Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- (0x1d)
- pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
- ACPI _OSC control for PCIe not granted, disabling ASPM
- ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11)
- ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *10
- ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 11) *5
- ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 11) *0, disabled.
- ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
- ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
- ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
- ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
- vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
- vgaarb: loaded
- vgaarb: bridge control possible 0000:00:02.0
- SCSI subsystem initialized
- libata version 3.00 loaded.
- usbcore: registered new interface driver usbfs
- usbcore: registered new interface driver hub
- usbcore: registered new device driver usb
- PCI: Using ACPI for IRQ routing
- PCI: pci_cache_line_size set to 64 bytes
- reserve RAM buffer: 000000000009f000 - 000000000009ffff
- reserve RAM buffer: 000000007f66d800 - 000000007fffffff
- HPET: 3 timers in total, 0 timers will be used for per-cpu timer
- Switching to clocksource hpet
- pnp: PnP ACPI init
- ACPI: bus type pnp registered
- pnp 00:00: [bus 00-ff]
- pnp 00:00: [io 0x0000-0x0cf7 window]
- pnp 00:00: [io 0x0cf8-0x0cff]
- pnp 00:00: [io 0x0d00-0xffff window]
- pnp 00:00: [mem 0x000a0000-0x000bffff window]
- pnp 00:00: [mem 0x000d0000-0x000dffff window]
- pnp 00:00: [mem 0x80000000-0xf7ffffff window]
- pnp 00:00: [mem 0xfc000000-0xfebfffff window]
- pnp 00:00: [mem 0xfec10000-0xfecfffff window]
- pnp 00:00: [mem 0xfed1c000-0xfed1ffff window]
- pnp 00:00: [mem 0xfed90000-0xfed9ffff window]
- pnp 00:00: [mem 0xfeda7000-0xfedfffff window]
- pnp 00:00: [mem 0xfee10000-0xff9fffff window]
- pnp 00:00: [mem 0xffc00000-0xffdfffff window]
- pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
- pnp 00:01: [io 0x004e-0x004f]
- pnp 00:01: [io 0x0068-0x006f]
- pnp 00:01: [mem 0xff800000-0xff8fffff]
- pnp 00:01: [mem 0xffc00000-0xffcfffff]
- system 00:01: [mem 0xff800000-0xff8fffff] has been reserved
- system 00:01: [mem 0xffc00000-0xffcfffff] has been reserved
- system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
- pnp 00:02: [irq 12]
- pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active)
- pnp 00:03: [io 0x0060]
- pnp 00:03: [io 0x0064]
- pnp 00:03: [io 0x0062]
- pnp 00:03: [io 0x0066]
- pnp 00:03: [irq 1]
- pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
- pnp 00:04: [io 0x0070-0x0071]
- pnp 00:04: [irq 8]
- pnp 00:04: [io 0x0072-0x0077]
- pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
- pnp 00:05: [io 0x0061]
- pnp 00:05: [io 0x0063]
- pnp 00:05: [io 0x0065]
- pnp 00:05: [io 0x0067]
- pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
- pnp 00:06: [io 0x0c80-0x0cff]
- system 00:06: [io 0x0c80-0x0cff] could not be reserved
- system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
- pnp 00:07: [dma 4]
- pnp 00:07: [io 0x0000-0x000f]
- pnp 00:07: [io 0x0080-0x0085]
- pnp 00:07: [io 0x0087-0x008f]
- pnp 00:07: [io 0x00c0-0x00df]
- pnp 00:07: [io 0x0010-0x001f]
- pnp 00:07: [io 0x0090-0x0091]
- pnp 00:07: [io 0x0093-0x009f]
- pnp 00:07: Plug and Play ACPI device, IDs PNP0200 (active)
- pnp 00:08: [io 0x00f0-0x00ff]
- pnp 00:08: [irq 13]
- pnp 00:08: Plug and Play ACPI device, IDs PNP0c04 (active)
- pnp 00:09: [mem 0xfed00000-0xfed003ff]
- system 00:09: [mem 0xfed00000-0xfed003ff] has been reserved
- system 00:09: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
- pnp 00:0a: [io 0x0900-0x097f]
- pnp 00:0a: [io 0x0092]
- pnp 00:0a: [io 0x00b2-0x00b3]
- pnp 00:0a: [io 0x0020-0x0021]
- pnp 00:0a: [io 0x00a0-0x00a1]
- pnp 00:0a: [irq 0 disabled]
- pnp 00:0a: [io 0x04d0-0x04d1]
- pnp 00:0a: [io 0x1000-0x1005]
- pnp 00:0a: [io 0x1008-0x100f]
- pnp 00:0a: disabling [io 0x1000-0x1005] because it overlaps 0000:00:1f.0 BAR 7 [io 0x1000-0x107f]
- pnp 00:0a: disabling [io 0x1008-0x100f] because it overlaps 0000:00:1f.0 BAR 7 [io 0x1000-0x107f]
- system 00:0a: [io 0x0900-0x097f] has been reserved
- system 00:0a: [io 0x04d0-0x04d1] has been reserved
- system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
- pnp 00:0b: [io 0xf400-0xf4fe]
- pnp 00:0b: [io 0x0086]
- pnp 00:0b: [io 0x1006-0x1007]
- pnp 00:0b: [io 0x100a-0x1059]
- pnp 00:0b: [io 0x1060-0x107f]
- pnp 00:0b: [io 0x1080-0x10bf]
- pnp 00:0b: [io 0x10c0-0x10df]
- pnp 00:0b: [io 0x1010-0x102f]
- pnp 00:0b: [io 0x0809]
- pnp 00:0b: disabling [io 0x1006-0x1007] because it overlaps 0000:00:1f.0 BAR 7 [io 0x1000-0x107f]
- pnp 00:0b: disabling [io 0x100a-0x1059] because it overlaps 0000:00:1f.0 BAR 7 [io 0x1000-0x107f]
- pnp 00:0b: disabling [io 0x1060-0x107f] because it overlaps 0000:00:1f.0 BAR 7 [io 0x1000-0x107f]
- pnp 00:0b: disabling [io 0x1010-0x102f] because it overlaps 0000:00:1f.0 BAR 7 [io 0x1000-0x107f]
- system 00:0b: [io 0xf400-0xf4fe] has been reserved
- system 00:0b: [io 0x1080-0x10bf] has been reserved
- system 00:0b: [io 0x10c0-0x10df] has been reserved
- system 00:0b: [io 0x0809] has been reserved
- system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
- pnp 00:0c: [mem 0x00000000-0x0009efff]
- pnp 00:0c: [mem 0x0009f000-0x0009ffff]
- pnp 00:0c: [mem 0x000c0000-0x000cffff]
- pnp 00:0c: [mem 0x000e0000-0x000fffff]
- pnp 00:0c: [mem 0x00100000-0x7f66d7ff]
- pnp 00:0c: [mem 0x7f66d800-0x7f6fffff]
- pnp 00:0c: [mem 0x7f700000-0x7f7fffff]
- pnp 00:0c: [mem 0x7f700000-0x7fefffff]
- pnp 00:0c: [mem 0xffe00000-0xffffffff]
- pnp 00:0c: [mem 0xffa00000-0xffbfffff]
- pnp 00:0c: [mem 0xfec00000-0xfec0ffff]
- pnp 00:0c: [mem 0xfee00000-0xfee0ffff]
- pnp 00:0c: [mem 0xfed20000-0xfed8ffff]
- pnp 00:0c: [mem 0xfeda0000-0xfeda3fff]
- pnp 00:0c: [mem 0xfeda4000-0xfeda4fff]
- pnp 00:0c: [mem 0xfeda5000-0xfeda5fff]
- pnp 00:0c: [mem 0xfeda6000-0xfeda6fff]
- pnp 00:0c: [mem 0xfed18000-0xfed1bfff]
- pnp 00:0c: [mem 0xf8000000-0xfbffffff]
- system 00:0c: [mem 0x00000000-0x0009efff] could not be reserved
- system 00:0c: [mem 0x0009f000-0x0009ffff] could not be reserved
- system 00:0c: [mem 0x000c0000-0x000cffff] could not be reserved
- system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved
- system 00:0c: [mem 0x00100000-0x7f66d7ff] could not be reserved
- system 00:0c: [mem 0x7f66d800-0x7f6fffff] has been reserved
- system 00:0c: [mem 0x7f700000-0x7f7fffff] has been reserved
- system 00:0c: [mem 0x7f700000-0x7fefffff] could not be reserved
- system 00:0c: [mem 0xffe00000-0xffffffff] has been reserved
- system 00:0c: [mem 0xffa00000-0xffbfffff] has been reserved
- system 00:0c: [mem 0xfec00000-0xfec0ffff] could not be reserved
- system 00:0c: [mem 0xfee00000-0xfee0ffff] has been reserved
- system 00:0c: [mem 0xfed20000-0xfed8ffff] has been reserved
- system 00:0c: [mem 0xfeda0000-0xfeda3fff] has been reserved
- system 00:0c: [mem 0xfeda4000-0xfeda4fff] has been reserved
- system 00:0c: [mem 0xfeda5000-0xfeda5fff] has been reserved
- system 00:0c: [mem 0xfeda6000-0xfeda6fff] has been reserved
- system 00:0c: [mem 0xfed18000-0xfed1bfff] has been reserved
- system 00:0c: [mem 0xf8000000-0xfbffffff] has been reserved
- system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
- pnp: PnP ACPI: found 13 devices
- ACPI: ACPI bus type pnp unregistered
- PCI: max bus depth: 1 pci_try_num: 2
- pci 0000:00:1c.1: BAR 9: assigned [mem 0x80000000-0x801fffff 64bit pref]
- pci 0000:00:1c.1: BAR 7: assigned [io 0x2000-0x2fff]
- pci 0000:00:1c.0: BAR 9: assigned [mem 0x80200000-0x803fffff 64bit pref]
- pci 0000:00:1c.0: PCI bridge to [bus 09-09]
- pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff]
- pci 0000:00:1c.0: bridge window [mem 0xfe800000-0xfe8fffff]
- pci 0000:00:1c.0: bridge window [mem 0x80200000-0x803fffff 64bit pref]
- pci 0000:00:1c.1: PCI bridge to [bus 0b-0b]
- pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
- pci 0000:00:1c.1: bridge window [mem 0xfe700000-0xfe7fffff]
- pci 0000:00:1c.1: bridge window [mem 0x80000000-0x801fffff 64bit pref]
- pci 0000:00:1c.4: PCI bridge to [bus 0c-0d]
- pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
- pci 0000:00:1c.4: bridge window [mem 0xfe400000-0xfe6fffff]
- pci 0000:00:1c.4: bridge window [mem 0xf0000000-0xf01fffff 64bit pref]
- pci 0000:00:1e.0: PCI bridge to [bus 02-02]
- pci 0000:00:1e.0: bridge window [mem 0xfe300000-0xfe3fffff]
- pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- pci 0000:00:1c.0: setting latency timer to 64
- pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
- pci 0000:00:1c.1: setting latency timer to 64
- pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- pci 0000:00:1c.4: setting latency timer to 64
- pci 0000:00:1e.0: setting latency timer to 64
- pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
- pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
- pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
- pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
- pci_bus 0000:00: resource 8 [mem 0x80000000-0xf7ffffff]
- pci_bus 0000:00: resource 9 [mem 0xfc000000-0xfebfffff]
- pci_bus 0000:00: resource 10 [mem 0xfec10000-0xfecfffff]
- pci_bus 0000:00: resource 11 [mem 0xfed1c000-0xfed1ffff]
- pci_bus 0000:00: resource 12 [mem 0xfed90000-0xfed9ffff]
- pci_bus 0000:00: resource 13 [mem 0xfeda7000-0xfedfffff]
- pci_bus 0000:00: resource 14 [mem 0xfee10000-0xff9fffff]
- pci_bus 0000:00: resource 15 [mem 0xffc00000-0xffdfffff]
- pci_bus 0000:09: resource 0 [io 0xd000-0xdfff]
- pci_bus 0000:09: resource 1 [mem 0xfe800000-0xfe8fffff]
- pci_bus 0000:09: resource 2 [mem 0x80200000-0x803fffff 64bit pref]
- pci_bus 0000:0b: resource 0 [io 0x2000-0x2fff]
- pci_bus 0000:0b: resource 1 [mem 0xfe700000-0xfe7fffff]
- pci_bus 0000:0b: resource 2 [mem 0x80000000-0x801fffff 64bit pref]
- pci_bus 0000:0c: resource 0 [io 0xc000-0xcfff]
- pci_bus 0000:0c: resource 1 [mem 0xfe400000-0xfe6fffff]
- pci_bus 0000:0c: resource 2 [mem 0xf0000000-0xf01fffff 64bit pref]
- pci_bus 0000:02: resource 1 [mem 0xfe300000-0xfe3fffff]
- pci_bus 0000:02: resource 4 [io 0x0000-0x0cf7]
- pci_bus 0000:02: resource 5 [io 0x0d00-0xffff]
- pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff]
- pci_bus 0000:02: resource 7 [mem 0x000d0000-0x000dffff]
- pci_bus 0000:02: resource 8 [mem 0x80000000-0xf7ffffff]
- pci_bus 0000:02: resource 9 [mem 0xfc000000-0xfebfffff]
- pci_bus 0000:02: resource 10 [mem 0xfec10000-0xfecfffff]
- pci_bus 0000:02: resource 11 [mem 0xfed1c000-0xfed1ffff]
- pci_bus 0000:02: resource 12 [mem 0xfed90000-0xfed9ffff]
- pci_bus 0000:02: resource 13 [mem 0xfeda7000-0xfedfffff]
- pci_bus 0000:02: resource 14 [mem 0xfee10000-0xff9fffff]
- pci_bus 0000:02: resource 15 [mem 0xffc00000-0xffdfffff]
- NET: Registered protocol family 2
- IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
- TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
- TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
- TCP: Hash tables configured (established 131072 bind 65536)
- TCP reno registered
- UDP hash table entries: 512 (order: 2, 16384 bytes)
- UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
- NET: Registered protocol family 1
- pci 0000:00:02.0: Boot video device
- PCI: CLS 64 bytes, default 64
- Trying to unpack rootfs image as initramfs...
- Freeing initrd memory: 30984k freed
- Simple Boot Flag at 0x79 set to 0x1
- highmem bounce pool size: 64 pages
- VFS: Disk quotas dquot_6.5.2
- Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- aufs 3.2
- msgmni has been set to 1731
- Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
- io scheduler noop registered
- io scheduler deadline registered
- io scheduler cfq registered (default)
- pcieport 0000:00:1c.0: setting latency timer to 64
- pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
- pcieport 0000:00:1c.1: setting latency timer to 64
- pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
- pcieport 0000:00:1c.4: setting latency timer to 64
- pcieport 0000:00:1c.4: irq 42 for MSI/MSI-X
- Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
- lp: driver loaded but no devices found
- Real Time Clock Driver v1.12b
- Linux agpgart interface v0.103
- isapnp: Scanning for PnP cards...
- isapnp: No Plug & Play device found
- brd: module loaded
- loop: module loaded
- ahci 0000:00:1f.2: version 3.0
- ahci 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
- ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
- ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x5 impl SATA mode
- ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc ems
- ahci 0000:00:1f.2: setting latency timer to 64
- scsi0 : ahci
- scsi1 : ahci
- scsi2 : ahci
- ata1: SATA max UDMA/133 abar m2048@0xfe9fb800 port 0xfe9fb900 irq 43
- ata2: DUMMY
- ata3: SATA max UDMA/133 abar m2048@0xfe9fb800 port 0xfe9fba00 irq 43
- PPP generic driver version 2.4.2
- ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
- ehci_hcd 0000:00:1a.7: setting latency timer to 64
- ehci_hcd 0000:00:1a.7: EHCI Host Controller
- ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
- ehci_hcd 0000:00:1a.7: debug port 1
- ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
- ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfed1c400
- ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
- usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- usb usb1: Product: EHCI Host Controller
- usb usb1: Manufacturer: Linux 3.2.8-calculate ehci_hcd
- usb usb1: SerialNumber: 0000:00:1a.7
- hub 1-0:1.0: USB hub found
- hub 1-0:1.0: 4 ports detected
- ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
- ehci_hcd 0000:00:1d.7: setting latency timer to 64
- ehci_hcd 0000:00:1d.7: EHCI Host Controller
- ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
- ehci_hcd 0000:00:1d.7: debug port 1
- ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
- ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfed1c000
- ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
- usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
- usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- usb usb2: Product: EHCI Host Controller
- usb usb2: Manufacturer: Linux 3.2.8-calculate ehci_hcd
- usb usb2: SerialNumber: 0000:00:1d.7
- hub 2-0:1.0: USB hub found
- hub 2-0:1.0: 6 ports detected
- Initializing USB Mass Storage driver...
- usbcore: registered new interface driver usb-storage
- USB Mass Storage support registered.
- i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
- i8042: Detected active multiplexing controller, rev 1.1
- serio: i8042 KBD port at 0x60,0x64 irq 1
- serio: i8042 AUX0 port at 0x60,0x64 irq 12
- serio: i8042 AUX1 port at 0x60,0x64 irq 12
- serio: i8042 AUX2 port at 0x60,0x64 irq 12
- serio: i8042 AUX3 port at 0x60,0x64 irq 12
- mousedev: PS/2 mouse device common for all mice
- EISA: Probing bus 0 at eisa.0
- EISA: Cannot allocate resource for mainboard
- cpuidle: using governor ladder
- cpuidle: using governor menu
- usbcore: registered new interface driver usbhid
- usbhid: USB HID core driver
- TCP cubic registered
- Registering the dns_resolver key type
- Using IPI No-Shortcut mode
- PM: Hibernation image not present or could not be loaded.
- registered taskstats version 1
- input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
- ata3: SATA link down (SStatus 0 SControl 300)
- ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
- ata1.00: ATA-8: Hitachi HTS542512K9SA00, BB2OC39P, max UDMA/133
- ata1.00: 234441648 sectors, multi 8: LBA48 NCQ (depth 31/32), AA
- ata1.00: configured for UDMA/133
- scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54251 BB2O PQ: 0 ANSI: 5
- sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
- sd 0:0:0:0: [sda] Write Protect is off
- sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
- sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- usb 2-3: new high-speed USB device number 2 using ehci_hcd
- sda: sda1 sda2 sda3
- sd 0:0:0:0: [sda] Attached SCSI disk
- Freeing unused kernel memory: 456k freed
- Write protecting the kernel text: 3192k
- Write protecting the kernel read-only data: 964k
- input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
- ACPI: Lid Switch [LID]
- input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
- ACPI: Power Button [PBTN]
- input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
- ACPI: Sleep Button [SBTN]
- agpgart-intel 0000:00:00.0: Intel 965GM Chipset
- agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
- agpgart-intel 0000:00:00.0: detected 8192K stolen memory
- agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
- [drm] Initialized drm 1.1.0 20060810
- i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- i915 0000:00:02.0: setting latency timer to 64
- usb 2-3: New USB device found, idVendor=05ac, idProduct=1006
- usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- usb 2-3: Product: Keyboard Hub
- usb 2-3: Manufacturer: Apple, Inc.
- usb 2-3: SerialNumber: 000000000000
- hub 2-3:1.0: USB hub found
- hub 2-3:1.0: 3 ports detected
- i915 0000:00:02.0: irq 44 for MSI/MSI-X
- [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
- [drm] Driver supports precise vblank timestamp query.
- vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
- fixme: max PWM is zero.
- Refined TSC clocksource calibration: 1861.999 MHz.
- Switching to clocksource tsc
- usb 2-3.2: new low-speed USB device number 4 using ehci_hcd
- usb 2-3.2: New USB device found, idVendor=05ac, idProduct=0221
- usb 2-3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- usb 2-3.2: Product: Apple Keyboard
- usb 2-3.2: Manufacturer: Apple, Inc
- input: Apple, Inc Apple Keyboard as /devices/pci0000:00/0000:00:1d.7/usb2/2-3/2-3.2/2-3.2:1.0/input/input4
- apple 0003:05AC:0221.0001: input,hidraw0: USB HID v1.11 Keyboard [Apple, Inc Apple Keyboard] on usb-0000:00:1d.7-3.2/input0
- input: Apple, Inc Apple Keyboard as /devices/pci0000:00/0000:00:1d.7/usb2/2-3/2-3.2/2-3.2:1.1/input/input5
- apple 0003:05AC:0221.0002: input,hidraw1: USB HID v1.11 Device [Apple, Inc Apple Keyboard] on usb-0000:00:1d.7-3.2/input1
- [drm] initialized overlay support
- fbcon: inteldrmfb (fb0) is primary device
- usb 2-3.3: new low-speed USB device number 5 using ehci_hcd
- usb 2-3.3: New USB device found, idVendor=09da, idProduct=000a
- usb 2-3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- usb 2-3.3: Product: USB Mouse
- usb 2-3.3: Manufacturer: A4Tech
- input: A4Tech USB Mouse as /devices/pci0000:00/0000:00:1d.7/usb2/2-3/2-3.3/2-3.3:1.0/input/input6
- a4tech 0003:09DA:000A.0003: input,hidraw2: USB HID v1.10 Mouse [A4Tech USB Mouse] on usb-0000:00:1d.7-3.3/input0
- Console: switching to colour frame buffer device 160x50
- fb0: inteldrmfb frame buffer device
- drm: registered panic notifier
- acpi device:30: registered as cooling_device0
- input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/LNXVIDEO:00/input/input7
- ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
- [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
- [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
- fbcondecor: console 0 using theme 'tty1'
- fbcondecor: switched decor state to 'on' on console 0
- uhci_hcd: USB Universal Host Controller Interface driver
- uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
- uhci_hcd 0000:00:1a.0: setting latency timer to 64
- uhci_hcd 0000:00:1a.0: UHCI Host Controller
- uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
- uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f20
- usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
- usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- usb usb3: Product: UHCI Host Controller
- usb usb3: Manufacturer: Linux 3.2.8-calculate uhci_hcd
- usb usb3: SerialNumber: 0000:00:1a.0
- hub 3-0:1.0: USB hub found
- hub 3-0:1.0: 2 ports detected
- uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
- uhci_hcd 0000:00:1a.1: setting latency timer to 64
- uhci_hcd 0000:00:1a.1: UHCI Host Controller
- uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
- uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f00
- usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
- usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- usb usb4: Product: UHCI Host Controller
- usb usb4: Manufacturer: Linux 3.2.8-calculate uhci_hcd
- usb usb4: SerialNumber: 0000:00:1a.1
- hub 4-0:1.0: USB hub found
- hub 4-0:1.0: 2 ports detected
- uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
- uhci_hcd 0000:00:1d.0: setting latency timer to 64
- uhci_hcd 0000:00:1d.0: UHCI Host Controller
- uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
- uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f80
- usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
- usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- usb usb5: Product: UHCI Host Controller
- usb usb5: Manufacturer: Linux 3.2.8-calculate uhci_hcd
- usb usb5: SerialNumber: 0000:00:1d.0
- hub 5-0:1.0: USB hub found
- hub 5-0:1.0: 2 ports detected
- uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
- uhci_hcd 0000:00:1d.1: setting latency timer to 64
- uhci_hcd 0000:00:1d.1: UHCI Host Controller
- uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
- uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f60
- usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
- usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- usb usb6: Product: UHCI Host Controller
- usb usb6: Manufacturer: Linux 3.2.8-calculate uhci_hcd
- usb usb6: SerialNumber: 0000:00:1d.1
- hub 6-0:1.0: USB hub found
- hub 6-0:1.0: 2 ports detected
- Monitor-Mwait will be used to enter C-1 state
- thermal LNXTHERM:00: registered as thermal_zone0
- ACPI: Thermal Zone [THM] (62 C)
- Monitor-Mwait will be used to enter C-2 state
- Monitor-Mwait will be used to enter C-3 state
- Marking TSC unstable due to TSC halts in idle
- ACPI: acpi_idle registered with cpuidle
- Switching to clocksource hpet
- uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
- uhci_hcd 0000:00:1d.2: setting latency timer to 64
- uhci_hcd 0000:00:1d.2: UHCI Host Controller
- uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
- uhci_hcd 0000:00:1d.2: irq 22, io base 0x00006f40
- usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
- usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- usb usb7: Product: UHCI Host Controller
- usb usb7: Manufacturer: Linux 3.2.8-calculate uhci_hcd
- usb usb7: SerialNumber: 0000:00:1d.2
- hub 7-0:1.0: USB hub found
- hub 7-0:1.0: 2 ports detected
- ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
- ACPI: Battery Slot [BAT0] (battery present)
- ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
- ACPI: AC Adapter [AC] (on-line)
- wmi: Mapper loaded
- b43-pci-bridge 0000:0b:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
- b43-pci-bridge 0000:0b:00.0: setting latency timer to 64
- sdhci: Secure Digital Host Controller Interface driver
- sdhci: Copyright(c) Pierre Ossman
- sdhci-pci 0000:02:09.1: SDHCI controller found [1180:0822] (rev 22)
- sdhci-pci 0000:02:09.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
- ata_piix 0000:00:1f.1: version 2.13
- ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- ata_piix 0000:00:1f.1: setting latency timer to 64
- ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x16, vendor 0x4243)
- ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x0F, vendor 0x4243)
- ssb: Core 2 found: PCMCIA (cc 0x80D, rev 0x0A, vendor 0x4243)
- ssb: Core 3 found: PCI-E (cc 0x820, rev 0x09, vendor 0x4243)
- Registered led device: mmc0::
- sd 0:0:0:0: Attached scsi generic sg0 type 0
- mmc0: SDHCI controller on PCI [0000:02:09.1] using DMA
- firewire_ohci 0000:02:09.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- scsi3 : ata_piix
- scsi4 : ata_piix
- ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x6fa0 irq 14
- ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x6fa8 irq 15
- ata5: port disabled--ignoring
- firewire_ohci: Added fw-ohci device 0000:02:09.0, OHCI v1.10, 4 IR + 4 IT contexts, quirks 0x11
- r592 0000:02:09.2: PCI INT B -> GSI 18 (level, low) -> IRQ 18
- r592: driver successfully loaded
- mmc0: error -110 whilst initialising SD card
- ssb: Sonics Silicon Backplane found on PCI device 0000:0b:00.0
- ata4.00: ATAPI: TSSTcorp DVD+/-RW TS-L632H, D500, max UDMA/33
- ata4.00: configured for UDMA/33
- usb 7-2: new full-speed USB device number 2 using uhci_hcd
- scsi 3:0:0:0: CD-ROM TSSTcorp DVD+-RW TS-L632H D500 PQ: 0 ANSI: 5
- sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
- cdrom: Uniform CD-ROM driver Revision: 3.20
- sr 3:0:0:0: Attached scsi CD-ROM sr0
- sr 3:0:0:0: Attached scsi generic sg1 type 5
- input: Dell WMI hotkeys as /devices/virtual/input/input8
- usb 7-2: New USB device found, idVendor=0a5c, idProduct=4500
- usb 7-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- usb 7-2: Product: BCM2045B2
- usb 7-2: Manufacturer: Broadcom
- hub 7-2:1.0: USB hub found
- hub 7-2:1.0: 3 ports detected
- PM: Starting manual resume from disk
- PM: Hibernation image partition 8:1 present
- PM: Looking for hibernation image.
- PM: Image not found (code -22)
- PM: Hibernation image not present or could not be loaded.
- mmc0: new high speed SDHC card at address 1234
- mmcblk0: mmc0:1234 SA04G 3.68 GiB
- mmcblk0: p1
- firewire_core: created device fw0: GUID 464fc0001b65e070, S400
- usb 7-2.1: new full-speed USB device number 3 using uhci_hcd
- EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
- usb 7-2.1: New USB device found, idVendor=413c, idProduct=8126
- usb 7-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- usb 7-2.1: Product: BCM2045
- usb 7-2.1: Manufacturer: Broadcom Corp
- Bluetooth: Core ver 2.16
- NET: Registered protocol family 31
- Bluetooth: HCI device and connection manager initialized
- Bluetooth: HCI socket layer initialized
- Bluetooth: L2CAP socket layer initialized
- Bluetooth: Generic Bluetooth USB driver ver 0.6
- usbcore: registered new interface driver btusb
- usb 7-2.2: new full-speed USB device number 4 using uhci_hcd
- usb 7-2.2: New USB device found, idVendor=0a5c, idProduct=4502
- usb 7-2.2: New USB device strings: Mfr=1, Product=0, SerialNumber=0
- usb 7-2.2: Manufacturer: Broadcom Corp
- input: Broadcom Corp as /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2.2/7-2.2:1.0/input/input9
- generic-usb 0003:0A5C:4502.0004: input,hidraw3: USB HID v1.11 Keyboard [Broadcom Corp] on usb-0000:00:1d.2-2.2/input0
- input: PS/2 Mouse as /devices/platform/i8042/serio2/input/input10
- input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio2/input/input11
- usb 7-2.3: new full-speed USB device number 5 using uhci_hcd
- usb 7-2.3: New USB device found, idVendor=0a5c, idProduct=4503
- usb 7-2.3: New USB device strings: Mfr=1, Product=0, SerialNumber=0
- usb 7-2.3: Manufacturer: Broadcom Corp
- input: Broadcom Corp as /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2.3/7-2.3:1.0/input/input12
- generic-usb 0003:0A5C:4503.0005: input,hidraw4: USB HID v1.11 Mouse [Broadcom Corp] on usb-0000:00:1d.2-2.3/input0
- udevd[2071]: starting version 171
- iTCO_vendor_support: vendor-support=0
- i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
- sky2: driver version 1.30
- sky2 0000:09:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- sky2 0000:09:00.0: setting latency timer to 64
- sky2 0000:09:00.0: Yukon-2 FE+ chip revision 0
- sky2 0000:09:00.0: irq 45 for MSI/MSI-X
- sky2 0000:09:00.0: eth0: addr 00:1d:09:51:29:eb
- iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
- iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060)
- iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
- cfg80211: Calling CRDA to update world regulatory domain
- snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
- snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
- snd_hda_intel 0000:00:1b.0: setting latency timer to 64
- b43-phy0: Broadcom 4312 WLAN found (core revision 15)
- ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
- Registered led device: b43-phy0::tx
- Registered led device: b43-phy0::rx
- Registered led device: b43-phy0::radio
- Broadcom 43xx driver loaded [ Features: PMNLS ]
- input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input13
- input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
- input: HDA Intel Line-out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
- input: HDA Intel Line-out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
- input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
- ondemand governor failed, too long transition latency of HW, fallback to performance governor
- p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available
- EXT4-fs (sda2): re-mounted. Opts: (null)
- EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: user_xattr
- device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
- Adding 2114536k swap on /dev/sda1. Priority:-1 extents:1 across:2114536k
- b43-phy0: Loading firmware version 478.104 (2008-07-01 00:50:23)
- fbcondecor: console 1 using theme 'tty2'
- fbcondecor: switched decor state to 'on' on console 1
- fbcondecor: console 2 using theme 'tty3'
- fbcondecor: switched decor state to 'on' on console 2
- fbcondecor: console 3 using theme 'tty4'
- fbcondecor: switched decor state to 'on' on console 3
- fbcondecor: console 4 using theme 'tty5'
- fbcondecor: switched decor state to 'on' on console 4
- fbcondecor: console 5 using theme 'tty6'
- fbcondecor: switched decor state to 'on' on console 5
- Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- Bluetooth: BNEP filters: protocol multicast
- Bluetooth: RFCOMM TTY layer initialized
- Bluetooth: RFCOMM socket layer initialized
- Bluetooth: RFCOMM ver 1.11
- NET: Registered protocol family 10
- ADDRCONF(NETDEV_UP): wlan0: link is not ready
- sky2 0000:09:00.0: eth0: enabling interface
- ADDRCONF(NETDEV_UP): eth0: link is not ready
- fuse init (API version 7.17)
- b43-phy0: Loading firmware version 478.104 (2008-07-01 00:50:23)
- ADDRCONF(NETDEV_UP): wlan0: link is not ready
- sky2 0000:09:00.0: eth0: disabling interface
- sky2 0000:09:00.0: eth0: enabling interface
- ADDRCONF(NETDEV_UP): eth0: link is not ready
- b43-phy0: Loading firmware version 478.104 (2008-07-01 00:50:23)
- ADDRCONF(NETDEV_UP): wlan0: link is not ready
- wlan0: authenticate with 1c:7e:e5:cf:ff:b4 (try 1)
- wlan0: deauthenticating from 1c:7e:e5:cf:ff:b4 by local choice (reason=3)
- wlan0: authenticate with 1c:7e:e5:cf:ff:b4 (try 1)
- wlan0: authenticated
- wlan0: associate with 1c:7e:e5:cf:ff:b4 (try 1)
- wlan0: deauthenticating from 1c:7e:e5:cf:ff:b4 by local choice (reason=3)
- wlan0: authenticate with 1c:7e:e5:cf:ff:b4 (try 1)
- wlan0: authenticated
- wlan0: associate with 1c:7e:e5:cf:ff:b4 (try 1)
- wlan0: RX AssocResp from 1c:7e:e5:cf:ff:b4 (capab=0x401 status=0 aid=1)
- wlan0: associated
- ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
- NET: Registered protocol family 17
- wlan0: no IPv6 routers present
- process `skype' is using obsolete setsockopt SO_BSDCOMPAT
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement