Guest User

Untitled

a guest
Aug 26th, 2018
228
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. U-Boot SPL 2018.09-rc1-armbian (Aug 26 2018 - 14:56:34 +0200)
  2. DRAM: 2048 MiB
  3. Trying to boot from MMC1
  4. NOTICE: BL31: v1.5(debug):936c673
  5. NOTICE: BL31: Built : 23:32:36, Aug 25 2018
  6. NOTICE: BL31: Detected Allwinner H6 SoC (1728)
  7. NOTICE: BL31: Detected device tree named sun50i-h6-orangepi-one-plus
  8. INFO: ARM GICv2 driver initialized
  9. WARNING: PMIC: Unknown board, default to AXP805 according to H6 reference design.
  10. NOTICE: PMIC: AXP805 detected
  11. INFO: BL31: Platform setup done
  12. INFO: BL31: Initializing runtime services
  13. INFO: BL31: cortex_a53: CPU workaround for 855873 was applied
  14. INFO: BL31: Preparing for EL3 exit to normal world
  15. INFO: Entry point address = 0x4a000000
  16. INFO: SPSR = 0x3c9
  17.  
  18.  
  19. U-Boot 2018.09-rc1-armbian (Aug 26 2018 - 14:56:34 +0200) Allwinner Technology
  20.  
  21. CPU: Allwinner H6 (SUN50I)
  22. Model: OrangePi One Plus
  23. DRAM: 2 GiB
  24. MMC: SUNXI SD/MMC: 0
  25. Loading Environment from FAT... Unable to use mmc 0:1... Failed (-5)
  26. Using device 'sun50i_dw_hdmi', disp_uc_priv=00000000b9f33320
  27. sunxi_de3_init: device 'sunxi_de3' display won't probe (ret=-1)
  28. Using device 'sun50i_dw_hdmi', disp_uc_priv=00000000b9f33320
  29. sunxi_de3_init: device 'sunxi_de3' display won't probe (ret=-1)
  30. In: serial
  31. Out: serial
  32. Err: serial
  33. Net: No ethernet found.
  34. starting USB...
  35. No controllers found
  36. Hit any key to stop autoboot: 0
  37. switch to partitions #0, OK
  38. mmc0 is current device
  39. Scanning mmc 0:1...
  40. Found U-Boot script /boot/boot.scr
  41. 3090 bytes read in 10 ms (301.8 KiB/s)
  42. ## Executing script at 4fc00000
  43. U-boot loaded from SD
  44. Boot script loaded from mmc
  45. 265 bytes read in 9 ms (28.3 KiB/s)
  46. 13084 bytes read in 26 ms (491.2 KiB/s)
  47. ** File not found /boot/dtb/allwinner/overlay/-fixup.scr **
  48. 5025733 bytes read in 523 ms (9.2 MiB/s)
  49. 13776904 bytes read in 1407 ms (9.3 MiB/s)
  50. ## Loading init Ramdisk from Legacy Image at 4fe00000 ...
  51. Image Name: uInitrd
  52. Image Type: AArch64 Linux RAMDisk Image (gzip compressed)
  53. Data Size: 5025669 Bytes = 4.8 MiB
  54. Load Address: 00000000
  55. Entry Point: 00000000
  56. Verifying Checksum ... OK
  57. ## Flattened Device Tree blob at 4fa00000
  58. Booting using the fdt blob at 0x4fa00000
  59. Loading Ramdisk to 49b35000, end 49ffff85 ... OK
  60. reserving fdt memory region: addr=4fa00000 size=69000
  61. Loading Device Tree to 0000000049ac9000, end 0000000049b34fff ... OK
  62. Setting up simplefb
  63. DE3 present but not probed
  64.  
  65. Starting kernel ...
  66.  
  67. Loading, please wait...
  68. starting version 232
  69. Begin: Loading essential drivers ... done.
  70. Begin: Running /scripts/init-premount ... done.
  71. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
  72. Begin: Running /scripts/local-premount ... Scanning for Btrfs filesystems
  73. done.
  74. Begin: Will now check root file system ... fsck from util-linux 2.29.2
  75. [/sbin/fsck.ext4 (1) -- /dev/mmcblk0p1] fsck.ext4 -a -C0 /dev/mmcblk0p1
  76. /dev/mmcblk0p1: recovering journal
  77. /dev/mmcblk0p1: clean, 36993/885472 files, 317651/3849616 blocks
  78. done.
  79. done.
  80. Begin: Running /scripts/local-bottom ... done.
  81. Begin: Running /scripts/init-bottom ... done.
  82.  
  83. Welcome to Debian GNU/Linux 9 (stretch)!
  84.  
  85. [ OK ] Created slice User and Session Slice.
  86. [ OK ] Listening on Journal Socket.
  87. [ OK ] Created slice System Slice.
  88. Mounting Huge Pages File System...
  89. Starting Set the console keyboard layout...
  90. [ OK ] Reached target Swap.
  91. Starting Restore / save the current clock...
  92. Starting Nameserver information manager...
  93. [ OK ] Listening on udev Kernel Socket.
  94. [ OK ] Set up automount Arbitrary Executab…rmats File System Automount Point.
  95. [ OK ] Listening on /dev/initctl Compatibility Named Pipe.
  96. [ OK ] Created slice system-serial\x2dgetty.slice.
  97. Starting Load Kernel Modules...
  98. [ OK ] Started Dispatch Password Requests to Console Directory Watch.
  99. [ OK ] Listening on Journal Audit Socket.
  100. [ OK ] Listening on udev Control Socket.
  101. Mounting POSIX Message Queue File System...
  102. Mounting Debug File System...
  103. [ OK ] Listening on fsck to fsckd communication Socket.
  104. Starting Remount Root and Kernel File Systems...
  105. Starting Create list of required st…ce nodes for the current kernel...
  106. [ OK ] Started Forward Password Requests to Wall Directory Watch.
  107. [ OK ] Reached target Encrypted Volumes.
  108. [ OK ] Reached target Paths.
  109. [ OK ] Reached target Slices.
  110. [ OK ] Listening on Syslog Socket.
  111. [ OK ] Reached target Remote File Systems.
  112. [ OK ] Listening on Journal Socket (/dev/log).
  113. Starting Journal Service...
  114. [ OK ] Mounted Debug File System.
  115. [ OK ] Mounted Huge Pages File System.
  116. [ OK ] Mounted POSIX Message Queue File System.
  117. [ OK ] Started Load Kernel Modules.
  118. [ OK ] Started Create list of required sta…vice nodes for the current kernel.
  119. Starting Create Static Device Nodes in /dev...
  120. Mounting Configuration File System...
  121. Starting Apply Kernel Variables...
  122. [ OK ] Mounted Configuration File System.
  123. [ OK ] Started Remount Root and Kernel File Systems.
  124. Starting udev Coldplug all Devices...
  125. Starting Load/Save Random Seed...
  126. [ OK ] Started Nameserver information manager.
  127. [ OK ] Started Journal Service.
  128. Starting Flush Journal to Persistent Storage...
  129. [ OK ] Started Apply Kernel Variables.
  130. [ OK ] Started Set the console keyboard layout.
  131. [ OK ] Started Restore / save the current clock.
  132. [ OK ] Started Flush Journal to Persistent Storage.
  133. [ OK ] Started udev Coldplug all Devices.
  134. [ OK ] Started Load/Save Random Seed.
  135. [ OK ] Started Create Static Device Nodes in /dev.
  136. Starting udev Kernel Device Manager...
  137. [ OK ] Reached target Local File Systems (Pre).
  138. Mounting /tmp...
  139. [ OK ] Mounted /tmp.
  140. [ OK ] Reached target Local File Systems.
  141. Starting Armbian ZRAM config...
  142. Starting Set console font and keymap...
  143. Starting Raise network interfaces...
  144. Starting Create Volatile Files and Directories...
  145. [ OK ] Started Set console font and keymap.
  146. [ OK ] Started Create Volatile Files and Directories.
  147. Starting Update UTMP about System Boot/Shutdown...
  148. [ OK ] Reached target System Time Synchronized.
  149. [ OK ] Started Entropy daemon using the HAVEGE algorithm.
  150. [ OK ] Started Update UTMP about System Boot/Shutdown.
  151. [ OK ] Started udev Kernel Device Manager.
  152. [ OK ] Found device /dev/ttyS0.
  153. [ OK ] Started Raise network interfaces.
  154. [ OK ] Started Armbian ZRAM config.
  155. Starting Armbian memory supported logging...
  156. [ OK ] Started Armbian memory supported logging.
  157. [ OK ] Reached target System Initialization.
  158. [ OK ] Listening on D-Bus System Message Bus Socket.
  159. [ OK ] Reached target Sockets.
  160. Starting Armbian hardware monitoring...
  161. [ OK ] Started Daily Cleanup of Temporary Directories.
  162. [ OK ] Started Daily apt download activities.
  163. [ OK ] Started Daily apt upgrade and clean activities.
  164. [ OK ] Reached target Timers.
  165. Starting Armbian hardware optimization...
  166. [ OK ] Started Armbian hardware optimization.
  167. [ OK ] Started Armbian hardware monitoring.
  168. [ OK ] Reached target Basic System.
  169. [ OK ] Started Regular background program processing daemon.
  170. [ OK ] Started Armbian first run tasks.
  171. [ OK ] Created slice system-getty.slice.
  172. Starting System Logging Service...
  173. Starting LSB: Start/stop sysstat's sadc...
  174. Starting Login Service...
  175. [ OK ] Started D-Bus System Message Bus.
  176. Starting LSB: Load kernel modules needed to enable cpufreq scaling...
  177. Starting Network Manager...
  178. [ OK ] Started System Logging Service.
  179. [ OK ] Started LSB: Start/stop sysstat's sadc.
  180. [ OK ] Started Login Service.
  181. [ OK ] Started LSB: Load kernel modules needed to enable cpufreq scaling.
  182. Starting LSB: set CPUFreq kernel parameters...
  183. [ OK ] Started LSB: set CPUFreq kernel parameters.
  184. Starting LSB: Set sysfs variables from /etc/sysfs.conf...
  185. [ OK ] Started LSB: Set sysfs variables from /etc/sysfs.conf.
  186. [ OK ] Started Network Manager.
  187. [ OK ] Reached target Network.
  188. [ OK ] Started Unattended Upgrades Shutdown.
  189. Starting OpenBSD Secure Shell server...
  190. Starting Permit User Sessions...
  191. Starting Network Manager Wait Online...
  192. Starting Network Manager Script Dispatcher Service...
  193. [ OK ] Started Permit User Sessions.
  194. [ OK ] Started Network Manager Script Dispatcher Service.
  195. Starting Hostname Service...
  196. [ OK ] Started Hostname Service.
  197. [ OK ] Started OpenBSD Secure Shell server.
  198. Starting Authorization Manager...
  199. [ OK ] Started Authorization Manager.
  200. Stopping OpenBSD Secure Shell server...
  201. [ OK ] Stopped OpenBSD Secure Shell server.
  202. Starting OpenBSD Secure Shell server...
  203. [ OK ] Started OpenBSD Secure Shell server.
  204. Stopping OpenBSD Secure Shell server...
  205. [ OK ] Stopped OpenBSD Secure Shell server.
  206. Starting OpenBSD Secure Shell server...
  207. [ OK ] Started OpenBSD Secure Shell server.
  208. [ OK ] Started Network Manager Wait Online.
  209. [ OK ] Reached target Network is Online.
  210. Starting LSB: Advanced IEEE 802.11 management daemon...
  211. Starting /etc/rc.local Compatibility...
  212. Starting LSB: Start NTP daemon...
  213. [ OK ] Started LSB: Advanced IEEE 802.11 management daemon.
  214. [ OK ] Started /etc/rc.local Compatibility.
  215. [ OK ] Started Getty on tty1.
  216. [ OK ] Started Serial Getty on ttyS0.
  217. [ OK ] Reached target Login Prompts.
  218. [ OK ] Started LSB: Start NTP daemon.
  219. [ OK ] Reached target Multi-User System.
  220. [ OK ] Reached target Graphical Interface.
  221. Starting Update UTMP about System Runlevel Changes...
  222. [ OK ] Started Update UTMP about System Runlevel Changes.
  223.  
  224. Debian GNU/Linux 9 orangepioneplus ttyS0
  225.  
  226. orangepioneplus login:
RAW Paste Data