root@OpenWrt:~# ./rt3883 boot
Insmod with MAC1=4c:09:d4:15:10:54 and MAC2=4c:09:d4:15:10:56
[  480.883731] Warnning!! syncmiimac is foreced to 0 in dual concurrent mode.
[  480.889294] RT3883iNIC: 802.11n WLAN MII driver v2.4.0.6 (Feb. 09, 2011)
[  480.896068] eth0.3: Master at 0x0, 00:11:22:33:44:55
[  480.901018] Use default profile path.
[  480.904585] -----> mii_hardware_reset
[  480.918442] -----> mii_hardware_reset
[  480.920734] Update MAC(0)=4c:09:d4:15:10:54
[  480.924941] ============= Init Thread ===================
[  480.930626] RacfgTaskThread pid = 2308
[  480.934557] RacfgBacklogThread pid = 2309
[  480.940276] wl000: Ralink iNIC at 0x0, 4c:09:d4:15:10:54
[  480.957147] Update MAC(0)=4c:09:d4:15:10:56
[  480.959998] ============= Init Thread ===================
[  480.965568] Ignored command_type: 1, command_id: 1
[  480.966022] RacfgTaskThread pid = 2314
[  480.974650] RacfgBacklogThread pid = 2315
[  480.980321] wl010: Ralink iNIC at 0x0, 4c:09:d4:15:10:56
[  480.993911] iNIC Open wl000
[  480.995470] -----> mii_hardware_reset
[  482.011035] -----> mii_hardware_reset
[  482.013271] Op mode = 1
[  482.015788] ConcurrentObj.CardCount=0
[  482.019438] Read profile[0]
[  482.025252] BssidNum=2
[  482.027990] Read profile[1]
[  482.030627] BssidNum=2
[  482.033421] rlk_inic_mbss_init (pAd->RaCfgObj.BssidNum=2)
[  482.037485] rlk_inic_mbss_init --->
[  482.041008] Register MBSSID IF (wl001)
[  482.044782] RACFG_CMD_BOOT_NOTIFY
[  482.048200] register_netdev done
[  482.049047] Firmware path iNIC/RT3883/iNIC_ap.bin
[  482.051235] rlk_inic_mbss_init <---
[  482.055873] Profile[0] path iNIC/RT3883/iNIC_ap.dat, read path iNIC/RT3883/iNIC_ap.dat
[  482.055906] EEPROM[0] path iNIC/RT3883/iNIC_e2p.bin, read path iNIC/RT3883/iNIC_e2p.bin
[  482.059375] ConcurrentObj.CardCount=0 init_flag=0
[  482.067299] Profile[1] path iNIC/RT3883/iNIC_ap1.dat, read path iNIC/RT3883/iNIC_ap1.dat
[  482.075326] Wait for boot done...
[  482.079984] EEPROM[1] path iNIC/RT3883/iNIC_e2p1.bin, read path iNIC/RT3883/iNIC_e2p1.bin
[  482.080010] Request file: iNIC/RT3883/iNIC_ap.bin
[  482.088135] Call RaCfgWaitSyncRsp
[  482.337968] Request file: iNIC/RT3883/iNIC_ap.dat
[  482.341944] Request file: iNIC/RT3883/iNIC_e2p.bin
[  482.348976] Request file: iNIC/RT3883/iNIC_ap1.dat
[  482.352763] Request file: iNIC/RT3883/iNIC_e2p1.bin
[  482.358738] Upload Profile 1024 bytes from file, 0 from extra...
[  483.041972] RACFG_CMD_BOOT_INITCFG(0)
[  483.044375] Upload Profile 1024 bytes from file, 0 from extra...
[  483.050715] RACFG_CMD_BOOT_INITCFG(1)
[  483.054059] Upload Profile 1024 bytes from file, 0 from extra...
[  483.060395] RACFG_CMD_BOOT_INITCFG(2)
[  483.063712] Upload Profile 1024 bytes from file, 0 from extra...
[  483.070068] RACFG_CMD_BOOT_INITCFG(3)
[  483.073390] Upload Profile 1024 bytes from file, 78 from extra...
[  483.079806] RACFG_CMD_BOOT_INITCFG(4)
[  483.083247] Upload Profile 550 bytes from file, 0 from extra...
[  483.089219] RACFG_CMD_BOOT_INITCFG(5)
[  483.092691] Upload Profile 0 bytes from file, 0 from extra...
[  483.098311] Send Init Cfg Data Done(6 packets)
[  483.103253] RACFG_CMD_BOOT_UPLOAD(0)
[  483.106829] RACFG_CMD_BOOT_UPLOAD(1)
[  483.110504] RACFG_CMD_BOOT_UPLOAD(2)
[  483.421812] net wl000: CRC: 01 08 14 18 07 3a 97 85 22 32 2e 35 2e 31 2e 33 22 00 00 00 32 30 31 34 31 32 31 32 00 00 00 00 00 00 00 00 58 cb 08 00
[  483.434186] Send RT3883iNIC Firmware Done
[  483.437660] ===================================
[  483.442191] version: "2.5.1.3"
[  483.445246] size:    576344 bytes
[  483.448591] date:    20141212
[  483.451503] ===================================
[  483.451503]
[  483.457523] Send STARTUP to RT3883iNIC
[  483.461327] Close Firmware file
[  483.464595] RACFG_CMD_BOOT_STARTUP
[  491.277082] RACFG_CMD_GET_MAC, len: 35
[  491.279549] Get concurrent card MAC address:4c:09:d4:15:10:544c:09:d4:15:10:56
[  491.286796] Update MAC(0)=4c:09:d4:15:10:54
[  491.290978] Update MAC(1)=4e:09:d4:15:10:54
[  491.295154] Update MAC(0)=4c:09:d4:15:10:56
[  491.299314] Warning! MAC addr not equal to MII master =>
[  491.299345] set MiiMasterMac=00:11:22:33:44:55
[  491.309118] You've assigned a different MAC.
[  491.313415] OK! Got target's MAC address, boot done.
[  491.326544] iNIC Open wl010
[  491.327977] Op mode = 1
[  491.330314] ConcurrentObj.CardCount=1
[  491.334238] rlk_inic_mbss_init (pAd->RaCfgObj.BssidNum=2)
[  491.339495] rlk_inic_mbss_init --->
[  491.343025] Register MBSSID IF (wl011)
[  491.348686] register_netdev done
[  491.350549] rlk_inic_mbss_init <---
[  491.354143] ConcurrentObj.CardCount=1 init_flag=1
scan device: wl000
Shutdown interface wl000
scan device: wl010
Shutdown interface wl010
scan device: wl000
Enable device wl000
DEVICE: wl000 VIF: default_wl000
Encryption: psk2+aes
Preparing interface <wl000>

Bring up interface <wl000> to be able to send iwpriv commands
Configure wifi device wl000

Starting wifi device wl000
iwpriv 'wl000' set Enable=1; iwpriv 'wl000' set Enable=0; iwpriv 'wl000' set RadioOn=0; iwpriv 'wl000' set AuthMode=WEPAUTO; iwpriv 'wl000' set EncrypType=WEP; iwpriv 'wl000' set IEEE8021X=0; echo 'wl000' is WPA2-AES MODE; iwpriv 'wl000' set AuthMode=WPA2PSK; iwpriv 'wl000' set EncrypType=AES; iwpriv 'wl000' set IEEE8021X=0; iwpriv 'wl000' set WPAPSK='hoppelfilm32'; iwpriv 'wl000' set DefaultKeyID=2; iwpriv 'wl000' set SSID=wl000 ; iwpriv 'wl000' set Channel=36 ; iwpriv 'wl000' set Enable=1; iwpriv 'wl000' set RadioOn=1
wl000 is WPA2-AES MODE
scan device: wl010
Enable device wl010
DEVICE: wl010 VIF: default_wl010
Encryption: psk2+aes
DEVICE: wl010 VIF: default_wl010
Encryption: psk2+aes
Preparing interface <wl010>

Bring up interface <wl010> to be able to send iwpriv commands
Configure wifi device wl010

Starting wifi device wl010
iwpriv 'wl010' set Enable=1; iwpriv 'wl010' set Enable=0; iwpriv 'wl010' set RadioOn=0; iwpriv 'wl010' set AuthMode=WEPAUTO; iwpriv 'wl010' set EncrypType=WEP; iwpriv 'wl010' set IEEE8021X=0; echo 'wl010' is WPA2-AES MODE; iwpriv 'wl010' set AuthMode=WPA2PSK; iwpriv 'wl010' set EncrypType=AES; iwpriv 'wl010' set IEEE8021X=0; iwpriv 'wl010' set WPAPSK='hoppelfilm32'; iwpriv 'wl010' set DefaultKeyID=2; iwpriv 'wl010' set SSID=wl010 ; iwpriv 'wl010' set Channel=6 ; iwpriv 'wl010' set Enable=1; iwpriv 'wl010' set RadioOn=1 ; iwpriv 'wl010' set Enable=1; iwpriv 'wl010' set Enable=0; iwpriv 'wl010' set RadioOn=0; iwpriv 'wl010' set AuthMode=WEPAUTO; iwpriv 'wl010' set EncrypType=WEP; iwpriv 'wl010' set IEEE8021X=0; echo 'wl010' is WPA2-AES MODE; iwpriv 'wl010' set AuthMode=WPA2PSK; iwpriv 'wl010' set EncrypType=AES; iwpriv 'wl010' set IEEE8021X=0; iwpriv 'wl010' set WPAPSK='hoppelfilm32'; iwpriv 'wl010' set DefaultKeyID=2; iwpriv 'wl010' set SSID=wl010 ; iwpriv 'wl010' set Channel=6 ; iwpriv 'wl010' set Enable=1; iwpriv 'wl010' set RadioOn=1
wl010 is WPA2-AES MODE
wl010 is WPA2-AES MODE
root@OpenWrt:~#
root@OpenWrt:~#
root@OpenWrt:~#
root@OpenWrt:~# strace tc qdisc show dev br-lan
execve("/usr/sbin/tc", ["tc", "qdisc", "show", "dev", "br-lan"], 0x7fd36af0 /* 7 vars */) = 0
set_thread_area(0x77f52eb8)             = 0
set_tid_address(0x77f49fa8)             = 2633
open("/etc/ld-musl-mips-sf.path", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/lib/libelf.so.1", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/usr/local/lib/libelf.so.1", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/usr/lib/libelf.so.1", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = 3
fcntl64(3, F_SETFD, FD_CLOEXEC)         = 0
fstat64(3, {st_mode=S_IFREG|0755, st_size=98860, ...}) = 0
read(3, "\177ELF\1\2\1\0\0\0\0\0\0\0\0\0\0\3\0\10\0\0\0\1\0\0\37\340\0\0\0004"..., 936) = 936
mmap2(NULL, 167936, PROT_READ|PROT_EXEC, MAP_PRIVATE, 3, 0) = 0x77e7a000
mmap2(0x77ea1000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED, 3, 0x17000) = 0x77ea1000
close(3)                                = 0
open("/lib/libmnl.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/usr/local/lib/libmnl.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/usr/lib/libmnl.so.0", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = 3
fcntl64(3, F_SETFD, FD_CLOEXEC)         = 0
fstat64(3, {st_mode=S_IFREG|0755, st_size=12472, ...}) = 0
read(3, "\177ELF\1\2\1\0\0\0\0\0\0\0\0\0\0\3\0\10\0\0\0\1\0\0\23\20\0\0\0004"..., 936) = 936
mmap2(NULL, 81920, PROT_READ|PROT_EXEC, MAP_PRIVATE, 3, 0) = 0x77e66000
mmap2(0x77e78000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED, 3, 0x2000) = 0x77e78000
close(3)                                = 0
open("/lib/libxtables.so.12", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = -1 ENOENT ([  517.310974] CPU 0 Unable to handle kernel paging request at virtual address 00000014, epc == 8051a668, ra == 8040a2f0
[  517.321470] Oops[#1]:
[  517.323644] CPU: 0 PID: 2633 Comm: tc Not tainted 4.19.57 #0
[  517.329277] $ 0   : 00000000 7f84e448 00000200 00000200
[  517.334499] $ 4   : 86cfe800 00000001 00000000 00000008
[  517.339719] $ 8   : 00000010 80547900 5d2dbf01 00000000
[  517.344941] $12   : 00000000 90800000 7fbedaf8 00000000
[  517.350164] $16   : 806da700 0000030c 86cfe800 806f8658
[  517.355386] $20   : 00000001 00000000 00000420 806f7220
[  517.360609] $24   : 00000000 8054ce1c
[  517.365831] $28   : 86d38000 86d39bb0 00000000 8040a2f0
[  517.371055] Hi    : 00000000
[  517.373925] Lo    : 00000007
[  517.376828] epc   : 8051a668 br_get_link_af_size_filtered+0x20/0x1e4
[  517.383178] ra    : 8040a2f0 if_nlmsg_size+0x1d8/0x238
[  517.388289] Status: 1100ff03	KERNEL EXL IE
[  517.392469] Cause : 00800008 (ExcCode 02)
[  517.396471] BadVA : 00000014
[  517.399345] PrId  : 00019556 (MIPS 34Kc)
[  517.403258] Modules linked in: rt3883_iNIC iptable_nat ipt_MASQUERADE xt_state xt_nat xt_conntrack xt_REDIRECT xt_FLOWOFFLOAD xt_CT pppoe nf_nat_ipv4 nf_nat nf_flow_table_hw nf_flow_table nf_conntrack_rtcache nf_conntrack ipt_REJECT xt_time xt_tcpudp xt_multiport xt_mark xt_mac xt_limit xt_comment xt_TCPMSS xt_LOG pppox ppp_async nf_reject_ipv4 nf_log_ipv4 nf_defrag_ipv6 nf_defrag_ipv4 ltq_deu_vr9 iptable_mangle iptable_filter ip_tables drv_vmmc crc_ccitt sch_tbf sch_ingress sch_htb sch_hfsc em_u32 cls_u32 cls_tcindex cls_route cls_matchall cls_fw cls_flow cls_basic act_skbedit act_mirred drv_dsl_cpe_api drv_mei_cpe nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables ip6t_REJECT x_tables nf_reject_ipv6 pppoatm ppp_generic slhc br2684 atm drv_tapi drv_ifxos dwc2 gpio_button_hotplug
[  517.474043] Process tc (pid: 2633, threadinfo=2aa1a2b9, task=7e025bde, tls=77f52eb8)
[  517.481768] Stack : 00000033 ffff3fff fffffffc 802a8054 806da700 8040a2f0 806cb378 806ea640
[  517.490123]         805556ec 00000002 86cfe800 000008f4 806f72c0 00000001 8040e8a0 80870000
[  517.498479]         00000000 8040a830 00000001 87e75230 00000000 00000000 805c213c 00000000
[  517.506834]         00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[  517.515190]         00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[  517.523546]         ...
[  517.525984] Call Trace:
[  517.528440] [<8051a668>] br_get_link_af_size_filtered+0x20/0x1e4
[  517.534453] [<8040a2f0>] if_nlmsg_size+0x1d8/0x238
[  517.539236] [<8040a830>] rtnl_calcit.isra.26+0xbc/0x110
[  517.544457] [<8040a9bc>] rtnetlink_rcv_msg+0x138/0x340
[  517.549607] [<8043d0e4>] netlink_rcv_skb+0xd4/0x178
[  517.554467] [<8043c7ac>] netlink_unicast+0x18c/0x274
[  517.559428] [<8043cc70>] netlink_sendmsg+0x3dc/0x438
[  517.564391] [<803d1d4c>] __sys_sendto+0xd4/0x12c
[  517.569005] [<8001ba58>] syscall_common+0x34/0x58
[  517.573698] Code: 10600007  00000000  8c860224 <8cc40014> 1480000e  30a20002  1000005e  00008025  30420002
[  517.583430]
[  517.585099] ---[ end trace 1b055b6ad93236d3 ]---
No such file or d[  517.595615] Kernel panic - not syncing: Fatal exception
[  517.604067] Rebooting in 3 seconds..