNFG_09(0x12)
- 02-01 21:14:03.566 0 0 I max77803_get_input_current: CHG_CNFG_09(0x12)
- 02-01 21:14:03.567 0 0 I sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (4361), data(0x0000)
- 02-01 21:14:03.594 0 0 I sec-battery battery.94: sec_bat_get_temperature_by_adc: Temp(352), Temp-ADC(31786)
- 02-01 21:14:03.595 0 0 I sec-battery battery.94: sec_bat_get_temperature_by_adc: Temp(292), Temp-ADC(33000)
- 02-01 21:14:03.595 0 0 I sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (4361), data(0x0000)
- 02-01 21:14:03.595 0 0 I sec-fuelgauge 19-0036: sec_fg_get_scaled_capacity: scaled capacity (45.3)
- 02-01 21:14:03.595 0 0 I sec-battery battery.94: sec_bat_check_changed_soc: prev_reported_soc = 44, soc = 45
- 02-01 21:14:03.595 0 0 I sec-battery battery.94: sec_bat_get_battery_info:Vnow(3822mV),Inow(450mA),Imax(460mA),SOC(45%),Tbat(352),is_hc_usb(0)
- 02-01 21:14:03.595 0 0 I sec_bat_check_callback: battery->pdata->bat_irq_gpio(407)
- 02-01 21:14:03.595 0 0 I sec_bat_check_callback: Battery status(1)
- 02-01 21:14:03.595 0 0 I sec-battery battery.94: sec_bat_battery_cable_check: Battery Connected
- 02-01 21:14:03.596 0 0 I max77803_get_health_state: reg_data(0x3)
- 02-01 21:14:03.598 0 0 I max77803_get_health_state: vbus_state : 0x3, chg_dtls : 0x1
- 02-01 21:14:03.598 0 0 I sec-battery battery.94: sec_bat_monitor_work: Status(Charging), Mode(Normal), Health(Good), Cable(4), Vendor(SDI SDI), level(100%)
- 02-01 21:14:03.599 0 0 I sec-battery battery.94: sec_pogo_get_property: pogo charger is online (0)
- 02-01 21:14:03.599 0 0 I sec_chg_get_property: reg_data(93)
- 02-01 21:14:03.599 0 0 W healthd : sec-charger: Unknown power supply type
- 01-01 00:16:10.913 384 418 E use-Rlog/RLOG-RIL-QMI: qmi_client [384]: unable to connect to server, errno=[2:No such file or directory], attempt=41
- 01-01 00:16:10.994 832 832 F libc : page record for 0xb6f6602c was not found (block_size=16)
- 01-01 00:16:10.995 834 834 F libc : page record for 0xb6f5802c was not found (block_size=16)
- 02-01 21:14:03.941 0 0 I init : Starting service 'ril-daemon'...
- 02-01 21:14:03.941 0 0 I init : Starting service 'keystore'...
- 02-01 21:14:03.942 0 0 E init : Warning! Service qcamerasvr needs a SELinux domain defined; please fix!
- 02-01 21:14:03.942 0 0 I init : Starting service 'qcamerasvr'...
- 02-01 21:14:03.942 0 0 E init : Warning! Service adsprpcd needs a SELinux domain defined; please fix!
- 02-01 21:14:03.942 0 0 I init : Starting service 'adsprpcd'...
- 02-01 21:14:03.948 0 0 I init : Service 'ril-daemon' (pid 832) exited with status 1
- 02-01 21:14:03.948 0 0 I init : Service 'ril-daemon' (pid 832) killing any children in process group
- 02-01 21:14:03.948 0 0 I init : Service 'qcamerasvr' (pid 834) exited with status 1
- 02-01 21:14:03.948 0 0 I init : Service 'qcamerasvr' (pid 834) killing any children in process group
- 01-01 00:16:11.001 835 835 E adsprpc : vendor/qcom/proprietary/adsprpc/src/fastrpc_apps_user.c:126:/dev/adsprpc-smd device initialization error: Operation not permitted
- 01-01 00:16:11.001 835 835 E adsprpc : vendor/qcom/proprietary/adsprpc/src/fastrpc_apps_user.c:179::error: -1: dev != -1
- 01-01 00:16:11.001 835 835 E adsprpc : vendor/qcom/proprietary/adsprpc/src/fastrpc_apps_user.c:224::error: -1: 0 == (nErr = remotectl_open(name, (int*)ph, dlerrstr, sizeof(dlerrstr), &dlerr))
- 01-01 00:16:11.001 835 835 E adsprpc : vendor/qcom/proprietary/adsprpc/src/fastrpc_apps_user.c:126:/dev/adsprpc-smd device initialization error: No such file or directory
- 01-01 00:16:11.001 835 835 E adsprpc : vendor/qcom/proprietary/adsprpc/src/fastrpc_apps_user.c:179::error: -1: dev != -1
- 01-01 00:16:11.001 835 835 E adsprpc : vendor/qcom/proprietary/adsprpc/src/adsprpcd.c:23::error: -1: 0 == adsp_default_listener_register()
- 01-01 00:16:11.001 835 835 E adsprpc : vendor/qcom/proprietary/adsprpc/src/adsprpcd.c:36:adsprpcd exiting nErr=-1
- 02-01 21:14:03.954 0 0 I init : Service 'adsprpcd' (pid 835) exited with status 255
- 02-01 21:14:03.954 0 0 I init : Service 'adsprpcd' (pid 835) killing any children in process group
- 01-01 00:16:11.015 833 833 I keystore: Found keymaster0 module Keymaster QCOM HAL, version 3
- 01-01 00:16:11.015 833 833 I SoftKeymaster: system/keymaster/soft_keymaster_device.cpp, Line 122: Creating device
- 01-01 00:16:11.015 833 833 D SoftKeymaster: system/keymaster/soft_keymaster_device.cpp, Line 123: Device address: 0xb6ae4000
- 01-01 00:16:11.016 833 833 D QSEECOMAPI: : QSEECom_get_handle sb_length = 0x2000
- 01-01 00:16:11.016 833 833 D QSEECOMAPI: : App is not loaded in QSEE
- 01-01 00:16:11.016 833 833 E QSEECOMAPI: : Error::Cannot open the file /vendor/firmware/keymaster/keymaster.mdt
- 01-01 00:16:11.016 833 833 E QSEECOMAPI: : Error::Loading image failed with ret = -1
- 01-01 00:16:11.016 833 833 E QCOMKeyMaster: Loading keymaster app failed
- 01-01 00:16:11.016 833 833 E keystore: Error opening keystore keymaster0 device.
- 01-01 00:16:11.016 833 833 E keystore: keystore keymaster could not be initialized; exiting
- 02-01 21:14:03.970 0 0 I init : Service 'keystore' (pid 833) exited with status 1
- 02-01 21:14:03.970 0 0 I init : Service 'keystore' (pid 833) killing any children in process group
- 01-01 00:16:11.401 393 393 E msm8974_platform: platform_init: Unable to open the mixer card: 6
- 01-01 00:16:11.546 397 397 E use-Rlog/RLOG-RIL-QMI: linux_qmi_qmux_io.c: Unable to open port id /dev/smdcntl0, error [2:No such file or directory]
- 01-01 00:16:11.546 397 397 E use-Rlog/RLOG-RIL-RAWDATA: qmi_qmux_open_connection: QMI_QMUX_IO_PLATFORM_OPEN_CONN failed -1
- 01-01 00:16:11.546 397 397 E use-Rlog/RLOG-RIL-QMI: qmuxd: opening connection for RMNET0 [DATA5_CNTL] failed on attempt 1, Waiting 500 milliseconds before retry
- 01-01 00:16:11.913 384 418 E use-Rlog/RLOG-RIL-QMI: qmi_client [384]: unable to connect to server, errno=[2:No such file or directory], attempt=42
- 01-01 00:16:12.046 397 397 E use-Rlog/RLOG-RIL-QMI: linux_qmi_qmux_if_configure_port_timeout: mode=0, smd_timeout=20, hsic_timeout=60
- 01-01 00:16:12.046 397 397 E use-Rlog/RLOG-RIL-QMI: linux_qmi_qmux_if_configure_port_timeout: failed to open HSIC timeout config=/sys/devices/virtual/hsicctl/hsicctl0/modem_wait errno [2:No such file or directory]
- 02-01 21:14:05.001 0 0 E pil-q6v5-mss fc880000.qcom,mss: mba: Failed to locate mba.mdt
- 02-01 21:14:05.001 0 0 E modem_notifier_cb: sysmon_send_event error -19
- 02-01 21:14:05.001 0 0 E M-Notify: General: 5
- 02-01 21:14:05.001 0 0 E : smd_pkt_open failed on smd_pkt_dev id:0 - subsystem_get failed for modem
- 01-01 00:16:12.913 384 418 E use-Rlog/RLOG-RIL-QMI: qmi_client [384]: unable to connect to server, errno=[2:No such file or directory], attempt=43
- 02-01 21:14:06.639 0 0 I [SSP] : debug_work_func(1) - Sensor state: 0x3ffff, RC: 0, MS: 0 Santi: 0 Dump: 0
- 02-01 21:14:06.647 0 0 I : [SSP] Sensor Posision A : 6, G : 6, M: 3
- 01-01 00:16:13.913 384 418 E use-Rlog/RLOG-RIL-QMI: qmi_client [384]: unable to connect to server, errno=[2:No such file or directory], attempt=44
- 01-01 00:16:14.914 384 418 E use-Rlog/RLOG-RIL-QMI: qmi_client [384]: unable to connect to server, errno=[2:No such file or directory], attempt=45
- 02-01 21:14:07.919 0 0 I msm_thermal: msm_therm_temp_log Debug Temp for Sensor:
- 01-01 00:16:15.914 384 418 E use-Rlog/RLOG-RIL-QMI: qmi_client [384]: unable to connect to server, errno=[2:No such file or directory], attempt=46
- 02-01 21:14:08.976 0 0 I msm_thermal: msm_therm_temp_log (0 --- 49)(1 --- 49)(2 --- 48)(3 --- 50)(4 --- 50)(5 --- 50)(6 --- 51)(7 --- 50)(8 --- 50)(9 --- 49)(10 --- 48)
- 02-01 21:14:08.976 0 0 I init : Starting service 'ril-daemon'...
- 02-01 21:14:08.976 0 0 I init : Starting service 'keystore'...
- 02-01 21:14:08.977 0 0 E init : Warning! Service qcamerasvr needs a SELinux domain defined; please fix!
- 02-01 21:14:08.977 0 0 I init : Starting service 'qcamerasvr'...
- 02-01 21:14:08.977 0 0 E init : Warning! Service adsprpcd needs a SELinux domain defined; please fix!
- 02-01 21:14:08.977 0 0 I init : Starting service 'adsprpcd'...
- 01-01 00:16:16.029 837 837 F libc : page record for 0xb6f4f02c was not found (block_size=16)
- 01-01 00:16:16.030 839 839 F libc : page record for 0xb6fa202c was not found (block_size=16)
- 02-01 21:14:08.983 0 0 I init : Service 'ril-daemon' (pid 837) exited with status 1
- 02-01 21:14:08.983 0 0 I init : Service 'ril-daemon' (pid 837) killing any children in process group
- 02-01 21:14:08.983 0 0 I init : Service 'qcamerasvr' (pid 839) exited with status 1
- 02-01 21:14:08.983 0 0 I init : Service 'qcamerasvr' (pid 839) killing any children in process group
- 01-01 00:16:16.036 840 840 E adsprpc : vendor/qcom/proprietary/adsprpc/src/fastrpc_apps_user.c:126:/dev/adsprpc-smd device initialization error: Operation not permitted
- 01-01 00:16:16.036 840 840 E adsprpc : vendor/qcom/proprietary/adsprpc/src/fastrpc_apps_user.c:179::error: -1: dev != -1
- 01-01 00:16:16.036 840 840 E adsprpc : vendor/qcom/proprietary/adsprpc/src/fastrpc_apps_user.c:224::error: -1: 0 == (nErr = remotectl_open(name, (int*)ph, dlerrstr, sizeof(dlerrstr), &dlerr))
- 01-01 00:16:16.036 840 840 E adsprpc : vendor/qcom/proprietary/adsprpc/src/fastrpc_apps_user.c:126:/dev/adsprpc-smd device initialization error: No such file or directory
- 01-01 00:16:16.036 840 840 E adsprpc : vendor/qcom/proprietary/adsprpc/src/fastrpc_apps_user.c:179::error: -1: dev != -1
- 01-01 00:16:16.036 840 840 E adsprpc : vendor/qcom/proprietary/adsprpc/src/adsprpcd.c:23::error: -1: 0 == adsp_default_listener_register()
- 01-01 00:16:16.036 840 840 E adsprpc : vendor/qcom/proprietary/adsprpc/src/adsprpcd.c:36:adsprpcd exiting nErr=-1
- 02-01 21:14:08.990 0 0 I init : Service 'adsprpcd' (pid 840) exited with status 255
- 02-01 21:14:08.990 0 0 I init : Service 'adsprpcd' (pid 840) killing any children in process group
- 01-01 00:16:16.050 838 838 I keystore: Found keymaster0 module Keymaster QCOM HAL, version 3
- 01-01 00:16:16.050 838 838 I SoftKeymaster: system/keymaster/soft_keymaster_device.cpp, Line 122: Creating device
- 01-01 00:16:16.051 838 838 D SoftKeymaster: system/keymaster/soft_keymaster_device.cpp, Line 123: Device address: 0xb6ba4000
- 01-01 00:16:16.051 838 838 D QSEECOMAPI: : QSEECom_get_handle sb_length = 0x2000
- 01-01 00:16:16.051 838 838 D QSEECOMAPI: : App is not loaded in QSEE
- 01-01 00:16:16.051 838 838 E QSEECOMAPI: : Error::Cannot open the file /vendor/firmware/keymaster/keymaster.mdt
- 01-01 00:16:16.051 838 838 E QSEECOMAPI: : Error::Loading image failed with ret = -1
- 01-01 00:16:16.051 838 838 E QCOMKeyMaster: Loading keymaster app failed
- 01-01 00:16:16.051 838 838 E keystore: Error opening keystore keymaster0 device.
- 01-01 00:16:16.051 838 838 E keystore: keystore keymaster could not be initialized; exiting
- 02-01 21:14:09.005 0 0 I init : Service 'keystore' (pid 838) exited with status 1
- 02-01 21:14:09.005 0 0 I init : Service 'keystore' (pid 838) killing any children in process group
- 01-01 00:16:16.402 393 393 E msm8974_platform: platform_init: Unable to open the mixer card: 7
- 01-01 00:16:16.402 393 393 E msm8974_platform: platform_init: Unable to find correct sound card, aborting.
- 01-01 00:16:16.402 393 393 E audio_hw_primary: adev_open: Failed to init platform data, aborting.
- 01-01 00:16:16.402 393 393 E AudioFlinger: int android::load_audio_interface(const char*, audio_hw_device_t**) couldn't open audio hw device in audio.primary (Invalid argument)
- 01-01 00:16:16.402 393 393 I AudioFlinger: loadHwModule() error -22 loading module primary
- 01-01 00:16:16.402 393 393 W APM::AudioPolicyManager: could not open HW module primary
- 01-01 00:16:16.407 393 393 I bt_a2dp_hw: adev_open: adev_open in A2dp_hw module
- 01-01 00:16:16.407 393 393 I AudioFlinger: loadHwModule() Loaded a2dp audio interface from A2DP Audio HW HAL (audio) handle 1
- 01-01 00:16:16.409 393 393 I AudioFlinger: loadHwModule() Loaded usb audio interface from USB audio HW HAL (audio) handle 2
- 01-01 00:16:16.411 393 393 I r_submix: adev_open(name=audio_hw_if)
- 01-01 00:16:16.411 393 393 I r_submix: adev_init_check()
- 01-01 00:16:16.411 393 393 I AudioFlinger: loadHwModule() Loaded r_submix audio interface from Wifi Display audio HAL (audio) handle 3
- 01-01 00:16:16.411 393 393 D r_submix: adev_open_input_stream(addr=0)
- 01-01 00:16:16.411 393 393 D r_submix: submix_audio_device_create_pipe_l(addr=0, idx=9)
- 01-01 00:16:16.411 393 393 D r_submix: now using address 0 for route 9
- 01-01 00:16:16.411 393 393 E MonoPipe: Failed to fetch local time frequency when constructing a MonoPipe (res = -32). getNextWriteTimestamp calls will be non-functional
- 01-01 00:16:16.412 393 841 I AudioFlinger: AudioFlinger's thread 0xb44c0000 ready to run
- 01-01 00:16:16.412 393 393 D r_submix: adev_close_input_stream()
- 01-01 00:16:16.412 393 393 D r_submix: submix_audio_device_release_pipe_l(idx=9) addr=0
- 01-01 00:16:16.412 393 393 D r_submix: submix_audio_device_destroy_pipe_l(): pipe destroyed
- 01-01 00:16:16.412 393 393 W APM::AudioPolicyManager: Input device 00000001 unreachable
- 01-01 00:16:16.412 393 393 W APM::AudioPolicyManager: Input device 00000002 unreachable
- 01-01 00:16:16.412 393 393 W APM::AudioPolicyManager: Input device 80000004 unreachable
- 01-01 00:16:16.412 393 393 W APM::AudioPolicyManager: Input device 80000080 unreachable
- 01-01 00:16:16.412 393 393 W APM::AudioPolicyManager: Input device 80000040 unreachable
- 01-01 00:16:16.412 393 393 E APM::AudioPolicyManager: Default device 00000002 is unreachable
- 01-01 00:16:16.412 393 393 E APM::AudioPolicyManager: Failed to open primary output
- 01-01 00:16:16.412 393 393 E APM::AudioPolicyEngine: getDeviceForStrategy() speaker device not found for STRATEGY_SONIFICATION
- 01-01 00:16:16.412 393 393 E APM::AudioPolicyEngine: getDeviceForStrategy() speaker device not found for STRATEGY_SONIFICATION
- 01-01 00:16:16.412 393 393 E APM::AudioPolicyEngine: getDeviceForStrategy() no device found for STRATEGY_TRANSMITTED_THROUGH_SPEAKER
- 01-01 00:16:16.413 393 393 E SoundTriggerHwService: couldn't load sound trigger module sound_trigger.primary (No such file or directory)
- 01-01 00:16:16.414 393 393 I RadioService: RadioService
- 01-01 00:16:16.414 393 393 I RadioService: onFirstRef
- 01-01 00:16:16.414 393 393 E RadioService: couldn't load radio module radio.primary (No such file or directory)
- 01-01 00:16:16.914 384 418 E use-Rlog/RLOG-RIL-QMI: qmi_client [384]: unable to connect to server, errno=[2:No such file or directory], attempt=47
- 01-01 00:16:17.914 384 418 E use-Rlog/RLOG-RIL-QMI: qmi_client [384]: unable to connect to server, errno=[2:No such file or directory], attempt=48
- 01-01 00:16:18.914 384 418 E use-Rlog/RLOG-RIL-QMI: qmi_client [384]: unable to connect to server, errno=[2:No such file or directory], attempt=49
- 01-01 00:16:19.914 384 418 E use-Rlog/RLOG-RIL-QMI: qmi_client [384]: unable to connect to server, errno=[2:No such file or directory], attempt=50
- 02-01 21:14:12.929 0 0 I msm_thermal: msm_therm_temp_log Debug Temp for Sensor:
- 01-01 00:16:20.914 384 418 E use-Rlog/RLOG-RIL-QMI: qmi_client [384]: unable to connect to server, errno=[2:No such file or directory], attempt=51
- 01-01 00:16:21.064 843 843 F libc : page record for 0xb6f0b02c was not found (block_size=16)
- 01-01 00:16:21.065 845 845 F libc : page record for 0xb6f7502c was not found (block_size=16)
- 02-01 21:14:14.010 0 0 I msm_thermal: msm_therm_temp_log (0 --- 49)(1 --- 49)(2 --- 48)(3 --- 50)(4 --- 50)(5 --- 50)(6 --- 51)(7 --- 50)(8 --- 50)(9 --- 49)(10 --- 48)
- 02-01 21:14:14.010 0 0 I init : Starting service 'ril-daemon'...
- 02-01 21:14:14.011 0 0 I init : Starting service 'keystore'...
- 02-01 21:14:14.012 0 0 E init : Warning! Service qcamerasvr needs a SELinux domain defined; please fix!
- 02-01 21:14:14.012 0 0 I init : Starting service 'qcamerasvr'...
- 02-01 21:14:14.012 0 0 E init : Warning! Service adsprpcd needs a SELinux domain defined; please fix!
- 02-01 21:14:14.012 0 0 I init : Starting service 'adsprpcd'...
- 02-01 21:14:14.018 0 0 I init : Service 'ril-daemon' (pid 843) exited with status 1
- 02-01 21:14:14.018 0 0 I init : Service 'ril-daemon' (pid 843) killing any children in process group
- 02-01 21:14:14.018 0 0 I init : Service 'qcamerasvr' (pid 845) exited with status 1
- 02-01 21:14:14.018 0 0 I init : Service 'qcamerasvr' (pid 845) killing any children in process group
- 01-01 00:16:21.071 846 846 E adsprpc : vendor/qcom/proprietary/adsprpc/src/fastrpc_apps_user.c:126:/dev/adsprpc-smd device initialization error: Operation not permitted
- 01-01 00:16:21.071 846 846 E adsprpc : vendor/qcom/proprietary/adsprpc/src/fastrpc_apps_user.c:179::error: -1: dev != -1
- 01-01 00:16:21.071 846 846 E adsprpc : vendor/qcom/proprietary/adsprpc/src/fastrpc_apps_user.c:224::error: -1: 0 == (nErr = remotectl_open(name, (int*)ph, dlerrstr, sizeof(dlerrstr), &dlerr))
- 01-01 00:16:21.071 846 846 E adsprpc : vendor/qcom/proprietary/adsprpc/src/fastrpc_apps_user.c:126:/dev/adsprpc-smd device initialization error: No such file or directory
- 01-01 00:16:21.071 846 846 E adsprpc : vendor/qcom/proprietary/adsprpc/src/fastrpc_apps_user.c:179::error: -1: dev != -1
- 01-01 00:16:21.071 846 846 E adsprpc : vendor/qcom/proprietary/adsprpc/src/adsprpcd.c:23::error: -1: 0 == adsp_default_listener_register()
- 01-01 00:16:21.071 846 846 E adsprpc : vendor/qcom/proprietary/adsprpc/src/adsprpcd.c:36:adsprpcd exiting nErr=-1
- 02-01 21:14:14.025 0 0 I init : Service 'adsprpcd' (pid 846) exited with status 255
- 02-01 21:14:14.025 0 0 I init : Service 'adsprpcd' (pid 846) killing any children in process group
- 02-01 21:14:14.025 0 0 I max77803_get_input_current: CHG_CNFG_09(0x12)
- 02-01 21:14:14.026 0 0 I max77803_get_input_current: CHG_CNFG_09(0x12)
- 02-01 21:14:14.028 0 0 I sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (4361), data(0x0000)
- 01-01 00:16:21.086 844 844 I keystore: Found keymaster0 module Keymaster QCOM HAL, version 3
- 01-01 00:16:21.086 844 844 I SoftKeymaster: system/keymaster/soft_keymaster_device.cpp, Line 122: Creating device
- 01-01 00:16:21.086 844 844 D SoftKeymaster: system/keymaster/soft_keymaster_device.cpp, Line 123: Device address: 0xb6b24000
- 01-01 00:16:21.086 844 844 D QSEECOMAPI: : QSEECom_get_handle sb_length = 0x2000
- 01-01 00:16:21.086 844 844 D QSEECOMAPI: : App is not loaded in QSEE
- 01-01 00:16:21.086 844 844 E QSEECOMAPI: : Error::Cannot open the file /vendor/firmware/keymaster/keymaster.mdt
- 01-01 00:16:21.086 844 844 E QSEECOMAPI: : Error::Loading image failed with ret = -1
- 01-01 00:16:21.086 844 844 E QCOMKeyMaster: Loading keymaster app failed
- 01-01 00:16:21.086 844 844 E keystore: Error opening keystore keymaster0 device.
- 01-01 00:16:21.087 844 844 E keystore: keystore keymaster could not be initialized; exiting
- 02-01 21:14:14.041 0 0 I init : Service 'keystore' (pid 844) exited with status 1
- 02-01 21:14:14.041 0 0 I init : Service 'keystore' (pid 844) killing any children in process group
- 02-01 21:14:14.054 0 0 I sec-battery battery.94: sec_bat_get_temperature_by_adc: Temp(352), Temp-ADC(31782)
- 02-01 21:14:14.055 0 0 I sec-battery battery.94: sec_bat_get_temperature_by_adc: Temp(292), Temp-ADC(33000)
- 02-01 21:14:14.056 0 0 I sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (4361), data(0x0000)
- 02-01 21:14:14.056 0 0 I sec-fuelgauge 19-0036: sec_fg_get_scaled_capacity: scaled capacity (45.3)
- 02-01 21:14:14.056 0 0 I sec-battery battery.94: sec_bat_get_battery_info:Vnow(3821mV),Inow(450mA),Imax(460mA),SOC(45%),Tbat(352),is_hc_usb(0)
- 02-01 21:14:14.056 0 0 I sec_bat_check_callback: battery->pdata->bat_irq_gpio(407)
- 02-01 21:14:14.056 0 0 I sec_bat_check_callback: Battery status(1)
- 02-01 21:14:14.056 0 0 I sec-battery battery.94: sec_bat_battery_cable_check: Battery Connected
- 02-01 21:14:14.056 0 0 I max77803_get_health_state: reg_data(0x3)
- 02-01 21:14:14.058 0 0 I max77803_get_health_state: vbus_state : 0x3, chg_dtls : 0x1
- 02-01 21:14:14.058 0 0 I sec-battery battery.94: sec_bat_monitor_work: Status(Charging), Mode(Normal), Health(Good), Cable(4), Vendor(SDI SDI), level(100%)
- 02-01 21:14:14.059 0 0 I sec-battery battery.94: sec_pogo_get_property: pogo charger is online (0)
- 02-01 21:14:14.060 0 0 I sec_chg_get_property: reg_data(93)
- 02-01 21:14:14.060 0 0 W healthd : sec-charger: Unknown power supply type
- 01-01 00:16:21.915 384 418 E use-Rlog/RLOG-RIL-QMI: qmi_client [384]: unable to connect to server, errno=[2:No such file or directory], attempt=52
- 01-01 00:16:22.915 384 418 E use-Rlog/RLOG-RIL-QMI: qmi_client [384]: unable to connect to server, errno=[2:No such file or directory], attempt=53
- 01-01 00:16:23.915 384 418 E use-Rlog/RLOG-RIL-QMI: qmi_client [384]: unable to connect to server, errno=[2:No such file or directory], attempt=54
- 02-01 21:14:17.639 0 0 I [SSP] : debug_work_func(2) - Sensor state: 0x3ffff, RC: 0, MS: 0 Santi: 0 Dump: 0
- 02-01 21:14:17.645 0 0 I : [SSP] Sensor Posision A : 6, G : 6, M: 3
- 01-01 00:16:24.915 384 418 E use-Rlog/RLOG-RIL-QMI: qmi_client [384]: unable to connect to server, errno=[2:No such file or directory], attempt=55
- 02-01 21:14:17.939 0 0 I msm_thermal: msm_therm_temp_log Debug Temp for Sensor:
- 01-01 00:16:25.915 384 418 E use-Rlog/RLOG-RIL-QMI: qmi_client [384]: unable to connect to server, errno=[2:No such file or directory], attempt=56
- 02-01 21:14:19.046 0 0 I msm_thermal: msm_therm_temp_log (0 --- 49)(1 --- 49)(2 --- 48)(3 --- 50)(4 --- 50)(5 --- 50)(6 --- 51)(7 --- 50)(8 --- 50)(9 --- 49)(10 --- 48)
- 02-01 21:14:19.046 0 0 I init : Starting service 'ril-daemon'...
- 02-01 21:14:19.047 0 0 I init : Starting service 'keystore'...
- 02-01 21:14:19.047 0 0 E init : Warning! Service qcamerasvr needs a SELinux domain defined; please fix!
- 02-01 21:14:19.047 0 0 I init : Starting service 'qcamerasvr'...
- 02-01 21:14:19.048 0 0 E init : Warning! Service adsprpcd needs a SELinux domain defined; please fix!
- 02-01 21:14:19.048 0 0 I init : Starting service 'adsprpcd'...
- 01-01 00:16:26.100 847 847 F libc : page record for 0xb6ec002c was not found (block_size=16)
- 01-01 00:16:26.101 849 849 F libc : page record for 0xb6f4c02c was not found (block_size=16)
- 02-01 21:14:19.053 0 0 I init : Service 'ril-daemon' (pid 847) exited with status 1
- 02-01 21:14:19.053 0 0 I init : Service 'ril-daemon' (pid 847) killing any children in process group
- 02-01 21:14:19.053 0 0 E : reading MSM_THERM_CH [rc = 0] [adc_code = 30111]
- 02-01 21:14:19.054 0 0 I init : Service 'qcamerasvr' (pid 849) exited with status 1
- 02-01 21:14:19.054 0 0 I init : Service 'qcamerasvr' (pid 849) killing any children in process group
- 01-01 00:16:26.107 850 850 E adsprpc : vendor/qcom/proprietary/adsprpc/src/fastrpc_apps_user.c:126:/dev/adsprpc-smd device initialization error: Operation not permitted
- 01-01 00:16:26.107 850 850 E adsprpc : vendor/qcom/proprietary/adsprpc/src/fastrpc_apps_user.c:179::error: -1: dev != -1
- 01-01 00:16:26.107 850 850 E adsprpc : vendor/qcom/proprietary/adsprpc/src/fastrpc_apps_user.c:224::error: -1: 0 == (nErr = remotectl_open(name, (int*)ph, dlerrstr, sizeof(dlerrstr), &dlerr))
- 01-01 00:16:26.107 850 850 E adsprpc : vendor/qcom/proprietary/adsprpc/src/fastrpc_apps_user.c:126:/dev/adsprpc-smd device initialization error: No such file or directory
- 01-01 00:16:26.107 850 850 E adsprpc : vendor/qcom/proprietary/adsprpc/src/fastrpc_apps_user.c:179::error: -1: dev != -1
- 01-01 00:16:26.107 850 850 E adsprpc : vendor/qcom/proprietary/adsprpc/src/adsprpcd.c:23::error: -1: 0 == adsp_default_listener_register()
- 01-01 00:16:26.107 850 850 E adsprpc : vendor/qcom/proprietary/adsprpc/src/adsprpcd.c:36:adsprpcd exiting nErr=-1
- 02-01 21:14:19.060 0 0 I init : Service 'adsprpcd' (pid 850) exited with status 255
- 02-01 21:14:19.060 0 0 I init : Service 'adsprpcd' (pid 850) killing any children in process group
- 01-01 00:16:26.121 848 848 I keystore: Found keymaster0 module Keymaster QCOM HAL, version 3
- 01-01 00:16:26.121 848 848 I SoftKeymaster: system/keymaster/soft_keymaster_device.cpp, Line 122: Creating device
- 01-01 00:16:26.121 848 848 D SoftKeymaster: system/keymaster/soft_keymaster_device.cpp, Line 123: Device address: 0xb6ba4000
- 01-01 00:16:26.121 848 848 D QSEECOMAPI: : QSEECom_get_handle sb_length = 0x2000
- 01-01 00:16:26.121 848 848 D QSEECOMAPI: : App is not loaded in QSEE
- 01-01 00:16:26.122 848 848 E QSEECOMAPI: : Error::Cannot open the file /vendor/firmware/keymaster/keymaster.mdt
- 01-01 00:16:26.122 848 848 E QSEECOMAPI: : Error::Loading image failed with ret = -1
- 01-01 00:16:26.122 848 848 E QCOMKeyMaster: Loading keymaster app failed
- 01-01 00:16:26.122 848 848 E keystore: Error opening keystore keymaster0 device.
- 01-01 00:16:26.122 848 848 E keystore: keystore keymaster could not be initialized; exiting
- 02-01 21:14:19.076 0 0 I init : Service 'keystore' (pid 848) exited with status 1
- 02-01 21:14:19.076 0 0 I init : Service 'keystore' (pid 848) killing any children in process group
- 02-01 21:14:19.080 0 0 I sec-thermistor: sec_therm_polling_work: adc=30110
- 02-01 21:14:19.080 0 0 I sec-thermistor: sec_therm_polling_work: temper=444
- 02-01 21:14:19.084 0 0 E : reading LR_MUX9_PU2_AMUX_THM5 [rc = 0] [adc_code = 30541]
- 02-01 21:14:19.088 0 0 E : reading LR_MUX9_PU2_AMUX_THM5 [rc = 0] [adc_code = 30541]
- 02-01 21:14:19.093 0 0 E : reading LR_MUX9_PU2_AMUX_THM5 [rc = 0] [adc_code = 30539]
- 02-01 21:14:19.097 0 0 E : reading LR_MUX9_PU2_AMUX_THM5 [rc = 0] [adc_code = 30539]
- 02-01 21:14:19.101 0 0 E : reading LR_MUX9_PU2_AMUX_THM5 [rc = 0] [adc_code = 30541]
- 02-01 21:14:19.106 0 0 E : reading LR_MUX9_PU2_AMUX_THM5 [rc = 0] [adc_code = 30540]
- 02-01 21:14:19.110 0 0 E : reading LR_MUX9_PU2_AMUX_THM5 [rc = 0] [adc_code = 30540]
- 02-01 21:14:19.110 0 0 I sec-thermistor: sec_therm_polling_work: adc_flash=30540
- 02-01 21:14:19.110 0 0 I sec-thermistor: sec_therm_polling_work: temper_flash=423
- 02-01 21:14:19.110 0 0 I sec-thermistor: notify_change_of_temperature: siop_level=-1
- 02-01 21:14:19.110 0 0 I sec-thermistor: notify_change_of_temperature: uevent: SUBTEMPERATURE=444
- 01-01 00:16:26.916 384 418 E use-Rlog/RLOG-RIL-QMI: qmi_client [384]: unable to connect to server, errno=[2:No such file or directory], attempt=57
- 01-01 00:16:27.916 384 418 E use-Rlog/RLOG-RIL-QMI: qmi_client [384]: unable to connect to server, errno=[2:No such file or directory], attempt=58
- 01-01 00:16:28.916 384 418 E use-Rlog/RLOG-RIL-QMI: qmi_client [384]: unable to connect to server, errno=[2:No such file or directory], attempt=59
- 01-01 00:16:29.916 384 418 E use-Rlog/RLOG-RIL-QMI: qmi_client [384]: unable to connect to server, errno=[2:No such file or directory], attempt=60
- 02-01 21:14:22.949 0 0 I msm_thermal: msm_therm_temp_log Debug Temp for Sensor:
- 01-01 00:16:30.917 384 418 E use-Rlog/RLOG-RIL-QMI: qmi_client [384]: unable to connect to server after 60 tries... giving up
- 01-01 00:16:30.917 384 418 E use-Rlog/RLOG-RIL-QMI: qmi_qmux_if_pwr_up_init_ex: Initialization failed, rc = -1
- 01-01 00:16:30.917 384 418 E QMI_FW : QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
- 01-01 00:16:30.917 384 418 E use-Rlog/RLOG-RIL-QMI: qmi_client [384]: unable to connect to server, errno=[2:No such file or directory], attempt=1
- 01-01 00:16:31.135 851 851 F libc : page record for 0xb6f5f02c was not found (block_size=16)
- 01-01 00:16:31.136 853 853 F libc : page record for 0xb6f6002c was not found (block_size=16)
- 01-01 00:16:31.142 854 854 E adsprpc : vendor/qcom/proprietary/adsprpc/src/fastrpc_apps_user.c:126:/dev/adsprpc-smd device initialization error: Operation not permitted
- 01-01 00:16:31.142 854 854 E adsprpc : vendor/qcom/proprietary/adsprpc/src/fastrpc_apps_user.c:179::error: -1: dev != -1
- 01-01 00:16:31.142 854 854 E adsprpc : vendor/qcom/proprietary/adsprpc/src/fastrpc_apps_user.c:224::error: -1: 0 == (nErr = remotectl_open(name, (int*)ph, dlerrstr, sizeof(dlerrstr), &dlerr))
- 01-01 00:16:31.142 854 854 E adsprpc : vendor/qcom/proprietary/adsprpc/src/fastrpc_apps_user.c:126:/dev/adsprpc-smd device initialization error: No such file or directory
- 01-01 00:16:31.142 854 854 E adsprpc : vendor/qcom/proprietary/adsprpc/src/fastrpc_apps_user.c:179::error: -1: dev != -1
- 01-01 00:16:31.142 854 854 E adsprpc : vendor/qcom/proprietary/adsprpc/src/adsprpcd.c:23::error: -1: 0 == adsp_default_listener_register()
- 01-01 00:16:31.142 854 854 E adsprpc : vendor/qcom/proprietary/adsprpc/src/adsprpcd.c:36:adsprpcd exiting nErr=-1
- 02-01 21:14:24.081 0 0 I init : Starting service 'ril-daemon'...
- 02-01 21:14:24.082 0 0 I init : Starting service 'keystore'...
- 02-01 21:14:24.082 0 0 E init : Warning! Service qcamerasvr needs a SELinux domain defined; please fix!
- 02-01 21:14:24.082 0 0 I init : Starting service 'qcamerasvr'...
- 02-01 21:14:24.083 0 0 E init : Warning! Service adsprpcd needs a SELinux domain defined; please fix!
- 02-01 21:14:24.083 0 0 I init : Starting service 'adsprpcd'...
- 02-01 21:14:24.088 0 0 I init : Service 'ril-daemon' (pid 851) exited with status 1
- 02-01 21:14:24.088 0 0 I init : Service 'ril-daemon' (pid 851) killing any children in process group
- 02-01 21:14:24.089 0 0 I init : Service 'qcamerasvr' (pid 853) exited with status 1
- 02-01 21:14:24.089 0 0 I init : Service 'qcamerasvr' (pid 853) killing any children in process group
- 02-01 21:14:24.095 0 0 I max77803_get_input_current: CHG_CNFG_09(0x12)
- 02-01 21:14:24.095 0 0 I init : Service 'adsprpcd' (pid 854) exited with status 255
- 02-01 21:14:24.095 0 0 I init : Service 'adsprpcd' (pid 854) killing any children in process group
- 02-01 21:14:24.096 0 0 I max77803_get_input_current: CHG_CNFG_09(0x12)
- 02-01 21:14:24.098 0 0 I sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (4361), data(0x0000)
- 01-01 00:16:31.157 852 852 I keystore: Found keymaster0 module Keymaster QCOM HAL, version 3
- 01-01 00:16:31.157 852 852 I SoftKeymaster: system/keymaster/soft_keymaster_device.cpp, Line 122: Creating device
- 01-01 00:16:31.157 852 852 D SoftKeymaster: system/keymaster/soft_keymaster_device.cpp, Line 123: Device address: 0xb6ba4000
- 01-01 00:16:31.157 852 852 D QSEECOMAPI: : QSEECom_get_handle sb_length = 0x2000
- 01-01 00:16:31.157 852 852 D QSEECOMAPI: : App is not loaded in QSEE
- 01-01 00:16:31.157 852 852 E QSEECOMAPI: : Error::Cannot open the file /vendor/firmware/keymaster/keymaster.mdt
- 01-01 00:16:31.157 852 852 E QSEECOMAPI: : Error::Loading image failed with ret = -1
- 01-01 00:16:31.157 852 852 E QCOMKeyMaster: Loading keymaster app failed
- 01-01 00:16:31.157 852 852 E keystore: Error opening keystore keymaster0 device.
- 01-01 00:16:31.157 852 852 E keystore: keystore keymaster could not be initialized; exiting
- 02-01 21:14:24.111 0 0 I init : Service 'keystore' (pid 852) exited with status 1
- 02-01 21:14:24.111 0 0 I init : Service 'keystore' (pid 852) killing any children in process group
- 02-01 21:14:24.124 0 0 I sec-battery battery.94: sec_bat_get_temperature_by_adc: Temp(352), Temp-ADC(31782)
- 02-01 21:14:24.125 0 0 I sec-battery battery.94: sec_bat_get_temperature_by_adc: Temp(292), Temp-ADC(33000)
- 02-01 21:14:24.126 0 0 I sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (4361), data(0x0000)
- 02-01 21:14:24.126 0 0 I sec-fuelgauge 19-0036: sec_fg_get_scaled_capacity: scaled capacity (45.3)
- 02-01 21:14:24.126 0 0 I sec-battery battery.94: sec_bat_get_battery_info:Vnow(3822mV),Inow(450mA),Imax(460mA),SOC(45%),Tbat(352),is_hc_usb(0)
- 02-01 21:14:24.126 0 0 I sec_bat_check_callback: battery->pdata->bat_irq_gpio(407)
- 02-01 21:14:24.126 0 0 I sec_bat_check_callback: Battery status(1)
- 02-01 21:14:24.126 0 0 I sec-battery battery.94: sec_bat_battery_cable_check: Battery Connected
- 02-01 21:14:24.126 0 0 I max77803_get_health_state: reg_data(0x3)
- 02-01 21:14:24.128 0 0 I max77803_get_health_state: vbus_state : 0x3, chg_dtls : 0x1
- 02-01 21:14:24.128 0 0 I sec-battery battery.94: sec_bat_time_management: Charging Time : 125 secs
- 02-01 21:14:24.128 0 0 I sec-battery battery.94: sec_bat_temperature: HLT(2000) HLR(2000) HT(600), HR(400), LT(-50), LR(0)
- 02-01 21:14:24.128 0 0 I sec-battery battery.94: sec_bat_fullcharged_check: Charging Mode : Normal
- 02-01 21:14:24.128 0 0 I sec-battery battery.94: sec_bat_monitor_work: Status(Charging), Mode(Normal), Health(Good), Cable(4), Vendor(SDI SDI), level(100%)
- 02-01 21:14:24.129 0 0 I sec-battery battery.94: sec_pogo_get_property: pogo charger is online (0)
- 02-01 21:14:24.129 0 0 I sec_chg_get_property: reg_data(93)
- 02-01 21:14:24.129 0 0 W healthd : sec-charger: Unknown power supply type
- 01-01 00:16:31.917 384 418 E use-Rlog/RLOG-RIL-QMI: qmi_client [384]: unable to connect to server, errno=[2:No such file or directory], attempt=2
- 01-01 00:16:32.106 397 397 E use-Rlog/RLOG-RIL-QMI: linux_qmi_qmux_io.c: Unable to open port id /dev/smdcntl0, error [2:No such file or directory]
- 01-01 00:16:32.106 397 397 E use-Rlog/RLOG-RIL-RAWDATA: qmi_qmux_open_connection: QMI_QMUX_IO_PLATFORM_OPEN_CONN failed -1
- 01-01 00:16:32.106 397 397 E use-Rlog/RLOG-RIL-QMI: qmuxd: opening connection for RMNET0 [DATA5_CNTL] failed on attempt 2, Waiting 500 milliseconds before retry
- 01-01 00:16:32.606 397 397 E use-Rlog/RLOG-RIL-QMI: linux_qmi_qmux_if_configure_port_timeout: mode=0, smd_timeout=20, hsic_timeout=60
- 01-01 00:16:32.606 397 397 E use-Rlog/RLOG-RIL-QMI: linux_qmi_qmux_if_configure_port_timeout: failed to open HSIC timeout config=/sys/devices/virtual/hsicctl/hsicctl0/modem_wait errno [2:No such file or directory]
- 02-01 21:14:25.561 0 0 E pil-q6v5-mss fc880000.qcom,mss: mba: Failed to locate mba.mdt
- 02-01 21:14:25.561 0 0 E modem_notifier_cb: sysmon_send_event error -19
- 02-01 21:14:25.561 0 0 E M-Notify: General: 5
- 02-01 21:14:25.561 0 0 E : smd_pkt_open failed on smd_pkt_dev id:0 - subsystem_get failed for modem
- 01-01 00:16:32.917 384 418 E use-Rlog/RLOG-RIL-QMI: qmi_client [384]: unable to connect to server, errno=[2:No such file or directory], attempt=3
- 01-01 00:16:33.917 384 418 E use-Rlog/RLOG-RIL-QMI: qmi_client [384]: unable to connect to server, errno=[2:No such file or directory], attempt=4
- 01-01 00:16:34.917 384 418 E use-Rlog/RLOG-RIL-QMI: qmi_client [384]: unable to connect to server, errno=[2:No such file or directory], attempt=5
- 02-01 21:14:27.959 0 0 I msm_thermal: msm_therm_temp_log Debug Temp for Sensor:
- 02-01 21:14:28.639 0 0 I msm_thermal: msm_therm_temp_log (0 --- 49)(1 --- 49)(2 --- 48)(3 --- 50)(4 --- 50)(5 --- 50)(6 --- 51)(7 --- 50)(8 --- 50)(9 --- 49)(10 --- 48)
- 02-01 21:14:28.639 0 0 I [SSP] : debug_work_func(1) - Sensor state: 0x3ffff, RC: 0, MS: 0 Santi: 0 Dump: 0
- 02-01 21:14:28.647 0 0 I : [SSP] Sensor Posision A : 6, G : 6, M: 3
- 01-01 00:16:35.917 384 418 E use-Rlog/RLOG-RIL-QMI: qmi_client [384]: unable to connect to server, errno=[2:No such file or directory], attempt=6
- 02-01 21:14:29.117 0 0 I init : Starting service 'ril-daemon'...
- 02-01 21:14:29.117 0 0 I init : Starting service 'keystore'...
- 02-01 21:14:29.118 0 0 E init : Warning! Service qcamerasvr needs a SELinux domain defined; please fix!
- 02-01 21:14:29.118 0 0 I init : Starting service 'qcamerasvr'...
- 02-01 21:14:29.118 0 0 E init : Warning! Service adsprpcd needs a SELinux domain defined; please fix!
- 02-01 21:14:29.118 0 0 I init : Starting service 'adsprpcd'...
- 01-01 00:16:36.170 856 856 F libc : page record for 0xb6f4d02c was not found (block_size=16)
- 01-01 00:16:36.171 858 858 F libc : page record for 0xb6f9702c was not found (block_size=16)
- 02-01 21:14:29.124 0 0 I init : Service 'ril-daemon' (pid 856) exited with status 1
- 02-01 21:14:29.124 0 0 I init : Service 'ril-daemon' (pid 856) killing any children in process group
- 02-01 21:14:29.125 0 0 I init : Service 'qcamerasvr' (pid 858) exited with status 1
- 02-01 21:14:29.125 0 0 I init : Service 'qcamerasvr' (pid 858) killing any children in process group
- 01-01 00:16:36.177 859 859 E adsprpc : vendor/qcom/proprietary/adsprpc/src/fastrpc_apps_user.c:126:/dev/adsprpc-smd device initialization error: Operation not permitted
- 01-01 00:16:36.177 859 859 E adsprpc : vendor/qcom/proprietary/adsprpc/src/fastrpc_apps_user.c:179::error: -1: dev != -1
- 01-01 00:16:36.177 859 859 E adsprpc : vendor/qcom/proprietary/adsprpc/src/fastrpc_apps_user.c:224::error: -1: 0 == (nErr = remotectl_open(name, (int*)ph, dlerrstr, sizeof(dlerrstr), &dlerr))
- 01-01 00:16:36.177 859 859 E adsprpc : vendor/qcom/proprietary/adsprpc/src/fastrpc_apps_user.c:126:/dev/adsprpc-smd device initialization error: No such file or directory
- 01-01 00:16:36.177 859 859 E adsprpc : vendor/qcom/proprietary/adsprpc/src/fastrpc_apps_user.c:179::error: -1: dev != -1
- 01-01 00:16:36.178 859 859 E adsprpc : vendor/qcom/proprietary/adsprpc/src/adsprpcd.c:23::error: -1: 0 == adsp_default_listener_register()
- 01-01 00:16:36.178 859 859 E adsprpc : vendor/qcom/proprietary/adsprpc/src/adsprpcd.c:36:adsprpcd exiting nErr=-1
- 02-01 21:14:29.131 0 0 I init : Service 'adsprpcd' (pid 859) exited with status 255
- 02-01 21:14:29.131 0 0 I init : Service 'adsprpcd' (pid 859) killing any children in process group
- 01-01 00:16:36.191 857 857 I keystore: Found keymaster0 module Keymaster QCOM HAL, version 3
- 01-01 00:16:36.192 857 857 I SoftKeymaster: system/keymaster/soft_keymaster_device.cpp, Line 122: Creating device
- 01-01 00:16:36.192 857 857 D SoftKeymaster: system/keymaster/soft_keymaster_device.cpp, Line 123: Device address: 0xb6ae4000
- 01-01 00:16:36.192 857 857 D QSEECOMAPI: : QSEECom_get_handle sb_length = 0x2000
- 01-01 00:16:36.192 857 857 D QSEECOMAPI: : App is not loaded in QSEE
- 01-01 00:16:36.192 857 857 E QSEECOMAPI: : Error::Cannot open the file /vendor/firmware/keymaster/keymaster.mdt
- 01-01 00:16:36.192 857 857 E QSEECOMAPI: : Error::Loading image failed with ret = -1
- 01-01 00:16:36.192 857 857 E QCOMKeyMaster: Loading keymaster app failed
- 01-01 00:16:36.192 857 857 E keystore: Error opening keystore keymaster0 device.
- 01-01 00:16:36.192 857 857 E keystore: keystore keymaster could not be initialized; exiting
- 02-01 21:14:29.146 0 0 I init : Service 'keystore' (pid 857) exited with status 1
- 02-01 21:14:29.146 0 0 I init : Service 'keystore' (pid 857) killing any children in process group
- 01-01 00:16:36.918 384 418 E use-Rlog/RLOG-RIL-QMI: qmi_client [384]: unable to connect to server, errno=[2:No such file or directory], attempt=7
- 01-01 00:16:37.918 384 418 E use-Rlog/RLOG-RIL-QMI: qmi_client [384]: unable to connect to server, errno=[2:No such file or directory], attempt=8
- 01-01 00:16:38.918 384 418 E use-Rlog/RLOG-RIL-QMI: qmi_client [384]: unable to connect to server, errno=[2:No such file or directory], attempt=9
- 01-01 00:16:39.918 384 418 E use-Rlog/RLOG-RIL-QMI: qmi_client [384]: unable to connect to server, errno=[2:No such file or directory], attempt=10
- 02-01 21:14:32.969 0 0 I msm_thermal: msm_therm_temp_log Debug Temp for Sensor:
- 01-01 00:16:40.918 384 418 E use-Rlog/RLOG-RIL-QMI: qmi_client [384]: unable to connect to server, errno=[2:No such file or directory], attempt=11
- 02-01 21:14:34.136 0 0 I msm_thermal: msm_therm_temp_log (0 --- 49)(1 --- 49)(2 --- 48)(3 --- 50)(4 --- 50)(5 --- 50)(6 --- 51)(7 --- 50)(8 --- 50)(9 --- 49)(10 --- 48)
- 02-01 21:14:34.136 0 0 I max77803_get_input_current: CHG_CNFG_09(0x12)
- 02-01 21:14:34.136 0 0 I max77803_get_input_current: CHG_CNFG_09(0x12)
- 02-01 21:14:34.138 0 0 I sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (4361), data(0x0000)
- 01-01 00:16:41.205 860 860 F libc : page record for 0xb6ed402c was not found (block_size=16)
- 02-01 21:14:34.152 0 0 I init : Starting service 'ril-daemon'...
- 02-01 21:14:34.152 0 0 I init : Starting service 'keystore'...
- 02-01 21:14:34.153 0 0 E init : Warning! Service qcamerasvr needs a SELinux domain defined; please fix!
- 02-01 21:14:34.153 0 0 I init : Starting service 'qcamerasvr'...
- 02-01 21:14:34.153 0 0 E init : Warning! Service adsprpcd needs a SELinux domain defined; please fix!
- 01-01 00:16:41.206 862 862 F libc : page record for 0xb6f0102c was not found (block_size=16)
- 02-01 21:14:34.153 0 0 I init : Starting service 'adsprpcd'...
- 02-01 21:14:34.159 0 0 I init : Service 'ril-daemon' (pid 860) exited with status 1
- 02-01 21:14:34.159 0 0 I init : Service 'ril-daemon' (pid 860) killing any children in process group
- 02-01 21:14:34.159 0 0 I init : Service 'qcamerasvr' (pid 862) exited with status 1
- 02-01 21:14:34.159 0 0 I init : Service 'qcamerasvr' (pid 862) killing any children in process group
- 01-01 00:16:41.212 863 863 E adsprpc : vendor/qcom/proprietary/adsprpc/src/fastrpc_apps_user.c:126:/dev/adsprpc-smd device initialization error: Operation not permitted
- 01-01 00:16:41.212 863 863 E adsprpc : vendor/qcom/proprietary/adsprpc/src/fastrpc_apps_user.c:179::error: -1: dev != -1
- 01-01 00:16:41.212 863 863 E adsprpc : vendor/qcom/proprietary/adsprpc/src/fastrpc_apps_user.c:224::error: -1: 0 == (nErr = remotectl_open(name, (int*)ph, dlerrstr, sizeof(dlerrstr), &dlerr))
- 01-01 00:16:41.212 863 863 E adsprpc : vendor/qcom/proprietary/adsprpc/src/fastrpc_apps_user.c:126:/dev/adsprpc-smd device initialization error: No such file or directory
- 01-01 00:16:41.212 863 863 E adsprpc : vendor/qcom/proprietary/adsprpc/src/fastrpc_apps_user.c:179::error: -1: dev != -1
- 01-01 00:16:41.212 863 863 E adsprpc : vendor/qcom/proprietary/adsprpc/src/adsprpcd.c:23::error: -1: 0 == adsp_default_listener_register()
- 01-01 00:16:41.212 863 863 E adsprpc : vendor/qcom/proprietary/adsprpc/src/adsprpcd.c:36:adsprpcd exiting nErr=-1
- 02-01 21:14:34.164 0 0 I sec-battery battery.94: sec_bat_get_temperature_by_adc: Temp(352), Temp-ADC(31779)
- 02-01 21:14:34.165 0 0 I sec-battery battery.94: sec_bat_get_temperature_by_adc: Temp(292), Temp-ADC(33000)
- 02-01 21:14:34.165 0 0 I init : Service 'adsprpcd' (pid 863) exited with status 255
- 02-01 21:14:34.166 0 0 I init : Service 'adsprpcd' (pid 863) killing any children in process group
- 02-01 21:14:34.166 0 0 I sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (4361), data(0x0000)
- 02-01 21:14:34.166 0 0 I sec-fuelgauge 19-0036: sec_fg_get_scaled_capacity: scaled capacity (45.3)
- 02-01 21:14:34.166 0 0 I sec-battery battery.94: sec_bat_get_battery_info:Vnow(3821mV),Inow(450mA),Imax(460mA),SOC(45%),Tbat(352),is_hc_usb(0)
- 02-01 21:14:34.166 0 0 I sec_bat_check_callback: battery->pdata->bat_irq_gpio(407)
- 02-01 21:14:34.166 0 0 I sec_bat_check_callback: Battery status(1)
- 02-01 21:14:34.166 0 0 I sec-battery battery.94: sec_bat_battery_cable_check: Battery Connected
- 02-01 21:14:34.167 0 0 I max77803_get_health_state: reg_data(0x3)
- 02-01 21:14:34.168 0 0 I max77803_get_health_state: vbus_state : 0x3, chg_dtls : 0x1
- 02-01 21:14:34.168 0 0 I sec-battery battery.94: sec_bat_monitor_work: Status(Charging), Mode(Normal), Health(Good), Cable(4), Vendor(SDI SDI), level(100%)
- 02-01 21:14:34.169 0 0 I sec-battery battery.94: sec_pogo_get_property: pogo charger is online (0)
- 02-01 21:14:34.170 0 0 I sec_chg_get_property: reg_data(93)
- 02-01 21:14:34.170 0 0 W healthd : sec-charger: Unknown power supply type
- 01-01 00:16:41.227 861 861 I keystore: Found keymaster0 module Keymaster QCOM HAL, version 3
- 01-01 00:16:41.227 861 861 I SoftKeymaster: system/keymaster/soft_keymaster_device.cpp, Line 122: Creating device
- 01-01 00:16:41.227 861 861 D SoftKeymaster: system/keymaster/soft_keymaster_device.cpp, Line 123: Device address: 0xb6b64000
- 01-01 00:16:41.227 861 861 D QSEECOMAPI: : QSEECom_get_handle sb_length = 0x2000
- 01-01 00:16:41.227 861 861 D QSEECOMAPI: : App is not loaded in QSEE
- 01-01 00:16:41.227 861 861 E QSEECOMAPI: : Error::Cannot open the file /vendor/firmware/keymaster/keymaster.mdt
- 01-01 00:16:41.227 861 861 E QSEECOMAPI: : Error::Loading image failed with ret = -1
- 01-01 00:16:41.227 861 861 E QCOMKeyMaster: Loading keymaster app failed
- 01-01 00:16:41.227 861 861 E keystore: Error opening keystore keymaster0 device.
- 01-01 00:16:41.228 861 861 E keystore: keystore keymaster could not be initialized; exiting
- 02-01 21:14:34.181 0 0 I init : Service 'keystore' (pid 861) exited with status 1
- 02-01 21:14:34.182 0 0 I init : Service 'keystore' (pid 861) killing any children in process group
- 01-01 00:16:41.918 384 418 E use-Rlog/RLOG-RIL-QMI: qmi_client [384]: unable to connect to server, errno=[2:No such file or directory], attempt=12
- 02-01 21:14:34.947 0 0 I : adb_release
- 02-01 21:14:34.947 0 0 I dwc3 f9200000.dwc3: gadget android_usb data soft-disconnect
- 02-01 21:14:34.947 0 0 E dwc3 f9200000.dwc3: request ea37ef00 was not queued to ep0out
- 02-01 21:14:34.947 0 0 D usb : usb_remove_config cdev->config=e8ac7a80, config=e8ac7a80
- 02-01 21:14:34.947 0 0 I : DUN is unregisterd
- 02-01 21:14:34.947 0 0 I : adb_open
- 02-01 21:14:34.947 0 0 I : mtp_bind_config
- 02-01 21:14:34.947 0 0 I : DUN is registerd
- 02-01 21:14:34.947 0 0 I : adb_bind_config
- 02-01 21:14:34.947 0 0 I dwc3 f9200000.dwc3: gadget android_usb data soft-connect
- 02-01 21:14:35.047 0 0 I android_work: android_work: did not send uevent (1 1 (null))
- 02-01 21:14:35.143 0 0 I usb : : dwc3_gadget_reset_interrupt
- 02-01 21:14:35.143 0 0 D usb : composite_disconnect
- 02-01 21:14:35.143 0 0 I android_work: android_work: sent uevent USB_STATE=DISCONNECTED
- 02-01 21:14:35.193 0 0 I usb : : dwc3_gadget_conndone_interrupt (HS)
- 02-01 21:14:35.194 0 0 I android_work: android_work: did not send uevent (0 0 (null))
- 02-01 21:14:35.277 0 0 D usb : GET_DES
- 02-01 21:14:35.277 0 0 I android_work: android_work: sent uevent USB_STATE=CONNECTED
- 02-01 21:14:35.305 0 0 D usb : GET_DES
- 02-01 21:14:35.305 0 0 D usb : set_config_number single config num=0
- 02-01 21:14:35.305 0 0 D usb : set_interface_count next_interface_id=4
- 02-01 21:14:35.544 0 0 D usb : GET_DES
- 02-01 21:14:35.545 0 0 D usb : set_config_number single config num=0
- 02-01 21:14:35.545 0 0 D usb : set_interface_count next_interface_id=4
- 02-01 21:14:35.545 0 0 D usb : set_config_number single config num=0
- 02-01 21:14:35.545 0 0 D usb : set_interface_count next_interface_id=4
- 02-01 21:14:35.545 0 0 I android_usb gadget: high-speed config #1: fe8050c8.android_usb
- 02-01 21:14:35.545 0 0 D : acm ttyGS0 serial state 0000
- 02-01 21:14:35.545 0 0 D usb : SET_CON
- 02-01 21:14:35.545 0 0 D usb : set_config_number single config num=0
- 02-01 21:14:35.599 0 0 I android_work: android_work: sent uevent USB_STATE=CONFIGURED
- 01-01 00:16:42.919 384 418 E use-Rlog/RLOG-RIL-QMI: qmi_client [384]: unable to connect to server, errno=[2:No such file or directory], attempt=13
- 01-01 00:16:43.919 384 418 E use-Rlog/RLOG-RIL-QMI: qmi_client [384]: unable to connect to server, errno=[2:No such file or directory], attempt=14
- 01-01 00:16:44.919 384 418 E use-Rlog/RLOG-RIL-QMI: qmi_client [384]: unable to connect to server, errno=[2:No such file or directory], attempt=15
- 02-01 21:14:37.979 0 0 I msm_thermal: msm_therm_temp_log Debug Temp for Sensor:
- 01-01 00:16:45.919 384 418 E use-Rlog/RLOG-RIL-QMI: qmi_client [384]: unable to connect to server, errno=[2:No such file or directory], attempt=16
- 02-01 21:14:39.187 0 0 I msm_thermal: msm_therm_temp_log (0 --- 49)(1 --- 49)(2 --- 48)(3 --- 50)(4 --- 50)(5 --- 50)(6 --- 51)(7 --- 50)(8 --- 50)(9 --- 49)(10 --- 48)
- 02-01 21:14:39.187 0 0 I init : Starting service 'ril-daemon'...
- 02-01 21:14:39.188 0 0 I init : Starting service 'keystore'...
- 02-01 21:14:39.188 0 0 E init : Warning! Service qcamerasvr needs a SELinux domain defined; please fix!
- 02-01 21:14:39.188 0 0 I init : Starting service 'qcamerasvr'...
- 02-01 21:14:39.189 0 0 E init : Warning! Service adsprpcd needs a SELinux domain defined; please fix!
- 02-01 21:14:39.189 0 0 I init : Starting service 'adsprpcd'...
- 01-01 00:16:46.241 866 866 F libc : page record for 0xb6f2202c was not found (block_size=16)
- 01-01 00:16:46.242 868 868 F libc : page record for 0xb6edc02c was not found (block_size=16)
- 02-01 21:14:39.194 0 0 I init : Service 'ril-daemon' (pid 866) exited with status 1
- 02-01 21:14:39.194 0 0 I init : Service 'ril-daemon' (pid 866) killing any children in process group
- 02-01 21:14:39.195 0 0 I init : Service 'qcamerasvr' (pid 868) exited with status 1
- 02-01 21:14:39.195 0 0 I init : Service 'qcamerasvr' (pid 868) killing any children in process group
- 01-01 00:16:46.247 869 869 E adsprpc : vendor/qcom/proprietary/adsprpc/src/fastrpc_apps_user.c:126:/dev/adsprpc-smd device initialization error: Operation not permitted
- 01-01 00:16:46.247 869 869 E adsprpc : vendor/qcom/proprietary/adsprpc/src/fastrpc_apps_user.c:179::error: -1: dev != -1
- 01-01 00:16:46.247 869 869 E adsprpc : vendor/qcom/proprietary/adsprpc/src/fastrpc_apps_user.c:224::error: -1: 0 == (nErr = remotectl_open(name, (int*)ph, dlerrstr, sizeof(dlerrstr), &dlerr))
- 01-01 00:16:46.247 869 869 E adsprpc : vendor/qcom/proprietary/adsprpc/src/fastrpc_apps_user.c:126:/dev/adsprpc-smd device initialization error: No such file or directory
- 01-01 00:16:46.247 869 869 E adsprpc : vendor/qcom/proprietary/adsprpc/src/fastrpc_apps_user.c:179::error: -1: dev != -1
- 01-01 00:16:46.247 869 869 E adsprpc : vendor/qcom/proprietary/adsprpc/src/adsprpcd.c:23::error: -1: 0 == adsp_default_listener_register()
- 01-01 00:16:46.247 869 869 E adsprpc : vendor/qcom/proprietary/adsprpc/src/adsprpcd.c:36:adsprpcd exiting nErr=-1
- 02-01 21:14:39.201 0 0 I init : Service 'adsprpcd' (pid 869) exited with status 255
- 02-01 21:14:39.201 0 0 I init : Service 'adsprpcd' (pid 869) killing any children in process group
- 01-01 00:16:46.262 867 867 I keystore: Found keymaster0 module Keymaster QCOM HAL, version 3
- 01-01 00:16:46.262 867 867 I SoftKeymaster: system/keymaster/soft_keymaster_device.cpp, Line 122: Creating device
- 01-01 00:16:46.262 867 867 D SoftKeymaster: system/keymaster/soft_keymaster_device.cpp, Line 123: Device address: 0xb6ae4000
- 01-01 00:16:46.262 867 867 D QSEECOMAPI: : QSEECom_get_handle sb_length = 0x2000
- 01-01 00:16:46.262 867 867 D QSEECOMAPI: : App is not loaded in QSEE
- 01-01 00:16:46.262 867 867 E QSEECOMAPI: : Error::Cannot open the file /vendor/firmware/keymaster/keymaster.mdt
- 01-01 00:16:46.262 867 867 E QSEECOMAPI: : Error::Loading image failed with ret = -1
- 01-01 00:16:46.262 867 867 E QCOMKeyMaster: Loading keymaster app failed
- 01-01 00:16:46.262 867 867 E keystore: Error opening keystore keymaster0 device.
- 01-01 00:16:46.262 867 867 E keystore: keystore keymaster could not be initialized; exiting
- 02-01 21:14:39.216 0 0 I init : Service 'keystore' (pid 867) exited with status 1
- 02-01 21:14:39.216 0 0 I init : Service 'keystore' (pid 867) killing any children in process group
- 02-01 21:14:39.639 0 0 I [SSP] : debug_work_func(1) - Sensor state: 0x3ffff, RC: 0, MS: 0 Santi: 0 Dump: 0
- 02-01 21:14:39.647 0 0 I : [SSP] Sensor Posision A : 6, G : 6, M: 3
- 01-01 00:16:46.919 384 418 E use-Rlog/RLOG-RIL-QMI: qmi_client [384]: unable to connect to server, errno=[2:No such file or directory], attempt=17
- 01-01 00:16:47.919 384 418 E use-Rlog/RLOG-RIL-QMI: qmi_client [384]: unable to connect to server, errno=[2:No such file or directory], attempt=18
- 01-01 00:16:48.919 384 418 E use-Rlog/RLOG-RIL-QMI: qmi_client [384]: unable to connect to server, errno=[2:No such file or directory], attempt=19
- 01-01 00:16:49.920 384 418 E use-Rlog/RLOG-RIL-QMI: qmi_client [384]: unable to connect to server, errno=[2:No such file or directory], attempt=20
- 02-01 21:14:42.989 0 0 I msm_thermal: msm_therm_temp_log Debug Temp for Sensor:
- 01-01 00:16:50.920 384 418 E use-Rlog/RLOG-RIL-QMI: qmi_client [384]: unable to connect to server, errno=[2:No such file or directory], attempt=21
- 02-01 21:14:44.185 0 0 I msm_thermal: msm_therm_temp_log (0 --- 49)(1 --- 49)(2 --- 48)(3 --- 50)(4 --- 50)(5 --- 50)(6 --- 51)(7 --- 50)(8 --- 50)(9 --- 49)(10 --- 48)
- 02-01 21:14:44.185 0 0 I max77803_get_input_current: CHG_CNFG_09(0x12)
- 02-01 21:14:44.185 0 0 I max77803_get_input_current: CHG_CNFG_09(0x12)
- 02-01 21:14:44.187 0 0 I sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (4361), data(0x0000)
- 02-01 21:14:44.213 0 0 I sec-battery battery.94: sec_bat_get_temperature_by_adc: Temp(352), Temp-ADC(31779)
- 02-01 21:14:44.214 0 0 I sec-battery battery.94: sec_bat_get_temperature_by_adc: Temp(292), Temp-ADC(33000)
- 02-01 21:14:44.215 0 0 I sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (4361), data(0x0000)
- 02-01 21:14:44.215 0 0 I sec-fuelgauge 19-0036: sec_fg_get_scaled_capacity: scaled capacity (45.3)
- 02-01 21:14:44.215 0 0 I sec-battery battery.94: sec_bat_get_battery_info:Vnow(3822mV),Inow(450mA),Imax(460mA),SOC(45%),Tbat(352),is_hc_usb(0)
- 02-01 21:14:44.215 0 0 I sec_bat_check_callback: battery->pdata->bat_irq_gpio(407)
- 02-01 21:14:44.215 0 0 I sec_bat_check_callback: Battery status(1)
- 02-01 21:14:44.215 0 0 I sec-battery battery.94: sec_bat_battery_cable_check: Battery Connected
- 02-01 21:14:44.216 0 0 I max77803_get_health_state: reg_data(0x3)
- 02-01 21:14:44.217 0 0 I max77803_get_health_state: vbus_state : 0x3, chg_dtls : 0x1
- 02-01 21:14:44.217 0 0 I sec-battery battery.94: sec_bat_monitor_work: Status(Charging), Mode(Normal), Health(Good), Cable(4), Vendor(SDI SDI), level(100%)
- 02-01 21:14:44.218 0 0 I sec-battery battery.94: sec_pogo_get_property: pogo charger is online (0)
- 02-01 21:14:44.219 0 0 I sec_chg_get_property: reg_data(93)
- 02-01 21:14:44.219 0 0 W healthd : sec-charger: Unknown power supply type
- 02-01 21:14:44.219 0 0 I init : Starting service 'ril-daemon'...
- 01-01 00:16:51.273 870 870 F libc : page record for 0xb6f3602c was not found (block_size=16)
- 01-01 00:16:51.274 872 872 F libc : page record for 0xb6ef702c was not found (block_size=16)
- 02-01 21:14:44.220 0 0 I init : Starting service 'keystore'...
- 02-01 21:14:44.220 0 0 E init : Warning! Service qcamerasvr needs a SELinux domain defined; please fix!
- 02-01 21:14:44.220 0 0 I init : Starting service 'qcamerasvr'...
- 02-01 21:14:44.221 0 0 E init : Warning! Service adsprpcd needs a SELinux domain defined; please fix!
- 02-01 21:14:44.221 0 0 I init : Starting service 'adsprpcd'...
- 02-01 21:14:44.226 0 0 I init : Service 'ril-daemon' (pid 870) exited with status 1
- 02-01 21:14:44.226 0 0 I init : Service 'ril-daemon' (pid 870) killing any children in process group
- 02-01 21:14:44.227 0 0 I init : Service 'qcamerasvr' (pid 872) exited with status 1
- 02-01 21:14:44.227 0 0 I init : Service 'qcamerasvr' (pid 872) killing any children in process group
- 01-01 00:16:51.279 873 873 E adsprpc : vendor/qcom/proprietary/adsprpc/src/fastrpc_apps_user.c:126:/dev/adsprpc-smd device initialization error: Operation not permitted
- 01-01 00:16:51.279 873 873 E adsprpc : vendor/qcom/proprietary/adsprpc/src/fastrpc_apps_user.c:179::error: -1: dev != -1
- 01-01 00:16:51.280 873 873 E adsprpc : vendor/qcom/proprietary/adsprpc/src/fastrpc_apps_user.c:224::error: -1: 0 == (nErr = remotectl_open(name, (int*)ph, dlerrstr, sizeof(dlerrstr), &dlerr))
- 01-01 00:16:51.280 873 873 E adsprpc : vendor/qcom/proprietary/adsprpc/src/fastrpc_apps_user.c:126:/dev/adsprpc-smd device initialization error: No such file or directory
- 01-01 00:16:51.280 873 873 E adsprpc : vendor/qcom/proprietary/adsprpc/src/fastrpc_apps_user.c:179::error: -1: dev != -1
- 01-01 00:16:51.280 873 873 E adsprpc : vendor/qcom/proprietary/adsprpc/src/adsprpcd.c:23::error: -1: 0 == adsp_default_listener_register()
- 01-01 00:16:51.280 873 873 E adsprpc : vendor/qcom/proprietary/adsprpc/src/adsprpcd.c:36:adsprpcd exiting nErr=-1
- 02-01 21:14:44.233 0 0 I init : Service 'adsprpcd' (pid 873) exited with status 255
- 02-01 21:14:44.233 0 0 I init : Service 'adsprpcd' (pid 873) killing any children in process group
- 01-01 00:16:51.294 871 871 I keystore: Found keymaster0 module Keymaster QCOM HAL, version 3
- 01-01 00:16:51.294 871 871 I SoftKeymaster: system/keymaster/soft_keymaster_device.cpp, Line 122: Creating device
- 01-01 00:16:51.294 871 871 D SoftKeymaster: system/keymaster/soft_keymaster_device.cpp, Line 123: Device address: 0xb6ba4000
- 01-01 00:16:51.295 871 871 D QSEECOMAPI: : QSEECom_get_handle sb_length = 0x2000
- 01-01 00:16:51.295 871 871 D QSEECOMAPI: : App is not loaded in QSEE
- 01-01 00:16:51.295 871 871 E QSEECOMAPI: : Error::Cannot open the file /vendor/firmware/keymaster/keymaster.mdt
- 02-01 21:14:44.249 0 0 I init : Service 'keystore' (pid 871) exited with status 1
- 01-01 00:16:51.295 871 871 E QSEECOMAPI: : Error::Loading image failed with ret = -1
- 01-01 00:16:51.295 871 871 E QCOMKeyMaster: Loading keymaster app failed
- 02-01 21:14:44.249 0 0 I init : Service 'keystore' (pid 871) killing any children in process group
- 01-01 00:16:51.295 871 871 E keystore: Error opening keystore keymaster0 device.
- 01-01 00:16:51.295 871 871 E keystore: keystore keymaster could not be initialized; exiting
- 01-01 00:16:51.920 384 418 E use-Rlog/RLOG-RIL-QMI: qmi_client [384]: unable to connect to server, errno=[2:No such file or directory], attempt=22
- 01-01 00:16:52.706 397 397 E use-Rlog/RLOG-RIL-QMI: linux_qmi_qmux_io.c: Unable to open port id /dev/smdcntl0, error [2:No such file or directory]
- 01-01 00:16:52.706 397 397 E use-Rlog/RLOG-RIL-RAWDATA: qmi_qmux_open_connection: QMI_QMUX_IO_PLATFORM_OPEN_CONN failed -1
- 01-01 00:16:52.706 397 397 E use-Rlog/RLOG-RIL-QMI: qmuxd: opening connection for RMNET0 [DATA5_CNTL] failed on attempt 3, Waiting 500 milliseconds before retry
- 01-01 00:16:52.920 384 418 E use-Rlog/RLOG-RIL-QMI: qmi_client [384]: unable to connect to server, errno=[2:No such file or directory], attempt=23
- 01-01 00:16:53.206 397 397 E use-Rlog/RLOG-RIL-QMI: linux_qmi_qmux_if_configure_port_timeout: mode=0, smd_timeout=20, hsic_timeout=60
- 01-01 00:16:53.206 397 397 E use-Rlog/RLOG-RIL-QMI: linux_qmi_qmux_if_configure_port_timeout: failed to open HSIC timeout config=/sys/devices/virtual/hsicctl/hsicctl0/modem_wait errno [2:No such file or directory]
- 02-01 21:14:46.161 0 0 E pil-q6v5-mss fc880000.qcom,mss: mba: Failed to locate mba.mdt
- 02-01 21:14:46.161 0 0 E modem_notifier_cb: sysmon_send_event error -19
- 02-01 21:14:46.161 0 0 E M-Notify: General: 5
- 02-01 21:14:46.161 0 0 E : smd_pkt_open failed on smd_pkt_dev id:0 - subsystem_get failed for modem
- 01-01 00:16:53.920 384 418 E use-Rlog/RLOG-RIL-QMI: qmi_client [384]: unable to connect to server, errno=[2:No such file or directory], attempt=24
- 01-01 00:16:54.921 384 418 E use-Rlog/RLOG-RIL-QMI: qmi_client [384]: unable to connect to server, errno=[2:No such file or directory], attempt=25
- 02-01 21:14:47.999 0 0 I msm_thermal: msm_therm_temp_log Debug Temp for Sensor:
- 01-01 00:16:55.921 384 418 E use-Rlog/RLOG-RIL-QMI: qmi_client [384]: unable to connect to server, errno=[2:No such file or directory], attempt=26
- 02-01 21:14:49.254 0 0 I msm_thermal: msm_therm_temp_log (0 --- 49)(1 --- 49)(2 --- 48)(3 --- 50)(4 --- 50)(5 --- 50)(6 --- 51)(7 --- 50)(8 --- 50)(9 --- 49)(10 --- 48)
- 02-01 21:14:49.254 0 0 I init : Starting service 'ril-daemon'...
- 02-01 21:14:49.255 0 0 I init : Starting service 'keystore'...
- 02-01 21:14:49.255 0 0 E init : Warning! Service qcamerasvr needs a SELinux domain defined; please fix!
- 02-01 21:14:49.255 0 0 I init : Starting service 'qcamerasvr'...
- 02-01 21:14:49.256 0 0 E init : Warning! Service adsprpcd needs a SELinux domain defined; please fix!
- 02-01 21:14:49.256 0 0 I init : Starting service 'adsprpcd'...
- 01-01 00:16:56.308 875 875 F libc : page record for 0xb6f7a02c was not found (block_size=16)
- 01-01 00:16:56.309 877 877 F libc : page record for 0xb6ed002c was not found (block_size=16)
- 01-01 00:16:56.315 878 878 E adsprpc : vendor/qcom/proprietary/adsprpc/src/fastrpc_apps_user.c:126:/dev/adsprpc-smd device initialization error: Operation not permitted
- 02-01 21:14:49.261 0 0 I init : Service 'ril-daemon' (pid 875) exited with status 1
- 01-01 00:16:56.315 878 878 E adsprpc : vendor/qcom/proprietary/adsprpc/src/fastrpc_apps_user.c:179::error: -1: dev != -1
- 02-01 21:14:49.261 0 0 I init : Service 'ril-daemon' (pid 875) killing any children in process group
- 01-01 00:16:56.315 878 878 E adsprpc : vendor/qcom/proprietary/adsprpc/src/fastrpc_apps_user.c:224::error: -1: 0 == (nErr = remotectl_open(name, (int*)ph, dlerrstr, sizeof(dlerrstr), &dlerr))
- 02-01 21:14:49.262 0 0 I init : Service 'qcamerasvr' (pid 877) exited with status 1
- 01-01 00:16:56.315 878 878 E adsprpc : vendor/qcom/proprietary/adsprpc/src/fastrpc_apps_user.c:126:/dev/adsprpc-smd device initialization error: No such file or directory
- 02-01 21:14:49.262 0 0 I init : Service 'qcamerasvr' (pid 877) killing any children in process group
- 01-01 00:16:56.315 878 878 E adsprpc : vendor/qcom/proprietary/adsprpc/src/fastrpc_apps_user.c:179::error: -1: dev != -1
- 02-01 21:14:49.264 0 0 E : reading MSM_THERM_CH [rc = 0] [adc_code = 30107]
- 01-01 00:16:56.315 878 878 E adsprpc : vendor/qcom/proprietary/adsprpc/src/adsprpcd.c:23::error: -1: 0 == adsp_default_listener_register()
- 02-01 21:14:49.269 0 0 I init : Service 'adsprpcd' (pid 878) exited with status 255
- 01-01 00:16:56.315 878 878 E adsprpc : vendor/qcom/proprietary/adsprpc/src/adsprpcd.c:36:adsprpcd exiting nErr=-1
- 02-01 21:14:49.269 0 0 I init : Service 'adsprpcd' (pid 878) killing any children in process group
- 01-01 00:16:56.329 876 876 I keystore: Found keymaster0 module Keymaster QCOM HAL, version 3
- 01-01 00:16:56.329 876 876 I SoftKeymaster: system/keymaster/soft_keymaster_device.cpp, Line 122: Creating device
- 01-01 00:16:56.329 876 876 D SoftKeymaster: system/keymaster/soft_keymaster_device.cpp, Line 123: Device address: 0xb6b64000
- 01-01 00:16:56.330 876 876 D QSEECOMAPI: : QSEECom_get_handle sb_length = 0x2000
- 01-01 00:16:56.330 876 876 D QSEECOMAPI: : App is not loaded in QSEE
- 01-01 00:16:56.330 876 876 E QSEECOMAPI: : Error::Cannot open the file /vendor/firmware/keymaster/keymaster.mdt
- 01-01 00:16:56.330 876 876 E QSEECOMAPI: : Error::Loading image failed with ret = -1
- 01-01 00:16:56.330 876 876 E QCOMKeyMaster: Loading keymaster app failed
- 01-01 00:16:56.330 876 876 E keystore: Error opening keystore keymaster0 device.
- 01-01 00:16:56.330 876 876 E keystore: keystore keymaster could not be initialized; exiting
- 02-01 21:14:49.284 0 0 I init : Service 'keystore' (pid 876) exited with status 1
- 02-01 21:14:49.284 0 0 I init : Service 'keystore' (pid 876) killing any children in process group
- 02-01 21:14:49.290 0 0 I sec-thermistor: sec_therm_polling_work: adc=30106
- 02-01 21:14:49.290 0 0 I sec-thermistor: sec_therm_polling_work: temper=445
- 02-01 21:14:49.294 0 0 E : reading LR_MUX9_PU2_AMUX_THM5 [rc = 0] [adc_code = 30534]
- 02-01 21:14:49.299 0 0 E : reading LR_MUX9_PU2_AMUX_THM5 [rc = 0] [adc_code = 30533]
- 02-01 21:14:49.303 0 0 E : reading LR_MUX9_PU2_AMUX_THM5 [rc = 0] [adc_code = 30534]
- 02-01 21:14:49.307 0 0 E : reading LR_MUX9_PU2_AMUX_THM5 [rc = 0] [adc_code = 30532]
- 02-01 21:14:49.312 0 0 E : reading LR_MUX9_PU2_AMUX_THM5 [rc = 0] [adc_code = 30534]
- 02-01 21:14:49.316 0 0 E : reading LR_MUX9_PU2_AMUX_THM5 [rc = 0] [adc_code = 30533]
- 02-01 21:14:49.320 0 0 E : reading LR_MUX9_PU2_AMUX_THM5 [rc = 0] [adc_code = 30533]
- 02-01 21:14:49.320 0 0 I sec-thermistor: sec_therm_polling_work: adc_flash=30533
- 02-01 21:14:49.320 0 0 I sec-thermistor: sec_therm_polling_work: temper_flash=423
- 02-01 21:14:49.320 0 0 I sec-thermistor: notify_change_of_temperature: siop_level=-1
- 02-01 21:14:49.320 0 0 I sec-thermistor: notify_change_of_temperature: uevent: SUBTEMPERATURE=445
- 01-01 00:16:56.921 384 418 E use-Rlog/RLOG-RIL-QMI: qmi_client [384]: unable to connect to server, errno=[2:No such file or directory], attempt=27
- 02-01 21:14:50.639 0 0 I [SSP] : debug_work_func(1) - Sensor state: 0x3ffff, RC: 0, MS: 0 Santi: 0 Dump: 0
- 02-01 21:14:50.647 0 0 I : [SSP] Sensor Posision A : 6, G : 6, M: 3
- 01-01 00:16:57.921 384 418 E use-Rlog/RLOG-RIL-QMI: qmi_client [384]: unable to connect to server, errno=[2:No such file or directory], attempt=28
- 01-01 00:16:58.921 384 418 E use-Rlog/RLOG-RIL-QMI: qmi_client [384]: unable to connect to server, errno=[2:No such file or directory], attempt=29
- 01-01 00:16:59.921 384 418 E use-Rlog/RLOG-RIL-QMI: qmi_client [384]: unable to connect to server, errno=[2:No such file or directory], attempt=30
- 02-01 21:14:53.009 0 0 I msm_thermal: msm_therm_temp_log Debug Temp for Sensor:
- 01-01 00:17:00.921 384 418 E use-Rlog/RLOG-RIL-QMI: qmi_client [384]: unable to connect to server, errno=[2:No such file or directory], attempt=31
- 02-01 21:14:54.245 0 0 I msm_thermal: msm_therm_temp_log (0 --- 49)(1 --- 49)(2 --- 48)(3 --- 50)(4 --- 50)(5 --- 50)(6 --- 51)(7 --- 50)(8 --- 50)(9 --- 49)(10 --- 48)
- 02-01 21:14:54.245 0 0 I max77803_get_input_current: CHG_CNFG_09(0x12)
- 02-01 21:14:54.245 0 0 I max77803_get_input_current: CHG_CNFG_09(0x12)
- 02-01 21:14:54.247 0 0 I sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (4361), data(0x0000)
- 02-01 21:14:54.273 0 0 I sec-battery battery.94: sec_bat_get_temperature_by_adc: Temp(352), Temp-ADC(31778)
- 02-01 21:14:54.274 0 0 I sec-battery battery.94: sec_bat_get_temperature_by_adc: Temp(292), Temp-ADC(33000)
- 02-01 21:14:54.275 0 0 I sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (4361), data(0x0000)
- 02-01 21:14:54.275 0 0 I sec-fuelgauge 19-0036: sec_fg_get_scaled_capacity: scaled capacity (45.3)
- 02-01 21:14:54.275 0 0 I sec-battery battery.94: sec_bat_get_battery_info:Vnow(3821mV),Inow(450mA),Imax(460mA),SOC(45%),Tbat(352),is_hc_usb(0)
- 02-01 21:14:54.275 0 0 I sec_bat_check_callback: battery->pdata->bat_irq_gpio(407)
- 02-01 21:14:54.275 0 0 I sec_bat_check_callback: Battery status(1)
- 02-01 21:14:54.275 0 0 I sec-battery battery.94: sec_bat_battery_cable_check: Battery Connected
- 02-01 21:14:54.276 0 0 I max77803_get_health_state: reg_data(0x3)
- 02-01 21:14:54.277 0 0 I max77803_get_health_state: vbus_state : 0x3, chg_dtls : 0x1
- 02-01 21:14:54.277 0 0 I sec-battery battery.94: sec_bat_time_management: Charging Time : 155 secs
- 02-01 21:14:54.277 0 0 I sec-battery battery.94: sec_bat_temperature: HLT(2000) HLR(2000) HT(600), HR(400), LT(-50), LR(0)
- 02-01 21:14:54.277 0 0 I sec-battery battery.94: sec_bat_fullcharged_check: Charging Mode : Normal
- 02-01 21:14:54.277 0 0 I sec-battery battery.94: sec_bat_monitor_work: Status(Charging), Mode(Normal), Health(Good), Cable(4), Vendor(SDI SDI), level(100%)
- 02-01 21:14:54.278 0 0 I sec-battery battery.94: sec_pogo_get_property: pogo charger is online (0)
- 02-01 21:14:54.279 0 0 I sec_chg_get_property: reg_data(93)
- 02-01 21:14:54.279 0 0 W healthd : sec-charger: Unknown power supply type
- 01-01 00:17:01.343 879 879 F libc : page record for 0xb6f3d02c was not found (block_size=16)
- 01-01 00:17:01.344 881 881 F libc : page record for 0xb6f5802c was not found (block_size=16)
- 02-01 21:14:54.289 0 0 I init : Starting service 'ril-daemon'...
- 02-01 21:14:54.290 0 0 I init : Starting service 'keystore'...
- 02-01 21:14:54.290 0 0 E init : Warning! Service qcamerasvr needs a SELinux domain defined; please fix!
- 02-01 21:14:54.290 0 0 I init : Starting service 'qcamerasvr'...
- 02-01 21:14:54.291 0 0 E init : Warning! Service adsprpcd needs a SELinux domain defined; please fix!
- 02-01 21:14:54.291 0 0 I init : Starting service 'adsprpcd'...
- 02-01 21:14:54.296 0 0 I init : Service 'ril-daemon' (pid 879) exited with status 1
- 02-01 21:14:54.296 0 0 I init : Service 'ril-daemon' (pid 879) killing any children in process group
- 02-01 21:14:54.297 0 0 I init : Service 'qcamerasvr' (pid 881) exited with status 1
- 02-01 21:14:54.297 0 0 I init : Service 'qcamerasvr' (pid 881) killing any children in process group
- 01-01 00:17:01.350 882 882 E adsprpc : vendor/qcom/proprietary/adsprpc/src/fastrpc_apps_user.c:126:/dev/adsprpc-smd device initialization error: Operation not permitted
- 01-01 00:17:01.350 882 882 E adsprpc : vendor/qcom/proprietary/adsprpc/src/fastrpc_apps_user.c:179::error: -1: dev != -1
- 01-01 00:17:01.350 882 882 E adsprpc : vendor/qcom/proprietary/adsprpc/src/fastrpc_apps_user.c:224::error: -1: 0 == (nErr = remotectl_open(name, (int*)ph, dlerrstr, sizeof(dlerrstr), &dlerr))
- 01-01 00:17:01.350 882 882 E adsprpc : vendor/qcom/proprietary/adsprpc/src/fastrpc_apps_user.c:126:/dev/adsprpc-smd device initialization error: No such file or directory
- 01-01 00:17:01.350 882 882 E adsprpc : vendor/qcom/proprietary/adsprpc/src/fastrpc_apps_user.c:179::error: -1: dev != -1
- 01-01 00:17:01.350 882 882 E adsprpc : vendor/qcom/proprietary/adsprpc/src/adsprpcd.c:23::error: -1: 0 == adsp_default_listener_register()
- 01-01 00:17:01.350 882 882 E adsprpc : vendor/qcom/proprietary/adsprpc/src/adsprpcd.c:36:adsprpcd exiting nErr=-1
- 02-01 21:14:54.303 0 0 I init : Service 'adsprpcd' (pid 882) exited with status 255
- 02-01 21:14:54.303 0 0 I init : Service 'adsprpcd' (pid 882) killing any children in process group
- 01-01 00:17:01.364 880 880 I keystore: Found keymaster0 module Keymaster QCOM HAL, version 3
- 01-01 00:17:01.364 880 880 I SoftKeymaster: system/keymaster/soft_keymaster_device.cpp, Line 122: Creating device
- 01-01 00:17:01.364 880 880 D SoftKeymaster: system/keymaster/soft_keymaster_device.cpp, Line 123: Device address: 0xb6ba4000
- 01-01 00:17:01.364 880 880 D QSEECOMAPI: : QSEECom_get_handle sb_length = 0x2000
- 01-01 00:17:01.365 880 880 D QSEECOMAPI: : App is not loaded in QSEE
- 02-01 21:14:54.319 0 0 I init : Service 'keystore' (pid 880) exited with status 1
- 01-01 00:17:01.365 880 880 E QSEECOMAPI: : Error::Cannot open the file /vendor/firmware/keymaster/keymaster.mdt
- 02-01 21:14:54.319 0 0 I init : Service 'keystore' (pid 880) killing any children in process group
- 01-01 00:17:01.365 880 880 E QSEECOMAPI: : Error::Loading image failed with ret = -1
- 01-01 00:17:01.365 880 880 E QCOMKeyMaster: Loading keymaster app failed
- 01-01 00:17:01.365 880 880 E keystore: Error opening keystore keymaster0 device.
- 01-01 00:17:01.365 880 880 E keystore: keystore keymaster could not be initialized; exiting
- 01-01 00:17:01.921 384 418 E use-Rlog/RLOG-RIL-QMI: qmi_client [384]: unable to connect to server, errno=[2:No such file or directory], attempt=32
- 01-01 00:17:02.922 384 418 E use-Rlog/RLOG-RIL-QMI: qmi_client [384]: unable to connect to server, errno=[2:No such file or directory], attempt=33
- 01-01 00:17:03.922 384 418 E use-Rlog/RLOG-RIL-QMI: qmi_client [384]: unable to connect to server, errno=[2:No such file or directory], attempt=34
- 01-01 00:17:04.922 384 418 E use-Rlog/RLOG-RIL-QMI: qmi_client [384]: unable to connect to server, errno=[2:No such file or directory], attempt=35
- 02-01 21:14:58.019 0 0 I msm_thermal: msm_therm_temp_log Debug Temp for Sensor:
- 01-01 00:17:05.922 384 418 E use-Rlog/RLOG-RIL-QMI: qmi_client [384]: unable to connect to server, errno=[2:No such file or directory], attempt=36
- 01-01 00:17:06.378 883 883 F libc : page record for 0xb6f8602c was not found (block_size=16)
- 02-01 21:14:59.324 0 0 I msm_thermal: msm_therm_temp_log (0 --- 49)(1 --- 49)(2 --- 48)(3 --- 50)(4 --- 50)(5 --- 50)(6 --- 51)(7 --- 50)(8 --- 50)(9 --- 49)(10 --- 48)
- 02-01 21:14:59.324 0 0 I init : Starting service 'ril-daemon'...
- 02-01 21:14:59.325 0 0 I init : Starting service 'keystore'...
- 02-01 21:14:59.325 0 0 E init : Warning! Service qcamerasvr needs a SELinux domain defined; please fix!
- 02-01 21:14:59.325 0 0 I init : Starting service 'qcamerasvr'...
- 02-01 21:14:59.326 0 0 E init : Warning! Service adsprpcd needs a SELinux domain defined; please fix!
- 02-01 21:14:59.326 0 0 I init : Starting service 'adsprpcd'...
- 02-01 21:14:59.331 0 0 I init : Service 'ril-daemon' (pid 883) exited with status 1
- 02-01 21:14:59.331 0 0 I init : Service 'ril-daemon' (pid 883) killing any children in process group
- 01-01 00:17:06.379 885 885 F libc : page record for 0xb6f1902c was not found (block_size=16)
- 01-01 00:17:06.384 886 886 E adsprpc : vendor/qcom/proprietary/adsprpc/src/fastrpc_apps_user.c:126:/dev/adsprpc-smd device initialization error: Operation not permitted
- 01-01 00:17:06.384 886 886 E adsprpc : vendor/qcom/proprietary/adsprpc/src/fastrpc_apps_user.c:179::error: -1: dev != -1
- 01-01 00:17:06.384 886 886 E adsprpc : vendor/qcom/proprietary/adsprpc/src/fastrpc_apps_user.c:224::error: -1: 0 == (nErr = remotectl_open(name, (int*)ph, dlerrstr, sizeof(dlerrstr), &dlerr))
- 01-01 00:17:06.384 886 886 E adsprpc : vendor/qcom/proprietary/adsprpc/src/fastrpc_apps_user.c:126:/dev/adsprpc-smd device initialization error: No such file or directory
- 01-01 00:17:06.384 886 886 E adsprpc : vendor/qcom/proprietary/adsprpc/src/fastrpc_apps_user.c:179::error: -1: dev != -1
- 01-01 00:17:06.384 886 886 E adsprpc : vendor/qcom/proprietary/adsprpc/src/adsprpcd.c:23::error: -1: 0 == adsp_default_listener_register()
- 01-01 00:17:06.384 886 886 E adsprpc : vendor/qcom/proprietary/adsprpc/src/adsprpcd.c:36:adsprpcd exiting nErr=-1
- 02-01 21:14:59.332 0 0 I init : Service 'qcamerasvr' (pid 885) exited with status 1
- 02-01 21:14:59.332 0 0 I init : Service 'qcamerasvr' (pid 885) killing any children in process group
- 02-01 21:14:59.338 0 0 I init : Service 'adsprpcd' (pid 886) exited with status 255
- 02-01 21:14:59.338 0 0 I init : Service 'adsprpcd' (pid 886) killing any children in process group
- 01-01 00:17:06.399 884 884 I keystore: Found keymaster0 module Keymaster QCOM HAL, version 3
- 01-01 00:17:06.399 884 884 I SoftKeymaster: system/keymaster/soft_keymaster_device.cpp, Line 122: Creating device
- 01-01 00:17:06.399 884 884 D SoftKeymaster: system/keymaster/soft_keymaster_device.cpp, Line 123: Device address: 0xb6ba4000
- 01-01 00:17:06.399 884 884 D QSEECOMAPI: : QSEECom_get_handle sb_length = 0x2000
- 01-01 00:17:06.399 884 884 D QSEECOMAPI: : App is not loaded in QSEE
- 01-01 00:17:06.399 884 884 E QSEECOMAPI: : Error::Cannot open the file /vendor/firmware/keymaster/keymaster.mdt
- 01-01 00:17:06.399 884 884 E QSEECOMAPI: : Error::Loading image failed with ret = -1
- 01-01 00:17:06.400 884 884 E QCOMKeyMaster: Loading keymaster app failed
- 01-01 00:17:06.400 884 884 E keystore: Error opening keystore keymaster0 device.
- 01-01 00:17:06.400 884 884 E keystore: keystore keymaster could not be initialized; exiting
- 02-01 21:14:59.354 0 0 I init : Service 'keystore' (pid 884) exited with status 1
- 02-01 21:14:59.354 0 0 I init : Service 'keystore' (pid 884) killing any children in process group
- 01-01 00:17:06.922 384 418 E use-Rlog/RLOG-RIL-QMI: qmi_client [384]: unable to connect to server, errno=[2:No such file or directory], attempt=37
- 01-01 00:17:07.922 384 418 E use-Rlog/RLOG-RIL-QMI: qmi_client [384]: unable to connect to server, errno=[2:No such file or directory], attempt=38
- 02-01 21:15:01.639 0 0 I [SSP] : debug_work_func(1) - Sensor state: 0x3ffff, RC: 0, MS: 0 Santi: 0 Dump: 0
- 02-01 21:15:01.647 0 0 I : [SSP] Sensor Posision A : 6, G : 6, M: 3
- 01-01 00:17:08.922 384 418 E use-Rlog/RLOG-RIL-QMI: qmi_client [384]: unable to connect to server, errno=[2:No such file or directory], attempt=39
- 01-01 00:17:09.922 384 418 E use-Rlog/RLOG-RIL-QMI: qmi_client [384]: unable to connect to server, errno=[2:No such file or directory], attempt=40
- 02-01 21:15:03.029 0 0 I msm_thermal: msm_therm_temp_log Debug Temp for Sensor:
- 01-01 00:17:10.923 384 418 E use-Rlog/RLOG-RIL-QMI: qmi_client [384]: unable to connect to server, errno=[2:No such file or directory], attempt=41
- 02-01 21:15:04.315 0 0 I msm_thermal: msm_therm_temp_log (0 --- 49)(1 --- 49)(2 --- 48)(3 --- 50)(4 --- 50)(5 --- 50)(6 --- 51)(7 --- 50)(8 --- 50)(9 --- 49)(10 --- 48)
- 02-01 21:15:04.315 0 0 I max77803_get_input_current: CHG_CNFG_09(0x12)
- 02-01 21:15:04.315 0 0 I max77803_get_input_current: CHG_CNFG_09(0x12)
- 02-01 21:15:04.317 0 0 I sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (4361), data(0x0000)
- 02-01 21:15:04.343 0 0 I sec-battery battery.94: sec_bat_get_temperature_by_adc: Temp(352), Temp-ADC(31777)
- 02-01 21:15:04.344 0 0 I sec-battery battery.94: sec_bat_get_temperature_by_adc: Temp(292), Temp-ADC(33000)
- 02-01 21:15:04.345 0 0 I sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (4361), data(0x0000)
- 02-01 21:15:04.345 0 0 I sec-fuelgauge 19-0036: sec_fg_get_scaled_capacity: scaled capacity (45.3)
- 02-01 21:15:04.345 0 0 I sec-battery battery.94: sec_bat_get_battery_info:Vnow(3821mV),Inow(450mA),Imax(460mA),SOC(45%),Tbat(352),is_hc_usb(0)
- 02-01 21:15:04.345 0 0 I sec_bat_check_callback: battery->pdata->bat_irq_gpio(407)
- 02-01 21:15:04.345 0 0 I sec_bat_check_callback: Battery status(1)
- 02-01 21:15:04.345 0 0 I sec-battery battery.94: sec_bat_battery_cable_check: Battery Connected
- 02-01 21:15:04.346 0 0 I max77803_get_health_state: reg_data(0x3)
- 02-01 21:15:04.347 0 0 I max77803_get_health_state: vbus_state : 0x3, chg_dtls : 0x1
- 02-01 21:15:04.347 0 0 I sec-battery battery.94: sec_bat_monitor_work: Status(Charging), Mode(Normal), Health(Good), Cable(4), Vendor(SDI SDI), level(100%)
- 02-01 21:15:04.348 0 0 I sec-battery battery.94: sec_pogo_get_property: pogo charger is online (0)
- 02-01 21:15:04.349 0 0 I sec_chg_get_property: reg_data(93)
- 02-01 21:15:04.349 0 0 W healthd : sec-charger: Unknown power supply type
- 01-01 00:17:11.413 887 887 F libc : page record for 0xb6ecf02c was not found (block_size=16)
- 01-01 00:17:11.414 889 889 F libc : page record for 0xb6ed202c was not found (block_size=16)
- 02-01 21:15:04.359 0 0 I init : Starting service 'ril-daemon'...
- 02-01 21:15:04.360 0 0 I init : Starting service 'keystore'...
- 02-01 21:15:04.360 0 0 E init : Warning! Service qcamerasvr needs a SELinux domain defined; please fix!
- 02-01 21:15:04.360 0 0 I init : Starting service 'qcamerasvr'...
- 02-01 21:15:04.361 0 0 E init : Warning! Service adsprpcd needs a SELinux domain defined; please fix!
- 02-01 21:15:04.361 0 0 I init : Starting service 'adsprpcd'...
- 02-01 21:15:04.366 0 0 I init : Service 'ril-daemon' (pid 887) exited with status 1
- 02-01 21:15:04.366 0 0 I init : Service 'ril-daemon' (pid 887) killing any children in process group
- 02-01 21:15:04.367 0 0 I init : Service 'qcamerasvr' (pid 889) exited with status 1
- 02-01 21:15:04.367 0 0 I init : Service 'qcamerasvr' (pid 889) killing any children in process group
- 01-01 00:17:11.419 890 890 E adsprpc : vendor/qcom/proprietary/adsprpc/src/fastrpc_apps_user.c:126:/dev/adsprpc-smd device initialization error: Operation not permitted
- 01-01 00:17:11.419 890 890 E adsprpc : vendor/qcom/proprietary/adsprpc/src/fastrpc_apps_user.c:179::error: -1: dev != -1
- 01-01 00:17:11.419 890 890 E adsprpc : vendor/qcom/proprietary/adsprpc/src/fastrpc_apps_user.c:224::error: -1: 0 == (nErr = remotectl_open(name, (int*)ph, dlerrstr, sizeof(dlerrstr), &dlerr))
- 01-01 00:17:11.419 890 890 E adsprpc : vendor/qcom/proprietary/adsprpc/src/fastrpc_apps_user.c:126:/dev/adsprpc-smd device initialization error: No such file or directory
- 01-01 00:17:11.419 890 890 E adsprpc : vendor/qcom/proprietary/adsprpc/src/fastrpc_apps_user.c:179::error: -1: dev != -1
- 01-01 00:17:11.419 890 890 E adsprpc : vendor/qcom/proprietary/adsprpc/src/adsprpcd.c:23::error: -1: 0 == adsp_default_listener_register()
- 01-01 00:17:11.419 890 890 E adsprpc : vendor/qcom/proprietary/adsprpc/src/adsprpcd.c:36:adsprpcd exiting nErr=-1
- 02-01 21:15:04.373 0 0 I init : Service 'adsprpcd' (pid 890) exited with status 255
- 02-01 21:15:04.373 0 0 I init : Service 'adsprpcd' (pid 890) killing any children in process group
- 01-01 00:17:11.434 888 888 I keystore: Found keymaster0 module Keymaster QCOM HAL, version 3
- 01-01 00:17:11.434 888 888 I SoftKeymaster: system/keymaster/soft_keymaster_device.cpp, Line 122: Creating device
- 01-01 00:17:11.434 888 888 D SoftKeymaster: system/keymaster/soft_keymaster_device.cpp, Line 123: Device address: 0xb6b64000
- 01-01 00:17:11.434 888 888 D QSEECOMAPI: : QSEECom_get_handle sb_length = 0x2000
- 01-01 00:17:11.434 888 888 D QSEECOMAPI: : App is not loaded in QSEE
- 01-01 00:17:11.434 888 888 E QSEECOMAPI: : Error::Cannot open the file /vendor/firmware/keymaster/keymaster.mdt
- 01-01 00:17:11.434 888 888 E QSEECOMAPI: : Error::Loading image failed with ret = -1
- 01-01 00:17:11.434 888 888 E QCOMKeyMaster: Loading keymaster app failed
- 02-01 21:15:04.388 0 0 I init : Service 'keystore' (pid 888) exited with status 1
- 01-01 00:17:11.434 888 888 E keystore: Error opening keystore keymaster0 device.
- 02-01 21:15:04.388 0 0 I init : Service 'keystore' (pid 888) killing any children in process group
- 01-01 00:17:11.434 888 888 E keystore: keystore keymaster could not be initialized; exiting
- 01-01 00:17:11.923 384 418 E use-Rlog/RLOG-RIL-QMI: qmi_client [384]: unable to connect to server, errno=[2:No such file or directory], attempt=42
- 01-01 00:17:12.923 384 418 E use-Rlog/RLOG-RIL-QMI: qmi_client [384]: unable to connect to server, errno=[2:No such file or directory], attempt=43
- 01-01 00:17:13.266 397 397 E use-Rlog/RLOG-RIL-QMI: linux_qmi_qmux_io.c: Unable to open port id /dev/smdcntl0, error [2:No such file or directory]
- 01-01 00:17:13.266 397 397 E use-Rlog/RLOG-RIL-RAWDATA: qmi_qmux_open_connection: QMI_QMUX_IO_PLATFORM_OPEN_CONN failed -1
- 01-01 00:17:13.266 397 397 E use-Rlog/RLOG-RIL-QMI: qmuxd: opening connection for RMNET0 [DATA5_CNTL] failed on attempt 4, Waiting 500 milliseconds before retry
- 01-01 00:17:13.766 397 397 E use-Rlog/RLOG-RIL-QMI: linux_qmi_qmux_if_configure_port_timeout: mode=0, smd_timeout=20, hsic_timeout=60
- 01-01 00:17:13.766 397 397 E use-Rlog/RLOG-RIL-QMI: linux_qmi_qmux_if_configure_port_timeout: failed to open HSIC timeout config=/sys/devices/virtual/hsicctl/hsicctl0/modem_wait errno [2:No such file or directory]
- 02-01 21:15:06.721 0 0 E pil-q6v5-mss fc880000.qcom,mss: mba: Failed to locate mba.mdt
- 02-01 21:15:06.721 0 0 E modem_notifier_cb: sysmon_send_event error -19
- 02-01 21:15:06.721 0 0 E M-Notify: General: 5
- 02-01 21:15:06.721 0 0 E : smd_pkt_open failed on smd_pkt_dev id:0 - subsystem_get failed for modem
- 01-01 00:17:13.923 384 418 E use-Rlog/RLOG-RIL-QMI: qmi_client [384]: unable to connect to server, errno=[2:No such file or directory], attempt=44
- 01-01 00:17:14.923 384 418 E use-Rlog/RLOG-RIL-QMI: qmi_client [384]: unable to connect to server, errno=[2:No such file or directory], attempt=45
- 02-01 21:15:08.039 0 0 I msm_thermal: msm_therm_temp_log Debug Temp for Sensor:
- 01-01 00:17:15.923 384 418 E use-Rlog/RLOG-RIL-QMI: qmi_client [384]: unable to connect to server, errno=[2:No such file or directory], attempt=46
- 02-01 21:15:09.394 0 0 I msm_thermal: msm_therm_temp_log (0 --- 49)(1 --- 49)(2 --- 48)(3 --- 50)(4 --- 50)(5 --- 50)(6 --- 51)(7 --- 50)(8 --- 50)(9 --- 49)(10 --- 48)
- 02-01 21:15:09.394 0 0 I init : Starting service 'ril-daemon'...
- 02-01 21:15:09.394 0 0 I init : Starting service 'keystore'...
- 02-01 21:15:09.395 0 0 E init : Warning! Service qcamerasvr needs a SELinux domain defined; please fix!
- 02-01 21:15:09.395 0 0 I init : Starting service 'qcamerasvr'...
- 02-01 21:15:09.395 0 0 E init : Warning! Service adsprpcd needs a SELinux domain defined; please fix!
- 02-01 21:15:09.395 0 0 I init : Starting service 'adsprpcd'...
- 01-01 00:17:16.448 892 892 F libc : page record for 0xb6f7a02c was not found (block_size=16)
- 01-01 00:17:16.448 894 894 F libc : page record for 0xb6f2102c was not found (block_size=16)
- 01-01 00:17:16.454 895 895 E adsprpc : vendor/qcom/proprietary/adsprpc/src/fastrpc_apps_user.c:126:/dev/adsprpc-smd device initialization error: Operation not permitted
- 01-01 00:17:16.455 895 895 E adsprpc : vendor/qcom/proprietary/adsprpc/src/fastrpc_apps_user.c:179::error: -1: dev != -1
- 01-01 00:17:16.455 895 895 E adsprpc : vendor/qcom/proprietary/adsprpc/src/fastrpc_apps_user.c:224::error: -1: 0 == (nErr = remotectl_open(name, (int*)ph, dlerrstr, sizeof(dlerrstr), &dlerr))
- 01-01 00:17:16.455 895 895 E adsprpc : vendor/qcom/proprietary/adsprpc/src/fastrpc_apps_user.c:126:/dev/adsprpc-smd device initialization error: No such file or directory
- 01-01 00:17:16.455 895 895 E adsprpc : vendor/qcom/proprietary/adsprpc/src/fastrpc_apps_user.c:179::error: -1: dev != -1
- 01-01 00:17:16.455 895 895 E adsprpc : vendor/qcom/proprietary/adsprpc/src/adsprpcd.c:23::error: -1: 0 == adsp_default_listener_register()
- 01-01 00:17:16.455 895 895 E adsprpc : vendor/qcom/proprietary/adsprpc/src/adsprpcd.c:36:adsprpcd exiting nErr=-1
- 02-01 21:15:09.401 0 0 I init : Service 'ril-daemon' (pid 892) exited with status 1
- 02-01 21:15:09.401 0 0 I init : Service 'ril-daemon' (pid 892) killing any children in process group
- 02-01 21:15:09.402 0 0 I init : Service 'qcamerasvr' (pid 894) exited with status 1
- 02-01 21:15:09.402 0 0 I init : Service 'qcamerasvr' (pid 894) killing any children in process group
- 02-01 21:15:09.408 0 0 I init : Service 'adsprpcd' (pid 895) exited with status 255
- 02-01 21:15:09.408 0 0 I init : Service 'adsprpcd' (pid 895) killing any children in process group
- 01-01 00:17:16.469 893 893 I keystore: Found keymaster0 module Keymaster QCOM HAL, version 3
- 01-01 00:17:16.469 893 893 I SoftKeymaster: system/keymaster/soft_keymaster_device.cpp, Line 122: Creating device
- 01-01 00:17:16.469 893 893 D SoftKeymaster: system/keymaster/soft_keymaster_device.cpp, Line 123: Device address: 0xb6b64000
- 01-01 00:17:16.469 893 893 D QSEECOMAPI: : QSEECom_get_handle sb_length = 0x2000
- 01-01 00:17:16.469 893 893 D QSEECOMAPI: : App is not loaded in QSEE
- 01-01 00:17:16.469 893 893 E QSEECOMAPI: : Error::Cannot open the file /vendor/firmware/keymaster/keymaster.mdt
- 01-01 00:17:16.469 893 893 E QSEECOMAPI: : Error::Loading image failed with ret = -1
- 01-01 00:17:16.469 893 893 E QCOMKeyMaster: Loading keymaster app failed
- 01-01 00:17:16.469 893 893 E keystore: Error opening keystore keymaster0 device.
- 01-01 00:17:16.469 893 893 E keystore: keystore keymaster could not be initialized; exiting
- 02-01 21:15:09.423 0 0 I init : Service 'keystore' (pid 893) exited with status 1
- 02-01 21:15:09.423 0 0 I init : Service 'keystore' (pid 893) killing any children in process group
- 01-01 00:17:16.923 384 418 E use-Rlog/RLOG-RIL-QMI: qmi_client [384]: unable to connect to server, errno=[2:No such file or directory], attempt=47
- 01-01 00:17:17.923 384 418 E use-Rlog/RLOG-RIL-QMI: qmi_client [384]: unable to connect to server, errno=[2:No such file or directory], attempt=48
- 01-01 00:17:18.924 384 418 E use-Rlog/RLOG-RIL-QMI: qmi_client [384]: unable to connect to server, errno=[2:No such file or directory], attempt=49
- 02-01 21:15:12.639 0 0 I [SSP] : debug_work_func(1) - Sensor state: 0x3ffff, RC: 0, MS: 0 Santi: 0 Dump: 0
- 02-01 21:15:12.647 0 0 I : [SSP] Sensor Posision A : 6, G : 6, M: 3
- 01-01 00:17:19.924 384 418 E use-Rlog/RLOG-RIL-QMI: qmi_client [384]: unable to connect to server, errno=[2:No such file or directory], attempt=50
- 02-01 21:15:13.049 0 0 I msm_thermal: msm_therm_temp_log Debug Temp for Sensor:
- 01-01 00:17:20.924 384 418 E use-Rlog/RLOG-RIL-QMI: qmi_client [384]: unable to connect to server, errno=[2:No such file or directory], attempt=51
- 02-01 21:15:14.385 0 0 I msm_thermal: msm_therm_temp_log (0 --- 49)(1 --- 49)(2 --- 48)(3 --- 50)(4 --- 50)(5 --- 50)(6 --- 51)(7 --- 50)(8 --- 50)(9 --- 49)(10 --- 48)
- 02-01 21:15:14.385 0 0 I max77803_get_input_current: CHG_CNFG_09(0x12)
- 02-01 21:15:14.385 0 0 I max77803_get_input_current: CHG_CNFG_09(0x12)
- 02-01 21:15:14.387 0 0 I sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (4361), data(0x0000)
- 02-01 21:15:14.413 0 0 I sec-battery battery.94: sec_bat_get_temperature_by_adc: Temp(352), Temp-ADC(31777)
- 02-01 21:15:14.414 0 0 I sec-battery battery.94: sec_bat_get_temperature_by_adc: Temp(292), Temp-ADC(33000)
- 02-01 21:15:14.415 0 0 I sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (4361), data(0x0000)
- 02-01 21:15:14.415 0 0 I sec-fuelgauge 19-0036: sec_fg_get_scaled_capacity: scaled capacity (45.3)
- 02-01 21:15:14.415 0 0 I sec-battery battery.94: sec_bat_get_battery_info:Vnow(3821mV),Inow(450mA),Imax(460mA),SOC(45%),Tbat(352),is_hc_usb(0)
- 02-01 21:15:14.415 0 0 I sec_bat_check_callback: battery->pdata->bat_irq_gpio(407)
- 02-01 21:15:14.415 0 0 I sec_bat_check_callback: Battery status(1)
- 02-01 21:15:14.415 0 0 I sec-battery battery.94: sec_bat_battery_cable_check: Battery Connected
- 02-01 21:15:14.416 0 0 I max77803_get_health_state: reg_data(0x3)
- 02-01 21:15:14.417 0 0 I max77803_get_health_state: vbus_state : 0x3, chg_dtls : 0x1
- 02-01 21:15:14.417 0 0 I sec-battery battery.94: sec_bat_monitor_work: Status(Charging), Mode(Normal), Health(Good), Cable(4), Vendor(SDI SDI), level(100%)
- 02-01 21:15:14.418 0 0 I sec-battery battery.94: sec_pogo_get_property: pogo charger is online (0)
- 02-01 21:15:14.419 0 0 I sec_chg_get_property: reg_data(93)
- 02-01 21:15:14.419 0 0 W healthd : sec-charger: Unknown power supply type
- 02-01 21:15:14.429 0 0 I init : Starting service 'ril-daemon'...
- 01-01 00:17:21.482 896 896 F libc : page record for 0xb6ed902c was not found (block_size=16)
- 01-01 00:17:21.483 898 898 F libc : page record for 0xb6f1102c was not found (block_size=16)
- 02-01 21:15:14.429 0 0 I init : Starting service 'keystore'...
- 02-01 21:15:14.430 0 0 E init : Warning! Service qcamerasvr needs a SELinux domain defined; please fix!
- 02-01 21:15:14.430 0 0 I init : Starting service 'qcamerasvr'...
- 02-01 21:15:14.430 0 0 E init : Warning! Service adsprpcd needs a SELinux domain defined; please fix!
- 02-01 21:15:14.430 0 0 I init : Starting service 'adsprpcd'...
- 02-01 21:15:14.436 0 0 I init : Service 'ril-daemon' (pid 896) exited with status 1
- 02-01 21:15:14.436 0 0 I init : Service 'ril-daemon' (pid 896) killing any children in process group
- 02-01 21:15:14.437 0 0 I init : Service 'qcamerasvr' (pid 898) exited with status 1
- 02-01 21:15:14.437 0 0 I init : Service 'qcamerasvr' (pid 898) killing any children in process group
- 01-01 00:17:21.489 899 899 E adsprpc : vendor/qcom/proprietary/adsprpc/src/fastrpc_apps_user.c:126:/dev/adsprpc-smd device initialization error: Operation not permitted
- 01-01 00:17:21.489 899 899 E adsprpc : vendor/qcom/proprietary/adsprpc/src/fastrpc_apps_user.c:179::error: -1: dev != -1
- 01-01 00:17:21.489 899 899 E adsprpc : vendor/qcom/proprietary/adsprpc/src/fastrpc_apps_user.c:224::error: -1: 0 == (nErr = remotectl_open(name, (int*)ph, dlerrstr, sizeof(dlerrstr), &dlerr))
- 01-01 00:17:21.489 899 899 E adsprpc : vendor/qcom/proprietary/adsprpc/src/fastrpc_apps_user.c:126:/dev/adsprpc-smd device initialization error: No such file or directory
- 01-01 00:17:21.489 899 899 E adsprpc : vendor/qcom/proprietary/adsprpc/src/fastrpc_apps_user.c:179::error: -1: dev != -1
- 01-01 00:17:21.489 899 899 E adsprpc : vendor/qcom/proprietary/adsprpc/src/adsprpcd.c:23::error: -1: 0 == adsp_default_listener_register()
- 01-01 00:17:21.489 899 899 E adsprpc : vendor/qcom/proprietary/adsprpc/src/adsprpcd.c:36:adsprpcd exiting nErr=-1
- 02-01 21:15:14.443 0 0 I init : Service 'adsprpcd' (pid 899) exited with status 255
- 02-01 21:15:14.443 0 0 I init : Service 'adsprpcd' (pid 899) killing any children in process group
- 01-01 00:17:21.504 897 897 I keystore: Found keymaster0 module Keymaster QCOM HAL, version 3
- 01-01 00:17:21.504 897 897 I SoftKeymaster: system/keymaster/soft_keymaster_device.cpp, Line 122: Creating device
- 01-01 00:17:21.504 897 897 D SoftKeymaster: system/keymaster/soft_keymaster_device.cpp, Line 123: Device address: 0xb6b24000
- 01-01 00:17:21.504 897 897 D QSEECOMAPI: : QSEECom_get_handle sb_length = 0x2000
- 01-01 00:17:21.504 897 897 D QSEECOMAPI: : App is not loaded in QSEE
- 01-01 00:17:21.504 897 897 E QSEECOMAPI: : Error::Cannot open the file /vendor/firmware/keymaster/keymaster.mdt
- 01-01 00:17:21.504 897 897 E QSEECOMAPI: : Error::Loading image failed with ret = -1
- 01-01 00:17:21.504 897 897 E QCOMKeyMaster: Loading keymaster app failed
- 01-01 00:17:21.504 897 897 E keystore: Error opening keystore keymaster0 device.
- 01-01 00:17:21.504 897 897 E keystore: keystore keymaster could not be initialized; exiting
- 02-01 21:15:14.458 0 0 I init : Service 'keystore' (pid 897) exited with status 1
- 02-01 21:15:14.458 0 0 I init : Service 'keystore' (pid 897) killing any children in process group
- 01-01 00:17:21.924 384 418 E use-Rlog/RLOG-RIL-QMI: qmi_client [384]: unable to connect to server, errno=[2:No such file or directory], attempt=52
- 01-01 00:17:22.924 384 418 E use-Rlog/RLOG-RIL-QMI: qmi_client [384]: unable to connect to server, errno=[2:No such file or directory], attempt=53
- 01-01 00:17:23.924 384 418 E use-Rlog/RLOG-RIL-QMI: qmi_client [384]: unable to connect to server, errno=[2:No such file or directory], attempt=54
- 01-01 00:17:24.924 384 418 E use-Rlog/RLOG-RIL-QMI: qmi_client [384]: unable to connect to server, errno=[2:No such file or directory], attempt=55
- 02-01 21:15:17.907 0 0 I qpnp_pon_input_dispatch: PWR key is pressed
- 02-01 21:15:17.907 0 0 E : sec_debug_check_crash_key code 116 value 1 state 0 enable 0
- 02-01 21:15:17.907 0 0 F : (sec_debug_set_upload_cause) type = 0x85
- 02-01 21:15:18.059 0 0 I msm_thermal: msm_therm_temp_log Debug Temp for Sensor:
- 01-01 00:17:25.924 384 418 E use-Rlog/RLOG-RIL-QMI: qmi_client [384]: unable to connect to server, errno=[2:No such file or directory], attempt=56
- 02-01 21:15:19.464 0 0 I msm_thermal: msm_therm_temp_log (0 --- 49)(1 --- 49)(2 --- 48)(3 --- 50)(4 --- 50)(5 --- 50)(6 --- 51)(7 --- 50)(8 --- 50)(9 --- 49)(10 --- 48)
- 02-01 21:15:19.464 0 0 I init : Starting service 'ril-daemon'...
- 02-01 21:15:19.464 0 0 I init : Starting service 'keystore'...
- 02-01 21:15:19.465 0 0 E init : Warning! Service qcamerasvr needs a SELinux domain defined; please fix!
- 02-01 21:15:19.465 0 0 I init : Starting service 'qcamerasvr'...
- 02-01 21:15:19.465 0 0 E init : Warning! Service adsprpcd needs a SELinux domain defined; please fix!
- 02-01 21:15:19.465 0 0 I init : Starting service 'adsprpcd'...
- 01-01 00:17:26.517 900 900 F libc : page record for 0xb6f3d02c was not found (block_size=16)
- 01-01 00:17:26.518 902 902 F libc : page record for 0xb6f2202c was not found (block_size=16)
- 01-01 00:17:26.525 903 903 E adsprpc : vendor/qcom/proprietary/adsprpc/src/fastrpc_apps_user.c:126:/dev/adsprpc-smd device initialization error: Operation not permitted
- 01-01 00:17:26.525 903 903 E adsprpc : vendor/qcom/proprietary/adsprpc/src/fastrpc_apps_user.c:179::error: -1: dev != -1
- 01-01 00:17:26.525 903 903 E adsprpc : vendor/qcom/proprietary/adsprpc/src/fastrpc_apps_user.c:224::error: -1: 0 == (nErr = remotectl_open(name, (int*)ph, dlerrstr, sizeof(dlerrstr), &dlerr))
- 01-01 00:17:26.525 903 903 E adsprpc : vendor/qcom/proprietary/adsprpc/src/fastrpc_apps_user.c:126:/dev/adsprpc-smd device initialization error: No such file or directory
- 01-01 00:17:26.525 903 903 E adsprpc : vendor/qcom/proprietary/adsprpc/src/fastrpc_apps_user.c:179::error: -1: dev != -1
- 01-01 00:17:26.525 903 903 E adsprpc : vendor/qcom/proprietary/adsprpc/src/adsprpcd.c:23::error: -1: 0 == adsp_default_listener_register()
- 01-01 00:17:26.525 903 903 E adsprpc : vendor/qcom/proprietary/adsprpc/src/adsprpcd.c:36:adsprpcd exiting nErr=-1
- 02-01 21:15:19.471 0 0 I init : Service 'ril-daemon' (pid 900) exited with status 1
- 02-01 21:15:19.471 0 0 I init : Service 'ril-daemon' (pid 900) killing any children in process group
- 02-01 21:15:19.472 0 0 I init : Service 'qcamerasvr' (pid 902) exited with status 1
- 02-01 21:15:19.472 0 0 I init : Service 'qcamerasvr' (pid 902) killing any children in process group
- 02-01 21:15:19.473 0 0 E : reading MSM_THERM_CH [rc = 0] [adc_code = 30102]
- 02-01 21:15:19.479 0 0 I init : Service 'adsprpcd' (pid 903) exited with status 255
- 02-01 21:15:19.479 0 0 I init : Service 'adsprpcd' (pid 903) killing any children in process group
- 01-01 00:17:26.539 901 901 I keystore: Found keymaster0 module Keymaster QCOM HAL, version 3
- 01-01 00:17:26.539 901 901 I SoftKeymaster: system/keymaster/soft_keymaster_device.cpp, Line 122: Creating device
- 01-01 00:17:26.539 901 901 D SoftKeymaster: system/keymaster/soft_keymaster_device.cpp, Line 123: Device address: 0xb6b64000
- 01-01 00:17:26.539 901 901 D QSEECOMAPI: : QSEECom_get_handle sb_length = 0x2000
- 01-01 00:17:26.539 901 901 D QSEECOMAPI: : App is not loaded in QSEE
- 01-01 00:17:26.539 901
Add Comment
Please, Sign In to add comment