freecad logs native start

Msg: FreeCAD 0.21, Libs: 0.21RUnknown
© Juergen Riegel, Werner Mayer, Yorik van Havre and others 2001-2022
FreeCAD is free and open-source software licensed under the terms of LGPL2+ license.
FreeCAD wouldn't be possible without FreeCAD community.
  #####                 ####  ###   ####
  #                    #      # #   #   #
  #     ##  #### ####  #     #   #  #   #
  ####  # # #  # #  #  #     #####  #   #
  #     #   #### ####  #    #     # #   #
  #     #   #    #     #    #     # #   #  ##  ##  ##
  #     #   #### ####   ### #     # ####   ##  ##  ##

Log: Time = 2022-Oct-18 14:55:38
Log: AboutImage = freecadabout
Log: AppDataSkipVendor = true
Log: AppHomePath = /usr/lib64/freecad/
Log: AppIcon = freecad
Log: AppTempPath = /tmp/
Log: BOOST_VERSION = 1_79
Log: BinPath = /usr/lib64/freecad/bin/
Log: BuildRepositoryURL = Unknown
Log: BuildRevision = Unknown
Log: BuildRevisionDate = Unknown
Log: BuildVersionMajor = 0
Log: BuildVersionMinor = 21
Log: CSF_GraphicShr = /usr/lib64/opencascade/libTKOpenGl.so
Log: CSF_IGESDefaults = /usr/share/opencascade/resources/XSTEPResource
Log: CSF_MDTVTexturesDirectory = /usr/share/opencascade/resources/Textures
Log: CSF_PluginDefaults = /usr/share/opencascade/resources/StdResource
Log: CSF_SHMessage = /usr/share/opencascade/resources/SHMessage
Log: CSF_STEPDefaults = /usr/share/opencascade/resources/XSTEPResource
Log: CSF_StandardDefaults = /usr/share/opencascade/resources/StdResource
Log: CSF_UnitsDefinition = /usr/share/opencascade/resources/UnitsAPI/Units.dat
Log: CSF_XCAFDefaults = /usr/share/opencascade/resources/StdResource
Log: Console = 0
Log: CopyrightInfo = © Juergen Riegel, Werner Mayer, Yorik van Havre and others 2001-2022
FreeCAD is free and open-source software licensed under the terms of LGPL2+ license.
FreeCAD wouldn't be possible without FreeCAD community.
  #####                 ####  ###   ####
  #                    #      # #   #   #
  #     ##  #### ####  #     #   #  #   #
  ####  # # #  # #  #  #     #####  #   #
  #     #   #### ####  #    #     # #   #
  #     #   #    #     #    #     # #   #  ##  ##  ##
  #     #   #### ####   ### #     # ####   ##  ##  ##


Log: Debug = 0
Log: DocPath = /usr/lib64/freecad/doc/
Log: EIGEN_VERSION = 3.4.0
Log: ExeName = FreeCAD
Log: ExeVendor = FreeCAD
Log: ExeVersion = 0.21
Log: LoggingConsole = 1
Log: LoggingFile = 1
Log: LoggingFileName = freecad_no-strace.log
Log: MaintainerUrl = http://www.freecad.org/wiki/Main_Page
Log: OCC_VERSION = 7.6.3
Log: PATH = /usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/opt/bin:/usr/lib/llvm/14/bin:/usr/lib64/opencascade/bin
Log: PYSIDE_VERSION = 5.15.5
Log: PYTHONPATH =
Log: PYTHON_VERSION = 3.10.8
Log: PythonSearchPath = /usr/bin/../lib/python310.zip:/usr/bin/../lib/python3.10:/usr/bin/../lib/python3.10/lib-dynload
Log: QT_VERSION = 5.15.5
Log: RunMode = Gui
Log: SplashAlignment = Bottom|Left
Log: SplashInfoColor = #c8c8c8
Log: SplashInfoPosition = 15.210
Log: SplashScreen = freecadsplash
Log: SplashTextColor = #ffffff
Log: StartWorkbench = StartWorkbench
Log: SystemParameter = /home/kosmik2001/.config/FreeCAD/system.cfg
Log: UserAppData = /home/kosmik2001/.local/share/FreeCAD/
Log: UserCachePath = /home/kosmik2001/.cache/FreeCAD/Cache/
Log: UserConfigPath = /home/kosmik2001/.config/FreeCAD/
Log: UserHomePath = /home/kosmik2001
Log: UserMacroPath = /home/kosmik2001/.local/share/FreeCAD/Macro/
Log: UserParameter = /home/kosmik2001/.config/FreeCAD/user.cfg
Log: Verbose =
Log: XERCESC_VERSION = 3.2.3
Log: Create Application
Log: Run App init script
Log: Init: starting App::FreeCADInit.py
Log: Init:   Searching for modules...
Log: Init:      Initializing /usr/lib64/freecad/Mod/Start... done
Log: Init:      Initializing /usr/lib64/freecad/Mod/Draft... done
Log: Init:      Initializing /usr/lib64/freecad/Mod/Surface... done
Log: Init:      Initializing /usr/lib64/freecad/Mod/Material... done
Log: Init:      Initializing /usr/lib64/freecad/Mod/Show(Init.py not found)... ignore
Log: Init:      Initializing /usr/lib64/freecad/Mod/Mesh... done
Log: Init:      Initializing /usr/lib64/freecad/Mod/Points... done
Log: Init:      Initializing /usr/lib64/freecad/Mod/Robot... done
Log: Init:      Initializing /usr/lib64/freecad/Mod/Path... done
Log: Init:      Initializing /usr/lib64/freecad/Mod/AddonManager... done
Log: Init:      Initializing /usr/lib64/freecad/Mod/Spreadsheet... done
Log: Init:      Initializing /usr/lib64/freecad/Mod/Import... done
Log: Init:      Initializing /usr/lib64/freecad/Mod/Test... done
Log: Init:      Initializing /usr/lib64/freecad/Mod/MeshPart... done
Log: Init:      Initializing /usr/lib64/freecad/Mod/Image... done
Log: Init:      Initializing /usr/lib64/freecad/Mod/Measure... done
Log: Init:      Initializing /usr/lib64/freecad/Mod/Raytracing... done
Log: Init:      Initializing /usr/lib64/freecad/Mod/Part... done
Log: Init:      Initializing /usr/lib64/freecad/Mod/Plot(Init.py not found)... ignore
Log: Init:      Initializing /usr/lib64/freecad/Mod/Tux(Init.py not found)... ignore
Log: Init:      Initializing /usr/lib64/freecad/Mod/Idf... done
Log: Init:      Initializing /usr/lib64/freecad/Mod/Sketcher... done
Log: Drawing became obsolete in 0.17; consider using TechDraw instead.
Log: Init:      Initializing /usr/lib64/freecad/Mod/Drawing... done
Log: Init:      Initializing /usr/lib64/freecad/Mod/OpenSCAD... done
Log: Init:      Initializing /usr/lib64/freecad/Mod/Web... done
Log: Init:      Initializing /usr/lib64/freecad/Mod/TechDraw... done
Log: Init:      Initializing /usr/lib64/freecad/Mod/Inspection... done
Log: Init:      Initializing /usr/lib64/freecad/Mod/Arch... done
Log: Init:      Initializing /usr/lib64/freecad/Mod/PartDesign... done
Log: Init:      Initializing /usr/lib64/freecad/Mod/Fem... done
Log: Using /usr/lib64/freecad/Mod as module path!
Log: System path after init:
Log:    /usr/lib64/freecad/bin
Log:    /usr/lib64/freecad/Mod/Start
Log:    /usr/lib64/freecad/Mod/Draft
Log:    /usr/lib64/freecad/Mod/Surface
Log:    /usr/lib64/freecad/Mod/Material
Log:    /usr/lib64/freecad/Mod/Show
Log:    /usr/lib64/freecad/Mod/Mesh
Log:    /usr/lib64/freecad/Mod/Points
Log:    /usr/lib64/freecad/Mod/Robot
Log:    /usr/lib64/freecad/Mod/Path
Log:    /usr/lib64/freecad/Mod/AddonManager
Log:    /usr/lib64/freecad/Mod/Spreadsheet
Log:    /usr/lib64/freecad/Mod/Import
Log:    /usr/lib64/freecad/Mod/Test
Log:    /usr/lib64/freecad/Mod/MeshPart
Log:    /usr/lib64/freecad/Mod/Image
Log:    /usr/lib64/freecad/Mod/Measure
Log:    /usr/lib64/freecad/Mod/Raytracing
Log:    /usr/lib64/freecad/Mod/Part
Log:    /usr/lib64/freecad/Mod/Plot
Log:    /usr/lib64/freecad/Mod/Tux
Log:    /usr/lib64/freecad/Mod/Idf
Log:    /usr/lib64/freecad/Mod/Sketcher
Log:    /usr/lib64/freecad/Mod/Drawing
Log:    /usr/lib64/freecad/Mod/OpenSCAD
Log:    /usr/lib64/freecad/Mod/Web
Log:    /usr/lib64/freecad/Mod/TechDraw
Log:    /usr/lib64/freecad/Mod/Inspection
Log:    /usr/lib64/freecad/Mod/Arch
Log:    /usr/lib64/freecad/Mod/PartDesign
Log:    /usr/lib64/freecad/Mod/Fem
Log:    /usr/local/sbin
Log:    /usr/local/bin
Log:    /usr/sbin
Log:    /usr/bin
Log:    /sbin
Log:    /bin
Log:    /opt/bin
Log:    /usr/lib/llvm/14/bin
Log:    /usr/lib64/opencascade/bin
Log: Init: App::FreeCADInit.py done
Log: Init: Creating Gui::Application and QApplication
Err: Program received signal SIGSEGV, Segmentation fault.
Err: #0  /lib64/libc.so.6(+0x3d4b0) [0x7f071faab4b0]