API tools faq
paste
Guest User

Untitled

a guest
Jul 12th, 2025
20
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 71.43 KB | None | 0 0
raw download clone embed print report
  1.  
  2.  
  3. U-Boot 2017.07-RELEASE-ge92634b53906 (Feb 07 2018 - 09:22:01 -0800)
  4.  
  5. DRAM: 235 MiB
  6. cdp: machid 4971
  7. Product: meraki_Citizensnips
  8. NAND: 128 MiB
  9. MMC:
  10. Using default environment
  11.  
  12. In: serial
  13. Out: serial
  14. Err: serial
  15. late_init: machid 4971
  16. ubi0: attaching mtd1
  17. bitflip found and corrected. (count: 1)
  18. bitflip found and corrected. (count: 1)
  19. bitflip found and corrected. (count: 1)
  20. bitflip found and corrected. (count: 1)
  21. bitflip found and corrected. (count: 1)
  22. bitflip found and corrected. (count: 1)
  23. bitflip found and corrected. (count: 1)
  24. ubi0: scanning is finished
  25. ubi0: attached mtd1 (name "mtd=0", size 70 MiB)
  26. ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
  27. ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
  28. ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
  29. ubi0: good PEBs: 566, bad PEBs: 0, corrupted PEBs: 0
  30. ubi0: user volume: 4, internal volumes: 1, max. volumes count: 128
  31. ubi0: max/mean erase counter: 3503/1296, WL threshold: 4096, image sequence numb er: 1346646744
  32. ubi0: available PEBs: 155, total reserved PEBs: 411, PEBs reserved for bad PEB h andling: 20
  33.  
  34.  
  35. Secure boot enabled.
  36.  
  37. Read 0 bytes from volume part.safe to 44000000
  38. No size specified -> Using max size (16273408)
  39. bitflip found and corrected. (count: 1)
  40. Validating f84928 bytes @ addr 44000000
  41. Valid image
  42. ## Loading kernel from FIT Image at 42000028 ...
  43. Using 'config@5' configuration
  44. Verifying Hash Integrity ... OK
  45. Trying 'kernel@1' kernel subimage
  46. Description: Cryptid Kernel
  47. Type: Kernel Image
  48. Compression: uncompressed
  49. Data Start: 0x4200011c
  50. Data Size: 1935320 Bytes = 1.8 MiB
  51. Architecture: ARM
  52. OS: Linux
  53. Load Address: 0x44808000
  54. Entry Point: 0x44808000
  55. Hash algo: sha1
  56. Hash value: d94af4bdc37d7aee8fd47c2bd9503410e1a21eb7
  57. Verifying Hash Integrity ... sha1+ OK
  58. ## Loading ramdisk from FIT Image at 42000028 ...
  59. Using 'config@5' configuration
  60. Trying 'ramdisk@1' ramdisk subimage
  61. Description: Cryptid Ramdisk
  62. Type: RAMDisk Image
  63. Compression: lzma compressed
  64. Data Start: 0x421d89e0
  65. Data Size: 14186539 Bytes = 13.5 MiB
  66. Architecture: ARM
  67. OS: Linux
  68. Load Address: 0x44c08000
  69. Entry Point: 0x44c08000
  70. Hash algo: sha1
  71. Hash value: 17be163e7ec04a09c428103777727e4ecb085498
  72. Verifying Hash Integrity ... sha1+ OK
  73. Loading ramdisk from 0x421d89e0 to 0x44c08000
  74. ## Loading fdt from FIT Image at 42000028 ...
  75. Using 'config@5' configuration
  76. Trying 'fdt@5' fdt subimage
  77. Description: Citizen Snips Device Tree
  78. Type: Flat Device Tree
  79. Compression: uncompressed
  80. Data Start: 0x42f76e74
  81. Data Size: 22518 Bytes = 22 KiB
  82. Architecture: ARM
  83. Hash algo: sha1
  84. Hash value: b38fc938d70214f4534e7c842ac6715f43bcbc39
  85. Verifying Hash Integrity ... sha1+ OK
  86. Loading fdt from 0x42f76e74 to 0x44801000
  87. Booting using the fdt blob at 0x44801000
  88. Loading Kernel Image ... OK
  89. Loading Ramdisk to 4dd78000, end 4eaff82b ... OK
  90. Loading Device Tree to 4dd6f000, end 4dd777f5 ... OK
  91. Using machid 0x136b from environment
  92.  
  93. Starting kernel ...
  94.  
  95. Uncompressing Linux... done, booting the kernel.
  96. [ 0.000000] Booting Linux on physical CPU 0x0
  97. [ 0.000000] Linux version 4.4.302-meraki (oe-user@oe-host) (gcc version 9.3.0 (GCC) ) #1 SMP PREEMPT Mon Dec 12 18:57:18 UTC 2022
  98. [ 0.000000] CPU: ARMv7 Processor [512f04d0] revision 0 (ARMv7), cr=10c5787d
  99. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
  100. [ 0.000000] Machine model: Meraki MR42E
  101. [ 0.000000] Ignoring memory range 0x41500000 - 0x42000000
  102. [ 0.000000] bootconsole [earlycon0] enabled
  103. [ 0.000000] Reserved memory: OVERLAP DETECTED!
  104. [ 0.000000] wifi_dump@44000000 (0x44000000--0x44600000) overlaps with wigig_dump@44400000 (0x44400000--0x44600000)
  105. [ 0.000000] Memory policy: Data cache writealloc
  106. [ 0.000000] PERCPU: Embedded 11 pages/cpu @ddb0e000 s13964 r8192 d22900 u45056
  107. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 120130
  108. [ 0.000000] Kernel command line: loader=u-boot console=ttyMSM1,115200n8 ubi.mtd=ubi ubi.mtd=art clk_ignore_unused earlyprintk
  109. [ 0.000000] log_buf_len individual max cpu contribution: 131072 bytes
  110. [ 0.000000] log_buf_len total cpu_extra contributions: 131072 bytes
  111. [ 0.000000] log_buf_len min size: 131072 bytes
  112. [ 0.000000] log_buf_len: 262144 bytes
  113. [ 0.000000] early log buf free: 129452(98%)
  114. [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
  115. [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  116. [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  117. [ 0.000000] Memory: 459900K/484352K available (3658K kernel code, 244K rwdata, 1312K rodata, 204K init, 468K bss, 24452K reserved, 0K cma-reserved, 0K highmem)
  118. [ 0.000000] Virtual kernel memory layout:
  119. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  120. [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
  121. [ 0.000000] vmalloc : 0xde000000 - 0xff800000 ( 536 MB)
  122. [ 0.000000] lowmem : 0xc0000000 - 0xddf00000 ( 479 MB)
  123. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  124. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  125. [ 0.000000] .text : 0xc0208000 - 0xc06e2bc4 (4971 kB)
  126. [ 0.000000] .init : 0xc06e3000 - 0xc0716000 ( 204 kB)
  127. [ 0.000000] .data : 0xc0716000 - 0xc0753200 ( 245 kB)
  128. [ 0.000000] .bss : 0xc0756000 - 0xc07cb1a4 ( 469 kB)
  129. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
  130. [ 0.000000] Preemptible hierarchical RCU implementation.
  131. [ 0.000000] Build-time adjustment of leaf fanout to 32.
  132. [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
  133. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
  134. [ 0.000000] NR_IRQS:16 nr_irqs:16 16
  135. [ 0.000000] clocksource: dg_timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 305801671480 ns
  136. [ 0.000006] sched_clock: 32 bits at 6MHz, resolution 160ns, wraps every 343597383600ns
  137. [ 0.007985] Switching to timer-based delay loop, resolution 160ns
  138. [ 0.014402] Calibrating delay loop (skipped), value calculated using timer frequency.. 12.50 BogoMIPS (lpj=62500)
  139. [ 0.024476] pid_max: default: 32768 minimum: 301
  140. [ 0.029365] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
  141. [ 0.035850] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
  142. [ 0.043707] CPU: Testing write buffer coherency: ok
  143. [ 0.048170] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  144. [ 0.053785] Setting up static identity map for 0x422082c0 - 0x422082f4
  145. [ 0.148246] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  146. [ 0.148411] Brought up 2 CPUs
  147. [ 0.156159] SMP: Total of 2 processors activated (25.00 BogoMIPS).
  148. [ 0.162502] CPU: All CPU(s) started in SVC mode.
  149. [ 0.170138] devtmpfs: initialized
  150. [ 0.181726] VFP support v0.3: implementor 51 architecture 64 part 4d variant 2 rev 0
  151. [ 0.189084] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  152. [ 0.198588] futex hash table entries: 512 (order: 3, 32768 bytes)
  153. [ 0.204720] pinctrl core: initialized pinctrl subsystem
  154. [ 0.212409] NET: Registered protocol family 16
  155. [ 0.217224] DMA: preallocated 2048 KiB pool for atomic coherent allocations
  156. [ 0.254406] cpuidle: using governor ladder
  157. [ 0.285423] cpuidle: using governor menu
  158. [ 0.316683] qcom_rpm 108000.rpm: RPM firmware 1.0.161
  159. [ 0.361080] i2c-gpio soc:i2c@1: using pins 24 (SDA) and 25 (SCL)
  160. [ 0.366136] i2c-gpio soc:i2c@1: sending recovery sequence
  161. [ 0.373778] i2c-gpio soc:i2c@2: using pins 29 (SDA) and 30 (SCL)
  162. [ 0.381360] Bluetooth: Core ver 2.21
  163. [ 0.384252] NET: Registered protocol family 31
  164. [ 0.388496] Bluetooth: HCI device and connection manager initialized
  165. [ 0.395140] Bluetooth: HCI socket layer initialized
  166. [ 0.399877] Bluetooth: L2CAP socket layer initialized
  167. [ 0.405029] Bluetooth: SCO socket layer initialized
  168. [ 0.410296] clocksource: Switched to clocksource dg_timer
  169. [ 0.417736] NET: Registered protocol family 2
  170. [ 0.421499] IP idents hash table entries: 8192 (order: 4, 65536 bytes)
  171. [ 0.428470] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
  172. [ 0.435038] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
  173. [ 0.441529] TCP: Hash tables configured (established 4096 bind 4096)
  174. [ 0.447831] UDP hash table entries: 256 (order: 1, 8192 bytes)
  175. [ 0.453827] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
  176. [ 0.460218] NET: Registered protocol family 1
  177. [ 0.465433] Unpacking initramfs...
  178. [ 10.598137] Freeing initrd memory: 13856K
  179. [ 10.604036] Initialise system trusted keyring
  180. [ 10.753288] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  181. [ 10.766670] Key type asymmetric registered
  182. [ 10.769834] Asymmetric key parser 'x509' registered
  183. [ 10.775025] io scheduler noop registered
  184. [ 10.778775] io scheduler deadline registered (default)
  185. [ 10.786400] 1b500000.pci supply vdda not found, using dummy regulator
  186. [ 10.798367] 1b500000.pci supply vdda_phy not found, using dummy regulator
  187. [ 10.804429] 1b500000.pci supply vdda_refclk not found, using dummy regulator
  188. [ 10.812127] PCI host bridge /soc/pci@1b500000 ranges:
  189. [ 10.816479] IO 0x0fe00000..0x0fefffff -> 0x0fe00000
  190. [ 10.821780] MEM 0x08000000..0x0fdfffff -> 0x08000000
  191. [ 10.934255] qcom-pcie 1b500000.pci: link up
  192. [ 10.937929] qcom-pcie 1b500000.pci: PCI host bridge to bus 0000:00
  193. [ 10.943863] pci_bus 0000:00: root bus resource [bus 00-ff]
  194. [ 10.949307] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] (bus address [0xfe00000-0xfefffff])
  195. [ 10.958851] pci_bus 0000:00: root bus resource [mem 0x08000000-0x0fdfffff]
  196. [ 10.966498] PCI: bus0: Fast back to back transfers disabled
  197. [ 10.990849] PCI: bus1: Fast back to back transfers disabled
  198. [ 10.995691] pci 0000:00:00.0: BAR 8: assigned [mem 0x08000000-0x081fffff]
  199. [ 11.002445] pci 0000:01:00.0: BAR 0: assigned [mem 0x08000000-0x081fffff 64bit]
  200. [ 11.009822] pci 0000:00:00.0: PCI bridge to [bus 01]
  201. [ 11.014850] pci 0000:00:00.0: bridge window [mem 0x08000000-0x081fffff]
  202. [ 11.022250] pcieport 0000:00:00.0: Signaling PME through PCIe PME interrupt
  203. [ 11.028642] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
  204. [ 11.036412] 1b700000.pci supply vdda not found, using dummy regulator
  205. [ 11.042114] 1b700000.pci supply vdda_phy not found, using dummy regulator
  206. [ 11.048849] 1b700000.pci supply vdda_refclk not found, using dummy regulator
  207. [ 11.056478] PCI host bridge /soc/pci@1b700000 ranges:
  208. [ 11.061119] IO 0x31e00000..0x31efffff -> 0x31e00000
  209. [ 11.066229] MEM 0x2e000000..0x31dfffff -> 0x2e000000
  210. [ 11.179989] qcom-pcie 1b700000.pci: link up
  211. [ 11.183755] qcom-pcie 1b700000.pci: PCI host bridge to bus 0001:00
  212. [ 11.189489] pci_bus 0001:00: root bus resource [bus 00-ff]
  213. [ 11.195145] pci_bus 0001:00: root bus resource [mem 0x2e000000-0x31dfffff]
  214. [ 11.202790] PCI: bus0: Fast back to back transfers disabled
  215. [ 11.220864] PCI: bus1: Fast back to back transfers disabled
  216. [ 11.225800] pci 0001:00:00.0: BAR 8: assigned [mem 0x2e000000-0x2e1fffff]
  217. [ 11.232456] pci 0001:01:00.0: BAR 0: assigned [mem 0x2e000000-0x2e1fffff 64bit]
  218. [ 11.239828] pci 0001:00:00.0: PCI bridge to [bus 01]
  219. [ 11.244857] pci 0001:00:00.0: bridge window [mem 0x2e000000-0x2e1fffff]
  220. [ 11.252303] pcieport 0001:00:00.0: Signaling PME through PCIe PME interrupt
  221. [ 11.258655] pci 0001:01:00.0: Signaling PME through PCIe PME interrupt
  222. [ 11.266384] 1b900000.pci supply vdda not found, using dummy regulator
  223. [ 11.272105] 1b900000.pci supply vdda_phy not found, using dummy regulator
  224. [ 11.278816] 1b900000.pci supply vdda_refclk not found, using dummy regulator
  225. [ 11.286461] PCI host bridge /soc/pci@1b900000 ranges:
  226. [ 11.291108] IO 0x35e00000..0x35efffff -> 0x35e00000
  227. [ 11.296196] MEM 0x32000000..0x35dfffff -> 0x32000000
  228. [ 11.409946] qcom-pcie 1b900000.pci: link up
  229. [ 11.413732] qcom-pcie 1b900000.pci: PCI host bridge to bus 0002:00
  230. [ 11.419446] pci_bus 0002:00: root bus resource [bus 00-ff]
  231. [ 11.425104] pci_bus 0002:00: root bus resource [mem 0x32000000-0x35dfffff]
  232. [ 11.432748] PCI: bus0: Fast back to back transfers disabled
  233. [ 11.450876] PCI: bus1: Fast back to back transfers disabled
  234. [ 11.455916] pci 0002:00:00.0: BAR 8: assigned [mem 0x32000000-0x322fffff]
  235. [ 11.462488] pci 0002:01:00.0: BAR 0: assigned [mem 0x32000000-0x321fffff 64bit]
  236. [ 11.469850] pci 0002:01:00.0: BAR 6: assigned [mem 0x32200000-0x3220ffff pref]
  237. [ 11.477121] pci 0002:00:00.0: PCI bridge to [bus 01]
  238. [ 11.482186] pci 0002:00:00.0: bridge window [mem 0x32000000-0x322fffff]
  239. [ 11.489500] pcieport 0002:00:00.0: Signaling PME through PCIe PME interrupt
  240. [ 11.496069] pci 0002:01:00.0: Signaling PME through PCIe PME interrupt
  241. [ 11.509741] gsbi 12440000.gsbi: GSBI port protocol: 4 crci: 0
  242. [ 11.557721] gsbi 16300000.gsbi: GSBI port protocol: 6 crci: 0
  243. [ 11.563854] qcom_restart_reason qcom,restart_reason: loading qcom_restart_reason driver
  244. [ 11.572316] msm_serial 12450000.serial: msm_serial: detected port #0
  245. [ 11.577861] msm_serial 12450000.serial: uartclk = 1843200
  246. [ 11.589012] 12450000.serial: ttyMSM0 at MMIO 0x12450000 (irq = 205, base_baud = 115200) is a MSM
  247. [ 11.598224] msm_serial 16340000.serial: msm_serial: detected port #1
  248. [ 11.603810] msm_serial 16340000.serial: uartclk = 7372800
  249. [ 11.609154] 16340000.serial: ttyMSM1 at MMIO 0x16340000 (irq = 206, base_baud = 460800) is a MSM
  250. [ 11.618640] msm_serial: console setup on▒[ 11.622853] console [ttyMSM1] enabled
  251. [ 11.622853] console [ttyMSM1] enabled
  252. [ 11.629221] bootconsole [earlycon0] disabled
  253. [ 11.629221] bootconsole [earlycon0] disabled
  254. [ 11.638593] msm_serial: driver initialized
  255. [ 11.638636] Trying to register dev faulty etc
  256. [ 11.649435] at24 0-0056: 8192 byte 24c64 EEPROM, writable, 32 bytes/write
  257. [ 11.652225] nand: device found, Manufacturer ID: 0xc2, Chip ID: 0xa1
  258. [ 11.655215] nand: Macronix MX30UF1G18AC
  259. [ 11.668012] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
  260. [ 11.668206] 14 ofpart partitions found on MTD device qcom_nand.0
  261. [ 11.674586] Creating 14 MTD partitions on "qcom_nand.0":
  262. [ 11.680750] 0x000000040000-0x000000180000 : "mibib"
  263. [ 11.693361] 0x000000000000-0x000000040000 : "sbl1"
  264. [ 11.696106] 0x000000180000-0x0000002c0000 : "sbl2"
  265. [ 11.731604] 0x0000002c0000-0x000000540000 : "sbl3"
  266. [ 11.751669] 0x000000540000-0x000000660000 : "ddrconfig"
  267. [ 11.774564] 0x000000660000-0x000000780000 : "ssd"
  268. [ 11.796062] 0x000000780000-0x000000a00000 : "tz"
  269. [ 11.811312] 0x000000a00000-0x000000c80000 : "rpm"
  270. [ 11.842942] 0x000001fc0000-0x000002140000 : "u-boot"
  271. [ 11.882717] 0x0000021c0000-0x000002c40000 : "bootkernel1"
  272. [ 11.945063] 0x000002c40000-0x0000036c0000 : "bootkernel2"
  273. [ 11.986896] 0x0000036c0000-0x000007d80000 : "ubi"
  274. [ 12.082227] 0x000007d80000-0x000007f80000 : "art"
  275. [ 12.098416] 0x000000000000-0x000008000000 : "all"
  276. [ 12.245110] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
  277. [ 12.257909] input: soc:gpio_keys as /devices/platform/soc/soc:gpio_keys/input/input0
  278. [ 12.258641] i2c /dev entries driver
  279. [ 12.365899] Driver for 1-wire Dallas network protocol.
  280. [ 12.390962] ina2xx 0-0040: power monitor ina219 (Rshunt = 40000 uOhm)
  281. [ 12.397700] qcom_wdt 208a000.watchdog: restart_reason wdt:0 r:153
  282. [ 12.397761] qcom_wdt 208a000.watchdog: boot reason:0
  283. [ 12.419890] Bluetooth: HCI UART driver ver 2.3
  284. [ 12.419922] Bluetooth: HCI UART protocol H4 registered
  285. [ 12.431270] Speed bin: 0
  286. [ 12.431291] PVS bin: 1
  287. [ 12.462319] L2 @ QSB rate. Forcing new rate.
  288. [ 12.462473] L2 @ 384000 KHz
  289. [ 12.465780] CPU0 @ 800000 KHz
  290. [ 12.468176] CPU1 @ QSB rate. Forcing new rate.
  291. [ 12.491444] CPU1 @ 384000 KHz
  292. [ 12.492444] meraki-config soc:board-data: Meraki config device loaded
  293. [ 12.507409] NET: Registered protocol family 10
  294. [ 12.526890] NET: Registered protocol family 17
  295. [ 12.527047] Registering SWP/SWPB emulation handler
  296. [ 12.531770] Loading compiled-in X.509 certificates
  297. [ 12.555385] Loaded X.509 cert 'Cisco Meraki: Auto-generated kernel signing key: 36781dd0d8d0ab8bd287b662fed3b1791f636028'
  298. [ 12.572738] ubi0: attaching mtd11
  299. [ 13.017606] ubi0: scanning is finished
  300. [ 13.028438] ubi0: attached mtd11 (name "ubi", size 70 MiB)
  301. [ 13.028463] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
  302. [ 13.034776] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
  303. [ 13.039671] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
  304. [ 13.060527] ubi0: good PEBs: 566, bad PEBs: 0, corrupted PEBs: 0
  305. [ 13.060554] ubi0: user volume: 4, internal volumes: 1, max. volumes count: 128
  306. [ 13.065691] ubi0: max/mean erase counter: 3503/1296, WL threshold: 4096, image sequence number: 1346646744
  307. [ 13.079278] ubi0: available PEBs: 155, total reserved PEBs: 411, PEBs reserved for bad PEB handling: 20
  308. [ 13.082634] ubi0: background thread "ubi_bgt0d" started, PID 645
  309. [ 13.147307] ubi1: attaching mtd12
  310. [ 13.163633] ubi1: scanning is finished
  311. [ 13.172884] ubi1 warning: print_rsvd_warning: cannot reserve enough PEBs for bad PEB handling, reserved 2, need 20
  312. [ 13.175352] ubi1: attached mtd12 (name "art", size 2 MiB)
  313. [ 13.183522] ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
  314. [ 13.187589] ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
  315. [ 13.194768] ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
  316. [ 13.202700] ubi1: good PEBs: 16, bad PEBs: 0, corrupted PEBs: 0
  317. [ 13.207994] ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
  318. [ 13.214297] ubi1: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 974878079
  319. [ 13.221268] ubi1: available PEBs: 0, total reserved PEBs: 16, PEBs reserved for bad PEB handling: 2
  320. [ 13.230136] ubi1: background thread "ubi_bgt1d" started, PID 713
  321. [ 13.250704] hctosys: unable to open rtc device (rtc0)
  322. [ 13.256732] clk: Not disabling unused clocks
  323. [ 13.256830] devtmpfs: mounted
  324. [ 13.260403] Freeing unused kernel memory: 204K
  325. [ 13.304538] random: board_data_conf: uninitialized urandom read (4 bytes read, 57 bits of entropy available)
  326. [ 13.402953] random: board_data_conf: uninitialized urandom read (4 bytes read, 57 bits of entropy available)
  327. [ 13.531042] random: board_data_conf: uninitialized urandom read (4 bytes read, 57 bits of entropy available)
  328. [ 13.638065] random: board_data_conf: uninitialized urandom read (4 bytes read, 57 bits of entropy available)
  329. [ 13.730810] early_init: meraki_MR42E 000000000, (40) Citizen Snips, 0, Q2TD-BRR8-K36A, 0C:8D:DB:7A:35:33, arch:arm, board:cryptid, hw:MR42E, pid:736, ppid:734, fd1:/early_init.log, fd2:/early_init.log
  330. [ 13.753439] random: board_data_conf: uninitialized urandom read (4 bytes read, 57 bits of entropy available)
  331. [ 14.100780] UBIFS (ubi0:3): background thread "ubifs_bgt0_3" started, PID 942
  332. [ 14.136680] UBIFS (ubi0:3): recovery needed
  333. [ 14.258593] UBIFS (ubi0:3): recovery completed
  334. [ 14.258684] UBIFS (ubi0:3): UBIFS: mounted UBI device 0, volume 3, name "storage"
  335. [ 14.261987] UBIFS (ubi0:3): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
  336. [ 14.269484] UBIFS (ubi0:3): FS size: 7237632 bytes (6 MiB, 57 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs)
  337. [ 14.279448] UBIFS (ubi0:3): reserved for root: 341850 bytes (333 KiB)
  338. [ 14.289326] UBIFS (ubi0:3): media format: w4/r0 (latest is w4/r0), UUID 4CF80BB0-F24B-421B-BFE4-45E8EB7E7843, small LPT model
  339. [ 14.313773] random: board_data_conf: uninitialized urandom read (4 bytes read, 64 bits of entropy available)
  340. [ 14.404536] random: board_data_conf: uninitialized urandom read (4 bytes read, 64 bits of entropy available)
  341. [ 14.455678] w1_master_driver w1_bus_master1: w1_search: max_slave_count 64 reached, will continue next search.
  342. [ 14.495164] random: board_data_conf: uninitialized urandom read (4 bytes read, 64 bits of entropy available)
  343. [ 14.577225] early_init done
  344. [ 14.591413] random: serial_loginche: uninitialized urandom read (4 bytes read, 64 bits of entropy available)
  345. [ 14.644946] storage-recovery: /storage mounted RW
  346. WARNING! THIS CONSOLE IS LOGGED! UNAUTHORIZED ACCESS FORBIDDEN!
  347. [ 14.672930] random: board_data_conf: uninitialized urandom read (4 bytes read, 66 bits of entropy available)
  348. <Meraki> [ 15.133911] S05diagnostic: meraki_MR42E 000000000, (40) Citizen Snips, 0, Q2TD-BRR8-K36A, 0C:8D:DB:7A:35:33, arch:arm, board:cryptid, hw:MR42E, pid:977, ppid:954, fd1:/dev/kmsg, fd2:/dev/kmsg
  349. [ 15.243691] Ignoring manufacturing reset button check: Not in RMA or MFG mode
  350. [ 15.251507] S05diagnostic done
  351. [ 15.997328] S10boot: meraki_MR42E 000000000, (40) Citizen Snips, 0, Q2TD-BRR8-K36A, 0C:8D:DB:7A:35:33, arch:arm, board:cryptid, hw:MR42E, pid:1076, ppid:954, fd1:/dev/kmsg, fd2:/dev/kmsg
  352. [ 16.105669] Sat Jan 1 00:00:00 UTC 2000
  353. [ 16.138835] cp: can't stat '/run/*': No such file or directory
  354. [ 16.231080] Quick boot reason lookup:
  355. [ 16.251269] No valid safe config available or fallback disabled, remove unsafe config
  356. [ 16.266791] ip_local_port_range: prefer different parity for start/end values.
  357. [ 16.268003] sysctl: error: 'vm.extfrag_threshold' is an unknown key
  358. [ 16.288589] ICMPv6: process `sysctl' is using deprecated sysctl (syscall) net.ipv6.neigh.bond0.base_reachable_time - use net.ipv6.neigh.bond0.base_reachable_time_ms instead
  359. [ 16.349397] cat: can't open '/LINUX_KFOM_VERSION': No such file or directory
  360. [ 16.367830] 377+0 records in
  361. [ 16.367830] 377+0 records out
  362. [ 16.367900] 12064 bytes (11.8KB) copied, 0.008879 seconds, 1.3MB/s
  363. [ 16.388108] 377+0 records in
  364. [ 16.388108] 377+0 records out
  365. [ 16.388183] 12064 bytes (11.8KB) copied, 0.008765 seconds, 1.3MB/s
  366. [ 16.408380] 377+0 records in
  367. [ 16.408380] 377+0 records out
  368. [ 16.408450] 12064 bytes (11.8KB) copied, 0.008829 seconds, 1.3MB/s
  369. [ 18.597416] qca_nss_gmac: loading out-of-tree module taints kernel.
  370. [ 18.598132] **********************************************************
  371. [ 18.602613] * Driver :NSS GMAC Driver for RTL v(3.72a)
  372. [ 18.609080] * Version :1.0
  373. [ 18.614716] * Copyright :Copyright (c) 2013-2016 The Linux Foundation. All rights reserved.
  374. [ 18.617504] **********************************************************
  375. [ 18.673684] nss_driver - fw of size 417600 bytes copied to load addr: 40000000, nss_id : 0
  376. [ 18.674073] nss_driver - Turbo Support 1
  377. [ 18.680939] Supported Frequencies -
  378. [ 18.684998] 110Mhz 550Mhz
  379. [ 18.690373] 733Mhz [ 18.691243]
  380. [ 18.696778] qca-nss 36400000.nss: Direct firmware load for qca-nss1.bin failed with error -2
  381. [ 18.696807] bf041ea8: request_firmware failed with err code: -2
  382. [ 18.709605] qca-nss: probe of 36400000.nss failed with error -2
  383. [ 18.717632] node size 1 # items 2
  384. [ 18.717654] memory: 40000000 268435456 (avl 601387008) items 2
  385. [ 18.730112] insmod: can't insert '/lib/modules/qca-nss-clickmgr.ko': No such file or directory
  386. [ 18.774431] wired0: renamed from eth0
  387. [ 18.909091] IPv6: ADDRCONF(NETDEV_UP): wired0: link is not ready
  388. [ 18.910535] wired1: renamed from dummy0
  389. [ 19.156707] !!!!! {meraki_watchdog} meraki_watchdog set hardware watchdog timeout to 60
  390. [ 19.159111] vm.panic_on_oom = 1
  391. [ 19.163897] [2000-01-01 00:00:03.058] +sysctl -w vm.panic_on_oom=1
  392. [ 19.180478] proclikefs: unknown parameter 'cpu' ignored
  393. [ 19.391943] click: starting router thread pid 1427 (cc084d00)
  394. [ 19.687319] elts_meraki: module license 'unspecified' taints kernel.
  395. [ 19.687348] Disabling lock debugging due to kernel taint
  396. [ 19.799181] elts_meraki: unknown parameter 'cpu' ignored
  397. [ 19.888680] Single synchronous check for reset
  398. [ 19.985949] Serial: AMBA driver
  399. [ 20.109795] <NSS-CRYPTO>:module loaded (platform - IPQ806x, build - Build_ID - 10/10/24, 21:15:02)
  400. [ 20.109971] <NSS-CRYPTO>:Register with NSS driver-
  401. [ 20.195096]
  402. [ 20.200253] boot 181 build 30-202410102043-Gf49fc3fd-rel-drive board cryptid mac 0C:8D:DB:7A:35:33
  403. [ 20.205979] Module: mdio_bitbang .text=0xbf000000 .data= .bss=
  404. [ 20.208530] Module: mdio_gpio .text=0xbf004000 .data=0xbf004618 .bss=
  405. [ 20.214180] <NSS-CRYPTO>:NSS Firmware initialized
  406. [ 20.220760] <NSS-CRYPTO>:probing engine - 0
  407. [ 20.224068] Module: qca_nss_gmac .text=0xbf008000 .data=0xbf00f264 .bss=0xbf00f800
  408. [ 20.224553] Module: qca_nss_drv .text=0xbf01a000 .data=0xbf03d448 .bss=0xbf03e2c0
  409. [ 20.224880] Module: qca_nss_clickmgr .text= .data= .bss=
  410. [ 20.225261] Module: dummy .text=0xbf06e000 .data=0xbf06e590 .bss=
  411. [ 20.225675] Module: proclikefs .text=0xbf072000 .data= .bss=0xbf072c40
  412. [ 20.226157] Module: merakiclick .text=0xbf077000 .data=0xbf20adf0 .bss=0xbf20b100
  413. [ 20.226640] Module: elts_meraki .text=0xbf37b000 .data=0xbf7e12a0 .bss=0xbf7e3480
  414. [ 20.227115] Module: amba_pl010 .text=0xbfa63000 .data=0xbfa63b28 .bss=0xbfa63e00
  415. [ 20.227572] Module: bcmmdio .text=0xbfa68000 .data=0xbfa6857c .bss=0xbfa68840
  416. [ 20.227972] Module: echainiv .text=0xbfa6c000 .data=0xbfa6c348 .bss=
  417. [ 20.228474] Module: qca_nss_crypto .text=0xbfa70000 .data=0xbfa740d4 .bss=0xbfa744c0
  418. [ 20.229020] Module: qca_nss_cryptoapi_cfi .text=0xbfa7c000 .data=0xbfa809c0 .bss=0xbfa81600
  419. [ 20.229446] Module: reed_solomon .text=0xbfa87000 .data=0xbfa882f0 .bss=
  420. [ 20.239021] S10boot done
  421. [ 20.320887] <NSS-CRYPTO>:Device Tree node found
  422. [ 20.323559] <NSS-CRYPTO>:init completed for Pipe Pair[0]
  423. [ 20.327576] <NSS-CRYPTO>:init completed for Pipe Pair[1]
  424. [ 20.646196] wired0: 100 Mbps Full Duplex
  425. [ 20.646252] IPv6: ADDRCONF(NETDEV_CHANGE): wired0: link becomes ready
  426. [ 20.690170] S80meraki: meraki_MR42E 000000000, (40) Citizen Snips, 0, Q2TD-BRR8-K36A, 0C:8D:DB:7A:35:33, arch:arm, board:cryptid, hw:MR42E, pid:1601, ppid:954, fd1:/dev/kmsg, fd2:/dev/kmsg
  427. [ 22.590736] random: nonblocking pool is initialized
  428. [ 23.330521] nss_crypto_send_msg_sync[499]:no response received from NSS(type - 1)
  429. [ 23.330548] <NSS-CRYPTO>:Error in Engine Init
  430. [ 23.337025] nss-crypto: probe of 38000000.crypto failed with error -12
  431. [ 23.341580] <NSS-CRYPTO>:exiting probe due to previous error
  432. [ 23.347777] nss-crypto: probe of 38400000.crypto failed with error -12
  433. [ 23.353790] <NSS-CRYPTO>:exiting probe due to previous error
  434. [ 23.359933] nss-crypto: probe of 38800000.crypto failed with error -12
  435. [ 23.365927] <NSS-CRYPTO>:exiting probe due to previous error
  436. [ 23.372151] nss-crypto: probe of 38c00000.crypto failed with error -12
  437. [ 23.377997] nss_crypto_delayed_init[423]:bfa744cc:NSS Crypto probe failed, num_eng (0)
  438. [ 23.378136] pstore: Registered ramoops as persistent store backend
  439. [ 23.378141] ramoops: attached 0x40000@0x5ffc0000, ecc: 0/0
  440. [ 23.406020] RUNIT: installed, starting runsvdir...
  441. [ 23.459546] tail: can't open '/var/log/strongswan_meraki/current': No such file or directory
  442. [ 23.851184] ok: run: strongswan_meraki_log_trailer: (pid 1712) 0s, normally down
  443. [ 24.410229] down: /service/poder_agent: 1s; run: log: (pid 1700) 1s
  444. [ 24.410900] down: /service/radius_proxy_manager: 1s; run: log: (pid 1699) 1s
  445. [ 24.410900] run: /service/signed_object_fetch: (pid 1702) 1s; run: log: (pid 1698) 1s
  446. [ 24.410900] down: /service/strongswan_meraki: 1s; run: log: (pid 1692) 1s
  447. [ 24.410900] run: /service/strongswan_meraki_log_trailer: (pid 1712) 1s, normally down
  448. [ 24.428910] RUNIT: runsvdir has launched all supervisors
  449. [ 24.460086] tail: /var/log/strongswan_meraki/current has appeared; following end of new file
  450. [ 24.465978] opening /dev/ubivol/dev.crt: No such file or directory (2)
  451. [ 24.467598] not unlocked
  452. [ 24.485449] ciscotamservices not supported in this device
  453. [ 24.487268] ln: /usr/bin/slowfcgi: File exists
  454. [ 28.768534] !!!!! {/usr/bin/brain} [brain:wifi] unloading wlan driver
  455. [ 28.783988] !!!!! {/usr/bin/brain} [brain:wifi] loading wlan driver
  456. [ 28.806740] ath_spectral: Version 2.0.0
  457. [ 28.806740] Copyright (c) 2005-2009 Atheros Communications, Inc. All Rights Reserved
  458. [ 28.814086] ath_dfs: Version 2.0.0
  459. [ 28.814086] Copyright (c) 2005-2006 Atheros Communications, Inc. All Rights Reserved
  460. [ 28.927759] ath_ol_pci: (Atheros/multi-bss)
  461. [ 28.927861] ol_create_radio_netdev: Creating netdev wifi1
  462. [ 28.931541] hif_pci_enable_bus: con_mode = 0x0, device_id = 0x40
  463. [ 28.936463] ath_ol_pci 0000:01:00.0: enabling device (0140 -> 0142)
  464. [ 28.942652] hif_pci_enable_bus: hif_enable_pci done *********** AR900B *************hif_pci_enable_bus: hif_type = 0xb, target_type = 0x9hif_pci_enable_bus: hif_pci_probe_tgt_wakeup donehif_target_sync: Loop checking FW signalhif_target_sync: Got FW signal, retries = 0hif_config_ce: ce_init donehif_config_ce: X, ret = 0hif_set_hia: Ehif_set_hia_extnd: E
  465. [ 28.986081] chip_id 0x9 chip_revision 0x1
  466. [ 28.986970]
  467. [ 28.986970] CLOCK PLL skipped
  468. [ 28.991374] hif_set_hia_extnd: setting the target pll frac ffffffff intval ffffffff
  469. [ 28.995332] hif_set_hia_extnd: no frac provided, skipping pre-configuring PLL
  470. [ 29.003077] hif_set_hia_extnd: targ_clk is not provided, skipping pre-configuring PLL
  471. [ 29.012425] hif_pci_bus_configure: hif_set_hia donehif_configure_irq: Ehif_pci_configure_legacy_irq: Ehif_pci_configure_legacy_irq: X, ret = 0hif_enable: X OKhif_napi_create: NAPI structures initializedhif_napi_create: NAPI id 6 created for pipe 5qca_napi_create: napi instance 32 created on pipe 4
  472. [ 29.039845] hif_napi_event: received evnt: CONF cmd; v = 1 (state=0x1)hif_napi_event: setting configuration to ON
  473. __ol_ath_attach() Allocated scn dc9404c0
  474. [ 29.054355] __ol_ath_attach: dev name wifi1
  475. [ 29.058077] ol_ath_attach interface_id 1
  476. [ 29.062776] ol_target_init() BMI inited.
  477. [ 29.066513] ol_target_init() BMI Get Target Info.
  478. [ 29.070320] Chip id: 0x9, chip version: 0x1000000
  479. [ 29.074982]
  480. [ 29.074982] CE WAR Disabled
  481. [ 29.079915] NUM_DEV=1 FWMODE=0x2 FWSUBMODE=0x0 FWBR_BUF 0
  482. [ 29.085237] ol_target_init() configure Target .
  483. [ 29.089424]
  484. [ 29.089424] Target Version is 1000000
  485. [ 29.093767]
  486. [ 29.093767] Flash Download Address c0000
  487. [ 29.099064] ol_transfer_bin_file: flash data file defined
  488. [ 29.104935] ol_transfer_bin_file[3879] Get Caldata for wifi1.
  489. [ 29.110099] qdf_fs_read[59], Open File /tmp/wifi1.caldata SUCCESS!!file system magic:16914836super blocksize:4096inode 4369file size:12064ol_transfer_bin_file 3940: Download Flash data len 12064
  490. [ 29.128114] Board extended Data download address: 0x0
  491. [ 29.153468]
  492. [ 29.153468] Board data initialized
  493. [ 29.153667] ol_ath_download_firmware: Download OTP, flash download ADDRESS 0xc0000
  494. [ 29.157511]
  495. [ 29.157511] Selecting OTP binary for CHIP Version 1
  496. [ 29.165119] ol_transfer_bin_file 3750: downloading file 0, Download data len 11240
  497. [ 29.206980]
  498. [ 29.206980] First OTP send param 8000
  499. [ 29.210303] ol_ath_download_firmware :First OTP download and Execute is good address:0x8400 return param 4660
  500. [ 29.211117] ol_ath_download_firmware:##Board Id 1 , CHIP Id 1
  501. [ 29.221601] ol_ath_download_firmware: BOARDDATA DOWNLOAD TO address 0xc0000
  502. [ 29.226876] ol_transfer_bin_file: Board Data File download to address=0xc0000 file name=AR900B/hw.2/mr42e/boardData_AR900B_CUS239_5G_v2_001.bin
  503. [ 29.233965] ol_transfer_bin_file 3750: downloading file 3, Download data len 12064
  504. [ 29.246742] Board extended Data download address: 0x0
  505. [ 29.274811] ol_ath_download_firmware: Using 0x1234 for the remainder of init
  506. [ 29.274835]
  507. [ 29.274835] Selecting OTP binary for CHIP Version 1
  508. [ 29.281346] ol_transfer_bin_file 3750: downloading file 0, Download data len 11240
  509. [ 29.321899]
  510. [ 29.321899] [Flash] : Ignore Module param
  511. [ 29.321922]
  512. [ 29.321922] Second otp download Param 10000
  513. [ 29.337194] ol_ath_download_firmware : Second OTP download and Execute is good, param=0x0
  514. [ 29.337219]
  515. [ 29.337219] Mission mode: Firmware CHIP Version 1
  516. [ 29.345334] ol_swap_wlan_memory_expansion: length:204461 size_left:204481 dma_size_left:262144 fw_temp:e1842004 fw_entry_size:204485
  517. [ 29.350632] ol_swap_wlan_memory_expansion: dma_virt_addr :e1801000 fw_temp: e1842008 length: 204461
  518. [ 29.363129] Swap: bytes_left to copy: fw:16; dma_page:57683
  519. [ 29.371533] ol_swap_wlan_memory_expansion: length:0 size_left:12 dma_size_left:57683 fw_temp:e1873eb9 fw_entry_size:204485
  520. [ 29.377024] Swap: wrong length read:0
  521. [ 29.388472] ol_swap_wlan_memory_expansion: Swap total_bytes copied: 204461 Target address 419540
  522. [ 29.392018] scn=dc9404c0 target_write_addr=419540 seg_info=dc2fa010
  523. [ 29.401092] ol_transfer_swap_struct:Code swap structure successfully downloaded for bin type =2
  524. [ 29.407135] bin_filename=AR900B/hw.2/athwlan.bin swap_filename=/lib/firmware/AR900B/hw.2/athwlan.codeswap.bin
  525. [ 29.416099] ol_transfer_bin_file: Downloading firmware file: AR900B/hw.2/athwlan.bin
  526. [ 29.426434] ol_transfer_bin_file 3750: downloading file 1, Download data len 369372
  527. [ 30.544463] ol_target_init() Download FW done.
  528. [ 30.544503]
  529. [ 30.544503] ol_ath_copy_tgt_iram() iram read paddr: 0x980000 host paddr 0x44200000 Radio id 1
  530. [ 30.732243] ol_ath_attach() WMI attached. wmi_handle dbcb2000
  531. [ 30.732269] wmi_unified_register_event_handler: Event id 62 is unavailable
  532. [ 30.736963] +htc_create .. HIF :dc980000-htc_create: (0xdcccb800)
  533. [ 30.747624] htc_wmi_init() HT Create . dcccb800
  534. [ 30.750142] htc_wmi_init 7948 host_enable 0 nss_nwifi_offload 0
  535. [ 30.754704] ol_ath_set_default_tgt_config : AC Minfree buffer allocation through module param (umac.ko)
  536. [ 30.760315] OL_ACBKMinfree : 0
  537. [ 30.769901] OL_ACBEMinfree : 0
  538. [ 30.776384] OL_ACVIMinfree : 0
  539. [ 30.776398] OL_ACVOMinfree : 0
  540. [ 30.779057] hif_enable_fastpath, Enabling fastpath mode
  541. [ 30.782457] +HWT
  542. [ 30.787566] hif_completion_thread_startup: pipe_num:0 pipe_info:0xdc984878hif_completion_thread_startup: pipe_num:3 pipe_info:0xdc984950hif_completion_thread_startup: pipe_num:4 pipe_info:0xdc984998
  543. [ 30.807006] -HWT
  544. [ 30.807043] Startup Mode-0 set
  545. [ 30.808918]
  546. [ 30.808918] <=== cfg max peer id 1056 ====>
  547. [ 30.812934] htt_peer_map_timer_init Enter pdev dca28000 hrtimer dca2a618
  548. [ 30.817653]
  549. [ 30.817653] htt_alloc_peer_map_mem : Alloc Success : host q vaddr dcc0a000 paddr 5ec0a000
  550. [ 30.824643]
  551. [ 30.824643] htt_alloc_peer_map_mem : Flush Interval Configured to 256 pkts
  552. [ 30.838748] ol_txrx_pdev_attach: 2500 tx desc's allocated ; range starts from db500000
  553. [ 30.843722] Firmware_Build_Number:50
  554. [ 30.850186] FW wireless modes: 0x1f9001
  555. [ 30.860643] num_rf_chain:0x00000003 ht_cap_info:0x0000185b vht_cap_info:0x339a79b2 vht_supp_mcs:0x0000ffea
  556. [ 30.867460] wmi_service_coex_gpio 0, wmi_service_4_wire_coex_support 0, coex_version 0
  557. [ 30.869635]
  558. [ 30.869635] Sending Ext resource cfg: HOST PLATFORM as 0
  559. [ 30.869635] fw_feature_bitmap as 50 to TGT
  560. [ 30.877473] ol_ath_service_ready_event: tt_support: 1
  561. [ 30.888504] ol_ath_service_ready_event: periodic_chan_stats: 0
  562. [ 30.893438] ol_ath_service_ready_event: sw_cal_support_check_flag: 1
  563. [ 30.899063] Peer Caching Enabled ; num_peers = 257, num_active_peers = 52 num_tids = 104, num_vdevs = 17
  564. [ 30.905680] EXT NSS Supported
  565. [ 30.915279] Mesh Supported
  566. [ 30.917894] idx 1 req 2 num_units 1 num_unit_info 12 unit size 256 actual units 53
  567. [ 30.920608] idx 2 req 3 num_units 1 num_unit_info 12 unit size 1024 actual units 53
  568. [ 30.928538] idx 3 req 4 num_units 1 num_unit_info 12 unit size 4096 actual units 53
  569. [ 30.936452] idx 0 req 1 num_units 0 num_unit_info 2 unit size 1272 actual units 258
  570. [ 30.944331] idx 4 req 6 num_units 35 num_unit_info 0 unit size 3072 actual units 35
  571. [ 30.952025] idx 5 req 7 num_units 1 num_unit_info 0 unit size 6144 actual units 1
  572. [ 30.959837] idx 6 req 5 num_units 0 num_unit_info 2 unit size 1928 actual units 258
  573. [ 30.967465] Support not added yet for Service 91
  574. [ 30.975225] Support not added yet for Service 92
  575. [ 30.979792] No EXT_MSG send INIT now
  576. [ 30.984495] chunk 0 len 13568 requested , ptr 0x4e108000
  577. [ 30.987961] chunk 1 len 54272 requested , ptr 0x5d580000
  578. [ 30.993325] chunk 2 len 217088 requested , ptr 0x5d5c0000
  579. [ 30.998623] chunk 3 len 164088 requested , ptr 0x5d600000
  580. [ 31.004109] chunk 4 len 164088 requested , ptr 0x5d640000
  581. [ 31.009604] chunk 5 len 107520 requested , ptr 0x5d5a0000
  582. [ 31.015042] chunk 6 len 6144 requested , ptr 0x4e166000
  583. [ 31.020409] chunk 7 len 248712 requested , ptr 0x5d680000
  584. [ 31.025974] chunk 8 len 248712 requested , ptr 0x5d6c0000
  585. [ 31.031253] chunk 9 len 0 requested , ptr 0x44200000
  586. [ 31.036741] smart_log_init: Smart logging Enabled buf=dca60000 (size=65536)
  587. [ 31.108239] Version = 16777216 3 status = 0
  588. [ 31.108337] ol_ath_connect_htc() WMI is ready
  589. [ 31.111648] htt_h2t_frag_desc_bank_cfg_msg - HTT_H2T_MSG_TYPE_FRAG_DESC_BANK_CFG sent to FW for radio ID = 1
  590. [ 31.111666] target uses HTT version 2.2; host uses 2.2
  591. [ 31.130900] : ol_ath_attach :wmi_pdev_param_xlnawar_enable FW sent
  592. [ 31.130932] ol_ath_attach() connect HTC.
  593. [ 31.136892] bypasswmi : 0
  594. [ 31.144776] ol_regdmn_start: reg-domain param: regdmn=0, countryName=, wModeSelect=FFFFFFFF, netBand=FFFFFFFF, extendedChanMode=0.
  595. [ 31.144879] Skipping VHT80 channel 5825
  596. [ 31.155936] freq=58
  597. [ 31.159165] freq=106
  598. [ 31.161735] freq=122
  599. [ 31.163788] freq=138
  600. [ 31.166062] acfg_attach: 3013: Netlink socket created:cc3d7400
  601. [ 31.168303] SPECTRAL : get_capability not registered
  602. [ 31.177737] HAL_CAP_PHYDIAG : Capable
  603. [ 31.179162] SPECTRAL : Need to fix the capablity check for RADAR (spectral_attach : 237)
  604. [ 31.182726] SPECTRAL : get_capability not registered
  605. [ 31.190875] HAL_CAP_RADAR : Capable
  606. [ 31.195811] SPECTRAL : Need to fix the capablity check for SPECTRAL
  607. [ 31.195811] (spectral_attach : 242)
  608. [ 31.199371] SPECTRAL : get_capability not registered
  609. [ 31.210503] HAL_CAP_SPECTRAL_SCAN : Capable
  610. [ 31.214180] SPECTRAL : get_tsf64 not registered
  611. [ 31.218098] spectral_init_netlink 78 NULL SKB
  612. [ 31.222893] Green-AP : Green-AP : Attached
  613. [ 31.222893]
  614. [ 31.227129] Green-AP : Attached
  615. [ 31.232791] rate power table override is only supported for AR98XX
  616. [ 31.235731] ol_if_dfs_attach: called; ptr=db56198c, radar_info=d8875bf0
  617. [ 31.242073] dfs_attach: event log enabled by default
  618. [ 31.248672] >>>> CB Set (null)
  619. [ 31.254091] ol_ath_attach() UMAC attach .
  620. [ 31.256831]
  621. [ 31.256831] BURSTING enabled by default
  622. [ 31.261036] ACS not enabled
  623. [ 31.266185] __ol_ath_attach: needed_headroom reservation 60
  624. [ 31.272559] ol_ath_thermal_mitigation_attach: --
  625. [ 31.274656] ol_ath_pci_probe num_radios=0, wifi_radios[0].sc = dc9404c0 wifi_radio_type = 2
  626. [ 31.279317] ath_sysfs_diag_init: diag_fsattr
  627. [ 31.287554] ol_create_radio_netdev: Creating netdev wifi0
  628. [ 31.292094] hif_pci_enable_bus: con_mode = 0x0, device_id = 0x40
  629. [ 31.297443] ath_ol_pci 0001:01:00.0: enabling device (0140 -> 0142)
  630. [ 31.303352] hif_pci_enable_bus: hif_enable_pci done *********** AR900B *************hif_pci_enable_bus: hif_type = 0xb, target_type = 0x9hif_pci_enable_bus: hif_pci_probe_tgt_wakeup donehif_target_sync: Loop checking FW signalhif_target_sync: Got FW signal, retries = 0hif_config_ce: ce_init donehif_config_ce: X, ret = 0hif_set_hia: Ehif_set_hia_extnd: E
  631. [ 31.346929] chip_id 0x9 chip_revision 0x1
  632. [ 31.347819]
  633. [ 31.347819] CLOCK PLL skipped
  634. [ 31.351906] hif_set_hia_extnd: setting the target pll frac ffffffff intval ffffffff
  635. [ 31.356164] hif_set_hia_extnd: no frac provided, skipping pre-configuring PLL
  636. [ 31.363886] hif_set_hia_extnd: targ_clk is not provided, skipping pre-configuring PLL
  637. [ 31.373248] hif_pci_bus_configure: hif_set_hia donehif_configure_irq: Ehif_pci_configure_legacy_irq: Ehif_pci_configure_legacy_irq: X, ret = 0hif_enable: X OKhif_napi_create: NAPI structures initializedhif_napi_create: NAPI id 6 created for pipe 5qca_napi_create: napi instance 32 created on pipe 4
  638. [ 31.400772] hif_napi_event: received evnt: CONF cmd; v = 1 (state=0x1)hif_napi_event: setting configuration to ON
  639. __ol_ath_attach() Allocated scn db7804c0
  640. [ 31.415195] __ol_ath_attach: dev name wifi0
  641. [ 31.418932] ol_ath_attach interface_id 0
  642. [ 31.433631] ol_target_init() BMI inited.
  643. [ 31.433746] ol_target_init() BMI Get Target Info.
  644. [ 31.436625] Chip id: 0x9, chip version: 0x1000000
  645. [ 31.441295]
  646. [ 31.441295] CE WAR Disabled
  647. [ 31.446053] NUM_DEV=1 FWMODE=0x2 FWSUBMODE=0x0 FWBR_BUF 0
  648. [ 31.450434] ol_target_init() configure Target .
  649. [ 31.455833]
  650. [ 31.455833] Target Version is 1000000
  651. [ 31.459984]
  652. [ 31.459984] Flash Download Address c0000
  653. [ 31.465258] ol_transfer_bin_file: flash data file defined
  654. [ 31.471189] ol_transfer_bin_file[3879] Get Caldata for wifi0.
  655. [ 31.476412] qdf_fs_read[59], Open File /tmp/wifi0.caldata SUCCESS!!file system magic:16914836super blocksize:4096inode 3560file size:12064ol_transfer_bin_file 3940: Download Flash data len 12064
  656. [ 31.494426] Board extended Data download address: 0x0
  657. [ 31.519576]
  658. [ 31.519576] Board data initialized
  659. [ 31.519757] ol_ath_download_firmware: Download OTP, flash download ADDRESS 0xc0000
  660. [ 31.523698]
  661. [ 31.523698] Selecting OTP binary for CHIP Version 1
  662. [ 31.531221] ol_transfer_bin_file 3750: downloading file 0, Download data len 11240
  663. [ 31.572026]
  664. [ 31.572026] First OTP send param 8000
  665. [ 31.575336] ol_ath_download_firmware :First OTP download and Execute is good address:0x8800 return param 4660
  666. [ 31.576070] ol_ath_download_firmware:##Board Id 2 , CHIP Id 1
  667. [ 31.586441] ol_ath_download_firmware: BOARDDATA DOWNLOAD TO address 0xc0000
  668. [ 31.591992] ol_transfer_bin_file: Board Data File download to address=0xc0000 file name=AR900B/hw.2/mr42e/boardData_AR900B_CUS260_2G_v2_002.bin
  669. [ 31.598740] ol_transfer_bin_file 3750: downloading file 3, Download data len 12064
  670. [ 31.611770] Board extended Data download address: 0x0
  671. [ 31.639671] ol_ath_download_firmware: Using 0x1234 for the remainder of init
  672. [ 31.639694]
  673. [ 31.639694] Selecting OTP binary for CHIP Version 1
  674. [ 31.645975] ol_transfer_bin_file 3750: downloading file 0, Download data len 11240
  675. [ 31.686559]
  676. [ 31.686559] [Flash] : Ignore Module param
  677. [ 31.686582]
  678. [ 31.686582] Second otp download Param 10000
  679. [ 31.702059] ol_ath_download_firmware : Second OTP download and Execute is good, param=0x0
  680. [ 31.702085]
  681. [ 31.702085] Mission mode: Firmware CHIP Version 1
  682. [ 31.709932] ol_swap_wlan_memory_expansion: length:204461 size_left:204481 dma_size_left:262144 fw_temp:e1df5004 fw_entry_size:204485
  683. [ 31.715520] ol_swap_wlan_memory_expansion: dma_virt_addr :e1db4000 fw_temp: e1df5008 length: 204461
  684. [ 31.727727] Swap: bytes_left to copy: fw:16; dma_page:57683
  685. [ 31.736434] ol_swap_wlan_memory_expansion: length:0 size_left:12 dma_size_left:57683 fw_temp:e1e26eb9 fw_entry_size:204485
  686. [ 31.741950] Swap: wrong length read:0
  687. [ 31.753088] ol_swap_wlan_memory_expansion: Swap total_bytes copied: 204461 Target address 419540
  688. [ 31.756814] scn=db7804c0 target_write_addr=419540 seg_info=d8378a10
  689. [ 31.765806] [wifi1] [ 31.772004] ol_transfer_swap_struct:Code swap structure successfully downloaded for bin type =2
  690. [ 31.772008] bin_filename=AR900B/hw.2/athwlan.bin swap_filename=/lib/firmware/AR900B/hw.2/athwlan.codeswap.bin
  691. [ 31.772034] ol_transfer_bin_file: Downloading firmware file: AR900B/hw.2/athwlan.bin
  692. [ 31.772501] ol_transfer_bin_file 3750: downloading file 1, Download data len 369372
  693.  
  694. [ 31.800728] FWLOG: [20685] WAL_DBGID_RST_STATS ( 0x1, 0x1, 0x1464, 0x0 )
  695. [ 31.814491] [wifi1] FWLOG: [20755] WAL_DBGID_TX_AC_BUFFER_SET ( 0x3, 0x1e, 0x94c, 0x94c, 0x0 )
  696. [ 31.823085] [wifi1] FWLOG: [20755] WAL_DBGID_TX_AC_BUFFER_SET ( 0x12, 0x1e, 0x94c, 0x94c, 0x0 )
  697. [ 31.831801] [wifi1] FWLOG: [20755] WAL_DBGID_TX_AC_BUFFER_SET ( 0x45, 0x1e, 0x94c, 0x94c, 0x0 )
  698. [ 31.840470] [wifi1] FWLOG: [20755] WAL_DBGID_TX_AC_BUFFER_SET ( 0x67, 0x1e, 0x94c, 0x94c, 0x0 )
  699. [ 31.849153] [wifi1] FWLOG: [20788] WAL_DBGID_RST_STATS ( 0x2, 0x2, 0x1464, 0x0 )
  700. [ 31.856504] [wifi1] FWLOG: [20800] WAL_DBGID_PDEV_INFO_PRINT ( 0xc001c001, 0x1 )
  701. [ 31.863884] [wifi1] FWLOG: [20829] WAL_DBGID_PDEV_INFO_PRINT ( 0x3a, 0xa10, 0x160, 0x10, 0x0 )
  702. [ 31.872502] [wifi1] FWLOG: [20829] WAL_DBGID_PDEV_INFO_PRINT ( 0x3a, 0x10, 0x0, 0x10, 0x0 )
  703. [ 32.962626] ol_target_init() Download FW done.
  704. [ 32.962666]
  705. [ 32.962666] ol_ath_copy_tgt_iram() iram read paddr: 0x980000 host paddr 0x44000000 Radio id 0
  706. [ 33.129922] ol_ath_attach() WMI attached. wmi_handle dc9b0000
  707. [ 33.129948] wmi_unified_register_event_handler: Event id 62 is unavailable
  708. [ 33.134746] +htc_create .. HIF :db590000-htc_create: (0xdc929800)
  709. [ 33.145258] htc_wmi_init() HT Create . dc929800
  710. [ 33.147832] htc_wmi_init 7948 host_enable 0 nss_nwifi_offload 0
  711. [ 33.152179] ol_ath_set_default_tgt_config : AC Minfree buffer allocation through module param (umac.ko)
  712. [ 33.158020] OL_ACBKMinfree : 0
  713. [ 33.167496] OL_ACBEMinfree : 0
  714. [ 33.170578] OL_ACVIMinfree : 0
  715. [ 33.173635] OL_ACVOMinfree : 0
  716. [ 33.176753] hif_enable_fastpath, Enabling fastpath mode
  717. [ 33.179882] +HWT
  718. [ 33.185281] hif_completion_thread_startup: pipe_num:0 pipe_info:0xdb594878hif_completion_thread_startup: pipe_num:3 pipe_info:0xdb594950hif_completion_thread_startup: pipe_num:4 pipe_info:0xdb594998
  719. [ 33.202741] -HWT
  720. [ 33.205140] Startup Mode-0 set
  721. [ 33.207105]
  722. [ 33.207105] <=== cfg max peer id 1056 ====>
  723. [ 33.210897] htt_peer_map_timer_init Enter pdev dba3c000 hrtimer dba3e618
  724. [ 33.215794]
  725. [ 33.215794] htt_alloc_peer_map_mem : Alloc Success : host q vaddr dcc09000 paddr 5ec09000
  726. [ 33.226500]
  727. [ 33.226500] htt_alloc_peer_map_mem : Flush Interval Configured to 256 pkts
  728. [ 33.233181] ol_txrx_pdev_attach: 2500 tx desc's allocated ; range starts from d7d60000
  729. [ 33.241792] Firmware_Build_Number:50
  730. [ 33.248306] FW wireless modes: 0x680c
  731. [ 33.260627] num_rf_chain:0x00000003 ht_cap_info:0x0000185b vht_cap_info:0x339a79b2 vht_supp_mcs:0x0000ffea
  732. [ 33.267440] wmi_service_coex_gpio 0, wmi_service_4_wire_coex_support 0, coex_version 0
  733. [ 33.269617]
  734. [ 33.269617] Sending Ext resource cfg: HOST PLATFORM as 0
  735. [ 33.269617] fw_feature_bitmap as 50 to TGT
  736. [ 33.290686] ol_ath_service_ready_event: tt_support: 1
  737. [ 33.290752] ol_ath_service_ready_event: periodic_chan_stats: 0
  738. [ 33.294752] ol_ath_service_ready_event: sw_cal_support_check_flag: 1
  739. [ 33.300490] Peer Caching Enabled ; num_peers = 257, num_active_peers = 52 num_tids = 104, num_vdevs = 17
  740. [ 33.313634] EXT NSS Supported
  741. [ 33.316468] Mesh Supported
  742. [ 33.319327] idx 1 req 2 num_units 1 num_unit_info 12 unit size 256 actual units 53
  743. [ 33.322019] idx 2 req 3 num_units 1 num_unit_info 12 unit size 1024 actual units 53
  744. [ 33.329972] idx 3 req 4 num_units 1 num_unit_info 12 unit size 4096 actual units 53
  745. [ 33.350845] idx 0 req 1 num_units 0 num_unit_info 2 unit size 1272 actual units 258
  746. [ 33.351053] idx 4 req 6 num_units 35 num_unit_info 0 unit size 3072 actual units 35
  747. [ 33.357759] idx 5 req 7 num_units 1 num_unit_info 0 unit size 6144 actual units 1
  748. [ 33.365722] idx 6 req 5 num_units 0 num_unit_info 2 unit size 1928 actual units 258
  749. [ 33.373234] Support not added yet for Service 91
  750. [ 33.381154] Support not added yet for Service 92
  751. [ 33.385627] No EXT_MSG send INIT now
  752. [ 33.390229] chunk 0 len 13568 requested , ptr 0x59d58000
  753. [ 33.393847] chunk 1 len 54272 requested , ptr 0x59dd0000
  754. [ 33.399073] chunk 2 len 217088 requested , ptr 0x59e00000
  755. [ 33.404538] chunk 3 len 164088 requested , ptr 0x59e40000
  756. [ 33.409846] chunk 4 len 164088 requested , ptr 0x59e80000
  757. [ 33.415382] chunk 5 len 107520 requested , ptr 0x59de0000
  758. [ 33.420844] chunk 6 len 6144 requested , ptr 0x4e132000
  759. [ 33.426244] chunk 7 len 248712 requested , ptr 0x59ec0000
  760. [ 33.431775] chunk 8 len 248712 requested , ptr 0x59f00000
  761. [ 33.437023] chunk 9 len 0 requested , ptr 0x44000000
  762. [ 33.442631] smart_log_init: Smart logging Enabled buf=db570000 (size=65536)
  763. [ 33.514019] Version = 16777216 3 status = 0
  764. [ 33.514081] ol_ath_connect_htc() WMI is ready
  765. [ 33.517436] htt_h2t_frag_desc_bank_cfg_msg - HTT_H2T_MSG_TYPE_FRAG_DESC_BANK_CFG sent to FW for radio ID = 0
  766. [ 33.517453] target uses HTT version 2.2; host uses 2.2
  767. [ 33.537322] : ol_ath_attach :wmi_pdev_param_xlnawar_enable FW sent
  768. [ 33.537356] ol_ath_attach() connect HTC.
  769. [ 33.542748] bypasswmi : 0
  770. [ 33.546799] ol_regdmn_start: reg-domain param: regdmn=0, countryName=, wModeSelect=FFFFFFFF, netBand=FFFFFFFF, extendedChanMode=0.
  771. [ 33.549571] acfg_attach: Offload using existing sock cc3d7400
  772. [ 33.561200] SPECTRAL : get_capability not registered
  773. [ 33.566848] HAL_CAP_PHYDIAG : Capable
  774. [ 33.572107] SPECTRAL : Need to fix the capablity check for RADAR (spectral_attach : 237)
  775. [ 33.575448] SPECTRAL : get_capability not registered
  776. [ 33.583719] HAL_CAP_RADAR : Capable
  777. [ 33.588572] SPECTRAL : Need to fix the capablity check for SPECTRAL
  778. [ 33.588572] (spectral_attach : 242)
  779. [ 33.592207] SPECTRAL : get_capability not registered
  780. [ 33.602120] HAL_CAP_SPECTRAL_SCAN : Capable
  781. [ 33.606968] SPECTRAL : get_tsf64 not registered
  782. [ 33.610965] spectral_init_netlink 78 NULL SKB
  783. [ 33.615374] Green-AP : Green-AP : Attached
  784. [ 33.615374]
  785. [ 33.619891] Green-AP : Attached
  786. [ 33.625387] rate power table override is only supported for AR98XX
  787. [ 33.628526] ol_if_dfs_attach: called; ptr=db8c198c, radar_info=d8875bf0
  788. [ 33.634743] dfs_attach: event log enabled by default
  789. [ 33.641540] >>>> CB Set (null)
  790. [ 33.646511] ol_ath_attach() UMAC attach .
  791. [ 33.649583]
  792. [ 33.649583] BURSTING enabled by default
  793. [ 33.653740] ACS not enabled
  794. [ 33.658951] __ol_ath_attach: needed_headroom reservation 60
  795. [ 33.662644] ol_ath_thermal_mitigation_attach: --
  796. [ 33.667335] ol_ath_pci_probe num_radios=1, wifi_radios[1].sc = db7804c0 wifi_radio_type = 2
  797. [ 33.674688] ath_sysfs_diag_init: diag_fsattr
  798. [ 33.680214] ol_create_radio_netdev: Creating netdev wifi2
  799. [ 33.684862] hif_pci_enable_bus: con_mode = 0x0, device_id = 0x50
  800. [ 33.690085] ath_ol_pci 0002:01:00.0: enabling device (0140 -> 0142)
  801. [ 33.696124] hif_pci_enable_bus: hif_enable_pci done *********** AR9887 **************hif_pci_enable_bus: hif_type = 0x6, target_type = 0x7hif_pci_enable_bus: hif_pci_probe_tgt_wakeup donehif_target_sync: Loop checking FW signalhif_target_sync: Got FW signal, retries = dhif_config_ce: ce_init donehif_config_ce: X, ret = 0hif_set_hia: Ehif_set_hia_extnd: E
  802. [ 33.865443]
  803. [ 33.865443] CLOCK PLL skipped
  804. [ 33.868371] hif_pci_bus_configure: hif_set_hia donehif_configure_irq: Ehif_pci_configure_legacy_irq: Ehif_pci_configure_legacy_irq: X, ret = 0hif_enable: X OKhif_napi_create: NAPI structures initializedhif_napi_create: NAPI id 6 created for pipe 5qca_napi_create: napi instance 32 created on pipe 4
  805. [ 33.892732] hif_napi_event: received evnt: CONF cmd; v = 1 (state=0x1)hif_napi_event: setting configuration to ON
  806. __ol_ath_attach() Allocated scn d78004c0
  807. [ 33.907149] __ol_ath_attach: dev name wifi2
  808. [ 33.910940] ol_ath_attach interface_id 2
  809. [ 33.915165] ol_target_init() BMI inited.
  810. [ 33.919299] ol_target_init() BMI Get Target Info.
  811. [ 33.923209] Chip id: 0x7, chip version: 0x4100016d
  812. [ 33.927712]
  813. [ 33.927712] CE WAR Disabled
  814. [ 33.932713] NUM_DEV=1 FWMODE=0x2 FWSUBMODE=0x0 FWBR_BUF 0
  815. [ 33.937023] ol_target_init() configure Target .
  816. [ 33.942653] ol_transfer_bin_file: flash data file defined
  817. [ 33.946552] ol_transfer_bin_file[3879] Get Caldata for wifi2.
  818. [ 33.952418] qdf_fs_read[59], Open File /tmp/wifi2.caldata SUCCESS!!file system magic:16914836super blocksize:4096inode 4370file size:12064qdf_fs_read[79]: caldata data size mismatch, fsize=12064, cal_size=2116ol_transfer_bin_file 3940: Download Flash data len 2116
  819. [ 33.976327] Board extended Data download address: 0x0
  820. [ 33.985308] ol_download_cal_data: Board data file: 4 successfully downloaded, download address: 00401cc0
  821. [ 33.986310]
  822. [ 33.986310] Mission mode: Firmware CHIP Version 0
  823. [ 33.996018] ol_transfer_bin_file: Downloading firmware file: AR9887/athwlan.bin
  824. [ 34.002270] ol_transfer_bin_file 3750: downloading file 1, Download data len 234352
  825. [ 34.106115] Switching to Tx Mode-1 Threshold 280
  826. [ 34.156701] [wifi0] FWLOG: [22897] WAL_DBGID_RST_STATS ( 0x1, 0x1, 0x96c, 0x0 )
  827. [ 34.162536] [wifi0] FWLOG: [22967] WAL_DBGID_TX_AC_BUFFER_SET ( 0x3, 0x1e, 0x94c, 0x94c, 0x0 )
  828. [ 34.171169] [wifi0] FWLOG: [22967] WAL_DBGID_TX_AC_BUFFER_SET ( 0x12, 0x1e, 0x94c, 0x94c, 0x0 )
  829. [ 34.179809] [wifi0] FWLOG: [22967] WAL_DBGID_TX_AC_BUFFER_SET ( 0x45, 0x1e, 0x94c, 0x94c, 0x0 )
  830. [ 34.188489] [wifi0] FWLOG: [22967] WAL_DBGID_TX_AC_BUFFER_SET ( 0x67, 0x1e, 0x94c, 0x94c, 0x0 )
  831. [ 34.197172] [wifi0] FWLOG: [23000] WAL_DBGID_RST_STATS ( 0x2, 0x2, 0x96c, 0x0 )
  832. [ 34.204462] [wifi0] FWLOG: [23013] WAL_DBGID_PDEV_INFO_PRINT ( 0xc001c001, 0x1 )
  833. [ 34.211896] [wifi0] FWLOG: [23042] WAL_DBGID_PDEV_INFO_PRINT ( 0x3a, 0xa10, 0x160, 0x0, 0x12 )
  834. [ 35.037213] ol_target_init() Download FW done.
  835. [ 35.037347] ol_ath_attach() WMI attached. wmi_handle dc9aa000
  836. [ 35.040765] wmi_unified_register_event_handler: Event id 62 is unavailable
  837. [ 35.046482] +htc_create .. HIF :d7fc0000-htc_create: (0xdc92c800)
  838. [ 35.057055] htc_wmi_init() HT Create . dc92c800
  839. [ 35.059625] htc_wmi_init 7948 host_enable 1 nss_nwifi_offload 0
  840. [ 35.063977] ol_ath_set_default_tgt_config : AC Minfree buffer allocation through module param (umac.ko)
  841. [ 35.069839] OL_ACBKMinfree : 0
  842. [ 35.079280] OL_ACBEMinfree : 0
  843. [ 35.082370] OL_ACVIMinfree : 0
  844. [ 35.085435] OL_ACVOMinfree : 0
  845. [ 35.088693] hif_enable_fastpath, Enabling fastpath mode
  846. [ 35.091820] +HWT
  847. [ 35.097052] hif_completion_thread_startup: pipe_num:0 pipe_info:0xd7fc4878hif_completion_thread_startup: pipe_num:3 pipe_info:0xd7fc4950hif_completion_thread_startup: pipe_num:4 pipe_info:0xd7fc4998
  848. [ 35.113199] -HWT
  849. [ 35.116507] Startup Mode-0 set
  850. [ 35.118424]
  851. [ 35.118424] <=== cfg max peer id 1056 ====>
  852. [ 35.121886] htt_peer_map_timer_init Enter pdev d78a8000 hrtimer d78aa618
  853. [ 35.127176]
  854. [ 35.127176] htt_alloc_peer_map_mem : Alloc Success : host q vaddr dd4b2000 paddr 5f4b2000
  855. [ 35.134084]
  856. [ 35.134084] htt_alloc_peer_map_mem : Flush Interval Configured to 256 pkts
  857. [ 35.144517] ol_txrx_pdev_attach: 1424 tx desc's allocated ; range starts from d7450000
  858. [ 35.153112] Firmware_Build_Number:0
  859. [ 35.159728] host/RAM_fw Build Ver Mismatch: H:0x32, F:0x0 !
  860. [ 35.163641] FW wireless modes: 0x1ff80d
  861. [ 35.169093] num_rf_chain:0x00000001 ht_cap_info:0x0000085b vht_cap_info:0x338001b2 vht_supp_mcs:0x0000fffe
  862. [ 35.180649] wmi_service_coex_gpio 0, wmi_service_4_wire_coex_support 0, coex_version 0
  863. [ 35.182927]
  864. [ 35.182927] Sending Ext resource cfg: HOST PLATFORM as 1
  865. [ 35.182927] fw_feature_bitmap as 50 to TGT
  866. [ 35.190789] ol_ath_service_ready_event: tt_support: 0
  867. [ 35.201591] ol_ath_service_ready_event: periodic_chan_stats: 1
  868. [ 35.206515] ol_ath_service_ready_event: sw_cal_support_check_flag: 0
  869. [ 35.212369] LARGE_AP enabled. num_peers 144, num_vdevs 16, num_tids 256
  870. [ 35.218812] idx 0 req 1 num_units 0 num_unit_info 2 unit size 404 actual units 145
  871. [ 35.225176] Support not added yet for Service 91
  872. [ 35.233085] Support not added yet for Service 92
  873. [ 35.237662] No EXT_MSG send INIT now
  874. [ 35.242289] chunk 0 len 58580 requested , ptr 0x594a0000
  875. [ 35.252655] FIRMWARE:P 145 V 16 T 443
  876. [ 35.252655]
  877. [ 35.257876] Version = 16777216 3 status = 0
  878. [ 35.257919] ol_ath_connect_htc() WMI is ready
  879. [ 35.261310] htt_h2t_frag_desc_bank_cfg_msg - HTT_H2T_MSG_TYPE_FRAG_DESC_BANK_CFG sent to FW for radio ID = 2
  880. [ 35.265527] target uses HTT version 2.2; host uses 2.2
  881. [ 35.280533] : ol_ath_attach :wmi_pdev_param_xlnawar_enable FW sent
  882. [ 35.280563] ol_ath_attach() connect HTC.
  883. [ 35.286562] bypasswmi : 0
  884. [ 35.290737] ol_regdmn_start: reg-domain param: regdmn=0, countryName=, wModeSelect=FFFFFFFF, netBand=FFFFFFFF, extendedChanMode=0.
  885. [ 35.293414] Skipping VHT80 channel 5825
  886. [ 35.305513] freq=58
  887. [ 35.308670] freq=106
  888. [ 35.311134] freq=122
  889. [ 35.313270] acfg_attach: Offload using existing sock cc3d7400
  890. [ 35.315555] SPECTRAL : get_capability not registered
  891. [ 35.321265] HAL_CAP_PHYDIAG : Capable
  892. [ 35.326289] SPECTRAL : Need to fix the capablity check for RADAR (spectral_attach : 237)
  893. [ 35.329861] SPECTRAL : get_capability not registered
  894. [ 35.338073] HAL_CAP_RADAR : Capable
  895. [ 35.342973] SPECTRAL : Need to fix the capablity check for SPECTRAL
  896. [ 35.342973] (spectral_attach : 242)
  897. [ 35.346528] SPECTRAL : get_capability not registered
  898. [ 35.356485] HAL_CAP_SPECTRAL_SCAN : Capable
  899. [ 35.361374] SPECTRAL : get_tsf64 not registered
  900. [ 35.365273] spectral_init_netlink 78 NULL SKB
  901. [ 35.369779] Green-AP : Green-AP : Attached
  902. [ 35.369779]
  903. [ 35.374444] Green-AP : Attached
  904. [ 35.379869] ol_if_dfs_attach: called; ptr=d74e998c, radar_info=d8875bf0
  905. [ 35.382843] dfs_attach: event log enabled by default
  906. [ 35.389672] >>>> CB Set 51] Set freq vap 1 stop send + d7fc8000
  907. [ 36.993429] Set fr51] Set freq vap 1 stop send + d7fc8000
  908. [ 36.993429] Set fr51] Set freq vap 1 stop send + d7fc8000
  909. [ 36.993429] Set fr51] Set freq vap 1 stop send + d7fc8000
  910. [ 36.993429] Set freq vap 1 stop send -d7fc8000
  911. eq vap 1 stop send -d7fc8000
  912. eq vap 1 stop send -d7fc8000
  913. eq vap 1 stop send -d7fc8000
  914. eq vap 1 stop send -d7fc8000
  915. [ 37.020520] Set wait done --d7fc8000
  916. [ 37.020541] Set fr[ 37.020520] Set wait done --d7fc8000
  917. [ 37.020541] Set fr[ 37.020520] Set wait done --d7fc8000
  918. [ 37.020541] Set fr[ 37.020520] Set wait done --d7fc8000
  919. [ 37.020541] Set fr[ 37.020520] Set wait done --d7fc8000
  920. [ 37.020541] Set fr[ 37.020520] Set wait done --d7fc8000
  921. [ 37.020541] Set fr[ 37.020520] Set wait done --d7fc8000
  922. [ 37.020541] Set fr[ 37.020520] Set wait done --d7fc8000
  923. [ 37.020541] Set fr[ 37.020520] Set wait done --d7fc8000
  924. [ 37.020541] Set fr[ 37.020520] Set wait done --d7fc8000
  925. [ 37.020541] Set fr[ 37.020520] Set wait done --d7fc8000
  926. [ 37.020541] Set fr[ 37.020520] Set wait done --d7fc8000
  927. [ 37.020541] Set fr[ 37.020520] Set wait done --d7fc8000
  928. [ 37.020541] Set fr[ 37.020520] Set wait done --d7fc8000
  929. [ 37.020541] Set fr[ 37.020520] Set wait done --d7fc8000
  930. [ 37.020541] Set fr[ 37.020520] Set wait done --d7fc8000
  931. [ 37.020541] Set fr[ 37.020520] Set wait done --d7fc8000
  932. [ 37.020541] Set fr[ 37.020520] Set wait done --d7fc8000
  933. [ 37.020541] Set fr[ 37.020520] Set wait done --d7fc8000
  934. [ 37.020541] Set fr[ 37.020520] Set wait done --d7fc8000
  935. [ 37.020541] Set fr[ 37.020520] Set wait done --d7fc8000
  936. [ 37.020541] Set fr[ 37.020520] Set wait done --d7fc8000
  937. [ 37.020541] Set fr[ 37.020520] Set wait done --d7fc8000
  938. [ 37.020541] Set fr[ 37.020520] Set wait done --d7fc8000
  939. [ 37.020541] Set fr[ 37.020520] Set wait done --d7fc8000
  940. [ 37.020541] Set fr[ 37.020520] Set wait done --d7fc8000
  941. [ 37.020541] Set fr[ 37.020520] Set wait done --d7fc8000
  942. [ 37.020541] Set fr[ 37.020520] Set wait done --d7fc8000
  943. [ 37.020541] Set fr[ 37.020520] Set wait done --d7fc8000
  944. [ 37.020541] Set fr[ 37.020520] Set wait done --d7fc8000
  945. [ 37.020541] Set fr[ 37.020520] Set wait done --d7fc8000
  946. [ 37.020541] Set fr[ 37.020520] Set wait done --d7fc8000
  947. [ 37.020541] Set fr[ 37.020520] Set wait done --d7fc8000
  948. [ 37.020541] Set fr[ 37.020520] Set wait done --d7fc8000
  949. [ 37.020541] Set fr[ 37.020520] Set wait done --d7fc8000
  950. [ 37.020541] Set fr[ 37.020520] Set wait done --d7fc8000
  951. [ 37.020541] Set fr[ 37.020520] Set wait done --d7fc8000
  952. [ 37.020541] Set fr[ 37.020520] Set wait done --d7fc8000
  953. [ 37.020541] Set fr[ 37.020520] Set wait done --d7fc8000
  954. [ 37.020541] Set fr[ 37.020520] Set wait done --d7fc8000
  955. [ 37.020541] Set fr[ 37.020520] Set wait done --d7fc8000
  956. [ 37.020541] Set fr[ 37.020520] Set wait done --d7fc8000
  957. [ 37.020541] Set fr[ 37.020520] Set wait done --d7fc8000
  958. [ 37.020541] Set fr[ 37.020520] Set wait done --d7fc8000
  959. [ 37.020541] Set fr[ 37.020520] Set wait done --d7fc8000
  960. [ 37.020541] Set fr[ 37.020520] Set wait done --d7fc8000
  961. [ 37.020541] Set fr[ 37.020520] Set wait done --d7fc8000
  962. [ 37.020541] Set fr[ 37.020520] Set wait done --d7fc8000
  963. [ 37.020541] Set fr[ 37.020520] Set wait done --d7fc8000
  964. [ 37.020541] Set fr[ 37.020520] Set wait done --d7fc8000
  965. [ 37.020541] Set fr[ 37.020520] Set wait done --d7fc8000
  966. [ 37.020541] Set fr[ 37.020520] Set wait done --d7fc8000
  967. [ 37.020541] Set fr[ 37.020520] Set wait done --d7fc8000
  968. [ 37.020541] Set fr[ 37.020520] Set wait done --d7fc8000
  969. [ 37.020541] Set fr[ 37.020520] Set wait done --d7fc8000
  970. [ 37.020541] Set fr[ 37.020520] Set wait done --d7fc8000
  971. [ 37.020541] Set fr[ 37.020520] Set wait done --d7fc8000
  972. [ 37.020541] Set fr[ 37.020520] Set wait done --d7fc8000
  973. [ 37.020541] Set fr[ 37.020520] Set wait done --d7fc8000
  974. [ 37.020541] Set fr[ 37.020520] Set wait done --d7fc8000
  975. [ 37.020541] Set fr[ 37.020520] Set wait done --d7fc8000
  976. [ 37.020541] Set fr[ 37.020520] Set wait done --d7fc8000
  977. [ 37.020541] Set fr[ 37.020520] Set wait done --d7fc8000
  978. [ 37.020541] Set fr[ 37.020520] Set wait done --d7fc8000
  979. [ 37.020541] Set frtop send -d75a0000
  980. [ 37.050506] Set wait done --d75a0000
  981. [ 37.050532] Set freq vap 3 stop send + d74c8000
  982. [ 37.053431] Set freq vap 3 stop send -d74c8000
  983. [ 37.080513] Set wait done --d74c8000
  984. [ 37.080533] Set freq vap 4 stop send + d7610000
  985. [ 37.083408] Set freq vap 4 stop send -d7610000
  986. [ 37.110519] Set wait done --d7610000
  987. [ 37.150057] send_vdev_create_cmd_non_tlv: ID = 5 Type = 1, Subtype = 0 VAP Addr = 1a:8d:db:7a:35:33:
  988. [ 37.150149] su bfee 0 mu bfee 0 su bfer 0 mu bfer 0 impl bf 1 sounding dim 0
  989. [ 37.170477] [wifi0] FWLOG: [25735] WAL_DBGID_PDEV_INFO_PRINT ( 0x3b, 0x199, 0x160, 0x0, 0x32 )
  990. [ 37.177525] [wifi0] FWLOG: [25747] WAL_DBGID_RST_STATS ( 0x2
  991. [ 37.183588] ieee80211_mbo_vattach:MBO Initialized
  992. [ 37.183698] ieee80211_oce_vattach: OCE Initialized
  993. [ 37.188652] Enabling SG bit for the vap apr0v5 features 4000
  994. [ 37.197410] , 0x2
  995. [ 37.200754] Enabling SG bit for the vap apr0v5 features 4000
  996. [ 37.200973] Enabling LRO bit for the vap apr0v5 features 4000
  997. [ 37.206809] ,
  998. [ 37.215993] VAP device apr0v5 created osifp: (d75ea4c0) os_if: (d7660000)
  999. [ 37.220538] 0x96c, 0x0 )
  1000. [ 37.223998] [wifi0] FWLOG: [25760] WAL_DBGID_PDEV_INFO_PRINT (
  1001. [ 37.233203] Set freq vap 0 stop send + d75f8000
  1002. [ 37.233334] Set freq vap 0 stop send -d75f8000
  1003. [ 37.235430] 0xc001c001, 0x1 )
  1004. [ 37.235443] [wifi0] FWLOG: [25796] WAL_DBGID_RST_STATS ( 0x2, 0x2, 0x96c, 0x0 )
  1005. [ 37.235452] [wifi0] FWLOG: [25809] WAL_DBGID_PDEV_INFO_PRINT ( 0xc001c001, 0x1 )
  1006. [ 37.284226] Set wait done --d75f8000
  1007. [ 37.284246] Set freq vap 1 stop send + d7fc8000
  1008. [ 37.287017] Set freq vap 1 stop send -d7fc8000
  1009. [ 37.320462] Set wait done --d7fc8000
  1010. [ 37.320481] Set freq vap 2 stop send + d75a0000
  1011. [ 37.323238] Set freq vap 2 stop send -d75a0000
  1012. [ 37.350481] Set wait done --d75a0000
  1013. [ 37.350498] Set freq vap 3 stop send + d74c8000
  1014. [ 37.353227] Set freq vap 3 stop send -d74c8000
  1015. [ 37.380471] Set wait done --d74c8000
  1016. [ 37.380489] Set freq vap 4 stop send + d7610000
  1017. [ 37.383215] Set freq vap 4 stop send -d7610000
  1018. [ 37.410461] Set wait done --d7610000
  1019. [ 37.410479] Set freq vap 5 stop send + d7660000
  1020. [ 37.413197] Set freq vap 5 stop send -d7660000
  1021. [ 37.440482] Set wait done --d7660000
  1022. [ 37.478157] send_vdev_create_cmd_non_tlv: ID = 6 Type = 1, Subtype = 0 VAP Addr = 16:8d:db:7a:35:33:
  1023. [ 37.478250] su bfee 0 mu bfee 0 su bfer 0 mu bfer 0 impl bf 1 sounding dim 0
  1024. [ 37.486806] ieee80211_mbo_vattach:MBO Initialized
  1025. [ 37.500567] ieee80211_oce_vattach: OCE Initialized
  1026. [ 37.500677] Enabling SG bit for the vap apr0v6 features 4000
  1027. [ 37.504292] Enabling SG bit for the vap apr0v6 features 4000
  1028. [ 37.510196] Enabling LRO bit for the vap apr0v6 features 4000
  1029. [ 37.517407] VAP device apr0v6 created osifp: (d75eacc0) os_if: (d7688000)
  1030. [ 37.533274] Set freq vap 0 stop send + d75f8000
  1031. [ 37.533405] Set freq vap 0 stop send -d75f8000
  1032. [ 37.560478] Set wait done --d75f8000
  1033. [ 37.560499] Set freq vap 1 stop send + d7fc8000
  1034. [ 37.563264] Set freq vap 1 stop send -d7fc8000
  1035. [ 37.590471] Set wait done --d7fc8000
  1036. [ 37.590489] Set freq vap 2 stop send + d75a0000
  1037. [ 37.593246] Set freq vap 2 stop send -d75a0000
  1038. [ 37.620460] Set wait done --d75a0000
  1039. [ 37.620479] Set freq vap 3 stop send + d74c8000
  1040. [ 37.623238] Set freq vap 3 stop send -d74c8000
  1041. [ 37.650481] Set wait done --d74c8000
  1042. [ 37.650501] Set freq vap 4 stop send + d7610000
  1043. [ 37.653255] Set freq vap 4 stop send -d7610000
  1044. [ 37.680469] Set wait done --d7610000
  1045. [ 37.680490] Set freq vap 5 stop send + d7660000
  1046. [ 37.683251] Set freq vap 5 stop send -d7660000
  1047. [ 37.710459] Set wait done --d7660000
  1048. [ 37.710478] Set freq vap 6 stop send + d7688000
  1049. [ 37.713195] Set freq vap 6 stop send -d7688000
  1050. [ 37.740481] Set wait done --d7688000
  1051. [ 37.778243] send_vdev_create_cmd_non_tlv: ID = 7 Type = 1, Subtype = 0 VAP Addr = 12:8d:db:7a:35:33:
  1052. [ 37.778334] su bfee 0 mu bfee 0 su bfer 0 mu bfer 0 impl bf 1 sounding dim 0
  1053. [ 37.786672] ieee80211_mbo_vattach:MBO Initialized
  1054. [ 37.793620] ieee80211_oce_vattach: OCE Initialized
  1055. [ 37.798322] Enabling SG bit for the vap apr0v7 features 4000
  1056. [ 37.803016] Enabling SG bit for the vap apr0v7 features 4000
  1057. [ 37.808815] Enabling LRO bit for the vap apr0v7 features 4000
  1058. [ 37.815833] VAP device apr0v7 created osifp: (d75eb4c0) os_if: (db9d8000)
  1059. [ 37.827877] Set freq vap 0 stop send + d75f8000
  1060. [ 37.828106] Set freq vap 0 stop send -d75f8000
  1061. [ 37.860501] Set wait done --d75f8000
  1062. [ 37.860523] Set freq vap 1 stop send + d7fc8000
  1063. [ 37.863387] Set freq vap 1 stop send -d7fc8000
  1064. [ 37.890529] Set wait done --d7fc8000
  1065. [ 37.890549] Set freq vap 2 stop send + d75a0000
  1066. [ 37.893406] Set freq vap 2 stop send -d75a0000
  1067. [ 37.920495] Set wait done --d75a0000
  1068. [ 37.920513] Set freq vap 3 stop send + d74c8000
  1069. [ 37.923369] Set freq vap 3 stop send -d74c8000
  1070. [ 37.950491] Set wait done --d74c8000
  1071. [ 37.950511] Set freq vap 4 stop send + d7610000
  1072. [ 37.953349] Set freq vap 4 stop send -d7610000
  1073. [ 37.980497] Set wait done --d7610000
  1074. [ 37.980516] Set freq vap 5 stop send + d7660000
  1075. [ 37.983336] Set freq vap 5 stop send -d7660000
  1076. [ 38.010504] Set wait done --d7660000
  1077. [ 38.010525] Set freq vap 6 stop send + d7688000
  1078. [ 38.013367] Set freq vap 6 stop send -d7688000
  1079. [ 38.040478] Set wait done --d7688000
  1080. [ 38.040497] Set freq vap 7 stop send + db9d8000
  1081. [ 38.043328] Set freq vap 7 stop send -db9d8000
  1082. [ 38.070517] Set wait done --db9d8000
  1083. [ 38.107633] send_vdev_create_cmd_non_tlv: ID = 8 Type = 1, Subtype = 0 VAP Addr = 2e:8d:db:7a:35:33:
  1084. [ 38.107731] su bfee 0 mu bfee 0 su bfer 0 mu bfer 0 impl bf 1 sounding dim 0
  1085. [ 38.124293] ieee80211_mbo_vattach:MBO Initialized
  1086. [ 38.124315] ieee80211_oce_vattach: OCE Initialized
  1087. [ 38.128114] Enabling SG bit for the vap apr0v8 features 4000
  1088. [ 38.133121] Enabling SG bit for the vap apr0v8 features 4000
  1089. [ 38.138713] Enabling LRO bit for the vap apr0v8 features 4000
  1090. [ 38.145913] VAP device apr0v8 created osifp: (d75edcc0) os_if: (d7640000)
  1091. [ 38.163561] Set freq vap 0 stop send + d75f8000
  1092. [ 38.163700] Set freq vap 0 stop send -d75f8000
  1093. [ 38.190505] Set wait done --d75f8000
  1094. [ 38.190524] Set freq vap 1 stop send + d7fc8000
  1095. [ 38.193283] Set freq vap 1 stop send -d7fc8000
  1096. [ 38.230481] Set wait done --d7fc8000
  1097. [ 38.230500] Set freq vap 2 stop send + d75a0000
  1098. [ 38.233263] Set freq vap 2 stop send -d75a0000
  1099. [ 38.260469] Set wait done --d75a0000
  1100. [ 38.260487] Set freq vap 3 stop send + d74c8000
  1101. [ 38.263221] Set freq vap 3 stop send -d74c8000
  1102. [ 38.290455] Set wait done --d74c8000
  1103. [ 38.290475] Set freq vap 4 stop send + d7610000
  1104. [ 38.293206] Set freq vap 4 stop send -d7610000
  1105. [ 38.320478] Set wait done --d7610000
  1106. [ 38.320495] Set freq vap 5 stop send + d7660000
  1107. [ 38.323225] Set freq vap 5 stop send -d7660000
  1108. [ 38.350490] Set wait done --d7660000
  1109. [ 38.350514] Set freq vap 6 stop send + d7688000
  1110. [ 38.353356] Set freq vap 6 stop send -d7688000
  1111. [ 38.380475] Set wait done --d7688000
  1112. [ 38.380496] Set freq vap 7 stop send + db9d8000
  1113. [ 38.383270] Set freq vap 7 stop send -db9d8000
  1114. [ 38.410484] Set wait done --db9d8000
  1115. [ 38.410502] Set freq vap 8 stop send + d7640000
  1116. [ 38.413227] Set freq vap 8 stop send -d7640000
  1117. [ 38.440476] Set wait done --d7640000
  1118. [ 38.489710] send_vdev_create_cmd_non_tlv: ID = 9 Type = 1, Subtype = 0 VAP Addr = 2a:8d:db:7a:35:33:
  1119. [ 38.489812] su bfee 0 mu bfee 0 su bfer 0 mu bfer 0 impl bf 1 sounding dim 0
  1120. [ 38.510612] ieee80211_mbo_vattach:MBO Initialized
  1121. [ 38.510636] ieee80211_oce_vattach: OCE Initialized
  1122. [ 38.514537] Enabling SG bit for the vap apr0v9 features 4000
  1123. [ 38.519184] Enabling SG bit for the vap apr0v9 features 4000
  1124. [ 38.528942] Enabling LRO bit for the vap apr0v9 features 4000
  1125. [ 38.531968] VAP device apr0v9 created osifp: (d75ee4c0) os_if: (d8670000)
  1126. [ 38.546116] Set freq vap 0 stop send + d75f8000
  1127. [ 38.546254] Set freq vap 0 stop send -d75f8000
  1128. [ 38.570572] Set wait done --d75f8000
  1129. [ 38.570591] Set freq vap 1 stop send + d7fc8000
  1130. [ 38.573454] Set freq vap 1 stop send -d7fc8000
  1131. [ 38.600513] Set wait done --d7fc8000
  1132. [ 38.600534] Set freq vap 2 stop send + d75a0000
  1133. [ 38.603362] Set freq vap 2 stop send -d75a0000
  1134. [ 38.630476] Set wait done --d75a0000
  1135. [ 38.630494] Set freq vap 3 stop send + d74c8000
  1136. [ 38.633321] Set freq vap 3 stop send -d74c8000
  1137. [ 38.660518] Set wait done --d74c8000
  1138. [ 38.660536] Set freq vap 4 stop send + d7610000
  1139. [ 38.663410] Set freq vap 4 stop send -d7610000
  1140. [ 38.690488] Set wait done --d7610000
  1141. [ 38.690507] Set freq vap 5 stop send + d7660000
  1142. [ 38.693340] Set freq vap 5 stop send -d7660000
  1143. [ 38.720495] Set wait done --d7660000
  1144. [ 38.720513] Set freq vap 6 stop send + d7688000
  1145. [ 38.723350] Set freq vap 6 stop send -d7688000
  1146. [ 38.750500] Set wait done --d7688000
  1147. [ 38.750519] Set freq vap 7 stop send + db9d8000
  1148. [ 38.753361] Set freq vap 7 stop send -db9d8000
  1149. [ 38.780511] Set wait done --db9d8000
  1150. [ 38.780530] Set freq vap 8 stop send + d7640000
  1151. [ 38.783368] Set freq vap 8 stop send -d7640000
  1152. [ 38.810482] Set wait done --d7640000
  1153. [ 38.810500] Set freq vap 9 stop send + d8670000
  1154. [ 38.813321] Set freq vap 9 stop send -d8670000
  1155. [ 38.840488] Set wait done --d8670000
  1156. [ 38.874484] send_vdev_create_cmd_non_tlv: ID = 10 Type = 1, Subtype = 0 VAP Addr = 26:8d:db:7a:35:33:
  1157. [ 38.874578] su bfee 0 mu bfee 0 su bfer 0 mu bfer 0 impl bf 1 sounding dim 0
  1158. [ 38.882958] ieee80211_mbo_vattach:MBO Initialized
  1159. [ 38.889875] ieee80211_oce_vattach: OCE Initialized
  1160. [ 38.894688] Enabling SG bit for the vap apr0v10 features 4000
  1161. [ 38.899268] Enabling SG bit for the vap apr0v10 features 4000
  1162. [ 38.905270] Enabling LRO bit for the vap apr0v10 features 4000
  1163. [ 38.911998] VAP device apr0v10 created osifp: (d75e94c0) os_if: (d7698000)
  1164. [ 38.921922] Set freq vap 0 stop send + d75f8000
  1165. [ 38.923928] Set freq vap 0 stop send -d75f8000
  1166. [ 38.950564] Set wait done --d75f8000
  1167. [ 38.950585] Set freq vap 1 stop send + d7fc8000
  1168. [ 38.953476] Set freq vap 1 stop send -d7fc8000
  1169. [ 38.980520] Set wait done --d7fc8000
  1170. [ 38.980538] Set freq vap 2 stop send + d75a0000
  1171. [ 38.983373] Set freq vap 2 stop send -d75a0000
  1172. [ 39.010479] Set wait done --d75a0000
  1173. [ 39.010499] Set fre
  1174.  
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!