Initializing cgroup subsys cpuset
Initializing cgroup subsys cpuacct
Linux version 3.18.11-rt7 (root@gentoo) (gcc version 4.8.4 (Gentoo 4.8.4 p1.4, pie-0.6.1) ) #25 SMP PREEMPT RT Thu May 31 00:08:46 UTC 2018
Command line: BOOT_IMAGE=/boot/vmlinuz-3.18.11-rt7 root=/dev/sda4 ro net.ifnames=0 panic=1 console=tty0 console=ttyS0,115200 console=ttyS1,115200
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009b3ff] usable
BIOS-e820: [mem 0x000000000009b400-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000000fffffff] usable
BIOS-e820: [mem 0x0000000010000000-0x0000000012150fff] reserved
BIOS-e820: [mem 0x0000000012151000-0x0000000076252fff] usable
BIOS-e820: [mem 0x0000000076253000-0x000000007935efff] reserved
BIOS-e820: [mem 0x000000007935f000-0x000000007943bfff] usable
BIOS-e820: [mem 0x000000007943c000-0x0000000079793fff] ACPI NVS
BIOS-e820: [mem 0x0000000079794000-0x0000000079df5fff] reserved
BIOS-e820: [mem 0x0000000079df6000-0x000000007a169fff] usable
BIOS-e820: [mem 0x000000007a16a000-0x000000007a16afff] ACPI NVS
BIOS-e820: [mem 0x000000007a16b000-0x000000007a184fff] reserved
BIOS-e820: [mem 0x000000007a185000-0x000000007a777fff] usable
BIOS-e820: [mem 0x000000007a778000-0x000000007a779fff] reserved
BIOS-e820: [mem 0x000000007a77a000-0x000000007affffff] usable
BIOS-e820: [mem 0x000000007b000000-0x000000007fffffff] reserved
BIOS-e820: [mem 0x00000000d0000000-0x00000000d0ffffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fe042000-0x00000000fe044fff] reserved
BIOS-e820: [mem 0x00000000fe900000-0x00000000fe902fff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000017fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 3.0 present.
e820: last_pfn = 0x180000 max_arch_pfn = 0x400000000
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: last_pfn = 0x7b000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fcb40-0x000fcb4f] mapped at [ffff8800000fcb40]
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
init_memory_mapping: [mem 0x17fe00000-0x17fffffff]
init_memory_mapping: [mem 0x17c000000-0x17fdfffff]
init_memory_mapping: [mem 0x100000000-0x17bffffff]
init_memory_mapping: [mem 0x00100000-0x0fffffff]
init_memory_mapping: [mem 0x12151000-0x76252fff]
init_memory_mapping: [mem 0x7935f000-0x7943bfff]
init_memory_mapping: [mem 0x79df6000-0x7a169fff]
init_memory_mapping: [mem 0x7a185000-0x7a777fff]
init_memory_mapping: [mem 0x7a77a000-0x7affffff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F05B0 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000797450C0 0000DC (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: FACP 0x000000007974F950 000114 (v06 ALASKA A M I    01072009 AMI  00010013)
ACPI BIOS Warning (bug): FADT (revision 6) is longer than ACPI 5.0 version, truncating length 276 to 268 (20140926/tbfadt-387)
ACPI: DSDT 0x0000000079745240 00A70B (v02 ALASKA A M I    01072009 INTL 20120913)
ACPI: FACS 0x0000000079793080 000040
ACPI: FPDT 0x000000007974FA70 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: FIDT 0x000000007974FAC0 00009C (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: MCFG 0x000000007974FB60 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
ACPI: HROT 0x000000007974FBA0 0000DB (v01 INTEL  EDK2     00000005 INTL 0100000D)
ACPI: DBG2 0x000000007974FC80 000072 (v00 INTEL  EDK2     00000003 BRXT 0100000D)
ACPI: DBGP 0x000000007974FD00 000034 (v01 INTEL  EDK2     00000003 BRXT 0100000D)
ACPI: HPET 0x000000007974FD40 000038 (v01 INTEL  EDK2     00000003 BRXT 0100000D)
ACPI: LPIT 0x000000007974FD80 00005C (v01 INTEL  EDK2     00000003 BRXT 0100000D)
ACPI: APIC 0x000000007974FDE0 000084 (v03 INTEL  EDK2     00000003 BRXT 0100000D)
ACPI: NPKT 0x000000007974FE70 000065 (v01 INTEL  EDK2     00000003 BRXT 0100000D)
ACPI: PRAM 0x000000007974FEE0 000030 (v01 INTEL  EDK2     00000003 BRXT 0100000D)
ACPI: WSMT 0x000000007974FF10 000028 (v01 INTEL  EDK2     00000003 BRXT 0100000D)
ACPI: SSDT 0x000000007974FF40 000B53 (v02 INTEL  UsbCTabl 00000003 BRXT 0100000D)
ACPI: SSDT 0x0000000079750AA0 00199B (v01 Intel_ Platform 00001000 INTL 20120913)
ACPI: SSDT 0x0000000079752440 00035B (v02 PmRef  Cpu0Ist  00003000 INTL 20120913)
ACPI: SSDT 0x00000000797527A0 00072B (v02 CpuRef CpuSsdt  00003000 INTL 20120913)
ACPI: SSDT 0x0000000079752ED0 00032D (v02 PmRef  Cpu0Tst  00003000 INTL 20120913)
ACPI: SSDT 0x0000000079753200 00017C (v02 PmRef  ApTst    00003000 INTL 20120913)
ACPI: SSDT 0x0000000079753380 002811 (v02 SaSsdt SaSsdt   00003000 INTL 20120913)
ACPI: UEFI 0x0000000079755BA0 000042 (v01 ALASKA A M I    00000000      00000000)
ACPI: TPM2 0x0000000079755BF0 000034 (v03        Tpm2Tabl 00000001 AMI  00000000)
ACPI: WDAT 0x0000000079755C30 000104 (v01                 00000000      00000000)
Zone ranges:
  DMA      [mem 0x00001000-0x00ffffff]
  DMA32    [mem 0x01000000-0xffffffff]
  Normal   [mem 0x100000000-0x17fffffff]
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x00001000-0x0009afff]
  node   0: [mem 0x00100000-0x0fffffff]
  node   0: [mem 0x12151000-0x76252fff]
  node   0: [mem 0x7935f000-0x7943bfff]
  node   0: [mem 0x79df6000-0x7a169fff]
  node   0: [mem 0x7a185000-0x7a777fff]
  node   0: [mem 0x7a77a000-0x7affffff]
  node   0: [mem 0x100000000-0x17fffffff]
Initmem setup node 0 [mem 0x00001000-0x17fffffff]
ACPI: PM-Timer IO Port: 0x408
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] disabled)
ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-119
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 4 CPUs, 2 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009b000-0x0009bfff]
PM: Registered nosave memory: [mem 0x0009c000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0x10000000-0x12150fff]
PM: Registered nosave memory: [mem 0x76253000-0x7935efff]
PM: Registered nosave memory: [mem 0x7943c000-0x79793fff]
PM: Registered nosave memory: [mem 0x79794000-0x79df5fff]
PM: Registered nosave memory: [mem 0x7a16a000-0x7a16afff]
PM: Registered nosave memory: [mem 0x7a16b000-0x7a184fff]
PM: Registered nosave memory: [mem 0x7a778000-0x7a779fff]
PM: Registered nosave memory: [mem 0x7b000000-0x7fffffff]
PM: Registered nosave memory: [mem 0x80000000-0xcfffffff]
PM: Registered nosave memory: [mem 0xd0000000-0xd0ffffff]
PM: Registered nosave memory: [mem 0xd1000000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfe041fff]
PM: Registered nosave memory: [mem 0xfe042000-0xfe044fff]
PM: Registered nosave memory: [mem 0xfe045000-0xfe8fffff]
PM: Registered nosave memory: [mem 0xfe900000-0xfe902fff]
PM: Registered nosave memory: [mem 0xfe903000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfed00fff]
PM: Registered nosave memory: [mem 0xfed01000-0xfed01fff]
PM: Registered nosave memory: [mem 0xfed02000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xff7fffff]
PM: Registered nosave memory: [mem 0xff800000-0xffffffff]
e820: [mem 0x80000000-0xcfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 27 pages/cpu @ffff88017fc00000 s72960 r8192 d29440 u524288
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 988673
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.18.11-rt7 root=/dev/sda4 ro net.ifnames=0 panic=1 console=tty0 console=ttyS0,115200 console=ttyS1,115200
PID hash table entries: 4096 (order: 3, 32768 bytes)
Dentry cache hash table entries: 524288 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
xsave: enabled xstate_bv 0x1b, cntxt size 0x2c0 using compacted form
Memory: 3863892K/4017560K available (6336K kernel code, 468K rwdata, 2060K rodata, 820K init, 1192K bss, 153668K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Preemptible hierarchical RCU implementation.
        RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=4.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
NR_IRQS:4352 nr_irqs:1024 0
Console: colour VGA+ 80x25
console [tty0] enabled
console [ttyS0] enabled
tsc: Fast TSC calibration failed
tsc: PIT calibration matches HPET. 1 loops
tsc: Detected 1285.797 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 2571.59 BogoMIPS (lpj=1285797)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20140926
ACPI: All ACPI Tables successfully acquired
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 7 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
Freeing SMP alternatives memory: 24K (ffffffff8197a000 - ffffffff81980000)
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Atom(TM) Processor E3930 @ 1.30GHz (fam: 06, model: 5c, stepping: 09)
Performance Events: no PEBS fmt3+, generic architected perfmon, full-width counters, Intel PMU driver.
... version:                4
... bit width:              48
... generic registers:      4
... value mask:             0000ffffffffffff
... max period:             0000ffffffffffff
... fixed-purpose events:   3
... event mask:             000000070000000f
x86: Booting SMP configuration:
.... node  #0, CPUs:      #1
x86: Booted up 1 node, 2 CPUs
smpboot: Total of 2 processors activated (5143.18 BogoMIPS)
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0x7943c000-0x79793fff] (3506176 bytes)
PM: Registering ACPI NVS region [mem 0x7a16a000-0x7a16afff] (4096 bytes)
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 3 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88017AA95A00 000102 (v02 PmRef  Cpu0Cst  00003001 INTL 20120913)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88017AA95C00 00015F (v02 PmRef  ApIst    00003000 INTL 20120913)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88017AA8D900 00008D (v02 PmRef  ApCst    00003000 INTL 20120913)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140926/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140926/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Power Resource [FN00] (on)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io  0x0000-0x006f]
pci_bus 0000:00: root bus resource [io  0x0078-0x0cf7]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff]
pci_bus 0000:00: root bus resource [mem 0x7c000001-0x7fffffff]
pci_bus 0000:00: root bus resource [mem 0x7b800001-0x7bffffff]
pci_bus 0000:00: root bus resource [mem 0x80000000-0xcfffffff]
pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff]
pci 0000:00:0e.0: System wakeup disabled by ACPI
pci 0000:00:13.0: System wakeup disabled by ACPI
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:15.0: System wakeup disabled by ACPI
pci 0000:00:13.0: PCI bridge to [bus 01]
pci 0000:02:00.0: System wakeup disabled by ACPI
pci 0000:00:14.0: PCI bridge to [bus 02]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
ACPI: Enabled 6 GPEs in block 00 to 7F
vgaarb: setting as boot device: PCI:0000:00:02.0
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
Switched to clocksource hpet
pnp: PnP ACPI init
system 00:00: [io  0x0a00-0x0a7f] has been reserved
system 00:04: [io  0x0680-0x069f] has been reserved
system 00:04: [io  0x0400-0x047f] has been reserved
system 00:04: [io  0x0500-0x05fe] has been reserved
system 00:04: [io  0x0600-0x061f] has been reserved
system 00:04: [io  0x164e-0x164f] has been reserved
system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
system 00:05: [mem 0xfea00000-0xfeafffff] has been reserved
system 00:05: [mem 0xfed01000-0xfed01fff] has been reserved
system 00:05: [mem 0xfed03000-0xfed03fff] has been reserved
system 00:05: [mem 0xfed06000-0xfed06fff] has been reserved
system 00:05: [mem 0xfed08000-0xfed09fff] has been reserved
system 00:05: [mem 0xfed80000-0xfedbffff] has been reserved
system 00:05: [mem 0xfed1c000-0xfed1cfff] has been reserved
system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
pnp: PnP ACPI: found 7 devices
pci 0000:00:13.0: PCI bridge to [bus 01]
pci 0000:00:14.0: PCI bridge to [bus 02]
pci 0000:00:14.0:   bridge window [mem 0x91100000-0x911fffff]
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 8, 1835008 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
TCP: reno registered
UDP hash table entries: 2048 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 2048 (order: 6, 262144 bytes)
NET: Registered protocol family 1
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x72253000-0x76253000] (64MB) mapped at [ffff880072253000-ffff880076252fff]
futex hash table entries: 1024 (order: 5, 131072 bytes)
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1533756250.917:1): initialized
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
squashfs: version 4.0 (2009/01/31) Phillip Lougher
ntfs: driver 2.1.31 [Flags: R/W DEBUG].
SGI XFS with ACLs, security attributes, realtime, no debug enabled
ocfs2: Registered cluster interface o2cb
OCFS2 User DLM kernel interface loaded
gfs2: GFS2 installed
msgmni has been set to 7546
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:13.0: Signaling PME through PCIe PME interrupt
pcieport 0000:00:14.0: Signaling PME through PCIe PME interrupt
pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
ACPI: Sleep Button [SLPB]
Serial: 8250/16550 driver, 12 ports, IRQ sharing enabled
00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
[drm] Initialized drm 1.1.0 20060810
brd: module loaded
loop: module loaded
ahci 0000:00:12.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:00:12.0: flags: 64bit ncq sntf pm clo only pmp pio slum part deso sadm sds apst
scsi host0: ahci
scsi host1: ahci
ata1: SATA max UDMA/133 abar m2048@0x9121b000 port 0x9121b100 irq 122
ata2: SATA max UDMA/133 abar m2048@0x9121b000 port 0x9121b180 irq 122
xhci_hcd 0000:00:15.0: xHCI Host Controller
xhci_hcd 0000:00:15.0: new USB bus registered, assigned bus number 1
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 3.18.11-rt7 xhci-hcd
usb usb1: SerialNumber: 0000:00:15.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
xhci_hcd 0000:00:15.0: xHCI Host Controller
xhci_hcd 0000:00:15.0: new USB bus registered, assigned bus number 2
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 3.18.11-rt7 xhci-hcd
usb usb2: SerialNumber: 0000:00:15.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 7 ports detected
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:06: RTC can wake from S4
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:06: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
rtc (null): invalid alarm value: 1900-1-8 0:0:0
rtc-test rtc-test.0: rtc core: registered test as rtc1
rtc (null): invalid alarm value: 1900-1-8 0:0:0
rtc-test rtc-test.1: rtc core: registered test as rtc2
hidraw: raw HID events driver (C) Jiri Kosina
TCP: cubic registered
NET: Registered protocol family 17
registered taskstats version 1
rtc_cmos 00:06: setting system clock to 2018-08-08 19:24:12 UTC (1533756252)
ata2: SATA link down (SStatus 4 SControl 300)
usb 1-4: new low-speed USB device number 2 using xhci_hcd
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ATA-9: SAMSUNG MZMTD128HAFV-00000, DXT4200Q, max UDMA/133
ata1.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG MZMTD128 200Q PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3 sda4
sd 0:0:0:0: [sda] Attached SCSI disk
EXT3-fs (sda4): error: couldn't mount because of unsupported optional features (240)
EXT2-fs (sda4): error: couldn't mount because of unsupported optional features (240)
EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
VFS: Mounted root (ext4 filesystem) readonly on device 8:4.
Freeing unused kernel memory: 820K (ffffffff818ad000 - ffffffff8197a000)
usb 1-4: New USB device found, idVendor=045e, idProduct=00cb
usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-4: Product: Microsoft USB Optical Mouse
usb 1-4: Manufacturer: PixArt
usb 1-4: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 1-5: new low-speed USB device number 3 using xhci_hcd
tsc: Refined TSC clocksource calibration: 1286.400 MHz
usb 1-5: New USB device found, idVendor=045e, idProduct=07f8
usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-5: Product: Wired Keyboard 600
usb 1-5: Manufacturer: Microsoft
usb 1-5: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 1-5: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
rc[70]: segfault at 0 ip           (null) sp 00007ffd7ff060c0 error 14 in openrc[400000+1c000]
Switched to clocksource tsc
rc[251]: segfault at 0 ip           (null) sp 00007ffc88d52810 error 14 in openrc[400000+1c000]
rc[412]: segfault at 0 ip           (null) sp 00007fffd2090ec0 error 14 in openrc[400000+1c000]
usb 1-4: USB disconnect, device number 2
usb 1-4: new low-speed USB device number 4 using xhci_hcd
usb 1-4: New USB device found, idVendor=045e, idProduct=00cb
usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-4: Product: Microsoft USB Optical Mouse
usb 1-4: Manufacturer: PixArt
usb 1-4: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
random: nonblocking pool is initialized
usb 1-4: USB disconnect, device number 4
usb 1-4: new low-speed USB device number 5 using xhci_hcd
usb 1-4: New USB device found, idVendor=045e, idProduct=00cb
usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-4: Product: Microsoft USB Optical Mouse
usb 1-4: Manufacturer: PixArt
usb 1-4: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 1-4: USB disconnect, device number 5
usb 1-4: new low-speed USB device number 6 using xhci_hcd
usb 1-4: New USB device found, idVendor=045e, idProduct=00cb
usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-4: Product: Microsoft USB Optical Mouse
usb 1-4: Manufacturer: PixArt
usb 1-4: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes