Tires & brakes (Cayenne)

[2017-04-21 16:26:09] [Output] : ★ Lukas Ruiz walks towards the gate, as he would crouch on his knees.
[2017-04-21 16:26:51] [Output] : ★ Lukas Ruiz wraps his right palm around the handle of the toolbox, seizing it.
[2017-04-21 16:27:25] [Output] : ★ Lukas Ruiz walks towards the front left wheel of the car, as he would rest his legs while working,
[2017-04-21 16:27:29] [Output] : ★ with a slav squat.      ((Lukas Ruiz))
[2017-04-21 16:29:16] [Output] : ★ Lukas Ruiz drops the toolbox on the ground, grasping a torque wrench from the inside of it
[2017-04-21 16:29:48] [Output] : ★ Lukas Ruiz slides it inside one of the 5 nuts in the car's wheel, as he would then twist it counter-
[2017-04-21 16:29:57] [Output] : ★ clockwise, untightening the nut.      ((Lukas Ruiz))
[2017-04-21 16:33:10] [Output] : ★ Lukas Ruiz repeats the process for the remaining 4 nuts, following a random pattern, as the-
[2017-04-21 16:33:16] [Output] : ★ wheel would then be fully loose.      ((Lukas Ruiz))
[2017-04-21 16:34:33] [Output] : ★ Lukas Ruiz drops the torque wrench in the ground, proceeding to place both hands around the-
[2017-04-21 16:34:47] [Output] : ★ tire, wiggling it outwards from the axle.      ((Lukas Ruiz))
[2017-04-21 16:35:10] [Output] : ★ As the wheel would be out, Lukas proceed to grab the torque wrench back, sliding it-      ((Lukas Ruiz))
[2017-04-21 16:35:24] [Output] : ★ into the center of the hub, where there would be a nut holding the disk in place.      ((Lukas Ruiz))
[2017-04-21 16:35:55] [Output] : ★ Lukas Ruiz twists it counter-clockwise, untightening it with a bit of effort.
[2017-04-21 16:36:18] [Output] : ★ Lukas Ruiz then disconnects the brake fluid line, coming into the caliper.
[2017-04-21 16:36:35] [Output] : ★ Lukas Ruiz pulls the disk outwards, aswell as the caliper which would be tightened onto in.
[2017-04-21 16:36:37] [Output] : Lukas Ruiz: (( it* ))
[2017-04-21 16:36:51] [Output] : ★ The car would now be free of a brake system.      ((Lukas Ruiz))
[2017-04-21 16:37:09] [Output] : ★ Lukas Ruiz stands back up from his slav squat position, moving towards a couple of boxes-
[2017-04-21 16:37:14] [Output] : ★ standing infront of the car.      ((Lukas Ruiz))
[2017-04-21 16:37:16] [Output] : Lukas Ruiz: (( cardboard boxes* ))
[2017-04-21 16:37:57] [Output] : ★ Lukas Ruiz slides the top part of one of the boxes in half, with a pocket knife he had stored in his-
[2017-04-21 16:38:02] [Output] : ★ pants, popping it open.      ((Lukas Ruiz))
[2017-04-21 16:38:33] [Output] : ★ The box, reading 'Willwood' in big letters on the outside, would contain the new brake-      ((Lukas Ruiz))
[2017-04-21 16:38:36] [Output] : ★ system kit.      ((Lukas Ruiz))
[2017-04-21 16:38:51] [Output] : ★ Lukas Ruiz reaches for the brake rotor, aswell as for the caliper and 2 pads.
[2017-04-21 16:39:01] [Output] : ★ Lukas Ruiz walks back towards his previous position, crouching on his knees.
[2017-04-21 16:39:23] [Output] : ★ Lukas Ruiz drops the caliper and pads in the ground; inspects the brake rotor briefly, as he would-
[2017-04-21 16:39:30] [Output] : ★ then slide it in place, in the hub.      ((Lukas Ruiz))
[2017-04-21 16:39:48] [Output] : ★ Lukas Ruiz realises he forgot the nuts bag, walking back towards the box to seize it.
[2017-04-21 16:40:07] [Output] : ★ Lukas Ruiz slides one of the new nuts in the back into the center of the rotor, holding it onto-
[2017-04-21 16:40:09] [Output] : ★ the axle.      ((Lukas Ruiz))
[2017-04-21 16:40:26] [Output] : ★ Lukas Ruiz quickly tightens it with a torque wrench, according to the correct torque specifications.
[2017-04-21 16:40:53] [Output] : ★ Lukas Ruiz then grabs both the caliper and the pair of brake pads, sliding these last ones inside-
[2017-04-21 16:40:58] [Output] : ★ the black caliper.      ((Lukas Ruiz))
[2017-04-21 16:41:46] [Output] : ★ Lukas Ruiz then mounts the caliper onto the brake disk, while holding the pads in position.
[2017-04-21 16:42:02] [Output] : ★ Lukas Ruiz grabs 2 more slightly smaller nuts from the plastic bag, sliding them in two holes-
[2017-04-21 16:42:10] [Output] : ★ in the back part of the caliper.      ((Lukas Ruiz))
[2017-04-21 16:42:30] [Output] : ★ Lukas Ruiz reaches for the nuts, now in place, with his torque wrench, proceeding to rotate them-
[2017-04-21 16:42:35] [Output] : ★ clockwise, tightening them.      ((Lukas Ruiz))
[2017-04-21 16:43:05] [Output] : ★ Lukas Ruiz assembles the brake fluid line back in place, quickly checking for any mistakes.
[2017-04-21 16:43:11] [Output] : ((OOC Chance at 70%)) Lukas Ruiz's attempt has succeeded.
[2017-04-21 16:43:20] [Output] : ★ No major mistakes would have been made.      ((Lukas Ruiz))
[2017-04-21 16:43:35] [Output] : ★ Lukas Ruiz then proceeds to walk towards the gate once again, rolling one of the-
[2017-04-21 16:43:53] [Output] : ★ wrapped up wheels, equipped with Pirelli tires, towards the car.      ((Lukas Ruiz))
[2017-04-21 16:44:28] [Output] : ★ Lukas Ruiz unwraps it with his pocket knife, as he would then proceed to lift the rim and tire.
[2017-04-21 16:44:39] [Output] : ★ Lukas Ruiz points it at the hub, sliding it in place.
[2017-04-21 16:44:57] [Output] : ★ Lukas Ruiz seizes 5 more nuts from the plastic bag, as he would place them on the wheel following-
[2017-04-21 16:45:09] [Output] : ★ a star pattern, as he would tighten them as much as he would with his hand, as he goes.      ((Lukas Ruiz))
[2017-04-21 16:45:22] [Output] : ★ Lukas Ruiz then fully tightens the wheel, still following the star pattern.
[2017-04-21 16:45:35] [Output] : ★ Lukas Ruiz stand back up, moving towards the back wheel on the same side.
[2017-04-21 16:45:50] [Output] : ★ Lukas Ruiz repeats the process for that one, aswell as for the 2 remaining wheels on the other side.