API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Apr 28th, 2020
52
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 26.81 KB | None | 0 0
raw download clone embed print report
  1. U-Boot 2020.04 (Apr 28 2020 - 07:35:40 +0000) for ODROID-XU4
  2.  
  3. CPU: Exynos5422 @ 800 MHz
  4. DRAM: 2 GiB
  5. MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 2
  6. In: serial
  7. Out: serial
  8. Err: serial
  9. Model: Odroid XU3/XU4/HC1/HC2 based on Exynos5422
  10. Type: xu4
  11. In: serial
  12. Out: serial
  13. Err: serial
  14. Boot device: MMC(2)
  15. Net: No ethernet found.
  16. Hit any key to stop autoboot: 0
  17. switch to partitions #0, OK
  18. mmc2 is current device
  19. Scanning mmc 2:1...
  20. Found /extlinux/extlinux.conf
  21. Retrieving file: /extlinux/extlinux.conf
  22. 200 bytes read in 20 ms (9.8 KiB/s)
  23. 1: LibreELEC
  24. Retrieving file: /KERNEL
  25. 11966528 bytes read in 741 ms (15.4 MiB/s)
  26. append: boot=LABEL=LIBREELEC disk=LABEL=STORAGE earlyprintk textmode systemd.debug_shell=ttySAC2 console=ttySAC2,115200n8 console=tty0
  27. Retrieving file: /exynos5422-odroidxu4.dtb
  28. 64665 bytes read in 23 ms (2.7 MiB/s)
  29. Kernel image @ 0x42000000 [ 0x000000 - 0xb69840 ]
  30. ## Flattened Device Tree blob at 43000000
  31. Booting using the fdt blob at 0x43000000
  32. Loading Device Tree to 4ffed000, end 4ffffc98 ... OK
  33.  
  34. Starting kernel ...
  35.  
  36. [ 0.000000] Booting Linux on physical CPU 0x100
  37. [ 0.000000] Linux version 5.7.0-rc3 (chewitt@toolbox) (gcc version 9.3.0 (GCC), GNU ld (GNU Binutils) 2.34) #1 SMP PREEMPT Tue Apr 28 07:30:33 UTC 2020
  38. [ 0.000000] CPU: ARMv7 Processor [410fc073] revision 3 (ARMv7), cr=30c5387d
  39. [ 0.000000] CPU: div instructions available: patching division code
  40. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  41. [ 0.000000] OF: fdt: Machine model: Hardkernel Odroid XU4
  42. [ 0.000000] Memory policy: Data cache writealloc
  43. [ 0.000000] cma: Reserved 128 MiB at 0x00000000b6800000
  44. [ 0.000000] Samsung CPU ID: 0xe5422001
  45. [ 0.000000] Running under secure firmware.
  46. [ 0.000000] percpu: Embedded 20 pages/cpu s52300 r8192 d21428 u81920
  47. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 516352
  48. [ 0.000000] Kernel command line: boot=LABEL=LIBREELEC disk=LABEL=STORAGE earlyprintk textmode systemd.debug_shell=ttySAC2 console=ttySAC2,115200n8 console=tty0 s5p_mfc.mem=16M
  49. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
  50. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
  51. [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
  52. [ 0.000000] software IO TLB: mapped [mem 0x6a6a2000-0x6e6a2000] (64MB)
  53. [ 0.000000] Memory: 1827516K/2074624K available (12288K kernel code, 1188K rwdata, 3416K rodata, 6144K init, 343K bss, 116036K reserved, 131072K cma-reserved, 1157120K highmem)
  54. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
  55. [ 0.000000] rcu: Preemptible hierarchical RCU implementation.
  56. [ 0.000000] Tasks RCU enabled.
  57. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
  58. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
  59. [ 0.000000] GIC: Using split EOI/Deactivate mode
  60. [ 0.000000] random: get_random_bytes called from start_kernel+0x330/0x4ec with crng_init=0
  61. [ 0.000000] Switching to timer-based delay loop, resolution 41ns
  62. [ 0.000000] clocksource: mct-frc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
  63. [ 0.000007] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns
  64. [ 0.000033] genirq: irq_chip COMBINER did not update eff. affinity mask of irq 49
  65. [ 0.001071] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
  66. [ 0.001092] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
  67. [ 0.001112] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
  68. [ 0.001125] Ignoring duplicate/late registration of read_current_timer delay
  69. [ 0.001549] Console: colour dummy device 80x30
  70. [ 0.002222] printk: console [tty0] enabled
  71. [ 0.002276] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
  72. [ 0.002319] pid_max: default: 32768 minimum: 301
  73. [ 0.002554] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
  74. [ 0.002602] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
  75. [ 0.003733] CPU: Testing write buffer coherency: ok
  76. [ 0.004310] CPU0: thread -1, cpu 0, socket 1, mpidr 80000100
  77. [ 0.005239] Setting up static identity map for 0x40200000 - 0x40200060
  78. [ 0.005564] ARM CCI driver probed
  79. [ 0.005812] Exynos MCPM support installed
  80. [ 0.006126] rcu: Hierarchical SRCU implementation.
  81. [ 0.008736] soc soc0: Exynos: CPU[EXYNOS5800] PRO_ID[0xe5422001] REV[0x1] Detected
  82. [ 0.009291] smp: Bringing up secondary CPUs ...
  83. [ 0.010306] CPU1: thread -1, cpu 1, socket 1, mpidr 80000101
  84. [ 0.011432] CPU2: thread -1, cpu 2, socket 1, mpidr 80000102
  85. [ 0.012594] CPU3: thread -1, cpu 3, socket 1, mpidr 80000103
  86. [ 0.013680] CPU4: thread -1, cpu 0, socket 0, mpidr 80000000
  87. [ 0.013691] CPU4: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable
  88. [ 0.014913] CPU5: thread -1, cpu 1, socket 0, mpidr 80000001
  89. [ 0.014922] CPU5: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable
  90. [ 0.016084] CPU6: thread -1, cpu 2, socket 0, mpidr 80000002
  91. [ 0.016092] CPU6: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable
  92. [ 0.017251] CPU7: thread -1, cpu 3, socket 0, mpidr 80000003
  93. [ 0.017260] CPU7: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable
  94. [ 0.017484] smp: Brought up 1 node, 8 CPUs
  95. [ 0.017534] SMP: Total of 8 processors activated (384.00 BogoMIPS).
  96. [ 0.017558] CPU: All CPU(s) started in HYP mode.
  97. [ 0.017578] CPU: Virtualization extensions available.
  98. [ 0.018736] devtmpfs: initialized
  99. [ 0.035857] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0
  100. [ 0.036359] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  101. [ 0.036397] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
  102. [ 0.039243] xor: measuring software checksum speed
  103. [ 0.075952] arm4regs : 1513.000 MB/sec
  104. [ 0.115954] 8regs : 1235.000 MB/sec
  105. [ 0.155955] 32regs : 1227.000 MB/sec
  106. [ 0.195957] neon : 2204.000 MB/sec
  107. [ 0.195977] xor: using function: neon (2204.000 MB/sec)
  108. [ 0.196047] pinctrl core: initialized pinctrl subsystem
  109. [ 0.198027] thermal_sys: Registered thermal governor 'step_wise'
  110. [ 0.200990] NET: Registered protocol family 16
  111. [ 0.202926] DMA: preallocated 256 KiB pool for atomic coherent allocations
  112. [ 0.205089] cpuidle: using governor menu
  113. [ 0.205567] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
  114. [ 0.205597] hw-breakpoint: maximum watchpoint size is 8 bytes.
  115. [ 0.268298] EXYNOS5420 PMU initialized
  116. [ 0.268601] random: fast init done
  117. [ 0.407989] raid6: neonx8 gen() 1888 MB/s
  118. [ 0.475965] raid6: neonx8 xor() 1094 MB/s
  119. [ 0.543970] raid6: neonx4 gen() 2003 MB/s
  120. [ 0.611987] raid6: neonx4 xor() 1300 MB/s
  121. [ 0.679968] raid6: neonx2 gen() 1924 MB/s
  122. [ 0.747973] raid6: neonx2 xor() 1406 MB/s
  123. [ 0.815965] raid6: neonx1 gen() 1472 MB/s
  124. [ 0.883999] raid6: neonx1 xor() 1222 MB/s
  125. [ 0.951970] raid6: int32x8 gen() 494 MB/s
  126. [ 1.019983] raid6: int32x8 xor() 268 MB/s
  127. [ 1.088019] raid6: int32x4 gen() 489 MB/s
  128. [ 1.156010] raid6: int32x4 xor() 276 MB/s
  129. [ 1.224022] raid6: int32x2 gen() 467 MB/s
  130. [ 1.292008] raid6: int32x2 xor() 249 MB/s
  131. [ 1.359983] raid6: int32x1 gen() 430 MB/s
  132. [ 1.428030] raid6: int32x1 xor() 194 MB/s
  133. [ 1.428049] raid6: using algorithm neonx4 gen() 2003 MB/s
  134. [ 1.428067] raid6: .... xor() 1300 MB/s, rmw enabled
  135. [ 1.428086] raid6: using neon recovery algorithm
  136. [ 1.429502] iommu: Default domain type: Translated
  137. [ 1.429979] SCSI subsystem initialized
  138. [ 1.430187] usbcore: registered new interface driver usbfs
  139. [ 1.430252] usbcore: registered new interface driver hub
  140. [ 1.430407] usbcore: registered new device driver usb
  141. [ 1.431090] s3c-i2c 12c80000.i2c: slave address 0x00
  142. [ 1.431119] s3c-i2c 12c80000.i2c: bus frequency set to 65 KHz
  143. [ 1.431400] s3c-i2c 12c80000.i2c: i2c-2: S3C I2C adapter
  144. [ 1.431872] mc: Linux media interface: v0.10
  145. [ 1.431921] videodev: Linux video capture interface: v2.00
  146. [ 1.432046] pps_core: LinuxPPS API ver. 1 registered
  147. [ 1.432066] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  148. [ 1.432531] Advanced Linux Sound Architecture Driver Initialized.
  149. [ 1.433563] clocksource: Switched to clocksource mct-frc
  150. [ 2.394125] VFS: Disk quotas dquot_6.6.0
  151. [ 2.394212] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  152. [ 2.405840] NET: Registered protocol family 2
  153. [ 2.406556] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
  154. [ 2.406609] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
  155. [ 2.406703] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
  156. [ 2.406871] TCP: Hash tables configured (established 8192 bind 8192)
  157. [ 2.406994] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
  158. [ 2.407050] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
  159. [ 2.407291] NET: Registered protocol family 1
  160. [ 2.408038] RPC: Registered named UNIX socket transport module.
  161. [ 2.408064] RPC: Registered udp transport module.
  162. [ 2.408083] RPC: Registered tcp transport module.
  163. [ 2.408101] RPC: Registered tcp NFSv4.1 backchannel transport module.
  164. [ 2.426177] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
  165. [ 2.427017] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available
  166. [ 2.431060] Initialise system trusted keyrings
  167. [ 2.431309] workingset: timestamp_bits=14 max_order=19 bucket_order=5
  168. [ 2.440077] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  169. [ 2.441027] NFS: Registering the id_resolver key type
  170. [ 2.441066] Key type id_resolver registered
  171. [ 2.441085] Key type id_legacy registered
  172. [ 2.441113] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  173. [ 2.441140] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
  174. [ 2.442143] romfs: ROMFS MTD (C) 2007 Red Hat, Inc.
  175. [ 2.442431] SGI XFS with ACLs, security attributes, realtime, quota, no debug enabled
  176. [ 2.475788] Key type asymmetric registered
  177. [ 2.475811] Asymmetric key parser 'x509' registered
  178. [ 2.475884] bounce: pool size: 64 pages
  179. [ 2.475931] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
  180. [ 2.476207] io scheduler mq-deadline registered
  181. [ 2.476233] io scheduler kyber registered
  182. [ 2.476485] io scheduler bfq registered
  183. [ 2.478776] samsung-usb2-phy 12130000.phy: supply vbus not found, using dummy regulator
  184. [ 2.479690] exynos5_usb3drd_phy 12100000.phy: supply vbus not found, using dummy regulator
  185. [ 2.479795] exynos5_usb3drd_phy 12100000.phy: supply vbus-boost not found, using dummy regulator
  186. [ 2.480187] exynos5_usb3drd_phy 12500000.phy: supply vbus not found, using dummy regulator
  187. [ 2.480303] exynos5_usb3drd_phy 12500000.phy: supply vbus-boost not found, using dummy regulator
  188. [ 2.488675] dma-pl330 121a0000.pdma: Loaded driver for PL330 DMAC-241330
  189. [ 2.488707] dma-pl330 121a0000.pdma: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
  190. [ 2.491412] dma-pl330 121b0000.pdma: Loaded driver for PL330 DMAC-241330
  191. [ 2.491441] dma-pl330 121b0000.pdma: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
  192. [ 2.492339] dma-pl330 10800000.mdma: Loaded driver for PL330 DMAC-241330
  193. [ 2.492369] dma-pl330 10800000.mdma: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32
  194. [ 2.570486] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
  195. [ 2.572750] samsung-uart 12c00000.serial: IRQ index 1 not found
  196. [ 2.572834] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 62, base_baud = 0) is a S3C6400/10
  197. [ 2.573252] samsung-uart 12c10000.serial: IRQ index 1 not found
  198. [ 2.573314] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 63, base_baud = 0) is a S3C6400/10
  199. [ 2.573754] samsung-uart 12c20000.serial: IRQ index 1 not found
  200. [ 2.573816] 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 64, base_baud = 0) is a S3C6400/10
  201. [ 3.572025] printk: console [ttySAC2] enabled
  202. [ 3.576719] samsung-uart 12c30000.serial: IRQ index 1 not found
  203. [ 3.582284] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 65, base_baud = 0) is a S3C6400/10
  204. [ 3.592722] exynos-trng 10830600.rng: Exynos True Random Number Generator.
  205. [ 3.599650] exynos-mixer 14450000.mixer: Adding to iommu group 0
  206. [ 3.607816] exynos-rotator 11c00000.rotator: Adding to iommu group 1
  207. [ 3.613668] exynos-scaler 12800000.scaler: Adding to iommu group 2
  208. [ 3.620225] exynos-scaler 12810000.scaler: Adding to iommu group 3
  209. [ 3.626334] exynos-scaler 12820000.scaler: Adding to iommu group 4
  210. [ 3.650851] brd: module loaded
  211. [ 3.667081] loop: module loaded
  212. [ 3.670103] libphy: Fixed MDIO Bus: probed
  213. [ 3.673162] usbcore: registered new interface driver r8152
  214. [ 3.678371] usbcore: registered new interface driver cdc_ether
  215. [ 3.684166] usbcore: registered new interface driver cdc_subset
  216. [ 3.692317] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  217. [ 3.697431] ehci-exynos: EHCI Exynos driver
  218. [ 3.701937] exynos-ehci 12110000.usb: EHCI Host Controller
  219. [ 3.707047] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 1
  220. [ 3.714899] exynos-ehci 12110000.usb: irq 82, io mem 0x12110000
  221. [ 3.733616] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00
  222. [ 3.738454] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.07
  223. [ 3.746426] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  224. [ 3.753610] usb usb1: Product: EHCI Host Controller
  225. [ 3.758460] usb usb1: Manufacturer: Linux 5.7.0-rc3 ehci_hcd
  226. [ 3.764092] usb usb1: SerialNumber: 12110000.usb
  227. [ 3.769318] hub 1-0:1.0: USB hub found
  228. [ 3.772457] hub 1-0:1.0: 3 ports detected
  229. [ 3.777373] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  230. [ 3.782565] ohci-exynos: OHCI Exynos driver
  231. [ 3.786913] exynos-ohci 12120000.usb: USB Host Controller
  232. [ 3.792104] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 2
  233. [ 3.799821] exynos-ohci 12120000.usb: irq 82, io mem 0x12120000
  234. [ 3.869863] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.07
  235. [ 3.876700] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  236. [ 3.884576] usb usb2: Product: USB Host Controller
  237. [ 3.888652] usb usb2: Manufacturer: Linux 5.7.0-rc3 ohci_hcd
  238. [ 3.894282] usb usb2: SerialNumber: 12120000.usb
  239. [ 3.899441] hub 2-0:1.0: USB hub found
  240. [ 3.902642] hub 2-0:1.0: 3 ports detected
  241. [ 3.908812] mousedev: PS/2 mouse device common for all mice
  242. [ 3.914309] i2c /dev entries driver
  243. [ 3.949630] vddq_mmc2: Bringing 3300000uV into 2800000-2800000uV
  244. [ 3.970298] vdd_sd: Bringing 3300000uV into 2800000-2800000uV
  245. [ 4.051189] s5m-rtc s2mps14-rtc: registered as rtc0
  246. [ 4.056496] s5m-rtc s2mps14-rtc: setting system clock to 2000-01-01T00:00:07 UTC (946684807)
  247. [ 4.064049] s2mps11-clk s2mps11-clk: DMA mask not set
  248. [ 4.071664] s5p-jpeg 11f50000.jpeg: Adding to iommu group 5
  249. [ 4.076193] s5p-jpeg 11f50000.jpeg: encoder device registered as /dev/video0
  250. [ 4.083003] s5p-jpeg 11f50000.jpeg: decoder device registered as /dev/video1
  251. [ 4.089839] s5p-jpeg 11f50000.jpeg: Samsung S5P JPEG codec
  252. [ 4.095514] s5p-jpeg 11f60000.jpeg: Adding to iommu group 6
  253. [ 4.101191] s5p-jpeg 11f60000.jpeg: encoder device registered as /dev/video2
  254. [ 4.108044] s5p-jpeg 11f60000.jpeg: decoder device registered as /dev/video3
  255. [ 4.114882] s5p-jpeg 11f60000.jpeg: Samsung S5P JPEG codec
  256. [ 4.121080] s5p-mfc 11000000.codec: Adding to iommu group 7
  257. [ 4.144229] s5p-mfc 11000000.codec: preallocated 16 MiB buffer for the firmware and context buffers
  258. [ 4.152432] s5p-mfc 11000000.codec: decoder registered as /dev/video4
  259. [ 4.158446] s5p-mfc 11000000.codec: encoder registered as /dev/video5
  260. [ 4.167268] exynos-gsc 13e00000.video-scaler: Adding to iommu group 8
  261. [ 4.173611] exynos-gsc 13e10000.video-scaler: Adding to iommu group 9
  262. [ 4.184469] exynos-tmu 10060000.tmu: More trip points than supported by this TMU.
  263. [ 4.190531] exynos-tmu 10060000.tmu: 2 trip points should be configured in polling mode.
  264. [ 4.199535] exynos-tmu 10064000.tmu: More trip points than supported by this TMU.
  265. [ 4.206039] exynos-tmu 10064000.tmu: 2 trip points should be configured in polling mode.
  266. [ 4.215054] exynos-tmu 10068000.tmu: More trip points than supported by this TMU.
  267. [ 4.221575] exynos-tmu 10068000.tmu: 2 trip points should be configured in polling mode.
  268. [ 4.230570] exynos-tmu 1006c000.tmu: More trip points than supported by this TMU.
  269. [ 4.237060] exynos-tmu 1006c000.tmu: 2 trip points should be configured in polling mode.
  270. [ 4.246100] exynos-tmu 100a0000.tmu: More trip points than supported by this TMU.
  271. [ 4.252572] exynos-tmu 100a0000.tmu: 6 trip points should be configured in polling mode.
  272. [ 4.261606] s3c2410-wdt 101d0000.watchdog: watchdog inactive, reset disabled, irq disabled
  273. [ 4.269492] device-mapper: uevent: version 1.0.3
  274. [ 4.273836] device-mapper: ioctl: 4.42.0-ioctl (2020-02-27) initialised: dm-devel@redhat.com
  275. [ 4.303897] sdhci: Secure Digital Host Controller Interface driver
  276. [ 4.308614] sdhci: Copyright(c) Pierre Ossman
  277. [ 4.313130] Synopsys Designware Multimedia Card Interface Driver
  278. [ 4.319511] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address mode.
  279. [ 4.325834] dwmmc_exynos 12200000.mmc: Using internal DMA controller.
  280. [ 4.332187] dwmmc_exynos 12200000.mmc: Version ID is 250a
  281. [ 4.337589] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 84,64 bit host data width,64 deep fifo
  282. [ 4.347058] dwmmc_exynos 12200000.mmc: allocated mmc-pwrseq
  283. [ 4.368974] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63)
  284. [ 4.389950] dwmmc_exynos 12220000.mmc: IDMAC supports 32-bit address mode.
  285. [ 4.395415] dwmmc_exynos 12220000.mmc: Using internal DMA controller.
  286. [ 4.401822] dwmmc_exynos 12220000.mmc: Version ID is 250a
  287. [ 4.407180] dwmmc_exynos 12220000.mmc: DW MMC controller at irq 85,64 bit host data width,64 deep fifo
  288. [ 4.431949] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63)
  289. [ 4.454913] s5p-secss 10830000.sss: s5p-sss driver registered
  290. [ 4.459469] hid: raw HID events driver (C) Jiri Kosina
  291. [ 4.473865] exynos-nocp: new NoC Probe device registered: 10ca1000.nocp
  292. [ 4.479165] exynos-nocp: new NoC Probe device registered: 10ca1400.nocp
  293. [ 4.485761] exynos-nocp: new NoC Probe device registered: 10ca1800.nocp
  294. [ 4.492333] exynos-nocp: new NoC Probe device registered: 10ca1c00.nocp
  295. [ 4.499113] exynos-ppmu: new PPMU device registered 10d00000.ppmu (ppmu-event3-dmc0_0)
  296. [ 4.507203] exynos-ppmu: new PPMU device registered 10d10000.ppmu (ppmu-event3-dmc0_1)
  297. [ 4.514715] exynos-ppmu: new PPMU device registered 10d60000.ppmu (ppmu-event3-dmc1_0)
  298. [ 4.522601] exynos-ppmu: new PPMU device registered 10d70000.ppmu (ppmu-event3-dmc1_1)
  299. [ 4.530926] exynos-adc 12d10000.adc: IRQ index 1 not found
  300. [ 4.542450] NET: Registered protocol family 17
  301. [ 4.545421] NET: Registered protocol family 15
  302. [ 4.549884] Key type dns_resolver registered
  303. [ 4.554486] Registering SWP/SWPB emulation handler
  304. [ 4.559032] registered taskstats version 1
  305. [ 4.562954] Loading compiled-in X.509 certificates
  306. [ 4.567835] Key type ._fscrypt registered
  307. [ 4.571699] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)
  308. [ 4.571725] Key type .fscrypt registered
  309. [ 4.585288] Key type fscrypt-provisioning registered
  310. [ 4.590748] Btrfs loaded, crc32c=crc32c-generic
  311. [ 4.595524] Key type encrypted registered
  312. [ 4.633475] exynos-asv 10000000.chipid: cpu0 opp0, freq: 1500 missing
  313. [ 4.638495] exynos-asv 10000000.chipid: cpu4 opp0, freq: 2100 missing
  314. [ 4.647057] OF: graph: no port node found in /soc/hdmi@14530000
  315. [ 4.652340] [drm] Exynos DRM: using 14450000.mixer device for DMA mapping operations
  316. [ 4.659298] exynos-drm exynos-drm: bound 14450000.mixer (ops 0xc0e8efa0)
  317. [ 4.665916] exynos-drm exynos-drm: bound 14530000.hdmi (ops 0xc0e8f620)
  318. [ 4.672492] exynos-rotator 11c00000.rotator: The exynos rotator has been probed successfully
  319. [ 4.680891] exynos-drm exynos-drm: bound 11c00000.rotator (ops 0xc0e90318)
  320. [ 4.687745] exynos-scaler 12800000.scaler: The exynos scaler has been probed successfully
  321. [ 4.695882] exynos-drm exynos-drm: bound 12800000.scaler (ops 0xc0e90c10)
  322. [ 4.702649] exynos-scaler 12810000.scaler: The exynos scaler has been probed successfully
  323. [ 4.710786] exynos-drm exynos-drm: bound 12810000.scaler (ops 0xc0e90c10)
  324. [ 4.717572] exynos-scaler 12820000.scaler: The exynos scaler has been probed successfully
  325. [ 4.725692] exynos-drm exynos-drm: bound 12820000.scaler (ops 0xc0e90c10)
  326. [ 4.732444] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
  327. [ 4.739056] exynos-drm exynos-drm: [drm] Cannot find any crtc or sizes
  328. [ 4.745983] exynos-drm exynos-drm: [drm] Cannot find any crtc or sizes
  329. [ 4.752150] [drm] Initialized exynos 1.1.0 20180330 for exynos-drm on minor 0
  330. [ 4.760945] xhci-hcd xhci-hcd.8.auto: xHCI Host Controller
  331. [ 4.764982] xhci-hcd xhci-hcd.8.auto: new USB bus registered, assigned bus number 3
  332. [ 4.772794] xhci-hcd xhci-hcd.8.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000000002010010
  333. [ 4.782036] xhci-hcd xhci-hcd.8.auto: irq 162, io mem 0x12000000
  334. [ 4.788205] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.07
  335. [ 4.796170] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  336. [ 4.799332] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 300000Hz, actual 297619HZ div = 84)
  337. [ 4.803359] usb usb3: Product: xHCI Host Controller
  338. [ 4.803363] usb usb3: Manufacturer: Linux 5.7.0-rc3 xhci-hcd
  339. [ 4.823288] usb usb3: SerialNumber: xhci-hcd.8.auto
  340. [ 4.828476] hub 3-0:1.0: USB hub found
  341. [ 4.831887] hub 3-0:1.0: 1 port detected
  342. [ 4.835972] xhci-hcd xhci-hcd.8.auto: xHCI Host Controller
  343. [ 4.841228] xhci-hcd xhci-hcd.8.auto: new USB bus registered, assigned bus number 4
  344. [ 4.848851] xhci-hcd xhci-hcd.8.auto: Host supports USB 3.0 SuperSpeed
  345. [ 4.849644] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 200000Hz, actual 200000HZ div = 125)
  346. [ 4.855464] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
  347. [ 4.873021] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.07
  348. [ 4.881168] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  349. [ 4.888360] usb usb4: Product: xHCI Host Controller
  350. [ 4.893217] usb usb4: Manufacturer: Linux 5.7.0-rc3 xhci-hcd
  351. [ 4.898847] usb usb4: SerialNumber: xhci-hcd.8.auto
  352. [ 4.901762] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 100000Hz, actual 100000HZ div = 250)
  353. [ 4.904401] hub 4-0:1.0: USB hub found
  354. [ 4.916972] hub 4-0:1.0: 1 port detected
  355. [ 4.922850] xhci-hcd xhci-hcd.9.auto: xHCI Host Controller
  356. [ 4.926891] xhci-hcd xhci-hcd.9.auto: new USB bus registered, assigned bus number 5
  357. [ 4.934692] xhci-hcd xhci-hcd.9.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000000002010010
  358. [ 4.943940] xhci-hcd xhci-hcd.9.auto: irq 163, io mem 0x12400000
  359. [ 4.950099] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.07
  360. [ 4.958067] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  361. [ 4.958965] mmc1: new ultra high speed DDR50 SDXC card at address 59b4
  362. [ 4.965263] usb usb5: Product: xHCI Host Controller
  363. [ 4.965266] usb usb5: Manufacturer: Linux 5.7.0-rc3 xhci-hcd
  364. [ 4.972622] mmcblk1: mmc1:59b4 59.7 GiB
  365. [ 4.976626] usb usb5: SerialNumber: xhci-hcd.9.auto
  366. [ 4.984210] mmcblk1: p1 p2
  367. [ 4.987421] hub 5-0:1.0: USB hub found
  368. [ 4.998030] hub 5-0:1.0: 1 port detected
  369. [ 5.002129] xhci-hcd xhci-hcd.9.auto: xHCI Host Controller
  370. [ 5.007382] xhci-hcd xhci-hcd.9.auto: new USB bus registered, assigned bus number 6
  371. [ 5.015006] xhci-hcd xhci-hcd.9.auto: Host supports USB 3.0 SuperSpeed
  372. [ 5.021541] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
  373. [ 5.029649] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.07
  374. [ 5.037792] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  375. [ 5.044985] usb usb6: Product: xHCI Host Controller
  376. [ 5.049835] usb usb6: Manufacturer: Linux 5.7.0-rc3 xhci-hcd
  377. [ 5.055464] usb usb6: SerialNumber: xhci-hcd.9.auto
  378. [ 5.060628] hub 6-0:1.0: USB hub found
  379. [ 5.064065] hub 6-0:1.0: 1 port detected
  380. [ 5.068903] s3c-rtc 101e0000.rtc: rtc disabled, re-enabling
  381. [ 5.073716] s3c-rtc 101e0000.rtc: registered as rtc1
  382. [ 5.079997] exynos-bus: new bus device registered: soc:bus_wcore ( 88700 KHz ~ 532000 KHz)
  383. [ 5.087297] exynos-bus: new bus device registered: soc:bus_noc ( 66600 KHz ~ 111000 KHz)
  384. [ 5.095228] exynos-bus: new bus device registered: soc:bus_fsys_apb (111000 KHz ~ 222000 KHz)
  385. [ 5.103826] exynos-bus: new bus device registered: soc:bus_fsys ( 75000 KHz ~ 200000 KHz)
  386. [ 5.111927] exynos-bus: new bus device registered: soc:bus_fsys2 ( 75000 KHz ~ 200000 KHz)
  387. [ 5.120261] exynos-bus: new bus device registered: soc:bus_mfc ( 83250 KHz ~ 333000 KHz)
  388. [ 5.128258] exynos-bus: new bus device registered: soc:bus_gen ( 88700 KHz ~ 266000 KHz)
  389. [ 5.136177] exynos-bus: new bus device registered: soc:bus_peri ( 66600 KHz ~ 66600 KHz)
  390. [ 5.144527] exynos-bus: new bus device registered: soc:bus_g2d ( 83250 KHz ~ 333000 KHz)
  391. [ 5.152530] exynos-bus: new bus device registered: soc:bus_g2d_acp ( 66500 KHz ~ 266000 KHz)
  392. [ 5.160928] exynos-bus: new bus device registered: soc:bus_jpeg ( 75000 KHz ~ 300000 KHz)
  393. [ 5.169082] exynos-bus: new bus device registered: soc:bus_jpeg_apb ( 83250 KHz ~ 166500 KHz)
  394. [ 5.177466] exynos-bus: new bus device registered: soc:bus_disp1_fimd (120000 KHz ~ 200000 KHz)
  395. [ 5.186227] exynos-bus: new bus device registered: soc:bus_disp1 (120000 KHz ~ 300000 KHz)
  396. [ 5.194427] exynos-bus: new bus device registered: soc:bus_gscl_scaler (150000 KHz ~ 300000 KHz)
  397. [ 5.203276] exynos-bus: new bus device registered: soc:bus_mscl ( 84000 KHz ~ 666000 KHz)
  398. [ 5.249253] ALSA device list:
  399. [ 5.250776] No soundcards found.
  400. [ 5.256773] Freeing unused kernel memory: 6144K
  401. [ 5.260098] Run /init as init process
  402. [ 5.289935] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63)
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!