Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- <6>[ 0.000000] Booting Linux on physical CPU 0
- <6>[ 0.000000] Initializing cgroup subsys cpu
- <5>[ 0.000000] Linux version 3.4.0-perf-g1e74d58-dirty (rbox@build) (gcc version 4.7 (GCC) ) #1 SMP PREEMPT Fri Sep 26 20:37:25 MST 2014
- <4>[ 0.000000] CPU: ARMv7 Processor [511f06f0] revision 0 (ARMv7), cr=10c5387d
- <4>[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
- <4>[ 0.000000] Machine: LAB126 BUELLER
- <2>[ 0.000000] Truncating memory at 0xc0000000 to fit in 32-bit physical address space
- <6>[ 0.000000] cma: CMA: reserved 8 MiB at af800000
- <6>[ 0.000000] cma: CMA: reserved 120 MiB at a0000000
- <6>[ 0.000000] memory pool 3 (start ff2ff000 size d00000) initialized
- <6>[ 0.000000] cma: CMA: reserved 16 MiB at ae800000
- <4>[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
- <3>[ 0.000000] smem_find(137, 80): wrong size 72
- <6>[ 0.000000] socinfo_init: v6, id=109, ver=2.0, raw_id=1822, raw_ver=1822, hw_plat=22, hw_plat_ver=65536
- <6>[ 0.000000] accessory_chip=0 hw_plat_subtype=0
- <7>[ 0.000000] On node 0 totalpages: 514559
- <7>[ 0.000000] Normal zone: 1524 pages used for memmap
- <7>[ 0.000000] Normal zone: 0 pages reserved
- <7>[ 0.000000] Normal zone: 187660 pages, LIFO batch:31
- <7>[ 0.000000] HighMem zone: 2568 pages used for memmap
- <7>[ 0.000000] HighMem zone: 322807 pages, LIFO batch:31
- <6>[ 0.000000] allocating 25100288 bytes at c24a8000 (826a8000 physical) for fb
- <6>[ 0.000000] PERCPU: Embedded 9 pages/cpu @c3c9b000 s15936 r8192 d12736 u36864
- <7>[ 0.000000] pcpu-alloc: s15936 r8192 d12736 u36864 alloc=9*4096
- <7>[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
- <4>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 510467
- <6>[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
- <6>[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
- <6>[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
- <6>[ 0.000000] Memory: 140MB 74MB 274MB 120MB 1401MB = 2009MB total
- <5>[ 0.000000] Memory: 1849380k/1865764k available, 208856k reserved, 1297404K highmem
- <5>[ 0.000000] Virtual kernel memory layout:
- <5>[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- <5>[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
- <5>[ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
- <5>[ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
- <5>[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
- <5>[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
- <5>[ 0.000000] .text : 0xc0008000 - 0xc0c6ba10 (12687 kB)
- <5>[ 0.000000] .init : 0xc0d00000 - 0xc0e1ce40 (1140 kB)
- <5>[ 0.000000] .data : 0xc0e1e000 - 0xc0f5fca0 (1288 kB)
- <5>[ 0.000000] .bss : 0xc0f5fcc4 - 0xc10e6d8c (1565 kB)
- <6>[ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
- <6>[ 0.000000] Preemptible hierarchical RCU implementation.
- <6>[ 0.000000] NR_IRQS:1177
- <6>[ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
- <6>[ 0.000000] Console: colour dummy device 80x30
- <6>[ 0.000000] console [tty0] enabled
- <6>[ 0.150207] Calibrating delay using timer specific routine.. 13.53 BogoMIPS (lpj=67668)
- <6>[ 0.150238] pid_max: default: 32768 minimum: 301
- <6>[ 0.150634] Mount-cache hash table entries: 512
- <6>[ 0.151916] Initializing cgroup subsys debug
- <6>[ 0.151947] Initializing cgroup subsys cpuacct
- <6>[ 0.151947] Initializing cgroup subsys freezer
- <6>[ 0.152008] CPU: Testing write buffer coherency: ok
- <6>[ 0.152252] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
- <6>[ 0.152282] hw perfevents: enabled with ARMv7 Krait PMU driver, 5 counters available
- <6>[ 0.152374] Setting up static identity map for 0x80a6ba68 - 0x80a6baf0
- <6>[ 0.154815] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
- <6>[ 0.154907] Brought up 2 CPUs
- <6>[ 0.154968] SMP: Total of 2 processors activated (27.06 BogoMIPS).
- <6>[ 0.168823] dummy:
- <6>[ 0.177703] NET: Registered protocol family 16
- <6>[ 0.181060] DMA: preallocated 1792 KiB pool for atomic coherent allocations
- <3>[ 0.181243] AXI: msm_bus_fabric_init_driver(): msm_bus_fabric_init_driver
- <6>[ 0.183013] meminfo_init: smem ram ptable found: ver: 0 len: 6
- <6>[ 0.183044] Found 2 memory banks grouped into 16 memory regions
- <6>[ 0.183258] gpiochip_add: registered GPIOs 0 to 151 on device: msmgpio
- <3>[ 0.183807] smem_find(137, 80): wrong size 72
- <6>[ 0.183837] socinfo_init: v6, id=109, ver=2.0, raw_id=1822, raw_ver=1822, hw_plat=22, hw_plat_ver=65536
- <6>[ 0.183868] accessory_chip=0 hw_plat_subtype=0
- <6>[ 0.183898] msm_rpm_init: RPM firmware 3.0.16842955
- <3>[ 0.203369] msm_rpm_get_status(): Status id 433 not defined for target
- <3>[ 0.203369] msm_rpm_get_status(): Status id 433 not defined for target
- <3>[ 0.203399] msm_rpm_get_status(): Status id 433 not defined for target
- <3>[ 0.203430] msm_rpm_get_status(): Status id 433 not defined for target
- <3>[ 0.203460] msm_rpm_get_status(): Status id 433 not defined for target
- <3>[ 0.203491] msm_rpm_get_status(): Status id 433 not defined for target
- <3>[ 0.203491] msm_rpm_get_status(): Status id 433 not defined for target
- <3>[ 0.203521] msm_rpm_get_status(): Status id 433 not defined for target
- <3>[ 0.218200] adding pm8921_mpq_hrd_common_devices
- <6>[ 0.218536] gpio_vreg_probe: id=202, name=ext_5v, gpio=202, gpio_label=ext_5v_en
- <6>[ 0.218841] gpio_vreg_probe: id=203, name=ext_mpp8, gpio=203, gpio_label=ext_mpp8_en
- <6>[ 0.219146] pm8921_probe: PMIC revision 1: F4
- <6>[ 0.219177] pm8921_probe: PMIC revision 2: 06
- <6>[ 0.219207] pm8921_probe: PMIC version: PM8921 rev 3.0
- <6>[ 0.219207] pm8921_probe: PMIC Restart Reason: Triggered from KPD (power key press)
- <6>[ 0.220275] gpiochip_add: registered GPIOs 152 to 195 on device: pm-gpio
- <6>[ 0.220825] pm_gpio_probe: OK: base=152, ngpio=44
- <6>[ 0.221038] gpiochip_add: registered GPIOs 196 to 207 on device: pm8xxx-mpp
- <6>[ 0.221130] pm8xxx_mpp_probe: OK: base=196, ngpio=12
- <6>[ 0.223663] pm8821_probe: PMIC revision 1: PM8821 rev F3
- <6>[ 0.223693] pm8821_probe: PMIC revision 2: PM8821 rev 0B
- <6>[ 0.223693] pm8821_probe: PMIC version: PM8821 ver 2.1
- <6>[ 0.224243] gpiochip_add: registered GPIOs 208 to 211 on device: pm8xxx-mpp
- <6>[ 0.224304] pm8xxx_mpp_probe: OK: base=208, ngpio=4
- <6>[ 0.225494] saw_probe: id=0, name=8921_s5
- <6>[ 0.225830] saw_probe: id=1, name=8921_s6
- <6>[ 0.226135] saw_probe: id=2, name=8821_s0
- <6>[ 0.226501] saw_probe: id=3, name=8821_s1
- <3>[ 0.232299] Could not get MPP7 regulator
- <6>[ 0.233551] enable_spdif_buffer: done
- <6>[ 0.234466] gpio_vreg_probe: id=193, name=vbus_otg, gpio=193, gpio_label=usb_otg_sw_en
- <3>[ 0.236450] gpio_bt_sys_reset_en=23
- <6>[ 0.236633] ath6kl_wlan_power_init: ath6kl-hsic registration success
- <6>[ 0.236663] ath6kl_wlan_power: Voting for the 1.8V L8 regulator
- <6>[ 0.236785] ath6kl_wlan_power: Voting for ath_pwd_l gpio-regulator
- <3>[ 0.236846] ath6kl_wlan_power: Failed to vote ath_pwd_l gpio-regulator: -517
- <6>[ 0.236938] apq8064_cdp_init: Confg BT-WiFi reset line as volt. reg.
- <6>[ 0.237274] gpio_vreg_probe: id=8, name=bt_wifi_en, gpio=8, gpio_label=gpio_8_vreg
- <4>[ 0.238769] ------------[ cut here ]------------
- <4>[ 0.238830] WARNING: at ../../../../../../kernel/arch/arm/mach-msm/subsystem_restart.c:574 subsys_restart_init+0xd4/0x100()
- <4>[ 0.238861] Modules linked in:
- <4>[ 0.238891] [<c010bb08>] (unwind_backtrace+0x0/0x11c) from [<c016ee7c>] (warn_slowpath_common+0x4c/0x64)
- <4>[ 0.238952] [<c016ee7c>] (warn_slowpath_common+0x4c/0x64) from [<c016eeac>] (warn_slowpath_null+0x18/0x1c)
- <4>[ 0.239013] [<c016eeac>] (warn_slowpath_null+0x18/0x1c) from [<c0d0c39c>] (subsys_restart_init+0xd4/0x100)
- <4>[ 0.239044] [<c0d0c39c>] (subsys_restart_init+0xd4/0x100) from [<c01005e4>] (do_one_initcall+0x90/0x160)
- <4>[ 0.239105] [<c01005e4>] (do_one_initcall+0x90/0x160) from [<c0d00a38>] (kernel_init+0xe8/0x1a4)
- <4>[ 0.239135] [<c0d00a38>] (kernel_init+0xe8/0x1a4) from [<c0106c34>] (kernel_thread_exit+0x0/0x8)
- <4>[ 0.239196] ---[ end trace da227214a82491b7 ]---
- <6>[ 0.242309] sps:BAM 0x12244000 enabled: ver:0x5, number of pipes:20
- <6>[ 0.242340] sps:BAM 0x12244000 is registered.
- <6>[ 0.242889] sps:sps is ready.
- <3>[ 0.243988] msm_pcie_vreg_init: PCIE :: Num Regulators : 3
- <6>[ 0.290496] msm_pcie_setup: link initialized
- <6>[ 0.290832] PCI host bridge to bus 0000:00
- <6>[ 0.290863] pci_bus 0000:00: root bus resource [mem 0x10000000-0x17ffffff]
- <7>[ 0.290924] pci 0000:00:00.0: [17cb:0101] type 01 class 0xff0000
- <7>[ 0.291076] pci 0000:00:00.0: supports D1
- <7>[ 0.291107] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
- <6>[ 0.291198] PCI: bus0: Fast back to back transfers disabled
- <7>[ 0.291351] pci 0000:01:00.0: [1969:2062] type 00 class 0x020000
- <7>[ 0.291442] pci 0000:01:00.0: reg 10: [mem 0x10000000-0x1003ffff 64bit]
- <7>[ 0.291473] pci 0000:01:00.0: reg 18: [io 0x0000-0x007f]
- <7>[ 0.291717] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
- <6>[ 0.291809] PCI: bus1: Fast back to back transfers disabled
- <6>[ 0.292236] pci 0000:00:00.0: BAR 8: assigned [mem 0x10000000-0x100fffff]
- <6>[ 0.292266] pci 0000:00:00.0: BAR 7: can't assign io (size 0x1000)
- <6>[ 0.292297] pci 0000:01:00.0: BAR 0: assigned [mem 0x10000000-0x1003ffff 64bit]
- <6>[ 0.292358] pci 0000:01:00.0: BAR 2: can't assign io (size 0x80)
- <6>[ 0.292388] pci 0000:00:00.0: PCI bridge to [bus 01-01]
- <6>[ 0.292419] pci 0000:00:00.0: bridge window [mem 0x10000000-0x100fffff]
- <4>[ 0.292449] PCI: enabling device 0000:00:00.0 (0140 -> 0143)
- <6>[ 0.321807] bio: create slab <bio-0> at 0
- <6>[ 0.322845] vgaarb: loaded
- <6>[ 0.323028] ION heap vmalloc created
- <6>[ 0.323059] ION heap mm created at a0000000 with size 7800000
- <6>[ 0.323089] ION heap mm_fw created at 9fe00000 with size 1e0000
- <6>[ 0.323150] ION heap mfc created at a7800000 with size 42000
- <6>[ 0.323181] ION heap iommu created
- <6>[ 0.323242] ION heap qsecom created at ff307000 with size 780000
- <6>[ 0.323303] ION heap audio created at ffa87000 with size 4cf000
- <6>[ 0.323333] ION heap adsp created at 0 with size 800000
- <5>[ 0.324371] pm8xxx_pwm_probe: OK
- <5>[ 0.324981] SCSI subsystem initialized
- <6>[ 0.325439] usbcore: registered new interface driver usbfs
- <6>[ 0.325531] usbcore: registered new interface driver hub
- <6>[ 0.325683] usbcore: registered new device driver usb
- <6>[ 0.326049] input: pmic8xxx_pwrkey as /devices/platform/msm_ssbi.0/pm8921-core/pm8xxx-pwrkey/input/input0
- <6>[ 0.326507] Linux media interface: v0.10
- <6>[ 0.326568] Linux video capture interface: v2.00
- <6>[ 0.327423] msm_iommu_dev: device vpe mapped at f0600000, with 2 ctx banks
- <6>[ 0.327545] msm_iommu_dev: device mdp0 mapped at f0800000, with 2 ctx banks
- <6>[ 0.327697] msm_iommu_dev: device mdp1 mapped at f0a00000, with 2 ctx banks
- <6>[ 0.327850] msm_iommu_dev: device rot mapped at f0c00000, with 2 ctx banks
- <6>[ 0.327972] msm_iommu_dev: device ijpeg mapped at f0e00000, with 2 ctx banks
- <6>[ 0.328094] msm_iommu_dev: device vfe mapped at f1000000, with 2 ctx banks
- <6>[ 0.328247] msm_iommu_dev: device vcodec_a mapped at f1200000, with 2 ctx banks
- <6>[ 0.328369] msm_iommu_dev: device vcodec_b mapped at f1400000, with 2 ctx banks
- <6>[ 0.328521] msm_iommu_dev: device gfx3d mapped at f1600000, with 3 ctx banks
- <6>[ 0.328674] msm_iommu_dev: device jpegd mapped at f1800000, with 2 ctx banks
- <6>[ 0.328826] msm_iommu_dev: device gfx3d1 mapped at f1a00000, with 3 ctx banks
- <6>[ 0.328979] msm_iommu_dev: device vcap mapped at f1c00000, with 2 ctx banks
- <6>[ 0.329345] msm_iommu_ctx msm_iommu_ctx.2: context vpe_src using bank 0
- <6>[ 0.329498] msm_iommu_ctx msm_iommu_ctx.3: context vpe_dst using bank 1
- <6>[ 0.329650] msm_iommu_ctx msm_iommu_ctx.4: context mdp_port0_cb0 using bank 0
- <6>[ 0.329803] msm_iommu_ctx msm_iommu_ctx.5: context mdp_port0_cb1 using bank 1
- <6>[ 0.329986] msm_iommu_ctx msm_iommu_ctx.6: context mdp_port1_cb0 using bank 0
- <6>[ 0.330139] msm_iommu_ctx msm_iommu_ctx.7: context mdp_port1_cb1 using bank 1
- <6>[ 0.330322] msm_iommu_ctx msm_iommu_ctx.8: context rot_src using bank 0
- <6>[ 0.330444] msm_iommu_ctx msm_iommu_ctx.9: context rot_dst using bank 1
- <6>[ 0.330627] msm_iommu_ctx msm_iommu_ctx.10: context ijpeg_src using bank 0
- <6>[ 0.330780] msm_iommu_ctx msm_iommu_ctx.11: context ijpeg_dst using bank 1
- <6>[ 0.330932] msm_iommu_ctx msm_iommu_ctx.12: context vfe_imgwr using bank 0
- <6>[ 0.331085] msm_iommu_ctx msm_iommu_ctx.13: context vfe_misc using bank 1
- <6>[ 0.331237] msm_iommu_ctx msm_iommu_ctx.14: context vcodec_a_stream using bank 0
- <6>[ 0.331420] msm_iommu_ctx msm_iommu_ctx.15: context vcodec_a_mm1 using bank 1
- <6>[ 0.331604] msm_iommu_ctx msm_iommu_ctx.16: context vcodec_b_mm2 using bank 0
- <6>[ 0.331848] msm_iommu_ctx msm_iommu_ctx.17: context gfx3d_user using bank 0
- <6>[ 0.332061] msm_iommu_ctx msm_iommu_ctx.18: context gfx3d_priv using bank 1
- <6>[ 0.332214] msm_iommu_ctx msm_iommu_ctx.0: context jpegd_src using bank 0
- <6>[ 0.332336] msm_iommu_ctx msm_iommu_ctx.1: context jpegd_dst using bank 1
- <6>[ 0.332580] msm_iommu_ctx msm_iommu_ctx.19: context gfx3d1_user using bank 0
- <6>[ 0.332794] msm_iommu_ctx msm_iommu_ctx.20: context gfx3d1_priv using bank 1
- <6>[ 0.332977] msm_iommu_ctx msm_iommu_ctx.21: context vcap_vc using bank 0
- <6>[ 0.333099] msm_iommu_ctx msm_iommu_ctx.22: context vcap_vp using bank 1
- <6>[ 0.333251] Advanced Linux Sound Architecture Driver Version 1.0.25.
- <6>[ 0.333770] Bluetooth: Core ver 2.16
- <6>[ 0.333831] NET: Registered protocol family 31
- <6>[ 0.333831] Bluetooth: HCI device and connection manager initialized
- <6>[ 0.333862] Bluetooth: HCI socket layer initialized
- <6>[ 0.333892] Bluetooth: L2CAP socket layer initialized
- <6>[ 0.334106] Bluetooth: SCO socket layer initialized
- <6>[ 0.334411] cfg80211: Calling CRDA to update world regulatory domain
- <6>[ 0.335113] Switching to clocksource gp_timer
- <6>[ 0.364044] NET: Registered protocol family 2
- <6>[ 0.364318] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
- <6>[ 0.364868] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
- <6>[ 0.366119] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
- <6>[ 0.366790] TCP: Hash tables configured (established 131072 bind 65536)
- <6>[ 0.366790] TCP: reno registered
- <6>[ 0.366821] UDP hash table entries: 512 (order: 2, 16384 bytes)
- <6>[ 0.366882] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
- <6>[ 0.367218] NET: Registered protocol family 1
- <6>[ 0.367645] RPC: Registered named UNIX socket transport module.
- <6>[ 0.367675] RPC: Registered udp transport module.
- <6>[ 0.367706] RPC: Registered tcp transport module.
- <6>[ 0.367706] RPC: Registered tcp NFSv4.1 backchannel transport module.
- <7>[ 0.367797] PCI: CLS 64 bytes, default 64
- <6>[ 0.368011] Trying to unpack rootfs image as initramfs...
- <6>[ 0.514038] Freeing initrd memory: 2716K
- <4>[ 0.515228] IDME: initialize Idme driver version 2.0
- <6>[ 0.515380] Detected 9 counters on the L2CC PMU.
- <6>[ 0.516998] pil_qdsp6v4 pil_qdsp6v4.0: using secure boot
- <6>[ 0.519012] pil_dsps pil_dsps: using secure boot
- <6>[ 0.519775] pil_gss pil_gss: using secure boot
- <3>[ 0.521667] smd_channel_probe_worker: allocation table not initialized
- <6>[ 0.527191] msm_dsps driver version 4.03.
- <6>[ 0.528198] NET: Registered protocol family 27
- <6>[ 0.530639] lpass_fatal_init: lpass SSR driver init'ed.
- <6>[ 0.531127] acpuclk-8064 acpuclk-8064: SPEED BIN: 1
- <6>[ 0.531158] acpuclk-8064 acpuclk-8064: ACPU PVS: 4
- <6>[ 0.533203] acpuclk-8064 acpuclk-8064: CPU0: 14 frequencies supported
- <6>[ 0.533233] acpuclk-8064 acpuclk-8064: CPU1: 14 frequencies supported
- <6>[ 0.533264] acpuclk-8064 acpuclk-8064: CPU2: 14 frequencies supported
- <6>[ 0.533294] acpuclk-8064 acpuclk-8064: CPU3: 14 frequencies supported
- <5>[ 0.535675] msm_rpm_log_probe: OK
- <6>[ 0.538360] usbcore: registered new interface driver hsic_sysmon
- <4>[ 0.689483] highmem bounce pool size: 64 pages
- <5>[ 0.705657] NFS: Registering the id_resolver key type
- <6>[ 0.707946] fuse init (API version 7.18)
- <6>[ 0.708526] msgmni has been set to 1363
- <6>[ 0.712432] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
- <6>[ 0.712524] io scheduler noop registered
- <6>[ 0.712554] io scheduler deadline registered
- <6>[ 0.712921] io scheduler cfq registered (default)
- <3>[ 0.717346] Couldnt find lvds_clk
- <6>[ 0.717895] mipi_dsi base phy_addr = 0x4700000 virt = 0xf1e00000
- <6>[ 0.717956] mmss_sfpb base phy_addr = 0x5700000,virt = 0xf00b0000
- <3>[ 0.719024]
- <3>[ 0.719024] name = mipi_video_toshiba_wvga, prim_display = hdmi_msm
- <3>[ 0.719085]
- <3>[ 0.719085] name = mipi_video_toshiba_wsvga, prim_display = hdmi_msm
- <3>[ 0.719146]
- <3>[ 0.719146] name = mipi_video_toshiba_wuxga, prim_display = hdmi_msm
- <3>[ 0.719207]
- <3>[ 0.719207] name = mipi_video_novatek_qhd, prim_display = hdmi_msm
- <3>[ 0.719268]
- <3>[ 0.719299] name = mipi_video_orise_720p, prim_display = hdmi_msm
- <3>[ 0.719329]
- <3>[ 0.719360] name = mipi_cmd_orise_720p, prim_display = hdmi_msm
- <3>[ 0.719390]
- <3>[ 0.719421] name = mipi_cmd_novatek_qhd, prim_display = hdmi_msm
- <3>[ 0.719451]
- <3>[ 0.719482] name = mipi_video_renesas_fwvga, prim_display = hdmi_msm
- <3>[ 0.719512]
- <3>[ 0.719543] name = mipi_cmd_renesas_fwvga, prim_display = hdmi_msm
- <3>[ 0.719604]
- <3>[ 0.719604] name = mipi_video_truly_wvga, prim_display = hdmi_msm
- <3>[ 0.719665]
- <3>[ 0.719665] name = mipi_cmd_nt35510_wvga, prim_display = hdmi_msm
- <3>[ 0.719726]
- <3>[ 0.719726] name = mipi_video_nt35510_wvga, prim_display = hdmi_msm
- <3>[ 0.719787]
- <3>[ 0.719787] name = mipi_video_simulator_vga, prim_display = hdmi_msm
- <3>[ 0.719848]
- <3>[ 0.719848] name = mipi_video_chimei_wxga, prim_display = hdmi_msm
- <3>[ 0.719909]
- <3>[ 0.719909] name = mipi_video_chimei_wuxga, prim_display = hdmi_msm
- <3>[ 0.719970]
- <3>[ 0.719970] name = lvds_chimei_wxga, prim_display = hdmi_msm
- <3>[ 0.720031]
- <3>[ 0.720031] name = hdmi_msm, prim_display = hdmi_msm
- <6>[ 0.721191] hdmi_msm hdmi_msm.1: hdmi_msm_probe: msm-dai: 0xf00c0000
- <6>[ 0.721252] hdmi_msm hdmi_msm.1: lpa_dma_idle = 0x4002d8
- <6>[ 0.721282] hdmi_audio_packet_enable : HDMI_AUDIO_PKT_CTRL 0x00000010
- <6>[ 0.745513] hdmi_msm hdmi_msm.1: lpa_dma_idle = 0x6001ac
- <6>[ 0.775512] hdmi_msm hdmi_msm.1: lpa_dma_idle = 0x6001ac
- <6>[ 0.775543] hdmi_msm hdmi_msm.1: hdmi_msm_probe: DAI DMA idle after 20 ms
- <6>[ 0.775604] hdmi_audio_enable :HDMI_AUDIO_CFG 0x00000040
- <6>[ 0.775909] setting pdata->panel_info.fb_num to 2. type: 7
- <6>[ 0.803466] FrameBuffer[0] 1920x1080 size=16588800 bytes is registered successfully!
- <7>[ 0.803894] Registered led device: lcd-backlight
- <6>[ 0.803955] mdp4_dtv_vsync_init: ndx=0
- <3>[ 0.804138] hdmi_msm hdmi_msm.1: external_common_state_create: sysfs group e76e7408
- <6>[ 0.804351] hdmi_msm_hpd_polarity_setup: polarity=1 external_common_state->hpd_state=0
- <6>[ 0.804382] hdmi_msm_hpd_polarity_setup: listen=connect, sense=disconnect, trigger=No, hpd_state 0
- <6>[ 0.804412] hdmi_msm_hpd_on: exit
- <6>[ 0.804443] hdmi_msm_config_hdcp_feature: HDCP Feature: Enabled
- <6>[ 0.804870] input: HDMI CEC User or Deck Control as /devices/virtual/input/input1
- <6>[ 0.805603] setting pdata->panel_info.fb_num to 2. type: 10
- <3>[ 0.805816] Inside writeback_driver_init
- <3>[ 0.806091] Inside writeback_probe
- <6>[ 0.806793] FrameBuffer[1] 1280x720 size=0 bytes is registered successfully!
- <6>[ 0.808227]
- <6>[ 0.808227] msm_vidc_enc: Inside vid_enc_init()
- <6>[ 0.808471]
- <6>[ 0.808471] msm_vidc_enc: Inside vid_enc_vcd_init()
- <6>[ 0.809967] msm_serial_hs.0: ttyHS0 at MMIO 0x16540000 (irq = 188) is a MSM HS UART
- <6>[ 0.810241] msm_serial_hs module loaded
- <6>[ 0.810455] msm_serial_hsl: detected port #2
- <6>[ 0.810607] msm_serial_hsl.2: ttyHSL2 at MMIO 0x16340000 (irq = 184) is a MSM
- <6>[ 0.810913] msm_serial_hsl: driver initialized
- <6>[ 0.812408] msm_rotator_probe: rotator_hw_revision=2
- <6>[ 0.812744] hdmi_msm_isr: Queuing work to handle HPD connect event
- <6>[ 0.812866] hdmi_msm_hpd_state_work hpd_state=1
- <6>[ 0.815490] diagchar initialized now
- <6>[ 0.818603] kgsl kgsl-3d0: |kgsl_iommu_init| MMU type set for device is IOMMU
- <6>[ 0.827575] brd: module loaded
- <6>[ 0.831512] loop: module loaded
- <4>[ 0.831878] i2c-core: driver [isa1200] using legacy suspend method
- <4>[ 0.831909] i2c-core: driver [isa1200] using legacy resume method
- <4>[ 0.833740] i2c-core: driver [tabla-i2c-core] using legacy suspend method
- <4>[ 0.833770] i2c-core: driver [tabla-i2c-core] using legacy resume method
- <6>[ 0.835113] SCSI Media Changer driver v0.25
- <6>[ 0.835845] spi_qsd spi_qsd.2: master is unqueued, this is deprecated
- <6>[ 0.836975] tun: Universal TUN/TAP device driver, 1.6
- <6>[ 0.837005] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- <6>[ 0.837127] Qualcomm Atheros(R) AR813x/AR815x/AR816x PCI-E Ethernet Network Driver
- <6>[ 0.837158] -----ALX_V1.0.0.2-----
- <4>[ 0.837249] PCI: enabling device 0000:01:00.0 (0140 -> 0142)
- <6>[ 0.837280] alx 0000:01:00.0: DMA to 64-BIT addresses
- <6>[ 0.837371] alx_hw: HW Flags = 0x10
- <6>[ 0.837860] alx_hw: reset PHY, pws = 1, az = 0, ptp = 0
- <6>[ 0.837921] hdmi_edid_workaround_detection 0
- <6>[ 0.837982] edid[8]=4c 2d c2 7 1 0 0 0
- <6>[ 0.838012] edid[16]=2e 14
- <6>[ 0.838043] 2 3a 80 18 71 38 2d 40 58 2c
- <6>[ 0.838104] 45 0 a0 5a 0 0 0 1e 66 21
- <6>[ 0.838134] 50 b0 51 0 1b 30 40 70 36 0
- <6>[ 0.838195] a0 5a 0 0 0 1e 0 0 0 fd
- <6>[ 0.838226] 0 18 4b 1a 51 17 0 a 20 20
- <6>[ 0.838256] 20 20 20 20 0 0 0 fc 0 53
- <6>[ 0.838317] 41 4d 53 55 4e 47 a 20 20 20
- <6>[ 0.859252] alx_hw: speed = 0x2f, autoneg = 1
- <6>[ 0.860229] alx: Use random generate the mac address
- <6>[ 0.860900] alx: Atheros Gigabit Network Connection
- <6>[ 0.861022] rmnet_init: BAM devices[8]
- <6>[ 0.863159] hdmi_edid_extract_audio_data_blocks adb=ed90876b, in_buf=ed908760, len=3, next=15
- <4>[ 0.863250] hdmi_msm hdmi_msm.1: EDID: type=1 block not found in EDID block
- <6>[ 0.863281] EDID: 3D present, 3D-len=6
- <4>[ 0.863311] hdmi_msm hdmi_msm.1: EDID: type=7 block not found in EDID block
- <6>[ 0.863372] EDID (V=1.3, #CEABlocks=1[V3], ID=SAM, IEEE=0c03, EDID-Ext=0x02)
- <6>[ 0.863555] hdmi_msm_send_event: hdmi state switched to 1
- <6>[ 0.875061] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
- <6>[ 0.875091] CSLIP: code copyright 1989 Regents of the University of California.
- <6>[ 0.875976] usbcore: registered new interface driver asix
- <6>[ 0.876068] usbcore: registered new interface driver cdc_ether
- <6>[ 0.876159] usbcore: registered new interface driver net1080
- <6>[ 0.876251] usbcore: registered new interface driver cdc_subset
- <6>[ 0.876342] usbcore: registered new interface driver zaurus
- <6>[ 0.876708] usbcore: registered new interface driver cdc_ncm
- <6>[ 0.876892] msm_otg msm_otg: msm_otg probe
- <3>[ 0.876983] msm_otg msm_otg: failed to get phy_clk
- <6>[ 0.877136] msm_otg msm_otg: OTG regs = f00d8000
- <6>[ 0.880432] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- <6>[ 0.893585] msm_hsic_host msm_hsic_host: Qualcomm EHCI Host Controller using HSIC
- <6>[ 0.893615] msm_hsic_host msm_hsic_host: new USB bus registered, assigned bus number 1
- <6>[ 0.915527] msm_hsic_host msm_hsic_host: irq 261, io mem 0x12510000
- <6>[ 0.935516] msm_hsic_host msm_hsic_host: USB 2.0 started, EHCI 1.00
- <6>[ 0.935791] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- <6>[ 0.935821] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- <6>[ 0.935852] usb usb1: Product: Qualcomm EHCI Host Controller using HSIC
- <6>[ 0.935852] usb usb1: Manufacturer: Linux 3.4.0-perf-g1e74d58-dirty ehci_hcd
- <6>[ 0.935882] usb usb1: SerialNumber: msm_hsic_host
- <6>[ 0.936340] hub 1-0:1.0: USB hub found
- <6>[ 0.936401] hub 1-0:1.0: 1 port detected
- <6>[ 0.939453] msm_ehci_host msm_ehci_host.0: phy_reset: success
- <6>[ 1.045532] msm_ehci_host msm_ehci_host.0: Qualcomm EHCI Host Controller
- <6>[ 1.045562] msm_ehci_host msm_ehci_host.0: new USB bus registered, assigned bus number 2
- <6>[ 1.075927] msm_ehci_host msm_ehci_host.0: irq 220, io mem 0x12520000
- <6>[ 1.095550] msm_ehci_host msm_ehci_host.0: USB 2.0 started, EHCI 1.00
- <6>[ 1.095642] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
- <6>[ 1.095672] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- <6>[ 1.095703] usb usb2: Product: Qualcomm EHCI Host Controller
- <6>[ 1.095733] usb usb2: Manufacturer: Linux 3.4.0-perf-g1e74d58-dirty ehci_hcd
- <6>[ 1.095764] usb usb2: SerialNumber: msm_ehci_host.0
- <6>[ 1.096160] hub 2-0:1.0: USB hub found
- <6>[ 1.096221] hub 2-0:1.0: 1 port detected
- <6>[ 1.098327] msm_ehci_host msm_ehci_host.1: phy_reset: success
- <6>[ 1.205993] msm_ehci_host msm_ehci_host.1: Qualcomm EHCI Host Controller
- <6>[ 1.206024] msm_ehci_host msm_ehci_host.1: new USB bus registered, assigned bus number 3
- <6>[ 1.235656] msm_ehci_host msm_ehci_host.1: irq 247, io mem 0x12530000
- <6>[ 1.256011] msm_ehci_host msm_ehci_host.1: USB 2.0 started, EHCI 1.00
- <6>[ 1.256103] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
- <6>[ 1.256134] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- <6>[ 1.256164] usb usb3: Product: Qualcomm EHCI Host Controller
- <6>[ 1.256195] usb usb3: Manufacturer: Linux 3.4.0-perf-g1e74d58-dirty ehci_hcd
- <6>[ 1.256195] usb usb3: SerialNumber: msm_ehci_host.1
- <6>[ 1.256622] hub 3-0:1.0: USB hub found
- <6>[ 1.256652] hub 3-0:1.0: 1 port detected
- <6>[ 1.257507] usbcore: registered new interface driver cdc_acm
- <6>[ 1.257537] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
- <6>[ 1.257568] Initializing USB Mass Storage driver...
- <6>[ 1.257720] usbcore: registered new interface driver usb-storage
- <6>[ 1.257751] USB Mass Storage support registered.
- <6>[ 1.257843] usbcore: registered new interface driver ums-alauda
- <6>[ 1.257934] usbcore: registered new interface driver ums-cypress
- <6>[ 1.258026] usbcore: registered new interface driver ums-datafab
- <6>[ 1.258148] usbcore: registered new interface driver ums-freecom
- <6>[ 1.258239] usbcore: registered new interface driver ums-isd200
- <6>[ 1.258331] usbcore: registered new interface driver ums-jumpshot
- <6>[ 1.258422] usbcore: registered new interface driver ums-karma
- <6>[ 1.258544] usbcore: registered new interface driver ums-onetouch
- <6>[ 1.258636] usbcore: registered new interface driver ums-sddr09
- <6>[ 1.258728] usbcore: registered new interface driver ums-sddr55
- <6>[ 1.258819] usbcore: registered new interface driver ums-usbat
- <6>[ 1.259002] usbcore: registered new interface driver usbserial
- <6>[ 1.259033] usbserial: USB Serial Driver core
- <6>[ 1.259124] usbcore: registered new interface driver qc_csvt
- <6>[ 1.259185] USB Serial support registered for qc_csvt
- <6>[ 1.259307] usbcore: registered new interface driver usb_ehset_test
- <6>[ 1.259399] usbcore: registered new interface driver diag_bridge
- <6>[ 1.259887] usbcore: registered new interface driver mdm_bridge
- <6>[ 1.261077] usbcore: registered new interface driver ks_bridge
- <6>[ 1.261138] ksb_init: init done
- <6>[ 1.261627] msm_otg msm_otg: phy_reset: success
- <6>[ 1.263183] msm_hsusb msm_hsusb: [ci13xxx_start] hw_ep_max = 32
- <6>[ 1.263549] mbim_init: initialize 1 instances
- <6>[ 1.263732] mbim_init: Initialized 1 ports
- <6>[ 1.267028] rndis_qc_init: initialize rndis QC instance
- <6>[ 1.267608] android_usb gadget: Mass Storage Function, version: 2009/09/11
- <6>[ 1.267669] android_usb gadget: Number of LUNs=1
- <6>[ 1.267730] lun0: LUN: removable file: (no medium)
- <6>[ 1.268371] android_usb gadget: android_usb ready
- <6>[ 1.269714] mousedev: PS/2 mouse device common for all mice
- <6>[ 1.271636] usbcore: registered new interface driver xpad
- <6>[ 1.271789] cyttsp_init:Cypress TrueTouch(R) Standard Product
- <6>[ 1.271820] cyttsp_init:I2C Touchscreen Driver (Built Sep 26 2014 @ 20:32:24)
- <6>[ 1.272186] lis3dh_acc accelerometer driver: init
- <4>[ 1.272277] i2c-core: driver [lis3dh_acc] using legacy suspend method
- <4>[ 1.272338] i2c-core: driver [lis3dh_acc] using legacy resume method
- <6>[ 1.273864] using rtc device, pm8xxx_rtc, for alarms
- <6>[ 1.273956] rtc-pm8xxx rtc-pm8xxx: rtc core: registered pm8xxx_rtc as rtc0
- <6>[ 1.274597] i2c /dev entries driver
- <6>[ 1.275177] lirc_dev: IR Remote Control driver registered, major 239
- <6>[ 1.275238] IR NEC protocol handler initialized
- <6>[ 1.275268] IR RC5(x) protocol handler initialized
- <6>[ 1.275329] IR RC6 protocol handler initialized
- <6>[ 1.275360] IR JVC protocol handler initialized
- <6>[ 1.275390] IR Sony protocol handler initialized
- <6>[ 1.275421] IR RC5 (streamzap) protocol handler initialized
- <6>[ 1.275482] IR SANYO protocol handler initialized
- <6>[ 1.275512] IR MCE Keyboard/mouse protocol handler initialized
- <6>[ 1.275543] IR LIRC bridge handler initialized
- <6>[ 1.276000] rc-user-input rc-user-input: User space report key event input loopback driver registered, major 238
- <6>[ 1.276245] Registered IR keymap rc-ue-rf4ce
- <6>[ 1.276824] input: user-rc-input as /devices/virtual/rc/rc0/input2
- <6>[ 1.277069] rc0: user-rc-input as /devices/virtual/rc/rc0
- <6>[ 1.277862] usbcore: registered new interface driver uvcvideo
- <6>[ 1.277923] USB Video Class driver (1.1.1)
- <6>[ 1.281280] lm75 4-0048: hwmon0: sensor 'tmp105'
- <6>[ 1.281890] lm75 5-0049: hwmon1: sensor 'tmp105'
- <3>[ 1.282745] pm8xxx_adc_probe: failed to request pa_therm vreg with error -517
- <6>[ 1.305816] pm8xxx_tm_probe: OK
- <6>[ 1.306335] pm8xxx_tm_probe: OK
- <6>[ 1.307220] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
- <6>[ 1.307434] Bluetooth: HCI UART driver ver 2.2
- <6>[ 1.307464] Bluetooth: HCI H4 protocol initialized
- <6>[ 1.307495] Bluetooth: HCIATH3K protocol initialized
- <6>[ 1.307800] Bluetooth: HCI_IBS protocol initialized
- <6>[ 1.308868] cpuidle: using governor ladder
- <6>[ 1.308898] cpuidle: using governor menu
- <6>[ 1.309326] mmc0: SDCC Version: 0x06000018
- <6>[ 1.310882] mmc0: bam physical base=0x12402000
- <6>[ 1.310913] mmc0: bam virtual base=0xf00e8000
- <6>[ 1.310943] sps:BAM 0x12402000 is registered.
- <6>[ 1.310974] mmc0: BAM device registered. bam_handle=0xed448600
- <6>[ 1.311950] sps:BAM 0x12402000 enabled: ver:0x5, number of pipes:6
- <6>[ 1.312774] mmc0: Qualcomm MSM SDCC-BAM at 0x0000000012402000 irq 130
- <6>[ 1.312835] mmc0: Qualcomm MSM SDCC-DML at 0x0000000012400800
- <3>[ 1.312896] mmc0: No card detect facilities available
- <6>[ 1.314636] mmc0: Qualcomm MSM SDCC-core at 0x0000000012400000 irq 136,0 dma -1 dmacrcri -1
- <6>[ 1.314666] mmc0: Controller capabilities: 0x0000019a
- <6>[ 1.314697] mmc0: 8 bit data mode enabled
- <6>[ 1.314727] mmc0: 4 bit data mode disabled
- <6>[ 1.314727] mmc0: polling status mode disabled
- <6>[ 1.314758] mmc0: MMC clock 400000 -> 192000000 Hz, PCLK 0 Hz
- <6>[ 1.314788] mmc0: Slot eject status = 0
- <6>[ 1.314788] mmc0: Power save feature enable = 1
- <6>[ 1.314819] mmc0: SPS-BAM data transfer mode available
- <7>[ 1.315246] Registered led device: bueller-status
- <7>[ 1.315368] Registered led device: bueller-error
- <6>[ 1.316253] usbcore: registered new interface driver usbhid
- <6>[ 1.316284] usbhid: USB HID core driver
- <6>[ 1.317474] ashmem: initialized
- <6>[ 1.317840] logger: created 256K log 'log_main'
- <6>[ 1.318145] logger: created 256K log 'log_events'
- <6>[ 1.318481] logger: created 256K log 'log_radio'
- <6>[ 1.318817] logger: created 256K log 'log_system'
- <6>[ 1.319122] logger: created 256K log 'log_metrics'
- <6>[ 1.319458] logger: created 256K log 'log_amazon_main'
- <6>[ 1.321929] coresight-tpiu coresight-tpiu.0: TPIU initialized
- <6>[ 1.322784] coresight-etb coresight-etb.0: ETB initialized
- <6>[ 1.323455] coresight-funnel coresight-funnel.0: FUNNEL initialized
- <3>[ 1.325225] coresight-etm coresight-etm.0: ETM REG dump setup failed/unsupported
- <6>[ 1.325714] coresight-etm coresight-etm.0: ETM initialized
- <3>[ 1.326721] coresight-etm coresight-etm.1: ETM REG dump setup failed/unsupported
- <6>[ 1.327148] coresight-etm coresight-etm.1: ETM initialized
- <3>[ 1.328155] coresight-etm coresight-etm.2: ETM REG dump setup failed/unsupported
- <6>[ 1.328552] coresight-etm coresight-etm.2: ETM initialized
- <3>[ 1.329559] coresight-etm coresight-etm.3: ETM REG dump setup failed/unsupported
- <6>[ 1.329986] coresight-etm coresight-etm.3: ETM initialized
- <6>[ 1.330902] usbcore: registered new interface driver snd-usb-audio
- <6>[ 1.333526] dit4192_spi_probe():
- <6>[ 1.355804] dit4192_poweron: dit4192_poweron
- <6>[ 1.360504] dit4192_check_device: found device.
- <6>[ 1.393218] msm_pcm_probe: dev name msm-voip-dsp
- <6>[ 1.403808] msm-dai-q6-mi2s msm-dai-q6-mi2s: msm_dai_q6_mi2s_platform_data_validation: playback sdline 1 capture sdline 0
- <6>[ 1.403839] msm-dai-q6-mi2s msm-dai-q6-mi2s: msm_dai_q6_mi2s_platform_data_validation: playback ch_max 2 capture ch_mx 0
- <6>[ 1.408111] msm_pcm_probe: dev name msm-pcm-dsp
- <6>[ 1.408447] msm_pcm_probe: dev name msm-multi-ch-pcm-dsp
- <6>[ 1.408782] msm_pcm_probe: dev name msm-lowlatency-pcm-dsp
- <6>[ 1.409759] msm_compr_probe: dev name msm-compr-dsp
- <6>[ 1.410400] msm-pcm-lpa msm-pcm-lpa: msm_pcm_probe: dev name msm-pcm-lpa
- <6>[ 1.410919] msm_audio_init:
- <4>[ 1.412109] ASoC: Failed to create platform debugfs directory
- <6>[ 1.437042] asoc: snd-soc-dummy-dai <-> MultiMedia1 mapping ok
- <6>[ 1.438049] asoc: snd-soc-dummy-dai <-> MultiMedia2 mapping ok
- <6>[ 1.438964] asoc: snd-soc-dummy-dai <-> CS-VOICE mapping ok
- <6>[ 1.439849] asoc: snd-soc-dummy-dai <-> VoIP mapping ok
- <6>[ 1.440795] asoc: snd-soc-dummy-dai <-> MultiMedia3 mapping ok
- <6>[ 1.441711] asoc: snd-soc-dummy-dai <-> SLIMBUS0_HOSTLESS mapping ok
- <6>[ 1.442596] asoc: snd-soc-dummy-dai <-> INT_FM_HOSTLESS mapping ok
- <6>[ 1.443420] asoc: msm-stub-rx <-> msm-dai-q6.241 mapping ok
- <6>[ 1.444244] asoc: msm-stub-tx <-> msm-dai-q6.240 mapping ok
- <6>[ 1.445251] asoc: snd-soc-dummy-dai <-> MultiMedia4 mapping ok
- <6>[ 1.446258] asoc: snd-soc-dummy-dai <-> VOICE_STUB mapping ok
- <6>[ 1.447082] asoc: snd-soc-dummy-dai <-> HDMI_HOSTLESS mapping ok
- <6>[ 1.447998] mmc0: BKOPS_EN bit = 1
- <6>[ 1.448089] asoc: snd-soc-dummy-dai <-> MI2S_TX_HOSTLESS mapping ok
- <6>[ 1.449157] asoc: snd-soc-dummy-dai <-> SEC_I2S_RX_HOSTLESS mapping ok
- <6>[ 1.450439] asoc: snd-soc-dummy-dai <-> MultiMedia5 mapping ok
- <6>[ 1.451416] asoc: snd-soc-dummy-dai <-> MultiMedia6 mapping ok
- <6>[ 1.452392] asoc: snd-soc-dummy-dai <-> MultiMedia7 mapping ok
- <6>[ 1.453369] asoc: snd-soc-dummy-dai <-> MultiMedia8 mapping ok
- <6>[ 1.454284] asoc: snd-soc-dummy-dai <-> AUXPCM_HOSTLESS mapping ok
- <6>[ 1.455169] asoc: snd-soc-dummy-dai <-> Pseudo mapping ok
- <6>[ 1.456207] asoc: snd-soc-dummy-dai <-> MultiMedia9 mapping ok
- <6>[ 1.457153] asoc: snd-soc-dummy-dai <-> MultiMedia10 mapping ok
- <6>[ 1.458129] asoc: snd-soc-dummy-dai <-> MultiMedia11 mapping ok
- <6>[ 1.458892] asoc: msm-stub-rx <-> msm-dai-q6.12292 mapping ok
- <6>[ 1.459686] asoc: msm-stub-tx <-> msm-dai-q6.12293 mapping ok
- <6>[ 1.460449] asoc: msm-stub-rx <-> msm-dai-q6-hdmi.8 mapping ok
- <6>[ 1.461212] asoc: spdif_rx <-> msm-dai-q6-mi2s mapping ok
- <6>[ 1.461975] asoc: msm-stub-rx <-> msm-dai-q6.224 mapping ok
- <6>[ 1.462738] asoc: msm-stub-tx <-> msm-dai-q6.225 mapping ok
- <6>[ 1.463500] asoc: msm-stub-rx <-> msm-dai-q6.2 mapping ok
- <6>[ 1.464263] asoc: msm-stub-tx <-> msm-dai-q6.3 mapping ok
- <6>[ 1.465026] asoc: snd-soc-dummy-dai <-> msm-dai-q6.32769 mapping ok
- <3>[ 1.467010] soc-audio soc-audio.0: DAI AIF widget for MM_UL12 not found
- <3>[ 1.467041] soc-audio soc-audio.0: DAI AIF widget for MM_UL12 not found
- <3>[ 1.467071] soc-audio soc-audio.0: DAI AIF widget for MM_UL12 not found
- <3>[ 1.467132] soc-audio soc-audio.0: DAI AIF widget for MM_UL12 not found
- <3>[ 1.467163] soc-audio soc-audio.0: DAI AIF widget for MM_UL12 not found
- <3>[ 1.467193] soc-audio soc-audio.0: DAI AIF widget for MM_UL12 not found
- <3>[ 1.467224] soc-audio soc-audio.0: DAI AIF widget for MM_UL12 not found
- <3>[ 1.467254] soc-audio soc-audio.0: DAI AIF widget for MM_UL12 not found
- <3>[ 1.467285] soc-audio soc-audio.0: DAI AIF widget for MM_UL12 not found
- <3>[ 1.467315] msm-dai-fe msm-dai-fe: unable to find capture DAI AIF MM_UL12
- <6>[ 1.470245] mmc0: new HS200 MMC card at address 0001
- <6>[ 1.470916] mmcblk0: mmc0:0001 M8G1GC 7.28 GiB
- <6>[ 1.471740] mmcblk0boot0: mmc0:0001 M8G1GC partition 1 4.00 MiB
- <6>[ 1.472534] mmcblk0boot1: mmc0:0001 M8G1GC partition 2 4.00 MiB
- <6>[ 1.478485] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20
- <6>[ 1.479888] oprofile: using arm/armv7-krait
- <6>[ 1.480133] u32 classifier
- <6>[ 1.480163] Actions configured
- <6>[ 1.480224] Netfilter messages via NETLINK v0.30.
- <6>[ 1.480377] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
- <6>[ 1.482055] ctnetlink v0.93: registering with nfnetlink.
- <6>[ 1.482208] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
- <6>[ 1.482238] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
- <6>[ 1.482910] mmcblk0boot1: unknown partition table
- <6>[ 1.482940] xt_time: kernel timezone is -0000
- <6>[ 1.483978] ip_tables: (C) 2000-2006 Netfilter Core Team
- <6>[ 1.484008] mmcblk0boot0: unknown partition table
- <6>[ 1.484680] arp_tables: (C) 2002 David S. Miller
- <6>[ 1.484893] TCP: cubic registered
- <6>[ 1.486389] NET: Registered protocol family 10
- <6>[ 1.493316] Mobile IPv6
- <6>[ 1.493408] ip6_tables: (C) 2000-2006 Netfilter Core Team
- <6>[ 1.493927] IPv6 over IPv4 tunneling driver
- <6>[ 1.495208] NET: Registered protocol family 17
- <6>[ 1.495574] Bluetooth: RFCOMM TTY layer initialized
- <6>[ 1.495697] Bluetooth: RFCOMM socket layer initialized
- <6>[ 1.495727] Bluetooth: RFCOMM ver 1.11
- <6>[ 1.495788] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- <6>[ 1.495819] Bluetooth: BNEP filters: protocol multicast
- <6>[ 1.495880] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
- <5>[ 1.496154] Registering the dns_resolver key type
- <6>[ 1.497283] VFP support v0.3: implementor 51 architecture 64 part 6f variant 1 rev 0
- <5>[ 1.497436] Registering SWP/SWPB emulation handler
- <6>[ 1.497467] clock_late_init: Removing enables held for handed-off clocks
- <6>[ 1.504302] MSM Watchdog Initialized
- <6>[ 1.508789] rtc-pm8xxx rtc-pm8xxx: setting system clock to 1970-01-01 00:01:09 UTC (69)
- <4>[ 1.509918] set_battery_data: invalid battid, palladium 1500 assumed batt_id 8b1d
- <3>[ 1.510467] read_ocv_trim: program rev reg is 0x54
- <3>[ 1.510467] read_ocv_trim: trim reg is 0x47
- <3>[ 1.510498] read_ocv_trim: trim delta is 2
- <3>[ 1.510528] pm8921_is_usb_chg_plugged_in: called before init
- <6>[ 1.511627] pm8921_bms_probe: OK battery_capacity_at_boot=100 volt = 3395742 ocv = 3400327, battery_less_hardware = 1
- <3>[ 1.512481] power_supply usb: driver failed to report `present' property: 4294967274
- <3>[ 1.512542] power_supply usb: driver failed to report `present' property: 4294967274
- <3>[ 1.512603] power_supply pm8921-dc: driver failed to report `present' property: 4294967274
- <3>[ 1.512634] power_supply pm8921-dc: driver failed to report `present' property: 4294967274
- <3>[ 1.512756] power_supply battery: driver failed to report `present' property: 4294967274
- <3>[ 1.512878] power_supply battery: driver failed to report `present' property: 4294967274
- <6>[ 1.517364] ALSA device list:
- <6>[ 1.517364] #0: bueller-snd-card
- <6>[ 1.517517] Freeing init memory: 112K
- <3>[ 1.519927] init: could not import file '/init.recovery.qcom.rc' from '/init.rc'
- <3>[ 1.520263] init: cannot find '/sbin/healthd', disabling 'healthd'
- <6>[ 1.625946] msm_hsusb_host msm_hsusb_host: Qualcomm On-Chip EHCI Host Controller
- <6>[ 1.625976] msm_hsusb_host msm_hsusb_host: new USB bus registered, assigned bus number 4
- <6>[ 1.655761] msm_hsusb_host msm_hsusb_host: irq 132, io mem 0x12500000
- <6>[ 1.675781] msm_hsusb_host msm_hsusb_host: USB 2.0 started, EHCI 1.00
- <6>[ 1.675842] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
- <6>[ 1.675872] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- <6>[ 1.675872] usb usb4: Product: Qualcomm On-Chip EHCI Host Controller
- <6>[ 1.675903] usb usb4: Manufacturer: Linux 3.4.0-perf-g1e74d58-dirty ehci_hcd
- <6>[ 1.675903] usb usb4: SerialNumber: msm_hsusb_host
- <6>[ 1.676147] hub 4-0:1.0: USB hub found
- <6>[ 1.676177] hub 4-0:1.0: 1 port detected
- <3>[ 1.763824] enable_store: android_usb: already disabled
- <3>[ 1.764587] init: Unable to open persistent property directory /data/property errno: 2
- <6>[ 1.776641] ADDRCONF(NETDEV_UP): eth0: link is not ready
- <6>[ 1.995910] usb 4-1: new high-speed USB device number 2 using msm_hsusb_host
- <6>[ 2.147644] usb 4-1: New USB device found, idVendor=05e3, idProduct=0608
- <6>[ 2.147674] usb 4-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
- <6>[ 2.147674] usb 4-1: Product: USB2.0 Hub
- <6>[ 2.148254] hub 4-1:1.0: USB hub found
- <6>[ 2.148651] hub 4-1:1.0: 4 ports detected
- <6>[ 2.206085] mmc0: mmc_start_bkops: raw_bkops_status=0x2, from_exception=1
- <6>[ 2.426330] usb 4-1.1: new high-speed USB device number 3 using msm_hsusb_host
- <7>[ 2.485107] EXT4-fs (mmcblk0p20): ext4_orphan_cleanup: deleting unreferenced inode 57141
- <7>[ 2.485290] EXT4-fs (mmcblk0p20): ext4_orphan_cleanup: deleting unreferenced inode 57131
- <6>[ 2.485351] EXT4-fs (mmcblk0p20): 2 orphan inodes deleted
- <6>[ 2.485351] EXT4-fs (mmcblk0p20): recovery complete
- <6>[ 2.493560] EXT4-fs (mmcblk0p20): mounted filesystem with ordered data mode. Opts: barrier=1,noauto_da_alloc
- <6>[ 2.497222] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
- <6>[ 2.538299] usb 4-1.1: New USB device found, idVendor=154b, idProduct=007a
- <6>[ 2.538299] usb 4-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- <6>[ 2.538330] usb 4-1.1: Product: USB 2.0 FD
- <6>[ 2.538330] usb 4-1.1: Manufacturer: PNY Technologies
- <6>[ 2.538330] usb 4-1.1: SerialNumber: 0416KK00000066846984
- <6>[ 2.538940] scsi0 : usb-storage 4-1.1:1.0
- <6>[ 2.557769] adb_open
- <6>[ 2.557769] adb_bind_config
- <6>[ 2.616455] usb 4-1.2: new low-speed USB device number 4 using msm_hsusb_host
- <6>[ 2.711364] mmc0: mmc_start_bkops: Starting bkops
- <6>[ 2.743804] usb 4-1.2: New USB device found, idVendor=045e, idProduct=071d
- <6>[ 2.743804] usb 4-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- <6>[ 2.743835] usb 4-1.2: Product: Microsoft® 2.4GHz Transceiver V1.0
- <6>[ 2.743835] usb 4-1.2: Manufacturer: Microsoft
- <6>[ 2.751342] input: Microsoft Microsoft® 2.4GHz Transceiver V1.0 as /devices/platform/msm_hsusb_host/usb4/4-1/4-1.2/4-1.2:1.0/input/input3
- <6>[ 2.751495] generic-usb 0003:045E:071D.0001: input: USB HID v1.11 Keyboard [Microsoft Microsoft® 2.4GHz Transceiver V1.0]
- <6>[ 2.812530] input: Microsoft Microsoft® 2.4GHz Transceiver V1.0 as /devices/platform/msm_hsusb_host/usb4/4-1/4-1.2/4-1.2:1.1/input/input4
- <6>[ 2.812927] generic-usb 0003:045E:071D.0002: input: USB HID v1.11 Mouse [Microsoft Microsoft® 2.4GHz Transceiver V1.0]
- <6>[ 3.197204] msm_ehci_host msm_ehci_host.0: EHCI USB in low power mode
- <5>[ 3.660430] scsi 0:0:0:0: Direct-Access PNY USB 2.0 FD 1100 PQ: 0 ANSI: 4
- <5>[ 3.661682] sd 0:0:0:0: Attached scsi generic sg0 type 0
- <5>[ 3.662384] sd 0:0:0:0: [sda] 15950592 512-byte logical blocks: (8.16 GB/7.60 GiB)
- <5>[ 3.662994] sd 0:0:0:0: [sda] Write Protect is off
- <7>[ 3.663024] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00
- <3>[ 3.663635] sd 0:0:0:0: [sda] No Caching mode page present
- <3>[ 3.663635] sd 0:0:0:0: [sda] Assuming drive cache: write through
- <3>[ 3.666748] sd 0:0:0:0: [sda] No Caching mode page present
- <3>[ 3.666748] sd 0:0:0:0: [sda] Assuming drive cache: write through
- <6>[ 3.667663] sda: sda1
- <3>[ 3.670013] sd 0:0:0:0: [sda] No Caching mode page present
- <3>[ 3.670013] sd 0:0:0:0: [sda] Assuming drive cache: write through
- <5>[ 3.670013] sd 0:0:0:0: [sda] Attached SCSI removable disk
- <6>[ 4.046752] msm_ehci_host msm_ehci_host.1: EHCI USB in low power mode
- <6>[ 5.357391] msm_fb_blank_sub mode=0
- <6>[ 5.357391] mdp4_dtv_on: Turn off TG!
- <6>[ 5.406311] mdp4_overlay_mdp_perf_upd mdp clk is changed [1] from 0 to 266667000
- <6>[ 5.406768] mdp4_dtv_csc_init use_csc_limited: 1 quant: 0
- <6>[ 5.408996] mdp4_dtv_start: <ID=15 1920x1080 (88,44,148), (4,5,36) 148MHz>
- <6>[ 5.411529] dtv_on: tv_src_clk=148500kHz, pm_qos_rate=148500kHz, [0]
- <6>[ 5.412078] hdmi_common_get_video_format_from_drv_data: selecting resolution from best format 16
- <6>[ 5.412078] hdmi_msm_power_on_sub HDMI cable connected (1920x1080, 148500000)
- <6>[ 5.412078] hdmi_msm_turn_on force=1
- <6>[ 5.412109] mdp4_dtv_mute en=0
- <3>[ 5.412139] Video format is : 16
- <6>[ 5.412139] hdmi_msm_en_gc_packet: av mute request=0
- <6>[ 5.412170] HDMI Audio: Enabled
- <6>[ 5.412170] hdmi_msm_avi_info_frame: AVI iframe PB3 = 4, PB5 = 0
- <3>[ 5.412872] pil pil0: q6: Failed to locate q6.mdt
- <3>[ 5.412872] APR: Unable to load q6 image, error:-2
- <3>[ 10.406311] apr_tal:open timeout
- <3>[ 10.406311] APR: Unable to open handle
- <3>[ 10.406311] afe_q6_interface_prepare: Unable to register AFE
- <3>[ 10.516296] AFE is already closed
- <6>[ 10.516296] hdmi_msm_turn_on exit
- <6>[ 10.516296] power=ON DVI= OFF
- <6>[ 10.516296] hdmi_msm_hpd_polarity_setup: polarity=0 external_common_state->hpd_state=1
- <6>[ 10.516326] hdmi_msm_hpd_polarity_setup: listen=disconnect, sense=connect, trigger=No, hpd_state 1
- <6>[ 10.516326] mdp4_dtv_on:
- <6>[ 10.527465] msm_fb_blank_sub mode=4
- <6>[ 10.576324] hdmi_msm_power_off: enter
- <6>[ 10.576324] hdmi_msm_en_gc_packet: av mute request=1
- <6>[ 10.609680] mdp4_dtv_mute en=1
- <6>[ 10.609710] hdcp_deauthenticate: HDCP deauthenticate
- <6>[ 10.626403] hdmi_msm_encryt_en: Disable
- <3>[ 10.797119] pil pil0: q6: Failed to locate q6.mdt
- <3>[ 10.797119] APR: Unable to load q6 image, error:-2
- <7>[ 13.316284] eth0: no IPv6 routers present
- <3>[ 15.796295] apr_tal:open timeout
- <3>[ 15.796295] APR: Unable to open handle
- <3>[ 15.796295] afe_q6_interface_prepare: Unable to register AFE
- <3>[ 15.906341] AFE is already closed
- <6>[ 15.906341] HDMI Audio: Disabled
- <6>[ 15.906341] hdmi_msm_hpd_polarity_setup: polarity=0 external_common_state->hpd_state=1
- <6>[ 15.906341] hdmi_msm_hpd_polarity_setup: listen=disconnect, sense=connect, trigger=No, hpd_state 1
- <6>[ 15.906372] hdmi_msm_power_off: exit
- <6>[ 15.906372] dtv_off_sub
- <6>[ 15.911834] mdp4_dtv_off:
- <6>[ 15.911865] msm_fb_blank_sub mode=0
- <6>[ 15.911987] mdp4_dtv_csc_init use_csc_limited: 1 quant: 0
- <6>[ 15.912017] mdp4_dtv_start: <ID=15 1920x1080 (88,44,148), (4,5,36) 148MHz>
- <6>[ 15.916046] dtv_on: tv_src_clk=148500kHz, pm_qos_rate=148500kHz, [0]
- <6>[ 15.916595] hdmi_common_get_video_format_from_drv_data: selecting resolution from best format 16
- <6>[ 15.916595] hdmi_msm_power_on_sub HDMI cable connected (1920x1080, 148500000)
- <6>[ 15.916595] hdmi_msm_turn_on force=1
- <6>[ 15.916595] mdp4_dtv_mute en=0
- <3>[ 15.916656] Video format is : 16
- <6>[ 15.916656] hdmi_msm_en_gc_packet: av mute request=0
- <6>[ 15.916656] HDMI Audio: Enabled
- <6>[ 15.916656] hdmi_msm_avi_info_frame: AVI iframe PB3 = 4, PB5 = 0
- <3>[ 15.917297] pil pil0: q6: Failed to locate q6.mdt
- <3>[ 15.917297] APR: Unable to load q6 image, error:-2
- <3>[ 20.916290] apr_tal:open timeout
- <3>[ 20.916290] APR: Unable to open handle
- <3>[ 20.916290] afe_q6_interface_prepare: Unable to register AFE
- <3>[ 21.026306] AFE is already closed
- <6>[ 21.026306] hdmi_msm_turn_on exit
- <6>[ 21.026306] power=ON DVI= OFF
- <6>[ 21.026306] hdmi_msm_hpd_polarity_setup: polarity=0 external_common_state->hpd_state=1
- <6>[ 21.026306] hdmi_msm_hpd_polarity_setup: listen=disconnect, sense=connect, trigger=No, hpd_state 1
- <6>[ 21.026306] mdp4_dtv_on:
- <6>[ 21.307586] EXT4-fs (mmcblk0p19): recovery complete
- <6>[ 21.308807] EXT4-fs (mmcblk0p19): mounted filesystem with ordered data mode. Opts: barrier=1
- <6>[ 21.526306] hdmi_msm_hdcp_work: Starting HDCP re-authentication-en
- <6>[ 21.526306] hdmi_msm_hdcp_enable
- <6>[ 21.697326] HDCP: AUTH_SUCCESS_INT received
- <6>[ 21.697357] HDCP: authentication part I, successful
- <6>[ 21.698211] HDCP: authentication part II skipped, no repeater
- <6>[ 21.699066] HDCP: authentication part III, successful
- <6>[ 21.699066] hdmi_msm_hdcp_enable HDMI HPD: sense : send HDCP_PASS
- <6>[ 21.699157] hdmi_msm_hdcp_enable: hdmi_audio state switched to 1
- <6>[ 21.699157] mdp4_dtv_mute en=0
- <6>[ 21.715850] hdmi_msm_encryt_en: Enable
- <6>[ 21.715881] mdp4_dtv_mute en=0
- <6>[ 21.715881] hdmi_msm_cache_hdcp_topology: found_repeater = 0, bksv[0]~bksv[4] 153 206 158 7 100
- <6>[ 21.715911] mdp4_dtv_mute en=0
- <6>[ 21.732604] hdmi_msm_encryt_en: Enable
- <6>[ 1232.605804] Physical address does not match
- <4>[ 1408.670715] adbd (180): /proc/180/oom_adj is deprecated, please use /proc/180/oom_score_adj instead.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement