ubuntu 16.04 xenial netinst

=> setenv bootargs root=/dev/sdc1  mem=3500M console=ttyS0,115200 console=tty0 boot=casper
=> run bootmlnr
WARNING: adjusting available memory to 30000000
## Booting kernel from Legacy Image at 01000000 ...
   Image Name:   Linux-4.4.0-rc1
   Created:      2015-11-16  18:48:43 UTC
   Image Type:   PowerPC Linux Kernel Image (gzip compressed)
   Data Size:    8609575 Bytes = 8.2 MiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
## Loading init Ramdisk from Legacy Image at 02100000 ...
   Image Name:   ubu16.04-ppc64-initrd
   Created:      2015-11-18   3:41:56 UTC
   Image Type:   PowerPC Linux RAMDisk Image (lzma compressed)
   Data Size:    23937267 Bytes = 22.8 MiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 02000000
   Booting using the fdt blob at 0x2000000
   Uncompressing Kernel Image ... OK
   Loading Ramdisk to 2e92b000, end 2ffff0f3 ... OK
   Loading Device Tree to 03fe5000, end 03fff577 ... OK
pci 0001:02:02.0: PCI bridge to [bus 05-ff]
pci 0001:02:03.0: PCI bridge to [bus 06-ff]
pci 0001:07:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
pci 0001:02:08.0: PCI bridge to [bus 07-ff]
pci 0001:07:00.0: PCI bridge to [bus 08-ff]
pci 0001:02:10.0: PCI bridge to [bus 09-ff]
PCI: Cannot allocate resource region 0 of device 0000:00:00.0, will remap
PCI: Cannot allocate resource region 0 of device 0001:00:00.0, will remap
pci 0000:00:00.0: BAR 0: no space for [mem size 0x01000000]
pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x01000000]
pci 0000:01:00.0: BAR 6: assigned [mem 0xc10040000-0xc1005ffff pref]
pci 0000:00:00.0: PCI bridge to [bus 01]
pci 0000:00:00.0:   bridge window [io  0x10000-0x1ffff]
pci 0000:00:00.0:   bridge window [mem 0xc00000000-0xc1fffffff]
pci_bus 0000:00: Some PCI device resources are unassigned, try booting with pci=realloc
pci 0001:00:00.0: BAR 0: no space for [mem size 0x01000000]
pci 0001:00:00.0: BAR 0: failed to assign [mem size 0x01000000]
pci 0001:03:00.0: PCI bridge to [bus 04]
pci 0001:03:00.0:   bridge window [io  0x22000-0x22fff]
pci 0001:03:00.0:   bridge window [mem 0xc20000000-0xc200fffff]
pci 0001:02:01.0: PCI bridge to [bus 03-04]
pci 0001:02:01.0:   bridge window [io  0x22000-0x22fff]
pci 0001:02:01.0:   bridge window [mem 0xc20000000-0xc200fffff]
pci 0001:02:02.0: PCI bridge to [bus 05]
pci 0001:02:02.0:   bridge window [io  0x23000-0x23fff]
pci 0001:02:02.0:   bridge window [mem 0xc20100000-0xc201fffff]
pci 0001:02:03.0: PCI bridge to [bus 06]
pci 0001:02:03.0:   bridge window [mem 0xc20200000-0xc202fffff]
pci 0001:07:00.0: PCI bridge to [bus 08]
pci 0001:07:00.0:   bridge window [io  0x24000-0x24fff]
pci 0001:07:00.0:   bridge window [mem 0xc20400000-0xc204fffff]
pci 0001:02:08.0: PCI bridge to [bus 07-08]
pci 0001:02:08.0:   bridge window [io  0x24000-0x24fff]
pci 0001:02:08.0:   bridge window [mem 0xc20300000-0xc204fffff]
pci 0001:02:10.0: PCI bridge to [bus 09]
pci 0001:01:00.0: PCI bridge to [bus 02-09]
pci 0001:01:00.0:   bridge window [io  0x22000-0x24fff]
pci 0001:01:00.0:   bridge window [mem 0xc20000000-0xc204fffff]
pci 0001:00:00.0: PCI bridge to [bus 01-09]
pci 0001:00:00.0:   bridge window [io  0x21000-0x30fff]
pci 0001:00:00.0:   bridge window [mem 0xc20000000-0xc3fffffff]
pci_bus 0001:00: Some PCI device resources are unassigned, try booting with pci=realloc
Setting up RapidIO peer-to-peer network /rapidio@ffe0c0000
fsl-of-rio ffe0c0000.rapidio: Of-device full name /rapidio@ffe0c0000
fsl-of-rio ffe0c0000.rapidio: Regs: [mem 0xffe0c0000-0xffe0d0fff]
fsl-of-rio ffe0c0000.rapidio: No valid fsl,srio-rmu-handle property
raid6: int64x1  gen()   750 MB/s
raid6: int64x1  xor()   820 MB/s
raid6: int64x2  gen()  1222 MB/s
raid6: int64x2  xor()  1063 MB/s
raid6: int64x4  gen()  1675 MB/s
raid6: int64x4  xor()  1173 MB/s
raid6: int64x8  gen()  1429 MB/s
raid6: int64x8  xor()   946 MB/s
raid6: using algorithm int64x4 gen() 1675 MB/s
raid6: .... xor() 1173 MB/s, rmw enabled
raid6: using intx1 recovery algorithm
Freescale Elo series DMA driver
fsl-elo-dma ffe100300.dma: #0 (fsl,eloplus-dma-channel), irq 28
fsl-elo-dma ffe100300.dma: #1 (fsl,eloplus-dma-channel), irq 29
fsl-elo-dma ffe100300.dma: #2 (fsl,eloplus-dma-channel), irq 30
fsl-elo-dma ffe100300.dma: #3 (fsl,eloplus-dma-channel), irq 31
fsl-elo-dma ffe101300.dma: #0 (fsl,eloplus-dma-channel), irq 32
fsl-elo-dma ffe101300.dma: #1 (fsl,eloplus-dma-channel), irq 33
fsl-elo-dma ffe101300.dma: #2 (fsl,eloplus-dma-channel), irq 34
fsl-elo-dma ffe101300.dma: #3 (fsl,eloplus-dma-channel), irq 35
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
PTP clock support registered
EDAC MC: Ver: 3.0.0
Advanced Linux Sound Architecture Driver Initialized.
clocksource: Switched to clocksource timebase
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 23376K (c00000002e92b000 - c00000002ffff000)
futex hash table entries: 512 (order: 3, 32768 bytes)
HugeTLB registered 4 MB page size, pre-allocated 0 pages
HugeTLB registered 16 MB page size, pre-allocated 0 pages
HugeTLB registered 64 MB page size, pre-allocated 0 pages
HugeTLB registered 256 MB page size, pre-allocated 0 pages
HugeTLB registered 1 GB page size, pre-allocated 0 pages
squashfs: version 4.0 (2009/01/31) Phillip Lougher
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
ntfs: driver 2.1.32 [Flags: R/O].
jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
fuse init (API version 7.23)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
console [ttyS0] disabled
serial8250.0: ttyS0 at MMIO 0xffe11c500 (irq = 36, base_baud = 24937500) is a 16550A
console [ttyS0] enabled
serial8250.0: ttyS1 at MMIO 0xffe11c600 (irq = 36, base_baud = 24937500) is a 16550A
serial8250.0: ttyS2 at MMIO 0xffe11d500 (irq = 37, base_baud = 24937500) is a 16550A
serial8250.0: ttyS3 at MMIO 0xffe11d600 (irq = 37, base_baud = 24937500) is a 16550A
ePAPR hypervisor byte channel driver
[drm] Initialized drm 1.1.0 20060810
[drm] radeon kernel modesetting enabled.
[drm] initializing kernel modesetting (CAICOS 0x1002:0x6779 0x1462:0x8A9D).
[drm] register mmio base: 0x10000000
[drm] register mmio size: 131072
ATOM BIOS: 113
[drm] GPU not posted. posting now...
radeon 0000:01:00.0: VRAM: 2048M 0x0000000000000000 - 0x000000007FFFFFFF (2048M used)
radeon 0000:01:00.0: GTT: 1024M 0x0000000080000000 - 0x00000000BFFFFFFF
[drm] Detected VRAM RAM=2048M, BAR=256M
[drm] RAM width 64bits DDR
[TTM] Zone  kernel: Available graphics memory: 1753568 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 2048M of VRAM memory ready
[drm] radeon: 1024M of GTT memory ready.
[drm] Loading CAICOS Microcode
[drm] Internal thermal controller with fan control
[drm] radeon: dpm initialized
[drm] GART: num cpu pages 262144, num gpu pages 262144
[drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[drm] PCIE GART of 1024M enabled (table at 0x0000000000274000).
radeon 0000:01:00.0: WB enabled
radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0xc00000002e0fac00
radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0xc00000002e0fac0c
radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0x8000080080132118
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:01:00.0: radeon: MSI limited to 32-bit
radeon 0000:01:00.0: radeon: using MSI.
[drm] radeon: irq initialized.
[drm] ring test on 0 succeeded in 2 usecs
[drm] ring test on 3 succeeded in 7 usecs
[drm] ring test on 5 succeeded in 2 usecs
[drm] UVD initialized successfully.
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] ib test on ring 5 succeeded
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm]   HDMI-A-1
[drm]   HPD1
[drm]   DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
[drm]   Encoders:
[drm]     DFP1: INTERNAL_UNIPHY1
[drm] Connector 1:
[drm]   DVI-D-1
[drm]   HPD4
[drm]   DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[drm]   Encoders:
[drm]     DFP2: INTERNAL_UNIPHY
[drm] Connector 2:
[drm]   VGA-1
[drm]   DDC: 0x64d8 0x64d8 0x64dc 0x64dc 0x64e0 0x64e0 0x64e4 0x64e4
[drm]   Encoders:
[drm]     CRT1: INTERNAL_KLDSCP_DAC1
[drm] fb mappable at 0xC00475000
[drm] vram apper at 0xC00000000
[drm] size 8294400
[drm] fb depth is 24
[drm]    pitch is 7680
Console: switching to colour frame buffer device 240x67
radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[drm] Initialized radeon 2.43.0 20080528 for 0000:01:00.0 on minor 0
brd: module loaded
loop: module loaded
Loading iSCSI transport class v2.0-870.
iscsi: registered transport (tcp)
scsi host0: Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 3.0
        <Adaptec 29320LPE PCIe Ultra320 SCSI adapter>
        aic7901: Ultra320 Wide Channel A, SCSI Id=7, PCI-X 101-133MHz, 512 SCBs
ahci 0001:05:00.0: SSS flag set, parallel bus scan disabled
ahci 0001:05:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0001:05:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs
scsi host1: ahci
scsi host2: ahci
ata1: SATA max UDMA/133 abar m512@0xc20100000 port 0xc20100100 irq 43
ata2: SATA max UDMA/133 abar m512@0xc20100000 port 0xc20100180 irq 43
fsl-sata ffe220000.sata: Sata FSL Platform/CSB Driver init
scsi host3: sata_fsl
ata3: SATA max UDMA/133 irq 68
fsl-sata ffe221000.sata: Sata FSL Platform/CSB Driver init
scsi host4: sata_fsl
ata4: SATA max UDMA/133 irq 69
fsl_espi ffe110000.spi: at 0x8000080080066000 (irq = 53)
libphy: Fixed MDIO Bus: probed
libphy: Freescale PowerQUICC MII Bus: probed
libphy: Freescale XGMAC MDIO Bus: probed
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0001:04:04.0 (unnamed net_device) (uninitialized): not PCI Express
r8169 0001:04:04.0 eth0: RTL8110s at 0x800008008006c000, 00:08:54:3f:99:a4, XID 04000000 IRQ 18
r8169 0001:04:04.0 eth0: jumbo features [frames: 7152 bytes, tx checksumming: ok]
usbcore: registered new interface driver lan78xx
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ehci-fsl: Freescale EHCI Host controller driver
fsl-ehci fsl-ehci.0: Freescale On-Chip EHCI Host Controller
fsl-ehci fsl-ehci.0: new USB bus registered, assigned bus number 1
fsl-ehci fsl-ehci.0: irq 44, io mem 0xffe210000
fsl-ehci fsl-ehci.0: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
fsl-ehci fsl-ehci.1: Freescale On-Chip EHCI Host Controller
fsl-ehci fsl-ehci.1: new USB bus registered, assigned bus number 2
fsl-ehci fsl-ehci.1: irq 45, io mem 0xffe211000
fsl-ehci fsl-ehci.1: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
usbcore: registered new interface driver usb-storage
i2c /dev entries driver
mpc-i2c ffe118100.i2c: timeout 1000000 us
mpc-i2c ffe119100.i2c: timeout 1000000 us
rtc-ds1307 9-006f: rtc core: registered mcp7941x as rtc0
rtc-ds1307 9-006f: 64 bytes nvram
mpc-i2c ffe118000.i2c: timeout 1000000 us
mpc-i2c ffe119000.i2c: timeout 1000000 us
device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: [email protected]
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
/soc@ffe000000/sdhc@114000: voltage-ranges unspecified
sdhci-esdhc ffe114000.sdhc: No vmmc regulator found
sdhci-esdhc ffe114000.sdhc: No vqmmc regulator found
mmc0: SDHCI controller on ffe114000.sdhc [ffe114000.sdhc] using ADMA
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
Freescale hypervisor management driver
fsl-hv: no hypervisor found
snd_hda_intel 0000:01:00.1: Force to snoop mode by module option
ipip: IPv4 over IPv4 tunneling driver
mmc0: new high speed SDHC card at address 1234
mmcblk0: mmc0:1234 SA04G 3.67 GiB
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: supports DRM functions and may not be fully accessible
ata1.00: ATA-9: Crucial_CT512M550SSD3, MU01, max UDMA/133
Initializing XFRM netlink socket
NET: Registered protocol family 10
usb 1-1: new high-speed USB device number 2 using fsl-ehci
snd_hda_codec_hdmi hdaudioC0D0: HDMI ATI/AMD: no speaker allocation for ELD
ata4: No Device OR PHYRDY change,Hstatus = 0xa0000000
ata4: SATA link down (SStatus 0 SControl 300)
ata3: Signature Update detected @ 516 msecs
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/platform/ffe200000.pcie/pci0000:00/0000:00:00.0/0000:01:00.1/sound/card0/input0
sit: IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
NET: Registered protocol family 15
Key type dns_resolver registered
Btrfs loaded
rtc-ds1307 9-006f: setting system clock to 2015-11-18 03:45:23 UTC (1447818323)
ALSA device list:
  #0: HDA ATI HDMI at 0xc10020000 irq 46
usb 2-1: new high-speed USB device number 2 using fsl-ehci
ata1.00: 1000215216 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: supports DRM functions and may not be fully accessible
hub 1-1:1.0: USB hub found
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
hub 1-1:1.0: 4 ports detected
ata1.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access     ATA      Crucial_CT512M55 MU01 PQ: 0 ANSI: 5
ata1.00: Enabling discard_zeroes_data
sd 1:0:0:0: [sda] 1000215216 512-byte logical blocks: (512 GB/476 GiB)
sd 1:0:0:0: [sda] 4096-byte physical blocks
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata3.00: ATA-8: ST9320423AS, 0002SDM1, max UDMA/133
ata3.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 16/32)
sd 1:0:0:0: Attached scsi generic sg0 type 0
ata1.00: Enabling discard_zeroes_data
ata3.00: configured for UDMA/133
 sda: sda1
ata1.00: Enabling discard_zeroes_data
sd 1:0:0:0: [sda] Attached SCSI removable disk
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 4 ports detected
ata2: SATA link down (SStatus 0 SControl 300)
scsi 3:0:0:0: Direct-Access     ATA      ST9320423AS      SDM1 PQ: 0 ANSI: 5
sd 3:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 3:0:0:0: Attached scsi generic sg1 type 0
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdb: sdb1 sdb2 sdb3 sdb4
sd 3:0:0:0: [sdb] Attached SCSI disk
usb 1-1.1: new full-speed USB device number 3 using fsl-ehci
Freeing unused kernel memory: 372K (c00000000121d000 - c00000000127a000)
random: udevadm urandom read with 31 bits of entropy available
hub 1-1.1:1.0: USB hub found
hub 1-1.1:1.0: 3 ports detected
usb 1-1.4: new low-speed USB device number 4 using fsl-ehci
usb 2-1.1: new high-speed USB device number 3 using fsl-ehci
r8169 0001:04:04.0 enP1p4s4: renamed from eth0
input: Logitech USB Trackball as /devices/platform/ffe000000.soc/ffe210000.usb/fsl-ehci.0/usb1/1-1/1-1.4/1-1.4:1.0/0003:046D:C408.0001/input/input1
hid-generic 0003:046D:C408.0001: input: USB HID v1.10 Mouse [Logitech USB Trackball] on usb-fsl-ehci.0-1.4/input0
usb-storage 2-1.1:1.0: USB Mass Storage device detected
scsi host5: usb-storage 2-1.1:1.0
usb 1-1.1.2: new low-speed USB device number 5 using fsl-ehci
input: Razer Pro|Type Keyboard as /devices/platform/ffe000000.soc/ffe210000.usb/fsl-ehci.0/usb1/1-1/1-1.1/1-1.1.2/1-1.1.2:1.0/0003:1532:0105.0002/input/input2
hid-generic 0003:1532:0105.0002: input: USB HID v1.10 Keyboard [Razer Pro|Type Keyboard] on usb-fsl-ehci.0-1.1.2/input0
input: Razer Pro|Type Keyboard as /devices/platform/ffe000000.soc/ffe210000.usb/fsl-ehci.0/usb1/1-1/1-1.1/1-1.1.2/1-1.1.2:1.1/0003:1532:0105.0003/input/input3
hid-generic 0003:1532:0105.0003: input: USB HID v1.10 Device [Razer Pro|Type Keyboard] on usb-fsl-ehci.0-1.1.2/input1
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/nfs-top ... done.
Begin: Running /scripts/nfs-premount ... done.
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
scsi 5:0:0:0: Direct-Access     FLASH    Drive SM_USB30   1100 PQ: 0 ANSI: 6
sd 5:0:0:0: Attached scsi generic sg2 type 0
sd 5:0:0:0: [sdc] 15360000 512-byte logical blocks: (7.86 GB/7.32 GiB)
sd 5:0:0:0: [sdc] Write Protect is off
sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdc: sdc1
sd 5:0:0:0: [sdc] Attached SCSI removable disk
random: nonblocking pool is initialized
EXT4-fs (sdb1): mounting ext3 file system using the ext4 subsystem
EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sdb3): mounting ext3 file system using the ext4 subsystem
EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: (null)
Begin: Running /scripts/casper-premount ... done.
done.
EXT4-fs (sdb4): mounting ext3 file system using the ext4 subsystem
EXT4-fs (sdb4): get root inode failed
EXT4-fs (sdb4): mount failed
mount: mounting /dev/sdb4 on /cdrom failed: Stale file handle
EXT4-fs (sdb4): mounting ext3 file system using the ext4 subsystem
EXT4-fs (sdb4): get root inode failed
EXT4-fs (sdb4): mount failed
mount: mounting /dev/sdb4 on /cdrom failed: Stale file handle
done.
Begin: Creating debconf-communicate fifo mechanism ... done.
Begin: Running /scripts/casper-bottom ... Begin: Moving mount points... ... done.
Begin: Configuring fstab... ... done.
Begin: Setting up swap... ... done.
Begin: Setting up locales... ... Generating locales...
  en_US.UTF-8... done
Generation complete.
done.
Begin: Setting up automatic login... ... done.
Begin: Setting up automatic login... ... done.
Begin: Setting hostname... ... done.
Begin: Setting up console keyboard... ... done.
Begin: Applying desktop settings... ... done.
Begin: Regenerating SSL certificate... ... done.
Begin: Preconfiguring networking... ... done.
Begin: Loading preseed file... ... done.
Begin: Adding live session user... ... pwconv: failed to change the mode of /etc/passwd- to 0600
done.
Begin: Setting up init... ... done.
Begin: Configuring accessibility options... ... done.
Begin: Disabling update-notifier... ... done.
Begin: Configuring power management... ... done.
Begin: Enabling detection of crashes... ... done.
Begin: Disabling unnecessary KDE services... ... done.
Begin: Fixing language selector... ... done.
Begin: Disabling trackerd... ... done.
Begin: Adding APT-CDROM source... ... Using CD-ROM mount point /cdrom/
Identifying... [6e0dcc579eaacde2c568971c0493e15c-2]
Scanning disc for index files...
Found 4 package indexes, 0 source indexes, 0 translation indexes and 1 signatures
Found label 'Ubuntu-MATE 16.04 LTS _Xenial Xerus_ - Alpha powerpc (20151117)'
This disc is called:
'Ubuntu-MATE 16.04 LTS _Xenial Xerus_ - Alpha powerpc (20151117)'
Copying package lists...gpgv: Signature made Tue Nov 17 03:36:03 2015 UTC using DSA key ID FBB75451
gpgv: Good signature from "Ubuntu CD Image Automatic Signing Key <[email protected]>"
Reading Package Indexes... Done
Writing new source list
Source list entries for this disc are:
deb cdrom:[Ubuntu-MATE 16.04 LTS _Xenial Xerus_ - Alpha powerpc (20151117)]/ xenial main multiverse restricted universe
Repeat this process for the rest of the CDs in your set.
done.
Begin: Possibly disabling update-initramfs (useless on a live CD)... ... done.
Begin: Grant administrative PolicyKit privileges to default user... ... done.
Begin: Configuring jackd2... ... done.
Begin: Disabling unity8's first run wizard... ... done.
done.
done.
Begin: Running /scripts/nfs-bottom ... done.
Begin: Running /scripts/init-bottom ... done.
systemd[1]: Failed to insert module 'kdbus': Function not implemented
systemd[1]: systemd 227 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
systemd[1]: Detected architecture ppc64.

Welcome to Ubuntu 16.04!

systemd[1]: Set hostname to <ubuntu-mate>.
systemd[1]: Initializing machine ID from random generator.
systemd[1]: [/lib/systemd/system/casper.service:10] Failed to parse input specifier, ignoring: force-tty
-.mount
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[  OK  ystemd[1]: Created slice User and Session Slice.
0m] Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Listening on udev Kernel Socket.
cdrom.mount
systemd[1]: Listening on udev Control Socket.
[  OK  ystemd[1]: Listening on Device-mapper event daemon FIFOs.
0m] Created slice User and Session Slice.
[  OK  ] Listening on udesystemd[1]: Listening on Journal Socket (/dev/log).
v Kernel Socket.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
rofs.mount
systemd[1]: Listening on LVM2 poll daemon socket.
[  OK  ystemd[1]: Reached target Encrypted Volumes.
0m] Listening on udev Control Socket.
[  OK  ] Listening on Device-systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
mapper event daesystemd[1]: Reached target Remote File Systems (Pre).
mon FIFOs.
[  OK  ] Listening on Journal Socket (/dev/log).
[ystemd[1]: Reached target Remote File Systems.
32m  OK  ] Lsystemd[1]: Reached target User and Group Name Lookups.
istening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Listening on Journal Socket.
systemd[1]: Listening on LVM2 metadata daemon socket.
[  OK  ] Listening on LVM2 poll daemon socket.
[  OK  ] systemd[1]: Reached target Swap.
Reached target Encrypted Volumes.
[  OK  ] Set up automount Arbitrasystemd[1]: Created slice System Slice.
ry Executable File Formats File System Automount Point.
[  OK  ] Resystemd[1]: Created slice system-serial\x2dgetty.slice.
ached target Remote File Systems (Pre).
[  OK  ] Reached target Remote File Systems.
[  OK  ] Reached target User and Group Name Lookups.
[  OK  ] Listening on Journal Socket.
[  OK  ] Listening on LVM2 metadata daemon socket.
[  OK  ] Reached target Swap.
[  OK  ] Created slice System Slice.
[  OK  ] Created slice system-serial\x2dgetty.slice.
systemd[1]: Starting Remount Root and Kernel File Systems...
         Starting Remount Root and Kernel File Systems...
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Starting Increase datagram queue length...
systemd[1]: Reached target Slices.
         Mounting Huge Pages File System...
         Starting Increase datagram queue length...
[  OK  ] Reached target Slices.
systemd[1]: Mounting Debug File System...
         Mounting Debug File System...
systemd[1]: Starting Uncomplicated firewall...
systemd[1]: Starting Create Static Device Nodes in /dev...
         Starting Uncomplicated firewall...
systemd[1]: Started Read required files in advance.
         Starting Create Static Device Nodes in /dev...
[  OK  ] Started Read required files in advance.
systemd[1]: Created slice system-getty.slice.
ureadahead.service
systemd[1]: Starting Setup Virtual Console...
[  OK  ] Created slice system-getty.slice.
systemd[1]: Started Braille Device Support.
         Starting Setup Virtual Console...
systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
systemd[1]: Starting Load Kernel Modules...
[  OK  ] Started Braille Device Support.
         Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
         Starting Load Kernel Modules...
systemd[1]: Mounted Debug File System.
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Started Remount Root and Kernel File Systems.
[  OK  ] Mounted Debug File System.
[  OK  ] Mounted Huge Pages File System.
[  OK  ] Startsystemd[1]: Started Increase datagram queue length.
ed Remount Root and Kernel File Systems.
systemd[1]: Started Uncomplicated firewall.
systemd[1]: Started Create Static Device Nodes in /dev.
systemd[1]: ureadahead.service: Main process exited, code=exited, status=5/NOTINSTALLED
systemd[1]: ureadahead.service: Unit entered failed state.
systemd[1]: ureadahead.service: Failed with result 'exit-code'.
systemd[1]: Started Setup Virtual Console.
brltty.service
systemd[1]: systemd-modules-load.service: Main process exited, code=exited, status=1/FAILURE
systemd[1]: Failed to start Load Kernel Modules.
systemd[1]: systemd-modules-load.service: Unit entered failed state.
systemd[1]: systemd-modules-load.service: Failed with result 'exit-code'.
[  OK  ] Started Increase datagram queue length.
[  OK  ] Started Uncomplicated firewall.
[  OK  ] Started Create Static Device Nodes in /dev.
[  OK  ] Started Setup Virtual Console.
[FAILED] Failed to start Load Kernel Modules.
See 'systemctl status systemd-modules-load.service' for details.
sys-kernel-debug.mount
dev-hugepages.mount
systemd-remount-fs.service
systemd-setup-dgram-qlen.service
ufw.service
systemd-tmpfiles-setup-dev.service
systemd-vconsole-setup.service
systemd[1]: Started LVM2 metadata daemon.
[  OK  ] Started LVM2 metadata daemon.
systemd[1]: Starting Apply Kernel Variables...
lvm2-lvmetad.service
systemd[1]: Mounting FUSE Control File System...
         Starting Apply Kernel Variables...
         Mounting FUSE Control File System...
         Starting udev Kernel Device Manager...
[  OK  ] Listening on Syslog Socket.
         Starting Journal Service...
         Starting Load/Save Random Seed...
         Starting udev Coldplug all Devices...
[  OK  ] Mounted FUSE Control File System.
[  OK  ] Started Apply Kernel Variables.
[  OK  ] Started Load/Save Random Seed.
sys-fs-fuse-connections.mount
systemd-sysctl.service
systemd-random-seed.service
[  OK  ] Started Journal Service.
systemd-journald.service
         Starting Flush Journal to Persistent Storage...
[  OK  ] Started udev Kernel Device Manager.
[  OK  ] Reached target Local File Systems (Pre).
         Mounting /tmp...
[  OK  ] Mounted /tmp.
systemd-udevd.service
tmp.mount
[  OK  ] Started Flush Journal to Persistent Storage.
systemd-journal-flush.service
lvm2-monitor.service
[  OK  ] Started Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling.
[  OK  ] Reached target Local File Systems.
         Starting Set console keymap...
         Starting Clean up any mess left by 0dns-up...
         Starting Wait for all "auto" /etc/network/interfaces to be up for network-online.target...
         Starting Tell Plymouth To Write Out Runtime Data...
         Starting LSB: AppArmor initialization...
         Starting Create Volatile Files and Directories...
[  OK  ] Started udev Coldplug all Devices.
[  OK  ] Started Wait for all "auto" /etc/network/interfaces to be up for network-online.target.
[  OK  ] Started LSB: AppArmor initialization.
[  OK  ] Started Create Volatile Files and Directories.
[  OK  ] Started Clean up any mess left by 0dns-up.
systemd-udev-trigger.service
[  OK  ] Found device /dev/ttyS0.
ifup-wait-all-auto.service
apparmor.service
[  OK  ] Started Tell Plymouth To Write Out Runtime Data.
[  OK  ] Started Set console keymap.
systemd-tmpfiles-setup.service
[  OK  ] Reached target Sound Card.
         Starting Nameserver information manager...
[  OK  ] Reached target System Time Synchronized.
         Starting Update UTMP about System Boot/Shutdown...
[  OK  ] Started Nameserver information manager.
resolvconf.service
[  OK  ] Started Update UTMP about System Boot/Shutdown.
systemd-update-utmp.service
         Starting LSB: Raise network interfaces....
[  OK  ] Started LSB: Raise network interfaces..
[  OK  ] Reached target System Initialization.
networking.service
[  OK  ] Started CUPS Scheduler.
[  OK  ] Started Daily Cleanup of Temporary Directories.
[  OK  ] Reached target Timers.
[  OK  ] Listening on CUPS Scheduler.
[  OK  ] Listening on D-Bus System Message Bus Socket.
[  OK  ] Listening on UUID daemon activation socket.
[  OK  ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
[  OK  ] Reached target Sockets.
[  OK  ] Started Trigger resolvconf update for networkd DNS.
[  OK  ] Reached target Paths.
[  OK  ] Reached target Basic System.
         Starting Accounts Service...
[  OK  ] Started D-Bus System Message Bus.
dbus.service
         Starting Avahi mDNS/DNS-SD Stack...
         Starting Login Service...
         Starting LSB: automatic crash report generation...
[  OK  ] Started Run anacron jobs.
         Starting Restore /etc/resolv.conf if the system crashed before the ppp link was shut down....
[  OK  ] Started CUPS Scheduler.
         Starting LSB: Speech Dispatcher...
         Starting LSB: Set the CPU Frequency Scaling governor to "ondemand"...
[  OK  ] Started crash report submission daemon.
[  OK  ] Started Regular background program processing daemon.
         Starting Ubuntu live CD installer...
         Starting LSB: handle special hotkeys of Apple computers...
         Starting Permit User Sessions...
         Starting Modem Manager...
         Starting LSB: daemon to balance interrupts for SMP systems...
[  OK  ] Started Avahi DNS Configuration Daemon.
         Starting System Logging Service...
         Starting Network Manager...
[  OK  ] Started Restore /etc/resolv.conf if the system crashed before the ppp link was shut down..
[  OK  ] Started Permit User Sessions.
[  OK  ] Started LSB: handle special hotkeys of Apple computers.
[  OK  ] Started LSB: Speech Dispatcher.
[  OK  ] Started LSB: Set the CPU Frequency Scaling governor to "ondemand".
[  OK  ] Started Ubuntu live CD installer.
anacron.service
[  OK  ] Started LSB: daemon to balance interrupts for SMP systems.
[  OK  ] Started Avahi mDNS/DNS-SD Stack.
[  OK  ] Started Make remote CUPS printers available locally.
         Starting Light Display Manager...
[  OK  ] Started System Logging Service.
[  OK  ] Started Login Service.
cups.service
whoopsie.service
cron.service
avahi-dnsconfd.service
systemd-user-sessions.service
pbbuttonsd.service
speech-dispatcher.service
ondemand.service
irqbalance.service
avahi-daemon.service
cups-browsed.service
rsyslog.service
systemd-logind.service
         Starting Authenticate and Authorize Users to Run Privileged Tasks...
[  OK  ] Started LSB: automatic crash report generation.
apport.service
[  OK  ] Started Authenticate and Authorize Users to Run Privileged Tasks.
[  OK  ] Started Accounts Service.
polkitd.service
accounts-daemon.service
lightdm.service
ModemManager.service
NetworkManager.service
rc-local.service
ntp.service
kerneloops.service
wpa_supplicant.service
NetworkManager-dispatcher.service
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/nfs-top ... done.
Begin: Running /scripts/nfs-premount ... done.
Begin: Running /scripts/casper-premount ... done.
done.
mount: mounting /dev/sdb4 on /cdrom failed: Stale file handle
mount: mounting /dev/sdb4 on /cdrom failed: Stale file handle
done.
Begin: Creating debconf-communicate fifo mechanism ... done.
Begin: Running /scripts/casper-bottom ... Begin: Moving mount points... ... done.
Begin: Configuring fstab... ... done.
Begin: Setting up swap... ... done.
Begin: Setting up locales... ... Generating locales...
  en_US.UTF-8... done
Generation complete.
done.
Begin: Setting up automatic login... ... done.
Begin: Setting up automatic login... ... done.
Begin: Setting hostname... ... done.
Begin: Setting up console keyboard... ... done.
Begin: Applying desktop settings... ... done.
Begin: Regenerating SSL certificate... ... done.
Begin: Preconfiguring networking... ... done.
Begin: Loading preseed file... ... done.
Begin: Adding live session user... ... pwconv: failed to change the mode of /etc/passwd- to 0600
done.
Begin: Setting up init... ... done.
Begin: Configuring accessibility options... ... done.
Begin: Disabling update-notifier... ... done.
Begin: Configuring power management... ... done.
Begin: Enabling detection of crashes... ... done.
Begin: Disabling unnecessary KDE services... ... done.
Begin: Fixing language selector... ... done.
Begin: Disabling trackerd... ... done.
Begin: Adding APT-CDROM source... ... Using CD-ROM mount point /cdrom/
Identifying... [6e0dcc579eaacde2c568971c0493e15c-2]
Scanning disc for index files...
Found 4 package indexes, 0 source indexes, 0 translation indexes and 1 signatures
Found label 'Ubuntu-MATE 16.04 LTS _Xenial Xerus_ - Alpha powerpc (20151117)'
This disc is called:
'Ubuntu-MATE 16.04 LTS _Xenial Xerus_ - Alpha powerpc (20151117)'
Copying package lists...gpgv: Signature made Tue Nov 17 03:36:03 2015 UTC using DSA key ID FBB75451
gpgv: Good signature from "Ubuntu CD Image Automatic Signing Key <[email protected]>"
Reading Package Indexes... Done
Writing new source list
Source list entries for this disc are:
deb cdrom:[Ubuntu-MATE 16.04 LTS _Xenial Xerus_ - Alpha powerpc (20151117)]/ xenial main multiverse restricted universe
Repeat this process for the rest of the CDs in your set.
done.
Begin: Possibly disabling update-initramfs (useless on a live CD)... ... done.
Begin: Grant administrative PolicyKit privileges to default user... ... done.
Begin: Configuring jackd2... ... done.
Begin: Disabling unity8's first run wizard... ... done.
done.
done.
Begin: Running /scripts/nfs-bottom ... done.
Begin: Running /scripts/init-bottom ... done.

Welcome to Ubuntu 16.04!

[  OK  ] Started Forward Password Requests to Wall Directory Watch.
[  OK  ] Created slice User and Session Slice.
[  OK  ] Listening on udev Kernel Socket.
[  OK  ] Listening on udev Control Socket.
[  OK  ] Listening on Device-mapper event daemon FIFOs.
[  OK  ] Listening on Journal Socket (/dev/log).
[  OK  ] Listening on /dev/initctl Compatibility Named Pipe.
[  OK  ] Listening on LVM2 poll daemon socket.
[  OK  ] Reached target Encrypted Volumes.
[  OK  ] Set up automount Arbitrary Executable File Formats File System Automount Point.
[  OK  ] Reached target Remote File Systems (Pre).
[  OK  ] Reached target Remote File Systems.
[  OK  ] Reached target User and Group Name Lookups.
[  OK  ] Listening on Journal Socket.
[  OK  ] Listening on LVM2 metadata daemon socket.
[  OK  ] Reached target Swap.
[  OK  ] Created slice System Slice.
[  OK  ] Created slice system-serial\x2dgetty.slice.
         Starting Remount Root and Kernel File Systems...
         Mounting Huge Pages File System...
         Starting Increase datagram queue length...
[  OK  ] Reached target Slices.
         Mounting Debug File System...
         Starting Uncomplicated firewall...
         Starting Create Static Device Nodes in /dev...
[  OK  ] Started Read required files in advance.
[  OK  ] Created slice system-getty.slice.
         Starting Setup Virtual Console...
[  OK  ] Started Braille Device Support.
         Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
         Starting Load Kernel Modules...
[  OK  ] Mounted Debug File System.
[  OK  ] Mounted Huge Pages File System.
[  OK  ] Started Remount Root and Kernel File Systems.
[  OK  ] Started Increase datagram queue length.
[  OK  ] Started Uncomplicated firewall.
[  OK  ] Started Create Static Device Nodes in /dev.
[  OK  ] Started Setup Virtual Console.
[FAILED] Failed to start Load Kernel Modules.
See 'systemctl status systemd-modules-load.service' for details.
[  OK  ] Started LVM2 metadata daemon.
         Starting Apply Kernel Variables...
         Mounting FUSE Control File System...
         Starting udev Kernel Device Manager...
[  OK  ] Listening on Syslog Socket.
         Starting Journal Service...
         Starting Load/Save Random Seed...
         Starting udev Coldplug all Devices...
[  OK  ] Mounted FUSE Control File System.
[  OK  ] Started Apply Kernel Variables.
[  OK  ] Started Load/Save Random Seed.
[  OK  ] Started Journal Service.
         Starting Flush Journal to Persistent Storage...
[  OK  ] Started udev Kernel Device Manager.
[  OK  ] Reached target Local File Systems (Pre).
         Mounting /tmp...
[  OK  ] Mounted /tmp.
[  OK  ] Started Flush Journal to Persistent Storage.
[  OK  ] Started Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling.
[  OK  ] Reached target Local File Systems.
         Starting Set console keymap...
         Starting Clean up any mess left by 0dns-up...
         Starting Wait for all "auto" /etc/network/interfaces to be up for network-online.target...
         Starting Tell Plymouth To Write Out Runtime Data...
         Starting LSB: AppArmor initialization...
         Starting Create Volatile Files and Directories...
[  OK  ] Started udev Coldplug all Devices.
[  OK  ] Started Wait for all "auto" /etc/network/interfaces to be up for network-online.target.
[  OK  ] Started LSB: AppArmor initialization.
[  OK  ] Started Create Volatile Files and Directories.
[  OK  ] Started Clean up any mess left by 0dns-up.
[  OK  ] Found device /dev/ttyS0.
[  OK  ] Started Tell Plymouth To Write Out Runtime Data.
[  OK  ] Started Set console keymap.
[  OK  ] Reached target Sound Card.
         Starting Nameserver information manager...
[  OK  ] Reached target System Time Synchronized.
         Starting Update UTMP about System Boot/Shutdown...
[  OK  ] Started Nameserver information manager.
[  OK  ] Started Update UTMP about System Boot/Shutdown.
         Starting LSB: Raise network interfaces....
[  OK  ] Started LSB: Raise network interfaces..
[  OK  ] Reached target System Initialization.
[  OK  ] Started CUPS Scheduler.
[  OK  ] Started Daily Cleanup of Temporary Directories.
[  OK  ] Reached target Timers.
[  OK  ] Listening on CUPS Scheduler.
[  OK  ] Listening on D-Bus System Message Bus Socket.
[  OK  ] Listening on UUID daemon activation socket.
[  OK  ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
[  OK  ] Reached target Sockets.
[  OK  ] Started Trigger resolvconf update for networkd DNS.
[  OK  ] Reached target Paths.
[  OK  ] Reached target Basic System.
         Starting Accounts Service...
[  OK  ] Started D-Bus System Message Bus.
         Starting Avahi mDNS/DNS-SD Stack...
         Starting Login Service...
         Starting LSB: automatic crash report generation...
[  OK  ] Started Run anacron jobs.
         Starting Restore /etc/resolv.conf if the system crashed before the ppp link was shut down....
[  OK  ] Started CUPS Scheduler.
         Starting LSB: Speech Dispatcher...
         Starting LSB: Set the CPU Frequency Scaling governor to "ondemand"...
[  OK  ] Started crash report submission daemon.
[  OK  ] Started Regular background program processing daemon.
         Starting Ubuntu live CD installer...
         Starting LSB: handle special hotkeys of Apple computers...
         Starting Permit User Sessions...
         Starting Modem Manager...
         Starting LSB: daemon to balance interrupts for SMP systems...
[  OK  ] Started Avahi DNS Configuration Daemon.
         Starting System Logging Service...
         Starting Network Manager...
[  OK  ] Started Restore /etc/resolv.conf if the system crashed before the ppp link was shut down..
[  OK  ] Started Permit User Sessions.
[  OK  ] Started LSB: handle special hotkeys of Apple computers.
[  OK  ] Started LSB: Speech Dispatcher.
[  OK  ] Started LSB: Set the CPU Frequency Scaling governor to "ondemand".
[  OK  ] Started Ubuntu live CD installer.
[  OK  ] Started LSB: daemon to balance interrupts for SMP systems.
[  OK  ] Started Avahi mDNS/DNS-SD Stack.
[  OK  ] Started Make remote CUPS printers available locally.
         Starting Light Display Manager...
[  OK  ] Started System Logging Service.
[  OK  ] Started Login Service.
         Starting Authenticate and Authorize Users to Run Privileged Tasks...
[  OK  ] Started LSB: automatic crash report generation.
[  OK  ] Started Authenticate and Authorize Users to Run Privileged Tasks.
[  OK  ] Started Accounts Service.

Ubuntu Xenial Xerus (development branch) ubuntu-mate ttyS0

ubuntu-mate login: