Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] Initializing cgroup subsys cpuset
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Initializing cgroup subsys cpuacct
- [ 0.000000] Linux version 3.14.29-18-osmc (root@vero4k) (gcc version 4.9.2 (Debian/Linaro 4.9.2-10) ) #1 SMP Mon Jun 5 12:47:30 UTC 2017
- [ 0.000000] CPU: AArch64 Processor [410fd034] revision 4
- [ 0.000000] no prop version_code
- [ 0.000000] bootconsole [earlycon0] enabled
- [ 0.000000] fdt Reserved memory table:
- [ 0.000000] linux,meson-fb: 0x000000007e000000 - 0x0000000080000000 (32 MiB)
- [ 0.000000] linux,di: 0x000000007c200000 - 0x000000007e000000 (30 MiB)
- [ 0.000000] DI: DI reserved memory: created CMA memory pool at 0x000000007c200000, size 30 MiB
- [ 0.000000] linux,ion-dev: 0x0000000079200000 - 0x000000007c200000 (48 MiB)
- [ 0.000000] linux,ppmgr: 0x0000000079200000 - 0x0000000079200000 (0 MiB)
- [ 0.000000] linux,codec_mm_cma: 0x0000000067c00000 - 0x0000000073c00000 (192 MiB)
- [ 0.000000] linux,picdec: 0x0000000079200000 - 0x0000000079200000 (0 MiB)
- [ 0.000000] Reserved memory: incorrect alignment of CMA region
- [ 0.000000] linux,codec_mm_reserved: 0x0000000075100000 - 0x0000000079200000 (65 MiB)
- [ 0.000000] fdt Reserved memory total: 370 MiB
- [ 0.000000] cma: Reserved 8 MiB at 74800000
- [ 0.000000] On node 0 totalpages: 515072
- [ 0.000000] Normal zone: 9068 pages used for memmap
- [ 0.000000] Normal zone: 0 pages reserved
- [ 0.000000] Normal zone: 515072 pages, LIFO batch:31
- [ 0.000000] psci: probing function IDs from device-tree
- [ 0.000000] PERCPU: Embedded 11 pages/cpu @ffffffc0750a5000 s16256 r8192 d20608 u45056
- [ 0.000000] pcpu-alloc: s16256 r8192 d20608 u45056 alloc=11*4096
- [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 506004
- [ 0.000000] Kernel command line: rootfstype=ramfs init=/init console=ttyS0,115200 no_console_suspend earlyprintk=aml-uart,0xc81004c0 ramoops.pstore_en=1 ramoops.record_size=0x8000 ramoops.console_size=0x4000 androidboot.selinux=permissive logo=osd1,loaded,0x3d800000,1080p60hz maxcpus=4 vout=1080p60hz,enable hdmimode=1080p60hz cvbsmode=576cvbs hdmitx= cvbsdrv=0 androidboot.firstboot=0 jtag=apao androidboot.hardware=amlogic mac=C4:4E:AC:0A:AE:AE androidboot.mac=C4:4E:AC:0A:AE:AE root=/dev/vero-nand/root rootfstype=ext4 quiet console=tty0 osmcdev=vero3
- [ 0.000000] logo: osd1
- [ 0.000000] logo: loaded
- [ 0.000000] logo: 0x3d800000
- [ 0.000000] logo: 1080p60hz
- [ 0.000000] vout_serve: 1080p60hz
- [ 0.000000] vout_serve: en: 1
- [ 0.000000] logo: get hdmimode: 1080p60hz
- [ 0.000000] logo: get cvbsmode: 576cvbs
- [ 0.000000] tv_vout: cvbs performance line = 0
- [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
- [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
- [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
- [ 0.000000] Memory: 1646560K/2060288K available (7916K kernel code, 800K rwdata, 3044K rodata, 951K init, 5225K bss, 413728K reserved)
- [ 0.000000] Virtual kernel memory layout:
- vmalloc : 0xffffff8000000000 - 0xffffff8040000000 ( 1024 MB)
- vmemmap : 0xffffff8040010000 - 0xffffff8042380000 ( 35 MB)
- modules : 0xffffffbffc000000 - 0xffffffc000000000 ( 64 MB)
- memory : 0xffffffc000000000 - 0xffffffc07e000000 ( 2016 MB)
- .init : 0xffffffc001b36000 - 0xffffffc001c23f80 ( 952 kB)
- .text : 0xffffffc001080000 - 0xffffffc001b352e4 ( 10965 kB)
- .data : 0xffffffc001c24000 - 0xffffffc001cec3e0 ( 801 kB)
- [ 0.000000] PM: Registered nosave memory: [mem 0x01080000-0x01b34fff]
- [ 0.000000] SLUB: HWalign=64, Order=0-1, MinObjects=0, CPUs=4, Nodes=1
- [ 0.000000] arch_multi_cluster:0
- [ 0.000000] Hierarchical RCU implementation.
- [ 0.000000] RCU debugfs-based tracing is enabled.
- [ 0.000000] CONFIG_RCU_FANOUT set to non-default value of 32
- [ 0.000000] NR_IRQS:64 nr_irqs:64 0
- [ 0.000000] Architected cp15 timer(s) running at 24.00MHz (phys).
- [ 0.000003] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 2863311519744ns
- [ 0.000026] meson_bc_timer: mclk->mux_reg =ffffff800000c990,mclk->reg =ffffff800000e994
- [ 0.000290] Console: colour dummy device 80x25
- [ 0.000297] console [tty0] enabled
- [ 0.000302] bootconsole [earlycon0] disabled
- [ 0.002090] allocated 8388608 bytes of page_cgroup
- [ 0.002095] please try 'cgroup_disable=memory' option if you don't want memory cgroups
- [ 0.002108] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
- [ 0.002117] pid_max: default: 32768 minimum: 301
- [ 0.002251] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
- [ 0.002260] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
- [ 0.004218] device-tree: Duplicate name in /efusekey, renamed to "key0#1"
- [ 0.004233] device-tree: Duplicate name in /efusekey, renamed to "key1#1"
- [ 0.004240] device-tree: Duplicate name in /efusekey, renamed to "key2#1"
- [ 0.004248] device-tree: Duplicate name in /efusekey, renamed to "key3#1"
- [ 0.006833] Initializing cgroup subsys memory
- [ 0.006854] Initializing cgroup subsys devices
- [ 0.006861] Initializing cgroup subsys freezer
- [ 0.006866] Initializing cgroup subsys blkio
- [ 0.006871] Initializing cgroup subsys bfqio
- [ 0.006904] ftrace: allocating 28206 entries in 111 pages
- [ 0.034932] /cpus/cpu@0: Missing clock-frequency property
- [ 0.034950] /cpus/cpu@1: Missing clock-frequency property
- [ 0.034957] /cpus/cpu@2: Missing clock-frequency property
- [ 0.034964] /cpus/cpu@3: Missing clock-frequency property
- [ 0.035473] Meson chip version = RevA (21:A - 82:0)
- [ 0.035813] CPU1: Booted secondary processor
- [ 0.036166] CPU2: Booted secondary processor
- [ 0.036487] CPU3: Booted secondary processor
- [ 0.036550] Brought up 4 CPUs
- [ 0.036566] SMP: Total of 4 processors activated.
- [ 0.037019] devtmpfs: initialized
- [ 0.043672] instabooting: 0
- [ 0.049805] pinctrl core: initialized pinctrl subsystem
- [ 0.050041] regulator-dummy: no parameters
- [ 0.050403] NET: Registered protocol family 16
- [ 0.052217] aml_vdac_init: module init
- [ 0.052262] register canvas platform driver
- [ 0.052285] register rdma platform driver
- [ 0.053768] vdso: 2 pages (1 code, 1 data) at base ffffffc001c2c000
- [ 0.055243] DMA: preallocated 4096 KiB pool for atomic allocations
- [ 0.056189] software IO TLB [mem 0x64400000-0x64800000] (4MB) mapped at [ffffffc064400000-ffffffc0647fffff]
- [ 0.056324] i2c-core: driver [pmu4] using legacy resume method
- [ 0.056345] codec_mm:codec_mm_module_init
- [ 0.056561] gxbb_mpll_clk: register mpll_clk_out0 success done
- [ 0.056572] gxbb_mpll_clk: register mpll_clk_out1 success done
- [ 0.056582] gxbb_mpll_clk: register mpll_clk_out2 success done
- [ 0.056767] clk_sys: register PLL sys_pll success done
- [ 0.056779] gxl_clk: [ xtal ] ->clockrate: 24000000Hz
- [ 0.056784] gxl_clk: [ 32Khz ] ->clockrate: 32000Hz
- [ 0.056789] gxl_clk: [ clk81 ] ->clockrate: 166666666Hz
- [ 0.056794] gxl_clk: [ fixed_pll ] ->clockrate: 2000000000Hz
- [ 0.056798] gxl_clk: [ fclk_div2 ] ->clockrate: 1000000000Hz
- [ 0.056803] gxl_clk: [ fclk_div3 ] ->clockrate: 666666666Hz
- [ 0.056807] gxl_clk: [ fclk_div4 ] ->clockrate: 500000000Hz
- [ 0.056811] gxl_clk: [ fclk_div5 ] ->clockrate: 400000000Hz
- [ 0.056815] gxl_clk: [ fclk_div7 ] ->clockrate: 285714285Hz
- [ 0.056840] gxl_clk: clock initialization complete
- [ 0.057022] clkmsr: Gxl msr_clk_reg0=ffffff800041c75c,msr_clk_reg2=ffffff800041e764
- [ 0.058416] aml_iomap: amlogic iomap probe done
- [ 0.058659] pinmux-gxl c1109880.pinmux: Init pinux probe!
- [ 0.059430] pinmux-gxl c1109880.pinmux: Probed amlogic pinctrl driver
- [ 0.059629] genirq: Setting trigger mode 8 for irq 241 failed (gic_set_type+0x0/0xc4)
- [ 0.059652] genirq: Setting trigger mode 8 for irq 242 failed (gic_set_type+0x0/0xc4)
- [ 0.059722] genirq: Setting trigger mode 8 for irq 241 failed (gic_set_type+0x0/0xc4)
- [ 0.059739] genirq: Setting trigger mode 8 for irq 242 failed (gic_set_type+0x0/0xc4)
- [ 0.062848] codec_mm has 2 memory regions
- [ 0.062866] codec_mm codec_mm.18: assigned reserved memory node linux,codec_mm_cma ok
- [ 0.062876] codec_mm codec_mm.18: assigned reserved memory node linux,codec_mm_reserved ok
- [ 0.062907] codec_mm has 2 memory regions
- [ 0.062915] codec_mm codec_mm.18: assigned reserved memory node linux,codec_mm_cma ok
- [ 0.062923] codec_mm codec_mm.18: assigned reserved memory node linux,codec_mm_reserved ok
- [ 0.063611] vpu: driver version: v02
- [ 0.063626] vpu: load vpu_clk: 666667000Hz(7)
- [ 0.063652] vpu: vpu_probe OK
- [ 0.064274] tv_vout: tvout_probe
- [ 0.064284] tv_vout: major number 254 for disp
- [ 0.064288] vout_notify: vout_register_server
- [ 0.064292] tv_vout: register tv module server ok
- [ 0.064314] tv_vout: tvout_probe OK
- [ 0.064541] canvas_probe reg=00000000c8838000,size=400
- [ 0.064553] canvas maped reg_base =ffffff800043e000
- [ 0.068117] rdma_probe
- [ 0.232348] bio: create slab <bio-0> at 0
- [ 0.232799] SCSI subsystem initialized
- [ 0.232973] usbcore: registered new interface driver usbfs
- [ 0.233008] usbcore: registered new interface driver hub
- [ 0.233066] usbcore: registered new device driver usb
- [ 0.233646] i2c-gpio i2c_gpio.36: using pins 172 (SDA) and 173 (SCL)
- [ 0.233723] pps_core: LinuxPPS API ver. 1 registered
- [ 0.233728] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
- [ 0.233741] PTP clock support registered
- [ 0.233899] hdmitx: system: amhdmitx_init
- [ 0.233904] hdmitx: system: Ver: 2014May6
- [ 0.234036] hdmitx: system: amhdmitx_probe
- [ 0.234218] hdmitx: system: not find match init-data
- [ 0.234223] hdmitx: system: not find match pwr-ctl
- [ 0.234228] hdmitx hpd irq = 89
- [ 0.234461] hdmitx20: Mapped PHY: 0xc0800000
- [ 0.234470] hdmitx20: Mapped PHY: 0xc1104400
- [ 0.234490] hdmitx20: Mapped PHY: 0xc8100000
- [ 0.234495] hdmitx20: Mapped PHY: 0xc8834000
- [ 0.234500] hdmitx20: Mapped PHY: 0xc883a000
- [ 0.234505] hdmitx20: Mapped PHY: 0xc883c000
- [ 0.234512] hdmitx20: Mapped PHY: 0xd0100000
- [ 0.234518] hdmitx20: Mapped PHY: 0xda83a000
- [ 0.234529] hdmitx: alread display in uboot 0x10
- [ 0.234550] avmute set to 1
- [ 0.234704] vout_serve: vout_init_module
- [ 0.234828] tv_vout: tv_set_current_vmode[764]fps_target_mode=16
- [ 0.234834] tv_vout: mode is 16,sync_duration_den=1,sync_duration_num=60
- [ 0.234842] tv_vout: already display in uboot
- [ 0.234845] vout_serve: vinfo mode is: 1080p60hz
- [ 0.234849] vout_serve: init mode 1080p60hz
- [ 0.234871] vout_serve: create vout attribute OK
- [ 0.234875] vout_serve: meson_vout_probe OK
- [ 0.234971] logo: logo_init
- [ 0.235196] osd_rdma: osd_rdma_init: rdma_table p=0x74c01000,op=0x74c01000 , v=0xffffff8000471000
- [ 0.235202] osd_rdma: osd rdma request irq as second interrput function!
- [ 0.235267] Advanced Linux Sound Architecture Driver Initialized.
- [ 0.237280] Switched to clocksource arch_sys_counter
- [ 0.241512] hdmitx: system: irq 80000002
- [ 0.247628] FS-Cache: Loaded
- [ 0.251889] NET: Registered protocol family 2
- [ 0.252388] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
- [ 0.252530] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
- [ 0.252779] TCP: Hash tables configured (established 16384 bind 16384)
- [ 0.252844] TCP: reno registered
- [ 0.252856] UDP hash table entries: 1024 (order: 3, 32768 bytes)
- [ 0.252898] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
- [ 0.253094] NET: Registered protocol family 1
- [ 0.253308] RPC: Registered named UNIX socket transport module.
- [ 0.253315] RPC: Registered udp transport module.
- [ 0.253319] RPC: Registered tcp transport module.
- [ 0.253323] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 0.253495] aml_wifi wifi.31: [wifi_dev_probe] no power_on_pin2
- [ 0.253502] aml_wifi wifi.31: [wifi_dev_probe] set pwm as 32k output
- [ 0.253557] aml_wifi wifi.31: [wifi_dev_probe] interrupt_pin=241
- [ 0.253564] aml_wifi wifi.31: [wifi_dev_probe] irq_num=100, irq_trigger_type=1
- [ 0.253570] aml_wifi wifi.31: [wifi_dev_probe] power_on_pin=240
- [ 0.253575] aml_wifi wifi.31: [wifi_dev_probe] clock_32k_pin=0
- [ 0.253714] aml_wifi wifi.31: [wifi_setup_dt] wifi_setup_dt
- [ 0.253742] aml_wifi wifi.31: [wifi_setup_dt] interrupt_pin(241)
- [ 0.253756] aml_wifi wifi.31: [wifi_setup_dt] power_on_pin(240)
- [ 0.253872] Unpacking initramfs...
- [ 0.330595] Freeing initrd memory: 2096K (ffffffc073cab000 - ffffffc073eb7000)
- [ 0.332705] futex hash table entries: 1024 (order: 4, 65536 bytes)
- [ 0.338807] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- [ 0.339238] FS-Cache: Netfs 'nfs' registered for caching
- [ 0.339772] NFS: Registering the id_resolver key type
- [ 0.339801] Key type id_resolver registered
- [ 0.339805] Key type id_legacy registered
- [ 0.339815] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
- [ 0.339827] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
- [ 0.340525] msgmni has been set to 3620
- [ 0.341366] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
- [ 0.341440] io scheduler noop registered
- [ 0.341553] io scheduler bfq registered (default)
- [ 0.341557] BFQ I/O-scheduler: v7r8
- [ 0.342293] meson-rng c8834000.rng: hwrng registered
- [ 0.344496] loop: module loaded
- [ 0.344556] Loading iSCSI transport class v2.0-870.
- [ 0.344775] iscsi: registered transport (tcp)
- [ 0.345494] tun: Universal TUN/TAP device driver, 1.6
- [ 0.345499] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- [ 0.349068] libphy: stmmac: probed
- [ 0.349080] eth0: PHY ID 01814400 at 8 IRQ POLL (stmmac-0:08) active
- [ 0.349376] PPP generic driver version 2.4.2
- [ 0.349493] NET: Registered protocol family 24
- [ 0.349549] usbcore: registered new interface driver smsc95xx
- [ 0.349764] platform c9000000.dwc3: Driver dwc3 requests probe deferral
- [ 0.349806] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 0.349811] ehci-h20ahb: H20AHB-EHCI Host Controller driver
- [ 0.349889] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 0.350026] usbcore: registered new interface driver usb-storage
- [ 0.350122] usbcore: registered new interface driver usbserial
- [ 0.350146] usbcore: registered new interface driver usbserial_generic
- [ 0.350170] usbserial: USB Serial support registered for generic
- [ 0.350193] usbcore: registered new interface driver pl2303
- [ 0.350214] usbserial: USB Serial support registered for pl2303
- [ 0.350441] amlogic-new-usb2 d0078000.usb2phy: USB2 phy probe:phy_mem:0xd0078000, iomap phy_base:0xffffff800047e000
- [ 0.350532] amlogic-new-usb3 d0078080.usb3phy: This phy has no usb port
- [ 0.350556] amlogic-new-usb3 d0078080.usb3phy: USB3 phy probe:phy_mem:0xd0078080, iomap phy_base:0xffffff8000582080
- [ 0.350716] mousedev: PS/2 mouse device common for all mice
- [ 0.350782] i2c /dev entries driver
- [ 0.351202] device-mapper: uevent: version 1.0.3
- [ 0.351413] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
- [ 0.351700] device-mapper: multipath: version 1.6.0 loaded
- [ 0.351709] device-mapper: multipath round-robin: version 1.0.0 loaded
- [ 0.351884] ledtrig-cpu: registered to indicate activity on CPUs
- [ 0.351931] hidraw: raw HID events driver (C) Jiri Kosina
- [ 0.352659] usbcore: registered new interface driver usbhid
- [ 0.352665] usbhid: USB HID core driver
- [ 0.352886] meson_uart c81004c0.serial: ==uart0 reg addr = ffffff80005844c0
- [ 0.352910] c81004c0.serial: ttyS0 at MMIO 0xc81004c0 (irq = 225, base_baud = 1500000) is a meson_uart
- [ 0.352923] meson_uart c81004c0.serial: ttyS0 use xtal(8M) 24000000 change 0 to 115200
- [ 0.391826] console [ttyS0] enabled
- [ 0.392088] meson_uart c11084c0.serial: ==uart1 reg addr = ffffff80005864c0
- [ 0.392108] c11084c0.serial: ttyS1 at MMIO 0xc11084c0 (irq = 58, base_baud = 1500000) is a meson_uart
- [ 0.392473] hdmitx: system: hdmitx_hdcp_init
- [ 0.392572] ESM HLD: Initializing...
- [ 0.392578] ESM HLD: Registering device range 'esm'...
- [ 0.392587] ESM HLD: Device range 'esm' has been registered.
- [ 0.392591] ESM HLD: Creating class /sys/class/elliptic...
- [ 0.392611] ESM HLD: The class /sys/class/elliptic has been created.
- [ 0.392615] ESM HLD: Creating device 'esm'...
- [ 0.392683] ESM HLD: Device 'esm' has been created.
- [ 0.392687] ESM HLD: Done initializing the HLD driver.
- [ 0.407617] aml_vrtc rtc.30: rtc core: registered aml_vrtc as rtc0
- [ 0.407857] secmon has 1 memory regions
- [ 0.407886] secmon: share in base: 0xffffff800058e000, share out base: 0xffffff800059a000
- [ 0.407894] secmon secmon.4: assigned reserved memory node linux,secmon ok
- [ 0.407898] secmon: probe done
- [ 0.408022] storage: storage in base: 0xffffff8001a00000
- [ 0.408026] storage: storage out base: 0xffffff8001a80000
- [ 0.408030] storage: storage block base: 0xffffff8001b00000
- [ 0.408033] storage: probe done!
- [ 0.408210] aml_sd_emmc_probe: line 3558
- [ 0.408215] mmc driver version: 1.07, 2015-01-21: fix a bug in tuning which caused eMMC data CRC error
- [ 0.408532] aml_sd_emmc_reg_init 1146
- [ 0.408589] get property: ocr_avail, value:0x00200080
- [ 0.408594] get property: f_min, value:300000
- [ 0.408599] get property: f_max, value:100000000
- [ 0.408604] get property: max_req_size, value:0x00020000
- [ 0.408612] get property: pinname, str:emmc
- [ 0.408618] get property: card_type, value:1
- [ 0.408631] get property: gpio_dat3, str:
- [ 0.408636] get property: hw_reset, str:
- [ 0.408677] emmc:pdata->caps = c0000d47
- [ 0.408686] emmc:pdata->caps2 = 18060
- [ 0.408695] storage 1, boot 1
- [ 0.447293] [aml_sd_emmc_probe] aml_sd_emmc_probe() success!
- [ 0.452569] aml_sd_emmc_probe: line 3558
- [ 0.452915] aml_sd_emmc_reg_init 1146
- [ 0.452974] get property: ocr_avail, value:0x00200080
- [ 0.452979] get property: f_min, value:400000
- [ 0.452984] get property: f_max, value:100000000
- [ 0.452989] get property: max_req_size, value:0x00020000
- [ 0.452993] get property: irq_in, value:3
- [ 0.452998] get property: irq_out, value:5
- [ 0.453011] get property: gpio_cd, str:
- [ 0.453017] get property: pinname, str:sd
- [ 0.453022] get property: jtag_pin, str:
- [ 0.453027] get property: card_type, value:5
- [ 0.453033] get property: gpio_dat3, str:
- [ 0.453053] sd:pdata->caps = 7
- [ 0.453057] sd:pdata->caps2 = 0
- [ 0.487473] [aml_is_card_insert] card OUT
- [ 0.487538] [aml_is_card_insert] card OUT
- [ 0.487551] [aml_sd_emmc_probe] aml_sd_emmc_probe() success!
- [ 0.487579] aml_sd_emmc_probe: line 3558
- [ 0.487778] aml_sd_emmc_reg_init 1146
- [ 0.487831] get property: ocr_avail, value:0x00200080
- [ 0.487836] get property: f_min, value:400000
- [ 0.487840] get property: f_max, value:200000000
- [ 0.487845] get property: max_req_size, value:0x00020000
- [ 0.487853] get property: pinname, str:sdio
- [ 0.487858] get property: card_type, value:3
- [ 0.487907] sdio:pdata->caps = 7810f
- [ 0.487911] sdio:pdata->caps2 = 0
- [ 0.491387] emmc: BKOPS_EN bit is not set
- [ 0.497654] emmc: trying cali 0-th time(s)
- [ 0.502001] emmc: delay[0]= 2800 padding= 1, bidx=2
- [ 0.502007] emmc: delay[1]= 3200 padding= 4, bidx=3
- [ 0.502011] emmc: delay[2]= 2600 padding= 2, bidx=2
- [ 0.502016] emmc: delay[3]= 3400 padding= 3, bidx=3
- [ 0.502020] emmc: delay[4]= 3400 padding= 3, bidx=3
- [ 0.502025] emmc: delay[5]= 2800 padding= 1, bidx=2
- [ 0.502029] emmc: delay[6]= 3200 padding= 4, bidx=3
- [ 0.502034] emmc: delay[7]= 3200 padding= 4, bidx=3
- [ 0.502038] emmc: calibration result @ 0: max(3400), min(2600)
- [ 0.502044] emmc: line_delay =0x11300413, max_cal_result =3400
- [ 0.502047] emmc: base_index_max 3, base_index_min 2
- [ 0.502054] emmc: clk 100000000 SDR mode tuning start
- [ 0.502314] emmc: rx_tuning_result[0] = 10
- [ 0.502568] emmc: rx_tuning_result[1] = 10
- [ 0.502822] emmc: rx_tuning_result[2] = 10
- [ 0.503076] emmc: rx_tuning_result[3] = 10
- [ 0.503330] emmc: rx_tuning_result[4] = 10
- [ 0.503584] emmc: rx_tuning_result[5] = 10
- [ 0.503838] emmc: rx_tuning_result[6] = 10
- [ 0.504092] emmc: rx_tuning_result[7] = 10
- [ 0.504344] emmc: rx_tuning_result[8] = 10
- [ 0.504598] emmc: rx_tuning_result[9] = 10
- [ 0.504603] emmc: best_win_start =0, best_win_size =10
- [ 0.504608] emmc: sd_emmc_regs->gclock=0x100024a,sd_emmc_regs->gadjust=0x2000
- [ 0.504614] emmc: gclock =0x100024a, gdelay=0x11300413, gadjust=0x2000
- [ 0.504665] emmc: new HS200 MMC card at address 0001
- [ 0.504670] emmc: clock 100000000, 8-bit-bus-width
- [ 0.505017] mmcblk0: emmc:0001 016G92 14.6 GiB
- [ 0.505153] mmcblk0boot0: emmc:0001 016G92 partition 1 4.00 MiB
- [ 0.505334] mmcblk0boot1: emmc:0001 016G92 partition 2 4.00 MiB
- [ 0.505467] mmcblk0gp0: emmc:0001 016G92 partition 4 8.00 MiB
- [ 0.505608] mmcblk0rpmb: emmc:0001 016G92 partition 3 512 KiB
- [ 0.506170] mmcblk0: unknown partition table
- [ 0.506733] [mmc_read_partition_tbl] mmc read partition OK!
- [ 0.506739] add_emmc_partition
- [ 0.506869] [mmcblk0p01] bootloader offset 0x000000000000, size 0x000000400000
- [ 0.506952] [mmcblk0p02] reserved offset 0x000002400000, size 0x000004000000
- [ 0.507040] [mmcblk0p03] cache offset 0x000006c00000, size 0x000020000000
- [ 0.507122] [mmcblk0p04] env offset 0x000027400000, size 0x000000800000
- [ 0.507203] [mmcblk0p05] logo offset 0x000028400000, size 0x000002000000
- [ 0.507335] [mmcblk0p06] recovery offset 0x00002ac00000, size 0x000002000000
- [ 0.507442] [mmcblk0p07] rsv offset 0x00002d400000, size 0x000000800000
- [ 0.507535] [mmcblk0p08] tee offset 0x00002e400000, size 0x000000800000
- [ 0.507614] [mmcblk0p09] crypt offset 0x00002f400000, size 0x000002000000
- [ 0.507697] [mmcblk0p10] misc offset 0x000031c00000, size 0x000002000000
- [ 0.507783] [mmcblk0p11] instaboot offset 0x000034400000, size 0x000020000000
- [ 0.507865] [mmcblk0p12] boot offset 0x000054c00000, size 0x000002000000
- [ 0.507948] [mmcblk0p13] system offset 0x000057400000, size 0x000040000000
- [ 0.508031] [mmcblk0p14] data offset 0x000097c00000, size 0x000313400000
- [ 0.508055] card key: card_blk_probe.
- [ 0.508061] emmc_key_init:527 emmc key lba_start:0x12020,lba_end:0x12220
- [ 0.508066] emmc key: emmc_key_init:552 ok.
- [ 0.508071] amlmmc_dtb_init: register dtb chardev
- [ 0.508149] amlmmc_dtb_init: register dtb chardev OK
- [ 0.508173] Exit aml_emmc_partition_ops OK.
- [ 0.509060] mmcblk0gp0: unknown partition table
- [ 0.510083] mmcblk0boot1: unknown partition table
- [ 0.511080] mmcblk0boot0: unknown partition table
- [ 0.511235] clear_emmc_wait_flag
- [ 0.527299] [aml_sd_emmc_probe] aml_sd_emmc_probe() success!
- [ 0.527492] ion_dev has 1 memory regions
- [ 0.531232] fb: osd_init_module
- [ 0.531326] fb: viu vsync irq: 35
- [ 0.531334] meson-fb has 1 memory regions
- [ 0.531361] meson-fb meson-fb.15: assigned reserved memory node linux,meson-fb ok
- [ 0.531375] fb: osd_probe vinfo:ffffffc001c9f828
- [ 0.531381] fb: init fbdev bpp is:32
- [ 0.531848] fb: Frame buffer memory assigned at
- [ 0.531848] fb: 0, phy: 0x000000007e000000, vir:0xffffff8001d00000, size=24576K
- [ 0.531851] fb: ---------------clear fb0 memory ffffff8001d00000
- [ 0.542628] fb: osd[0] canvas.idx =0x40
- [ 0.542630] fb: osd[0] canvas.addr=0x7e000000
- [ 0.542631] fb: osd[0] canvas.width=7680
- [ 0.542633] fb: osd[0] canvas.height=3240
- [ 0.542635] fb: osd[0] frame.width=1920
- [ 0.542636] fb: osd[0] frame.height=1080
- [ 0.567375] hdmitx: plugin
- [ 0.603140] Console: switching to colour frame buffer device 240x67
- [ 0.639413] fb: osd probe OK
- [ 0.639546] ge2d: ge2d_init_module
- [ 0.639556] ge2d: ge2d_dev major:243
- [ 0.639780] ge2d: ge2d clock is 400 MHZ
- [ 0.639788] ge2d: ge2d: pdev=ffffffc010297200, irq=182, rstc=0xffffffc063d72340, clk=ffffffc010315d00
- [ 0.639830] ge2d: mapped phy: 0xd0160000
- [ 0.639837] ge2d: ge2d start monitor
- [ 0.639908] ge2d: ge2d workqueue monitor start
- [ 0.640067] codec:Amlogic A/V streaming port init
- [ 0.640762] codec:get gate demux control ok ffffffc063d76c40
- [ 0.640770] codec:get gate parser_top control ok ffffffc063d76cc0
- [ 0.640777] codec:get gate vpu_intr control ok ffffffc063d76d40
- [ 0.640785] codec:get gate vdec control ok ffffffc063d76dc0
- [ 0.641054] codec:[tsync_pcr_init]init success.
- [ 0.641059] codec:amvideocap_init_module
- [ 0.641136] codec:amvideocap_probe,amvideocap
- [ 0.641141] codec:use cma buf.
- [ 0.641145] codec:amvideocap_dev_register
- [ 0.642061] codec:create_ge2d_work_queue video task ok
- [ 0.642310] codec:used fix clk for vdec clk source!
- [ 0.642320] codec:register clk_set_setting cpu[33]
- [ 0.642579] DI: di_module_init ok.
- [ 0.642591] DI: di_module_init: major 239
- [ 0.642745] DI: di_probe
- [ 0.642864] deinterlace has 1 memory regions
- [ 0.642889] DI: di reveser memory 0x7c200000, size 30MB.
- [ 0.642899] deinterlace deinterlace.25: assigned reserved memory node linux,di ok
- [ 0.642921] di_irq:78,timerc_irq:38
- [ 0.643039] rdma_register, rdma_table_addr ffffff80005dc000 rdma_table_addr_phy 74c08000 reg_buf ffffffc063dd6000
- [ 0.643044] rdma_register success, handle 1 table_size 8192
- [ 0.643048] DI: di_probe allocate rdma channel 1.
- [ 0.643054] DI: DI hw version 2.
- [ 0.643066] 0x000000db:Y=db,U=0,V=0
- [ 0.643070] 0x000000dc:Y=dc,U=0,V=0
- [ 0.643074] 0x000000dd:Y=dd,U=0,V=0
- [ 0.643078] 0x000000de:Y=de,U=0,V=0
- [ 0.643082] 0x000000df:Y=df,U=0,V=0
- [ 0.643085] 0x000000e0:Y=e0,U=0,V=0
- [ 0.643089] 0x000000e1:Y=e1,U=0,V=0
- [ 0.643093] 0x000000e2:Y=e2,U=0,V=0
- [ 0.643097] 0x000000e3:Y=e3,U=0,V=0
- [ 0.643101] 0x000000f0:Y=f0,U=0,V=0
- [ 0.643107] 0x000000f1:Y=f1,U=0,V=0
- [ 0.643111] 0x000000f2:Y=f2,U=0,V=0
- [ 0.643115] 0x000000f3:Y=f3,U=0,V=0
- [ 0.643119] 0x000000f4:Y=f4,U=0,V=0
- [ 0.643123] 0x000000f5:Y=f5,U=0,V=0
- [ 0.643127] 0x000000f6:Y=f6,U=0,V=0
- [ 0.643132] 0x000000f7:Y=f7,U=0,V=0
- [ 0.643136] 0x000000f8:Y=f8,U=0,V=0
- [ 0.643140] 0x000000f9:Y=f9,U=0,V=0
- [ 0.643144] 0x000000fa:Y=fa,U=0,V=0
- [ 0.643148] 0x000000fb:Y=fb,U=0,V=0
- [ 0.643151] 0x000000fc:Y=fc,U=0,V=0
- [ 0.643290] DI: di_probe here.
- [ 0.643500] efusekeynum: 4
- [ 0.643511] efusekeyname: mac offset: 0 size: 6
- [ 0.643518] efusekeyname: mac_bt offset: 6 size: 6
- [ 0.643526] efusekeyname: mac_wifi offset: 12 size: 6
- [ 0.643533] efusekeyname: usid offset: 18 size: 16
- [ 0.643657] efuse efuse.10: probe OK!
- [ 0.643843] key unify config unifykey-num is 14
- [ 0.643892] key unify fact unifykey-num is 14
- [ 0.643899] aml_unifykeys_probe:1273=============unifykey_devno:ed00000
- [ 0.644010] 6unifykey: device unifykeys created ok
- [ 0.644050] 6aml_unifykeys_init done!
- [ 0.644054] PPMGRDRV: warn: ppmgr module init func called
- [ 0.644113] ppmgr has 1 memory regions
- [ 0.644134] PPMGRDRV: info: ppmgr_dev major:236
- [ 0.644239] PPMGRDRV: info: ppmgr_probe done
- [ 0.644377] amlogic rfkill init
- [ 0.644428] enter bt_probe of_node
- [ 0.644439] not get gpio_en
- [ 0.644444] power on valid level is high
- [ 0.644455] driving bt gpio
- [ 0.703132] hdmitx: edid: check sum valid
- [ 0.703139] hdmitx: edid: check sum valid
- [ 0.703154] hdmitx: edid: blk0 raw data
- [ 0.703195] 00ffffffffffff003549380001010101001a010380a05a780aee91a3544c9926
- 0f5054a108003140454061407140818001010101010108e80030f2705a80b058
- 8a0040846300001e023a801871382d40582c450040846300001e000000fc006d
- 6172616e747a2d4156520a20000000fd003a3e1e883c000a2020202020200180
- [ 0.703208] hdmitx: edid: blk1 raw data
- [ 0.703249] 020364f15e6160101f0413051403021220212215015d5e5f65666263640e230f
- 241e26350f7f071507503d1ec05706015f7e03677e015f7e01835f00006e030c
- 002500b83c2000800102030467d85dc401788003e305c000e200cfe40f030018
- e3060501023a801871382d40582c4500c48e2100001e00000000000000000077
- [ 0.703263] EDID Parser:
- [ 0.703588] hdmitx: edid: find IEEEOUT
- [ 0.703596] hdmitx: edid: check sum valid
- [ 0.703600] hdmitx: edid: check sum valid
- [ 0.703605] hdmitx: update RX hdr info 5
- [ 0.705649] [RX]-receive ksv list len:1,depth:1,cas:0,dev:0
- [ 0.705657] hdmitx: video: get current mode: 1080p60hz
- [ 0.705661] hdmitx: update rx hdr info 5
- [ 0.705677] hdmitx: get ext_name (null)
- [ 0.705684] hdmitx: system: [set_disp_mode_auto] ALREADY init VIC = 16
- [ 0.705691] hdmtix: set audio
- [ 0.705702] hdmitx tx_aud_src = 0
- [ 0.705729] hdmitx: fs = 0, cd = 4, tmds_clk = 148500
- [ 0.705733] hdmitx aud_n_para = 6144
- [ 0.705752] hdmitx set channel status
- [ 1.477394] audio_dsp: [dsp]register dsp to char divece(257)
- [ 1.477728] amaudio: amaudio: driver amaudio succuess!
- [ 1.477932] [RX]-hdmirx: hdmirx_init.
- [ 1.477937] ESM HLD: Initializing...
- [ 1.477941] ESM HLD: Registering device range 'esm_rx'...
- [ 1.477948] ESM HLD: Device range 'esm_rx' has been registered.
- [ 1.477953] ESM HLD: Creating class /sys/class/elliptic_rx...
- [ 1.477967] ESM HLD: The class /sys/class/elliptic_rx has been created.
- [ 1.477971] ESM HLD: Creating device 'esm_rx'...
- [ 1.478025] ESM HLD: Device 'esm_rx' has been created.
- [ 1.478029] ESM HLD: Done initializing the HLD driver.
- [ 1.478032] module init
- [ 1.478116]
- VECM probe start
- [ 1.478257] aml_vecm_probe: ok
- [ 1.478499] saradc c1108680.saradc: initialized by BL30
- [ 1.478512] saradc c1108680.saradc: calibration start:
- [ 1.478559] saradc c1108680.saradc: nominal=0, value=7
- [ 1.478605] saradc c1108680.saradc: nominal=256, value=249
- [ 1.478651] saradc c1108680.saradc: nominal=512, value=499
- [ 1.478697] saradc c1108680.saradc: nominal=768, value=747
- [ 1.478743] saradc c1108680.saradc: nominal=1023, value=995
- [ 1.478748] saradc c1108680.saradc: calibration end: coef=4211
- [ 1.478803] remote: Driver init
- [ 1.478959] gpio-key gpio_keypad.46: gpio_key: 0 name(power) pin()
- [ 1.478965] gpio-key gpio_keypad.46: amlogic_gpio_name_map_num pin 0!::
- [ 1.478977] gpio-key gpio_keypad.46: gpio_key: 0 power(147)
- [ 1.479006] gpio-key gpio_keypad.46: start setup_timer
- [ 1.479016] gpio-key gpio_keypad.46: power key(116) registed.
- [ 1.479120] input: gpio_keypad as /devices/gpio_keypad.46/input/input0
- [ 1.479226] gpio-key gpio_keypad.46: gpio keypad register input device completed.
- [ 1.479236] input input0: gpio keypad major:233
- [ 1.479361] cpuinfo: probe done
- [ 1.479832] input: cec_input as /devices/virtual/input/input1
- [ 1.481222] cec: wake up flag:0
- [ 1.482023] aml_codec_T9015 c8832000.t9015: aml_T9015_audio_codec_probe
- [ 1.482871] aml_pcm_dai: pcm mode detection =1
- [ 1.483021] aml_spdif_dai: enterd aml_spdif_play,set_clock:-1,sample_rate=4
- [ 1.483033] aml_spdif_dai: set normal 512 fs /4 fs
- [ 1.483042] aml_audio_hw: IEC958 16bit
- [ 1.483048] hdmitx: audio: aout notify rate 48000
- [ 1.483052] hdmitx: audio: aout notify size 16
- [ 1.483057] hdmitx: audio: aout notify format CT_PCM
- [ 1.483061] hdmtix: set audio
- [ 1.483075] hdmitx tx_aud_src = 0
- [ 1.483103] hdmitx: fs = 3, cd = 4, tmds_clk = 148500
- [ 1.483107] hdmitx aud_n_para = 6144
- [ 1.483127] hdmitx set channel status
- [ 1.483189] hdmitx: audio: Audio Type: PCM
- [ 1.483192] hdmitx: audio: set audio param
- [ 1.577300] input input0: key 116 up
- [ 1.687474] aml_snd_card: headphone detection disable=1
- [ 1.687850] aml_snd_m8_card aml_m8_snd.45: T9015-audio-hifi <-> I2S.38 mapping ok
- [ 1.688159] aml_snd_m8_card aml_m8_snd.45: dit-hifi <-> SPDIF.39 mapping ok
- [ 1.688191] aml_pcm: enter aml_pcm_new dai->name: PCM.40 dai->id: 0
- [ 1.688258] aml_snd_m8_card aml_m8_snd.45: pcm2bt-pcm <-> PCM.40 mapping ok
- [ 1.688277] aml_snd_m8_card aml_m8_snd.45: ASoC: no source widget found for LOUTL
- [ 1.690497] aml_snd_m8_card aml_m8_snd.45: ASoC: Failed to add route LOUTL -> direct -> Ext Spk
- [ 1.699272] aml_snd_m8_card aml_m8_snd.45: ASoC: no source widget found for LOUTR
- [ 1.706846] aml_snd_m8_card aml_m8_snd.45: ASoC: Failed to add route LOUTR -> direct -> Ext Spk
- [ 1.818983] aml_snd_card: audio use jtag pinmux as i2s output, read val =0
- [ 1.823253] TCP: cubic registered
- [ 1.823665] NET: Registered protocol family 10
- [ 1.824283] NET: Registered protocol family 17
- [ 1.824348] Key type dns_resolver registered
- [ 1.825912] Registering SWP/SWPB emulation handler
- [ 1.826553] regulator-dummy: disabling
- [ 2.528169] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
- [ 2.528192] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
- [ 2.528542] xhci-hcd xhci-hcd.0.auto: irq 62, io mem 0xc9000000
- [ 2.528658] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- [ 2.528665] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 2.528671] usb usb1: Product: xHCI Host Controller
- [ 2.528677] usb usb1: Manufacturer: Linux 3.14.29-18-osmc xhci-hcd
- [ 2.528682] usb usb1: SerialNumber: xhci-hcd.0.auto
- [ 2.529035] hub 1-0:1.0: USB hub found
- [ 2.529059] hub 1-0:1.0: 2 ports detected
- [ 2.529213] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
- [ 2.529226] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
- [ 2.529323] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
- [ 2.529330] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 2.529335] usb usb2: Product: xHCI Host Controller
- [ 2.529341] usb usb2: Manufacturer: Linux 3.14.29-18-osmc xhci-hcd
- [ 2.529347] usb usb2: SerialNumber: xhci-hcd.0.auto
- [ 2.529639] hub 2-0:1.0: USB hub found
- [ 2.529658] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19)
- [ 2.531721] console [netcon0] enabled
- [ 2.531725] netconsole: network logging started
- [ 2.531810] aml_vrtc rtc.30: setting system clock to 2015-01-01 00:00:06 UTC (1420070406)
- [ 2.532590] cpufreq-scpi cpufreq-meson.7: enter cpufreq
- [ 2.532622] cpufreq-scpi cpufreq-meson.7: probe cpufreq okay
- [ 2.534606] gxbb_pm: enter meson_pm_probe!
- [ 2.534637] gxbb_pm: meson_pm_probe done
- [ 2.534753] aml_istbt_dev_ready NULL
- [ 2.535197] ALSA device list:
- [ 2.535201] #0: AML-M8AUDIO
- [ 2.535641] Freeing unused kernel memory: 948K (ffffffc001b36000 - ffffffc001c23000)
- [ 2.554013] fb: osd[0] canvas.idx =0x40
- [ 2.554015] fb: osd[0] canvas.addr=0x7e000000
- [ 2.554017] fb: osd[0] canvas.width=7680
- [ 2.554018] fb: osd[0] canvas.height=2160
- [ 2.554020] fb: osd[0] frame.width=1920
- [ 2.554021] fb: osd[0] frame.height=1080
- [ 2.579820] fb: Frame buffer memory assigned at
- [ 2.579834] fb: 1, phy: 0x000000007f800000, vir:0xffffff8003780000, size=1024K
- [ 2.579842] fb: fb1 open, logo index:1
- [ 2.606278] fb: osd[0] enable: 1 (init)
- [ 2.639509] vfm_map_store:rm default
- [ 2.639690] vfm_map_store:add default decoder ppmgr deinterlace amlvideo amvideo
- [ 2.653373] random: lvchange urandom read with 31 bits of entropy available
- [ 2.697771] bio: create slab <bio-1> at 1
- [ 2.810137] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
- [ 2.814190] fsck: E2fsck run: /bin/e2fsck -p -C 0 /dev/vero-nand/root
- [ 2.814298] fsck: Filesystem UUID: 2d453bef-5101-48fd-b601-ca7ae424ef40
- [ 2.814383] fsck: Superblock last mount time is in the future.
- [ 2.814510] fsck: (by less than a day, probably due to the hardware clock being incorrectly set)
- [ 2.814594] fsck: Superblock last write time is in the future.
- [ 2.814720] fsck: (by less than a day, probably due to the hardware clock being incorrectly set)
- [ 2.814833] fsck: /dev/vero-nand/root: clean, 32596/936560 files, 456947/3744768 blocks
- [ 3.606176] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
- [ 3.606352] systemd[1]: Detected architecture 'arm64'.
- [ 3.612052] systemd[1]: Set hostname to <vero4k>.
- [ 3.653818] meson_uart c81004c0.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200
- [ 3.751718] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
- [ 3.751897] systemd[1]: Found ordering cycle on basic.target/start
- [ 3.751907] systemd[1]: Found dependency on sysinit.target/start
- [ 3.751915] systemd[1]: Found dependency on rpcbind.service/start
- [ 3.751924] systemd[1]: Found dependency on network-online.target/start
- [ 3.751932] systemd[1]: Found dependency on network.target/start
- [ 3.751939] systemd[1]: Found dependency on connman.service/start
- [ 3.751946] systemd[1]: Found dependency on dbus.service/start
- [ 3.751953] systemd[1]: Found dependency on basic.target/start
- [ 3.751961] systemd[1]: Breaking ordering cycle by deleting job rpcbind.service/start
- [ 3.751970] systemd[1]: Job rpcbind.service/start deleted to break ordering cycle starting with basic.target/start
- [ 3.753287] systemd[1]: Expecting device dev-ttyS0.device...
- [ 3.753335] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
- [ 3.753501] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
- [ 3.753540] systemd[1]: Starting Remote File Systems (Pre).
- [ 3.753570] systemd[1]: Reached target Remote File Systems (Pre).
- [ 3.753600] systemd[1]: Starting mnt-movies.automount.
- [ 3.754756] systemd[1]: Set up automount mnt-movies.automount.
- [ 3.754844] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
- [ 3.754961] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
- [ 3.754992] systemd[1]: Starting Paths.
- [ 3.755020] systemd[1]: Reached target Paths.
- [ 3.755094] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
- [ 3.755320] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
- [ 3.755357] systemd[1]: Starting Encrypted Volumes.
- [ 3.755384] systemd[1]: Reached target Encrypted Volumes.
- [ 3.755425] systemd[1]: Starting Swap.
- [ 3.755451] systemd[1]: Reached target Swap.
- [ 3.755482] systemd[1]: Starting Root Slice.
- [ 3.755568] systemd[1]: Created slice Root Slice.
- [ 3.755600] systemd[1]: Starting User and Session Slice.
- [ 3.755686] systemd[1]: Created slice User and Session Slice.
- [ 3.755718] systemd[1]: Starting Delayed Shutdown Socket.
- [ 3.755820] systemd[1]: Listening on Delayed Shutdown Socket.
- [ 3.755852] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
- [ 3.755942] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
- [ 3.755972] systemd[1]: Starting Journal Socket (/dev/log).
- [ 3.756047] systemd[1]: Listening on Journal Socket (/dev/log).
- [ 3.756088] systemd[1]: Starting udev Control Socket.
- [ 3.756153] systemd[1]: Listening on udev Control Socket.
- [ 3.756190] systemd[1]: Starting udev Kernel Socket.
- [ 3.756265] systemd[1]: Listening on udev Kernel Socket.
- [ 3.756312] systemd[1]: Starting Journal Socket.
- [ 3.756400] systemd[1]: Listening on Journal Socket.
- [ 3.756476] systemd[1]: Starting System Slice.
- [ 3.756580] systemd[1]: Created slice System Slice.
- [ 3.756621] systemd[1]: Starting system-serial\x2dgetty.slice.
- [ 3.756762] systemd[1]: Created slice system-serial\x2dgetty.slice.
- [ 3.756794] systemd[1]: Starting Restore / save the current clock...
- [ 3.758761] systemd[1]: Mounting Debug File System...
- [ 3.760162] systemd[1]: Starting Create list of required static device nodes for the current kernel...
- [ 3.792574] systemd[1]: Started Set Up Additional Binary Formats.
- [ 3.792685] systemd[1]: Mounted Huge Pages File System.
- [ 3.792740] systemd[1]: Starting udev Coldplug all Devices...
- [ 3.796436] systemd[1]: Starting Load Kernel Modules...
- [ 3.797933] systemd[1]: Mounting POSIX Message Queue File System...
- [ 3.799205] systemd[1]: Starting LSB: NFS support files common to client and server...
- [ 3.800448] systemd[1]: Starting Journal Service...
- [ 3.801989] systemd[1]: Started Journal Service.
- [ 3.852376] media: Linux media interface: v0.10
- [ 3.890329] Linux video capture interface: v2.00
- [ 3.890341] WARNING: You are using an experimental version of the media stack.
- As the driver is backported to an older kernel, it doesn't offer
- enough quality for its usage in production.
- Use it with care.
- Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
- a83dbc951051ded0ec728f65cc918b7320600b55 Remove unused stv6120 headers.
- [ 3.921076] amlvideo-000: V4L2 device registered as video10
- [ 3.928239] fuse init (API version 7.22)
- [ 3.949720] systemd-udevd[182]: starting version 215
- [ 3.976795] systemd-journald[164]: Received request to flush runtime journal from PID 1
- [ 4.026364] WARNING: You are using an experimental version of the media stack.
- As the driver is backported to an older kernel, it doesn't offer
- enough quality for its usage in production.
- Use it with care.
- Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
- a83dbc951051ded0ec728f65cc918b7320600b55 Remove unused stv6120 headers.
- [ 4.031132] rc rc0: meson-ir as /devices/c8100580.meson-ir/rc/rc0
- [ 4.031409] Registered IR keymap rc-empty
- [ 4.031540] input: meson-ir as /devices/c8100580.meson-ir/rc/rc0/input2
- [ 4.031734] meson-ir c8100580.meson-ir: receiver initialized
- [ 4.043936] lirc_dev: IR Remote Control driver registered, major 230
- [ 4.048658] rc rc0: lirc_dev: driver ir-lirc-codec (meson-ir) registered at minor = 0
- [ 4.048668] IR LIRC bridge handler initialized
- [ 4.061862] mali-utgard d00c0000.mali: max pp is 3
- [ 4.061875] mali-utgard d00c0000.mali: set min pp to default 1
- [ 4.061879] mali-utgard d00c0000.mali: min pp is 1
- [ 4.061884] mali-utgard d00c0000.mali: set min clk default to 0
- [ 4.061889] mali-utgard d00c0000.mali: min clk is 0
- [ 4.061926] mali-utgard d00c0000.mali: hiu io source 0xffffff8000b7c000
- [ 4.061935] mali-utgard d00c0000.mali: hiu io source 0xffffff8000b7e000
- [ 4.061941] mali-utgard d00c0000.mali: num of pp used most of time 3
- [ 4.061946] mali-utgard d00c0000.mali: clock dvfs cfg table size is 7
- [ 4.062001] mali-utgard d00c0000.mali: max clk set 5
- [ 4.062005] mali-utgard d00c0000.mali: max clk is 5
- [ 4.062010] mali-utgard d00c0000.mali: turbo clk set to 6
- [ 4.062015] mali-utgard d00c0000.mali: turbo clk is 6
- [ 4.062020] mali-utgard d00c0000.mali: default clk is 3
- [ 4.062027] mali-utgard d00c0000.mali: ====================0====================
- clk_freq= 125000000, clk_parent=fclk_div4, voltage=1150, keep_count=5, threshod=<30 250>, clk_sample=125
- [ 4.062036] mali-utgard d00c0000.mali: ====================1====================
- clk_freq= 285000000, clk_parent=fclk_div7, voltage=1150, keep_count=5, threshod=<100 250>, clk_sample=285
- [ 4.062045] mali-utgard d00c0000.mali: ====================2====================
- clk_freq= 400000000, clk_parent=fclk_div5, voltage=1150, keep_count=3, threshod=<168 250>, clk_sample=400
- [ 4.062054] mali-utgard d00c0000.mali: ====================3====================
- clk_freq= 500000000, clk_parent=fclk_div4, voltage=1150, keep_count=2, threshod=<190 250>, clk_sample=500
- [ 4.062062] mali-utgard d00c0000.mali: ====================4====================
- clk_freq= 666000000, clk_parent=fclk_div3, voltage=1150, keep_count=1, threshod=<177 250>, clk_sample=666
- [ 4.062071] mali-utgard d00c0000.mali: ====================5====================
- clk_freq= 744000000, clk_parent= gp0_pll, voltage=1150, keep_count=1, threshod=<213 255>, clk_sample=744
- [ 4.062080] mali-utgard d00c0000.mali: ====================6====================
- clk_freq= 744000000, clk_parent= gp0_pll, voltage=1150, keep_count=1, threshod=<213 255>, clk_sample=744
- [ 4.062087] mali-utgard d00c0000.mali: clock dvfs table size is 7
- [ 4.063912] gpu cooling register okay with err=0
- [ 4.063952] gpu core cooling register okay with err=0
- [ 4.064180] Mali: Mali device driver loaded
- [ 4.066158] Triggered SDIO WiFi power on and bus rescan.
- [ 4.066188] aml_wifi wifi.31: [extern_wifi_set_enable] WIFI Disable! 240
- [ 4.199927] systemd-journald[164]: Received request to flush runtime journal from PID 1
- [ 4.276693] dwc_otg: usb0: type: 2 speed: 0, config: 0, dma: 0, id: 0, phy: d0078000, ctrl: 0
- [ 4.276706] dwc_otg_driver_probe host only, not probe usb_otg!!!
- [ 4.367343] aml_wifi wifi.31: [extern_wifi_set_enable] WIFI Enable! 240
- [ 4.506293] systemd-journald[164]: Received request to flush runtime journal from PID 1
- [ 4.708743] sdio: queuing unknown CIS tuple 0x80 (2 bytes)
- [ 4.711339] sdio: queuing unknown CIS tuple 0x80 (3 bytes)
- [ 4.713928] sdio: queuing unknown CIS tuple 0x80 (3 bytes)
- [ 4.718821] sdio: queuing unknown CIS tuple 0x80 (7 bytes)
- [ 4.811090] sdio: clk 200000000 SDR mode tuning start
- [ 4.811241] sdio: rx_tuning_result[0] = 10
- [ 4.811381] sdio: rx_tuning_result[1] = 10
- [ 4.811522] sdio: rx_tuning_result[2] = 10
- [ 4.811676] sdio: rx_tuning_result[4] = 10
- [ 4.811680] sdio: best_win_start =4, best_win_size =4
- [ 4.811684] sdio: sd_emmc_regs->gclock=0x1000245,sd_emmc_regs->gadjust=0x12000
- [ 4.811691] sdio: gclock =0x1000245, gdelay=0x0, gadjust=0x12000
- [ 4.813683] sdio: queuing unknown CIS tuple 0x91 (3 bytes)
- [ 4.813706] sdio: new ultra high speed SDR104 SDIO card at address 0001
- [ 4.813710] sdio: clock 200000000, 4-bit-bus-width
- [ 4.813950] [sdio_reinit] finish
- [ 4.845006] cfg80211: Calling CRDA to update world regulatory domain
- [ 4.868388] input: lircd as /devices/virtual/input/input3
- [ 4.975175] dhd_module_init: in
- [ 4.975189] ======== bcm_wlan_set_plat_data ========
- [ 4.975193] host_oob_irq: 100
- [ 4.975196] host_oob_irq_flags=0x414
- [ 4.975200] dhd_wifi_platform_load: Enter
- [ 4.975219] Power-up adapter 'DHD generic adapter'
- [ 4.975222] wifi_platform_set_power = 1
- [ 4.975225] ======== PULL WL_REG_ON HIGH! ========
- [ 4.975249] aml_wifi wifi.31: [extern_wifi_set_enable] WIFI Disable! 240
- [ 5.175342] aml_wifi wifi.31: [extern_wifi_set_enable] WIFI Enable! 240
- [ 5.233764] BT_RADIO going: off
- [ 5.233779] BCM_BT: going SOFT-OFF, GPIO still being driven
- [ 5.321740] Console: switching to colour dummy device 80x25
- [ 5.418601] 8021q: 802.1Q VLAN Support v1.8
- [ 5.677313] wifi_platform_bus_enumerate device present 1
- [ 5.677324] ======== Card detection to detect SDIO card! ========
- [ 5.677328] sdio_reset_comm():
- [ 5.705650] sdio: queuing unknown CIS tuple 0x80 (2 bytes)
- [ 5.708252] sdio: queuing unknown CIS tuple 0x80 (3 bytes)
- [ 5.710846] sdio: queuing unknown CIS tuple 0x80 (3 bytes)
- [ 5.715506] sdio: queuing unknown CIS tuple 0x80 (7 bytes)
- [ 5.808485] sdio: clk 200000000 SDR mode tuning start
- [ 5.808645] sdio: rx_tuning_result[0] = 10
- [ 5.808799] sdio: rx_tuning_result[1] = 10
- [ 5.808942] sdio: rx_tuning_result[2] = 10
- [ 5.809095] sdio: rx_tuning_result[4] = 10
- [ 5.809099] sdio: best_win_start =4, best_win_size =4
- [ 5.809104] sdio: sd_emmc_regs->gclock=0x1000245,sd_emmc_regs->gadjust=0x12000
- [ 5.809109] sdio: gclock =0x1000245, gdelay=0x0, gadjust=0x12000
- [ 5.809114] [sdio_reinit] finish
- [ 5.825379] bcmsdh_register: register client driver
- [ 5.825466] bcmsdh_sdmmc: bcmsdh_sdmmc_probe Enter
- [ 5.825524] bcmsdh_sdmmc: bcmsdh_sdmmc_probe Enter
- [ 5.825530] bus num (host idx)=0, slot num (rca)=1
- [ 5.825533] found adapter info 'DHD generic adapter'
- [ 5.825785] sdioh_attach: set sd_f2_blocksize 128
- [ 5.826000] dhdsdio_probe : no mutex held. set lock
- [ 5.826071] F1 signature read @0x18000000=0x15264345
- [ 5.828042] F1 signature OK, socitype:0x1 chip:0x4345 rev:0x6 pkg:0x2
- [ 5.828433] DHD: dongle ram size is set to 819200(orig 819200) at 0x198000
- [ 5.828494] dhd_conf_set_chiprev: chip=0x4345, chiprev=6
- [ 5.828533] dhd_conf_set_conf_path_by_nv_path: config_path=/lib/firmware/config.txt
- [ 5.828538] dhd_conf_set_conf_name_by_chip: config_path=/lib/firmware/config_43455c0.txt
- [ 5.830486] dhd_conf_read_config: mimo_bw_cap = 1
- [ 5.830550] dhd_conf_read_config: bcn_timeout = 20
- [ 5.830566] dhd_conf_read_config: kso_enable = 0
- [ 5.831058] wl_create_event_handler(): thread:wl_event_handler:1d6 started
- [ 5.831061] tsk Enter, tsk = 0xffffff8001949880
- [ 5.831241] dhd_attach(): thread:dhd_watchdog_thread:1d7 started
- [ 5.831277] dhd_attach(): thread:dhd_dpc:1d8 started
- [ 5.831288] dhd_dpc_thread: set dpc_cpucore 0 from config.txt
- [ 5.831315] dhd_attach(): thread:dhd_rxf:1d9 started
- [ 5.831325] dhd_deferred_work_init: work queue initialized
- [ 5.837999] Dongle Host Driver, version 1.201.59.6 (r506368)
- Compiled in drivers/net/wireless/bcmdhd
- [ 5.839568] Register interface [wlan0] MAC: 44:2c:05:b8:91:18
- [ 5.839583] dhd_prot_ioctl : bus is down. we have nothing to do
- [ 5.839796] dhd_open: Enter ffffffc062a54000
- [ 5.839803] dhd_open : dhd_open: call dev open before insmod complete!
- [ 5.839859] bcmsdh_oob_intr_unregister: Enter
- [ 5.839863] bcmsdh_oob_intr_unregister: irq is not registered
- [ 5.839872] dhd_txglom_enable: enable 0
- [ 5.839877] dhd_conf_set_txglom_params: swtxglom=0, txglom_ext=0
- [ 5.839880] dhd_conf_set_txglom_params: txglom_bucket_size=0
- [ 5.839884] dhd_conf_set_txglom_params: txglomsize=0, deferred_tx_len=0, bus_txglom=0
- [ 5.839887] dhd_conf_set_txglom_params: tx_in_rx=1, tx_max_offset=0
- [ 5.839891] dhd_bus_devreset: WLAN OFF DONE
- [ 5.839931] wifi_platform_set_power = 0
- [ 5.839935] ======== PULL WL_REG_ON LOW! ========
- [ 5.839942] dhdsdio_probe : the lock is released.
- [ 5.839954]
- Dongle Host Driver, version 1.201.59.6 (r506368)
- Compiled in drivers/net/wireless/bcmdhd
- [ 5.839961] wl_android_wifi_on in 1
- [ 5.839964] wl_android_wifi_on in 2: g_wifi_on=0
- [ 5.839968] wifi_platform_set_power = 1
- [ 5.839970] ======== PULL WL_REG_ON HIGH! ========
- [ 5.839991] aml_wifi wifi.31: [extern_wifi_set_enable] WIFI Disable! 240
- [ 6.040044] aml_wifi wifi.31: [extern_wifi_set_enable] WIFI Enable! 240
- [ 6.340140] bcmsdh_sdmmc: bcmsdh_sdmmc_probe Enter
- [ 6.340219] dhd_module_init: Exit err=0
- [ 6.374086] Bluetooth: Core ver 2.18
- [ 6.374138] NET: Registered protocol family 31
- [ 6.374142] Bluetooth: HCI device and connection manager initialized
- [ 6.374164] Bluetooth: HCI socket layer initialized
- [ 6.374171] Bluetooth: L2CAP socket layer initialized
- [ 6.547315] sdio_reset_comm():
- [ 6.575528] sdio: queuing unknown CIS tuple 0x80 (2 bytes)
- [ 6.678634] sdio: clk 200000000 SDR mode tuning start
- [ 6.678797] sdio: rx_tuning_result[0] = 10
- [ 6.678942] sdio: rx_tuning_result[1] = 10
- [ 6.679089] sdio: rx_tuning_result[2] = 10
- [ 6.679251] sdio: rx_tuning_result[4] = 10
- [ 6.679255] sdio: best_win_start =4, best_win_size =4
- [ 6.679259] sdio: sd_emmc_regs->gclock=0x1000245,sd_emmc_regs->gadjust=0x12000
- [ 6.679265] sdio: gclock =0x1000245, gdelay=0x0, gadjust=0x12000
- [ 6.679300] sdioh_start: set sd_f2_blocksize 128
- [ 6.679526] dhd_conf_set_conf_name_by_chip: config_path=/lib/firmware/config_43455c0.txt
- [ 6.679531]
- dhd_bus_devreset: == WLAN ON ==
- [ 6.679606] F1 signature read @0x18000000=0x15264345
- [ 6.681619] F1 signature OK, socitype:0x1 chip:0x4345 rev:0x6 pkg:0x2
- [ 6.682037] DHD: dongle ram size is set to 819200(orig 819200) at 0x198000
- [ 6.682342] dhd_conf_read_config: mimo_bw_cap = 1
- [ 6.682402] dhd_conf_read_config: bcn_timeout = 20
- [ 6.682418] dhd_conf_read_config: kso_enable = 0
- [ 6.682523] dhd_conf_set_fw_name_by_chip: firmware_path=/lib/firmware/fw_bcm43455c0_ag.bin
- [ 6.682528] nazarko_dhd_conf_set_nv_name_by_chip: nvram_path=/lib/firmware/nvram_43455c0.txt
- [ 6.682532] dhdsdio_download_firmware: set use_rxchain 0
- [ 6.682535] dhdsdio_download_firmware: set txglomsize 40
- [ 6.682539] sdioh_set_mode: set txglom_mode to multi-desc
- [ 6.682542] Final fw_path=/lib/firmware/fw_bcm43455c0_ag.bin
- [ 6.682545] Final nv_path=/lib/firmware/nvram_43455c0.txt
- [ 6.682548] Final conf_path=/lib/firmware/config_43455c0.txt
- [ 6.692435] random: nonblocking pool is initialized
- [ 6.720808] aml_spdif_dai: enterd aml_spdif_play,set_clock:4,sample_rate=4
- [ 6.720864] aml_spdif_dai: share the same clock
- [ 6.720873] aml_audio_hw: IEC958 16bit
- [ 6.720879] hdmitx: audio: aout notify rate 48000
- [ 6.720883] hdmitx: audio: aout notify size 16
- [ 6.720886] hdmitx: audio: no update
- [ 6.721412] NVRAM version: AP6255_NVRAM_V1.0_29052015
- [ 6.721753] dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded.
- [ 6.745443] aml_spdif_dai: share the same clock
- [ 6.745460] aml_audio_hw: IEC958 16bit
- [ 6.745466] hdmitx: audio: aout notify rate 48000
- [ 6.745469] hdmitx: audio: aout notify size 16
- [ 6.745472] hdmitx: audio: no update
- [ 6.748085] aml_spdif_dai: share the same clock
- [ 6.748101] aml_audio_hw: IEC958 16bit
- [ 6.748107] hdmitx: audio: aout notify rate 48000
- [ 6.748110] hdmitx: audio: aout notify size 16
- [ 6.748114] hdmitx: audio: no update
- [ 6.749246] aml_spdif_dai: share the same clock
- [ 6.749263] aml_audio_hw: IEC958 16bit
- [ 6.749270] hdmitx: audio: aout notify rate 48000
- [ 6.749273] hdmitx: audio: aout notify size 16
- [ 6.749276] hdmitx: audio: no update
- [ 6.750268] aml_spdif_dai: share the same clock
- [ 6.750285] aml_audio_hw: IEC958 16bit
- [ 6.750292] hdmitx: audio: aout notify rate 48000
- [ 6.750296] hdmitx: audio: aout notify size 16
- [ 6.750299] hdmitx: audio: no update
- [ 6.799279] dhd_bus_init: enable 0x06, ready 0x06 (waited 0us)
- [ 6.799379] bcmsdh_oob_intr_register: Enter
- [ 6.799383] bcmsdh_oob_intr_register: HW_OOB enabled
- [ 6.799387] bcmsdh_oob_intr_register OOB irq=100 flags=414
- [ 6.799410] bcmsdh_oob_intr_register: enable_irq_wake
- [ 6.799416] bcmsdh_oob_intr_register: enable_irq_wake failed with -6
- [ 6.799869] dhd_conf_set_fw_int_cmd: set WLC_SET_BAND 142 0
- [ 6.800310] dhd_preinit_ioctls: Set tcpack_sup_mode 0
- [ 6.801975] Firmware up: op_mode=0x0005, MAC=44:2c:05:b8:91:18
- [ 6.801987] dhd_conf_set_country: set country ALL, revision 38
- [ 6.801991] dhd_conf_set_fw_string_struct_cmd: set country
- [ 6.802451] CONFIG-ERROR) dhd_conf_set_fw_string_struct_cmd: country setting failed -2
- [ 6.803112] Country code: US (US/0)
- [ 6.803434] dhd_conf_set_fw_string_cmd: set roam_off 1
- [ 6.804855] dhd_conf_set_fw_string_cmd: set mimo_bw_cap 1
- [ 6.805478] dhd_conf_set_fw_string_cmd: set txbf 1
- [ 6.805911] CONFIG-ERROR) dhd_conf_set_fw_string_cmd: txbf setting failed -23
- [ 6.810597] Firmware version = wl0: Aug 25 2015 18:58:57 version 7.45.69 (r581703) FWID 01-24037f6e
- [ 6.810611] Driver: 1.201.59.6 (r506368)
- Firmware: wl0: Aug 25 2015 18:58:57 version 7.45.69 (r581703) FWID 01-24037f6e
- [ 6.810759] dhd_txglom_enable: enable 1
- [ 6.810764] dhd_conf_set_txglom_params: swtxglom=0, txglom_ext=0
- [ 6.810768] dhd_conf_set_txglom_params: txglom_bucket_size=0
- [ 6.810772] dhd_conf_set_txglom_params: txglomsize=40, deferred_tx_len=40, bus_txglom=0
- [ 6.810775] dhd_conf_set_txglom_params: tx_in_rx=1, tx_max_offset=0
- [ 6.810779] dhd_conf_set_disable_proptx: set disable_proptx 0
- [ 6.811228] dhd_wlfc_hostreorder_init(): successful bdcv2 tlv signaling, 64
- [ 6.811663] wl_android_wifi_on: Success
- [ 6.865603] dhd_open: Exit ret=0
- [ 6.865952] Bluetooth: SCO socket layer initialized
- [ 6.868406] Bluetooth: Generic Bluetooth SDIO driver ver 0.1
- [ 7.575423] Connectting with 56:d9:e7:92:69:74 channel (52) ssid "soetens2", len (8)
- [ 7.658544] wl_iw_event: Link UP with BSSID=56:D9:E7:92:69:74
- [ 7.658629] wl_bss_connect_done succeeded with 56:d9:e7:92:69:74
- [ 7.669482] wl_bss_connect_done succeeded with 56:d9:e7:92:69:74
- [ 7.766922] audio_dsp: buf=0
- [ 7.766936] audio_dsp: IEC958_mode_raw=0
- [ 7.766967] audio_dsp: IEC958_mode_codec= 0, IEC958 type 2 CH PCM
- [ 7.766971] audio_dsp: last mode 0,now 0
- [ 7.773364] aml_spdif_dai: share the same clock
- [ 7.773381] aml_audio_hw: IEC958 16bit
- [ 7.773387] hdmitx: audio: aout notify rate 48000
- [ 7.773391] hdmitx: audio: aout notify size 16
- [ 7.773394] hdmitx: audio: no update
- [ 7.775243] aml_spdif_dai: share the same clock
- [ 7.775260] aml_audio_hw: IEC958 16bit
- [ 7.775266] hdmitx: audio: aout notify rate 48000
- [ 7.775270] hdmitx: audio: aout notify size 16
- [ 7.775273] hdmitx: audio: no update
- [ 7.776840] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, same source mode(1)
- [ 7.776850] aml_spdif_dai: share the same clock
- [ 7.776856] aml_spdif_dai: iec958 mode PCM32
- [ 7.776864] aml_audio_hw: IEC958 PCM32
- [ 7.776870] hdmitx: audio: aout notify rate 44100
- [ 7.776873] hdmitx: audio: aout notify size 32
- [ 7.776878] hdmtix: set audio
- [ 7.776891] hdmitx tx_aud_src = 0
- [ 7.776916] hdmitx: fs = 2, cd = 4, tmds_clk = 148500
- [ 7.776920] hdmitx aud_n_para = 6272
- [ 7.776938] hdmitx set channel status
- [ 7.776997] hdmitx: audio: Audio Type: PCM
- [ 7.777001] hdmitx: audio: set audio param
- [ 7.777010] aml_snd_m8_card aml_m8_snd.45: i2s/958 same source
- [ 7.777362] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, same source mode(1)
- [ 7.777370] aml_spdif_dai: share the same clock
- [ 7.777376] aml_spdif_dai: iec958 mode PCM32
- [ 7.777383] aml_audio_hw: IEC958 PCM32
- [ 7.777389] hdmitx: audio: aout notify rate 44100
- [ 7.777393] hdmitx: audio: aout notify size 32
- [ 7.777396] hdmitx: audio: no update
- [ 7.777404] aml_snd_m8_card aml_m8_snd.45: i2s/958 same source
- [ 7.787183] aml_snd_m8_card aml_m8_snd.45: I2S playback enable
- [ 7.787199] aml_snd_m8_card aml_m8_snd.45: IEC958 playback enable
- [ 8.204187] aml_snd_m8_card aml_m8_snd.45: I2S playback disable
- [ 8.204202] aml_snd_m8_card aml_m8_snd.45: IEC958 playback disable
- [ 8.204237] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, same source mode(1)
- [ 8.204241] aml_spdif_dai: share the same clock
- [ 8.204246] aml_spdif_dai: iec958 mode PCM32
- [ 8.204253] aml_audio_hw: IEC958 PCM32
- [ 8.204260] hdmitx: audio: aout notify rate 44100
- [ 8.204263] hdmitx: audio: aout notify size 32
- [ 8.204266] hdmitx: audio: no update
- [ 8.204271] aml_snd_m8_card aml_m8_snd.45: i2s/958 same source
- [ 8.204472] aml_spdif_dai: enterd aml_spdif_play,set_clock:5,sample_rate=4
- [ 8.204479] aml_spdif_dai: share the same clock
- [ 8.204486] aml_audio_hw: IEC958 16bit
- [ 8.204491] hdmitx: audio: aout notify rate 48000
- [ 8.204494] hdmitx: audio: aout notify size 16
- [ 8.204498] hdmtix: set audio
- [ 8.204511] hdmitx tx_aud_src = 0
- [ 8.204537] hdmitx: fs = 3, cd = 4, tmds_clk = 148500
- [ 8.204541] hdmitx aud_n_para = 6144
- [ 8.204559] hdmitx set channel status
- [ 8.204617] hdmitx: audio: Audio Type: PCM
- [ 8.204620] hdmitx: audio: set audio param
- [ 8.204805] vout_serve: vmode set to smpte24hz
- [ 8.204830] fb: current vmode=1080p60hz
- [ 8.204838] tv_vout: tv_set_current_vmode[764]fps_target_mode=24
- [ 8.204843] tv_vout: mode is 24,sync_duration_den=1,sync_duration_num=24
- [ 8.204852] tv_vout: TV mode smpte24hz selected.
- [ 8.204857]
- vdac_enable: on:0,module_sel:8
- [ 8.204865]
- vdac_enable: on:0,module_sel:8
- [ 8.204874] tv_vout: new mode =smpte24hz set ok
- [ 8.204877] vout_serve: vinfo mode is: smpte24hz
- [ 8.204880] vout_serve: new mode smpte24hz set ok
- [ 8.204894] hdmitx: video: get current mode: smpte24hz
- [ 8.204897] hdmitx: update rx hdr info 5
- [ 8.204907] hdmitx: get ext_name 1080p60hz
- [ 8.204938] hdmitx: system: already init VIC = 0 Now VIC = 98
- [ 8.204943] hdmitx: rx has SCDC present indicator
- [ 8.206955] hdmirx version is 2.0
- [ 8.206958] hdmitx div40: 0
- [ 8.227297] hdmitx: system: set mode VIC 98 (cd0,cs0,pm1,vd0,1)
- [ 8.227305] hdmitx: system: set pll
- [ 8.227309] hdmitx: system: param->VIC:98
- [ 8.227313] hdmitx: set clk: VIC = 98 cd = 4
- [ 8.227319] config HPLL = 2970000
- [ 8.227339] HPLL: 0xc000027b
- [ 8.227341] config HPLL done
- [ 8.227348] set_hpll_od3_clk_div[441] div = 6
- [ 8.227356] j = 6 vid_clk_div = 2
- [ 8.227367] hdmitx: set enc for VIC: 98
- [ 8.227381] hdmitx_set_hw[4867] set VIC = 98
- [ 8.359290] hdmitx: system: phy setting done
- [ 8.359307] hdmitx: system: irq 80000001
- [ 8.359324] Start = 0x10000100 End = 0x100001ff
- [ 8.359335] [0x10000104]: 0x00000001
- [ 8.359504] [0x10000180]: 0x000000ff
- [ 8.359508] [0x10000181]: 0x000000ff
- [ 8.359513] [0x10000182]: 0x00000003
- [ 8.359517] [0x10000183]: 0x00000007
- [ 8.359522] [0x10000184]: 0x0000003f
- [ 8.359526] [0x10000185]: 0x00000002
- [ 8.359532] [0x10000187]: 0x000000ff
- [ 8.359536] [0x10000188]: 0x00000003
- [ 8.363309] Sink is HDMI device
- [ 8.363329] hdmitx: system: packet: can't get vendor data
- [ 8.363333] hdmtix: set audio
- [ 8.363343] hdmitx tx_aud_src = 0
- [ 8.363368] hdmitx: fs = 3, cd = 4, tmds_clk = 297000
- [ 8.363372] hdmitx aud_n_para = 5120
- [ 8.363390] hdmitx set channel status
- [ 8.363448] hdmitx: audio: Audio Type: PCM
- [ 8.363454] fb: current vmode=smpte24hz
- [ 8.403090] fb: osd[0] canvas.idx =0x40
- [ 8.403092] fb: osd[0] canvas.addr=0x7e000000
- [ 8.403094] fb: osd[0] canvas.width=16384
- [ 8.403095] fb: osd[0] canvas.height=2160
- [ 8.403097] fb: osd[0] frame.width=4096
- [ 8.403098] fb: osd[0] frame.height=2160
- [ 8.527548] fb: osd[0] canvas.idx =0x40
- [ 8.527550] fb: osd[0] canvas.addr=0x7e000000
- [ 8.527552] fb: osd[0] canvas.width=7680
- [ 8.527553] fb: osd[0] canvas.height=2160
- [ 8.527555] fb: osd[0] frame.width=1920
- [ 8.527556] fb: osd[0] frame.height=1080
- [ 8.533107] fb: osd[0] enable: 1 (kodi.bin)
- [ 8.533516] audio_dsp: buf=0
- [ 8.533518] audio_dsp: IEC958_mode_raw=0
- [ 8.533546] audio_dsp: IEC958_mode_codec= 0, IEC958 type 2 CH PCM
- [ 8.533548] audio_dsp: last mode 0,now 0
- [ 8.539359] aml_spdif_dai: share the same clock
- [ 8.539367] aml_audio_hw: IEC958 16bit
- [ 8.539373] hdmitx: audio: aout notify rate 48000
- [ 8.539375] hdmitx: audio: aout notify size 16
- [ 8.539376] hdmitx: audio: no update
- [ 8.541195] aml_spdif_dai: share the same clock
- [ 8.541203] aml_audio_hw: IEC958 16bit
- [ 8.541209] hdmitx: audio: aout notify rate 48000
- [ 8.541210] hdmitx: audio: aout notify size 16
- [ 8.541212] hdmitx: audio: no update
- [ 8.542631] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, same source mode(1)
- [ 8.542635] aml_spdif_dai: share the same clock
- [ 8.542639] aml_spdif_dai: iec958 mode PCM32
- [ 8.542644] aml_audio_hw: IEC958 PCM32
- [ 8.542648] hdmitx: audio: aout notify rate 44100
- [ 8.542649] hdmitx: audio: aout notify size 32
- [ 8.542652] hdmtix: set audio
- [ 8.542662] hdmitx tx_aud_src = 0
- [ 8.542686] hdmitx: fs = 2, cd = 4, tmds_clk = 297000
- [ 8.542688] hdmitx aud_n_para = 4707
- [ 8.542705] hdmitx set channel status
- [ 8.542761] hdmitx: audio: Audio Type: PCM
- [ 8.542762] hdmitx: audio: set audio param
- [ 8.542770] aml_snd_m8_card aml_m8_snd.45: i2s/958 same source
- [ 8.542945] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, same source mode(1)
- [ 8.542946] aml_spdif_dai: share the same clock
- [ 8.542949] aml_spdif_dai: iec958 mode PCM32
- [ 8.542953] aml_audio_hw: IEC958 PCM32
- [ 8.542956] hdmitx: audio: aout notify rate 44100
- [ 8.542957] hdmitx: audio: aout notify size 32
- [ 8.542958] hdmitx: audio: no update
- [ 8.542963] aml_snd_m8_card aml_m8_snd.45: i2s/958 same source
- [ 8.546304] aml_snd_m8_card aml_m8_snd.45: I2S playback enable
- [ 8.546310] aml_snd_m8_card aml_m8_snd.45: IEC958 playback enable
- [ 10.893414] meson_uart c81004c0.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200
- [ 10.893572] meson_uart c81004c0.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200
- [ 10.911630] meson_uart c81004c0.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200
- [ 10.911797] meson_uart c81004c0.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200
- [ 68.731494] aml_snd_m8_card aml_m8_snd.45: I2S playback disable
- [ 68.731524] aml_snd_m8_card aml_m8_snd.45: IEC958 playback disable
- [ 68.731598] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, same source mode(1)
- [ 68.731608] aml_spdif_dai: share the same clock
- [ 68.731620] aml_spdif_dai: iec958 mode PCM32
- [ 68.731634] aml_audio_hw: IEC958 PCM32
- [ 68.731648] hdmitx: audio: aout notify rate 44100
- [ 68.731657] hdmitx: audio: aout notify size 32
- [ 68.731666] hdmitx: audio: no update
- [ 68.731680] aml_snd_m8_card aml_m8_snd.45: i2s/958 same source
- [ 78.731933] aml_spdif_dai: enterd aml_spdif_play,set_clock:5,sample_rate=4
- [ 78.731958] aml_spdif_dai: share the same clock
- [ 78.731975] aml_audio_hw: IEC958 16bit
- [ 78.731988] hdmitx: audio: aout notify rate 48000
- [ 78.731997] hdmitx: audio: aout notify size 16
- [ 78.732008] hdmtix: set audio
- [ 78.732033] hdmitx tx_aud_src = 0
- [ 78.732085] hdmitx: fs = 3, cd = 4, tmds_clk = 297000
- [ 78.732095] hdmitx aud_n_para = 5120
- [ 78.732131] hdmitx set channel status
- [ 78.732235] hdmitx: audio: Audio Type: PCM
- [ 78.732244] hdmitx: audio: set audio param
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement