ASUS Merlin 388.6 flash

May  5 07:05:09 syslogd started: BusyBox v1.25.1
May  5 07:05:09 kernel: klogd started: BusyBox v1.25.1 (2023-12-02 12:49:52 EST)
May  5 07:05:09 crashlog: ^A
May  5 07:05:09 kernel: Booting Linux on physical CPU 0x0000000000 [0x420f1000]
May  5 07:05:09 kernel: Linux version 4.19.183 (merlin@ubuntu-dev) (gcc version 9.2.0 (Buildroot 2019.11.1)) #1 SMP PREEMPT Sat Dec 2 12:50:18 EST 2023
May  5 07:05:09 kernel: Machine model: RTAX86U_PRO
May  5 07:05:09 kernel: earlycon: pl11 at MMIO 0x00000000ff812000 (options '115200n8')
May  5 07:05:09 kernel: bootconsole [pl11] enabled
May  5 07:05:09 kernel: Reserved memory: created CMA memory pool at 0x0000000035000000, size 176 MiB
May  5 07:05:09 crashlog: <5>Linux version 4.19.183 (merlin@ubuntu-dev) (gcc version 9.2.0 (Buildroot 2019.11.1)) #1 SMP PREEMPT Thu Dec 21 16:10:59 EST 2023
May  5 07:05:09 kernel: OF: reserved mem: initialized node dt_reserved_cma, compatible id shared-dma-pool
May  5 07:05:09 crashlog: <6>Machine model: RTAX86U_PRO
May  5 07:05:09 kernel: psci: probing for conduit method from DT.
May  5 07:05:09 kernel: psci: PSCIv1.1 detected in firmware.
May  5 07:05:09 kernel: psci: Using standard PSCI v0.2 function IDs
May  5 07:05:09 kernel: psci: MIGRATE_INFO_TYPE not supported.
May  5 07:05:09 crashlog: <6>earlycon: pl11 at MMIO 0x00000000ff812000 (options '115200n8')
May  5 07:05:09 kernel: psci: SMC Calling Convention v1.1
May  5 07:05:09 kernel: random: get_random_bytes called from start_kernel+0x9c/0x454 with crng_init=0
May  5 07:05:09 kernel: percpu: Embedded 32 pages/cpu s93080 r8192 d29800 u131072
May  5 07:05:09 crashlog: <6>bootconsole [pl11] enabled
May  5 07:05:09 kernel: Detected VIPT I-cache on CPU0
May  5 07:05:09 kernel: CPU features: enabling workaround for ARM erratum 843419
May  5 07:05:09 crashlog: <6>Reserved memory: created CMA memory pool at 0x0000000035000000, size 176 MiB
May  5 07:05:09 kernel: CPU features: enabling workaround for ARM erratum 845719
May  5 07:05:09 kernel: Speculative Store Bypass Disable mitigation not required
May  5 07:05:09 kernel: CPU features: detected: Kernel page table isolation (KPTI)
May  5 07:05:09 kernel: Built 1 zonelists, mobility grouping on.  Total pages: 258048
May  5 07:05:09 kernel: Kernel command line: coherent_pool=4M cpuidle_sysfs_switch pci=pcie_bus_safe console=ttyAMA0,115200 earlycon rootwait mtdparts=brcmnand.0:2097152(loader),264241152@2097152(image),524288@266338304(crashlog) root=/dev/ubiblock0_6 ubi.mtd=image ubi.block=0,6 rootfstype=squashfs cma=0M
May  5 07:05:09 crashlog: <6>OF: reserved mem: initialized node dt_reserved_cma, compatible id shared-dma-pool
May  5 07:05:09 kernel: log_buf_len individual max cpu contribution: 16384 bytes
May  5 07:05:09 kernel: log_buf_len total cpu_extra contributions: 49152 bytes
May  5 07:05:09 kernel: log_buf_len min size: 65536 bytes
May  5 07:05:09 kernel: log_buf_len: 131072 bytes
May  5 07:05:09 crashlog: <7>On node 0 totalpages: 262144
May  5 07:05:09 kernel: early log buf free: 63260(96%)
May  5 07:05:09 kernel: Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
May  5 07:05:09 kernel: Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
May  5 07:05:09 crashlog: <7>  DMA32 zone: 4096 pages used for memmap
May  5 07:05:09 kernel: Memory: 838116K/1048576K available (6782K kernel code, 486K rwdata, 1668K rodata, 448K init, 383K bss, 30236K reserved, 180224K cma-reserved)
May  5 07:05:09 kernel: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
May  5 07:05:09 kernel: rcu: Preemptible hierarchical RCU implementation.
May  5 07:05:09 kernel:     Tasks RCU enabled.
May  5 07:05:09 crashlog: <7>  DMA32 zone: 0 pages reserved
May  5 07:05:09 kernel: NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
May  5 07:05:09 kernel: GIC: Using split EOI/Deactivate mode
May  5 07:05:09 kernel: arch_timer: cp15 timer(s) running at 50.00MHz (phys).
May  5 07:05:09 kernel: clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xb8812736b, max_idle_ns: 440795202655 ns
May  5 07:05:09 crashlog: <7>  DMA32 zone: 262144 pages, LIFO batch:63
May  5 07:05:09 kernel: sched_clock: 56 bits at 50MHz, resolution 20ns, wraps every 4398046511100ns
May  5 07:05:09 kernel: BRCM Legacy Drivers' Helper, all legacy drivers' IO memories/interrupts should be remapped here
May  5 07:05:09 kernel:      Remapping interrupts...
May  5 07:05:09 kernel:              hwirq      virq
May  5 07:05:09 crashlog: <6>psci: probing for conduit method from DT.
May  5 07:05:09 kernel:                51         5
May  5 07:05:09 kernel:                60         6
May  5 07:05:09 kernel:                61         7
May  5 07:05:09 kernel:               107         8
May  5 07:05:09 crashlog: <6>psci: PSCIv1.1 detected in firmware.
May  5 07:05:09 kernel:               108         9
May  5 07:05:09 kernel:               109        10
May  5 07:05:09 crashlog: <6>psci: Using standard PSCI v0.2 function IDs
May  5 07:05:09 kernel:               110        11
May  5 07:05:09 kernel:               111        12
May  5 07:05:09 kernel:               112        13
May  5 07:05:09 kernel:               113        14
May  5 07:05:09 crashlog: <6>psci: MIGRATE_INFO_TYPE not supported.
May  5 07:05:09 kernel:               114        15
May  5 07:05:09 kernel:               115        16
May  5 07:05:09 kernel:               116        17
May  5 07:05:09 kernel:               117        18
May  5 07:05:09 crashlog: <6>psci: SMC Calling Convention v1.1
May  5 07:05:09 kernel:               118        19
May  5 07:05:09 kernel:               119        20
May  5 07:05:09 kernel:               120        21
May  5 07:05:09 kernel:               121        22
May  5 07:05:09 kernel:               122        23
May  5 07:05:09 crashlog: <5>random: get_random_bytes called from start_kernel+0x9c/0x454 with crng_init=0
May  5 07:05:09 kernel:               123        24
May  5 07:05:09 kernel:               124        25
May  5 07:05:09 kernel:               125        26
May  5 07:05:09 kernel:               126        27
May  5 07:05:09 crashlog: <6>percpu: Embedded 32 pages/cpu s93080 r8192 d29800 u131072
May  5 07:05:09 kernel:               127        28
May  5 07:05:09 kernel:               128        29
May  5 07:05:09 kernel:               129        30
May  5 07:05:09 kernel:               130        31
May  5 07:05:09 crashlog: <7>pcpu-alloc: s93080 r8192 d29800 u131072 alloc=32*4096
May  5 07:05:09 kernel:               131        32
May  5 07:05:09 kernel:               132        33
May  5 07:05:09 kernel:               133        34
May  5 07:05:09 kernel:               134        35
May  5 07:05:09 crashlog: <7>pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
May  5 07:05:09 kernel:               135        36
May  5 07:05:09 kernel:               136        37
May  5 07:05:09 kernel:               137        38
May  5 07:05:09 kernel:               138        39
May  5 07:05:09 crashlog: <6>Detected VIPT I-cache on CPU0
May  5 07:05:09 kernel:               139        40
May  5 07:05:09 kernel:                73        41
May  5 07:05:09 kernel:                74        42
May  5 07:05:09 crashlog: <6>CPU features: enabling workaround for ARM erratum 843419
May  5 07:05:09 kernel:                99        43
May  5 07:05:09 kernel:                69        44
May  5 07:05:09 kernel:      Remapping IO memories...
May  5 07:05:09 kernel:              phys              virt          size
May  5 07:05:09 crashlog: <6>CPU features: enabling workaround for ARM erratum 845719
May  5 07:05:09 kernel:        00000000ff800000  ffffff8008024000  00003500
May  5 07:05:09 kernel:        00000000ff85a000  ffffff800800d000  00001000
May  5 07:05:09 kernel:        00000000ff810000  ffffff800802a000  00001300
May  5 07:05:09 kernel:        00000000ff812000  ffffff8008030000  00003000
May  5 07:05:09 crashlog: <6>Speculative Store Bypass Disable mitigation not required
May  5 07:05:09 kernel:        00000000ffe00000  ffffff8008b00000  00100000
May  5 07:05:09 kernel:        00000000ff860000  ffffff8008034000  00002000
May  5 07:05:09 kernel:        0000000083010a00  ffffff8008015a00  00000100
May  5 07:05:09 kernel:        0000000080040000  ffffff8008040000  00040000
May  5 07:05:09 crashlog: <6>CPU features: detected: Kernel page table isolation (KPTI)
May  5 07:05:09 kernel:        0000000080144000  ffffff8008021000  00001000
May  5 07:05:09 kernel:        0000000080148000  ffffff8008090000  00008b00
May  5 07:05:09 kernel:        0000000080158000  ffffff800802d000  00000400
May  5 07:05:09 kernel:        0000000080160000  ffffff80080a0000  0000e000
May  5 07:05:09 crashlog: <6>Built 1 zonelists, mobility grouping on.  Total pages: 258048
May  5 07:05:09 kernel:        0000000080140000  ffffff8008038000  00004000
May  5 07:05:09 kernel:        0000000082890000  ffffff80080b0000  0000ac00
May  5 07:05:09 kernel:        0000000082000000  ffffff8009000000  00caf004
May  5 07:05:09 crashlog: <5>Kernel command line: coherent_pool=4M cpuidle_sysfs_switch pci=pcie_bus_safe console=ttyAMA0,115200 earlycon rootwait mtdparts=brcmnand.0:2097152(loader),264241152@2097152(image),524288@266338304(crashlog) root=/dev/ubiblock0_4 ubi.mtd=image ubi.block=
May  5 07:05:09 kernel:        0000000083400000  ffffff800a000000  00400000
May  5 07:05:09 kernel:        0000000080008000  ffffff8008084000  00004000
May  5 07:05:09 kernel:        00000000800c0000  ffffff80080c0000  0000ffff
May  5 07:05:09 kernel:        0000000081060000  ffffff800808c000  00003000
May  5 07:05:09 kernel:        0000000083800000  ffffff800a800000  00450000
May  5 07:05:09 crashlog: 0,4 rootfstype=squashfs cma=0M
May  5 07:05:09 kernel:        0000000080130000  ffffff80080d4000  00004000
May  5 07:05:09 kernel:        00000000837f0000  ffffff80080e0000  00008000
May  5 07:05:09 kernel:        00000000828b2000  ffffff800803d000  00001000
May  5 07:05:09 kernel:        0000000081100000  ffffff8008d00000  00091000
May  5 07:05:09 crashlog: <6>log_buf_len individual max cpu contribution: 16384 bytes
May  5 07:05:09 kernel:        0000000080020000  ffffff80080ec000  00004000
May  5 07:05:09 kernel:        0000000083000000  ffffff8008081000  00001000
May  5 07:05:09 kernel:        0000000083030000  ffffff80080f4000  00004000
May  5 07:05:09 kernel:        0000000083038000  ffffff8008aa4000  00004000
May  5 07:05:09 crashlog: <6>log_buf_len total cpu_extra contributions: 49152 bytes
May  5 07:05:09 kernel:        0000000083040000  ffffff8008aac000  00004000
May  5 07:05:09 kernel:        0000000083048000  ffffff8008ab4000  00004000
May  5 07:05:09 kernel:        0000000083020000  ffffff8008abc000  00004000
May  5 07:05:09 kernel:        0000000083010000  ffffff8008ac4000  00004000
May  5 07:05:09 crashlog: <6>log_buf_len min size: 65536 bytes
May  5 07:05:09 kernel:        0000000083018000  ffffff8008acc000  00004000
May  5 07:05:09 kernel:        0000000083058000  ffffff8008ad4000  00004000
May  5 07:05:09 kernel:        0000000083060000  ffffff8008adc000  00004000
May  5 07:05:09 crashlog: <6>log_buf_len: 131072 bytes
May  5 07:05:09 kernel:        0000000083070000  ffffff8008ae4000  00004000
May  5 07:05:09 kernel:        0000000083078000  ffffff8008aec000  00004000
May  5 07:05:09 kernel:        0000000083080000  ffffff8008af4000  00004000
May  5 07:05:09 kernel:        0000000083050000  ffffff8008c04000  00004000
May  5 07:05:09 crashlog: <6>early log buf free: 63260(96%)
May  5 07:05:09 kernel:        0000000083028000  ffffff8008c0c000  00004000
May  5 07:05:09 kernel:        0000000083088000  ffffff8008c14000  00004000
May  5 07:05:09 kernel:        00000000810a0000  ffffff8008089000  00001000
May  5 07:05:09 kernel:        0000000083090000  ffffff800809a000  00000400
May  5 07:05:09 kernel:        0000000083094000  ffffff800809c000  00000400
May  5 07:05:09 crashlog: <6>Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
May  5 07:05:09 kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 100.00 BogoMIPS (lpj=50000)
May  5 07:05:09 kernel: pid_max: default: 32768 minimum: 301
May  5 07:05:09 kernel: Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
May  5 07:05:09 kernel: Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes)
May  5 07:05:09 crashlog: <6>Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
May  5 07:05:09 kernel: ASID allocator initialised with 32768 entries
May  5 07:05:09 kernel: rcu: Hierarchical SRCU implementation.
May  5 07:05:09 kernel: mtusize 1500
May  5 07:05:09 crashlog: <6>Memory: 838116K/1048576K available (6782K kernel code, 486K rwdata, 1668K rodata, 448K init, 384K bss, 30236K reserved, 180224K cma-reserved)
May  5 07:05:09 kernel: CCI hardware cache coherency enabled
May  5 07:05:09 kernel: bootloader version  U-Boot 2019.07 (Dec 02 2023 - 13:55:51 -0500), Build: 5.04L.0
May  5 07:05:09 kernel: inMemNvramData.szBoardId RTAX86U_PRO
May  5 07:05:09 kernel: smp: Bringing up secondary CPUs ...
May  5 07:05:09 crashlog: <6>SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
May  5 07:05:09 kernel: Detected VIPT I-cache on CPU1
May  5 07:05:09 kernel: CPU1: Booted secondary processor 0x0000000001 [0x420f1000]
May  5 07:05:09 kernel: Detected VIPT I-cache on CPU2
May  5 07:05:09 kernel: CPU2: Booted secondary processor 0x0000000002 [0x420f1000]
May  5 07:05:09 crashlog: <6>rcu: Preemptible hierarchical RCU implementation.
May  5 07:05:09 kernel: Detected VIPT I-cache on CPU3
May  5 07:05:09 kernel: CPU3: Booted secondary processor 0x0000000003 [0x420f1000]
May  5 07:05:09 kernel: smp: Brought up 1 node, 4 CPUs
May  5 07:05:09 kernel: SMP: Total of 4 processors activated.
May  5 07:05:09 crashlog: <6>   Tasks RCU enabled.
May  5 07:05:09 kernel: CPU features: detected: 32-bit EL0 Support
May  5 07:05:09 kernel: CPU: All CPU(s) started at EL2
May  5 07:05:09 kernel: alternatives: patching kernel code
May  5 07:05:09 kernel: devtmpfs: initialized
May  5 07:05:09 crashlog: <6>NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
May  5 07:05:09 kernel: clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
May  5 07:05:09 kernel: futex hash table entries: 1024 (order: 4, 65536 bytes)
May  5 07:05:09 kernel: pinctrl core: initialized pinctrl subsystem
May  5 07:05:09 crashlog: <6>GIC: Using split EOI/Deactivate mode
May  5 07:05:09 kernel: size of sk_buff 512
May  5 07:05:09 kernel: offset of cb in sk_buff 368
May  5 07:05:09 kernel: NET: Registered protocol family 16
May  5 07:05:09 crashlog: <6>arch_timer: cp15 timer(s) running at 50.00MHz (phys).
May  5 07:05:09 kernel: cpuidle: using governor menu
May  5 07:05:09 kernel: PMC driver initcall
May  5 07:05:09 kernel: PMC driver scanning DT
May  5 07:05:09 kernel: pmc match PMC brcm,bca-pmc-3-2
May  5 07:05:09 crashlog: <6>clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xb8812736b, max_idle_ns: 440795202655 ns
May  5 07:05:09 kernel:      Remapping PMC IO memories...
May  5 07:05:09 kernel:              phys              virt          size
May  5 07:05:09 kernel:      0x00000000ffb01018 0xffffff8008dd0018 0x00005080
May  5 07:05:09 kernel:      0x00000000ffb20000 0xffffff800809e000 0x00000240
May  5 07:05:09 crashlog: <6>sched_clock: 56 bits at 50MHz, resolution 20ns, wraps every 4398046511100ns
May  5 07:05:09 kernel:      0x00000000ffb00400 0xffffff80080bc400 0x000005d0
May  5 07:05:09 kernel:      0x00000000ffb80000 0xffffff80080be000 0x00001000
May  5 07:05:09 kernel: pmc_init:PMC using DQM mode
May  5 07:05:09 kernel: DMA: preallocated 4096 KiB pool for atomic allocations
May  5 07:05:09 crashlog: <6>BRCM Legacy Drivers' Helper, all legacy drivers' IO memories/interrupts should be remapped here
May  5 07:05:09 kernel: Serial: AMBA PL011 UART driver
May  5 07:05:09 kernel: Powering on XRDP core...
May  5 07:05:09 kernel: Toggle reset of XRDP core...
May  5 07:05:09 kernel: bcm_rsvmem plat_rsvmem_cached_device: assigned reserved memory node dt_reserved_cma
May  5 07:05:09 crashlog: <6>     Remapping interrupts...
May  5 07:05:09 kernel: bcm_rsvmem plat_rsvmem_uncached_device: assigned reserved memory node dt_reserved_cma
May  5 07:05:09 kernel: reserved CMA memory bufmem virt addr ffffff800b052000 phys addr 0x0000000035000000 size 0x8000000 cached=0
May  5 07:05:09 kernel: reserved CMA memory rnrmem virt addr ffffff8013053000 phys addr 0x000000003d000000 size 0xc00000 cached=0
May  5 07:05:09 crashlog: <6>             hwirq      virq
May  5 07:05:09 kernel: reserved CMA memory dhd0 virt addr ffffff8013c54000 phys addr 0x000000003dc00000 size 0xb00000 cached=0
May  5 07:05:09 kernel: reserved CMA memory dhd1 virt addr ffffff8014755000 phys addr 0x000000003e700000 size 0xb00000 cached=0
May  5 07:05:09 kernel: reserved CMA memory dhd2 virt addr ffffff8015256000 phys addr 0x000000003f200000 size 0xb00000 cached=0
May  5 07:05:09 kernel: bcm-bca-gpio ff800500.gpioc: Setting up BCA GPIO
May  5 07:05:09 crashlog: <6>               51         5
May  5 07:05:09 kernel: bca_extintr ff800004.bca_extintr0: Ext_Int_0 HWIrq 79 virq 57
May  5 07:05:09 kernel: bca_extintr ff800004.bca_extintr0: Ext_Int_1 HWIrq 80 virq 58
May  5 07:05:09 kernel: bca_extintr ff800004.bca_extintr0: Ext_Int_2 HWIrq 81 virq 59
May  5 07:05:09 kernel: bca_extintr ff800004.bca_extintr0: Ext_Int_3 HWIrq 82 virq 60
May  5 07:05:09 crashlog: <6>               60         6
May  5 07:05:09 kernel: bca_extintr ff800004.bca_extintr0: Ext_Int_4 HWIrq 83 virq 61
May  5 07:05:09 kernel: bca_extintr ff800004.bca_extintr0: Ext_Int_5 HWIrq 84 virq 62
May  5 07:05:09 kernel: bca_extintr ff800004.bca_extintr0: Ext_Int_6 HWIrq 85 virq 63
May  5 07:05:09 kernel: bca_extintr ff800004.bca_extintr0: Ext_Int_7 HWIrq 86 virq 64
May  5 07:05:09 crashlog: <6>               61         7
May  5 07:05:09 kernel: bca_extintr ff800004.bca_extintr0: Readed resouce bca_extintr0 start 0xff800004 end 0xff80004b
May  5 07:05:09 kernel: ff812000.serial0: ttyAMA0 at MMIO 0xff812000 (irq = 65, base_baud = 0) is a PL011 rev3
May  5 07:05:09 kernel: console [ttyAMA0] enabled
May  5 07:05:09 crashlog: <6>              107         8
May  5 07:05:09 kernel: bootconsole [pl11] disabled
May  5 07:05:09 kernel: bcm-bca-cled-ctrl ff803000.led_ctrl: max supported leds 64[64]
May  5 07:05:09 kernel: bcm-bca-cled-ctrl ff803000.led_ctrl:  Parallel CLED interface found
May  5 07:05:09 kernel: cryptd: max_cpu_qlen set to 1000
May  5 07:05:09 crashlog: <6>              108         9
May  5 07:05:09 kernel: map_hw_timer_interrupt,162: interrupt_id 66
May  5 07:05:09 kernel: map_hw_timer_interrupt,162: interrupt_id 67
May  5 07:05:09 kernel: map_hw_timer_interrupt,162: interrupt_id 68
May  5 07:05:09 kernel: map_hw_timer_interrupt,162: interrupt_id 69
May  5 07:05:09 crashlog: <6>              109        10
May  5 07:05:09 kernel: bcm-bca-leds ff803000.led_ctrl:parallel-port_0-led_1: HW led 19 registered
May  5 07:05:09 kernel: bcm-bca-leds ff803000.led_ctrl:parallel-port_1-led_1: HW led 8 registered
May  5 07:05:09 kernel: bcm-bca-leds ff803000.led_ctrl:parallel-port_2-led_1: HW led 7 registered
May  5 07:05:09 kernel: bcm-bca-leds ff803000.led_ctrl:parallel-port_3-led_1: HW led 5 registered
May  5 07:05:09 crashlog: <6>              110        11
May  5 07:05:09 kernel: bcm-bca-leds ff803000.led_ctrl:parallel-port_4-led_1: HW led 4 registered
May  5 07:05:09 kernel: bcm-bca-leds ff803000.led_ctrl:parallel-port_5-led_2: HW led 17 registered
May  5 07:05:09 kernel: pinctrl-bcmbca ff800554.pinctrl: bcmbca_gpio_request called for GPIO 1
May  5 07:05:09 crashlog: <6>              111        12
May  5 07:05:09 kernel: bcm-bca-leds ff803000.led_ctrl:led_gpio_1: SW led 1 registered
May  5 07:05:09 kernel: pinctrl-bcmbca ff800554.pinctrl: bcmbca_gpio_request called for GPIO 15
May  5 07:05:09 kernel: bcm-bca-leds ff803000.led_ctrl:led_gpio_15: SW led 15 registered
May  5 07:05:09 crashlog: <6>              112        13
May  5 07:05:09 kernel: pinctrl-bcmbca ff800554.pinctrl: bcmbca_gpio_request called for GPIO 16
May  5 07:05:09 kernel: bcm-bca-leds ff803000.led_ctrl:led_gpio_16: SW led 16 registered
May  5 07:05:09 kernel: pinctrl-bcmbca ff800554.pinctrl: bcmbca_gpio_request called for GPIO 2
May  5 07:05:09 kernel: bcm-bca-leds ff803000.led_ctrl:led_gpio_2: SW led 2 registered
May  5 07:05:09 crashlog: <6>              113        14
May  5 07:05:09 kernel: pinctrl-bcmbca ff800554.pinctrl: bcmbca_gpio_request called for GPIO 14
May  5 07:05:09 kernel: bcm-bca-leds ff803000.led_ctrl:led_gpio_14: SW led 14 registered
May  5 07:05:09 kernel: Broadcom GBPM v0.1 initialized
May  5 07:05:09 kernel: Broadcom IQoS v1.0 initialized
May  5 07:05:09 crashlog: <6>              114        15
May  5 07:05:09 kernel: Broadcom Logger v0.1
May  5 07:05:09 kernel: /dev/bcmnet Char device registered
May  5 07:05:09 kernel: skb_free_task created successfully with start budget 256
May  5 07:05:09 kernel: ^[[0;34mBLOG v3.0 Initialized^[[0m
May  5 07:05:09 crashlog: <6>              115        16
May  5 07:05:09 kernel: BLOG Rule v1.0 Initialized
May  5 07:05:09 kernel: Skip Legacy Led init
May  5 07:05:09 kernel: bca_led_request_sw_led:L634 adsl-led led not found
May  5 07:05:09 crashlog: <6>              116        17
May  5 07:05:09 kernel: bca_led_request_sw_led:L634 adsl-fail-led led not found
May  5 07:05:09 kernel: bca_led_request_sw_led:L634 sec-adsl-led led not found
May  5 07:05:09 kernel: bca_led_request_sw_led:L634 sec-adsl-fail-led led not found
May  5 07:05:09 kernel: bca_led_request_sw_led:L634 wan-data-led led not found
May  5 07:05:09 crashlog: <6>              117        18
May  5 07:05:09 kernel: bca_led_request_sw_led:L634 wan-data-fail-led led not found
May  5 07:05:09 kernel: bca_led_request_sw_led:L634 wl-sess-led led not found
May  5 07:05:09 kernel: bca_led_request_sw_led:L634 voip-led led not found
May  5 07:05:09 kernel: bca_led_request_sw_led:L634 voip1-ok-led led not found
May  5 07:05:09 crashlog: <6>              118        19
May  5 07:05:09 kernel: bca_led_request_sw_led:L634 voip1-fail-led led not found
May  5 07:05:09 kernel: bca_led_request_sw_led:L634 voip2-ok-led led not found
May  5 07:05:09 kernel: bca_led_request_sw_led:L634 voip2-fail-led led not found
May  5 07:05:09 kernel: bca_led_request_sw_led:L634 pots-led led not found
May  5 07:05:09 crashlog: <6>              119        20
May  5 07:05:09 kernel: bca_led_request_sw_led:L634 dect-led led not found
May  5 07:05:09 kernel: bca_led_request_sw_led:L634 wl0-led led not found
May  5 07:05:09 kernel: bca_led_request_sw_led:L634 wl1-led led not found
May  5 07:05:09 kernel: bca_led_request_sw_led:L634 usb-led led not found
May  5 07:05:09 crashlog: <6>              120        21
May  5 07:05:09 kernel: bca_led_request_sw_led:L634 sim-led led not found
May  5 07:05:09 kernel: bca_led_request_sw_led:L634 sim-itms-led led not found
May  5 07:05:09 kernel: clocksource: Switched to clocksource arch_sys_counter
May  5 07:05:09 crashlog: <6>              121        22
May  5 07:05:09 kernel: NET: Registered protocol family 2
May  5 07:05:09 kernel: tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes)
May  5 07:05:09 kernel: TCP established hash table entries: 8192 (order: 4, 65536 bytes)
May  5 07:05:09 kernel: TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
May  5 07:05:09 crashlog: <6>              122        23
May  5 07:05:09 kernel: TCP: Hash tables configured (established 8192 bind 8192)
May  5 07:05:09 kernel: UDP hash table entries: 512 (order: 2, 16384 bytes)
May  5 07:05:09 kernel: UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
May  5 07:05:09 kernel: NET: Registered protocol family 1
May  5 07:05:09 crashlog: <6>              123        24
May  5 07:05:09 kernel: Initialise system trusted keyrings
May  5 07:05:09 kernel: workingset: timestamp_bits=62 max_order=18 bucket_order=0
May  5 07:05:09 kernel: squashfs: version 4.0 (2009/01/31) Phillip Lougher
May  5 07:05:09 crashlog: <6>              124        25
May  5 07:05:09 kernel: jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
May  5 07:05:09 kernel: fuse init (API version 7.27)
May  5 07:05:09 kernel: Key type asymmetric registered
May  5 07:05:09 kernel: Asymmetric key parser 'x509' registered
May  5 07:05:09 crashlog: <6>              125        26
May  5 07:05:09 kernel: io scheduler noop registered (default)
May  5 07:05:09 kernel: io scheduler mq-deadline registered
May  5 07:05:09 kernel: io scheduler kyber registered
May  5 07:05:09 crashlog: <6>              126        27
May  5 07:05:09 kernel: iproc-rng200 ff800b80.rng: hwrng registered
May  5 07:05:09 kernel: brd: module loaded
May  5 07:05:09 kernel: loop: module loaded
May  5 07:05:09 kernel: nand: device found, Manufacturer ID: 0xc2, Chip ID: 0xda
May  5 07:05:09 kernel: nand: Macronix MX30LF2G28AD
May  5 07:05:09 crashlog: <6>              127        28
May  5 07:05:09 kernel: nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 128
May  5 07:05:09 kernel: bcm63xx_nand ff801800.nand: Adjust timing_1 to 0x6532845b timing_2 to 0x00091e94
May  5 07:05:09 kernel: bcm63xx_nand ff801800.nand: detected 256MiB total, 128KiB blocks, 2KiB pages, 27B OOB, 8-bit, BCH-8
May  5 07:05:09 kernel: Bad block table found at page 131008, version 0x01
May  5 07:05:09 crashlog: <6>              128        29
May  5 07:05:09 kernel: Bad block table found at page 130944, version 0x01
May  5 07:05:09 kernel: 3 cmdlinepart partitions found on MTD device brcmnand.0
May  5 07:05:09 kernel: Creating 3 MTD partitions on "brcmnand.0":
May  5 07:05:09 kernel: 0x000000000000-0x000000200000 : "loader"
May  5 07:05:09 crashlog: <6>              129        30
May  5 07:05:09 kernel: 0x000000200000-0x00000fe00000 : "image"
May  5 07:05:09 kernel: 0x00000fe00000-0x00000fe80000 : "crashlog"
May  5 07:05:09 kernel: bcm63xx-hsspi ff801000.spi: spi driver using polling mode
May  5 07:05:09 kernel: IMQ driver loaded successfully. (numdevs = 3, numqueues = 1, imq_dev_accurate_stats = 1)
May  5 07:05:09 crashlog: <6>              130        31
May  5 07:05:09 kernel:     Hooking IMQ after NAT on PREROUTING.
May  5 07:05:09 kernel:     Hooking IMQ before NAT on POSTROUTING.
May  5 07:05:09 crashlog: <6>              131        32
May  5 07:05:09 kernel: libphy: Fixed MDIO Bus: probed
May  5 07:05:09 kernel: PPP generic driver version 2.4.2
May  5 07:05:09 kernel: PPP BSD Compression module registered
May  5 07:05:09 kernel: PPP MPPE Compression module registered
May  5 07:05:09 crashlog: <6>              132        33
May  5 07:05:09 kernel: NET: Registered protocol family 24
May  5 07:05:09 kernel: PPTP driver version 0.8.5
May  5 07:05:09 kernel: i2c /dev entries driver
May  5 07:05:09 kernel: sdhci: Secure Digital Host Controller Interface driver
May  5 07:05:09 crashlog: <6>              133        34
May  5 07:05:09 kernel: sdhci: Copyright(c) Pierre Ossman
May  5 07:05:09 kernel: sdhci-pltfm: SDHCI platform and OF driver helper
May  5 07:05:09 kernel: mmc0: SDHCI controller on ff810000.sdhci [ff810000.sdhci] using ADMA
May  5 07:05:09 kernel: hidraw: raw HID events driver (C) Jiri Kosina
May  5 07:05:09 crashlog: <6>              134        35
May  5 07:05:09 kernel: GACT probability NOT on
May  5 07:05:09 kernel: Mirror/redirect action on
May  5 07:05:09 kernel: u32 classifier
May  5 07:05:09 kernel:     Performance counters on
May  5 07:05:09 crashlog: <6>              135        36
May  5 07:05:09 kernel:     input device check on
May  5 07:05:09 kernel:     Actions configured
May  5 07:05:09 kernel: xt_time: kernel timezone is -0000
May  5 07:05:09 kernel: gre: GRE over IPv4 demultiplexor driver
May  5 07:05:09 crashlog: <6>              136        37
May  5 07:05:09 kernel: ip_gre: GRE over IPv4 tunneling driver
May  5 07:05:09 kernel: IPv4 over IPsec tunneling driver
May  5 07:05:09 kernel: NET: Registered protocol family 10
May  5 07:05:09 kernel: Segment Routing with IPv6
May  5 07:05:09 crashlog: <6>              137        38
May  5 07:05:09 kernel: sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
May  5 07:05:09 kernel: ip6_gre: GRE over IPv6 tunneling driver
May  5 07:05:09 kernel: NET: Registered protocol family 17
May  5 07:05:09 crashlog: <6>              138        39
May  5 07:05:09 kernel: NET: Registered protocol family 15
May  5 07:05:09 kernel: l2tp_core: L2TP core driver, V2.0
May  5 07:05:09 kernel: l2tp_ppp: PPPoL2TP kernel driver, V2.0
May  5 07:05:09 kernel: 8021q: 802.1Q VLAN Support v1.8
May  5 07:05:09 crashlog: <6>              139        40
May  5 07:05:09 kernel: sctp: Hash tables configured (bind 256/256)
May  5 07:05:09 kernel: brcmboard registered
May  5 07:05:09 kernel: brcmboard: brcm_board_init entry
May  5 07:05:09 kernel: Last RESET due to Unknown
May  5 07:05:09 crashlog: <6>               73        41
May  5 07:05:09 kernel: RESET reason: 0x00000000
May  5 07:05:09 kernel: DYING GASP IRQ Initialized and Enabled
May  5 07:05:09 kernel: bcm_i2c: Error in loading module
May  5 07:05:09 crashlog: <6>               74        42
May  5 07:05:09 kernel: Optical detection module loaded.
May  5 07:05:09 kernel: Bridge Broadcom hooks registered
May  5 07:05:09 kernel: ebt_blog registered
May  5 07:05:09 kernel: ebt_ftos registered
May  5 07:05:09 kernel: ebt_qos_map registered
May  5 07:05:09 crashlog: <6>               99        43
May  5 07:05:09 kernel: ebt_time registered
May  5 07:05:09 kernel: ebt_vtag registered
May  5 07:05:09 kernel: ebt_wmm_mark registered
May  5 07:05:09 kernel: ebt_reject registered
May  5 07:05:09 crashlog: <6>               69        44
May  5 07:05:09 kernel: brcm-rgmii 837ff1b4.rgmii: registered
May  5 07:05:09 kernel: brcm-unimac 828a8000.unimac: registered
May  5 07:05:09 kernel: brcm-mdio 837ffd00.mdiosf2: switch_mdio_base=0xffffff8008c9dd00
May  5 07:05:09 kernel: brcm-mdio 837ffd00.mdiosf2:  registered
May  5 07:05:09 crashlog: <6>     Remapping IO memories...
May  5 07:05:09 kernel: brcm-ephyled 837ff1ac.ephyled: registered
May  5 07:05:09 kernel: Loading compiled-in X.509 certificates
May  5 07:05:09 kernel: ubi0: attaching mtd2
May  5 07:05:09 kernel: ubi0: scanning is finished
May  5 07:05:09 crashlog: <6>             phys              virt          size
May  5 07:05:09 kernel: ubi0: attached mtd2 (name "image", size 252 MiB)
May  5 07:05:09 kernel: ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
May  5 07:05:09 kernel: ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
May  5 07:05:09 kernel: ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
May  5 07:05:09 crashlog: <6>       00000000ff800000  ffffff8008024000  00003500
May  5 07:05:09 kernel: ubi0: good PEBs: 2016, bad PEBs: 0, corrupted PEBs: 0
May  5 07:05:09 kernel: ubi0: user volume: 9, internal volumes: 1, max. volumes count: 128
May  5 07:05:09 kernel: ubi0: max/mean erase counter: 58/30, WL threshold: 4096, image sequence number: 2077728035
May  5 07:05:09 kernel: ubi0: available PEBs: 313, total reserved PEBs: 1703, PEBs reserved for bad PEB handling: 40
May  5 07:05:09 crashlog: <6>       00000000ff85a000  ffffff800800d000  00001000
May  5 07:05:09 kernel: ubi0: background thread "ubi_bgt0d" started, PID 118
May  5 07:05:09 kernel: block ubiblock0_6: created from ubi0:6(rootfs2)
May  5 07:05:09 kernel: Registered phy device: EGPHY:0x1
May  5 07:05:09 kernel: Registered phy device: EGPHY:0x2
May  5 07:05:09 crashlog: <6>       00000000ff810000  ffffff800802a000  00001300
May  5 07:05:09 kernel: Registered phy device: EGPHY:0x3
May  5 07:05:09 kernel: Registered phy device: EGPHY:0x4
May  5 07:05:09 kernel: Registered phy device: EGPHY:0x19
May  5 07:05:09 kernel: Registered phy device: EXT3:0x11
May  5 07:05:09 crashlog: <6>       00000000ff812000  ffffff8008030000  00003000
May  5 07:05:09 kernel: Registered phy device: 10GAE:0x6
May  5 07:05:09 kernel: VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
May  5 07:05:09 kernel: devtmpfs: mounted
May  5 07:05:09 crashlog: <6>       00000000ffe00000  ffffff8008b00000  00100000
May  5 07:05:09 kernel: Freeing unused kernel memory: 448K
May  5 07:05:09 kernel: Run /sbin/init as init process
May  5 07:05:09 kernel: UBIFS (ubi0:10): background thread "ubifs_bgt0_10" started, PID 213
May  5 07:05:09 kernel: UBIFS (ubi0:10): recovery needed
May  5 07:05:09 crashlog: <6>       00000000ff860000  ffffff8008034000  00002000
May  5 07:05:09 kernel: UBIFS (ubi0:10): recovery completed
May  5 07:05:09 kernel: UBIFS (ubi0:10): UBIFS: mounted UBI device 0, volume 10, name "data"
May  5 07:05:09 kernel: UBIFS (ubi0:10): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
May  5 07:05:09 kernel: UBIFS (ubi0:10): FS size: 19808256 bytes (18 MiB, 156 LEBs), journal size 1015809 bytes (0 MiB, 8 LEBs)
May  5 07:05:09 crashlog: <6>       0000000083010a00  ffffff8008015a00  00000100
May  5 07:05:09 kernel: UBIFS (ubi0:10): reserved for root: 935592 bytes (913 KiB)
May  5 07:05:09 kernel: UBIFS (ubi0:10): media format: w5/r0 (latest is w5/r0), UUID F9D4EE6A-99CB-4B8A-B617-D978EDA3716A, small LPT model
May  5 07:05:09 kernel: UBIFS (ubi0:11): background thread "ubifs_bgt0_11" started, PID 229
May  5 07:05:09 kernel: UBIFS (ubi0:11): recovery needed
May  5 07:05:09 crashlog: <6>       0000000080040000  ffffff8008040000  00040000
May  5 07:05:09 kernel: UBIFS (ubi0:11): recovery completed
May  5 07:05:09 kernel: UBIFS (ubi0:11): UBIFS: mounted UBI device 0, volume 11, name "defaults"
May  5 07:05:09 kernel: UBIFS (ubi0:11): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
May  5 07:05:09 crashlog: <6>       0000000080144000  ffffff8008021000  00001000
May  5 07:05:09 kernel: UBIFS (ubi0:11): FS size: 7237632 bytes (6 MiB, 57 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs)
May  5 07:05:09 kernel: UBIFS (ubi0:11): reserved for root: 341850 bytes (333 KiB)
May  5 07:05:09 kernel: UBIFS (ubi0:11): media format: w5/r0 (latest is w5/r0), UUID AE50FBA1-83AF-4C14-B6B2-E5477F6AE6FC, small LPT model
May  5 07:05:09 kernel: UBIFS (ubi0:13): background thread "ubifs_bgt0_13" started, PID 259
May  5 07:05:09 crashlog: <6>       0000000080148000  ffffff8008090000  00008b00
May  5 07:05:09 kernel: UBIFS (ubi0:13): recovery needed
May  5 07:05:09 kernel: UBIFS (ubi0:13): recovery completed
May  5 07:05:09 kernel: UBIFS (ubi0:13): UBIFS: mounted UBI device 0, volume 13, name "jffs2"
May  5 07:05:09 kernel: UBIFS (ubi0:13): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
May  5 07:05:09 crashlog: <6>       0000000080158000  ffffff800802d000  00000400
May  5 07:05:09 kernel: UBIFS (ubi0:13): FS size: 51171328 bytes (48 MiB, 403 LEBs), journal size 2539520 bytes (2 MiB, 20 LEBs)
May  5 07:05:09 kernel: UBIFS (ubi0:13): reserved for root: 2416947 bytes (2360 KiB)
May  5 07:05:09 kernel: UBIFS (ubi0:13): media format: w5/r0 (latest is w5/r0), UUID 94B82B6B-B608-4B7C-B965-2FB37AA12F49, small LPT model
May  5 07:05:09 crashlog: <6>       0000000080160000  ffffff80080a0000  0000e000
May  5 07:05:09 kernel: wlcsm: module license 'Proprietary' taints kernel.
May  5 07:05:09 kernel: Disabling lock debugging due to kernel taint
May  5 07:05:09 kernel: Initializing WLCSM Module
May  5 07:05:09 crashlog: <6>       0000000080140000  ffffff8008038000  00004000
May  5 07:05:09 kernel: WLCSM Module loaded successfully
May  5 07:05:09 kernel: mtdoops: Attached to MTD device 3
May  5 07:05:09 kernel: BCMLIBS loaded...
May  5 07:05:09 crashlog: <6>       0000000082890000  ffffff80080b0000  0000ac00
May  5 07:05:09 kernel: ^[[0;36;44mBroadcom MPM Driver Intializing^[[0m
May  5 07:05:09 kernel: MPM: virt_base = 0xffffff800b052000, phy_base = 0x35000000, total_mem_size = 134217728
May  5 07:05:09 kernel: MPM: ebuf_size = 512, ebuf_total = 262144/262144
May  5 07:05:09 kernel: Pool[0]: alloc 1 EBUFs (512 bytes)
May  5 07:05:09 crashlog: <6>       0000000082000000  ffffff8009000000  00caf004
May  5 07:05:09 kernel: Pool[1]: alloc 2 EBUFs (1024 bytes)
May  5 07:05:09 kernel: Pool[2]: alloc 4 EBUFs (2048 bytes)
May  5 07:05:09 kernel: Pool[3]: alloc 8 EBUFs (4096 bytes)
May  5 07:05:09 kernel: MPM Pool Numbers: SKB = 0, Data = 3, DQM = 2
May  5 07:05:09 crashlog: <6>       0000000083400000  ffffff800a000000  00400000
May  5 07:05:09 kernel: MPM Total Commands = 41/64
May  5 07:05:09 kernel: MPM: ebuf_size 1, mpm_size_log2_kb 8
May  5 07:05:09 kernel: MPM Enabled
May  5 07:05:09 kernel: ^[[0;36;44mBroadcom HW Memory Pool Manager (MPM) Char Driver v0.1 Registered <342>^[[0m
May  5 07:05:09 crashlog: <6>       0000000080008000  ffffff8008084000  00004000
May  5 07:05:09 kernel: Broadcom BPM Module Char Driver v0.1 Registered<304>^[[0m
May  5 07:05:09 kernel: Scratch pad is not initialized.
May  5 07:05:09 kernel: Scratch pad is not initialized.
May  5 07:05:09 kernel: Scratch pad is not initialized.
May  5 07:05:09 crashlog: <6>       00000000800c0000  ffffff80080c0000  0000ffff
May  5 07:05:09 kernel: Scratch pad is not initialized.
May  5 07:05:09 kernel: Scratch pad is not initialized.
May  5 07:05:09 kernel: Scratch pad is not initialized.
May  5 07:05:09 crashlog: <6>       0000000081060000  ffffff800808c000  00003000
May  5 07:05:09 kernel: ^[[0;34m[NTC bpm] bpm_init_buf_pool: buf_top_idx:11184^[[0m
May  5 07:05:09 kernel: ^[[0;34m[NTC bpm] bpm_init_skb_pool: skbs pool inited total 11184^[[0m
May  5 07:05:09 kernel: Broadcom 802.1Q VLAN Interface, v0.1
May  5 07:05:09 kernel: Scratch pad is not initialized.
May  5 07:05:09 crashlog: <6>       0000000083800000  ffffff800a800000  00450000
May  5 07:05:09 kernel: rdpa_get_init_system_dt_params: emac_map=3f ext_sw_pid=30 wan_emac=12 usxgmiim_cnt=0
May  5 07:05:09 kernel: Scratch pad is not initialized.
May  5 07:05:09 kernel: mpm_alloc_ring_alloc: Host 0xffffffc03277a000 (0xffffffc03277a000), Phys 0x3277a000 (0x3277a000), Size 128 (192) bytes
May  5 07:05:09 kernel: mpm_alloc_ring_alloc: alloc_ring 0, buf_mode FKB (0), buf_type 0
May  5 07:05:09 crashlog: <6>       0000000080130000  ffffff80080d4000  00004000
May  5 07:05:09 kernel: mpm_free_ring_alloc: Host 0xffffffc031984000 (0xffffffc031984000), Phys 0x31984000 (0x31984000), Size 128 (192) bytes
May  5 07:05:09 kernel: mpm_free_ring_alloc: free_ring 0
May  5 07:05:09 kernel: Creating CPU ring for queue number 17 with 32768 packets descriptor=0xffffff8000d47540, size_of_entry 8
May  5 07:05:09 kernel: Done initializing Ring 17 Base=0xffffffc02f280000 num of entries= 32768 RDD Base=2f280000 descriptor=0xffffff8000d47540
May  5 07:05:09 crashlog: <6>       00000000837f0000  ffffff80080e0000  00008000
May  5 07:05:09 kernel: Creating CPU ring for queue number 18 with 16384 packets descriptor=0xffffff8000d475c0, size_of_entry 8
May  5 07:05:09 kernel: Done initializing Ring 18 Base=0xffffffc02d840000 num of entries= 16384 RDD Base=2d840000 descriptor=0xffffff8000d475c0
May  5 07:05:09 kernel: Creating CPU ring for queue number 16 with 32768 packets descriptor=0xffffff8000d474c0, size_of_entry 8
May  5 07:05:09 crashlog: <6>       00000000828b2000  ffffff800803d000  00001000
May  5 07:05:09 kernel: Done initializing Ring 16 Base=0xffffffc02f300000 num of entries= 32768 RDD Base=2f300000 descriptor=0xffffff8000d474c0
May  5 07:05:09 kernel: Creating CPU ring for queue number 19 with 2048 packets descriptor=0xffffff8000d47640, size_of_entry 16
May  5 07:05:09 kernel: Done initializing Ring 19 Base=0xffffffc02a300000 num of entries= 2048 RDD Base=2a300000 descriptor=0xffffff8000d47640
May  5 07:05:09 kernel: Creating CPU ring for queue number 20 with 2048 packets descriptor=0xffffff8000d476c0, size_of_entry 16
May  5 07:05:09 crashlog: <6>       0000000081100000  ffffff8008d00000  00091000
May  5 07:05:09 kernel: Done initializing Ring 20 Base=0xffffffc02a310000 num of entries= 2048 RDD Base=2a310000 descriptor=0xffffff8000d476c0
May  5 07:05:09 kernel: License chip name: 4912 serial number: 000000000000000000000000
May  5 07:05:09 crashlog: <6>       0000000080020000  ffffff80080ec000  00004000
May  5 07:05:09 kernel: brcmchipinfo: brcm_chipinfo_init entry
May  5 07:05:09 kernel: Broadcom Ingress QoS Module  Char Driver v1.0 Registered<303>^[[0m
May  5 07:05:09 kernel: Broadcom Ingress QoS v1.0 initialized
May  5 07:05:09 crashlog: <6>       0000000083000000  ffffff8008081000  00001000
May  5 07:05:09 kernel: ^[[0;36;44mBroadcom Packet Flow Cache ^[[0m
May  5 07:05:09 kernel: FCACHE_CONFIG_MAX_UCAST_FLOW_ENTRIES<16384>
May  5 07:05:09 kernel: FCACHE_CONFIG_MAX_MCAST_GROUPS<128>
May  5 07:05:09 kernel: FCACHE_CONFIG_MAX_MCAST_CLIENTS_PER_GROUP<64>
May  5 07:05:09 crashlog: <6>       0000000083030000  ffffff80080f4000  00004000
May  5 07:05:09 kernel: FCACHE_CONFIG_MAX_MCAST_CLIENTS<1024>
May  5 07:05:09 kernel: FCACHE_CONFIG_MAX_FDB_ENTRIES<1024>
May  5 07:05:09 kernel: FCACHE_CONFIG_MAX_HOST_DEV_ENTRIES<64>
May  5 07:05:09 kernel: FCACHE_CONFIG_MAX_HOST_MAC_ENTRIES<32>
May  5 07:05:09 crashlog: <6>       0000000083038000  ffffff8008aa4000  00004000
May  5 07:05:09 kernel: npe_max_entries<35072>
May  5 07:05:09 kernel: Bind blog_notify_evt_enqueue_fn[<ffffff8000ec9af0>]
May  5 07:05:09 kernel: fc_evt task created successfully
May  5 07:05:09 kernel: max_ent = 17536 intvl_msec = 10000 num_slices = 2000 num_ent = 9 period_msec = 5
May  5 07:05:09 crashlog: <6>       0000000083040000  ffffff8008aac000  00004000
May  5 07:05:09 kernel: NBUFF v1.0 Initialized
May  5 07:05:09 kernel: fcache: mcast_max_groups<128> mcast_max_clients_per_group<64> mcast_max_clients<1024>
May  5 07:05:09 kernel: fcache: mcast_max_ent<1152>
May  5 07:05:09 kernel: fcache: ucast_max_ent<16384>
May  5 07:05:09 crashlog: <6>       0000000083048000  ffffff8008ab4000  00004000
May  5 07:05:09 kernel: fcache: max_ent<17536>
May  5 07:05:09 kernel: ^[[0;36;44mTotal # of labels = 77^[[0m
May  5 07:05:09 kernel: ^[[0;36;44mInitialized fcache state^[[0m
May  5 07:05:09 crashlog: <6>       0000000083020000  ffffff8008abc000  00004000
May  5 07:05:09 kernel:     Pkt HW acceleration is disabled/unavailable.
May  5 07:05:09 kernel: ^[[0;36;44mBroadcom Packet Flow Cache  Char Driver v4.0 Registered<302>^[[0m
May  5 07:05:09 kernel: fc_timer_task created successfully
May  5 07:05:09 kernel:     Pkt HW acceleration is disabled/unavailable.
May  5 07:05:09 crashlog: <6>       0000000083010000  ffffff8008ac4000  00004000
May  5 07:05:09 kernel: Created Proc FS /procfs/fcache
May  5 07:05:09 kernel: ^[[0;36;44mBroadcom Packet Flow Cache registered with netdev chain^[[0m
May  5 07:05:09 kernel: ^[[0;36;44mBroadcom Packet Flow Cache learning via BLOG enabled.^[[0m
May  5 07:05:09 kernel: ^[[0;35m[FHW]  pktDbgLvl[0x0000000078ae18c6]=0^[[0m
May  5 07:05:09 crashlog: <6>       0000000083018000  ffffff8008acc000  00004000
May  5 07:05:09 kernel: ^[[0;34m[FHW]  fhw_construct: ^[[0m
May  5 07:05:09 kernel: ^[[0;36;44mInitialized Fcache HW accelerator layer state^[[0m
May  5 07:05:09 kernel: flwStatsThread created. numFlwsPerPoll 584 maxFlwIdx 17535
May  5 07:05:09 kernel: ^[[0;36;44mFcache Pathstats created^[[0m
May  5 07:05:09 crashlog: <6>       0000000083058000  ffffff8008ad4000  00004000
May  5 07:05:09 kernel: ^[[0;36;44mConstructed Broadcom Packet Flow Cache v4.0^[[0m
May  5 07:05:09 kernel: Broadcom Command List Driver v1.0
May  5 07:05:09 kernel: bcmenet DT
May  5 07:05:09 kernel: Registered mac device: UNIMAC:0x0
May  5 07:05:09 crashlog: <6>       0000000083060000  ffffff8008adc000  00004000
May  5 07:05:09 kernel: bca_led_request_network_leds:L748 network led 1 for port 0 link 0x7 activity 0x7
May  5 07:05:09 kernel: Registered mac device: UNIMAC:0x1
May  5 07:05:09 kernel: bca_led_request_network_leds:L748 network led 1 for port 1 link 0x7 activity 0x7
May  5 07:05:09 crashlog: <6>       0000000083070000  ffffff8008ae4000  00004000
May  5 07:05:09 kernel: Registered mac device: UNIMAC:0x2
May  5 07:05:09 kernel: bca_led_request_network_leds:L748 network led 1 for port 2 link 0x7 activity 0x7
May  5 07:05:09 kernel: Registered mac device: UNIMAC:0x3
May  5 07:05:09 kernel: bca_led_request_network_leds:L748 network led 1 for port 3 link 0x7 activity 0x7
May  5 07:05:09 crashlog: <6>       0000000083078000  ffffff8008aec000  00004000
May  5 07:05:09 kernel: Registered mac device: UNIMAC:0x4
May  5 07:05:09 kernel: set RGMII pad ctrl for GPIO 42 to 0x00006000
May  5 07:05:09 kernel: set RGMII pad ctrl for GPIO 43 to 0x00006000
May  5 07:05:09 kernel: set RGMII pad ctrl for GPIO 44 to 0x00006000
May  5 07:05:09 crashlog: <6>       0000000083080000  ffffff8008af4000  00004000
May  5 07:05:09 kernel: set RGMII pad ctrl for GPIO 45 to 0x00006000
May  5 07:05:09 kernel: set RGMII pad ctrl for GPIO 46 to 0x00006000
May  5 07:05:09 kernel: set RGMII pad ctrl for GPIO 47 to 0x00006000
May  5 07:05:09 kernel: set RGMII pad ctrl for GPIO 48 to 0x00016000
May  5 07:05:09 crashlog: <6>       0000000083050000  ffffff8008c04000  00004000
May  5 07:05:09 kernel: set RGMII pad ctrl for GPIO 49 to 0x00016000
May  5 07:05:09 kernel: set RGMII pad ctrl for GPIO 50 to 0x00016000
May  5 07:05:09 kernel: set RGMII pad ctrl for GPIO 51 to 0x00016000
May  5 07:05:09 kernel: set RGMII pad ctrl for GPIO 52 to 0x00016000
May  5 07:05:09 crashlog: <6>       0000000083028000  ffffff8008c0c000  00004000
May  5 07:05:09 kernel: set RGMII pad ctrl for GPIO 53 to 0x00016000
May  5 07:05:09 kernel: bca_led_request_network_leds:L748 network led 1 for port 4 link 0x7 activity 0x7
May  5 07:05:09 kernel: ^[[0;34m[NTC xport] port_xport_dev_add: intf_type = 1 xport_port=0
May  5 07:05:09 kernel: ^[[0m
May  5 07:05:09 crashlog: <6>       0000000083088000  ffffff8008c14000  00004000
May  5 07:05:09 kernel: Registered mac device: XPORT:0x5
May  5 07:05:09 kernel: bca_led_request_network_leds:L748 network led 2 for port 5 link 0xe activity 0xe
May  5 07:05:09 crashlog: <6>       00000000810a0000  ffffff8008089000  00001000
May  5 07:05:09 kernel: ^[[0;30;102mProbing Copper PHYs located at bus:^[[0m
May  5 07:05:09 kernel:     Detected Copper PHY at address  1 with PHY ID 0x3590.0x5230: EGPHY
May  5 07:05:09 kernel:     Detected Copper PHY at address  2 with PHY ID 0x3590.0x5230: EGPHY
May  5 07:05:09 kernel:     Detected Copper PHY at address  3 with PHY ID 0x3590.0x5230: EGPHY
May  5 07:05:09 crashlog: <6>       0000000083090000  ffffff800809a000  00000400
May  5 07:05:09 kernel:     Detected Copper PHY at address  4 with PHY ID 0x3590.0x5230: EGPHY
May  5 07:05:09 kernel:     Detected Copper PHY at address 17 with PHY ID 0x3590.0x51cd: 4912M
May  5 07:05:09 kernel:     Detected Copper PHY at address 25 with PHY ID 0x600d.0x84a6: EGPHY
May  5 07:05:09 kernel: Detecting PHYs...
May  5 07:05:09 crashlog: <6>       0000000083094000  ffffff800809c000  00000400
May  5 07:05:09 kernel: 4912M       3590:51cd --> 0x11
May  5 07:05:09 kernel: Loading firmware into detected PHYs: map=0x20000 count=1
May  5 07:05:09 kernel: Halt the PHYs processors operation
May  5 07:05:09 kernel: Upload the firmware into the on-chip memory: file=/rom/etc/fw/longfin_a0_firmware.bin size=294708
May  5 07:05:09 crashlog: <6>Calibrating delay loop (skipped), value calculated using timer frequency.. 100.00 BogoMIPS (lpj=50000)
May  5 07:05:09 kernel: 0%^[[1A
May  5 07:05:09 kernel: 0%^[[1A
May  5 07:05:09 kernel: 1%^[[1A
May  5 07:05:09 kernel: 1%^[[1A
May  5 07:05:09 crashlog: <6>pid_max: default: 32768 minimum: 301
May  5 07:05:09 kernel: 1%^[[1A
May  5 07:05:09 kernel: 2%^[[1A
May  5 07:05:09 kernel: 2%^[[1A
May  5 07:05:09 kernel: 2%^[[1A
May  5 07:05:09 crashlog: <6>Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
May  5 07:05:09 kernel: 3%^[[1A
May  5 07:05:09 kernel: 3%^[[1A
May  5 07:05:09 kernel: 3%^[[1A
May  5 07:05:09 kernel: 4%^[[1A
May  5 07:05:09 crashlog: <6>Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes)
May  5 07:05:09 kernel: 4%^[[1A
May  5 07:05:09 crashlog: <6>ASID allocator initialised with 32768 entries
May  5 07:05:09 kernel: 4%^[[1A
May  5 07:05:09 kernel: 5%^[[1A
May  5 07:05:09 crashlog: <6>rcu: Hierarchical SRCU implementation.
May  5 07:05:09 kernel: 5%^[[1A
May  5 07:05:09 kernel: 5%^[[1A
May  5 07:05:09 kernel: 6%^[[1A
May  5 07:05:09 kernel: 6%^[[1A
May  5 07:05:09 crashlog: <4>mtusize 1500
May  5 07:05:09 kernel: 6%^[[1A
May  5 07:05:09 kernel: 7%^[[1A
May  5 07:05:09 kernel: 7%^[[1A
May  5 07:05:09 kernel: 7%^[[1A
May  5 07:05:09 crashlog: <4>CCI hardware cache coherency enabled
May  5 07:05:09 kernel: 8%^[[1A
May  5 07:05:09 kernel: 8%^[[1A
May  5 07:05:09 kernel: 9%^[[1A
May  5 07:05:09 kernel: 9%^[[1A
May  5 07:05:09 crashlog: <4>bootloader version  U-Boot 2019.07 (Dec 21 2023 - 16:42:11 -0500), Build: 5.04L.0
May  5 07:05:09 kernel: 9%^[[1A
May  5 07:05:09 kernel: 10%^[[1A
May  5 07:05:09 kernel: 10%^[[1A
May  5 07:05:09 kernel: 10%^[[1A
May  5 07:05:09 crashlog: <4>
May  5 07:05:09 kernel: 11%^[[1A
May  5 07:05:09 kernel: 11%^[[1A
May  5 07:05:09 kernel: 11%^[[1A
May  5 07:05:09 kernel: 12%^[[1A
May  5 07:05:09 crashlog: <4>
May  5 07:05:09 kernel: 12%^[[1A
May  5 07:05:09 kernel: 12%^[[1A
May  5 07:05:09 kernel: 13%^[[1A
May  5 07:05:09 kernel: 13%^[[1A
May  5 07:05:09 crashlog: <4>inMemNvramData.szBoardId RTAX86U_PRO
May  5 07:05:09 kernel: 13%^[[1A
May  5 07:05:09 kernel: 14%^[[1A
May  5 07:05:09 kernel: 14%^[[1A
May  5 07:05:09 kernel: 14%^[[1A
May  5 07:05:09 kernel: 15%^[[1A
May  5 07:05:09 crashlog: <6>smp: Bringing up secondary CPUs ...
May  5 07:05:09 kernel: 15%^[[1A
May  5 07:05:09 kernel: 15%^[[1A
May  5 07:05:09 kernel: 16%^[[1A
May  5 07:05:09 kernel: 16%^[[1A
May  5 07:05:09 crashlog: <6>Detected VIPT I-cache on CPU1
May  5 07:05:09 kernel: 17%^[[1A
May  5 07:05:09 kernel: 17%^[[1A
May  5 07:05:09 kernel: 17%^[[1A
May  5 07:05:09 kernel: 18%^[[1A
May  5 07:05:09 crashlog: <6>CPU1: Booted secondary processor 0x0000000001 [0x420f1000]
May  5 07:05:09 kernel: 18%^[[1A
May  5 07:05:09 kernel: 18%^[[1A
May  5 07:05:09 kernel: 19%^[[1A
May  5 07:05:09 crashlog: <6>Detected VIPT I-cache on CPU2
May  5 07:05:09 kernel: 19%^[[1A
May  5 07:05:09 kernel: 19%^[[1A
May  5 07:05:09 kernel: 20%^[[1A
May  5 07:05:09 kernel: 20%^[[1A
May  5 07:05:09 crashlog: <6>CPU2: Booted secondary processor 0x0000000002 [0x420f1000]
May  5 07:05:09 kernel: 20%^[[1A
May  5 07:05:09 kernel: 21%^[[1A
May  5 07:05:09 kernel: 21%^[[1A
May  5 07:05:09 kernel: 21%^[[1A
May  5 07:05:09 kernel: 22%^[[1A
May  5 07:05:09 crashlog: <6>Detected VIPT I-cache on CPU3
May  5 07:05:09 kernel: 22%^[[1A
May  5 07:05:09 kernel: 22%^[[1A
May  5 07:05:09 kernel: 23%^[[1A
May  5 07:05:09 kernel: 23%^[[1A
May  5 07:05:09 crashlog: <6>CPU3: Booted secondary processor 0x0000000003 [0x420f1000]
May  5 07:05:09 kernel: 23%^[[1A
May  5 07:05:09 kernel: 24%^[[1A
May  5 07:05:09 kernel: 24%^[[1A
May  5 07:05:09 kernel: 25%^[[1A
May  5 07:05:09 crashlog: <6>smp: Brought up 1 node, 4 CPUs
May  5 07:05:09 kernel: 25%^[[1A
May  5 07:05:09 kernel: 25%^[[1A
May  5 07:05:09 kernel: 26%^[[1A
May  5 07:05:09 kernel: 26%^[[1A
May  5 07:05:09 crashlog: <6>SMP: Total of 4 processors activated.
May  5 07:05:09 kernel: 26%^[[1A
May  5 07:05:09 kernel: 27%^[[1A
May  5 07:05:09 kernel: 27%^[[1A
May  5 07:05:09 kernel: 27%^[[1A
May  5 07:05:09 crashlog: <6>CPU features: detected: 32-bit EL0 Support
May  5 07:05:09 kernel: 28%^[[1A
May  5 07:05:09 kernel: 28%^[[1A
May  5 07:05:09 kernel: 28%^[[1A
May  5 07:05:09 kernel: 29%^[[1A
May  5 07:05:09 crashlog: <6>CPU: All CPU(s) started at EL2
May  5 07:05:09 kernel: 29%^[[1A
May  5 07:05:09 kernel: 29%^[[1A
May  5 07:05:09 kernel: 30%^[[1A
May  5 07:05:09 crashlog: <6>alternatives: patching kernel code
May  5 07:05:09 kernel: 30%^[[1A
May  5 07:05:09 kernel: 30%^[[1A
May  5 07:05:09 kernel: 31%^[[1A
May  5 07:05:09 kernel: 31%^[[1A
May  5 07:05:09 kernel: 31%^[[1A
May  5 07:05:09 crashlog: <6>devtmpfs: initialized
May  5 07:05:09 kernel: 32%^[[1A
May  5 07:05:09 kernel: 32%^[[1A
May  5 07:05:09 kernel: 33%^[[1A
May  5 07:05:09 kernel: 33%^[[1A
May  5 07:05:09 crashlog: <6>clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
May  5 07:05:09 kernel: 33%^[[1A
May  5 07:05:09 kernel: 34%^[[1A
May  5 07:05:09 kernel: 34%^[[1A
May  5 07:05:09 kernel: 34%^[[1A
May  5 07:05:09 crashlog: <6>futex hash table entries: 1024 (order: 4, 65536 bytes)
May  5 07:05:09 kernel: 35%^[[1A
May  5 07:05:09 kernel: 35%^[[1A
May  5 07:05:09 kernel: 35%^[[1A
May  5 07:05:09 kernel: 36%^[[1A
May  5 07:05:09 crashlog: <6>pinctrl core: initialized pinctrl subsystem
May  5 07:05:09 kernel: 36%^[[1A
May  5 07:05:09 kernel: 36%^[[1A
May  5 07:05:09 kernel: 37%^[[1A
May  5 07:05:09 crashlog: <4>size of sk_buff 512
May  5 07:05:09 kernel: 37%^[[1A
May  5 07:05:09 kernel: 37%^[[1A
May  5 07:05:09 kernel: 38%^[[1A
May  5 07:05:09 kernel: 38%^[[1A
May  5 07:05:09 crashlog: <4>offset of cb in sk_buff 368
May  5 07:05:09 kernel: 38%^[[1A
May  5 07:05:09 kernel: 39%^[[1A
May  5 07:05:09 kernel: 39%^[[1A
May  5 07:05:09 kernel: 39%^[[1A
May  5 07:05:09 crashlog: <6>NET: Registered protocol family 16
May  5 07:05:09 kernel: 40%^[[1A
May  5 07:05:09 kernel: 40%^[[1A
May  5 07:05:09 kernel: 41%^[[1A
May  5 07:05:09 kernel: 41%^[[1A
May  5 07:05:09 crashlog: <6>cpuidle: using governor menu
May  5 07:05:09 kernel: 41%^[[1A
May  5 07:05:09 kernel: 42%^[[1A
May  5 07:05:09 kernel: 42%^[[1A
May  5 07:05:09 kernel: 42%^[[1A
May  5 07:05:09 crashlog: <4>PMC driver initcall
May  5 07:05:09 kernel: 43%^[[1A
May  5 07:05:09 kernel: 43%^[[1A
May  5 07:05:09 kernel: 43%^[[1A
May  5 07:05:09 kernel: 44%^[[1A
May  5 07:05:09 crashlog: <4>PMC driver scanning DT
May  5 07:05:09 kernel: 44%^[[1A
May  5 07:05:09 kernel: 44%^[[1A
May  5 07:05:09 kernel: 45%^[[1A
May  5 07:05:09 kernel: 45%^[[1A
May  5 07:05:09 crashlog: <4>pmc match PMC brcm,bca-pmc-3-2
May  5 07:05:09 kernel: 45%^[[1A
May  5 07:05:09 kernel: 46%^[[1A
May  5 07:05:09 kernel: 46%^[[1A
May  5 07:05:09 kernel: 46%^[[1A
May  5 07:05:09 crashlog: <4>     Remapping PMC IO memories...
May  5 07:05:09 kernel: 47%^[[1A
May  5 07:05:09 kernel: 47%^[[1A
May  5 07:05:09 kernel: 47%^[[1A
May  5 07:05:09 kernel: 48%^[[1A
May  5 07:05:09 crashlog: <4>             phys              virt          size
May  5 07:05:09 kernel: 48%^[[1A
May  5 07:05:09 kernel: 48%^[[1A
May  5 07:05:09 kernel: 49%^[[1A
May  5 07:05:09 kernel: 49%^[[1A
May  5 07:05:09 kernel: 50%^[[1A
May  5 07:05:09 crashlog: <4>     0x00000000ffb01018 0xffffff8008dd0018 0x00005080
May  5 07:05:09 kernel: 50%^[[1A
May  5 07:05:09 kernel: 50%^[[1A
May  5 07:05:09 kernel: 51%^[[1A
May  5 07:05:09 kernel: 51%^[[1A
May  5 07:05:09 crashlog: <4>     0x00000000ffb20000 0xffffff800809e000 0x00000240
May  5 07:05:09 kernel: 51%^[[1A
May  5 07:05:09 kernel: 52%^[[1A
May  5 07:05:09 kernel: 52%^[[1A
May  5 07:05:09 kernel: 52%^[[1A
May  5 07:05:09 crashlog: <4>     0x00000000ffb00400 0xffffff80080bc400 0x000005d0
May  5 07:05:09 kernel: 53%^[[1A
May  5 07:05:09 kernel: 53%^[[1A
May  5 07:05:09 kernel: 53%^[[1A
May  5 07:05:09 kernel: 54%^[[1A
May  5 07:05:09 crashlog: <4>     0x00000000ffb80000 0xffffff80080be000 0x00001000
May  5 07:05:09 kernel: 54%^[[1A
May  5 07:05:09 kernel: 54%^[[1A
May  5 07:05:09 kernel: 55%^[[1A
May  5 07:05:09 kernel: 55%^[[1A
May  5 07:05:09 crashlog: <4>pmc_init:PMC using DQM mode
May  5 07:05:09 kernel: 55%^[[1A
May  5 07:05:09 kernel: 56%^[[1A
May  5 07:05:09 kernel: 56%^[[1A
May  5 07:05:09 kernel: 56%^[[1A
May  5 07:05:09 crashlog: <6>DMA: preallocated 4096 KiB pool for atomic allocations
May  5 07:05:09 kernel: 57%^[[1A
May  5 07:05:09 kernel: 57%^[[1A
May  5 07:05:09 kernel: 58%^[[1A
May  5 07:05:09 kernel: 58%^[[1A
May  5 07:05:09 crashlog: <6>Serial: AMBA PL011 UART driver
May  5 07:05:09 kernel: 58%^[[1A
May  5 07:05:09 kernel: 59%^[[1A
May  5 07:05:09 kernel: 59%^[[1A
May  5 07:05:09 kernel: 59%^[[1A
May  5 07:05:09 crashlog: <4>Powering on XRDP core...
May  5 07:05:09 kernel: 60%^[[1A
May  5 07:05:09 kernel: 60%^[[1A
May  5 07:05:09 kernel: 60%^[[1A
May  5 07:05:09 kernel: 61%^[[1A
May  5 07:05:09 crashlog: <4>Toggle reset of XRDP core...
May  5 07:05:09 kernel: 61%^[[1A
May  5 07:05:09 kernel: 61%^[[1A
May  5 07:05:09 kernel: 62%^[[1A
May  5 07:05:09 kernel: 62%^[[1A
May  5 07:05:09 crashlog: <6>bcm_rsvmem plat_rsvmem_cached_device: assigned reserved memory node dt_reserved_cma
May  5 07:05:09 kernel: 62%^[[1A
May  5 07:05:09 kernel: 63%^[[1A
May  5 07:05:09 kernel: 63%^[[1A
May  5 07:05:09 kernel: 63%^[[1A
May  5 07:05:09 crashlog: <6>bcm_rsvmem plat_rsvmem_uncached_device: assigned reserved memory node dt_reserved_cma
May  5 07:05:09 kernel: 64%^[[1A
May  5 07:05:09 kernel: 64%^[[1A
May  5 07:05:09 kernel: 64%^[[1A
May  5 07:05:09 kernel: 65%^[[1A
May  5 07:05:09 kernel: 65%^[[1A
May  5 07:05:09 crashlog: <6>reserved CMA memory bufmem virt addr ffffff800b052000 phys addr 0x0000000035000000 size 0x8000000 cached=0
May  5 07:05:09 kernel: 66%^[[1A
May  5 07:05:09 kernel: 66%^[[1A
May  5 07:05:09 kernel: 66%^[[1A
May  5 07:05:09 kernel: 67%^[[1A
May  5 07:05:09 crashlog: <6>reserved CMA memory rnrmem virt addr ffffff8013053000 phys addr 0x000000003d000000 size 0xc00000 cached=0
May  5 07:05:09 kernel: 67%^[[1A
May  5 07:05:09 kernel: 67%^[[1A
May  5 07:05:09 kernel: 68%^[[1A
May  5 07:05:09 kernel: 68%^[[1A
May  5 07:05:09 crashlog: <6>reserved CMA memory dhd0 virt addr ffffff8013c54000 phys addr 0x000000003dc00000 size 0xb00000 cached=0
May  5 07:05:09 kernel: 68%^[[1A
May  5 07:05:09 kernel: 69%^[[1A
May  5 07:05:09 kernel: 69%^[[1A
May  5 07:05:09 crashlog: <6>reserved CMA memory dhd1 virt addr ffffff8014755000 phys addr 0x000000003e700000 size 0xb00000 cached=0
May  5 07:05:09 kernel: 69%^[[1A
May  5 07:05:09 crashlog: <6>reserved CMA memory dhd2 virt addr ffffff8015256000 phys addr 0x000000003f200000 size 0xb00000 cached=0
May  5 07:05:09 kernel: 70%^[[1A
May  5 07:05:09 kernel: 70%^[[1A
May  5 07:05:09 kernel: 70%^[[1A
May  5 07:05:09 kernel: 71%^[[1A
May  5 07:05:09 crashlog: <6>bcm-bca-gpio ff800500.gpioc: Setting up BCA GPIO
May  5 07:05:09 kernel: 71%^[[1A
May  5 07:05:09 kernel: 71%^[[1A
May  5 07:05:09 kernel: 72%^[[1A
May  5 07:05:09 kernel: 72%^[[1A
May  5 07:05:09 kernel: 72%^[[1A
May  5 07:05:09 crashlog: <6>bca_extintr ff800004.bca_extintr0: Ext_Int_0 HWIrq 79 virq 57
May  5 07:05:09 kernel: 73%^[[1A
May  5 07:05:09 kernel: 73%^[[1A
May  5 07:05:09 kernel: 74%^[[1A
May  5 07:05:09 kernel: 74%^[[1A
May  5 07:05:09 crashlog: <6>bca_extintr ff800004.bca_extintr0: Ext_Int_1 HWIrq 80 virq 58
May  5 07:05:09 kernel: 74%^[[1A
May  5 07:05:09 kernel: 75%^[[1A
May  5 07:05:09 kernel: 75%^[[1A
May  5 07:05:09 kernel: 75%^[[1A
May  5 07:05:09 crashlog: <6>bca_extintr ff800004.bca_extintr0: Ext_Int_2 HWIrq 81 virq 59
May  5 07:05:09 kernel: 76%^[[1A
May  5 07:05:09 kernel: 76%^[[1A
May  5 07:05:09 kernel: 76%^[[1A
May  5 07:05:09 kernel: 77%^[[1A
May  5 07:05:09 crashlog: <6>bca_extintr ff800004.bca_extintr0: Ext_Int_3 HWIrq 82 virq 60
May  5 07:05:09 kernel: 77%^[[1A
May  5 07:05:09 kernel: 77%^[[1A
May  5 07:05:09 kernel: 78%^[[1A
May  5 07:05:09 kernel: 78%^[[1A
May  5 07:05:09 crashlog: <6>bca_extintr ff800004.bca_extintr0: Ext_Int_4 HWIrq 83 virq 61
May  5 07:05:09 kernel: 78%^[[1A
May  5 07:05:09 kernel: 79%^[[1A
May  5 07:05:09 kernel: 79%^[[1A
May  5 07:05:09 kernel: 79%^[[1A
May  5 07:05:09 crashlog: <6>bca_extintr ff800004.bca_extintr0: Ext_Int_5 HWIrq 84 virq 62
May  5 07:05:09 kernel: 80%^[[1A
May  5 07:05:09 kernel: 80%^[[1A
May  5 07:05:09 kernel: 80%^[[1A
May  5 07:05:09 kernel: 81%^[[1A
May  5 07:05:09 crashlog: <6>bca_extintr ff800004.bca_extintr0: Ext_Int_6 HWIrq 85 virq 63
May  5 07:05:09 kernel: 81%^[[1A
May  5 07:05:09 kernel: 82%^[[1A
May  5 07:05:09 kernel: 82%^[[1A
May  5 07:05:09 kernel: 82%^[[1A
May  5 07:05:09 crashlog: <6>bca_extintr ff800004.bca_extintr0: Ext_Int_7 HWIrq 86 virq 64
May  5 07:05:09 kernel: 83%^[[1A
May  5 07:05:09 kernel: 83%^[[1A
May  5 07:05:09 kernel: 83%^[[1A
May  5 07:05:09 kernel: 84%^[[1A
May  5 07:05:09 crashlog: <6>bca_extintr ff800004.bca_extintr0: Readed resouce bca_extintr0 start 0xff800004 end 0xff80004b
May  5 07:05:09 kernel: 84%^[[1A
May  5 07:05:09 kernel: 84%^[[1A
May  5 07:05:09 kernel: 85%^[[1A
May  5 07:05:09 kernel: 85%^[[1A
May  5 07:05:09 crashlog: <6>ff812000.serial0: ttyAMA0 at MMIO 0xff812000 (irq = 65, base_baud = 0) is a PL011 rev3
May  5 07:05:09 kernel: 85%^[[1A
May  5 07:05:09 kernel: 86%^[[1A
May  5 07:05:09 kernel: 86%^[[1A
May  5 07:05:09 kernel: 86%^[[1A
May  5 07:05:09 crashlog: <6>console [ttyAMA0] enabled
May  5 07:05:09 kernel: 87%^[[1A
May  5 07:05:09 kernel: 87%^[[1A
May  5 07:05:09 kernel: 87%^[[1A
May  5 07:05:09 kernel: 88%^[[1A
May  5 07:05:09 kernel: 88%^[[1A
May  5 07:05:09 crashlog: <6>bootconsole [pl11] disabled
May  5 07:05:09 kernel: 88%^[[1A
May  5 07:05:09 kernel: 89%^[[1A
May  5 07:05:09 kernel: 89%^[[1A
May  5 07:05:09 kernel: 89%^[[1A
May  5 07:05:09 crashlog: <6>bcm-bca-cled-ctrl ff803000.led_ctrl: max supported leds 64[64]
May  5 07:05:09 kernel: 90%^[[1A
May  5 07:05:09 kernel: 90%^[[1A
May  5 07:05:09 kernel: 91%^[[1A
May  5 07:05:09 kernel: 91%^[[1A
May  5 07:05:09 crashlog: <6>bcm-bca-cled-ctrl ff803000.led_ctrl:  Parallel CLED interface found
May  5 07:05:09 kernel: 91%^[[1A
May  5 07:05:09 kernel: 92%^[[1A
May  5 07:05:09 kernel: 92%^[[1A
May  5 07:05:09 kernel: 92%^[[1A
May  5 07:05:09 crashlog: <6>cryptd: max_cpu_qlen set to 1000
May  5 07:05:09 kernel: 93%^[[1A
May  5 07:05:09 kernel: 93%^[[1A
May  5 07:05:09 kernel: 93%^[[1A
May  5 07:05:09 kernel: 94%^[[1A
May  5 07:05:09 crashlog: <4>map_hw_timer_interrupt,162: interrupt_id 66
May  5 07:05:09 kernel: 94%^[[1A
May  5 07:05:09 kernel: 94%^[[1A
May  5 07:05:09 kernel: 95%^[[1A
May  5 07:05:09 kernel: 95%^[[1A
May  5 07:05:09 crashlog: <4>map_hw_timer_interrupt,162: interrupt_id 67
May  5 07:05:09 kernel: 95%^[[1A
May  5 07:05:09 kernel: 96%^[[1A
May  5 07:05:09 kernel: 96%^[[1A
May  5 07:05:09 kernel: 96%^[[1A
May  5 07:05:09 crashlog: <4>map_hw_timer_interrupt,162: interrupt_id 68
May  5 07:05:09 kernel: 97%^[[1A
May  5 07:05:09 kernel: 97%^[[1A
May  5 07:05:09 kernel: 97%^[[1A
May  5 07:05:09 kernel: 98%^[[1A
May  5 07:05:09 crashlog: <4>map_hw_timer_interrupt,162: interrupt_id 69
May  5 07:05:09 kernel: 98%^[[1A
May  5 07:05:09 kernel: 99%^[[1A
May  5 07:05:09 kernel: 99%^[[1A
May  5 07:05:09 kernel: 99%^[[1A
May  5 07:05:09 crashlog: <6>bcm-bca-leds ff803000.led_ctrl:parallel-port_0-led_1: HW led 19 registered
May  5 07:05:09 kernel: 100%^[[1A
May  5 07:05:09 kernel: Reset the processors to start execution of the code in the on-chip memory
May  5 07:05:09 kernel: Verify that the processors are running: OK
May  5 07:05:09 crashlog: <6>bcm-bca-leds ff803000.led_ctrl:parallel-port_1-led_1: HW led 8 registered
May  5 07:05:09 kernel: Verify that the firmware has been loaded with good CRC: OK
May  5 07:05:09 kernel: Firmware loading completed successfully: v2.2.8
May  5 07:05:09 kernel: Adjusted QGPHY: qphy_ctrl=0x00041000 ext_pwr_down=0x0
May  5 07:05:09 kernel: ephy_leds_init SW 0 Port 0 led idx 0 configured as:
May  5 07:05:09 crashlog: <6>bcm-bca-leds ff803000.led_ctrl:parallel-port_2-led_1: HW led 7 registered
May  5 07:05:09 kernel: led ctrl 0x00000003 encode 0x0003fb6f encode sel 0x00000490
May  5 07:05:09 kernel: BCMENET: Enabling Software GSO for eth0
May  5 07:05:09 kernel: ephy_leds_init SW 0 Port 1 led idx 1 configured as:
May  5 07:05:09 kernel: led ctrl 0x00000003 encode 0x0003fb6f encode sel 0x00000490
May  5 07:05:09 crashlog: <6>bcm-bca-leds ff803000.led_ctrl:parallel-port_3-led_1: HW led 5 registered
May  5 07:05:09 kernel: BCMENET: Enabling Software GSO for eth1
May  5 07:05:09 kernel: ephy_leds_init SW 0 Port 2 led idx 2 configured as:
May  5 07:05:09 kernel: led ctrl 0x00000003 encode 0x0003fb6f encode sel 0x00000490
May  5 07:05:09 kernel: BCMENET: Enabling Software GSO for eth2
May  5 07:05:09 kernel: ephy_leds_init SW 0 Port 3 led idx 3 configured as:
May  5 07:05:09 kernel: led ctrl 0x00000003 encode 0x0003fb6f encode sel 0x00000490
May  5 07:05:09 kernel: BCMENET: Enabling Software GSO for eth3
May  5 07:05:09 crashlog: <6>bcm-bca-leds ff803000.led_ctrl:parallel-port_4-led_1: HW led 4 registered
May  5 07:05:09 kernel: ephy_leds_init SW 0 Port 4 led idx 4 configured as:
May  5 07:05:09 kernel: led ctrl 0x00000003 encode 0x0003fb6f encode sel 0x00000490
May  5 07:05:09 kernel: BCMENET: Enabling Software GSO for eth4
May  5 07:05:09 crashlog: <6>bcm-bca-leds ff803000.led_ctrl:parallel-port_5-led_2: HW led 17 registered
May  5 07:05:09 kernel: ^[[0;30;102m=== Start of 10G Active Ethernet Initialization for core 0 port 0 ===^[[0m
May  5 07:05:09 kernel: --- Step 0 powerup/reset sequence of core #0 at address 6
May  5 07:05:09 kernel: INFO MerlinSupport::_merlin_core_power_op(): START powering up Merlin Core #0 with PRTAD = 6, ln_offset_stap = 0
May  5 07:05:09 kernel: INFO MerlinSupport::_merlin_core_power_op(): Disable IDDQ
May  5 07:05:09 crashlog: <6>pinctrl-bcmbca ff800554.pinctrl: bcmbca_gpio_request called for GPIO 1
May  5 07:05:09 kernel: INFO MerlinSupport::_merlin_core_power_op(): Provide a delay of 1ms after IDDQ is de-asserted
May  5 07:05:09 kernel: INFO MerlinSupport::_merlin_core_power_op(): Disable serdes_reset and refclk_reset
May  5 07:05:09 kernel: INFO MerlinSupport::_merlin_core_power_op: assert IDDQ|RESET|REFCLK_RESET to power down Serdes
May  5 07:05:09 kernel: INFO MerlinSupport::_merlin_core_power_op(): START powering up Merlin Core #0 with PRTAD = 6, ln_offset_stap = 0
May  5 07:05:09 crashlog: <6>bcm-bca-leds ff803000.led_ctrl:led_gpio_1: SW led 1 registered
May  5 07:05:09 kernel: INFO MerlinSupport::_merlin_core_power_op(): Disable IDDQ
May  5 07:05:09 kernel: INFO MerlinSupport::_merlin_core_power_op(): Provide a delay of 1ms after IDDQ is de-asserted
May  5 07:05:09 kernel: INFO MerlinSupport::_merlin_core_power_op(): Disable serdes_reset and refclk_reset
May  5 07:05:09 crashlog: <6>pinctrl-bcmbca ff800554.pinctrl: bcmbca_gpio_request called for GPIO 15
May  5 07:05:09 kernel: Toggle Serdes Core #0 PMD and uC reset.
May  5 07:05:09 kernel: INFO MerlinSupport::merlin_core_init(): END. Core #0 with PRTAD = 6, ln_offset_stap = 0
May  5 07:05:09 kernel: MerlinSupport::merlin16_serdes_init(): Step 4. Assert micro reset
May  5 07:05:09 kernel: MerlinSupport::merlin16_serdes_init(): Step 6. Micro code load and verify
May  5 07:05:09 crashlog: <6>bcm-bca-leds ff803000.led_ctrl:led_gpio_15: SW led 15 registered
May  5 07:05:09 kernel: MerlinSupport::merlin_load_firmware(): INFO: Start to download firmware to core #   0
May  5 07:05:09 kernel: MerlinSupport::merlin_load_firmware():  Checking init_done initial value passed...
May  5 07:05:09 kernel: MerlinSupport::merlin_load_firmware():  INFO: wait 8192 comclks for ~32KB code ram initialization...
May  5 07:05:09 kernel: MerlinSupport::merlin_load_firmware():  Checking init_done passed ...
May  5 07:05:09 crashlog: <6>pinctrl-bcmbca ff800554.pinctrl: bcmbca_gpio_request called for GPIO 16
May  5 07:05:09 kernel: MerlinSupport::merlin_load_firmware():  INFO: wait 1024 comclks for 3KB data ram initialization...
May  5 07:05:09 kernel: MerlinSupport::merlin_load_firmware():  Checking init_done passed ...
May  5 07:05:09 kernel: MerlinSupport::merlin_load_firmware():  begin writing firmware to the program ram ...
May  5 07:05:09 crashlog: <6>bcm-bca-leds ff803000.led_ctrl:led_gpio_16: SW led 16 registered
May  5 07:05:09 kernel: #################################################################################
May  5 07:05:09 kernel: Done.
May  5 07:05:09 kernel: MerlinSupport::merlin_load_firmware():  end writing firmware to the program ram ...
May  5 07:05:09 kernel: MerlinSupport::merlin16_serdes_init(): Step 6.1 De-assert micro reset
May  5 07:05:09 crashlog: <6>pinctrl-bcmbca ff800554.pinctrl: bcmbca_gpio_request called for GPIO 2
May  5 07:05:09 kernel: MerlinSupport::merlin_wait_uc_active():    wait 50us comclks for micro to be up...
May  5 07:05:09 kernel: MerlinSupport::merlin_wait_uc_active():  Checking uc_active passed ...
May  5 07:05:09 kernel: MerlinSupport::merlin_wait_uc_active():  micro is ready for command ...
May  5 07:05:09 kernel: MerlinSupport::merlin_wait_uc_crc_verify():  micro is ready for command ...
May  5 07:05:09 crashlog: <6>bcm-bca-leds ff803000.led_ctrl:led_gpio_2: SW led 2 registered
May  5 07:05:09 kernel: MerlinSupport::merlin_wait_uc_crc_verify(): DSC ready for command is not working; SerDes is probably reset!!! reset_state = 7
May  5 07:05:09 kernel: MerlinSupport::merlin_wait_uc_crc_verify():  uCode CRC Verify ...
May  5 07:05:09 kernel: MerlinSupport::merlin_wait_uc_crc_verify():  wait 500us for crc verify to be done ...
May  5 07:05:09 kernel: already waiting 1 ms
May  5 07:05:09 crashlog: <6>pinctrl-bcmbca ff800554.pinctrl: bcmbca_gpio_request called for GPIO 14
May  5 07:05:09 kernel: already waiting 2 ms
May  5 07:05:09 kernel: already waiting 3 ms
May  5 07:05:09 kernel: already waiting 4 ms
May  5 07:05:09 kernel: already waiting 5 ms
May  5 07:05:09 crashlog: <6>bcm-bca-leds ff803000.led_ctrl:led_gpio_14: SW led 14 registered
May  5 07:05:09 kernel: already waiting 6 ms
May  5 07:05:09 kernel: already waiting 7 ms
May  5 07:05:09 kernel: MerlinSupport::merlin_wait_uc_crc_verify():  CRC verification passed ...
May  5 07:05:09 crashlog: <4>Broadcom GBPM v0.1 initialized
May  5 07:05:09 kernel: MerlinSupport::merline_speed_set_core(): Step 7 Config Speed to 2
May  5 07:05:09 kernel: No option found for: "-d ML_C_VCO_10P3125", added default value 0 in index 9
May  5 07:05:09 kernel: --- Step 8 PLL/PMD setup configuration for speed 0, mode 1.
May  5 07:05:09 kernel: MerlinSupport::merline_speed_set_core(): PMD Setup 50MHz, 10.3125GHz VCO programming
May  5 07:05:09 crashlog: <4>Broadcom IQoS v1.0 initialized
May  5 07:05:09 kernel: MerlinSupport::merlin_wait_uc_active():    wait 50us comclks for micro to be up...
May  5 07:05:09 kernel: MerlinSupport::merlin_wait_uc_active():  Checking uc_active passed ...
May  5 07:05:09 kernel: MerlinSupport::merlin_wait_uc_active():  micro is ready for command ...
May  5 07:05:09 kernel: MerlinSupport::merline_speed_set_core(): Step 9. Configure Core level regsiter
May  5 07:05:09 crashlog: <4>Broadcom Logger v0.1
May  5 07:05:09 kernel: MerlinSupport::merline_speed_set_core(): Step 10. Set core_congif_from_pcs
May  5 07:05:09 kernel: No option found for: "-d ML_C_VCO_12P5", added default value 0 in index 10
May  5 07:05:09 kernel: MerlinSupport::merline_speed_set_core(): RAM variable vco_rate is 19
May  5 07:05:09 crashlog: <4>/dev/bcmnet Char device registered
May  5 07:05:09 kernel: MerlinSupport::merlin_cfg_core_ram_var():  program core_config_word 0x26 to ram address 0x20000200 ...
May  5 07:05:09 kernel: MerlinSupport::merline_speed_set_core(): Step 12. Reset Datapath (core)
May  5 07:05:09 kernel: MerlinSupport::merlin_reset_datapath_core(): Datapath Reset (core) in progress
May  5 07:05:09 kernel: MerlinSupport::merline_speed_set_core(): Step 13. Lane Configuration
May  5 07:05:09 crashlog: <0>skb_free_task created successfully with start budget 256
May  5 07:05:09 kernel: MerlinSupport::merline_speed_set_core(): Step 13.a. Configure lane registers
May  5 07:05:09 kernel: MerlinSupport::merline_speed_set_core(): RAM variable an_enabled is 0
May  5 07:05:09 kernel: MerlinSupport::merlin_cfg_lane_ram_var():  program lane_config_word 0x0 to ram address 0x20000300 ...
May  5 07:05:09 kernel: MerlinSupport::merlin_lane_config_speed(#2):
May  5 07:05:09 crashlog: <4>^[[0;34mBLOG v3.0 Initialized^[[0m
May  5 07:05:09 kernel: MerlinSupport::CONFIGURING FOR FORCE 1G
May  5 07:05:09 kernel: MerlinSupport::merlin_lane_config_speed(): Core #0 Lane #0 PMD Lock Speed Up programming
May  5 07:05:09 kernel: INFO MerlinSupport::merlin_lane_config_speed(): END Merlin core #0 lane #0 Initialization procedure
May  5 07:05:09 kernel: MerlinSupport::merlin_chk_pll_lock(): Checking Core #0 PLL Lock Status
May  5 07:05:09 crashlog: <4>BLOG Rule v1.0 Initialized
May  5 07:05:09 kernel: MerlinSupport::merlin_chk_pll_lock(): PLL Locked
May  5 07:05:09 kernel: INFO MerlinSupport::merlin16_serdes_init(): END Merlin Initialization procedure
May  5 07:05:09 kernel: MerlinSupport::merline_speed_set_core(): Step 7 Config Speed to 2
May  5 07:05:09 crashlog: <4>Skip Legacy Led init
May  5 07:05:09 kernel: --- Step 8 PLL/PMD setup configuration for speed 0, mode 13.
May  5 07:05:09 kernel: MerlinSupport::merline_speed_set_core(): PMD Setup 50MHz, 10.3125GHz VCO programming
May  5 07:05:09 kernel: MerlinSupport::merlin_wait_uc_active():    wait 50us comclks for micro to be up...
May  5 07:05:09 kernel: MerlinSupport::merlin_wait_uc_active():  Checking uc_active passed ...
May  5 07:05:09 crashlog: <6>bca_led_request_sw_led:L634 adsl-led led not found
May  5 07:05:09 kernel: MerlinSupport::merlin_wait_uc_active():  micro is ready for command ...
May  5 07:05:09 kernel: MerlinSupport::merline_speed_set_core(): Step 9. Configure Core level regsiter
May  5 07:05:09 kernel: MerlinSupport::merline_speed_set_core(): Step 10. Set core_congif_from_pcs
May  5 07:05:09 kernel: MerlinSupport::merline_speed_set_core(): RAM variable vco_rate is 19
May  5 07:05:09 crashlog: <6>bca_led_request_sw_led:L634 adsl-fail-led led not found
May  5 07:05:09 kernel: MerlinSupport::merlin_cfg_core_ram_var():  program core_config_word 0x26 to ram address 0x20000200 ...
May  5 07:05:09 kernel: MerlinSupport::merline_speed_set_core(): Step 12. Reset Datapath (core)
May  5 07:05:09 kernel: MerlinSupport::merlin_reset_datapath_core(): Datapath Reset (core) in progress
May  5 07:05:09 crashlog: <6>bca_led_request_sw_led:L634 sec-adsl-led led not found
May  5 07:05:09 kernel: MerlinSupport::merline_speed_set_core(): Step 13. Lane Configuration
May  5 07:05:09 kernel: MerlinSupport::merline_speed_set_core(): Step 13.a. Configure lane registers
May  5 07:05:09 kernel: MerlinSupport::merline_speed_set_core(): RAM variable an_enabled is 0
May  5 07:05:09 kernel: MerlinSupport::merlin_cfg_lane_ram_var():  program lane_config_word 0x0 to ram address 0x20000300 ...
May  5 07:05:09 crashlog: <6>bca_led_request_sw_led:L634 sec-adsl-fail-led led not found
May  5 07:05:09 kernel: MerlinSupport::merlin_lane_config_speed(#2):
May  5 07:05:09 kernel: MerlinSupport::CONFIGURING FOR FORCE 1G
May  5 07:05:09 kernel: MerlinSupport::merlin_lane_config_speed(): Core #0 Lane #0 PMD Lock Speed Up programming
May  5 07:05:09 crashlog: <6>bca_led_request_sw_led:L634 wan-data-led led not found
May  5 07:05:09 kernel: INFO MerlinSupport::merlin_lane_config_speed(): END Merlin core #0 lane #0 Initialization procedure
May  5 07:05:09 kernel: MerlinSupport::merlin_chk_pll_lock(): Checking Core #0 PLL Lock Status
May  5 07:05:09 kernel: MerlinSupport::merlin_chk_pll_lock(): PLL Locked
May  5 07:05:09 kernel: ^[[0;30;102m=== End of 10G Active Ethernet Initialization for core 0 port 0 ===^[[0m
May  5 07:05:09 crashlog: <6>bca_led_request_sw_led:L634 wan-data-fail-led led not found
May  5 07:05:09 kernel: phy 0x11 is macsec capable, initializing macsec module
May  5 07:05:09 kernel: MACSEC: macsec init DONE
May  5 07:05:09 kernel: ephy_leds_init SW 0 Port 5 led idx 5 configured as:
May  5 07:05:09 crashlog: <6>bca_led_request_sw_led:L634 wl-sess-led led not found
May  5 07:05:09 kernel: led ctrl 0x00000003 encode 0x0003b6ff encode sel 0x00004900
May  5 07:05:09 kernel: BCMENET: Enabling Software GSO for eth5
May  5 07:05:09 kernel: Creating CPU ring for queue number 4 with 1024 packets descriptor=0xffffff8000d46ec0, size_of_entry 16
May  5 07:05:09 kernel: Done initializing Ring 4 Base=0xffffffc029330000 num of entries= 1024 RDD Base=29330000 descriptor=0xffffff8000d46ec0
May  5 07:05:09 crashlog: <6>bca_led_request_sw_led:L634 voip-led led not found
May  5 07:05:09 kernel: Creating CPU ring for queue number 3 with 1024 packets descriptor=0xffffff8000d46e40, size_of_entry 16
May  5 07:05:09 kernel: Done initializing Ring 3 Base=0xffffffc029338000 num of entries= 1024 RDD Base=29338000 descriptor=0xffffff8000d46e40
May  5 07:05:09 kernel: eth0      : Down          A0:36:BC:B0:D4:98 IntSw:P0 Lgcl: 0 LAN PHY_ID:0x01:OnChip       NoApd    PwrDn       1 Gbps        EGPHY Cfg: ANG.  1 Gbps;             Down                   Unknown
May  5 07:05:09 crashlog: <6>bca_led_request_sw_led:L634 voip1-ok-led led not found
May  5 07:05:09 kernel: eth1      : Down          A0:36:BC:B0:D4:98 IntSw:P1 Lgcl: 1 LAN PHY_ID:0x02:OnChip       NoApd    PwrDn       1 Gbps        EGPHY Cfg: ANG.  1 Gbps;             Down                   Unknown
May  5 07:05:09 kernel: eth2      : Down          A0:36:BC:B0:D4:98 IntSw:P2 Lgcl: 2 LAN PHY_ID:0x03:OnChip       NoApd    PwrDn       1 Gbps        EGPHY Cfg: ANG.  1 Gbps;             Down                   Unknown
May  5 07:05:09 kernel: eth3      : Down          A0:36:BC:B0:D4:98 IntSw:P3 Lgcl: 3 LAN PHY_ID:0x04:OnChip       NoApd    PwrDn       1 Gbps        EGPHY Cfg: ANG.  1 Gbps;             Down                   U
May  5 07:05:09 crashlog: <6>bca_led_request_sw_led:L634 voip1-fail-led led not found
May  5 07:05:09 kernel: nknown
May  5 07:05:09 kernel: eth4      : Down          A0:36:BC:B0:D4:98 IntSw:P4 Lgcl: 4 LAN PHY_ID:0x19:Extrnl RGMII NoApd    PwrDn       1 Gbps        EGPHY Cfg: ANG.  1 Gbps;             Down                   Unknown
May  5 07:05:09 kernel: eth5      : Down          A0:36:BC:B0:D4:98 IntSw:P5 Lgcl: 5 LAN     S1K2KR
May  5 07:05:09 kernel:             PHY_ID:0x06:OnChip       ApdOn    PwrDn      10 Gbps   10GAE#L0.0 Cfg: ANG. 10 Gbps;             Down                      AUS1KR2KRX5KRX10R:              S1K2KR:           SGMII
May  5 07:05:09 crashlog: <6>bca_led_request_sw_led:L634 voip2-ok-led led not found
May  5 07:05:09 kernel:             PHY_ID:0x11:Extrnl Cscde ApdOn    PwrDn      10 Gbps  4912M       Cfg: ANG.2.5 Gbps;             Down                                S1K2KIR:              S1K2KR:          Uknown
May  5 07:05:09 kernel: dgasp: kerSysRegisterDyingGaspHandler: bcmsw registered
May  5 07:05:09 kernel: bcm_enet_init_post:L2413 ENET system contructed and configured enet-kthrd thread
May  5 07:05:09 kernel: enet_kthread_handler:L297 Instantiating ENET thread
May  5 07:05:09 kernel: ^[[0;34m[NTC bitpool] idx_pool_init: 551:PktRnr[0]:Create Index Pool_Size = 17408^[[0m
May  5 07:05:09 crashlog: <6>bca_led_request_sw_led:L634 voip2-fail-led led not found
May  5 07:05:09 kernel: ^[[0;34m[NTC bitpool] idx_pool_init: 551:L2L3-ucast:Create Index Pool_Size = 32768^[[0m
May  5 07:05:09 kernel: Initialized Runner Host Layer
May  5 07:05:09 kernel: Initialized Runner Unicast Layer
May  5 07:05:09 crashlog: <6>bca_led_request_sw_led:L634 pots-led led not found
May  5 07:05:09 kernel: Initialized Runner L2 Unicast Layer
May  5 07:05:09 kernel: ^[[0;34m[NTC bitpool] idx_pool_init: 551:mcast:Create Index Pool_Size = 1152^[[0m
May  5 07:05:09 kernel: IPTV ddr base addr: 0x0000000028ca0000
May  5 07:05:09 crashlog: <6>bca_led_request_sw_led:L634 dect-led led not found
May  5 07:05:09 kernel: IPTV virtual ddr base addr: ffffffc028ca0000
May  5 07:05:09 kernel: Initialized Runner Multicast Layer
May  5 07:05:09 kernel: ^[[0;34m[NTC bitpool] idx_pool_init: 551:mcast_whitelist:Create Index Pool_Size = 1024^[[0m
May  5 07:05:09 kernel: Initialized Runner Multicast Layer
May  5 07:05:09 kernel: ^[[0;34m[NTC bitpool] idx_pool_init: 551:PktRnr[1]:Create Index Pool_Size = 1024^[[0m
May  5 07:05:09 crashlog: <6>bca_led_request_sw_led:L634 wl0-led led not found
May  5 07:05:09 kernel: ^[[0;34m[NTC bitpool] idx_pool_init: 551:FHW[0]:Create Index Pool_Size = 17408^[[0m
May  5 07:05:09 kernel: Retrieve num_fhw_path=64
May  5 07:05:09 kernel: ^[[0;36;44mPathstats allocated 2048 bytes^[[0m
May  5 07:05:09 kernel: ^[[0;36;44mBroadcom Packet Flow Cache HW acceleration enabled.^[[0m
May  5 07:05:09 crashlog: <6>bca_led_request_sw_led:L634 wl1-led led not found
May  5 07:05:09 kernel: Enabled Runner binding to Flow Cache
May  5 07:05:09 kernel: Initialized Runner Protocol Layer (1250)
May  5 07:05:09 kernel: PKTRUNNER : RDPA system init gbe_wan_emac=12 isRdpaGbeWanConfigured=0
May  5 07:05:09 crashlog: <6>bca_led_request_sw_led:L634 usb-led led not found
May  5 07:05:09 kernel: Broadcom Runner Blog Driver Char Driver v0.1 Registered <309>
May  5 07:05:09 kernel: bcm_mcast_init successful
May  5 07:05:09 kernel: Broadcom PCIe Host Controller Driver (impl1)^M
May  5 07:05:09 kernel:   bcm-pcie: DEF CFG: ssc 0x0, speed  0x0, bootorder 0x0, apon 0x0
May  5 07:05:09 crashlog: <6>bca_led_request_sw_led:L634 sim-led led not found
May  5 07:05:09 kernel:   bcm-pcie:        : pwr 0x0, errlog 0x1111, msi 0x1111, acc  0x1111, pllclkid 0x3210
May  5 07:05:09 kernel:   bcm-pcie:        : loglevel 0x1 pllclkadj 0x0
May  5 07:05:09 kernel:   bcm-pcie: Core [1] DT node available: pcie1
May  5 07:05:09 kernel: bcm-pcie 80090000.pcie1: PCI host bridge to bus 0000:00
May  5 07:05:09 crashlog: <6>bca_led_request_sw_led:L634 sim-itms-led led not found
May  5 07:05:09 kernel: pci_bus 0000:00: root bus resource [mem 0xd0000000-0xdfffffff]
May  5 07:05:09 kernel: pci_bus 0000:00: root bus resource [bus 00-0f]
May  5 07:05:09 kernel:   bcm-pcie: found Port [1] GEN3 Core Rev [4.03] with 2 Lanes^M
May  5 07:05:09 kernel:   bcm-pcie: Port [1] using 16FFC Viper Serdes
May  5 07:05:09 crashlog: <6>clocksource: Switched to clocksource arch_sys_counter
May  5 07:05:09 kernel: GetRCalSetting_1UM_VERT: Skipping SW RCAL as RCAL_1UM_VERT is not defined
May  5 07:05:09 kernel:   bcm-pcie: Core [1] Link UP - [2] lanes, [GEN2] speed^M
May  5 07:05:09 kernel:   bcm-pcie: Core [1] Enabled PCIE/UBUS Error Interrupts^M
May  5 07:05:09 kernel:   bcm-pcie: Core [1] UBUS Intr [UBUS_LINKUP]^M
May  5 07:05:09 crashlog: <6>NET: Registered protocol family 2
May  5 07:05:09 kernel: pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
May  5 07:05:09 crashlog: <6>tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes)
May  5 07:05:09 crashlog: <6>TCP established hash table entries: 8192 (order: 4, 65536 bytes)
May  5 07:05:09 crashlog: <6>TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
May  5 07:05:09 kernel: pci 0000:00:00.0: BAR 8: assigned [mem 0xd0000000-0xd0bfffff]
May  5 07:05:09 kernel: pci 0000:00:00.0: BAR 9: assigned [mem 0xd0c00000-0xd0cfffff 64bit pref]
May  5 07:05:09 kernel: pci 0000:01:00.0: BAR 2: assigned [mem 0xd0000000-0xd07fffff 64bit]
May  5 07:05:09 kernel: pci 0000:01:00.0: BAR 4: assigned [mem 0xd0c00000-0xd0cfffff 64bit pref]
May  5 07:05:09 kernel: pci 0000:01:00.0: BAR 0: assigned [mem 0xd0800000-0xd080ffff 64bit]
May  5 07:05:09 crashlog: <6>TCP: Hash tables configured (established 8192 bind 8192)
May  5 07:05:09 kernel: pci 0000:00:00.0: PCI bridge to [bus 01]
May  5 07:05:09 kernel: pci 0000:00:00.0:   bridge window [mem 0xd0000000-0xd0bfffff]
May  5 07:05:09 kernel: pci 0000:00:00.0:   bridge window [mem 0xd0c00000-0xd0cfffff 64bit pref]
May  5 07:05:09 kernel: pcieport 0000:00:00.0: enabling device (0000 -> 0002)
May  5 07:05:09 kernel: pcieport 0000:00:00.0: Max Payload Size set to  512/ 512 (was  128), Max Read Rq  512
May  5 07:05:09 kernel: pci 0000:01:00.0: Max Payload Size set to  512/ 512 (was  128), Max Read Rq  512
May  5 07:05:09 kernel:   bcm-pcie: Core [3] DT node available: pcie3
May  5 07:05:09 kernel: bcm-pcie 800b0000.pcie3: PCI host bridge to bus 0001:00
May  5 07:05:09 kernel: pci_bus 0001:00: root bus resource [mem 0xa0000000-0xbfffffff]
May  5 07:05:09 kernel: pci_bus 0001:00: root bus resource [bus 00-0f]
May  5 07:05:09 kernel:   bcm-pcie: found Port [3] GEN3 Core Rev [4.03] with 1 Lanes^M
May  5 07:05:09 kernel:   bcm-pcie: Port [3] using 16FFC Viper Serdes
May  5 07:05:09 kernel: GetRCalSetting_1UM_VERT: Skipping SW RCAL as RCAL_1UM_VERT is not defined
May  5 07:05:09 kernel:   bcm-pcie: Core [3] Link UP - [1] lanes, [GEN2] speed^M
May  5 07:05:09 kernel:   bcm-pcie: Core [3] Enabled PCIE/UBUS Error Interrupts^M
May  5 07:05:09 kernel:   bcm-pcie: Core [3] UBUS Intr [UBUS_LINKUP]^M
May  5 07:05:09 kernel: pci 0001:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
May  5 07:05:09 crashlog: <6>UDP hash table entries: 512 (order: 2, 16384 bytes)
May  5 07:05:09 crashlog: <6>UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
May  5 07:05:09 crashlog: <6>NET: Registered protocol family 1
May  5 07:05:09 kernel: pci 0001:00:00.0: BAR 8: assigned [mem 0xa0000000-0xa0bfffff]
May  5 07:05:09 kernel: pci 0001:00:00.0: BAR 9: assigned [mem 0xa0c00000-0xa0cfffff 64bit pref]
May  5 07:05:09 kernel: pci 0001:01:00.0: BAR 2: assigned [mem 0xa0000000-0xa07fffff 64bit]
May  5 07:05:09 kernel: pci 0001:01:00.0: BAR 4: assigned [mem 0xa0c00000-0xa0cfffff 64bit pref]
May  5 07:05:09 crashlog: <7>PCI: CLS 0 bytes, default 64
May  5 07:05:09 kernel: pci 0001:01:00.0: BAR 0: assigned [mem 0xa0800000-0xa080ffff 64bit]
May  5 07:05:09 kernel: pci 0001:00:00.0: PCI bridge to [bus 01]
May  5 07:05:09 kernel: pci 0001:00:00.0:   bridge window [mem 0xa0000000-0xa0bfffff]
May  5 07:05:09 crashlog: <5>Initialise system trusted keyrings
May  5 07:05:09 kernel: pci 0001:00:00.0:   bridge window [mem 0xa0c00000-0xa0cfffff 64bit pref]
May  5 07:05:09 kernel: pcieport 0001:00:00.0: enabling device (0000 -> 0002)
May  5 07:05:09 kernel: pcieport 0001:00:00.0: Max Payload Size set to  512/ 512 (was  128), Max Read Rq  512
May  5 07:05:09 kernel: pci 0001:01:00.0: Max Payload Size set to  512/ 512 (was  128), Max Read Rq  512
May  5 07:05:09 kernel: ^[[1m^[[34mWifi Forwarding Driver is initialized!^[[0m
May  5 07:05:09 crashlog: <6>workingset: timestamp_bits=62 max_order=18 bucket_order=0
May  5 07:05:09 kernel: bcmflex 83800000.spu_flexrm: FlexRM probing...
May  5 07:05:09 kernel: bcmflex 83800000.spu_flexrm: Device tree specified 4 rings
May  5 07:05:09 kernel: bcmflex 83800000.spu_flexrm: Device tree specified 2 AEs
May  5 07:05:09 kernel: bcmflex 83800000.spu_flexrm: in secured transaction mode
May  5 07:05:09 crashlog: <6>squashfs: version 4.0 (2009/01/31) Phillip Lougher
May  5 07:05:09 kernel: bcmflex 83800000.spu_flexrm: HW_INIT_DONE detected
May  5 07:05:09 kernel: bcmflex 83800000.spu_flexrm: IRQ# 52 requested for ring #0
May  5 07:05:09 kernel: bcmflex 83800000.spu_flexrm: CPU mask and IRQ affinity for ring0 are set to 1
May  5 07:05:09 crashlog: <6>jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
May  5 07:05:09 kernel: bcmflex 83800000.spu_flexrm: IRQ# 53 requested for ring #1
May  5 07:05:09 kernel: bcmflex 83800000.spu_flexrm: CPU mask and IRQ affinity for ring1 are set to 2
May  5 07:05:09 kernel: bcmflex 83800000.spu_flexrm: IRQ# 54 requested for ring #2
May  5 07:05:09 kernel: bcmflex 83800000.spu_flexrm: CPU mask and IRQ affinity for ring2 are set to 3
May  5 07:05:09 crashlog: <6>fuse init (API version 7.27)
May  5 07:05:09 kernel: bcmflex 83800000.spu_flexrm: IRQ# 55 requested for ring #3
May  5 07:05:09 kernel: bcmflex 83800000.spu_flexrm: CPU mask and IRQ affinity for ring3 are set to 1
May  5 07:05:09 kernel: bcmflex 83800000.spu_flexrm: loaded successfully!
May  5 07:05:09 kernel: bcmspu: loading driver
May  5 07:05:09 crashlog: <5>Key type asymmetric registered
May  5 07:05:09 kernel: broadcomThermalDrv ubus@ff800000:brcm-therm: init (CPU count 4 4 4 4)
May  5 07:05:09 kernel: brcm_otp_init entry
May  5 07:05:09 kernel: init (1): drop_caches: 1
May  5 07:05:09 kernel: emf: Unknown symbol osl_malloc (err -2)
May  5 07:05:09 crashlog: <5>Asymmetric key parser 'x509' registered
May  5 07:05:09 kernel: emf: Unknown symbol osl_pktdup_cpy (err -2)
May  5 07:05:09 kernel: emf: Unknown symbol osl_mfree (err -2)
May  5 07:05:09 kernel: emf: Unknown symbol linux_pktfree (err -2)
May  5 07:05:09 kernel: emf: Unknown symbol osl_pktdup (err -2)
May  5 07:05:09 crashlog: <6>io scheduler noop registered (default)
May  5 07:05:09 kernel: igs: Unknown symbol emfc_wmf_scbfind (err -2)
May  5 07:05:09 kernel: igs: Unknown symbol osl_malloc (err -2)
May  5 07:05:09 kernel: igs: Unknown symbol emfc_mfdb_ipv6_membership_add (err -2)
May  5 07:05:09 crashlog: <6>io scheduler mq-deadline registered
May  5 07:05:09 kernel: igs: Unknown symbol osl_detach (err -2)
May  5 07:05:09 kernel: igs: Unknown symbol emfc_rtport_del (err -2)
May  5 07:05:09 kernel: igs: Unknown symbol emfc_igmp_snooper_register (err -2)
May  5 07:05:09 crashlog: <6>io scheduler kyber registered
May  5 07:05:09 kernel: igs: Unknown symbol osl_attach (err -2)
May  5 07:05:09 kernel: igs: Unknown symbol emfc_mfdb_ipv6_membership_del (err -2)
May  5 07:05:09 kernel: igs: Unknown symbol emfc_wmf_get_igsc (err -2)
May  5 07:05:09 kernel: igs: Unknown symbol emfc_rtport_add (err -2)
May  5 07:05:09 crashlog: <6>iproc-rng200 ff800b80.rng: hwrng registered
May  5 07:05:09 kernel: igs: Unknown symbol emfc_igmp_snooper_unregister (err -2)
May  5 07:05:09 kernel: igs: Unknown symbol emfc_mfdb_membership_del (err -2)
May  5 07:05:09 kernel: igs: Unknown symbol osl_mfree (err -2)
May  5 07:05:09 kernel: igs: Unknown symbol emfc_mfdb_membership_add (err -2)
May  5 07:05:09 kernel: Loading wlshared Module...
May  5 07:05:09 crashlog: <6>brd: module loaded
May  5 07:05:09 kernel: cfg80211: Loading compiled-in X.509 certificates for regulatory database
May  5 07:05:09 kernel: cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
May  5 07:05:09 kernel: platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
May  5 07:05:09 kernel: cfg80211: failed to load regulatory.db
May  5 07:05:09 crashlog: <6>loop: module loaded
May  5 07:05:09 kernel: Loading HND Module
May  5 07:05:09 kernel: igs_module_init:840:     IGS 29 create network socket successful
May  5 07:05:09 kernel: osl_skb_audit: PASS
May  5 07:05:09 kernel: wl_module_init: passivemode set to 0x1
May  5 07:05:09 crashlog: <6>nand: device found, Manufacturer ID: 0xc2, Chip ID: 0xda
May  5 07:05:09 kernel: wl_module_init: txworkq set to 0x0
May  5 07:05:09 kernel: ^[[0;32mwl_pktfwd_sys_init:  ^[[1m^[[34mWL_PKTFWD[1.1.0]^[[0m Success^[[0m
May  5 07:05:09 kernel: wl 0001:01:00.0: enabling device (0000 -> 0002)
May  5 07:05:09 crashlog: <6>nand: Macronix MX30LF2G28AD
May  5 07:05:09 kernel: wl0: creating kthread wl0-kthrd
May  5 07:05:09 kernel: BME Service Initialization
May  5 07:05:09 kernel: BME: M2M Core id 0x844 rev 129
May  5 07:05:09 kernel: M2M Service Initialization: M2M_DD_ENAB 0x00000003
May  5 07:05:09 crashlog: <6>nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 128
May  5 07:05:09 kernel: M2M: M2M Core id 0x844 rev 129
May  5 07:05:09 kernel: M2M: SUCCESS eng 0 alloc rings <00000000d57b8378,00000000df5b93ff>,00000000bd93f347 depth 256
May  5 07:05:09 kernel: M2M: SUCCESS eng 1 alloc rings <000000002e57090c,00000000ce4c0f3f>,00000000f6934ff3 depth 256
May  5 07:05:09 kernel: M2M: DMA 0 IntRcvLazy 01000000
May  5 07:05:09 kernel: M2M: DMA 0 RcvCtrl XmtCtrl enabled
May  5 07:05:09 crashlog: <6>bcm63xx_nand ff801800.nand: Adjust timing_1 to 0x6532845b timing_2 to 0x00091e94
May  5 07:05:09 kernel: M2M: DMA 1 IntRcvLazy 01000000
May  5 07:05:09 kernel: M2M: DMA 1 RcvCtrl XmtCtrl enabled
May  5 07:05:09 kernel: wl0: wlc_ap_attach dynamic_ed_thresh_enable = 0
May  5 07:05:09 crashlog: <6>bcm63xx_nand ff801800.nand: detected 256MiB total, 128KiB blocks, 2KiB pages, 27B OOB, 8-bit, BCH-8
May  5 07:05:09 kernel: BME:register key<1010802> user RLM sel IDX set 1 mem 2 8 hi 0 0
May  5 07:05:09 kernel: CSIMON module registered
May  5 07:05:09 kernel: wfd0-thrd WL 0 FLowControl total<55924> lo<16777> hi<8388> favor prio<4>
May  5 07:05:09 kernel: ^[[0;31mwfd_bind: wfd0-thrd initialized pktlists: radio 0 nodes 1032 xfer wl_pktfwd_xfer_callback+0x0/0x450 [wl]
May  5 07:05:09 crashlog: <6>Bad block table found at page 131008, version 0x01
May  5 07:05:09 kernel: ^[[0m
May  5 07:05:09 kernel: Creating CPU ring for queue number 5 with 1024 packets descriptor=0xffffff8000d46f40, size_of_entry 16
May  5 07:05:09 kernel: Done initializing Ring 5 Base=0xffffffc027758000 num of entries= 1024 RDD Base=27758000 descriptor=0xffffff8000d46f40
May  5 07:05:09 kernel: Creating CPU ring for queue number 6 with 1024 packets descriptor=0xffffff8000d46fc0, size_of_entry 16
May  5 07:05:09 crashlog: <6>Bad block table found at page 130944, version 0x01
May  5 07:05:09 kernel: Done initializing Ring 6 Base=0xffffffc027770000 num of entries= 1024 RDD Base=27770000 descriptor=0xffffff8000d46fc0
May  5 07:05:09 kernel: ^[[1m^[[34m wfd_bind: Dev eth%d wfd_idx 0 wl_radio_idx 0 Type skb:sll configured WFD thread wfd0-thrd minQId/maxQId (0/1), status (0) qmask 0x3^[[0m
May  5 07:05:09 kernel: Instantiating WFD 0 thread
May  5 07:05:09 kernel: ^[[0;32mwl_wfd_bind: wl0 wfd_idx 0 success^[[0m
May  5 07:05:09 crashlog: <5>3 cmdlinepart partitions found on MTD device brcmnand.0
May  5 07:05:09 kernel: wfd_registerdevice Successfully registered dev eth6 ifidx 0 wfd_idx 0
May  5 07:05:09 kernel: eth6: Broadcom BCM6710 802.11 Wireless Controller 17.10.188.6401 (r808804)
May  5 07:05:09 kernel: dgasp: kerSysRegisterDyingGaspHandler: eth6 registered
May  5 07:05:09 crashlog: <5>Creating 3 MTD partitions on "brcmnand.0":
May  5 07:05:09 kernel: DHD_FKB_POOL size is:1280 and entry size:2816
May  5 07:05:09 kernel: DHD_PKTTAG POOL size is:2592 and entry size:128
May  5 07:05:09 kernel: ^[[0;32mdhd_pktfwd_sys_init:  ^[[1m^[[34mdhd_PKTFWD[1.0.0]^[[0m Success^[[0m
May  5 07:05:09 kernel: PCI_PROBE:  bus 1, slot 0,vendor 14E4, device 6715(good PCI location)
May  5 07:05:09 crashlog: <5>0x000000000000-0x000000200000 : "loader"
May  5 07:05:09 kernel: pcieh 0000:01:00.0: enabling device (0000 -> 0002)
May  5 07:05:09 kernel: dor1: runner supported ring format types TxP 0x5, RxP 0x3 TxC 0x3 RxC 0x3^M
May  5 07:05:09 kernel: dhd_runner_attach: Tx Offload - Enabled, Ring Size = 1024
May  5 07:05:09 kernel: dhd_runner_attach: Rx Offload - Enabled, Ring Size = 1024
May  5 07:05:09 crashlog: <5>0x000000200000-0x00000fe00000 : "image"
May  5 07:05:09 kernel: TX wakeup info: reg = <0x82801004>, val = <0x00000006>
May  5 07:05:09 kernel: RX wakeup info: reg = <0x82801004>, val = <0x0000000d>
May  5 07:05:09 kernel: CFG80211-ERROR) wl_setup_wiphy :
May  5 07:05:09 kernel: Registering Vendor80211
May  5 07:05:09 crashlog: <5>0x00000fe00000-0x00000fe80000 : "crashlog"
May  5 07:05:09 kernel: CFG80211-ERROR) wl_cfg80211_apply_eventbuffer :
May  5 07:05:09 kernel: Get event_msgs error (-19)
May  5 07:05:09 kernel: CFG80211-ERROR) wl_cfg80211_set_cac_state_change_eventbits :
May  5 07:05:09 kernel: failed to set WLC_E_CAC_STATE_CHANGE bit
May  5 07:05:09 kernel: dhd_attach(): thread:dhd_watchdog_thread:3d0 started
May  5 07:05:09 crashlog: <3>bcm63xx-hsspi ff801000.spi: spi driver using polling mode
May  5 07:05:09 kernel: ^[[0;31mwfd_bind: wfd1-thrd initialized pktlists: radio 1 nodes 1032 xfer dhd_pktfwd_xfer_callback+0x0/0x8a0 [dhd]
May  5 07:05:09 kernel: ^[[0m
May  5 07:05:09 kernel: Creating CPU ring for queue number 8 with 1024 packets descriptor=0xffffff8000d470c0, size_of_entry 16
May  5 07:05:09 crashlog: <6>IMQ driver loaded successfully. (numdevs = 3, numqueues = 1, imq_dev_accurate_stats = 1)
May  5 07:05:09 kernel: Done initializing Ring 8 Base=0xffffffc025c20000 num of entries= 1024 RDD Base=25c20000 descriptor=0xffffff8000d470c0
May  5 07:05:09 kernel: Creating CPU ring for queue number 9 with 1024 packets descriptor=0xffffff8000d47140, size_of_entry 16
May  5 07:05:09 kernel: Done initializing Ring 9 Base=0xffffffc025c28000 num of entries= 1024 RDD Base=25c28000 descriptor=0xffffff8000d47140
May  5 07:05:09 kernel: ^[[1m^[[34m wfd_bind: Dev eth%d wfd_idx 1 wl_radio_idx 1 Type fkb:sll configured WFD thread wfd1-thrd minQId/maxQId (0/1), status (0) qmask 0x3^[[0m
May  5 07:05:09 crashlog: <6>   Hooking IMQ after NAT on PREROUTING.
May  5 07:05:09 kernel: Instantiating WFD 1 thread
May  5 07:05:09 kernel: ^[[0;32mdhd_wfd_bind: wl1 wfd_idx 1 success^[[0m
May  5 07:05:09 kernel: dhdpcie_download_map_bin: ext nvram exists, no srommap!
May  5 07:05:09 kernel: dor1: MSG Ring format set to 1
May  5 07:05:09 crashlog: <6>   Hooking IMQ before NAT on POSTROUTING.
May  5 07:05:09 kernel: dhd_runner_flowmgr_init: dhd1_rnr bootmem addr<ffffff8014755000> size<11534336>
May  5 07:05:09 kernel: dhd_runner_profile_init: profile = 3 1024/0512 2048/1024 1024/0512 0512/0512 0512/0512
May  5 07:05:09 kernel: ^[[0;33;40mdor1 TxOffl memory: Reserved<11 Mb> Needed<11 Mb>^[[0m
May  5 07:05:09 crashlog: <6>libphy: Fixed MDIO Bus: probed
May  5 07:05:09 kernel: dor1: using WME AC based flowid allocation
May  5 07:05:09 kernel: ^[[0;33;40mRunner DHD PCIE: vendor<0x14e4> device<0x6715> bus<1> slot<0>^[[0m
May  5 07:05:09 kernel: Initial configuration
May  5 07:05:09 kernel: =================================
May  5 07:05:09 crashlog: <6>PPP generic driver version 2.4.2
May  5 07:05:09 kernel:     rx_post_flow_ring_base_addr : ffffffc02750a000
May  5 07:05:09 kernel:     tx_post_flow_ring_base_addr : ffffff801472d000
May  5 07:05:09 kernel:     rx_complete_flow_ring_base_addr : ffffffc02750e000
May  5 07:05:09 kernel:     tx_complete_flow_ring_base_addr : ffffffc02750c000
May  5 07:05:09 crashlog: <6>PPP BSD Compression module registered
May  5 07:05:09 kernel:     r2d_wr_arr_base_addr : ffffff80197f1000, phys_addr : 0000000026198000
May  5 07:05:09 kernel:     d2r_rd_arr_base_addr : ffffff80197f1802, phys_addr : 0000000026198802
May  5 07:05:09 kernel:     r2d_rd_arr_base_addr : ffffff80197f2000, phys_addr : 0000000026199000
May  5 07:05:09 kernel:     d2r_wr_arr_base_addr : ffffff80197f1c02, phys_addr : 0000000026198c02
May  5 07:05:09 crashlog: <6>PPP MPPE Compression module registered
May  5 07:05:09 kernel:     tx_post_mgmt_arr_base_addr : ffffff80197f2800, phys_addr : 0000000026199800
May  5 07:05:09 kernel:     Doorbell Post Wakeup register : phy_addr: 0xd0802160, virt_addr: ffffff801a00a160
May  5 07:05:09 kernel:     Doorbell Complete Wakeup register : phy_addr: 0xd0802164, virt_addr: ffffff801a00a164
May  5 07:05:09 crashlog: <6>NET: Registered protocol family 24
May  5 07:05:09 kernel:     Doorbell ISR : ffffff80019fee70
May  5 07:05:09 kernel:     Doorbell CTX : ffffffc02756e400
May  5 07:05:09 kernel:     add_llcsnap_header : 1
May  5 07:05:09 kernel:     flow_ring_format : 1
May  5 07:05:09 kernel:     idma_active : 1
May  5 07:05:09 crashlog: <6>PPTP driver version 0.8.5
May  5 07:05:09 kernel:     hbqd mode : 0
May  5 07:05:09 kernel: Backup queue configuration:
May  5 07:05:09 kernel: ========================================
May  5 07:05:09 kernel: Base virt address = ffffff8013a74000, physical address = 000000003da21000
May  5 07:05:09 crashlog: <6>i2c /dev entries driver
May  5 07:05:09 kernel: Index fifo virt address = ffffff8013b7f000, physical address = 000000003db2c000
May  5 07:05:09 kernel: FPM management set:  DS = 34060, US = 102180, WLAN_Tx = (low_rsv:1024, high_rsv:512, wlan_rsv:20480, wlan_total:121668, global_total:99652) for 1 radios
May  5 07:05:09 kernel: Creating CPU ring for queue number 10 with 128 packets descriptor=0xffffff8000d471c0, size_of_entry 16
May  5 07:05:09 kernel: Done initializing Ring 10 Base=0xffffffc0274a2000 num of entries= 128 RDD Base=274a2000 descriptor=0xffffff8000d471c0
May  5 07:05:09 crashlog: <6>sdhci: Secure Digital Host Controller Interface driver
May  5 07:05:09 kernel: dhd_helper_cpu_exception_rxq_set_ex: cpu_port = 5, hw_queue = 10, set_exception_tc_to_rxq = 1
May  5 07:05:09 kernel: ^[[0;33;40mRunner DHD Offload initialization complete^[[0m
May  5 07:05:09 kernel: CUR_ETHERADDR : 6
May  5 07:05:09 crashlog: <6>sdhci: Copyright(c) Pierre Ossman
May  5 07:05:09 kernel: a0 36 bc b0 d4 9c
May  5 07:05:09 kernel: Dongle Host Driver, version 17.10.188.6401 (r808804)
May  5 07:05:09 kernel: Compiled in drivers/net/wireless/bcmdhd
May  5 07:05:09 kernel: wfd_registerdevice Successfully registered dev eth7 ifidx 0 wfd_idx 1
May  5 07:05:09 crashlog: <6>sdhci-pltfm: SDHCI platform and OF driver helper
May  5 07:05:09 kernel: Register interface [eth7]  MAC: a0:36:bc:b0:d4:9c
May  5 07:05:09 kernel: usbcore: registered new interface driver usbfs
May  5 07:05:09 kernel: usbcore: registered new interface driver hub
May  5 07:05:09 kernel: usbcore: registered new device driver usb
May  5 07:05:09 crashlog: <6>mmc0: SDHCI controller on ff810000.sdhci [ff810000.sdhci] using ADMA
May  5 07:05:09 kernel: bcm_bca_usb_ctrl_probe: usb3_enable 0 xhci_enable 0
May  5 07:05:09 kernel: bcm-bca-usb-ctrl 800cf200.usb_ctrl: ---- Powering up USB blocks
May  5 07:05:09 kernel: +++ usb_ctrl_cshcr2 ffffff8008e7525c= 40024=
May  5 07:05:09 kernel: bcm-bca-usb-xhci 800c0000.usb0_xhci: registered successfully
May  5 07:05:09 kernel: xhci-hcd xhci-hcd.0: xHCI Host Controller
May  5 07:05:09 crashlog: <6>hidraw: raw HID events driver (C) Jiri Kosina
May  5 07:05:09 kernel: xhci-hcd xhci-hcd.0: new USB bus registered, assigned bus number 1
May  5 07:05:09 kernel: xhci-hcd xhci-hcd.0: hcc params 0x0228ffed hci version 0x110 quirks 0x0000000000014810
May  5 07:05:09 crashlog: <6>GACT probability NOT on
May  5 07:05:09 kernel: xhci-hcd xhci-hcd.0: irq 56, io mem 0x800c0000
May  5 07:05:09 kernel: hub 1-0:1.0: USB hub found
May  5 07:05:09 kernel: hub 1-0:1.0: 2 ports detected
May  5 07:05:09 kernel: xhci-hcd xhci-hcd.0: xHCI Host Controller
May  5 07:05:09 kernel: xhci-hcd xhci-hcd.0: new USB bus registered, assigned bus number 2
May  5 07:05:09 crashlog: <6>Mirror/redirect action on
May  5 07:05:09 kernel: xhci-hcd xhci-hcd.0: Host supports USB 3.1 Enhanced SuperSpeed
May  5 07:05:09 kernel: hub 2-0:1.0: USB hub found
May  5 07:05:09 kernel: hub 2-0:1.0: 1 port detected
May  5 07:05:09 kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
May  5 07:05:09 crashlog: <6>u32 classifier
May  5 07:05:09 kernel: ehci-platform: EHCI generic platform driver
May  5 07:05:09 kernel: ehci-pci: EHCI PCI platform driver
May  5 07:05:09 kernel: ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
May  5 07:05:09 kernel: ohci-platform: OHCI generic platform driver
May  5 07:05:09 crashlog: <6>    Performance counters on
May  5 07:05:09 kernel: ohci-pci: OHCI PCI platform driver
May  5 07:05:09 kernel: usbcore: registered new interface driver cdc_acm
May  5 07:05:09 kernel: cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
May  5 07:05:09 kernel: usbcore: registered new interface driver asix
May  5 07:05:09 kernel: usbcore: registered new interface driver ax88179_178a
May  5 07:05:09 crashlog: <6>    input device check on
May  5 07:05:09 kernel: usbcore: registered new interface driver cdc_ether
May  5 07:05:09 kernel: usbcore: registered new interface driver rndis_host
May  5 07:05:09 kernel: usbcore: registered new interface driver cdc_ncm
May  5 07:05:09 crashlog: <6>    Actions configured
May  5 07:05:09 kernel: usbcore: registered new interface driver cdc_wdm
May  5 07:05:09 kernel: usbcore: registered new interface driver qmi_wwan
May  5 07:05:09 kernel: usbcore: registered new interface driver ipheth
May  5 07:05:09 crashlog: <6>xt_time: kernel timezone is -0000
May  5 07:05:09 crashlog: <6>gre: GRE over IPv4 demultiplexor driver
May  5 07:05:09 crashlog: <6>ip_gre: GRE over IPv4 tunneling driver
May  5 07:05:09 crashlog: <6>IPv4 over IPsec tunneling driver
May  5 07:05:09 crashlog: <6>NET: Registered protocol family 10
May  5 07:05:09 crashlog: <6>Segment Routing with IPv6
May  5 07:05:09 crashlog: <6>sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
May  5 07:05:09 crashlog: <6>ip6_gre: GRE over IPv6 tunneling driver
May  5 07:05:09 crashlog: <6>NET: Registered protocol family 17
May  5 07:05:09 crashlog: <6>NET: Registered protocol family 15
May  5 07:05:09 crashlog: <6>l2tp_core: L2TP core driver, V2.0
May  5 07:05:09 crashlog: <6>l2tp_ppp: PPPoL2TP kernel driver, V2.0
May  5 07:05:09 crashlog: <6>8021q: 802.1Q VLAN Support v1.8
May  5 07:05:09 crashlog: <6>sctp: Hash tables configured (bind 256/256)
May  5 07:05:09 crashlog: <1>brcmboard registered
May  5 07:05:09 crashlog: <4>brcmboard: brcm_board_init entry
May  5 07:05:09 crashlog: <4>Last RESET due to Unknown
May  5 07:05:09 crashlog: <4>RESET reason: 0x00000000
May  5 07:05:09 crashlog: <4>DYING GASP IRQ Initialized and Enabled
May  5 07:05:09 crashlog: <4>bcm_i2c: Error in loading module
May  5 07:05:09 crashlog: <6>
May  5 07:05:09 crashlog: <6>Optical detection module loaded.
May  5 07:05:09 crashlog: <5>Bridge Broadcom hooks registered
May  5 07:05:09 crashlog: <6>ebt_blog registered
May  5 07:05:09 crashlog: <6>ebt_ftos registered
May  5 07:05:09 crashlog: <6>ebt_qos_map registered
May  5 07:05:09 crashlog: <6>ebt_time registered
May  5 07:05:09 crashlog: <6>ebt_vtag registered
May  5 07:05:09 crashlog: <6>ebt_wmm_mark registered
May  5 07:05:09 crashlog: <6>ebt_reject registered
May  5 07:05:09 crashlog: <6>brcm-rgmii 837ff1b4.rgmii: registered
May  5 07:05:09 crashlog: <6>brcm-unimac 828a8000.unimac: registered
May  5 07:05:09 crashlog: <6>brcm-mdio 837ffd00.mdiosf2: switch_mdio_base=0xffffff8008c9dd00
May  5 07:05:09 crashlog: <6>brcm-mdio 837ffd00.mdiosf2:  registered
May  5 07:05:09 crashlog: <6>brcm-ephyled 837ff1ac.ephyled: registered
May  5 07:05:09 crashlog: <5>Loading compiled-in X.509 certificates
May  5 07:05:09 crashlog: <5>ubi0: attaching mtd2
May  5 07:05:09 crashlog: <5>ubi0: scanning is finished
May  5 07:05:09 crashlog: <5>ubi0: attached mtd2 (name "image", size 252 MiB)
May  5 07:05:09 crashlog: <5>ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
May  5 07:05:09 crashlog: <5>ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
May  5 07:05:09 crashlog: <5>ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
May  5 07:05:09 crashlog: <5>ubi0: good PEBs: 2016, bad PEBs: 0, corrupted PEBs: 0
May  5 07:05:09 crashlog: <5>ubi0: user volume: 9, internal volumes: 1, max. volumes count: 128
May  5 07:05:09 crashlog: <5>ubi0: max/mean erase counter: 57/30, WL threshold: 4096, image sequence number: 2077728035
May  5 07:05:09 crashlog: <5>ubi0: available PEBs: 313, total reserved PEBs: 1703, PEBs reserved for bad PEB handling: 40
May  5 07:05:09 crashlog: <5>ubi0: background thread "ubi_bgt0d" started, PID 118
May  5 07:05:09 crashlog: <6>block ubiblock0_4: created from ubi0:4(rootfs1)
May  5 07:05:09 crashlog: <4>Registered phy device: EGPHY:0x1
May  5 07:05:09 crashlog: <4>Registered phy device: EGPHY:0x2
May  5 07:05:09 crashlog: <4>Registered phy device: EGPHY:0x3
May  5 07:05:09 crashlog: <4>Registered phy device: EGPHY:0x4
May  5 07:05:09 crashlog: <4>Registered phy device: EGPHY:0x19
May  5 07:05:09 crashlog: <4>Registered phy device: EXT3:0x11
May  5 07:05:09 crashlog: <4>Registered phy device: 10GAE:0x6
May  5 07:05:09 crashlog: <6>VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
May  5 07:05:09 crashlog: <6>devtmpfs: mounted
May  5 07:05:09 crashlog: <6>Freeing unused kernel memory: 448K
May  5 07:05:09 crashlog: <6>Run /sbin/init as init process
May  5 07:05:09 crashlog: <5>UBIFS (ubi0:10): background thread "ubifs_bgt0_10" started, PID 213
May  5 07:05:09 crashlog: <5>UBIFS (ubi0:10): UBIFS: mounted UBI device 0, volume 10, name "data"
May  5 07:05:09 crashlog: <5>UBIFS (ubi0:10): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
May  5 07:05:09 crashlog: <5>UBIFS (ubi0:10): FS size: 19808256 bytes (18 MiB, 156 LEBs), journal size 1015809 bytes (0 MiB, 8 LEBs)
May  5 07:05:09 crashlog: <5>UBIFS (ubi0:10): reserved for root: 935592 bytes (913 KiB)
May  5 07:05:09 crashlog: <5>UBIFS (ubi0:10): media format: w5/r0 (latest is w5/r0), UUID F9D4EE6A-99CB-4B8A-B617-D978EDA3716A, small LPT model
May  5 07:05:09 crashlog: <5>UBIFS (ubi0:11): background thread "ubifs_bgt0_11" started, PID 229
May  5 07:05:09 crashlog: <5>UBIFS (ubi0:11): UBIFS: mounted UBI device 0, volume 11, name "defaults"
May  5 07:05:09 crashlog: <5>UBIFS (ubi0:11): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
May  5 07:05:09 crashlog: <5>UBIFS (ubi0:11): FS size: 7237632 bytes (6 MiB, 57 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs)
May  5 07:05:09 crashlog: <5>UBIFS (ubi0:11): reserved for root: 341850 bytes (333 KiB)
May  5 07:05:09 crashlog: <5>UBIFS (ubi0:11): media format: w5/r0 (latest is w5/r0), UUID AE50FBA1-83AF-4C14-B6B2-E5477F6AE6FC, small LPT model
May  5 07:05:09 crashlog: <5>UBIFS (ubi0:13): background thread "ubifs_bgt0_13" started, PID 259
May  5 07:05:09 crashlog: <5>UBIFS (ubi0:13): UBIFS: mounted UBI device 0, volume 13, name "jffs2"
May  5 07:05:09 crashlog: <5>UBIFS (ubi0:13): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
May  5 07:05:09 crashlog: <5>UBIFS (ubi0:13): FS size: 51171328 bytes (48 MiB, 403 LEBs), journal size 2539520 bytes (2 MiB, 20 LEBs)
May  5 07:05:09 crashlog: <5>UBIFS (ubi0:13): reserved for root: 2416947 bytes (2360 KiB)
May  5 07:05:09 crashlog: <5>UBIFS (ubi0:13): media format: w5/r0 (latest is w5/r0), UUID 94B82B6B-B608-4B7C-B965-2FB37AA12F49, small LPT model
May  5 07:05:09 crashlog: <4>wlcsm: module license 'Proprietary' taints kernel.
May  5 07:05:09 crashlog: <4>Disabling lock debugging due to kernel taint
May  5 07:05:09 crashlog: <6>Initializing WLCSM Module
May  5 07:05:09 crashlog: <6>WLCSM Module loaded successfully
May  5 07:05:09 crashlog: <7>mtdoops: ready 0, 1 (no erase)
May  5 07:05:09 crashlog: <6>mtdoops: Attached to MTD device 3
May  5 07:05:09 crashlog: <4>BCMLIBS loaded...
May  5 07:05:09 crashlog: <4>^[[0;36;44mBroadcom MPM Driver Intializing^[[0m
May  5 07:05:09 crashlog: <4>MPM: virt_base = 0xffffff800b052000, phy_base = 0x35000000, total_mem_size = 134217728
May  5 07:05:09 crashlog: <4>MPM: ebuf_size = 512, ebuf_total = 262144/262144
May  5 07:05:09 crashlog: <4>Pool[0]: alloc 1 EBUFs (512 bytes)
May  5 07:05:09 crashlog: <4>Pool[1]: alloc 2 EBUFs (1024 bytes)
May  5 07:05:09 crashlog: <4>Pool[2]: alloc 4 EBUFs (2048 bytes)
May  5 07:05:09 crashlog: <4>Pool[3]: alloc 8 EBUFs (4096 bytes)
May  5 07:05:09 crashlog: <4>MPM Pool Numbers: SKB = 0, Data = 3, DQM = 2
May  5 07:05:09 crashlog: <4>MPM Total Commands = 41/64
May  5 07:05:09 crashlog: <4>MPM: ebuf_size 1, mpm_size_log2_kb 8
May  5 07:05:09 crashlog: <4>MPM Enabled
May  5 07:05:09 crashlog: <4>^[[0;36;44mBroadcom HW Memory Pool Manager (MPM) Char Driver v0.1 Registered <342>^[[0m
May  5 07:05:09 crashlog: <4>Broadcom BPM Module Char Driver v0.1 Registered<304>^[[0m
May  5 07:05:09 crashlog: <4>Scratch pad is not initialized.
May  5 07:05:09 crashlog: <4>Scratch pad is not initialized.
May  5 07:05:09 crashlog: <4>Scratch pad is not initialized.
May  5 07:05:09 crashlog: <4>Scratch pad is not initialized.
May  5 07:05:09 crashlog: <4>Scratch pad is not initialized.
May  5 07:05:09 crashlog: <4>Scratch pad is not initialized.
May  5 07:05:09 crashlog: <4>^[[0;34m[NTC bpm] bpm_init_buf_pool: buf_top_idx:11184^[[0m
May  5 07:05:09 crashlog: <4>^[[0;34m[NTC bpm] bpm_init_skb_pool: skbs pool inited total 11184^[[0m
May  5 07:05:09 crashlog: <6>Broadcom 802.1Q VLAN Interface, v0.1
May  5 07:05:09 crashlog: <4>Scratch pad is not initialized.
May  5 07:05:09 crashlog: <4>rdpa_get_init_system_dt_params: emac_map=3f ext_sw_pid=30 wan_emac=12 usxgmiim_cnt=0
May  5 07:05:09 crashlog: <4>Scratch pad is not initialized.
May  5 07:05:09 crashlog: <4>mpm_alloc_ring_alloc: Host 0xffffffc032763000 (0xffffffc032763000), Phys 0x32763000 (0x32763000), Size 128 (192) bytes
May  5 07:05:09 crashlog: <4>mpm_alloc_ring_alloc: alloc_ring 0, buf_mode FKB (0), buf_type 0
May  5 07:05:09 crashlog: <4>mpm_free_ring_alloc: Host 0xffffffc031a6e000 (0xffffffc031a6e000), Phys 0x31a6e000 (0x31a6e000), Size 128 (192) bytes
May  5 07:05:09 crashlog: <4>mpm_free_ring_alloc: free_ring 0
May  5 07:05:09 crashlog: <4>Creating CPU ring for queue number 17 with 32768 packets descriptor=0xffffff8000d47540, size_of_entry 8
May  5 07:05:09 crashlog: <4>Done initializing Ring 17 Base=0xffffffc02f280000 num of entries= 32768 RDD Base=2f280000 descriptor=0xffffff8000d47540
May  5 07:05:09 crashlog: <4>Creating CPU ring for queue number 18 with 16384 packets descriptor=0xffffff8000d475c0, size_of_entry 8
May  5 07:05:09 crashlog: <4>Done initializing Ring 18 Base=0xffffffc02f300000 num of entries= 16384 RDD Base=2f300000 descriptor=0xffffff8000d475c0
May  5 07:05:09 crashlog: <4>Creating CPU ring for queue number 16 with 32768 packets descriptor=0xffffff8000d474c0, size_of_entry 8
May  5 07:05:09 crashlog: <4>Done initializing Ring 16 Base=0xffffffc02f380000 num of entries= 32768 RDD Base=2f380000 descriptor=0xffffff8000d474c0
May  5 07:05:09 crashlog: <4>Creating CPU ring for queue number 19 with 2048 packets descriptor=0xffffff8000d47640, size_of_entry 16
May  5 07:05:09 crashlog: <4>Done initializing Ring 19 Base=0xffffffc02a310000 num of entries= 2048 RDD Base=2a310000 descriptor=0xffffff8000d47640
May  5 07:05:09 crashlog: <4>Creating CPU ring for queue number 20 with 2048 packets descriptor=0xffffff8000d476c0, size_of_entry 16
May  5 07:05:09 crashlog: <4>Done initializing Ring 20 Base=0xffffffc02a320000 num of entries= 2048 RDD Base=2a320000 descriptor=0xffffff8000d476c0
May  5 07:05:09 crashlog: <4>License chip name: 4912 serial number: 000000000000000000000000
May  5 07:05:09 crashlog: <4>brcmchipinfo: brcm_chipinfo_init entry
May  5 07:05:09 crashlog: <4>Broadcom Ingress QoS Module  Char Driver v1.0 Registered<303>^[[0m
May  5 07:05:09 crashlog: <4>
May  5 07:05:09 crashlog: <4>Broadcom Ingress QoS v1.0 initialized
May  5 07:05:09 crashlog: <4>^[[0;36;44mBroadcom Packet Flow Cache ^[[0m
May  5 07:05:09 crashlog: <4>FCACHE_CONFIG_MAX_UCAST_FLOW_ENTRIES<16384>
May  5 07:05:09 crashlog: <4>FCACHE_CONFIG_MAX_MCAST_GROUPS<128>
May  5 07:05:09 crashlog: <4>FCACHE_CONFIG_MAX_MCAST_CLIENTS_PER_GROUP<64>
May  5 07:05:09 crashlog: <4>FCACHE_CONFIG_MAX_MCAST_CLIENTS<1024>
May  5 07:05:09 crashlog: <4>FCACHE_CONFIG_MAX_FDB_ENTRIES<1024>
May  5 07:05:09 crashlog: <4>FCACHE_CONFIG_MAX_HOST_DEV_ENTRIES<64>
May  5 07:05:09 crashlog: <4>FCACHE_CONFIG_MAX_HOST_MAC_ENTRIES<32>
May  5 07:05:09 crashlog: <4>npe_max_entries<35072>
May  5 07:05:09 crashlog: <4>Bind blog_notify_evt_enqueue_fn[<ffffff8000ec9af0>]
May  5 07:05:09 crashlog: <4>fc_evt task created successfully
May  5 07:05:09 crashlog: <4>max_ent = 17536 intvl_msec = 10000 num_slices = 2000 num_ent = 9 period_msec = 5
May  5 07:05:09 crashlog: <4>NBUFF v1.0 Initialized
May  5 07:05:09 crashlog: <4>fcache: mcast_max_groups<128> mcast_max_clients_per_group<64> mcast_max_clients<1024>
May  5 07:05:09 crashlog: <4>fcache: mcast_max_ent<1152>
May  5 07:05:09 crashlog: <4>fcache: ucast_max_ent<16384>
May  5 07:05:09 crashlog: <4>fcache: max_ent<17536>
May  5 07:05:09 crashlog: <4>^[[0;36;44mTotal # of labels = 77^[[0m
#0 at address 6
May  5 07:05:09 crashlog: <4>INFO MerlinSupport::_merlin_core_power_op(): START powering up Merlin Core #0 with PRTAD = 6, ln_offset_stap = 0
May  5 07:05:09 crashlog: <4>INFO MerlinSupport::_merlin_core_power_op(): Disable IDDQ
May  5 07:05:09 crashlog: <4>INFO MerlinSupport::_merlin_core_power_op(): Provide a delay of 1ms after IDDQ is de-asserted
May  5 07:05:09 crashlog: <4>INFO MerlinSupport::_merlin_core_power_op(): Disable serdes_reset and refclk_reset
May  5 07:05:09 crashlog: <4>INFO MerlinSupport::_merlin_core_power_op: assert IDDQ|RESET|REFCLK_RESET to power down Serdes
May  5 07:05:09 crashlog: <4>INFO MerlinSupport::_merlin_core_power_op(): START powering up Merlin Core #0 with PRTAD = 6, ln_offset_stap = 0
May  5 07:05:09 crashlog: <4>INFO MerlinSupport::_merlin_core_power_op(): Disable IDDQ
May  5 07:05:09 crashlog: <4>INFO MerlinSupport::_merlin_core_power_op(): Provide a delay of 1ms after IDDQ is de-asserted
May  5 07:05:09 crashlog: <4>INFO MerlinSupport::_merlin_core_power_op(): Disable serdes_reset and refclk_reset
May  5 07:05:09 crashlog: <4>Toggle Serdes Core #0 PMD and uC reset.
May  5 07:05:09 crashlog: <4>INFO MerlinSupport::merlin_core_init(): END. Core #0 with PRTAD = 6, ln_offset_stap = 0
May  5 07:05:09 crashlog: <4>MerlinSupport::merlin16_serdes_init(): Step 4. Assert micro reset
May  5 07:05:09 crashlog: <4>MerlinSupport::merlin16_serdes_init(): Step 6. Micro code load and verify
May  5 07:05:09 crashlog: <4>MerlinSupport::merlin_load_firmware(): INFO: Start to download firmware to core #   0
May  5 07:05:09 crashlog: <4>MerlinSupport::merlin_load_firmware():  Checking init_done initial value passed...
May  5 07:05:09 crashlog: <4>MerlinSupport::merlin_load_firmware():  INFO: wait 8192 comclks for ~32KB code ram initialization...
May  5 07:05:09 crashlog: <4>MerlinSupport::merlin_load_firmware():  Checking init_done passed ...
May  5 07:05:09 crashlog: <4>MerlinSupport::merlin_load_firmware():  INFO: wait 1024 comclks for 3KB data ram initialization...
May  5 07:05:09 crashlog: <4>MerlinSupport::merlin_load_firmware():  Checking init_done passed ...
May  5 07:05:09 crashlog: <4>MerlinSupport::merlin_load_firmware():  begin writing firmware to the program ram ...
May  5 07:05:09 crashlog: <4>#################################################################################
May  5 07:05:09 crashlog: <4>Done.
May  5 07:05:09 crashlog: <4>MerlinSupport::merlin_load_firmware():  end writing firmware to the program ram ...
May  5 07:05:09 crashlog: <4>MerlinSupport::merlin16_serdes_init(): Step 6.1 De-assert micro reset
May  5 07:05:09 crashlog: <4>MerlinSupport::merlin_wait_uc_active():    wait 50us comclks for micro to be up...
May  5 07:05:09 crashlog: <4>MerlinSupport::merlin_wait_uc_active():  Checking uc_active passed ...
May  5 07:05:09 crashlog: <4>MerlinSupport::merlin_wait_uc_active():  micro is ready for command ...
May  5 07:05:09 crashlog: <4>MerlinSupport::merlin_wait_uc_crc_verify():  micro is ready for command ...
May  5 07:05:09 crashlog: <4>MerlinSupport::merlin_wait_uc_crc_verify(): DSC ready for command is not working; SerDes is probably reset!!! reset_state = 7
May  5 07:05:09 crashlog: <4>MerlinSupport::merlin_wait_uc_crc_verify():  uCode CRC Verify ...
May  5 07:05:09 crashlog: <4>MerlinSupport::merlin_wait_uc_crc_verify():  wait 500us for crc verify to be done ...
May  5 07:05:09 crashlog: <4>already waiting 1 ms
May  5 07:05:09 crashlog: <4>already waiting 2 ms
May  5 07:05:09 crashlog: <4>already waiting 3 ms
May  5 07:05:09 crashlog: <4>already waiting 4 ms
May  5 07:05:09 crashlog: <4>already waiting 5 ms
May  5 07:05:09 crashlog: <4>already waiting 6 ms
May  5 07:05:09 crashlog: <4>already waiting 7 ms
May  5 07:05:09 crashlog: <4>MerlinSupport::merlin_wait_uc_crc_verify():  CRC verification passed ...
May  5 07:05:09 crashlog: <4>MerlinSupport::merline_speed_set_core(): Step 7 Config Speed to 2
May  5 07:05:09 crashlog: <4>No option found for: "-d ML_C_VCO_10P3125", added default value 0 in index 9
May  5 07:05:09 crashlog: <4>--- Step 8 PLL/PMD setup configuration for speed 0, mode 1.
May  5 07:05:09 crashlog: <4>MerlinSupport::merline_speed_set_core(): PMD Setup 50MHz, 10.3125GHz VCO programming
May  5 07:05:09 crashlog: <4>MerlinSupport::merlin_wait_uc_active():    wait 50us comclks for micro to be up...
May  5 07:05:09 crashlog: <4>MerlinSupport::merlin_wait_uc_active():  Checking uc_active passed ...
May  5 07:05:09 crashlog: <4>MerlinSupport::merlin_wait_uc_active():  micro is ready for command ...
May  5 07:05:09 crashlog: <4>MerlinSupport::merline_speed_set_core(): Step 9. Configure Core level regsiter
May  5 07:05:09 crashlog: <4>MerlinSupport::merline_speed_set_core(): Step 10. Set core_congif_from_pcs
May  5 07:05:09 crashlog: <4>No option found for: "-d ML_C_VCO_12P5", added default value 0 in index 10
May  5 07:05:09 crashlog: <4>MerlinSupport::merline_speed_set_core(): RAM variable vco_rate is 19
May  5 07:05:09 crashlog: <4>MerlinSupport::merlin_cfg_core_ram_var():  program core_config_word 0x26 to ram address 0x20000200 ...
May  5 07:05:09 crashlog: <4>MerlinSupport::merline_speed_set_core(): Step 12. Reset Datapath (core)
May  5 07:05:09 crashlog: <4>MerlinSupport::merlin_reset_datapath_core(): Datapath Reset (core) in progress
May  5 07:05:09 crashlog: <4>MerlinSupport::merline_speed_set_core(): Step 13. Lane Configuration
May  5 07:05:09 crashlog: <4>MerlinSupport::merline_speed_set_core(): Step 13.a. Configure lane registers
May  5 07:05:09 crashlog: <4>MerlinSupport::merline_speed_set_core(): RAM variable an_enabled is 0
May  5 07:05:09 crashlog: <4>MerlinSupport::merlin_cfg_lane_ram_var():  program lane_config_word 0x0 to ram address 0x20000300 ...
May  5 07:05:09 crashlog: <4>MerlinSupport::merlin_lane_config_speed(#2):
May  5 07:05:09 crashlog: <4>MerlinSupport::CONFIGURING FOR FORCE 1G
May  5 07:05:09 crashlog: <4>MerlinSupport::merlin_lane_config_speed(): Core #0 Lane #0 PMD Lock Speed Up programming
May  5 07:05:09 crashlog: <4>INFO MerlinSupport::merlin_lane_config_speed(): END Merlin core #0 lane #0 Initialization procedure
May  5 07:05:09 crashlog: <4>MerlinSupport::merlin_chk_pll_lock(): Checking Core #0 PLL Lock Status
May  5 07:05:09 crashlog: <4>MerlinSupport::merlin_chk_pll_lock(): PLL Locked
May  5 07:05:09 crashlog: <4>INFO MerlinSupport::merlin16_serdes_init(): END Merlin Initialization procedure
May  5 07:05:09 crashlog: <4>MerlinSupport::merline_speed_set_core(): Step 7 Config Speed to 2
May  5 07:05:09 crashlog: <4>--- Step 8 PLL/PMD setup configuration for speed 0, mode 13.
May  5 07:05:09 crashlog: <4>MerlinSupport::merline_speed_set_core(): PMD Setup 50MHz, 10.3125GHz VCO programming
May  5 07:05:09 crashlog: <4>MerlinSupport::merlin_wait_uc_active():    wait 50us comclks for micro to be up...
May  5 07:05:09 crashlog: <4>MerlinSupport::merlin_wait_uc_active():  Checking uc_active passed ...
May  5 07:05:09 crashlog: <4>MerlinSupport::merlin_wait_uc_active():  micro is ready for command ...
May  5 07:05:09 crashlog: <4>MerlinSupport::merline_speed_set_core(): Step 9. Configure Core level regsiter
May  5 07:05:09 crashlog: <4>MerlinSupport::merline_speed_set_core(): Step 10. Set core_congif_from_pcs
May  5 07:05:09 crashlog: <4>MerlinSupport::merline_speed_set_core(): RAM variable vco_rate is 19
May  5 07:05:09 crashlog: <4>MerlinSupport::merlin_cfg_core_ram_var():  program core_config_word 0x26 to ram address 0x20000200 ...
May  5 07:05:09 crashlog: <4>MerlinSupport::merline_speed_set_core(): Step 12. Reset Datapath (core)
May  5 07:05:09 crashlog: <4>MerlinSupport::merlin_reset_datapath_core(): Datapath Reset (core) in progress
May  5 07:05:09 crashlog: <4>MerlinSupport::merline_speed_set_core(): Step 13. Lane Configuration
May  5 07:05:09 crashlog: <4>MerlinSupport::merline_speed_set_core(): Step 13.a. Configure lane registers
May  5 07:05:09 crashlog: <4>MerlinSupport::merline_speed_set_core(): RAM variable an_enabled is 0
May  5 07:05:09 crashlog: <4>MerlinSupport::merlin_cfg_lane_ram_var():  program lane_config_word 0x0 to ram address 0x20000300 ...
May  5 07:05:09 crashlog: <4>MerlinSupport::merlin_lane_config_speed(#2):
May  5 07:05:09 crashlog: <4>MerlinSupport::CONFIGURING FOR FORCE 1G
May  5 07:05:09 crashlog: <4>MerlinSupport::merlin_lane_config_speed(): Core #0 Lane #0 PMD Lock Speed Up programming
May  5 07:05:09 crashlog: <4>INFO MerlinSupport::merlin_lane_config_speed(): END Merlin core #0 lane #0 Initialization procedure
May  5 07:05:09 crashlog: <4>MerlinSupport::merlin_chk_pll_lock(): Checking Core #0 PLL Lock Status
May  5 07:05:09 crashlog: <4>MerlinSupport::merlin_chk_pll_lock(): PLL Locked
May  5 07:05:09 crashlog: <4>^[[0;30;102m=== End of 10G Active Ethernet Initialization for core 0 port 0 ===^[[0m
May  5 07:05:09 crashlog: <4>phy 0x11 is macsec capable, initializing macsec module
May  5 07:05:09 crashlog: <4>MACSEC: macsec init DONE
May  5 07:05:09 crashlog: <4>ephy_leds_init SW 0 Port 5 led idx 5 configured as:
May  5 07:05:09 crashlog: <4>led ctrl 0x00000003 encode 0x0003b6ff encode sel 0x00004900
May  5 07:05:09 crashlog: <4>BCMENET: Enabling Software GSO for eth5
May  5 07:05:09 crashlog: <4>Creating CPU ring for queue number 4 with 1024 packets descriptor=0xffffff8000d46ec0, size_of_entry 16
May  5 07:05:09 crashlog: <4>Done initializing Ring 4 Base=0xffffffc029328000 num of entries= 1024 RDD Base=29328000 descriptor=0xffffff8000d46ec0
May  5 07:05:09 crashlog: <4>Creating CPU ring for queue number 3 with 1024 packets descriptor=0xffffff8000d46e40, size_of_entry 16
May  5 07:05:09 crashlog: <4>Done initializing Ring 3 Base=0xffffffc029330000 num of entries= 1024 RDD Base=29330000 descriptor=0xffffff8000d46e40
May  5 07:05:09 crashlog: <4>eth0      : Down          A0:36:BC:B0:D4:98 IntSw:P0 Lgcl: 0 LAN PHY_ID:0x01:OnChip       NoApd    PwrDn       1 Gbps        EGPHY Cfg: ANG.  1 Gbps;             Down                   Unknown
May  5 07:05:09 crashlog: <4>eth1      : Down          A0:36:BC:B0:D4:98 IntSw:P1 Lgcl: 1 LAN PHY_ID:0x02:OnChip       NoApd    PwrDn       1 Gbps        EGPHY Cfg: ANG.  1 Gbps;             Down                   Unknown
May  5 07:05:09 crashlog: <4>eth2      : Down          A0:36:BC:B0:D4:98 IntSw:P2 Lgcl: 2 LAN PHY_ID:0x03:OnChip       NoApd    PwrDn       1 Gbps        EGPHY Cfg: ANG.  1 Gbps;             Down                   Unknown
May  5 07:05:09 crashlog: <4>eth3      : Down          A0:36:BC:B0:D4:98 IntSw:P3 Lgcl: 3 LAN PHY_ID:0x04:OnChip       NoApd    PwrDn       1 Gbps        EGPHY Cfg: ANG.  1 Gbps;             Down                   U
May  5 07:05:09 crashlog: <4>nknown
May  5 07:05:09 crashlog: <4>eth4      : Down          A0:36:BC:B0:D4:98 IntSw:P4 Lgcl: 4 LAN PHY_ID:0x19:Extrnl RGMII NoApd    PwrDn       1 Gbps        EGPHY Cfg: ANG.  1 Gbps;             Down                   Unknown
May  5 07:05:09 crashlog: <4>eth5      : Down          A0:36:BC:B0:D4:98 IntSw:P5 Lgcl: 5 LAN     S1K2KR
May  5 07:05:09 crashlog: <4>            PHY_ID:0x06:OnChip       ApdOn    PwrDn      10 Gbps   10GAE#L0.0 Cfg: ANG. 10 Gbps;             Down                      AUS1KR2KRX5KRX10R:              S1K2KR:           SGMII
May  5 07:05:09 crashlog: <4>            PHY_ID:0x11:Extrnl Cscde ApdOn    PwrDn      10 Gbps  4912M       Cfg: ANG.2.5 Gbps;             Down                                S1K2KIR:              S1K2KR:          Uknown
May  5 07:05:09 crashlog: <4>dgasp: kerSysRegisterDyingGaspHandler: bcmsw registered
May  5 07:05:09 crashlog: <3>bcm_enet_init_post:L2413 ENET system contructed and configured enet-kthrd thread
May  5 07:05:09 crashlog: <3>enet_kthread_handler:L297 Instantiating ENET thread
May  5 07:05:09 crashlog: <4>^[[0;34m[NTC bitpool] idx_pool_init: 551:PktRnr[0]:Create Index Pool_Size = 17408^[[0m
May  5 07:05:09 crashlog: <4>^[[0;34m[NTC bitpool] idx_pool_init: 551:L2L3-ucast:Create Index Pool_Size = 32768^[[0m
May  5 07:05:09 crashlog: <4>Initialized Runner Host Layer
May  5 07:05:09 crashlog: <4>Initialized Runner Unicast Layer
May  5 07:05:09 crashlog: <4>Initialized Runner L2 Unicast Layer
May  5 07:05:09 crashlog: <4>^[[0;34m[NTC bitpool] idx_pool_init: 551:mcast:Create Index Pool_Size = 1152^[[0m
May  5 07:05:09 crashlog: <4>IPTV ddr base addr: 0x0000000028ca0000
May  5 07:05:09 crashlog: <4>IPTV virtual ddr base addr: ffffffc028ca0000
May  5 07:05:09 crashlog: <4>Initialized Runner Multicast Layer
May  5 07:05:09 crashlog: <4>^[[0;34m[NTC bitpool] idx_pool_init: 551:mcast_whitelist:Create Index Pool_Size = 1024^[[0m
May  5 07:05:09 crashlog: <4>Initialized Runner Multicast Layer
May  5 07:05:09 crashlog: <4>^[[0;34m[NTC bitpool] idx_pool_init: 551:PktRnr[1]:Create Index Pool_Size = 1024^[[0m
May  5 07:05:09 crashlog: <4>^[[0;34m[NTC bitpool] idx_pool_init: 551:FHW[0]:Create Index Pool_Size = 17408^[[0m
May  5 07:05:09 crashlog: <4>Retrieve num_fhw_path=64
May  5 07:05:09 crashlog: <4>^[[0;36;44mPathstats allocated 2048 bytes^[[0m
May  5 07:05:09 crashlog: <4>^[[0;36;44mBroadcom Packet Flow Cache HW acceleration enabled.^[[0m
May  5 07:05:09 crashlog: <4>Enabled Runner binding to Flow Cache
May  5 07:05:09 crashlog: <4>Initialized Runner Protocol Layer (1250)
May  5 07:05:09 crashlog: <4>PKTRUNNER : RDPA system init gbe_wan_emac=12 isRdpaGbeWanConfigured=0
May  5 07:05:09 crashlog: <4>Broadcom Runner Blog Driver Char Driver v0.1 Registered <309>
May  5 07:05:09 crashlog: <4>bcm_mcast_init successful
May  5 07:05:09 crashlog: <4>Broadcom PCIe Host Controller Driver (impl1)^M
May  5 07:05:09 crashlog: <4>  bcm-pcie: DEF CFG: ssc 0x0, speed  0x0, bootorder 0x0, apon 0x0
May  5 07:05:09 crashlog: <4>  bcm-pcie:        : pwr 0x0, errlog 0x1111, msi 0x1111, acc  0x1111, pllclkid 0x3210
May  5 07:05:09 crashlog: <4>  bcm-pcie:        : loglevel 0x1 pllclkadj 0x0
May  5 07:05:09 crashlog: <4>  bcm-pcie: Core [1] DT node available: pcie1
May  5 07:05:09 crashlog: <6>bcm-pcie 80090000.pcie1: PCI host bridge to bus 0000:00
May  5 07:05:09 crashlog: <6>pci_bus 0000:00: root bus resource [mem 0xd0000000-0xdfffffff]
May  5 07:05:09 crashlog: <6>pci_bus 0000:00: root bus resource [bus 00-0f]
May  5 07:05:09 crashlog: <4>  bcm-pcie: found Port [1] GEN3 Core Rev [4.03] with 2 Lanes^M
May  5 07:05:09 crashlog: <4>  bcm-pcie: Port [1] using 16FFC Viper Serdes
May  5 07:05:09 crashlog: <4>GetRCalSetting_1UM_VERT: Skipping SW RCAL as RCAL_1UM_VERT is not defined
May  5 07:05:09 crashlog: <4>  bcm-pcie: Core [1] Link UP - [2] lanes, [GEN2] speed^M
May  5 07:05:09 crashlog: <4>  bcm-pcie: Core [1] Enabled PCIE/UBUS Error Interrupts^M
May  5 07:05:09 crashlog: <4>  bcm-pcie: Core [1] UBUS Intr [UBUS_LINKUP]^M
May  5 07:05:09 crashlog: <7>pci 0000:00:00.0: [14e4:0491] type 01 class 0x060400
May  5 07:05:09 crashlog: <7>pci 0000:00:00.0: PME# supported from D0 D3hot
May  5 07:05:09 crashlog: <6>pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
May  5 07:05:09 crashlog: <7>pci 0000:01:00.0: [14e4:6715] type 00 class 0x028000
May  5 07:05:09 crashlog: <7>pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x0000ffff 64bit]
May  5 07:05:09 crashlog: <7>pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x007fffff 64bit]
May  5 07:05:09 crashlog: <7>pci 0000:01:00.0: reg 0x20: [mem 0x00000000-0x000fffff 64bit pref]
May  5 07:05:09 crashlog: <7>pci 0000:01:00.0: supports D1 D2
May  5 07:05:09 crashlog: <7>pci 0000:00:00.0: Checking PCIe ASPM for vendor 14e4 device 6715
May  5 07:05:09 crashlog: <7>pci 0000:00:00.0: Disabling PCIe ASPM for vendor 14e4 device 6715
May  5 07:05:09 crashlog: <7>pci_bus 0000:01: busn_res: [bus 01-0f] end is updated to 01
May  5 07:05:09 crashlog: <6>pci 0000:00:00.0: BAR 8: assigned [mem 0xd0000000-0xd0bfffff]
May  5 07:05:09 crashlog: <6>pci 0000:00:00.0: BAR 9: assigned [mem 0xd0c00000-0xd0cfffff 64bit pref]
May  5 07:05:09 crashlog: <6>pci 0000:01:00.0: BAR 2: assigned [mem 0xd0000000-0xd07fffff 64bit]
May  5 07:05:09 crashlog: <6>pci 0000:01:00.0: BAR 4: assigned [mem 0xd0c00000-0xd0cfffff 64bit pref]
May  5 07:05:09 crashlog: <6>pci 0000:01:00.0: BAR 0: assigned [mem 0xd0800000-0xd080ffff 64bit]
May  5 07:05:09 crashlog: <6>pci 0000:00:00.0: PCI bridge to [bus 01]
May  5 07:05:09 crashlog: <6>pci 0000:00:00.0:   bridge window [mem 0xd0000000-0xd0bfffff]
May  5 07:05:09 crashlog: <6>pci 0000:00:00.0:   bridge window [mem 0xd0c00000-0xd0cfffff 64bit pref]
May  5 07:05:09 crashlog: <6>pcieport 0000:00:00.0: enabling device (0000 -> 0002)
May  5 07:05:09 crashlog: <6>pcieport 0000:00:00.0: Max Payload Size set to  512/ 512 (was  128), Max Read Rq  512
May  5 07:05:09 crashlog: <6>pci 0000:01:00.0: Max Payload Size set to  512/ 512 (was  128), Max Read Rq  512
May  5 07:05:09 crashlog: <4>  bcm-pcie: Core [3] DT node available: pcie3
May  5 07:05:09 crashlog: <6>bcm-pcie 800b0000.pcie3: PCI host bridge to bus 0001:00
May  5 07:05:09 crashlog: <6>pci_bus 0001:00: root bus resource [mem 0xa0000000-0xbfffffff]
May  5 07:05:09 crashlog: <6>pci_bus 0001:00: root bus resource [bus 00-0f]
May  5 07:05:09 crashlog: <4>  bcm-pcie: found Port [3] GEN3 Core Rev [4.03] with 1 Lanes^M
May  5 07:05:09 crashlog: <4>  bcm-pcie: Port [3] using 16FFC Viper Serdes
May  5 07:05:09 crashlog: <4>GetRCalSetting_1UM_VERT: Skipping SW RCAL as RCAL_1UM_VERT is not defined
May  5 07:05:09 crashlog: <4>  bcm-pcie: Core [3] Link UP - [1] lanes, [GEN2] speed^M
May  5 07:05:09 crashlog: <4>  bcm-pcie: Core [3] Enabled PCIE/UBUS Error Interrupts^M
May  5 07:05:09 crashlog: <4>  bcm-pcie: Core [3] UBUS Intr [UBUS_LINKUP]^M
May  5 07:05:09 crashlog: <7>pci 0001:00:00.0: [14e4:0491] type 01 class 0x060400
May  5 07:05:09 crashlog: <7>pci 0001:00:00.0: PME# supported from D0 D3hot
May  5 07:05:09 crashlog: <6>pci 0001:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
May  5 07:05:09 crashlog: <7>pci 0001:01:00.0: [14e4:6710] type 00 class 0x028000
May  5 07:05:09 crashlog: <7>pci 0001:01:00.0: reg 0x10: [mem 0x00000000-0x0000ffff 64bit]
May  5 07:05:09 crashlog: <7>pci 0001:01:00.0: reg 0x18: [mem 0x00000000-0x007fffff 64bit]
May  5 07:05:09 crashlog: <7>pci 0001:01:00.0: reg 0x20: [mem 0x00000000-0x000fffff 64bit pref]
May  5 07:05:09 crashlog: <7>pci 0001:01:00.0: supports D1 D2
May  5 07:05:09 crashlog: <7>pci 0001:00:00.0: Checking PCIe ASPM for vendor 14e4 device 6710
May  5 07:05:09 crashlog: <7>pci 0001:00:00.0: Disabling PCIe ASPM for vendor 14e4 device 6710
May  5 07:05:09 crashlog: <7>pci_bus 0001:01: busn_res: [bus 01-0f] end is updated to 01
May  5 07:05:09 crashlog: <6>pci 0001:00:00.0: BAR 8: assigned [mem 0xa0000000-0xa0bfffff]
May  5 07:05:09 crashlog: <6>pci 0001:00:00.0: BAR 9: assigned [mem 0xa0c00000-0xa0cfffff 64bit pref]
May  5 07:05:09 crashlog: <6>pci 0001:01:00.0: BAR 2: assigned [mem 0xa0000000-0xa07fffff 64bit]
May  5 07:05:09 crashlog: <6>pci 0001:01:00.0: BAR 4: assigned [mem 0xa0c00000-0xa0cfffff 64bit pref]
May  5 07:05:09 crashlog: <6>pci 0001:01:00.0: BAR 0: assigned [mem 0xa0800000-0xa080ffff 64bit]
May  5 07:05:09 crashlog: <6>pci 0001:00:00.0: PCI bridge to [bus 01]
May  5 07:05:09 crashlog: <6>pci 0001:00:00.0:   bridge window [mem 0xa0000000-0xa0bfffff]
May  5 07:05:09 crashlog: <6>pci 0001:00:00.0:   bridge window [mem 0xa0c00000-0xa0cfffff 64bit pref]
May  5 07:05:09 crashlog: <6>pcieport 0001:00:00.0: enabling device (0000 -> 0002)
May  5 07:05:09 crashlog: <6>pcieport 0001:00:00.0: Max Payload Size set to  512/ 512 (was  128), Max Read Rq  512
May  5 07:05:09 crashlog: <6>pci 0001:01:00.0: Max Payload Size set to  512/ 512 (was  128), Max Read Rq  512
May  5 07:05:09 crashlog: <4>^[[1m^[[34mWifi Forwarding Driver is initialized!^[[0m
May  5 07:05:09 crashlog: <6>bcmflex 83800000.spu_flexrm: FlexRM probing...
May  5 07:05:09 crashlog: <6>bcmflex 83800000.spu_flexrm: Device tree specified 4 rings
May  5 07:05:09 crashlog: <6>bcmflex 83800000.spu_flexrm: Device tree specified 2 AEs
May  5 07:05:09 crashlog: <6>bcmflex 83800000.spu_flexrm: in secured transaction mode
May  5 07:05:09 crashlog: <6>bcmflex 83800000.spu_flexrm: HW_INIT_DONE detected
May  5 07:05:09 crashlog: <6>bcmflex 83800000.spu_flexrm: IRQ# 52 requested for ring #0
May  5 07:05:09 crashlog: <6>bcmflex 83800000.spu_flexrm: CPU mask and IRQ affinity for ring0 are set to 1
May  5 07:05:09 crashlog: <6>bcmflex 83800000.spu_flexrm: IRQ# 53 requested for ring #1
May  5 07:05:09 crashlog: <6>bcmflex 83800000.spu_flexrm: CPU mask and IRQ affinity for ring1 are set to 2
May  5 07:05:09 crashlog: <6>bcmflex 83800000.spu_flexrm: IRQ# 54 requested for ring #2
May  5 07:05:09 crashlog: <6>bcmflex 83800000.spu_flexrm: CPU mask and IRQ affinity for ring2 are set to 3
May  5 07:05:09 crashlog: <6>bcmflex 83800000.spu_flexrm: IRQ# 55 requested for ring #3
May  5 07:05:09 crashlog: <6>bcmflex 83800000.spu_flexrm: CPU mask and IRQ affinity for ring3 are set to 1
May  5 07:05:09 crashlog: <6>bcmflex 83800000.spu_flexrm: loaded successfully!
May  5 07:05:09 crashlog: <6>bcmspu: loading driver
May  5 07:05:09 crashlog: <2>broadcomThermalDrv ubus@ff800000:brcm-therm: init (CPU count 4 4 4 4)
May  5 07:05:09 crashlog: <4>brcm_otp_init entry
May  5 07:05:09 crashlog: <6>init (1): drop_caches: 1
May  5 07:05:09 crashlog: <4>emf: Unknown symbol osl_malloc (err -2)
May  5 07:05:09 crashlog: <4>emf: Unknown symbol osl_pktdup_cpy (err -2)
May  5 07:05:09 crashlog: <4>emf: Unknown symbol osl_mfree (err -2)
May  5 07:05:09 crashlog: <4>emf: Unknown symbol linux_pktfree (err -2)
May  5 07:05:09 crashlog: <4>emf: Unknown symbol osl_pktdup (err -2)
May  5 07:05:09 crashlog: <4>igs: Unknown symbol emfc_wmf_scbfind (err -2)
May  5 07:05:09 crashlog: <4>igs: Unknown symbol osl_malloc (err -2)
May  5 07:05:09 crashlog: <4>igs: Unknown symbol emfc_mfdb_ipv6_membership_add (err -2)
May  5 07:05:09 crashlog: <4>igs: Unknown symbol osl_detach (err -2)
May  5 07:05:09 crashlog: <4>igs: Unknown symbol emfc_rtport_del (err -2)
May  5 07:05:09 crashlog: <4>igs: Unknown symbol emfc_igmp_snooper_register (err -2)
May  5 07:05:09 crashlog: <4>igs: Unknown symbol osl_attach (err -2)
May  5 07:05:09 crashlog: <4>igs: Unknown symbol emfc_mfdb_ipv6_membership_del (err -2)
May  5 07:05:09 crashlog: <4>igs: Unknown symbol emfc_wmf_get_igsc (err -2)
May  5 07:05:09 crashlog: <4>igs: Unknown symbol emfc_rtport_add (err -2)
May  5 07:05:09 crashlog: <4>igs: Unknown symbol emfc_igmp_snooper_unregister (err -2)
May  5 07:05:09 crashlog: <4>igs: Unknown symbol emfc_mfdb_membership_del (err -2)
May  5 07:05:09 crashlog: <4>igs: Unknown symbol osl_mfree (err -2)
May  5 07:05:09 crashlog: <4>igs: Unknown symbol emfc_mfdb_membership_add (err -2)
May  5 07:05:09 crashlog: <4>Loading wlshared Module...
May  5 07:05:09 crashlog: <5>cfg80211: Loading compiled-in X.509 certificates for regulatory database
May  5 07:05:09 crashlog: <5>cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
May  5 07:05:09 crashlog: <4>platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
May  5 07:05:09 crashlog: <6>cfg80211: failed to load regulatory.db
May  5 07:05:09 crashlog: <4>Loading HND Module
May  5 07:05:09 crashlog: <4>igs_module_init:840:    IGS 29 create network socket successful
May  5 07:05:09 crashlog: <4>osl_skb_audit: PASS
May  5 07:05:09 crashlog: <4>wl_module_init: passivemode set to 0x1
May  5 07:05:09 crashlog: <4>wl_module_init: txworkq set to 0x0
May  5 07:05:09 crashlog: <4>^[[0;32mwl_pktfwd_sys_init:  ^[[1m^[[34mWL_PKTFWD[1.1.0]^[[0m Success^[[0m
May  5 07:05:09 crashlog: <6>wl 0001:01:00.0: enabling device (0000 -> 0002)
May  5 07:05:09 crashlog: <6>wl0: creating kthread wl0-kthrd
May  5 07:05:09 crashlog: <4>BME Service Initialization
May  5 07:05:09 crashlog: <4>BME: M2M Core id 0x844 rev 129
May  5 07:05:09 crashlog: <4>M2M Service Initialization: M2M_DD_ENAB 0x00000003
May  5 07:05:09 crashlog: <4>M2M: M2M Core id 0x844 rev 129
May  5 07:05:09 crashlog: <4>M2M: SUCCESS eng 0 alloc rings <00000000b968c522,00000000d675e8a0>,00000000fc5207b6 depth 256
May  5 07:05:09 crashlog: <4>M2M: SUCCESS eng 1 alloc rings <00000000cb72a4ca,000000008d6c032c>,00000000f5f40db2 depth 256
May  5 07:05:09 crashlog: <4>M2M: DMA 0 IntRcvLazy 01000000
May  5 07:05:09 crashlog: <4>M2M: DMA 0 RcvCtrl XmtCtrl enabled
May  5 07:05:09 crashlog: <4>M2M: DMA 1 IntRcvLazy 01000000
May  5 07:05:09 crashlog: <4>M2M: DMA 1 RcvCtrl XmtCtrl enabled
May  5 07:05:09 crashlog: <4>wl0: wlc_ap_attach dynamic_ed_thresh_enable = 0
May  5 07:05:09 crashlog: <4>BME:register key<1010802> user RLM sel IDX set 1 mem 2 8 hi 0 0
May  5 07:05:09 crashlog: <4>CSIMON module registered
May  5 07:05:09 crashlog: <4>wfd0-thrd WL 0 FLowControl total<55924> lo<16777> hi<8388> favor prio<4>
May  5 07:05:09 crashlog: <4>^[[0;31mwfd_bind: wfd0-thrd initialized pktlists: radio 0 nodes 1032 xfer wl_pktfwd_xfer_callback+0x0/0x450 [wl]
May  5 07:05:09 crashlog: <4>^[[0m
May  5 07:05:09 crashlog: <4>Creating CPU ring for queue number 5 with 1024 packets descriptor=0xffffff8000d46f40, size_of_entry 16
May  5 07:05:09 crashlog: <4>Done initializing Ring 5 Base=0xffffffc025d88000 num of entries= 1024 RDD Base=25d88000 descriptor=0xffffff8000d46f40
May  5 07:05:09 crashlog: <4>Creating CPU ring for queue number 6 with 1024 packets descriptor=0xffffff8000d46fc0, size_of_entry 16
May  5 07:05:09 crashlog: <4>Done initializing Ring 6 Base=0xffffffc025db0000 num of entries= 1024 RDD Base=25db0000 descriptor=0xffffff8000d46fc0
May  5 07:05:09 crashlog: <4>^[[1m^[[34m wfd_bind: Dev eth1 wfd_idx 0 wl_radio_idx 0 Type skb:sll configured WFD thread wfd0-thrd minQId/maxQId (0/1), status (0) qmask 0x3^[[0m
May  5 07:05:09 crashlog: <4>Instantiating WFD 0 thread
May  5 07:05:09 crashlog: <4>^[[0;32mwl_wfd_bind: wl0 wfd_idx 0 success^[[0m
May  5 07:05:09 crashlog: <4>wfd_registerdevice Successfully registered dev eth6 ifidx 0 wfd_idx 0
May  5 07:05:09 crashlog: <4>eth6: Broadcom BCM6710 802.11 Wireless Controller 17.10.188.6401 (r808804)
May  5 07:05:09 crashlog: <4>dgasp: kerSysRegisterDyingGaspHandler: eth6 registered
May  5 07:05:09 crashlog: <4>DHD_FKB_POOL size is:1280 and entry size:2816
May  5 07:05:09 crashlog: <4>DHD_PKTTAG POOL size is:2592 and entry size:128
May  5 07:05:09 crashlog: <4>^[[0;32mdhd_pktfwd_sys_init:  ^[[1m^[[34mdhd_PKTFWD[1.0.0]^[[0m Success^[[0m
May  5 07:05:09 crashlog: <4>PCI_PROBE:  bus 1, slot 0,vendor 14E4, device 6715(good PCI location)
May  5 07:05:09 crashlog: <6>pcieh 0000:01:00.0: enabling device (0000 -> 0002)
May  5 07:05:09 crashlog: <4>dor1: runner supported ring format types TxP 0x5, RxP 0x3 TxC 0x3 RxC 0x3^M
May  5 07:05:09 crashlog: <4>
May  5 07:05:09 crashlog: <4>dhd_runner_attach: Tx Offload - Enabled, Ring Size = 1024
May  5 07:05:09 crashlog: <4>dhd_runner_attach: Rx Offload - Enabled, Ring Size = 1024
May  5 07:05:09 crashlog: <4>TX wakeup info: reg = <0x82801004>, val = <0x00000006>
May  5 07:05:09 crashlog: <4>RX wakeup info: reg = <0x82801004>, val = <0x0000000d>
May  5 07:05:09 crashlog: <6>CFG80211-ERROR) wl_setup_wiphy :
May  5 07:05:09 crashlog: <4>Registering Vendor80211
May  5 07:05:09 crashlog: <6>CFG80211-ERROR) wl_cfg80211_apply_eventbuffer :
May  5 07:05:09 crashlog: <4>Get event_msgs error (-19)
May  5 07:05:09 crashlog: <6>CFG80211-ERROR) wl_cfg80211_set_cac_state_change_eventbits :
May  5 07:05:09 crashlog: <4>failed to set WLC_E_CAC_STATE_CHANGE bit
May  5 07:05:09 crashlog: <4>dhd_attach(): thread:dhd_watchdog_thread:3cf started
May  5 07:05:09 crashlog: <4>^[[0;31mwfd_bind: wfd1-thrd initialized pktlists: radio 1 nodes 1032 xfer dhd_pktfwd_xfer_callback+0x0/0x8a0 [dhd]
May  5 07:05:09 crashlog: <4>^[[0m
May  5 07:05:09 crashlog: <4>Creating CPU ring for queue number 8 with 1024 packets descriptor=0xffffff8000d470c0, size_of_entry 16
May  5 07:05:09 crashlog: <4>Done initializing Ring 8 Base=0xffffffc025860000 num of entries= 1024 RDD Base=25860000 descriptor=0xffffff8000d470c0
May  5 07:05:09 crashlog: <4>Creating CPU ring for queue number 9 with 1024 packets descriptor=0xffffff8000d47140, size_of_entry 16
May  5 07:05:09 crashlog: <4>Done initializing Ring 9 Base=0xffffffc025868000 num of entries= 1024 RDD Base=25868000 descriptor=0xffffff8000d47140
May  5 07:05:09 crashlog: <4>^[[1m^[[34m wfd_bind: Dev eth1 wfd_idx 1 wl_radio_idx 1 Type fkb:sll configured WFD thread wfd1-thrd minQId/maxQId (0/1), status (0) qmask 0x3^[[0m
May  5 07:05:09 crashlog: <4>Instantiating WFD 1 thread
May  5 07:05:09 crashlog: <4>^[[0;32mdhd_wfd_bind: wl1 wfd_idx 1 success^[[0m
May  5 07:05:09 crashlog: <4>dhdpcie_download_map_bin: ext nvram exists, no srommap!
May  5 07:05:09 crashlog: <4>dor1: MSG Ring format set to 1
May  5 07:05:09 crashlog: <4>dhd_runner_flowmgr_init: dhd1_rnr bootmem addr<ffffff8014755000> size<11534336>
May  5 07:05:09 crashlog: <4>dhd_runner_profile_init: profile = 3 1024/0512 2048/1024 1024/0512 0512/0512 0512/0512
May  5 07:05:09 crashlog: <4>^[[0;33;40mdor1 TxOffl memory: Reserved<11 Mb> Needed<11 Mb>^[[0m
May  5 07:05:09 crashlog: <4>
May  5 07:05:09 crashlog: <4>dor1: using WME AC based flowid allocation
May  5 07:05:09 crashlog: <4>
May  5 07:05:09 crashlog: <4>^[[0;33;40mRunner DHD PCIE: vendor<0x14e4> device<0x6715> bus<1> slot<0>^[[0m
May  5 07:05:09 crashlog: <4>
May  5 07:05:09 crashlog: <4>Initial configuration
May  5 07:05:09 crashlog: <4>=================================
May  5 07:05:09 crashlog: <4>   rx_post_flow_ring_base_addr : ffffffc031946000
May  5 07:05:09 crashlog: <4>   tx_post_flow_ring_base_addr : ffffff801472d000
May  5 07:05:09 crashlog: <4>   rx_complete_flow_ring_base_addr : ffffffc025870000
May  5 07:05:09 crashlog: <4>   tx_complete_flow_ring_base_addr : ffffffc031940000
May  5 07:05:09 crashlog: <4>
May  5 07:05:09 crashlog: <4>   r2d_wr_arr_base_addr : ffffff80197e1000, phys_addr : 0000000026dd0000
May  5 07:05:09 crashlog: <4>   d2r_rd_arr_base_addr : ffffff80197e1802, phys_addr : 0000000026dd0802
May  5 07:05:09 crashlog: <4>   r2d_rd_arr_base_addr : ffffff80197e2000, phys_addr : 0000000026dd1000
May  5 07:05:09 crashlog: <4>   d2r_wr_arr_base_addr : ffffff80197e1c02, phys_addr : 0000000026dd0c02
May  5 07:05:09 crashlog: <4>   tx_post_mgmt_arr_base_addr : ffffff80197e2800, phys_addr : 0000000026dd1800
May  5 07:05:09 crashlog: <4>
May  5 07:05:09 crashlog: <4>   Doorbell Post Wakeup register : phy_addr: 0xd0802160, virt_addr: ffffff80197da160
May  5 07:05:09 crashlog: <4>   Doorbell Complete Wakeup register : phy_addr: 0xd0802164, virt_addr: ffffff80197da164
May  5 07:05:09 crashlog: <4>   Doorbell ISR : ffffff80019ffe70
May  5 07:05:09 crashlog: <4>   Doorbell CTX : ffffffc0268c7400
May  5 07:05:09 crashlog: <4>   add_llcsnap_header : 1
May  5 07:05:09 crashlog: <4>   flow_ring_format : 1
May  5 07:05:09 crashlog: <4>   idma_active : 1
May  5 07:05:09 crashlog: <4>   hbqd mode : 0
May  5 07:05:09 crashlog: <4>
May  5 07:05:09 crashlog: <4>Backup queue configuration:
May  5 07:05:09 crashlog: <4>========================================
May  5 07:05:09 crashlog: <4>Base virt address = ffffff8013a74000, physical address = 000000003da21000
May  5 07:05:09 crashlog: <4>Index fifo virt address = ffffff8013b7f000, physical address = 000000003db2c000
May  5 07:05:09 crashlog: <4>FPM management set:  DS = 34060, US = 102180, WLAN_Tx = (low_rsv:1024, high_rsv:512, wlan_rsv:20480, wlan_total:121668, global_total:99652) for 1 radios
May  5 07:05:09 crashlog: <4>Creating CPU ring for queue number 10 with 128 packets descriptor=0xffffff8000d471c0, size_of_entry 16
May  5 07:05:09 crashlog: <4>Done initializing Ring 10 Base=0xffffffc0274dd000 num of entries= 128 RDD Base=274dd000 descriptor=0xffffff8000d471c0
May  5 07:05:09 crashlog: <4>dhd_helper_cpu_exception_rxq_set_ex: cpu_port = 5, hw_queue = 10, set_exception_tc_to_rxq = 1
May  5 07:05:09 crashlog: <4>^[[0;33;40mRunner DHD Offload initialization complete^[[0m
May  5 07:05:09 crashlog: <4>
May  5 07:05:09 crashlog: <4>CUR_ETHERADDR : 6
May  5 07:05:09 crashlog: <4>a0 36 bc b0 d4 9c
May  5 07:05:09 crashlog: <4>Dongle Host Driver, version 17.10.188.6401 (r808804)
May  5 07:05:09 crashlog: <4>Compiled in drivers/net/wireless/bcmdhd
May  5 07:05:09 crashlog: <4>wfd_registerdevice Successfully registered dev eth7 ifidx 0 wfd_idx 1
May  5 07:05:09 crashlog: <4>Register interface [eth7]  MAC: a0:36:bc:b0:d4:9c
May  5 07:05:09 crashlog: <4>
May  5 07:05:09 crashlog: <6>usbcore: registered new interface driver usbfs
May  5 07:05:09 crashlog: <6>usbcore: registered new interface driver hub
May  5 07:05:09 crashlog: <6>usbcore: registered new device driver usb
May  5 07:05:09 crashlog: <4>bcm_bca_usb_ctrl_probe: usb3_enable 0 xhci_enable 0
May  5 07:05:09 crashlog: <6>bcm-bca-usb-ctrl 800cf200.usb_ctrl: ---- Powering up USB blocks
May  5 07:05:09 crashlog: <4>+++ usb_ctrl_cshcr2 ffffff8008e7525c= 40024=
May  5 07:05:09 crashlog: <6>bcm-bca-usb-xhci 800c0000.usb0_xhci: registered successfully
May  5 07:05:09 crashlog: <6>xhci-hcd xhci-hcd.0: xHCI Host Controller
May  5 07:05:09 crashlog: <6>xhci-hcd xhci-hcd.0: new USB bus registered, assigned bus number 1
May  5 07:05:09 crashlog: <6>xhci-hcd xhci-hcd.0: hcc params 0x0228ffed hci version 0x110 quirks 0x0000000000014810
May  5 07:05:09 crashlog: <6>xhci-hcd xhci-hcd.0: irq 56, io mem 0x800c0000
May  5 07:05:09 crashlog: <6>hub 1-0:1.0: USB hub found
May  5 07:05:09 crashlog: <6>hub 1-0:1.0: 2 ports detected
May  5 07:05:09 crashlog: <6>xhci-hcd xhci-hcd.0: xHCI Host Controller
May  5 07:05:09 crashlog: <6>xhci-hcd xhci-hcd.0: new USB bus registered, assigned bus number 2
May  5 07:05:09 crashlog: <6>xhci-hcd xhci-hcd.0: Host supports USB 3.1 Enhanced SuperSpeed
May  5 07:05:09 crashlog: <6>hub 2-0:1.0: USB hub found
May  5 07:05:09 crashlog: <6>hub 2-0:1.0: 1 port detected
May  5 07:05:09 crashlog: <6>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
May  5 07:05:09 crashlog: <6>ehci-platform: EHCI generic platform driver
May  5 07:05:09 crashlog: <6>ehci-pci: EHCI PCI platform driver
May  5 07:05:09 crashlog: <6>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
May  5 07:05:09 crashlog: <6>ohci-platform: OHCI generic platform driver
May  5 07:05:09 crashlog: <6>ohci-pci: OHCI PCI platform driver
May  5 07:05:09 crashlog: <6>usbcore: registered new interface driver cdc_acm
May  5 07:05:09 crashlog: <6>cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
May  5 07:05:09 crashlog: <6>usbcore: registered new interface driver asix
May  5 07:05:09 crashlog: <6>usbcore: registered new interface driver ax88179_178a
May  5 07:05:09 crashlog: <6>usbcore: registered new interface driver cdc_ether
May  5 07:05:09 crashlog: <6>usbcore: registered new interface driver rndis_host
May  5 07:05:09 crashlog: <6>usbcore: registered new interface driver cdc_ncm
May  5 07:05:09 crashlog: <6>usbcore: registered new interface driver cdc_wdm
May  5 07:05:09 crashlog: <6>usbcore: registered new interface driver qmi_wwan
May  5 07:05:09 crashlog: <6>usbcore: registered new interface driver ipheth
May  5 07:05:09 crashlog: <4>^[[0;33;41m[ERROR pktrunner] runnerUcast_inet6addr_event,148: Could not rdpa_system_ipv6_host_address_table_find ret=-5^[[0m
May  5 07:05:09 crashlog: <6>br0: port 1(eth1) entered blocking state
May  5 07:05:09 crashlog: <6>br0: port 1(eth1) entered disabled state
May  5 07:05:09 crashlog: <6>device eth1 entered promiscuous mode
May  5 07:05:09 crashlog: <6>br0: port 2(eth2) entered blocking state
May  5 07:05:09 crashlog: <6>br0: port 2(eth2) entered disabled state
May  5 07:05:09 crashlog: <6>device eth2 entered promiscuous mode
May  5 07:05:09 crashlog: <6>br0: port 3(eth3) entered blocking state
May  5 07:05:09 crashlog: <6>br0: port 3(eth3) entered disabled state
May  5 07:05:09 crashlog: <6>device eth3 entered promiscuous mode
May  5 07:05:09 crashlog: <6>br0: port 4(eth4) entered blocking state
May  5 07:05:09 crashlog: <6>br0: port 4(eth4) entered disabled state
May  5 07:05:09 crashlog: <6>device eth4 entered promiscuous mode
May  5 07:05:09 crashlog: <6>br0: port 5(eth5) entered blocking state
May  5 07:05:09 crashlog: <6>br0: port 5(eth5) entered disabled state
May  5 07:05:09 crashlog: <6>device eth5 entered promiscuous mode
May  5 07:05:09 crashlog: <4>CSIMON:  CSIMON[1.1.0] Initialization
May  5 07:05:09 crashlog: <6>CFG80211-ERROR) wl_allocate_wowl_config :
May  5 07:05:09 crashlog: <4>Wowl not supported (-23)
May  5 07:05:09 crashlog: <6>CFG80211-ERROR) wl_cfg80211_add_virtual_iface :
May  5 07:05:09 crashlog: <4>Recvd application provided mac address:a0:36:bc:b0:d4:9a
May  5 07:05:09 crashlog: <4>wfd_registerdevice Successfully registered dev wl0.2 ifidx 2 wfd_idx 0
May  5 07:05:09 crashlog: <6>CFG80211-ERROR) wl_cfg80211_iface_state_ops :
May  5 07:05:09 crashlog: <4>buf_key_b4_m4 failed; error -23
May  5 07:05:09 crashlog: <4>wl0: wlc_ulmu_sw_trig_enable: HE UL-OFDMA not enabled
May  5 07:05:09 crashlog: <4>CSIMON:  CSIMON[1.1.0] Initialization
May  5 07:05:09 crashlog: <4>CSIMON: M2M usr already registered ...
May  5 07:05:09 crashlog: <6>br0: port 6(eth6) entered blocking state
May  5 07:05:09 crashlog: <6>br0: port 6(eth6) entered disabled state
May  5 07:05:09 crashlog: <6>device eth6 entered promiscuous mode
May  5 07:05:09 crashlog: <6>CFG80211-ERROR) wl_allocate_wowl_config :
May  5 07:05:09 crashlog: <4>Wowl not supported (-23)
May  5 07:05:09 crashlog: <4>Interface eth1 doesn't exist
May  5 07:05:09 crashlog: <4>could not find igs interface!
May  5 07:05:09 crashlog: <4>IGMP Query send failed
May  5 07:05:09 crashlog: <6>br0: port 7(eth7) entered blocking state
May  5 07:05:09 crashlog: <6>br0: port 7(eth7) entered disabled state
May  5 07:05:09 crashlog: <6>device eth7 entered promiscuous mode
May  5 07:05:09 crashlog: <6>CFG80211-ERROR) wl_dfs_cac_notify_status :
May  5 07:05:09 crashlog: <4>In wl_dfs_cac_notify_status chanspec 0x1005 DFS state 0
May  5 07:05:09 crashlog: <6>CFG80211-ERROR) wl_dfs_cac_notify_status :
May  5 07:05:09 crashlog: <4>In wl_dfs_cac_notify_status chanspec 0x1005 DFS state 0
May  5 07:05:09 crashlog: <4>wl0: wlc_ulmu_sw_trig_enable: HE UL-OFDMA not enabled
May  5 07:05:09 crashlog: <4>CSIMON:  CSIMON[1.1.0] Initialization
May  5 07:05:09 crashlog: <4>CSIMON: M2M usr already registered ...
May  5 07:05:09 crashlog: <6>br0: port 8(wl0.2) entered blocking state
May  5 07:05:09 crashlog: <6>br0: port 8(wl0.2) entered disabled state
May  5 07:05:09 crashlog: <6>device wl0.2 entered promiscuous mode
May  5 07:05:09 crashlog: <6>br0: port 8(wl0.2) entered blocking state
May  5 07:05:09 crashlog: <6>br0: port 8(wl0.2) entered forwarding state
May  5 07:05:09 crashlog: <6>br0: port 7(eth7) entered blocking state
May  5 07:05:09 crashlog: <6>br0: port 7(eth7) entered forwarding state
May  5 07:05:09 crashlog: <6>br0: port 6(eth6) entered blocking state
May  5 07:05:09 crashlog: <6>br0: port 6(eth6) entered forwarding state
May  5 07:05:09 crashlog: <6>potentially unexpected fatal signal 11.
May  5 07:05:09 crashlog: <4>CPU: 1 PID: 1 Comm: init Tainted: P                  4.19.183 #1
May  5 07:05:09 crashlog: <4>Hardware name: RTAX86U_PRO (DT)
May  5 07:05:09 crashlog: <4>pstate: 800f0010 (Nzcv q A32 LE aif)
May  5 07:05:09 crashlog: <4>pc : 00000000f73c5a48
May  5 07:05:09 crashlog: <4>lr : 00000000f7dff4d0
May  5 07:05:09 crashlog: <4>sp : 00000000ffc0ed28
May  5 07:05:09 crashlog: <4>x12: 0000000000000010
May  5 07:05:09 crashlog: <4>x11: 00000000ffc0f214 x10: 0000000000000000
May  5 07:05:09 crashlog: <4>x9 : 00000000ffc0f25c x8 : 0000000000000000
May  5 07:05:09 crashlog: <4>x7 : 0000000000000000 x6 : 00000000001ce5ea
May  5 07:05:09 crashlog: <4>x5 : 0000000000000000 x4 : 0000000000000000
May  5 07:05:09 crashlog: <4>x3 : 0000000000000000 x2 : 00000000ffc0f228
May  5 07:05:09 crashlog: <4>x1 : 00000000001ce5ea x0 : 0000000000000000
May  5 07:05:09 crashlog: <0>Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
May  5 07:05:09 crashlog: <0>
May  5 07:05:09 crashlog: <4>CPU: 0 PID: 1 Comm: init Tainted: P                  4.19.183 #1
May  5 07:05:09 crashlog: <4>Hardware name: RTAX86U_PRO (DT)
May  5 07:05:09 crashlog: <4>Call trace:
May  5 07:05:09 crashlog: <4> dump_backtrace+0x0/0x150
May  5 07:05:09 crashlog: <4> show_stack+0x14/0x20
May  5 07:05:09 crashlog: <4> dump_stack+0x94/0xc4
May  5 07:05:09 crashlog: <4> panic+0x130/0x27c
May  5 07:05:09 crashlog: <4> do_exit+0x8f4/0x900
May  5 07:05:09 crashlog: <4> do_group_exit+0x34/0xa0
May  5 07:05:09 crashlog: <4> get_signal+0x9c/0x5d0
May  5 07:05:09 crashlog: <4> do_signal+0x1cc/0x280
May  5 07:05:09 crashlog: <4> do_notify_resume+0xc8/0x330
May  5 07:05:09 crashlog: <4> work_pending+0x8/0x10
May  5 07:05:09 crashlog: <2>SMP: stopping secondary CPUs
May  5 07:05:09 crashlog: <0>Kernel Offset: disabled
May  5 07:05:09 crashlog: <0>CPU features: 0x0,24802004
May  5 07:05:09 crashlog: <0>Memory Limit: none