sqeeezy

dmesg_ch_rpi

Dec 21st, 2024
27
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 43.83 KB | None | 0 0
  1. [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd083]
  2. [ 0.000000] Linux version 6.6.64-0-rpi (chimera@chimera) (clang version 19.1.5, LLD 19.1.5) #1 SMP PREEMPT Fri Dec 13 01:07:16 UTC 2024
  3. [ 0.000000] KASLR enabled
  4. [ 0.000000] random: crng init done
  5. [ 0.000000] Machine model: Raspberry Pi 4 Model B Rev 1.4
  6. [ 0.000000] efi: UEFI not found.
  7. [ 0.000000] Reserved memory: created CMA memory pool at 0x000000000c800000, size 512 MiB
  8. [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
  9. [ 0.000000] OF: reserved mem: 0x000000000c800000..0x000000002c7fffff (524288 KiB) map reusable linux,cma
  10. [ 0.000000] OF: reserved mem: 0x000000003ee65e40..0x000000003ee6603f (0 KiB) nomap non-reusable nvram@1
  11. [ 0.000000] OF: reserved mem: 0x000000003ee66080..0x000000003ee660b5 (0 KiB) nomap non-reusable nvram@0
  12. [ 0.000000] Zone ranges:
  13. [ 0.000000] DMA [mem 0x0000000000000000-0x000000003fffffff]
  14. [ 0.000000] DMA32 [mem 0x0000000040000000-0x00000000ffffffff]
  15. [ 0.000000] Normal [mem 0x0000000100000000-0x00000001ffffffff]
  16. [ 0.000000] Movable zone start for each node
  17. [ 0.000000] Early memory node ranges
  18. [ 0.000000] node 0: [mem 0x0000000000000000-0x000000003b2fffff]
  19. [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000fbffffff]
  20. [ 0.000000] node 0: [mem 0x0000000100000000-0x00000001ffffffff]
  21. [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000001ffffffff]
  22. [ 0.000000] On node 0, zone DMA32: 19712 pages in unavailable ranges
  23. [ 0.000000] On node 0, zone Normal: 16384 pages in unavailable ranges
  24. [ 0.000000] percpu: Embedded 52 pages/cpu s89192 r8192 d115608 u212992
  25. [ 0.000000] pcpu-alloc: s89192 r8192 d115608 u212992 alloc=52*4096
  26. [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
  27. [ 0.000000] Detected PIPT I-cache on CPU0
  28. [ 0.000000] CPU features: detected: Spectre-v2
  29. [ 0.000000] CPU features: detected: Spectre-v3a
  30. [ 0.000000] CPU features: detected: Spectre-v4
  31. [ 0.000000] CPU features: detected: Spectre-BHB
  32. [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR
  33. [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI)
  34. [ 0.000000] CPU features: detected: ARM erratum 1742098
  35. [ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
  36. [ 0.000000] alternatives: applying boot alternatives
  37. [ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_headphones=0 cgroup_disable=memory numa_policy=interleave snd_bcm2835.enable_hdmi=0 numa=fake=2 system_heap.max_order=0 smsc95xx.macaddr=DC:A6:32:B1:A7:74 vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 root=LABEL=root ro rootwait console=ttyAMA0,115200 console=tty1 dwc_otg.lpm_enable=0 quiet splash
  38. [ 0.000000] cgroup: Disabling memory control group subsystem
  39. [ 0.000000] Unknown kernel command line parameters "splash numa_policy=interleave numa=fake=2", will be passed to user space.
  40. [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
  41. [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
  42. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2028596
  43. [ 0.000000] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
  44. [ 0.000000] software IO TLB: area num 4.
  45. [ 0.000000] software IO TLB: mapped [mem 0x0000000037300000-0x000000003b300000] (64MB)
  46. [ 0.000000] Memory: 7419988K/8244224K available (16448K kernel code, 3426K rwdata, 9940K rodata, 2176K init, 1100K bss, 299948K reserved, 524288K cma-reserved)
  47. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  48. [ 0.000000] ftrace: allocating 44921 entries in 176 pages
  49. [ 0.000000] ftrace: allocated 176 pages with 3 groups
  50. [ 0.000000] trace event string verifier disabled
  51. [ 0.000000] rcu: Preemptible hierarchical RCU implementation.
  52. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
  53. [ 0.000000] Trampoline variant of Tasks RCU enabled.
  54. [ 0.000000] Rude variant of Tasks RCU enabled.
  55. [ 0.000000] Tracing variant of Tasks RCU enabled.
  56. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
  57. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
  58. [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
  59. [ 0.000000] Root IRQ handler: gic_handle_irq
  60. [ 0.000000] GIC: Using split EOI/Deactivate mode
  61. [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
  62. [ 0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys).
  63. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns
  64. [ 0.000000] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns
  65. [ 0.000206] Console: colour dummy device 80x25
  66. [ 0.000214] printk: console [tty1] enabled
  67. [ 0.000274] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=216000)
  68. [ 0.000282] pid_max: default: 32768 minimum: 301
  69. [ 0.000418] LSM: initializing lsm=capability,landlock,yama,integrity
  70. [ 0.000558] landlock: Up and running.
  71. [ 0.000561] Yama: becoming mindful.
  72. [ 0.000693] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
  73. [ 0.000742] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
  74. [ 0.002211] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
  75. [ 0.002265] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
  76. [ 0.002321] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
  77. [ 0.002475] rcu: Hierarchical SRCU implementation.
  78. [ 0.002478] rcu: Max phase no-delay instances is 1000.
  79. [ 0.003655] EFI services will not be available.
  80. [ 0.004020] smp: Bringing up secondary CPUs ...
  81. [ 0.004446] Detected PIPT I-cache on CPU1
  82. [ 0.004514] CPU1: Booted secondary processor 0x0000000001 [0x410fd083]
  83. [ 0.004960] Detected PIPT I-cache on CPU2
  84. [ 0.004997] CPU2: Booted secondary processor 0x0000000002 [0x410fd083]
  85. [ 0.005410] Detected PIPT I-cache on CPU3
  86. [ 0.005448] CPU3: Booted secondary processor 0x0000000003 [0x410fd083]
  87. [ 0.005491] smp: Brought up 1 node, 4 CPUs
  88. [ 0.005498] SMP: Total of 4 processors activated.
  89. [ 0.005503] CPU features: detected: 32-bit EL0 Support
  90. [ 0.005505] CPU features: detected: 32-bit EL1 Support
  91. [ 0.005509] CPU features: detected: CRC32 instructions
  92. [ 0.005552] CPU features: emulated: Privileged Access Never (PAN) using TTBR0_EL1 switching
  93. [ 0.005556] CPU: All CPU(s) started at EL2
  94. [ 0.005565] alternatives: applying system-wide alternatives
  95. [ 0.008094] devtmpfs: initialized
  96. [ 0.013883] Enabled cp15_barrier support
  97. [ 0.013902] Enabled setend support
  98. [ 0.014016] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  99. [ 0.014052] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
  100. [ 0.027117] pinctrl core: initialized pinctrl subsystem
  101. [ 0.027511] DMI not present or invalid.
  102. [ 0.027957] NET: Registered PF_NETLINK/PF_ROUTE protocol family
  103. [ 0.029351] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
  104. [ 0.029808] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
  105. [ 0.030723] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
  106. [ 0.030772] audit: initializing netlink subsys (disabled)
  107. [ 0.030896] audit: type=2000 audit(0.028:1): state=initialized audit_enabled=0 res=1
  108. [ 0.031242] thermal_sys: Registered thermal governor 'fair_share'
  109. [ 0.031245] thermal_sys: Registered thermal governor 'bang_bang'
  110. [ 0.031249] thermal_sys: Registered thermal governor 'step_wise'
  111. [ 0.031251] thermal_sys: Registered thermal governor 'user_space'
  112. [ 0.031278] cpuidle: using governor ladder
  113. [ 0.031289] cpuidle: using governor menu
  114. [ 0.031470] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  115. [ 0.031529] ASID allocator initialised with 32768 entries
  116. [ 0.032142] Serial: AMBA PL011 UART driver
  117. [ 0.034995] bcm2835-mbox fe00b880.mailbox: mailbox enabled
  118. [ 0.045071] raspberrypi-firmware soc:firmware: Attached to firmware from 2024-12-05T11:45:37, variant start
  119. [ 0.049067] raspberrypi-firmware soc:firmware: Firmware hash is 03554ca336a03ace164f36755144e0d8c060062d
  120. [ 0.056309] Modules: 2G module region forced by RANDOMIZE_MODULE_REGION_FULL
  121. [ 0.056317] Modules: 0 pages in range for non-PLT usage
  122. [ 0.056320] Modules: 515952 pages in range for PLT usage
  123. [ 0.057143] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
  124. [ 0.057150] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page
  125. [ 0.057154] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages
  126. [ 0.057156] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page
  127. [ 0.057160] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
  128. [ 0.057163] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page
  129. [ 0.057166] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages
  130. [ 0.057169] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page
  131. [ 0.058579] bcm2835-dma fe007000.dma-controller: DMA legacy API manager, dmachans=0x1
  132. [ 0.059813] iommu: Default domain type: Translated
  133. [ 0.059828] iommu: DMA domain TLB invalidation policy: strict mode
  134. [ 0.060680] SCSI subsystem initialized
  135. [ 0.060880] libata version 3.00 loaded.
  136. [ 0.060989] usbcore: registered new interface driver usbfs
  137. [ 0.061015] usbcore: registered new interface driver hub
  138. [ 0.061041] usbcore: registered new device driver usb
  139. [ 0.061222] pps_core: LinuxPPS API ver. 1 registered
  140. [ 0.061226] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  141. [ 0.061236] PTP clock support registered
  142. [ 0.061418] EDAC MC: Ver: 3.0.0
  143. [ 0.062296] NetLabel: Initializing
  144. [ 0.062303] NetLabel: domain hash size = 128
  145. [ 0.062306] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
  146. [ 0.062338] NetLabel: unlabeled traffic allowed by default
  147. [ 0.062490] mctp: management component transport protocol core
  148. [ 0.062495] NET: Registered PF_MCTP protocol family
  149. [ 0.062829] clocksource: Switched to clocksource arch_sys_counter
  150. [ 0.073375] VFS: Disk quotas dquot_6.6.0
  151. [ 0.073416] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  152. [ 0.077994] NET: Registered PF_INET protocol family
  153. [ 0.078443] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
  154. [ 0.081477] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
  155. [ 0.081714] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
  156. [ 0.081915] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
  157. [ 0.082857] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
  158. [ 0.085249] TCP: Hash tables configured (established 65536 bind 65536)
  159. [ 0.085604] MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, linear)
  160. [ 0.085944] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
  161. [ 0.086045] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
  162. [ 0.086255] NET: Registered PF_UNIX/PF_LOCAL protocol family
  163. [ 0.086308] NET: Registered PF_XDP protocol family
  164. [ 0.086322] PCI: CLS 0 bytes, default 64
  165. [ 0.086587] Trying to unpack rootfs image as initramfs...
  166. [ 0.090987] kvm [1]: IPA Size Limit: 44 bits
  167. [ 0.092219] kvm [1]: vgic interrupt IRQ9
  168. [ 0.092272] kvm [1]: Hyp mode initialized successfully
  169. [ 0.093340] Initialise system trusted keyrings
  170. [ 0.093601] workingset: timestamp_bits=46 max_order=21 bucket_order=0
  171. [ 0.093667] zbud: loaded
  172. [ 0.094447] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  173. [ 0.094629] fuse: init (API version 7.39)
  174. [ 0.106070] Key type asymmetric registered
  175. [ 0.106090] Asymmetric key parser 'x509' registered
  176. [ 0.106192] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242)
  177. [ 0.106448] io scheduler mq-deadline registered
  178. [ 0.106456] io scheduler kyber registered
  179. [ 0.106534] io scheduler bfq registered
  180. [ 0.107137] irq_brcmstb_l2: registered L2 intc (/soc/interrupt-controller@7ef00100, parent irq: 23)
  181. [ 0.108615] pinctrl-bcm2835 fe200000.gpio: GPIO_OUT persistence: yes
  182. [ 0.110457] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges:
  183. [ 0.110481] brcm-pcie fd500000.pcie: No bus range found for /scb/pcie@7d500000, using [bus 00-ff]
  184. [ 0.110501] brcm-pcie fd500000.pcie: MEM 0x0600000000..0x067fffffff -> 0x0080000000
  185. [ 0.110518] brcm-pcie fd500000.pcie: IB MEM 0x0000000000..0x00bfffffff -> 0x0400000000
  186. [ 0.111496] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00
  187. [ 0.111515] pci_bus 0000:00: root bus resource [bus 00-ff]
  188. [ 0.111523] pci_bus 0000:00: root bus resource [mem 0x600000000-0x67fffffff] (bus address [0x80000000-0xffffffff])
  189. [ 0.111552] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400
  190. [ 0.111604] pci 0000:00:00.0: PME# supported from D0 D3hot
  191. [ 0.113028] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
  192. [ 0.113165] pci_bus 0000:01: supply vpcie3v3 not found, using dummy regulator
  193. [ 0.113266] pci_bus 0000:01: supply vpcie3v3aux not found, using dummy regulator
  194. [ 0.113314] pci_bus 0000:01: supply vpcie12v not found, using dummy regulator
  195. [ 0.220963] brcm-pcie fd500000.pcie: link up, 5.0 GT/s PCIe x1 (SSC)
  196. [ 0.221037] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330
  197. [ 0.221063] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
  198. [ 0.221167] pci 0000:01:00.0: PME# supported from D0 D3hot
  199. [ 0.230939] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
  200. [ 0.230986] pci 0000:00:00.0: BAR 14: assigned [mem 0x600000000-0x6000fffff]
  201. [ 0.230996] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit]
  202. [ 0.231011] pci 0000:00:00.0: PCI bridge to [bus 01]
  203. [ 0.231017] pci 0000:00:00.0: bridge window [mem 0x600000000-0x6000fffff]
  204. [ 0.231237] pcieport 0000:00:00.0: enabling device (0000 -> 0002)
  205. [ 0.231361] pcieport 0000:00:00.0: PME: Signaling with IRQ 27
  206. [ 0.231674] pcieport 0000:00:00.0: AER: enabled with IRQ 27
  207. [ 0.232349] simple-framebuffer 3e432000.framebuffer: framebuffer at 0x3e432000, 0x6c4800 bytes
  208. [ 0.232369] simple-framebuffer 3e432000.framebuffer: format=a8r8g8b8, mode=1680x1050x32, linelength=6720
  209. [ 0.232764] Console: switching to colour frame buffer device 210x65
  210. [ 0.236385] simple-framebuffer 3e432000.framebuffer: fb0: simplefb registered!
  211. [ 0.241031] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled
  212. [ 0.242655] iproc-rng200 fe104000.rng: hwrng registered
  213. [ 0.242908] vc-mem: phys_addr:0x00000000 mem_base=0x3eb00000 mem_size:0x3ff00000(1023 MiB)
  214. [ 0.249579] loop: module loaded
  215. [ 0.252340] tun: Universal TUN/TAP device driver, 1.6
  216. [ 0.252923] bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000
  217. [ 1.054748] Freeing initrd memory: 39596K
  218. [ 1.210870] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus
  219. [ 1.211634] PPP generic driver version 2.4.2
  220. [ 1.211851] usbcore: registered new interface driver lan78xx
  221. [ 1.211868] usbcore: registered new interface driver smsc95xx
  222. [ 1.211987] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
  223. [ 1.212049] dwc_otg: FIQ enabled
  224. [ 1.212052] dwc_otg: NAK holdoff enabled
  225. [ 1.212054] dwc_otg: FIQ split-transaction FSM enabled
  226. [ 1.212058] Module dwc_common_port init
  227. [ 1.212379] mousedev: PS/2 mouse device common for all mice
  228. [ 1.212632] i2c_dev: i2c /dev entries driver
  229. [ 1.213567] device-mapper: uevent: version 1.0.3
  230. [ 1.213694] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com
  231. [ 1.215020] sdhci: Secure Digital Host Controller Interface driver
  232. [ 1.215028] sdhci: Copyright(c) Pierre Ossman
  233. [ 1.215135] sdhci-pltfm: SDHCI platform and OF driver helper
  234. [ 1.218477] ledtrig-cpu: registered to indicate activity on CPUs
  235. [ 1.218682] hid: raw HID events driver (C) Jiri Kosina
  236. [ 1.223001] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
  237. [ 1.226889] watchdog: Delayed init of the lockup detector failed: -19
  238. [ 1.226907] watchdog: Hard watchdog permanently disabled
  239. [ 1.247452] NET: Registered PF_INET6 protocol family
  240. [ 1.258352] Segment Routing with IPv6
  241. [ 1.258365] RPL Segment Routing with IPv6
  242. [ 1.258401] In-situ OAM (IOAM) with IPv6
  243. [ 1.258466] NET: Registered PF_PACKET protocol family
  244. [ 1.271901] registered taskstats version 1
  245. [ 1.272204] Loading compiled-in X.509 certificates
  246. [ 1.283120] Key type .fscrypt registered
  247. [ 1.283135] Key type fscrypt-provisioning registered
  248. [ 1.288437] Key type encrypted registered
  249. [ 1.292489] uart-pl011 fe201000.serial: there is not valid maps for state default
  250. [ 1.292708] uart-pl011 fe201000.serial: cts_event_workaround enabled
  251. [ 1.292922] fe201000.serial: ttyAMA1 at MMIO 0xfe201000 (irq = 35, base_baud = 0) is a PL011 rev2
  252. [ 1.293057] serial serial0: tty port ttyAMA1 registered
  253. [ 1.293864] bcm2835-aux-uart fe215040.serial: there is not valid maps for state default
  254. [ 1.294412] fe215040.serial: ttyS0 at MMIO 0xfe215040 (irq = 36, base_baud = 62500000) is a 16550
  255. [ 1.295056] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
  256. [ 1.295199] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
  257. [ 1.295628] mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0
  258. [ 1.295636] mmc-bcm2835 fe300000.mmcnr: DMA channel allocated
  259. [ 1.324311] of_cfs_init
  260. [ 1.324387] of_cfs_init: OK
  261. [ 1.324564] clk: Disabling unused clocks
  262. [ 1.329029] mmc1: Controller never released inhibit bit(s).
  263. [ 1.369365] mmc0: SDHCI controller on fe340000.mmc [fe340000.mmc] using ADMA
  264. [ 1.374590] Freeing unused kernel memory: 2176K
  265. [ 1.408939] mmc1: new high speed SDIO card at address 0001
  266. [ 1.433212] Checked W+X mappings: passed, no W+X pages found
  267. [ 1.433249] Run /init as init process
  268. [ 1.433253] with arguments:
  269. [ 1.433258] /init
  270. [ 1.433261] splash
  271. [ 1.433264] with environment:
  272. [ 1.433267] HOME=/
  273. [ 1.433270] TERM=linux
  274. [ 1.433273] numa_policy=interleave
  275. [ 1.433276] numa=fake=2
  276. [ 1.724723] brcmstb-i2c fef04500.i2c: @97500hz registered in polling mode
  277. [ 1.725163] brcmstb-i2c fef09500.i2c: @97500hz registered in polling mode
  278. [ 1.744068] xhci_hcd 0000:01:00.0: xHCI Host Controller
  279. [ 1.744125] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
  280. [ 1.746685] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0300240000000890
  281. [ 1.747293] xhci_hcd 0000:01:00.0: xHCI Host Controller
  282. [ 1.747307] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
  283. [ 1.747320] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed
  284. [ 1.747470] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06
  285. [ 1.747477] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  286. [ 1.747481] usb usb1: Product: xHCI Host Controller
  287. [ 1.747485] usb usb1: Manufacturer: Linux 6.6.64-0-rpi xhci-hcd
  288. [ 1.747489] usb usb1: SerialNumber: 0000:01:00.0
  289. [ 1.750646] hub 1-0:1.0: USB hub found
  290. [ 1.750810] hub 1-0:1.0: 1 port detected
  291. [ 1.751846] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.06
  292. [ 1.751864] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  293. [ 1.751870] usb usb2: Product: xHCI Host Controller
  294. [ 1.751874] usb usb2: Manufacturer: Linux 6.6.64-0-rpi xhci-hcd
  295. [ 1.751878] usb usb2: SerialNumber: 0000:01:00.0
  296. [ 1.753067] hub 2-0:1.0: USB hub found
  297. [ 1.753464] hub 2-0:1.0: 4 ports detected
  298. [ 1.768553] dwc2 fe980000.usb: supply vusb_d not found, using dummy regulator
  299. [ 1.768736] dwc2 fe980000.usb: supply vusb_a not found, using dummy regulator
  300. [ 1.974873] dwc2 fe980000.usb: EPs: 8, dedicated fifos, 4080 entries in SPRAM
  301. [ 1.975064] dwc2 fe980000.usb: DWC OTG Controller
  302. [ 1.975079] dwc2 fe980000.usb: new USB bus registered, assigned bus number 3
  303. [ 1.975096] dwc2 fe980000.usb: irq 41, io mem 0xfe980000
  304. [ 1.975223] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06
  305. [ 1.975230] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  306. [ 1.975235] usb usb3: Product: DWC OTG Controller
  307. [ 1.975239] usb usb3: Manufacturer: Linux 6.6.64-0-rpi dwc2_hsotg
  308. [ 1.975243] usb usb3: SerialNumber: fe980000.usb
  309. [ 1.975608] hub 3-0:1.0: USB hub found
  310. [ 1.975638] hub 3-0:1.0: 1 port detected
  311. [ 2.006950] usb 1-1: new high-speed USB device number 2 using xhci_hcd
  312. [ 2.157486] usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.21
  313. [ 2.157501] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
  314. [ 2.157506] usb 1-1: Product: USB2.0 Hub
  315. [ 2.159218] hub 1-1:1.0: USB hub found
  316. [ 2.159508] hub 1-1:1.0: 4 ports detected
  317. [ 2.283186] usb 2-2: new SuperSpeed USB device number 2 using xhci_hcd
  318. [ 2.304330] usb 2-2: New USB device found, idVendor=14b0, idProduct=0207, bcdDevice= 1.00
  319. [ 2.304337] usb 2-2: New USB device strings: Mfr=2, Product=3, SerialNumber=1
  320. [ 2.304341] usb 2-2: Product: S101 250GB
  321. [ 2.304345] usb 2-2: Manufacturer: Fanxiang
  322. [ 2.304349] usb 2-2: SerialNumber: 123456994CBF
  323. [ 2.312263] usbcore: registered new interface driver usb-storage
  324. [ 2.332085] scsi host0: uas
  325. [ 2.332456] usbcore: registered new interface driver uas
  326. [ 2.333580] scsi 0:0:0:0: Direct-Access Fanxiang S101 250GB 0 PQ: 0 ANSI: 6
  327. [ 2.336199] sd 0:0:0:0: Attached scsi generic sg0 type 0
  328. [ 2.336917] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
  329. [ 2.337080] sd 0:0:0:0: [sda] Write Protect is off
  330. [ 2.337088] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00
  331. [ 2.337287] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  332. [ 2.387295] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes
  333. [ 2.387313] sd 0:0:0:0: [sda] Optimal transfer size 33553920 bytes
  334. [ 2.389186] sda: sda1 sda2
  335. [ 2.389467] sd 0:0:0:0: [sda] Attached SCSI disk
  336. [ 2.454846] usb 1-1.3: new low-speed USB device number 3 using xhci_hcd
  337. [ 2.564304] usb 1-1.3: New USB device found, idVendor=045e, idProduct=0040, bcdDevice= 3.00
  338. [ 2.564314] usb 1-1.3: New USB device strings: Mfr=1, Product=3, SerialNumber=0
  339. [ 2.564319] usb 1-1.3: Product: Microsoft 3-Button Mouse with IntelliEye(TM)
  340. [ 2.564324] usb 1-1.3: Manufacturer: Microsoft
  341. [ 2.578642] usbcore: registered new interface driver usbhid
  342. [ 2.578657] usbhid: USB HID core driver
  343. [ 2.583937] input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.0/0003:045E:0040.0001/input/input0
  344. [ 2.584253] hid-generic 0003:045E:0040.0001: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:01:00.0-1.3/input0
  345. [ 2.646845] usb 1-1.4: new low-speed USB device number 4 using xhci_hcd
  346. [ 2.756581] usb 1-1.4: New USB device found, idVendor=046d, idProduct=c31c, bcdDevice=49.00
  347. [ 2.756589] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  348. [ 2.756594] usb 1-1.4: Product: USB Keyboard
  349. [ 2.756598] usb 1-1.4: Manufacturer: Logitech
  350. [ 2.767385] input: Logitech USB Keyboard as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.4/1-1.4:1.0/0003:046D:C31C.0002/input/input1
  351. [ 2.827056] hid-generic 0003:046D:C31C.0002: input,hidraw1: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:01:00.0-1.4/input0
  352. [ 2.831884] input: Logitech USB Keyboard as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.4/1-1.4:1.1/0003:046D:C31C.0003/input/input2
  353. [ 2.891026] hid-generic 0003:046D:C31C.0003: input,hidraw2: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:01:00.0-1.4/input1
  354. [ 3.070794] EXT4-fs (sda2): mounted filesystem c69b31c3-508e-4e8b-940e-b4a98f4e8b3e ro without journal. Quota mode: none.
  355. [ 3.294873] EXT4-fs (sda2): re-mounted c69b31c3-508e-4e8b-940e-b4a98f4e8b3e ro. Quota mode: none.
  356. [ 3.382669] NET: Registered PF_VSOCK protocol family
  357. [ 3.470858] raid6: neonx8 gen() 5371 MB/s
  358. [ 3.538852] raid6: neonx4 gen() 5436 MB/s
  359. [ 3.606838] raid6: neonx2 gen() 4754 MB/s
  360. [ 3.674846] raid6: neonx1 gen() 3441 MB/s
  361. [ 3.742839] raid6: int64x8 gen() 2643 MB/s
  362. [ 3.810832] raid6: int64x4 gen() 3196 MB/s
  363. [ 3.878839] raid6: int64x2 gen() 2802 MB/s
  364. [ 3.946845] raid6: int64x1 gen() 2393 MB/s
  365. [ 3.946850] raid6: using algorithm neonx4 gen() 5436 MB/s
  366. [ 4.014837] raid6: .... xor() 3891 MB/s, rmw enabled
  367. [ 4.014842] raid6: using neon recovery algorithm
  368. [ 4.017012] xor: measuring software checksum speed
  369. [ 4.017350] 8regs : 10053 MB/sec
  370. [ 4.017680] 32regs : 10114 MB/sec
  371. [ 4.018156] arm64_neon : 6940 MB/sec
  372. [ 4.018159] xor: using function: 32regs (10114 MB/sec)
  373. [ 4.084614] Btrfs loaded, zoned=yes, fsverity=no
  374. [ 4.115436] Bluetooth: Core ver 2.22
  375. [ 4.115517] NET: Registered PF_BLUETOOTH protocol family
  376. [ 4.115521] Bluetooth: HCI device and connection manager initialized
  377. [ 4.115535] Bluetooth: HCI socket layer initialized
  378. [ 4.115541] Bluetooth: L2CAP socket layer initialized
  379. [ 4.115552] Bluetooth: SCO socket layer initialized
  380. [ 4.147672] VFIO - User Level meta-driver version: 0.3
  381. [ 4.531051] EXT4-fs (sda2): re-mounted c69b31c3-508e-4e8b-940e-b4a98f4e8b3e r/w. Quota mode: none.
  382. [ 4.570897] bcmgenet fd580000.ethernet end0: renamed from eth0
  383. [ 4.575559] mc: Linux media interface: v0.10
  384. [ 4.581878] rpi-gpiomem fe200000.gpiomem: window base 0xfe200000 size 0x00001000
  385. [ 4.582475] rpi-gpiomem fe200000.gpiomem: initialised 1 regions as /dev/gpiomem
  386. [ 4.618864] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned.
  387. [ 4.633254] videodev: Linux video capture interface: v2.00
  388. [ 4.643210] bcm2835_vc_sm_cma_probe: Videocore shared memory driver
  389. [ 4.643233] [vc_sm_connected_init]: start
  390. [ 4.671352] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
  391. [ 4.677776] [vc_sm_connected_init]: installed successfully
  392. [ 4.679870] rpivid_hevc: module is from the staging directory, the quality is unknown, you have been warned.
  393. [ 4.684165] rpivid feb10000.codec: Device registered as /dev/video19
  394. [ 4.698216] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
  395. [ 4.710045] bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned.
  396. [ 4.712692] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned.
  397. [ 4.726304] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned.
  398. [ 4.760049] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video13
  399. [ 4.770139] bcm2835-codec bcm2835-codec: Device registered as /dev/video10
  400. [ 4.770176] bcm2835-codec bcm2835-codec: Loaded V4L2 decode
  401. [ 4.786977] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video14
  402. [ 4.787335] bcm2835-codec bcm2835-codec: Device registered as /dev/video11
  403. [ 4.787364] bcm2835-codec bcm2835-codec: Loaded V4L2 encode
  404. [ 4.789951] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video15
  405. [ 4.799436] bcm2835-codec bcm2835-codec: Device registered as /dev/video12
  406. [ 4.799472] bcm2835-codec bcm2835-codec: Loaded V4L2 isp
  407. [ 4.805457] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video16
  408. [ 4.805482] bcm2835-isp bcm2835-isp: Register output node 0 with media controller
  409. [ 4.805494] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller
  410. [ 4.805499] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller
  411. [ 4.805509] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller
  412. [ 4.806900] bcm2835-codec bcm2835-codec: Device registered as /dev/video18
  413. [ 4.806943] bcm2835-codec bcm2835-codec: Loaded V4L2 image_fx
  414. [ 4.808884] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video20
  415. [ 4.816992] bcm2835-codec bcm2835-codec: Device registered as /dev/video31
  416. [ 4.817027] bcm2835-codec bcm2835-codec: Loaded V4L2 encode_image
  417. [ 4.817846] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video21
  418. [ 4.819133] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video22
  419. [ 4.822915] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video23
  420. [ 4.822941] bcm2835-isp bcm2835-isp: Register output node 0 with media controller
  421. [ 4.822953] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller
  422. [ 4.822958] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller
  423. [ 4.822963] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller
  424. [ 4.825827] Bluetooth: HCI UART driver ver 2.3
  425. [ 4.825855] Bluetooth: HCI UART protocol H4 registered
  426. [ 4.825858] Bluetooth: HCI UART protocol BCSP registered
  427. [ 4.825973] Bluetooth: HCI UART protocol LL registered
  428. [ 4.825978] Bluetooth: HCI UART protocol ATH3K registered
  429. [ 4.826022] Bluetooth: HCI UART protocol Three-wire (H5) registered
  430. [ 4.826203] Bluetooth: HCI UART protocol Intel registered
  431. [ 4.827876] hci_uart_bcm serial0-0: supply vbat not found, using dummy regulator
  432. [ 4.828089] hci_uart_bcm serial0-0: supply vddio not found, using dummy regulator
  433. [ 4.830018] bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp
  434. [ 4.830048] Bluetooth: HCI UART protocol Broadcom registered
  435. [ 4.831286] Bluetooth: HCI UART protocol QCA registered
  436. [ 4.831303] Bluetooth: HCI UART protocol AG6XX registered
  437. [ 4.831346] Bluetooth: HCI UART protocol Marvell registered
  438. [ 4.854819] Console: switching to colour dummy device 80x25
  439. [ 4.889981] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops [vc4])
  440. [ 4.895063] Registered IR keymap rc-cec
  441. [ 4.897892] rc rc0: vc4-hdmi-0 as /devices/platform/soc/fef00700.hdmi/rc/rc0
  442. [ 4.898059] input: vc4-hdmi-0 as /devices/platform/soc/fef00700.hdmi/rc/rc0/input3
  443. [ 4.947182] uart-pl011 fe201000.serial: no DMA platform data
  444. [ 4.987010] cfg80211: Loading compiled-in X.509 certificates for regulatory database
  445. [ 4.998300] Loaded X.509 cert 'benh@debian.org: 577e021cb980e0e820821ba7b54b4961b8b4fadf'
  446. [ 4.998786] Loaded X.509 cert 'romain.perier@gmail.com: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328'
  447. [ 4.999241] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
  448. [ 4.999700] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
  449. [ 5.002701] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
  450. [ 5.002725] cfg80211: failed to load regulatory.db
  451. [ 5.011352] input: vc4-hdmi-0 HDMI Jack as /devices/platform/soc/fef00700.hdmi/sound/card0/input4
  452. [ 5.011985] vc4-drm gpu: bound fef00700.hdmi (ops vc4_hdmi_ops [vc4])
  453. [ 5.017934] Registered IR keymap rc-cec
  454. [ 5.018174] rc rc1: vc4-hdmi-1 as /devices/platform/soc/fef05700.hdmi/rc/rc1
  455. [ 5.018341] input: vc4-hdmi-1 as /devices/platform/soc/fef05700.hdmi/rc/rc1/input5
  456. [ 5.030444] input: vc4-hdmi-1 HDMI Jack as /devices/platform/soc/fef05700.hdmi/sound/card1/input6
  457. [ 5.031378] vc4-drm gpu: bound fef05700.hdmi (ops vc4_hdmi_ops [vc4])
  458. [ 5.031745] vc4-drm gpu: bound fe004000.txp (ops vc4_txp_ops [vc4])
  459. [ 5.031952] vc4-drm gpu: bound fe206000.pixelvalve (ops vc4_crtc_ops [vc4])
  460. [ 5.032558] vc4-drm gpu: bound fe207000.pixelvalve (ops vc4_crtc_ops [vc4])
  461. [ 5.032811] vc4-drm gpu: bound fe20a000.pixelvalve (ops vc4_crtc_ops [vc4])
  462. [ 5.032939] vc4-drm gpu: bound fe216000.pixelvalve (ops vc4_crtc_ops [vc4])
  463. [ 5.033108] vc4-drm gpu: bound fec12000.pixelvalve (ops vc4_crtc_ops [vc4])
  464. [ 5.041370] [drm] Initialized vc4 0.0.0 20140616 for gpu on minor 0
  465. [ 5.113912] Console: switching to colour frame buffer device 210x65
  466. [ 5.126710] vc4-drm gpu: [drm] fb0: vc4drmfb frame buffer device
  467. [ 5.153533] [drm] Initialized v3d 1.0.0 20180419 for fec00000.v3d on minor 1
  468. [ 5.163332] brcmfmac: F1 signature read @0x18000000=0x15264345
  469. [ 5.166755] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
  470. [ 5.170082] usbcore: registered new interface driver brcmfmac
  471. [ 5.187406] Bluetooth: hci0: BCM: chip id 107
  472. [ 5.188041] Bluetooth: hci0: BCM: features 0x2f
  473. [ 5.189112] Bluetooth: hci0: BCM4345C0
  474. [ 5.189129] Bluetooth: hci0: BCM4345C0 (003.001.025) build 0000
  475. [ 5.190859] Bluetooth: hci0: BCM4345C0 'brcm/BCM4345C0.raspberrypi,4-model-b.hcd' Patch
  476. [ 5.440550] brcmfmac: brcmf_c_process_txcap_blob: no txcap_blob available (err=-2)
  477. [ 5.440960] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Nov 1 2021 00:37:25 version 7.45.241 (1a2f2fa CY) FWID 01-703fd60
  478. [ 5.697783] 8021q: 802.1Q VLAN Support v1.8
  479. [ 5.756758] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  480. [ 5.756777] Bluetooth: BNEP filters: protocol multicast
  481. [ 5.756795] Bluetooth: BNEP socket layer initialized
  482. [ 5.774686] bcmgenet fd580000.ethernet: configuring instance for external RGMII (RX delay)
  483. [ 5.775669] bcmgenet fd580000.ethernet end0: Link is Down
  484. [ 5.806415] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled
  485. [ 5.943528] Bluetooth: hci0: BCM: features 0x2f
  486. [ 5.944804] Bluetooth: hci0: BCM43455 37.4MHz Raspberry Pi 3+-0190
  487. [ 5.944810] Bluetooth: hci0: BCM4345C0 (003.001.025) build 0382
  488. [ 5.962233] Bluetooth: MGMT ver 1.22
  489. [ 5.967075] NET: Registered PF_ALG protocol family
  490. [ 7.811106] bcmgenet fd580000.ethernet end0: Link is Up - 100Mbps/Full - flow control rx/tx
  491. [ 14.450899] Bluetooth: RFCOMM TTY layer initialized
  492. [ 14.450938] Bluetooth: RFCOMM socket layer initialized
  493. [ 14.450961] Bluetooth: RFCOMM ver 1.11
  494. [ 37.972741] firefox[706]: memfd_create() called without MFD_EXEC or MFD_NOEXEC_SEAL set
  495. [ 42.044478] vc4-drm gpu: swiotlb buffer is full (sz: 2101248 bytes), total 32768 (slots), used 5 (slots)
  496. [ 60.766206] vc4-drm gpu: swiotlb buffer is full (sz: 6942720 bytes), total 32768 (slots), used 5 (slots)
  497. [ 61.229952] vc4-drm gpu: swiotlb buffer is full (sz: 290816 bytes), total 32768 (slots), used 3 (slots)
  498. [ 61.604000] vc4-drm gpu: swiotlb buffer is full (sz: 729088 bytes), total 32768 (slots), used 3 (slots)
  499. [ 81.193081] vc4-drm gpu: swiotlb buffer is full (sz: 2097152 bytes), total 32768 (slots), used 1193 (slots)
  500. [ 88.712137] vc4-drm gpu: swiotlb buffer is full (sz: 6946816 bytes), total 32768 (slots), used 3 (slots)
  501. [ 862.328028] vc4-drm gpu: swiotlb buffer is full (sz: 925696 bytes), total 32768 (slots), used 2023 (slots)
  502. [ 863.983001] vc4-drm gpu: swiotlb buffer is full (sz: 720896 bytes), total 32768 (slots), used 1915 (slots)
  503. [ 907.018737] vc4-drm gpu: swiotlb buffer is full (sz: 524288 bytes), total 32768 (slots), used 3075 (slots)
  504. [ 1653.945383] vc4-drm gpu: swiotlb buffer is full (sz: 303104 bytes), total 32768 (slots), used 615 (slots)
  505. [ 1827.243357] vc4-drm gpu: swiotlb buffer is full (sz: 524288 bytes), total 32768 (slots), used 2349 (slots)
  506. [ 1846.823866] vc4-drm gpu: swiotlb buffer is full (sz: 2318336 bytes), total 32768 (slots), used 123 (slots)
  507. [ 1849.881229] vc4-drm gpu: swiotlb buffer is full (sz: 2318336 bytes), total 32768 (slots), used 123 (slots)
  508. [ 1854.710021] vc4-drm gpu: swiotlb buffer is full (sz: 2318336 bytes), total 32768 (slots), used 123 (slots)
  509. [ 1855.072706] vc4-drm gpu: swiotlb buffer is full (sz: 2318336 bytes), total 32768 (slots), used 123 (slots)
  510. [ 1855.121944] vc4-drm gpu: swiotlb buffer is full (sz: 2318336 bytes), total 32768 (slots), used 123 (slots)
  511. [ 1855.170733] vc4-drm gpu: swiotlb buffer is full (sz: 2318336 bytes), total 32768 (slots), used 123 (slots)
  512. [ 1855.207788] vc4-drm gpu: swiotlb buffer is full (sz: 2318336 bytes), total 32768 (slots), used 123 (slots)
  513. [ 1855.377108] vc4-drm gpu: swiotlb buffer is full (sz: 2318336 bytes), total 32768 (slots), used 123 (slots)
  514. [ 1856.129064] vc4-drm gpu: swiotlb buffer is full (sz: 2318336 bytes), total 32768 (slots), used 123 (slots)
  515. [ 1856.339948] vc4-drm gpu: swiotlb buffer is full (sz: 2318336 bytes), total 32768 (slots), used 123 (slots)
  516. [ 1858.113886] vc4-drm gpu: swiotlb buffer is full (sz: 2318336 bytes), total 32768 (slots), used 123 (slots)
  517. [ 1859.514686] vc4-drm gpu: swiotlb buffer is full (sz: 2318336 bytes), total 32768 (slots), used 123 (slots)
  518. [ 1863.021458] vc4-drm gpu: swiotlb buffer is full (sz: 2318336 bytes), total 32768 (slots), used 123 (slots)
  519. [ 1863.073010] vc4-drm gpu: swiotlb buffer is full (sz: 2318336 bytes), total 32768 (slots), used 123 (slots)
  520. [ 1863.115664] vc4-drm gpu: swiotlb buffer is full (sz: 2318336 bytes), total 32768 (slots), used 123 (slots)
  521. [ 1863.168040] vc4-drm gpu: swiotlb buffer is full (sz: 2318336 bytes), total 32768 (slots), used 133 (slots)
  522. [ 1863.218379] vc4-drm gpu: swiotlb buffer is full (sz: 2318336 bytes), total 32768 (slots), used 123 (slots)
  523. [ 1863.274295] vc4-drm gpu: swiotlb buffer is full (sz: 2318336 bytes), total 32768 (slots), used 123 (slots)
  524. [ 1863.324955] vc4-drm gpu: swiotlb buffer is full (sz: 2318336 bytes), total 32768 (slots), used 123 (slots)
  525. [ 1863.377506] vc4-drm gpu: swiotlb buffer is full (sz: 2318336 bytes), total 32768 (slots), used 123 (slots)
  526. [ 1863.439669] vc4-drm gpu: swiotlb buffer is full (sz: 2318336 bytes), total 32768 (slots), used 123 (slots)
  527. [ 1863.509598] vc4-drm gpu: swiotlb buffer is full (sz: 2318336 bytes), total 32768 (slots), used 123 (slots)
  528. [ 1868.049902] swiotlb_tbl_map_single: 108 callbacks suppressed
  529. [ 1868.049924] vc4-drm gpu: swiotlb buffer is full (sz: 2318336 bytes), total 32768 (slots), used 123 (slots)
  530. [ 1868.086146] vc4-drm gpu: swiotlb buffer is full (sz: 2318336 bytes), total 32768 (slots), used 123 (slots)
  531. [ 1868.122110] vc4-drm gpu: swiotlb buffer is full (sz: 2318336 bytes), total 32768 (slots), used 123 (slots)
  532. [ 1868.168321] vc4-drm gpu: swiotlb buffer is full (sz: 2318336 bytes), total 32768 (slots), used 123 (slots)
  533. [ 1868.204681] vc4-drm gpu: swiotlb buffer is full (sz: 2318336 bytes), total 32768 (slots), used 123 (slots)
  534. [ 1868.238825] vc4-drm gpu: swiotlb buffer is full (sz: 2318336 bytes), total 32768 (slots), used 123 (slots)
  535. [ 1868.289010] vc4-drm gpu: swiotlb buffer is full (sz: 2318336 bytes), total 32768 (slots), used 123 (slots)
  536. [ 1868.337821] vc4-drm gpu: swiotlb buffer is full (sz: 2318336 bytes), total 32768 (slots), used 123 (slots)
  537. [ 1868.380960] vc4-drm gpu: swiotlb buffer is full (sz: 2318336 bytes), total 32768 (slots), used 123 (slots)
  538. [ 1868.419458] vc4-drm gpu: swiotlb buffer is full (sz: 2318336 bytes), total 32768 (slots), used 123 (slots)
  539. [ 1873.135580] swiotlb_tbl_map_single: 68 callbacks suppressed
  540. [ 1873.135613] vc4-drm gpu: swiotlb buffer is full (sz: 2318336 bytes), total 32768 (slots), used 123 (slots)
  541. [ 1873.233552] vc4-drm gpu: swiotlb buffer is full (sz: 2318336 bytes), total 32768 (slots), used 123 (slots)
  542. [ 1873.316005] vc4-drm gpu: swiotlb buffer is full (sz: 2318336 bytes), total 32768 (slots), used 123 (slots)
  543. [ 1873.436151] vc4-drm gpu: swiotlb buffer is full (sz: 2318336 bytes), total 32768 (slots), used 123 (slots)
  544. [ 1873.517427] vc4-drm gpu: swiotlb buffer is full (sz: 2318336 bytes), total 32768 (slots), used 123 (slots)
  545. [ 1873.593219] vc4-drm gpu: swiotlb buffer is full (sz: 2318336 bytes), total 32768 (slots), used 123 (slots)
  546. [ 1873.686349] vc4-drm gpu: swiotlb buffer is full (sz: 2318336 bytes), total 32768 (slots), used 123 (slots)
  547. [ 1873.757468] vc4-drm gpu: swiotlb buffer is full (sz: 2318336 bytes), total 32768 (slots), used 123 (slots)
  548. [ 1873.887587] vc4-drm gpu: swiotlb buffer is full (sz: 2318336 bytes), total 32768 (slots), used 123 (slots)
  549. [ 1873.969542] vc4-drm gpu: swiotlb buffer is full (sz: 2318336 bytes), total 32768 (slots), used 123 (slots)
  550. [ 1878.157372] swiotlb_tbl_map_single: 42 callbacks suppressed
  551. [ 1878.157402] vc4-drm gpu: swiotlb buffer is full (sz: 2318336 bytes), total 32768 (slots), used 123 (slots)
  552. [ 1878.240309] vc4-drm gpu: swiotlb buffer is full (sz: 2318336 bytes), total 32768 (slots), used 123 (slots)
  553. [ 1878.314768] vc4-drm gpu: swiotlb buffer is full (sz: 2318336 bytes), total 32768 (slots), used 123 (slots)
  554. [ 1878.410661] vc4-drm gpu: swiotlb buffer is full (sz: 2318336 bytes), total 32768 (slots), used 123 (slots)
  555. [ 1878.502543] vc4-drm gpu: swiotlb buffer is full (sz: 2318336 bytes), total 32768 (slots), used 123 (slots)
  556. [ 1878.580529] vc4-drm gpu: swiotlb buffer is full (sz: 2318336 bytes), total 32768 (slots), used 123 (slots)
  557. [ 1878.674817] vc4-drm gpu: swiotlb buffer is full (sz: 2318336 bytes), total 32768 (slots), used 123 (slots)
  558. [ 1878.747557] vc4-drm gpu: swiotlb buffer is full (sz: 2318336 bytes), total 32768 (slots), used 123 (slots)
  559. [ 1878.825140] vc4-drm gpu: swiotlb buffer is full (sz: 2318336 bytes), total 32768 (slots), used 123 (slots)
  560. [ 1878.913273] vc4-drm gpu: swiotlb buffer is full (sz: 2318336 bytes), total 32768 (slots), used 123 (slots)
  561. [ 1883.161500] swiotlb_tbl_map_single: 48 callbacks suppressed
  562. [ 1883.161522] vc4-drm gpu: swiotlb buffer is full (sz: 2318336 bytes), total 32768 (slots), used 123 (slots)
  563. [ 1883.236079] vc4-drm gpu: swiotlb buffer is full (sz: 2318336 bytes), total 32768 (slots), used 123 (slots)
  564. [ 1883.308704] vc4-drm gpu: swiotlb buffer is full (sz: 2318336 bytes), total 32768 (slots), used 123 (slots)
  565. [ 1883.381720] vc4-drm gpu: swiotlb buffer is full (sz: 2318336 bytes), total 32768 (slots), used 123 (slots)
  566. [ 1883.454848] vc4-drm gpu: swiotlb buffer is full (sz: 2318336 bytes), total 32768 (slots), used 123 (slots)
  567. [ 1883.527734] vc4-drm gpu: swiotlb buffer is full (sz: 2318336 bytes), total 32768 (slots), used 123 (slots)
  568. [ 1883.607350] vc4-drm gpu: swiotlb buffer is full (sz: 2318336 bytes), total 32768 (slots), used 123 (slots)
  569. [ 1883.682199] vc4-drm gpu: swiotlb buffer is full (sz: 2318336 bytes), total 32768 (slots), used 123 (slots)
  570. [ 2812.841676] vc4-drm gpu: swiotlb buffer is full (sz: 2318336 bytes), total 32768 (slots), used 123 (slots)
  571. [ 2813.007529] vc4-drm gpu: swiotlb buffer is full (sz: 2318336 bytes), total 32768 (slots), used 123 (slots)
  572. [ 2813.295751] vc4-drm gpu: swiotlb buffer is full (sz: 2318336 bytes), total 32768 (slots), used 123 (slots)
  573. [ 2813.368829] vc4-drm gpu: swiotlb buffer is full (sz: 2318336 bytes), total 32768 (slots), used 123 (slots)
  574. [ 2813.536032] vc4-drm gpu: swiotlb buffer is full (sz: 2318336 bytes), total 32768 (slots), used 123 (slots)
  575. [ 2814.652868] vc4-drm gpu: swiotlb buffer is full (sz: 2318336 bytes), total 32768 (slots), used 123 (slots)
  576. [ 2814.729833] vc4-drm gpu: swiotlb buffer is full (sz: 2318336 bytes), total 32768 (slots), used 123 (slots)
  577. [ 2814.810227] vc4-drm gpu: swiotlb buffer is full (sz: 2318336 bytes), total 32768 (slots), used 123 (slots)
  578. [ 2814.888759] vc4-drm gpu: swiotlb buffer is full (sz: 2318336 bytes), total 32768 (slots), used 123 (slots)
  579. [ 2814.970534] vc4-drm gpu: swiotlb buffer is full (sz: 2318336 bytes), total 32768 (slots), used 123 (slots)
  580. [ 2817.850122] swiotlb_tbl_map_single: 35 callbacks suppressed
  581. [ 2817.850159] vc4-drm gpu: swiotlb buffer is full (sz: 2318336 bytes), total 32768 (slots), used 123 (slots)
  582. [ 2817.925110] vc4-drm gpu: swiotlb buffer is full (sz: 2318336 bytes), total 32768 (slots), used 123 (slots)
  583. [ 2818.088240] vc4-drm gpu: swiotlb buffer is full (sz: 2318336 bytes), total 32768 (slots), used 123 (slots)
  584. [ 2819.050018] vc4-drm gpu: swiotlb buffer is full (sz: 2318336 bytes), total 32768 (slots), used 123 (slots)
  585. [ 2819.124850] vc4-drm gpu: swiotlb buffer is full (sz: 2318336 bytes), total 32768 (slots), used 123 (slots)
  586.  
Add Comment
Please, Sign In to add comment