SHARE
TWEET

Untitled

a guest Aug 23rd, 2019 53 Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. # generated by PrusaSlicer 2.1.0-alpha1+linux64 on 2019-08-11 at 17:37:33
  2. bed_custom_model =
  3. bed_custom_texture =
  4. bed_shape = 0x0,160x0,160x160,0x160
  5. before_layer_gcode =
  6. between_objects_gcode =
  7. cooling_tube_length = 5
  8. cooling_tube_retraction = 91.5
  9. default_filament_profile = ""
  10. default_print_profile =
  11. deretract_speed = 0
  12. end_gcode = G91\nG1 E-2 F2700\nG1 E-2 Z0.2 F2400\nG1 X5 Y5 F3000\nG1 Z10\nG90\nM106 S0\nM104 S0\nM140 S0\nM84 X Y E
  13. extra_loading_move = -2
  14. extruder_colour = ""
  15. extruder_offset = 0x0
  16. gcode_flavor = marlin
  17. high_current_on_filament_swap = 0
  18. host_type = octoprint
  19. inherits =
  20. layer_gcode =
  21. machine_max_acceleration_e = 10000,5000
  22. machine_max_acceleration_extruding = 1500,1250
  23. machine_max_acceleration_retracting = 1500,1250
  24. machine_max_acceleration_x = 9000,1000
  25. machine_max_acceleration_y = 9000,1000
  26. machine_max_acceleration_z = 500,200
  27. machine_max_feedrate_e = 120,120
  28. machine_max_feedrate_x = 500,200
  29. machine_max_feedrate_y = 500,200
  30. machine_max_feedrate_z = 12,12
  31. machine_max_jerk_e = 2.5,2.5
  32. machine_max_jerk_x = 10,10
  33. machine_max_jerk_y = 10,10
  34. machine_max_jerk_z = 0.2,0.4
  35. machine_min_extruding_rate = 0,0
  36. machine_min_travel_rate = 0,0
  37. max_layer_height = 0
  38. max_print_height = 200
  39. min_layer_height = 0.07
  40. nozzle_diameter = 0.4
  41. parking_pos_retraction = 92
  42. print_host = 192.168.0.33
  43. printer_model =
  44. printer_notes = PRINTER_HAS_BOWDEN
  45. printer_settings_id =
  46. printer_technology = FFF
  47. printer_variant =
  48. printer_vendor =
  49. printhost_apikey =
  50. printhost_cafile =
  51. remaining_times = 0
  52. retract_before_travel = 2
  53. retract_before_wipe = 0%
  54. retract_layer_change = 0
  55. retract_length = 5
  56. retract_length_toolchange = 10
  57. retract_lift = 0
  58. retract_lift_above = 0
  59. retract_lift_below = 0
  60. retract_restart_extra = 0
  61. retract_restart_extra_toolchange = 0
  62. retract_speed = 45
  63. serial_port =
  64. serial_speed = 250000
  65. silent_mode = 1
  66. single_extruder_multi_material = 0
  67. start_gcode = M201 X500.00 Y500.00 Z100.00 E5000.00\nM203 X500.00 Y500.00 Z10.00 E50.00\nM204 P500.00 R1000.00 T500.00\nM205 X8.00 Y8.00 Z0.40 E5.00\nM220 S100\nM221 S100\nG28\nG92 E0\nG1 Z2.0 F3000\nG1 X10.1 Y20 Z0.28 F5000.0\nG1 X10.1 Y200.0 Z0.28 F1500.0 E15\nG1 X10.4 Y200.0 Z0.28 F5000.0\nG1 X10.4 Y20 Z0.28 F1500.0 E30\nG92 E0\nG1 Z2.0 F3000
  68. toolchange_gcode =
  69. use_firmware_retraction = 0
  70. use_relative_e_distances = 0
  71. use_volumetric_e = 0
  72. variable_layer_height = 1
  73. wipe = 0
  74. z_offset = 0
RAW Paste Data
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy. OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!
 
Top