U-Boot SPL 2022.04-ge0d31da5 (Aug 04 2023 - 18:48:26 +0000)
Trying to boot from MMC1


U-Boot 2022.04-ge0d31da5 (Aug 04 2023 - 18:48:26 +0000)

CPU  : AM335X-GP rev 2.1
Model: TI AM335x BeagleBone Black
DRAM:  512 MiB
Reset Source: Power-on reset has occurred.
RTC 32KCLK Source: External.
Core:  150 devices, 14 uclasses, devicetree: separate
WDT:   Started wdt@44e35000 with servicing (60s timeout)
MMC:   OMAP SD/MMC: 0, OMAP SD/MMC: 1
Loading Environment from EXT4... ** File not found /boot/uboot.env **

** Unable to read "/boot/uboot.env" from mmc0:1 **
Board: BeagleBone Black
<ethaddr> not set. Validating first E-fuse MAC
BeagleBone Black:
BeagleBone Cape EEPROM: no EEPROM at address: 0x54
BeagleBone Cape EEPROM: no EEPROM at address: 0x55
BeagleBone Cape EEPROM: no EEPROM at address: 0x56
BeagleBone Cape EEPROM: no EEPROM at address: 0x57
Net:   eth2: ethernet@4a100000, eth3: usb_ether
Press SPACE to abort autoboot in 0 seconds
board_name=[A335BNLT] ...
board_rev=[000C] ...
switch to partitions #0, OK
mmc0 is current device
SD/MMC found on device 0
Couldn't find partition 0:2 0x82000000
Can't set block device
Couldn't find partition 0:2 0x82000000
Can't set block device
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:1...
libfdt fdt_check_header(): FDT_ERR_BADMAGIC
78Scanning disk [email protected]...
Scanning disk [email protected]...
Found 4 disks
No EFI system partition
BootOrder not defined
EFI boot manager: Cannot load any image
gpio: pin 56 (gpio 56) value is 0
gpio: pin 55 (gpio 55) value is 0
gpio: pin 54 (gpio 54) value is 0
gpio: pin 53 (gpio 53) value is 1
switch to partitions #0, OK
mmc0 is current device
gpio: pin 54 (gpio 54) value is 1
Checking for: /uEnv.txt ...
Checking for: /boot/uEnv.txt ...
gpio: pin 55 (gpio 55) value is 1
1747 bytes read in 4 ms (425.8 KiB/s)
Loaded environment from /boot/uEnv.txt
Checking if uname_r is set in /boot/uEnv.txt...
gpio: pin 56 (gpio 56) value is 1
Running uname_boot ...
loading /boot/vmlinuz-5.10.168-ti-r69 ...
11272704 bytes read in 717 ms (15 MiB/s)
debug: [enable_uboot_overlays=1] ...
debug: [enable_uboot_cape_universal=1] ...
debug: [uboot_base_dtb_univ=am335x-boneblack-uboot-univ.dtb] ...
uboot_overlays: [uboot_base_dtb=am335x-boneblack-uboot-univ.dtb] ...
uboot_overlays: Switching too: dtb=am335x-boneblack-uboot-univ.dtb ...
loading /boot/dtbs/5.10.168-ti-r69/am335x-boneblack-uboot-univ.dtb ...
210757 bytes read in 20 ms (10 MiB/s)
Found 0 extension board(s).
uboot_overlays: [fdt_buffer=0x60000] ...
uboot_overlays: loading /boot/dtbs/5.10.168-ti-r69/overlays/BB-ADC-00A0.dtbo ...
645 bytes read in 7 ms (89.8 KiB/s)
uboot_overlays: loading /lib/firmware/BB-UART4-00A0.dtbo ...
1022 bytes read in 10 ms (99.6 KiB/s)
uboot_overlays: loading /lib/firmware/BB-UART2-00A0.dtbo ...
1022 bytes read in 9 ms (110.4 KiB/s)
uboot_overlays: loading /boot/dtbs/5.10.168-ti-r69/overlays/BB-BONE-eMMC1-01-00A0.dtbo ...
1605 bytes read in 7 ms (223.6 KiB/s)
uboot_overlays: uboot loading of [BB-HDMI-TDA998x-00A0.dtbo] disabled by /boot/uEnv.txt [disable_uboot_overlay_video=1]...
loading /boot/initrd.img-5.10.168-ti-r69 ...
6867909 bytes read in 441 ms (14.9 MiB/s)
debug: [console=ttyS0,115200n8 bone_capemgr.uboot_capemgr_enabled=1 root=/dev/mmcblk0p1 ro rootfstype=ext4 rootwait init=/usr/sbin/init-beagle-flasher] ...
debug: [bootz 0x82000000 0x88080000:68cbc5 88000000] ...
Kernel image @ 0x82000000 [ 0x000000 - 0xac0200 ]
## Flattened Device Tree blob at 88000000
   Booting using the fdt blob at 0x88000000
   Loading Ramdisk to 8f973000, end 8ffffbc5 ... OK
   Loading Device Tree to 8f8dc000, end 8f972fff ... OK

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 5.10.168-ti-r69 (voodoo@rpi4b4g-09) (gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1bullseye SMP PREEMPT Mon Aug 7 17:44:31 UTC 2023
[    0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] OF: fdt: Machine model: TI AM335x BeagleBone Black
[    0.000000] Memory policy: Data cache writeback
[    0.000000] efi: UEFI not found.
[    0.000000] cma: Reserved 48 MiB at 0x9c800000
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x0000000080000000-0x000000009fdfffff]
[    0.000000]   HighMem  empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000080000000-0x000000009fdfffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000009fdfffff]
[    0.000000] CPU: All CPU(s) started in SVC mode.
[    0.000000] AM335X ES2.1 (sgx neon)
[    0.000000] percpu: Embedded 21 pages/cpu s54732 r8192 d23092 u86016
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 129412
[    0.000000] Kernel command line: console=ttyS0,115200n8 bone_capemgr.uboot_capemgr_enabled=1 root=/dev/mmcblk0p1 ro rootfstype=ext4 rootwait init=/usr/sbin/init-beagle-flasher
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:on, heap free:off
[    0.000000] Memory: 438160K/522240K available (14336K kernel code, 1444K rwdata, 3960K rodata, 1024K init, 446K bss, 34928K reserved, 49152K cma-reserved, 0K highmem)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU event tracing is enabled.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] 	Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[    0.000000] IRQ: Found an INTC at 0x(ptrval) (revision 5.0) with 128 interrupts
[    0.000000] TI gptimer clocksource: always-on /ocp/interconnect@44c00000/segment@200000/target-module@31000
[    0.000011] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns
[    0.000030] clocksource: dmtimer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
[    0.000419] TI gptimer clockevent: 24000000 Hz at /ocp/interconnect@48000000/segment@0/target-module@40000
[    0.002569] Console: colour dummy device 80x30
[    0.002663] Calibrating delay loop... 995.32 BogoMIPS (lpj=1990656)
[    0.048475] pid_max: default: 32768 minimum: 301
[    0.049124] LSM: Security Framework initializing
[    0.049249] Yama: becoming mindful.
[    0.049551] AppArmor: AppArmor initialized
[    0.049573] TOMOYO Linux initialized
[    0.049772] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.049791] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.051489] CPU: Testing write buffer coherency: ok
[    0.051577] CPU0: Spectre v2: using BPIALL workaround
[    0.072907] Setting up static identity map for 0x80100000 - 0x80100060
[    0.080495] rcu: Hierarchical SRCU implementation.
[    0.089740] EFI services will not be available.
[    0.100508] smp: Bringing up secondary CPUs ...
[    0.100533] smp: Brought up 1 node, 1 CPU
[    0.100546] SMP: Total of 1 processors activated (995.32 BogoMIPS).
[    0.100557] CPU: All CPU(s) started in SVC mode.
[    0.101497] devtmpfs: initialized
[    0.144834] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
[    0.145313] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.145358] futex hash table entries: 256 (order: 2, 16384 bytes, linear)
[    0.149171] pinctrl core: initialized pinctrl subsystem
[    0.150379] DMI not present or invalid.
[    0.151330] NET: Registered protocol family 16
[    0.154575] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.195054] l3-aon-clkctrl:0000:0: failed to disable
[    0.195826] audit: initializing netlink subsys (disabled)
[    0.197442] thermal_sys: Registered thermal governor 'fair_share'
[    0.197457] thermal_sys: Registered thermal governor 'bang_bang'
[    0.197474] thermal_sys: Registered thermal governor 'step_wise'
[    0.197484] thermal_sys: Registered thermal governor 'user_space'
[    0.197494] thermal_sys: Registered thermal governor 'power_allocator'
[    0.198432] audit: type=2000 audit(0.184:1): state=initialized audit_enabled=0 res=1
[    0.198486] cpuidle: using governor ladder
[    0.198535] cpuidle: using governor menu
[    6.070291] hw-breakpoint: debug architecture 0x4 unsupported.
[    6.120968] Kprobes globally optimized
[    6.144901] raid6: skip pq benchmark and using algorithm neonx8
[    6.144935] raid6: using neon recovery algorithm
[    6.152613] iommu: Default domain type: Translated
[    6.157366] SCSI subsystem initialized
[    6.161072] usbcore: registered new interface driver usbfs
[    6.161174] usbcore: registered new interface driver hub
[    6.161238] usbcore: registered new device driver usb
[    6.162512] mc: Linux media interface: v0.10
[    6.162567] videodev: Linux video capture interface: v2.00
[    6.162792] pps_core: LinuxPPS API ver. 1 registered
[    6.162806] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
[    6.162835] PTP clock support registered
[    6.165485] NetLabel: Initializing
[    6.165510] NetLabel:  domain hash size = 128
[    6.165520] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    6.165616] NetLabel:  unlabeled traffic allowed by default
[    6.166877] clocksource: Switched to clocksource dmtimer
[    7.230077] VFS: Disk quotas dquot_6.6.0
[    7.230235] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    7.230532] FS-Cache: Loaded
[    7.231025] CacheFiles: Loaded
[    7.232096] AppArmor: AppArmor Filesystem Enabled
[    7.245807] NET: Registered protocol family 2
[    7.246109] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    7.248061] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
[    7.248382] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear)
[    7.248454] TCP bind hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    7.248517] TCP: Hash tables configured (established 4096 bind 4096)
[    7.248834] MPTCP token hash table entries: 512 (order: 1, 8192 bytes, linear)
[    7.248933] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[    7.248970] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[    7.249246] NET: Registered protocol family 1
[    7.262752] RPC: Registered named UNIX socket transport module.
[    7.262776] RPC: Registered udp transport module.
[    7.262786] RPC: Registered tcp transport module.
[    7.262796] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    7.262814] NET: Registered protocol family 44
[    7.263801] Trying to unpack rootfs image as initramfs...
[    7.625819] Freeing initrd memory: 6708K
[    7.626990] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available
[    7.632932] Initialise system trusted keyrings
[    7.633425] workingset: timestamp_bits=14 max_order=17 bucket_order=3
[    7.641924] zbud: loaded
[    7.650116] NFS: Registering the id_resolver key type
[    7.650222] Key type id_resolver registered
[    7.650235] Key type id_legacy registered
[    7.650434] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    7.650450] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[    7.650501] jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
[    7.651792] fuse: init (API version 7.32)
[    7.740045] xor: automatically using best checksumming function   neon
[    7.740080] Key type asymmetric registered
[    7.740092] Asymmetric key parser 'x509' registered
[    7.740177] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
[    7.744578] io scheduler mq-deadline registered
[    8.517627] ti-sysc: probe of 44e31000.target-module failed with error -16
[    8.653544] omap_i2c 4802a000.i2c: bus 1 rev0.11 at 100 kHz
[    8.681351] ti-sysc: probe of 48040000.target-module failed with error -16
[    8.894037] omap-mailbox 480c8000.mailbox: omap mailbox rev 0x400
[    9.017429] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz
[    9.528900] debugfs: Directory '49000000.dma' with parent 'dmaengine' already present!
[    9.528952] edma 49000000.dma: TI EDMA DMA engine driver
[    9.559599] pinctrl-single 44e10800.pinmux: 142 pins, size 568
[    9.561095] gpio-of-helper ocp:cape-universal: Failed to get gpio property of 'P8_03'
[    9.561121] gpio-of-helper ocp:cape-universal: Failed to create gpio entry
[    9.583514] Serial: 8250/16550 driver, 6 ports, IRQ sharing disabled
[    9.588524] printk: console [ttyS0] disabled
[    9.588649] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 20, base_baud = 3000000) is a 8250
[   10.439544] printk: console [ttyS0] enabled
[   10.445783] 48022000.serial: ttyS1 at MMIO 0x48022000 (irq = 27, base_baud = 3000000) is a 8250
[   10.456637] 48024000.serial: ttyS2 at MMIO 0x48024000 (irq = 28, base_baud = 3000000) is a 8250
[   10.467544] 481a6000.serial: ttyS3 at MMIO 0x481a6000 (irq = 41, base_baud = 3000000) is a 8250
[   10.478004] 481a8000.serial: ttyS4 at MMIO 0x481a8000 (irq = 42, base_baud = 3000000) is a 8250
[   10.488599] 481aa000.serial: ttyS5 at MMIO 0x481aa000 (irq = 43, base_baud = 3000000) is a 8250
[   10.502297] omap_rng 48310000.rng: Random Number Generator ver. 20
[   10.508912] random: crng init done
[   10.531367] at24 2-0054: supply vcc not found, using dummy regulator
[   10.566337] at24 2-0055: supply vcc not found, using dummy regulator
[   10.602307] at24 2-0056: supply vcc not found, using dummy regulator
[   10.638257] at24 2-0057: supply vcc not found, using dummy regulator
[   10.789840] mdio_bus 4a101000.mdio: mii_bus 4a101000.mdio couldn't get reset GPIO
[   10.798606] cpsw 4a100000.ethernet: initialized cpsw ale version 1.4
[   10.805208] cpsw 4a100000.ethernet: ALE Table size 1024
[   10.810682] cpsw 4a100000.ethernet: cpts: overflow check period 1250 (jiffies)
[   10.818110] cpsw 4a100000.ethernet: Detected MACID = 68:5e:1c:ca:13:43
[   10.828387] usbcore: registered new interface driver smsc95xx
[   10.837077] am335x-phy-driver 47401300.usb-phy: supply vcc not found, using dummy regulator
[   10.845946] am335x-phy-driver 47401300.usb-phy: dummy supplies not allowed for exclusive requests
[   10.860654] am335x-phy-driver 47401b00.usb-phy: supply vcc not found, using dummy regulator
[   10.869675] am335x-phy-driver 47401b00.usb-phy: dummy supplies not allowed for exclusive requests
[   10.885476] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   10.892286] ehci-platform: EHCI generic platform driver
[   10.898278] ehci-omap: OMAP-EHCI Host Controller driver
[   10.917516] musb-hdrc musb-hdrc.1: MUSB HDRC host driver
[   10.923205] musb-hdrc musb-hdrc.1: new USB bus registered, assigned bus number 1
[   10.931035] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[   10.939370] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   10.946644] usb usb1: Product: MUSB HDRC host driver
[   10.951650] usb usb1: Manufacturer: Linux 5.10.168-ti-r69 musb-hcd
[   10.957876] usb usb1: SerialNumber: musb-hdrc.1
[   10.963433] hub 1-0:1.0: USB hub found
[   10.967384] hub 1-0:1.0: 1 port detected
[   10.986686] omap_rtc 44e3e000.rtc: registered as rtc0
[   10.992706] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01T00:00:00 UTC (946684800)
[   11.003681] i2c /dev entries driver
[   11.013514] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
[   11.021308] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=0)
[   11.029874] softdog:              soft_reboot_cmd=<not set> soft_active_on_boot=0
[   11.039869] cpuidle: enable-method property 'ti,am3352' found operations
[   11.048963] sdhci: Secure Digital Host Controller Interface driver
[   11.055284] sdhci: Copyright(c) Pierre Ossman
[   11.059686] sdhci-pltfm: SDHCI platform and OF driver helper
[   11.075854] sdhci-omap 481d8000.mmc: supply vqmmc not found, using dummy regulator
[   11.083784] ledtrig-cpu: registered to indicate activity on CPUs
[   11.092396] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2
[   11.099440] omap-aes 53500000.aes: will run requests pump with realtime priority
[   11.111547] omap-sham 53100000.sham: hw accel on OMAP rev 4.3
[   11.117848] omap-sham 53100000.sham: will run requests pump with realtime priority
[   11.130559] hid: raw HID events driver (C) Jiri Kosina
[   11.137068] usbcore: registered new interface driver usbhid
[   11.142936] mmc1: SDHCI controller on 481d8000.mmc [481d8000.mmc] using External DMA
[   11.150989] usbhid: USB HID core driver
[   11.155822] remoteproc remoteproc0: wkup_m3 is available
[   11.171631] drop_monitor: Initializing network drop monitor service
[   11.179060] NET: Registered protocol family 10
[   11.219050] mmc1: new high speed MMC card at address 0001
[   11.236424] mmcblk1: mmc1:0001 M62704 3.56 GiB
[   11.247840] mmcblk1boot0: mmc1:0001 M62704 partition 1 2.00 MiB
[   11.259783] mmcblk1boot1: mmc1:0001 M62704 partition 2 2.00 MiB
[   11.269115] mmcblk1rpmb: mmc1:0001 M62704 partition 3 512 KiB, chardev (240:0)
[   11.288364]  mmcblk1: p1
[   11.300047] Segment Routing with IPv6
[   11.304150] mip6: Mobile IPv6
[   11.309726] NET: Registered protocol family 17
[   11.320502] Key type dns_resolver registered
[   11.325729] mpls_gso: MPLS GSO support
[   11.329883] ThumbEE CPU extension supported.
[   11.334273] Registering SWP/SWPB emulation handler
[   11.339523] omap_voltage_late_init: Voltage driver support not added
[   11.346951] registered taskstats version 1
[   11.351120] Loading compiled-in X.509 certificates
[   11.356121] zswap: loaded using pool lzo/zbud
[   11.365427] Key type .fscrypt registered
[   11.369489] Key type fscrypt-provisioning registered
[   11.381744] Btrfs loaded, crc32c=crc32c-generic
[   11.386517] AppArmor: AppArmor sha1 policy hashing enabled
[   11.413290] OMAP GPIO hardware version 0.1
[   11.443680] tps65217-pmic: Failed to locate of_node [id: -1]
[   11.460617] tps65217-bl: Failed to locate of_node [id: -1]
[   11.469371] tps6521x_pwrbutton tps65217-pwrbutton: DMA mask not set
[   11.476754] input: tps65217_pwr_but as /devices/platform/ocp/44c00000.interconnect/44c00000.interconnect:segment@200000/44e0b000.target-module/44e0b000.i2c/i2c-0/0-0024/tps65217-pwrbutton/input/input0
[   11.495373] tps65217 0-0024: TPS65217 ID 0xe version 1.2
[   11.502431] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[   11.509656] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz
[   11.523342] gpio-of-helper ocp:cape-universal: Allocated GPIO id=0 name='P8_03'
[   11.531019] gpio-of-helper ocp:cape-universal: Allocated GPIO id=1 name='P8_04'
[   11.538584] gpio-of-helper ocp:cape-universal: Allocated GPIO id=2 name='P8_05'
[   11.546127] gpio-of-helper ocp:cape-universal: Allocated GPIO id=3 name='P8_06'
[   11.553992] gpio-of-helper ocp:cape-universal: Allocated GPIO id=4 name='P8_07'
[   11.561598] gpio-of-helper ocp:cape-universal: Allocated GPIO id=5 name='P8_08'
[   11.569139] gpio-of-helper ocp:cape-universal: Allocated GPIO id=6 name='P8_09'
[   11.576694] gpio-of-helper ocp:cape-universal: Allocated GPIO id=7 name='P8_10'
[   11.584246] gpio-of-helper ocp:cape-universal: Allocated GPIO id=8 name='P8_11'
[   11.591801] gpio-of-helper ocp:cape-universal: Allocated GPIO id=9 name='P8_12'
[   11.599458] gpio-of-helper ocp:cape-universal: Allocated GPIO id=10 name='P8_13'
[   11.607110] gpio-of-helper ocp:cape-universal: Allocated GPIO id=11 name='P8_14'
[   11.614761] gpio-of-helper ocp:cape-universal: Allocated GPIO id=12 name='P8_15'
[   11.622393] gpio-of-helper ocp:cape-universal: Allocated GPIO id=13 name='P8_16'
[   11.630015] gpio-of-helper ocp:cape-universal: Allocated GPIO id=14 name='P8_17'
[   11.637655] gpio-of-helper ocp:cape-universal: Allocated GPIO id=15 name='P8_18'
[   11.645287] gpio-of-helper ocp:cape-universal: Allocated GPIO id=16 name='P8_19'
[   11.652931] gpio-of-helper ocp:cape-universal: Allocated GPIO id=17 name='P8_20'
[   11.660599] gpio-of-helper ocp:cape-universal: Allocated GPIO id=18 name='P8_21'
[   11.668229] gpio-of-helper ocp:cape-universal: Allocated GPIO id=19 name='P8_22'
[   11.675863] gpio-of-helper ocp:cape-universal: Allocated GPIO id=20 name='P8_23'
[   11.683477] gpio-of-helper ocp:cape-universal: Allocated GPIO id=21 name='P8_24'
[   11.691135] gpio-of-helper ocp:cape-universal: Allocated GPIO id=22 name='P8_25'
[   11.698779] gpio-of-helper ocp:cape-universal: Allocated GPIO id=23 name='P8_26'
[   11.706403] gpio-of-helper ocp:cape-universal: Allocated GPIO id=24 name='P8_27'
[   11.714049] gpio-of-helper ocp:cape-universal: Allocated GPIO id=25 name='P8_28'
[   11.721681] gpio-of-helper ocp:cape-universal: Allocated GPIO id=26 name='P8_29'
[   11.729296] gpio-of-helper ocp:cape-universal: Allocated GPIO id=27 name='P8_30'
[   11.736932] gpio-of-helper ocp:cape-universal: Allocated GPIO id=28 name='P8_31'
[   11.744562] gpio-of-helper ocp:cape-universal: Allocated GPIO id=29 name='P8_32'
[   11.752193] gpio-of-helper ocp:cape-universal: Allocated GPIO id=30 name='P8_33'
[   11.759954] gpio-of-helper ocp:cape-universal: Allocated GPIO id=31 name='P8_34'
[   11.767618] gpio-of-helper ocp:cape-universal: Allocated GPIO id=32 name='P8_35'
[   11.775279] gpio-of-helper ocp:cape-universal: Allocated GPIO id=33 name='P8_36'
[   11.782928] gpio-of-helper ocp:cape-universal: Allocated GPIO id=34 name='P8_37'
[   11.790560] gpio-of-helper ocp:cape-universal: Allocated GPIO id=35 name='P8_38'
[   11.798195] gpio-of-helper ocp:cape-universal: Allocated GPIO id=36 name='P8_39'
[   11.805816] gpio-of-helper ocp:cape-universal: Allocated GPIO id=37 name='P8_40'
[   11.813480] gpio-of-helper ocp:cape-universal: Allocated GPIO id=38 name='P8_41'
[   11.821119] gpio-of-helper ocp:cape-universal: Allocated GPIO id=39 name='P8_42'
[   11.828748] gpio-of-helper ocp:cape-universal: Allocated GPIO id=40 name='P8_43'
[   11.836388] gpio-of-helper ocp:cape-universal: Allocated GPIO id=41 name='P8_44'
[   11.844006] gpio-of-helper ocp:cape-universal: Allocated GPIO id=42 name='P8_45'
[   11.851659] gpio-of-helper ocp:cape-universal: Allocated GPIO id=43 name='P8_46'
[   11.859298] gpio-of-helper ocp:cape-universal: Allocated GPIO id=44 name='P9_11'
[   11.866961] gpio-of-helper ocp:cape-universal: Allocated GPIO id=45 name='P9_12'
[   11.874610] gpio-of-helper ocp:cape-universal: Allocated GPIO id=46 name='P9_13'
[   11.882250] gpio-of-helper ocp:cape-universal: Allocated GPIO id=47 name='P9_14'
[   11.889887] gpio-of-helper ocp:cape-universal: Allocated GPIO id=48 name='P9_15'
[   11.897526] gpio-of-helper ocp:cape-universal: Allocated GPIO id=49 name='P9_16'
[   11.905152] gpio-of-helper ocp:cape-universal: Allocated GPIO id=50 name='P9_17'
[   11.912789] gpio-of-helper ocp:cape-universal: Allocated GPIO id=51 name='P9_18'
[   11.920410] gpio-of-helper ocp:cape-universal: Allocated GPIO id=52 name='P9_19'
[   11.928040] gpio-of-helper ocp:cape-universal: Allocated GPIO id=53 name='P9_20'
[   11.935698] gpio-of-helper ocp:cape-universal: Allocated GPIO id=54 name='P9_21'
[   11.943323] gpio-of-helper ocp:cape-universal: Allocated GPIO id=55 name='P9_22'
[   11.950994] gpio-of-helper ocp:cape-universal: Allocated GPIO id=56 name='P9_23'
[   11.958638] gpio-of-helper ocp:cape-universal: Allocated GPIO id=57 name='P9_24'
[   11.966576] gpio-of-helper ocp:cape-universal: Allocated GPIO id=58 name='P9_25'
[   11.974275] gpio-of-helper ocp:cape-universal: Allocated GPIO id=59 name='P9_26'
[   11.981934] gpio-of-helper ocp:cape-universal: Allocated GPIO id=60 name='P9_27'
[   11.989584] gpio-of-helper ocp:cape-universal: Allocated GPIO id=61 name='P9_28'
[   11.997206] gpio-of-helper ocp:cape-universal: Allocated GPIO id=62 name='P9_29'
[   12.004838] gpio-of-helper ocp:cape-universal: Allocated GPIO id=63 name='P9_30'
[   12.012492] gpio-of-helper ocp:cape-universal: Allocated GPIO id=64 name='P9_31'
[   12.020150] gpio-of-helper ocp:cape-universal: Allocated GPIO id=65 name='P9_41'
[   12.027790] gpio-of-helper ocp:cape-universal: Allocated GPIO id=66 name='P9_91'
[   12.035426] gpio-of-helper ocp:cape-universal: Allocated GPIO id=67 name='P9_42'
[   12.043068] gpio-of-helper ocp:cape-universal: Allocated GPIO id=68 name='P9_92'
[   12.050533] gpio-of-helper ocp:cape-universal: ready
[   12.094935] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6, bus freq 1000000
[   12.120097] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720
[   12.139748] omap_gpio 44e07000.gpio: Could not set line 6 debounce to 200000 microseconds (-22)
[   12.150143] of_cfs_init
[   12.153072] of_cfs_init: OK
[   12.158326] sdhci-omap 48060000.mmc: Got CD GPIO
[   12.163319] sdhci-omap 48060000.mmc: supply vqmmc not found, using dummy regulator
[   12.203018] mmc0: SDHCI controller on 48060000.mmc [48060000.mmc] using External DMA
[   12.213791] Freeing unused kernel memory: 1024K
[   12.219261] Run /init as init process
Loading, please wait...
[   12.259140] mmc0: new high speed SDHC card at address 0001
[   12.275793] mmcblk0: mmc0:0001 SD32G 29.2 GiB
[   12.284623]  mmcblk0: p1
Starting version 247.3-7+deb11u4
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
Begin: Running /scripts/local-premount ... Scanning for Btrfs filesystems
done.
Begin: Will now check root file system ... fsck from util-linux 2.36.1
[/sbin/fsck.ext4 (1) -- /dev/mmcblk0p1] fsck.ext4 -a -C0 /dev/mmcblk0p1
rootfs: clean, 51066/1913184 files, 654683/7643648 blocks
done.
[   19.748801] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
done.
Begin: Running /scripts/local-bottom ... done.
Begin: Running /scripts/init-bottom ... done.
--------------------------------------------------------------------------------
Version: [1.20230710.0, merged generic cleanups...]
--------------------------------------------------------------------------------
cat /etc/default/beagle-flasher:
--------------------------------------------------------------------------------
#debug_over_display=tty0
source=/dev/mmcblk0
destination=/dev/mmcblk1
rfs_partition=single
rfs_rootfs_type=ext4
rfs_rootfs_startmb=4
bootloader=/opt/u-boot/bb-u-boot-am335x-evm/install-mmcblk1.sh
flash_back=beaglebone-black-emmc-to-microsd
--------------------------------------------------------------------------------
INFO: Giving system time to stablize...
--------------------------------------------------------------------------------
5
4
3
2
1
--------------------------------------------------------------------------------
INFO: Preparing /tmp
INFO: [mount -t tmpfs tmpfs /tmp]
--------------------------------------------------------------------------------
INFO: Preparing sysctl
INFO: [sysctl: vm.min_free_kbytes=[2792]
INFO: [sysctl: setting: [sysctl -w vm.min_free_kbytes=16384]
vm.min_free_kbytes = 16384
--------------------------------------------------------------------------------
INFO: [lsblk -i]
NAME         MAJ:MIN RM  SIZE RO TYPE MOUNTPOINT
mmcblk1      179:0    0  3.6G  0 disk
`-mmcblk1p1  179:1    0  3.5G  0 part
mmcblk1boot0 179:256  0    2M  1 disk
mmcblk1boot1 179:512  0    2M  1 disk
mmcblk0      179:768  0 29.2G  0 disk
`-mmcblk0p1  179:769  0 29.2G  0 part /
--------------------------------------------------------------------------------
INFO: copying [/dev/mmcblk0] -> [/dev/mmcblk1]
--------------------------------------------------------------------------------
INFO: [source=/dev/mmcblk0] is a valid block device
INFO: [destination=/dev/mmcblk1] is a valid block device
INFO: flush_cache: [blockdev --flushbufs /dev/mmcblk1]
--------------------------------------------------------------------------------
INFO: Erasing: [/dev/mmcblk1]
INFO: flush_cache: [blockdev --flushbufs /dev/mmcblk1]
--------------------------------------------------------------------------------
INFO: [dd if=/dev/zero of=/dev/mmcblk1 bs=1M count=108 status=progress]
90177536 bytes (90 MB, 86 MiB) copied, 1 s, 89.4 MB/s
108+0 records in
108+0 records out
113246208 bytes (113 MB, 108 MiB) copied, 4.62926 s, 24.5 MB/s
--------------------------------------------------------------------------------
INFO: [dd if=/dev/mmcblk1 of=/dev/null bs=1M count=108 status=progress]
44040192 bytes (44 MB, 42 MiB) copied, 1 s, 43.8 MB/s88080384 bytes (88 MB, 84 MiB) copied, 2 s, 43.9 MB/s
108+0 records in
108+0 records out
113246208 bytes (113 MB, 108 MiB) copied, 2.67142 s, 42.4 MB/s
--------------------------------------------------------------------------------
INFO: flush_cache: [blockdev --flushbufs /dev/mmcblk1]
--------------------------------------------------------------------------------
INFO: Erasing: [/dev/mmcblk1] complete
--------------------------------------------------------------------------------
INFO: [/bin/bash /opt/u-boot/bb-u-boot-am335x-evm/install-mmcblk1.sh]
dd if=/opt/u-boot/bb-u-boot-am335x-evm/MLO of=/dev/mmcblk1 count=2 seek=1 bs=128k
0+1 records in
0+1 records out
106028 bytes (106 kB, 104 KiB) copied, 0.0128617 s, 8.2 MB/s
dd if=/opt/u-boot/bb-u-boot-am335x-evm/u-boot-dtb.img of=/dev/mmcblk1 count=4 seek=1 bs=384k
2+1 records in
2+1 records out
987236 bytes (987 kB, 964 KiB) copied, 0.0855904 s, 11.5 MB/s
--------------------------------------------------------------------------------
INFO: Partitioning: /dev/mmcblk1
INFO: /sbin/sfdisk: [sfdisk from util-linux 2.36.1]
INFO: /sbin/sfdisk: [/sbin/sfdisk --force --wipe-partitions always /dev/mmcblk1]
INFO: /sbin/sfdisk: [4M,,L,*]
--------------------------------------------------------------------------------
Checking that no-one is using this disk right now ... OK

Disk /dev/mmcblk1: 3.56 GiB, 3825205248 bytes, 7471104 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes

>>> Created a new DOS disklabel with disk identifier 0x90c85b59.
/dev/mmcblk1p1: Created a new partition 1 of type 'Linux' and of size 3.6 GiB.
/dev/mmcblk1p2: Done.

New situation:
Disklabel type: dos
Disk identifier: 0x90c85b59

Device         Boot Start     End Sectors  Size Id Type
/dev/mmcblk1p1 *     8192 7471103 7462912  3.6G 83 Linux

The partition table has been altered.
Calling ioctl() to re-read partition table.[   33.582262]  mmcblk1: p1

Syncing disks.
INFO: flush_cache: [blockdev --flushbufs /dev/mmcblk1]
--------------------------------------------------------------------------------
INFO: Formatting: /dev/mmcblk1
/sbin/mkfs.ext4  /dev/mmcblk1p1 -L rootfs
mke2fs 1.46.2 (28-Feb-2021)
Discarding device blocks:   4096/932864528384/932864             done
Creating filesystem with 932864 4k blocks and 233392 inodes
Filesystem UUID: 35b683bf-78a6-4e47-b4ec-507a1eda7e8c
Superblock backups stored on blocks:
	32768, 98304, 163840, 229376, 294912, 819200, 884736

Allocating group tables:  0/29     done
Writing inode tables:  0/29     done
Creating journal (16384 blocks): done
Writing superblocks and filesystem accounting information:  0/29     done

--------------------------------------------------------------------------------
INFO: flush_cache: [blockdev --flushbufs /dev/mmcblk1]
--------------------------------------------------------------------------------
INFO: Formatting: /dev/mmcblk1 complete
--------------------------------------------------------------------------------
INFO: Copying: /dev/mmcblk0p1 -> /dev/mmcblk1p1
INFO: [mount /dev/mmcblk1p1 /tmp/rootfs/ -o async,noatime]
[   41.809619] EXT4-fs (mmcblk1p1): mounted filesystem with ordered data mode. Opts: (null)
INFO: /usr/bin/rsync: (-aHAXx) [/ -> /tmp/rootfs/]
--------------------------------------------------------------------------------
INFO: flush_cache: [blockdev --flushbufs /dev/mmcblk1]
--------------------------------------------------------------------------------
INFO: Copying: Kernel modules
INFO: /usr/bin/rsync: (-aHAXx) /lib/modules/5.10.168-ti-r69/ -> /tmp/rootfs/lib/modules/5.10.168-ti-r69/
--------------------------------------------------------------------------------
INFO: flush_cache: [blockdev --flushbufs /dev/mmcblk1]
--------------------------------------------------------------------------------
INFO: Generating: /etc/fstab
INFO: [cat /tmp/rootfs/etc/fstab]
# /etc/fstab: static file system information.
#
/dev/mmcblk1p1  /  ext4  noatime,errors=remount-ro  0  1
debugfs  /sys/kernel/debug  debugfs  mode=755,uid=root,gid=gpio,defaults  0  0
--------------------------------------------------------------------------------
INFO: flush_cache: [blockdev --flushbufs /dev/mmcblk1]
--------------------------------------------------------------------------------
INFO: [cat /tmp/rootfs/boot/uEnv.txt]
#Docs: http://elinux.org/Beagleboard:U-boot_partitioning_layout_2.0

uname_r=5.10.168-ti-r69
#uuid=
#dtb=

###U-Boot Overlays###
###Documentation: http://elinux.org/Beagleboard:BeagleBoneBlack_Debian#U-Boot_Overlays
###Master Enable
enable_uboot_overlays=1
###
###Overide capes with eeprom
#uboot_overlay_addr0=<file0>.dtbo
#uboot_overlay_addr1=<file1>.dtbo
#uboot_overlay_addr2=<file2>.dtbo
#uboot_overlay_addr3=<file3>.dtbo
###
###Additional custom capes
uboot_overlay_addr4=/lib/firmware/BB-UART4-00A0.dtbo
uboot_overlay_addr5=/lib/firmware/BB-UART2-00A0.dtbo
#uboot_overlay_addr6=<file6>.dtbo
#uboot_overlay_addr7=<file7>.dtbo
###
###Custom Cape
#dtb_overlay=<file8>.dtbo
###
###Disable auto loading of virtual capes (emmc/video/wireless/adc)
#disable_uboot_overlay_emmc=1
disable_uboot_overlay_video=1
disable_uboot_overlay_audio=1
disable_uboot_overlay_wireless=1
#disable_uboot_overlay_adc=1
###
###Cape Universal Enable
enable_uboot_cape_universal=1
###
###Debug: disable uboot autoload of Cape
#disable_uboot_overlay_addr0=1
#disable_uboot_overlay_addr1=1
#disable_uboot_overlay_addr2=1
#disable_uboot_overlay_addr3=1
###
###U-Boot fdt tweaks... (60000 = 384KB)
#uboot_fdt_buffer=0x60000
###U-Boot Overlays###

console=ttyS0,115200n8
cmdline=coherent_pool=1M net.ifnames=0 lpj=1990656 rng_core.default_quality=100 quiet

#In the event of edid real failures, uncomment this next line:
#cmdline=coherent_pool=1M net.ifnames=0 lpj=1990656 rng_core.default_quality=100 quiet video=HDMI-A-1:1024x768@60e

#Use an overlayfs on top of a read-only root filesystem:
#cmdline=coherent_pool=1M net.ifnames=0 lpj=1990656 rng_core.default_quality=100 quiet overlayroot=tmpfs

##enable Generic eMMC Flasher:
#cmdline=init=/usr/sbin/init-beagle-flasher
--------------------------------------------------------------------------------
INFO: [cp -v /etc/beagle-flasher/beaglebone-black-emmc-to-microsd /tmp/rootfs/etc/default/beagle-flasher]
'/etc/beagle-flasher/beaglebone-black-emmc-to-microsd' -> '/tmp/rootfs/etc/default/beagle-flasher'
--------------------------------------------------------------------------------
INFO: [cat /tmp/rootfs/etc/default/generic-sys-mods]
#This file is sourced by /usb/bin/bb-growpart
ROOT_DRIVE=/dev/mmcblk1
ROOT_PARTITION=1
ARCH_SOC_MODULES=am335x
--------------------------------------------------------------------------------
INFO: flush_cache: [blockdev --flushbufs /dev/mmcblk1]
--------------------------------------------------------------------------------
Copying: /dev/mmcblk0p1 -> /dev/mmcblk1p1 complete
--------------------------------------------------------------------------------
INFO: flush_cache: [blockdev --flushbufs /dev/mmcblk1]
--------------------------------------------------------------------------------
INFO: [umount /tmp/rootfs/ || umount -l /tmp/rootfs/ || write_failure]
--------------------------------------------------------------------------------
INFO: [umount /tmp || true]
--------------------------------------------------------------------------------
INFO: flush_cache: [blockdev --flushbufs /dev/mmcblk1]
--------------------------------------------------------------------------------
INFO: Force writeback of eMMC buffers by Syncing: /dev/mmcblk1
INFO: [dd if=/dev/mmcblk1 of=/dev/null count=100000 status=progress]
36338688 bytes (36 MB, 35 MiB) copied, 1 s, 36.3 MB/s
100000+0 records in
100000+0 records out
51200000 bytes (51 MB, 49 MiB) copied, 1.48692 s, 34.4 MB/s
--------------------------------------------------------------------------------
INFO: flush_cache: [blockdev --flushbufs /dev/mmcblk1]
--------------------------------------------------------------------------------
INFO: [We are init][  327.139463] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.

[  327.425064] systemd[1]: System time before build time, advancing clock.
[  327.550734] systemd[1]: systemd 247.3-7+deb11u4 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
[  327.575931] systemd[1]: Detected architecture arm.

Welcome to Debian GNU/Linux 11 (bullseye)!

[  327.600869] systemd[1]: Set hostname to <BeagleBone>.
[  329.376714] systemd[1]: Queued start job for default target Graphical Interface.
[  329.384439] systemd[1]: Unnecessary job for /dev/bone/uart/0 was removed.
[  329.391412] systemd[1]: Unnecessary job for /sys/devices/platform/ocp/44c00000.interconnect/44c00000.interconnect:segment@200000/44e09050.target-module/44e09000.serial/tty/ttyS0 was removed.
[  329.421074] systemd[1]: Created slice system-getty.slice.
[  OK  ] Created slice system-getty.slice.
[  329.446133] systemd[1]: Created slice system-mbusd.slice.
[  OK  ] Created slice system-mbusd.slice.
[  329.470239] systemd[1]: Created slice system-modprobe.slice.
[  OK  ] Created slice system-modprobe.slice.
[  329.493994] systemd[1]: Created slice system-serial\x2dgetty.slice.
[  OK  ] Created slice system-serial\x2dgetty.slice.
[  329.517603] systemd[1]: Created slice User and Session Slice.
[  OK  ] Created slice User and Session Slice.
[  329.540013] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[  OK  ] Started Dispatch Password …ts to Console Directory Watch.
[  329.563838] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[  OK  ] Started Forward Password R…uests to Wall Directory Watch.
[  329.588897] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[  OK  ] Set up automount Arbitrary…s File System Automount Point.
[  329.615709] systemd[1]: Reached target Local Encrypted Volumes.
[  OK  ] Reached target Local Encrypted Volumes.
[  329.639775] systemd[1]: Reached target Paths.
[  OK  ] Reached target Paths.
[  329.659301] systemd[1]: Reached target Remote File Systems.
[  OK  ] Reached target Remote File Systems.
[  329.683275] systemd[1]: Reached target Slices.
[  OK  ] Reached target Slices.
[  329.703337] systemd[1]: Reached target Swap.
[  OK  ] Reached target Swap.
[  329.724907] systemd[1]: Listening on Syslog Socket.
[  OK  ] Listening on Syslog Socket.
[  329.748399] systemd[1]: Listening on fsck to fsckd communication Socket.
[  OK  ] Listening on fsck to fsckd communication Socket.
[  329.771888] systemd[1]: Listening on initctl Compatibility Named Pipe.
[  OK  ] Listening on initctl Compatibility Named Pipe.
[  329.796948] systemd[1]: Listening on Journal Audit Socket.
[  OK  ] Listening on Journal Audit Socket.
[  329.820469] systemd[1]: Listening on Journal Socket (/dev/log).
[  OK  ] Listening on Journal Socket (/dev/log).
[  329.844601] systemd[1]: Listening on Journal Socket.
[  OK  ] Listening on Journal Socket.
[  329.868902] systemd[1]: Listening on Network Service Netlink Socket.
[  OK  ] Listening on Network Service Netlink Socket.
[  329.892805] systemd[1]: Listening on udev Control Socket.
[  OK  ] Listening on udev Control Socket.
[  329.916263] systemd[1]: Listening on udev Kernel Socket.
[  OK  ] Listening on udev Kernel Socket.
[  329.940573] systemd[1]: Condition check resulted in Huge Pages File System being skipped.
[  329.957002] systemd[1]: Mounting POSIX Message Queue File System...
         Mounting POSIX Message Queue File System...
[  329.997612] systemd[1]: Mounting /sys/kernel/debug...
         Mounting /sys/kernel/debug...
[  330.045302] systemd[1]: Mounting Kernel Trace File System...
         Mounting Kernel Trace File System...
[  330.090052] systemd[1]: Starting Create list of static device nodes for the current kernel...
         Starting Create list of st…odes for the current kernel...
[  330.132458] systemd[1]: Starting Load Kernel Module configfs...
         Starting Load Kernel Module configfs...
[  330.172548] systemd[1]: Starting Load Kernel Module drm...
         Starting Load Kernel Module drm...
[  330.212233] systemd[1]: Starting Load Kernel Module fuse...
         Starting Load Kernel Module fuse...
[  330.244976] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[  330.254828] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[  330.280303] systemd[1]: Starting Journal Service...
         Starting Journal Service...
[  330.326023] systemd[1]: Starting Load Kernel Modules...
         Starting Load Kernel Modules...
[  330.380672] systemd[1]: Starting Remount Root and Kernel File Systems...
         Starting Remount Root and Kernel File Systems...
[  330.464263] systemd[1]: Starting Coldplug All udev Devices...
         Starting Coldplug All udev Devices...
[  330.588936] systemd[1]: Mounted POSIX Message Queue File System.
[  OK  ] Mounted POSIX Message Queue File System.
[  330.641316] systemd[1]: Mounted /sys/kernel/debug.
[  OK  ] Mounted /sys/kernel/debug.
[  330.676922] systemd[1]: Mounted Kernel Trace File System.
[  OK  ] Mounted Kernel Trace File System.
[  330.727271] systemd[1]: Finished Create list of static device nodes for the current kernel.
[  OK  ] Finished Create list of st… nodes[  330.766596] EXT4-fs (mmcblk0p1): re-mounted. Opts: errors=remount-ro
 for the current kernel.
[  330.795612] systemd[1]: [email protected]: Succeeded.
[  330.827724] systemd[1]: Finished Load Kernel Module configfs.
[  OK  ] Finished Load Kernel Module configfs.
[  330.889153] systemd[1]: [email protected]: Succeeded.
[  330.913963] systemd[1]: Finished Load Kernel Module drm.
[  OK  ] Finished Load Kernel Module drm.
[  330.954484] systemd[1]: [email protected]: Succeeded.
[  330.987626] systemd[1]: Finished Load Kernel Module fuse.
[  OK  ] Finished Load Kernel Module fuse.
[  331.031668] systemd[1]: Finished Load Kernel Modules.
[  OK  ] Finished Load Kernel Modules.
[  331.072149] systemd[1]: Finished Remount Root and Kernel File Systems.
[  OK  ] Finished Remount Root and Kernel File Systems.
[  331.131967] systemd[1]: Mounting FUSE Control File System...
         Mounting FUSE Control File System...
[  331.235741] systemd[1]: Mounting Kernel Configuration File System...
         Mounting Kernel Configuration File System...
[  331.308765] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[  331.356098] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
[  331.406199] systemd[1]: Starting Load/Save Random Seed...
         Starting Load/Save Random Seed...
[  331.468527] systemd[1]: Starting Apply Kernel Variables...
         Starting Apply Kernel Variables...
[  331.540608] systemd[1]: Starting Create System Users...
         Starting Create System Users...
[  331.642554] systemd[1]: Mounted FUSE Control File System.
[  OK  ] Mounted FUSE Control File System.
[  331.721321] systemd[1]: Mounted Kernel Configuration File System.
[  OK  ] Mounted Kernel Configuration File System.
[  331.776037] systemd[1]: Finished Load/Save Random Seed.
[  OK  ] Finished Load/Save Random Seed.
[  331.828641] systemd[1]: Finished Apply Kernel Variables.
[  OK  ] Finished Apply Kernel Variables.
[  331.869180] systemd[1]: Condition check resulted in First Boot Complete being skipped.
[  331.955859] systemd[1]: Finished Create System Users.
[  OK  ] Finished Create System Users.
[  332.012811] systemd[1]: Starting Create Static Device Nodes in /dev...
         Starting Create Static Device Nodes in /dev...
[  332.083432] systemd[1]: Started Journal Service.
[  OK  ] Started Journal Service.
         Starting Flush Journal to Persistent Storage...
[  332.376596] systemd-journald[3107]: Received client request to flush runtime journal.
[  OK  ] Finished Create Static Device Nodes[  332.403732] systemd-journald[3107]: File /var/log/journal/adae2febbc504075937aeb5fd143dbaf/system.journal corrupted or uncleanly shut down, renaming and replacing.
 in /dev.
[  OK  ] Reached target Local File Systems (Pre).
[  OK  ] Reached target Local File Systems.
         Starting Rule-based Manage…for Device Events and Files...
[  OK  ] Finished Flush Journal to Persistent Storage.
         Starting Create Volatile Files and Directories...
[  OK  ] Finished Coldplug All udev Devices.
[  OK  ] Started Rule-based Manager for Device Events and Files.
         Starting Helper to synchronize boot up for ifupdown...
         Starting Network Service...
[  OK  ] Finished Helper to synchronize boot up for ifupdown.
         Starting Raise network interfaces...
[  OK  ] Finished Create Volatile Files and Directories.
         Starting Network Time Synchronization...
         Starting Update UTMP about System Boot/Shutdown...
[  OK  ] Finished Update UTMP about System Boot/Shutdown.
[  OK  ] Finished Raise network interfaces.
[  OK  ] Started Network Service.
[  335.204193] cpsw 4a100000.ethernet: initializing cpsw version 1.12 (0)
         Starting Network Name Resolution...
[  335.316887] SMSC LAN8710/LAN8720 4a101000.mdio:00: attached PHY driver [SMSC LAN8710/LAN8720] (mii_bus:phy_addr=4a101000.mdio:00, irq=POLL)
[  OK  ] Started Network Time Synchronization.
[  OK  ] Reached target System Initialization.
[  OK  ] Started Daily Cleanup of Temporary Directories.
[  OK  ] Reached target System Time Set.
[  OK  ] Reached target System Time Synchronized.
[  OK  ] Started Periodic ext4 Onli…ata Check for All Filesystems.
[  OK  ] Started Discard unused blocks once a week.
[  OK  ] Started Daily rotation of log files.
[  OK  ] Reached target Timers.
[  OK  ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
[  OK  ] Listening on D-Bus System Message Bus Socket.
[  OK  ] Listening on gunicorn socket.
[  OK  ] Reached target Sockets.
[  OK  ] Reached target Basic System.
         Starting Avahi mDNS/DNS-SD Stack...
         Starting BeagleBoard Generate Symlinks...
         Starting BeagleBoard.org USB gadgets...
[  OK  ] Started Regular background program processing daemon.
[  OK  ] Started D-Bus System Message Bus.
         Starting Remove Stale Onli…t4 Metadata Check Snapshots...
[  OK  ] Started Setup for BBB pins.
         Starting System Logging Service...
         Starting User Login Management...
         Starting WPA supplicant...
[  OK  ] Started System Logging Service.
[  OK  ] Finished Remove Stale Onli…ext4 Metadata Check Snapshots.
[  338.025610] using random self ethernet address
[  OK  ] Started Avahi mDNS/DNS-SD Stack.
[  338.092216] using random host ethernet address
[  OK  ] Started WPA supplicant.
[  338.376051] using random self ethernet address
[  OK  ] Started Network Name Resolution.
[  338.406508] using random host ethernet address
[  OK  ] Reached target Network.
[  OK  ] Reached target Network is Online.
[  OK  ] Reached target Host and Network Name Lookups.
         Starting gunicorn daemon...
[  OK  ] Started Modbus TCP to Modbus RTU (RS-232/485) gateway..
[  338.633661] Mass Storage Function, version: 2009/09/11
[  338.699126] LUN: removable file: (no medium)
         Starting A high performanc… and a reverse proxy server...
         Starting Permit User Sessions...
[  338.931611] usb0: HOST MAC 30:e2:83:de:1a:6d
[  338.973058] usb0: MAC 30:e2:83:de:1a:6e
[  339.017975] usb1: HOST MAC 30:e2:83:de:1a:6f
[  339.065085] usb1: MAC 30:e2:83:de:1a:70
[  OK  ] Started BeagleBoard.org USB gadgets.
[  OK  ] Started User Login Management.
[  OK  ] Finished Permit User Sessions.
[  OK  ] Started Getty on tty1.
[  OK  ] Finished BeagleBoard Generate Symlinks.
         Starting OpenBSD Secure Shell server...
[  OK  ] Started A high performance…er and a reverse proxy server.
[  OK  ] Started OpenBSD Secure Shell server.
[*     ] (1 of 3) A start job is running for gunicorn daemon (14s / 1min 39s)
M[  OK  ] Started gunicorn daemon.
[  OK  ] Found device /dev/ttyS0.
[  OK  ] Started Serial Getty on ttyS0.

Debian GNU/Linux 11 BeagleBone ttyS0

BeagleBoard.org Debian Bullseye Minimal Image 2023-07-01
Support: https://bbb.io/debian
default username:password is [debian:temppwd]

BeagleBone login: [  346.702738] remoteproc remoteproc0: powering up wkup_m3
[  346.722373] remoteproc remoteproc0: Booting fw image am335x-pm-firmware.elf, size 217148
[  346.763415] remoteproc remoteproc0: remote processor wkup_m3 is now up
[  346.763437] wkup_m3_ipc 44e11324.wkup_m3_ipc: CM3 Firmware Version = 0x192
[  353.683311] CAN device driver interface
[  353.896134] c_can_platform 481cc000.can: c_can_platform device registered (regs=206d6602, irq=46)
[  354.047563] c_can_platform 481d0000.can: c_can_platform device registered (regs=6148f75d, irq=47)
[  359.622217] PM: bootloader does not support rtc-only!
[  363.327576] remoteproc remoteproc1: 4a334000.pru is available
[  363.659733] remoteproc remoteproc2: 4a338000.pru is available