daily pastebin goal
12%
SHARE
TWEET

Untitled

a guest Apr 9th, 2017 118 Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. [    0.000000] Linux version 4.4.59 (will@2ez) (gcc version 5.4.0 (LEDE GCC 5.4.0 r3914-cffeb31) ) #0 SMP Sat Apr 8 18:53:44 2017
  2. [    0.000000] SoC Type: MediaTek MT7621 ver:1 eco:3
  3. [    0.000000] bootconsole [early0] enabled
  4. [    0.000000] CPU0 revision is: 0001992f (MIPS 1004Kc)
  5. [    0.000000] MIPS: machine is Netgear R6220
  6. [    0.000000] Determined physical RAM map:
  7. [    0.000000]  memory: 08000000 @ 00000000 (usable)
  8. [    0.000000] Initrd not found or empty - disabling initrd
  9. [    0.000000] Zone ranges:
  10. [    0.000000]   Normal   [mem 0x0000000000000000-0x0000000007ffffff]
  11. [    0.000000]   HighMem  empty
  12. [    0.000000] Movable zone start for each node
  13. [    0.000000] Early memory node ranges
  14. [    0.000000]   node   0: [mem 0x0000000000000000-0x0000000007ffffff]
  15. [    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff]
  16. [    0.000000] On node 0 totalpages: 32768
  17. [    0.000000] free_area_init_node: node 0, pgdat 8045b000, node_mem_map 81000000
  18. [    0.000000]   Normal zone: 256 pages used for memmap
  19. [    0.000000]   Normal zone: 0 pages reserved
  20. [    0.000000]   Normal zone: 32768 pages, LIFO batch:7
  21. [    0.000000] VPE topology {2} total 2
  22. [    0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
  23. [    0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
  24. [    0.000000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
  25. [    0.000000] PERCPU: Embedded 10 pages/cpu @8110e000 s8400 r8192 d24368 u40960
  26. [    0.000000] pcpu-alloc: s8400 r8192 d24368 u40960 alloc=10*4096
  27. [    0.000000] pcpu-alloc: [0] 0 [0] 1
  28. [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32512
  29. [    0.000000] Kernel command line: console=ttyS0,57600 rootfstype=squashfs,jffs2
  30. [    0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
  31. [    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
  32. [    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
  33. [    0.000000] Writing ErrCtl register=00018068
  34. [    0.000000] Readback ErrCtl register=00018068
  35. [    0.000000] Memory: 124712K/131072K available (3553K kernel code, 203K rwdata, 828K rodata, 204K init, 251K bss, 6360K reserved, 0K cma-reserved, 0K highmem)
  36. [    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
  37. [    0.000000] Hierarchical RCU implementation.
  38. [    0.000000]  RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
  39. [    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
  40. [    0.000000] NR_IRQS:256
  41. [    0.000000] clocksource: GIC: mask: 0xffffffffffffffff max_cycles: 0xcaf478abb4, max_idle_ns: 440795247997 ns
  42. [    0.000000] sched_clock: 32 bits at 100 Hz, resolution 10000000ns, wraps every 21474836475000000ns
  43. [    0.010000] Calibrating delay loop... 586.13 BogoMIPS (lpj=2930688)
  44. [    0.070000] pid_max: default: 32768 minimum: 301
  45. [    0.070000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
  46. [    0.080000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
  47. [    0.090000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
  48. [    0.090000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
  49. [    0.090000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
  50. [    0.090000] CPU1 revision is: 0001992f (MIPS 1004Kc)
  51. [    0.180000] Synchronize counters for CPU 1: done.
  52. [    0.190000] Brought up 2 CPUs
  53. [    0.190000] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  54. [    0.200000] futex hash table entries: 512 (order: 2, 16384 bytes)
  55. [    0.210000] pinctrl core: initialized pinctrl subsystem
  56. [    0.220000] NET: Registered protocol family 16
  57. [    0.230000] FPU Affinity set after 8840 emulations
  58. [    0.260000] pull PCIe RST: RALINK_RSTCTRL = 0
  59. [    0.560000] release PCIe RST: RALINK_RSTCTRL = 7000000
  60. [    0.570000] ***** Xtal 40MHz *****
  61. [    0.570000] release PCIe RST: RALINK_RSTCTRL = 7000000
  62. [    0.580000] Port 0 N_FTS = 1b105000
  63. [    0.580000] Port 1 N_FTS = 1b102800
  64. [    0.590000] Port 2 N_FTS = 1b105000
  65. [    1.740000] PCIE1 no card, disable it(RST&CLK)
  66. [    1.750000]  -> 12007f2
  67. [    1.750000] PCIE0 enabled
  68. [    1.760000] PCIE2 enabled
  69. [    1.760000] PCI host bridge /pcie@1e140000 ranges:
  70. [    1.770000]  MEM 0x0000000060000000..0x000000006fffffff
  71. [    1.780000]   IO 0x000000001e160000..0x000000001e16ffff
  72. [    1.790000] PCI coherence region base: 0x60000000, mask/settings: 0xf0000002
  73. [    1.830000] mt7621_gpio 1e000600.gpio: registering 32 gpios
  74. [    1.840000] mt7621_gpio 1e000600.gpio: registering 32 gpios
  75. [    1.850000] mt7621_gpio 1e000600.gpio: registering 32 gpios
  76. [    1.860000] PCI host bridge to bus 0000:00
  77. [    1.870000] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff]
  78. [    1.880000] pci_bus 0000:00: root bus resource [io  0xffffffff]
  79. [    1.890000] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
  80. [    1.910000] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
  81. [    1.920000] pci 0000:00:00.0: [0e8d:0801] type 01 class 0x060400
  82. [    1.920000] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x7fffffff]
  83. [    1.920000] pci 0000:00:00.0: reg 0x14: [mem 0x60300000-0x6030ffff]
  84. [    1.920000] pci 0000:00:00.0: supports D1
  85. [    1.920000] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
  86. [    1.920000] pci 0000:00:01.0: [0e8d:0801] type 01 class 0x060400
  87. [    1.920000] pci 0000:00:01.0: reg 0x10: [mem 0x00000000-0x7fffffff]
  88. [    1.920000] pci 0000:00:01.0: reg 0x14: [mem 0x60310000-0x6031ffff]
  89. [    1.920000] pci 0000:00:01.0: supports D1
  90. [    1.920000] pci 0000:00:01.0: PME# supported from D0 D1 D3hot
  91. [    1.920000] pci 0000:01:00.0: [14c3:7662] type 00 class 0x028000
  92. [    1.920000] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x000fffff 64bit]
  93. [    1.920000] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
  94. [    1.920000] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
  95. [    1.920000] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
  96. [    1.930000] pci 0000:02:00.0: [14c3:7603] type 00 class 0x028000
  97. [    1.930000] pci 0000:02:00.0: reg 0x10: [mem 0x00000000-0x000fffff]
  98. [    1.930000] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
  99. [    1.930000] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02
  100. [    1.930000] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 02
  101. [    1.930000] pci 0000:00:00.0: BAR 0: no space for [mem size 0x80000000]
  102. [    1.940000] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x80000000]
  103. [    1.950000] pci 0000:00:01.0: BAR 0: no space for [mem size 0x80000000]
  104. [    1.970000] pci 0000:00:01.0: BAR 0: failed to assign [mem size 0x80000000]
  105. [    1.980000] pci 0000:00:00.0: BAR 8: assigned [mem 0x60000000-0x600fffff]
  106. [    1.990000] pci 0000:00:00.0: BAR 9: assigned [mem 0x60100000-0x601fffff pref]
  107. [    2.010000] pci 0000:00:01.0: BAR 8: assigned [mem 0x60200000-0x602fffff]
  108. [    2.020000] pci 0000:00:00.0: BAR 1: assigned [mem 0x60300000-0x6030ffff]
  109. [    2.030000] pci 0000:00:01.0: BAR 1: assigned [mem 0x60310000-0x6031ffff]
  110. [    2.050000] pci 0000:01:00.0: BAR 0: assigned [mem 0x60000000-0x600fffff 64bit]
  111. [    2.060000] pci 0000:01:00.0: BAR 6: assigned [mem 0x60100000-0x6010ffff pref]
  112. [    2.080000] pci 0000:00:00.0: PCI bridge to [bus 01]
  113. [    2.090000] pci 0000:00:00.0:   bridge window [mem 0x60000000-0x600fffff]
  114. [    2.100000] pci 0000:00:00.0:   bridge window [mem 0x60100000-0x601fffff pref]
  115. [    2.110000] pci 0000:02:00.0: BAR 0: assigned [mem 0x60200000-0x602fffff]
  116. [    2.130000] pci 0000:00:01.0: PCI bridge to [bus 02]
  117. [    2.140000] pci 0000:00:01.0:   bridge window [mem 0x60200000-0x602fffff]
  118. [    2.150000] BAR0 at slot 0 = 0
  119. [    2.160000] bus=0x0, slot = 0x0
  120. [    2.160000] BAR0 at slot 1 = 0
  121. [    2.170000] bus=0x0, slot = 0x1
  122. [    2.180000] bus=0x1, slot = 0x0, irq=0xff
  123. [    2.180000] bus=0x2, slot = 0x1, irq=0xff
  124. [    2.190000] clocksource: Switched to clocksource GIC
  125. [    2.200000] NET: Registered protocol family 2
  126. [    2.210000] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
  127. [    2.220000] TCP bind hash table entries: 1024 (order: 1, 8192 bytes)
  128. [    2.230000] TCP: Hash tables configured (established 1024 bind 1024)
  129. [    2.240000] UDP hash table entries: 256 (order: 1, 8192 bytes)
  130. [    2.260000] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
  131. [    2.270000] NET: Registered protocol family 1
  132. [    2.280000] PCI: CLS 80 bytes, default 32
  133. [    2.280000] Crashlog allocated RAM at address 0x3f00000
  134. [    2.300000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  135. [    2.310000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
  136. [    2.330000] io scheduler noop registered
  137. [    2.340000] io scheduler deadline registered (default)
  138. [    2.350000] gpio-export gpio_export: 1 gpio(s) exported
  139. [    2.360000] Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled
  140. [    2.370000] console [ttyS0] disabled
  141. [    2.380000] 1e000c00.uartlite: ttyS0 at MMIO 0x1e000c00 (irq = 33, base_baud = 3125000) is a 16550A
  142. [    2.400000] console [ttyS0] enabled
  143. [    2.410000] bootconsole [early0] disabled
  144. [    2.430000] MediaTek Nand driver init, version v2.1 Fix AHB virt2phys error
  145. [    2.440000] Allocate 16 byte aligned buffer: 804e3130
  146. [    2.460000] Enable NFI Clock
  147. [    2.460000] # MTK NAND # : Use HW ECC
  148. [    2.470000] Device found in MTK table, ID: c2f1, EXT_ID: 801dc2
  149. [    2.480000] Support this Device in MTK table! c2f1
  150. [    2.490000] nand: device found, Manufacturer ID: 0xc2, Chip ID: 0xf1
  151. [    2.500000] nand: Macronix NAND 128MiB 3,3V 8-bit
  152. [    2.510000] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
  153. [    2.530000] [NAND]select ecc bit:4, sparesize :64 spare_per_sector=16
  154. [    2.540000] Scanning device for bad blocks
  155. [    2.570000] Bad eraseblock 91 at 0x000000b60000
  156. [    2.630000] Bad eraseblock 291 at 0x000002460000
  157. [    2.660000] Bad eraseblock 355 at 0x000002c60000
  158. [    2.730000] Bad eraseblock 612 at 0x000004c80000
  159. [    2.760000] Bad eraseblock 684 at 0x000005580000
  160. [    2.830000] Bad eraseblock 892 at 0x000006f80000
  161. [    2.870000] 22 ofpart partitions found on MTD device MT7621-NAND
  162. [    2.880000] Creating 22 MTD partitions on "MT7621-NAND":
  163. [    2.890000] 0x000000000000-0x000000100000 : "u-boot"
  164. [    2.900000] 0x000000100000-0x000000200000 : "SC PID"
  165. [    2.910000] 0x000000200000-0x000000600000 : "kernel"
  166. [    2.920000] 0x000000600000-0x000002200000 : "ubi"
  167. [    2.940000] 0x000002200000-0x000002400000 : "ENG UI"
  168. [    2.950000] 0x000002400000-0x000002600000 : "ML1"
  169. [    2.960000] 0x000002600000-0x000002800000 : "ML2"
  170. [    2.970000] 0x000002800000-0x000002a00000 : "ML3"
  171. [    2.980000] 0x000002a00000-0x000002c00000 : "ML4"
  172. [    2.990000] 0x000002c00000-0x000002e00000 : "ML5"
  173. [    3.000000] 0x000002e00000-0x000002f00000 : "factory"
  174. [    3.010000] 0x000002f00000-0x000003000000 : "SC Private Data"
  175. [    3.020000] 0x000003000000-0x000003200000 : "POT"
  176. [    3.030000] 0x000003200000-0x000003400000 : "Traffic Meter"
  177. [    3.050000] 0x000003400000-0x000003600000 : "DPF"
  178. [    3.060000] 0x000003600000-0x000003800000 : "SC Nvram"
  179. [    3.070000] 0x000003800000-0x000003a00000 : "Ralink Nvram"
  180. [    3.080000] 0x000003a00000-0x000003c00000 : "Ralink Reserved"
  181. [    3.090000] 0x000003c00000-0x000003e00000 : "ML6"
  182. [    3.100000] 0x000003e00000-0x000003f00000 : "Upgrade Flag"
  183. [    3.110000] 0x000004000000-0x000004200000 : "Reserved Block3"
  184. [    3.130000] 0x000004200000-0x000007e00000 : "Reserved Block4"
  185. [    3.140000] [mtk_nand] probe successfully!
  186. [    3.150000] Signature matched and data read!
  187. [    3.160000] load_fact_bbt success 1023
  188. [    3.170000] netif_napi_add() called with weight 128 on device eth%d
  189. [    3.190000] mtk_soc_eth 1e100000.ethernet: generated random MAC address 6a:26:c3:ea:d0:c1
  190. [    3.210000] libphy: mdio: probed
  191. [    4.610000] mtk_soc_eth 1e100000.ethernet: loaded mt7530 driver
  192. [    4.630000] mtk_soc_eth 1e100000.ethernet eth0: mediatek frame engine at 0xbe100000, irq 10
  193. [    4.640000] mt7621_wdt 1e000100.wdt: Initialized
  194. [    4.660000] NET: Registered protocol family 10
  195. [    4.670000] NET: Registered protocol family 17
  196. [    4.670000] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
  197. [    4.700000] 8021q: 802.1Q VLAN Support v1.8
  198. [    4.710000] UBI: auto-attach mtd3
  199. [    4.720000] ubi0: attaching mtd3
  200. [    4.760000] UBI: EOF marker found, PEBs from 30 will be erased
  201. [    4.770000] ubi0: scanning is finished
  202. [    4.810000] ubi0: volume 1 ("rootfs_data") re-sized from 9 to 172 LEBs
  203. [    4.830000] ubi0: attached mtd3 (name "ubi", size 28 MiB)
  204. [    4.840000] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
  205. [    4.850000] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
  206. [    4.870000] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
  207. [    4.880000] ubi0: good PEBs: 223, bad PEBs: 1, corrupted PEBs: 0
  208. [    4.890000] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
  209. [    4.910000] ubi0: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number: 2064160227
  210. [    4.920000] ubi0: available PEBs: 0, total reserved PEBs: 223, PEBs reserved for bad PEB handling: 19
  211. [    4.940000] ubi0: background thread "ubi_bgt0d" started, PID 380
  212. [    4.960000] block ubiblock0_0: created from ubi0:0(rootfs)
  213. [    4.970000] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem
  214. [    4.980000] hctosys: unable to open rtc device (rtc0)
  215. [    5.010000] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
  216. [    5.020000] Freeing unused kernel memory: 204K (8047d000 - 804b0000)
  217. [    5.850000] init: Console is alive
  218. [    5.860000] init: - watchdog -
  219. [    6.170000] mtk_soc_eth 1e100000.ethernet eth0: port 4 link up
  220. [    6.330000] mtk_soc_eth 1e100000.ethernet eth0: port 1 link up
  221. [    6.630000] kmodloader: loading kernel modules from /etc/modules-boot.d/*
  222. [    6.720000] usbcore: registered new interface driver usbfs
  223. [    6.730000] usbcore: registered new interface driver hub
  224. [    6.750000] usbcore: registered new device driver usb
  225. [    6.760000] exFAT: Version 1.2.9
  226. [    6.790000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  227. [    6.800000] ehci-platform: EHCI generic platform driver
  228. [    6.810000] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
  229. [    6.830000] init: - preinit -
  230. [    7.220000] random: procd: uninitialized urandom read (4 bytes read, 12 bits of entropy available)
  231. [    9.330000] UBIFS (ubi0:1): default file-system created
  232. [    9.340000] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 470
  233. [    9.460000] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
  234. [    9.470000] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
  235. [    9.490000] UBIFS (ubi0:1): FS size: 20570112 bytes (19 MiB, 162 LEBs), journal size 1015809 bytes (0 MiB, 8 LEBs)
  236. [    9.510000] UBIFS (ubi0:1): reserved for root: 971576 bytes (948 KiB)
  237. [    9.520000] UBIFS (ubi0:1): media format: w4/r0 (latest is w4/r0), UUID 888A7BCD-AB77-484D-B7EB-7DAE5BFABBC8, small LPT model
  238. [    9.550000] mount_root: overlay filesystem has not been fully initialized yet
  239. [    9.570000] mount_root: switching to ubifs overlay
  240. [    9.590000] urandom-seed: Seed file not found (/etc/urandom.seed)
  241. [    9.730000] procd: - early -
  242. [    9.740000] procd: - watchdog -
  243. [   10.390000] procd: - ubus -
  244. [   10.490000] random: ubusd: uninitialized urandom read (4 bytes read, 18 bits of entropy available)
  245. [   10.510000] random: ubusd: uninitialized urandom read (4 bytes read, 18 bits of entropy available)
  246. [   10.520000] random: ubusd: uninitialized urandom read (4 bytes read, 18 bits of entropy available)
  247. [   10.540000] random: ubusd: uninitialized urandom read (4 bytes read, 19 bits of entropy available)
  248. [   10.560000] random: ubusd: uninitialized urandom read (4 bytes read, 19 bits of entropy available)
  249. [   10.580000] random: ubusd: uninitialized urandom read (4 bytes read, 19 bits of entropy available)
  250. [   10.600000] random: ubusd: uninitialized urandom read (4 bytes read, 19 bits of entropy available)
  251. [   10.610000] procd: - init -
  252. [   10.880000] kmodloader: loading kernel modules from /etc/modules.d/*
  253. [   10.900000] ntfs: driver 2.1.32 [Flags: R/O MODULE].
  254. [   10.920000] ip6_tables: (C) 2000-2006 Netfilter Core Team
  255. [   10.940000] Loading modules backported from Linux version wt-2017-01-31-0-ge882dff19e7f
  256. [   10.950000] Backport generated by backports.git backports-20160324-13-g24da7d3c
  257. [   11.000000] mt7603e 0000:02:00.0: ASIC revision: 76030010
  258. [   11.010000] mt7603e 0000:02:00.0: Invalid MAC address, using random address c6:b1:e4:df:8a:a3
  259. [   13.110000] mt7603e 0000:02:00.0: Firmware Version: _mt7603mp
  260. [   13.120000] mt7603e 0000:02:00.0: Build Time: 20151020155902
  261. [   13.170000] firmware init done
  262. [   13.330000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
  263. [   13.340000] mt76x2e 0000:01:00.0: ASIC revision: 76120044
  264. [   13.350000] mt76x2e 0000:01:00.0: EEPROM data check failed: ffff
  265. [   13.370000] mt76x2e 0000:01:00.0: Invalid MAC address, using random address 56:ef:53:1f:84:97
  266. [   13.400000] mt76x2e 0000:01:00.0: ROM patch already applied
  267. [   13.490000] mt76x2e 0000:01:00.0: Firmware Version: 0.0.00
  268. [   13.500000] mt76x2e 0000:01:00.0: Build: 1
  269. [   13.510000] mt76x2e 0000:01:00.0: Build Time: 201507311614____
  270. [   13.540000] mt76x2e 0000:01:00.0: Firmware running!
  271. [   13.550000] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
  272. [   13.560000] ip_tables: (C) 2000-2006 Netfilter Core Team
  273. [   13.580000] nf_conntrack version 0.5.0 (1951 buckets, 7804 max)
  274. [   13.630000] xt_time: kernel timezone is -0000
  275. [   13.650000] PPP generic driver version 2.4.2
  276. [   13.660000] NET: Registered protocol family 24
  277. [   13.680000] kmodloader: done loading kernel modules from /etc/modules.d/*
  278. [   14.880000] random: jshn: uninitialized urandom read (4 bytes read, 28 bits of entropy available)
  279. [   15.000000] random: jshn: uninitialized urandom read (4 bytes read, 28 bits of entropy available)
  280. [   22.180000] device eth0.1 entered promiscuous mode
  281. [   22.190000] device eth0 entered promiscuous mode
  282. [   22.210000] br-lan: port 1(eth0.1) entered forwarding state
  283. [   22.230000] br-lan: port 1(eth0.1) entered forwarding state
  284. [   24.230000] br-lan: port 1(eth0.1) entered forwarding state
  285. [   51.870000] random: nonblocking pool is initialized
  286. [  655.210000] mtk_soc_eth 1e100000.ethernet eth0: port 1 link down
  287. [ 1181.850000] mtk_soc_eth 1e100000.ethernet eth0: port 1 link up
RAW Paste Data
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy. OK, I Understand
 
Top