Advertisement
Guest User

Meraki MX64W-A0 After Reboot

a guest
Nov 23rd, 2021
52
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. RESET pressed: USB boot enabled
  2. (Re)start USB...
  3. USB: Before reset, USB clk enable register is: 000000cd
  4. Before reset, USB clk enable register is: 000000cd
  5. usb2_reset_state is: 00000000
  6. Register 1212 NbrPorts 2
  7. USB EHCI 1.00
  8. scanning bus for devices... EHCI timed out on TD - token=0x80008c80
  9. 2 USB Device(s) found
  10. scanning bus for storage devices... 0 Storage Device(s) found
  11. ** Bad device usb 0 **
  12. Bad Bootkernel magic
  13.  
  14. NAND read: device 0 offset 0x100000, size 0x300000
  15. 3145728 bytes read: OK
  16. Uncompressing Linux... done, booting the kernel.
  17. [ 0.000000] Booting Linux on physical CPU 0
  18. [ 0.000000] Linux version 3.4.111 (mtahmed@sf201.meraki.com) (gcc version 4.8.3 (GCC) ) #2 Fri Jul 6 13:34:46 PDT 2018
  19. [ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d
  20. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  21. [ 0.000000] Machine: Meraki Wired-Arm-Nsp, model: Meraki wired-arm-nsp
  22. [ 0.000000] bootconsole [earlycon0] enabled
  23. [ 0.000000] Memory policy: ECC disabled, Data cache writeback
  24. [ 0.000000] BUG: mapping for 0x18000000 at 0xff000000 out of vmalloc space
  25. [ 0.000000] BUG: mapping for 0x19000000 at 0xff200000 out of vmalloc space
  26. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260080
  27. [ 0.000000] Kernel command line: console=ttyS0,115200n8 ubi.mtd=ubi mem=0x3fff0000 earlyprintk loader=u-boot part=bootkernel2
  28. [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  29. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  30. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  31. [ 0.000000] Memory: 1023MB = 1023MB total
  32. [ 0.000000] Memory: 1033284k/1033284k available, 15228k reserved, 0K highmem
  33. [ 0.000000] Virtual kernel memory layout:
  34. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  35. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  36. [ 0.000000] vmalloc : 0x80000000 - 0xff000000 (2032 MB)
  37. [ 0.000000] lowmem : 0x40000000 - 0x7fff0000 (1023 MB)
  38. [ 0.000000] modules : 0x3f000000 - 0x40000000 ( 16 MB)
  39. [ 0.000000] .text : 0x40008000 - 0x40310790 (3106 kB)
  40. [ 0.000000] .init : 0x40311000 - 0x405bf3b4 (2745 kB)
  41. [ 0.000000] .data : 0x405c0000 - 0x405e6588 ( 154 kB)
  42. [ 0.000000] .bss : 0x405e65ac - 0x40609e20 ( 143 kB)
  43. [ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  44. [ 0.000000] NR_IRQS:292
  45. [ 0.000000] Data abort at addr=0x0, fsr=0x1c06 ignored.
  46. [ 0.000000] sched_clock: 32 bits at 100 Hz, resolution 10000000ns, wraps every 4294967286ms
  47. [ 0.010000] Calibrating delay loop... 2393.70 BogoMIPS (lpj=11968512)
  48. [ 0.070000] pid_max: default: 32768 minimum: 301
  49. [ 0.070000] Mount-cache hash table entries: 512
  50. [ 0.080000] CPU: Testing write buffer coherency: ok
  51. [ 0.080000] Setting up static identity map for 0x60239b18 - 0x60239b70
  52. [ 0.090000] L310 cache controller enabled
  53. [ 0.090000] l2x0: 16 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x0a150000, Cache size: 524288 B
  54. [ 0.100000] devtmpfs: initialized
  55. [ 0.110000] NET: Registered protocol family 16
  56. [ 0.110000] gpiochip_add: registered GPIOs 0 to 31 on device: GPIOA
  57. [ 0.120000] iproc gpiochip add GPIOA
  58. [ 0.120000] GPIOA:ioaddr ff000060
  59. [ 0.130000] GPIOA:intr_ioaddr ff000000 dmu_ioaddr ff020000
  60. [ 0.130000] gpiochip_add: registered GPIOs 32 to 35 on device: GPIOB
  61. [ 0.140000] iproc gpiochip add GPIOB
  62. [ 0.140000] GPIOB:ioaddr ff030000
  63. [ 0.150000] Warning: No reset pin specified in config
  64. [ 0.150000] request_idm_timeout_interrupts: 600 entry
  65. [ 0.160000] idm_timeout_handler: 340, 0 entry
  66. [ 0.160000] idm_timeout_handler: 585 exit
  67. [ 0.160000] request_idm_timeout_interrupts: 696 exit
  68. [ 0.170000] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
  69. [ 0.180000] hw-breakpoint: maximum watchpoint size is 4 bytes.
  70. [ 0.190000] bio: create slab <bio-0> at 0
  71. [ 0.190000] usbcore: registered new interface driver usbfs
  72. [ 0.200000] usbcore: registered new interface driver hub
  73. [ 0.200000] usbcore: registered new device driver usb
  74. [ 0.210000] i2c-gpio i2c-gpio.6: using pins 5 (SDA) and 4 (SCL)
  75. [ 0.210000] Switching to clocksource iproc_gtimer
  76. [ 0.220000] NET: Registered protocol family 2
  77. [ 0.230000] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
  78. [ 0.240000] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
  79. [ 0.250000] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
  80. [ 0.250000] TCP: Hash tables configured (established 131072 bind 65536)
  81. [ 0.260000] TCP: reno registered
  82. [ 0.260000] UDP hash table entries: 512 (order: 1, 8192 bytes)
  83. [ 0.270000] UDP-Lite hash table entries: 512 (order: 1, 8192 bytes)
  84. [ 0.280000] NET: Registered protocol family 1
  85. [ 0.540000] PCIE0: LINKSTA reg 0xbe val 0x9012
  86. [ 0.540000] reg[0xac]=0x10, reg[0xae]=0x42, reg[0xb0]=0x8000, reg[0xb4]=0x2c10, reg[0xb6]=0x10, reg[0xb8]=0x5c12, reg[0xba]=0x65, reg[0xbe]=0x9012, reg[0xc6]=0x40, reg[0xca]=0x1, reg[0xd0]=0x1f, reg[0xd2]=0x8, reg[0xdc]=0x2, PCIE0 link=1
  87. [ 0.570000] PCI host bridge to bus 0000:00
  88. [ 0.570000] pci_bus 0000:00: root bus resource [mem 0x08000000-0x0fffffff]
  89. [ 0.580000] PCI: bus0: Fast back to back transfers disabled
  90. [ 0.580000] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
  91. [ 0.590000] PCI: bus1: Fast back to back transfers disabled
  92. [ 0.600000] PCIe map irq: 0000:00:00.00 slot 0, pin 1, irq: 163
  93. [ 0.600000] PCIe map irq: 0000:01:00.00 slot 0, pin 1, irq: 163
  94. [ 0.610000] pci 0000:00:00.0: BAR 8: assigned [mem 0x08000000-0x080fffff]
  95. [ 0.620000] pci 0000:01:00.0: BAR 0: assigned [mem 0x08000000-0x08007fff 64bit]
  96. [ 0.620000] pci 0000:00:00.0: PCI bridge to [bus 01-01]
  97. [ 0.630000] pci 0000:00:00.0: bridge window [mem 0x08000000-0x080fffff]
  98. [ 0.630000] PCI: enabling device 0000:00:00.0 (0140 -> 0143)
  99. [ 0.890000] PCIE1: LINKSTA reg 0xbe val 0x9012
  100. [ 0.890000] reg[0xac]=0x10, reg[0xae]=0x42, reg[0xb0]=0x8000, reg[0xb4]=0x2c10, reg[0xb6]=0x10, reg[0xb8]=0x5c12, reg[0xba]=0x65, reg[0xbe]=0x9012, reg[0xc6]=0x40, reg[0xca]=0x1, reg[0xd0]=0x1f, reg[0xd2]=0x8, reg[0xdc]=0x2, PCIE1 link=1
  101. [ 0.920000] PCI host bridge to bus 0001:00
  102. [ 0.920000] pci_bus 0001:00: root bus resource [mem 0x40000000-0x47ffffff]
  103. [ 0.930000] PCI: bus0: Fast back to back transfers disabled
  104. [ 0.930000] pci 0001:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
  105. [ 0.940000] PCI: bus1: Fast back to back transfers disabled
  106. [ 0.950000] PCIe map irq: 0000:00:00.00 slot 0, pin 1, irq: 163
  107. [ 0.950000] PCIe map irq: 0000:01:00.00 slot 0, pin 1, irq: 163
  108. [ 0.960000] PCIe map irq: 0001:00:00.00 slot 0, pin 1, irq: 169
  109. [ 0.970000] PCIe map irq: 0001:01:00.00 slot 0, pin 1, irq: 169
  110. [ 0.970000] pci 0001:00:00.0: BAR 8: assigned [mem 0x40000000-0x400fffff]
  111. [ 0.980000] pci 0001:01:00.0: BAR 0: assigned [mem 0x40000000-0x40007fff 64bit]
  112. [ 0.990000] pci 0001:00:00.0: PCI bridge to [bus 01-01]
  113. [ 0.990000] pci 0001:00:00.0: bridge window [mem 0x40000000-0x400fffff]
  114. [ 1.000000] PCI: enabling device 0001:00:00.0 (0140 -> 0143)
  115. [ 1.250000] PCIE2: LINKSTA reg 0xbe val 0x1001
  116. [ 1.260000] reg[0xac]=0x10, reg[0xae]=0x42, reg[0xb0]=0x8000, reg[0xb4]=0x2c10, reg[0xb6]=0x10, reg[0xb8]=0x5c12, reg[0xba]=0x65, reg[0xbe]=0x1001, reg[0xc6]=0x40, reg[0xca]=0x1, reg[0xd0]=0x1f, reg[0xd2]=0x8, reg[0xdc]=0x2, reg[0xde]=0x1, PCIE2 link=0
  117. [ 1.380000] pm_init: Initializing Power Management ....
  118. [ 1.390000] msgmni has been set to 2018
  119. [ 1.400000] io scheduler noop registered
  120. [ 1.400000] io scheduler deadline registered
  121. [ 1.400000] io scheduler cfq registered (default)
  122. [ 1.410000] iproc_pwmc_probe iobase ff031000 phys:18031000
  123. [ 1.410000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
  124. [ 1.420000] 18000300.uart: ttyS0 at MMIO 0x18000300 (irq = 117) is a 16550A
  125. [ 1.430000] console [ttyS0] enabled, bootconsole disabled
  126. [ 1.430000] console [ttyS0] enabled, bootconsole disabled
  127. [ 1.440000] at24 0-0050: 8192 byte 24c64 EEPROM, writable, 32 bytes/write
  128. [ 1.450000] ONFI param page 0 valid
  129. [ 1.450000] ONFI flash detected
  130. [ 1.450000] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xd3 (Micron MT29F8G08ABACAWP)
  131. [ 1.460000] iproc_nand: heuristics exception detected, Micron MT29F8G08ABACA
  132. [ 1.470000] iproc_nand: following bootloader settings
  133. [ 1.470000] iproc_nand: 1024MiB total, 256KiB blocks, 4KiB pages, 27B OOB, 8-bit
  134. [ 1.480000] iproc_nand: user oob per page: 46 bytes (4 steps)
  135. [ 1.490000] Bad block table found at page 262080, version 0x01
  136. [ 1.490000] Bad block table found at page 262016, version 0x01
  137. [ 1.500000] Bad block table found at page 262080, version 0x01
  138. [ 1.510000] Bad block table found at page 262016, version 0x01
  139. [ 1.510000] Creating 6 MTD partitions on "nand_iproc.0":
  140. [ 1.520000] 0x000000000000-0x000000200000 : "U-boot"
  141. [ 1.520000] 0x000000100000-0x000000400000 : "bootkernel1"
  142. [ 1.530000] 0x000000400000-0x000000500000 : "senao_nvram"
  143. [ 1.540000] 0x000000500000-0x000000800000 : "bootkernel2"
  144. [ 1.540000] 0x000000800000-0x00003ff00000 : "ubi"
  145. [ 1.550000] 0x000000000000-0x00003ff00000 : "all"
  146. [ 1.550000] iproc_nand: NAND controller driver is loaded
  147. [ 1.560000] UBI: attaching mtd4 to ubi0
  148. [ 1.560000] UBI: physical eraseblock size: 262144 bytes (256 KiB)
  149. [ 1.570000] UBI: logical eraseblock size: 253952 bytes
  150. [ 1.570000] UBI: smallest flash I/O unit: 4096
  151. [ 1.580000] UBI: VID header offset: 4096 (aligned 4096)
  152. [ 1.580000] UBI: data offset: 8192
  153. [ 6.670000] UBI: max. sequence number: 1408911
  154. [ 6.680000] UBI: attached mtd4 to ubi0
  155. [ 6.690000] UBI: MTD device name: "ubi"
  156. [ 6.690000] UBI: MTD device size: 1015 MiB
  157. [ 6.700000] UBI: number of good PEBs: 4060
  158. [ 6.700000] UBI: number of bad PEBs: 0
  159. [ 6.710000] UBI: number of corrupted PEBs: 0
  160. [ 6.710000] UBI: max. allowed volumes: 128
  161. [ 6.720000] UBI: wear-leveling threshold: 4096
  162. [ 6.720000] UBI: number of internal volumes: 1
  163. [ 6.730000] UBI: number of user volumes: 5
  164. [ 6.730000] UBI: available PEBs: 1647
  165. [ 6.730000] UBI: total number of reserved PEBs: 2413
  166. [ 6.740000] UBI: number of PEBs reserved for bad PEB handling: 40
  167. [ 6.750000] UBI: max/mean erase counter: 365/348
  168. [ 6.750000] UBI: image sequence number: 451051978
  169. [ 6.760000] UBI: background thread "ubi_bgt0d" started, PID 251
  170. [ 6.760000] tun: Universal TUN/TAP device driver, 1.6
  171. [ 6.770000] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  172. [ 6.780000] bcm5301x_gmac_init_module: NAPI2_POLL mode
  173. [ 6.780000] bcm5301x_gmac_probe enter name:bcmiproc-gmac0; id:0x0; unit:0
  174. [ 6.790000] NVRAM: map 0x1e0a0000
  175. [ 6.820000] et0: eth1addr not found, ignore it
  176. [ 6.820000] bcm5301x_gmac_probe enter name:bcmiproc-gmac1; id:0x0; unit:1
  177. [ 6.830000] et1: eth2addr not found, ignore it
  178. [ 6.830000] bcm5301x_gmac_probe enter name:bcmiproc-gmac2; id:0x0; unit:2
  179. [ 6.840000] si_doattach chipid: 0x3f00cf1e
  180. [ 6.840000] et2: base_addr (0x18024000) irq (181)
  181. [ 6.850000] etc_gmac_speed default GMAC2 speed: auto
  182. [ 6.850000] etc_attach() mdio_init_time = 5
  183. [ 6.860000] si_doattach: incoming bus is PCI but it's a lie, switching to SI devid:0xcf1c
  184. [ 6.870000] si_doattach chipid: 0x3f00cf1e
  185. [ 6.870000] si_attach socitype(0x3) chip(0xcf1e) chiprev(0x0) chippkg(0x0)
  186. [ 6.880000] et2: chipattach: phyaddr(0x1e)
  187. [ 6.880000] et2: chipattach: Calling robo attach
  188. [ 6.890000] bcm_robo_attach: devid32: 0x53025
  189. [ 6.950000] bcm_robo_enable_switch IPROC OTP is not configured, can not determine skuid
  190. [ 6.960000] bcm_robo_enable_switch Northstar Family chip
  191. [ 6.970000] bcm_robo_enable_switch Checking powered down port (0x0)
  192. [ 6.970000] eth0: Broadcom BCM5302x 10/100/1000 Mbps Ethernet Controller 6.30.40 (TOB) (r)
  193. [ 6.980000] eth_mac_proc_create: enter
  194. [ 6.990000]
  195. [ 6.990000] Creating fa bypass proc entry
  196. [ 6.990000] et_ctf_active enabled
  197. [ 6.990000] bcm5301x_gmac_probe enter name:bcmiproc-gmac3; id:0x0; unit:3
  198. [ 7.000000] et3: eth3addr not found, ignore it
  199. [ 7.010000] usbcore: registered new interface driver cdc_eem
  200. [ 7.010000] usbcore: registered new interface driver cdc_subset
  201. [ 7.020000] usbcore: registered new interface driver cdc_ncm
  202. [ 7.020000] usbcore: registered new interface driver cdc_acm
  203. [ 7.030000] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  204. [ 7.040000] usbcore: registered new interface driver usbserial
  205. [ 7.040000] usbcore: registered new interface driver usbserial_generic
  206. [ 7.050000] USB Serial support registered for generic
  207. [ 7.050000] usbserial: USB Serial Driver core
  208. [ 7.060000] usbcore: registered new interface driver option
  209. [ 7.060000] USB Serial support registered for GSM modem (1-port)
  210. [ 7.070000] usbcore: registered new interface driver qcserial
  211. [ 7.080000] USB Serial support registered for Qualcomm USB modem
  212. [ 7.080000] usbcore: registered new interface driver sierra
  213. [ 7.090000] USB Serial support registered for Sierra USB modem
  214. [ 7.090000] input: gpio-buttons.5 as /devices/gpio-buttons.5/input/input0
  215. [ 7.100000] i2c /dev entries driver
  216. [ 7.110000] GENPLL[5] mdiv=12 rate=1500000000
  217. [ 7.110000] GENPLL[5] mdiv=12 rate=1500000000
  218. [ 7.120000] sp805-wdt sp805-wdt: registration successful
  219. [ 7.130000] usbcore: registered new interface driver usbhid
  220. [ 7.130000] usbhid: USB HID core driver
  221. [ 7.130000] meraki-config board-data.2: Meraki config device loaded
  222. [ 7.140000] TCP: cubic registered
  223. [ 7.140000] NET: Registered protocol family 17
  224. [ 7.150000] NET: Registered protocol family 15
  225. [ 7.150000] 8021q: 802.1Q VLAN Support v1.8
  226. [ 7.160000] Registering SWP/SWPB emulation handler
  227. [ 7.160000] devtmpfs: mounted
  228. [ 7.170000] Freeing init memory: 2744K
  229. [ 7.170000] Made it into bootsh: Jul 6 2018 13:15:54
  230. [ 7.180000] bootsh build 201807061333ga9614cc2M
  231. [ 7.320000] UBIFS: recovery needed
  232. [ 7.420000] iproc_nand: uncorrectable error at 0x168a4400
  233. [ 7.450000] iproc_nand: uncorrectable error at 0x168a4400
  234. [ 7.470000] iproc_nand: uncorrectable error at 0x168a4400
  235. [ 7.500000] iproc_nand: uncorrectable error at 0x168a4400
  236. [ 7.520000] UBI error: ubi_io_read: error -74 (ECC error) while reading 139264 bytes from PEB 1410:122880, read 139264 bytes
  237. [ 7.530000] UBIFS error (pid 1): ubifs_recover_leb: corrupt empty space LEB 297:114688, corruption starts at 26026
  238. [ 7.540000] UBIFS error (pid 1): ubifs_scanned_corruption: corruption at LEB 297:140714
  239. [ 7.560000] UBIFS error (pid 1): ubifs_recover_leb: LEB 297 scanning failed
  240. [ 7.560000] mount_ubifs: mounting ubifs storage: Structure needs cleaning
  241. [ 7.620000] do_platform_specific_late_setup_wired_arm_nsp: resetting wifi radios
  242. [ 7.630000] /init: opening /sys/class/gpio/gpio16/value failed!: No such file or directory
  243. [ 7.640000]
  244. [ 7.640000] !!!!! {/init} failed writing /sys/class/gpio/gpio16/value len 1 data: "0"
  245. [ 7.650000] /init: opening /sys/class/gpio/gpio17/value failed!: No such file or directory
  246. [ 7.660000]
  247. [ 7.660000] !!!!! {/init} failed writing /sys/class/gpio/gpio17/value len 1 data: "0"
  248. [ 7.980000] /init: opening /sys/class/gpio/gpio16/value failed!: No such file or directory
  249. [ 7.980000]
  250. [ 7.980000] !!!!! {/init} failed writing /sys/class/gpio/gpio16/value len 1 data: "1"
  251. [ 7.990000] /init: opening /sys/class/gpio/gpio17/value failed!: No such file or directory
  252. [ 8.000000]
  253. [ 8.000000] !!!!! {/init} failed writing /sys/class/gpio/gpio17/value len 1 data: "1"
  254. In manufacturing[ 8.060000] /init: FALSE
  255. : reading file /storage/config: No such file or directory
  256. In manufacturing: FALSE
  257. [ 12.400000] Mapping 26820608 bytes for /dev/mtdblock/part.safe
  258. [ 12.440000] Meraki-build is wired-14-38-202004272129-G64b92676-rel-poof
  259. cksum computed: 0x1245 given: 0x1245
  260. found valid board data at 0x0
  261. cksum computed: 0x1245 given: 0x1245
  262. found valid board data at 0x0
  263. Using itb config kingpin2g (wired-arm-nsp configuration)
  264. Description: wired-arm-nsp Kernel
  265. Description: wired-arm-nsp Ramdisk
  266. Description: wired-arm-nsp Device Tree 2GB
  267. [ 16.400000] Starting new kernel
  268. [ 16.400000] Bye!
  269. [ 0.000000] Booting Linux on physical CPU 0
  270. [ 0.000000] Linux version 3.4.113 (jenkins@dal248.meraki.com) (gcc version 4.8.3 (GCC) ) #3 SMP Wed May 6 15:36:32 PDT 2020
  271. [ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d
  272. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  273. [ 0.000000] Machine: Meraki Wired-Arm-Nsp, model: Meraki MX64
  274. [ 0.000000] bootconsole [earlycon0] enabled
  275. [ 0.000000] Memory policy: ECC disabled, Data cache writealloc
  276. [ 0.000000] BUG: mapping for 0x18000000 at 0xff000000 out of vmalloc space
  277. [ 0.000000] BUG: mapping for 0x19000000 at 0xff200000 out of vmalloc space
  278. [ 0.000000] PERCPU: Embedded 7 pages/cpu @41017000 s5824 r8192 d14656 u32768
  279. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 390128
  280. [ 0.000000] Kernel command line: console=ttyS0,115200n8 ubi.mtd=ubi earlyprintk console=ttyS0,115200n8 earlyprintks
  281. [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  282. [ 0.000000] Dentry cache hash table entries: 262144 (order: 8, 1048576 bytes)
  283. [ 0.000000] Inode-cache hash table entries: 131072 (order: 7, 524288 bytes)
  284. [ 0.000000] Memory: 1535MB = 1535MB total
  285. [ 0.000000] Memory: 1536236k/1536236k available, 36564k reserved, 0K highmem
  286. [ 0.000000] Virtual kernel memory layout:
  287. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  288. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  289. [ 0.000000] vmalloc : 0xa0000000 - 0xff000000 (1520 MB)
  290. [ 0.000000] lowmem : 0x40000000 - 0x9fff0000 (1535 MB)
  291. [ 0.000000] modules : 0x3f000000 - 0x40000000 ( 16 MB)
  292. [ 0.000000] .text : 0x40008000 - 0x40378740 (3522 kB)
  293. [ 0.000000] .init : 0x40379000 - 0x4039c6c0 ( 142 kB)
  294. [ 0.000000] .data : 0x4039e000 - 0x403cc6e8 ( 186 kB)
  295. [ 0.000000] .bss : 0x403cc70c - 0x4040ced8 ( 258 kB)
  296. [ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
  297. [ 0.000000] Hierarchical RCU implementation.
  298. [ 0.000000] NR_IRQS:292
  299. [ 0.000000] sched_clock: 32 bits at 250 Hz, resolution 4000000ns, wraps every 4294967292ms
  300. [ 0.004000] Calibrating delay loop... 2390.01 BogoMIPS (lpj=4780032)
  301. [ 0.024000] pid_max: default: 32768 minimum: 301
  302. [ 0.028000] Mount-cache hash table entries: 512
  303. [ 0.032000] CPU: Testing write buffer coherency: ok
  304. [ 0.036000] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  305. [ 0.040000] smp_twd: clock not found: -2
  306. [ 0.044000] Calibrating local timer... 600.09MHz.
  307. [ 0.068000] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
  308. [ 0.072000] Setting up static identity map for 0x80291570 - 0x802915c8
  309. [ 0.076000] L310 cache controller enabled
  310. [ 0.080000] l2x0: 16 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x0a150000, Cache size: 524288 B
  311. [ 0.088000] CPU1: Booted secondary processor
  312. [ 0.140000] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  313. [ 0.144000] Brought up 2 CPUs
  314. [ 0.148000] SMP: Total of 2 processors activated (4780.03 BogoMIPS).
  315. [ 0.152000] devtmpfs: initialized
  316. [ 0.160000] NET: Registered protocol family 16
  317. [ 0.164000] gpiochip_add: registered GPIOs 0 to 31 on device: GPIOA
  318. [ 0.168000] iproc gpiochip add GPIOA
  319. [ 0.172000] GPIOA:ioaddr ff000060
  320. [ 0.176000] GPIOA:intr_ioaddr ff000000 dmu_ioaddr ff020000
  321. [ 0.180000] gpiochip_add: registered GPIOs 32 to 35 on device: GPIOB
  322. [ 0.184000] iproc gpiochip add GPIOB
  323. [ 0.188000] GPIOB:ioaddr ff030000
  324. [ 0.192000] request_idm_timeout_interrupts: 600 entry
  325. [ 0.196000] idm_timeout_handler: 340, 0 entry
  326. [ 0.200000] idm_timeout_handler: 585 exit
  327. [ 0.204000] request_idm_timeout_interrupts: 696 exit
  328. [ 0.208000] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
  329. [ 0.212000] hw-breakpoint: maximum watchpoint size is 4 bytes.
  330. [ 0.220000] bio: create slab <bio-0> at 0
  331. [ 0.224000] usbcore: registered new interface driver usbfs
  332. [ 0.228000] usbcore: registered new interface driver hub
  333. [ 0.232000] usbcore: registered new device driver usb
  334. [ 0.236000] i2c-gpio i2c-gpio.5: using pins 5 (SDA) and 4 (SCL)
  335. [ 0.240000] Switching to clocksource iproc_gtimer
  336. [ 0.248000] NET: Registered protocol family 2
  337. [ 0.256000] IP route cache hash table entries: 65536 (order: 6, 262144 bytes)
  338. [ 0.260000] TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
  339. [ 0.268000] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
  340. [ 0.276000] TCP: Hash tables configured (established 262144 bind 65536)
  341. [ 0.280000] TCP: reno registered
  342. [ 0.284000] UDP hash table entries: 1024 (order: 3, 32768 bytes)
  343. [ 0.288000] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
  344. [ 0.292000] NET: Registered protocol family 1
  345. [ 0.300000] Unpacking initramfs...
  346. [ 8.084000] Freeing initrd memory: 18456K
  347. [ 8.336000] PCIE0: LINKSTA reg 0xbe val 0x9012
  348. [ 8.340000] reg[0xac]=0x10, reg[0xae]=0x42, reg[0xb0]=0x8000, reg[0xb4]=0x2c10, reg[0xb6]=0x10, reg[0xb8]=0x5c12, reg[0xba]=0x65, reg[0xbe]=0x9012, reg[0xc6]=0x40, reg[0xca]=0x1, reg[0xd0]=0x1f, reg[0xd2]=0x8, reg[0xdc]=0x2, PCIE0 link=1
  349. [ 8.364000] PCI host bridge to bus 0000:00
  350. [ 8.368000] pci_bus 0000:00: root bus resource [mem 0x08000000-0x0fffffff]
  351. [ 8.372000] PCI: bus0: Fast back to back transfers disabled
  352. [ 8.376000] PCI: bus1: Fast back to back transfers disabled
  353. [ 8.384000] PCIe map irq: 0000:00:00.00 slot 0, pin 1, irq: 163
  354. [ 8.388000] PCIe map irq: 0000:01:00.00 slot 0, pin 1, irq: 163
  355. [ 8.392000] pci 0000:00:00.0: BAR 8: assigned [mem 0x08000000-0x080fffff]
  356. [ 8.396000] pci 0000:01:00.0: BAR 0: assigned [mem 0x08000000-0x08007fff 64bit]
  357. [ 8.400000] pci 0000:00:00.0: PCI bridge to [bus 01-01]
  358. [ 8.404000] pci 0000:00:00.0: bridge window [mem 0x08000000-0x080fffff]
  359. [ 8.408000] PCI: enabling device 0000:00:00.0 (0146 -> 0147)
  360. [ 8.660000] PCIE1: LINKSTA reg 0xbe val 0x9012
  361. [ 8.664000] reg[0xac]=0x10, reg[0xae]=0x42, reg[0xb0]=0x8000, reg[0xb4]=0x2c10, reg[0xb6]=0x10, reg[0xb8]=0x5c12, reg[0xba]=0x65, reg[0xbe]=0x9012, reg[0xc6]=0x40, reg[0xca]=0x1, reg[0xd0]=0x1f, reg[0xd2]=0x8, reg[0xdc]=0x2, PCIE1 link=1
  362. [ 8.688000] PCI host bridge to bus 0001:00
  363. [ 8.692000] pci_bus 0001:00: root bus resource [mem 0x40000000-0x47ffffff]
  364. [ 8.696000] PCI: bus0: Fast back to back transfers disabled
  365. [ 8.700000] PCI: bus1: Fast back to back transfers disabled
  366. [ 8.708000] PCIe map irq: 0000:00:00.00 slot 0, pin 1, irq: 163
  367. [ 8.712000] PCIe map irq: 0000:01:00.00 slot 0, pin 1, irq: 163
  368. [ 8.716000] PCIe map irq: 0001:00:00.00 slot 0, pin 1, irq: 169
  369. [ 8.720000] PCIe map irq: 0001:01:00.00 slot 0, pin 1, irq: 169
  370. [ 8.724000] pci 0001:00:00.0: BAR 8: assigned [mem 0x40000000-0x400fffff]
  371. [ 8.728000] pci 0001:01:00.0: BAR 0: assigned [mem 0x40000000-0x40007fff 64bit]
  372. [ 8.732000] pci 0001:00:00.0: PCI bridge to [bus 01-01]
  373. [ 8.736000] pci 0001:00:00.0: bridge window [mem 0x40000000-0x400fffff]
  374. [ 8.740000] PCI: enabling device 0001:00:00.0 (0146 -> 0147)
  375. [ 8.996000] PCIE2: LINKSTA reg 0xbe val 0x1001
  376. [ 9.000000] reg[0xac]=0x10, reg[0xae]=0x42, reg[0xb0]=0x8000, reg[0xb4]=0x2c10, reg[0xb6]=0x10, reg[0xb8]=0x5c12, reg[0xba]=0x65, reg[0xbe]=0x1001, reg[0xc6]=0x40, reg[0xca]=0x1, reg[0xd0]=0x1f, reg[0xd2]=0x8, reg[0xdc]=0x1, reg[0xde]=0x1, PCIE2 link=0
  377. [ 9.020000] pm_init: Initializing Power Management ....
  378. [ 9.116000] msgmni has been set to 3036
  379. [ 9.120000] io scheduler noop registered
  380. [ 9.124000] io scheduler deadline registered
  381. [ 9.128000] io scheduler cfq registered (default)
  382. [ 9.132000] iproc_pwmc_probe iobase ff031000 phys:18031000
  383. [ 9.136000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
  384. [ 9.144000] 18000300.uart: ttyS0 at MMIO 0x18000300 (irq = 117) is a 16550A
  385. [ 9.148000] console [ttyS0] enabled, bootconsole disabled
  386. [ 9.148000] console [ttyS0] enabled, bootconsole disabled
  387. [ 9.156000] Trying to register dev faulty etc
  388. [ 9.160000] at24 0-0050: 8192 byte 24c64 EEPROM, writable, 32 bytes/write
  389. [ 9.172000] ONFI param page 0 valid
  390. [ 9.176000] ONFI flash detected
  391. [ 9.180000] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xd3 (Micron MT29F8G08ABACAWP)
  392. [ 9.184000] iproc_nand: heuristics exception detected, Micron MT29F8G08ABACA
  393. [ 9.188000] iproc_nand: following bootloader settings
  394. [ 9.192000] iproc_nand: 1024MiB total, 256KiB blocks, 4KiB pages, 27B OOB, 8-bit
  395. [ 9.196000] iproc_nand: user oob per page: 46 bytes (4 steps)
  396. [ 9.200000] Bad block table found at page 262080, version 0x01
  397. [ 9.204000] Bad block table found at page 262016, version 0x01
  398. [ 9.208000] Bad block table found at page 262080, version 0x01
  399. [ 9.212000] Bad block table found at page 262016, version 0x01
  400. [ 9.216000] Creating 6 MTD partitions on "nand_iproc.0":
  401. [ 9.220000] 0x000000000000-0x000000200000 : "U-boot"
  402. [ 9.228000] 0x000000100000-0x000000400000 : "bootkernel1"
  403. [ 9.240000] 0x000000400000-0x000000500000 : "senao_nvram"
  404. [ 9.252000] 0x000000500000-0x000000800000 : "bootkernel2"
  405. [ 9.264000] 0x000000800000-0x00003ff00000 : "ubi"
  406. [ 9.272000] 0x000000000000-0x00003ff00000 : "all"
  407. [ 9.284000] iproc_nand: NAND controller driver is loaded
  408. [ 9.292000] UBI: attaching mtd4 to ubi0
  409. [ 9.296000] UBI: physical eraseblock size: 262144 bytes (256 KiB)
  410. [ 9.300000] UBI: logical eraseblock size: 253952 bytes
  411. [ 9.304000] UBI: smallest flash I/O unit: 4096
  412. [ 9.308000] UBI: VID header offset: 4096 (aligned 4096)
  413. [ 9.312000] UBI: data offset: 8192
  414. [ 14.472000] UBI: max. sequence number: 1408912
  415. [ 14.496000] UBI: attached mtd4 to ubi0
  416. [ 14.500000] UBI: MTD device name: "ubi"
  417. [ 14.504000] UBI: MTD device size: 1015 MiB
  418. [ 14.508000] UBI: number of good PEBs: 4060
  419. [ 14.512000] UBI: number of bad PEBs: 0
  420. [ 14.516000] UBI: number of corrupted PEBs: 0
  421. [ 14.520000] UBI: max. allowed volumes: 128
  422. [ 14.524000] UBI: wear-leveling threshold: 4096
  423. [ 14.528000] UBI: number of internal volumes: 1
  424. [ 14.532000] UBI: number of user volumes: 5
  425. [ 14.536000] UBI: available PEBs: 1647
  426. [ 14.540000] UBI: total number of reserved PEBs: 2413
  427. [ 14.544000] UBI: number of PEBs reserved for bad PEB handling: 40
  428. [ 14.548000] UBI: max/mean erase counter: 365/348
  429. [ 14.552000] UBI: image sequence number: 451051978
  430. [ 14.556000] UBI: background thread "ubi_bgt0d" started, PID 403
  431. [ 14.612000] tun: Universal TUN/TAP device driver, 1.6
  432. [ 14.620000] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  433. [ 14.624000] bcm5301x_gmac_init_module: NAPI2_POLL mode
  434. [ 14.628000] bcm5301x_gmac_probe enter name:bcmiproc-gmac0; id:0x0; unit:0
  435. [ 14.632000] NVRAM: map 0x1e0a0000
  436. [ 14.660000] et0: eth1addr not found, ignore it
  437. [ 14.668000] bcm5301x_gmac_probe enter name:bcmiproc-gmac1; id:0x0; unit:1
  438. [ 14.672000] et1: eth2addr not found, ignore it
  439. [ 14.680000] bcm5301x_gmac_probe enter name:bcmiproc-gmac2; id:0x0; unit:2
  440. [ 14.684000] si_doattach chipid: 0x3f00cf1e
  441. [ 14.688000] et2: base_addr (0x18024000) irq (181)
  442. [ 14.692000] etc_gmac_speed default GMAC2 speed: auto
  443. [ 14.696000] etc_attach() mdio_init_time = 5
  444. [ 14.700000] si_doattach: incoming bus is PCI but it's a lie, switching to SI devid:0xcf1c
  445. [ 14.704000] si_doattach chipid: 0x3f00cf1e
  446. [ 14.708000] si_attach socitype(0x3) chip(0xcf1e) chiprev(0x0) chippkg(0x0)
  447. [ 14.712000] et2: chipattach: phyaddr(0x1e)
  448. [ 14.716000] et2: chipattach: Calling robo attach
  449. [ 14.720000] bcm_robo_attach: devid32: 0x53025
  450. [ 14.788000] bcm_robo_enable_switch IPROC OTP is not configured, can not determine skuid
  451. [ 14.792000] bcm_robo_enable_switch Northstar Family chip
  452. [ 14.796000] bcm_robo_enable_switch Checking powered down port (0x0)
  453. [ 14.804000] eth0: Broadcom BCM5302x 10/100/1000 Mbps Ethernet Controller 6.30.40 (TOB) (r)
  454. [ 14.812000] eth_mac_proc_create: enter
  455. [ 14.816000]
  456. [ 14.816000] Creating fa bypass proc entry
  457. [ 14.820000] et_ctf_active enabled
  458. [ 14.824000] bcm5301x_gmac_probe enter name:bcmiproc-gmac3; id:0x0; unit:3
  459. [ 14.828000] et3: eth3addr not found, ignore it
  460. [ 14.832000] PPP generic driver version 2.4.2
  461. [ 14.840000] PPP BSD Compression module registered
  462. [ 14.844000] PPP Deflate Compression module registered
  463. [ 14.848000] NET: Registered protocol family 24
  464. [ 14.852000] usbcore: registered new interface driver cdc_ether
  465. [ 14.856000] usbcore: registered new interface driver cdc_eem
  466. [ 14.864000] usbcore: registered new interface driver cdc_subset
  467. [ 14.868000] usbcore: registered new interface driver sierra_net
  468. [ 14.876000] usbcore: registered new interface driver cdc_ncm
  469. [ 14.880000] Initial usb2h clock is: 000000cd
  470. [ 14.884000] Initial usb2h clock now is: 000000cd
  471. [ 14.892000] Initial usb2_reset_state is: 00000000
  472. [ 14.896000] usbcore: registered new interface driver cdc_acm
  473. [ 14.900000] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  474. [ 14.912000] usbcore: registered new interface driver usbserial
  475. [ 14.916000] usbserial: USB Serial Driver core
  476. [ 14.920000] usbcore: registered new interface driver option
  477. [ 14.928000] USB Serial support registered for GSM modem (1-port)
  478. [ 14.932000] usbcore: registered new interface driver qcserial
  479. [ 14.940000] USB Serial support registered for Qualcomm USB modem
  480. [ 14.948000] usbcore: registered new interface driver sierra
  481. [ 14.952000] USB Serial support registered for Sierra USB modem
  482. [ 14.960000] input: gpio-buttons.6 as /devices/gpio-buttons.6/input/input0
  483. [ 14.964000] i2c /dev entries driver
  484. [ 14.976000] GENPLL[5] mdiv=12 rate=1500000000
  485. [ 14.980000] GENPLL[5] mdiv=12 rate=1500000000
  486. [ 14.984000] sp805-wdt sp805-wdt: registration successful
  487. [ 15.012000] usbcore: registered new interface driver usbhid
  488. [ 15.016000] usbhid: USB HID core driver
  489. [ 15.024000] meraki-config board-data.2: Meraki config device loaded
  490. [ 15.028000] TCP: cubic registered
  491. [ 15.032000] Initializing XFRM netlink socket
  492. [ 15.036000] NET: Registered protocol family 17
  493. [ 15.040000] NET: Registered protocol family 15
  494. [ 15.044000] L2TP core driver, V2.0
  495. [ 15.048000] PPPoL2TP kernel driver, V2.0
  496. [ 15.052000] 8021q: 802.1Q VLAN Support v1.8
  497. [ 15.056000] Registering SWP/SWPB emulation handler
  498. [ 15.068000] devtmpfs: mounted
  499. [ 15.072000] Freeing init memory: 140K
  500. [ 15.084000] Made it into bootsh: May 6 2020 15:29:52
  501. [ 15.088000] bootsh build wired-14-38-202004272129-G64b92676-rel-poof
  502. [ 15.156000] /init: writing to fd 3 failed!: Device or resource busy
  503. [ 15.160000]
  504. [ 15.160000] !!!!! {/init} failed writing /sys/class/gpio/export errno 16 len 1 data: "6"
  505. [ 15.244000] UBIFS: recovery needed
  506. [ 15.344000] iproc_nand: uncorrectable error at 0x168a4400
  507. [ 15.372000] iproc_nand: uncorrectable error at 0x168a4400
  508. [ 15.396000] iproc_nand: uncorrectable error at 0x168a4400
  509. [ 15.420000] iproc_nand: uncorrectable error at 0x168a4400
  510. [ 15.440000] UBI error: ubi_io_read: error -74 (ECC error) while reading 139264 bytes from PEB 1410:122880, read 139264 bytes
  511. [ 15.444000] UBIFS error (pid 1): ubifs_recover_leb: corrupt empty space LEB 297:114688, corruption starts at 26026
  512. [ 15.448000] UBIFS error (pid 1): ubifs_scanned_corruption: corruption at LEB 297:140714
  513. [ 15.456000] UBIFS error (pid 1): ubifs_recover_leb: LEB 297 scanning failed
  514. [ 15.484000] mount_ubifs: mounting ubifs storage: Structure needs cleaning
  515. In manufacturing[ 15.544000] /init: FALSE
  516. In rma : mode: FALSE
  517. reading file /sys/class/gpio/gpio6/value: No such file or directory
  518. [ 15.556000]
  519. [ 15.556000] !!!!! {/init} reading /sys/class/gpio/gpio6/value failed [2]: No such file or directory
  520. init started: BusyBox v1.25.1 (2020-05-06 13:45:54 PDT)
  521. /bin/sh: syntax error: unexpected ")"
  522. WARNING! THIS CONSOLE IS LOGGED! UNAUTHORIZED ACCESS FORBIDDEN!
  523. <Meraki> [ 15.728000] sysctl: error: 'vm.extfrag_threshold' is an unknown key
  524. [ 15.752000] sysctl: The scan_unevictable_pages sysctl/node-interface has been disabled for lack of a legitimate use case. If you have one, please send an email to linux-mm@kvack.org.
  525. [ 16.284000] device eth0 entered promiscuous mode
  526. [ 16.292000] Cannot change rx-checksumming
  527. [ 16.296000] Cannot change tx-checksumming
  528. [ 16.304000] Cannot change scatter-gather
  529. [ 16.308000] Cannot change tcp-segmentation-offload
  530. [ 16.316000] Cannot change rx-vlan-offload
  531. [ 16.320000] Cannot change tx-vlan-offload
  532. [ 16.648000] grep: /storage/config: No such file or directory
  533. [ 16.712000] /usr/bin/sync_log: Unknown file system:
  534. [ 16.720000] /usr/bin/sync_log: failed while checking for high frequency write support: Unknown error -1
  535. [ 16.752000] GENPLL[5] mdiv=12 rate=1500000000
  536. [ 16.756000] sysctl -w vm.panic_on_oom=2
  537. [ 16.764000] vm.panic_on_oom = 2
  538. [ 16.844000] click: starting router thread pid 873 (9a5ea000)
  539. [ 16.908000] elts_meraki: module license 'unspecified' taints kernel.
  540. [ 17.088000] Single synchronous check for reset
  541. [ 17.148000] GobiNet: 2013-10-08/NTGR_2.21
  542. [ 17.152000] usbcore: registered new interface driver GobiNet
  543. [ 17.180000] usbcore: registered new interface driver GobiSerial
  544. [ 17.184000] USB Serial support registered for GobiSerial
  545. [ 17.188000] GobiSerial: 2013-10-08/NTGR_2.12:GobiSerial
  546. [ 17.232000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  547. [ 17.240000] bcm-ehci bcm-ehci.0: bcm-ehci
  548. [ 17.244000] bcm-ehci bcm-ehci.0: new USB bus registered, assigned bus number 1
  549. [ 17.252000] busnum 1: ehci_halt() failed, err=-110
  550. [ 17.260000] bcm-ehci bcm-ehci.0: can't setup
  551. [ 17.264000] bcm-ehci bcm-ehci.0: USB bus 1 deregistered
  552. [ 17.268000] bcm-ehci bcm-ehci.0: usb_add_hcd failed
  553. [ 17.272000] bcm-ehci bcm-ehci.0: probe failed: -110
  554. [ 17.280000] bcm-ehci: probe of bcm-ehci.0 failed with error -110
  555. [ 17.280000] et2 Link Up: 0FD
  556. [ 17.308000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  557. [ 17.316000] bcm-ohci bcm-ohci.0: bcm-ohci
  558. [ 17.320000] bcm-ohci bcm-ohci.0: new USB bus registered, assigned bus number 1
  559. [ 17.328000] bcm-ohci bcm-ohci.0: irq 111, io mem 0xff02b000
  560. [ 17.392000] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
  561. [ 17.396000] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  562. [ 17.404000] usb usb1: Product: bcm-ohci
  563. [ 17.408000] usb usb1: Manufacturer: Linux 3.4.113 ohci_hcd
  564. [ 17.412000] usb usb1: SerialNumber: bcm-ohci
  565. [ 17.420000] hub 1-0:1.0: USB hub found
  566. [ 17.424000] hub 1-0:1.0: 2 ports detected
  567. [ 17.428000] bcm-ohci bcm-ohci.0: probe done
  568. [ 17.480000] wl: module license 'Proprietary' taints kernel.
  569. [ 17.516000] PCI: enabling device 0000:01:00.0 (0140 -> 0142)
  570. [ 17.568000] apr0v0: Broadcom BCM4360 802.11 Wireless Controller 6.37.14.105_e1.4.1.5 (r485445)
  571. [ 17.572000] PCI: enabling device 0001:01:00.0 (0140 -> 0142)
  572. [ 17.624000] apr1v0: Broadcom BCM4360 802.11 Wireless Controller 6.37.14.105_e1.4.1.5 (r485445)
  573. [ 17.820000]
  574. [ 17.828000] boot 1 build wired-14-38-202004272129-G64b92676-rel-poof board wired-arm-nsp mac E0:55:3D:8C:68:B0
  575. [ 17.840000] /usr/bin/snort-version
  576. [ 17.848000] Module: dummy .text=0x3f000000 .data=0x3f0003f4 .bss=
  577. [ 17.848000] Module: proclikefs .text=0x3f004000 .data= .bss=0x3f004b40
  578. [ 17.848000] Module: merakiclick .text=0x3f009000 .data=0x3f10b704 .bss=0x3f10b980
  579. [ 17.848000] Module: elts_meraki .text=0x3f214000 .data=0x3f5305d4 .bss=0x3f532bdc
  580. [ 17.848000] Module: GobiNet .text=0x3f725000 .data=0x3f72e588 .bss=0x3f72e7d8
  581. [ 17.848000] Module: GobiSerial .text=0x3f735000 .data=0x3f735e80 .bss=0x3f73634c
  582. [ 17.848000] Module: bcmmdio .text=0x3f73a000 .data=0x3f73a370 .bss=0x3f73a5b8
  583. [ 17.848000] Module: ehci_hcd .text=0x3f73e000 .data=0x3f74866c .bss=0x3f7488c0
  584. [ 17.848000] Module: ohci_hcd .text=0x3f750000 .data=0x3f756108 .bss=0x3f75633c
  585. [ 17.848000] Module: wl .text=0x3f75d000 .data=0x3fa967b8 .bss=0x3fb17c90
  586. [ 18.000000] ramoops: platform device not found, using module parameters
  587. [ 18.072000] phram: phram-oops device: 0x10000 at 0xdfff0000
  588. [ 18.164000] cksum computed: 0x1245 given: 0x1245
  589. [ 18.164000] found valid board data at 0x0
  590. [ 18.164000] cksum computed: 0x1245 given: 0x1245
  591. [ 18.164000] found valid board data at 0x0
  592. [ 20.848000] chatter: RealRFC4305AEAD initialized with driver authenc(hmac(sha1-generic),rfc3686(ctr(aes-generic)))
  593. [ 20.852000] chatter: RealRFC4305AEAD initialized with driver authenc(hmac(sha1-generic),rfc3686(ctr(aes-generic)))
  594. [ 20.856000] chatter: RealRFC4305AEAD initialized with driver authenc(hmac(sha1-generic),rfc3686(ctr(aes-generic)))
  595. [ 20.860000] chatter: RealRFC4305AEAD initialized with driver authenc(hmac(sha1-generic),rfc3686(ctr(aes-generic)))
  596. [ 20.864000] chatter: RealRFC4305AEAD initialized with driver authenc(hmac(sha1-generic),rfc3686(ctr(aes-generic)))
  597. [ 20.868000] chatter: RealRFC4305AEAD initialized with driver authenc(hmac(sha1-generic),rfc3686(ctr(aes-generic)))
  598. [ 20.872000] chatter: RealRFC4305AEAD initialized with driver authenc(hmac(sha1-generic),rfc3686(ctr(aes-generic)))
  599. [ 21.140000] wl0: _wl_add_meraki_monitor_if
  600. [ 21.508000] wl1: _wl_add_meraki_monitor_if
  601. [ 21.636000] chatter: from_nat_client_routing/all_routes :: RadixIPLookup: no route for 239.255.255.250
  602. [ 21.636000] chatter: to_bird :: ToHost: device 'bird' went down
  603. [ 21.652000] chatter: to_bird :: ToHost: device 'bird' came up
  604. [ 21.856000] chatter: from_nat_client_routing/all_routes :: RadixIPLookup: no route for 239.255.255.250
  605. [ 22.320000] chatter: from_nat_client_routing/all_routes :: RadixIPLookup: no route for 239.255.255.250
  606. [ 22.640000] chatter: from_nat_client_routing/all_routes :: RadixIPLookup: no route for 224.0.0.251
  607. [ 22.644000] chatter: from_nat_client_routing/all_routes :: RadixIPLookup: no route for 224.0.0.251
  608. [ 33.832000]
  609. [ 33.832000] !!!!! {/usr/bin/wired_brain} failed writing /click/mon0_decap/rogue_shootdown/entering_channel errno 2 len 1 data: "1"
  610. [ 33.848000]
  611. [ 33.848000] !!!!! {/usr/bin/wired_brain} failed writing /click/ap_steering/set_chan_phytype errno 2 len 11 data: "0 1 20 0 ht"
  612. [ 33.872000]
  613. [ 33.872000] !!!!! {/usr/bin/wired_brain} failed writing /click/mon1_decap/rogue_shootdown/entering_channel errno 2 len 2 data: "44"
  614. [ 33.884000]
  615. [ 33.884000] !!!!! {/usr/bin/wired_brain} failed writing /click/ap_steering/set_chan_phytype errno 2 len 13 data: "1 44 80 1 vht"
  616. [ 34.444000] chatter: _to_linux_test_client :: ToHost: device 'test_client' went down
  617. [ 35.436000]
  618. [ 35.436000] !!!!! {/usr/bin/wired_brain} failed writing /sys/devices/system/cpu/cpu1/online errno 22 len 1 data: "1"
  619. [ 35.472000]
  620. [ 35.472000] !!!!! {/usr/bin/config_updater} failsafe_mode "value='0' state='0' bootloop='0' ver='1' " ""
  621. [ 35.580000] chatter: big_acl :: BigACL: skipping undersized restore buffer (buf size: 0)
  622. [ 37.728000] chatter: apr0v1_port/dev_queue/unshaped_q :: Queue: overflow
  623. [ 37.736000] chatter: apr0v2_port/dev_queue/unshaped_q :: Queue: overflow
  624. [ 37.744000] chatter: apr0v3_port/dev_queue/unshaped_q :: Queue: overflow
  625. [ 37.748000] chatter: apr0v4_port/dev_queue/unshaped_q :: Queue: overflow
  626. [ 37.756000] chatter: apr1v1_port/dev_queue/unshaped_q :: Queue: overflow
  627. [ 37.764000] chatter: apr1v2_port/dev_queue/unshaped_q :: Queue: overflow
  628. [ 37.768000] chatter: apr1v3_port/dev_queue/unshaped_q :: Queue: overflow
  629. [ 37.776000] chatter: apr1v4_port/dev_queue/unshaped_q :: Queue: overflow
Advertisement
Advertisement
Advertisement
RAW Paste Data Copied
Advertisement