Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] Truncating memory at 0xc0000000 to fit in 32-bit physical address space
- [ 0.000000] smem_find(137, 80): wrong size 72
- [ 0.023470] AXI: msm_bus_fabric_init_driver(): msm_bus_fabric_init_driver
- [ 0.055821] msm_rpm_get_status(): Status id 433 not defined for target
- [ 0.055821] msm_rpm_get_status(): Status id 433 not defined for target
- [ 0.055852] msm_rpm_get_status(): Status id 433 not defined for target
- [ 0.055852] msm_rpm_get_status(): Status id 433 not defined for target
- [ 0.055882] msm_rpm_get_status(): Status id 433 not defined for target
- [ 0.055882] msm_rpm_get_status(): Status id 433 not defined for target
- [ 0.055913] msm_rpm_get_status(): Status id 433 not defined for target
- [ 0.055913] msm_rpm_get_status(): Status id 433 not defined for target
- [ 0.076361] msm_gpiomux_install: write failure: -14
- [ 0.076392] msm_gpiomux_install: write failure: -14
- [ 0.076392] msm_gpiomux_install: write failure: -14
- [ 0.076392] msm_gpiomux_install: write failure: -14
- [ 0.129223] [msm8960_init_cam:1572]setting done!!
- [ 0.188127] i2c i2c-14: Invalid 7-bit I2C address 0x00
- [ 0.188249] i2c i2c-14: Can't create device at 0x00
- [ 0.188737] i2c i2c-19: Failed to register i2c client cmc624 at 0x38 (-16)
- [ 0.188829] i2c i2c-19: Can't create device at 0x38
- [ 0.189348] Error-Bad Function Input
- [ 0.190050] max8952 19-0060: DVS modes disabled because VID0 and VID1 do not have proper controls.
- [ 0.360811] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: name: scm_pas
- [ 0.372531] smd_channel_probe_worker: allocation table not initialized
- [ 0.383671] msm_ipc_router_init: Unable to create IPC logging for IPC RTR
- [ 0.384556] msm_ipc_router_ipc_log_init: Unable to create IPC logging for Req/Resp
- [ 0.384861] msm_ipc_router_ipc_log_init: Unable to create IPC logging for Indications
- [ 0.391484] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: name: acpuclk-8960
- [ 0.429391] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: name: dtv
- [ 0.433511] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: name: mdp
- [ 0.447459] pm_runtime: fail to wake up
- [ 0.849015] hdmi_msm hdmi_msm.1: external_common_state_create: sysfs group eeb63208
- [ 0.851030] Inside writeback_driver_init
- [ 0.851609] Inside writeback_probe
- [ 1.300747] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: name: rotator
- [ 1.316893] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: name: grp3d
- [ 1.327819] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: name: grp2d0
- [ 1.338074] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: name: grp2d1
- [ 1.372348] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: name: qsee
- [ 1.562978] cm36651_setup_reg: initial proximity value = 0
- [ 1.682221] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: name: usb
- [ 1.701907] mms_ts 3-0048: [TSP] ISC Ver [0xbd] [0x22] [0x22]
- [ 1.706699] mms_ts 3-0048: [TSP] fw is latest. Do not update.
- [ 1.719182] [__s5c73m3_probe:3868] S5C73M3 probe
- [ 1.722997] [s5c73m3_sensor_probe_cb:3843] Entered
- [ 1.727666] [s5c73m3_i2c_probe:3725] Entered
- [ 1.731878] [s5c73m3_init_client:3424] Entered
- [ 1.736517] [s5c73m3_i2c_probe:3745] Exit
- [ 1.741645] [s5c73m3_sensor_probe:3776] Entered
- [ 1.745399] [s5c73m3_spi_init:226] Entered
- [ 1.749488] [s5c73m3_spi_probe:191] Entered
- [ 1.753609] [s5c73m3_spi_probe:201] s5c73m3_spi successfully probed
- [ 1.759987] [s5c73m3_sensor_probe : 3799] Probe_done!!
- [ 1.818129] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: name: msm_sdcc
- [ 1.822554] couldn't get usb power supply
- [ 1.832992] mmc0: No card detect facilities available
- [ 1.839371] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: name: msm_sdcc
- [ 1.856462] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: name: msm_sdcc
- [ 1.868853] aat1290a_led_probe : Probe
- [ 2.173844] bam_dmux_init : unable to create IPC Logging Context
- [ 2.213093] cypress_touchkey 16-0020: Touchkey FW Version: 0x06
- [ 5.748634] init: /init.qcom.rc: 604: ignored duplicate definition of service 'ril-daemon'
- [ 5.758003] init: /init.target.rc: 42: invalid command 'check_fs'
- [ 5.763131] init: /init.target.rc: 46: invalid command 'check_fs'
- [ 5.769296] init: /init.target.rc: 50: invalid command 'check_fs'
- [ 5.775339] init: /init.target.rc: 73: invalid command 'check_fs'
- [ 5.785472] init: invalid uid 'fm_radio'
- [ 6.222707] init: could not open /dev/keychord
- [ 8.098122] healthd: wakealarm_init: timerfd_create failed
- [ 8.117350] init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'
- [ 8.131115] init: cannot find '/system/bin/qrngd', disabling 'qrngd'
- [ 9.078437] diag: proc 1, msg mask update fail -12, tried 419
- [ 9.494246] store_afe_cal: offset -1241250752 is > mem_len 344064
- [ 12.530230] smd_tty_open: DATA1 open failed -19
- [ 15.194964] smd_tty_open: DATA1 open failed -19
- [ 17.815962] smd_tty_open: DATA1 open failed -19
- [ 20.432626] smd_tty_open: DATA1 open failed -19
- [ 20.587150] init: cannot find '/system/bin/ssr_diag', disabling 'ssr_diag'
- [ 20.593163] init: property 'persist.fuse_sdcard' doesn't exist while expanding '${persist.fuse_sdcard}'
- [ 20.609247] init: cannot expand '${persist.fuse_sdcard}' while assigning to 'ro.fuse_sdcard'
- [ 20.622462] init: property 'sys.powerctl' doesn't exist while expanding '${sys.powerctl}'
- [ 20.631191] init: powerctl: cannot expand '${sys.powerctl}'
- [ 20.639707] init: property 'sys.sysctl.extra_free_kbytes' doesn't exist while expanding '${sys.sysctl.extra_free_kbytes}'
- [ 20.658599] init: cannot expand '${sys.sysctl.extra_free_kbytes}' while writing to '/proc/sys/vm/extra_free_kbytes'
- [ 20.671326] enable_store: android_usb: already disabled
- [ 20.692568] init: no such service 'quipc_igsn'
- [ 20.707279] init: no such service 'quipc_main'
- [ 20.740820] init: no such service 'location_mq'
- [ 20.754616] init: no such service 'lowi-server'
- [ 20.829085] accel_open_calibration: Can't open calibration file
- [ 20.835342] init: no such service 'battery_monitor'
- [ 24.102975] Notify: smsm init
- [ 25.601861] diag: proc 0, msg mask update fail -12, tried 419
- [ 25.638730]
- [ 25.638760] SMSM: Modem SMSM state changed to SMSM_RESET.
- [ 25.644559]
- [ 25.644559] SMSM: Modem SMSM state changed to SMSM_RESET.
- [ 25.651335] modem_queue_start_reset_notify
- [ 25.654875] Notify: start reset
- [ 25.654875] Probable fatal error on the modem.
- [ 25.654906] modem subsystem failure reason: fws_task.c:450:FW processor SMEM request timeout (109).
- [ 25.654906] subsys-restart: subsystem_restart_dev(): Restart sequence requested for modem, restart_level = 1.
- [ 25.654906] Kernel panic - not syncing: subsys-restart: Resetting the SoC - modem crashed.
- [ 25.654936] [<c0013bb0>] (unwind_backtrace+0x0/0xe0) from [<c0740c50>] (panic+0x88/0x1f8)
- [ 25.654967] [<c0740c50>] (panic+0x88/0x1f8) from [<c004fed0>] (subsystem_restart_dev+0xf8/0x124)
- [ 25.654967] [<c004fed0>] (subsystem_restart_dev+0xf8/0x124) from [<c0050fb4>] (restart_modem+0xa0/0xd4)
- [ 25.654997] [<c0050fb4>] (restart_modem+0xa0/0xd4) from [<c002f91c>] (notify_smsm_cb_clients_worker+0xa4/0x1c4)
- [ 25.654997] [<c002f91c>] (notify_smsm_cb_clients_worker+0xa4/0x1c4) from [<c00863b8>] (process_one_work+0x22c/0x428)
- [ 25.655028] [<c00863b8>] (process_one_work+0x22c/0x428) from [<c0086900>] (worker_thread+0x19c/0x2bc)
- [ 25.655028] [<c0086900>] (worker_thread+0x19c/0x2bc) from [<c008a1c8>] (kthread+0x84/0x94)
- [ 25.655058] [<c008a1c8>] (kthread+0x84/0x94) from [<c000e9ec>] (kernel_thread_exit+0x0/0x8)
- [ 25.763009] CPU0: stopping
- [ 25.765634] [<c0013bb0>] (unwind_backtrace+0x0/0xe0) from [<c0012c0c>] (handle_IPI+0x100/0x1d4)
- [ 25.774362] [<c0012c0c>] (handle_IPI+0x100/0x1d4) from [<c0008670>] (gic_handle_irq+0xa8/0xb4)
- [ 25.782969] [<c0008670>] (gic_handle_irq+0xa8/0xb4) from [<c000db00>] (__irq_svc+0x40/0x70)
- [ 25.791301] Exception stack(0xed271ef8 to 0xed271f40)
- [ 25.796276] 1ee0: 00000000 00000000
- [ 25.804486] 1f00: 00000000 c0ec42c0 00000202 00000000 ed271fb0 fa003000 0000000a 000031f4
- [ 25.812665] 1f20: 3f2f9f3c 41bd6d3c c0d34d00 ed271f40 c0073c38 c00735f4 20000113 ffffffff
- [ 25.820784] [<c000db00>] (__irq_svc+0x40/0x70) from [<c00735f4>] (__do_softirq+0x64/0x26c)
- [ 25.829055] [<c00735f4>] (__do_softirq+0x64/0x26c) from [<c0073c38>] (irq_exit+0x48/0xa0)
- [ 25.837234] [<c0073c38>] (irq_exit+0x48/0xa0) from [<c000e7c4>] (handle_IRQ+0x80/0xc0)
- [ 25.845078] [<c000e7c4>] (handle_IRQ+0x80/0xc0) from [<c000862c>] (gic_handle_irq+0x64/0xb4)
- [ 25.853532] [<c000862c>] (gic_handle_irq+0x64/0xb4) from [<c000dcbc>] (__irq_usr+0x3c/0x60)
- [ 25.861864] Exception stack(0xed271fb0 to 0xed271ff8)
- [ 25.866839] 1fa0: 41e12538 00000010 6c7fd070 41e8c7b0
- [ 25.875049] 1fc0: 6e55da24 6d431810 414c94b8 000030f7 414e7e80 000031f4 6d4317fc 41bd6d3c
- [ 25.883229] 1fe0: 000000f7 bed8b5d8 00000000 414ebc70 200d0010 ffffffff
- [ 25.890767] msm_pm_wait_cpu_shutdown(): Timed out waiting for CPU 0 SPM to enter sleep state
- [ 25.998412] Rebooting in 5 seconds..
- [ 31.003357] msm_pm_wait_cpu_shutdown(): Timed out waiting for CPU 0 SPM to enter sleep state
- [ 31.010834] Going down for restart now
- [ 31.014771] msm_restart : clear reset flag
- No errors detected
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement